re-organize cmake directory, add autotests replacing the python ones: compilation only for now

git-svn-id: http://svn.eurecom.fr/openair4G/trunk@6768 818b1a75-f10b-46b9-bf7c-635c3b92a50f

cmake_targets/tools/Kbuild.cmake

@@ -0,0 +1,4 @@
+src=${dir}
+obj-m += ${name}.o
+${name}-y += ${objs}
+ccflags-y += ${module_cc_opt}

cmake_targets/tools/generate_asn1.bash

@@ -0,0 +1,28 @@
+
+mkdir -p $1
+cd $1
+shift
+
+asn1c -gen-PER -fcompound-names  $* 2>&1 | grep -v -- '->' | grep -v '^Compiled' |grep -v sample
+
+awk ' 
+  BEGIN { 
+     print "#ifndef __ASN1_CONSTANTS_H__"
+     print "#define __ASN1_CONSTANTS_H__"
+  }  
+  /INTEGER ::=/ { 
+     gsub("INTEGER ::=","")
+     gsub("--","//")
+     gsub("-1","_minus_1")
+     gsub("-","_")
+     printf("#define %s\n",$0)
+  } 
+  /::=.*INTEGER.*[(]/ {
+     nb_fields=split($0,val,"[:=().]+");
+     gsub("-","_",val[1]);
+     printf("#define min_val_%s %s\n",val[1],val[nb_fields-2]);
+     printf("#define max_val_%s %s\n",val[1],val[nb_fields-1]);
+  }
+  END {
+     print "#endif ";
+  } ' $1  > asn1_constants.h

cmake_targets/tools/init_exmimo2.sh

@@ -0,0 +1,57 @@
+#!/bin/bash
+
+PCI=`lspci -m | grep Xilinx`
+if [ -z "$PCI" ]; then
+ echo "No card found. Stopping!"
+ return
+fi
+
+## This part corrects the wrong configuration of the endpoint done by the bios in some machines
+echo "$PCI" | while read config_reg; do
+SLOT_NUMBER=`echo $config_reg | awk -F\" '{print $1}'`
+sudo setpci -s $SLOT_NUMBER 60.b=10
+done
+
+load_module() {
+  mod_name=${1##*/}
+  mod_name=${mod_name%.*}
+  if awk "/$mod_name/ {found=1 ;exit} END {if (found!=1) exit 1}" /proc/modules
+    then
+      echo "module $mod_name already loaded: I remove it first"
+      sudo rmmod $mod_name
+  fi
+  echo loading $mod_name
+  sudo insmod $1
+}
+
+load_module $OPENAIR_DIR/cmake_targets/bin/openair_rf.ko
+sleep 1
+
+if [ ! -e /dev/openair0 ]; then 
+ sudo mknod /dev/openair0 c 127 0
+ sudo chmod a+rw /dev/openair0
+fi
+
+DEVICE=`echo $PCI | awk -F\" '{print $(NF-1)}' | awk '{print $2}'`
+DEVICE_SWID=${DEVICE:2:2}
+if [ $DEVICE_SWID == '0a' ]; then
+   echo "Using firware version 10"
+   $OPENAIR_DIR/cmake_targets/bin/updatefw -s 0x43fffff0 -b -f $OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/sdr_expressmimo2_v10
+else
+   echo 'No corresponding firmware found'
+   return
+fi
+
+load_module $OPENAIR_DIR/cmake_targets/bin/nasmesh.ko
+
+if [ "$1" = "eNB" ]; then 
+     echo "bring up oai0 interface for enb"
+     sudo ifconfig oai0 10.0.1.1 netmask 255.255.255.0 broadcast 10.0.1.255
+    $OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -s 10.0.1.1 -t 10.0.1.9 -r 1
+else
+    if [ "$1" = "UE" ]; then 
+	echo "bring up oai0 interface for UE"
+	sudo ifconfig oai0 10.0.1.9 netmask 255.255.255.0 broadcast 10.0.1.255
+	$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -s 10.0.1.9 -t 10.0.1.1 -r 1
+    fi
+fi