diff --git a/executables/nr-ue.c b/executables/nr-ue.c index 3ea23dfb9d..f860922fb9 100644 --- a/executables/nr-ue.c +++ b/executables/nr-ue.c @@ -18,41 +18,16 @@ * For more information about the OpenAirInterface (OAI) Software Alliance: * contact@openairinterface.org */ -#include "executables/thread-common.h" + #include "executables/nr-uesoftmodem.h" - -#include "NR_MAC_UE/mac.h" -//#include "RRC/LTE/rrc_extern.h" -//#undef FRAME_LENGTH_COMPLEX_SAMPLES //there are two conflicting definitions, so we better make sure we don't use it at all - -#include "fapi_nr_ue_l1.h" #include "PHY/phy_extern_nr_ue.h" #include "PHY/INIT/phy_init.h" -#include "PHY/MODULATION/modulation_UE.h" #include "NR_MAC_UE/mac_proto.h" #include "RRC/NR_UE/rrc_proto.h" - #include "SCHED_NR_UE/phy_frame_config_nr.h" #include "SCHED_NR_UE/defs.h" - #include "PHY/NR_UE_TRANSPORT/nr_transport_proto_ue.h" -#include "common/utils/LOG/log.h" -#include "common/utils/system.h" -#include "common/utils/LOG/vcd_signal_dumper.h" -#include "executables/nr-softmodem.h" - -#include "T.h" - -#include "PHY_INTERFACE/phy_interface_extern.h" - -// Missing stuff? -int next_ra_frame = 0; -module_id_t next_Mod_id = 0; - -//static nfapi_nr_config_request_t config_t; -//static nfapi_nr_config_request_t* config =&config_t; - /* * NR SLOT PROCESSING SEQUENCE * @@ -387,9 +362,8 @@ void processSlotRX( PHY_VARS_NR_UE *UE, UE_nr_rxtx_proc_t *proc) { phy_procedures_slot_parallelization_nrUE_RX( UE, proc, 0, 0, 1, UE->mode, no_relay, NULL ); #else uint64_t a=rdtsc(); - phy_procedures_nrUE_RX( UE, proc, 0, UE->mode); - LOG_D(PHY,"phy_procedures_nrUE_RX: slot:%d, time %lu\n", proc->nr_slot_rx, (rdtsc()-a)/3500); - //printf(">>> nr_ue_pdcch_procedures ended\n"); + phy_procedures_nrUE_RX(UE, proc, gNB_id, UE->mode); + LOG_D(PHY, "In %s: slot %d, time %lu\n", __FUNCTION__, proc->nr_slot_rx, (rdtsc()-a)/3500); #endif if(IS_SOFTMODEM_NOS1){ @@ -400,23 +374,6 @@ void processSlotRX( PHY_VARS_NR_UE *UE, UE_nr_rxtx_proc_t *proc) { } } - // no UL for now - /* - if (UE->mac_enabled==1) { - // trigger L2 to run ue_scheduler thru IF module - // [TODO] mapping right after NR initial sync - if(UE->if_inst != NULL && UE->if_inst->ul_indication != NULL) { - UE->ul_indication.module_id = 0; - UE->ul_indication.gNB_index = 0; - UE->ul_indication.cc_id = 0; - UE->ul_indication.frame = proc->frame_rx; - UE->ul_indication.slot = proc->nr_slot_rx; - UE->ul_indication.thread_id = proc->thread_id; - UE->if_inst->ul_indication(&UE->ul_indication); - } - } - */ - } /*! diff --git a/openair1/PHY/INIT/nr_init.c b/openair1/PHY/INIT/nr_init.c index 49ec60c94b..d65196a6da 100644 --- a/openair1/PHY/INIT/nr_init.c +++ b/openair1/PHY/INIT/nr_init.c @@ -82,8 +82,6 @@ int phy_init_nr_gNB(PHY_VARS_gNB *gNB, NR_gNB_COMMON *const common_vars = &gNB->common_vars; NR_gNB_PRACH *const prach_vars = &gNB->prach_vars; NR_gNB_PUSCH **const pusch_vars = gNB->pusch_vars; - /*LTE_eNB_SRS *const srs_vars = gNB->srs_vars; - LTE_eNB_PRACH *const prach_vars = &gNB->prach_vars;*/ int i; int Ptx=cfg->carrier_config.num_tx_ant.value; @@ -96,19 +94,7 @@ int phy_init_nr_gNB(PHY_VARS_gNB *gNB, while(gNB->configured == 0) usleep(10000); load_dftslib(); - /* - LOG_I(PHY,"[gNB %"PRIu8"] Initializing DL_FRAME_PARMS : N_RB_DL %"PRIu8", PHICH Resource %d, PHICH Duration %d nb_antennas_tx:%u nb_antennas_rx:%u PRACH[rootSequenceIndex:%u prach_Config_enabled:%u configIndex:%u highSpeed:%u zeroCorrelationZoneConfig:%u freqOffset:%u]\n", - gNB->Mod_id, - fp->N_RB_DL,fp->phich_config_common.phich_resource, - fp->phich_config_common.phich_duration, - fp->nb_antennas_tx, fp->nb_antennas_rx, - fp->prach_config_common.rootSequenceIndex, - fp->prach_config_common.prach_Config_enabled, - fp->prach_config_common.prach_ConfigInfo.prach_ConfigIndex, - fp->prach_config_common.prach_ConfigInfo.highSpeedFlag, - fp->prach_config_common.prach_ConfigInfo.zeroCorrelationZoneConfig, - fp->prach_config_common.prach_ConfigInfo.prach_FreqOffset - );*/ + LOG_D(PHY,"[MSC_NEW][FRAME 00000][PHY_gNB][MOD %02"PRIu8"][]\n", gNB->Mod_id); crcTableInit(); init_scrambling_luts(); diff --git a/openair1/PHY/INIT/nr_init_ue.c b/openair1/PHY/INIT/nr_init_ue.c index 71e0ad7ec0..923330029d 100644 --- a/openair1/PHY/INIT/nr_init_ue.c +++ b/openair1/PHY/INIT/nr_init_ue.c @@ -41,316 +41,6 @@ #include "PHY/NR_REFSIG/refsig_defs_ue.h" #include "PHY/NR_REFSIG/nr_refsig.h" -//uint8_t dmrs1_tab_ue[8] = {0,2,3,4,6,8,9,10}; - -/*void phy_config_sib1_ue(uint8_t Mod_id,int CC_id, - uint8_t gNB_id, - TDD_Config_t *tdd_Config, - uint8_t SIwindowsize, - uint16_t SIperiod) -{ - - NR_DL_FRAME_PARMS *fp = &PHY_vars_UE_g[Mod_id][CC_id]->frame_parms; - - if (tdd_Config) { - fp->tdd_config = tdd_Config->subframeAssignment; - fp->tdd_config_S = tdd_Config->specialSubframePatterns; - } - - fp->SIwindowsize = SIwindowsize; - fp->SIPeriod = SIperiod; -} - -void phy_config_sib2_ue(uint8_t Mod_id,int CC_id, - uint8_t gNB_id, - RadioResourceConfigCommonSIB_t *radioResourceConfigCommon, - ARFCN_ValueEUTRA_t *ul_CarrierFreq, - long *ul_Bandwidth, - AdditionalSpectrumEmission_t *additionalSpectrumEmission, - struct MBSFN_SubframeConfigList *mbsfn_SubframeConfigList) -{ - - PHY_VARS_UE *ue = PHY_vars_UE_g[Mod_id][CC_id]; - NR_DL_FRAME_PARMS *fp = &ue->frame_parms; - int i; - - VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_UE_CONFIG_SIB2, VCD_FUNCTION_IN); - - LOG_I(PHY,"[UE%d] Applying radioResourceConfigCommon from eNB%d\n",Mod_id,gNB_id); - - ue->prach_vars[gNB_id]->prach_pdu.root_seq_id =radioResourceConfigCommon->prach_Config.rootSequenceIndex; - - ue->prach_vars[gNB_id]->prach_Config_enabled=1; - //ue->prach_vars[gNB_id]->prach_pdu.prach_ConfigIndex =radioResourceConfigCommon->prach_Config.prach_ConfigInfo.prach_ConfigIndex; - ue->prach_vars[gNB_id]->prach_pdu.restricted_set =radioResourceConfigCommon->prach_Config.prach_ConfigInfo.highSpeedFlag; - ue->prach_vars[gNB_id]->prach_pdu.num_cs =radioResourceConfigCommon->prach_Config.prach_ConfigInfo.zeroCorrelationZoneConfig; - //ue->prach_vars[gNB_id]->prach_pdu.prach_FreqOffset =radioResourceConfigCommon->prach_Config.prach_ConfigInfo.prach_FreqOffset; - - //compute_prach_seq(fp->prach_config_common.rootSequenceIndex, - // fp->prach_config_common.prach_ConfigInfo.prach_ConfigIndex, - // fp->prach_config_common.prach_ConfigInfo.zeroCorrelationZoneConfig, - // fp->prach_config_common.prach_ConfigInfo.highSpeedFlag, - // fp->frame_type,ue->X_u); - - - - fp->pucch_config_common.deltaPUCCH_Shift = 1+radioResourceConfigCommon->pucch_ConfigCommon.deltaPUCCH_Shift; - fp->pucch_config_common.nRB_CQI = radioResourceConfigCommon->pucch_ConfigCommon.nRB_CQI; - fp->pucch_config_common.nCS_AN = radioResourceConfigCommon->pucch_ConfigCommon.nCS_AN; - fp->pucch_config_common.n1PUCCH_AN = radioResourceConfigCommon->pucch_ConfigCommon.n1PUCCH_AN; - - - - fp->pdsch_config_common.referenceSignalPower = radioResourceConfigCommon->pdsch_ConfigCommon.referenceSignalPower; - fp->pdsch_config_common.p_b = radioResourceConfigCommon->pdsch_ConfigCommon.p_b; - - - fp->pusch_config_common.n_SB = radioResourceConfigCommon->pusch_ConfigCommon.pusch_ConfigBasic.n_SB; - fp->pusch_config_common.hoppingMode = radioResourceConfigCommon->pusch_ConfigCommon.pusch_ConfigBasic.hoppingMode; - fp->pusch_config_common.pusch_HoppingOffset = radioResourceConfigCommon->pusch_ConfigCommon.pusch_ConfigBasic.pusch_HoppingOffset; - fp->pusch_config_common.enable64QAM = radioResourceConfigCommon->pusch_ConfigCommon.pusch_ConfigBasic.enable64QAM; - fp->pusch_config_common.ul_ReferenceSignalsPUSCH.groupHoppingEnabled = radioResourceConfigCommon->pusch_ConfigCommon.ul_ReferenceSignalsPUSCH.groupHoppingEnabled; - fp->pusch_config_common.ul_ReferenceSignalsPUSCH.groupAssignmentPUSCH = radioResourceConfigCommon->pusch_ConfigCommon.ul_ReferenceSignalsPUSCH.groupAssignmentPUSCH; - fp->pusch_config_common.ul_ReferenceSignalsPUSCH.sequenceHoppingEnabled = radioResourceConfigCommon->pusch_ConfigCommon.ul_ReferenceSignalsPUSCH.sequenceHoppingEnabled; - fp->pusch_config_common.ul_ReferenceSignalsPUSCH.cyclicShift = dmrs1_tab_ue[radioResourceConfigCommon->pusch_ConfigCommon.ul_ReferenceSignalsPUSCH.cyclicShift]; - - - init_ul_hopping(fp); - fp->soundingrs_ul_config_common.enabled_flag = 0; - - if (radioResourceConfigCommon->soundingRS_UL_ConfigCommon.present==SoundingRS_UL_ConfigCommon_PR_setup) { - fp->soundingrs_ul_config_common.enabled_flag = 1; - fp->soundingrs_ul_config_common.srs_BandwidthConfig = radioResourceConfigCommon->soundingRS_UL_ConfigCommon.choice.setup.srs_BandwidthConfig; - fp->soundingrs_ul_config_common.srs_SubframeConfig = radioResourceConfigCommon->soundingRS_UL_ConfigCommon.choice.setup.srs_SubframeConfig; - fp->soundingrs_ul_config_common.ackNackSRS_SimultaneousTransmission = radioResourceConfigCommon->soundingRS_UL_ConfigCommon.choice.setup.ackNackSRS_SimultaneousTransmission; - - if (radioResourceConfigCommon->soundingRS_UL_ConfigCommon.choice.setup.srs_MaxUpPts) - fp->soundingrs_ul_config_common.srs_MaxUpPts = 1; - else - fp->soundingrs_ul_config_common.srs_MaxUpPts = 0; - } - - - - fp->ul_power_control_config_common.p0_NominalPUSCH = radioResourceConfigCommon->uplinkPowerControlCommon.p0_NominalPUSCH; - fp->ul_power_control_config_common.alpha = radioResourceConfigCommon->uplinkPowerControlCommon.alpha; - fp->ul_power_control_config_common.p0_NominalPUCCH = radioResourceConfigCommon->uplinkPowerControlCommon.p0_NominalPUCCH; - fp->ul_power_control_config_common.deltaPreambleMsg3 = radioResourceConfigCommon->uplinkPowerControlCommon.deltaPreambleMsg3; - fp->ul_power_control_config_common.deltaF_PUCCH_Format1 = radioResourceConfigCommon->uplinkPowerControlCommon.deltaFList_PUCCH.deltaF_PUCCH_Format1; - fp->ul_power_control_config_common.deltaF_PUCCH_Format1b = radioResourceConfigCommon->uplinkPowerControlCommon.deltaFList_PUCCH.deltaF_PUCCH_Format1b; - fp->ul_power_control_config_common.deltaF_PUCCH_Format2 = radioResourceConfigCommon->uplinkPowerControlCommon.deltaFList_PUCCH.deltaF_PUCCH_Format2; - fp->ul_power_control_config_common.deltaF_PUCCH_Format2a = radioResourceConfigCommon->uplinkPowerControlCommon.deltaFList_PUCCH.deltaF_PUCCH_Format2a; - fp->ul_power_control_config_common.deltaF_PUCCH_Format2b = radioResourceConfigCommon->uplinkPowerControlCommon.deltaFList_PUCCH.deltaF_PUCCH_Format2b; - - fp->maxHARQ_Msg3Tx = radioResourceConfigCommon->rach_ConfigCommon.maxHARQ_Msg3Tx; - - // Now configure some of the Physical Channels - - // PUCCH - init_ncs_cell(fp,ue->ncs_cell); - - init_ul_hopping(fp); - - // PCH - init_ue_paging_info(ue,radioResourceConfigCommon->pcch_Config.defaultPagingCycle,radioResourceConfigCommon->pcch_Config.nB); - - // MBSFN - - if (mbsfn_SubframeConfigList != NULL) { - fp->num_MBSFN_config = mbsfn_SubframeConfigList->list.count; - - for (i=0; ilist.count; i++) { - fp->MBSFN_config[i].radioframeAllocationPeriod = mbsfn_SubframeConfigList->list.array[i]->radioframeAllocationPeriod; - fp->MBSFN_config[i].radioframeAllocationOffset = mbsfn_SubframeConfigList->list.array[i]->radioframeAllocationOffset; - - if (mbsfn_SubframeConfigList->list.array[i]->subframeAllocation.present == MBSFN_SubframeConfig__subframeAllocation_PR_oneFrame) { - fp->MBSFN_config[i].fourFrames_flag = 0; - fp->MBSFN_config[i].mbsfn_SubframeConfig = mbsfn_SubframeConfigList->list.array[i]->subframeAllocation.choice.oneFrame.buf[0]; // 6-bit subframe configuration - LOG_I(PHY, "[CONFIG] MBSFN_SubframeConfig[%d] pattern is %d\n", i, - fp->MBSFN_config[i].mbsfn_SubframeConfig); - } else if (mbsfn_SubframeConfigList->list.array[i]->subframeAllocation.present == MBSFN_SubframeConfig__subframeAllocation_PR_fourFrames) { // 24-bit subframe configuration - fp->MBSFN_config[i].fourFrames_flag = 1; - fp->MBSFN_config[i].mbsfn_SubframeConfig = - mbsfn_SubframeConfigList->list.array[i]->subframeAllocation.choice.oneFrame.buf[0]| - (mbsfn_SubframeConfigList->list.array[i]->subframeAllocation.choice.oneFrame.buf[1]<<8)| - (mbsfn_SubframeConfigList->list.array[i]->subframeAllocation.choice.oneFrame.buf[2]<<16); - - LOG_I(PHY, "[CONFIG] MBSFN_SubframeConfig[%d] pattern is %d\n", i, - fp->MBSFN_config[i].mbsfn_SubframeConfig); - } - } - } - - VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_UE_CONFIG_SIB2, VCD_FUNCTION_OUT); - -} - -void phy_config_sib13_ue(uint8_t Mod_id,int CC_id,uint8_t gNB_id,int mbsfn_Area_idx, - long mbsfn_AreaId_r9) -{ - - NR_DL_FRAME_PARMS *fp = &PHY_vars_UE_g[Mod_id][CC_id]->frame_parms; - - - LOG_I(PHY,"[UE%d] Applying MBSFN_Area_id %ld for index %d\n",Mod_id,mbsfn_AreaId_r9,mbsfn_Area_idx); - - if (mbsfn_Area_idx == 0) { - fp->Nid_cell_mbsfn = (uint16_t)mbsfn_AreaId_r9; - LOG_N(PHY,"Fix me: only called when mbsfn_Area_idx == 0)\n"); - } - - lte_gold_mbsfn(fp,PHY_vars_UE_g[Mod_id][CC_id]->lte_gold_mbsfn_table,fp->Nid_cell_mbsfn); - -}*/ - - -/* - * Configures UE MAC and PHY with radioResourceCommon received in mobilityControlInfo IE during Handover - */ -/*void phy_config_afterHO_ue(uint8_t Mod_id,uint8_t CC_id,uint8_t gNB_id, MobilityControlInfo_t *mobilityControlInfo, uint8_t ho_failed) -{ - - if(mobilityControlInfo!=NULL) { - RadioResourceConfigCommon_t *radioResourceConfigCommon = &mobilityControlInfo->radioResourceConfigCommon; - LOG_I(PHY,"radioResourceConfigCommon %p\n", radioResourceConfigCommon); - memcpy((void *)&PHY_vars_UE_g[Mod_id][CC_id]->frame_parms_before_ho, - (void *)&PHY_vars_UE_g[Mod_id][CC_id]->frame_parms, - sizeof(NR_DL_FRAME_PARMS)); - PHY_vars_UE_g[Mod_id][CC_id]->ho_triggered = 1; - //PHY_vars_UE_g[UE_id]->UE_mode[0] = PRACH; - - NR_DL_FRAME_PARMS *fp = &PHY_vars_UE_g[Mod_id][CC_id]->frame_parms; - // int N_ZC; - // uint8_t prach_fmt; - // int u; - - LOG_I(PHY,"[UE%d] Handover triggered: Applying radioResourceConfigCommon from eNB %d\n", - Mod_id,gNB_id); - - ue->prach_vars[gNB_id]->prach_pdu.root_seq_id =radioResourceConfigCommon->prach_Config.rootSequenceIndex; - ue->prach_vars[gNB_id]->prach_Config_enabled=1; - //ue->prach_vars[gNB_id]->prach_pdu.prach_ConfigIndex =radioResourceConfigCommon->prach_Config.prach_ConfigInfo->prach_ConfigIndex; - ue->prach_vars[gNB_id]->prach_pdu.restricted_set =radioResourceConfigCommon->prach_Config.prach_ConfigInfo->highSpeedFlag; - ue->prach_vars[gNB_id]->prach_pdu.num_cs =radioResourceConfigCommon->prach_Config.prach_ConfigInfo->zeroCorrelationZoneConfig; - //ue->prach_vars[gNB_id]->prach_pdu.prach_FreqOffset =radioResourceConfigCommon->prach_Config.prach_ConfigInfo->prach_FreqOffset; - - // prach_fmt = get_prach_fmt(radioResourceConfigCommon->prach_Config.prach_ConfigInfo->prach_ConfigIndex,fp->frame_type); - // N_ZC = (prach_fmt <4)?839:139; - // u = (prach_fmt < 4) ? prach_root_sequence_map0_3[fp->prach_config_common.rootSequenceIndex] : - // prach_root_sequence_map4[fp->prach_config_common.rootSequenceIndex]; - - //compute_prach_seq(u,N_ZC, PHY_vars_UE_g[Mod_id]->X_u); - //compute_prach_seq(PHY_vars_UE_g[Mod_id][CC_id]->frame_parms.prach_config_common.rootSequenceIndex, - // PHY_vars_UE_g[Mod_id][CC_id]->frame_parms.prach_config_common.prach_ConfigInfo.prach_ConfigIndex, - // PHY_vars_UE_g[Mod_id][CC_id]->frame_parms.prach_config_common.prach_ConfigInfo.zeroCorrelationZoneConfig, - // PHY_vars_UE_g[Mod_id][CC_id]->frame_parms.prach_config_common.prach_ConfigInfo.highSpeedFlag, - // fp->frame_type, - // PHY_vars_UE_g[Mod_id][CC_id]->X_u); - - - fp->pucch_config_common.deltaPUCCH_Shift = 1+radioResourceConfigCommon->pucch_ConfigCommon->deltaPUCCH_Shift; - fp->pucch_config_common.nRB_CQI = radioResourceConfigCommon->pucch_ConfigCommon->nRB_CQI; - fp->pucch_config_common.nCS_AN = radioResourceConfigCommon->pucch_ConfigCommon->nCS_AN; - fp->pucch_config_common.n1PUCCH_AN = radioResourceConfigCommon->pucch_ConfigCommon->n1PUCCH_AN; - fp->pdsch_config_common.referenceSignalPower = radioResourceConfigCommon->pdsch_ConfigCommon->referenceSignalPower; - fp->pdsch_config_common.p_b = radioResourceConfigCommon->pdsch_ConfigCommon->p_b; - - - fp->pusch_config_common.n_SB = radioResourceConfigCommon->pusch_ConfigCommon.pusch_ConfigBasic.n_SB; - fp->pusch_config_common.hoppingMode = radioResourceConfigCommon->pusch_ConfigCommon.pusch_ConfigBasic.hoppingMode; - fp->pusch_config_common.pusch_HoppingOffset = radioResourceConfigCommon->pusch_ConfigCommon.pusch_ConfigBasic.pusch_HoppingOffset; - fp->pusch_config_common.enable64QAM = radioResourceConfigCommon->pusch_ConfigCommon.pusch_ConfigBasic.enable64QAM; - fp->pusch_config_common.ul_ReferenceSignalsPUSCH.groupHoppingEnabled = radioResourceConfigCommon->pusch_ConfigCommon.ul_ReferenceSignalsPUSCH.groupHoppingEnabled; - fp->pusch_config_common.ul_ReferenceSignalsPUSCH.groupAssignmentPUSCH = radioResourceConfigCommon->pusch_ConfigCommon.ul_ReferenceSignalsPUSCH.groupAssignmentPUSCH; - fp->pusch_config_common.ul_ReferenceSignalsPUSCH.sequenceHoppingEnabled = radioResourceConfigCommon->pusch_ConfigCommon.ul_ReferenceSignalsPUSCH.sequenceHoppingEnabled; - fp->pusch_config_common.ul_ReferenceSignalsPUSCH.cyclicShift = radioResourceConfigCommon->pusch_ConfigCommon.ul_ReferenceSignalsPUSCH.cyclicShift; - - init_ul_hopping(fp); - fp->soundingrs_ul_config_common.enabled_flag = 0; - - if (radioResourceConfigCommon->soundingRS_UL_ConfigCommon->present==SoundingRS_UL_ConfigCommon_PR_setup) { - fp->soundingrs_ul_config_common.enabled_flag = 1; - fp->soundingrs_ul_config_common.srs_BandwidthConfig = radioResourceConfigCommon->soundingRS_UL_ConfigCommon->choice.setup.srs_BandwidthConfig; - fp->soundingrs_ul_config_common.srs_SubframeConfig = radioResourceConfigCommon->soundingRS_UL_ConfigCommon->choice.setup.srs_SubframeConfig; - fp->soundingrs_ul_config_common.ackNackSRS_SimultaneousTransmission = radioResourceConfigCommon->soundingRS_UL_ConfigCommon->choice.setup.ackNackSRS_SimultaneousTransmission; - - if (radioResourceConfigCommon->soundingRS_UL_ConfigCommon->choice.setup.srs_MaxUpPts) - fp->soundingrs_ul_config_common.srs_MaxUpPts = 1; - else - fp->soundingrs_ul_config_common.srs_MaxUpPts = 0; - } - - fp->ul_power_control_config_common.p0_NominalPUSCH = radioResourceConfigCommon->uplinkPowerControlCommon->p0_NominalPUSCH; - fp->ul_power_control_config_common.alpha = radioResourceConfigCommon->uplinkPowerControlCommon->alpha; - fp->ul_power_control_config_common.p0_NominalPUCCH = radioResourceConfigCommon->uplinkPowerControlCommon->p0_NominalPUCCH; - fp->ul_power_control_config_common.deltaPreambleMsg3 = radioResourceConfigCommon->uplinkPowerControlCommon->deltaPreambleMsg3; - fp->ul_power_control_config_common.deltaF_PUCCH_Format1 = radioResourceConfigCommon->uplinkPowerControlCommon->deltaFList_PUCCH.deltaF_PUCCH_Format1; - fp->ul_power_control_config_common.deltaF_PUCCH_Format1b = radioResourceConfigCommon->uplinkPowerControlCommon->deltaFList_PUCCH.deltaF_PUCCH_Format1b; - fp->ul_power_control_config_common.deltaF_PUCCH_Format2 = radioResourceConfigCommon->uplinkPowerControlCommon->deltaFList_PUCCH.deltaF_PUCCH_Format2; - fp->ul_power_control_config_common.deltaF_PUCCH_Format2a = radioResourceConfigCommon->uplinkPowerControlCommon->deltaFList_PUCCH.deltaF_PUCCH_Format2a; - fp->ul_power_control_config_common.deltaF_PUCCH_Format2b = radioResourceConfigCommon->uplinkPowerControlCommon->deltaFList_PUCCH.deltaF_PUCCH_Format2b; - - fp->maxHARQ_Msg3Tx = radioResourceConfigCommon->rach_ConfigCommon->maxHARQ_Msg3Tx; - - // Now configure some of the Physical Channels - if (radioResourceConfigCommon->antennaInfoCommon) - fp->nb_antennas_tx = (1<antennaInfoCommon->antennaPortsCount); - else - fp->nb_antennas_tx = 1; - - //PHICH - if (radioResourceConfigCommon->antennaInfoCommon) { - fp->phich_config_common.phich_resource = radioResourceConfigCommon->phich_Config->phich_Resource; - fp->phich_config_common.phich_duration = radioResourceConfigCommon->phich_Config->phich_Duration; - } - - //Target CellId - fp->Nid_cell = mobilityControlInfo->targetPhysCellId; - fp->nushift = fp->Nid_cell%6; - - // PUCCH - init_ncs_cell(fp,PHY_vars_UE_g[Mod_id][CC_id]->ncs_cell); - - init_ul_hopping(fp); - - // RNTI - - - PHY_vars_UE_g[Mod_id][CC_id]->pdcch_vars[0][gNB_id]->crnti = mobilityControlInfo->newUE_Identity.buf[0]|(mobilityControlInfo->newUE_Identity.buf[1]<<8); - PHY_vars_UE_g[Mod_id][CC_id]->pdcch_vars[1][gNB_id]->crnti = mobilityControlInfo->newUE_Identity.buf[0]|(mobilityControlInfo->newUE_Identity.buf[1]<<8); - - LOG_I(PHY,"SET C-RNTI %x %x\n",PHY_vars_UE_g[Mod_id][CC_id]->pdcch_vars[0][gNB_id]->crnti, - PHY_vars_UE_g[Mod_id][CC_id]->pdcch_vars[1][gNB_id]->crnti); - } - - if(ho_failed) { - LOG_D(PHY,"[UE%d] Handover failed, triggering RACH procedure\n",Mod_id); - memcpy((void *)&PHY_vars_UE_g[Mod_id][CC_id]->frame_parms,(void *)&PHY_vars_UE_g[Mod_id][CC_id]->frame_parms_before_ho, sizeof(NR_DL_FRAME_PARMS)); - PHY_vars_UE_g[Mod_id][CC_id]->UE_mode[gNB_id] = PRACH; - } -} - - -void phy_config_meas_ue(uint8_t Mod_id,uint8_t CC_id,uint8_t eNB_index,uint8_t n_adj_cells,unsigned int *adj_cell_id) -{ - - PHY_NR_MEASUREMENTS *phy_meas = &PHY_vars_UE_g[Mod_id][CC_id]->measurements; - int i; - - LOG_I(PHY,"Configuring inter-cell measurements for %d cells, ids: \n",n_adj_cells); - - for (i=0; iframe_parms,PHY_vars_UE_g[Mod_id][CC_id]->lte_gold_table[i+1],adj_cell_id[i]); - } - - phy_meas->n_adj_cells = n_adj_cells; - memcpy((void*)phy_meas->adj_cell_id,(void *)adj_cell_id,n_adj_cells*sizeof(unsigned int)); - -} -*/ - - #if 0 void phy_config_harq_ue(module_id_t Mod_id, int CC_id, diff --git a/openair1/PHY/defs_nr_UE.h b/openair1/PHY/defs_nr_UE.h index 6e5570270c..4a56195888 100644 --- a/openair1/PHY/defs_nr_UE.h +++ b/openair1/PHY/defs_nr_UE.h @@ -46,9 +46,8 @@ #include "common_lib.h" #include "msc.h" #include "fapi_nr_ue_interface.h" - -//#include #include "assertions.h" + #ifdef MEX #define msg mexPrintf #else @@ -79,9 +78,6 @@ #define openair_free(y,x) free((y)) #define PAGE_SIZE 4096 -//#define RX_NB_TH_MAX 3 -//#define RX_NB_TH 3 - #ifdef NR_UNIT_TEST #define FILE_NAME " " #define LINE_FILE (0) @@ -92,53 +88,19 @@ #define NR_TST_PHY_PRINTF(...) #endif -//#ifdef SHRLIBDEV -//extern int rxrescale; -//#define RX_IQRESCALELEN rxrescale -//#else -//#define RX_IQRESCALELEN 15 -//#endif - -//! \brief Allocate \c size bytes of memory on the heap with alignment 16 and zero it afterwards. -//! If no more memory is available, this function will terminate the program with an assertion error. -/*static inline void* malloc16_clear( size_t size ) -{ -#ifdef __AVX2__ - void* ptr = memalign(32, size); -#else - void* ptr = memalign(16, size); -#endif - DevAssert(ptr); - memset( ptr, 0, size ); - return ptr; -}*/ - - - #define PAGE_MASK 0xfffff000 #define virt_to_phys(x) (x) - #define openair_sched_exit() exit(-1) - -//#define max(a,b) ((a)>(b) ? (a) : (b)) -//#define min(a,b) ((a)<(b) ? (a) : (b)) - - #define bzero(s,n) (memset((s),0,(n))) - #define cmax(a,b) ((a>b) ? (a) : (b)) #define cmin(a,b) ((ac) ? (cmax(a,b)) : (c)) - /// suppress compiler warning for unused arguments #define UNUSED(x) (void)x; - #include "impl_defs_top.h" #include "impl_defs_nr.h" - #include "PHY/TOOLS/time_meas.h" #include "PHY/CODING/coding_defs.h" #include "PHY/TOOLS/tools_defs.h" @@ -146,16 +108,11 @@ #include "NR_UE_TRANSPORT/nr_transport_ue.h" #if defined(UPGRADE_RAT_NR) - #include "PHY/NR_REFSIG/ss_pbch_nr.h" - #endif #include "PHY/NR_UE_TRANSPORT/dci_nr.h" -//#include "PHY/LTE_TRANSPORT/defs.h" -//#include "PHY/NR_UE_TRANSPORT/defs_nr.h" #include - #include "targets/ARCH/COMMON/common_lib.h" #ifndef NO_RAT_NR @@ -187,9 +144,6 @@ typedef enum { #define debug_msg if (((mac_xface->frame%100) == 0) || (mac_xface->frame < 50)) msg typedef struct { - //unsigned int rx_power[NUMBER_OF_CONNECTED_eNB_MAX][NB_ANTENNAS_RX]; //! estimated received signal power (linear) - //unsigned short rx_power_dB[NUMBER_OF_CONNECTED_eNB_MAX][NB_ANTENNAS_RX]; //! estimated received signal power (dB) - //unsigned short rx_avg_power_dB[NUMBER_OF_CONNECTED_eNB_MAX]; //! estimated avg received signal power (dB) // RRC measurements uint32_t rssi; @@ -859,19 +813,6 @@ typedef struct { fapi_nr_config_request_t nrUE_config; - // the following structures are not part of PHY_vars_UE anymore as it is not thread safe. They are now on the stack of the functions that actually need them - - //nr_downlink_indication_t dl_indication; - //nr_uplink_indication_t ul_indication; - /// UE FAPI DCI request - //nr_dcireq_t dcireq; - - // pointers to the next 2 strcutres are also included in dl_indictation - /// UE FAPI indication for DLSCH reception - //fapi_nr_rx_indication_t rx_ind; - /// UE FAPI indication for DCI reception - //fapi_nr_dci_indication_t dci_ind; - t_nrPolar_params *polarList; NR_UE_PDSCH *pdsch_vars[RX_NB_TH_MAX][NUMBER_OF_CONNECTED_eNB_MAX+1]; // two RxTx Threads NR_UE_PBCH *pbch_vars[NUMBER_OF_CONNECTED_eNB_MAX]; @@ -1147,7 +1088,6 @@ typedef struct { } PHY_VARS_NR_UE; - /* this structure is used to pass both UE phy vars and * proc to the function UE_thread_rxn_txnp4 */ @@ -1160,81 +1100,12 @@ typedef struct syncData_s { UE_nr_rxtx_proc_t proc; PHY_VARS_NR_UE *UE; } syncData_t; -/*static inline int wait_on_condition(pthread_mutex_t *mutex,pthread_cond_t *cond,int *instance_cnt,char *name) { - if (pthread_mutex_lock(mutex) != 0) { - LOG_E( PHY, "[SCHED][eNB] error locking mutex for %s\n",name); - exit_fun("nothing to add"); - return(-1); - } - - while (*instance_cnt < 0) { - // most of the time the thread is waiting here - // proc->instance_cnt_rxtx is -1 - pthread_cond_wait(cond,mutex); // this unlocks mutex_rxtx while waiting and then locks it again - } - - if (pthread_mutex_unlock(mutex) != 0) { - LOG_E(PHY,"[SCHED][eNB] error unlocking mutex for %s\n",name); - exit_fun("nothing to add"); - return(-1); - } - return(0); -} - -static inline int wait_on_busy_condition(pthread_mutex_t *mutex,pthread_cond_t *cond,int *instance_cnt,char *name) { - - if (pthread_mutex_lock(mutex) != 0) { - LOG_E( PHY, "[SCHED][eNB] error locking mutex for %s\n",name); - exit_fun("nothing to add"); - return(-1); - } - - while (*instance_cnt == 0) { - // most of the time the thread will skip this - // waits only if proc->instance_cnt_rxtx is 0 - pthread_cond_wait(cond,mutex); // this unlocks mutex_rxtx while waiting and then locks it again - } - - if (pthread_mutex_unlock(mutex) != 0) { - LOG_E(PHY,"[SCHED][eNB] error unlocking mutex for %s\n",name); - exit_fun("nothing to add"); - return(-1); - } - return(0); -} - -static inline int release_thread(pthread_mutex_t *mutex,int *instance_cnt,char *name) { - - if (pthread_mutex_lock(mutex) != 0) { - LOG_E( PHY, "[SCHED][eNB] error locking mutex for %s\n",name); - exit_fun("nothing to add"); - return(-1); - } - - *instance_cnt=*instance_cnt-1; - - if (pthread_mutex_unlock(mutex) != 0) { - LOG_E( PHY, "[SCHED][eNB] error unlocking mutex for %s\n",name); - exit_fun("nothing to add"); - return(-1); - } - return(0); -} -*/ typedef enum { pss = 0, pbch = 1, si = 2 } sync_mode_t; - -/* -#include "PHY/INIT/defs.h" -#include "PHY/LTE_REFSIG/defs.h" -#include "PHY/MODULATION/defs.h" -#include "PHY/LTE_TRANSPORT/proto.h" -#include "PHY/LTE_ESTIMATION/defs.h" -*/ #include "SIMULATION/ETH_TRANSPORT/defs.h" #endif diff --git a/openair1/SCHED_NR_UE/phy_procedures_nr_ue.c b/openair1/SCHED_NR_UE/phy_procedures_nr_ue.c index 1e588b1103..08d70d2074 100644 --- a/openair1/SCHED_NR_UE/phy_procedures_nr_ue.c +++ b/openair1/SCHED_NR_UE/phy_procedures_nr_ue.c @@ -204,6 +204,7 @@ void nr_process_timing_advance_rar(PHY_VARS_NR_UE *ue, int frame_rx, int nr_slot void phy_procedures_nrUE_TX(PHY_VARS_NR_UE *ue, UE_nr_rxtx_proc_t *proc, uint8_t gNB_id) { + int slot_tx = proc->nr_slot_tx; int frame_tx = proc->frame_tx; runmode_t mode = normal_txrx; @@ -237,11 +238,9 @@ void phy_procedures_nrUE_TX(PHY_VARS_NR_UE *ue, nr_ue_pusch_common_procedures(ue, slot_tx, &ue->frame_parms,1); - //ue->ulsch[proc->thread_id][gNB_id][0]->harq_processes[harq_pid]->pusch_pdu.nrOfLayers); - } - //LOG_M("txdata.m","txs",ue->common_vars.txdata[0],1228800,1,1); - /* RACH */ + } + if (get_softmodem_params()->do_ra==1) { if ((ue->UE_mode[gNB_id] > NOT_SYNCHED && ue->UE_mode[gNB_id] < PUSCH) && (ue->prach_vars[gNB_id]->prach_Config_enabled == 1)) { nr_ue_prach_procedures(ue, proc, gNB_id, mode); @@ -314,11 +313,7 @@ void nr_ue_pbch_procedures(uint8_t gNB_id, UE_nr_rxtx_proc_t *proc, uint8_t abstraction_flag) { - // int i; - //int pbch_tx_ant=0; int ret = 0; - //static uint8_t first_run = 1; - //uint8_t pbch_trials = 0; DevAssert(ue); diff --git a/openair2/LAYER2/NR_MAC_UE/config_ue.c b/openair2/LAYER2/NR_MAC_UE/config_ue.c index 66308e46fe..86f8ce5236 100755 --- a/openair2/LAYER2/NR_MAC_UE/config_ue.c +++ b/openair2/LAYER2/NR_MAC_UE/config_ue.c @@ -152,8 +152,7 @@ void config_common_ue(NR_UE_MAC_INST_t *mac, mac->phy_config.CC_id = cc_idP; // carrier config - - LOG_I(MAC, "Entering UE Config Common\n"); + LOG_D(MAC, "Entering UE Config Common\n"); cfg->carrier_config.dl_bandwidth = config_bandwidth(scc->downlinkConfigCommon->frequencyInfoDL->scs_SpecificCarrierList.list.array[0]->subcarrierSpacing, scc->downlinkConfigCommon->frequencyInfoDL->scs_SpecificCarrierList.list.array[0]->carrierBandwidth, diff --git a/openair2/LAYER2/NR_MAC_UE/nr_ue_procedures.c b/openair2/LAYER2/NR_MAC_UE/nr_ue_procedures.c index 53bc5f31b9..d466f64ef3 100644 --- a/openair2/LAYER2/NR_MAC_UE/nr_ue_procedures.c +++ b/openair2/LAYER2/NR_MAC_UE/nr_ue_procedures.c @@ -1937,575 +1937,6 @@ void ue_contention_resolution(module_id_t module_id, uint8_t gNB_index, int cc_i } } -#if 0 -uint16_t nr_dci_format_size (PHY_VARS_NR_UE *ue, - uint8_t slot, - int p, - crc_scrambled_t crc_scrambled, - uint8_t dci_fields_sizes[NBR_NR_DCI_FIELDS][NBR_NR_FORMATS], - uint8_t format) { - LOG_DDD("crc_scrambled=%d, n_RB_ULBWP=%d, n_RB_DLBWP=%d\n",crc_scrambled,n_RB_ULBWP,n_RB_DLBWP); - /* - * function nr_dci_format_size calculates and returns the size in bits of a determined format - * it also returns an bi-dimensional array 'dci_fields_sizes' with x rows and y columns, where: - * x is the number of fields defined in TS 38.212 subclause 7.3.1 (Each field is mapped in the order in which it appears in the description in the specification) - * y is the number of formats - * e.g.: dci_fields_sizes[10][0] contains the size in bits of the field FREQ_DOM_RESOURCE_ASSIGNMENT_UL for format 0_0 - */ - // pdsch_config contains the PDSCH-Config IE is used to configure the UE specific PDSCH parameters (TS 38.331) - PDSCH_Config_t pdsch_config = ue->PDSCH_Config; - // pusch_config contains the PUSCH-Config IE is used to configure the UE specific PUSCH parameters (TS 38.331) - PUSCH_Config_t pusch_config = ue->pusch_config; - PUCCH_Config_t pucch_config_dedicated = ue->pucch_config_dedicated_nr[eNB_id]; - crossCarrierSchedulingConfig_t crossCarrierSchedulingConfig = ue->crossCarrierSchedulingConfig; - dmrs_UplinkConfig_t dmrs_UplinkConfig = ue->dmrs_UplinkConfig; - dmrs_DownlinkConfig_t dmrs_DownlinkConfig = ue->dmrs_DownlinkConfig; - csi_MeasConfig_t csi_MeasConfig = ue->csi_MeasConfig; - PUSCH_ServingCellConfig_t PUSCH_ServingCellConfig= ue->PUSCH_ServingCellConfig; - PDSCH_ServingCellConfig_t PDSCH_ServingCellConfig= ue->PDSCH_ServingCellConfig; - NR_UE_PDCCH *pdcch_vars2 = ue->pdcch_vars[proc->thread_id][eNB_id]; - // 1 CARRIER_IN - // crossCarrierSchedulingConfig from higher layers, variable crossCarrierSchedulingConfig indicates if 'cross carrier scheduling' is enabled or not: - // if No cross carrier scheduling: number of bits for CARRIER_IND is 0 - // if Cross carrier scheduling: number of bits for CARRIER_IND is 3 - // The IE CrossCarrierSchedulingConfig is used to specify the configuration when the cross-carrier scheduling is used in a cell - uint8_t crossCarrierSchedulingConfig_ind = 0; - - if (crossCarrierSchedulingConfig.schedulingCellInfo.other.cif_InSchedulingCell !=0 ) crossCarrierSchedulingConfig_ind=1; - - // 2 SUL_IND_0_1, // 40 SRS_REQUEST, // 50 SUL_IND_0_0 - // UL/SUL indicator (TS 38.331, supplementary uplink is indicated in higher layer parameter ServCellAdd-SUL from IE ServingCellConfig and ServingCellConfigCommon): - // 0 bit for UEs not configured with SUL in the cell or UEs configured with SUL in the cell but only PUCCH carrier in the cell is configured for PUSCH transmission - // 1 bit for UEs configured with SUL in the cell as defined in Table 7.3.1.1.1-1 - // sul_ind indicates whether SUL is configured in cell or not - uint8_t sul_ind=ue->supplementaryUplink.supplementaryUplink; // this value will be 0 or 1 depending on higher layer parameter ServCellAdd-SUL. FIXME!!! - // 7 BANDWIDTH_PART_IND - // number of UL BWPs configured by higher layers - uint8_t n_UL_BWP_RRC=1; // initialized to 1 but it has to be initialized by higher layers FIXME!!! - n_UL_BWP_RRC = ((n_UL_BWP_RRC > 3)?n_UL_BWP_RRC:(n_UL_BWP_RRC+1)); - // number of DL BWPs configured by higher layers - uint8_t n_DL_BWP_RRC=1; // initialized to 1 but it has to be initialized by higher layers FIXME!!! - n_DL_BWP_RRC = ((n_DL_BWP_RRC > 3)?n_DL_BWP_RRC:(n_DL_BWP_RRC+1)); - // 10 FREQ_DOM_RESOURCE_ASSIGNMENT_UL - // if format0_0, only resource allocation type 1 is allowed - // if format0_1, then resource allocation type 0 can be configured and N_RBG is defined in TS 38.214 subclause 6.1.2.2.1 - // for PUSCH hopping with resource allocation type 1 - // n_UL_hopping = 1 if the higher layer parameter frequencyHoppingOffsetLists contains two offset values - // n_UL_hopping = 2 if the higher layer parameter frequencyHoppingOffsetLists contains four offset values - uint8_t n_UL_hopping=pusch_config.n_frequencyHoppingOffsetLists; - - if (n_UL_hopping == 2) { - n_UL_hopping = 1; - } else if (n_UL_hopping == 4) { - n_UL_hopping = 2; - } else { - n_UL_hopping = 0; - } - - ul_resourceAllocation_t ul_resource_allocation_type = pusch_config.ul_resourceAllocation; - uint8_t ul_res_alloc_type_0 = 0; - uint8_t ul_res_alloc_type_1 = 0; - - if (ul_resource_allocation_type == ul_resourceAllocationType0) ul_res_alloc_type_0 = 1; - - if (ul_resource_allocation_type == ul_resourceAllocationType1) ul_res_alloc_type_1 = 1; - - if (ul_resource_allocation_type == ul_dynamicSwitch) { - ul_res_alloc_type_0 = 1; - ul_res_alloc_type_1 = 1; - } - - uint8_t n_bits_freq_dom_res_assign_ul=0,n_ul_RGB_tmp; - - if (ul_res_alloc_type_0 == 1) { // implementation of Table 6.1.2.2.1-1 TC 38.214 subclause 6.1.2.2.1 - // config1: PUSCH-Config IE contains rbg-Size ENUMERATED {config1 config2} - ul_rgb_Size_t config = pusch_config.ul_rgbSize; - uint8_t nominal_RBG_P = (config==ul_rgb_config1?2:4); - - if (n_RB_ULBWP > 36) nominal_RBG_P = (config==ul_rgb_config1?4:8); - - if (n_RB_ULBWP > 72) nominal_RBG_P = (config==ul_rgb_config1?8:16); - - if (n_RB_ULBWP > 144) nominal_RBG_P = 16; - - n_bits_freq_dom_res_assign_ul = (uint8_t)ceil((n_RB_ULBWP+(0%nominal_RBG_P))/nominal_RBG_P); //FIXME!!! what is 0??? - n_ul_RGB_tmp = n_bits_freq_dom_res_assign_ul; - } - - if (ul_res_alloc_type_1 == 1) n_bits_freq_dom_res_assign_ul = (uint8_t)(ceil(log2(n_RB_ULBWP*(n_RB_ULBWP+1)/2)))-n_UL_hopping; - - if ((ul_res_alloc_type_0 == 1) && (ul_res_alloc_type_1 == 1)) - n_bits_freq_dom_res_assign_ul = ((n_bits_freq_dom_res_assign_ul>n_ul_RGB_tmp)?(n_bits_freq_dom_res_assign_ul+1):(n_ul_RGB_tmp+1)); - - // 11 FREQ_DOM_RESOURCE_ASSIGNMENT_DL - // if format1_0, only resource allocation type 1 is allowed - // if format1_1, then resource allocation type 0 can be configured and N_RBG is defined in TS 38.214 subclause 5.1.2.2.1 - dl_resourceAllocation_t dl_resource_allocation_type = pdsch_config.dl_resourceAllocation; - uint8_t dl_res_alloc_type_0 = 0; - uint8_t dl_res_alloc_type_1 = 0; - - if (dl_resource_allocation_type == dl_resourceAllocationType0) dl_res_alloc_type_0 = 1; - - if (dl_resource_allocation_type == dl_resourceAllocationType1) dl_res_alloc_type_1 = 1; - - if (dl_resource_allocation_type == dl_dynamicSwitch) { - dl_res_alloc_type_0 = 1; - dl_res_alloc_type_1 = 1; - } - - uint8_t n_bits_freq_dom_res_assign_dl=0,n_dl_RGB_tmp; - - if (dl_res_alloc_type_0 == 1) { // implementation of Table 5.1.2.2.1-1 TC 38.214 subclause 6.1.2.2.1 - // config1: PDSCH-Config IE contains rbg-Size ENUMERATED {config1, config2} - dl_rgb_Size_t config = pdsch_config.dl_rgbSize; - uint8_t nominal_RBG_P = (config==dl_rgb_config1?2:4); - - if (n_RB_DLBWP > 36) nominal_RBG_P = (config==dl_rgb_config1?4:8); - - if (n_RB_DLBWP > 72) nominal_RBG_P = (config==dl_rgb_config1?8:16); - - if (n_RB_DLBWP > 144) nominal_RBG_P = 16; - - n_bits_freq_dom_res_assign_dl = (uint8_t)ceil((n_RB_DLBWP+(0%nominal_RBG_P))/nominal_RBG_P); //FIXME!!! what is 0??? - n_dl_RGB_tmp = n_bits_freq_dom_res_assign_dl; - } - - if (dl_res_alloc_type_1 == 1) n_bits_freq_dom_res_assign_dl = (uint8_t)(ceil(log2(n_RB_DLBWP*(n_RB_DLBWP+1)/2))); - - if ((dl_res_alloc_type_0 == 1) && (dl_res_alloc_type_1 == 1)) - n_bits_freq_dom_res_assign_dl = ((n_bits_freq_dom_res_assign_dl>n_dl_RGB_tmp)?(n_bits_freq_dom_res_assign_dl+1):(n_dl_RGB_tmp+1)); - - // 12 TIME_DOM_RESOURCE_ASSIGNMENT - uint8_t pusch_alloc_list = pusch_config.n_push_alloc_list; - uint8_t pdsch_alloc_list = pdsch_config.n_pdsh_alloc_list; - // 14 PRB_BUNDLING_SIZE_IND:0 bit if the higher layer parameter PRB_bundling is not configured or is set to 'static', or 1 bit if the higher layer parameter PRB_bundling is set to 'dynamic' according to Subclause 5.1.2.3 of [6, TS 38.214] - static_bundleSize_t static_prb_BundlingType = pdsch_config.prbBundleType.staticBundling; - bundleSizeSet1_t dynamic_prb_BundlingType1 = pdsch_config.prbBundleType.dynamicBundlig.bundleSizeSet1; - bundleSizeSet2_t dynamic_prb_BundlingType2 = pdsch_config.prbBundleType.dynamicBundlig.bundleSizeSet2; - uint8_t prb_BundlingType_size=0; - - if ((static_prb_BundlingType==st_n4)||(static_prb_BundlingType==st_wideband)) prb_BundlingType_size=0; - - if ((dynamic_prb_BundlingType1==dy_1_n4)||(dynamic_prb_BundlingType1==dy_1_wideband)||(dynamic_prb_BundlingType1==dy_1_n2_wideband)||(dynamic_prb_BundlingType1==dy_1_n4_wideband)|| - (dynamic_prb_BundlingType2==dy_2_n4)||(dynamic_prb_BundlingType2==dy_2_wideband)) prb_BundlingType_size=1; - - // 15 RATE_MATCHING_IND FIXME!!! - // according to TS 38.212: Rate matching indicator  E0, 1, or 2 bits according to higher layer parameter rateMatchPattern - uint8_t rateMatching_bits = pdsch_config.n_rateMatchPatterns; - // 16 ZP_CSI_RS_TRIGGER FIXME!!! - // 0, 1, or 2 bits as defined in Subclause 5.1.4.2 of [6, TS 38.214]. - // is the number of ZP CSI-RS resource sets in the higher layer parameter zp-CSI-RS-Resource - uint8_t n_zp_bits = pdsch_config.n_zp_CSI_RS_ResourceId; - // 17 FREQ_HOPPING_FLAG - // freqHopping is defined by higher layer parameter frequencyHopping from IE PUSCH-Config. Values are ENUMERATED{mode1, mode2} - frequencyHopping_t f_hopping = pusch_config.frequencyHopping; - uint8_t freqHopping = 0; - - if ((f_hopping==f_hop_mode1)||(f_hopping==f_hop_mode2)) freqHopping = 1; - - // 28 DAI - pdsch_HARQ_ACK_Codebook_t pdsch_HARQ_ACK_Codebook = pdsch_config.pdsch_HARQ_ACK_Codebook; - uint8_t n_dai = 0; - uint8_t n_serving_cell_dl = 1; // this is hardcoded to 1 as we need to get this value from RRC higher layers parameters. FIXME!!! - - if ((pdsch_HARQ_ACK_Codebook == dynamic) && (n_serving_cell_dl == 1)) n_dai = 2; - - if ((pdsch_HARQ_ACK_Codebook == dynamic) && (n_serving_cell_dl > 1)) n_dai = 4; - - // 29 FIRST_DAI - uint8_t codebook_HARQ_ACK = 0; // We need to get this value to calculate number of bits of fields 1st DAI and 2nd DAI. - - if (pdsch_HARQ_ACK_Codebook == semiStatic) codebook_HARQ_ACK = 1; - - if (pdsch_HARQ_ACK_Codebook == dynamic) codebook_HARQ_ACK = 2; - - // 30 SECOND_DAI - uint8_t n_HARQ_ACK_sub_codebooks = 0; // We need to get this value to calculate number of bits of fields 1st DAI and 2nd DAI. FIXME!!! - // 35 PDSCH_TO_HARQ_FEEDBACK_TIME_IND - uint8_t pdsch_harq_t_ind = (uint8_t)ceil(log2(pucch_config_dedicated.dl_DataToUL_ACK[0])); - // 36 SRS_RESOURCE_IND - // n_SRS is the number of configured SRS resources in the SRS resource set associated with the higher layer parameter usage of value 'codeBook' or 'nonCodeBook' - // from SRS_ResourceSet_t type we should get the information of the usage parameter (with possible values beamManagement, codebook, nonCodebook, antennaSwitching) - // at frame_parms->srs_nr->p_SRS_ResourceSetList[]->usage - uint8_t n_SRS = ue->srs.number_srs_Resource_Set; - // 37 PRECOD_NBR_LAYERS - // 38 ANTENNA_PORTS - txConfig_t txConfig = pusch_config.txConfig; - transformPrecoder_t transformPrecoder = pusch_config.transformPrecoder; - codebookSubset_t codebookSubset = pusch_config.codebookSubset; - uint8_t maxRank = pusch_config.maxRank; - uint8_t num_antenna_ports = 1; // this is hardcoded. We need to get the real value FIXME!!! - uint8_t precond_nbr_layers_bits = 0; - uint8_t antenna_ports_bits_ul = 0; - - // searching number of bits at tables 7.3.1.1.2-2/3/4/5 from TS 38.212 subclause 7.3.1.1.2 - if (txConfig == txConfig_codebook) { - if (num_antenna_ports == 4) { - if ((transformPrecoder == transformPrecoder_disabled) && ((maxRank == 2)||(maxRank == 3)||(maxRank == 4))) { // Table 7.3.1.1.2-2 - if (codebookSubset == codebookSubset_fullyAndPartialAndNonCoherent) precond_nbr_layers_bits=6; - - if (codebookSubset == codebookSubset_partialAndNonCoherent) precond_nbr_layers_bits=5; - - if (codebookSubset == codebookSubset_nonCoherent) precond_nbr_layers_bits=4; - } - - if (((transformPrecoder == transformPrecoder_enabled)||(transformPrecoder == transformPrecoder_disabled)) && (maxRank == 1)) { // Table 7.3.1.1.2-3 - if (codebookSubset == codebookSubset_fullyAndPartialAndNonCoherent) precond_nbr_layers_bits=5; - - if (codebookSubset == codebookSubset_partialAndNonCoherent) precond_nbr_layers_bits=4; - - if (codebookSubset == codebookSubset_nonCoherent) precond_nbr_layers_bits=2; - } - } - - if (num_antenna_ports == 2) { - if ((transformPrecoder == transformPrecoder_disabled) && (maxRank == 2)) { // Table 7.3.1.1.2-4 - if (codebookSubset == codebookSubset_fullyAndPartialAndNonCoherent) precond_nbr_layers_bits=4; - - if (codebookSubset == codebookSubset_nonCoherent) precond_nbr_layers_bits=2; - } - - if (((transformPrecoder == transformPrecoder_enabled)||(transformPrecoder == transformPrecoder_disabled)) && (maxRank == 1)) { // Table 7.3.1.1.2-5 - if (codebookSubset == codebookSubset_fullyAndPartialAndNonCoherent) precond_nbr_layers_bits=3; - - if (codebookSubset == codebookSubset_nonCoherent) precond_nbr_layers_bits=1; - } - } - } - - if (txConfig == txConfig_nonCodebook) { - } - - // searching number of bits at tables 7.3.1.1.2-6/7/8/9/10/11/12/13/14/15/16/17/18/19 - if((dmrs_UplinkConfig.pusch_dmrs_type == pusch_dmrs_type1)) { - if ((transformPrecoder == transformPrecoder_enabled) && (dmrs_UplinkConfig.pusch_maxLength == pusch_len1)) antenna_ports_bits_ul = 2; - - if ((transformPrecoder == transformPrecoder_enabled) && (dmrs_UplinkConfig.pusch_maxLength == pusch_len2)) antenna_ports_bits_ul = 4; - - if ((transformPrecoder == transformPrecoder_disabled) && (dmrs_UplinkConfig.pusch_maxLength == pusch_len1)) antenna_ports_bits_ul = 3; - - if ((transformPrecoder == transformPrecoder_disabled) && (dmrs_UplinkConfig.pusch_maxLength == pusch_len2)) antenna_ports_bits_ul = 4; - } - - if((dmrs_UplinkConfig.pusch_dmrs_type == pusch_dmrs_type2)) { - if ((transformPrecoder == transformPrecoder_disabled) && (dmrs_UplinkConfig.pusch_maxLength == pusch_len1)) antenna_ports_bits_ul = 4; - - if ((transformPrecoder == transformPrecoder_disabled) && (dmrs_UplinkConfig.pusch_maxLength == pusch_len2)) antenna_ports_bits_ul = 5; - } - - // for format 1_1 number of bits as defined by Tables 7.3.1.2.2-1/2/3/4 - uint8_t antenna_ports_bits_dl = 0; - - if((dmrs_DownlinkConfig.pdsch_dmrs_type == pdsch_dmrs_type1) && (dmrs_DownlinkConfig.pdsch_maxLength == pdsch_len1)) antenna_ports_bits_dl = 4; // Table 7.3.1.2.2-1 - - if((dmrs_DownlinkConfig.pdsch_dmrs_type == pdsch_dmrs_type1) && (dmrs_DownlinkConfig.pdsch_maxLength == pdsch_len2)) antenna_ports_bits_dl = 5; // Table 7.3.1.2.2-2 - - if((dmrs_DownlinkConfig.pdsch_dmrs_type == pdsch_dmrs_type2) && (dmrs_DownlinkConfig.pdsch_maxLength == pdsch_len1)) antenna_ports_bits_dl = 5; // Table 7.3.1.2.2-3 - - if((dmrs_DownlinkConfig.pdsch_dmrs_type == pdsch_dmrs_type2) && (dmrs_DownlinkConfig.pdsch_maxLength == pdsch_len2)) antenna_ports_bits_dl = 6; // Table 7.3.1.2.2-4 - - // 39 TCI - uint8_t tci_bits=0; - - if (pdcch_vars2->coreset[p].tciPresentInDCI == tciPresentInDCI_enabled) tci_bits=3; - - // 42 CSI_REQUEST - // reportTriggerSize is defined in the CSI-MeasConfig IE (TS 38.331). - // Size of CSI request field in DCI (bits). Corresponds to L1 parameter 'ReportTriggerSize' (see 38.214, section 5.2) - uint8_t reportTriggerSize = csi_MeasConfig.reportTriggerSize; // value from 0..6 - // 43 CBGTI - // for format 0_1 - uint8_t maxCodeBlockGroupsPerTransportBlock = 0; - - if (PUSCH_ServingCellConfig.maxCodeBlockGroupsPerTransportBlock != 0) - maxCodeBlockGroupsPerTransportBlock = (uint8_t)PUSCH_ServingCellConfig.maxCodeBlockGroupsPerTransportBlock; - - // for format 1_1, as defined in Subclause 5.1.7 of [6, TS38.214] - uint8_t maxCodeBlockGroupsPerTransportBlock_dl = 0; - - if (PDSCH_ServingCellConfig.maxCodeBlockGroupsPerTransportBlock_dl != 0) - maxCodeBlockGroupsPerTransportBlock_dl = pdsch_config.maxNrofCodeWordsScheduledByDCI; // FIXME!!! - - // 44 CBGFI - uint8_t cbgfi_bit = PDSCH_ServingCellConfig.codeBlockGroupFlushIndicator; - // 45 PTRS_DMRS - // 0 bit if PTRS-UplinkConfig is not configured and transformPrecoder=disabled, or if transformPrecoder=enabled, or if maxRank=1 - // 2 bits otherwise - uint8_t ptrs_dmrs_bits=0; //FIXME!!! - // 46 BETA_OFFSET_IND - // at IE PUSCH-Config, beta_offset indicator  E0 if the higher layer parameter betaOffsets = semiStatic; otherwise 2 bits - // uci-OnPUSCH - // Selection between and configuration of dynamic and semi-static beta-offset. If the field is absent or released, the UE applies the value 'semiStatic' and the BetaOffsets - uint8_t betaOffsets = 0; - - if (pusch_config.uci_onPusch.betaOffset_type == betaOffset_semiStatic); - - if (pusch_config.uci_onPusch.betaOffset_type == betaOffset_dynamic) betaOffsets = 2; - - // 47 DMRS_SEQ_INI - uint8_t dmrs_seq_ini_bits_ul = 0; - uint8_t dmrs_seq_ini_bits_dl = 0; - - //1 bit if both scramblingID0 and scramblingID1 are configured in DMRS-UplinkConfig - if ((transformPrecoder == transformPrecoder_disabled) && (dmrs_UplinkConfig.scramblingID0 != 0) && (dmrs_UplinkConfig.scramblingID1 != 0)) dmrs_seq_ini_bits_ul = 1; - - //1 bit if both scramblingID0 and scramblingID1 are configured in DMRS-DownlinkConfig - if ((dmrs_DownlinkConfig.scramblingID0 != 0) && (dmrs_DownlinkConfig.scramblingID0 != 0)) dmrs_seq_ini_bits_dl = 1; - - /* - * For format 2_2 - * - * This format supports power control commands for semi-persistent scheduling. - * As we can already support power control commands dynamically with formats 0_0/0_1 (TPC PUSCH) and 1_0/1_1 (TPC PUCCH) - * - * This format will be implemented in the future FIXME!!! - * - */ - // 5 BLOCK_NUMBER: The parameter tpc-PUSCH or tpc-PUCCH provided by higher layers determines the index to the block number for an UL of a cell - // The following fields are defined for each block: Closed loop indicator and TPC command - // 6 CLOSE_LOOP_IND - // 41 TPC_CMD - uint8_t tpc_cmd_bit_2_2 = 2; - /* - * For format 2_3 - * - * This format is used for power control of uplink sounding reference signals for devices which have not coupled SRS power control to the PUSCH power control - * either because independent control is desirable or because the device is configured without PUCCH and PUSCH - * - * This format will be implemented in the future FIXME!!! - * - */ - // 40 SRS_REQUEST - // 41 TPC_CMD - uint8_t tpc_cmd_bit_2_3 = 0; - uint8_t dci_field_size_table [NBR_NR_DCI_FIELDS][NBR_NR_FORMATS] = { // This table contains the number of bits for each field (row) contained in each dci format (column). - // The values of the variables indicate field sizes in number of bits - //Format0_0 Format0_1 Format1_0 Format1_1 Formats2_0/1/2/3 - { - 1, 1, (((crc_scrambled == _p_rnti) || (crc_scrambled == _si_rnti) || (crc_scrambled == _ra_rnti)) ? 0:1), - 1, 0,0,0,0 - }, // 0 IDENTIFIER_DCI_FORMATS: - { - 0, ((crossCarrierSchedulingConfig_ind == 0) ? 0:3), - 0, ((crossCarrierSchedulingConfig_ind == 0) ? 0:3), - 0,0,0,0 - }, // 1 CARRIER_IND: 0 or 3 bits, as defined in Subclause x.x of [5, TS38.213] - {0, (sul_ind == 0)?0:1, 0, 0, 0,0,0,0}, // 2 SUL_IND_0_1: - {0, 0, 0, 0, 1,0,0,0}, // 3 SLOT_FORMAT_IND: size of DCI format 2_0 is configurable by higher layers up to 128 bits, according to Subclause 11.1.1 of [5, TS 38.213] - {0, 0, 0, 0, 0,1,0,0}, // 4 PRE_EMPTION_IND: size of DCI format 2_1 is configurable by higher layers up to 126 bits, according to Subclause 11.2 of [5, TS 38.213]. Each pre-emption indication is 14 bits - {0, 0, 0, 0, 0,0,0,0}, // 5 BLOCK_NUMBER: starting position of a block is determined by the parameter startingBitOfFormat2_3 - {0, 0, 0, 0, 0,0,1,0}, // 6 CLOSE_LOOP_IND - { - 0, (uint8_t)ceil(log2(n_UL_BWP_RRC)), - 0, (uint8_t)ceil(log2(n_DL_BWP_RRC)), - 0,0,0,0 - }, // 7 BANDWIDTH_PART_IND: - { - 0, 0, ((crc_scrambled == _p_rnti) ? 2:0), - 0, 0,0,0,0 - }, // 8 SHORT_MESSAGE_IND 2 bits if crc scrambled with P-RNTI - { - 0, 0, ((crc_scrambled == _p_rnti) ? 8:0), - 0, 0,0,0,0 - }, // 9 SHORT_MESSAGES 8 bit8 if crc scrambled with P-RNTI - { - (uint8_t)(ceil(log2(n_RB_ULBWP*(n_RB_ULBWP+1)/2)))-n_UL_hopping, - n_bits_freq_dom_res_assign_ul, - 0, 0, 0,0,0,0 - }, // 10 FREQ_DOM_RESOURCE_ASSIGNMENT_UL: PUSCH hopping with resource allocation type 1 not considered - // (NOTE 1) If DCI format 0_0 is monitored in common search space - // and if the number of information bits in the DCI format 0_0 prior to padding - // is larger than the payload size of the DCI format 1_0 monitored in common search space - // the bitwidth of the frequency domain resource allocation field in the DCI format 0_0 - // is reduced such that the size of DCI format 0_0 equals to the size of the DCI format 1_0 - { - 0, 0, (uint8_t)ceil(log2(n_RB_DLBWP*(n_RB_DLBWP+1)/2)), - n_bits_freq_dom_res_assign_dl, - 0,0,0,0 - }, // 11 FREQ_DOM_RESOURCE_ASSIGNMENT_DL: - { - 4, (uint8_t)log2(pusch_alloc_list), - 4, (uint8_t)log2(pdsch_alloc_list), - 0,0,0,0 - }, // 12 TIME_DOM_RESOURCE_ASSIGNMENT: 0, 1, 2, 3, or 4 bits as defined in Subclause 6.1.2.1 of [6, TS 38.214]. The bitwidth for this field is determined as log2(I) bits, - // where I the number of entries in the higher layer parameter pusch-AllocationList - { - 0, 0, 1, (((dl_res_alloc_type_0==1) &&(dl_res_alloc_type_1==0))?0:1), - 0,0,0,0 - }, // 13 VRB_TO_PRB_MAPPING: 0 bit if only resource allocation type 0 - {0, 0, 0, prb_BundlingType_size, 0,0,0,0}, // 14 PRB_BUNDLING_SIZE_IND:0 bit if the higher layer parameter PRB_bundling is not configured or is set to 'static', or 1 bit if the higher layer parameter PRB_bundling is set to 'dynamic' according to Subclause 5.1.2.3 of [6, TS 38.214] - {0, 0, 0, rateMatching_bits, 0,0,0,0}, // 15 RATE_MATCHING_IND: 0, 1, or 2 bits according to higher layer parameter rate-match-PDSCH-resource-set - {0, 0, 0, n_zp_bits, 0,0,0,0}, // 16 ZP_CSI_RS_TRIGGER: - { - 1, (((ul_res_alloc_type_0==1) &&(ul_res_alloc_type_1==0))||(freqHopping == 0))?0:1, - 0, 0, 0,0,0,0 - }, // 17 FREQ_HOPPING_FLAG: 0 bit if only resource allocation type 0 - {0, 0, 0, 5, 0,0,0,0}, // 18 TB1_MCS: - {0, 0, 0, 1, 0,0,0,0}, // 19 TB1_NDI: - {0, 0, 0, 2, 0,0,0,0}, // 20 TB1_RV: - {0, 0, 0, 5, 0,0,0,0}, // 21 TB2_MCS: - {0, 0, 0, 1, 0,0,0,0}, // 22 TB2_NDI: - {0, 0, 0, 2, 0,0,0,0}, // 23 TB2_RV: - {5, 5, 5, 0, 0,0,0,0}, // 24 MCS: - {1, 1, (crc_scrambled == _c_rnti)?1:0,0, 0,0,0,0}, // 25 NDI: - { - 2, 2, (((crc_scrambled == _c_rnti) || (crc_scrambled == _si_rnti)) ? 2:0), - 0, 0,0,0,0 - }, // 26 RV: - {4, 4, (crc_scrambled == _c_rnti)?4:0,4, 0,0,0,0}, // 27 HARQ_PROCESS_NUMBER: - {0, 0, (crc_scrambled == _c_rnti)?2:0,n_dai, 0,0,0,0}, // 28 DAI: For format1_1: 4 if more than one serving cell are configured in the DL and the higher layer parameter HARQ-ACK-codebook=dynamic, where the 2 MSB bits are the counter DAI and the 2 LSB bits are the total DAI - // 2 if one serving cell is configured in the DL and the higher layer parameter HARQ-ACK-codebook=dynamic, where the 2 bits are the counter DAI - // 0 otherwise - {0, codebook_HARQ_ACK, 0, 0, 0,0,0,0}, // 29 FIRST_DAI: (1 or 2 bits) 1 bit for semi-static HARQ-ACK // 2 bits for dynamic HARQ-ACK codebook with single HARQ-ACK codebook - { - 0, (((codebook_HARQ_ACK == 2) &&(n_HARQ_ACK_sub_codebooks==2))?2:0), - 0, 0, 0,0,0,0 - }, // 30 SECOND_DAI: (0 or 2 bits) 2 bits for dynamic HARQ-ACK codebook with two HARQ-ACK sub-codebooks // 0 bits otherwise - { - 0, 0, (((crc_scrambled == _p_rnti) || (crc_scrambled == _ra_rnti)) ? 2:0), - 0, 0,0,0,0 - }, // 31 TB_SCALING - {2, 2, 0, 0, 0,0,0,0}, // 32 TPC_PUSCH: - {0, 0, (crc_scrambled == _c_rnti)?2:0,2, 0,0,0,0}, // 33 TPC_PUCCH: - {0, 0, (crc_scrambled == _c_rnti)?3:0,3, 0,0,0,0}, // 34 PUCCH_RESOURCE_IND: - {0, 0, (crc_scrambled == _c_rnti)?3:0,pdsch_harq_t_ind, 0,0,0,0}, // 35 PDSCH_TO_HARQ_FEEDBACK_TIME_IND: - {0, (uint8_t)log2(n_SRS), 0, 0, 0,0,0,0}, // 36 SRS_RESOURCE_IND: - {0, precond_nbr_layers_bits, 0, 0, 0,0,0,0}, // 37 PRECOD_NBR_LAYERS: - {0, antenna_ports_bits_ul, 0, antenna_ports_bits_dl, 0,0,0,0}, // 38 ANTENNA_PORTS: - {0, 0, 0, tci_bits, 0,0,0,0}, // 39 TCI: 0 bit if higher layer parameter tci-PresentInDCI is not enabled; otherwise 3 bits - {0, (sul_ind == 0)?2:3, 0, (sul_ind == 0)?2:3, 0,0,0,2}, // 40 SRS_REQUEST: - { - 0, 0, 0, 0, 0,0,tpc_cmd_bit_2_2, - tpc_cmd_bit_2_3 - }, - // 41 TPC_CMD: - {0, reportTriggerSize, 0, 0, 0,0,0,0}, // 42 CSI_REQUEST: - { - 0, maxCodeBlockGroupsPerTransportBlock, - 0, maxCodeBlockGroupsPerTransportBlock_dl, - 0,0,0,0 - }, // 43 CBGTI: 0, 2, 4, 6, or 8 bits determined by higher layer parameter maxCodeBlockGroupsPerTransportBlock for the PDSCH - {0, 0, 0, cbgfi_bit, 0,0,0,0}, // 44 CBGFI: 0 or 1 bit determined by higher layer parameter codeBlockGroupFlushIndicator - {0, ptrs_dmrs_bits, 0, 0, 0,0,0,0}, // 45 PTRS_DMRS: - {0, betaOffsets, 0, 0, 0,0,0,0}, // 46 BETA_OFFSET_IND: - {0, dmrs_seq_ini_bits_ul, 0, dmrs_seq_ini_bits_dl, 0,0,0,0}, // 47 DMRS_SEQ_INI: 1 bit if the cell has two ULs and the number of bits for DCI format 1_0 before padding - // is larger than the number of bits for DCI format 0_0 before padding; 0 bit otherwise - {0, 1, 0, 0, 0,0,0,0}, // 48 UL_SCH_IND: value of "1" indicates UL-SCH shall be transmitted on the PUSCH and a value of "0" indicates UL-SCH shall not be transmitted on the PUSCH - {0, 0, 0, 0, 0,0,0,0}, // 49 PADDING_NR_DCI: - // (NOTE 2) If DCI format 0_0 is monitored in common search space - // and if the number of information bits in the DCI format 0_0 prior to padding - // is less than the payload size of the DCI format 1_0 monitored in common search space - // zeros shall be appended to the DCI format 0_0 - // until the payload size equals that of the DCI format 1_0 - {(sul_ind == 0)?0:1, 0, 0, 0, 0,0,0,0}, // 50 SUL_IND_0_0: - {0, 0, 0, 0, 0,0,0,0}, // 51 RA_PREAMBLE_INDEX (random access procedure initiated by a PDCCH order not implemented, FIXME!!!) - {0, 0, 0, 0, 0,0,0,0}, // 52 SUL_IND_1_0 (random access procedure initiated by a PDCCH order not implemented, FIXME!!!) - {0, 0, 0, 0, 0,0,0,0}, // 53 SS_PBCH_INDEX (random access procedure initiated by a PDCCH order not implemented, FIXME!!!) - {0, 0, 0, 0, 0,0,0,0}, // 54 PRACH_MASK_INDEX (random access procedure initiated by a PDCCH order not implemented, FIXME!!!) - { - 0, 0, ((crc_scrambled == _p_rnti)?6:(((crc_scrambled == _si_rnti) || (crc_scrambled == _ra_rnti))?16:0)), - 0, 0,0,0,0 - } // 55 RESERVED_NR_DCI - }; - // NOTE 1: adjustments in freq_dom_resource_assignment_UL to be done if necessary - // NOTE 2: adjustments in padding to be done if necessary - uint8_t dci_size [8] = {0,0,0,0,0,0,0,0}; // will contain size for each format - - for (int i=0 ; i position in table is 2) - dci_fields_sizes[j][i] = dci_field_size_table[j][i]; // dci_fields_sizes[j] contains the sizes of each field (j) for a determined format i - //} - } - - LOG_DDD("(nr_dci_format_size) dci_size[%d]=%d for n_RB_ULBWP=%d\n", - i,dci_size[i],n_RB_ULBWP); - } - - LOG_DDD("(nr_dci_format_size) dci_fields_sizes[][] = { \n"); - -#ifdef NR_PDCCH_DCI_DEBUG - for (int j=0; j dci_size[2])) { - dci_field_size_table[SUL_IND_0_0][0] = 0; - dci_size[0]=dci_size[0]-1; - } - - // if ((format == format0_0) || (format == format1_0)) { - // According to Section 7.3.1.1.1 in TS 38.212 - // If DCI format 0_0 is monitored in common search space and if the number of information bits in the DCI format 0_0 prior to padding - // is less than the payload size of the DCI format 1_0 monitored in common search space for scheduling the same serving cell, - // zeros shall be appended to the DCI format 0_0 until the payload size equals that of the DCI format 1_0. - if (dci_size[0] < dci_size[2]) { // '0' corresponding to index for format0_0 and '2' corresponding to index of format1_0 - //if (format == format0_0) { - dci_fields_sizes[PADDING_NR_DCI][0] = dci_size[2] - dci_size[0]; - dci_size[0] = dci_size[2]; - LOG_DDD("(nr_dci_format_size) new dci_size[format0_0]=%d\n",dci_size[0]); - //} - } - - // If DCI format 0_0 is monitored in common search space and if the number of information bits in the DCI format 0_0 prior to padding - // is larger than the payload size of the DCI format 1_0 monitored in common search space for scheduling the same serving cell, - // the bitwidth of the frequency domain resource allocation field in the DCI format 0_0 is reduced - // such that the size of DCI format 0_0 equals to the size of the DCI format 1_0.. - if (dci_size[0] > dci_size[2]) { - //if (format == format0_0) { - dci_fields_sizes[FREQ_DOM_RESOURCE_ASSIGNMENT_UL][0] -= (dci_size[0] - dci_size[2]); - dci_size[0] = dci_size[2]; - LOG_DDD("(nr_dci_format_size) new dci_size[format0_0]=%d\n",dci_size[0]); - //} - } - - /* - * TS 38.212 subclause 7.3.1.1.2 - * For a UE configured with SUL in a cell: - * if PUSCH is configured to be transmitted on both the SUL and the non-SUL of the cell and - * if the number of information bits in format 0_1 for the SUL - * is not equal to the number of information bits in format 0_1 for the non-SUL, - * zeros shall be appended to smaller format 0_1 until the payload size equals that of the larger format 0_1 - * - * Not implemented. FIXME!!! - * - */ - // } - LOG_DDD("(nr_dci_format_size) dci_fields_sizes[][] = { \n"); - -#ifdef NR_PDCCH_DCI_DEBUG - for (int j=0; j