Merge remote-tracking branch 'origin/develop' into NR_remove_ssb_offset_from_configfile
This commit is contained in:
francescomani
@@ -193,6 +193,7 @@ Using the help option of the build script you can get the list of available opti
|
||||
| --UE | maintained and tested in CI | build `lte-uesoftmodem` the LTE UE |
|
||||
| --gNB | maintained and tested in CI | build `nr-softmodem` the 5G gNodeB |
|
||||
| --nrUE | maintained and tested in CI | build `nr-uesoftmodem` the 5G UE |
|
||||
| --arch-native | maintained | build with native architecture optimization |
|
||||
| --usrp-recplay | deprecated | use the USRP configuration parameters to use the record player. |
|
||||
| --build-lib | maintained | build optional shared library(ies), which can then be loaded at run time via command line option. Use the --help option to get the list of supported optional libraries. `all` can be used to build all available optional libraries. |
|
||||
| --UE-conf-nvram | maintained | Specifies the path to the input file used by the conf2uedata utility. defaults to [openair3/NAS/TOOLS/ue_eurecom_test_sfr.conf](../openair3/NAS/TOOLS/ue_eurecom_test_sfr.conf) |
|
||||
|
||||
@@ -332,6 +332,9 @@ The following features are valid for the gNB and the 5G-NR UE.
|
||||
- evalution of RSRP report
|
||||
- evaluation of CQI report
|
||||
- MAC scheduling of SR reception
|
||||
- Bandwidth part (BWP) operation
|
||||
- Handle multiple dedicated BWPs
|
||||
- BWP switching through RRCReconfiguration method
|
||||
|
||||
**gNB RLC**
|
||||
- Send/Receive operations according to 38.322 Rel.16
|
||||
@@ -493,6 +496,8 @@ The following features are valid for the gNB and the 5G-NR UE.
|
||||
- Configuration of fapi PDU according to DCI
|
||||
* Scheduler procedures for SRS transmission
|
||||
- Periodic SRS transmission
|
||||
* Bandwidth part (BWP) operation
|
||||
- Operation in configured dedicated BWP through RRCSetup or RRCReconfiguration
|
||||
|
||||
|
||||
**UE RLC**
|
||||
|
||||
@@ -207,7 +207,24 @@ UE on machine 2:
|
||||
|
||||
`sudo ./nr-uesoftmodem --if_freq 2169080000 --if_freq_off -400000000`
|
||||
|
||||
# MIMO configuration
|
||||
|
||||
<table style="border-collapse: collapse; border: none;">
|
||||
<tr style="border-collapse: collapse; border: none;">
|
||||
<td style="border-collapse: collapse; border: none;">
|
||||
<img src="./images/mimo_antenna_ports.png" alt="" border=3 height=100 width=300>
|
||||
</img>
|
||||
</td>
|
||||
</tr>
|
||||
</table>
|
||||
|
||||
This image shows an example of gNB 5G MIMO logical antenna port configuration. It has to be noted that logical antenna ports might not directly correspond to physical antenna ports and each logical antenna port might consist of a sub-array of antennas.
|
||||
|
||||
The basic element is a dual-polarized antenna, therefore the minimal DL MIMO setup with two logical antenna ports would consist of two cross-polarized antenna elements. In a single panel configuration, as the one in the picture, this element can be repeated vertiacally and/or horizontally to form an equi-spaced 1D or 2D array. The values N1 and N2 represent the number of antenna ports in the two dimensions and the supported configurations are specified in Section 5.2.2.2.1 of TS 38.214.
|
||||
|
||||
The DL logical antenna port configuration can be selected through configuration file. `pdsch_AntennaPorts_N1` can be used to set N1 parameter, `pdsch_AntennaPorts_N2` to set N2 and `pdsch_AntennaPorts_XP` to set the cross-polarization configuration (1 for single pol, 2 for cross-pol). To be noted that if XP is 1 but N1 and/or N2 are larger than 1, this would result in a non-standard configuration and the PMI selected would be the identity matrix regardless of CSI report. The default value for each of these parameters is 1.
|
||||
|
||||
# Additional links
|
||||
|
||||
[Selecting an alternative ldpc implementation at run time](../openair1/PHY/CODING/DOC/LDPCImplementation.md)
|
||||
|
||||
|
||||
@@ -0,0 +1,51 @@
|
||||
# Procedure to add dedicated Bandwidth part (BWP)
|
||||
|
||||
## Contributed by 5G Testbed IISc
|
||||
|
||||
### Developers: Abhijith A, Shruthi S
|
||||
|
||||
# Terminology #
|
||||
|
||||
## Bandwidth part (BWP) ##
|
||||
Bandwidth Part (BWP) is a set of contiguous Resource Blocks in the resource grid.
|
||||
|
||||
Parameters of a BWP are communicated to UE using RRC parameters: BWP-Downlink and BWP-Uplink.
|
||||
|
||||
A UE can be configured with a set of 4 BWPs in uplink (UL) and downlink (DL) direction (3GPP TS 38.331 Annex B.2 Description of BWP configuration options). But only 1 BWP can be active in UL and DL direction at a given time.
|
||||
|
||||
# Procedure to run multiple dedicated BWPs #
|
||||
|
||||
A maximum of 4 dedicated BWPs can be configured for a UE.
|
||||
|
||||
To configure multiple BWPs, add the following parameters to the gNB configuration file under "servingCellConfigDedicated":
|
||||
|
||||
## Setup of the Configuration files ##
|
||||
```
|
||||
firstActiveDownlinkBWP-Id = 1; #BWP-Id
|
||||
defaultDownlinkBWP-Id = 1; #BWP-Id
|
||||
firstActiveUplinkBWP-Id = 1; #BWP-Id
|
||||
```
|
||||
|
||||
Each dedicated BWP must have:
|
||||
```
|
||||
# BWP 1 Configuration
|
||||
dl_bwp-Id_1 = 1;
|
||||
dl_bwp1_locationAndBandwidth = 28875; // RBstart=0, L=106 (40 MHz BW)
|
||||
# subcarrierSpacing
|
||||
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
||||
dl_bwp1_subcarrierSpacing = 1;
|
||||
```
|
||||
|
||||
Find these parameters in this configuration file: "targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.106PRB.usrpb210.conf"
|
||||
|
||||
# Testing gNB and UE in RF simulator
|
||||
|
||||
## gNB command:
|
||||
```
|
||||
sudo ./nr-softmodem -O ../../../targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.106PRB.usrpb210.conf --gNBs.[0].min_rxtxtime 6 --rfsim --sa
|
||||
```
|
||||
|
||||
## UE command:
|
||||
```
|
||||
sudo RFSIMULATOR=127.0.0.1 ./nr-uesoftmodem -r 106 --numerology 1 --band 78 -C 3619200000 --nokrnmod --rfsim --sa --uicc0.imsi 208990000000001
|
||||
```
|
||||
+148
-29
@@ -1,45 +1,164 @@
|
||||
## Table of Contents ##
|
||||
|
||||
1. [Legacy 1 Bench](#legacy-1-bench)
|
||||
2. [Legacy 2 Bench](#legacy-2-bench)
|
||||
3. [Next Bench for DEV](#next-bench-for-dev)
|
||||
4. [Next Bench for CI](#next-bench-for-ci)
|
||||
5. [Indoor Live Network Bench](#indoor-live-network-bench)
|
||||
6. [Outdoor Live Network Bench](#outdoor-live-network-bench)
|
||||
1. [Machines](#machines)
|
||||
2. [Networked devices](#networked-devices)
|
||||
3. [Testbenches](#testbenches)
|
||||
4. [Pipelines](#pipelines)
|
||||
|
||||
## Machines
|
||||
|
||||
| Machine | IP address | Lockable Resource | Function | Connected devices |
|
||||
| ------------- | --------------- | --------------------- | ------------------ | ----------------------------------------------------- |
|
||||
| asterix | 172.21.16.127 | CI-Asterix-Usage | gNB | 173.21.19.14 |
|
||||
| obelix | 172.21.16.128 | CI-Obelix-Usage | eNB, UE (5G) | 172.21.19.13, X300 (192.168.60.2), B200mini (30C51EB) |
|
||||
| porcepix | 172.21.16.136 | CI-NSA-MiniBench | Executor, EPC, 5GC | -- |
|
||||
| nrmodule2 | 172.21.16.139 | CI-NSA-MiniBench | Quectel | Quectel module |
|
||||
| nepes | 172.21.16.137 | CI-NSA-MiniBench | gNB | B200mini (30C51D4) |
|
||||
| caracal | 172.21.16.132 | CI-Caracal | gNB/phytest | N300 (192.168.10.2) |
|
||||
| idefix | 172.21.16.135 | CI-NSA-MiniBench | Quectel | Quectel module |
|
||||
| amariue | 172.21.16.144 | CI-Amarisoft-UE-Usage | TBD | Amarisoft UE simulator |
|
||||
| bellatrix | 192.168.117.115 | CI-RAN-VM-Deployment | Executor | -- |
|
||||
| nano | 192.168.12.62 | CI-Bench-1-Phones | EPC, adb | 2x COTS (adb) |
|
||||
| hutch | 192.168.12.19 | CI-Bench-1-Phones | eNB (B7) | B200mini (30C5239) |
|
||||
| starsky | 192.168.12.18 | CI-Bench-1-Phones | eNB (B40) | b200mini (30A3E3C) |
|
||||
| carabe | 192.168.12.211 | CI-Bench-2-OAI-Phone | UE 4G (B) | B200mini (30AE8C9) |
|
||||
|
||||
Note: The available resources, and their current usage, is indicated here:
|
||||
- [Lockable resources of jenkins-oai](https://jenkins-oai.eurecom.fr/lockable-resources/):
|
||||
"New" Jenkins, i.e., with RAN-Container-Parent
|
||||
- [Lockable resources of open5glab jenkins](https://open5glab.eurecom.fr:8083/jenkins/lockable-resources/):
|
||||
"Old" Jenkins, i.e., with RAN-CI-Develop
|
||||
|
||||
## Networked devices
|
||||
|
||||
| Type | IP address (mgmt) |
|
||||
| ------------- | ----------------- |
|
||||
| USRP N310 | 172.21.19.14 |
|
||||
| USRP N310 | 172.21.19.13 |
|
||||
|
||||
## Testbenches
|
||||
|
||||
### OTA Testbench
|
||||
|
||||
[Proper image to be followed up. TBD: add antennas/circulators]
|
||||
|
||||
Note: obelix and porcepix are both used in the OTA testbench and the 5G
|
||||
NSA/Faraday Cage testbench!
|
||||
|
||||
|
||||
|
||||
[PDF version](testbenches_doc_resources/5g-ota-bench.pdf) | [LaTeX/TikZ version](testbenches_doc_resources/5g-ota-bench.tex) if you want to modify to reflect your setup
|
||||
|
||||
### 5G NSA/Faraday Cage Testbench
|
||||
|
||||
**Purpose**: Faraday cage 5G tests
|
||||
|
||||
Note: obelix and porcepix are both used in the OTA testbench and the 5G
|
||||
NSA/Faraday Cage testbench!
|
||||
|
||||
|
||||
|
||||
[PDF version](testbenches_doc_resources/5g-nsa-faraday-bench.pdf) | [LaTeX/TikZ version](testbenches_doc_resources/5g-nsa-faraday-bench.tex) if you want to modify to reflect your setup
|
||||
|
||||
### 4G Testbench(es)
|
||||
|
||||
**Purpose**: 4G/LTE testbenches
|
||||
|
||||
|
||||
## Legacy 1 Bench
|
||||
|
||||
|
||||
**Purpose** : FDD Band 7 and Band 13, LTE-M
|
||||
**Note** : Legacy1 and Legacy2 are duplicated so that they can run in parallel, thus avoiding a CI bottleneck
|
||||
**Note** : Faraday Cages 1 and 2 are physically the same cage
|
||||
[PDF version](testbenches_doc_resources/4g-faraday-bench.pdf) | [LaTeX/TikZ version](testbenches_doc_resources/4g-faraday-bench.tex) if you want to modify to reflect your setup
|
||||
|
||||
|
||||
## Pipelines
|
||||
|
||||
## Legacy 2 Bench
|
||||
### [RAN-Container-Parent](https://jenkins-oai.eurecom.fr/job/RAN-Container-Parent/)
|
||||
|
||||
**Purpose** : TDD Band 40, TM2 2xTX 2xRX
|
||||
**Note** : CN can run in a container, could also run on Massive
|
||||
**Purpose**: automatically triggered tests on MR creation or push, from Gitlab
|
||||
Webhook
|
||||
|
||||
|
||||
- [RAN-cppcheck](https://jenkins-oai.eurecom.fr/job/RAN-cppcheck/1664/)
|
||||
- obelix
|
||||
- performs static code analysis, currently not actively enforced
|
||||
- [RAN-gNB-nrUE-MONO-TDD-Band78-N300](https://jenkins-oai.eurecom.fr/job/RAN-gNB-nrUE-MONO-TDD-Band78-N300/)
|
||||
- caracal + N310
|
||||
- pure performance test through phy-test scheduler, see command line for more
|
||||
details
|
||||
- [RAN-L2-Sim-Test-5G](https://jenkins-oai.eurecom.fr/job/RAN-L2-Sim-Test-5G/)
|
||||
- obelix (gNB, 1x UE, OAI 5GC)
|
||||
- L2simulator: skips physical layer and uses proxy between gNB and UE,
|
||||
currently only ping
|
||||
- [RAN-NSA-B200-Module-LTEBOX-Container](https://jenkins-oai.eurecom.fr/job/RAN-NSA-B200-Module-LTEBOX-Container/)
|
||||
- obelix + B200, nepes + B200, idefix + Quectel, porcepix w/ ltebox
|
||||
- basic NSA test, known to be instable
|
||||
- [RAN-PhySim-Cluster](https://jenkins-oai.eurecom.fr/job/RAN-PhySim-Cluster/)
|
||||
- asterix (`Asterix-OC-oaicicd-session` resource), tests in OpenShift Cluster
|
||||
- unitary simulators (`nr_dlsim`, etc.)
|
||||
- [RAN-RF-Sim-Test-4G](https://jenkins-oai.eurecom.fr/job/RAN-RF-Sim-Test-4G/)
|
||||
- obelix (eNB, 1x UE, OAI EPC)
|
||||
- uses RFsimulator, for FDD 5, 10, 20MHz with core, 5MHz noS1
|
||||
- [RAN-RF-Sim-Test-5G](https://jenkins-oai.eurecom.fr/job/RAN-RF-Sim-Test-5G/)
|
||||
- obelix (gNB, 2x UE, OAI 5GC)
|
||||
- uses RFsimulator, TDD 40MHz, FDD 40MHz, F1 split
|
||||
- [RAN-RHEL8-Image-Builder](https://jenkins-oai.eurecom.fr/job/RAN-RHEL8-Image-Builder/)
|
||||
- asterix: RHEL 8 image build using podman
|
||||
- [RAN-Ubuntu18-Image-Builder](https://jenkins-oai.eurecom.fr/job/RAN-Ubuntu18-Image-Builder/)
|
||||
- obelix: Ubuntu 18 image build using docker
|
||||
|
||||
## Next Bench for DEV
|
||||
### [RAN-CI-NSA-Trigger](https://jenkins-oai.eurecom.fr/view/RAN/job/RAN-CI-NSA-Trigger/)
|
||||
|
||||
**Note** : Benetel CI can also run on this bench at night
|
||||
**Purpose**: longer-running over-the-air LTE, NSA, and SA tests, triggered
|
||||
through cron job at midnight
|
||||
|
||||
|
||||
- [RAN-LTE-2x2-Module-OAIEPC](https://jenkins-oai.eurecom.fr/job/RAN-LTE-2x2-Module-OAIEPC/)
|
||||
- obelix + N310, nrmodule2 + Quectel, porcepix w/ Magma EPC
|
||||
- LTE 2x2 test with TM1 and TM2
|
||||
- [RAN-NSA-B200-Module-LTEBOX](https://jenkins-oai.eurecom.fr/job/RAN-NSA-B200-Module-LTEBOX/)
|
||||
- obelix + B200 (eNB), nepes + B200 (gNB), idefix + Quectel, porcepix w/ ltebox
|
||||
- Note: like [RAN-NSA-B200-Module-LTEBOX-Container](https://jenkins-oai.eurecom.fr/job/RAN-NSA-B200-Module-LTEBOX-Container/) above, but compiled/run from source
|
||||
- [RAN-NSA-2x2-Module-OAIEPC](https://jenkins-oai.eurecom.fr/job/RAN-NSA-2x2-Module-OAIEPC/)
|
||||
- obelix + N310 (eNB), asterix + N310 (gNB), nrmodule2 + Quectel, porcepix w/ Magma EPC
|
||||
- LTE 2x2 and NR 2x2 (non-standalone)
|
||||
- [RAN-SA-Module-CN5G](https://jenkins-oai.eurecom.fr/view/RAN/job/RAN-SA-Module-CN5G/)
|
||||
- asterix + N310 (gNB), nrmodule2 + Quectel, porcepix w/ OAI 5GC
|
||||
- NR 2x2 (standalone)
|
||||
- [RAN-SA-OAIUE-N310-X300-CN5G](https://jenkins-oai.eurecom.fr/job/RAN-SA-OAIUE-N310-X300-CN5G/)
|
||||
- asterix + N310 (gNB), obelix + N310 or X300 (5G UE), porcepix w/ OAI 5GC
|
||||
- OTA test with OAIUE using both N310 and X300
|
||||
- [RAN-SA-AmariS-CN5G](https://jenkins-oai.eurecom.fr/view/RAN/job/RAN-SA-AmariS-CN5G/)
|
||||
- asterix + N310, amariue (1x UE), porcepix w/ OAI 5GC
|
||||
- Amarisoft UE simulator: expected to be increased to more UEs
|
||||
|
||||
### [RAN-CI-develop](https://open5glab.eurecom.fr:8083/jenkins/job/RAN-CI-develop/)
|
||||
|
||||
## Next Bench for CI
|
||||
**Purpose**: automatically triggered tests, mostly 4G, to be phased out and
|
||||
integrated into RAN-Container-Parent
|
||||
|
||||
**Note** : The current test running on Caracal could run on this bench with a N300/N300 setup
|
||||
runs tests:
|
||||
- bellatrix: runs 4G/5G simulators directly (eNB + 1x UE + (opt.) OAI EPC, gNB + 1x UE in "noS1")
|
||||
|
||||
|
||||
|
||||
## Indoor Live Network Bench
|
||||
|
||||
|
||||
|
||||
## Outdoor Live Network Bench
|
||||
|
||||
|
||||
triggers pipelines:
|
||||
- [eNB-CI-F1-FDD-Band7-B210](https://open5glab.eurecom.fr:8083/jenkins/job/eNB-CI-F1-FDD-Band7-B210/)
|
||||
- hutch + B210, nano w/ ltebox + 2x UE
|
||||
- tests 4G FDD with F1 split, 5MHz, 10MHz, 20MHz. 5MHz stable, rest known to
|
||||
be unstable
|
||||
- [eNB-CI-FDD-Band7-B210](https://open5glab.eurecom.fr:8083/jenkins/job/eNB-CI-FDD-Band7-B210/)
|
||||
- hutch + B210, nano w/ ltebox + 2x UE
|
||||
- tests T tracer, information through FlexRAN, RRC inactivity timers,
|
||||
inactivity timers + FlexRAN, different bandwidths
|
||||
- [eNB-CI-IF4p5-FDD-Band7-B210](https://open5glab.eurecom.fr:8083/jenkins/job/eNB-CI-IF4p5-FDD-Band7-B210/)
|
||||
- hutch + B210, nano w/ ltebox + 2x UE
|
||||
- tests IF4.5 split over bandwidths 5, 10, 20 MHz in Band 7
|
||||
- [eNB-CI-IF4p5-TDD-Band40-B210](https://open5glab.eurecom.fr:8083/jenkins/job/eNB-CI-IF4p5-TDD-Band40-B210/)
|
||||
- starsky + B210, nano w/ ltebox + 2x UE
|
||||
- tests IF4.5 split over bandwidths 5, 10, 20 MHz in Band 40
|
||||
- [eNB-CI-TDD-Band40-B210](https://open5glab.eurecom.fr:8083/jenkins/job/eNB-CI-TDD-Band40-B210/)
|
||||
- starsky + B210, nano w/ ltebox + 2x UE
|
||||
- T tracer, TM1 over bandwidths 5, 10, 20 MHz in Band 40, default scheduler
|
||||
for 20 MHz
|
||||
- [eNB-UE-CI-MONO-FDD-Band7-B200](https://open5glab.eurecom.fr:8083/jenkins/job/eNB-UE-CI-MONO-FDD-Band7-B200/)
|
||||
- hutch + B210 (eNB), carabe + B210 (4G UE), nano w/ ltebox
|
||||
- tests OAI 4G for 5 MHz/TM1 with both CN and in noS1 model, MBMS; known to
|
||||
be unstable
|
||||
- [UE-CI-FDD-Band20-B200](https://open5glab.eurecom.fr:8083/jenkins/job/UE-CI-FDD-Band20-B200/)
|
||||
- starsky + B210 (sniffer)
|
||||
- Sniff MIB + SIB1 of Orange, SFR
|
||||
|
||||
@@ -50,7 +50,7 @@ At the moment of writing this document interoperability with the following COTS
|
||||
## 1.1 gNB build and configuration
|
||||
To get the code and build the gNB executable:
|
||||
|
||||
### Ubuntu 18.04
|
||||
### Build gNB
|
||||
```bash
|
||||
git clone https://gitlab.eurecom.fr/oai/openairinterface5g.git
|
||||
git checkout develop
|
||||
@@ -61,42 +61,6 @@ To get the code and build the gNB executable:
|
||||
./build_oai --gNB -w USRP
|
||||
```
|
||||
|
||||
### Ubuntu 20.04
|
||||
```bash
|
||||
# Build UHD from source
|
||||
# https://files.ettus.com/manual/page_build_guide.html
|
||||
sudo apt-get install libboost-all-dev libusb-1.0-0-dev doxygen python3-docutils python3-mako python3-numpy python3-requests python3-ruamel.yaml python3-setuptools cmake build-essential
|
||||
|
||||
git clone https://github.com/EttusResearch/uhd.git
|
||||
cd uhd/host
|
||||
mkdir build
|
||||
cd build
|
||||
cmake ../
|
||||
make -j 4
|
||||
make test # This step is optional
|
||||
sudo make install
|
||||
sudo ldconfig
|
||||
sudo uhd_images_downloader
|
||||
|
||||
|
||||
git clone https://gitlab.eurecom.fr/oai/openairinterface5g.git
|
||||
git checkout develop
|
||||
|
||||
# Install dependencies in Ubuntu 20.04
|
||||
cd
|
||||
cd openairinterface5g/
|
||||
source oaienv
|
||||
cd cmake_targets/
|
||||
./install_external_packages.ubuntu20
|
||||
|
||||
# Build OAI gNB
|
||||
cd
|
||||
cd openairinterface5g/
|
||||
source oaienv
|
||||
cd cmake_targets/
|
||||
./build_oai --gNB -w USRP
|
||||
```
|
||||
|
||||
A reference configuration file for the **monolithic** gNB is provided [here](https://gitlab.eurecom.fr/oai/openairinterface5g/-/blob/develop/targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.106PRB.usrpb210.conf).
|
||||
|
||||
|
||||
|
||||
@@ -0,0 +1,31 @@
|
||||
# how to build phy sim
|
||||
cd cmake_targets/
|
||||
sudo ./build_oai --phy_simulators -c
|
||||
|
||||
cd phy_simulators/build/
|
||||
# ULSCH sim
|
||||
# bit level validation
|
||||
# PUSCH encoding and decoding for 4 layers 2 CMD without data
|
||||
sudo ./nr_ulschsim -R 106 -m9 -s13 -n100 -y4 -z4 -W4
|
||||
|
||||
# UL sim
|
||||
# Uplink chain validation
|
||||
# PUSCH on UE side and gNB side,whole chain for PUSCH
|
||||
# No channel model on data domain signal
|
||||
# No cross-path connection
|
||||
# PMI = 0 is only unitary prcoding matrix
|
||||
sudo ./nr_ulsim -n100 -m9 -r106 -s13 -W4 -y4 -z4
|
||||
|
||||
# How to build rfsim
|
||||
sudo ./build_oai -c --gNB --nrUE -w SIMU
|
||||
|
||||
# How to run with rfsim
|
||||
# 4x4 RANK 4
|
||||
sudo ./nr-softmodem -O ../../../targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.106PRB.usrpb210.4layer.conf --rfsim --phy-test --l 2 --L 4
|
||||
sudo ./nr-uesoftmodem --rfsim --phy-test --ue-nb-ant-rx 4 --ue-nb-ant-tx 4
|
||||
# 4x4 RANK 2
|
||||
sudo ./nr-softmodem -O ../../../targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.106PRB.usrpb210.4layer.conf --rfsim --phy-test --l 2 --L 2
|
||||
sudo ./nr-uesoftmodem --rfsim --phy-test --ue-nb-ant-rx 4 --ue-nb-ant-tx 4
|
||||
|
||||
|
||||
|
||||
Binary file not shown.
|
After Width: | Height: | Size: 18 KiB |
Binary file not shown.
Binary file not shown.
|
After Width: | Height: | Size: 90 KiB |
@@ -0,0 +1,59 @@
|
||||
\documentclass{standalone}
|
||||
|
||||
\usepackage{tikz}
|
||||
\usetikzlibrary{backgrounds, positioning, shapes.symbols}
|
||||
\usepackage{helvet}
|
||||
\renewcommand*{\rmdefault}{\sfdefault}
|
||||
|
||||
\begin{document}
|
||||
\begin{tikzpicture}
|
||||
[
|
||||
font=\footnotesize,
|
||||
faraday/.style={minimum size=3cm, draw, dashed},
|
||||
duplexer/.style={draw,fill=white},
|
||||
]
|
||||
|
||||
\node[faraday, label={[anchor=south west]above left:Faraday cage}] (faraday) {};
|
||||
|
||||
\node[above left=0cm and 2.8cm of faraday, label=above:hutch] (hutch)
|
||||
{\includegraphics[width=1.2cm]{server}};
|
||||
\node[right=0.3cm of hutch, label=above:B210] (b210h)
|
||||
{\includegraphics[width=1.2cm]{b210}} edge (hutch);
|
||||
\node[below left=0.35cm of faraday.north east] (anto)
|
||||
{\includegraphics[width=0.3cm]{antenna}};
|
||||
\draw (b210h) -| node [pos=0.25, duplexer] {B7} (anto);
|
||||
|
||||
\node[below left=0cm and 2.8cm of faraday, label=above:starsky] (starsky)
|
||||
{\includegraphics[width=1.2cm]{server}};
|
||||
\node[right=0.3cm of starsky, label=above:B210] (b210s)
|
||||
{\includegraphics[width=1.2cm]{b210}} edge (starsky);
|
||||
\draw (hutch) -- (b210h);
|
||||
\node[above left=0.35cm of faraday.south east] (antn)
|
||||
{\includegraphics[width=0.3cm]{antenna}};
|
||||
\draw (b210s) -| node [pos=0.35, duplexer] {B40} (antn);
|
||||
\node[below right=-0.2cm and 0.8cm of b210s] (antn2)
|
||||
{\includegraphics[width=0.3cm]{antenna}};
|
||||
\draw (b210s) -| (antn2);
|
||||
|
||||
\node[left=5cm of faraday, label=above:nano] (nano)
|
||||
{\includegraphics[width=1.2cm]{server}};
|
||||
\draw (hutch) -- (nano);
|
||||
\draw (starsky) -- (nano);
|
||||
\node[above right=0.0cm and 0.35cm of faraday.west] (phone1)
|
||||
{\includegraphics[height=0.5cm]{phone}};
|
||||
\node[below right=0.0cm and 0.35cm of faraday.west] (phone2)
|
||||
{\includegraphics[height=0.5cm]{phone}};
|
||||
\draw (nano) -- node[above] {USB/adb} +(5cm,0) |- (phone1);
|
||||
\draw (nano) -- +(5cm,0) |- (phone2);
|
||||
|
||||
\node[right=1.5cm of faraday, label=above:B210] (b210c)
|
||||
{\includegraphics[width=1.2cm]{b210}};
|
||||
\node[left=.5cm of faraday.east] (antc)
|
||||
{\includegraphics[width=0.3cm]{antenna}};
|
||||
\draw (b210c) -- node [pos=0.35, duplexer] {B7UE} (antc);
|
||||
\node[right=0.7cm of b210c, label=above:carabe] (carabe)
|
||||
{\includegraphics[width=1.2cm]{server}}
|
||||
edge (b210c);
|
||||
|
||||
\end{tikzpicture}
|
||||
\end{document}
|
||||
Binary file not shown.
Binary file not shown.
|
After Width: | Height: | Size: 87 KiB |
@@ -0,0 +1,55 @@
|
||||
\documentclass{standalone}
|
||||
|
||||
\usepackage{tikz}
|
||||
\usetikzlibrary{backgrounds, positioning, shapes.symbols}
|
||||
\usepackage{helvet}
|
||||
\renewcommand*{\rmdefault}{\sfdefault}
|
||||
|
||||
\begin{document}
|
||||
\begin{tikzpicture}
|
||||
[
|
||||
font=\footnotesize,
|
||||
faraday/.style={minimum size=3cm, draw, dashed},
|
||||
duplexer/.style={draw,fill=white},
|
||||
]
|
||||
|
||||
\node[faraday, label={[anchor=south east]above right:Faraday cage}] (faraday) {};
|
||||
|
||||
\node[above left=0cm and 2.8cm of faraday, label=above:obelix] (obelix)
|
||||
{\includegraphics[width=1.2cm]{server}};
|
||||
\node[right=0.3cm of obelix, label=above:B200-mini] (b210o)
|
||||
{\includegraphics[width=1.2cm]{b200-mini}} edge (obelix);
|
||||
\node[below right=0.35cm of faraday.north west] (anto)
|
||||
{\includegraphics[width=0.3cm]{antenna}};
|
||||
\draw (b210o) -| node [pos=0.2, duplexer] {B7} (anto);
|
||||
|
||||
\node[below left=0cm and 2.8cm of faraday, label=above:nepes] (nepes)
|
||||
{\includegraphics[width=1.2cm]{server}};
|
||||
\node[right=0.3cm of nepes, label=above:B200-mini] (b210n)
|
||||
{\includegraphics[width=1.2cm]{b200-mini}} edge (nepes);
|
||||
\draw (obelix) -- (b210o);
|
||||
\node[above right=0.35cm of faraday.south west] (antn)
|
||||
{\includegraphics[width=0.3cm]{antenna}};
|
||||
\draw (b210n) -| node [pos=0.2, duplexer] {B78} (antn);
|
||||
|
||||
\node[left=5cm of faraday, label=above:porcepix] (porcepix)
|
||||
{\includegraphics[width=1.2cm]{server}};
|
||||
\draw (obelix) -- (porcepix);
|
||||
\draw (nepes) -- (porcepix);
|
||||
|
||||
\node[right=1.5cm of faraday, label=above:RM500Q-GL] (quectel)
|
||||
{\includegraphics[height=1.2cm]{quectel}};
|
||||
\node[above left=-0.1cm and 0.2cm of faraday.east] (aq2)
|
||||
{\includegraphics[width=0.3cm]{antenna}} edge (quectel);
|
||||
\node[above=-0.2cm of aq2] (aq1)
|
||||
{\includegraphics[width=0.3cm]{antenna}} edge (quectel);
|
||||
\node[below=-0.2cm of aq2] (aq3)
|
||||
{\includegraphics[width=0.3cm]{antenna}} edge (quectel);
|
||||
\node[below=-0.2cm of aq3]
|
||||
{\includegraphics[width=0.3cm]{antenna}} edge (quectel);
|
||||
\node[right=1cm of quectel, label=above:idefix] (idefix)
|
||||
{\includegraphics[width=1.2cm]{server}}
|
||||
edge (quectel);
|
||||
|
||||
\end{tikzpicture}
|
||||
\end{document}
|
||||
Binary file not shown.
Binary file not shown.
|
After Width: | Height: | Size: 88 KiB |
@@ -0,0 +1,63 @@
|
||||
\documentclass{standalone}
|
||||
|
||||
\usepackage{tikz}
|
||||
\usetikzlibrary{backgrounds, positioning, shapes.symbols}
|
||||
\usepackage{helvet}
|
||||
\renewcommand*{\rmdefault}{\sfdefault}
|
||||
|
||||
\begin{document}
|
||||
\begin{tikzpicture}
|
||||
[
|
||||
font=\footnotesize,
|
||||
faraday/.style={minimum size=3cm, draw, dashed},
|
||||
duplexer/.style={draw,fill=white},
|
||||
]
|
||||
|
||||
\node[label=above:porcepix] (porcepix)
|
||||
{\includegraphics[width=1.2cm]{server}};
|
||||
|
||||
\node[above right=1cm and 2cm of porcepix, label=above:asterix] (asterix)
|
||||
{\includegraphics[width=1.2cm]{server}}
|
||||
edge (porcepix);
|
||||
\node[right=0.3cm of asterix, label=above:N310] (n310a)
|
||||
{\includegraphics[width=1.5cm]{n310}} edge (asterix);
|
||||
\node[right=.2cm of n310a, duplexer] (b78o) {B78} edge (n310a);
|
||||
\node[below right=-0.1cm and 0.35cm of b78o.east] (anto1)
|
||||
{\includegraphics[width=0.3cm]{antenna}} edge (b78o);
|
||||
\node[above right=-0.1cm and 0.35cm of b78o.east] (anto2)
|
||||
{\includegraphics[width=0.3cm]{antenna}} edge (b78o);
|
||||
|
||||
\node[right=2cm of porcepix, label=above:obelix] (obelix)
|
||||
{\includegraphics[width=1.2cm]{server}}
|
||||
edge (porcepix);
|
||||
\node[above right=-0.5cm and 0.3cm of obelix, label=above:N310] (n310o)
|
||||
{\includegraphics[width=1.5cm]{n310}} edge (obelix);
|
||||
\node[right=.2cm of n310o, duplexer] (b78o) {B40} edge (n310o);
|
||||
\node[below right=-0.1cm and 0.35cm of b78o.east] (anto1)
|
||||
{\includegraphics[width=0.3cm]{antenna}} edge (b78o);
|
||||
\node[above right=-0.1cm and 0.35cm of b78o.east] (anto2)
|
||||
{\includegraphics[width=0.3cm]{antenna}} edge (b78o);
|
||||
\node[below right=-0.5cm and 0.3cm of obelix, label=above:X310] (x310o)
|
||||
{\includegraphics[width=1.5cm]{x310}} edge (obelix);
|
||||
\node[right=.2cm of x310o, duplexer] (b78o) {B78} edge (x310o);
|
||||
\node[below right=-0.1cm and 0.35cm of b78o.east] (anto1)
|
||||
{\includegraphics[width=0.3cm]{antenna}} edge (b78o);
|
||||
\node[above right=-0.1cm and 0.35cm of b78o.east] (anto2)
|
||||
{\includegraphics[width=0.3cm]{antenna}} edge (b78o);
|
||||
|
||||
\node[right=5.0cm of n310o, label=above:RM500Q-GL] (quectel)
|
||||
{\includegraphics[height=1.2cm]{quectel}};
|
||||
\node[above left=-0.1cm and 0.8cm of quectel.west] (aq2)
|
||||
{\includegraphics[width=0.3cm]{antenna}} edge (quectel);
|
||||
\node[above=-0.2cm of aq2] (aq1)
|
||||
{\includegraphics[width=0.3cm]{antenna}} edge (quectel);
|
||||
\node[below=-0.2cm of aq2] (aq3)
|
||||
{\includegraphics[width=0.3cm]{antenna}} edge (quectel);
|
||||
\node[below=-0.2cm of aq3]
|
||||
{\includegraphics[width=0.3cm]{antenna}} edge (quectel);
|
||||
\node[right=1cm of quectel, label=above:nrmodule2] (nrmodule2)
|
||||
{\includegraphics[width=1.2cm]{server}}
|
||||
edge (quectel);
|
||||
|
||||
\end{tikzpicture}
|
||||
\end{document}
|
||||
Binary file not shown.
Binary file not shown.
|
After Width: | Height: | Size: 233 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 32 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 248 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 105 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 119 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 118 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 154 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 181 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 164 KiB |
Binary file not shown.
Binary file not shown.
|
After Width: | Height: | Size: 86 KiB |
Binary file not shown.
Binary file not shown.
|
After Width: | Height: | Size: 11 KiB |
Reference in New Issue
Block a user