diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index c75f8fa464..8947453454 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -8,6 +8,7 @@ job1:
- echo $EXTERNAL_SHARE_DIR
- echo $SHELL
- git rev-parse --abbrev-ref HEAD
+ - git_repo=`git config --get remote.origin.url`
- git_head=`git rev-parse HEAD`
- echo $git_head
- tmp=`git show-ref --head | grep $git_head`
@@ -23,8 +24,8 @@ job1:
- echo $NRUNS_LTE_SOFTMODEM
- echo $TIMEOUT_CMD
- mkdir -p $OPENAIR_DIR/cmake_targets/autotests/log
- - python $OPENAIR_DIR/cmake_targets/autotests/run_exec_lte-softmodem_tests.py -c -5GRepoHeadVersion $git_head -n $NFS_SHARE_DIR -u $OAI_USER -p $OAI_PASS $OAI_EXTRA_ARGS -g "$OAI_TEST_CASE_GROUP">& $OPENAIR_DIR/cmake_targets/autotests/python_autotest_cleanup.log
- - python $OPENAIR_DIR/cmake_targets/autotests/run_exec_lte-softmodem_tests.py -r -5GRepoHeadVersion $git_head -n $NFS_SHARE_DIR -u $OAI_USER -p $OAI_PASS `echo $OAI_EXTRA_ARGS` -g "$OAI_TEST_CASE_GROUP" --nrun_lte_softmodem $NRUNS_LTE_SOFTMODEM --timeout_cmd $TIMEOUT_CMD >& $OPENAIR_DIR/cmake_targets/autotests/python_autotest.log
+ - python $OPENAIR_DIR/cmake_targets/autotests/run_exec_lte-softmodem_tests.py -c -5GRepo $git_repo -5GRepoHeadVersion $git_head -n $NFS_SHARE_DIR -u $OAI_USER -p $OAI_PASS $OAI_EXTRA_ARGS -g "$OAI_TEST_CASE_GROUP">& $OPENAIR_DIR/cmake_targets/autotests/python_autotest_cleanup.log
+ - python $OPENAIR_DIR/cmake_targets/autotests/run_exec_lte-softmodem_tests.py -r -5GRepo $git_repo -5GRepoHeadVersion $git_head -n $NFS_SHARE_DIR -u $OAI_USER -p $OAI_PASS `echo $OAI_EXTRA_ARGS` -g "$OAI_TEST_CASE_GROUP" --nrun_lte_softmodem $NRUNS_LTE_SOFTMODEM --timeout_cmd $TIMEOUT_CMD >& $OPENAIR_DIR/cmake_targets/autotests/python_autotest.log
- mv $OPENAIR_DIR/cmake_targets/autotests/python_autotest.log $OPENAIR_DIR/cmake_targets/autotests/log/python_autotest.log
- mv $OPENAIR_DIR/cmake_targets/autotests/python_autotest_cleanup.log $OPENAIR_DIR/cmake_targets/autotests/log/python_autotest_cleanup.log
- sshpass -p "$OAI_PASS" rsync -az -e "ssh -o StrictHostKeyChecking=no " --rsync-path="mkdir -p $NFS_TEST_RESULTS_DIR && rsync" $OPENAIR_DIR/cmake_targets/autotests/log $OAI_USER@localhost:$NFS_TEST_RESULTS_DIR
diff --git a/cmake_targets/CMakeLists.txt b/cmake_targets/CMakeLists.txt
index 7477ef819f..51d779fa59 100644
--- a/cmake_targets/CMakeLists.txt
+++ b/cmake_targets/CMakeLists.txt
@@ -132,16 +132,19 @@ Message("Architecture is ${CMAKE_SYSTEM_PROCESSOR}")
if (CMAKE_SYSTEM_PROCESSOR STREQUAL "armv7l")
set(C_FLAGS_PROCESSOR "-gdwarf-2 -mfloat-abi=hard -mfpu=neon -lgcc -lrt")
else (CMAKE_SYSTEM_PROCESSOR STREQUAL "armv7l")
- file(STRINGS "/proc/cpuinfo" CPUINFO REGEX flags LIMIT_COUNT 1)
- #Message("CPUINFO is ${CPUINFO}")
- if (CPUINFO MATCHES "avx2")
- set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -mavx2")
- endif()
- if (CPUINFO MATCHES "sse4_1")
- set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -msse4.1")
- endif()
- if (CPUINFO MATCHES "ssse3")
- set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -mssse3")
+ if(EXISTS "/proc/cpuinfo")
+ file(STRINGS "/proc/cpuinfo" CPUINFO REGEX flags LIMIT_COUNT 1)
+ if (CPUINFO MATCHES "avx2")
+ set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -mavx2")
+ endif()
+ if (CPUINFO MATCHES "sse4_1")
+ set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -msse4.1")
+ endif()
+ if (CPUINFO MATCHES "ssse3")
+ set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -mssse3")
+ endif()
+ else()
+ Message("/proc/cpuinfo does not exit. We will use manual CPU flags")
endif()
endif()
@@ -151,7 +154,7 @@ Message("C_FLAGS_PROCESSOR is ${C_FLAGS_PROCESSOR}")
if (CMAKE_SYSTEM_PROCESSOR MATCHES "x86")
if ( (NOT( C_FLAGS_PROCESSOR MATCHES "ssse3")) OR (NOT( C_FLAGS_PROCESSOR MATCHES "msse4.1")) )
- Message(FATAL_ERROR "For x86 Architecture, you must have following flags: -mssse3 -msse4.1. The current detected flags are: ${C_FLAGS_PROCESSOR}. You can pass the flags manually in build script, for example: ./build_oai --cflags_processor \"-mssse3 -msse4.1\" ")
+ Message(FATAL_ERROR "For x86 Architecture, you must have following flags: -mssse3 -msse4.1. The current detected flags are: ${C_FLAGS_PROCESSOR}. You can pass the flags manually in build script, for example: ./build_oai --cflags_processor \"-mssse3 -msse4.1 -mavx2\" ")
endif()
endif()
@@ -176,42 +179,65 @@ add_definitions(-DCMAKER)
set(CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS} -g -DMALLOC_CHECK_=3")
set(CMAKE_C_FLAGS_RELWITHDEBINFO "${CMAKE_C_FLAGS} -g -DMALLOC_CHECK_=3 -O2")
-Message("RF_BOARD is ${RF_BOARD}")
-# Below has been put in comment because does not work with
-# SVN authentication.
-#
-#find_package(Subversion)
-#if(SUBVERSION_FOUND)
-# Subversion_WC_INFO(${OPENAIR_DIR} openair)
-# set (FIRMWARE_VERSION "${openair_WC_REVISION} - ${openair_WC_LAST_CHANGED_DATE}")
-# Subversion_WC_LOG(${OPENAIR_DIR} Project)
-#else()
-# set (FIRMWARE_VERSION "No svn information")
-#endif()
-#add_definitions("-DFIRMWARE_VERSION=\"${FIRMWARE_VERSION}\"")
+
+set(GIT_BRANCH "UNKNOWN")
+set(GIT_COMMIT_HASH "UNKNOWN")
+set(GIT_COMMIT_DATE "UNKNOWN")
+
+
+find_package(Git)
+if(GIT_FOUND)
+ message("git found: ${GIT_EXECUTABLE}")
+ # Get the current working branch
+ execute_process(
+ COMMAND git rev-parse --abbrev-ref HEAD
+ WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
+ OUTPUT_VARIABLE GIT_BRANCH
+ OUTPUT_STRIP_TRAILING_WHITESPACE
+ )
+
+ # Get the latest abbreviated commit hash of the working branch
+ execute_process(
+ COMMAND git log -1 --format=%h
+ WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
+ OUTPUT_VARIABLE GIT_COMMIT_HASH
+ OUTPUT_STRIP_TRAILING_WHITESPACE
+ )
+
+ # Get the latest commit date of the working branch
+ execute_process(
+ COMMAND git log -1 --format=%cd
+ WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
+ OUTPUT_VARIABLE GIT_COMMIT_DATE
+ OUTPUT_STRIP_TRAILING_WHITESPACE
+ )
+endif()
+
# Below is a hard-coded info
set (FIRMWARE_VERSION "No svn information")
add_definitions("-DFIRMWARE_VERSION=\"${FIRMWARE_VERSION}\"")
-add_definitions("-DPACKAGE_VERSION=\"${FIRMWARE_VERSION}\"")
-add_definitions("-DPACKAGE_BUGREPORT=\"OpenAirInterface web site\"")
+add_definitions("-DPACKAGE_VERSION=\"Branch: ${GIT_BRANCH} Abrev. Hash: ${GIT_COMMIT_HASH} Date: ${GIT_COMMIT_DATE}\"")
+add_definitions("-DPACKAGE_BUGREPORT=\"openair4g-devel@lists.eurecom.fr\"")
# Debug related options
#########################################
-add_boolean_option(MSG_PRINT False "print debug messages")
-add_boolean_option(DISABLE_XER_PRINT False "print XER Format")
-add_boolean_option(XER_PRINT False "print XER Format")
-add_boolean_option(RRC_MSG_PRINT False "print RRC messages")
-add_boolean_option(PDCP_MSG_PRINT False "print PDCP messages to /tmp/pdcp.log")
-add_boolean_option(DEBUG_PDCP_PAYLOAD False "print PDCP PDU to stdout") # if true, make sure that global and PDCP log levels are trace
+add_boolean_option(ASN_DEBUG False "ASN1 coder/decoder Debug")
+add_boolean_option(EMIT_ASN_DEBUG False "ASN1 coder/decoder Debug")
+add_boolean_option(MSG_PRINT False "print debug messages")
+add_boolean_option(DISABLE_XER_PRINT False "print XER Format")
+add_boolean_option(XER_PRINT False "print XER Format")
+add_boolean_option(RRC_MSG_PRINT False "print RRC messages")
+add_boolean_option(PDCP_MSG_PRINT False "print PDCP messages to /tmp/pdcp.log")
+add_boolean_option(DEBUG_PDCP_PAYLOAD False "print PDCP PDU to stdout") # if true, make sure that global and PDCP log levels are trace
add_boolean_option(DEBUG_MAC_INTERFACE False "print MAC-RLC PDU exchange to stdout") # if true, make sure that global and PDCP log levels are trace
-add_boolean_option(TRACE_RLC_PAYLOAD False "print RLC PDU to stdout") # if true, make sure that global and PDCP log levels are trace
-add_boolean_option(TEST_OMG False "???")
-add_boolean_option(DEBUG_OMG False "???")
-add_boolean_option(XFORMS False "This adds the possibility to see the signal oscilloscope")
-add_boolean_option(PRINT_STATS False "This adds the possibility to see the status")
+add_boolean_option(TRACE_RLC_PAYLOAD False "print RLC PDU to stdout") # if true, make sure that global and PDCP log levels are trace
+add_boolean_option(TEST_OMG False "???")
+add_boolean_option(DEBUG_OMG False "???")
+add_boolean_option(XFORMS False "This adds the possibility to see the signal oscilloscope")
+add_boolean_option(PRINT_STATS False "This adds the possibility to see the status")
add_boolean_option(DEBUG_CONSOLE False "makes debugging easier, disables stdout/stderr buffering")
@@ -252,6 +278,7 @@ endif (${RTAI})
# New C code source file, cmake must be re-run (instead of re-running make only)
#############
set(asn1c_call "${OPENAIR_CMAKE}/tools/generate_asn1")
+set(fix_asn1c_call "${OPENAIR_CMAKE}/tools/fix_asn1")
set(asn1_generated_dir ${OPENAIR_BIN_DIR})
set(protoc_call "${OPENAIR_CMAKE}/tools/generate_protobuf")
@@ -273,7 +300,19 @@ set (RRC_FULL_DIR ${asn1_generated_dir}/${RRC_ASN1_VERSION})
if(NOT EXISTS ${asn1c_call})
message( FATAL_ERROR "The script ${asn1c_call} must be present" )
endif(NOT EXISTS ${asn1c_call})
-execute_process(COMMAND ${asn1c_call} ${RRC_FULL_DIR} ${RRC_GRAMMAR})
+execute_process(COMMAND ${asn1c_call} ${RRC_FULL_DIR} ${RRC_GRAMMAR}
+ RESULT_VARIABLE ret)
+if (NOT ${ret} STREQUAL 0)
+ message(FATAL_ERROR "${asn1c_call}: error")
+endif (NOT ${ret} STREQUAL 0)
+if(NOT EXISTS ${fix_asn1c_call})
+ message( FATAL_ERROR "The script ${fix_asn1c_call} must be present" )
+endif(NOT EXISTS ${fix_asn1c_call})
+execute_process(COMMAND ${fix_asn1c_call} ${RRC_FULL_DIR} RRC ${RRC_ASN1_VERSION}
+ RESULT_VARIABLE ret)
+if (NOT ${ret} STREQUAL 0)
+ message(FATAL_ERROR "${fix_asn1c_call}: error")
+endif (NOT ${ret} STREQUAL 0)
file(GLOB rrc_source ${RRC_FULL_DIR}/*.c)
set(rrc_source ${rrc_source} ${OPENAIR2_DIR}/RRC/LITE/MESSAGES/asn1_msg.c)
file(GLOB rrc_h ${RRC_FULL_DIR}/*.h)
@@ -287,6 +326,7 @@ include_directories ("${RRC_FULL_DIR}")
add_custom_command (
OUTPUT ${RRC_FULL_DIR}/asn1_constants.h
COMMAND ${asn1c_call} ${RRC_FULL_DIR} ${RRC_GRAMMAR}
+ COMMAND ${fix_asn1c_call} ${RRC_FULL_DIR} RRC ${RRC_ASN1_VERSION}
DEPENDS ${RRC_GRAMMAR}
)
@@ -315,13 +355,28 @@ set(S1AP_ASN_FILES
)
set(S1AP_C_DIR ${asn1_generated_dir}/${ASN1RELDIR})
#message("calling ${asn1c_call} ${S1AP_C_DIR} ${S1AP_ASN_FILES}")
-execute_process(COMMAND ${asn1c_call} ${S1AP_C_DIR} ${S1AP_ASN_FILES})
+execute_process(COMMAND ${asn1c_call} ${S1AP_C_DIR} ${S1AP_ASN_FILES}
+ RESULT_VARIABLE ret)
+if (NOT ${ret} STREQUAL 0)
+ message(FATAL_ERROR "${asn1c_call}: error")
+endif (NOT ${ret} STREQUAL 0)
+execute_process(COMMAND python ${S1AP_DIR}/MESSAGES/ASN1/asn1tostruct.py -f${S1AP_ASN_DIR}/S1AP-PDU-Contents.asn -o${S1AP_C_DIR}
+ RESULT_VARIABLE ret)
+if (NOT ${ret} STREQUAL 0)
+ message(FATAL_ERROR "asn1tostruct.py: error")
+endif (NOT ${ret} STREQUAL 0)
+execute_process(COMMAND ${fix_asn1c_call} ${S1AP_C_DIR} S1AP ${S1AP_VERSION}
+ RESULT_VARIABLE ret)
+if (NOT ${ret} STREQUAL 0)
+ message(FATAL_ERROR "${fix_asn1c_call}: error")
+endif (NOT ${ret} STREQUAL 0)
file(GLOB S1AP_source ${S1AP_C_DIR}/*.c)
set(S1AP_OAI_generated
${S1AP_C_DIR}/s1ap_decoder.c
${S1AP_C_DIR}/s1ap_encoder.c
${S1AP_C_DIR}/s1ap_xer_print.c
+ ${S1AP_C_DIR}/s1ap_compare.c
${S1AP_C_DIR}/s1ap_ies_defs.h
)
file(GLOB s1ap_h ${S1AP_C_DIR}/*.h)
@@ -331,6 +386,7 @@ add_custom_command (
OUTPUT ${S1AP_OAI_generated}
COMMAND ${asn1c_call} ${S1AP_C_DIR} ${S1AP_ASN_FILES}
COMMAND python ${S1AP_DIR}/MESSAGES/ASN1/asn1tostruct.py -f${S1AP_ASN_DIR}/S1AP-PDU-Contents.asn -o${S1AP_C_DIR}
+ COMMAND ${fix_asn1c_call} ${S1AP_C_DIR} S1AP ${S1AP_VERSION}
DEPENDS ${S1AP_ASN_FILES}
)
add_library(S1AP_LIB
@@ -382,7 +438,21 @@ set(X2AP_ASN_FILES
set(X2AP_C_DIR ${asn1_generated_dir}/${ASN1RELDIR})
#message("calling ${asn1c_call} ${X2AP_C_DIR} ${X2AP_ASN_FILES}")
-execute_process(COMMAND ${asn1c_call} ${X2AP_C_DIR} ${X2AP_ASN_FILES})
+execute_process(COMMAND ${asn1c_call} ${X2AP_C_DIR} ${X2AP_ASN_FILES}
+ RESULT_VARIABLE ret)
+if (NOT ${ret} STREQUAL 0)
+ message(FATAL_ERROR "${asn1c_call}: error")
+endif (NOT ${ret} STREQUAL 0)
+execute_process(COMMAND python ${X2AP_DIR}/MESSAGES/ASN1/asn1tostruct.py -f ${X2AP_ASN_DIR}/X2AP-PDU-Contents.asn -o ${X2AP_C_DIR}
+ RESULT_VARIABLE ret)
+if (NOT ${ret} STREQUAL 0)
+ message(FATAL_ERROR "asn1tostruct.py: error")
+endif (NOT ${ret} STREQUAL 0)
+execute_process(COMMAND ${fix_asn1c_call} ${X2AP_C_DIR} X2AP ${X2AP_VERSION}
+ RESULT_VARIABLE ret)
+if (NOT ${ret} STREQUAL 0)
+ message(FATAL_ERROR "${fix_asn1c_call}: error")
+endif (NOT ${ret} STREQUAL 0)
file(GLOB X2AP_source ${X2AP_C_DIR}/*.c)
set(X2AP_OAI_generated
@@ -399,6 +469,7 @@ add_custom_command (
OUTPUT ${X2AP_OAI_generated}
COMMAND ${asn1c_call} ${X2AP_C_DIR} ${X2AP_ASN_FILES}
COMMAND python ${X2AP_DIR}/MESSAGES/ASN1/asn1tostruct.py -f ${X2AP_ASN_DIR}/X2AP-PDU-Contents.asn -o ${X2AP_C_DIR}
+ COMMAND ${fix_asn1c_call} ${X2AP_C_DIR} X2AP ${X2AP_VERSION}
DEPENDS ${X2AP_ASN_FILES}
)
@@ -1086,7 +1157,6 @@ add_library(CN_UTILS
${OPENAIR3_DIR}/UTILS/conversions.c
${OPENAIR3_DIR}/UTILS/enum_string.c
${OPENAIR3_DIR}/UTILS/log.c
- ${OPENAIR3_DIR}/UTILS/mme_config.c
${OPENAIR3_DIR}/UTILS/mcc_mnc_itu.c
)
@@ -1427,6 +1497,9 @@ include(FindPkgConfig)
pkg_search_module(LIBXML2 libxml-2.0 REQUIRED)
include_directories(${LIBXML2_INCLUDE_DIRS})
+pkg_search_module(LIBXSLT libxslt REQUIRED)
+include_directories(${LIBXSLT_INCLUDE_DIRS})
+
pkg_search_module(OPENSSL openssl REQUIRED)
include_directories(${OPENSSL_INCLUDE_DIRS})
@@ -1718,6 +1791,7 @@ endforeach(myExe)
add_executable(test_epc_generate_scenario
${OPENAIR3_DIR}/TEST/EPC_TEST/generate_scenario.c
+ ${OPENAIR3_DIR}/TEST/EPC_TEST/generate_scenario.h
${OPENAIR2_DIR}/ENB_APP/enb_config.h
${OPENAIR2_DIR}/COMMON/commonDef.h
${OPENAIR2_DIR}/COMMON/messages_def.h
@@ -1726,7 +1800,28 @@ add_executable(test_epc_generate_scenario
${OPENAIR_BIN_DIR}/messages_xml.h
)
target_link_libraries (test_epc_generate_scenario
- -Wl,--start-group RRC_LIB S1AP_LIB S1AP_ENB X2AP_LIB GTPV1U LIB_NAS_UE SECU_CN UTIL HASHTABLE SCTP_CLIENT UDP SCHED_LIB PHY LFDS ${MSC_LIB} L2 -Wl,--end-group pthread m rt crypt sctp ${LIBXML2_LIBRARIES} ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} ${CONFIG_LIBRARIES}
+ -Wl,--start-group RRC_LIB S1AP_LIB S1AP_ENB X2AP_LIB GTPV1U LIB_NAS_UE SECU_CN UTIL HASHTABLE SCTP_CLIENT UDP SCHED_LIB PHY LFDS ${ITTI_LIB} ${MSC_LIB} L2 -Wl,--end-group pthread m rt crypt sctp ${LIBXML2_LIBRARIES} ${LIBXSLT_LIBRARIES} ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} ${CONFIG_LIBRARIES}
+ )
+
+add_executable(test_epc_play_scenario
+ ${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario.c
+ ${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario_decode.c
+ ${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario_display.c
+ ${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario_fsm.c
+ ${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario_parse.c
+ ${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario_s1ap.c
+ ${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario_s1ap_compare_ie.c
+ ${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario_s1ap_eNB_defs.h
+ ${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario_sctp.c
+ ${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario.h
+ ${OPENAIR2_DIR}/COMMON/commonDef.h
+ ${OPENAIR2_DIR}/COMMON/messages_def.h
+ ${OPENAIR2_DIR}/COMMON/messages_types.h
+ ${OPENAIR_BIN_DIR}/messages_xml.h
+ )
+target_include_directories(test_epc_play_scenario PUBLIC /usr/local/share/asn1c)
+target_link_libraries (test_epc_play_scenario
+ -Wl,--start-group RRC_LIB S1AP_LIB X2AP_LIB GTPV1U LIB_NAS_UE SECU_CN UTIL HASHTABLE SCTP_CLIENT UDP SCHED_LIB PHY LFDS ${ITTI_LIB} ${MSC_LIB} -Wl,--end-group pthread m rt crypt sctp ${LIBXML2_LIBRARIES} ${LIBXSLT_LIBRARIES} ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} ${CONFIG_LIBRARIES}
)
diff --git a/cmake_targets/autotests/README.txt b/cmake_targets/autotests/README.txt
index 6e9cbbd581..3ae18133c7 100644
--- a/cmake_targets/autotests/README.txt
+++ b/cmake_targets/autotests/README.txt
@@ -205,6 +205,14 @@ Obj.# Case# Test# Description
01 85 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
01 85 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
+02 55 lte-softmodem tests with USRP B210 RF as eNB and ALU EPC w/ Sony Experia M4 COTS UE for TX/1RX
+02 55 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX
+02 55 01 Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX
+02 55 02 Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX
+02 55 03 Band 7 FDD 5MHz DL Throughput for 300 sec for 1TX/1RX
+02 55 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
+02 55 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
+
01 64 lte-softmodem-noS1 tests
diff --git a/cmake_targets/autotests/run_compilation_autotests.bash b/cmake_targets/autotests/run_compilation_autotests.bash
index afe7aa4873..a7b056dc81 100755
--- a/cmake_targets/autotests/run_compilation_autotests.bash
+++ b/cmake_targets/autotests/run_compilation_autotests.bash
@@ -20,7 +20,7 @@ test_compile() {
compile_prog=$2
exec_prog=$3
build_dir=$tdir/$1/build
- log_file=$tdir/log/test.$1.txt
+ log_file=$tdir/log/test.$1.$2.$5.txt
target=$5
echo "Compiling test case $test_name. Log file = $log_file"
rm -fr $build_dir
@@ -34,10 +34,10 @@ test_compile() {
if [ -s $exec_prog ] ; then
cp $exec_prog $tdir/bin/`basename $exec_prog`.$target.$test_name
echo_success "$test_name $exec_prog $target compiled"
- xUnit_success "compilation" $test_name "PASS" 1
+ xUnit_success "compilation" $test_name "PASS" 1 "$results_file"
else
echo_error "$test_name $exec_prog $target compilation failed"
- xUnit_fail "compilation" $test_name "FAIL" 1
+ xUnit_fail "compilation" $test_name "FAIL" 1 "$results_file"
fi
}
diff --git a/cmake_targets/autotests/run_exec_autotests.bash b/cmake_targets/autotests/run_exec_autotests.bash
index a98a071bae..2d3f193b30 100755
--- a/cmake_targets/autotests/run_exec_autotests.bash
+++ b/cmake_targets/autotests/run_exec_autotests.bash
@@ -1,4 +1,34 @@
#!/bin/bash
+#******************************************************************************
+
+# OpenAirInterface
+# Copyright(c) 1999 - 2014 Eurecom
+
+# OpenAirInterface is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+
+# OpenAirInterface is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with OpenAirInterface.The full GNU General Public License is
+# included in this distribution in the file called "COPYING". If not,
+# see .
+
+# Contact Information
+# OpenAirInterface Admin: openair_admin@eurecom.fr
+# OpenAirInterface Tech : openair_tech@eurecom.fr
+# OpenAirInterface Dev : openair4g-devel@lists.eurecom.fr
+
+# Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
+
+# *******************************************************************************/
+# \author Navid Nikaein, Rohit Gupta
if [ -s $OPENAIR_DIR/cmake_targets/tools/build_helper ] ; then
source $OPENAIR_DIR/cmake_targets/tools/build_helper
@@ -111,6 +141,8 @@ function test_compile() {
compile_log_dir=`eval echo \"$OPENAIR_DIR/cmake_targets/log/\"`
echo "Removing compilation log files in $compile_log_dir"
rm -frv $compile_log_dir
+ echo "Executing $pre_exec_file $pre_exe_args ...."
+ eval $pre_exec_file $pre_exec_args
echo "Executing $compile_prog $compile_prog_args ...."
eval $compile_prog $compile_prog_args
echo "Copying compilation log files to test case log directory: $log_dir"
@@ -280,7 +312,7 @@ function test_compile_and_run() {
if [ -n "$pre_exec_file" ]; then
{ echo " Executing $pre_exec_file $pre_exec_args "
- eval " echo '$mypassword' |sudo -S -E $pre_exec_file $pre_exec_args " ; }>> $temp_exec_log 2>&1
+ eval " $pre_exec_file $pre_exec_args " ; }>> $temp_exec_log 2>&1
fi
echo "Executing $main_exec $main_exec_args_array_index "
@@ -388,6 +420,7 @@ until [ -z "$1" ]
-g | --run-group)
RUN_GROUP=1
test_case_group=$2
+ test_case_group=`sed "s/\+/\*/g" <<< "${test_case_group}"` # Replace + with * for bash string substituion
echo_info "Will execute test cases only in group $test_case_group"
shift 2;;
-p)
@@ -423,9 +456,17 @@ rm -fr $tmpfile
xml_conf="$OPENAIR_DIR/cmake_targets/autotests/test_case_list.xml"
test_case_list=`xmlstarlet sel -T -t -m /testCaseList/testCase -s A:N:- "@id" -v "@id" -n $xml_conf`
+test_case_excl_list=`xmlstarlet sel -t -v "/testCaseList/TestCaseExclusionList" $xml_conf`
+echo "Test Case Exclusion List = $test_case_excl_list "
+
+test_case_excl_list=`sed "s/\+/\*/g" <<< "$test_case_excl_list" ` # Replace + with * for bash string substituion
+
+read -a test_case_excl_array <<< "$test_case_excl_list"
echo "test_case_list = $test_case_list"
+echo "Test Case Exclusion List = $test_case_excl_list \n"
+
readarray -t test_case_array <<<"$test_case_list"
read -a test_case_group_array <<< "$test_case_group"
@@ -447,6 +488,15 @@ for search_expr in "${test_case_array[@]}"
flag_run_test_case=1
fi
+ for search_excl in "${test_case_excl_array[@]}"
+ do
+ if [[ $search_expr == $search_excl ]];then
+ flag_run_test_case=0
+ echo_info "Test case $search_expr match found in test case excl group. Will skip the test case for execution..."
+ break
+ fi
+ done
+
#We skip this test case if it is not in the group list
if [ "$flag_run_test_case" -ne "1" ]; then
@@ -485,6 +535,7 @@ for search_expr in "${test_case_array[@]}"
echo "search_expr_false = $search_expr_false"
echo "nruns = $nruns"
+
#eval $pre_exec
compile_prog_out=`eval echo \"$compile_prog_out\"`
diff --git a/cmake_targets/autotests/run_exec_lte-softmodem_tests.py b/cmake_targets/autotests/run_exec_lte-softmodem_tests.py
index 3418798954..f1c165acbf 100755
--- a/cmake_targets/autotests/run_exec_lte-softmodem_tests.py
+++ b/cmake_targets/autotests/run_exec_lte-softmodem_tests.py
@@ -216,7 +216,7 @@ def sftp_module (username, password, hostname, ports, paramList,logfile):
# \brief bash script stub put at the end of scripts to terminate it
# \param timeout_cmd terminate script after timeout_cmd seconds
# \param terminate_missing_procs if True terminate all the processes launched by script if one of them terminates prematurely (due to error)
-def finalize_deploy_script (timeout_cmd, terminate_missing_procs='True'):
+def finalize_deploy_script (timeout_cmd, terminate_missing_procs='False'):
cmd = 'declare -i timeout_cmd='+str(timeout_cmd) + '\n'
if terminate_missing_procs == 'True':
cmd = cmd + """
@@ -1105,6 +1105,7 @@ pw =''
i = 0
dlsim=0
localshell=0
+GitOAI5GRepo=''
GitOAI5GRepoBranch=''
GitOAI5GHeadVersion=''
user=''
@@ -1141,6 +1142,9 @@ while i < len (sys.argv):
i = i +1
elif arg == '-c':
cleanUpRemoteMachines=True
+ elif arg == '-5GRepo':
+ GitOAI5GRepo = sys.argv[i+1]
+ i = i +1
elif arg == '-5GRepoBranch':
GitOAI5GRepoBranch = sys.argv[i+1]
i = i +1
@@ -1190,6 +1194,7 @@ while i < len (sys.argv):
print "-r: Remove the log directory in autotests"
print "-g: Run test cases in a group"
print "-c: Run cleanup scripts on remote machines and exit"
+ print "-5GRepo: Repository for OAI 5G to use to run tests (overrides GitOAI5GRepo in test_case_list.xml)"
print "-5GRepoBranch: Branch for OAI 5G Repository to run tests (overrides the branch in test_case_list.xml)"
print "-5GRepoHeadVersion: Head commit on which to run tests (overrides the branch in test_case_list.xml)"
print "-u: use the user name passed as argument"
@@ -1278,7 +1283,9 @@ if MachineList =='':
MachineList = xmlRoot.findtext('MachineList',default='')
NFSResultsShare = xmlRoot.findtext('NFSResultsShare',default='')
GitOpenaircnRepo = xmlRoot.findtext('GitOpenair-cnRepo',default='')
-GitOAI5GRepo = xmlRoot.findtext('GitOAI5GRepo',default='')
+
+if GitOAI5GRepo == '':
+ GitOAI5GRepo = xmlRoot.findtext('GitOAI5GRepo',default='')
if GitOAI5GRepoBranch == '':
GitOAI5GRepoBranch = xmlRoot.findtext('GitOAI5GRepoBranch',default='')
@@ -1394,15 +1401,15 @@ for oai in oai_list:
#cmd = cmd + 'mkdir -p ' + logdir + '\n'
cmd = cmd + 'cd '+ logdir + '\n'
cmd = cmd + 'git config --global http.sslVerify false \n'
- cmd = cmd + 'git clone --depth 1 '+ GitOAI5GRepo + ' -b ' + GitOAI5GRepoBranch +' \n'
- cmd = cmd + 'git clone '+ GitOpenaircnRepo + ' -b ' +GitOpenaircnRepoBranch + ' \n'
+ cmd = cmd + 'git clone '+ GitOAI5GRepo +' \n'
+ cmd = cmd + 'git clone '+ GitOpenaircnRepo + ' \n'
cmd = cmd + 'cd ' + logdirOAI5GRepo + '\n'
cmd = cmd + 'git checkout ' + GitOAI5GRepoBranch + '\n'
#cmd = cmd + 'git checkout ' + GitOAI5GHeadVersion + '\n'
cmd = cmd + 'git_head=`git ls-remote |grep \'' + GitOAI5GRepoBranch + '\'` \n'
cmd = cmd + 'git_head=($git_head) \n'
cmd = cmd + 'git_head=${git_head[0]} \n'
- cmd = cmd + 'echo \"GitOAI5GHeadVersion_remote = $git_head\"'
+ cmd = cmd + 'echo \"GitOAI5GHeadVersion_remote = $git_head\" \n'
cmd = cmd + 'echo \"GitOAI5GHeadVersion_local = ' + GitOAI5GHeadVersion + '\" \n'
if flag_skip_git_head_check==True:
cmd = cmd + 'echo \"skipping GitHead check...\" \n '
diff --git a/cmake_targets/autotests/test_case_list.xml b/cmake_targets/autotests/test_case_list.xml
index 59e6783c23..eddc83c334 100644
--- a/cmake_targets/autotests/test_case_list.xml
+++ b/cmake_targets/autotests/test_case_list.xml
@@ -1,4 +1,4 @@
-
+
mozart calisson stevens nano amerique
/mnt/sradio/TEST_RESULTS/
@@ -6,11 +6,11 @@
https://gitlab.eurecom.fr/oai/openair-cn.git
develop
develop
- oaisim* oaisim_nos1* lte-softmodem* lte-softmodem-nos1* mme_gw* run_epc* run_hss* hss hss_sim configure_cots_bandrich_ue* wvdial* iperf iperf_script ping tshark rrh_gw
+ oaisim* oaisim_nos1* lte-softmodem* lte-softmodem-nos1* mme_gw* run_epc* run_hss* hss hss_sim configure_cots* wvdial* iperf iperf_script ping tshark rrh_gw
sudo -S -E /opt/ltebox/tools/stop_ltebox
$OPENAIR_DIR/cmake_targets/build_oai -w EXMIMO -c; sudo -S -E $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2; uname -a; dmesg|tail
36000
- 0102+ 010304 010305 0104+ 015502 015505 015506 015507 015508 015509 015510 015511 015602 015605 015702 015705 015802 015805 0159+ 0160+ 0161+ 0162+ 0163+ 0165+ 0170+ 017502 017505
+ 0102+ 010304 010305 0104+ 015502 015505 015506 015507 015508 015509 015510 015511 015602 015605 015702 015705 015802 015805 016102 016105 016502 016505 0170+ 017502 017505 018002 018005 018502 018505 025502 025505
3
mozart calisson stevens nano amerique
@@ -23,7 +23,7 @@
$OPENAIR_DIR/cmake_targets/at_commands/build/at_nas_ue
$OPENAIR_DIR/cmake_targets/nas_sim_tools/build/usim
$OPENAIR_DIR/cmake_targets/nas_sim_tools/build/nvram
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
@@ -43,7 +43,7 @@
$OPENAIR_DIR/cmake_targets/at_commands/build/at_nas_ue
$OPENAIR_DIR/cmake_targets/nas_sim_tools/build/usim
$OPENAIR_DIR/cmake_targets/nas_sim_tools/build/nvram
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
@@ -63,7 +63,7 @@
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/rb_tool
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/CMakeFiles/oai_nw_drv/oai_nw_drv.ko
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
@@ -83,7 +83,7 @@
$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/rb_tool
$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko
$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/liboai_usrpdevif.so
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
@@ -105,7 +105,7 @@
$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/CMakeFiles/openair_rf/openair_rf.ko
$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/updatefw
$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/oarf_config_exmimo.oct
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
@@ -125,7 +125,7 @@
$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/rb_tool
$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko
$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/liboai_bladerfdevif.so
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
@@ -145,7 +145,7 @@
$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/rb_tool
$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko
$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/liboai_eth_transpro.so
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
@@ -165,7 +165,7 @@
--eNB -w USRP -r Rel10 -c
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/liboai_usrpdevif.so
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
@@ -185,7 +185,7 @@
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/CMakeFiles/openair_rf/openair_rf.ko
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/updatefw
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/oarf_config_exmimo.oct
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
@@ -203,7 +203,7 @@
--eNB -w BLADERF -r Rel10 -c
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/liboai_bladerfdevif.so
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
@@ -221,7 +221,7 @@
--eNB -w None -t ETHERNET -r Rel10 -c
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/liboai_eth_transpro.so
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
@@ -254,7 +254,7 @@
$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_kdf
$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_aes128_cmac_encrypt
$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eia2
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
@@ -274,7 +274,7 @@
$OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw
$OPENAIR_DIR/cmake_targets/rrh_gw/build/liboai_usrpdevif.so
$OPENAIR_DIR/cmake_targets/rrh_gw/build/liboai_eth_transpro.so
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
@@ -296,7 +296,7 @@
$OPENAIR_DIR/cmake_targets/rrh_gw/build/oarf_config_exmimo.oct
$OPENAIR_DIR/cmake_targets/rrh_gw/build/liboai_exmimodevif.so
$OPENAIR_DIR/cmake_targets/rrh_gw/build/liboai_eth_transpro.so
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
@@ -315,7 +315,7 @@
$OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw
$OPENAIR_DIR/cmake_targets/rrh_gw/build/liboai_bladerfdevif.so
$OPENAIR_DIR/cmake_targets/rrh_gw/build/liboai_eth_transpro.so
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
@@ -332,7 +332,7 @@
cp -vf $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band38.generic.oaisim.local_no_mme.conf $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf
$OPENAIR_DIR/cmake_targets/build_oai
--oaisim --noS1 -c
- $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
@@ -355,7 +355,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--oaisim --noS1 -c
- $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
-O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 1 -a -s15
@@ -377,7 +377,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--oaisim --noS1 -c
- $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
-O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 1 -s15
@@ -399,7 +399,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--oaisim --noS1 -c
- $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
-O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 1 -a -s15
@@ -420,7 +420,7 @@
cp -vf $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band38.generic.oaisim.local_no_mme.conf $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf
$OPENAIR_DIR/cmake_targets/build_oai
--oaisim --noS1 -c
- $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
@@ -442,7 +442,7 @@
cp -vf $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band38.generic.oaisim.local_no_mme.conf $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf
$OPENAIR_DIR/cmake_targets/build_oai
--oaisim --noS1 -c
- $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
@@ -464,7 +464,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--oaisim --noS1 -c
- $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 1 -F -s15
@@ -485,7 +485,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--oaisim --noS1 -c
- $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 1 -F -a -s15
@@ -506,7 +506,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--oaisim --noS1 -c
- $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 1 -F -s15
@@ -527,7 +527,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--oaisim --noS1 -c
- $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 1 -F -a -s15
@@ -548,7 +548,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--oaisim --noS1 -c
- $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 1 -F -c26
@@ -569,7 +569,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--oaisim --noS1 -c
- $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 1 -F -c26 -a
@@ -590,7 +590,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--oaisim --noS1 -c
- $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -l7 -x 1 -Q3 -n 100 -b1 -u1
@@ -606,7 +606,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--oaisim --noS1 -c
- $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -l7 -x 1 -T mscbr -Q3 -n 100 -b1 -u1
@@ -622,7 +622,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--oaisim --noS1 -c
- $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -l7 -F -T mscbr -x 1 -Q3 -n 100 -b1 -u1
@@ -638,7 +638,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--oaisim --noS1 -c
- $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -l7 -c43 -F -T mbvbr -Q4 -j1 -n120
@@ -654,7 +654,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--core_simulators -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_aes128_cmac_encrypt
--verbose
@@ -670,7 +670,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--core_simulators -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_aes128_ctr_decrypt
--verbose
@@ -686,7 +686,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--core_simulators -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_aes128_ctr_encrypt
--verbose
@@ -702,7 +702,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--core_simulators -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_kenb
--verbose
@@ -718,7 +718,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--core_simulators -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas
--verbose
@@ -734,7 +734,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--core_simulators -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eea1
--verbose
@@ -750,7 +750,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--core_simulators -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eea2
--verbose
@@ -766,7 +766,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--core_simulators -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eia1
--verbose
@@ -782,7 +782,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--core_simulators -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eia1
--verbose
@@ -798,7 +798,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--core_simulators -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_kdf
--verbose
@@ -825,7 +825,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--phy_simulators -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte-simulators/build/dlsim
-m5 -gF -s-1 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O70 -L
@@ -856,7 +856,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--phy_simulators -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte-simulators/build/ulsim
-B25 -m5 -y1 -gN -x1 -s6 -w1.0 -e.1 -P -n500 -O70 -L
@@ -898,7 +898,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
@@ -912,7 +912,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -930,7 +930,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -973,7 +973,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
@@ -981,13 +981,13 @@
- True
+ False
/tmp
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -995,7 +995,7 @@
- True
+ False
sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
/tmp
@@ -1005,7 +1005,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -1015,7 +1015,7 @@
throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec
- True
+ False
USRPb210.ALU_EPC.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX
10
@@ -1047,7 +1047,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
@@ -1055,13 +1055,13 @@
- True
+ False
/tmp
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -1069,7 +1069,7 @@
- True
+ False
sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
/tmp
@@ -1079,7 +1079,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -1089,7 +1089,7 @@
throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec
- True
+ False
USRPb210.ALU_EPC.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX
10
@@ -1121,7 +1121,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
@@ -1129,19 +1129,19 @@
- True
+ False
/tmp
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2
- True
+ False
sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
throughput_test min=4.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec
@@ -1153,7 +1153,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -1162,7 +1162,7 @@
$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1
- True
+ False
USRPb210.ALU_EPC.Bandrich.5MHz.FDD.Band_7.DL.1TX.1RX
10
@@ -1194,7 +1194,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
@@ -1202,12 +1202,12 @@
- True
+ False
/tmp
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -1215,7 +1215,7 @@
throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec
- True
+ False
sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
@@ -1226,7 +1226,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -1235,7 +1235,7 @@
$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1
- True
+ False
USRPb210.ALU_EPC.Bandrich.10MHz.FDD.Band_7.DL.1TX.1RX
10
@@ -1267,7 +1267,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
@@ -1275,13 +1275,13 @@
- True
+ False
/tmp
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -1289,7 +1289,7 @@
throughput_test min=15.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec
- True
+ False
sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
@@ -1300,7 +1300,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -1309,7 +1309,7 @@
$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1
- True
+ False
USRPb210.ALU_EPC.Bandrich.20MHz.FDD.Band_7.DL.1TX.1RX
10
@@ -1342,7 +1342,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
@@ -1350,13 +1350,13 @@
- True
+ False
/tmp
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue;$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -1364,7 +1364,7 @@
- True
+ False
sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
/tmp
@@ -1374,7 +1374,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -1384,7 +1384,7 @@
throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec
- True
+ False
USRPb210.ALU_EPC.Bandrich.5MHz.FDD.Band_7.UL.2TX.2RX
10
@@ -1417,7 +1417,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
@@ -1425,12 +1425,12 @@
- True
+ False
/tmp
>
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue;$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -1438,7 +1438,7 @@
- True
+ False
sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
/tmp
@@ -1448,7 +1448,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -1458,7 +1458,7 @@
throughput_test min=2.0Mbits/sec max=2.0Mbits/sec average=2.0Mbits/sec
- True
+ False
USRPb210.ALU_EPC.Bandrich.10MHz.FDD.Band_7.UL.2TX.2RX
10
@@ -1490,7 +1490,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
@@ -1498,13 +1498,13 @@
- True
+ False
/tmp
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -1512,7 +1512,7 @@
- True
+ False
sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
/tmp
@@ -1522,7 +1522,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -1532,7 +1532,7 @@
throughput_test min=4.0Mbits/sec max=4.0Mbits/sec average=4.0Mbits/sec
- True
+ False
USRPb210.ALU_EPC.Bandrich.20MHz.FDD.Band_7.UL.2TX.2RX
10
@@ -1564,7 +1564,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
@@ -1572,13 +1572,13 @@
- True
+ False
/tmp
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -1586,7 +1586,7 @@
throughput_test min=4.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec
- True
+ False
sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
@@ -1597,7 +1597,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -1606,7 +1606,7 @@
$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1
- True
+ False
USRPb210.ALU_EPC.Bandrich.5MHz.FDD.Band_7.DL.2TX.2RX
10
@@ -1638,7 +1638,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
@@ -1646,13 +1646,13 @@
- True
+ False
/tmp
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -1660,7 +1660,7 @@
throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec
- True
+ False
sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
@@ -1671,7 +1671,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -1680,7 +1680,7 @@
$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1
- True
+ False
USRPb210.ALU_EPC.Bandrich.10MHz.FDD.Band_7.DL.2TX.2RX
10
@@ -1712,7 +1712,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
@@ -1720,13 +1720,13 @@
- True
+ False
/tmp
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -1734,7 +1734,7 @@
throughput_test min=15.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec
- True
+ False
sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
@@ -1745,7 +1745,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -1754,7 +1754,7 @@
$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1
- True
+ False
USRPb210.ALU_EPC.Bandrich.20MHz.FDD.Band_7.DL.2TX.2RX
10
@@ -1768,30 +1768,30 @@
calisson
390
/tmp
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf N_RB_DL 25
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf pdsch_referenceSignalPower -26
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mme_ip_address "ipv4=\"192.170.0.1\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tx_gain 90
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf rx_gain 125
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf nb_antennas_rx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf nb_antennas_tx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5:3\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.170.0.2/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5:4\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.170.1.2/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_PORT_FOR_S1U 2152
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -26
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.170.0.1\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5:3\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.170.0.2/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5:4\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.170.1.2/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -c
- sleep 15; sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ; sudo -E ifconfig eth5:3 192.170.0.2 up ; sudo -E ifconfig eth5:4 192.170.1.2 up; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E ifconfig eth5:3 192.170.0.2 up ; sudo -E ifconfig eth5:4 192.170.1.2 up; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
- -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf -W
+ -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W
@@ -1802,7 +1802,7 @@
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -1829,7 +1829,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ; sudo -E ifconfig eth5 add 192.172.0.1
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E ifconfig eth5 add 192.172.0.1
$OPENAIRCN_DIR/SCRIPTS/run_epc
-i -r
@@ -1852,30 +1852,30 @@
calisson
390
/tmp
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf N_RB_DL 50
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf pdsch_referenceSignalPower -29
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mme_ip_address "ipv4=\"192.170.0.1\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tx_gain 90
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf rx_gain 125
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf nb_antennas_rx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf nb_antennas_tx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5:3\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.170.0.2/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5:4\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.170.1.2/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_PORT_FOR_S1U 2152
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 50
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -29
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.170.0.1\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5:3\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.170.0.2/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5:4\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.170.1.2/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -c
- sleep 15; sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth5:3 192.170.0.2 up ; sudo -E ifconfig eth5:4 192.170.1.2 up; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth5:3 192.170.0.2 up ; sudo -E ifconfig eth5:4 192.170.1.2 up; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
- -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf -W
+ -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W
@@ -1886,7 +1886,7 @@
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -1913,7 +1913,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth5 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth5 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
$OPENAIRCN_DIR/SCRIPTS/run_epc
-i -r
@@ -1936,30 +1936,30 @@
calisson
390
/tmp
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf N_RB_DL 100
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf pdsch_referenceSignalPower -29
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mme_ip_address "ipv4=\"192.170.0.1\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tx_gain 90
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf rx_gain 125
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf nb_antennas_rx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf nb_antennas_tx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5:3\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.170.0.2/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5:4\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.170.1.2/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_PORT_FOR_S1U 2152
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 100
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -29
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.170.0.1\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5:3\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.170.0.2/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5:4\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.170.1.2/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -c
- sleep 15; sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth5:3 192.170.0.2 up ; sudo -E ifconfig eth5:4 192.170.1.2 up; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth5:3 192.170.0.2 up ; sudo -E ifconfig eth5:4 192.170.1.2 up; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
- -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf -W
+ -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W
@@ -1970,7 +1970,7 @@
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -1997,7 +1997,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ; sudo -E ifconfig eth5 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E ifconfig eth5 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
$OPENAIRCN_DIR/SCRIPTS/run_epc
-i -r
@@ -2020,30 +2020,30 @@
calisson
390
/tmp
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf N_RB_DL 25
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf pdsch_referenceSignalPower -26
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mme_ip_address "ipv4=\"192.170.0.1\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tx_gain 90
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf rx_gain 125
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf nb_antennas_rx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf nb_antennas_tx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5:3\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.170.0.2/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5:4\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.170.1.2/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_PORT_FOR_S1U 2152
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -26
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.170.0.1\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5:3\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.170.0.2/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5:4\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.170.1.2/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -c
- sleep 15; sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth5:3 192.170.0.2 up ; sudo -E ifconfig eth5:4 192.170.1.2 up; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth5:3 192.170.0.2 up ; sudo -E ifconfig eth5:4 192.170.1.2 up; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
- -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf -W
+ -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W
@@ -2054,7 +2054,7 @@
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -2081,7 +2081,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth5 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth5 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
$OPENAIRCN_DIR/SCRIPTS/run_epc
-i -r
@@ -2104,30 +2104,30 @@
calisson
390
/tmp
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf N_RB_DL 50
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf pdsch_referenceSignalPower -29
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mme_ip_address "ipv4=\"192.170.0.1\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tx_gain 90
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf rx_gain 125
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf nb_antennas_rx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf nb_antennas_tx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5:3\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.170.0.2/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5:4\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.170.1.2/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_PORT_FOR_S1U 2152
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 50
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -29
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.170.0.1\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5:3\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.170.0.2/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5:4\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.170.1.2/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -c
- sleep 15; sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth5:3 192.170.0.2 up ; sudo -E ifconfig eth5:4 192.170.1.2 up; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth5:3 192.170.0.2 up ; sudo -E ifconfig eth5:4 192.170.1.2 up; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
- -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf -W
+ -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W
@@ -2138,7 +2138,7 @@
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -2165,7 +2165,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth5 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth5 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
$OPENAIRCN_DIR/SCRIPTS/run_epc
-i -r
@@ -2188,30 +2188,30 @@
calisson
390
/tmp
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf N_RB_DL 100
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf pdsch_referenceSignalPower -29
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mme_ip_address "ipv4=\"192.170.0.1\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tx_gain 90
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf rx_gain 125
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf nb_antennas_rx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf nb_antennas_tx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5:3\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.170.0.2/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5:4\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.170.1.2/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_PORT_FOR_S1U 2152
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 100
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -29
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.170.0.1\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5:3\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.170.0.2/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5:4\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.170.1.2/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -c
- sleep 15; sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth5:3 192.170.0.2 up ; sudo -E ifconfig eth5:4 192.170.1.2 up; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth5:3 192.170.0.2 up ; sudo -E ifconfig eth5:4 192.170.1.2 up; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
- -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf -W
+ -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W
@@ -2222,7 +2222,7 @@
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -2249,7 +2249,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth5 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth5 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
$OPENAIRCN_DIR/SCRIPTS/run_epc
-i -r
@@ -2292,7 +2292,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -c
- sleep 15; sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
@@ -2306,7 +2306,7 @@
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -2334,7 +2334,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ; sudo -E ifconfig eth0 add 192.172.0.1
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E ifconfig eth0 add 192.172.0.1
$OPENAIRCN_DIR/SCRIPTS/run_epc
-r
@@ -2377,7 +2377,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -c
- sleep 15; sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
@@ -2391,7 +2391,7 @@
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -2418,7 +2418,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth0 add 192.172.0.1; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth0 add 192.172.0.1; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
$OPENAIRCN_DIR/SCRIPTS/run_epc
-r
@@ -2461,7 +2461,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -c
- sleep 15; sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth0:3 192.170.0.2 up ; sudo -E ifconfig eth0:4 192.170.1.2 up; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth0:3 192.170.0.2 up ; sudo -E ifconfig eth0:4 192.170.1.2 up; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
@@ -2475,7 +2475,7 @@
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -2502,7 +2502,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ; sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
$OPENAIRCN_DIR/SCRIPTS/run_epc
-r
@@ -2545,7 +2545,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -c
- sleep 15; sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
@@ -2559,7 +2559,7 @@
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -2586,7 +2586,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
$OPENAIRCN_DIR/SCRIPTS/run_epc
-r
@@ -2629,7 +2629,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -c
- sleep 15; sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
@@ -2643,7 +2643,7 @@
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -2670,7 +2670,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
$OPENAIRCN_DIR/SCRIPTS/run_epc
-r
@@ -2713,7 +2713,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -c
- sleep 15; sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
@@ -2727,7 +2727,7 @@
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -2754,7 +2754,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth0 add 192.172.0.1 ;cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth0 add 192.172.0.1 ;cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
$OPENAIRCN_DIR/SCRIPTS/run_epc
-r
@@ -2795,7 +2795,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
- sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf -W
@@ -2803,12 +2803,12 @@
- True
+ False
/tmp
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -2816,7 +2816,7 @@
- True
+ False
sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
/tmp
@@ -2826,7 +2826,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -2836,7 +2836,7 @@
throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec
- True
+ False
USRPx310.ALU_EPC.Bandrich.5MHz.FDD.Band_7.UL.1TX.1RX
10
@@ -2867,7 +2867,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
- sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf -W
@@ -2875,12 +2875,12 @@
- True
+ False
/tmp
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -2888,7 +2888,7 @@
- True
+ False
sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
/tmp
@@ -2898,7 +2898,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -2908,7 +2908,7 @@
throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec
- True
+ False
USRPx310.ALU_EPC.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX
10
@@ -2938,7 +2938,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
- sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf -W
@@ -2946,13 +2946,13 @@
- True
+ False
/tmp
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -2960,7 +2960,7 @@
- True
+ False
sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
/tmp
@@ -2970,7 +2970,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -2980,7 +2980,7 @@
throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec
- True
+ False
USRPx310.ALU_EPC.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX
10
@@ -3010,7 +3010,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
- sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf -W
@@ -3018,19 +3018,19 @@
- True
+ False
/tmp
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2
- True
+ False
sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
throughput_test min=4.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec
@@ -3042,7 +3042,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -3051,7 +3051,7 @@
$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1
- True
+ False
USRPx310.ALU_EPC.Bandrich.5MHz.FDD.Band_7.DL.1TX.1RX
10
@@ -3081,7 +3081,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
- sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail
sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf -W
@@ -3089,19 +3089,19 @@
- True
+ False
/tmp
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2
- True
+ False
sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec
@@ -3113,7 +3113,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -3122,7 +3122,7 @@
$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1
- True
+ False
USRPx310.ALU_EPC.Bandrich.10MHz.FDD.Band_7.DL.1TX.1RX
10
@@ -3160,19 +3160,19 @@
- True
+ False
/tmp
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2
- True
+ False
sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
throughput_test min=15.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec
@@ -3184,7 +3184,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -3193,7 +3193,7 @@
$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1
- True
+ False
USRPx310.ALU_EPC.Bandrich.20MHz.FDD.Band_7.DL.1TX.1RX
10
@@ -3226,7 +3226,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
- sleep 15; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf -W
@@ -3240,7 +3240,7 @@
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -3267,7 +3267,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ; sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
$OPENAIRCN_DIR/SCRIPTS/run_epc
-r
@@ -3309,7 +3309,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
- sleep 15; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf -W
@@ -3317,13 +3317,13 @@
- True
+ False
/tmp
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -3350,7 +3350,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
$OPENAIRCN_DIR/SCRIPTS/run_epc
-r
@@ -3390,7 +3390,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
- sleep 15; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf -W
@@ -3404,7 +3404,7 @@
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -3431,7 +3431,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ; sudo -E ifconfig eth0 add 192.172.0.1
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E ifconfig eth0 add 192.172.0.1
$OPENAIRCN_DIR/SCRIPTS/run_epc
-r
@@ -3471,7 +3471,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
- sleep 15; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf -W
@@ -3485,7 +3485,7 @@
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -3512,7 +3512,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
$OPENAIRCN_DIR/SCRIPTS/run_epc
-r
@@ -3552,7 +3552,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
- sleep 15; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15;$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf -W
@@ -3566,7 +3566,7 @@
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -3593,7 +3593,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf
$OPENAIRCN_DIR/SCRIPTS/run_epc
-r
@@ -3633,7 +3633,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
- sleep 15; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf -W
@@ -3641,13 +3641,13 @@
- True
+ False
/tmp
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -3674,7 +3674,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
$OPENAIRCN_DIR/SCRIPTS/run_epc
-r
@@ -3714,7 +3714,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w EXMIMO -x -c
- sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2; dmesg|tail
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2; dmesg|tail
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W
@@ -3722,12 +3722,12 @@
- True
+ False
/tmp
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -3735,7 +3735,7 @@
- True
+ False
sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
/tmp
@@ -3745,7 +3745,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -3755,7 +3755,7 @@
throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec
- True
+ False
EXMIMO.ALU_EPC.Bandrich.5MHz.FDD.Band_7.UL.1TX.1RX
10
@@ -3786,7 +3786,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w EXMIMO -x -c
- sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W
@@ -3794,13 +3794,13 @@
- True
+ False
/tmp
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -3808,7 +3808,7 @@
- True
+ False
sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
/tmp
@@ -3818,7 +3818,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -3828,7 +3828,7 @@
throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec
- True
+ False
EXMIMO.ALU_EPC.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX
10
@@ -3858,7 +3858,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w EXMIMO -x -c
- sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W
@@ -3866,13 +3866,13 @@
- True
+ False
/tmp
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -3880,21 +3880,17 @@
- True
+ False
sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
/tmp
- BUILD/EPC/epc.local.enb.conf.in MCC \"208\"
- BUILD/EPC/epc.local.enb.conf.in MNC \"92\"
- BUILD/EPC/epc.local.enb.conf.in TAC \"1\"
- BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth5\"
- BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\"
- SCRIPTS/build_epc
- -c -l
- SCRIPTS/build_hss
- -c -l
+
+
+
+
+
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -3904,7 +3900,7 @@
throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec
- True
+ False
EXMIMO.ALU_EPC.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX
10
@@ -3934,7 +3930,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w EXMIMO -x -c
- sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W
@@ -3942,19 +3938,19 @@
- True
+ False
/tmp
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2
- True
+ False
sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
throughput_test min=4.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec
@@ -3966,7 +3962,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -3975,7 +3971,7 @@
$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1
- True
+ False
EXMIMO.ALU_EPC.Bandrich.5MHz.FDD.Band_7.DL.1TX.1RX
10
@@ -4005,7 +4001,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w EXMIMO -x -c
- sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W
@@ -4013,19 +4009,19 @@
- True
+ False
/tmp
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2
- True
+ False
sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec
@@ -4037,7 +4033,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -4046,7 +4042,7 @@
$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1
- True
+ False
EXMIMO.ALU_EPC.Bandrich.10MHz.FDD.Band_7.DL.1TX.1RX
10
@@ -4076,7 +4072,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w EXMIMO -x -c
- sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W
@@ -4084,19 +4080,19 @@
- True
+ False
/tmp
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2
- True
+ False
sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
throughput_test min=15.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec
@@ -4108,7 +4104,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -4117,7 +4113,7 @@
$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1
- True
+ False
EXMIMO.ALU_EPC.Bandrich.20MHz.FDD.Band_7.DL.1TX.1RX
10
@@ -4149,7 +4145,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w EXMIMO -x -c
- sleep 15; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15;$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf $OPENAIR_TESTDIR/enb.conf
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W
@@ -4164,7 +4160,7 @@
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -4191,7 +4187,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ; sudo -E ifconfig eth0 add 192.172.0.1 ;cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E ifconfig eth0 add 192.172.0.1 ;cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
$OPENAIRCN_DIR/SCRIPTS/run_epc
-r
@@ -4233,7 +4229,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w EXMIMO -x -c
- sleep 15; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf $OPENAIR_TESTDIR/enb.conf
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W
@@ -4247,7 +4243,7 @@
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -4274,7 +4270,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
$OPENAIRCN_DIR/SCRIPTS/run_epc
-r
@@ -4314,7 +4310,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w EXMIMO -x -c
- sleep 15; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15;$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf $OPENAIR_TESTDIR/enb.conf
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W
@@ -4328,7 +4324,7 @@
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -4355,7 +4351,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ; sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
$OPENAIRCN_DIR/SCRIPTS/run_epc
-r
@@ -4395,7 +4391,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w EXMIMO -x -c
- sleep 15; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15;$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf $OPENAIR_TESTDIR/enb.conf
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W
@@ -4409,7 +4405,7 @@
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -4436,7 +4432,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth0 add 192.172.0.1 ;cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth0 add 192.172.0.1 ;cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
$OPENAIRCN_DIR/SCRIPTS/run_epc
-r
@@ -4476,7 +4472,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w EXMIMO -x -c
- sleep 15; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15;$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf $OPENAIR_TESTDIR/enb.conf
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W
@@ -4490,7 +4486,7 @@
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -4517,7 +4513,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
$OPENAIRCN_DIR/SCRIPTS/run_epc
-r
@@ -4557,7 +4553,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w EXMIMO -x -c
- sleep 15; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf $OPENAIR_TESTDIR/enb.conf
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W
@@ -4571,7 +4567,7 @@
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -4598,7 +4594,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth0 add 192.172.0.1
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth0 add 192.172.0.1
$OPENAIRCN_DIR/SCRIPTS/run_epc
-r
@@ -4642,7 +4638,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w BLADERF -x -c
- sudo -E $OPENAIR_DIR/cmake_targets/tools/start_bladerf.py
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E $OPENAIR_DIR/cmake_targets/tools/start_bladerf.py
sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf -W
@@ -4656,7 +4652,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -4674,7 +4670,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -4718,7 +4714,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w BLADERF -x -c
- sudo -E $OPENAIR_DIR/cmake_targets/tools/start_bladerf.py
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E $OPENAIR_DIR/cmake_targets/tools/start_bladerf.py
sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf -W
@@ -4732,7 +4728,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -4740,7 +4736,7 @@
- True
+ False
sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
/tmp
@@ -4750,7 +4746,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -4760,7 +4756,7 @@
throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec
- True
+ False
BladeRF.ALU_EPC.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX
10
@@ -4793,7 +4789,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w BLADERF -x -c
- sudo -E $OPENAIR_DIR/cmake_targets/tools/start_bladerf.py
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E $OPENAIR_DIR/cmake_targets/tools/start_bladerf.py
sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf -W
@@ -4807,7 +4803,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -4815,7 +4811,7 @@
- True
+ False
sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
/tmp
@@ -4825,7 +4821,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -4835,7 +4831,7 @@
throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec
- True
+ False
BladeRF.ALU_EPC.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX
10
@@ -4868,7 +4864,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w BLADERF -x -c
- sudo -E $OPENAIR_DIR/cmake_targets/tools/start_bladerf.py
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E $OPENAIR_DIR/cmake_targets/tools/start_bladerf.py
sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf -W
@@ -4882,13 +4878,13 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2
- True
+ False
sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
throughput_test min=4.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec
@@ -4900,7 +4896,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -4909,7 +4905,7 @@
$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1
- True
+ False
BladeRF.ALU_EPC.Bandrich.5MHz.FDD.Band_7.DL.1TX.1RX
10
@@ -4942,7 +4938,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w BLADERF -x -c
- sudo -E $OPENAIR_DIR/cmake_targets/tools/start_bladerf.py
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E $OPENAIR_DIR/cmake_targets/tools/start_bladerf.py
sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf -W
@@ -4955,7 +4951,7 @@
/tmp
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -4963,7 +4959,7 @@
throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec
- True
+ False
sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
@@ -4974,7 +4970,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -4983,7 +4979,7 @@
$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1
- True
+ False
BladeRF.ALU_EPC.Bandrich.10MHz.FDD.Band_7.DL.1TX.1RX
10
@@ -5016,7 +5012,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w BLADERF -x -c
- sudo -E $OPENAIR_DIR/cmake_targets/tools/start_bladerf.py
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E $OPENAIR_DIR/cmake_targets/tools/start_bladerf.py
sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf -W
@@ -5030,7 +5026,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -5038,7 +5034,7 @@
throughput_test min=15.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec
- True
+ False
sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
@@ -5049,7 +5045,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -5058,7 +5054,7 @@
$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1
- True
+ False
BladeRF.ALU_EPC.Bandrich.20MHz.FDD.Band_7.DL.1TX.1RX
10
@@ -5091,7 +5087,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w LMSSDR -x -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf -W
@@ -5105,7 +5101,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -5123,7 +5119,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -5167,7 +5163,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w LMSSDR -x -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf -W
@@ -5181,7 +5177,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -5189,7 +5185,7 @@
- True
+ False
sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
/tmp
@@ -5199,7 +5195,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -5209,7 +5205,7 @@
throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec
- True
+ False
SoDeRa.ALU_EPC.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX
10
@@ -5242,7 +5238,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w LMSSDR -x -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf -W
@@ -5256,7 +5252,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -5264,7 +5260,7 @@
- True
+ False
sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
/tmp
@@ -5274,7 +5270,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -5284,7 +5280,7 @@
throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec
- True
+ False
SoDeRa.ALU_EPC.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX
10
@@ -5317,7 +5313,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w LMSSDR -x -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf -W
@@ -5331,13 +5327,13 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2
- True
+ False
sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
throughput_test min=4.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec
@@ -5349,7 +5345,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -5358,7 +5354,7 @@
$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1
- True
+ False
BladeRF.ALU_EPC.Bandrich.5MHz.FDD.Band_7.DL.1TX.1RX
10
@@ -5391,7 +5387,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w LMSSDR -x -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf -W
@@ -5404,7 +5400,7 @@
/tmp
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -5412,7 +5408,7 @@
throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec
- True
+ False
sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
@@ -5423,7 +5419,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -5432,7 +5428,7 @@
$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1
- True
+ False
SoDeRa.ALU_EPC.Bandrich.10MHz.FDD.Band_7.DL.1TX.1RX
10
@@ -5465,7 +5461,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w LMSSDR -x -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf -W
@@ -5479,7 +5475,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -5487,7 +5483,7 @@
throughput_test min=15.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec
- True
+ False
sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
@@ -5498,7 +5494,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -5507,7 +5503,7 @@
$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1
- True
+ False
SoDeRa.ALU_EPC.Bandrich.20MHz.FDD.Band_7.DL.1TX.1RX
10
@@ -5542,7 +5538,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf rrh_gw_config "local_if_name=\"eth0\";remote_address=\"10:60:4b:75:80:83\";local_address=\"98:90:96:df:66:07\";local_port=50000;remote_port=50000;tr_preference=\"raw\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=70;tx_scheduling_advance=9;rrh_gw_active=\"yes\";"
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w None -t ETHERNET -x -c --disable-deadline
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
sleep 5; sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf -W
@@ -5554,7 +5550,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--RRH -w USRP -t ETHERNET -c --disable-deadline
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw
-n1 -x -m1 -i eth1
@@ -5566,7 +5562,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -5584,7 +5580,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -5630,7 +5626,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf rrh_gw_config "local_if_name=\"eth0\";remote_address=\"10:60:4b:75:80:83\";local_address=\"98:90:96:df:66:07\";local_port=50000;remote_port=50000;tr_preference=\"raw\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=113;tx_scheduling_advance=9;rrh_gw_active=\"yes\";"
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w None -t ETHERNET -x -c --disable-deadline
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
sleep 5; sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf -W
@@ -5642,7 +5638,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--RRH -w USRP -t ETHERNET -c --disable-deadline
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw
-n1 -x -m1 -i eth1
@@ -5652,7 +5648,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -5660,7 +5656,7 @@
- True
+ False
sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
/tmp
@@ -5670,7 +5666,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -5680,7 +5676,7 @@
throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec
- True
+ False
USRPb210.RRH.ALU_EPC.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX
10
@@ -5715,7 +5711,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf rrh_gw_config "local_if_name=\"eth0\";remote_address=\"10:60:4b:75:80:83\";local_address=\"98:90:96:df:66:07\";local_port=50000;remote_port=50000;tr_preference=\"raw\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=115;tx_scheduling_advance=11;rrh_gw_active=\"yes\";"
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w None -t ETHERNET -x -c --disable-deadline
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
sleep 5; sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf -W
@@ -5727,7 +5723,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--RRH -w USRP -t ETHERNET -c --disable-deadline
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw
-n1 -x -m1 -i eth1
@@ -5737,7 +5733,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -5745,7 +5741,7 @@
- True
+ False
sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
/tmp
@@ -5755,7 +5751,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -5765,7 +5761,7 @@
throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec
- True
+ False
USRPb210.RRH.ALU_EPC.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX
10
@@ -5800,7 +5796,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf rrh_gw_config "local_if_name=\"eth0\";remote_address=\"10:60:4b:75:80:83\";local_address=\"98:90:96:df:66:07\";local_port=50000;remote_port=50000;tr_preference=\"raw\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=70;tx_scheduling_advance=9;rrh_gw_active=\"yes\";"
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w None -t ETHERNET -x -c --disable-deadline
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
sleep 5; sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf -W
@@ -5812,7 +5808,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--RRH -w USRP -t ETHERNET -c --disable-deadline
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw
-n1 -x -m1 -i eth1
@@ -5822,13 +5818,13 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2
- True
+ False
sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
throughput_test min=4.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec
@@ -5840,7 +5836,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -5849,7 +5845,7 @@
$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1
- True
+ False
USRPb210.RRH.ALU_EPC.Bandrich.5MHz.FDD.Band_7.DL.1TX.1RX
10
@@ -5884,7 +5880,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf rrh_gw_config "local_if_name=\"eth0\";remote_address=\"10:60:4b:75:80:83\";local_address=\"98:90:96:df:66:07\";local_port=50000;remote_port=50000;tr_preference=\"raw\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=113;tx_scheduling_advance=9;rrh_gw_active=\"yes\";"
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w None -t ETHERNET -x -c --disable-deadline
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
sleep 5; sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf -W
@@ -5896,7 +5892,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--RRH -w USRP -t ETHERNET -c --disable-deadline
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw
-n1 -x -m1 -i eth1
@@ -5905,7 +5901,7 @@
/tmp
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -5913,7 +5909,7 @@
throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec
- True
+ False
sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
@@ -5924,7 +5920,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -5933,7 +5929,7 @@
$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1
- True
+ False
USRPb210.RRH.ALU_EPC.Bandrich.10MHz.FDD.Band_7.DL.1TX.1RX
10
@@ -5968,7 +5964,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf rrh_gw_config "local_if_name=\"eth0\";remote_address=\"10:60:4b:75:80:83\";local_address=\"98:90:96:df:66:07\";local_port=50000;remote_port=50000;tr_preference=\"raw\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=115;tx_scheduling_advance=11;rrh_gw_active=\"yes\";"
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w None -t ETHERNET -x -c --disable-deadline
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
sleep 5; $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf -W
@@ -5980,7 +5976,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--RRH -w USRP -t ETHERNET -c --disable-deadline
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw
-n1 -x -m1 -i eth1
@@ -5990,15 +5986,15 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2
- throughput_test min=15.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec
+ throughput_test min=10.0Mbits/sec max=10.0Mbits/sec average=10.0Mbits/sec
- True
+ False
sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
@@ -6009,21 +6005,467 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000
- $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1
+ $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 15Mbits/s -B 192.172.0.1
- True
+ False
USRPb210.RRH.ALU_EPC.Bandrich.20MHz.FDD.Band_7.DL.1TX.1RX
10
+
+ lte-softmodem
+
+ calisson
+ stevens
+ amerique
+ 390
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 25
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
+
+ $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
+ -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
+
+
+
+
+ False
+
+ /tmp
+
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
+
+ sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2
+
+
+
+ False
+ sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue
+
+ /tmp
+
+
+
+
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
+
+ /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
+
+ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000
+
+ $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1
+
+ throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec
+
+ False
+ USRPb210.ALU_EPC.SonyExperiaM4.5MHz.FDD.Band_7.UL.1TX.1RX
+ 10
+
+
+
+
+ lte-softmodem
+
+ calisson
+ stevens
+ amerique
+ 390
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
+
+ $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
+ -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
+
+
+
+
+ False
+
+ /tmp
+
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
+
+ sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2
+
+
+
+ False
+ sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue
+
+ /tmp
+
+
+
+
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
+
+ /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
+
+ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000
+
+ $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1
+
+ throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec
+
+ False
+ USRPb210.ALU_EPC.SonyExperiaM4.10MHz.FDD.Band_7.UL.1TX.1RX
+ 10
+
+
+
+ lte-softmodem
+
+ calisson
+ stevens
+ amerique
+ 390
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 100
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
+
+ $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
+ -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
+
+
+
+
+ False
+
+ /tmp
+
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
+
+ sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2
+
+
+
+ False
+ sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue
+
+ /tmp
+
+
+
+
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
+
+ /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
+
+ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000
+
+ $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1
+
+ throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec
+
+ False
+ USRPb210.ALU_EPC.SonyExperiaM4.20MHz.FDD.Band_7.UL.1TX.1RX
+ 10
+
+
+
+ lte-softmodem
+
+ calisson
+ stevens
+ amerique
+ 390
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 25
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
+
+ $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
+ -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
+
+
+
+
+ False
+
+ /tmp
+
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
+
+ sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -s -i 1 -u -f m -B 192.172.0.2
+
+ throughput_test min=4.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec
+
+ False
+ sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue
+
+
+ /tmp
+
+
+
+
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
+
+ /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
+
+ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000
+
+ $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1
+
+
+ False
+ USRPb210.ALU_EPC.SonyExperiaM4.5MHz.FDD.Band_7.DL.1TX.1RX
+ 10
+
+
+
+ lte-softmodem
+
+ calisson
+ stevens
+ amerique
+ 390
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
+
+ $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
+ -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
+
+
+
+
+ False
+
+ /tmp
+
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
+
+ sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -s -i 1 -u -f m -B 192.172.0.2
+
+ throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec
+
+ False
+ sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue
+
+
+ /tmp
+
+
+
+
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
+
+ /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
+
+ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000
+
+ $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 15Mbits/s -B 192.172.0.1
+
+
+ False
+ USRPb210.ALU_EPC.SonyExperiaM4.10MHz.FDD.Band_7.DL.1TX.1RX
+ 10
+
+
+
+ lte-softmodem
+
+ calisson
+ stevens
+ amerique
+ 390
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 100
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
+
+ $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
+ -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
+
+
+
+
+ False
+
+ /tmp
+
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
+
+ sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -s -i 1 -u -f m -B 192.172.0.2
+
+ throughput_test min=10.0Mbits/sec max=10.0Mbits/sec average=10.0Mbits/sec
+
+ False
+ sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue
+
+
+ /tmp
+
+
+
+
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
+
+ /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
+
+ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000
+
+ $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 15Mbits/s -B 192.172.0.1
+
+
+ False
+ USRPb210.ALU_EPC.SonyExperiaM4.20MHz.FDD.Band_7.DL.1TX.1RX
+ 10
+
+
+
diff --git a/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py b/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py
index 99aed7c29f..3921afd8f2 100755
--- a/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py
+++ b/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py
@@ -1,4 +1,34 @@
#!/usr/bin/python
+#******************************************************************************
+
+# OpenAirInterface
+# Copyright(c) 1999 - 2014 Eurecom
+
+# OpenAirInterface is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+
+# OpenAirInterface is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with OpenAirInterface.The full GNU General Public License is
+# included in this distribution in the file called "COPYING". If not,
+# see .
+
+# Contact Information
+# OpenAirInterface Admin: openair_admin@eurecom.fr
+# OpenAirInterface Tech : openair_tech@eurecom.fr
+# OpenAirInterface Dev : openair4g-devel@lists.eurecom.fr
+
+# Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
+
+# *******************************************************************************/
+# \author Navid Nikaein, Rohit Gupta
import time
import serial
@@ -28,17 +58,22 @@ from lib_autotest import *
def find_open_port():
global serial_port, ser
max_ports=100
- if os.path.exists(serial_port) == True:
- return serial_port
- for port in range(2,100):
- serial_port = '/dev/ttyUSB'+str(port)
- if os.path.exists(serial_port) == True:
- print 'New Serial Port : ' + serial_port
- break
-
- ser = serial.Serial(port=serial_port)
- return
-
+ serial_port=''
+ while True:
+ if os.path.exists(serial_port) == True:
+ return serial_port
+ for port in range(2,100):
+ serial_port_tmp = '/dev/ttyUSB'+str(port)
+ if os.path.exists(serial_port_tmp) == True:
+ print 'New Serial Port : ' + serial_port_tmp
+ serial_port = serial_port_tmp
+ break
+ if serial_port == '':
+ print" Not able to detect valid serial ports. Resetting the modem now..."
+ reset_ue()
+ else :
+ ser = serial.Serial(port=serial_port)
+ return
#serial_port = '/dev/ttyUSB2'
diff --git a/cmake_targets/autotests/tools/configure_cots_huaweiE398_ue.py b/cmake_targets/autotests/tools/configure_cots_huaweiE398_ue.py
index 07d532c5d6..9646cc69ff 100755
--- a/cmake_targets/autotests/tools/configure_cots_huaweiE398_ue.py
+++ b/cmake_targets/autotests/tools/configure_cots_huaweiE398_ue.py
@@ -1,4 +1,34 @@
#!/usr/bin/python
+#******************************************************************************
+
+# OpenAirInterface
+# Copyright(c) 1999 - 2014 Eurecom
+
+# OpenAirInterface is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+
+# OpenAirInterface is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with OpenAirInterface.The full GNU General Public License is
+# included in this distribution in the file called "COPYING". If not,
+# see .
+
+# Contact Information
+# OpenAirInterface Admin: openair_admin@eurecom.fr
+# OpenAirInterface Tech : openair_tech@eurecom.fr
+# OpenAirInterface Dev : openair4g-devel@lists.eurecom.fr
+
+# Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
+
+# *******************************************************************************/
+# \author Navid Nikaein, Rohit Gupta
import time
import serial
@@ -28,16 +58,23 @@ from lib_autotest import *
def find_open_port():
global serial_port, ser
max_ports=100
- if os.path.exists(serial_port) == True:
- return serial_port
- for port in range(0,100):
- serial_port = '/dev/ttyUSB'+str(port)
- if os.path.exists(serial_port) == True:
- print 'New Serial Port : ' + serial_port
- break
+ serial_port=''
+ while True:
+ if os.path.exists(serial_port) == True:
+ return serial_port
+ for port in range(2,100):
+ serial_port_tmp = '/dev/ttyUSB'+str(port)
+ if os.path.exists(serial_port_tmp) == True:
+ print 'New Serial Port : ' + serial_port_tmp
+ serial_port = serial_port_tmp
+ break
+ if serial_port == '':
+ print" Not able to detect valid serial ports. Resetting the modem now..."
+ reset_ue()
+ else :
+ ser = serial.Serial(port=serial_port)
+ return
- ser = serial.Serial(port=serial_port)
- return
diff --git a/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py b/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py
new file mode 100755
index 0000000000..eba3156976
--- /dev/null
+++ b/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py
@@ -0,0 +1,118 @@
+#!/usr/bin/python
+
+import time
+import serial
+import os
+from pyroute2 import IPRoute
+import sys
+import re
+import threading
+import signal
+import traceback
+import os
+import commands
+
+# Find a device ID by running sudo adb devices
+# The device ID below is for Sony Xperia M4
+
+device_id='YT9115PX1E'
+
+
+openair_dir = os.environ.get('OPENAIR_DIR')
+if openair_dir == None:
+ print "Error getting OPENAIR_DIR environment variable"
+ sys.exit(1)
+
+sys.path.append(os.path.expandvars('$OPENAIR_DIR/cmake_targets/autotests/tools/'))
+
+from lib_autotest import *
+
+def signal_handler(signal, frame):
+ print('You pressed Ctrl+C!')
+ print('Exiting now...')
+ timeout=10
+ exit_flag=1
+ sys.exit(0)
+
+signal.signal(signal.SIGINT, signal_handler)
+
+# Find all the process IDs in a phone given the name of process
+def kill_processes(name):
+ print " Killing all processes by name..." + name
+ while 1:
+ cmd = 'sudo adb -s ' + device_id +' shell "ps |grep ' + name + '"'
+ status, out = commands.getstatusoutput(cmd)
+ if status != 0:
+ print "Error execting command to kill process " + name
+ sys.exit(1)
+ print "Out = " + out
+ if out=='':
+ break;
+ out_arr = out.split()
+ pid_to_kill = out_arr[1]
+ print "Now killing process ID " + pid_to_kill + " on Phone"
+ cmd = 'sudo adb -s ' + device_id +' shell "kill ' + pid_to_kill + '"'
+ status, out = commands.getstatusoutput(cmd)
+ if status != 0:
+ print "Error execting command to kill process " + name
+ sys.exit(1)
+ print "Out = " + out
+
+def start_ue () :
+ #print 'Enter your commands below.\r\nInsert "exit" to leave the application.'
+ print 'Killing old iperf/ping sessions'
+ kill_processes('iperf')
+ kill_processes('ping')
+ print "Turning off airplane mode"
+ os.system('sudo -E adb devices')
+ os.system('sudo -E adb -s ' + device_id + ' shell \"settings put global airplane_mode_on 0; am broadcast -a android.intent.action.AIRPLANE_MODE --ez state false\"')
+
+ while 1:
+ time.sleep ( 2)
+ #Now we check if ppp0 interface is up and running
+ try:
+ cmd = 'sudo adb -s ' + device_id + ' shell netcfg |grep 192.'
+ status, out = commands.getstatusoutput(cmd)
+ if (out == '') :
+ print "Waiting for UE to connect and get IP Address..."
+ else :
+ print "UE is now connected. IP Address settings are..." + out
+ os.system('sleep 5')
+ os.system ('sudo adb -s ' + device_id + ' shell ping ' + gw)
+ break
+ except Exception, e:
+ error = error + ' In function: ' + sys._getframe().f_code.co_name + ': *** Caught exception: ' + str(e.__class__) + " : " + str( e)
+ error = error + traceback.format_exc()
+ print error
+
+
+
+def stop_ue():
+ print "Turning on airplane mode"
+ os.system('sudo adb devices')
+ os.system('sudo adb -s ' + device_id + ' shell \"settings put global airplane_mode_on 1; am broadcast -a android.intent.action.AIRPLANE_MODE --ez state true\" ')
+ print "Killing iperf/ping sessions"
+ kill_processes('iperf')
+ kill_processes('ping')
+
+i=1
+gw='192.172.0.1'
+while i < len(sys.argv):
+ arg=sys.argv[i]
+ if arg == '--start-ue' :
+ start_ue()
+ elif arg == '--stop-ue' :
+ stop_ue()
+ elif arg == '-gw' :
+ gw = sys.argv[i+1]
+ i=i+1
+ elif arg == '-h' :
+ print "--stop-ue: Stop the UE. Turn on airplane mode"
+ print "--start-ue: Start the UE. Turn off airplane mode"
+ print "-gw: Specify the default gw as sometimes the gateway/route arguments are not set properly via wvdial"
+ else :
+ print " Script called with wrong arguments, arg = " + arg
+ sys.exit()
+ i = i +1
+
+
diff --git a/cmake_targets/autotests/tools/find_usb_path.bash b/cmake_targets/autotests/tools/find_usb_path.bash
index c8ec950292..d2a80cd6c2 100755
--- a/cmake_targets/autotests/tools/find_usb_path.bash
+++ b/cmake_targets/autotests/tools/find_usb_path.bash
@@ -1,4 +1,35 @@
#!/bin/bash
+#******************************************************************************
+
+# OpenAirInterface
+# Copyright(c) 1999 - 2014 Eurecom
+
+# OpenAirInterface is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+
+# OpenAirInterface is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with OpenAirInterface.The full GNU General Public License is
+# included in this distribution in the file called "COPYING". If not,
+# see .
+
+# Contact Information
+# OpenAirInterface Admin: openair_admin@eurecom.fr
+# OpenAirInterface Tech : openair_tech@eurecom.fr
+# OpenAirInterface Dev : openair4g-devel@lists.eurecom.fr
+
+# Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
+
+# *******************************************************************************/
+# \author Navid Nikaein, Rohit Gupta
+
#arg1 idVendor
#arg2 idProduct
diff --git a/cmake_targets/autotests/tools/iperf_script b/cmake_targets/autotests/tools/iperf_script
index ecd2f7a996..5f9baff09f 100755
--- a/cmake_targets/autotests/tools/iperf_script
+++ b/cmake_targets/autotests/tools/iperf_script
@@ -1,4 +1,34 @@
#!/bin/bash
+#******************************************************************************
+
+# OpenAirInterface
+# Copyright(c) 1999 - 2014 Eurecom
+
+# OpenAirInterface is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+
+# OpenAirInterface is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with OpenAirInterface.The full GNU General Public License is
+# included in this distribution in the file called "COPYING". If not,
+# see .
+
+# Contact Information
+# OpenAirInterface Admin: openair_admin@eurecom.fr
+# OpenAirInterface Tech : openair_tech@eurecom.fr
+# OpenAirInterface Dev : openair4g-devel@lists.eurecom.fr
+
+# Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
+
+# *******************************************************************************/
+# \author Navid Nikaein, Rohit Gupta
#arg1 timeout to wait before running the script
#arg2 interface
diff --git a/cmake_targets/autotests/tools/iperf_script_phone b/cmake_targets/autotests/tools/iperf_script_phone
new file mode 100755
index 0000000000..343813d4e0
--- /dev/null
+++ b/cmake_targets/autotests/tools/iperf_script_phone
@@ -0,0 +1,63 @@
+#!/bin/bash
+#******************************************************************************
+
+# OpenAirInterface
+# Copyright(c) 1999 - 2014 Eurecom
+
+# OpenAirInterface is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+
+# OpenAirInterface is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with OpenAirInterface.The full GNU General Public License is
+# included in this distribution in the file called "COPYING". If not,
+# see .
+
+# Contact Information
+# OpenAirInterface Admin: openair_admin@eurecom.fr
+# OpenAirInterface Tech : openair_tech@eurecom.fr
+# OpenAirInterface Dev : openair4g-devel@lists.eurecom.fr
+
+# Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
+
+# *******************************************************************************/
+# \author Navid Nikaein, Rohit Gupta
+
+#arg1 timeout to wait before running the script
+#arg2 interface
+#arg3 iperf arguments
+
+args=($*)
+timeout=${args[0]}
+device_id=${args[1]}
+iperf_args=(${args[@]:2})
+
+#array=${1:-1}
+echo "args = ${args[@]}"
+echo "timeout = $timeout"
+echo "device_id = $device_id"
+echo "iperf_args = ${iperf_args[@]}"
+
+sleep $timeout
+
+while true ; do
+ cmd=`sudo adb -s $device_id shell netcfg |grep 192.`
+ if [ -z "$cmd" ]; then
+ echo "Wating for UE to connect and get IP Address..."
+ sleep 1
+ else
+ echo "UE is not connected. IP Address settings are... $cmd"
+ break
+ fi
+done
+
+print "Starting iperf now..."
+
+sudo adb -s $device_id shell /data/local/tmp/iperf ${iperf_args[@]}
diff --git a/cmake_targets/autotests/tools/lib_autotest.py b/cmake_targets/autotests/tools/lib_autotest.py
index 67234de567..9ac2305250 100644
--- a/cmake_targets/autotests/tools/lib_autotest.py
+++ b/cmake_targets/autotests/tools/lib_autotest.py
@@ -1,4 +1,34 @@
#!/usr/bin/python
+#******************************************************************************
+
+# OpenAirInterface
+# Copyright(c) 1999 - 2014 Eurecom
+
+# OpenAirInterface is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+
+# OpenAirInterface is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with OpenAirInterface.The full GNU General Public License is
+# included in this distribution in the file called "COPYING". If not,
+# see .
+
+# Contact Information
+# OpenAirInterface Admin: openair_admin@eurecom.fr
+# OpenAirInterface Tech : openair_tech@eurecom.fr
+# OpenAirInterface Dev : openair4g-devel@lists.eurecom.fr
+
+# Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
+
+# *******************************************************************************/
+# \author Navid Nikaein, Rohit Gupta
import os
from pyroute2 import IPRoute
diff --git a/cmake_targets/autotests/tools/search_repl.py b/cmake_targets/autotests/tools/search_repl.py
index be0568599f..e43feccfb3 100755
--- a/cmake_targets/autotests/tools/search_repl.py
+++ b/cmake_targets/autotests/tools/search_repl.py
@@ -1,4 +1,35 @@
#!/usr/bin/python
+#******************************************************************************
+
+# OpenAirInterface
+# Copyright(c) 1999 - 2014 Eurecom
+
+# OpenAirInterface is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+
+# OpenAirInterface is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with OpenAirInterface.The full GNU General Public License is
+# included in this distribution in the file called "COPYING". If not,
+# see .
+
+# Contact Information
+# OpenAirInterface Admin: openair_admin@eurecom.fr
+# OpenAirInterface Tech : openair_tech@eurecom.fr
+# OpenAirInterface Dev : openair4g-devel@lists.eurecom.fr
+
+# Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
+
+# *******************************************************************************/
+# \author Navid Nikaein, Rohit Gupta
+
import sys
import re
import os
diff --git a/cmake_targets/epc_test/CMakeLists.template b/cmake_targets/epc_test/CMakeLists.template
index 25d94ea852..8a8223e4ae 100644
--- a/cmake_targets/epc_test/CMakeLists.template
+++ b/cmake_targets/epc_test/CMakeLists.template
@@ -1,11 +1,13 @@
cmake_minimum_required(VERSION 2.8)
set ( CMAKE_BUILD_TYPE "RelWithDebInfo" )
+set ( ASN_DEBUG False)
set ( ADDR_CONF False )
set ( DEBUG_OMG False )
set ( DISABLE_XER_PRINT False )
set ( DRIVER2013 True )
set ( EMOS False )
+set ( EMIT_ASN_DEBUG False )
set ( ENABLE_FXP True )
set ( ENABLE_ITTI True )
set ( ENABLE_NAS_UE_LOGGING True )
@@ -47,9 +49,9 @@ set ( OAI_EMU False )
set ( OAISIM False )
set ( OAI_NW_DRIVER_TYPE_ETHERNET False )
set ( OAI_NW_DRIVER_USE_NETLINK True )
-set ( OPENAIR1 False )
-set ( OPENAIR2 False )
-set ( OPENAIR_LTE F )
+set ( OPENAIR1 True )
+set ( OPENAIR2 True )
+set ( OPENAIR_LTE True )
set ( PACKAGE_NAME "epc_test" )
set ( PBS_SIM False )
set ( PDCP_USE_NETLINK True )
@@ -74,4 +76,4 @@ set ( SMBV False )
set ( TEST_OMG False )
set ( USE_MME "R10" )
set ( USER_MODE True )
-set ( XER_PRINT False )
+set ( XER_PRINT True )
diff --git a/cmake_targets/tools/build_helper b/cmake_targets/tools/build_helper
index 82602b8cee..294c5006a5 100755
--- a/cmake_targets/tools/build_helper
+++ b/cmake_targets/tools/build_helper
@@ -30,7 +30,7 @@
################################################################################
# file build_helper
# brief
-# author Laurent Thomas
+# authors Laurent Thomas, Lionel GAUTHIER
#
#######################################
SUDO='sudo -E'
@@ -269,7 +269,10 @@ check_install_oai_software() {
pydb \
wvdial \
python-numpy \
- sshpass
+ sshpass \
+ libxslt1-dev \
+ android-tools-adb
+
$SUDO update-alternatives --set liblapack.so /usr/lib/atlas-base/atlas/liblapack.so
if [ `lsb_release -rs` = '12.04' ] ; then
install_nettle_from_source
@@ -291,10 +294,12 @@ install_asn1c_from_source(){
$SUDO rm -rf /tmp/asn1c-r1516
mkdir -p /tmp/asn1c-r1516
cd /tmp/asn1c-r1516
- svn co https://github.com/vlm/asn1c/trunk /tmp/asn1c-r1516 -r 1516
- patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch.p0
- patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch_2.p0
- patch -p0 < $OPENAIR_DIR/openair2/RRC/LITE/MESSAGES/asn1c/asn1cpatch.p0
+ rm -rf /tmp/asn1c-r1516/*
+ svn co https://github.com/vlm/asn1c/trunk /tmp/asn1c-r1516 -r 1516 > /tmp/log_compile_asn1c
+ patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch.p0 >> /tmp/log_compile_asn1c
+ patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch_2.p0 >> /tmp/log_compile_asn1c
+ patch -p0 < $OPENAIR_DIR/openair2/RRC/LITE/MESSAGES/asn1c/asn1cpatch.p0 >> /tmp/log_compile_asn1c
+ patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch_3.p0 >> /tmp/log_compile_asn1c
./configure
make -j`nproc`
$SUDO make install
@@ -324,7 +329,6 @@ install_nas_tools() {
}
-
################################
# set_openair_env
###############################
diff --git a/cmake_targets/tools/build_test_epc_tools b/cmake_targets/tools/build_test_epc_tools
index aff2a26fc0..aa7103fd78 100755
--- a/cmake_targets/tools/build_test_epc_tools
+++ b/cmake_targets/tools/build_test_epc_tools
@@ -22,7 +22,7 @@
# Contact Information
# OpenAirInterface Admin: openair_admin@eurecom.fr
# OpenAirInterface Tech : openair_tech@eurecom.fr
-# OpenAirInterface Dev : openair4g-devel@eurecom.fr
+# OpenAirInterface Dev : openair4g-devel@lists.eurecom.fr
#
# Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
#
@@ -121,6 +121,7 @@ function main()
echo "Cleaning TEST_EPC"
fi
rm -f $OPENAIR_DIR/targets/bin/test_epc_generate_scenario
+ rm -f $OPENAIR_DIR/targets/bin/test_epc_play_scenario
rm -Rf build 2>&1
mkdir -m 777 -p -v build
fi
@@ -140,6 +141,13 @@ function main()
compilations \
epc_test test_epc_generate_scenario \
test_epc_generate_scenario $dbin/test_epc_generate_scenario
+
+ compilations \
+ epc_test test_epc_play_scenario \
+ test_epc_play_scenario $dbin/test_epc_play_scenario
+
+ $SUDO cp -upv test_epc_generate_scenario /usr/local/bin
+ $SUDO cp -upv test_epc_play_scenario /usr/local/bin
}
diff --git a/cmake_targets/tools/fix_asn1 b/cmake_targets/tools/fix_asn1
new file mode 100755
index 0000000000..0661d7878d
--- /dev/null
+++ b/cmake_targets/tools/fix_asn1
@@ -0,0 +1,177 @@
+#!/bin/bash
+
+# in those arrays, each line is:
+#
+
+RRC_Rel10=(
+ "SystemInformation-r8-IEs.h" 603cd6615cff36ec7020692d72c0d6de7c4859cb "fix_asn1.data/RRC.rel10/SystemInformation-r8-IEs.h.diff"
+)
+
+X2AP_Rel11_2=(
+ "X2ap-CriticalityDiagnostics-IE-List.h" ae96308b37fcbcbf39da5012e42968135fc5f27b "fix_asn1.data/X2AP.rel11.2/X2ap-CriticalityDiagnostics-IE-List.h.diff"
+ "NativeInteger.c" 1a55f5402fd363318cf5444ffe1f67530dcf66ff "fix_asn1.data/X2AP.rel11.2/NativeInteger.c.diff"
+ "constr_SET_OF.c" 808cbbdf19b118c0bdb04e3acf2cbe6e4133be2b "fix_asn1.data/X2AP.rel11.2/constr_SET_OF.c.diff"
+)
+
+S1AP_Rel10_5=(
+ "NativeInteger.c" 1a55f5402fd363318cf5444ffe1f67530dcf66ff "fix_asn1.data/S1AP.rel10.5/NativeInteger.c.diff"
+ "constr_SET_OF.c" 808cbbdf19b118c0bdb04e3acf2cbe6e4133be2b "fix_asn1.data/S1AP.rel10.5/constr_SET_OF.c.diff"
+)
+
+red_color="$(tput setaf 1)"
+green_color="$(tput setaf 2)"
+reset_color="$(tput sgr0)"
+
+function error()
+{
+ echo -e "$red_color"ERROR: "$@""$reset_color"
+ exit 1
+}
+
+function check_sha1()
+{
+ local file="$1"
+ local target_sha1="$2"
+
+ if [ ! -f "$file" ]
+ then
+ error "$file: no such file"
+ fi
+
+ # we don't use the line 4 of the file
+ # it contains the location of the ASN1 grammar
+ # and this location is not the same on every
+ # installation (this is for *.h files, for *.c
+ # files it's no big deal to skip that line)
+ local computed_sha1=$(sed 4d "$file" | sha1sum | cut -f 1 -d ' ')
+
+ if [ "$target_sha1" != "$computed_sha1" ]
+ then
+ error "$file: wrong SHA1"
+ fi
+}
+
+function patch_file()
+{
+ local patch="$1"
+ local file="$2"
+
+ echo -e "$green_color""patch file $file with $OPENAIR_DIR/cmake_targets/tools/$patch""$reset_color"
+
+ patch "$file" "$OPENAIR_DIR/cmake_targets/tools/$patch"
+ if [ $? -ne 0 ]
+ then
+ error "patching of $file with $OPENAIR_DIR/cmake_targets/tools/$patch failed"
+ fi
+}
+
+function apply_patches()
+{
+ local directory="$1"
+ local array=$2
+ local len=$3 # the length could be computed locally but the way to do it is not clear to me [CROUX]
+
+ local i
+ local file
+ local sha1
+ local patch
+ local item
+
+ for (( i = 0; i < $len; i += 3 ))
+ do
+ # special bash syntax to access the array
+ item=$array[$i]; file=${!item}
+ item=$array[$((i+1))]; sha1=${!item}
+ item=$array[$((i+2))]; patch=${!item}
+ check_sha1 "$directory/$file" "$sha1"
+ patch_file "$patch" "$directory/$file"
+ done
+}
+
+function patch_rrc()
+{
+ local directory="$1"
+ local version="$2"
+
+ case "$version" in
+ Rel10 )
+ echo "patching RRC files release 10"
+ apply_patches "$directory" RRC_Rel10 ${#RRC_Rel10[*]}
+ ;;
+ Rel8 )
+ echo "patching RRC files release 8 TODO?"
+ ;;
+ * )
+ error unknwon/unhandled RRC version \'"$version"\'
+ ;;
+ esac
+}
+
+function patch_x2ap()
+{
+ local directory="$1"
+ local version="$2"
+
+ case "$version" in
+ R11 )
+ echo "patching X2AP files release 11.2"
+ apply_patches "$directory" X2AP_Rel11_2 ${#X2AP_Rel11_2[*]}
+ ;;
+ * )
+ error unknwon/unhandled X2AP version \'"$version"\'
+ ;;
+ esac
+}
+
+function patch_s1ap()
+{
+ local directory="$1"
+ local version="$2"
+
+ case "$version" in
+ R10 )
+ echo "patching S1AP files release 10.5"
+ apply_patches "$directory" S1AP_Rel10_5 ${#S1AP_Rel10_5[*]}
+ ;;
+ * )
+ error unknwon/unhandled S1AP version \'"$version"\'
+ ;;
+ esac
+}
+
+function main()
+{
+ if [ $# -ne 3 ]
+ then
+ echo "ERROR: pass