maki/openairinterface5g
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Merge remote-tracking branch 'origin/support-15-kHz-SCS' into integration_2022_wk21b

Browse Source
This commit is contained in:
Robert Schmidt
2022-05-27 10:05:57 +02:00
parent 72d0a4ff05 e639e79220
commit 21a820b061
25 changed files with 936 additions and 1531 deletions
Download Patch File Download Diff File Expand all files Collapse all files
openair1/SIMULATION/NR_PHY/dlsim.c
+12 -5
View File
@@ -96,7 +96,6 @@ uint16_t sl_ahead=0;
uint64_t downlink_frequency[MAX_NUM_CCs][4];
THREAD_STRUCT thread_struct;
nfapi_ue_release_request_body_t release_rntis;
uint32_t N_RB_DL = 106;
//Fixme: Uniq dirty DU instance, by global var, datamodel need better management
instance_t DUuniqInstance=0;
instance_t CUuniqInstance=0;
@@ -658,7 +657,7 @@ int main(int argc, char **argv)
default:
case 'h':
printf("%s -h(elp) -p(extended_prefix) -N cell_id -f output_filename -F input_filename -g channel_model -n n_frames -t Delayspread -s snr0 -S snr1 -x transmission_mode -y TXant -z RXant -i Intefrence0 -j Interference1 -A interpolation_file -C(alibration offset dB) -N CellId\n",
printf("%s -h(elp) -p(extended_prefix) -N cell_id -f output_filename -F input_filename -g channel_model -n n_frames -s snr0 -S snr1 -x transmission_mode -y TXant -z RXant -i Intefrence0 -j Interference1 -A interpolation_file -C(alibration offset dB) -N CellId\n",
argv[0]);
printf("-h This message\n");
printf("-L <log level, 0(errors), 1(warning), 2(analysis), 3(info), 4(debug), 5(trace)>\n");
@@ -667,7 +666,7 @@ int main(int argc, char **argv)
printf("-n Number of frames to simulate\n");
printf("-s Starting SNR, runs from SNR0 to SNR0 + 5 dB. If n_frames is 1 then just SNR is simulated\n");
printf("-S Ending SNR, runs from SNR0 to SNR1\n");
printf("-t Delay spread for multipath channel\n");
//printf("-t Delay spread for multipath channel\n");
printf("-g [A,B,C,D,E,F,G,R] Use 3GPP SCM (A,B,C,D) or 36-101 (E-EPA,F-EVA,G-ETU) models or R for MIMO model (ignores delay spread and Ricean factor)\n");
printf("-y Number of TX antennas used in gNB\n");
printf("-z Number of RX antennas used in UE\n");
@@ -853,10 +852,14 @@ int main(int argc, char **argv)
double fs,bw;
if (mu == 1 && N_RB_DL == 217) {
if (mu == 0 && N_RB_DL == 25) {
fs = 7.68e6;
bw = 5e6;
}
else if (mu == 1 && N_RB_DL == 217) {
fs = 122.88e6;
bw = 80e6;
}
}
else if (mu == 1 && N_RB_DL == 245) {
fs = 122.88e6;
bw = 90e6;
@@ -877,6 +880,10 @@ int main(int argc, char **argv)
fs = 61.44e6;
bw = 60e6;
}
else if (mu == 1 && N_RB_DL == 24) {
fs = 15.36e6;
bw = 10e6;
}
else if (mu == 3 && N_RB_DL == 66) {
fs = 122.88e6;
bw = 100e6;
openair1/SIMULATION/NR_PHY/prachsim.c
+12 -13
View File
@@ -240,7 +240,7 @@ int main(int argc, char **argv){
int i, l, aa, aarx, **txdata, trial, n_frames = 1, prach_start, rx_prach_start; //, ntrials=1;
int N_RB_UL = 106, delay = 0, NCS_config = 13, rootSequenceIndex = 1, threequarter_fs = 0, mu = 1, fd_occasion = 0, loglvl = OAILOG_INFO, numRA = 0, prachStartSymbol = 0;
uint8_t snr1set = 0, ue_speed1set = 0, transmission_mode = 1, n_tx = 1, n_rx = 1, awgn_flag = 0, msg1_frequencystart = 0, num_prach_fd_occasions = 1, prach_format=0;
uint8_t frame = 1, slot=19, slot_gNB=19, config_index = 98, prach_sequence_length = 1, restrictedSetConfig = 0, N_dur, N_t_slot, start_symbol;
uint8_t config_index = 98, prach_sequence_length = 1, restrictedSetConfig = 0, N_dur, N_t_slot, start_symbol;
uint16_t Nid_cell = 0, preamble_tx = 0, preamble_delay, format, format0, format1;
uint32_t tx_lev = 10000, prach_errors = 0; //,tx_lev_dB;
uint64_t SSB_positions = 0x01;
@@ -536,7 +536,7 @@ int main(int argc, char **argv){
frame_parms->N_RB_UL = N_RB_UL;
frame_parms->threequarter_fs = threequarter_fs;
frame_parms->frame_type = TDD;
frame_parms->freq_range = (mu==1 ? nr_FR1 : nr_FR2);
frame_parms->freq_range = (mu != 3 ? nr_FR1 : nr_FR2);
frame_parms->numerology_index = mu;
nr_phy_config_request_sim(gNB, N_RB_UL, N_RB_UL, mu, Nid_cell, SSB_positions);
@@ -546,9 +546,11 @@ int main(int argc, char **argv){
frame_parms->numerology_index,
frame_parms->N_RB_UL*(180e3)*(1 << frame_parms->numerology_index));
uint8_t subframe = slot/frame_parms->slots_per_subframe;
uint8_t frame = 1;
uint8_t subframe = 9;
uint8_t slot = 10 * frame_parms->slots_per_subframe - 1;
if (config_index<67 && mu==1) { prach_sequence_length=0; slot = subframe*2; slot_gNB = 1+(subframe*2); }
if (config_index<67 && mu != 3) { prach_sequence_length=0; slot = subframe * frame_parms->slots_per_subframe; }
uint16_t N_ZC = prach_sequence_length == 0 ? 839 : 139;
printf("Config_index %d, prach_sequence_length %d\n",config_index,prach_sequence_length);
@@ -569,9 +571,11 @@ int main(int argc, char **argv){
ru->gNB_list[0] = gNB;
gNB->gNB_config.carrier_config.num_tx_ant.value = 1;
gNB->gNB_config.carrier_config.num_rx_ant.value = 1;
if (mu==1)
if (mu == 0)
gNB->gNB_config.tdd_table.tdd_period.value = 7;
else if (mu == 1)
gNB->gNB_config.tdd_table.tdd_period.value = 6;
else if (mu==3)
else if (mu == 3)
gNB->gNB_config.tdd_table.tdd_period.value = 3;
else {
printf("unsupported numerology %d\n",mu);
@@ -585,7 +589,7 @@ int main(int argc, char **argv){
int ret = get_nr_prach_info_from_index(config_index,
(int)frame,
(int)slot_gNB,
(int)slot,
absoluteFrequencyPointA,
mu,
frame_parms->frame_type,
@@ -717,12 +721,7 @@ int main(int argc, char **argv){
bw = N_RB_UL*(180e3)*(1 << frame_parms->numerology_index);
AssertFatal(bw<=122.88e6,"Illegal channel bandwidth %f (mu %d,N_RB_UL %d)\n", bw, frame_parms->numerology_index, N_RB_UL);
if (bw <= 30.72e6)
fs = 30.72e6;
else if (bw <= 61.44e6)
fs = 61.44e6;
else if (bw <= 122.88e6)
fs = 122.88e6;
fs = frame_parms->samples_per_subframe * 1e3;
LOG_I(PHY,"Running with bandwidth %f Hz, fs %f samp/s, FRAME_LENGTH_COMPLEX_SAMPLES %d\n",bw,fs,FRAME_LENGTH_COMPLEX_SAMPLES);
openair1/SIMULATION/NR_PHY/ulsim.c
+44 -21
View File
@@ -91,7 +91,6 @@ double cpuf;
uint64_t downlink_frequency[MAX_NUM_CCs][4];
THREAD_STRUCT thread_struct;
nfapi_ue_release_request_body_t release_rntis;
uint32_t N_RB_DL = 106;
//Fixme: Uniq dirty DU instance, by global var, datamodel need better management
instance_t DUuniqInstance=0;
@@ -306,7 +305,6 @@ int main(int argc, char **argv)
int32_t txlev_sum = 0, atxlev[4];
int start_rb = 0;
int UE_id =0; // [hna] only works for UE_id = 0 because NUMBER_OF_NR_UE_MAX is set to 1 (phy_init_nr_gNB causes segmentation fault)
float target_error_rate = 0.01;
int print_perf = 0;
cpuf = get_cpu_freq_GHz();
int msg3_flag = 0;
@@ -314,7 +312,7 @@ int main(int argc, char **argv)
float roundStats[100];
double effRate[100];
double effTP[100];
//float eff_tp_check = 0.7;
float eff_tp_check = 0.7;
uint8_t snrRun;
int prb_inter = 0;
@@ -322,8 +320,8 @@ int main(int argc, char **argv)
int modify_dmrs = 0;
/* L_PTRS = ptrs_arg[0], K_PTRS = ptrs_arg[1] */
int ptrs_arg[2] = {-1,-1};// Invalid values
/* DMRS TYPE = dmrs_arg[0], Add Pos = dmrs_arg[1] */
int dmrs_arg[2] = {-1,-1};// Invalid values
/* mapping type = dmrs_arg[0], Add Pos = dmrs_arg[1], dmrs config type = dmrs_arg[2] */
int dmrs_arg[3] = {-1,-1,-1};// Invalid values
uint16_t ptrsSymPos = 0;
uint16_t ptrsSymbPerSlot = 0;
uint16_t ptrsRePerSymb = 0;
@@ -350,7 +348,7 @@ int main(int argc, char **argv)
/* initialize the sin-cos table */
InitSinLUT();
while ((c = getopt(argc, argv, "a:b:c:d:ef:g:h:i:kl:m:n:p:r:s:u:w:y:z:F:G:H:M:N:PR:S:T:U:L:Z:W:")) != -1) {
while ((c = getopt(argc, argv, "a:b:c:d:ef:g:h:ikl:m:n:p:r:s:t:u:w:y:z:F:G:H:M:N:PR:S:T:U:L:Z:W:")) != -1) {
printf("handling optarg %c\n",c);
switch (c) {
@@ -488,11 +486,10 @@ int main(int argc, char **argv)
start_rb = atoi(optarg);
break;
/*
case 't':
eff_tp_check = (float)atoi(optarg)/100;
break;
*/
/*
case 'r':
ricean_factor = pow(10,-.1*atof(optarg));
@@ -594,7 +591,7 @@ int main(int argc, char **argv)
default:
case 'h':
printf("%s -h(elp) -p(extended_prefix) -N cell_id -f output_filename -F input_filename -g channel_model -n n_frames -t Delayspread -s snr0 -S snr1 -x transmission_mode -y TXant -z RXant -i Intefrence0 -j Interference1 -A interpolation_file -C(alibration offset dB) -N CellId -Z Enable SC-FDMA in Uplink \n", argv[0]);
printf("%s -h(elp) -p(extended_prefix) -N cell_id -f output_filename -F input_filename -g channel_model -n n_frames -s snr0 -S snr1 -x transmission_mode -y TXant -z RXant -i Intefrence0 -j Interference1 -A interpolation_file -C(alibration offset dB) -N CellId -Z Enable SC-FDMA in Uplink \n", argv[0]);
//printf("-d Use TDD\n");
printf("-d Introduce delay in terms of number of samples\n");
printf("-f Number of frames to simulate\n");
@@ -606,7 +603,7 @@ int main(int argc, char **argv)
printf("-m MCS value\n");
printf("-n Number of trials to simulate\n");
printf("-p Use extended prefix mode\n");
printf("-t Delay spread for multipath channel\n");
//printf("-t Delay spread for multipath channel\n");
printf("-u Set the numerology\n");
printf("-w Start PRB for PUSCH\n");
//printf("-x Transmission mode (1,2,6 for the moment)\n");
@@ -649,16 +646,37 @@ int main(int argc, char **argv)
double sampling_frequency;
double bandwidth;
if (N_RB_UL >= 217) sampling_frequency = 122.88;
else if (N_RB_UL >= 106) sampling_frequency = 61.44;
else if (N_RB_UL >= 32) sampling_frequency = 32.72;
else { printf("Need at least 106 PRBs\b"); exit(-1); }
if (N_RB_UL == 273) bandwidth = 100;
else if (N_RB_UL == 217) bandwidth = 80;
else if (N_RB_UL == 106) bandwidth = 40;
else if (N_RB_UL == 32) bandwidth = 50;
else { printf("Add N_RB_UL %d\n",N_RB_UL); exit(-1); }
if (mu == 0 && N_RB_UL == 25 ) {
sampling_frequency = 7.68;
bandwidth = 5;
}
else if (mu == 1 && N_RB_UL == 273) {
sampling_frequency = 122.88;
bandwidth = 100;
}
else if (mu == 1 && N_RB_UL == 217) {
sampling_frequency = 122.88;
bandwidth = 80;
}
else if (mu == 1 && N_RB_UL == 106) {
sampling_frequency = 61.44;
bandwidth = 40;
}
else if (mu == 1 && N_RB_UL == 24) {
sampling_frequency = 15.36;
bandwidth = 10;
}
else if (mu == 3 && N_RB_UL == 32) {
sampling_frequency = 61.44;
bandwidth = 50;
}
else {
printf("Add N_RB_UL %d\n",N_RB_UL);
exit(-1);
}
LOG_I( PHY,"++++++++++++++++++++++++++++++++++++++++++++++%i+++++++++++++++++++++++++++++++++++++++++",loglvl);
if (openair0_cfg[0].threequarter_fs == 1) sampling_frequency*=.75;
UE2gNB = new_channel_desc_scm(n_tx, n_rx, channel_model,
@@ -872,8 +890,12 @@ int main(int argc, char **argv)
/* Additional DMRS positions */
if(dmrs_arg[1] >= 0 && dmrs_arg[1] <=3 )
add_pos = dmrs_arg[1];
/* DMRS Conf Type 1 or 2 */
if(dmrs_arg[2] == 1)
dmrs_config_type = pusch_dmrs_type1;
else if(dmrs_arg[2] == 2)
dmrs_config_type = pusch_dmrs_type2;
}
printf("NOTE: DMRS config is modified with Mapping Type %d , Additional Position %d \n", mapping_type, add_pos );
uint8_t length_dmrs = pusch_len1;
uint16_t l_prime_mask = get_l_prime(nb_symb_sch, mapping_type, add_pos, length_dmrs, start_symbol, NR_MIB__dmrs_TypeA_Position_pos2);
@@ -892,6 +914,7 @@ int main(int argc, char **argv)
AssertFatal(index >= 0, "Num RBs not configured according to 3GPP 38.211 section 6.3.1.4. For PUSCH with transform precoding, num RBs cannot be multiple of any other primenumber other than 2,3,5\n");
dmrs_config_type = pusch_dmrs_type1;
nb_re_dmrs = 6;
printf("[ULSIM]: TRANSFORM PRECODING ENABLED. Num RBs: %d, index for DMRS_SEQ: %d\n", nb_rb, index);
}
@@ -1560,7 +1583,7 @@ int main(int argc, char **argv)
if(n_trials==1)
break;
if ((float)n_errors[0][snrRun]/(float)n_trials <= target_error_rate) {
if (effRate[snrRun] > (eff_tp_check*TBS)) {
printf("*************\n");
printf("PUSCH test OK\n");
printf("*************\n");