maki/openairinterface5g
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

merge develop

Browse Source
This commit is contained in:
Laurent Thomas
2021-04-09 12:39:33 +02:00
parent abfa103247 f0a1d0c23f
commit 307098da4a
316 changed files with 32104 additions and 13020 deletions
Download Patch File Download Diff File Expand all files Collapse all files
doc/RUNMODEM.md
+10 -7
View File
@@ -132,9 +132,9 @@ With the RF simulator (on the same machine):
`sudo RFSIMULATOR=127.0.0.1 ./nr-uesoftmodem --do-ra --rfsim --parallel-config PARALLEL_SINGLE_THREAD`
## sa setup with OAI
## SA setup with OAI
The sa flag is used to run gNB in standalone mode. Currently OAI in NR standalone mode transmits and receives SIB1.
The sa flag is used to run gNB in standalone mode. Currently OAI in NR standalone mode transmits and receives SIB1 and triggers the RA procedure for initial access.
In order to run gNB in standalone mode, the following flag is needed at gNB:
@@ -147,8 +147,9 @@ At the gNB the --sa flag does the following
- it encodes the RRCConfiguration and the RBconfig message and stores them in the binary files rbconfig.raw and reconfig.raw
- the RRC encodes SIB1 according the configuration file and transmits it through PDSCH
At the UE the --sa flag will
- read the binary files rbconfig.raw and reconfig.raw from the current directory (a different directory can be specified with the flag --rrc_config_path) and process them.
At the UE the --sa flag will:
- Read the binary files rbconfig.raw and reconfig.raw from the current directory (a different directory can be specified with the flag --rrc_config_path) and process them
- After the successful decoding of a SIB1 at RRC, the UE will start the 5G NR Initial Access Procedure by triggering the RA procedure.
From the `cmake_targets/ran_build/build` folder:
@@ -168,7 +169,7 @@ With the RF simulator (on the same machine):
## IF setup with OAI
The -C and -CO flags can be used together at UE side to set custom downlink and uplink FR1 intermediate frequencies for the IF equipment.
The -C and --CO flags can be used together at UE side to set custom downlink and uplink FR1 arbitrary frequencies for the IF equipment.
In order to run this setup, the following flags are needed at the UE side:
@@ -182,9 +183,11 @@ and the following parameters must be configured in the RUs section of the gNB co
`if_offset`
### Run OAI with custom DL/UL intermediate frequencies
The values must be given in Hz.
The following example uses DL frequency 2169.080 MHz and UL frequency offset -400 MHz, with a configuration file for band 66 at gNB side.
### Run OAI with custom DL/UL arbitrary frequencies
The following example uses DL frequency 2169.080 MHz and UL frequency offset -400 MHz, with a configuration file for band 66 (FDD) at gNB side.
From the `cmake_targets/ran_build/build` folder:
doc/TESTING_GNB_W_COTS_UE.md
+12 -2
View File
@@ -30,8 +30,6 @@ http://www.saelig.com/MFR00066/ste2300.htm
## Configuration Overview
* Non Standalone (NSA) configuration : initial Control Plane established between UE and RAN eNB, then User Plane established between UE and gNB, Core network is 4G based supporting rel 15
* Commercial UE: Oppo Reno 5G
* OAI Software Defined gNB and eNB
* eNB RF front end: USRP (ETTUS) B200 Mini or B210
* gNB RF front end: USRP (ETTUS) B200 Mini or B210 (N310 will be needed for MIMO and wider BW's)
@@ -40,6 +38,18 @@ http://www.saelig.com/MFR00066/ste2300.htm
* BW: 40MHz
* Antenna scheme: SISO
## COTS UEs
Our code might not work with all 5G phones yet, but we are constantly improving it. Here is a list of COTS UEs that we know that work with OAI.
* Oppo Reno 5G
* Samsung A90 5G
* Google Pixel 5G (note1)
* Simcom SIMCOM8200EA
* Quectel RM500Q-GL
Note1: In the version we have at Eurecom, you need to set the PLMN to 50501, and you also need to change the firmware to "11.0.0 (RD1A.201105.003.B1, Nov 2020, EU carriers)" (see https://developers.google.com/android/images)
## Repository
https://gitlab.eurecom.fr/oai/openairinterface5g/tree/develop