diff --git a/ci-scripts/Jenkinsfile-physim-deploy b/ci-scripts/Jenkinsfile-physim-deploy new file mode 100644 index 0000000000..d10754df2b --- /dev/null +++ b/ci-scripts/Jenkinsfile-physim-deploy @@ -0,0 +1,211 @@ +#!/bin/groovy +/* + * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more + * contributor license agreements. See the NOTICE file distributed with + * this work for additional information regarding copyright ownership. + * The OpenAirInterface Software Alliance licenses this file to You under + * the OAI Public License, Version 1.1 (the "License"); you may not use this file + * except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.openairinterface.org/?page_id=698 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + *------------------------------------------------------------------------------- + * For more information about the OpenAirInterface (OAI) Software Alliance: + * contact@openairinterface.org + */ + +// Location of the executor node +def pythonExecutor = params.pythonExecutor + +// Location of the test XML file to be run +def testXMLFile = params.pythonTestXmlFile +def mainPythonAllXmlFiles = "" +def buildStageStatus = true + +// Name of the test stage +def testStageName = params.pipelineTestStageName + +// Global Parameters. Normally they should be populated when the master job +// triggers the slave job with parameters +def eNB_Repository +def eNB_Branch +def eNB_CommitID +def eNB_AllowMergeRequestProcess = false +def eNB_TargetBranch + +// Flags +def scmEvent = false +def upstreamEvent = false + +//------------------------------------------------------------------------------- +// Pipeline start +pipeline { + agent { + label pythonExecutor + } + options { + disableConcurrentBuilds() + timestamps() + ansiColor('xterm') + //lock(cn_ci_resource) + } + + stages { + stage ('Verify Parameters') { + steps { + script { + echo '\u2705 \u001B[32mVerify Parameters\u001B[0m' + + JOB_TIMESTAMP = sh returnStdout: true, script: 'date --utc --rfc-3339=seconds | sed -e "s#+00:00##"' + JOB_TIMESTAMP = JOB_TIMESTAMP.trim() + + def allParametersPresent = true + + // It is already to late to check it + if (params.pythonExecutor != null) { + echo "eNB CI executor node : ${pythonExecutor}" + } + // If not present picking a default Stage Name + if (params.pipelineTestStageName == null) { + // picking default + testStageName = 'Template Test Stage' + } + + if (params.smartphonesResource == null) { + allParametersPresent = false + } + if (params.eNB_IPAddress == null) { + allParametersPresent = false + } + if (params.eNB_SourceCodePath == null) { + allParametersPresent = false + } + if (params.eNB_Credentials == null) { + allParametersPresent = false + } + // the following 4 parameters should be pushed by the master trigger + // if not present, take the job GIT variables (used for developing) + if (params.eNB_Repository == null) { + eNB_Repository = env.GIT_URL + } else { + eNB_Repository = params.eNB_Repository + } + echo "eNB_Repository : ${eNB_Repository}" + if (params.eNB_Branch == null) { + eNB_Branch = env.GIT_BRANCH + } else { + eNB_Branch = params.eNB_Branch + } + echo "eNB_Branch : ${eNB_Branch}" + if (params.eNB_CommitID == null) { + eNB_CommitID = env.GIT_COMMIT + } else { + eNB_CommitID = params.eNB_CommitID + } + echo "eNB_CommitID : ${eNB_CommitID}" + if (params.eNB_mergeRequest != null) { + eNB_AllowMergeRequestProcess = params.eNB_mergeRequest + if (eNB_AllowMergeRequestProcess) { + if (params.eNB_TargetBranch != null) { + eNB_TargetBranch = params.eNB_TargetBranch + } else { + eNB_TargetBranch = 'develop' + } + echo "eNB_TargetBranch : ${eNB_TargetBranch}" + } + } + + if (params.EPC_IPAddress == null) { + allParametersPresent = false + } + if (params.EPC_Type == null) { + allParametersPresent = false + } + if (params.EPC_SourceCodePath == null) { + allParametersPresent = false + } + if (params.EPC_Credentials == null) { + allParametersPresent = false + } + + if (params.ADB_IPAddress == null) { + allParametersPresent = false + } + if (params.ADB_Credentials == null) { + allParametersPresent = false + } + if (params.OC_Credentials == null) { + allParametersPresent = false + } + if (params.OC_Workspace == null) { + allParametersPresent = false + } + if (allParametersPresent) { + echo "All parameters are present" + if (eNB_AllowMergeRequestProcess) { + sh "git fetch" + sh "./ci-scripts/doGitLabMerge.sh --src-branch ${eNB_Branch} --src-commit ${eNB_CommitID} --target-branch ${eNB_TargetBranch} --target-commit latest" + } else { + sh "git fetch" + sh "git checkout -f ${eNB_CommitID}" + } + } else { + echo "Some parameters are missing" + sh "./ci-scripts/fail.sh" + } + } + } + } + + stage ("Deploy and Test") { + steps { + script { + dir ('ci-scripts') { + echo "\u2705 \u001B[32m${testStageName}\u001B[0m" + // If not present picking a default XML file + if (params.pythonTestXmlFile == null) { + // picking default + testXMLFile = 'xml_files/enb_usrpB210_band7_50PRB.xml' + echo "Test XML file(default): ${testXMLFile}" + mainPythonAllXmlFiles += "--XMLTestFile=" + testXMLFile + " " + } else { + String[] myXmlTestSuite = testXMLFile.split("\\r?\\n") + for (xmlFile in myXmlTestSuite) { + if (fileExists(xmlFile)) { + mainPythonAllXmlFiles += "--XMLTestFile=" + xmlFile + " " + echo "Test XML file : ${xmlFile}" + } + } + } + withCredentials([ + [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password'], + [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password'], + [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.ADB_Credentials}", usernameVariable: 'ADB_Username', passwordVariable: 'ADB_Password'], + [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.OC_Credentials}", usernameVariable: 'OC_Username', passwordVariable: 'OC_Password'] + ]) { + sh "python3 main.py --mode=InitiateHtml --ranRepository=${eNB_Repository} --ranBranch=${eNB_Branch} --ranCommitID=${eNB_CommitID} --ranAllowMerge=${eNB_AllowMergeRequestProcess} --ranTargetBranch=${eNB_TargetBranch} --ADBIPAddress=${params.ADB_IPAddress} --ADBUserName=${ADB_Username} --ADBPassword=${ADB_Password} ${mainPythonAllXmlFiles}" + String[] myXmlTestSuite = testXMLFile.split("\\r?\\n") + for (xmlFile in myXmlTestSuite) { + if (fileExists(xmlFile)) { + try { + sh "python3 main.py --mode=TesteNB --eNBIPAddress=${params.eNB_IPAddress} --ranRepository=${eNB_Repository} --ranBranch=${eNB_Branch} --ranCommitID=${eNB_CommitID} --ranAllowMerge=${eNB_AllowMergeRequestProcess} --ranTargetBranch=${eNB_TargetBranch} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath} --EPCIPAddress=${params.EPC_IPAddress} --EPCType=${params.EPC_Type} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCSourceCodePath=${params.EPC_SourceCodePath} --ADBIPAddress=${params.ADB_IPAddress} --ADBUserName=${ADB_Username} --ADBPassword=${ADB_Password} --XMLTestFile=${xmlFile} --OCUserName=${OC_Username} --OCPassword=${ADB_Password} --OCWorkspace=${OC_Workspace}" + } catch (Exception e) { + currentBuild.result = 'FAILURE' + buildStageStatus = false + } + } + } + sh "python3 main.py --mode=FinalizeHtml --finalStatus=${buildStageStatus} --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password}" + } + } + } + } + } + } +} \ No newline at end of file diff --git a/ci-scripts/args_parse.py b/ci-scripts/args_parse.py index 288e0b4885..23da36c98f 100644 --- a/ci-scripts/args_parse.py +++ b/ci-scripts/args_parse.py @@ -41,7 +41,7 @@ import constants as CONST #----------------------------------------------------------- -def ArgsParse(argvs,CiTestObj,RAN,HTML,EPC,ldpc,CONTAINERS,HELP,SCA): +def ArgsParse(argvs,CiTestObj,RAN,HTML,EPC,ldpc,CONTAINERS,HELP,SCA,PHYSIM): py_param_file_present = False @@ -81,6 +81,7 @@ def ArgsParse(argvs,CiTestObj,RAN,HTML,EPC,ldpc,CONTAINERS,HELP,SCA): ldpc.ranRepository=matchReg.group(1) CONTAINERS.ranRepository=matchReg.group(1) SCA.ranRepository=matchReg.group(1) + PHYSIM.ranRepository=matchReg.group(1) elif re.match('^\-\-eNB_AllowMerge=(.+)$|^\-\-ranAllowMerge=(.+)$', myArgv, re.IGNORECASE): if re.match('^\-\-eNB_AllowMerge=(.+)$', myArgv, re.IGNORECASE): matchReg = re.match('^\-\-eNB_AllowMerge=(.+)$', myArgv, re.IGNORECASE) @@ -94,6 +95,7 @@ def ArgsParse(argvs,CiTestObj,RAN,HTML,EPC,ldpc,CONTAINERS,HELP,SCA): HTML.ranAllowMerge=True CONTAINERS.ranAllowMerge=True SCA.ranAllowMerge=True + PHYSIM.ranAllowMerge=True elif re.match('^\-\-eNBBranch=(.+)$|^\-\-ranBranch=(.+)$', myArgv, re.IGNORECASE): if re.match('^\-\-eNBBranch=(.+)$', myArgv, re.IGNORECASE): matchReg = re.match('^\-\-eNBBranch=(.+)$', myArgv, re.IGNORECASE) @@ -105,6 +107,7 @@ def ArgsParse(argvs,CiTestObj,RAN,HTML,EPC,ldpc,CONTAINERS,HELP,SCA): ldpc.ranBranch=matchReg.group(1) CONTAINERS.ranBranch=matchReg.group(1) SCA.ranBranch=matchReg.group(1) + PHYSIM.ranBranch=matchReg.group(1) elif re.match('^\-\-eNBCommitID=(.*)$|^\-\-ranCommitID=(.*)$', myArgv, re.IGNORECASE): if re.match('^\-\-eNBCommitID=(.*)$', myArgv, re.IGNORECASE): matchReg = re.match('^\-\-eNBCommitID=(.*)$', myArgv, re.IGNORECASE) @@ -116,6 +119,7 @@ def ArgsParse(argvs,CiTestObj,RAN,HTML,EPC,ldpc,CONTAINERS,HELP,SCA): ldpc.ranCommitID=matchReg.group(1) CONTAINERS.ranCommitID=matchReg.group(1) SCA.ranCommitID=matchReg.group(1) + PHYSIM.ranCommitID=matchReg.group(1) elif re.match('^\-\-eNBTargetBranch=(.*)$|^\-\-ranTargetBranch=(.*)$', myArgv, re.IGNORECASE): if re.match('^\-\-eNBTargetBranch=(.*)$', myArgv, re.IGNORECASE): matchReg = re.match('^\-\-eNBTargetBranch=(.*)$', myArgv, re.IGNORECASE) @@ -127,6 +131,7 @@ def ArgsParse(argvs,CiTestObj,RAN,HTML,EPC,ldpc,CONTAINERS,HELP,SCA): ldpc.ranTargetBranch=matchReg.group(1) CONTAINERS.ranTargetBranch=matchReg.group(1) SCA.ranTargetBranch=matchReg.group(1) + PHYSIM.ranTargetBranch=matchReg.group(1) elif re.match('^\-\-eNBIPAddress=(.+)$|^\-\-eNB[1-2]IPAddress=(.+)$', myArgv, re.IGNORECASE): if re.match('^\-\-eNBIPAddress=(.+)$', myArgv, re.IGNORECASE): matchReg = re.match('^\-\-eNBIPAddress=(.+)$', myArgv, re.IGNORECASE) @@ -134,6 +139,7 @@ def ArgsParse(argvs,CiTestObj,RAN,HTML,EPC,ldpc,CONTAINERS,HELP,SCA): ldpc.eNBIpAddr=matchReg.group(1) CONTAINERS.eNBIPAddress=matchReg.group(1) SCA.eNBIPAddress=matchReg.group(1) + PHYSIM.eNBIPAddress=matchReg.group(1) elif re.match('^\-\-eNB1IPAddress=(.+)$', myArgv, re.IGNORECASE): matchReg = re.match('^\-\-eNB1IPAddress=(.+)$', myArgv, re.IGNORECASE) RAN.eNB1IPAddress=matchReg.group(1) @@ -149,6 +155,7 @@ def ArgsParse(argvs,CiTestObj,RAN,HTML,EPC,ldpc,CONTAINERS,HELP,SCA): ldpc.eNBUserName=matchReg.group(1) CONTAINERS.eNBUserName=matchReg.group(1) SCA.eNBUserName=matchReg.group(1) + PHYSIM.eNBUserName=matchReg.group(1) elif re.match('^\-\-eNB1UserName=(.+)$', myArgv, re.IGNORECASE): matchReg = re.match('^\-\-eNB1UserName=(.+)$', myArgv, re.IGNORECASE) RAN.eNB1UserName=matchReg.group(1) @@ -164,6 +171,7 @@ def ArgsParse(argvs,CiTestObj,RAN,HTML,EPC,ldpc,CONTAINERS,HELP,SCA): ldpc.eNBPassWord=matchReg.group(1) CONTAINERS.eNBPassword=matchReg.group(1) SCA.eNBPassword=matchReg.group(1) + PHYSIM.eNBPassword=matchReg.group(1) elif re.match('^\-\-eNB1Password=(.+)$', myArgv, re.IGNORECASE): matchReg = re.match('^\-\-eNB1Password=(.+)$', myArgv, re.IGNORECASE) RAN.eNB1Password=matchReg.group(1) @@ -179,6 +187,7 @@ def ArgsParse(argvs,CiTestObj,RAN,HTML,EPC,ldpc,CONTAINERS,HELP,SCA): ldpc.eNBSourceCodePath=matchReg.group(1) CONTAINERS.eNBSourceCodePath=matchReg.group(1) SCA.eNBSourceCodePath=matchReg.group(1) + PHYSIM.eNBSourceCodePath=matchReg.group(1) elif re.match('^\-\-eNB1SourceCodePath=(.+)$', myArgv, re.IGNORECASE): matchReg = re.match('^\-\-eNB1SourceCodePath=(.+)$', myArgv, re.IGNORECASE) RAN.eNB1SourceCodePath=matchReg.group(1) @@ -248,6 +257,15 @@ def ArgsParse(argvs,CiTestObj,RAN,HTML,EPC,ldpc,CONTAINERS,HELP,SCA): finalStatus = matchReg.group(1) if ((finalStatus == 'true') or (finalStatus == 'True')): CiTestObj.finalStatus = True + elif re.match('^\-\-OCUserName=(.+)$', myArgv, re.IGNORECASE): + matchReg = re.match('^\-\-OCUserName=(.+)$', myArgv, re.IGNORECASE) + PHYSIM.OCUserName = matchReg.group(1) + elif re.match('^\-\-OCPassword=(.+)$', myArgv, re.IGNORECASE): + matchReg = re.match('^\-\-OCPassword=(.+)$', myArgv, re.IGNORECASE) + PHYSIM.OCPassWord = matchReg.group(1) + elif re.match('^\-\-OCWorkspace=(.+)$', myArgv, re.IGNORECASE): + matchReg = re.match('^\-\-OCWorkspace=(.+)$', myArgv, re.IGNORECASE) + PHYSIM.OCWorkspace = matchReg.group(1) else: HELP.GenericHelp(CONST.Version) sys.exit('Invalid Parameter: ' + myArgv) diff --git a/ci-scripts/cls_physim1.py b/ci-scripts/cls_physim1.py new file mode 100644 index 0000000000..b4362492c9 --- /dev/null +++ b/ci-scripts/cls_physim1.py @@ -0,0 +1,196 @@ +#/* +# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more +# * contributor license agreements. See the NOTICE file distributed with +# * this work for additional information regarding copyright ownership. +# * The OpenAirInterface Software Alliance licenses this file to You under +# * the OAI Public License, Version 1.1 (the "License"); you may not use this file +# * except in compliance with the License. +# * You may obtain a copy of the License at +# * +# * http://www.openairinterface.org/?page_id=698 +# * +# * Unless required by applicable law or agreed to in writing, software +# * distributed under the License is distributed on an "AS IS" BASIS, +# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# * See the License for the specific language governing permissions and +# * limitations under the License. +# *------------------------------------------------------------------------------- +# * For more information about the OpenAirInterface (OAI) Software Alliance: +# * contact@openairinterface.org +# */ +#--------------------------------------------------------------------- +# Python for CI of OAI-eNB + COTS-UE +# +# Required Python Version +# Python 3.x +# +# Required Python Package +# pexpect +#--------------------------------------------------------------------- + +#----------------------------------------------------------- +# Import +#----------------------------------------------------------- +import logging +import sshconnection +import html +import os +import constants as CONST +import helpreadme as HELP + +class PhySim: + def __init__(self): + self.eNBIpAddr = "" + self.eNBUserName = "" + self.eNBPassword = "" + self.OCUserName = "" + self.OCPassword = "" + self.OCWorkspace = "" + self.eNBSourceCodePath = "" + self.ranRepository = "" + self.ranBranch = "" + self.ranCommitID= "" + self.ranAllowMerge= "" + self.ranTargetBranch= "" + self.exitStatus=0 + +#-----------------$ +#PUBLIC Methods$ +#-----------------$ + + def Deploy_PhySim(self, HTML): + if self.ranRepository == '' or self.ranBranch == '' or self.ranCommitID == '': + HELP.GenericHelp(CONST.Version) + sys.exit('Insufficient Parameter') + lIpAddr = self.eNBIPAddress + lUserName = self.eNBUserName + lPassWord = self.eNBPassword + lSourcePath = self.eNBSourceCodePath + + if lIpAddr == '' or lUserName == '' or lPassWord == '' or lSourcePath == '': + HELP.GenericHelp(CONST.Version) + sys.exit('Insufficient Parameter') + logging.debug('Building on server: ' + lIpAddr) + mySSH = SSH.SSHConnection() + mySSH.open(lIpAddr, lUserName, lPassWord) + + self.testCase_id = HTML.testCase_id + + # on RedHat/CentOS .git extension is mandatory + result = re.search('([a-zA-Z0-9\:\-\.\/])+\.git', self.ranRepository) + if result is not None: + full_ran_repo_name = self.ranRepository + else: + full_ran_repo_name = self.ranRepository + '.git' + mySSH.command('mkdir -p ' + lSourcePath, '\$', 5) + mySSH.command('cd ' + lSourcePath, '\$', 5) + mySSH.command('if [ ! -e .git ]; then stdbuf -o0 git clone ' + full_ran_repo_name + ' .; else stdbuf -o0 git fetch --prune; fi', '\$', 600) + # Raphael: here add a check if git clone or git fetch went smoothly + mySSH.command('git config user.email "jenkins@openairinterface.org"', '\$', 5) + mySSH.command('git config user.name "OAI Jenkins"', '\$', 5) + + mySSH.command('echo ' + lPassWord + ' | sudo -S git clean -x -d -ff', '\$', 30) + mySSH.command('mkdir -p cmake_targets/log', '\$', 5) + # if the commit ID is provided use it to point to it + if self.ranCommitID != '': + mySSH.command('git checkout -f ' + self.ranCommitID, '\$', 5) + + mySSH.command("sudo podman image inspect --format='Size = {{.Size}} bytes' oai-physim:ci-temp", '\$', 60) + if mySSH.getBefore().count('no such image') != 0: + logging.error('\u001B[1m No such image oai-physim\u001B[0m') + else: + result = re.search('Size *= *(?P[0-9\-]+) *bytes', mySSH.getBefore()) + if result is not None: + imageSize = float(result.group('size')) + imageSize = imageSize / 1000 + if imageSize < 1000: + logging.debug('\u001B[1m oai-physim size is ' + ('%.0f' % imageSize) + ' kbytes\u001B[0m') + else: + imageSize = imageSize / 1000 + if imageSize < 1000: + logging.debug('\u001B[1m oai-physim size is ' + ('%.0f' % imageSize) + ' Mbytes\u001B[0m') + else: + imageSize = imageSize / 1000 + logging.debug('\u001B[1m oai-physim is ' + ('%.3f' % imageSize) + ' Gbytes\u001B[0m') + else: + logging.debug('oai-physim size is unknown') + + # logging to OC cluster + mySSH.command('oc login -u {self.OCUserName} -p {self.OCPassword}', '\$', 6) + if mySSH.getBefore().count('Login successful') == 0: + logging.error('\u001B[1m OC Cluster Login Failed\u001B[0m') + else: + logging.debug('\u001B[1m Login to OC Cluster Successfully\u001B[0m') + mySSH.command('oc project {self.OCWorkspace}', '\$', 6) + if (mySSH.getBefore().count('Already on project "{self.OCWorkspace}"')) == 0 or (mySSH.getBefore().count('Now using project "{self.OCWorkspace}"')) == 0: + logging.error('\u001B[1m Unable to access OC project {self.OCWorkspace}\u001B[0m') + else: + logging.debug('\u001B[1m Now using project {self.OCWorkspace}\u001B[0m') + + # Using helm charts deployment + mySSH.command('helm install physim ./charts/physims/', '\$', 6) + if mySSH.getBefore().count('STATUS: deployed') == 0: + logging.error('\u001B[1m Deploying PhySim Failed using helm chart\u001B[0m') + else: + logging.debug('\u001B[1m Deployed PhySim Successfully using helm chart\u001B[0m') + isRunning = False + while(isRunning == False): + mySSH.command('oc get pods -l app.kubernetes.io/instance=physim', '\$', 6) + if mySSH.getBefore().count('Running') == 12 + logging.debug('\u001B[1m Running the physim test Scenarios\u001B[0m') + isRunning = True + podNames = re.findall('oai[\S\d\w]+', mySSH.getBefore()) + # Waiting to complete the running test + count = 0 + isFinished = False + while(count < 25 or isFinished == False): + time.sleep(60) + mySSH.command('oc get pods -l app.kubernetes.io/instance=physim', '\$', 6) + result = re.search('oai-nr-dlsim[\S\d\w]+', mySSH.getBefore()) + if result is not None: + podName1 = result.group() + mySSH.command('oc logs {podName1}', '\$', 6) + if mySSH.getBefore().count('Finished') != 0: + isFinished = True + count += 1 + if isFinished: + logging.debug('\u001B[1m PhySim test is Complete\u001B[0m') + + # Getting the logs of each executables running in individual pods + for podName in podNames: + mySSH.command('oc logs {podName} >> cmake_targets/log/physim_test.txt 2>&1', '\$', 6) + mySSH.command('cd ' + lSourcePath + '/cmake_targets', '\$', 5) + mySSH.command('mkdir -p physim_test_log_' + self.testCase_id, '\$', 5) + mySSH.command('mv log/* ' + 'physim_test_log_' + self.testCase_id, '\$', 5) + # UnDeploy the physical simulator pods + mySSH.command('helm uninstall physim', '\$', 10) + if mySSH.getBefore().count('release "physim" uninstalled') != 0 + logging.debug('\u001B[1m UnDeployed PhySim Successfully on OC Cluster\u001B[0m') + else: + logging.debug('\u001B[1m Failed to UnDeploy PhySim on OC Cluster\u001B[0m') + mySSH.close() + mySSH.copyin(lIpAddr, lUserName, lPassWord, lSourcePath + '/cmake_targets/physim_test_log_' + self.testCase_id + '/*', '.') + testResult = {} + testCount = 0 + if (os.path.isfile('./physim_test.txt')): + with open('./physim_test.txt', 'r') as logfile: + for line in logfile: + ret = re.search('execution', str(line)) + if ret is not None: + testCount += 1 + testName = line.split() + ret1 = re.search('Result = PASS', str(line)) + if ret1 is not None: + testResult[testName[1]] = 'PASS' + else: + testResult[testName[1]] = 'FAIL' + + HTML.CreateHtmlTestRow('N/A', 'OK', CONST.ALL_PROCESSES_OK) + HTML.CreateHtmlTestRowPhySimTestResult(testResult) + logging.info('\u001B[1m Physical Simulator Pass\u001B[0m') + + return 0 + + + + diff --git a/ci-scripts/html.py b/ci-scripts/html.py index a0ac638573..538906d5bf 100644 --- a/ci-scripts/html.py +++ b/ci-scripts/html.py @@ -562,5 +562,22 @@ class HTMLManagement(): self.htmlFile.write(' ' + str(CCR.nbWrongScanfArg[vId]) + '\n') self.htmlFile.write(' \n') vId += 1 + + def CreateHtmlTestRowPhySimTestResult(self, testResult): + if (self.htmlFooterCreated or (not self.htmlHeaderCreated)): + return + self.htmlFile = open('test_results.html', 'a') + # Tab header + self.htmlFile.write(' \n') + self.htmlFile.write(' Test Description\n') + self.htmlFile.write(' Result\n') + self.htmlFile.write(' \n') + for key, value in testResult.items(): + self.htmlFile.write(' \n') + self.htmlFile.write(' ' + key + ' \n') + if value == 'PASS': + self.htmlFile.write(' ' + value + '\n') + else: + self.htmlFile.write(' ' + value + '\n') - self.htmlFile.close() + self.htmlFile.close() \ No newline at end of file diff --git a/ci-scripts/main.py b/ci-scripts/main.py index f13df9beb5..da2eda446f 100644 --- a/ci-scripts/main.py +++ b/ci-scripts/main.py @@ -43,7 +43,7 @@ import cls_physim #class PhySim for physical simulators build and import cls_cots_ue #class CotsUe for Airplane mode control import cls_containerize #class Containerize for all container-based operations on RAN/UE objects import cls_static_code_analysis #class for static code analysis - +import cls_physim1 #class PhySim for physical simulators deploy and run import sshconnection import epc @@ -380,6 +380,7 @@ RAN = ran.RANManagement() HTML = html.HTMLManagement() CONTAINERS = cls_containerize.Containerize() SCA = cls_static_code_analysis.StaticCodeAnalysis() +PHYSIM = cls_physim1.PhySim() ldpc=cls_physim.PhySim() #create an instance for LDPC test using GPU or CPU build @@ -745,6 +746,8 @@ elif re.match('^TesteNB$', mode, re.IGNORECASE) or re.match('^TestUE$', mode, re CONTAINERS.UndeployObject(HTML, RAN) elif action == 'Cppcheck_Analysis': SCA.CppCheckAnalysis(HTML) + elif action == 'Deploy_Run_PhySim': + PHYSIM.Deploy_PhySim(HTML) else: sys.exit('Invalid class (action) from xml') if not RAN.prematureExit: diff --git a/ci-scripts/xml_class_list.yml b/ci-scripts/xml_class_list.yml index de16116124..2282e101e5 100755 --- a/ci-scripts/xml_class_list.yml +++ b/ci-scripts/xml_class_list.yml @@ -38,3 +38,4 @@ - Deploy_Object - Undeploy_Object - Cppcheck_Analysis + - Deploy_Run_PhySim \ No newline at end of file diff --git a/ci-scripts/xml_files/physim_deploy_run.xml b/ci-scripts/xml_files/physim_deploy_run.xml new file mode 100644 index 0000000000..dc87193108 --- /dev/null +++ b/ci-scripts/xml_files/physim_deploy_run.xml @@ -0,0 +1,37 @@ + + + build-tab + Physical Simulators Check + wrench + + 000001 + + + + + Deploy_Run_PhySim + Deploy and run physical simulator on openshift + + + \ No newline at end of file