diff --git a/cmake_targets/autotests/patches/CmakeLists.patch b/cmake_targets/autotests/patches/CmakeLists.patch deleted file mode 100644 index 1e54e3a0f3..0000000000 --- a/cmake_targets/autotests/patches/CmakeLists.patch +++ /dev/null @@ -1,12 +0,0 @@ -diff --git a/cmake_targets/CMakeLists.txt b/cmake_targets/CMakeLists.txt -index 07d92a1..b6a02d1 100644 ---- a/cmake_targets/CMakeLists.txt -+++ b/cmake_targets/CMakeLists.txt -@@ -235,6 +235,7 @@ add_boolean_option(DEBUG_OMG False "???") - add_boolean_option(XFORMS False "This adds the possibility to see the signal oscilloscope") - add_boolean_option(PRINT_STATS False "This adds the possibility to see the status") - add_boolean_option(T_TRACER False "Activate the T tracer, a debugging/monitoring framework" ) -+add_boolean_option(UE_AUTOTEST_TRACE False "Activate UE autotest specific logs") - - add_boolean_option(DEBUG_CONSOLE False "makes debugging easier, disables stdout/stderr buffering") - diff --git a/cmake_targets/autotests/patches/autotest_ue_cell_synch_event.patch b/cmake_targets/autotests/patches/autotest_ue_cell_synch_event.patch deleted file mode 100644 index 766b724c6c..0000000000 --- a/cmake_targets/autotests/patches/autotest_ue_cell_synch_event.patch +++ /dev/null @@ -1,20 +0,0 @@ -diff --git a/openair1/PHY/LTE_TRANSPORT/initial_sync.c b/openair1/PHY/LTE_TRANSPORT/initial_sync.c -index 663978e..b77cb1b 100644 ---- a/openair1/PHY/LTE_TRANSPORT/initial_sync.c -+++ b/openair1/PHY/LTE_TRANSPORT/initial_sync.c -@@ -476,6 +476,15 @@ int initial_sync(PHY_VARS_UE *ue, runmode_t mode) - //#endif - - if (ue->UE_scan_carrier == 0) { -+ -+ #if UE_AUTOTEST_TRACE -+ LOG_I(PHY,"[UE %d] AUTOTEST Cell Sync : frame = %d, rx_offset %d, freq_offset %d \n", -+ ue->Mod_id, -+ ue->proc.proc_rxtx[0].frame_rx, -+ ue->rx_offset, -+ ue->common_vars.freq_offset ); -+ #endif -+ - if (ue->mac_enabled==1) { - LOG_I(PHY,"[UE%d] Sending synch status to higher layers\n",ue->Mod_id); - //mac_resynch(); diff --git a/cmake_targets/autotests/patches/autotest_ue_dlsch_bitrate_metric.patch b/cmake_targets/autotests/patches/autotest_ue_dlsch_bitrate_metric.patch deleted file mode 100644 index 74139109f2..0000000000 --- a/cmake_targets/autotests/patches/autotest_ue_dlsch_bitrate_metric.patch +++ /dev/null @@ -1,18 +0,0 @@ -diff --git a/openair1/SCHED/phy_procedures_lte_ue.c b/openair1/SCHED/phy_procedures_lte_ue.c -index 5dc629b..353a049 100644 ---- a/openair1/SCHED/phy_procedures_lte_ue.c -+++ b/openair1/SCHED/phy_procedures_lte_ue.c -@@ -3551,6 +3551,13 @@ int phy_procedures_UE_RX(PHY_VARS_UE *ue,UE_rxtx_proc_t *proc,uint8_t eNB_id,uin - LOG_D(PHY,"[UE %d] Calculating bitrate Frame %d: total_TBS = %d, total_TBS_last = %d, bitrate %f kbits\n", - ue->Mod_id,frame_rx,ue->total_TBS[eNB_id], - ue->total_TBS_last[eNB_id],(float) ue->bitrate[eNB_id]/1000.0); -+ -+ #if UE_AUTOTEST_TRACE -+ if ((frame_rx % 100 == 0)) { -+ LOG_I(PHY,"[UE %d] AUTOTEST Metric : UE_DLSCH_BITRATE = %5.2f kbps (frame = %d) \n", ue->Mod_id, (float) ue->bitrate[eNB_id]/1000.0, frame_rx); -+ } -+ #endif -+ - } - - diff --git a/cmake_targets/autotests/patches/autotest_ue_offsets_metric.patch b/cmake_targets/autotests/patches/autotest_ue_offsets_metric.patch deleted file mode 100644 index 85afe8703e..0000000000 --- a/cmake_targets/autotests/patches/autotest_ue_offsets_metric.patch +++ /dev/null @@ -1,27 +0,0 @@ -diff --git a/openair1/SCHED/phy_procedures_lte_ue.c b/openair1/SCHED/phy_procedures_lte_ue.c -index 5dc629b..4d31ad3 100644 ---- a/openair1/SCHED/phy_procedures_lte_ue.c -+++ b/openair1/SCHED/phy_procedures_lte_ue.c -@@ -3347,6 +3347,22 @@ int phy_procedures_UE_RX(PHY_VARS_UE *ue,UE_rxtx_proc_t *proc,uint8_t eNB_id,uin - - // first slot has been processed (FFTs + Channel Estimation, PCFICH/PHICH/PDCCH) - -+ #if UE_AUTOTEST_TRACE -+ if ( (frame_rx % 10 == 0) && (subframe_rx == 0)) { -+ printf("AUTOTEST Metric : UE_FREQ_OFFSET = %d Hz (frame = %d) \n", ue->common_vars.freq_offset, frame_rx); -+ printf("AUTOTEST Metric : UE_RX_OFFSET = %d (frame = %d) \n", ue->rx_offset, frame_rx); -+ -+ printf("AUTOTEST Metric : RRC Measurments RSRP[0] %.2f dBm/RE, RSSI %.2f dBm, RSRQ[0] %.2f dB, N0 %d dBm/RE, NF %.1f dB (frame = %d)\n", -+ 10*log10(ue->measurements.rsrp[0])-ue->rx_total_gain_dB, -+ 10*log10(ue->measurements.rssi)-ue->rx_total_gain_dB, -+ 10*log10(ue->measurements.rsrq[0]), -+ ue->measurements.n0_power_tot_dBm, -+ (double)ue->measurements.n0_power_tot_dBm+132.24, -+ frame_rx); -+ } -+ #endif -+ -+ - // do procedures for C-RNTI - if (ue->dlsch[eNB_id][0]->active == 1) { - VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_PDSCH_PROC, VCD_FUNCTION_IN); diff --git a/cmake_targets/autotests/patches/build_oai.patch b/cmake_targets/autotests/patches/build_oai.patch deleted file mode 100644 index cf93b466e7..0000000000 --- a/cmake_targets/autotests/patches/build_oai.patch +++ /dev/null @@ -1,40 +0,0 @@ -diff --git a/cmake_targets/build_oai b/cmake_targets/build_oai -index 25e9a1c..0b04bb7 100755 ---- a/cmake_targets/build_oai -+++ b/cmake_targets/build_oai -@@ -54,6 +54,7 @@ BUILD_DOXYGEN=0 - T_TRACER="False" - DISABLE_HARDWARE_DEPENDENCY="False" - CMAKE_BUILD_TYPE="" -+UE_AUTOTEST_TRACE="False" - trap handle_ctrl_c INT - - function print_help() { -@@ -130,6 +131,8 @@ Options - Enables the T tracer. - --disable-hardware-dependency - Disable HW dependency during installation -+--ue-autotest-trace -+ Enable specific traces for UE autotest framework - Usage (first build): - oaisim (eNB + UE): ./build_oai -I --oaisim -x --install-system-files - Eurecom EXMIMO + COTS UE : ./build_oai -I --eNB -x --install-system-files -@@ -285,6 +288,10 @@ function main() { - echo_info "Disabling hardware dependency for compiling software" - DISABLE_HARDWARE_DEPENDENCY="True" - shift 1;; -+ --ue-autotest-trace) -+ UE_AUTOTEST_TRACE="True" -+ echo_info "Enabling autotest specific trace for UE" -+ shift 1;; - -h | --help) - print_help - exit 1;; -@@ -457,6 +464,7 @@ function main() { - echo "set (DEADLINE_SCHEDULER \"${DEADLINE_SCHEDULER_FLAG_USER}\" )" >>$cmake_file - echo "set (CPU_AFFINITY \"${CPU_AFFINITY_FLAG_USER}\" )" >>$cmake_file - echo "set ( T_TRACER $T_TRACER )" >> $cmake_file -+ echo "set (UE_AUTOTEST_TRACE $UE_AUTOTEST_TRACE)" >> $cmake_file - echo 'include(${CMAKE_CURRENT_SOURCE_DIR}/../CMakeLists.txt)' >> $cmake_file - cd $DIR/$lte_build_dir/build - cmake .. diff --git a/cmake_targets/autotests/run_lte-softmodem-nos1_tests.py b/cmake_targets/autotests/run_lte-softmodem-nos1_tests.py deleted file mode 100755 index 2ece62ae16..0000000000 --- a/cmake_targets/autotests/run_lte-softmodem-nos1_tests.py +++ /dev/null @@ -1,2595 +0,0 @@ -#! /usr/bin/python -#/* -# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more -# * contributor license agreements. See the NOTICE file distributed with -# * this work for additional information regarding copyright ownership. -# * The OpenAirInterface Software Alliance licenses this file to You under -# * the OAI Public License, Version 1.0 (the "License"); you may not use this file -# * except in compliance with the License. -# * You may obtain a copy of the License at -# * -# * http://www.openairinterface.org/?page_id=698 -# * -# * Unless required by applicable law or agreed to in writing, software -# * distributed under the License is distributed on an "AS IS" BASIS, -# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# * See the License for the specific language governing permissions and -# * limitations under the License. -# *------------------------------------------------------------------------------- -# * For more information about the OpenAirInterface (OAI) Software Alliance: -# * contact@openairinterface.org -# */ - -# \author Rohit Gupta - Benoit ROBERT (benoit.robert@syrtem.com) -# \version 0.1 -# @ingroup _test - -# \Changelog -# 2016-11-18 : -# - Add progess bar during test execution update_progress() - -import tempfile -import threading -import sys -import traceback -import wave -import os -import time -import datetime -import getpass -import math #from time import clock -import xml.etree.ElementTree as ET -import re - -#from dict2xml import dict2xml as xmlify - -from colorama import Fore, Back, Style - -import numpy as np - -import log - -from openair import * - -import paramiko - -import subprocess -import commands -sys.path.append('/opt/ssh') -sys.path.append(os.path.expandvars('$OPENAIR_DIR/cmake_targets/autotests/tools/')) - -from lib_autotest import * -import ssh -from ssh import SSHSession -import argparse - - -# update_progress() : Displays or updates a console progress bar -## Accepts a float between 0 and 1. Any int will be converted to a float. -## A value under 0 represents a 'halt'. -## A value at 1 or bigger represents 100% -def update_progress(progress, prefix_string): - barLength = 20 # Modify this to change the length of the progress bar - status = "" - #print "progress = "+ str(progress) - if isinstance(progress, int): - progress = float(progress) - if not isinstance(progress, float): - progress = 0 - status = "error: progress var must be float\r\n" - if progress < 0: - progress = 0 - status = "Halt...\r\n" - if progress >= 1: - progress = 1 - status = "Done...\r\n" - block = int(round(barLength*progress)) - text = "\r"+prefix_string+" [{0}] {1}% {2}".format( "="*block + " "*(barLength-block), progress*100, status) - sys.stdout.write(text) - sys.stdout.flush() - - -def exit_prog(exit_val): - print(Style.RESET_ALL), - sys.exit(exit_val) - -# \brief write a string to a file -# \param filename name of file -# \param string string to write -# \mode file opening mode (default=write) -def write_file(filename, string, mode="w"): - text_file = open(filename, mode) - text_file.write(string) - text_file.close() - -# \brief function to check if test case passed throughput test -# \param filename name of file which has throughput results (usually from iperf -s ... -# \param min_tput minimum throughput -# \param max_tuput maximum throughput -# \param average average throughput -# \param min_duration minimum duration of throughput -#The throughput values found in file must be higher than values from from arguments 2,3,4,5 -#The function returns True if throughput conditions are saisfied else it returns fails -def tput_test(filename, min_tput, max_tput, average, min_duration): - - if os.path.exists(filename): - with open (filename, "r") as myfile: - data=myfile.read() - p=re.compile('(\d*.\d*) Mbits/sec') - array=p.findall(data) - array = [ float(x) for x in array ] - duration = array.__len__() - if duration !=0: - min_list = min(array) - max_list = max(array) - average_list = np.mean(array) - else: - min_list = 0 - max_list = 0 - average_list=0 - tput_string=' ( '+ "min=%0.2f" % min_list + ' Mbps / ' + "max=%0.2f" % max_list + ' Mbps / ' + "avg=%0.2f" % average_list + ' Mbps / ' + "dur=%0.2f" % duration + ' s) ' - if (min_list >= min_tput and max_list >= max_tput and average_list >= average and duration >= min_duration): - return True , tput_string - else: - return False , tput_string - else: - return False , tput_string - -# \brief Convert string to float or return None if there is exception -def try_convert_to_float(string, fail=None): - try: - return float(string) - except Exception: - return fail; - -# \brief get throughput statistics from log file -# \param search_expr search expression found in test_case_list.xml file -# \param logfile_traffic logfile which has traffic statistics -def tput_test_search_expr (search_expr, logfile_traffic): - result=0 - tput_string='' - if search_expr !='': - if search_expr.find('throughput_test')!= -1 : - p= re.compile('min\s*=\s*(\d*.\d*)\s*Mbits/sec') - min_tput=p.findall(search_expr) - if min_tput.__len__()==1: - min_tput = min_tput[0] - else: - min_tput = None - - p= re.compile('max\s*=\s*(\d*.\d*)\s*Mbits/sec') - max_tput=p.findall(search_expr) - if max_tput.__len__()==1: - max_tput = max_tput[0] - else: - max_tput = None - - p= re.compile('average\s*=\s*(\d*.\d*)\s*Mbits/sec') - avg_tput=p.findall(search_expr) - if avg_tput.__len__()==1: - avg_tput=avg_tput[0] - else: - avg_tput = None - - p= re.compile('duration\s*=\s*(\d*.\d*)\s*s') - duration=p.findall(search_expr) - if duration.__len__()==1: - duration = duration[0] - else: - duration = None - - min_tput = try_convert_to_float(min_tput) - max_tput = try_convert_to_float(max_tput) - avg_tput = try_convert_to_float(avg_tput) - duration = try_convert_to_float(duration) - - if (min_tput != None and max_tput != None and avg_tput != None and duration != None ): - result, tput_string = tput_test(logfile_traffic, min_tput, max_tput, avg_tput, duration) - else: - result=1 - - return result, tput_string - -# \brief function to copy files to/from remote machine -# \param username user with which to make sftp connection -# \param password password of user -# \param hostname host to connect -# \ports port of remote machine on which server is listening -# \paramList This is list of operations as a set {operation: "get/put", localfile: "filename", remotefile: "filename" -# \param logfile Ignored currently and set once at the beginning of program -def sftp_module (username, password, hostname, ports, paramList,logfile): - #localD = localfile - #remoteD = remotefile - #fd, paramiko_logfile = tempfile.mkstemp() - #res = os.close(fd ) - #paramiko logfile path should not be changed with multiple calls. The logs seem to in first file regardless - error = "" - #The lines below are outside exception loop to be sure to terminate the test case if the network connectivity goes down or there is authentication failure - transport = paramiko.Transport((hostname, ports)) - transport.connect(username = username, password = password) - sftp = paramiko.SFTPClient.from_transport(transport) - # index =0 - for param in paramList: - try: - operation = param["operation"] - localD = param["localfile"] - remoteD = param["remotefile"] - if operation == "put": - sftp.put(remotepath=remoteD, localpath=localD) - elif operation == "get": - sftp.get(remotepath=remoteD, localpath=localD) - else : - print "sftp_module: unidentified operation:<" + operation + "> Exiting now" - print "hostname = " + hostname - print "ports = " + ports - print "localfile = " + localD - print "remotefile = " + remoteD - print "operation = " + operation - sys.exit() - except Exception, e: - error = error + ' In function: ' + sys._getframe().f_code.co_name + ': *** Caught exception: ' + str(e.__class__) + " : " + str( e) - error = error + '\n username = ' + username + '\n hostname = ' + hostname + '\n localfile = ' + localD + '\n remotefile = ' + remoteD + '\n operation = ' + operation + '\nlogfile = ' + logfile + '\n ports = ' + str(ports) + '\n' - error = error + traceback.format_exc() - print error - - sftp.close() - transport.close() - res = os.system('\n echo \'SFTP Module Log for Machine: <' + hostname + '> starts...\' >> ' + logfile + ' 2>&1 ') - res = os.system('cat ' + paramiko_logfile + ' >> ' + logfile + ' 2>&1 \n') - write_file(logfile, error, "a") - res = os.system('\n echo \'SFTP Module Log for Machine: <' + hostname + '> ends...\' >> ' + logfile + ' 2>&1 \n') - -# \brief bash script stub put at the end of scripts to terminate it -# \param timeout_cmd terminate script after timeout_cmd seconds -# \param terminate_missing_procs if True terminate all the processes launched by script if one of them terminates prematurely (due to error) -def finalize_deploy_script (timeout_cmd, terminate_missing_procs='False'): - cmd = 'declare -i timeout_cmd='+str(timeout_cmd) + '\n' - if terminate_missing_procs == 'True': - cmd = cmd + """ - #The code below checks if one the processes launched in background has crashed. - #If it does, then the code below terminates all the child processes created by this script - declare -i wakeup_interval=1 - declare -i step=0 - echo \"Array pid = ${array_exec_pid[@]}\" - while [ "$step" -lt "$timeout_cmd" ] - do - declare -i break_while_loop=0 - #Iterate over each process ID in array_exec_pid - for i in "${array_exec_pid[@]}" - do - numchild=`pstree -p $i | perl -ne 's/\((\d+)\)/print " $1"/ge' |wc -w` - echo "PID = $i, numchild = $numchild" - if [ "$numchild" -eq "0" ] ; then - echo "Process ID $i has finished unexpectedly. Now preparing to kill all the processes " - break_while_loop=1 - break - fi - done - if [ "$break_while_loop" -eq "1" ] ; then - break - fi - step=$(( step + wakeup_interval )) - sleep $wakeup_interval - done - echo "Final time step (Duration of test case) = $step " - date - """ - else: - #We do not terminate the script if one of the processes has existed prematurely - cmd = cmd + 'sleep ' + str(timeout_cmd) + ' ; date \n' - - return cmd - -# \brief run python script and update config file params of test case -# \param oai module with already open connection -# \param config_string config string taken from xml file -# \param logdirRepo directory of remote repository -# \param python_script python script location -def update_config_file(oai, config_string, logdirRepo, python_script): - cmd="" - if config_string : - stringArray = config_string.splitlines() - #python_script = '$OPENAIR_DIR/targets/autotests/tools/search_repl.py' - for string in stringArray: - #split the string based on space now - string1=string.split() - cmd = cmd + 'python ' + python_script + ' ' + logdirRepo+'/'+string1[0] + ' ' + string1[1] + ' '+ string1[2] + '\n' - #cmd = cmd + 'perl -p -i -e \'s/'+ string1[1] + '\\s*=\\s*"\\S*"\\s*/' + string1[1] + ' = "' + string1[2] +'"' + '/g\' ' + logdirRepo + '/' +string1[0] + '\n' - return cmd - #result = oai.send_recv(cmd) - -# \brief thread safe sshsession wrapper due to occasional connection issues with ssh -# \param machine name of machine -# \param username user login for remote machine -# \param key_file file name which has keys to enable passwordless login -# \param password password for remote machine -# \param logdir_remote remote directory -# \param logdir_local_base local directory -# \param operation operation to perform (get_all, put_all) transfers recursively for directories -def SSHSessionWrapper(machine, username, key_file, password, logdir_remote, logdir_local_base, operation): - max_tries = 10 - i=0 - while i <= max_tries: - i = i +1 - try: - ssh = SSHSession(machine , username, key_file, password) - if operation == "get_all": - ssh.get_all(logdir_remote , logdir_local_base) - elif operation == "put_all": - ssh.put_all(logdir_local_base, logdir_remote ) - else: - print "Error: Uknown operation in SSHSessionWrapper. Exiting now..." - sys.exit(1) - break - except Exception, e: - error='' - error = error + ' In Class = function: ' + sys._getframe().f_code.co_name + ': *** Caught exception: ' + str(e.__class__) + " : " + str( e) - error = error + '\n username = ' + username + '\n machine = ' + machine + '\n logdir_remote = ' + logdir_remote + '\n logdir_local_base = ' + logdir_local_base - error = error + traceback.format_exc() - print error - print " Retrying again in 1 seconds" - time.sleep(1) - print "Continuing ..." - if i ==max_tries: - print "Fatal Error: Max no of retries reached. Exiting now..." - sys.exit(1) - - - -# \briefFunction to clean old programs that might be running from earlier execution -# \param oai - parameter for making connection to machine -# \parm programList list of programs that must be terminated before execution of any test case -# \param CleanUpAluLteBox program to terminate AlU Bell Labs LTE Box -# \param ExmimoRfStop String to stop EXMIMO card (specified in test_case_list.xml) -def cleanOldPrograms(oai, programList, CleanUpAluLteBox, ExmimoRfStop, logdir, logdirOAI5GRepo): - cmd = 'killall -9 ' + programList - result = oai.send(cmd, True) -# print "\t\t > "+cmd -# print "\t\t < "+result - -# print "Killing old programs on ..." + result - programArray = programList.split() - programListJoin = '|'.join(programArray) - cmd = " ( date ;echo \"Starting cleaning old programs.. \" ; dmesg|tail ; echo \"Current disk space.. \" ; df -h )>& " + logdir + "/oai_test_setup_cleanup.log.`hostname` 2>&1 ; sync" - result=oai.send_recv(cmd) -# print "\t\t > "+cmd -# print "\t\t < "+result - - cmd = cleanupOldProgramsScript + ' ' + '\''+programListJoin+'\'' - #result = oai.send_recv(cmd) - #print result - result = oai.send_expect_false(cmd, 'Match found', False) -# print "\t\t > "+cmd -# print "\t\t < "+result - -# print "Looking for old programs..." + result - res=oai.send_recv(CleanUpAluLteBox, True) -# print "\t\t > "+CleanUpAluLteBox -# print "\t\t < "+res - cmd= " echo \"Starting EXmimoRF Stop... \" >> " + logdir + "/oai_test_setup_cleanup.log.`hostname` 2>&1 ; sync "; - result = oai.send_recv(cmd) -# print "\t\t > "+cmd -# print "\t\t < "+result - cmd = "( " + "cd " + logdirOAI5GRepo + " ; source oaienv ; " + ExmimoRfStop + " ) >> " + logdir + "/oai_test_setup_cleanup.log.`hostname` 2>&1 ; sync " -# print "cleanoldprograms cmd = " + cmd - res=oai.send_recv(cmd, False, timeout=600) -# print "\t\t > "+cmd -# print "\t\t < "+res - - cmd= " echo \"Stopping EXmimoRF Stop... \" >> " + logdir + "/oai_test_setup_cleanup.log.`hostname` 2>&1 ; sync "; - result = oai.send_recv(cmd) -# print "\t\t > "+cmd -# print "\t\t < "+result - - #res = oai.send_recv(ExmimoRfStop, False) - cmd = " ( date ;echo \"Finished cleaning old programs.. \" ; dmesg | tail)>> $HOME/.oai_test_setup_cleanup.log.`hostname` 2>&1 ; sync" - res=oai.send_recv(cmd) -# print "\t\t > "+cmd -# print "\t\t < "+res - -# \brief Class thread to launch a generic command on remote machine -# \param threadID number of thread (for book keeping) -# \param threadname string of threadname (for book keeping) -# \param machine machine name on which to run the command -# \param username username with which to login -# \param password password with which to login -# \param cmd command as a string to run on remote machine -# \parma sudo if True sudo is set -# \param timeout timeout of command in seconds -class oaiThread (threading.Thread): - def __init__(self, threadID, threadname, machine, username, password, cmd, sudo, timeout): - threading.Thread.__init__(self) - self.threadID = threadID - self.threadname = threadname - self.machine = machine - self.username = username - self.password = password - self.cmd = cmd - self.sudo = sudo - self.timeout = timeout - def run(self): - try: - oai = openair('localdomain',self.machine) - oai.connect(self.username, self.password) - # print "Starting " + self.threadname + " on machine " + self.machine - result = oai.send_recv(self.cmd, self.sudo, self.timeout) - #print "result = " + result - #print "Exiting " + self.threadname - oai.disconnect() - except Exception, e: - error='' - error = error + ' In class oaiThread, function: ' + sys._getframe().f_code.co_name + ': *** Caught exception: ' + str(e.__class__) + " : " + str( e) - error = error + '\n threadID = ' + str(self.threadID) + '\n threadname = ' + self.threadname + '\n timeout = ' + str(self.timeout) + '\n machine = ' + self.machine + '\n cmd = ' + self.cmd + '\n timeout = ' + str(self.timeout) + '\n username = ' + self.username + '\n' - error = error + traceback.format_exc() - print error - - -# \brief This class runs test cases with class {execution, compilatation} -# \param threadID number of thread (for book keeping) -# \param name string of threadname (for book keeping) -# \param machine machine name on which to run the command -# \param logdirOAI5GRepo directory on remote machine which as openairinterface5g repo installed -# \param testcasename name of test case to run on remote machine -# \param CleanupAluLteBox string that contains commands to stop ALU Bell Labs LTEBox (specified in test_case_list.xml) -# \param user username with which to login -# \param password password with which to login -# \param timeout timeout of command in seconds -# \param ExmimoRfStop command to stop EXMIMO Card -class testCaseThread_generic (threading.Thread): - def __init__(self, threadID, name, machine, logdirOAI5GRepo, testcasename,oldprogramList, CleanupAluLteBox, user, password, timeout, ExmimoRfStop): - threading.Thread.__init__(self) - self.threadID = threadID - self.name = name - self.testcasename = testcasename - self.timeout = timeout - self.machine = machine - self.logdirOAI5GRepo = logdirOAI5GRepo - self.oldprogramList = oldprogramList - self.CleanupAluLteBox = CleanupAluLteBox - self.password=password - self.ExmimoRfStop = ExmimoRfStop - self.user = user - def run(self): - try: - mypassword='' - #addsudo = 'echo \'' + mypassword + '\' | sudo -S -E ' - addpass = 'echo \'' + mypassword + '\' | ' - #user = getpass.getuser() - print "Starting test case : " + self.testcasename + " On machine " + self.machine + " timeout = " + str(self.timeout) - oai = openair('localdomain',self.machine) - oai.connect(self.user, self.password) - #cleanOldPrograms(oai, self.oldprogramList, self.CleanupAluLteBox, self.ExmimoRfStop) - logdir_local = os.environ.get('OPENAIR_DIR') - logdir_local_testcase = logdir_local +'/cmake_targets/autotests/log/'+ self.testcasename - logdir_local_base = logdir_local +'/cmake_targets/autotests/log/' - logdir_remote_testcase = self.logdirOAI5GRepo + '/cmake_targets/autotests/log/' + self.testcasename - logdir_remote = self.logdirOAI5GRepo + '/cmake_targets/autotests/log/' - logfile_task_testcasename = logdir_local_testcase + '/test_task' + '_' + self.testcasename + '_.log' - logfile_task_testcasename_out = logdir_remote + '/test_task_out' + '_' + self.testcasename + '_.log' - #print "logdir_local_testcase = " + logdir_local_testcase - #print "logdir_remote_testcase = " + logdir_remote_testcase - #if os.path.exists(logdir_local_testcase) == True : - # os.removedirs(logdir_local_testcase) - #os.mkdir(logdir_local_testcase) - os.system("rm -fr " + logdir_local_testcase ) - os.system("mkdir -p " + logdir_local_testcase) - cmd = "mkdir -p " + logdir_remote_testcase - res = oai.send_recv(cmd, False, self.timeout) - #print "res = " + res - - cmd = "( cd " + self.logdirOAI5GRepo + " \n " - cmd = cmd + "source oaienv \n" - cmd = cmd + "$OPENAIR_DIR/cmake_targets/autotests/run_exec_autotests.bash --run-group \"" + self.testcasename + "\" -p \'\'" - cmd = cmd + " ) >& " + logfile_task_testcasename_out + " ; " + "mkdir -p " + logdir_remote_testcase + "; mv " + logfile_task_testcasename_out + " " +logdir_remote_testcase - - #print "cmd = " + cmd - res = oai.send_recv(cmd, False, self.timeout) - #print "res = " + res - #print "ThreadID = " + str(self.threadID) + "ThreadName: " + self.name + " testcasename: " + self.testcasename + "Execution Result = " + res - write_file(logfile_task_testcasename, cmd, mode="w") - #Now we copy all the remote files - #ssh = SSHSession(self.machine , username=user, key_file=None, password=self.password) - #ssh.get_all(logdir_remote_testcase , logdir_local_base) - SSHSessionWrapper(self.machine, self.user, None, self.password, logdir_remote_testcase, logdir_local_base, "get_all") - print "Finishing test case : " + self.testcasename + " On machine " + self.machine - #cleanOldPrograms(oai, self.oldprogramList, self.CleanupAluLteBox, self.ExmimoRfStop) - #oai.kill(user,mypassword) - oai.disconnect() - except Exception, e: - error='' - error = error + ' In Class = testCaseThread_generic, function: ' + sys._getframe().f_code.co_name + ': *** Caught exception: ' + str(e.__class__) + " : " + str( e) - error = error + '\n threadID = ' + str(self.threadID) + '\n threadName = ' + self.name + '\n testcasename = ' + self.testcasename + '\n machine = ' + self.machine + '\n logdirOAI5GRepo = ' + self.logdirOAI5GRepo + '\n' + '\n timeout = ' + str(self.timeout) + '\n user = ' + self.user - error = error + traceback.format_exc() - print error - print "Continuing with next test case..." - #sys.exit() - - - -# \bried function to run a command as a sudo -# \param cmd command as a string -# \param password password to be supplied -def addsudo (cmd, password=""): - cmd = 'echo \'' + password + '\' | sudo -S -E bash -c \' ' + cmd + '\' ' - return cmd - -# \brief handler for executing test cases (compilation, execution) -# \param name of testcase -# \param threadListGeneric list of threads which are already running on remote machines -# \param oldprogramList list of programs which must be terminated before running a test case -# \param logdirOAI5GRepo directory on remote machine which as openairinterface5g repo installed -# \param MachineList list of all machines on which generic test cases can be run -# \param user username with which to login -# \param password password with which to login -# \param CleanupAluLteBox string that contains commands to stop ALU Bell Labs LTEBox (specified in test_case_list.xml) -# \param timeout timeout of command in seconds -# \param ExmimoRfStop command to stop EXMIMO Card -def handle_testcaseclass_generic (testcasename, threadListGeneric, oldprogramList, logdirOAI5GRepo, MachineList, user, password, CleanupAluLteBox,timeout, ExmimoRfStop): - try: - mypassword=password - MachineListFree=[] - threadListNew=[] - while MachineListFree.__len__() == 0 : - MachineListBusy=[] - MachineListFree=[] - threadListNew=[] - #first we need to find the list of free machines that we could run our test case - if threadListGeneric.__len__() ==0 : - #This means no thread is started yet - MachineListFree = MachineList[:] - else : - for param in threadListGeneric : - thread_id = param["thread_id"] - machine = param["Machine"] - testcasenameold = param["testcasename"] - thread_id.join(1) - if thread_id.isAlive() == True: - threadListNew.append(param) - print "thread_id is alive: testcasename: " + testcasenameold + " on machine "+ machine - if machine not in MachineListBusy: - MachineListBusy.append(machine) - else : - print "thread_id is finished: testcasename: " + testcasenameold + " on machine " + machine - #threadListGeneric.remove(param) - #if machine not in MachineListFree: - # MachineListFree.append(machine) - #Now we check if there is at least one free machine - MachineListFree = MachineList[:] - for machine in MachineListBusy: - if machine in MachineListFree: - MachineListFree.remove(machine) - print "MachineListFree = " + ','.join(MachineListFree) - print "MachineListBusy = " + ','.join(MachineListBusy) - print "MachineList = " + ','.join(MachineList) - machine = MachineListFree[0] - thread = testCaseThread_generic(1,"Generic Thread_"+testcasename+"_"+ "machine_", machine, logdirOAI5GRepo, testcasename, oldprogramList, CleanupAluLteBox, user, password, timeout, ExmimoRfStop) - param={"thread_id":thread, "Machine":machine, "testcasename":testcasename} - thread.start() - threadListNew.append(param) - return threadListNew - except Exception, e: - error='' - error = error + ' In function: ' + sys._getframe().f_code.co_name + ': *** Caught exception: ' + str(e.__class__) + " : " + str( e) - error = error + '\n testcasename = ' + testcasename + '\n logdirOAI5GRepo = ' + logdirOAI5GRepo + '\n MachineList = ' + ','.join(MachineList) + '\n timeout = ' + str(timeout) + '\n' + 'user = ' + user - error = error + traceback.format_exc() - print error - print "Continuing..." - #sys.exit(1) - -# \brief Blocking wait for all threads related to generic testcase execution, class (compilation and execution) -# \param threadListGeneric list of threads which are running on remote machines -# \param timeout time to wait on threads in seconds -def wait_testcaseclass_generic_threads(threadListGeneric, timeout = 1): - threadListGenericNew=[] - for param in threadListGeneric: - thread_id = param["thread_id"] - machine = param["Machine"] - testcasenameold = param["testcasename"] - thread_id.join(timeout) - if thread_id.isAlive() == True: - threadListGenericNew.append(param) - print "thread_id on machine: " + machine + " is still alive: testcasename: " + testcasenameold - print " Exiting now..." - sys.exit(1) - else: - print "thread_id on machine: " + machine + " is stopped: testcasename: " + testcasenameold - #threadListGeneric.remove(param) - return threadListGenericNew - - -# \brief handler for executing test cases (lte-softmodem) -# \param testcase name of testcase -# \param oldprogramList list of programs which must be terminated before running a test case -# \param logdirOAI5GRepo directory on remote machine which has openairinterface5g repo installed -# \param logdirOpenaircnRepo directory on remote machine which has openair-cn repo installed -# \param MachineList list of all machines on which test cases can be run -# \param user username with which to login -# \param password password with which to login -# \param CleanupAluLteBox string that contains commands to stop ALU Bell Labs LTEBox (specified in test_case_list.xml) -# \param ExmimoRfStop command to stop EXMIMO Card -# \param nruns_lte-softmodem global parameter to override number of runs (nruns) within the test case -def handle_testcaseclass_softmodem (testcase, oldprogramList, logdirOAI5GRepo , logdirOpenaircnRepo, MachineList, user, password, CleanUpAluLteBox, ExmimoRfStop, nruns_lte_softmodem, timeout_cmd): - #We ignore the password sent to this function for secuirity reasons for password present in log files - #It is recommended to add a line in /etc/sudoers that looks something like below. The line below will run sudo without password prompt - # your_user_name ALL=(ALL:ALL) NOPASSWD: ALL - mypassword='' - #addsudo = 'echo \'' + mypassword + '\' | sudo -S -E ' - addpass = 'echo \'' + mypassword + '\' | ' - #user = getpass.getuser() - testcasename = testcase.get('id') - testcaseclass = testcase.findtext('class',default='') - if timeout_cmd == '': - timeout_cmd = testcase.findtext('TimeOut_cmd',default='') - timeout_cmd = int(float(timeout_cmd)) - #Timeout_thread is more than that of cmd to have room for compilation time, etc - timeout_thread = timeout_cmd + 300 - if nruns_lte_softmodem == '': - nruns = testcase.findtext('nruns',default='') - else: - nruns = nruns_lte_softmodem - nruns = int(float(nruns)) - tags = testcase.findtext('tags',default='') - - RRHMachine = testcase.findtext('RRH',default='') - RRH_compile_prog = testcase.findtext('RRH_compile_prog',default='') - RRH_compile_prog_args = testcase.findtext('RRH_compile_prog_args',default='') - RRH_pre_exec = testcase.findtext('RRH_pre_exec',default='') - RRH_pre_exec_args = testcase.findtext('RRH_pre_exec_args',default='') - RRH_main_exec = testcase.findtext('RRH_main_exec',default='') - RRH_main_exec_args = testcase.findtext('RRH_main_exec_args',default='') - RRH_terminate_missing_procs = testcase.findtext('RRH_terminate_missing_procs',default='False') - - - eNBMachine = testcase.findtext('eNB',default='') - eNB_config_file = testcase.findtext('eNB_config_file',default='') - eNB_compile_prog = testcase.findtext('eNB_compile_prog',default='') - eNB_compile_prog_args = testcase.findtext('eNB_compile_prog_args',default='') - eNB_pre_exec = testcase.findtext('eNB_pre_exec',default='') - eNB_pre_exec_args = testcase.findtext('eNB_pre_exec_args',default='') - eNB_main_exec = testcase.findtext('eNB_main_exec',default='') - eNB_main_exec_args = testcase.findtext('eNB_main_exec_args',default='') - eNB_traffic_exec = testcase.findtext('eNB_traffic_exec',default='') - eNB_traffic_exec_args = testcase.findtext('eNB_traffic_exec_args',default='') - eNB_terminate_missing_procs = testcase.findtext('eNB_terminate_missing_procs',default='False') - eNB_search_expr_true = testcase.findtext('eNB_search_expr_true','') - if re.compile('\w+').match(eNB_search_expr_true) != None: - eNB_search_expr_true = eNB_search_expr_true + ' duration=' + str(timeout_cmd-90) + 's' - - UEMachine = testcase.findtext('UE',default='') - UE_config_file = testcase.findtext('UE_config_file',default='') - UE_compile_prog = testcase.findtext('UE_compile_prog',default='') - UE_compile_prog_args = testcase.findtext('UE_compile_prog_args',default='') - UE_pre_exec = testcase.findtext('UE_pre_exec',default='') - UE_pre_exec_args = testcase.findtext('UE_pre_exec_args',default='') - UE_main_exec = testcase.findtext('UE_main_exec',default='') - UE_main_exec_args = testcase.findtext('UE_main_exec_args',default='') - UE_traffic_exec = testcase.findtext('UE_traffic_exec',default='') - UE_traffic_exec_args = testcase.findtext('UE_traffic_exec_args',default='') - UE_terminate_missing_procs = testcase.findtext('UE_terminate_missing_procs',default='False') - UE_search_expr_true = testcase.findtext('UE_search_expr_true','') - UE_stop_script = testcase.findtext('UE_stop_script','') - if re.compile('\w+').match(UE_search_expr_true) != None: - UE_search_expr_true = UE_search_expr_true + ' duration=' + str(timeout_cmd-90) + 's' - - EPCMachine = testcase.findtext('EPC',default='') - EPC_config_file = testcase.findtext('EPC_config_file',default='') - EPC_compile_prog = testcase.findtext('EPC_compile_prog',default='') - EPC_compile_prog_args = testcase.findtext('EPC_compile_prog_args',default='') - HSS_compile_prog = testcase.findtext('HSS_compile_prog',default='') - HSS_compile_prog_args = testcase.findtext('HSS_compile_prog_args',default='') - - EPC_pre_exec= testcase.findtext('EPC_pre_exec',default='') - EPC_pre_exec_args = testcase.findtext('EPC_pre_exec_args',default='') - EPC_main_exec= testcase.findtext('EPC_main_exec',default='') - EPC_main_exec_args = testcase.findtext('EPC_main_exec_args',default='') - HSS_main_exec= testcase.findtext('HSS_main_exec',default='') - HSS_main_exec_args = testcase.findtext('HSS_main_exec_args',default='') - EPC_traffic_exec = testcase.findtext('EPC_traffic_exec',default='') - EPC_traffic_exec_args = testcase.findtext('EPC_traffic_exec_args',default='') - EPC_terminate_missing_procs = testcase.findtext('EPC_terminate_missing_procs',default='False') - EPC_search_expr_true = testcase.findtext('EPC_search_expr_true','') - if re.compile('\w+').match(EPC_search_expr_true) != None: - EPC_search_expr_true = EPC_search_expr_true + ' duration=' + str(timeout_cmd-90) + 's' - - index_eNBMachine = MachineList.index(eNBMachine) - index_UEMachine = MachineList.index(UEMachine) - index_EPCMachine = MachineList.index(EPCMachine) - cmd = 'cd ' + logdirOAI5GRepo + '; source oaienv ; env|grep OPENAIR' - oai_eNB = openair('localdomain', eNBMachine) - oai_eNB.connect(user, password) - res= oai_eNB.send_recv(cmd) - oai_UE = openair('localdomain', UEMachine) - oai_UE.connect(user, password) - res = oai_eNB.send_recv(cmd) - oai_EPC = openair('localdomain', EPCMachine) - oai_EPC.connect(user, password) - res = oai_eNB.send_recv(cmd) - if RRHMachine != '': - cmd = 'cd ' + logdirOAI5GRepo + '; source oaienv ; env|grep OPENAIR' - index_RRHMachine = MachineList.index(RRHMachine) - oai_RRH = openair('localdomain', RRHMachine) - oai_RRH.connect(user, password) - res= oai_RRH.send_recv(cmd) - #cleanOldPrograms(oai_eNB, oldprogramList, CleanUpAluLteBox, ExmimoRfStop) - #cleanOldPrograms(oai_UE, oldprogramList, CleanUpAluLteBox, ExmimoRfStop) - #cleanOldPrograms(oai_EPC, oldprogramList, CleanUpAluLteBox, ExmimoRfStop) - logdir_local = os.environ.get('OPENAIR_DIR') - if logdir_local is None: - print "Environment variable OPENAIR_DIR not set correctly" - sys.exit() - - #Make the log directory of test case - #cmd = 'mkdir -p ' + logdir_eNB - #result = oai_eNB.send_recv(cmd) - #cmd = 'mkdir -p ' + logdir_UE - #result = oai_UE.send_recv(cmd) - #cmd = 'mkdir -p ' + logdir_EPC - #result = oai_EPC.send_recv(cmd) - - print "Updating the config files for ENB/UE/EPC..." - #updating the eNB/UE/EPC configuration file from the test case - #update_config_file(oai_eNB, eNB_config_file, logdirOAI5GRepo) - #update_config_file(oai_UE, UE_config_file, logdirOAI5GRepo) - #update_config_file(oai_EPC, EPC_config_file, logdirOpenaircnRepo) - test_result=1 - test_result_string='' - start_time=time.time() - for run in range(0,nruns): - run_result=1 - run_result_string='' - logdir_eNB = logdirOAI5GRepo+'/cmake_targets/autotests/log/'+ testcasename + '/run_' + str(run) - logdir_RRH = logdirOAI5GRepo+'/cmake_targets/autotests/log/'+ testcasename + '/run_' + str(run) - logdir_UE = logdirOAI5GRepo+'/cmake_targets/autotests/log/'+ testcasename + '/run_' + str(run) - logdir_EPC = logdirOpenaircnRepo+'/TEST/autotests/log/'+ testcasename + '/run_' + str(run) - logdir_local_testcase = logdir_local + '/cmake_targets/autotests/log/'+ testcasename + '/run_' + str(run) - #Make the log directory of test case - if RRHMachine != '': - cmd = 'rm -fr ' + logdir_RRH + ' ; mkdir -p ' + logdir_RRH - result = oai_RRH.send_recv(cmd) - cmd = 'rm -fr ' + logdir_eNB + ' ; mkdir -p ' + logdir_eNB - result = oai_eNB.send_recv(cmd) - cmd = 'rm -fr ' + logdir_UE + ' ; mkdir -p ' + logdir_UE - result = oai_UE.send_recv(cmd) - cmd = 'rm -fr ' + logdir_EPC + '; mkdir -p ' + logdir_EPC - result = oai_EPC.send_recv(cmd) - cmd = ' rm -fr ' + logdir_local_testcase + ' ; mkdir -p ' + logdir_local_testcase - result = os.system(cmd) - - if RRHMachine != '': - logfile_compile_RRH = logdir_RRH + '/RRH_compile' + '_' + str(run) + '_.log' - logfile_exec_RRH = logdir_RRH + '/RRH_exec' + '_' + str(run) + '_.log' - logfile_pre_exec_RRH = logdir_RRH + '/RRH_pre_exec' + '_' + str(run) + '_.log' - logfile_task_RRH_compile_out = logdir_RRH + '/RRH_task_compile_out' + '_' + str(run) + '_.log' - logfile_task_RRH_compile = logdir_local_testcase + '/RRH_task_compile' + '_' + str(run) + '_.log' - logfile_task_RRH_out = logdir_RRH + '/RRH_task_out' + '_' + str(run) + '_.log' - logfile_task_RRH = logdir_local_testcase + '/RRH_task' + '_' + str(run) + '_.log' - task_RRH_compile = ' ( uname -a ; date \n' - task_RRH_compile = task_RRH_compile + 'cd ' + logdirOAI5GRepo + ' ; source oaienv ; source cmake_targets/tools/build_helper \n' - task_RRH_compile = task_RRH_compile + 'env |grep OPENAIR \n' - if RRH_compile_prog != "": - task_RRH_compile = task_RRH_compile + ' ( ' + RRH_compile_prog + ' '+ RRH_compile_prog_args + ' ) > ' + logfile_compile_RRH + ' 2>&1 \n' - task_RRH_compile = task_RRH_compile + ' date ) > ' + logfile_task_RRH_compile_out + ' 2>&1 ' - write_file(logfile_task_RRH_compile, task_RRH_compile, mode="w") - - task_RRH = ' ( uname -a ; date \n' - task_RRH = task_RRH + ' export OPENAIR_TESTDIR=' + logdir_RRH + '\n' - task_RRH = task_RRH + 'cd ' + logdirOAI5GRepo + ' ; source oaienv ; source cmake_targets/tools/build_helper \n' - task_RRH = task_RRH + 'env |grep OPENAIR \n' + 'array_exec_pid=() \n' - - if RRH_pre_exec != "": - task_RRH = task_RRH + ' ( date; ' + RRH_pre_exec + ' '+ RRH_pre_exec_args + ' ) > ' + logfile_pre_exec_RRH + ' 2>&1 \n' - if RRH_main_exec != "": - task_RRH = task_RRH + ' ( date; ' + addsudo(RRH_main_exec + ' ' + RRH_main_exec_args, mypassword) + ' ) > ' + logfile_exec_RRH + ' 2>&1 & \n' - task_RRH = task_RRH + 'array_exec_pid+=($!) \n' - task_RRH = task_RRH + 'echo eNB_main_exec PID = $! \n' - #terminate the eNB test case after timeout_cmd seconds - task_RRH = task_RRH + finalize_deploy_script (timeout_cmd, RRH_terminate_missing_procs) + ' \n' - task_RRH = task_RRH + 'handle_ctrl_c' + '\n' - task_RRH = task_RRH + ' ) > ' + logfile_task_RRH_out + ' 2>&1 ' - write_file(logfile_task_RRH, task_RRH, mode="w") - - logfile_compile_eNB = logdir_eNB + '/eNB_compile' + '_' + str(run) + '_.log' - logfile_exec_eNB = logdir_eNB + '/eNB_exec' + '_' + str(run) + '_.log' - logfile_pre_exec_eNB = logdir_eNB + '/eNB_pre_exec' + '_' + str(run) + '_.log' - logfile_traffic_eNB = logdir_eNB + '/eNB_traffic' + '_' + str(run) + '_.log' - logfile_task_eNB_compile_out = logdir_eNB + '/eNB_task_compile_out' + '_' + str(run) + '_.log' - logfile_task_eNB_compile = logdir_local_testcase + '/eNB_task_compile' + '_' + str(run) + '_.log' - logfile_task_eNB_out = logdir_eNB + '/eNB_task_out' + '_' + str(run) + '_.log' - logfile_task_eNB = logdir_local_testcase + '/eNB_task' + '_' + str(run) + '_.log' - logfile_local_traffic_eNB_out = logdir_local_testcase + '/eNB_traffic' + '_' + str(run) + '_.log' - logfile_tshark_eNB = logdir_eNB + '/eNB_tshark' + '_' + str(run) + '_.log' - logfile_pcap_eNB = logdir_eNB + '/eNB_tshark' + '_' + str(run) + '_.pcap' - logfile_pcap_zip_eNB = logdir_eNB + '/eNB_tshark' + '_' + str(run) + '_.pcap.zip' - logfile_pcap_tmp_eNB = '/tmp/' + '/eNB_tshark' + '_' + str(run) + '_.pcap' - - task_eNB_compile = ' ( uname -a ; date \n' - task_eNB_compile = task_eNB_compile + 'cd ' + logdirOAI5GRepo + ' ; source oaienv ; source cmake_targets/tools/build_helper \n' - task_eNB_compile = task_eNB_compile + 'env |grep OPENAIR \n' - task_eNB_compile = task_eNB_compile + update_config_file(oai_eNB, eNB_config_file, logdirOAI5GRepo, '$OPENAIR_DIR/cmake_targets/autotests/tools/search_repl.py') + '\n' - if eNB_compile_prog != "": - task_eNB_compile = task_eNB_compile + ' ( ' + eNB_compile_prog + ' '+ eNB_compile_prog_args + ' ) > ' + logfile_compile_eNB + ' 2>&1 \n' - task_eNB_compile = task_eNB_compile + ' date ) > ' + logfile_task_eNB_compile_out + ' 2>&1 ' - write_file(logfile_task_eNB_compile, task_eNB_compile, mode="w") - - task_eNB = ' ( uname -a ; date \n' - task_eNB = task_eNB + ' export OPENAIR_TESTDIR=' + logdir_eNB + '\n' - task_eNB = task_eNB + 'cd ' + logdirOAI5GRepo + ' ; source oaienv ; source cmake_targets/tools/build_helper \n' - task_eNB = task_eNB + 'env |grep OPENAIR \n' + 'array_exec_pid=() \n' - - if eNB_pre_exec != "": - task_eNB = task_eNB + ' ( date; ' + eNB_pre_exec + ' '+ eNB_pre_exec_args + ' ) > ' + logfile_pre_exec_eNB + ' 2>&1 \n' - if eNB_main_exec != "": - task_eNB = task_eNB + ' ( date; ' + addsudo(eNB_main_exec + ' ' + eNB_main_exec_args, mypassword) + ' ) > ' + logfile_exec_eNB + ' 2>&1 & \n' - task_eNB = task_eNB + 'array_exec_pid+=($!) \n' - task_eNB = task_eNB + 'echo eNB_main_exec PID = $! \n' - if eNB_traffic_exec != "": - cmd_traffic = eNB_traffic_exec + ' ' + eNB_traffic_exec_args - if cmd_traffic.find('-c') >= 0: - cmd_traffic = cmd_traffic + ' -t ' + str(timeout_cmd - 60) - task_eNB = task_eNB + ' (date; ' + cmd_traffic + ' ) > ' + logfile_traffic_eNB + ' 2>&1 & \n' - task_eNB = task_eNB + 'array_exec_pid+=($!) \n' - task_eNB = task_eNB + 'echo eNB_traffic_exec PID = $! \n' - - task_eNB = task_eNB + ' (date; sudo rm -f ' + logfile_pcap_tmp_eNB + ' ; sudo -E tshark -i lo -s 65535 -a duration:' + str(timeout_cmd-10)+ ' -w ' + logfile_pcap_tmp_eNB+ ' ; sudo -E chown ' + user + ' ' + logfile_pcap_tmp_eNB + ' ; zip -j -9 ' + logfile_pcap_zip_eNB + ' ' + logfile_pcap_tmp_eNB + ' ) > ' + logfile_tshark_eNB + ' 2>&1 & \n ' - task_eNB = task_eNB + 'array_exec_pid+=($!) \n' - task_eNB = task_eNB + 'echo eNB_tshark_exec PID = $! \n' - #terminate the eNB test case after timeout_cmd seconds - task_eNB = task_eNB + finalize_deploy_script (timeout_cmd, eNB_terminate_missing_procs) + ' \n' - #task_eNB = task_eNB + 'sleep ' + str(timeout_cmd) + ' \n' - task_eNB = task_eNB + 'handle_ctrl_c' + '\n' - task_eNB = task_eNB + ' ) > ' + logfile_task_eNB_out + ' 2>&1 ' - write_file(logfile_task_eNB, task_eNB, mode="w") - - #task_eNB = 'echo \" ' + task_eNB + '\" > ' + logfile_script_eNB + ' 2>&1 ; ' + task_eNB - logfile_compile_UE = logdir_UE + '/UE_compile' + '_' + str(run) + '_.log' - logfile_exec_UE = logdir_UE + '/UE_exec' + '_' + str(run) + '_.log' - logfile_pre_exec_UE = logdir_UE + '/UE_pre_exec' + '_' + str(run) + '_.log' - logfile_traffic_UE = logdir_UE + '/UE_traffic' + '_' + str(run) + '_.log' - logfile_task_UE_out = logdir_UE + '/UE_task_out' + '_' + str(run) + '_.log' - logfile_task_UE = logdir_local_testcase + '/UE_task' + '_' + str(run) + '_.log' - logfile_task_UE_compile_out = logdir_UE + '/UE_task_compile_out' + '_' + str(run) + '_.log' - logfile_task_UE_compile = logdir_local_testcase + '/UE_task_compile' + '_' + str(run) + '_.log' - logfile_local_traffic_UE_out = logdir_local_testcase + '/UE_traffic' + '_' + str(run) + '_.log' - - task_UE_compile = ' ( uname -a ; date \n' - task_UE_compile = task_UE_compile + 'array_exec_pid=()' + '\n' - task_UE_compile = task_UE_compile + 'cd ' + logdirOAI5GRepo + '\n' - task_UE_compile = task_UE_compile + 'source oaienv \n' - task_UE_compile = task_UE_compile + 'source cmake_targets/tools/build_helper \n' - task_UE_compile = task_UE_compile + 'env |grep OPENAIR \n' - task_UE_compile = task_UE_compile + update_config_file(oai_UE, UE_config_file, logdirOAI5GRepo, '$OPENAIR_DIR/cmake_targets/autotests/tools/search_repl.py') + '\n' - if UE_compile_prog != "": - task_UE_compile = task_UE_compile + ' ( ' + UE_compile_prog + ' '+ UE_compile_prog_args + ' ) > ' + logfile_compile_UE + ' 2>&1 \n' - task_UE_compile = task_UE_compile + ' ) > ' + logfile_task_UE_compile_out + ' 2>&1 ' - write_file(logfile_task_UE_compile, task_UE_compile, mode="w") - - task_UE = ' ( uname -a ; date \n' - task_UE = task_UE + 'array_exec_pid=()' + '\n' - task_UE = task_UE + 'cd ' + logdirOAI5GRepo + '\n' - task_UE = task_UE + 'source oaienv \n' - task_UE = task_UE + 'source cmake_targets/tools/build_helper \n' - task_UE = task_UE + 'env |grep OPENAIR \n' - if UE_pre_exec != "": - task_UE = task_UE + ' ( date; ' + UE_pre_exec + ' '+ UE_pre_exec_args + ' ) > ' + logfile_pre_exec_UE + ' 2>&1 \n' - if UE_main_exec != "": - task_UE = task_UE + ' ( date; ' + addsudo(UE_main_exec + ' ' + UE_main_exec_args, mypassword) + ' ) > ' + logfile_exec_UE + ' 2>&1 & \n' - task_UE = task_UE + 'array_exec_pid+=($!) \n' - task_UE = task_UE + 'echo UE_main_exec PID = $! \n' - if UE_traffic_exec != "": - cmd_traffic = UE_traffic_exec + ' ' + UE_traffic_exec_args - if cmd_traffic.find('-c') >= 0: - cmd_traffic = cmd_traffic + ' -t ' + str(timeout_cmd - 60) - task_UE = task_UE + ' ( date; ' + cmd_traffic + ' ) >' + logfile_traffic_UE + ' 2>&1 & \n' - task_UE = task_UE + 'array_exec_pid+=($!) \n' - task_UE = task_UE + 'echo UE_traffic_exec PID = $! \n' - #terminate the UE test case after timeout_cmd seconds - task_UE = task_UE + finalize_deploy_script (timeout_cmd, UE_terminate_missing_procs) + ' \n' - #task_UE = task_UE + 'sleep ' + str(timeout_cmd) + ' \n' - task_UE = task_UE + 'handle_ctrl_c' + '\n' - task_UE = task_UE + ' ) > ' + logfile_task_UE_out + ' 2>&1 ' - write_file(logfile_task_UE, task_UE, mode="w") - #task_UE = 'echo \" ' + task_UE + '\" > ' + logfile_script_UE + ' 2>&1 ; ' + task_UE - - logfile_compile_EPC = logdir_EPC + '/EPC_compile' + '_' + str(run) + '_.log' - logfile_compile_HSS = logdir_EPC + '/HSS_compile' + '_' + str(run) + '_.log' - logfile_exec_EPC = logdir_EPC + '/EPC_exec' + '_' + str(run) + '_.log' - logfile_pre_exec_EPC = logdir_EPC + '/EPC_pre_exec' + '_' + str(run) + '_.log' - logfile_exec_HSS = logdir_EPC + '/HSS_exec' + '_' + str(run) + '_.log' - logfile_traffic_EPC = logdir_EPC + '/EPC_traffic' + '_' + str(run) + '_.log' - logfile_task_EPC_out = logdir_EPC + '/EPC_task_out' + '_' + str(run) + '_.log' - logfile_task_EPC = logdir_local_testcase + '/EPC_task' + '_' + str(run) + '_.log' - logfile_task_EPC_compile_out = logdir_EPC + '/EPC_task_compile_out' + '_' + str(run) + '_.log' - logfile_task_EPC_compile = logdir_local_testcase + '/EPC_task_compile' + '_' + str(run) + '_.log' - logfile_local_traffic_EPC_out = logdir_local_testcase + '/EPC_traffic' + '_' + str(run) + '_.log' - - task_EPC_compile = ' ( uname -a ; date \n' - task_EPC_compile = task_EPC_compile + 'array_exec_pid=()' + '\n' - task_EPC_compile = task_EPC_compile + 'cd ' + logdirOpenaircnRepo + ' ; source oaienv \n' - task_EPC_compile = task_EPC_compile + update_config_file(oai_EPC, EPC_config_file, logdirOpenaircnRepo, logdirOpenaircnRepo+'/TEST/autotests/tools/search_repl.py') + '\n' - task_EPC_compile = task_EPC_compile + 'source BUILD/TOOLS/build_helper \n' - if EPC_compile_prog != "": - task_EPC_compile = task_EPC_compile + '(' + EPC_compile_prog + ' ' + EPC_compile_prog_args + ' ) > ' + logfile_compile_EPC + ' 2>&1 \n' - if HSS_compile_prog != "": - task_EPC_compile = task_EPC_compile + '(' + HSS_compile_prog + ' ' + HSS_compile_prog_args + ' ) > ' + logfile_compile_HSS + ' 2>&1 \n' - task_EPC_compile = task_EPC_compile + ' ) > ' + logfile_task_EPC_compile_out + ' 2>&1 ' - write_file(logfile_task_EPC_compile, task_EPC_compile, mode="w") - - task_EPC = ' ( uname -a ; date \n' - task_EPC = task_EPC + ' export OPENAIRCN_TESTDIR=' + logdir_EPC + '\n' - task_EPC = task_EPC + 'array_exec_pid=()' + '\n' - task_EPC = task_EPC + 'cd ' + logdirOpenaircnRepo + '; source oaienv\n' - task_EPC = task_EPC + 'source BUILD/TOOLS/build_helper \n' - if EPC_pre_exec != "": - task_EPC = task_EPC + ' ( date; ' + EPC_pre_exec + ' '+ EPC_pre_exec_args + ' ) > ' + logfile_pre_exec_EPC + ' 2>&1 \n' - if HSS_main_exec != "": - task_EPC = task_EPC + '( date; ' + addsudo (HSS_main_exec + ' ' + HSS_main_exec_args, mypassword) + ' ) > ' + logfile_exec_HSS + ' 2>&1 & \n' - task_EPC = task_EPC + 'array_exec_pid+=($!) \n' - task_EPC = task_EPC + 'echo HSS_main_exec PID = $! \n' - if EPC_main_exec != "": - task_EPC = task_EPC + '( date; ' + addsudo (EPC_main_exec + ' ' + EPC_main_exec_args, mypassword) + ' ) > ' + logfile_exec_EPC + ' 2>&1 & \n' - task_EPC = task_EPC + 'array_exec_pid+=($!) \n' - task_EPC = task_EPC + 'echo EPC_main_exec PID = $! \n' - if EPC_traffic_exec != "": - cmd_traffic = EPC_traffic_exec + ' ' + EPC_traffic_exec_args - if cmd_traffic.find('-c') >= 0: - cmd_traffic = cmd_traffic + ' -t ' + str(timeout_cmd - 60) - task_EPC = task_EPC + '( date; ' + cmd_traffic + ' ) > ' + logfile_traffic_EPC + ' 2>&1 & \n' - task_EPC = task_EPC + 'array_exec_pid+=($!) \n' - task_EPC = task_EPC + 'echo EPC_traffic_exec PID = $! \n' - #terminate the EPC test case after timeout_cmd seconds - task_EPC = task_EPC + finalize_deploy_script (timeout_cmd, EPC_terminate_missing_procs) + '\n' - #task_EPC = task_EPC + 'sleep ' + str(timeout_cmd) + '\n' - task_EPC = task_EPC + 'handle_ctrl_c' '\n' - task_EPC = task_EPC + ' ) > ' + logfile_task_EPC_out + ' 2>&1 ' - write_file(logfile_task_EPC, task_EPC, mode="w") - - #first we compile all the programs but only for run_0 - if run == 0: - thread_EPC = oaiThread(1, "EPC_thread", EPCMachine, user, password , task_EPC_compile, False, timeout_thread) - thread_eNB = oaiThread(2, "eNB_thread", eNBMachine, user, password , task_eNB_compile, False, timeout_thread) - thread_UE = oaiThread(3, "UE_thread", UEMachine, user, password , task_UE_compile, False, timeout_thread) - if RRHMachine != '': - thread_RRH = oaiThread(4, "RRH_thread", RRHMachine, user, password , task_RRH_compile, False, timeout_thread) - threads=[] - threads.append(thread_eNB) - threads.append(thread_UE) - threads.append(thread_EPC) - if RRHMachine != '': - threads.append(thread_RRH) - # Start new Threads - thread_eNB.start() - thread_UE.start() - thread_EPC.start() - if RRHMachine != '': - thread_RRH.start() - #Wait for all the compile threads to complete - for t in threads: - t.join() - - #Now we execute all the threads - thread_EPC = oaiThread(1, "EPC_thread", EPCMachine, user, password , task_EPC, False, timeout_thread) - thread_eNB = oaiThread(2, "eNB_thread", eNBMachine, user, password , task_eNB, False, timeout_thread) - thread_UE = oaiThread(3, "UE_thread", UEMachine, user, password , task_UE, False, timeout_thread) - if RRHMachine != '': - thread_RRH = oaiThread(4, "RRH_thread", RRHMachine, user, password , task_RRH, False, timeout_thread) - threads=[] - threads.append(thread_eNB) - threads.append(thread_UE) - threads.append(thread_EPC) - if RRHMachine != '': - threads.append(thread_RRH) - # Start new Threads - - thread_eNB.start() - thread_UE.start() - thread_EPC.start() - if RRHMachine != '': - thread_RRH.start() - #Wait for all the compile threads to complete - for t in threads: - t.join() - #Now we get the log files from remote machines on the local machine - if RRHMachine != '': - cleanOldProgramsAllMachines([oai_eNB, oai_UE, oai_EPC, oai_RRH] , oldprogramList, CleanUpAluLteBox, ExmimoRfStop, [logdir_eNB, logdir_UE, logdir_EPC, logdir_RRH], logdirOAI5GRepo) - else: - cleanOldProgramsAllMachines([oai_eNB, oai_UE, oai_EPC] , oldprogramList, CleanUpAluLteBox, ExmimoRfStop, [logdir_eNB, logdir_UE, logdir_EPC], logdirOAI5GRepo) - logfile_UE_stop_script_out = logdir_UE + '/UE_stop_script_out' + '_' + str(run) + '_.log' - logfile_UE_stop_script = logdir_local_testcase + '/UE_stop_script' + '_' + str(run) + '_.log' - - if UE_stop_script != "": - cmd = ' ( uname -a ; date \n' - cmd = cmd + 'cd ' + logdirOAI5GRepo + ' ; source oaienv ; source cmake_targets/tools/build_helper \n' - cmd = cmd + 'env |grep OPENAIR \n' + 'array_exec_pid=() \n' - cmd = cmd + UE_stop_script + '\n' - cmd = cmd + ') > ' + logfile_UE_stop_script_out + ' 2>&1 ' - write_file(logfile_UE_stop_script , cmd, mode="w") - thread_UE = oaiThread(4, "UE_thread", UEMachine, user, password , cmd, False, timeout_thread) - thread_UE.start() - thread_UE.join() - - #Now we change the permissions of the logfiles to avoid some of them being with root permissions - cmd = 'sudo -E chown -R ' + user + ' ' + logdir_eNB - res= oai_eNB.send_recv(cmd) - print "Changing permissions of logdir <" + logdir_eNB + "> in eNB machine..." + res - - cmd = 'sudo -E chown -R ' + user + ' ' + logdir_UE - res= oai_UE.send_recv(cmd) - print "Changing permissions of logdir <" + logdir_UE + "> in UE machine..." + res - - cmd = 'sudo -E chown -R ' + user + ' ' + logdir_EPC - res= oai_EPC.send_recv(cmd) - print "Changing permissions of logdir <" + logdir_EPC + "> in EPC machine..." + res - - if RRHMachine != '': - cmd = 'sudo -E chown -R ' + user + ' ' + logdir_RRH - res= oai_RRH.send_recv(cmd) - print "Changing permissions of logdir <" + logdir_RRH + "> in RRH machine..." + res - - print "Copying files from EPCMachine : " + EPCMachine + "logdir_EPC = " + logdir_EPC - SSHSessionWrapper(EPCMachine, user, None, password, logdir_EPC, logdir_local + '/cmake_targets/autotests/log/'+ testcasename, "get_all") - - print "Copying files from eNBMachine " + eNBMachine + "logdir_eNB = " + logdir_eNB - SSHSessionWrapper(eNBMachine, user, None, password, logdir_eNB, logdir_local + '/cmake_targets/autotests/log/'+ testcasename, "get_all") - - print "Copying files from UEMachine : " + UEMachine + "logdir_UE = " + logdir_UE - SSHSessionWrapper(UEMachine, user, None, password, logdir_UE, logdir_local + '/cmake_targets/autotests/log/'+ testcasename, "get_all") - - if RRHMachine != '': - print "Copying files from RRHMachine : " + RRHMachine + "logdir_RRH = " + logdir_RRH - SSHSessionWrapper(RRHMachine, user, None, password, logdir_RRH, logdir_local + '/cmake_targets/autotests/log/'+ testcasename, "get_all") - - - #Currently we only perform throughput tests - tput_run_string='' - result, tput_string = tput_test_search_expr(eNB_search_expr_true, logfile_local_traffic_eNB_out) - tput_run_string = tput_run_string + tput_string - run_result=run_result&result - result, tput_string = tput_test_search_expr(EPC_search_expr_true, logfile_local_traffic_EPC_out) - run_result=run_result&result - tput_run_string = tput_run_string + tput_string - result, tput_string = tput_test_search_expr(UE_search_expr_true, logfile_local_traffic_UE_out) - run_result=run_result&result - tput_run_string = tput_run_string + tput_string - - if run_result == 1: - run_result_string = ' RUN_'+str(run) + ' = PASS' - else: - run_result_string = ' RUN_'+str(run) + ' = FAIL' - - #If there is assertion, we mark the test case as failure as most likely eNB crashed - cmd = "grep -ilr \"assertion\" " + logdir_local_testcase + " | cat " - cmd_out = subprocess.check_output ([cmd], shell=True) - if len(cmd_out) !=0 : - run_result=0 - run_result_string = ' RUN_'+str(run) + ' = FAIL(Assert)' - - #If there is thread busy error, we mark the test case as failure as most likely eNB crashed - cmd = "grep -ilr \"thread busy\" " + logdir_local_testcase + " | cat " - cmd_out = subprocess.check_output ([cmd], shell=True) - if len(cmd_out) !=0: - run_result=0 - run_result_string = ' RUN_'+str(run) + ' = FAIL(Thread_Busy)' - - #If there is Segmentation fault, we mark the test case as failure as most likely eNB crashed - cmd = "grep -ilr \"segmentation fault\" " + logdir_local_testcase + " | cat " - cmd_out = subprocess.check_output ([cmd], shell=True) - if len(cmd_out) !=0: - run_result=0 - run_result_string = ' RUN_'+str(run) + ' = FAIL(SEGFAULT)' - - run_result_string = run_result_string + tput_run_string - - test_result=test_result & run_result - test_result_string=test_result_string + run_result_string - - oai_eNB.disconnect() - oai_UE.disconnect() - oai_EPC.disconnect() - #We need to close the new ssh session that was created - #if index_eNBMachine == index_EPCMachine: - # oai_EPC.disconnect() - #Now we finalize the xml file of the test case - end_time=time.time() - duration= end_time - start_time - xmlFile = logdir_local + '/cmake_targets/autotests/log/'+ testcasename + '/test.' + testcasename + '.xml' - if test_result ==0: - result='FAIL' - else: - result = 'PASS' - xml="\n \n" - write_file(xmlFile, xml, mode="w") - - - - -# \brief handler for executing test cases (lte-softmodem-noS1) -# \param testcase name of testcase -# \param oldprogramList list of programs which must be terminated before running a test case -# \param logdirOAI5GRepo directory on remote machine which has openairinterface5g repo installed -# \param logdirOpenaircnRepo directory on remote machine which has openair-cn repo installed -# \param MachineList list of all machines on which test cases can be run -# \param user username with which to login -# \param password password with which to login -# \param CleanupAluLteBox string that contains commands to stop ALU Bell Labs LTEBox (specified in test_case_list.xml) -# \param ExmimoRfStop command to stop EXMIMO Card -# \param nruns_lte-softmodem global parameter to override number of runs (nruns) within the test case -def handle_testcaseclass_softmodem_noS1 (testcase, oldprogramList, logdirOAI5GRepo , logdirOpenaircnRepo, MachineList, user, password, CleanUpAluLteBox, ExmimoRfStop, nruns_lte_softmodem, timeout_cmd): - #We ignore the password sent to this function for secuirity reasons for password present in log files - #It is recommended to add a line in /etc/sudoers that looks something like below. The line below will run sudo without password prompt - # your_user_name ALL=(ALL:ALL) NOPASSWD: ALL - - indent="\t" - threads=[] - - # - # Test case parameters - # ----------------------------------------------------------------------------- - testcase_verdict = 'PASS' - testcase_time_start = datetime.datetime.now() - testcase_name = testcase.get('id') - testcase_class = testcase.findtext('class',default='') - testcase_desc = testcase.findtext('desc',default='') - if timeout_cmd == '': - timeout_cmd = testcase.findtext('TimeOut_cmd',default='') - timeout_cmd = int(float(timeout_cmd)) - timeout_thread = timeout_cmd + 60 #Timeout_thread is more than that of cmd to have room for compilation time, etc - if nruns_lte_softmodem == '': - nruns = testcase.findtext('nruns',default='') - else: - nruns = nruns_lte_softmodem - nruns = int(float(nruns)) - tags = testcase.findtext('tags',default='') - - max_ntries = testcase.findtext('max_ntries',default='') - if max_ntries : - max_ntries = int(float(max_ntries)) - else : - max_ntries = nruns - - print( indent + "> testcase time start : " + str(testcase_time_start) ) - print( indent + "> testcase class : " + testcase_class ) - print( indent + "> testcase description : " + testcase_desc ) - print( indent + "> testcase timeout : " + str(timeout_cmd) ) - print( indent + "> testcase thread timeout : " + str(timeout_thread) ) - print( indent + "> number of runs : " + str(nruns) ) - print( indent + "> number of max tries : " + str(max_ntries) ) - print( indent + "> testcase tags : " + tags ) - - logdir_local_testcase = openairdir_local + '/cmake_targets/autotests/log/'+ testcasename - logdir_eNB_testcase = logdirOAI5GRepo +'/cmake_targets/autotests/log/'+ testcasename - logdir_UE_testcase = logdirOAI5GRepo +'/cmake_targets/autotests/log/'+ testcasename - - # - # Local checks for test cases - # ----------------------------------------------- - - # Logging directory - if (not os.path.exists(logdir_local_testcase)): - os.system('mkdir -p ' + logdir_local_testcase) - - # - # REMOTE MACHINE COMPILATION - # ------------------------------------------------ - - eNBMachine = testcase.findtext('eNB',default='') - eNB_config_file = testcase.findtext('eNB_config_file',default='') - eNB_compile_prog = testcase.findtext('eNB_compile_prog',default='') - eNB_compile_prog_args = testcase.findtext('eNB_compile_prog_args',default='') - - logfile_compile_eNB = logdir_eNB_testcase + '/eNB_compile.log' - logfile_task_eNB_compile_out = logdir_eNB_testcase + '/eNB_task_compile_out.log' - logfile_task_eNB_compile = logdir_local_testcase + '/eNB_task_compile.log' - - # Check that machine is in test setup machine list - print( Fore.WHITE + indent + "> testcase eNB machine :"), - if (eNBMachine not in MachineList): - print( Fore.RED + eNBMachine + " not in test setup machine list") - testcase_verdict = 'INCON' - else : - print eNBMachine, - # get machine description - eNBMachineDesc = MachineDescDic[eNBMachine] - index_eNBMachine = MachineList.index(eNBMachine) - # check that openairinterface is installed on machine - oai_eNB = openair('localdomain', eNBMachine) - oai_eNB.connect(user, password) - cmd = 'cd ' + logdirOAI5GRepo + '; source oaienv ; env|grep --color=never OPENAIR' - res= oai_eNB.send_recv(cmd) - m = re.search('OPENAIR_HOME', res, re.DOTALL) - if m: - print - # Create testcase directory on remote eNB - cmd = 'rm -fr ' + logdir_eNB_testcase + ' ; mkdir -p ' + logdir_eNB_testcase - result = oai_eNB.send_recv(cmd) - - # Check if we need to compile lte-softmodem-noS1 on remote machine - eNB_compile_cmd = eNB_compile_prog + ' '+ eNB_compile_prog_args - if ('last_compile_prog' in eNBMachineDesc) and eNBMachineDesc['last_compile_prog'] == eNB_compile_cmd: - print( Fore.WHITE + indent + "> eNB machine compilation : skipped -> "+eNB_compile_cmd ) - else: - print( Fore.WHITE + indent + "> eNB machine compilation : triggered -> "+eNB_compile_cmd ) - eNBMachineDesc['last_compile_prog'] = eNB_compile_prog + ' '+ eNB_compile_prog_args # if last compilation is the same do not compile again - task_eNB_compile = ' ( uname -a ; date \n' - task_eNB_compile = task_eNB_compile + 'cd ' + logdirOAI5GRepo + ' ; source oaienv ; source cmake_targets/tools/build_helper \n' - task_eNB_compile = task_eNB_compile + 'env |grep OPENAIR \n' - task_eNB_compile = task_eNB_compile + update_config_file(oai_eNB, eNB_config_file, logdirOAI5GRepo, '$OPENAIR_DIR/cmake_targets/autotests/tools/search_repl.py') + '\n' - if eNB_compile_cmd != "": - task_eNB_compile = task_eNB_compile + ' ( ' + eNB_compile_cmd + ' ) > ' + logfile_compile_eNB + ' 2>&1 \n' - task_eNB_compile = task_eNB_compile + ' date ) > ' + logfile_task_eNB_compile_out + ' 2>&1 ' - write_file(logfile_task_eNB_compile, task_eNB_compile, mode="w") - - - thread_eNB = oaiThread(1, "eNB_thread_compile", eNBMachine, user, password , task_eNB_compile, False, timeout_thread) - threads.append(thread_eNB) - thread_eNB.start() - - else: - print( Fore.RED + " -> OAI5G not properly setup ! please check REMOTE MACHINE PREPARATION step") - testcase_verdict = 'INCON' - - - UEMachine = testcase.findtext('UE',default='') - UE_config_file = testcase.findtext('UE_config_file',default='') - UE_compile_prog = testcase.findtext('UE_compile_prog',default='') - UE_compile_prog_args = testcase.findtext('UE_compile_prog_args',default='') - - logfile_compile_UE = logdir_UE_testcase + '/UE_compile.log' - logfile_task_UE_compile_out = logdir_UE_testcase + '/UE_task_compile_out.log' - logfile_task_UE_compile = logdir_local_testcase + '/UE_task_compile.log' - - # Check that machine is in test setup machine list - print( Fore.WHITE + indent + "> testcase UE machine :"), - if (UEMachine not in MachineList): - print( Fore.RED + UEMachine + " not in test setup machine list") - testcase_verdict = 'INCON' - else : - print UEMachine, - # get machine description - UEMachineDesc = MachineDescDic[UEMachine] - index_UEMachine = MachineList.index(UEMachine) - # check that openairinterface is installed on machine - oai_UE = openair('localdomain', UEMachine) - oai_UE.connect(user, password) - cmd = 'cd ' + logdirOAI5GRepo + '; source oaienv ; env|grep --color=never OPENAIR' - res= oai_UE.send_recv(cmd) - m = re.search('OPENAIR_HOME', res, re.DOTALL) - if m: - print - # Create testcase directory on remote UE - cmd = 'rm -fr ' + logdir_UE_testcase + ' ; mkdir -p ' + logdir_UE_testcase - result = oai_UE.send_recv(cmd) - - # Check if we need to compile lte-softmodem-noS1 on remote machine - UE_compile_cmd = UE_compile_prog + ' '+ UE_compile_prog_args - if ('last_compile_prog' in UEMachineDesc) and UEMachineDesc['last_compile_prog'] == UE_compile_cmd: - print( Fore.WHITE + indent + "> UE machine compilation : skipped -> "+UE_compile_cmd ) - else: - print( Fore.WHITE + indent + "> UE machine compilation : triggered -> "+UE_compile_cmd ) - UEMachineDesc['last_compile_prog'] = UE_compile_prog + ' '+ UE_compile_prog_args - task_UE_compile = ' ( uname -a ; date \n' - task_UE_compile = task_UE_compile + 'cd ' + logdirOAI5GRepo + ' ; source oaienv ; source cmake_targets/tools/build_helper \n' - task_UE_compile = task_UE_compile + 'env |grep OPENAIR \n' - task_UE_compile = task_UE_compile + update_config_file(oai_UE, UE_config_file, logdirOAI5GRepo, '$OPENAIR_DIR/cmake_targets/autotests/tools/search_repl.py') + '\n' - if UE_compile_cmd != "": - task_UE_compile = task_UE_compile + ' ( ' + UE_compile_cmd + ' ) > ' + logfile_compile_UE + ' 2>&1 \n' - task_UE_compile = task_UE_compile + ' date ) > ' + logfile_task_UE_compile_out + ' 2>&1 ' - write_file(logfile_task_UE_compile, task_UE_compile, mode="w") - - thread_UE = oaiThread(2, "UE_thread_compile", UEMachine, user, password , task_UE_compile, False, timeout_thread) - threads.append(thread_UE) - thread_UE.start() - - else: - print( Fore.RED + " -> OAI5G not properly setup ! please check REMOTE MACHINE PREPARATION step") - testcase_verdict = 'INCON' - - - - - - - # Wait for Compilation thread to terminate - #----------------------------------------- - for t in threads: - t.join() - - # TODO check that compilation is succeed - - #first we compile all the programs -# thread_UE = oaiThread(3, "UE_thread", UEMachine, user, password , task_UE_compile, False, timeout_thread) -# threads.append(thread_UE) -# thread_UE.start() - - - - - -# index_UEMachine = MachineList.index(UEMachine) -# oai_UE = openair('localdomain', UEMachine) -# oai_UE.connect(user, password) -# res = oai_UE.send_recv(cmd) -# res = oai_eNB.send_recv(cmd) - - - - # - # RUN LOOP - # ------------------------------------------------ - if testcase_verdict != 'PASS': # if something went wrong to not run test cases - max_ntries=0 - - indent="\t\t" - - runs_results = [] - nb_runs = 0 - nb_run_pass = 0 - nb_run_failed = 0 - nb_run_inc = 0 - nb_run_skip = 0 - - nb_seg_fault = 0 - - for run in range(0,max_ntries): - - if nruns == nb_run_pass + nb_run_failed: - break - - nb_runs += 1 - - # - # RUN initialization - # ---------------------------------------------------- - - prefix_string = Fore.WHITE + indent + "> RUN_"+str(run).zfill(2)+" :" - -# print (Fore.WHITE + indent + "> RUN_"+str(run).zfill(2)+" : " ), -# sys.stdout.flush() - - run_start_time=datetime.datetime.now() - - logdir_local_run = openairdir_local + '/cmake_targets/autotests/log/'+ testcasename + '/run_' + str(run) - logdir_eNB_run = logdirOAI5GRepo +'/cmake_targets/autotests/log/' + testcasename + '/run_' + str(run) - logdir_UE_run = logdirOAI5GRepo +'/cmake_targets/autotests/log/' + testcasename + '/run_' + str(run) - - cmd = 'rm -fr ' + logdir_eNB_run + ' ; mkdir -p ' + logdir_eNB_run - result = oai_eNB.send_recv(cmd) - cmd = 'rm -fr ' + logdir_UE_run + ' ; mkdir -p ' + logdir_UE_run - result = oai_UE.send_recv(cmd) - cmd = ' rm -fr ' + logdir_local_run + ' ; mkdir -p ' + logdir_local_run - result = os.system(cmd) - - - # - # RUN parametrization - # ---------------------------------------------------- - eNB_pre_exec = testcase.findtext('eNB_pre_exec',default='') - eNB_pre_exec_args = testcase.findtext('eNB_pre_exec_args',default='') - eNB_main_exec = testcase.findtext('eNB_main_exec',default='') - eNB_main_exec_args = testcase.findtext('eNB_main_exec_args',default='') - eNB_traffic_exec = testcase.findtext('eNB_traffic_exec',default='') - eNB_traffic_exec_args = testcase.findtext('eNB_traffic_exec_args',default='') - eNB_terminate_missing_procs = testcase.findtext('eNB_terminate_missing_procs',default='True') - - logfile_exec_eNB = logdir_eNB_run + '/eNB_exec' + '_' + str(run) + '_.log' - logfile_pre_exec_eNB = logdir_eNB_run + '/eNB_pre_exec' + '_' + str(run) + '_.log' - logfile_task_eNB_out = logdir_eNB_run + '/eNB_task_out' + '_' + str(run) + '_.log' - logfile_traffic_eNB = logdir_eNB_run + '/eNB_traffic' + '_' + str(run) + '_.log' - logfile_task_eNB = logdir_local_run + '/eNB_task' + '_' + str(run) + '_.log' - - task_eNB = ' ( uname -a ; date \n' - task_eNB = task_eNB + 'cd ' + logdirOAI5GRepo + ' ; source oaienv ; source cmake_targets/tools/build_helper \n' - task_eNB = task_eNB + 'env |grep OPENAIR \n' + 'array_exec_pid=() \n' - if eNB_pre_exec != "": - task_eNB = task_eNB + ' ( date; ' + eNB_pre_exec + ' '+ eNB_pre_exec_args + ' ) > ' + logfile_pre_exec_eNB + ' 2>&1 \n' - if eNB_main_exec != "": - task_eNB = task_eNB + ' ( date; ' + addsudo(eNB_main_exec + ' ' + eNB_main_exec_args, '') + ' ) > ' + logfile_exec_eNB + ' 2>&1 & \n' - task_eNB = task_eNB + 'array_exec_pid+=($!) \n' - task_eNB = task_eNB + 'echo eNB_main_exec PID = $! \n' - if eNB_traffic_exec != "": - cmd_traffic = eNB_traffic_exec + ' ' + eNB_traffic_exec_args - if cmd_traffic.find('-c') >= 0: - cmd_traffic = cmd_traffic + ' -t ' + str(timeout_cmd - 80) - task_eNB = task_eNB + ' (date; ' + cmd_traffic + ' ) > ' + logfile_traffic_eNB + ' 2>&1 & \n' - task_eNB = task_eNB + 'array_exec_pid+=($!) \n' - task_eNB = task_eNB + 'echo eNB_traffic_exec PID = $! \n' - #terminate the eNB test case after timeout_cmd seconds - task_eNB = task_eNB + finalize_deploy_script (timeout_cmd, eNB_terminate_missing_procs) + ' \n' - #task_eNB = task_eNB + 'sleep ' + str(timeout_cmd) + ' \n' - task_eNB = task_eNB + 'handle_ctrl_c' + '\n' - task_eNB = task_eNB + ' ) > ' + logfile_task_eNB_out + ' 2>&1 ' - write_file(logfile_task_eNB, task_eNB, mode="w") - - - UE_pre_exec = testcase.findtext('UE_pre_exec',default='') - UE_pre_exec_args = testcase.findtext('UE_pre_exec_args',default='') - UE_main_exec = testcase.findtext('UE_main_exec',default='') - UE_main_exec_args = testcase.findtext('UE_main_exec_args',default='') - UE_traffic_exec = testcase.findtext('UE_traffic_exec',default='') - UE_traffic_exec_args = testcase.findtext('UE_traffic_exec_args',default='') - UE_terminate_missing_procs = testcase.findtext('UE_terminate_missing_procs',default='True') - UE_search_expr_true = testcase.findtext('UE_search_expr_true','') - - logfile_exec_UE = logdir_UE_run + '/UE_exec' + '_' + str(run) + '_.log' - logfile_pre_exec_UE = logdir_UE_run + '/UE_pre_exec' + '_' + str(run) + '_.log' - logfile_task_UE_out = logdir_UE_run + '/UE_task_out' + '_' + str(run) + '_.log' - logfile_traffic_UE = logdir_UE_run + '/UE_traffic' + '_' + str(run) + '_.log' - logfile_task_UE = logdir_local_run + '/UE_task' + '_' + str(run) + '_.log' - - - task_UE = ' ( uname -a ; date \n' - task_UE = task_UE + 'array_exec_pid=()' + '\n' - task_UE = task_UE + 'cd ' + logdirOAI5GRepo + '\n' - task_UE = task_UE + 'source oaienv \n' - task_UE = task_UE + 'source cmake_targets/tools/build_helper \n' - task_UE = task_UE + 'env |grep OPENAIR \n' - if UE_pre_exec != "": - task_UE = task_UE + ' ( date; ' + UE_pre_exec + ' '+ UE_pre_exec_args + ' ) > ' + logfile_pre_exec_UE + ' 2>&1 \n' - if UE_main_exec != "": - task_UE = task_UE + ' ( date; ' + addsudo(UE_main_exec + ' ' + UE_main_exec_args, '') + ' ) > ' + logfile_exec_UE + ' 2>&1 & \n' - task_UE = task_UE + 'array_exec_pid+=($!) \n' - task_UE = task_UE + 'echo UE_main_exec PID = $! \n' - if UE_traffic_exec != "": - cmd_traffic = UE_traffic_exec + ' ' + UE_traffic_exec_args - if cmd_traffic.find('-c') >= 0: - cmd_traffic = cmd_traffic + ' -t ' + str(timeout_cmd - 60) - task_UE = task_UE + ' ( date; ' + cmd_traffic + ' ) >' + logfile_traffic_UE + ' 2>&1 & \n' - task_UE = task_UE + 'array_exec_pid+=($!) \n' - task_UE = task_UE + 'echo UE_traffic_exec PID = $! \n' - #terminate the UE test case after timeout_cmd seconds - task_UE = task_UE + finalize_deploy_script (timeout_cmd, UE_terminate_missing_procs) + ' \n' - #task_UE = task_UE + 'sleep ' + str(timeout_cmd) + ' \n' - task_UE = task_UE + 'handle_ctrl_c' + '\n' - task_UE = task_UE + ' ) > ' + logfile_task_UE_out + ' 2>&1 ' - write_file(logfile_task_UE, task_UE, mode="w") - #task_UE = 'echo \" ' + task_UE + '\" > ' + logfile_script_UE + ' 2>&1 ; ' + task_UE - - - - - - - - # - # RUN work - # ---------------------------------------------------- - thread_eNB = oaiThread(1, "eNB_thread", eNBMachine, user, password , task_eNB, False, timeout_thread) - thread_UE = oaiThread(2, "UE_thread", UEMachine, user, password , task_UE, False, timeout_thread) - threads=[] - threads.append(thread_eNB) - threads.append(thread_UE) - thread_eNB.start() - thread_UE.start() - - run_work_inprogress_flag = True - progress_step = timeout_thread/20 - progress_count = 0 - - while (run_work_inprogress_flag): - - - update_progress(float(progress_count)/float(timeout_thread),prefix_string) - - time.sleep(progress_step) - - progress_count += progress_step - -# sys.stdout.write ('#') -# sys.stdout.flush() - - run_work_inprogress_flag = False - for t in threads: - if t.isAlive(): - run_work_inprogress_flag = True - - - update_progress(1,prefix_string) - - for t in threads: - t.join() - - - # - # - #----------------------------------------------------- - cleanOldProgramsAllMachines([oai_eNB, oai_UE] , oldprogramList, CleanUpAluLteBox, ExmimoRfStop, [logdir_eNB_run, logdir_UE_run], logdirOAI5GRepo) - - SSHSessionWrapper(eNBMachine, user, None, password, logdir_eNB_run, logdir_local_testcase, "get_all") - #print "Copying files from UEMachine : " + UEMachine + "logdir_UE = " + logdir_UE - SSHSessionWrapper(UEMachine, user, None, password, logdir_UE_run, logdir_local_testcase, "get_all") - - metric_checks_flag = 1 - - fname = logdir_local_run+ '/UE_exec' + '_' + str(run) + '_.log' - cell_synch_status = analyser.check_cell_synchro(fname) - print (Fore.WHITE + indent + "> Check Cell synchro :"), - - if cell_synch_status == 'CELL_SYNCH': - print ( Fore.GREEN + cell_synch_status) - else : - print ( Fore.RED + cell_synch_status) - metric_checks_flag = 0 - - ue_seg_fault_status = analyser.check_exec_seg_fault(fname) - if ue_seg_fault_status == 'SEG_FAULT' : - nb_seg_fault += 1 - - # - # Check metrics - #---------------------------------------------------- - runs_metrics = [] - run_traffic = [] - - if metric_checks_flag : - verdict = 'PASS' - - # UE side metrics - metricList=testcase.findall('UE_metric') - for metric in metricList: - - metric_verdict = 'PASS' - - metric_def = {} - metric_def['id'] = metric.get('id') - metric_def['description'] = metric.get('description') - metric_def['regex'] = metric.get('regex') - metric_def['unit_of_meas'] = metric.get('unit_of_meas') - metric_def['pass_fail_stat']= metric.get('pass_fail_stat') - metric_min_lim = metric.get('min_limit') - if metric_min_lim: - metric_def['min_limit'] = float(metric_min_lim) - metric_max_lim = metric.get('max_limit') - if metric_max_lim: - metric_def['max_limit'] = float(metric_max_lim) - - fname = logdir_local_run+ '/UE_exec' + '_' + str(run) + '_.log' - - args = {'metric' : metric_def, - 'file' : fname } - - metric_extracted = analyser.do_extract_metrics(args) - - print (Fore.WHITE + indent + "> Metric : "+metric_def['id']), - print ("(min="+str( metric_extracted['metric_min'])+", max="+str( metric_extracted['metric_max'])+", mean="+str( metric_extracted['metric_mean'])+", median="+str( metric_extracted['metric_median'])+")") - -# print "\t > Metric "+metric_def['id']+" :" -# print "\t\t> min = "+ str( metric_extracted['metric_min'] ) -# print "\t\t> min_index = "+ str( metric_extracted['metric_min_index'] ) -# print "\t\t> max = "+ str( metric_extracted['metric_max'] ) -# print "\t\t> max_index = "+ str( metric_extracted['metric_max_index'] ) -# print "\t\t> mean = "+ str( metric_extracted['metric_mean'] ) -# print "\t\t> median = "+ str( metric_extracted['metric_median'] ) - - if metric_def['pass_fail_stat'] : - metric_verdict = analyser.do_check_verdict(metric_def, metric_extracted) - - metric_fig = logdir_local_run+ '/UE_metric_'+ metric_def['id']+'_' + str(run) + '_.png' - analyser.do_img_metrics(metric_def, metric_extracted, metric_fig) - - - metric_fig_report = '../log/'+ testcasename + '/run_' + str(run) + '/UE_metric_'+ metric_def['id']+'_' + str(run) + '_.png' - - run_metrics = dict( metric_id = metric_def['id'], - metric_desc = metric_def['description'], - metric_uom = metric_def['unit_of_meas'], - metric_min = metric_extracted['metric_min'], - metric_min_index= metric_extracted['metric_min_index'], - metric_max = metric_extracted['metric_max'], - metric_max_index= metric_extracted['metric_max_index'], - metric_mean = metric_extracted['metric_mean'], - metric_median = metric_extracted['metric_median'], - metric_fig = metric_fig_report) - - if metric_def['pass_fail_stat'] : - run_metrics['pass_fail_stat'] = metric_def['pass_fail_stat'] - if metric_min_lim : - run_metrics['pass_fail_min_limit'] = metric_def['min_limit'] - if metric_max_lim : - run_metrics['pass_fail_max_limit'] = metric_def['max_limit'] - - runs_metrics.append(run_metrics) - - if metric_verdict != 'PASS': - verdict = metric_verdict - - # End Metrics LOOP - # --------------------- - - - # Traffic analysis - if UE_traffic_exec != "": - - fname = logdir_local_run+ '/UE_traffic' + '_' + str(run) + '_.log' - args = {'file' : fname } - traffic_metrics = analyser.do_extract_traffic_metrics(args) - traffic_fig = logdir_local_run+ '/UE_traffic'+'_' + str(run) + '_.png' - analyser.do_img_traffic(traffic_metrics, traffic_fig) - - traffic_fig_report= '../log/'+ testcasename + '/run_' + str(run) + '/UE_traffic'+'_' + str(run) + '_.png' - - dur_pass_fail_crit = 'none' - if traffic_metrics['traffic_count'] == 0 : - verdict = 'FAIL' - elif UE_search_expr_true != "": - traffic_duration_limit = float(UE_search_expr_true) - dur_pass_fail_crit = str(traffic_duration_limit) - # print 'traffic_duration_limit = '+str(traffic_duration_limit) - # print 'traffic_metrics[interval_stop_max] = '+str(traffic_metrics['interval_stop_max']) - if traffic_metrics['interval_stop_max'] < traffic_duration_limit : - verdict = 'FAIL' - - - run_traffic = dict( traffic_count = traffic_metrics['traffic_count'], - bw_min = traffic_metrics['bw_min'], - bw_max = traffic_metrics['bw_max'], - bw_mean = traffic_metrics['bw_mean'], - bw_median = traffic_metrics['bw_median'], - jitter_min = traffic_metrics['jitter_min'], - jitter_max = traffic_metrics['jitter_max'], - jitter_mean = traffic_metrics['jitter_mean'], - jitter_median = traffic_metrics['jitter_median'], - rl_min = traffic_metrics['rl_min'], - rl_max = traffic_metrics['rl_max'], - rl_mean = traffic_metrics['rl_mean'], - rl_median = traffic_metrics['rl_median'], - iperf_duration = traffic_metrics['interval_stop_max'], - dur_pass_fail_crit = dur_pass_fail_crit, - traffic_fig = traffic_fig_report ) - else: - run_traffic = dict( traffic_count = 0) - - else : - verdict = 'SKIP' - - - - # - # RUN verdict and finalization - # ---------------------------------------------------- - run_stop_time=datetime.datetime.now() - run_duration = run_stop_time-run_start_time -# print (Fore.WHITE + ("duration=" :"), - print (Fore.WHITE + indent + "> RUN duration : "+ str(run_duration) +"s" ) - - print (Fore.WHITE + indent + "> RUN verdict :"), - - if verdict == 'PASS': - nb_run_pass += 1 - print ( Fore.GREEN + verdict) - elif verdict == 'FAIL': - nb_run_failed += 1 - testcase_verdict = 'FAIL' - print ( Fore.RED + verdict) - elif verdict == 'SKIP': - nb_run_skip += 1 - print ( Fore.YELLOW + verdict) - else: - nb_run_inc += 1 - if testcase_verdict == 'PASS' : testcase_verdict = 'INCON' - print (Fore.YELLOW+'INCONCLUSIVE') - - run_results = dict( run_id=str(run), - run_start_time = run_start_time, - run_stop_time = run_stop_time , - run_verdict = verdict, - ue_seg_fault_status = ue_seg_fault_status, - run_duration = run_duration, - runs_metrics = runs_metrics, - run_traffic = run_traffic) - runs_results.append(run_results) - - # END RUN LOOP - #---------------------------------------------------- - - indent="\t" - - # Test case duration - # ---------------------------------- - testcase_time_stop = datetime.datetime.now() - print(Fore.WHITE + indent + "> testcase time stop : " + str(testcase_time_start) ), - print " -> TestCase duration = "+str(testcase_time_stop - testcase_time_start) - - # Save remote log files - # ----------------------------------- - #Now we change the permissions of the logfiles to avoid some of them being with root permissions - cmd = 'sudo -E chown -R ' + user + ' ' + logdir_eNB_testcase - res= oai_eNB.send_recv(cmd) - cmd = 'sudo -E chown -R ' + user + ' ' + logdir_UE_testcase - res= oai_UE.send_recv(cmd) - - # Save remote log files on MTC - #print "Copying files from eNBMachine " + eNBMachine + "logdir_eNB = " + logdir_eNB - SSHSessionWrapper(eNBMachine, user, None, password, logdir_eNB_testcase, openairdir_local + '/cmake_targets/autotests/log/', "get_all") - #print "Copying files from UEMachine : " + UEMachine + "logdir_UE = " + logdir_UE - SSHSessionWrapper(UEMachine, user, None, password, logdir_UE_testcase, openairdir_local + '/cmake_targets/autotests/log/', "get_all") - - oai_eNB.disconnect() - oai_UE.disconnect() - - # Set test case final verdict - # ----------------------------------- - test_result_string = 'do be completed' - - if testcase_verdict == 'PASS': - if nb_run_pass == 0 : - testcase_verdict = 'INCON' - - print(Fore.WHITE + indent + "> testcase final verdict :"), - if testcase_verdict == 'PASS': - print ( Fore.GREEN + testcase_verdict) - elif testcase_verdict == 'FAIL': - print ( Fore.RED + testcase_verdict) - else: - print (Fore.YELLOW+'INCONCLUSIVE') - - print(Style.RESET_ALL) - - duration= testcase_time_stop - testcase_time_start - - test_result = dict(testcase_name=testcasename, - testcaseclass=testcaseclass, - testcase_verdict = testcase_verdict, - testcase_time_start=testcase_time_start, - testcase_time_stop=testcase_time_stop, - tags=tags, - nruns=nb_runs, - nb_run_pass = nb_run_pass, - nb_run_skip = nb_run_skip, - nb_run_failed = nb_run_failed, - nb_run_inc=nb_run_inc, - nb_seg_fault = nb_seg_fault, - testcase_timeout=timeout_cmd, - testcase_duration = duration, - testcase_eNBMachine =eNBMachine, - testcase_UEMachine =UEMachine, - runs_results = runs_results) - test_results.append(test_result) - - xmlFile = logdir_local_testcase + '/test.' + testcasename + '.xml' - xml="\n \n" - write_file(xmlFile, xml, mode="w") - - xmlFile_ng = logdir_local_testcase + '/test.' + testcasename + '_ng.xml' - xml_ng = xmlify(test_result, wrap=testcasename, indent=" ") - write_file(xmlFile_ng, xml_ng, mode="w") - - - - return testcase_verdict - - - - -# \brief This function searches if test case is present in list of test cases that need to be executed by user -# \param testcasename the test case to search for -# \param testcasegroup list that is passed from the arguments -# \param test_case_exclude list of test cases excluded from execution (specified in test_case_list.xml) -def search_test_case_group(testcasename, testcasegroup, test_case_exclude): - - if test_case_exclude != "": - testcase_exclusion_list=test_case_exclude.split() - for entry in testcase_exclusion_list: - if entry.find('+') >=0: - match = re.search(entry, testcasename) - if match: - #print "\nSkipping test case as it is found in black list: " + testcasename - return False - else: - match = entry.find(testcasename) - if match >=0: - #print "\nSkipping test case as it is found in black list: " + testcasename - return False - if testcasegroup == '': - return True - else: - testcaselist = testcasegroup.split() - for entry in testcaselist: - if entry.find('+') >=0: - match = re.search(entry, testcasename) - if match: - return True - else: - match = testcasename.find(entry) - if match >=0: - return True - return False - -# \brief thread that cleans up remote machines from pre-existing test case executions -# \param threadID number of thread (for book keeping) -# \param threadname name of thread (for book keeping) -# \param oai handler that can be used to execute programs on remote machines -# \param CleanUpOldProgs list of programs which must be terminated before running a test case (specified in test_case_list.xml) -# \param CleanupAluLteBox string that contains commands to stop ALU Bell Labs LTEBox (specified in test_case_list.xml) -# \param ExmimoRfStop command to stop EXMIMO Card -class oaiCleanOldProgramThread (threading.Thread): - def __init__(self, threadID, threadname, oai, CleanUpOldProgs, CleanUpAluLteBox, ExmimoRfStop, logdir, logdirOAI5GRepo): - threading.Thread.__init__(self) - self.threadID = threadID - self.threadname = threadname - self.oai = oai - self.CleanUpOldProgs = CleanUpOldProgs - self.CleanUpAluLteBox = CleanUpAluLteBox - self.ExmimoRfStop = ExmimoRfStop - self.logdir = logdir - self.logdirOAI5GRepo = logdirOAI5GRepo - def run(self): - try: - cleanOldPrograms(self.oai, self.CleanUpOldProgs, self.CleanUpAluLteBox, self.ExmimoRfStop, self.logdir, self.logdirOAI5GRepo) - except Exception, e: - error='' - error = error + ' In class oaiCleanOldProgramThread, function: ' + sys._getframe().f_code.co_name + ': *** Caught exception: ' + str(e.__class__) + " : " + str( e) - error = error + '\n threadID = ' + str(self.threadID) + '\n threadname = ' + self.threadname + '\n CleanUpOldProgs = ' + self.CleanUpOldProgs + '\n CleanUpAluLteBox = ' + self.CleanUpAluLteBox + '\n ExmimoRfStop = ' + self.ExmimoRfStop + '\n' - error = error + traceback.format_exc() - print error - print "There is error in cleaning up old programs....." - #sys.exit(1) - -# \brief Run parallel threads in all machines for clean up old execution of test cases -# \param oai_list list of handlers that can be used to execute programs on remote machines -# \param CleanUpOldProgs list of programs which must be terminated before running a test case (specified in test_case_list.xml) -# \param CleanupAluLteBox string that contains commands to stop ALU Bell Labs LTEBox (specified in test_case_list.xml) -# \param ExmimoRfStop command to stop EXMIMO Card -def cleanOldProgramsAllMachines(oai_list, CleanOldProgs, CleanUpAluLteBox, ExmimoRfStop, logdir_list, logdirOAI5GRepo): - threadId=0 - threadList=[] - index=0 - if len(oai_list)!=len(logdir_list) : - logdir_list=[logdir[0]]*len(oai_list) - - for oai in oai_list: - threadName="cleanup_thread_"+str(threadId) - thread=oaiCleanOldProgramThread(threadId, threadName, oai, CleanUpOldProgs, CleanUpAluLteBox, ExmimoRfStop, logdir_list[index],logdirOAI5GRepo) - threadList.append(thread) - thread.start() - threadId = threadId + 1 - index = index+1 - for t in threadList: - t.join() - - -debug = 0 -pw ='' -i = 0 -dlsim=0 -localshell=0 -GitOAI5GRepo='' -GitOAI5GRepoBranch='' -GitOAI5GHeadVersion='' -user='' -pw='' -testcasegroup='' -NFSResultsShare='' -cleanUpRemoteMachines=False -openairdir_local = os.environ.get('OPENAIR_DIR') -if openairdir_local is None: - print "Environment variable OPENAIR_DIR not set correctly" - sys.exit() -locallogdir = openairdir_local + '/cmake_targets/autotests/log' -reportdir = openairdir_local + '/cmake_targets/autotests/report' -MachineList = '' -MachineListGeneric='' -MachineDescDic={} -flag_remove_logdir=False -flag_start_testcase=False -nruns_lte_softmodem='' -flag_skip_git_head_check=False -flag_skip_oai_install=False -flag_skip_machine_preparation=False -flag_skip_sanity_check=False -Timeout_cmd='' -xmlInputFile='' - -#print "Number of arguments argc = " + str(len(sys.argv)) -#for index in range(1,len(sys.argv) ): -# print "argv_" + str(index) + " : " + sys.argv[index] - -oai_list = [] - - -i=1 -while i < len (sys.argv): - arg=sys.argv[i] - if arg == '-r': - flag_remove_logdir=True - elif arg == '-s' : - flag_start_testcase=True - elif arg == '-g' : - testcasegroup = sys.argv[i+1].replace("\"","") - i = i +1 - elif arg == '-c': - cleanUpRemoteMachines=True - elif arg == '-5GRepo': - GitOAI5GRepo = sys.argv[i+1] - i = i +1 - elif arg == '-5GRepoBranch': - GitOAI5GRepoBranch = sys.argv[i+1] - i = i +1 - elif arg == '-5GRepoHeadVersion': - GitOAI5GHeadVersion = sys.argv[i+1] - #We now find the branch that corresponds to this Git Head Commit - cmd = "git show-ref --head " + " | grep " + GitOAI5GHeadVersion - cmd_out = subprocess.check_output ([cmd], shell=True) - cmd_out=cmd_out.replace("\n","") - cmd_out = cmd_out.split('/') - GitOAI5GRepoBranch = cmd_out[-1] - if GitOAI5GRepoBranch == '': - print "Error extracting GitBranch from head commit. Exiting now..." - sys.exit(1) - i = i +1 - elif arg == '-u': - user = sys.argv[i+1] - i = i +1 - elif arg == '-p': - pw = sys.argv[i+1] - i = i +1 - elif arg == '-n': - NFSResultsShare = sys.argv[i+1] - i = i +1 - elif arg == '--nrun_lte_softmodem': - nruns_lte_softmodem = sys.argv[i+1] - i = i +1 - elif arg == '-MachineList': - MachineList = sys.argv[i+1] - MachineList = MachineList.replace("\"","") - MachineList = MachineList.replace("\'","") - i = i +1 - elif arg == '-MachineListGeneric': - MachineListGeneric = sys.argv[i+1] - MachineListGeneric = MachineListGeneric.replace("\"","") - MachineListGeneric = MachineListGeneric.replace("\'","") - i = i +1 - elif arg == '--skip-git-head-check': - flag_skip_git_head_check=True - elif arg == '--timeout_cmd': - Timeout_cmd = sys.argv[i+1] - i = i +1 - elif arg == '--skip-oai-install': - flag_skip_oai_install=True - elif arg == '--skip-machine-preparation': - flag_skip_machine_preparation=True - elif arg == '--skip-sanity-check': - flag_skip_sanity_check=True - elif arg == '--test-suite' : - xmlInputFile = sys.argv[i+1] - i = i +1 - elif arg == '-h' : - print "-s: This flag *MUST* be set to start the test cases" - print "-r: Remove the log directory in autotests" - print "-g: Run test cases in a group" - print "-c: Run cleanup scripts on remote machines and exit" - print "-5GRepo: Repository for OAI 5G to use to run tests (overrides GitOAI5GRepo in test_case_list.xml)" - print "-5GRepoBranch: Branch for OAI 5G Repository to run tests (overrides the branch in test_case_list.xml)" - print "-5GRepoHeadVersion: Head commit on which to run tests (overrides the branch in test_case_list.xml)" - print "-u: use the user name passed as argument" - print "-p: use the password passed as an argument" - print "-n: Set the NFS share passed as an argument" - print "--nrun_lte_softmodem: Set the number of runs for lte-softmodem test case class" - print "-MachineList : overrides the MachineList parameter in test_case_list.xml" - print "-MachineListGeneric : overrides the MachineListGeneric parameter in test_case_list.xml" - print "--skip-git-head-check: skip checking of GitHead remote/local branch (only for debugging)" - print "--timeout_cmd: Override the default parameter (timeout_cmd) in test_case_list.xml. This parameter is in seconds and should be > 120" - print "--skip-oai-install: Skips the openairinterface5g installer" - print "--skip-machine-preparation: skipp the whole system preparation -> direct to test cases" - print "--skip-sanity-check: skipp the machine sanity checks" - print "--test-suite: Select a XML test-suite file" - sys.exit() - else : - print "Unrecongnized Option: <" + arg + ">. Use -h to see valid options" - sys.exit() - i= i + 1 - -logdir = '/tmp/' + 'OAITestFrameWork-' + user + '/' -logdirOAI5GRepo = logdir + 'openairinterface5g/' -logdirOpenaircnRepo = logdir + 'openair-cn/' -patchdir = logdirOAI5GRepo + 'cmake_targets/autotests/patches/' -NFSResultsDir = '/mnt/sradio' -cleanupOldProgramsScript = '$OPENAIR_DIR/cmake_targets/autotests/tools/remove_old_programs.bash' - -#Now we parse the xml file for basic configuration -xmlTree = ET.parse(xmlInputFile) -xmlRoot = xmlTree.getroot() - -# -# Read test session configuration -# --------------------------------------------------------------------------------- -print (Fore.YELLOW + '\nStep 0.1 - Read test session configuration') -print (Fore.YELLOW + '-------------------------------------------------') - -test_session_start_time = datetime.datetime.now() -print (Fore.WHITE + ' - start time : '+ str(test_session_start_time)) - -host = os.uname()[1] -print (Fore.WHITE + ' - MTC host : '+host) - - -if user=='': - user = getpass.getuser() -print (Fore.WHITE + ' - user : '+user) - -if pw=='': - pw = getpass.getpass() -print (Fore.WHITE + ' - password : '+pw) - -print (Fore.WHITE + ' - cmd line flags : ') -print (Fore.WHITE + ' + -s : '+str(flag_start_testcase)) -print (Fore.WHITE + ' + -r : '+str(flag_remove_logdir)) -print (Fore.WHITE + ' + -c : '+str(cleanUpRemoteMachines)) -print (Fore.WHITE + ' + --skip-git-head-check : '+str(flag_skip_git_head_check)) -print (Fore.WHITE + ' + --skip-oai-install : '+str(flag_skip_oai_install)) -print (Fore.WHITE + ' + --skip-machine-preparation : '+str(flag_skip_machine_preparation)) -print (Fore.WHITE + ' + --skip-sanity-check : '+str(flag_skip_sanity_check)) - - -print (Fore.WHITE + ' - Test setup basic config : (* -> overwrite by cmd line parameter)') -print (Fore.WHITE + ' + test setup config file : '+str(xmlInputFile)) -print (Fore.WHITE + ' + remote setup dir : '+str(logdir)) -print (Fore.WHITE + ' + remote OAI5G repo : '+str(logdirOAI5GRepo)) -print (Fore.WHITE + ' + remote OpenAirCN repo : '+str(logdirOpenaircnRepo)) - - -if MachineList =='': - MachineList = xmlRoot.findtext('MachineList',default='') -NFSResultsShare = xmlRoot.findtext('NFSResultsShare',default='') -GitOpenaircnRepo = xmlRoot.findtext('GitOpenair-cnRepo',default='') - -if GitOAI5GRepo == '': - GitOAI5GRepo = xmlRoot.findtext('GitOAI5GRepo',default='') - -if GitOAI5GRepoBranch == '': - GitOAI5GRepoBranch = xmlRoot.findtext('GitOAI5GRepoBranch',default='') -if GitOAI5GHeadVersion == '': - GitOAI5GHeadVersion = xmlRoot.findtext('GitOAI5GHeadVersion',default='') - -GitOpenaircnRepoBranch = xmlRoot.findtext('GitOpenair-cnRepoBranch',default='') -CleanUpOldProgs = xmlRoot.findtext('CleanUpOldProgs',default='') -CleanUpAluLteBox = xmlRoot.findtext('CleanUpAluLteBox',default='') -Timeout_execution = int (xmlRoot.findtext('Timeout_execution')) -if MachineListGeneric == '': - MachineListGeneric = xmlRoot.findtext('MachineListGeneric',default='') -TestCaseExclusionList = xmlRoot.findtext('TestCaseExclusionList',default='') -ExmimoRfStop = xmlRoot.findtext('ExmimoRfStop',default='') -if nruns_lte_softmodem == '': - nruns_lte_softmodem = xmlRoot.findtext('nruns_lte-softmodem',default='') - -print (Fore.WHITE + ' + MachineList : '+ MachineList) -print (Fore.WHITE + ' + GitOpenair-cnRepo : '+ GitOpenaircnRepo) -print (Fore.WHITE + ' + GitOAI5GRepo : '+ GitOAI5GRepo) -print (Fore.WHITE + ' + GitOAI5GBranch : '+ GitOAI5GRepoBranch) -print (Fore.WHITE + ' + GitOpenaircnRepoBranch : '+ GitOpenaircnRepoBranch) -print (Fore.WHITE + ' + NFSResultsShare : '+ NFSResultsShare) -print (Fore.WHITE + ' + nruns_lte_softmodem : '+ nruns_lte_softmodem) -print (Fore.WHITE + ' + Timeout_cmd : '+ Timeout_cmd) - - -if GitOAI5GHeadVersion == '': - cmd = "git log --pretty=format:\'%H\' -n 1" # origin/"+ GitOAI5GRepoBranch -# cmd = "git show-ref --heads -s "+ GitOAI5GRepoBranch - GitOAI5GHeadVersion = subprocess.check_output ([cmd], shell=True) - GitOAI5GHeadVersion=GitOAI5GHeadVersion.replace("\n","") - - # Print commiter and date : git log -1 --pretty=format:"%an %ad" - -print (Fore.WHITE + ' + GitOAI5GHeadVersion : '+ GitOAI5GHeadVersion) -#print "CleanUpOldProgs = " + CleanUpOldProgs -print (Fore.WHITE + ' + Timeout_execution (s) : '+ str(Timeout_execution)) - -if GitOAI5GHeadVersion == '': - print "Error getting the OAI5GBranch Head version...Exiting" - sys.exit() - -NFSTestsResultsDir = NFSResultsShare + '/'+ GitOAI5GRepoBranch + '/' + GitOAI5GHeadVersion - -#print "NFSTestsResultsDir = " + NFSTestsResultsDir - -OAI5GpatchFileList=xmlRoot.findall('OAI5GPatchFile') - - - -MachineList = MachineList.split() -MachineListGeneric = MachineListGeneric.split() - - -MachineDescDic - - -# -# 'Check Mater Test Controller sanity (MTC)' -# --------------------------------------------------------------------------------- -print (Fore.YELLOW + '\nStep 0.2 - Check Mater Test Controller sanity (MTC)') -print (Fore.YELLOW + '-------------------------------------------------') - -try: - print (Fore.WHITE + ' - check OpenAirInterface environment variable OPENAIR1_DIR... '), - os.environ["OPENAIR1_DIR"] -except KeyError: - print (Fore.RED + 'FAILED') - print "Please set the environment variable OPENAIR1_DIR in the .bashrc or run 'source oaienv' " - exit_prog(1) -print (Fore.GREEN + 'OK') - -try: - print (Fore.WHITE + ' - check OpenAirInterface environment variable OPENAIR2_DIR... '), - os.environ["OPENAIR2_DIR"] -except KeyError: - print (Fore.RED + 'FAILED') - print "Please set the environment variable OPENAIR2_DIR in the .bashrc or run 'source oaienv' " - exit_prog(1) -print (Fore.GREEN + 'OK') - -try: - os.environ["OPENAIR_TARGETS"] -except KeyError: - print "Please set the environment variable OPENAIR_TARGETS in the .bashrc or run 'source oaienv' " - sexit_prog(1) - -print (Fore.WHITE + ' - kill zombie ssh sessions from earlier sessions... '), -cmd='ps aux |grep \"/usr/bin/ssh -q -l ' + user + '\"| tr -s \" \" :| cut -f 2 -d :| xargs kill -9 ' -os.system(cmd) -print (Fore.GREEN + 'DONE') - -if flag_start_testcase == False: - print "You need to start the testcase by passing option -s. Use -h to see all options. Aborting now..." - exit_prog(1) - - -#print "Killing zombie ssh sessions from earlier sessions..." -#cmd='ps aux |grep \"/usr/bin/ssh -q -l guptar\"|tr -s \" \" :|cut -f 2 -d :|xargs kill -9 ' -#cmd = cmd + '; ps aux |grep \"/usr/bin/ssh -q -l ' + user + '\"| tr -s \" \" :| cut -f 2 -d :| xargs kill -9 ' -#os.system(cmd) -#print cmd - -try: - analyser = __import__("lib_autotest_analyser") -except ImportError as err: - print('Import error: ' + str(err)) - exit(0) - -if flag_remove_logdir == True: - print "Removing directory: " + locallogdir - os.system(' rm -fr ' + locallogdir + '; mkdir -p ' + locallogdir ) - -if not os.path.exists(locallogdir): - os.system('mkdir -p ' + locallogdir ) - - -paramiko_logfile = os.path.expandvars('$OPENAIR_DIR/cmake_targets/autotests/log/paramiko.log') -res=os.system(' echo > ' + paramiko_logfile) -paramiko.util.log_to_file(paramiko_logfile) - - -# -# 'REMOTE MACHINE SANITY CHEKS' -# --------------------------------------------------------------------------------- -print (Fore.YELLOW + '\nStep 0.3 - REMOTE MACHINE SANITY CHEKS') -print (Fore.YELLOW + '-------------------------------------------------') - - -for machine in MachineList: - oai_list.append( openair('localdomain',machine)) - MachineDescDic[machine]={} - - -if not flag_skip_sanity_check: - - if localshell == 0: - try: - index=0 - for machine in MachineList: - print (Fore.WHITE + " - Check sanity for remote machine "+machine) - - oai_list[index].connect(user,pw) - print (Fore.WHITE + " > Checking for sudo permissions for user "+user+ " : "), - result = oai_list[index].send_expect_false('sudo -S -v','may not run sudo',True) - if (result == 'OK'): - print (Fore.GREEN + result ) - else: - print (Fore.RED + result ) - - print (Fore.WHITE + " > Cleaning Older running programs : "), - cleanOldPrograms(oai_list[index], CleanUpOldProgs, CleanUpAluLteBox, ExmimoRfStop, '$HOME', '/tmp') - print (Fore.WHITE + " Done") - - #result = oai_list[index].send('mount ' + NFSResultsDir, True) - #print "Mounting NFS Share " + NFSResultsDir + "..." + result - - # Check if NFS share is mounted correctly. - #print 'Checking if NFS Share<' + NFSResultsDir + '> is mounted correctly...' - #cmd = 'if grep -qs '+NFSResultsDir+ ' /proc/mounts; then echo \'' + NFSResultsDir + ' is mounted\' ; fi' - #search_expr = NFSResultsDir + ' is mounted' - #print "cmd = " + cmd - #print "search_expr = " + search_expr - #result = oai_list[index].send_expect(cmd, search_expr) - #print "Mount NFS_Results_Dir..." + result - index = index + 1 - - #oai.connect2(user,pw) - #oai.get_shell() - except : - print 'Fail to connect to the machine: '+ machine - sys.exit(1) - else: - pw = '' - oai_list[0].connect_localshell() -else: - print (Fore.RED + " Skipping Machine sanity check...") - - -# -# 'REMOTE MACHINE TEST SETUP CONFIGURATION' -# --------------------------------------------------------------------------------- -print (Fore.YELLOW + '\nStep 0.4 - REMOTE MACHINE PREPARATION') -print (Fore.YELLOW + '-------------------------------------------------') - -if not flag_skip_machine_preparation: - index=0 - threads_init_setup=[] - for oai in oai_list: - try: - print "setting up machine: " + MachineList[index] - #print oai_list[oai].send_recv('echo \''+pw+'\' |sudo -S -v') - #print oai_list[oai].send_recv('sudo su') - #print oai_list[oai].send_recv('who am i') - #cleanUpPrograms(oai_list[oai] - cmd = 'sudo -S -E rm -fr ' + logdir + ' ; mkdir -p ' + logdir - result = oai.send_recv(cmd) - print cmd - - setuplogfile = logdir + '/setup_log_' + MachineList[index] + '_.txt' - setup_script = locallogdir + '/setup_script_' + MachineList[index] + '_.txt' - - #Sometimes git fails so the script below retries in that case - localfile = os.path.expandvars('$OPENAIR_DIR/cmake_targets/autotests/tools/git-retry.sh') - remotefile = logdir + '/git-retry.sh' - paramList=[] - port=22 - paramList.append ( {"operation":'put', "localfile":localfile, "remotefile":remotefile} ) - sftp_log = os.path.expandvars(locallogdir + '/sftp_module.log') - sftp_module (user, pw, MachineList[index], port, paramList, sftp_log) - - cmd = ' ( \n' - #cmd = cmd + 'rm -fR ' + logdir + '\n' - #cmd = cmd + 'mkdir -p ' + logdir + '\n' - cmd = cmd + 'cd '+ logdir + '\n' - cmd = cmd + 'sudo apt-get install -y git \n' - cmd = cmd + 'chmod 700 ' + logdir + '/git-retry.sh \n' - cmd = cmd + logdir + '/git-retry.sh clone '+ GitOAI5GRepo +' \n' - cmd = cmd + logdir + '/git-retry.sh clone '+ GitOpenaircnRepo + ' \n' - cmd = cmd + 'cd ' + logdirOAI5GRepo + '\n' - cmd = cmd + 'git checkout ' + GitOAI5GRepoBranch + '\n' - if GitOAI5GHeadVersion : - cmd = cmd + 'git checkout ' + GitOAI5GHeadVersion + '\n' - cmd = cmd + 'git_head=`git ls-remote |grep \'' + GitOAI5GRepoBranch + '\'` \n' - cmd = cmd + 'git_head=($git_head) \n' - cmd = cmd + 'git_head=${git_head[0]} \n' - cmd = cmd + 'echo \"GitOAI5GHeadVersion_remote = $git_head\" \n' - cmd = cmd + 'echo \"GitOAI5GHeadVersion_local = ' + GitOAI5GHeadVersion + '\" \n' - if flag_skip_git_head_check==True: - cmd = cmd + 'echo \"skipping GitHead check...\" \n ' - else: - cmd = cmd + 'if [ \"$git_head\" != \"'+ GitOAI5GHeadVersion + '\" ]; then echo \"error: Git openairinterface5g head version does not match\" ; fi \n' - cmd = cmd + 'source oaienv' + '\n' - if flag_skip_oai_install == False: - cmd = cmd + 'source $OPENAIR_DIR/cmake_targets/tools/build_helper \n' - cmd = cmd + 'echo \"Installing core OAI dependencies...Start\" \n' - cmd = cmd + '$OPENAIR_DIR/cmake_targets/build_oai -I --install-optional-packages \n' - cmd = cmd + 'echo \"Installing core OAI dependencies...Finished\" \n' - #cmd = cmd + 'echo \"Installing BLADERF OAI dependencies...Start\" \n' - #cmd = cmd + 'check_install_bladerf_driver \n' - #cmd = cmd + 'echo \"Installing BLADERF OAI dependencies...Finished\" \n' - #cmd = cmd + 'echo \"Installing USRP OAI dependencies...Start\" \n' - #cmd = cmd + 'check_install_usrp_uhd_driver \n' - #cmd = cmd + 'echo \"Installing USRP OAI dependencies...Finished\" \n' - cmd = cmd + 'cd ' + logdirOpenaircnRepo + '\n' - cmd = cmd + 'git checkout ' + GitOpenaircnRepoBranch + '\n' - cmd = cmd + 'env |grep OPENAIR' + '\n' - cmd = cmd + ' cd ' + logdir + '\n' - cmd = cmd + 'mkdir -p ' + patchdir + '\n' - cmd = cmd + ' ) > ' + setuplogfile + ' 2>&1 \n' - #cmd = cmd + 'echo \' ' + cmd + '\' > ' + setup_script + ' 2>&1 \n ' - #result = oai_list[index].send_recv(cmd, False, 300 ) - write_file(setup_script, cmd, mode="w") - tempThread = oaiThread(index, 'thread_setup_'+str(index)+'_' + MachineList[index] , MachineList[index] , user, pw, cmd, False, 3000) - threads_init_setup.append(tempThread ) - tempThread.start() - index = index + 1 - except Exception, e: - print 'There is error in one of the commands to setup the machine '+ MachineList[index] - error='' - error = error + ' In function: ' + sys._getframe().f_code.co_name + ': *** Caught exception: ' + str(e.__class__) + " : " + str( e) - error = error + traceback.format_exc() - print error - sys.exit(1) - - #Now we wait for all the threads to complete - index = 0 - for t in threads_init_setup: - t.join() - - port = 22 - paramList=[] - sftp_log = os.path.expandvars(locallogdir + '/sftp_module.log') - - #Now we copy patch files and apply them - print( Fore.WHITE + " - Installating patch files on machine " + MachineList[index]) - for patchFile in OAI5GpatchFileList: - localfile = os.path.expandvars('$OPENAIR_DIR/cmake_targets/autotests/patches/')+patchFile.get('name') - remotefile = logdirOAI5GRepo + '/cmake_targets/autotests/patches/'+patchFile.get('name') - if patchFile.get('machine') == MachineList[index] or patchFile.get('machine') == None: - if os.path.isfile(localfile): - print( Fore.WHITE + "\t> PATCH FILE :"+localfile) - paramList=[] - paramList.append ( {"operation":'put', "localfile":localfile, "remotefile":remotefile} ) - sftp_module (user, pw, MachineList[index], port, paramList, sftp_log) - cmd = ' cd ' + logdirOAI5GRepo + ' ;git apply cmake_targets/autotests/patches/'+patchFile.get('name') - res = oai_list[index].send_recv(cmd) - #print res - - paramList=[] - - setuplogfile = logdir + '/setup_log_' + MachineList[index] + '_.txt' - setup_script = locallogdir + '/setup_script_' + MachineList[index] + '_.txt' - localfile = locallogdir + '/setup_log_' + MachineList[index] + '_.txt' - remotefile = logdir + '/setup_log_' + MachineList[index] + '_.txt' - sftp_log = os.path.expandvars(locallogdir + '/sftp_module.log') - paramList.append ( {"operation":'get', "localfile":localfile, "remotefile":remotefile} ) - #sftp_module (user, pw, MachineList[index], port, localfile, remotefile, sftp_log, "get") - - #Now we copy test_case_list.xml on the remote machines - localfile = os.path.expandvars('$OPENAIR_DIR/cmake_targets/autotests/test_case_list.xml') - remotefile = logdirOAI5GRepo + '/cmake_targets/autotests/test_case_list.xml' - # paramList.append ( {"operation":'put', "localfile":localfile, "remotefile":remotefile} ) - # sftp_module (user, pw, MachineList[index], port, paramList, sftp_log) - - sftp_module (user, pw, MachineList[index], port, paramList, sftp_log) - - - cmd = ' cd ' + logdirOAI5GRepo + ' ; source oaienv ; env|grep OPENAIR \n' - res = oai_list[index].send_recv(cmd) - index = index +1 - if os.path.exists(localfile) == 0: - print "Setup log file <" + localfile + "> missing for machine <" + MachineList[index] + ">. Please check the setup log files. Exiting now" - sys.exit(1) - - #Now we process all the test cases - #Now we check if there was error in setup files - - status, out = commands.getstatusoutput('grep ' + ' -il \'error\' ' + locallogdir + '/setup_log*') - if (out != '') : - print "There is error in setup of machines" - print "status = " + str(status) + "\n Check files for error = " + out - print "Exiting now..." - sys.exit(1) - - cleanOldProgramsAllMachines(oai_list, CleanUpOldProgs, CleanUpAluLteBox, ExmimoRfStop, '$HOME' , logdirOAI5GRepo) - if cleanUpRemoteMachines == True: - print "Error while cleaning Remote machines" - print "Exiting now..." - sys.exit(0) - - -else: - print (Fore.RED + " Skipping Machine preparation...") - -# ************************************************************************** -# ************************************************************************** -# STEP 2 - TEST SELECTION AND PARAMETRIZATION -# ************************************************************************** -# ************************************************************************** - -print (Fore.YELLOW + '\nStep 2 - TEST SELECTION') -print (Fore.YELLOW + '-------------------------------------------------') - -print (Fore.WHITE + " Parsing test case list for test selection...") -print (Fore.WHITE + " - TestCaseExclusionList : "+TestCaseExclusionList) -print (Fore.WHITE + " - testcasegroup : "+testcasegroup) - - - - -testcaseList=xmlRoot.findall('testCase') - -nb_total_testcases = 0 -nb_total_testcases_softmodem = 0 -nb_total_testcases_softmodem_noS1 = 0 -nb_total_testcases_compilation = 0 -nb_total_testcases_execution = 0 - -nb_run_testcases = 0 -nb_run_testcases_softmodem = 0 -nb_run_testcases_softmodem_noS1 = 0 -nb_run_testcases_compilation = 0 -nb_run_testcases_execution = 0 - - -for testcase in testcaseList: - try: - testcasename = testcase.get('id') - testcaseclass = testcase.findtext('class',default='') - desc = testcase.findtext('desc',default='') - nb_total_testcases+=1 - - run_flag = search_test_case_group(testcasename, testcasegroup, TestCaseExclusionList) - if (run_flag): - nb_run_testcases+=1 - - if testcaseclass == 'lte-softmodem' : - nb_total_testcases_softmodem+=1 - if (run_flag): nb_run_testcases_softmodem+=1 - elif testcaseclass == 'lte-softmodem-noS1': - nb_total_testcases_softmodem_noS1+=1 - if (run_flag): nb_run_testcases_softmodem_noS1+=1 - elif testcaseclass == 'compilation': - nb_total_testcases_compilation+=1 - if (run_flag): nb_run_testcases_compilation+=1 - elif testcaseclass == 'execution': - nb_total_testcases_execution+=1 - if (run_flag): nb_run_testcases_execution+=1 - else : - print "Unknown test case class: " + testcaseclass - sys.exit() - - except Exception, e: - error='' - error = error + ' In function: ' + sys._getframe().f_code.co_name + ': *** Caught exception: ' + str(e.__class__) + " : " + str( e) - error = error + '\n testcasename = ' + testcasename + '\n testcaseclass = ' + testcaseclass + '\n desc = ' + 'desc' + '\n' - error = error + traceback.format_exc() - print error - print "Continuing to next test case..." - -print (Fore.WHITE + " Parsing done...") - -print (Fore.WHITE + " - Total number of test cases : "+str(nb_total_testcases)) -print (Fore.WHITE + " - Total number class softmodem : "+str(nb_total_testcases_softmodem)) -print (Fore.WHITE + " - Total number class softmodem-noS1 : "+str(nb_total_testcases_softmodem_noS1)) -print (Fore.WHITE + " - Total number class compilation : "+str(nb_total_testcases_compilation)) -print (Fore.WHITE + " - Total number class execution : "+str(nb_total_testcases_execution)) -print -print (Fore.WHITE + " - Selected number of test cases : "+str(nb_run_testcases)) -print (Fore.WHITE + " - Selected class softmodem : "+str(nb_run_testcases_softmodem)) -print (Fore.WHITE + " - Selected class softmodem_noS1 : "+str(nb_run_testcases_softmodem_noS1)) -print (Fore.WHITE + " - Selected class compilation : "+str(nb_run_testcases_compilation)) -print (Fore.WHITE + " - Selected class execution : "+str(nb_run_testcases_execution)) - -# ************************************************************************** -# ************************************************************************** -# STEP 3 - TEST CAMPAIGNS -# ************************************************************************** -# ************************************************************************** - -test_results = [] - - -print (Fore.YELLOW + '\nStep 3 - TEST CAMPAIGNS') -print (Fore.YELLOW + '-------------------------------------------------') - -print (Fore.WHITE + " Start test campaign...") - -run_count = 0 -for testcase in testcaseList: - try: - testcasename = testcase.get('id') - testcaseclass = testcase.findtext('class',default='') - desc = testcase.findtext('desc',default='') - #print "Machine list top level = " + ','.join(MachineList) - - if search_test_case_group(testcasename, testcasegroup, TestCaseExclusionList) == True: - run_count+=1 - print (Fore.WHITE + " ("+str(run_count).zfill(3)+"/"+str(nb_run_testcases).zfill(3)+") - test case "+testcasename+" : "), - if testcaseclass == 'lte-softmodem' : - eNBMachine = testcase.findtext('eNB',default='') - UEMachine = testcase.findtext('UE',default='') - EPCMachine = testcase.findtext('EPC',default='') - #index_eNBMachine = MachineList.index(eNBMachine) - #index_UEMachine = MachineList.index(UEMachine) - #index_EPCMachine = MachineList.index(EPCMachine) - if (eNBMachine not in MachineList)|(UEMachine not in MachineList)|(UEMachine not in MachineList): - print "One of the machines is not in the machine list" - print "eNBMachine : " + eNBMachine + "UEMachine : " + UEMachine + "EPCMachine : " + EPCMachine + "MachineList : " + ','.join(MachineList) - print "testcasename = " + testcasename + " class = " + testcaseclass - threadListGlobal = wait_testcaseclass_generic_threads(threadListGlobal, Timeout_execution) - #cleanOldProgramsAllMachines(oai_list, CleanUpOldProgs, CleanUpAluLteBox, ExmimoRfStop) - handle_testcaseclass_softmodem (testcase, CleanUpOldProgs, logdirOAI5GRepo, logdirOpenaircnRepo, MachineList, user, pw, CleanUpAluLteBox, ExmimoRfStop, nruns_lte_softmodem, Timeout_cmd ) - - #The lines below are copied from below to trace the failure of some of the machines in test setup. These lines below need to be removed in long term - print "Creating xml file for overall results..." - cmd = "cat $OPENAIR_DIR/cmake_targets/autotests/log/*/*.xml > $OPENAIR_DIR/cmake_targets/autotests/log/results_autotests.xml " - res=os.system(cmd) - os.system('sync') - print "Now copying files to NFS Share" - oai_localhost = openair('localdomain','localhost') - oai_localhost.connect(user,pw) - cmd = ' mkdir -p ' + NFSTestsResultsDir - res = oai_localhost.send_recv(cmd) - - print "Copying files from GilabCI Runner Machine : " + host + " .locallogdir = " + locallogdir + ", NFSTestsResultsDir = " + NFSTestsResultsDir - SSHSessionWrapper('localhost', user, None, pw , NFSTestsResultsDir , locallogdir, "put_all") - oai_localhost.disconnect() - - elif testcaseclass == 'lte-softmodem-noS1' : - eNBMachine = testcase.findtext('eNB',default='') - UEMachine = testcase.findtext('UE',default='') - if (eNBMachine not in MachineList)|(UEMachine not in MachineList): - print "One of the machines is not in the machine list" - print "eNBMachine : " + eNBMachine + "UEMachine : " + UEMachine + "MachineList : " + ','.join(MachineList) - print "testcasename = " + testcasename + " class = " + testcaseclass - threadListGlobal = wait_testcaseclass_generic_threads(threadListGlobal, Timeout_execution) - - handle_testcaseclass_softmodem_noS1 (testcase, CleanUpOldProgs, logdirOAI5GRepo, logdirOpenaircnRepo, MachineList, user, pw, CleanUpAluLteBox, ExmimoRfStop, nruns_lte_softmodem, Timeout_cmd ) - - #The lines below are copied from below to trace the failure of some of the machines in test setup. These lines below need to be removed in long term - print "Creating xml file for overall results..." - cmd = "cat $OPENAIR_DIR/cmake_targets/autotests/log/*/*.xml > $OPENAIR_DIR/cmake_targets/autotests/log/results_autotests.xml " - res=os.system(cmd) - os.system('sync') - - elif (testcaseclass == 'compilation'): - threadListGlobal = handle_testcaseclass_generic (testcasename, threadListGlobal, CleanUpOldProgs, logdirOAI5GRepo, MachineListGeneric, user, pw, CleanUpAluLteBox,Timeout_execution, ExmimoRfStop) - elif (testcaseclass == 'execution'): - threadListGlobal = handle_testcaseclass_generic (testcasename, threadListGlobal, CleanUpOldProgs, logdirOAI5GRepo, MachineListGeneric, user, pw, CleanUpAluLteBox, Timeout_execution, ExmimoRfStop) - else : - print "Unknown test case class: " + testcaseclass - sys.exit() - - except Exception, e: - error='' - error = error + ' In function: ' + sys._getframe().f_code.co_name + ': *** Caught exception: ' + str(e.__class__) + " : " + str( e) - error = error + '\n testcasename = ' + testcasename + '\n testcaseclass = ' + testcaseclass + '\n desc = ' + 'desc' + '\n' - error = error + traceback.format_exc() - print error - print "Continuing to next test case..." - #sys.exit(1) - - -print "Exiting the test cases execution now. Waiting for existing threads to complete..." - -for param in threadListGlobal: - thread_id = param["thread_id"] - thread_id.join() - - -# ************************************************************************** -# ************************************************************************** -# STEP 4 - TEST REPORT PRODUCTION -# ************************************************************************** -# ************************************************************************** - - - -test_session_stop_time = datetime.datetime.now() - -print (Fore.YELLOW + '\nStep 4 - TEST REPORT PRODUCTION') -print (Fore.YELLOW + '-------------------------------------------------') - -report_dir = reportdir + '/'+ test_session_start_time.strftime("%Y-%m-%d_%H-%M")+"_"+host - -cmd = 'mkdir -p ' + report_dir -result = os.system(cmd) - -cmd = 'cp -r '+locallogdir+' '+report_dir -result = os.system(cmd) - -context = { - 'report_path' : report_dir, - 'test_session_start_time' : test_session_start_time, - 'test_session_stop_time' : test_session_stop_time, - 'test_session_duration' : test_session_stop_time-test_session_start_time, - 'mtc_host' : host, - 'user' : user, - 'password' : pw, - 'test_results' : test_results, -} - -for test_result in test_results: - cmd = 'mkdir -p ' + report_dir + '/'+ test_result['testcase_name'] - result = os.system(cmd) - - report_file = report_dir + '/'+ test_result['testcase_name'] + '/'+ test_result['testcase_name']+ '_report.html' - - analyser.create_test_report_detailed_html(test_result, report_file ) - - print test_result - - -analyser.create_report_html(context) - -exit_prog(0) - diff --git a/cmake_targets/autotests/testsuite_ue_noS1_eurecom.xml b/cmake_targets/autotests/testsuite_ue_noS1_eurecom.xml deleted file mode 100644 index 25a4a652e5..0000000000 --- a/cmake_targets/autotests/testsuite_ue_noS1_eurecom.xml +++ /dev/null @@ -1,3214 +0,0 @@ - - -imb182-desktop yanbo-M4HM87P-00 - /mnt/sradio/TEST_RESULTS/ - https://gitlab.eurecom.fr/oai/openairinterface5g.git - https://gitlab.eurecom.fr/oai/openair-cn.git --> - develop - - - - - - - - - develop - oaisim oaisim_nos1 lte-softmodem lte-softmodem-nos1 mme_gw run_epc auth_request run_hss oai_hss mme spgw hss hss_sim configure_cots* wvdial iperf iperf_script iperf_script_phone ping tshark rrh_gw iperf3 iperf3_script iperf3_script_phone pppd - sudo -S -E /opt/ltebox/tools/stop_ltebox -$OPENAIR_DIR/cmake_targets/build_oai -w EXMIMO -c; sudo -S -E $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2; sudo -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_huaweiE398_ue.py --reset-ue; sudo -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue; uname -a; sudo -E dmesg - 36000 - - - yanbo-M4HM87P-00 - - - - - - lte-softmodem-noS1 - - imb182-desktop - yanbo-M4HM87P-00 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 0 --phy-test - - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w USRP --noS1 --eNB - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C2685004636. -r25 --ue-scan-carrier --ue-txgain 90 -A 20 --ue-rxgain 125 -S --phy-test -g 4 - - - - - - False - - UE_USRP.NOS1.PHYTEST_PERF.BAND7.5MHZ.MCS00 - 36 - - - - lte-softmodem-noS1 - - imb182-desktop - ued-PRM-130 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 0 --phy-test - - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w EXMIMO --noS1 - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C 2685000000 -r25 --ue-scan-carrier --ue-txgain 0 --ue-rxgain 5 -S -A 6 -F myriadRF_FMX --ue-max-power -25 --phy-test -g 4 - - - - - - False - - UE_UEDV1.NOS1.PHYTEST_PERF.BAND7.5MHZ.MCS00 - 36 - - - - lte-softmodem-noS1 - - imb182-desktop - yanbo-M4HM87P-00 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 1 --phy-test - - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w USRP --noS1 --eNB - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C2685004636. -r25 --ue-scan-carrier --ue-txgain 90 -A 20 --ue-rxgain 125 -S --phy-test -g 4 - - - - - - False - - UE_USRP.NOS1.PHYTEST_PERF.BAND7.5MHZ.MCS01 - 36 - - - - lte-softmodem-noS1 - - imb182-desktop - ued-PRM-130 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 1 --phy-test - - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w EXMIMO --noS1 - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C 2685000000 -r25 --ue-scan-carrier --ue-txgain 0 --ue-rxgain 5 -S -A 6 -F myriadRF_FMX --ue-max-power -25 --phy-test -g 4 - - - - - - False - - UE_UEDV1.NOS1.PHYTEST_PERF.BAND7.5MHZ.MCS01 - 36 - - - - - - - - - lte-softmodem-noS1 - - imb182-desktop - yanbo-M4HM87P-00 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 9 --phy-test - - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w USRP --noS1 --eNB - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C2685004636. -r25 --ue-scan-carrier --ue-txgain 90 -A 20 --ue-rxgain 125 -S --phy-test -g 4 - - - - - - False - - UE_USRP.NOS1.PHYTEST_PERF.BAND7.5MHZ.MCS09 - 36 - - - - lte-softmodem-noS1 - - imb182-desktop - ued-PRM-130 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 9 --phy-test - - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w EXMIMO --noS1 - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C 2685000000 -r25 --ue-scan-carrier --ue-txgain 0 --ue-rxgain 5 -S -A 6 -F myriadRF_FMX --ue-max-power -25 --phy-test -g 4 - - - - - - False - - UE_UEDV1.NOS1.PHYTEST_PERF.BAND7.5MHZ.MCS09 - 36 - - - - lte-softmodem-noS1 - - imb182-desktop - yanbo-M4HM87P-00 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 16 --phy-test - - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w USRP --noS1 --eNB - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C2685004636. -r25 --ue-scan-carrier --ue-txgain 90 -A 20 --ue-rxgain 125 -S --phy-test -g 4 - - - - - - False - - UE_USRP.NOS1.PHYTEST_PERF.BAND7.5MHZ.MCS16 - 36 - - - - lte-softmodem-noS1 - - imb182-desktop - ued-PRM-130 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 16 --phy-test - - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w EXMIMO --noS1 - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C 2685000000 -r25 --ue-scan-carrier --ue-txgain 0 --ue-rxgain 5 -S -A 6 -F myriadRF_FMX --ue-max-power -25 --phy-test -g 4 - - - - - - False - - UE_UEDV1.NOS1.PHYTEST_PERF.BAND7.5MHZ.MCS16 - 36 - - - - lte-softmodem-noS1 - - imb182-desktop - yanbo-M4HM87P-00 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 10 --phy-test - - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w USRP --noS1 --eNB - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C2685004636. -r25 --ue-scan-carrier --ue-txgain 90 -A 20 --ue-rxgain 125 -S --phy-test -g 4 - - - - - - False - UE_USRP.NOS1.PHYTEST_PERF.BAND7.5MHZ.MCS10 - - 36 - - - - lte-softmodem-noS1 - - imb182-desktop - ued-PRM-130 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 10 --phy-test - - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w EXMIMO --noS1 - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C 2685000000 -r25 --ue-scan-carrier --ue-txgain 0 --ue-rxgain 5 -S -A 6 -F myriadRF_FMX --ue-max-power -25 --phy-test -g 4 - - - - - - False - UE_UEDV1.NOS1.PHYTEST_PERF.BAND7.5MHZ.MCS10 - 36 - - - - - lte-softmodem-noS1 - - imb182-desktop - yanbo-M4HM87P-00 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 17 --phy-test - - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w USRP --noS1 --eNB - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C2685004636. -r25 --ue-scan-carrier --ue-txgain 90 -A 20 --ue-rxgain 125 -S --phy-test -g 4 - - - - - - False - UE_USRP.NOS1.PHYTEST_PERF.BAND7.5MHZ.MCS17 - - 36 - - - - lte-softmodem-noS1 - - imb182-desktop - ued-PRM-130 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 17 --phy-test - - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w EXMIMO --noS1 - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C 2685000000 -r25 --ue-scan-carrier --ue-txgain 0 --ue-rxgain 5 -S -A 6 -F myriadRF_FMX --ue-max-power -25 --phy-test -g 4 - - - - - - False - UE_UEDV1.NOS1.PHYTEST_PERF.BAND7.5MHZ.MCS17 - 36 - - - - - lte-softmodem-noS1 - - imb182-desktop - yanbo-M4HM87P-00 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 18 --phy-test - - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w USRP --noS1 --eNB - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C2685004636. -r25 --ue-scan-carrier --ue-txgain 90 -A 20 --ue-rxgain 125 -S --phy-test -g 4 - - - - - - False - UE_USRP.NOS1.PHYTEST_PERF.BAND7.5MHZ.MCS18 - - 36 - - - - lte-softmodem-noS1 - - imb182-desktop - ued-PRM-130 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 18 --phy-test - - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w EXMIMO --noS1 - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C 2685000000 -r25 --ue-scan-carrier --ue-txgain 0 --ue-rxgain 5 -S -A 6 -F myriadRF_FMX --ue-max-power -25 --phy-test -g 4 - - - - - - False - UE_UEDV1.NOS1.PHYTEST_PERF.BAND7.5MHZ.MCS18 - 36 - - - - - lte-softmodem-noS1 - - imb182-desktop - yanbo-M4HM87P-00 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 19 --phy-test - - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w USRP --noS1 --eNB - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C2685004636. -r25 --ue-scan-carrier --ue-txgain 90 -A 20 --ue-rxgain 125 -S --phy-test -g 4 - - - - - - False - UE_USRP.NOS1.PHYTEST_PERF.BAND7.5MHZ.MCS19 - - 36 - - - - lte-softmodem-noS1 - - imb182-desktop - ued-PRM-130 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 19 --phy-test - - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w EXMIMO --noS1 - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C 2685000000 -r25 --ue-scan-carrier --ue-txgain 0 --ue-rxgain 5 -S -A 6 -F myriadRF_FMX --ue-max-power -25 --phy-test -g 4 - - - - - - False - UE_UEDV1.NOS1.PHYTEST_PERF.BAND7.5MHZ.MCS19 - 36 - - - - - - lte-softmodem-noS1 - - imb182-desktop - yanbo-M4HM87P-00 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 20 --phy-test - - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w USRP --noS1 --eNB - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C2685004636. -r25 --ue-scan-carrier --ue-txgain 90 -A 20 --ue-rxgain 125 -S --phy-test -g 4 - - - - - - False - UE_USRP.NOS1.PHYTEST_PERF.BAND7.5MHZ.MCS20 - - 36 - - - - lte-softmodem-noS1 - - imb182-desktop - ued-PRM-130 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 20 --phy-test - - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w EXMIMO --noS1 - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C 2685000000 -r25 --ue-scan-carrier --ue-txgain 0 --ue-rxgain 5 -S -A 6 -F myriadRF_FMX --ue-max-power -25 --phy-test -g 4 - - - - - - False - UE_UEDV1.NOS1.PHYTEST_PERF.BAND7.5MHZ.MCS20 - 36 - - - - - lte-softmodem-noS1 - - imb182-desktop - yanbo-M4HM87P-00 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 21 --phy-test - - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w USRP --noS1 --eNB - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C2685004636. -r25 --ue-scan-carrier --ue-txgain 90 -A 20 --ue-rxgain 125 -S --phy-test -g 4 - - - - - - False - UE_USRP.NOS1.PHYTEST_PERF.BAND7.5MHZ.MCS21 - 36 - - - - - lte-softmodem-noS1 - - imb182-desktop - ued-PRM-130 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 21 --phy-test - - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w EXMIMO --noS1 - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C 2685000000 -r25 --ue-scan-carrier --ue-txgain 0 --ue-rxgain 5 -S -A 6 -F myriadRF_FMX --ue-max-power -25 --phy-test -g 4 - - - - - - False - UE_UEDV1.NOS1.PHYTEST_PERF.BAND7.5MHZ.MCS21 - 36 - - - - - lte-softmodem-noS1 - - imb182-desktop - yanbo-M4HM87P-00 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 22 --phy-test - - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w USRP --noS1 --eNB - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C2685004636. -r25 --ue-scan-carrier --ue-txgain 90 -A 20 --ue-rxgain 125 -S --phy-test -g 4 - - - - - - False - UE_USRP.NOS1.PHYTEST_PERF.BAND7.5MHZ.MCS22 - - 36 - - - - lte-softmodem-noS1 - - imb182-desktop - ued-PRM-130 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 22 --phy-test - - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w EXMIMO --noS1 - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C 2685000000 -r25 --ue-scan-carrier --ue-txgain 0 --ue-rxgain 5 -S -A 6 -F myriadRF_FMX --ue-max-power -25 --phy-test -g 4 - - - - - - False - UE_UEDV1.NOS1.PHYTEST_PERF.BAND7.5MHZ.MCS22 - 36 - - - - - lte-softmodem-noS1 - - imb182-desktop - yanbo-M4HM87P-00 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 23 --phy-test - - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w USRP --noS1 --eNB - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C2685004636. -r25 --ue-scan-carrier --ue-txgain 90 -A 20 --ue-rxgain 125 -S --phy-test -g 4 - - - - - - False - UE_USRP.NOS1.PHYTEST_PERF.BAND7.5MHZ.MCS23 - 36 - - - - - lte-softmodem-noS1 - - imb182-desktop - ued-PRM-130 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 23 --phy-test - - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w EXMIMO --noS1 - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C 2685000000 -r25 --ue-scan-carrier --ue-txgain 0 --ue-rxgain 5 -S -A 6 -F myriadRF_FMX --ue-max-power -25 --phy-test -g 4 - - - - - - False - UE_UEDV1.NOS1.PHYTEST_PERF.BAND7.5MHZ.MCS23 - 36 - - - - - lte-softmodem-noS1 - - imb182-desktop - yanbo-M4HM87P-00 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 24 --phy-test - - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w USRP --noS1 --eNB - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C2685004636. -r25 --ue-scan-carrier --ue-txgain 90 -A 20 --ue-rxgain 125 -S --phy-test -g 4 - - - - - - False - UE_USRP.NOS1.PHYTEST_PERF.BAND7.5MHZ.MCS24 - 36 - - - - - lte-softmodem-noS1 - - imb182-desktop - ued-PRM-130 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 24 --phy-test - - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w EXMIMO --noS1 - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C 2685000000 -r25 --ue-scan-carrier --ue-txgain 0 --ue-rxgain 5 -S -A 6 -F myriadRF_FMX --ue-max-power -25 --phy-test -g 4 - - - - - - False - UE_UEDV1.NOS1.PHYTEST_PERF.BAND7.5MHZ.MCS24 - 36 - - - - - - lte-softmodem-noS1 - - imb182-desktop - yanbo-M4HM87P-00 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 25 --phy-test - - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w USRP --noS1 --eNB - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C2685004636. -r25 --ue-scan-carrier --ue-txgain 90 -A 20 --ue-rxgain 125 -S --phy-test -g 4 - - - - - - False - UE_USRP.NOS1.PHYTEST_PERF.BAND7.5MHZ.MCS25 - 36 - - - - - lte-softmodem-noS1 - - imb182-desktop - ued-PRM-130 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 25 --phy-test - - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w EXMIMO --noS1 - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C 2685000000 -r25 --ue-scan-carrier --ue-txgain 0 --ue-rxgain 5 -S -A 6 -F myriadRF_FMX --ue-max-power -25 --phy-test -g 4 - - - - - - False - UE_UEDV1.NOS1.PHYTEST_PERF.BAND7.5MHZ.MCS25 - 36 - - - - - lte-softmodem-noS1 - - imb182-desktop - yanbo-M4HM87P-00 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 26 --phy-test - - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w USRP --noS1 --eNB - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C2685004636. -r25 --ue-scan-carrier --ue-txgain 90 -A 20 --ue-rxgain 125 -S --phy-test -g 4 - - - - - - False - UE_USRP.NOS1.PHYTEST_PERF.BAND7.5MHZ.MCS26 - 36 - - - - - lte-softmodem-noS1 - - imb182-desktop - ued-PRM-130 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 26 --phy-test - - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w EXMIMO --noS1 - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C 2685000000 -r25 --ue-scan-carrier --ue-txgain 0 --ue-rxgain 5 -S -A 6 -F myriadRF_FMX --ue-max-power -25 --phy-test -g 4 - - - - - - False - UE_UEDV1.NOS1.PHYTEST_PERF.BAND7.5MHZ.MCS26 - 36 - - - - - lte-softmodem-noS1 - - imb182-desktop - yanbo-M4HM87P-00 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 27 --phy-test - - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w USRP --noS1 --eNB - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C2685004636. -r25 --ue-scan-carrier --ue-txgain 90 -A 20 --ue-rxgain 125 -S --phy-test -g 4 - - - - - - False - UE_USRP.NOS1.PHYTEST_PERF.BAND7.5MHZ.MCS27 - 36 - - - - - lte-softmodem-noS1 - - imb182-desktop - ued-PRM-130 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 27 --phy-test - - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w EXMIMO --noS1 - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C 2685000000 -r25 --ue-scan-carrier --ue-txgain 0 --ue-rxgain 5 -S -A 6 -F myriadRF_FMX --ue-max-power -25 --phy-test -g 4 - - - - - - False - UE_UEDV1.NOS1.PHYTEST_PERF.BAND7.5MHZ.MCS27 - 36 - - - - - lte-softmodem-noS1 - - imb182-desktop - yanbo-M4HM87P-00 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 28 --phy-test - - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w USRP --noS1 --eNB - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C2685004636. -r25 --ue-scan-carrier --ue-txgain 90 -A 20 --ue-rxgain 125 -S --phy-test -g 4 - - - - - - False - UE_USRP.NOS1.PHYTEST_PERF.BAND7.5MHZ.MCS28 - 36 - - - - - lte-softmodem-noS1 - - imb182-desktop - ued-PRM-130 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 28 --phy-test - - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w EXMIMO --noS1 - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C 2685000000 -r25 --ue-scan-carrier --ue-txgain 0 --ue-rxgain 5 -S -A 6 -F myriadRF_FMX --ue-max-power -25 --phy-test -g 4 - - - - - - False - UE_UEDV1.NOS1.PHYTEST_PERF.BAND7.5MHZ.MCS28 - 36 - - - - - - lte-softmodem-noS1 - - imb182-desktop - yanbo-M4HM87P-00 - 18000 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 27 --phy-test - - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w USRP --noS1 --eNB - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C2685004636. -r25 --ue-scan-carrier --ue-txgain 90 -A 20 --ue-rxgain 125 -S --phy-test -g 4 - - - - - - False - UE_USRP.NOS1.PHYTEST_STAB.BAND7.5MHZ.MCS27 - 36 - - - - - lte-softmodem-noS1 - - imb182-desktop - ued-PRM-130 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 27 --phy-test - - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w EXMIMO --noS1 - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C 2685000000 -r25 --ue-scan-carrier --ue-txgain 0 --ue-rxgain 5 -S -A 6 -F myriadRF_FMX --ue-max-power -25 --phy-test -g 4 - - - - - - False - UE_UEDV1.NOS1.PHYTEST_STAB.BAND7.5MHZ.MCS27 - 36 - - - - - - lte-softmodem-noS1 - - imb182-desktop - yanbo-M4HM87P-00 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 50 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 27 --phy-test - - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w USRP --noS1 --eNB - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C2685004636. -r50 --ue-scan-carrier --ue-txgain 90 -A 20 --ue-rxgain 125 -S --phy-test -g 4 - - - - - - False - UE_USRP.NOS1.PHYTEST_PERF.BAND7.10MHZ.MCS27 - 36 - - - - - lte-softmodem-noS1 - - imb182-desktop - ued-PRM-130 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 50 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 27 --phy-test - - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w EXMIMO --noS1 - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C 2685000000 -r50 --ue-scan-carrier --ue-txgain 0 --ue-rxgain 5 -S -A 6 -F myriadRF_FMX --ue-max-power -25 --phy-test -g 4 - - - - - - False - UE_UEDV1.NOS1.PHYTEST_PERF.BAND7.10MHZ.MCS27 - 36 - - - - - - lte-softmodem-noS1 - - imb182-desktop - yanbo-M4HM87P-00 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 50 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 28 --phy-test - - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w USRP --noS1 --eNB - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C2685004636. -r50 --ue-scan-carrier --ue-txgain 90 -A 20 --ue-rxgain 125 -S --phy-test -g 4 - - - - - - False - UE_USRP.NOS1.PHYTEST_PERF.BAND7.10MHZ.MCS28 - 36 - - - - - - - lte-softmodem-noS1 - - imb182-desktop - ued-PRM-130 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 50 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 19 --phy-test - - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w EXMIMO --noS1 - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C 2685000000 -r50 --ue-scan-carrier --ue-txgain 0 --ue-rxgain 5 -S -A 6 -F myriadRF_FMX --ue-max-power -25 --phy-test -g 4 - - - - - - False - UE_UEDV1.NOS1.PHYTEST_PERF.BAND7.10MHZ.MCS19 - 36 - - - - - - lte-softmodem-noS1 - - imb182-desktop - yanbo-M4HM87P-00 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 0 - sleep 80;iperf -c 10.0.1.9 -i 1 -u -b 512K - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w USRP --noS1 --eNB - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C2685004636 -r25 --ue-scan-carrier --ue-txgain 90 -A 20 --ue-rxgain 125 -S -g 4 - - iperf -s -i 1 -u - - 200 - - False - UE_USRP.NOS1.DATA_IPERF.BAND7.5MHZ.MCS00 - 36 - - - - - lte-softmodem-noS1 - - imb182-desktop - ued-PRM-130 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 0 - sleep 80;iperf -c 10.0.1.9 -i 1 -u -b 512K - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w EXMIMO --noS1 - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C 2685000000 -r25 --ue-scan-carrier --ue-txgain 15 --ue-rxgain 5 -S -A 6 -F myriadRF_FMX --ue-max-power -25 -g 4 - - iperf -s -i 1 -u - - 200 - - False - UE_UEDV1.NOS1.DATA_IPERF.BAND7.5MHZ.MCS00 - 36 - - - - lte-softmodem-noS1 - - imb182-desktop - yanbo-M4HM87P-00 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 9 - sleep 80;iperf -c 10.0.1.9 -i 1 -u -b 2M - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w USRP --noS1 --eNB - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C2685004636 -r25 --ue-scan-carrier --ue-txgain 90 -A 20 --ue-rxgain 125 -S -g 4 - - iperf -s -i 1 -u - - 200 - - False - UE_USRP.NOS1.DATA_IPERF.BAND7.5MHZ.MCS09 - 36 - - - - - lte-softmodem-noS1 - - imb182-desktop - ued-PRM-130 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 9 - sleep 80;iperf -c 10.0.1.9 -i 1 -u -b 2M - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w EXMIMO --noS1 - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C 2685000000 -r25 --ue-scan-carrier --ue-txgain 15 --ue-rxgain 5 -S -A 6 -F myriadRF_FMX --ue-max-power -25 -g 4 - - iperf -s -i 1 -u - - 200 - - False - UE_UEDV1.NOS1.DATA_IPERF.BAND7.5MHZ.MCS09 - 36 - - - - - lte-softmodem-noS1 - - imb182-desktop - yanbo-M4HM87P-00 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 10 - sleep 80;iperf -c 10.0.1.9 -i 1 -u -b 2M - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w USRP --noS1 --eNB - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C2685004636 -r25 --ue-scan-carrier --ue-txgain 90 -A 20 --ue-rxgain 125 -S -g 4 - - iperf -s -i 1 -u - - 200 - - False - UE_USRP.NOS1.DATA_IPERF.BAND7.5MHZ.MCS10 - 36 - - - - - lte-softmodem-noS1 - - imb182-desktop - ued-PRM-130 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 10 - sleep 80;iperf -c 10.0.1.9 -i 1 -u -b 2M - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w EXMIMO --noS1 - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C 2685000000 -r25 --ue-scan-carrier --ue-txgain 15 --ue-rxgain 5 -S -A 6 -F myriadRF_FMX --ue-max-power -25 -g 4 - - iperf -s -i 1 -u - - 200 - - False - UE_UEDV1.NOS1.DATA_IPERF.BAND7.5MHZ.MCS10 - 36 - - - - - - lte-softmodem-noS1 - - imb182-desktop - yanbo-M4HM87P-00 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 16 - sleep 80;iperf -c 10.0.1.9 -i 1 -u -b 2M - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w USRP --noS1 --eNB - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C2685004636 -r25 --ue-scan-carrier --ue-txgain 90 -A 20 --ue-rxgain 125 -S -g 4 - - iperf -s -i 1 -u - - 200 - - False - UE_USRP.NOS1.DATA_IPERF.BAND7.5MHZ.MCS16 - 36 - - - - - lte-softmodem-noS1 - - imb182-desktop - ued-PRM-130 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 16 - sleep 80;iperf -c 10.0.1.9 -i 1 -u -b 2M - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w EXMIMO --noS1 - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C 2685000000 -r25 --ue-scan-carrier --ue-txgain 15 --ue-rxgain 5 -S -A 6 -F myriadRF_FMX --ue-max-power -25 -g 4 - - iperf -s -i 1 -u - - 200 - - False - UE_UEDV1.NOS1.DATA_IPERF.BAND7.5MHZ.MCS16 - 36 - - - - - - lte-softmodem-noS1 - - imb182-desktop - yanbo-M4HM87P-00 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 17 - sleep 80;iperf -c 10.0.1.9 -i 1 -u -b 2M - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w USRP --noS1 --eNB - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C2685004636 -r25 --ue-scan-carrier --ue-txgain 90 -A 20 --ue-rxgain 125 -S -g 4 - - iperf -s -i 1 -u - - 200 - - False - UE_USRP.NOS1.DATA_IPERF.BAND7.5MHZ.MCS17 - 36 - - - - - lte-softmodem-noS1 - - imb182-desktop - ued-PRM-130 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 17 - sleep 80;iperf -c 10.0.1.9 -i 1 -u -b 2M - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w EXMIMO --noS1 - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C 2685000000 -r25 --ue-scan-carrier --ue-txgain 15 --ue-rxgain 5 -S -A 6 -F myriadRF_FMX --ue-max-power -25 -g 4 - - iperf -s -i 1 -u - - 200 - - False - UE_UEDV1.NOS1.DATA_IPERF.BAND7.5MHZ.MCS17 - 36 - - - - - - - - lte-softmodem-noS1 - - imb182-desktop - yanbo-M4HM87P-00 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 19 - sleep 80;iperf -c 10.0.1.9 -i 1 -u -b 2M - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w USRP --noS1 --eNB - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C2685004636 -r25 --ue-scan-carrier --ue-txgain 90 -A 20 --ue-rxgain 125 -S -g 4 - - iperf -s -i 1 -u - - 200 - - False - UE_USRP.NOS1.DATA_IPERF.BAND7.5MHZ.MCS19 - 36 - - - - - lte-softmodem-noS1 - - imb182-desktop - ued-PRM-130 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 19 - sleep 80;iperf -c 10.0.1.9 -i 1 -u -b 2M - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w EXMIMO --noS1 - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C 2685000000 -r25 --ue-scan-carrier --ue-txgain 15 --ue-rxgain 5 -S -A 6 -F myriadRF_FMX --ue-max-power -25 -g 4 - - iperf -s -i 1 -u - - 200 - - False - UE_UEDV1.NOS1.DATA_IPERF.BAND7.5MHZ.MCS19 - 36 - - - - - lte-softmodem-noS1 - - imb182-desktop - yanbo-M4HM87P-00 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 27 - sleep 80;iperf -c 10.0.1.9 -i 1 -u -b 2M - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w USRP --noS1 --eNB - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C2685004636 -r25 --ue-scan-carrier --ue-txgain 90 -A 20 --ue-rxgain 125 -S -g 4 - - iperf -s -i 1 -u - - 200 - - False - UE_USRP.NOS1.DATA_IPERF.BAND7.5MHZ.MCS27 - 36 - - - - - lte-softmodem-noS1 - - imb182-desktop - yanbo-M4HM87P-00 - 3600 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 27 - sleep 80;iperf -c 10.0.1.9 -i 1 -u -b 2M - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w USRP --noS1 --eNB - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C2685004636 -r25 --ue-scan-carrier --ue-txgain 90 -A 20 --ue-rxgain 125 -S -g 4 - - iperf -s -i 1 -u - - 2800 - - False - UE_USRP.NOS1.DATA_IPERF_STAB.BAND7.5MHZ.MCS27 - 16 - - - - - lte-softmodem-noS1 - - imb182-desktop - ued-PRM-130 - 300 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"95\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2685000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 - $OPENAIR_DIR/cmake_targets/build_oai - -c -w USRP --eNB --noS1 - source $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 eNB - - $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W -m 27 - sleep 80;iperf -c 10.0.1.9 -i 1 -u -b 2M - - - - False - - /tmp - - $OPENAIR_DIR/cmake_targets/build_oai - -c --UE -w EXMIMO --noS1 - source ./targets/bin/init_nas_nos1 UE - - sleep 50; ./cmake_targets/autotests/tools/run_gdb ./cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 -U -C 2685000000 -r25 --ue-scan-carrier --ue-txgain 15 --ue-rxgain 5 -S -A 6 -F myriadRF_FMX --ue-max-power -25 -g 4 - - iperf -s -i 1 -u - - 200 - - False - UE_UEDV1.NOS1.DATA_IPERF.BAND7.5MHZ.MCS27 - 36 - - - diff --git a/openair1/PHY/CODING/3gpplte_turbo_decoder_sse_8bit.c b/openair1/PHY/CODING/3gpplte_turbo_decoder_sse_8bit.c index 5ae2ec2ecd..ff7e02a239 100644 --- a/openair1/PHY/CODING/3gpplte_turbo_decoder_sse_8bit.c +++ b/openair1/PHY/CODING/3gpplte_turbo_decoder_sse_8bit.c @@ -972,11 +972,6 @@ unsigned char phy_threegpplte_turbo_decoder8(short *y, } else n2 = n; - if(n2<256) - { - printf("phy_threegpplte_turbo_decoder8 : frame length < 256\n"); - return 255; - } for (iind=0; iind < 188 && f1f2mat[iind].nb_bits != n; iind++);