Build RHEL9 images on Openshift Cluster

- update of existing Dockerfiles for building RHEL8 images to RHEL9
2023-06-05 17:49:06 +02:00
parent c81ed57a93
commit 296bddb904
22 changed files with 131 additions and 129 deletions
@@ -0,0 +1,118 @@
+#/*
+# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+# * contributor license agreements.  See the NOTICE file distributed with
+# * this work for additional information regarding copyright ownership.
+# * The OpenAirInterface Software Alliance licenses this file to You under
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+# * except in compliance with the License.
+# * You may obtain a copy of the License at
+# *
+# *      http://www.openairinterface.org/?page_id=698
+# *
+# * Unless required by applicable law or agreed to in writing, software
+# * distributed under the License is distributed on an "AS IS" BASIS,
+# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# * See the License for the specific language governing permissions and
+# * limitations under the License.
+# *-------------------------------------------------------------------------------
+# * For more information about the OpenAirInterface (OAI) Software Alliance:
+# *      contact@openairinterface.org
+# */
+#---------------------------------------------------------------------
+#
+# Dockerfile for the Open-Air-Interface BUILD service
+#   Valid for RHEL9
+#
+#---------------------------------------------------------------------
+
+FROM ran-base:latest AS phy-sim-build
+
+RUN rm -Rf /oai-ran
+WORKDIR /oai-ran
+COPY . .
+
+#only install address and undefined behavior sanitizer for this container, the others don't need it
+RUN yum install -y libasan libubsan
+
+#run build_oai to build the target image
+RUN /bin/sh oaienv && \ 
+    cd cmake_targets && \
+    mkdir -p log && \
+    ./build_oai --phy_simulators --ninja --verbose-ci --sanitize --noavx512 -c --cmake-opt -DCMAKE_C_FLAGS=-Werror --cmake-opt -DCMAKE_CXX_FLAGS=-Werror --cmake-opt -DCMAKE_C_FLAGS=-Wno-unused-function --cmake-opt -DCMAKE_CXX_FLAGS=-Wno-unused-function
+
+#start from scratch for target executable
+FROM registry.access.redhat.com/ubi9/ubi:latest as oai-physim
+
+RUN yum update -y && \
+    yum install -y --enablerepo="ubi-9-codeready-builder" \
+        lksctp-tools \
+        tzdata \
+        atlas \
+        hostname \
+        sudo \
+        procps-ng \
+        net-tools \
+        iputils \
+        bc \
+        iproute && \
+    echo "/usr/local/lib" > /etc/ld.so.conf.d/local-lib.conf && \
+    echo "/usr/local/lib64" >> /etc/ld.so.conf.d/local-lib.conf
+
+WORKDIR /opt/oai-physim/bin
+COPY --from=phy-sim-build \
+    /oai-ran/cmake_targets/ran_build/build/dlsim \
+    /oai-ran/cmake_targets/ran_build/build/nr_dlsim \
+    /oai-ran/cmake_targets/ran_build/build/nr_prachsim \
+    /oai-ran/cmake_targets/ran_build/build/nr_ulschsim \
+    /oai-ran/cmake_targets/ran_build/build/polartest \
+    /oai-ran/cmake_targets/ran_build/build/ulsim \
+    /oai-ran/cmake_targets/ran_build/build/ldpctest \
+    /oai-ran/cmake_targets/ran_build/build/nr_dlschsim \
+    /oai-ran/cmake_targets/ran_build/build/nr_pbchsim \
+    /oai-ran/cmake_targets/ran_build/build/nr_pucchsim \
+    /oai-ran/cmake_targets/ran_build/build/nr_ulsim \
+    /oai-ran/cmake_targets/ran_build/build/smallblocktest \
+    ./
+
+COPY --from=phy-sim-build \
+    /oai-ran/cmake_targets/ran_build/build/libcoding.so \
+    /lib64/liblapacke.so.3 \
+    /lib64/libX11.so.6 \
+    /lib64/libXpm.so.4 \
+    /lib64/libxcb.so.1 \
+    /lib64/libXau.so.6 \
+    /lib64/libforms.so.2 \
+    /lib64/libblas.so.3 \
+    /lib64/liblapack.so.3 \
+    /lib64/libexslt.so.0 \
+    /lib64/libxslt.so.1 \
+    /usr/lib64/libasan.so.6 \
+    /usr/lib64/libubsan.so.1 \
+    /oai-ran/cmake_targets/ran_build/build/libdfts.so \
+    /oai-ran/cmake_targets/ran_build/build/libldpc.so \
+    /oai-ran/cmake_targets/ran_build/build/libldpc_orig.so \
+    /usr/local/lib/
+
+RUN ldconfig
+
+# Copy some executables
+WORKDIR /usr/bin/
+
+COPY --from=phy-sim-build \
+    /usr/bin/killall \
+    /usr/bin/xmlstarlet \
+    ./
+
+# Copy the relevant configuration files for phySim
+WORKDIR /opt/oai-physim/
+
+COPY --from=phy-sim-build \
+    /oai-ran/cmake_targets/autotests/run_exec_autotests.bash \
+    /oai-ran/cmake_targets/autotests/test_case_list.xml \
+    /opt/oai-physim/cmake_targets/autotests/
+COPY --from=phy-sim-build \
+    /oai-ran/cmake_targets/tools/build_helper \
+    /oai-ran/cmake_targets/tools/test_helper \
+    /opt/oai-physim/cmake_targets/tools/
+
+#CMD ["sleep", "infinity"]