diff --git a/targets/ARCH/EXMIMO/USERSPACE/OCTAVE/rx_spec.m b/targets/ARCH/EXMIMO/USERSPACE/OCTAVE/rx_spec.m
index ad1a5a3914..d646e6076a 100755
--- a/targets/ARCH/EXMIMO/USERSPACE/OCTAVE/rx_spec.m
+++ b/targets/ARCH/EXMIMO/USERSPACE/OCTAVE/rx_spec.m
@@ -1,33 +1,35 @@
 dual_tx=0;
 card=0;
 limeparms;
-active_rf = [1 1 0 0];
+active_rf = zeros(1,4);
+active_rf = [1 1 1 1];
+autocal = [1 1 1 1];
+resampling_factor = [2 2 2 2];
+
 %rf_mode = (RXEN+TXEN+TXLPFNORM+TXLPFEN+TXLPF25+RXLPFNORM+RXLPFEN+RXLPF25+LNA1ON+LNAMax+RFBBNORM)*[1 1 1 1];
 rf_mode = (RXEN+TXLPFNORM+TXLPFEN+TXLPF25+RXLPFNORM+RXLPFEN+RXLPF25+LNA1ON+LNAMax+RFBBNORM)*active_rf;
-rf_mode = rf_mode+(DMAMODE_RX*active_rf);
+rf_mode = rf_mode+((DMAMODE_RX+DMAMODE_TX)*active_rf);
 %freq_rx = 2540000000*[1 1 1 1];
 freq_rx = 1907600000*active_rf;
-%freq_rx = 1912600000*active_rf; %+ 2540000000*[0 1 0 0]; % + 859500000*[0 0 1 0];
+%freq_rx = 2680000000*active_rf; %+ 2540000000*[0 1 0 0]; % + 859500000*[0 0 1 0];
 %freq_rx = 1912600000*[1 1 1 1];
 %freq_rx = 859500000*[1 1 1 1];
-freq_tx = freq_rx;
-tx_gain = 0*[1 1 1 1];
-rx_gain = 0*[1 1 1 1];
-rf_local= rf_local*[1 1 1 1];
-rf_rxdc = rf_rxdc*[1 1 1 1];
+freq_tx = freq_rx-120000000*active_rf;
+tx_gain = 0*active_rf; %[1 1 1 1];
+rx_gain = 0*active_rf; %1 1 1 1];
+rf_local= rf_local*active_rf; %[1 1 1 1];
+rf_rxdc = rf_rxdc*active_rf; %[1 1 1 1];
 %rf_vcocal=rf_vcocal_859*[1 1 1 1];
-rf_vcocal=rf_vcocal_19G*[1 1 1 1];
+rf_vcocal=rf_vcocal_19G*active_rf; %1 1 1 1];
 eNBflag = 0;
 tdd_config = DUPLEXMODE_FDD + TXRXSWITCH_TESTRX; 
 %tdd_config = DUPLEXMODE_FDD + TXRXSWITCH_LSB;
 syncmode = SYNCMODE_FREE;
-rffe_rxg_low = 63*active_rf;
-rffe_rxg_final = 31*active_rf;
-rffe_band = B19G_TDD*active_rf;
-autocal = [1 1 1 1];
-autocal = [1 1 1 1];
+rffe_rxg_low = 31*active_rf; %[1 1 1 1];
+rffe_rxg_final = 63*active_rf; %[1 1 1 1];
+rffe_band = B19G_TDD*active_rf; %[1 1 1 1];
+oarf_config_exmimo(card,freq_rx,freq_tx,tdd_config,syncmode,rx_gain,tx_gain,eNBflag,rf_mode,rf_rxdc,rf_local,rf_vcocal,rffe_rxg_low,rffe_rxg_final,rffe_band,autocal,resampling_factor)
 
-oarf_config_exmimo(card,freq_rx,freq_tx,tdd_config,syncmode,rx_gain,tx_gain,eNBflag,rf_mode,rf_rxdc,rf_local,rf_vcocal,rffe_rxg_low,rffe_rxg_final,rffe_band,autocal)
 
 gpib_card=0;      % first GPIB PCI card in the computer
 gpib_device=28;   % this is configured in the signal generator Utilities->System
@@ -39,15 +41,84 @@ power_dBm = -95;
 
 
 s=oarf_get_frame(card);
-f = (7.68*(0:length(s(:,1))-1)/(length(s(:,1))))-3.84;
+if (resampling_factor(1)== 2)
+f0 = (7.68*(0:length(s(:,1))-1)/(length(s(:,1))))-3.84;
+axis([-3.84,3.84,40,200]);
+elseif (resampling_factor(1) == 1)
+f0 = (15.36*(0:length(s(:,1))-1)/(length(s(:,1))))-7.68;
+axis([-7.68,7.68,40,200]);
+else
+f0 = (30.72*(0:length(s(:,1))-1)/(length(s(:,1))))-15.36;
+axis([-15.36,15.36,40,200]);
+endif
+
+
+if (resampling_factor(2)== 2)
+f1 = (7.68*(0:length(s(:,2))-1)/(length(s(:,2))))-3.84;
+axis([-3.84,3.84,40,200]);
+elseif (resampling_factor(2) == 1)
+f1 = (15.36*(0:length(s(:,2))-1)/(length(s(:,2))))-7.68;
+axis([-7.68,7.68,40,200]);
+else
+f1 = (30.72*(0:length(s(:,2))-1)/(length(s(:,2))))-15.36;
+axis([-15.36,15.36,40,200]);
+endif
+
+if (resampling_factor(3)== 2)
+f2 = (7.68*(0:length(s(:,3))-1)/(length(s(:,3))))-3.84;
+axis([-3.84,3.84,40,200]);
+elseif (resampling_factor(3) == 1)
+f2 = (15.36*(0:length(s(:,3))-1)/(length(s(:,3))))-7.68;
+axis([-7.68,7.68,40,200]);
+else
+f2 = (30.72*(0:length(s(:,3))-1)/(length(s(:,3))))-15.36;
+axis([-15.36,15.36,40,200]);
+endif
+
+if (resampling_factor(4)== 2)
+f3 = (7.68*(0:length(s(:,4))-1)/(length(s(:,4))))-3.84;
+axis([-3.84,3.84,40,200]);
+elseif (resampling_factor(4) == 1)
+f3 = (15.36*(0:length(s(:,4))-1)/(length(s(:,4))))-7.68;
+axis([-7.68,7.68,40,200]);
+else
+f3 = (30.72*(0:length(s(:,4))-1)/(length(s(:,4))))-15.36;
+axis([-15.36,15.36,40,200]);
+endif
+
+
 spec0 = 20*log10(abs(fftshift(fft(s(:,1)))));
 spec1 = 20*log10(abs(fftshift(fft(s(:,2)))));
 spec2 = 20*log10(abs(fftshift(fft(s(:,3)))));
 spec3 = 20*log10(abs(fftshift(fft(s(:,4)))));
 
 clf
-plot(f',spec0,'r',f',spec1,'b',f',spec2,'g',f',spec3,'m')
-axis([-3.84,3.84,40,160]);
+if (active_rf(1) == 1)
+hold off;
+plot(f0',spec0,'r');
+endif
+%hold on
+if (active_rf(2) == 1)
+hold off;
+figure;
+plot(f1',spec1,'b');
+endif
+%hold on
+if (active_rf(3) == 1)
+hold off;
+figure;
+plot(f2',spec2,'g');
+endif
+%hold on
+if (active_rf(4) == 1)
+hold off;
+figure;
+plot(f3',spec3,'m');
+endif
+%hold on
+
+%hold off
+%axis([-3.84,3.84,40,160]);
 %gpib_send(gpib_card,gpib_device,'OUTP:STAT OFF'); %  activate output 
-legend('Antenna Port 0','Antenna Port 1','Antenna Port 2','Antenna Port 3');
+%legend('Antenna Port 0','Antenna Port 1','Antenna Port 2','Antenna Port 3');
 grid