diff --git a/ci-scripts/reportTestLocally.sh b/ci-scripts/reportTestLocally.sh index 717b5f73e9..f228946076 100755 --- a/ci-scripts/reportTestLocally.sh +++ b/ci-scripts/reportTestLocally.sh @@ -215,6 +215,14 @@ function report_test { BW_CASES=(05 10 20) for TMODE in ${TRANS_MODES[@]} do + echo " " >> ./test_simulator_results.html + if [[ $TMODE =~ .*fdd.* ]] + then + echo " Test in FDD" >> ./test_simulator_results.html + else + echo " Test in TDD" >> ./test_simulator_results.html + fi + echo " " >> ./test_simulator_results.html for BW in ${BW_CASES[@]} do ENB_LOG=$ARCHIVES_LOC/${TMODE}_${BW}MHz_enb.log @@ -526,7 +534,7 @@ function report_test { echo " " >> ./test_simulator_results.html echo " " >> ./test_simulator_results.html fi - PING_LOGS=`ls $ARCHIVES_LOC/${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_ping*.txt` + PING_LOGS=`ls $ARCHIVES_LOC/${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_ping*.log` for PING_CASE in $PING_LOGS do echo " " >> ./test_simulator_results.html diff --git a/ci-scripts/runTestOnVM.sh b/ci-scripts/runTestOnVM.sh index 7ff42405e3..88d510a079 100755 --- a/ci-scripts/runTestOnVM.sh +++ b/ci-scripts/runTestOnVM.sh @@ -341,6 +341,35 @@ function recover_core_dump { fi } +function full_terminate { + echo "############################################################" + echo "Terminate enb/ue simulators" + echo "############################################################" + terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR 0 + scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC + scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC + recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC + sleep 10 +} + +function full_basic_sim_destroy { + if [ $KEEP_VM_ALIVE -eq 0 ] + then + echo "############################################################" + echo "Destroying VMs" + echo "############################################################" + uvt-kvm destroy $VM_NAME + ssh-keygen -R $VM_IP_ADDR + uvt-kvm destroy $EPC_VM_NAME + ssh-keygen -R $EPC_VM_IP_ADDR + if [ -e $JENKINS_WKSP/flexran/flexran_build_complete.txt ] + then + uvt-kvm destroy $FLEXRAN_CTL_VM_NAME + ssh-keygen -R $FLEXRAN_CTL_VM_IP_ADDR + fi + fi +} + function install_epc_on_vm { local LOC_EPC_VM_NAME=$1 local LOC_EPC_VM_CMDS=$2 @@ -755,6 +784,21 @@ function start_l2_sim_ue { sleep 10 } +function full_l2_sim_destroy { + if [ $KEEP_VM_ALIVE -eq 0 ] + then + echo "############################################################" + echo "Destroying VMs" + echo "############################################################" + uvt-kvm destroy $ENB_VM_NAME + ssh-keygen -R $ENB_VM_IP_ADDR + uvt-kvm destroy $UE_VM_NAME + ssh-keygen -R $UE_VM_IP_ADDR + uvt-kvm destroy $EPC_VM_NAME + ssh-keygen -R $EPC_VM_IP_ADDR + fi +} + function run_test_on_vm { echo "############################################################" echo "OAI CI VM script" @@ -936,176 +980,89 @@ function run_test_on_vm { # Retrieve EPC real IP address retrieve_real_epc_ip_addr $EPC_VM_NAME $EPC_VM_CMDS $EPC_VM_IP_ADDR - echo "############################################################" - echo "Starting the eNB in FDD-5MHz mode" - echo "############################################################" - CURRENT_ENB_LOG_FILE=fdd_05MHz_enb.log - start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 25 lte-fdd-basic-sim.conf none + TRANS_MODES=("fdd" "tdd") + BW_CASES=(05 10 20) - echo "############################################################" - echo "Starting the UE in FDD-5MHz mode" - echo "############################################################" - CURRENT_UE_LOG_FILE=fdd_05MHz_ue.log - start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 25 2680 - if [ $UE_SYNC -eq 0 ] - then - echo "Problem w/ eNB and UE not syncing" - terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR 0 - scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC - scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC - recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC - terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR - echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log - STATUS=-1 - return - fi - get_ue_ip_addr $VM_CMDS $VM_IP_ADDR + for TMODE in ${TRANS_MODES[@]} + do + for BW in ${BW_CASES[@]} + do + # Not Running in TDD-10MHz and TDD-20MHz : too unstable + if [[ $TMODE =~ .*tdd.* ]] && [[ $BW =~ .*10.* ]]; then continue; fi + if [[ $TMODE =~ .*tdd.* ]] && [[ $BW =~ .*20.* ]]; then continue; fi - echo "############################################################" - echo "Pinging the UE" - echo "############################################################" - PING_LOG_FILE=fdd_05MHz_ping_ue.txt - ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE - scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC - check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20 + if [[ $BW =~ .*05.* ]]; then PRB=25; fi + if [[ $BW =~ .*10.* ]]; then PRB=50; fi + if [[ $BW =~ .*20.* ]]; then PRB=100; fi + if [[ $TMODE =~ .*fdd.* ]]; then FREQUENCY=2680; else FREQUENCY=2350; fi - echo "############################################################" - echo "Iperf DL" - echo "############################################################" - CURR_IPERF_LOG_BASE=fdd_05MHz_iperf_dl - iperf_dl $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 10 $CURR_IPERF_LOG_BASE - scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC - scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC - check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE 10 + echo "############################################################" + echo "Starting the eNB in ${TMODE}-${BW}MHz mode" + echo "############################################################" + CURRENT_ENB_LOG_FILE=${TMODE}_${BW}MHz_enb.log + start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE $PRB lte-${TMODE}-basic-sim.conf none - echo "############################################################" - echo "Iperf UL" - echo "############################################################" - CURR_IPERF_LOG_BASE=fdd_05MHz_iperf_ul - iperf_ul $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 2 $CURR_IPERF_LOG_BASE - scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC - scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC - check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE 2 + echo "############################################################" + echo "Starting the UE in ${TMODE}-${BW}MHz mode" + echo "############################################################" + CURRENT_UE_LOG_FILE=${TMODE}_${BW}MHz_ue.log + start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE $PRB $FREQUENCY + if [ $UE_SYNC -eq 0 ] + then + echo "Problem w/ eNB and UE not syncing" + terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR 0 + scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC + scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC + recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC + terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR + full_basic_sim_destroy + echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log + STATUS=-1 + return + fi + get_ue_ip_addr $VM_CMDS $VM_IP_ADDR - echo "############################################################" - echo "Terminate enb/ue simulators" - echo "############################################################" - terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR 0 - scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC - scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC - recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC - sleep 10 + echo "############################################################" + echo "Pinging the UE" + echo "############################################################" + PING_LOG_FILE=${TMODE}_${BW}MHz_ping_ue.txt + ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE + scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC + check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20 - echo "############################################################" - echo "Starting the eNB in FDD-10MHz mode" - echo "############################################################" - CURRENT_ENB_LOG_FILE=fdd_10MHz_enb.log - start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 50 lte-fdd-basic-sim.conf none + # Not more testing in TDD-5MHz : too unstable + if [[ $TMODE =~ .*tdd.* ]] && [[ $BW =~ .*05.* ]]; then full_terminate; continue; fi + echo "############################################################" + echo "Iperf DL" + echo "############################################################" + if [[ $TMODE =~ .*fdd.* ]] + then + if [[ $BW =~ .*20.* ]]; then THROUGHPUT=12; else THROUGHPUT=10; fi + else + THROUGHPUT=6 + fi + CURR_IPERF_LOG_BASE=${TMODE}_${BW}MHz_iperf_dl + iperf_dl $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR $THROUGHPUT $CURR_IPERF_LOG_BASE + scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC + scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC + check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE $THROUGHPUT - echo "############################################################" - echo "Starting the UE in FDD-10MHz mode" - echo "############################################################" - CURRENT_UE_LOG_FILE=fdd_10MHz_ue.log - start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 50 2680 - if [ $UE_SYNC -eq 0 ] - then - echo "Problem w/ eNB and UE not syncing" - terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR 0 - scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC - scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC - recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC - terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR - echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log - STATUS=-1 - return - fi - get_ue_ip_addr $VM_CMDS $VM_IP_ADDR + # Not more testing in FDD-20MHz : too unstable + if [[ $TMODE =~ .*fdd.* ]] && [[ $BW =~ .*20.* ]]; then full_terminate; continue; fi + echo "############################################################" + echo "Iperf UL" + echo "############################################################" + THROUGHPUT=2 + CURR_IPERF_LOG_BASE=${TMODE}_${BW}MHz_iperf_ul + iperf_ul $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR $THROUGHPUT $CURR_IPERF_LOG_BASE + scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC + scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC + check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE $THROUGHPUT - echo "############################################################" - echo "Pinging the UE" - echo "############################################################" - PING_LOG_FILE=fdd_10MHz_ping_ue.txt - ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE - scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC - check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20 + full_terminate - echo "############################################################" - echo "Iperf DL" - echo "############################################################" - CURR_IPERF_LOG_BASE=fdd_10MHz_iperf_dl - iperf_dl $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 10 $CURR_IPERF_LOG_BASE - scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC - scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC - check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE 10 - - echo "############################################################" - echo "Iperf UL" - echo "############################################################" - CURR_IPERF_LOG_BASE=fdd_10MHz_iperf_ul - iperf_ul $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 2 $CURR_IPERF_LOG_BASE - scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC - scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC - check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE 2 - - echo "############################################################" - echo "Terminate enb/ue simulators" - echo "############################################################" - terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR 0 - scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC - scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC - recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC - sleep 10 - - echo "############################################################" - echo "Starting the eNB in FDD-20MHz mode" - echo "############################################################" - CURRENT_ENB_LOG_FILE=fdd_20MHz_enb.log - start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 100 lte-fdd-basic-sim.conf none - - echo "############################################################" - echo "Starting the UE in FDD-20MHz mode" - echo "############################################################" - CURRENT_UE_LOG_FILE=fdd_20MHz_ue.log - start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 100 2680 - if [ $UE_SYNC -eq 0 ] - then - echo "Problem w/ eNB and UE not syncing" - terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR 0 - scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC - scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC - recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC - terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR - echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log - STATUS=-1 - return - fi - get_ue_ip_addr $VM_CMDS $VM_IP_ADDR - - echo "############################################################" - echo "Pinging the UE" - echo "############################################################" - PING_LOG_FILE=fdd_20MHz_ping_ue.txt - ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE - scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC - check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20 - - echo "############################################################" - echo "Iperf DL" - echo "############################################################" - CURR_IPERF_LOG_BASE=fdd_20MHz_iperf_dl - iperf_dl $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 12 $CURR_IPERF_LOG_BASE - scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC - scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC - check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE 12 - - echo "############################################################" - echo "Terminate enb/ue simulators" - echo "############################################################" - terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR 0 - scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC - scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC - recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC - sleep 10 + done + done if [ -d $JENKINS_WKSP/flexran ] then @@ -1139,6 +1096,7 @@ function run_test_on_vm { then echo "ERROR: Flexran Ctl VM is not alive" terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR + full_basic_sim_destroy echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log STATUS=-1 return @@ -1199,183 +1157,13 @@ function run_test_on_vm { scp -o StrictHostKeyChecking=no ubuntu@$FLEXRAN_CTL_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/flexran_ctl_*.log $ARCHIVES_LOC fi - echo "############################################################" - echo "Starting the eNB in TDD-5MHz mode" - echo "############################################################" - CURRENT_ENB_LOG_FILE=tdd_05MHz_enb.log - start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 25 lte-tdd-basic-sim.conf none - - echo "############################################################" - echo "Starting the UE in TDD-5MHz mode" - echo "############################################################" - CURRENT_UE_LOG_FILE=tdd_05MHz_ue.log - start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 25 2350 - if [ $UE_SYNC -eq 0 ] - then - echo "Problem w/ eNB and UE not syncing" - terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR 0 - scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC - scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC - recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC - terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR - echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log - STATUS=-1 - return - fi - get_ue_ip_addr $VM_CMDS $VM_IP_ADDR - - echo "############################################################" - echo "Pinging the UE" - echo "############################################################" - PING_LOG_FILE=tdd_05MHz_ping_ue.txt - ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE - scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC - check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20 - -# Bug in TDD 5Mhz --- not running it -# echo "############################################################" -# echo "Iperf DL" -# echo "############################################################" -# CURR_IPERF_LOG_BASE=tdd_05MHz_iperf_dl -# iperf_dl $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 6 $CURR_IPERF_LOG_BASE -# scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC -# scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC -# check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE 6 - - echo "############################################################" - echo "Terminate enb/ue simulators" - echo "############################################################" - terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR 0 - scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC - scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC - recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC - sleep 10 - - echo "############################################################" - echo "Starting the eNB in TDD-10MHz mode" - echo "############################################################" - CURRENT_ENB_LOG_FILE=tdd_10MHz_enb.log - start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 50 lte-tdd-basic-sim.conf none - -# Disabling TDD-10MHz in order to stop getting false negatives -# echo "############################################################" -# echo "Starting the UE in TDD-10MHz mode" -# echo "############################################################" -# CURRENT_UE_LOG_FILE=tdd_10MHz_ue.log -# start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 50 2350 -# if [ $UE_SYNC -eq 0 ] -# then -# echo "Problem w/ eNB and UE not syncing" -# terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR 0 -# scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC -# scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC -# recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC -# terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR -# echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log -# STATUS=-1 -# return -# fi -# get_ue_ip_addr $VM_CMDS $VM_IP_ADDR -# -# echo "############################################################" -# echo "Pinging the UE" -# echo "############################################################" -# PING_LOG_FILE=tdd_10MHz_ping_ue.txt -# ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE -# scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC -# check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20 -# -# echo "############################################################" -# echo "Iperf DL" -# echo "############################################################" -# CURR_IPERF_LOG_BASE=tdd_10MHz_iperf_dl -# iperf_dl $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 6 $CURR_IPERF_LOG_BASE -# scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC -# scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC -# check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE 6 -# -# echo "############################################################" -# echo "Terminate enb/ue simulators" -# echo "############################################################" -# terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR 0 -# scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC -# scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC -# recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC -# sleep 10 -# -# Disabling TDD-20MHz in order to stop getting false negatives -# echo "############################################################" -# echo "Starting the eNB in TDD-20MHz mode" -# echo "############################################################" -# CURRENT_ENB_LOG_FILE=tdd_20MHz_enb.log -# start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 100 lte-tdd-basic-sim.conf none -# -# echo "############################################################" -# echo "Starting the UE in TDD-20MHz mode" -# echo "############################################################" -# CURRENT_UE_LOG_FILE=tdd_20MHz_ue.log -# start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 100 2350 -# if [ $UE_SYNC -eq 0 ] -# then -# echo "Problem w/ eNB and UE not syncing" -# terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR 0 -# scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC -# scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC -# recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC -# terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR -# echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log -# STATUS=-1 -# return -# fi -# get_ue_ip_addr $VM_CMDS $VM_IP_ADDR -# -# echo "############################################################" -# echo "Pinging the UE" -# echo "############################################################" -# PING_LOG_FILE=tdd_20MHz_ping_ue.txt -# ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE -# scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC -# check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20 -# -# echo "############################################################" -# echo "Iperf DL" -# echo "############################################################" -# CURR_IPERF_LOG_BASE=tdd_20MHz_iperf_dl -# iperf_dl $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 6 $CURR_IPERF_LOG_BASE -# scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC -# scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC -# check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE 6 -# -# echo "############################################################" -# echo "Terminate enb/ue simulators" -# echo "############################################################" -# terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR 0 -# scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC -# scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC -# recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC -# sleep 10 - echo "############################################################" echo "Terminate EPC" echo "############################################################" terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR - if [ $KEEP_VM_ALIVE -eq 0 ] - then - echo "############################################################" - echo "Destroying VMs" - echo "############################################################" - uvt-kvm destroy $VM_NAME - ssh-keygen -R $VM_IP_ADDR - uvt-kvm destroy $EPC_VM_NAME - ssh-keygen -R $EPC_VM_IP_ADDR - if [ -e $JENKINS_WKSP/flexran/flexran_build_complete.txt ] - then - uvt-kvm destroy $FLEXRAN_CTL_VM_NAME - ssh-keygen -R $FLEXRAN_CTL_VM_IP_ADDR - fi - fi + full_basic_sim_destroy echo "############################################################" echo "Checking run status" @@ -1415,244 +1203,128 @@ function run_test_on_vm { # adding 16 users to EPC subscriber lists add_user_to_epc_lists $EPC_VM_CMDS $EPC_VM_IP_ADDR 16 - # For re-runs - add_ue_l2_sim_ue $UE_VM_CMDS $UE_VM_IP_ADDR 1 + EPC_CONFIGS=("wS1" "noS1") + TRANS_MODES=("fdd") + BW_CASES=(05) + NB_USERS=(01 04) + for CN_CONFIG in ${EPC_CONFIGS[@]} + do + if [[ $CN_CONFIG =~ .*wS1.* ]] + then + echo "############################################################" + echo "Start EPC for the wS1 configuration" + echo "############################################################" + start_epc $EPC_VM_NAME $EPC_VM_CMDS $EPC_VM_IP_ADDR - # Starting EPC - start_epc $EPC_VM_NAME $EPC_VM_CMDS $EPC_VM_IP_ADDR + # Retrieve EPC real IP address + retrieve_real_epc_ip_addr $EPC_VM_NAME $EPC_VM_CMDS $EPC_VM_IP_ADDR + S1_NOS1_CFG=1 + else + echo "############################################################" + echo "Terminate EPC" + echo "############################################################" + terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR - # Retrieve EPC real IP address - retrieve_real_epc_ip_addr $EPC_VM_NAME $EPC_VM_CMDS $EPC_VM_IP_ADDR + echo "############################################################" + echo "Running now in a no-S1 configuration" + echo "############################################################" + S1_NOS1_CFG=0 + fi + for TMODE in ${TRANS_MODES[@]} + do + for BW in ${BW_CASES[@]} + do + for UES in ${NB_USERS[@]} + do + INT_NB_UES=`echo $UES | sed -e "s#^0*##"` + echo "############################################################" + echo "${CN_CONFIG} : Adding ${INT_NB_UES} UE(s) to conf file and recompile" + echo "############################################################" + add_ue_l2_sim_ue $UE_VM_CMDS $UE_VM_IP_ADDR $INT_NB_UES - echo "############################################################" - echo "Starting the eNB in FDD-5MHz mode" - echo "############################################################" - CURRENT_ENB_LOG_FILE=fdd_05MHz_01users_wS1_enb.log - start_l2_sim_enb $ENB_VM_CMDS $ENB_VM_IP_ADDR $EPC_VM_IP_ADDR $UE_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 25 rcc.band7.tm1.nfapi.conf 1 + echo "############################################################" + echo "${CN_CONFIG} : Starting the eNB in ${TMODE}-${BW}MHz mode" + echo "############################################################" + CURRENT_ENB_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_enb.log + start_l2_sim_enb $ENB_VM_CMDS $ENB_VM_IP_ADDR $EPC_VM_IP_ADDR $UE_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 25 rcc.band7.tm1.nfapi.conf $S1_NOS1_CFG - echo "############################################################" - echo "Starting the UE (1 user)" - echo "############################################################" - CURRENT_UE_LOG_FILE=fdd_05MHz_01users_wS1_ue.log - start_l2_sim_ue $UE_VM_CMDS $UE_VM_IP_ADDR $ENB_VM_IP_ADDR $CURRENT_UE_LOG_FILE ue.nfapi.conf 1 1 - if [ $UE_SYNC -eq 0 ] - then - echo "Problem w/ eNB and UE not syncing" - terminate_enb_ue_basic_sim $ENB_VM_CMDS $ENB_VM_IP_ADDR 1 - terminate_enb_ue_basic_sim $UE_VM_CMDS $UE_VM_IP_ADDR 2 - scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC - scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC - terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR - echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log - STATUS=-1 - return - fi + echo "############################################################" + echo "${CN_CONFIG} : Starting the UE for ${INT_NB_UES} user(s)" + echo "############################################################" + CURRENT_UE_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_ue.log + start_l2_sim_ue $UE_VM_CMDS $UE_VM_IP_ADDR $ENB_VM_IP_ADDR $CURRENT_UE_LOG_FILE ue.nfapi.conf $INT_NB_UES $S1_NOS1_CFG + if [ $UE_SYNC -eq 0 ] + then + echo "Problem w/ eNB and UE not syncing" + terminate_enb_ue_basic_sim $ENB_VM_CMDS $ENB_VM_IP_ADDR 1 + terminate_enb_ue_basic_sim $UE_VM_CMDS $UE_VM_IP_ADDR 2 + scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC + scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC + if [ $S1_NOS1_CFG -eq 1 ] + then + terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR + fi + full_l2_sim_destroy + echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log + STATUS=-1 + return + fi - echo "############################################################" - echo "Pinging the EPC from UE" - echo "############################################################" - PING_LOG_FILE=fdd_05MHz_01users_wS1_ping_epc.txt - ping_epc_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR $REAL_EPC_IP_ADDR $PING_LOG_FILE - scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC - check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20 + if [ $S1_NOS1_CFG -eq 1 ] + then + get_ue_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR - echo "############################################################" - echo "Pinging the UE from EPC" - echo "############################################################" - PING_LOG_FILE=fdd_05MHz_01users_wS1_ping_ue.txt - get_ue_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR - ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE - scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC - check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20 + echo "############################################################" + echo "${CN_CONFIG} : Pinging the EPC from UE" + echo "############################################################" + PING_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_ping_epc.log + ping_epc_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR $REAL_EPC_IP_ADDR $PING_LOG_FILE + scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC + else + get_ue_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR + get_enb_noS1_ip_addr $ENB_VM_CMDS $ENB_VM_IP_ADDR - echo "############################################################" - echo "Terminate enb/ue simulators" - echo "############################################################" - terminate_enb_ue_basic_sim $ENB_VM_CMDS $ENB_VM_IP_ADDR 1 - terminate_enb_ue_basic_sim $UE_VM_CMDS $UE_VM_IP_ADDR 2 - scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC - scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC + echo "############################################################" + echo "${CN_CONFIG} : Pinging the eNB from UE" + echo "############################################################" + PING_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_ping_enb.log + ping_epc_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR $ENB_IP_ADDR $PING_LOG_FILE + scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC + fi + check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20 - echo "############################################################" - echo "Adding UE to conf file and recompile" - echo "############################################################" - add_ue_l2_sim_ue $UE_VM_CMDS $UE_VM_IP_ADDR 4 + if [ $S1_NOS1_CFG -eq 1 ] + then + echo "############################################################" + echo "${CN_CONFIG} : Pinging the UE from EPC" + echo "############################################################" + PING_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_ping_ue.log + ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE + scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC + else + echo "############################################################" + echo "${CN_CONFIG} : Pinging the UE from eNB" + echo "############################################################" + PING_LOG_FILE=${TMODE}_${BW}MHz_${UES}users_${CN_CONFIG}_ping_ue.log + ping_enb_ip_addr $ENB_VM_CMDS $ENB_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE + scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC + fi + check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20 - echo "############################################################" - echo "Starting the eNB in FDD-5MHz mode" - echo "############################################################" - CURRENT_ENB_LOG_FILE=fdd_05MHz_04users_wS1_enb.log - start_l2_sim_enb $ENB_VM_CMDS $ENB_VM_IP_ADDR $EPC_VM_IP_ADDR $UE_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 25 rcc.band7.tm1.nfapi.conf 1 + echo "############################################################" + echo "${CN_CONFIG} : Terminate enb/ue simulators" + echo "############################################################" + terminate_enb_ue_basic_sim $ENB_VM_CMDS $ENB_VM_IP_ADDR 1 + terminate_enb_ue_basic_sim $UE_VM_CMDS $UE_VM_IP_ADDR 2 + scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC + scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC - echo "############################################################" - echo "Starting the UE (4 users)" - echo "############################################################" - CURRENT_UE_LOG_FILE=fdd_05MHz_04users_wS1_ue.log - start_l2_sim_ue $UE_VM_CMDS $UE_VM_IP_ADDR $ENB_VM_IP_ADDR $CURRENT_UE_LOG_FILE ue.nfapi.conf 4 1 - if [ $UE_SYNC -eq 0 ] - then - echo "Problem w/ eNB and UE not syncing" - terminate_enb_ue_basic_sim $ENB_VM_CMDS $ENB_VM_IP_ADDR 1 - terminate_enb_ue_basic_sim $UE_VM_CMDS $UE_VM_IP_ADDR 2 - scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC - scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC - terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR - echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log - STATUS=-1 - return - fi + done + done + done + done - echo "############################################################" - echo "Pinging the EPC from UE" - echo "############################################################" - PING_LOG_FILE=fdd_05MHz_04users_wS1_ping_epc.txt - ping_epc_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR $REAL_EPC_IP_ADDR $PING_LOG_FILE - scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC - check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20 - - echo "############################################################" - echo "Pinging the UE from EPC" - echo "############################################################" - PING_LOG_FILE=fdd_05MHz_04users_wS1_ping_ue.txt - ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE - scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC - check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20 - - echo "############################################################" - echo "Terminate enb/ue simulators" - echo "############################################################" - terminate_enb_ue_basic_sim $ENB_VM_CMDS $ENB_VM_IP_ADDR 1 - terminate_enb_ue_basic_sim $UE_VM_CMDS $UE_VM_IP_ADDR 2 - scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC - scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC - - echo "############################################################" - echo "Terminate EPC" - echo "############################################################" - terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR - - echo "############################################################" - echo "Running now in a no-S1 configuration" - echo "############################################################" - add_ue_l2_sim_ue $UE_VM_CMDS $UE_VM_IP_ADDR 1 - - echo "############################################################" - echo "noS1 : Starting the eNB in FDD-5MHz mode" - echo "############################################################" - CURRENT_ENB_LOG_FILE=fdd_05MHz_01users_noS1_enb.log - start_l2_sim_enb $ENB_VM_CMDS $ENB_VM_IP_ADDR $EPC_VM_IP_ADDR $UE_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 25 rcc.band7.tm1.nfapi.conf 0 - - echo "############################################################" - echo "noS1 : Starting the UE (1 user)" - echo "############################################################" - CURRENT_UE_LOG_FILE=fdd_05MHz_01users_noS1_ue.log - start_l2_sim_ue $UE_VM_CMDS $UE_VM_IP_ADDR $ENB_VM_IP_ADDR $CURRENT_UE_LOG_FILE ue.nfapi.conf 1 0 - if [ $UE_SYNC -eq 0 ] - then - echo "Problem w/ eNB and UE not syncing" - terminate_enb_ue_basic_sim $ENB_VM_CMDS $ENB_VM_IP_ADDR 1 - terminate_enb_ue_basic_sim $UE_VM_CMDS $UE_VM_IP_ADDR 2 - scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC - scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC - echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log - STATUS=-1 - return - fi - - get_ue_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR - get_enb_noS1_ip_addr $ENB_VM_CMDS $ENB_VM_IP_ADDR - - echo "############################################################" - echo "noS1 : Pinging the eNB from UE" - echo "############################################################" - PING_LOG_FILE=fdd_05MHz_01users_noS1_ping_enb.txt - ping_epc_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR $ENB_IP_ADDR $PING_LOG_FILE - scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC - check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20 - - echo "############################################################" - echo "noS1 : Pinging the UE from eNB" - echo "############################################################" - PING_LOG_FILE=fdd_05MHz_01users_noS1_ping_ue.txt - ping_enb_ip_addr $ENB_VM_CMDS $ENB_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE - scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC - check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20 - - echo "############################################################" - echo "noS1: Terminate enb/ue simulators" - echo "############################################################" - terminate_enb_ue_basic_sim $ENB_VM_CMDS $ENB_VM_IP_ADDR 1 - terminate_enb_ue_basic_sim $UE_VM_CMDS $UE_VM_IP_ADDR 2 - scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC - scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC - - echo "############################################################" - echo "Adding UE to conf file and recompile" - echo "############################################################" - add_ue_l2_sim_ue $UE_VM_CMDS $UE_VM_IP_ADDR 4 - - echo "############################################################" - echo "noS1 : Starting the eNB in FDD-5MHz mode" - echo "############################################################" - CURRENT_ENB_LOG_FILE=fdd_05MHz_04users_noS1_enb.log - start_l2_sim_enb $ENB_VM_CMDS $ENB_VM_IP_ADDR $EPC_VM_IP_ADDR $UE_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 25 rcc.band7.tm1.nfapi.conf 0 - - echo "############################################################" - echo "noS1 : Starting the UE (4 users)" - echo "############################################################" - CURRENT_UE_LOG_FILE=fdd_05MHz_04users_noS1_ue.log - start_l2_sim_ue $UE_VM_CMDS $UE_VM_IP_ADDR $ENB_VM_IP_ADDR $CURRENT_UE_LOG_FILE ue.nfapi.conf 1 0 - if [ $UE_SYNC -eq 0 ] - then - echo "Problem w/ eNB and UE not syncing" - terminate_enb_ue_basic_sim $ENB_VM_CMDS $ENB_VM_IP_ADDR 1 - terminate_enb_ue_basic_sim $UE_VM_CMDS $UE_VM_IP_ADDR 2 - scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC - scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC - echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log - STATUS=-1 - return - fi - - get_ue_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR - get_enb_noS1_ip_addr $ENB_VM_CMDS $ENB_VM_IP_ADDR - - echo "############################################################" - echo "noS1 : Pinging the eNB from UE" - echo "############################################################" - PING_LOG_FILE=fdd_05MHz_04users_noS1_ping_enb.txt - ping_epc_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR $ENB_IP_ADDR $PING_LOG_FILE - scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC - check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20 - - echo "############################################################" - echo "noS1 : Pinging the UE from eNB" - echo "############################################################" - PING_LOG_FILE=fdd_05MHz_04users_noS1_ping_ue.txt - ping_enb_ip_addr $ENB_VM_CMDS $ENB_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE - scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC - check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20 - - echo "############################################################" - echo "noS1: Terminate enb/ue simulators" - echo "############################################################" - terminate_enb_ue_basic_sim $ENB_VM_CMDS $ENB_VM_IP_ADDR 1 - terminate_enb_ue_basic_sim $UE_VM_CMDS $UE_VM_IP_ADDR 2 - scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC - scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC - - if [ $KEEP_VM_ALIVE -eq 0 ] - then - echo "############################################################" - echo "Destroying VMs" - echo "############################################################" - uvt-kvm destroy $ENB_VM_NAME - ssh-keygen -R $ENB_VM_IP_ADDR - uvt-kvm destroy $UE_VM_NAME - ssh-keygen -R $UE_VM_IP_ADDR - uvt-kvm destroy $EPC_VM_NAME - ssh-keygen -R $EPC_VM_IP_ADDR - fi + full_l2_sim_destroy echo "############################################################" echo "Checking run status"