Integration of configuration module. Temporarily keep the legacy mode.
lte-softmodem -O <config file> will trigger legacy config mode ltesoftmodem -O libconfig:<config file> will trigger configuration module usage.
This commit is contained in:
Francois TABURET
+133
-11
@@ -30,7 +30,7 @@
|
||||
* \warning
|
||||
*/
|
||||
|
||||
#include "lte-softmodem.h"
|
||||
|
||||
|
||||
#include "T.h"
|
||||
|
||||
@@ -46,6 +46,7 @@
|
||||
|
||||
#include "PHY/defs.h"
|
||||
#include "common/ran_context.h"
|
||||
#include "common/config/config_userapi.h"
|
||||
|
||||
#undef MALLOC //there are two conflicting definitions, so we better make sure we don't use it at all
|
||||
//#undef FRAME_LENGTH_COMPLEX_SAMPLES //there are two conflicting definitions, so we better make sure we don't use it at all
|
||||
@@ -95,7 +96,7 @@ unsigned short config_frames[4] = {2,9,11,13};
|
||||
#include "PHY/TOOLS/lte_phy_scope.h"
|
||||
#include "stats.h"
|
||||
#endif
|
||||
|
||||
#include "lte-softmodem.h"
|
||||
|
||||
|
||||
#ifdef XFORMS
|
||||
@@ -623,14 +624,125 @@ void *l2l1_task(void *arg) {
|
||||
}
|
||||
#endif
|
||||
|
||||
static void get_options(void) {
|
||||
int CC_id;
|
||||
int clock_src;
|
||||
int tddflag;
|
||||
char *loopfile=NULL;
|
||||
int dumpframe;
|
||||
paramdef_t cmdline_params[] =CMDLINE_PARAMS_DESC ;
|
||||
|
||||
config_process_cmdline( cmdline_params,sizeof(cmdline_params)/sizeof(paramdef_t),NULL);
|
||||
if (tddflag > 0) {
|
||||
for (CC_id=0; CC_id<MAX_NUM_CCs; CC_id++)
|
||||
frame_parms[CC_id]->frame_type = TDD;
|
||||
}
|
||||
|
||||
if (strlen(in_path) > 0) {
|
||||
opt_type = OPT_PCAP;
|
||||
opt_enabled=1;
|
||||
printf("Enabling OPT for PCAP with the following file %s \n",in_path);
|
||||
}
|
||||
if (strlen(in_ip) > 0) {
|
||||
opt_enabled=1;
|
||||
opt_type = OPT_WIRESHARK;
|
||||
printf("Enabling OPT for wireshark for local interface");
|
||||
}
|
||||
if (UE_flag > 0) {
|
||||
paramdef_t cmdline_uemodeparams[] =CMDLINE_UEMODEPARAMS_DESC;
|
||||
paramdef_t cmdline_ueparams[] =CMDLINE_UEPARAMS_DESC;
|
||||
config_process_cmdline( cmdline_uemodeparams,sizeof(cmdline_uemodeparams)/sizeof(paramdef_t),NULL);
|
||||
config_process_cmdline( cmdline_ueparams,sizeof(cmdline_ueparams)/sizeof(paramdef_t),NULL);
|
||||
if (loopfile != NULL) {
|
||||
printf("Input file for hardware emulation: %s",loopfile);
|
||||
mode=loop_through_memory;
|
||||
input_fd = fopen(loopfile,"r");
|
||||
AssertFatal(input_fd != NULL,"Please provide a valid input file\n");
|
||||
}
|
||||
if ( (cmdline_uemodeparams[CMDLINE_CALIBUERX_IDX].paramflags & PARAMFLAG_PARAMSET) != 0) mode = rx_calib_ue;
|
||||
if ( (cmdline_uemodeparams[CMDLINE_CALIBUERXMED_IDX].paramflags & PARAMFLAG_PARAMSET) != 0) mode = rx_calib_ue_med;
|
||||
if ( (cmdline_uemodeparams[CMDLINE_CALIBUERXBYP_IDX].paramflags & PARAMFLAG_PARAMSET) != 0) mode = rx_calib_ue_byp;
|
||||
if ( *(cmdline_uemodeparams[CMDLINE_DEBUGUEPRACH_IDX].uptr) > 0) mode = debug_prach;
|
||||
if ( *(cmdline_uemodeparams[CMDLINE_NOL2CONNECT_IDX].uptr) > 0) mode = no_L2_connect;
|
||||
if ( *(cmdline_uemodeparams[CMDLINE_CALIBPRACHTX_IDX].uptr) > 0) mode = calib_prach_tx;
|
||||
if (dumpframe > 0) mode = rx_dump_frame;
|
||||
|
||||
if ( downlink_frequency[0][0] > 0) {
|
||||
for (CC_id=1; CC_id<MAX_NUM_CCs; CC_id++) {
|
||||
downlink_frequency[CC_id][1] = downlink_frequency[0][0];
|
||||
downlink_frequency[CC_id][2] = downlink_frequency[0][0];
|
||||
downlink_frequency[CC_id][3] = downlink_frequency[0][0];
|
||||
printf("Downlink for CC_id %d frequency set to %u\n", CC_id, downlink_frequency[CC_id][0]);
|
||||
}
|
||||
UE_scan=0;
|
||||
}
|
||||
|
||||
|
||||
if (frame_parms[0]->N_RB_DL !=0) {
|
||||
if ( frame_parms[0]->N_RB_DL < 6 ) {
|
||||
frame_parms[0]->N_RB_DL = 6;
|
||||
printf ( "%i: Invalid number of ressource blocks, adjusted to 6\n",frame_parms[0]->N_RB_DL);
|
||||
}
|
||||
if ( frame_parms[0]->N_RB_DL > 100 ) {
|
||||
frame_parms[0]->N_RB_DL = 100;
|
||||
printf ( "%i: Invalid number of ressource blocks, adjusted to 100\n",frame_parms[0]->N_RB_DL);
|
||||
}
|
||||
if ( frame_parms[0]->N_RB_DL > 50 && frame_parms[0]->N_RB_DL < 100 ) {
|
||||
frame_parms[0]->N_RB_DL = 50;
|
||||
printf ( "%i: Invalid number of ressource blocks, adjusted to 50\n",frame_parms[0]->N_RB_DL);
|
||||
}
|
||||
if ( frame_parms[0]->N_RB_DL > 25 && frame_parms[0]->N_RB_DL < 50 ) {
|
||||
frame_parms[0]->N_RB_DL = 25;
|
||||
printf ( "%i: Invalid number of ressource blocks, adjusted to 25\n",frame_parms[0]->N_RB_DL);
|
||||
}
|
||||
UE_scan = 0;
|
||||
frame_parms[0]->N_RB_UL=frame_parms[0]->N_RB_DL;
|
||||
for (CC_id=1; CC_id<MAX_NUM_CCs; CC_id++) {
|
||||
frame_parms[CC_id]->N_RB_DL=frame_parms[0]->N_RB_DL;
|
||||
frame_parms[CC_id]->N_RB_UL=frame_parms[0]->N_RB_UL;
|
||||
}
|
||||
}
|
||||
|
||||
static void get_options (int argc, char **argv) {
|
||||
|
||||
for (CC_id=1;CC_id<MAX_NUM_CCs;CC_id++) {
|
||||
tx_max_power[CC_id]=tx_max_power[0];
|
||||
rx_gain[0][CC_id] = rx_gain[0][0];
|
||||
tx_gain[0][CC_id] = tx_gain[0][0];
|
||||
}
|
||||
} /* UE_flag > 0 */
|
||||
#if T_TRACER
|
||||
paramdef_t cmdline_ttraceparams[] =CMDLINE_TTRACEPARAMS_DESC ;
|
||||
config_process_cmdline( cmdline_ttraceparams,sizeof(cmdline_ttraceparams)/sizeof(paramdef_t),NULL);
|
||||
#endif
|
||||
|
||||
|
||||
if (UE_flag == 0) {
|
||||
memset((void*)&RC,0,sizeof(RC));
|
||||
/* Read RC configuration file */
|
||||
RCConfig(NULL);
|
||||
NB_eNB_INST = RC.nb_inst;
|
||||
NB_RU = RC.nb_RU;
|
||||
printf("Configuration: nb_inst %d, nb_ru %d\n",NB_eNB_INST,NB_RU);
|
||||
|
||||
|
||||
} else if (UE_flag == 1) {
|
||||
if (conf_config_file_name != NULL) {
|
||||
|
||||
// Here the configuration file is the XER encoded UE capabilities
|
||||
// Read it in and store in asn1c data structures
|
||||
strcpy(uecap_xer,conf_config_file_name);
|
||||
uecap_xer_in=1;
|
||||
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
static void old_get_options (int argc, char **argv) {
|
||||
int c;
|
||||
// char line[1000];
|
||||
// int l;
|
||||
int k,i;//,j,k;
|
||||
int i;
|
||||
#if defined(OAI_USRP) || defined(CPRIGW)
|
||||
int clock_src;
|
||||
#endif
|
||||
@@ -1233,7 +1345,7 @@ void init_openair0() {
|
||||
}
|
||||
|
||||
|
||||
void wait_RUs() {
|
||||
void wait_RUs(void) {
|
||||
|
||||
LOG_I(PHY,"Waiting for RUs to be configured ...\n");
|
||||
|
||||
@@ -1249,7 +1361,7 @@ void wait_RUs() {
|
||||
LOG_I(PHY,"RUs configured\n");
|
||||
}
|
||||
|
||||
void wait_eNBs() {
|
||||
void wait_eNBs(void) {
|
||||
|
||||
int i,j;
|
||||
int waiting=1;
|
||||
@@ -1271,12 +1383,11 @@ void wait_eNBs() {
|
||||
|
||||
int main( int argc, char **argv )
|
||||
{
|
||||
int i,j,k,aa,re;
|
||||
int i;
|
||||
#if defined (XFORMS)
|
||||
void *status;
|
||||
#endif
|
||||
|
||||
int inst;
|
||||
int CC_id;
|
||||
int ru_id;
|
||||
uint8_t abstraction_flag=0;
|
||||
@@ -1287,7 +1398,11 @@ int main( int argc, char **argv )
|
||||
#endif
|
||||
|
||||
start_background_system();
|
||||
if ( load_configmodule(argc,argv) == NULL) {
|
||||
exit_fun("[SOFTMODEM] Error, configuration module init failed\n");
|
||||
}
|
||||
|
||||
|
||||
#ifdef DEBUG_CONSOLE
|
||||
setvbuf(stdout, NULL, _IONBF, 0);
|
||||
setvbuf(stderr, NULL, _IONBF, 0);
|
||||
@@ -1310,8 +1425,15 @@ int main( int argc, char **argv )
|
||||
|
||||
printf("Reading in command-line options\n");
|
||||
// get options and fill parameters from configuration file
|
||||
get_options (argc, argv); //Command-line options, enb_properties
|
||||
|
||||
// temporary test to allow legacy config or config module */
|
||||
|
||||
if ( CONFIG_ISFLAGSET(CONFIG_LEGACY) == 0) {
|
||||
printf("configuration via the configuration module \n");
|
||||
get_options (); //Command-line options, enb_properties
|
||||
} else {
|
||||
printf("Legacy configuration mode \n");
|
||||
old_get_options (argc,argv);
|
||||
}
|
||||
|
||||
|
||||
#if T_TRACER
|
||||
@@ -1738,7 +1860,7 @@ int main( int argc, char **argv )
|
||||
sync_var=0;
|
||||
pthread_cond_broadcast(&sync_cond);
|
||||
pthread_mutex_unlock(&sync_mutex);
|
||||
|
||||
end_configmodule();
|
||||
|
||||
// wait for end of program
|
||||
printf("TYPE <CTRL-C> TO TERMINATE\n");
|
||||
|
||||
@@ -40,6 +40,131 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/* help strings definition for command line options */
|
||||
#define CONFIG_HLP_RFCFGF "Configuration file for front-end (e.g. LMS7002M)\n"
|
||||
#define CONFIG_HLP_ULMAXE "set the eNodeB max ULSCH erros\n"
|
||||
#define CONFIG_HLP_CALUER "set UE RX calibration\n"
|
||||
#define CONFIG_HLP_CALUERM ""
|
||||
#define CONFIG_HLP_CALUERB ""
|
||||
#define CONFIG_HLP_DBGUEPR "UE run normal prach power ramping, but don't continue random-access\n"
|
||||
#define CONFIG_HLP_CALPRACH "UE run normal prach with maximum power, but don't continue random-access\n"
|
||||
#define CONFIG_HLP_NOL2CN "bypass L2 and upper layers\n"
|
||||
#define CONFIG_HLP_UERXG "set UE RX gain\n"
|
||||
#define CONFIG_HLP_UERXGOFF "external UE amplifier offset\n"
|
||||
#define CONFIG_HLP_UETXG "set UE TX gain\n"
|
||||
#define CONFIG_HLP_UENANTR "set UE number of rx antennas\n"
|
||||
#define CONFIG_HLP_UENANTT "set UE number of tx antennas\n"
|
||||
#define CONFIG_HLP_UESCAN "set UE to scan around carrier\n"
|
||||
#define CONFIG_HLP_DUMPFRAME "dump UE received frame to rxsig_frame0.dat and exit\n"
|
||||
#define CONFIG_HLP_DLSHIFT "dynamic shift for LLR compuation for TM3/4 (default 0)\n"
|
||||
#define CONFIG_HLP_UELOOP "get softmodem (UE) to loop through memory instead of acquiring from HW\n"
|
||||
#define CONFIG_HLP_PHYTST "test UE phy layer, mac disabled\n"
|
||||
#define CONFIG_HLP_DMAMAP "sets flag for improved EXMIMO UE performance\n"
|
||||
#define CONFIG_HLP_EXCCLK "tells hardware to use an external clock reference\n"
|
||||
#define CONFIG_HLP_USIM "use XOR autentication algo in case of test usim mode\n"
|
||||
#define CONFIG_HLP_NOSNGLT "Disables single-thread mode in lte-softmodem\n"
|
||||
#define CONFIG_HLP_TADV "Set timing_advance\n"
|
||||
#define CONFIG_HLP_DLF "Set the downlink frequency for all component carriers\n"
|
||||
#define CONFIG_HLP_CHOFF "Channel id offset"
|
||||
#define CONFIG_HLP_SOFTS "Enable soft scope and L1 and L2 stats (Xforms)\n"
|
||||
#define CONFIG_HLP_EXMCAL "Calibrate the EXMIMO borad, available files: exmimo2_2arxg.lime exmimo2_2brxg.lime \n"
|
||||
#define CONFIG_HLP_LOGL "Set the global log level, valide options: (9:trace, 8/7:debug, 6:info, 4:warn, 3:error)\n"
|
||||
#define CONFIG_HLP_LOGV "Set the global log verbosity \n"
|
||||
#define CONFIG_HLP_ITTIL "Generate ITTI analyzser logs (similar to wireshark logs but with more details)\n"
|
||||
#define CONFIG_HLP_DLMCS "Set the maximum downlink MCS\n"
|
||||
#define CONFIG_HLP_STMON "Enable processing timing measurement of lte softmodem on per subframe basis \n"
|
||||
#define CONFIG_HLP_PRB "Set the PRB, valid values: 6, 25, 50, 100 \n"
|
||||
#define CONFIG_HLP_MSLOTS "Skip the missed slots/subframes \n"
|
||||
#define CONFIG_HLP_ULMCS "Set the maximum uplink MCS\n"
|
||||
#define CONFIG_HLP_TDD "Set hardware to TDD mode (default: FDD). Used only with -U (otherwise set in config file).\n"
|
||||
#define CONFIG_HLP_UE "Set the lte softmodem as a UE\n"
|
||||
#define CONFIG_HLP_L2MONW "Enable L2 wireshark messages on localhost \n"
|
||||
#define CONFIG_HLP_L2MONP "Enable L2 pcap messages on localhost \n"
|
||||
#define CONFIG_HLP_VCD "Enable VCD (generated file will is named openair_dump_eNB.vcd, read it with target/RT/USER/eNB.gtkw\n"
|
||||
#define CONFIG_HLP_FLOG "Enable PDCP RCP online log file\n"
|
||||
#define CONFIG_HLP_TQFS "Apply three-quarter of sampling frequency, 23.04 Msps to reduce the data rate on USB/PCIe transfers (only valid for 20 MHz)\n"
|
||||
#define CONFIG_HLP_TPORT "tracer port\n"
|
||||
#define CONFIG_HLP_NOTWAIT "don't wait for tracer, start immediately\n"
|
||||
#define CONFIG_HLP_TNOFORK "to ease debugging with gdb\n"
|
||||
|
||||
/* command line options definitions */
|
||||
|
||||
#define CMDLINE_CALIBUERX_IDX 0
|
||||
#define CMDLINE_CALIBUERXMED_IDX 1
|
||||
#define CMDLINE_CALIBUERXBYP_IDX 2
|
||||
#define CMDLINE_DEBUGUEPRACH_IDX 3
|
||||
#define CMDLINE_NOL2CONNECT_IDX 4
|
||||
#define CMDLINE_CALIBPRACHTX_IDX 5
|
||||
#define CMDLINE_MEMLOOP_IDX 6
|
||||
|
||||
#define CMDLINE_UEMODEPARAMS_DESC { \
|
||||
{"calib-ue-rx", "", CONFIG_HLP_CALUER, 0, iptr:&rx_input_level_dBm, defintval:0, TYPE_INT, 0}, \
|
||||
{"calib-ue-rx-med", "", CONFIG_HLP_CALUERM, 0, iptr:&rx_input_level_dBm, defintval:0, TYPE_INT, 0}, \
|
||||
{"calib-ue-rx-byp", "", CONFIG_HLP_CALUERB, 0, iptr:&rx_input_level_dBm, defintval:0, TYPE_INT, 0}, \
|
||||
{"debug-ue-prach", "", CONFIG_HLP_DBGUEPR, PARAMFLAG_BOOL, uptr:NULL, defuintval:1, TYPE_INT, 0}, \
|
||||
{"no-L2-connect", "", CONFIG_HLP_NOL2CN, PARAMFLAG_BOOL, uptr:NULL, defuintval:1, TYPE_INT, 0}, \
|
||||
{"calib-prach-tx", "", CONFIG_HLP_CALPRACH, PARAMFLAG_BOOL, uptr:NULL, defuintval:1, TYPE_INT, 0}, \
|
||||
{"loop-memory", "", CONFIG_HLP_UELOOP, 0, strptr:&loopfile, defstrval:"iqs.in", TYPE_STRING,0}, \
|
||||
{"ue-dump-frame", "", CONFIG_HLP_DUMPFRAME, PARAMFLAG_BOOL, iptr:&dumpframe, defintval:0, TYPE_INT, 0}, \
|
||||
}
|
||||
|
||||
#define CMDLINE_UEPARAMS_DESC { \
|
||||
{"ue-rxgain", "", CONFIG_HLP_UERXG, 0, dblptr:&(rx_gain[0][0]), defdblval:0, TYPE_DOUBLE, 0}, \
|
||||
{"ue-rxgain-off", "", CONFIG_HLP_UERXGOFF, 0, dblptr:&rx_gain_off, defdblval:0, TYPE_DOUBLE, 0}, \
|
||||
{"ue-txgain", "", CONFIG_HLP_UETXG, 0, dblptr:&(tx_gain[0][0]), defdblval:0, TYPE_DOUBLE, 0}, \
|
||||
{"ue-nb-ant-rx", "", CONFIG_HLP_UENANTR, 0, u8ptr:&nb_antenna_rx, defuintval:1, TYPE_UINT8, 0}, \
|
||||
{"ue-nb-ant-tx", "", CONFIG_HLP_UENANTT, 0, u8ptr:&nb_antenna_tx, defuintval:1, TYPE_UINT8, 0}, \
|
||||
{"ue-scan-carrier", "", CONFIG_HLP_UESCAN, PARAMFLAG_BOOL, iptr:&UE_scan_carrier, defintval:0, TYPE_INT, 0}, \
|
||||
{"ue-max-power", "", NULL, 0, iptr:&(tx_max_power[0]), defintval:90, TYPE_INT, 0}, \
|
||||
{"" , "r", CONFIG_HLP_PRB, 0, u8ptr:&(frame_parms[0]->N_RB_DL), defintval:0, TYPE_UINT8, 0}, \
|
||||
}
|
||||
|
||||
|
||||
extern int16_t dlsch_demod_shift;
|
||||
#define CMDLINE_PARAMS_DESC { \
|
||||
{"rf-config-file", "", CONFIG_HLP_RFCFGF, 0, strptr:(char **)&rf_config_file, defstrval:NULL, TYPE_STRING, sizeof(rf_config_file)}, \
|
||||
{"ulsch-max-errors", "", CONFIG_HLP_ULMAXE, 0, uptr:&ULSCH_max_consecutive_errors, defuintval:0, TYPE_UINT, 0}, \
|
||||
{"phy-test", "", CONFIG_HLP_PHYTST, PARAMFLAG_BOOL, iptr:&phy_test, defintval:0, TYPE_INT, 0}, \
|
||||
{"usim-test", "", CONFIG_HLP_USIM, PARAMFLAG_BOOL, u8ptr:&usim_test, defintval:0, TYPE_UINT8, 0}, \
|
||||
{"mmapped-dma", "", CONFIG_HLP_DMAMAP, PARAMFLAG_BOOL, uptr:&mmapped_dma, defintval:0, TYPE_INT, 0}, \
|
||||
{"external-clock", "", CONFIG_HLP_EXCCLK, PARAMFLAG_BOOL, uptr:&clock_source, defintval:0, TYPE_INT, 0}, \
|
||||
{"wait-for-sync", "", NULL, PARAMFLAG_BOOL, iptr:&wait_for_sync, defintval:0, TYPE_INT, 0}, \
|
||||
{"single-thread-disable","", CONFIG_HLP_NOSNGLT, PARAMFLAG_BOOL, iptr:&single_thread_flag, defintval:1, TYPE_INT, 0}, \
|
||||
{"threadIQ", "", NULL, 0, iptr:&(threads.iq), defintval:1, TYPE_INT, 0}, \
|
||||
{"threadOddSubframe", "", NULL, 0, iptr:&(threads.odd), defintval:1, TYPE_INT, 0}, \
|
||||
{"threadEvenSubframe", "", NULL, 0, iptr:&(threads.even), defintval:1, TYPE_INT, 0}, \
|
||||
{"dlsch-demod-shift", "", CONFIG_HLP_DLSHIFT, 0, iptr:(int32_t *)&dlsch_demod_shift, defintval:0, TYPE_INT, 0}, \
|
||||
{"" , "A", CONFIG_HLP_TADV, 0, uptr:&timing_advance, defintval:0, TYPE_UINT, 0}, \
|
||||
{"" , "C", CONFIG_HLP_DLF, 0, uptr:&(downlink_frequency[0][0]), defuintval:2680000000, TYPE_UINT, 0}, \
|
||||
{"" , "a", CONFIG_HLP_CHOFF, 0, iptr:&chain_offset, defintval:0, TYPE_INT, 0}, \
|
||||
{"" , "d", CONFIG_HLP_SOFTS, 0, i8ptr:&do_forms, defintval:0, TYPE_INT8, 0}, \
|
||||
{"" , "E", CONFIG_HLP_TQFS, PARAMFLAG_BOOL, i8ptr:&threequarter_fs, defintval:0, TYPE_INT8, 0}, \
|
||||
{"" , "K", CONFIG_HLP_ITTIL, PARAMFLAG_NOFREE, strptr:&itti_dump_file, defstrval:"/tmp/itti.dump", TYPE_STRING, 0}, \
|
||||
{"" , "U", CONFIG_HLP_UE, PARAMFLAG_BOOL, i8ptr:&UE_flag, defintval:0, TYPE_INT8, 0}, \
|
||||
{"" , "m", CONFIG_HLP_DLMCS, 0, uptr:&target_dl_mcs, defintval:0, TYPE_UINT, 0}, \
|
||||
{"" , "t", CONFIG_HLP_ULMCS, 0, uptr:&target_ul_mcs, defintval:0, TYPE_UINT, 0}, \
|
||||
{"" , "W", CONFIG_HLP_L2MONW, 0, strptr:(char **)&in_ip, defstrval:"127.0.0.1", TYPE_STRING, sizeof(in_ip)}, \
|
||||
{"" , "P", CONFIG_HLP_L2MONP, 0, strptr:(char **)&in_path, defstrval:"/tmp/oai_opt.pcap", TYPE_STRING, sizeof(in_path)}, \
|
||||
{"" , "V", CONFIG_HLP_VCD, PARAMFLAG_BOOL, iptr:&ouput_vcd, defintval:0, TYPE_INT, 0}, \
|
||||
{"" , "q", CONFIG_HLP_STMON, PARAMFLAG_BOOL, iptr:&opp_enabled, defintval:0, TYPE_INT, 0}, \
|
||||
{"" , "R", CONFIG_HLP_FLOG, PARAMFLAG_BOOL, iptr:&online_log_messages, defintval:0, TYPE_INT, 0}, \
|
||||
{"" , "g", CONFIG_HLP_LOGL, 0, i16ptr:&glog_level, defintval:1, TYPE_INT16, 0}, \
|
||||
{"" , "G", CONFIG_HLP_LOGV, 0, i16ptr:&glog_verbosity, defintval:0, TYPE_INT16, 0}, \
|
||||
{"" , "S", CONFIG_HLP_MSLOTS, PARAMFLAG_BOOL, u8ptr:&exit_missed_slots, defintval:1, TYPE_UINT8, 0}, \
|
||||
{"" , "T", CONFIG_HLP_TDD, PARAMFLAG_BOOL, iptr:&tddflag, defintval:0, TYPE_INT, 0} \
|
||||
}
|
||||
|
||||
extern int T_port;
|
||||
extern int T_wait;
|
||||
extern int T_dont_fork;
|
||||
|
||||
#define CMDLINE_TTRACEPARAMS_DESC { \
|
||||
{"T_port", "", CONFIG_HLP_TPORT, 0, uptr:&T_port, defuintval:0, TYPE_UINT, 0}, \
|
||||
{"T_nowait", "", CONFIG_HLP_NOTWAIT, PARAMFLAG_BOOL, uptr:&T_nowait, defuintval:0, TYPE_UINT, 0}, \
|
||||
{"T_dont_fork", "", CONFIG_HLP_TNOFORK, PARAMFLAG_BOOL, uptr:&T_dont_fork, defuintval:1, TYPE_UINT, 0}, \
|
||||
}
|
||||
|
||||
/* */
|
||||
extern pthread_cond_t sync_cond;
|
||||
extern pthread_mutex_t sync_mutex;
|
||||
extern int sync_var;
|
||||
|
||||
Reference in New Issue
Block a user