diff --git a/cmake_targets/CMakeLists.txt b/cmake_targets/CMakeLists.txt index a74a4d9b6c..5e86d59378 100644 --- a/cmake_targets/CMakeLists.txt +++ b/cmake_targets/CMakeLists.txt @@ -548,7 +548,7 @@ elseif (${RF_BOARD} STREQUAL "OAI_USRP") set(HW_SOURCE ${HW_SOURCE} ${OPENAIR_TARGETS}/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp) LINK_DIRECTORIES("/opt/lib") - set(option_HW_lib "-luhd -rdynamic -ldl") + set(option_HW_lib "-luhd -rdynamic -ldl -lboost_system") elseif (${RF_BOARD} STREQUAL "OAI_BLADERF") include_directories("${OPENAIR_TARGETS}/ARCH/BLADERF/USERSPACE/LIB/") @@ -1636,7 +1636,6 @@ target_link_libraries (lte-softmodem -ldl target_link_libraries (lte-softmodem ${LIBXML2_LIBRARIES}) target_link_libraries (lte-softmodem pthread m ${CONFIG_LIBRARIES} rt crypt ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} sctp ${option_HW_lib} ${option_TP_lib} ${XFORMS_LIBRARIES} ) -target_link_libraries (lte-softmodem ${LIBBOOST_LIBRARIES} -lboost_system) #Added manually as it is not found for some reason for USRP target_link_libraries (lte-softmodem ${LIB_LMS_LIBRARIES}) target_link_libraries (lte-softmodem ${T_LIB}) @@ -1671,7 +1670,6 @@ target_link_libraries (lte-softmodem-nos1 target_link_libraries (lte-softmodem-nos1 ${LIBXML2_LIBRARIES}) target_link_libraries (lte-softmodem-nos1 pthread m ${CONFIG_LIBRARIES} rt crypt ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} ${option_HW_lib} ${option_TP_lib} ${XFORMS_LIBRARIES} ) -target_link_libraries (lte-softmodem-nos1 ${LIBBOOST_LIBRARIES} -lboost_system) #Added manually as it is not found for some reason for USRP target_link_libraries (lte-softmodem-nos1 ${LIB_LMS_LIBRARIES}) target_link_libraries (lte-softmodem-nos1 ${T_LIB}) @@ -1694,7 +1692,7 @@ target_link_libraries(rrh_gw UTIL LFDS -Wl,--end-group ) target_link_libraries (rrh_gw rt pthread m ) -target_link_libraries (rrh_gw ${option_HW_lib} ${option_TP_lib} ${LIBBOOST_LIBRARIES} -lboost_system ) #Added manually as it is not found for some reason for USRP +target_link_libraries (rrh_gw ${option_HW_lib} ${option_TP_lib}) target_link_libraries (rrh_gw ${LIB_LMS_LIBRARIES}) target_link_libraries (rrh_gw ${T_LIB}) diff --git a/cmake_targets/autotests/README.txt b/cmake_targets/autotests/README.txt index 245b235ebf..f4e50a7e51 100644 --- a/cmake_targets/autotests/README.txt +++ b/cmake_targets/autotests/README.txt @@ -104,25 +104,31 @@ Obj.# Case# Test# Description 01 51 06 mbmssim (TBD) -01 55 lte-softmodem tests with USRP B210 RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX, 2TX/2RX +01 55 lte-softmodem tests with USRP B210 RF as eNB and ALU EPC w/ Bandrich COTS UE for 1TX/1RX (TM1), 2TX/2RX (TM2) 01 55 00 Band 7 FDD 5MHz UL Throughput (UDP) for 300 sec for 1TX/1RX 01 55 01 Band 7 FDD 10MHz UL Throughput (UDP) for 300 sec for 1TX/1RX 01 55 02 Band 7 FDD 20MHz UL Throughput (UDP) for 300 sec for 1TX/1RX 01 55 03 Band 7 FDD 5MHz DL Throughput (UDP) for 300 sec for 1TX/1RX 01 55 04 Band 7 FDD 10MHz DL Throughput (UDP) for 300 sec for 1TX/1RX 01 55 05 Band 7 FDD 20MHz DL Throughput (UDP) for 300 sec for 1TX/1RX -01 55 06 Band 7 FDD 5MHz UL Throughput (UDP) for 300 sec for 2TX/2RX -01 55 07 Band 7 FDD 10MHz UL Throughput (UDP) for 300 sec for 2TX/2RX -01 55 08 Band 7 FDD 20MHz UL Throughput (UDP) for 300 sec for 2TX/2RX -01 55 09 Band 7 FDD 5MHz DL Throughput (UDP) for 300 sec for 2TX/2RX -01 55 10 Band 7 FDD 10MHz DL Throughput (UDP) for 300 sec for 2TX/2RX -01 55 11 Band 7 FDD 20MHz DL Throughput (UDP) for 300 sec for 2TX/2RX +01 55 06 Band 7 FDD 5MHz UL Throughput (UDP) for 300 sec for 2TX/2RX (TM2) +01 55 07 Band 7 FDD 10MHz UL Throughput (UDP) for 300 sec for 2TX/2RX (TM2) +01 55 08 Band 7 FDD 20MHz UL Throughput (UDP) for 300 sec for 2TX/2RX (TM2) +01 55 09 Band 7 FDD 5MHz DL Throughput (UDP) for 300 sec for 2TX/2RX (TM2) +01 55 10 Band 7 FDD 10MHz DL Throughput (UDP) for 300 sec for 2TX/2RX (TM2) +01 55 11 Band 7 FDD 20MHz DL Throughput (UDP) for 300 sec for 2TX/2RX (TM2) 01 55 12 Band 7 FDD 5MHz UL Throughput (TCP) for 300 sec for 1TX/1RX 01 55 13 Band 7 FDD 10MHz UL Throughput (TCP) for 300 sec for 1TX/1RX 01 55 14 Band 7 FDD 20MHz UL Throughput (TCP) for 300 sec for 1TX/1RX 01 55 15 Band 7 FDD 5MHz DL Throughput (TCP) for 300 sec for 1TX/1RX 01 55 16 Band 7 FDD 10MHz DL Throughput (TCP) for 300 sec for 1TX/1RX 01 55 17 Band 7 FDD 20MHz DL Throughput (TCP) for 300 sec for 1TX/1RX +01 55 18 Band 7 FDD 5MHz UL Throughput (TCP) for 300 sec for 2TX/2RX (TM2) +01 55 19 Band 7 FDD 10MHz UL Throughput (TCP) for 300 sec for 2TX/2RX (TM2) +01 55 20 Band 7 FDD 20MHz UL Throughput (TCP) for 300 sec for 2TX/2RX (TM2) +01 55 21 Band 7 FDD 5MHz DL Throughput (TCP) for 300 sec for 2TX/2RX (TM2) +01 55 22 Band 7 FDD 10MHz DL Throughput (TCP) for 300 sec for 2TX/2RX (TM2) +01 55 23 Band 7 FDD 20MHz DL Throughput (TCP) for 300 sec for 2TX/2RX (TM2) 01 56 lte-softmodem tests with USRP B210 RF as eNB and OAI EPC (eNB and EPC are on same machines) w/ Bandrich COTS UE 01 56 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX @@ -140,7 +146,7 @@ Obj.# Case# Test# Description 01 57 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX 01 57 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX -01 58 lte-softmodem tests with USRP X310 RF as eNB and ALU EPC w/ Bandrich COTS UE for `TX/1RX, 2TX/2RX +01 58 lte-softmodem tests with USRP X310 RF as eNB and ALU EPC w/ Bandrich COTS UE for 1TX/1RX (TM1), 2TX/2RX(TM2) 01 58 00 Band 7 FDD 5MHz UL Throughput (UDP) for 300 sec for 1TX/1RX 01 58 01 Band 7 FDD 10MHz UL Throughput (UDP) for 300 sec for 1TX/1RX 01 58 02 Band 7 FDD 20MHz UL Throughput (UDP) for 300 sec for 1TX/1RX @@ -153,6 +159,18 @@ Obj.# Case# Test# Description 01 58 09 Band 7 FDD 5MHz DL Throughput (TCP) for 300 sec for 1TX/1RX 01 58 10 Band 7 FDD 10MHz DL Throughput (TCP) for 300 sec for 1TX/1RX 01 58 11 Band 7 FDD 20MHz DL Throughput (TCP) for 300 sec for 1TX/1RX +01 58 12 Band 7 FDD 5MHz UL Throughput (UDP) for 300 sec for 2TX/2RX (TM2) +01 58 13 Band 7 FDD 10MHz UL Throughput (UDP) for 300 sec for 2TX/2RX (TM2) +01 58 14 Band 7 FDD 20MHz UL Throughput (UDP) for 300 sec for 2TX/2RX (TM2) +01 58 15 Band 7 FDD 5MHz DL Throughput (UDP) for 300 sec for 2TX/2RX (TM2) +01 58 16 Band 7 FDD 10MHz DL Throughput (UDP) for 300 sec for 2TX/2RX (TM2) +01 58 17 Band 7 FDD 20MHz DL Throughput (UDP) for 300 sec for 2TX/2RX (TM2) +01 58 18 Band 7 FDD 5MHz UL Throughput (TCP) for 300 sec for 2TX/2RX (TM2) +01 58 19 Band 7 FDD 10MHz UL Throughput (TCP) for 300 sec for 2TX/2RX (TM2) +01 58 20 Band 7 FDD 20MHz UL Throughput (TCP) for 300 sec for 2TX/2RX (TM2) +01 58 21 Band 7 FDD 5MHz DL Throughput (TCP) for 300 sec for 2TX/2RX (TM2) +01 58 22 Band 7 FDD 10MHz DL Throughput (TCP) for 300 sec for 2TX/2RX (TM2) +01 58 23 Band 7 FDD 20MHz DL Throughput (TCP) for 300 sec for 2TX/2RX (TM2) 01 59 lte-softmodem tests with USRP X310 RF as eNB and OAI EPC (eNB and EPC are on same machines) w/ Bandrich COTS UE @@ -165,7 +183,7 @@ Obj.# Case# Test# Description 01 60 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX 01 60 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX -01 61 lte-softmodem tests with EXMIMO RF as eNB and ALU EPC w/ Bandrich COTS UE for `TX/1RX, 2TX/2RX +01 61 lte-softmodem tests with EXMIMO RF as eNB and ALU EPC w/ Bandrich COTS UE for 1TX/1RX, 2TX/2RX 01 61 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX 01 61 01 Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX 01 61 02 Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX @@ -183,7 +201,7 @@ Obj.# Case# Test# Description 01 63 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX 01 63 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX -01 65 00 lte-softmodem tests with BladeRF RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX +01 65 00 lte-softmodem tests with BladeRF RF as eNB and ALU EPC w/ Bandrich COTS UE for 1TX/1RX 01 65 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX 01 65 01 Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX 01 65 02 Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX @@ -225,7 +243,7 @@ Obj.# Case# Test# Description 01 85 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX 01 85 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX -02 55 lte-softmodem tests with USRP B210 RF as eNB and ALU EPC w/ Sony Experia M4 COTS UE for TX/1RX +02 55 lte-softmodem tests with USRP B210 RF as eNB and ALU EPC w/ Sony Experia M4 COTS UE for 1TX/1RX and 2TX/2RX (TM2) 02 55 00 Band 7 FDD 5MHz UL Throughput (UDP) for 300 sec for 1TX/1RX 02 55 01 Band 7 FDD 10MHz UL Throughput (UDP) for 300 sec for 1TX/1RX 02 55 02 Band 7 FDD 20MHz UL Throughput (UDP) for 300 sec for 1TX/1RX @@ -238,7 +256,18 @@ Obj.# Case# Test# Description 02 55 09 Band 7 FDD 5MHz DL Throughput (TCP) for 300 sec for 1TX/1RX 02 55 10 Band 7 FDD 10MHz DL Throughput (TCP) for 300 sec for 1TX/1RX 02 55 11 Band 7 FDD 20MHz DL Throughput (TCP) for 300 sec for 1TX/1RX - +02 55 12 Band 7 FDD 5MHz UL Throughput (UDP) for 300 sec for 2TX/2RX (TM2) +02 55 13 Band 7 FDD 10MHz UL Throughput (UDP) for 300 sec for 2TX/2RX (TM2) +02 55 14 Band 7 FDD 20MHz UL Throughput (UDP) for 300 sec for 2TX/2RX (TM2) +02 55 15 Band 7 FDD 5MHz DL Throughput (UDP) for 300 sec for 2TX/2RX (TM2) +02 55 16 Band 7 FDD 10MHz DL Throughput (UDP) for 300 sec for 2TX/2RX (TM2) +02 55 17 Band 7 FDD 20MHz DL Throughput (UDP) for 300 sec for 2TX/2RX (TM2) +02 55 18 Band 7 FDD 5MHz UL Throughput (TCP) for 300 sec for 2TX/2RX (TM2) +02 55 19 Band 7 FDD 10MHz UL Throughput (TCP) for 300 sec for 2TX/2RX (TM2) +02 55 20 Band 7 FDD 20MHz UL Throughput (TCP) for 300 sec for 2TX/2RX (TM2) +02 55 21 Band 7 FDD 5MHz DL Throughput (TCP) for 300 sec for 2TX/2RX (TM2) +02 55 22 Band 7 FDD 10MHz DL Throughput (TCP) for 300 sec for 2TX/2RX (TM2) +02 55 23 Band 7 FDD 20MHz DL Throughput (TCP) for 300 sec for 2TX/2RX (TM2) 01 64 lte-softmodem-noS1 tests diff --git a/cmake_targets/autotests/test_case_list.xml b/cmake_targets/autotests/test_case_list.xml index 01b6eb8c99..947763e803 100644 --- a/cmake_targets/autotests/test_case_list.xml +++ b/cmake_targets/autotests/test_case_list.xml @@ -11,7 +11,7 @@ sudo -S -E /opt/ltebox/tools/stop_ltebox exmimo_pci=`lspci -m | grep Xilinx`; if [ -n "$exmimo_pci" ] ; then $OPENAIR_DIR/cmake_targets/build_oai -w EXMIMO -c; sudo -S -E $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2; fi; sudo -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_huaweiE398_ue.py --reset-ue; sudo -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue; uname -a; sudo -E dmesg 36000 - 010141 0102+ 010304 010305 0104+ 015502 015505 015508 015511 015514 015517 015602 015605 015702 015705 015802 015805 015808 015811 016102 016105 016502 016505 017002 017005 017502 017505 018002 018005 018502 018505 025502 025505 025508 025511 + 010141 0102+ 010304 010305 0104+ 015502 015505 015508 015511 015514 015517 015518 015519 015520 015521 015522 015523 015602 015605 015702 015705 015802 015805 015808 015811 015814 015817 015818 015819 015820 015821 015822 015823 016102 016105 016502 016505 017002 017005 017502 017505 018002 018005 018502 018505 025502 025505 025508 025511 025514 025517 025518 025519 025520 025521 025522 025523 3 mozart hutch starsky stevens amerique calisson @@ -1176,6 +1176,7 @@ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -32 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" @@ -1397,6 +1398,7 @@ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -32 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" @@ -1460,29 +1462,31 @@ amerique 390 /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf mobile_network_code \"92\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf downlink_frequency 2660000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf nb_antennas_rx 2 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf nb_antennas_tx 2 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\ - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.19/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf ENB_PORT_FOR_S1U 2152 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf N_RB_DL 25 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antenna_ports 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_tx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ue_TransmissionMode 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\ + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.19/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_PORT_FOR_S1U 2152 $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf @@ -1522,7 +1526,7 @@ throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec False - USRPb210.ALU_EPC.Bandrich.5MHz.FDD.UDP.Band_7.UL.2TX.2RX + USRPb210.ALU_EPC.Bandrich.5MHz.FDD.UDP.Band_7.UL.2TX.2RX.TM2 10 @@ -1535,29 +1539,31 @@ amerique 390 /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf mobile_network_code \"92\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf N_RB_DL 50 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf downlink_frequency 2660000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf nb_antennas_rx 2 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf nb_antennas_tx 2 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.19/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf ENB_PORT_FOR_S1U 2152 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf N_RB_DL 50 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antenna_ports 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_tx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ue_TransmissionMode 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\ + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.19/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_PORT_FOR_S1U 2152 $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf @@ -1596,7 +1602,7 @@ throughput_test min=0.0Mbits/sec max=2.0Mbits/sec average=2.0Mbits/sec False - USRPb210.ALU_EPC.Bandrich.10MHz.FDD.UDP.Band_7.UL.2TX.2RX + USRPb210.ALU_EPC.Bandrich.10MHz.FDD.UDP.Band_7.UL.2TX.2RX.TM2 10 @@ -1608,29 +1614,32 @@ amerique 390 /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf mobile_network_code \"92\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf N_RB_DL 100 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf downlink_frequency 2660000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf nb_antennas_rx 2 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf nb_antennas_tx 2 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.19/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf ENB_PORT_FOR_S1U 2152 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf N_RB_DL 100 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf pdsch_referenceSignalPower -32 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antenna_ports 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_tx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ue_TransmissionMode 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\ + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.19/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_PORT_FOR_S1U 2152 $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -E -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf @@ -1670,7 +1679,7 @@ throughput_test min=0.0Mbits/sec max=4.0Mbits/sec average=4.0Mbits/sec False - USRPb210.ALU_EPC.Bandrich.20MHz.FDD.UDP.Band_7.UL.2TX.2RX + USRPb210.ALU_EPC.Bandrich.20MHz.FDD.UDP.Band_7.UL.2TX.2RX.TM2 10 @@ -1682,29 +1691,31 @@ amerique 390 /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf mobile_network_code \"92\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf downlink_frequency 2660000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf nb_antennas_rx 2 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf nb_antennas_tx 2 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.19/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf ENB_PORT_FOR_S1U 2152 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf N_RB_DL 25 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antenna_ports 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_tx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ue_TransmissionMode 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\ + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.19/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_PORT_FOR_S1U 2152 $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf @@ -1744,7 +1755,7 @@ False - USRPb210.ALU_EPC.Bandrich.5MHz.FDD.UDP.Band_7.DL.2TX.2RX + USRPb210.ALU_EPC.Bandrich.5MHz.FDD.UDP.Band_7.DL.2TX.2RX.TM2 10 @@ -1756,29 +1767,31 @@ amerique 390 /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf mobile_network_code \"92\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf N_RB_DL 50 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf downlink_frequency 2660000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf nb_antennas_rx 2 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf nb_antennas_tx 2 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.19/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf ENB_PORT_FOR_S1U 2152 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf N_RB_DL 50 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antenna_ports 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_tx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ue_TransmissionMode 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\ + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.19/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_PORT_FOR_S1U 2152 $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf @@ -1818,7 +1831,7 @@ False - USRPb210.ALU_EPC.Bandrich.10MHz.FDD.UDP.Band_7.DL.2TX.2RX + USRPb210.ALU_EPC.Bandrich.10MHz.FDD.UDP.Band_7.DL.2TX.2RX.TM2 10 @@ -1830,29 +1843,32 @@ amerique 390 /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf mobile_network_code \"92\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf N_RB_DL 100 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf downlink_frequency 2660000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf nb_antennas_rx 2 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf nb_antennas_tx 2 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.19/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf ENB_PORT_FOR_S1U 2152 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf N_RB_DL 100 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf pdsch_referenceSignalPower -32 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antenna_ports 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_tx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ue_TransmissionMode 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\ + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.19/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_PORT_FOR_S1U 2152 $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -E -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf @@ -1888,11 +1904,11 @@ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 - $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -u -c 192.172.0.2 -b 10Mbits/s + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -u -c 192.172.0.2 -b 33Mbits/s False - USRPb210.ALU_EPC.Bandrich.20MHz.FDD.UDP.Band_7.DL.2TX.2RX + USRPb210.ALU_EPC.Bandrich.20MHz.FDD.UDP.Band_7.DL.2TX.2RX.TM2 10 @@ -2066,6 +2082,7 @@ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -32 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" @@ -2287,6 +2304,7 @@ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -32 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" @@ -2342,6 +2360,469 @@ + + + + lte-softmodem + + hutch + stevens + amerique + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf N_RB_DL 25 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antenna_ports 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_tx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ue_TransmissionMode 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\ + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.19/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf + + + + + False + + /tmp + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue;$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -c 192.172.0.1 + + + + False + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue + + /tmp + + + + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -f m + + throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec + + False + USRPb210.ALU_EPC.Bandrich.5MHz.FDD.TCP.Band_7.UL.2TX.2RX.TM2 + 10 + + + + + lte-softmodem + + hutch + stevens + amerique + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf N_RB_DL 50 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antenna_ports 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_tx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ue_TransmissionMode 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\ + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.19/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf + + + + + False + + /tmp + > + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue;$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -c 192.172.0.1 + + + + False + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue + + /tmp + + + + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -f m + + throughput_test min=0.0Mbits/sec max=2.0Mbits/sec average=2.0Mbits/sec + + False + USRPb210.ALU_EPC.Bandrich.10MHz.FDD.TCP.Band_7.UL.2TX.2RX.TM2 + 10 + + + + lte-softmodem + + hutch + stevens + amerique + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf N_RB_DL 100 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf pdsch_referenceSignalPower -32 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antenna_ports 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_tx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ue_TransmissionMode 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\ + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.19/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf + + + + + False + + /tmp + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -c 192.172.0.1 + + + + False + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue + + /tmp + + + + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -f m + + throughput_test min=0.0Mbits/sec max=4.0Mbits/sec average=4.0Mbits/sec + + False + USRPb210.ALU_EPC.Bandrich.20MHz.FDD.TCP.Band_7.UL.2TX.2RX.TM2 + 10 + + + + lte-softmodem + + hutch + stevens + amerique + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf N_RB_DL 25 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antenna_ports 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_tx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ue_TransmissionMode 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\ + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.19/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf + + + + + False + + /tmp + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -f m -B 192.172.0.2 + + throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec + + False + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue + + + /tmp + + + + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -u -c 192.172.0.2 + + + False + USRPb210.ALU_EPC.Bandrich.5MHz.FDD.TCP.Band_7.DL.2TX.2RX.TM2 + 10 + + + + lte-softmodem + + hutch + stevens + amerique + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf N_RB_DL 50 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antenna_ports 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_tx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ue_TransmissionMode 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\ + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.19/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf + + + + + False + + /tmp + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -f m + + throughput_test min=0.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec + + False + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue + + + /tmp + + + + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -c 192.172.0.2 -b 33Mbits/s -i 1 -f m + + + False + USRPb210.ALU_EPC.Bandrich.10MHz.FDD.TCP.Band_7.DL.2TX.2RX.TM2 + 10 + + + + lte-softmodem + + hutch + stevens + amerique + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf N_RB_DL 100 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf pdsch_referenceSignalPower -32 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antenna_ports 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_tx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ue_TransmissionMode 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\ + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.19/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf + + + + + False + + /tmp + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -f m + + throughput_test min=0.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec + + False + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue + + + /tmp + + + + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -c 192.172.0.2 -b 33Mbits/s + + + False + USRPb210.ALU_EPC.Bandrich.20MHz.FDD.TCP.Band_7.DL.2TX.2RX.TM2 + 10 + + + + + lte-softmodem @@ -3300,7 +3781,6 @@ c sudo mkdir -p /usr/local/etc/oai/freeDiamter; sudo cp -vf $OPENAIRCN_DIR/ETC/hss.conf /usr/local/etc/oai ; sudo cp -vf $OPENAIRCN_DIR/ETC/hss_fd.conf /usr/local/etc/oai/freeDiameter ; $OPENAIRCN_DIR/SCRIPTS/check_hss_s6a_certificate /usr/local/etc/oai/freeDiameter/ hss.openair4G.eur; $OPENAIRCN_DIR/SCRIPTS/build_hss -c -c $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E ifconfig eth0 add 192.172.0.1 sleep 10;$OPENAIRCN_DIR/TEST/autotests/tools/run_epc @@ -3394,6 +3874,7 @@ c sudo mkdir -p /usr/local/etc/oai/freeDiamter; sudo cp -vf $OPENAIRCN_DIR/ETC/hss.conf /usr/local/etc/oai ; sudo cp -vf $OPENAIRCN_DIR/ETC/hss_fd.conf /usr/local/etc/oai/freeDiameter ; $OPENAIRCN_DIR/SCRIPTS/check_hss_s6a_certificate /usr/local/etc/oai/freeDiameter/ hss.openair4G.eur; $OPENAIRCN_DIR/SCRIPTS/build_hss -c +c $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E ifconfig eth0 add 192.172.0.1 sleep 10;$OPENAIRCN_DIR/TEST/autotests/tools/run_epc @@ -3568,10 +4049,10 @@ c targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf downlink_frequency 2660000000L targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf pdsch_referenceSignalPower -23 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf frame_type \"FDD\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf nb_antennas_rx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf pdsch_referenceSignalPower -23 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\" @@ -3597,7 +4078,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 17Mbits/s + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 17Mbits/s -B 192.172.0.2 @@ -3783,10 +4264,10 @@ c targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf downlink_frequency 2660000000L targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf pdsch_referenceSignalPower -23 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf frame_type \"FDD\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf nb_antennas_rx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf pdsch_referenceSignalPower -23 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\" @@ -3832,7 +4313,7 @@ c /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 - $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -u -c 192.172.0.2 -b 33Mbits/s + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -u -c 192.172.0.2 -b 10Mbits/s False @@ -3998,10 +4479,10 @@ c targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf downlink_frequency 2660000000L targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf pdsch_referenceSignalPower -23 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf frame_type \"FDD\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf nb_antennas_rx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf pdsch_referenceSignalPower -23 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\" @@ -4213,10 +4694,10 @@ c targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf downlink_frequency 2660000000L targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf pdsch_referenceSignalPower -23 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf frame_type \"FDD\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf nb_antennas_rx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf pdsch_referenceSignalPower -23 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\" @@ -4262,7 +4743,7 @@ c /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 - $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -c 192.172.0.2 + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 75 lo -c 192.172.0.2 False @@ -4270,6 +4751,890 @@ c 10 + + lte-softmodem + + mozart + stevens + amerique + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf N_RB_DL 25 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf nb_antennas_tx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf nb_antenna_ports 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ue_TransmissionMode 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail + + $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf + + + + + False + + /tmp + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 7Mbits/s -B 192.172.0.2 + + + + False + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue + + /tmp + + + + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -f m -u + + throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec + + False + USRPx310.ALU_EPC.Bandrich.5MHz.FDD.UDP.Band_7.UL.2TX.2RX.TM2 + 10 + + + + + lte-softmodem + + mozart + stevens + amerique + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf N_RB_DL 50 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf nb_antennas_tx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf nb_antenna_ports 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ue_TransmissionMode 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail + + $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf + + + + + False + + /tmp + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 14Mbits/s -B 192.172.0.2 + + + + False + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue + + /tmp + + + + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m + + throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec + + False + USRPx310.ALU_EPC.Bandrich.10MHz.FDD.UDP.Band_7.UL.2TX.2RX.TM2 + 10 + + + + lte-softmodem + + mozart + stevens + amerique + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf N_RB_DL 100 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf nb_antennas_tx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf nb_antenna_ports 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ue_TransmissionMode 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf pdsch_referenceSignalPower -23 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail + + $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf + + + + + False + + /tmp + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 28Mbits/s -B 192.172.0.2 + + + + False + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue + + /tmp + + + + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m + + throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec + + False + USRPx310.ALU_EPC.Bandrich.20MHz.FDD.UDP.Band_7.UL.2TX.2RX.TM2 + 10 + + + + lte-softmodem + + mozart + stevens + amerique + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf N_RB_DL 25 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf nb_antennas_tx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf nb_antenna_ports 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ue_TransmissionMode 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail + + $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf + + + + + False + + /tmp + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m + + False + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue + throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec + + + /tmp + + + + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -c 192.172.0.2 -i 1 -u -f m -b 16M + + + False + USRPx310.ALU_EPC.Bandrich.5MHz.FDD.UDP.Band_7.DL.2TX.2RX.TM2 + 10 + + + + lte-softmodem + + mozart + stevens + amerique + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf N_RB_DL 50 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf nb_antennas_tx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf nb_antenna_ports 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ue_TransmissionMode 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail + + $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf + + + + + False + + /tmp + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m + + False + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue + throughput_test min=0.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec + + + /tmp + + + + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -c 192.172.0.2 -b 33Mbits/s -i 1 -f m -u + + + False + USRPx310.ALU_EPC.Bandrich.10MHz.FDD.UDP.Band_7.DL.2TX.2RX.TM2 + 10 + + + + lte-softmodem + + mozart + stevens + amerique + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf N_RB_DL 100 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf nb_antennas_tx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf nb_antenna_ports 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ue_TransmissionMode 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf pdsch_referenceSignalPower -23 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail + + $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf + + + + + False + + /tmp + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m + + False + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue + throughput_test min=0.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec + + + /tmp + + + + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -u -c 192.172.0.2 -b 33Mbits/s + + + False + USRPx310.ALU_EPC.Bandrich.20MHz.FDD.UDP.Band_7.DL.2TX.2RX.TM2 + 10 + + + + lte-softmodem + + mozart + stevens + amerique + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf N_RB_DL 25 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf nb_antennas_tx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf nb_antenna_ports 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ue_TransmissionMode 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail + + $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf + + + + + False + + /tmp + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -c 192.172.0.1 -B 192.172.0.2 + + + + False + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue + + /tmp + + + + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -f m + + throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec + + False + USRPx310.ALU_EPC.Bandrich.5MHz.FDD.TCP.Band_7.UL.2TX.2RX.TM2 + 10 + + + + + lte-softmodem + + mozart + stevens + amerique + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf N_RB_DL 50 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf nb_antennas_tx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf nb_antenna_ports 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ue_TransmissionMode 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail + + $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf + + + + + False + + /tmp + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -c 192.172.0.1 -B 192.172.0.2 + + + + False + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue + + /tmp + + + + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -f m + + throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec + + False + USRPx310.ALU_EPC.Bandrich.10MHz.FDD.TCP.Band_7.UL.2TX.2RX.TM2 + 10 + + + + lte-softmodem + + mozart + stevens + amerique + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf N_RB_DL 100 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf nb_antennas_tx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf nb_antenna_ports 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ue_TransmissionMode 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf pdsch_referenceSignalPower -23 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail + + $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf + + + + + False + + /tmp + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -c 192.172.0.1 -B 192.172.0.2 + + + + False + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue + + /tmp + + + + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -f m + + throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec + + False + USRPx310.ALU_EPC.Bandrich.20MHz.FDD.TCP.Band_7.UL.2TX.2RX.TM2 + 10 + + + + lte-softmodem + + mozart + stevens + amerique + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf N_RB_DL 25 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf nb_antennas_tx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf nb_antenna_ports 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ue_TransmissionMode 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail + + $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf + + + + + False + + /tmp + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -f m + + False + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue + throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec + + + /tmp + + + + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -c 192.172.0.2 -i 1 -f m + + + False + USRPx310.ALU_EPC.Bandrich.5MHz.FDD.TCP.Band_7.DL.2TX.2RX.TM2 + 10 + + + + lte-softmodem + + mozart + stevens + amerique + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf N_RB_DL 50 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf nb_antennas_tx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf nb_antenna_ports 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ue_TransmissionMode 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail + + $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf + + + + + False + + /tmp + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -f m + + False + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue + throughput_test min=0.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec + + + /tmp + + + + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -c 192.172.0.2 -i 1 -f m + + + False + USRPx310.ALU_EPC.Bandrich.10MHz.FDD.TCP.Band_7.DL.2TX.2RX.TM2 + 10 + + + + lte-softmodem + + mozart + stevens + amerique + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf N_RB_DL 100 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf nb_antennas_tx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf nb_antenna_ports 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ue_TransmissionMode 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf pdsch_referenceSignalPower -23 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail + + $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf + + + + + False + + /tmp + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -f m -B 192.172.0.2 + + False + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue + throughput_test min=0.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec + + + /tmp + + + + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -c 192.172.0.2 -i 1 -f m + + + False + USRPx310.ALU_EPC.Bandrich.20MHz.FDD.TCP.Band_7.DL.2TX.2RX.TM2 + 10 + + @@ -4451,6 +5816,7 @@ c targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf downlink_frequency 2660000000L targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf pdsch_referenceSignalPower -23 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf frame_type \"FDD\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf nb_antennas_rx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf nb_antennas_tx 1 @@ -4479,7 +5845,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 17Mbits/s @@ -4694,6 +6060,7 @@ c targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf downlink_frequency 2660000000L targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf pdsch_referenceSignalPower -23 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf frame_type \"FDD\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf nb_antennas_rx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf nb_antennas_tx 1 @@ -4751,7 +6118,7 @@ c -r sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss --export-db $OPENAIRCN_TESTDIR/hss_export.db - $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -u -c 192.172.0.2 -b 33Mbits/s @@ -4912,21 +6279,22 @@ c amerique 390 /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 100 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf N_RB_DL 100 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf pdsch_referenceSignalPower -23 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_PORT_FOR_S1U 2152 $OPENAIR_DIR/cmake_targets/build_oai --eNB -w EXMIMO -x -c $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2 ; dmesg|tail @@ -5181,7 +6549,7 @@ c /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 - $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -c 192.172.0.2 -u -b 10Mbits/s False @@ -7255,12 +8623,12 @@ c targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2660000000L targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -29 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -32 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" @@ -7286,7 +8654,7 @@ c sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c 192.172.0.1 -b 14Mbits/s -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2 @@ -7478,12 +8846,12 @@ c targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2660000000L targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -29 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -32 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" @@ -7530,7 +8898,7 @@ c /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 - $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -c 192.172.0.2 -b 33M -i 1 -f m -u + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -c 192.172.0.2 -b 40Mbits/s -i 1 -f m -u False @@ -7702,12 +9070,12 @@ c targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2660000000L targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -29 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -32 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" @@ -7925,12 +9293,12 @@ c targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2660000000L targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -29 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -32 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" @@ -7986,5 +9354,925 @@ c + + lte-softmodem + + hutch + stevens + amerique + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf N_RB_DL 25 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antenna_ports 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_tx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ue_TransmissionMode 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\ + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.19/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf + + + + + False + + /tmp + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c 192.172.0.1 -b 7Mbits/s -B 192.172.0.2 + + + + False + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue + + /tmp + + + + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m + + throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=5.0Mbits/sec + + False + USRPb210.ALU_EPC.SonyExperiaM4.5MHz.FDD.UDP.Band_7.UL.2TX.2RX.TM2 + 10 + + + + + lte-softmodem + + hutch + stevens + amerique + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf N_RB_DL 50 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antenna_ports 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_tx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ue_TransmissionMode 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\ + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.19/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf + + + + + False + + /tmp + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c 192.172.0.1 -b 14Mbits/s -B 192.172.0.2 + + + + False + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue + + /tmp + + + + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m + + throughput_test min=00.0Mbits/sec max=10.0Mbits/sec average=10.0Mbits/sec + + False + USRPb210.ALU_EPC.SonyExperiaM4.10MHz.FDD.UDP.Band_7.UL.2TX.2RX.TM2 + 10 + + + + lte-softmodem + + hutch + stevens + amerique + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf N_RB_DL 100 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf pdsch_referenceSignalPower -32 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antenna_ports 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_tx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ue_TransmissionMode 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\ + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.19/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf + + + + + False + + /tmp + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c 192.172.0.1 -b 14Mbits/s -B 192.172.0.2 + + + + False + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue + + /tmp + + + + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m + + throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec + + False + USRPb210.ALU_EPC.SonyExperiaM4.20MHz.FDD.UDP.Band_7.UL.2TX.2RX.TM2 + 10 + + + + lte-softmodem + + hutch + stevens + amerique + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf N_RB_DL 25 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antenna_ports 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_tx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ue_TransmissionMode 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\ + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.19/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf + + + + + False + + /tmp + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -s -i 1 -u -f m + + throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec + + False + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue + + + /tmp + + + + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -c 192.172.0.2 -b 16Mbits/s -i 1 -f m -u + + + False + USRPb210.ALU_EPC.SonyExperiaM4.5MHz.FDD.UDP.Band_7.DL.2TX.2RX.TM2 + 10 + + + + lte-softmodem + + hutch + stevens + amerique + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf N_RB_DL 50 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antenna_ports 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_tx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ue_TransmissionMode 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\ + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.19/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf + + + + + False + + /tmp + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -s -i 1 -u -f m + + throughput_test min=0.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec + + False + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue + + + /tmp + + + + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -c 192.172.0.2 -b 33Mbits/s -i 1 -f m -u + + + False + USRPb210.ALU_EPC.SonyExperiaM4.10MHz.FDD.UDP.Band_7.DL.2TX.2RX.TM2 + 10 + + + + lte-softmodem + + hutch + stevens + amerique + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf N_RB_DL 100 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf pdsch_referenceSignalPower -32 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antenna_ports 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_tx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ue_TransmissionMode 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\ + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.19/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf + + + + + False + + /tmp + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -s -i 1 -u -f m + + throughput_test min=00.0Mbits/sec max=10.0Mbits/sec average=10.0Mbits/sec + + False + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue + + + /tmp + + + + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -c 192.172.0.2 -b 33M -i 1 -f m -u + + + False + USRPb210.ALU_EPC.SonyExperiaM4.20MHz.FDD.UDP.Band_7.DL.2TX.2RX.TM2 + 10 + + + + lte-softmodem + + hutch + stevens + amerique + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf N_RB_DL 25 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antenna_ports 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_tx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ue_TransmissionMode 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\ + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.19/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf + + + + + False + + /tmp + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -c 192.172.0.1 -B 192.172.0.2 + + + + False + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue + + /tmp + + + + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -f m + + throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=5.0Mbits/sec + + False + USRPb210.ALU_EPC.SonyExperiaM4.5MHz.FDD.TCP.Band_7.UL.2TX.2RX.TM2 + 10 + + + + + lte-softmodem + + hutch + stevens + amerique + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf N_RB_DL 50 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf pdsch_referenceSignalPower -32 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antenna_ports 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_tx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ue_TransmissionMode 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\ + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.19/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf + + + + + False + + /tmp + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -c 192.172.0.1 -B 192.172.0.2 + + + + False + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue + + /tmp + + + + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -f m + + throughput_test min=00.0Mbits/sec max=10.0Mbits/sec average=10.0Mbits/sec + + False + USRPb210.ALU_EPC.SonyExperiaM4.10MHz.FDD.TCP.Band_7.UL.2TX.2RX.TM2 + 10 + + + + lte-softmodem + + hutch + stevens + amerique + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf N_RB_DL 100 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf pdsch_referenceSignalPower -32 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antenna_ports 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_tx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ue_TransmissionMode 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\ + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.19/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf + + + + + False + + /tmp + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -c 192.172.0.1 -B 192.172.0.2 + + + + False + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue + + /tmp + + + + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -f m + + throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec + + False + USRPb210.ALU_EPC.SonyExperiaM4.20MHz.FDD.TCP.Band_7.UL.2TX.2RX.TM2 + 10 + + + + lte-softmodem + + hutch + stevens + amerique + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf N_RB_DL 25 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antenna_ports 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_tx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ue_TransmissionMode 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\ + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.19/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf + + + + + False + + /tmp + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -s -i 1 -f m + + throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec + + False + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue + + + /tmp + + + + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -c 192.172.0.2 -i 1 -f m + + + False + USRPb210.ALU_EPC.SonyExperiaM4.5MHz.FDD.TCP.Band_7.DL.2TX.2RX.TM2 + 10 + + + + lte-softmodem + + hutch + stevens + amerique + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf N_RB_DL 50 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antenna_ports 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_tx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ue_TransmissionMode 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\ + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.19/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf + + + + + False + + /tmp + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -s -i 1 -f m + + throughput_test min=0.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec + + False + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue + + + /tmp + + + + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -c 192.172.0.2 -i 1 -f m + + + False + USRPb210.ALU_EPC.SonyExperiaM4.10MHz.FDD.TCP.Band_7.DL.2TX.2RX.TM2 + 10 + + + + lte-softmodem + + hutch + stevens + amerique + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf N_RB_DL 100 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf pdsch_referenceSignalPower -32 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antenna_ports 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf nb_antennas_tx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ue_TransmissionMode 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\ + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.19/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf + + + + + False + + /tmp + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -s -i 1 -f m + + throughput_test min=00.0Mbits/sec max=10.0Mbits/sec average=10.0Mbits/sec + + False + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue + + + /tmp + + + + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -c 192.172.0.2 -i 1 -f m + + + False + USRPb210.ALU_EPC.SonyExperiaM4.20MHz.TCP.FDD.Band_7.DL.2TX.2RX.TM2 + 10 + + + diff --git a/cmake_targets/build_oai b/cmake_targets/build_oai index 967c92f557..63ce21f728 100755 --- a/cmake_targets/build_oai +++ b/cmake_targets/build_oai @@ -330,7 +330,7 @@ function main() { #By default: EXMIMO: enable if [ "$FORCE_DEADLINE_SCHEDULER_FLAG_USER" = "" ]; then if [ "$HW" = "EXMIMO" ] ; then - DEADLINE_SCHEDULER_FLAG_USER="False" + DEADLINE_SCHEDULER_FLAG_USER="True" elif [ "$HW" = "ETHERNET" ] ; then DEADLINE_SCHEDULER_FLAG_USER="True" elif [ "$HW" = "OAI_USRP" ] ; then diff --git a/openair1/PHY/MODULATION/slot_fep_ul.c b/openair1/PHY/MODULATION/slot_fep_ul.c index 57f4a6f7ab..c612893c5c 100644 --- a/openair1/PHY/MODULATION/slot_fep_ul.c +++ b/openair1/PHY/MODULATION/slot_fep_ul.c @@ -50,6 +50,10 @@ int slot_fep_ul(LTE_DL_FRAME_PARMS *frame_parms, void (*dft)(int16_t *,int16_t *, int); + int tmp_dft_in[2048] __attribute__ ((aligned (32))); // This is for misalignment issues for 6 and 15 PRBs + unsigned int frame_length_samples = frame_parms->samples_per_tti * 10; + unsigned int rx_offset; + switch (frame_parms->ofdm_symbol_size) { case 128: dft = dft128; @@ -103,28 +107,37 @@ int slot_fep_ul(LTE_DL_FRAME_PARMS *frame_parms, #endif for (aa=0; aanb_antennas_rx; aa++) { - + rx_offset = slot_offset +nb_prefix_samples0; if (l==0) { - dft( -#ifndef OFDMA_ULSCH - (int16_t *)&eNB_common_vars->rxdata_7_5kHz[eNB_id][aa][slot_offset + - nb_prefix_samples0], -#else - (int16_t *)&eNB_common_vars->rxdata[eNB_id][aa][((frame_parms->samples_per_tti>>1)*Ns) + - nb_prefix_samples0], -#endif - (int16_t *)&eNB_common_vars->rxdataF[eNB_id][aa][frame_parms->ofdm_symbol_size*symbol],1); + dft( (int16_t *)&eNB_common_vars->rxdata_7_5kHz[eNB_id][aa][rx_offset], + (int16_t *)&eNB_common_vars->rxdataF[eNB_id][aa][frame_parms->ofdm_symbol_size*symbol], + 1 + ); } else { - dft( -#ifndef OFDMA_ULSCH - (short *)&eNB_common_vars->rxdata_7_5kHz[eNB_id][aa][slot_offset + -#else - (short *)&eNB_common_vars->rxdata[eNB_id][aa][((frame_parms->samples_per_tti>>1)*Ns) + -#endif - (frame_parms->ofdm_symbol_size+nb_prefix_samples0+nb_prefix_samples) + - (frame_parms->ofdm_symbol_size+nb_prefix_samples)*(l-1)], - (short*)&eNB_common_vars->rxdataF[eNB_id][aa][frame_parms->ofdm_symbol_size*symbol],1); + rx_offset += (frame_parms->ofdm_symbol_size+nb_prefix_samples)*l; + if(rx_offset > (frame_length_samples - frame_parms->ofdm_symbol_size)) + { + memcpy((void *)&eNB_common_vars->rxdata_7_5kHz[eNB_id][aa][frame_length_samples], + (void *)&eNB_common_vars->rxdata_7_5kHz[eNB_id][aa][0], + frame_parms->ofdm_symbol_size*sizeof(int)); + } + + if( (rx_offset & 7) != 0){ + memcpy((void *)&tmp_dft_in, + (void *)&eNB_common_vars->rxdata_7_5kHz[eNB_id][aa][(rx_offset % frame_length_samples)], + frame_parms->ofdm_symbol_size*sizeof(int)); + dft( (short *) tmp_dft_in, + (short*) &eNB_common_vars->rxdataF[eNB_id][aa][frame_parms->ofdm_symbol_size*symbol], + 1 + ); + } + else{ + dft( (short *)&eNB_common_vars->rxdata_7_5kHz[eNB_id][aa][rx_offset], + (short*)&eNB_common_vars->rxdataF[eNB_id][aa][frame_parms->ofdm_symbol_size*symbol], + 1 + ); + } } } diff --git a/openair2/ENB_APP/enb_config.c b/openair2/ENB_APP/enb_config.c index 243e56bec5..cdcf5544c6 100755 --- a/openair2/ENB_APP/enb_config.c +++ b/openair2/ENB_APP/enb_config.c @@ -61,6 +61,27 @@ #include "LAYER2/MAC/extern.h" #include "PHY/extern.h" +/* those macros are here to help diagnose problems in configuration files + * if the lookup fails, a warning is printed + * (yes we can use the function name for the macro itself, the C preprocessor + * won't die in an infinite loop) + */ +#define config_setting_lookup_int(setting, name, value) \ + (config_setting_lookup_int(setting, name, value) || \ + (printf("WARNING: setting '%s' not found in configuration file\n", name), 0)) +#define config_setting_lookup_int64(setting, name, value) \ + (config_setting_lookup_int64(setting, name, value) || \ + (printf("WARNING: setting '%s' not found in configuration file\n", name), 0)) +#define config_setting_lookup_float(setting, name, value) \ + (config_setting_lookup_float(setting, name, value) || \ + (printf("WARNING: setting '%s' not found in configuration file\n", name), 0)) +#define config_setting_lookup_bool(setting, name, value) \ + (config_setting_lookup_bool(setting, name, value) || \ + (printf("WARNING: setting '%s' not found in configuration file\n", name), 0)) +#define config_setting_lookup_string(setting, name, value) \ + (config_setting_lookup_string(setting, name, value) || \ + (printf("WARNING: setting '%s' not found in configuration file\n", name), 0)) + #define ENB_CONFIG_STRING_ACTIVE_ENBS "Active_eNBs" #define ENB_CONFIG_STRING_ENB_LIST "eNBs" @@ -524,7 +545,6 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) int num_component_carriers = 0; int i = 0; int j = 0; - int parse_errors = 0; libconfig_int enb_id = 0; const char* cc_node_function = NULL; @@ -731,7 +751,6 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) if (setting != NULL) { enb_properties_index = 0; - parse_errors = 0; num_enbs = config_setting_length(setting); for (i = 0; i < num_enbs; i++) { @@ -758,7 +777,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) ) ) { - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, %u th enb\n", lib_config_file_name_pP, i); continue; // FIXME this prevents segfaults below, not sure what happens after function exit @@ -776,7 +795,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) } else if (strcmp(cell_type, "CELL_HOME_ENB") == 0) { enb_properties.properties[enb_properties_index]->cell_type = CELL_HOME_ENB; } else { - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%s\" for cell_type choice: CELL_MACRO_ENB or CELL_HOME_ENB !\n", lib_config_file_name_pP, i, cell_type); } @@ -883,7 +902,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) #endif )) { - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, Component Carrier %d!\n", lib_config_file_name_pP, enb_properties.properties[enb_properties_index]->nb_cc++); continue; // FIXME this prevents segfaults below, not sure what happens after function exit @@ -928,17 +947,17 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) } enb_properties.properties[enb_properties_index]->tdd_config[j] = tdd_config; - AssertError (tdd_config <= TDD_Config__subframeAssignment_sa6, parse_errors ++, + AssertFatal (tdd_config <= TDD_Config__subframeAssignment_sa6, "Failed to parse eNB configuration file %s, enb %d illegal tdd_config %d (should be 0-%d)!", lib_config_file_name_pP, i, tdd_config, TDD_Config__subframeAssignment_sa6); enb_properties.properties[enb_properties_index]->tdd_config_s[j] = tdd_config_s; - AssertError (tdd_config_s <= TDD_Config__specialSubframePatterns_ssp8, parse_errors ++, + AssertFatal (tdd_config_s <= TDD_Config__specialSubframePatterns_ssp8, "Failed to parse eNB configuration file %s, enb %d illegal tdd_config_s %d (should be 0-%d)!", lib_config_file_name_pP, i, tdd_config_s, TDD_Config__specialSubframePatterns_ssp8); if (!prefix_type) - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d define %s: NORMAL,EXTENDED!\n", lib_config_file_name_pP, i, ENB_CONFIG_STRING_PREFIX_TYPE); else if (strcmp(prefix_type, "NORMAL") == 0) { @@ -946,7 +965,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) } else if (strcmp(prefix_type, "EXTENDED") == 0) { enb_properties.properties[enb_properties_index]->prefix_type[j] = EXTENDED; } else { - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%s\" for prefix_type choice: NORMAL or EXTENDED !\n", lib_config_file_name_pP, i, prefix_type); } @@ -957,7 +976,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) enb_properties.properties[enb_properties_index]->Nid_cell[j]= Nid_cell; if (Nid_cell>503) { - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for Nid_cell choice: 0...503 !\n", lib_config_file_name_pP, i, Nid_cell); } @@ -965,7 +984,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) enb_properties.properties[enb_properties_index]->N_RB_DL[j]= N_RB_DL; if ((N_RB_DL!=6) && (N_RB_DL!=15) && (N_RB_DL!=25) && (N_RB_DL!=50) && (N_RB_DL!=75) && (N_RB_DL!=100)) { - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for N_RB_DL choice: 6,15,25,50,75,100 !\n", lib_config_file_name_pP, i, N_RB_DL); } @@ -975,27 +994,27 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) } else if (strcmp(frame_type, "TDD") == 0) { enb_properties.properties[enb_properties_index]->frame_type[j] = TDD; } else { - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%s\" for frame_type choice: FDD or TDD !\n", lib_config_file_name_pP, i, frame_type); } enb_properties.properties[enb_properties_index]->tdd_config[j] = tdd_config; - AssertError (tdd_config <= TDD_Config__subframeAssignment_sa6, parse_errors ++, + AssertFatal (tdd_config <= TDD_Config__subframeAssignment_sa6, "Failed to parse eNB configuration file %s, enb %d illegal tdd_config %d (should be 0-%d)!", lib_config_file_name_pP, i, tdd_config, TDD_Config__subframeAssignment_sa6); enb_properties.properties[enb_properties_index]->tdd_config_s[j] = tdd_config_s; - AssertError (tdd_config_s <= TDD_Config__specialSubframePatterns_ssp8, parse_errors ++, + AssertFatal (tdd_config_s <= TDD_Config__specialSubframePatterns_ssp8, "Failed to parse eNB configuration file %s, enb %d illegal tdd_config_s %d (should be 0-%d)!", lib_config_file_name_pP, i, tdd_config_s, TDD_Config__specialSubframePatterns_ssp8); if (!prefix_type) - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d define %s: NORMAL,EXTENDED!\n", lib_config_file_name_pP, i, ENB_CONFIG_STRING_PREFIX_TYPE); else if (strcmp(prefix_type, "NORMAL") == 0) { @@ -1003,7 +1022,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) } else if (strcmp(prefix_type, "EXTENDED") == 0) { enb_properties.properties[enb_properties_index]->prefix_type[j] = EXTENDED; } else { - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%s\" for prefix_type choice: NORMAL or EXTENDED !\n", lib_config_file_name_pP, i, prefix_type); } @@ -1021,64 +1040,66 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) enb_properties.properties[enb_properties_index]->uplink_frequency_offset[j] = (unsigned int) uplink_frequency_offset; - parse_errors += enb_check_band_frequencies(lib_config_file_name_pP, + if (enb_check_band_frequencies(lib_config_file_name_pP, enb_properties_index, enb_properties.properties[enb_properties_index]->eutra_band[j], enb_properties.properties[enb_properties_index]->downlink_frequency[j], enb_properties.properties[enb_properties_index]->uplink_frequency_offset[j], - enb_properties.properties[enb_properties_index]->frame_type[j]); + enb_properties.properties[enb_properties_index]->frame_type[j])) { + AssertFatal(0, "error calling enb_check_band_frequencies\n"); + } enb_properties.properties[enb_properties_index]->nb_antennas_tx[j] = nb_antennas_tx; if ((nb_antenna_ports <1) || (nb_antenna_ports > 2)) - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for nb_antenna_ports choice: 1..2 !\n", lib_config_file_name_pP, i, nb_antenna_ports); enb_properties.properties[enb_properties_index]->nb_antenna_ports[j] = nb_antenna_ports; if ((nb_antennas_tx <1) || (nb_antennas_tx > 64)) - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for nb_antennas_tx choice: 1..4 !\n", lib_config_file_name_pP, i, nb_antennas_tx); enb_properties.properties[enb_properties_index]->nb_antennas_rx[j] = nb_antennas_rx; if ((nb_antennas_rx <1) || (nb_antennas_rx > 4)) - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for nb_antennas_rx choice: 1..4 !\n", lib_config_file_name_pP, i, nb_antennas_rx); enb_properties.properties[enb_properties_index]->tx_gain[j] = tx_gain; if ((tx_gain <0) || (tx_gain > 127)) - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for tx_gain choice: 0..127 !\n", lib_config_file_name_pP, i, tx_gain); enb_properties.properties[enb_properties_index]->rx_gain[j] = rx_gain; if ((rx_gain <0) || (rx_gain > 160)) - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for rx_gain choice: 0..160 !\n", lib_config_file_name_pP, i, rx_gain); enb_properties.properties[enb_properties_index]->prach_root[j] = prach_root; if ((prach_root <0) || (prach_root > 1023)) - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for prach_root choice: 0..1023 !\n", lib_config_file_name_pP, i, prach_root); enb_properties.properties[enb_properties_index]->prach_config_index[j] = prach_config_index; if ((prach_config_index <0) || (prach_config_index > 63)) - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for prach_config_index choice: 0..1023 !\n", lib_config_file_name_pP, i, prach_config_index); if (!prach_high_speed) - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d define %s: ENABLE,DISABLE!\n", lib_config_file_name_pP, i, ENB_CONFIG_STRING_PRACH_HIGH_SPEED); else if (strcmp(prach_high_speed, "ENABLE") == 0) { @@ -1086,21 +1107,21 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) } else if (strcmp(prach_high_speed, "DISABLE") == 0) { enb_properties.properties[enb_properties_index]->prach_high_speed[j] = FALSE; } else - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%s\" for prach_config choice: ENABLE,DISABLE !\n", lib_config_file_name_pP, i, prach_high_speed); enb_properties.properties[enb_properties_index]->prach_zero_correlation[j] =prach_zero_correlation; if ((prach_zero_correlation <0) || (prach_zero_correlation > 15)) - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for prach_zero_correlation choice: 0..15!\n", lib_config_file_name_pP, i, prach_zero_correlation); enb_properties.properties[enb_properties_index]->prach_freq_offset[j] = prach_freq_offset; if ((prach_freq_offset <0) || (prach_freq_offset > 94)) - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for prach_freq_offset choice: 0..94!\n", lib_config_file_name_pP, i, prach_freq_offset); @@ -1108,21 +1129,21 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) enb_properties.properties[enb_properties_index]->pucch_delta_shift[j] = pucch_delta_shift-1; if ((pucch_delta_shift <1) || (pucch_delta_shift > 3)) - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for pucch_delta_shift choice: 1..3!\n", lib_config_file_name_pP, i, pucch_delta_shift); enb_properties.properties[enb_properties_index]->pucch_nRB_CQI[j] = pucch_nRB_CQI; if ((pucch_nRB_CQI <0) || (pucch_nRB_CQI > 98)) - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for pucch_nRB_CQI choice: 0..98!\n", lib_config_file_name_pP, i, pucch_nRB_CQI); enb_properties.properties[enb_properties_index]->pucch_nCS_AN[j] = pucch_nCS_AN; if ((pucch_nCS_AN <0) || (pucch_nCS_AN > 7)) - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for pucch_nCS_AN choice: 0..7!\n", lib_config_file_name_pP, i, pucch_nCS_AN); @@ -1130,7 +1151,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) enb_properties.properties[enb_properties_index]->pucch_n1_AN[j] = pucch_n1_AN; if ((pucch_n1_AN <0) || (pucch_n1_AN > 2047)) - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for pucch_n1_AN choice: 0..2047!\n", lib_config_file_name_pP, i, pucch_n1_AN); @@ -1138,26 +1159,26 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) enb_properties.properties[enb_properties_index]->pdsch_referenceSignalPower[j] = pdsch_referenceSignalPower; if ((pdsch_referenceSignalPower <-60) || (pdsch_referenceSignalPower > 50)) - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for pdsch_referenceSignalPower choice:-60..50!\n", lib_config_file_name_pP, i, pdsch_referenceSignalPower); enb_properties.properties[enb_properties_index]->pdsch_p_b[j] = pdsch_p_b; if ((pdsch_p_b <0) || (pdsch_p_b > 3)) - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for pdsch_p_b choice: 0..3!\n", lib_config_file_name_pP, i, pdsch_p_b); enb_properties.properties[enb_properties_index]->pusch_n_SB[j] = pusch_n_SB; if ((pusch_n_SB <1) || (pusch_n_SB > 4)) - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for pusch_n_SB choice: 1..4!\n", lib_config_file_name_pP, i, pusch_n_SB); if (!pusch_hoppingMode) - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d define %s: interSubframe,intraAndInterSubframe!\n", lib_config_file_name_pP, i, ENB_CONFIG_STRING_PUSCH_HOPPINGMODE); else if (strcmp(pusch_hoppingMode,"interSubFrame")==0) { @@ -1165,19 +1186,19 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) } else if (strcmp(pusch_hoppingMode,"intraAndInterSubFrame")==0) { enb_properties.properties[enb_properties_index]->pusch_hoppingMode[j] = PUSCH_ConfigCommon__pusch_ConfigBasic__hoppingMode_intraAndInterSubFrame; } else - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%s\" for pusch_hoppingMode choice: interSubframe,intraAndInterSubframe!\n", lib_config_file_name_pP, i, pusch_hoppingMode); enb_properties.properties[enb_properties_index]->pusch_hoppingOffset[j] = pusch_hoppingOffset; if ((pusch_hoppingOffset<0) || (pusch_hoppingOffset>98)) - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%s\" for pusch_hoppingOffset choice: 0..98!\n", lib_config_file_name_pP, i, pusch_hoppingMode); if (!pusch_enable64QAM) - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d define %s: ENABLE,DISABLE!\n", lib_config_file_name_pP, i, ENB_CONFIG_STRING_PUSCH_ENABLE64QAM); else if (strcmp(pusch_enable64QAM, "ENABLE") == 0) { @@ -1185,12 +1206,12 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) } else if (strcmp(pusch_enable64QAM, "DISABLE") == 0) { enb_properties.properties[enb_properties_index]->pusch_enable64QAM[j] = FALSE; } else - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%s\" for pusch_enable64QAM choice: ENABLE,DISABLE!\n", lib_config_file_name_pP, i, pusch_enable64QAM); if (!pusch_groupHoppingEnabled) - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d define %s: ENABLE,DISABLE!\n", lib_config_file_name_pP, i, ENB_CONFIG_STRING_PUSCH_GROUP_HOPPING_EN); else if (strcmp(pusch_groupHoppingEnabled, "ENABLE") == 0) { @@ -1198,7 +1219,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) } else if (strcmp(pusch_groupHoppingEnabled, "DISABLE") == 0) { enb_properties.properties[enb_properties_index]->pusch_groupHoppingEnabled[j] = FALSE; } else - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%s\" for pusch_groupHoppingEnabled choice: ENABLE,DISABLE!\n", lib_config_file_name_pP, i, pusch_groupHoppingEnabled); @@ -1206,12 +1227,12 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) enb_properties.properties[enb_properties_index]->pusch_groupAssignment[j] = pusch_groupAssignment; if ((pusch_groupAssignment<0)||(pusch_groupAssignment>29)) - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for pusch_groupAssignment choice: 0..29!\n", lib_config_file_name_pP, i, pusch_groupAssignment); if (!pusch_sequenceHoppingEnabled) - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d define %s: ENABLE,DISABLE!\n", lib_config_file_name_pP, i, ENB_CONFIG_STRING_PUSCH_SEQUENCE_HOPPING_EN); else if (strcmp(pusch_sequenceHoppingEnabled, "ENABLE") == 0) { @@ -1219,14 +1240,14 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) } else if (strcmp(pusch_sequenceHoppingEnabled, "DISABLE") == 0) { enb_properties.properties[enb_properties_index]->pusch_sequenceHoppingEnabled[j] = FALSE; } else - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%s\" for pusch_sequenceHoppingEnabled choice: ENABLE,DISABLE!\n", lib_config_file_name_pP, i, pusch_sequenceHoppingEnabled); enb_properties.properties[enb_properties_index]->pusch_nDMRS1[j] = pusch_nDMRS1; //cyclic_shift in RRC! if ((pusch_nDMRS1 <0) || (pusch_nDMRS1>7)) - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for pusch_nDMRS1 choice: 0..7!\n", lib_config_file_name_pP, i, pusch_nDMRS1); @@ -1235,7 +1256,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) } else if (strcmp(phich_duration,"EXTENDED")==0) { enb_properties.properties[enb_properties_index]->phich_duration[j] = extended; } else - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%s\" for phich_duration choice: NORMAL,EXTENDED!\n", lib_config_file_name_pP, i, phich_duration); @@ -1248,7 +1269,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) } else if (strcmp(phich_resource,"TWO")==0) { enb_properties.properties[enb_properties_index]->phich_resource[j] = two; } else - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%s\" for phich_resource choice: ONESIXTH,HALF,ONE,TWO!\n", lib_config_file_name_pP, i, phich_resource); @@ -1257,7 +1278,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) } else if (strcmp(srs_enable, "DISABLE") == 0) { enb_properties.properties[enb_properties_index]->srs_enable[j] = FALSE; } else - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%s\" for srs_BandwidthConfig choice: ENABLE,DISABLE !\n", lib_config_file_name_pP, i, srs_enable); @@ -1267,21 +1288,20 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) && config_setting_lookup_string(component_carrier, ENB_CONFIG_STRING_SRS_ACKNACKST_CONFIG, &srs_ackNackST) && config_setting_lookup_string(component_carrier, ENB_CONFIG_STRING_SRS_MAXUPPTS, &srs_MaxUpPts) )) - AssertError(0, - parse_errors++, + AssertFatal(0, "Failed to parse eNB configuration file %s, enb %d unknown values for srs_BandwidthConfig, srs_SubframeConfig, srs_ackNackST, srs_MaxUpPts\n", lib_config_file_name_pP, i); enb_properties.properties[enb_properties_index]->srs_BandwidthConfig[j] = srs_BandwidthConfig; if ((srs_BandwidthConfig < 0) || (srs_BandwidthConfig >7)) - AssertError (0, parse_errors ++, "Failed to parse eNB configuration file %s, enb %d unknown value %d for srs_BandwidthConfig choice: 0...7\n", + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value %d for srs_BandwidthConfig choice: 0...7\n", lib_config_file_name_pP, i, srs_BandwidthConfig); enb_properties.properties[enb_properties_index]->srs_SubframeConfig[j] = srs_SubframeConfig; if ((srs_SubframeConfig<0) || (srs_SubframeConfig>15)) - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for srs_SubframeConfig choice: 0..15 !\n", lib_config_file_name_pP, i, srs_SubframeConfig); @@ -1290,7 +1310,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) } else if (strcmp(srs_ackNackST, "DISABLE") == 0) { enb_properties.properties[enb_properties_index]->srs_ackNackST[j] = FALSE; } else - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%s\" for srs_BandwidthConfig choice: ENABLE,DISABLE !\n", lib_config_file_name_pP, i, srs_ackNackST); @@ -1299,7 +1319,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) } else if (strcmp(srs_MaxUpPts, "DISABLE") == 0) { enb_properties.properties[enb_properties_index]->srs_MaxUpPts[j] = FALSE; } else - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%s\" for srs_MaxUpPts choice: ENABLE,DISABLE !\n", lib_config_file_name_pP, i, srs_MaxUpPts); } @@ -1307,7 +1327,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) enb_properties.properties[enb_properties_index]->pusch_p0_Nominal[j] = pusch_p0_Nominal; if ((pusch_p0_Nominal<-126) || (pusch_p0_Nominal>24)) - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for pusch_p0_Nominal choice: -126..24 !\n", lib_config_file_name_pP, i, pusch_p0_Nominal); @@ -1328,21 +1348,21 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) } else if (strcmp(pusch_alpha,"AL1")==0) { enb_properties.properties[enb_properties_index]->pusch_alpha[j] = UplinkPowerControlCommon__alpha_al1; } else - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%s\" for pucch_Alpha choice: AL0,AL04,AL05,AL06,AL07,AL08,AL09,AL1!\n", lib_config_file_name_pP, i, pusch_alpha); enb_properties.properties[enb_properties_index]->pucch_p0_Nominal[j] = pucch_p0_Nominal; if ((pucch_p0_Nominal<-127) || (pucch_p0_Nominal>-96)) - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for pucch_p0_Nominal choice: -127..-96 !\n", lib_config_file_name_pP, i, pucch_p0_Nominal); enb_properties.properties[enb_properties_index]->msg3_delta_Preamble[j] = msg3_delta_Preamble; if ((msg3_delta_Preamble<-1) || (msg3_delta_Preamble>6)) - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for msg3_delta_Preamble choice: -1..6 !\n", lib_config_file_name_pP, i, msg3_delta_Preamble); @@ -1354,7 +1374,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) } else if (strcmp(pucch_deltaF_Format1,"deltaF2")==0) { enb_properties.properties[enb_properties_index]->pucch_deltaF_Format1[j] = DeltaFList_PUCCH__deltaF_PUCCH_Format1_deltaF2; } else - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%s\" for pucch_deltaF_Format1 choice: deltaF_2,dltaF0,deltaF2!\n", lib_config_file_name_pP, i, pucch_deltaF_Format1); @@ -1365,7 +1385,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) } else if (strcmp(pucch_deltaF_Format1b,"deltaF5")==0) { enb_properties.properties[enb_properties_index]->pucch_deltaF_Format1b[j] = DeltaFList_PUCCH__deltaF_PUCCH_Format1b_deltaF5; } else - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%s\" for pucch_deltaF_Format1b choice: deltaF1,dltaF3,deltaF5!\n", lib_config_file_name_pP, i, pucch_deltaF_Format1b); @@ -1379,7 +1399,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) } else if (strcmp(pucch_deltaF_Format2,"deltaF2")==0) { enb_properties.properties[enb_properties_index]->pucch_deltaF_Format2[j] = DeltaFList_PUCCH__deltaF_PUCCH_Format2_deltaF2; } else - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%s\" for pucch_deltaF_Format2 choice: deltaF_2,dltaF0,deltaF1,deltaF2!\n", lib_config_file_name_pP, i, pucch_deltaF_Format2); @@ -1390,7 +1410,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) } else if (strcmp(pucch_deltaF_Format2a,"deltaF2")==0) { enb_properties.properties[enb_properties_index]->pucch_deltaF_Format2a[j] = DeltaFList_PUCCH__deltaF_PUCCH_Format2a_deltaF2; } else - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%s\" for pucch_deltaF_Format2a choice: deltaF_2,dltaF0,deltaF2!\n", lib_config_file_name_pP, i, pucch_deltaF_Format2a); @@ -1401,7 +1421,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) } else if (strcmp(pucch_deltaF_Format2b,"deltaF2")==0) { enb_properties.properties[enb_properties_index]->pucch_deltaF_Format2b[j] = DeltaFList_PUCCH__deltaF_PUCCH_Format2b_deltaF2; } else - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%s\" for pucch_deltaF_Format2b choice: deltaF_2,dltaF0,deltaF2!\n", lib_config_file_name_pP, i, pucch_deltaF_Format2b); @@ -1411,7 +1431,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) enb_properties.properties[enb_properties_index]->rach_numberOfRA_Preambles[j] = (rach_numberOfRA_Preambles/4)-1; if ((rach_numberOfRA_Preambles <4) || (rach_numberOfRA_Preambles>64) || ((rach_numberOfRA_Preambles&3)!=0)) - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for rach_numberOfRA_Preambles choice: 4,8,12,...,64!\n", lib_config_file_name_pP, i, rach_numberOfRA_Preambles); @@ -1421,14 +1441,14 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) if (!(config_setting_lookup_int(component_carrier, ENB_CONFIG_STRING_RACH_SIZEOFRA_PREAMBLESGROUPA, &rach_sizeOfRA_PreamblesGroupA) && config_setting_lookup_int(component_carrier, ENB_CONFIG_STRING_RACH_MESSAGESIZEGROUPA, &rach_messageSizeGroupA) && config_setting_lookup_string(component_carrier, ENB_CONFIG_STRING_RACH_MESSAGEPOWEROFFSETGROUPB, &rach_messagePowerOffsetGroupB))) - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d rach_sizeOfRA_PreamblesGroupA, messageSizeGroupA,messagePowerOffsetGroupB!\n", lib_config_file_name_pP, i); enb_properties.properties[enb_properties_index]->rach_sizeOfRA_PreamblesGroupA[j] = (rach_sizeOfRA_PreamblesGroupA/4)-1; if ((rach_numberOfRA_Preambles <4) || (rach_numberOfRA_Preambles>60) || ((rach_numberOfRA_Preambles&3)!=0)) - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for rach_sizeOfRA_PreamblesGroupA choice: 4,8,12,...,60!\n", lib_config_file_name_pP, i, rach_sizeOfRA_PreamblesGroupA); @@ -1451,7 +1471,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) break; default: - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for rach_messageSizeGroupA choice: 56,144,208,256!\n", lib_config_file_name_pP, i, rach_messageSizeGroupA); break; @@ -1488,21 +1508,21 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) else if (strcmp(rach_messagePowerOffsetGroupB,"dB18")==0) { enb_properties.properties[enb_properties_index]->rach_messagePowerOffsetGroupB[j] = RACH_ConfigCommon__preambleInfo__preamblesGroupAConfig__messagePowerOffsetGroupB_dB18; } else - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%s\" for rach_messagePowerOffsetGroupB choice: minusinfinity,dB0,dB5,dB8,dB10,dB12,dB15,dB18!\n", lib_config_file_name_pP, i, rach_messagePowerOffsetGroupB); } else if (strcmp(rach_preamblesGroupAConfig, "DISABLE") == 0) { enb_properties.properties[enb_properties_index]->rach_preamblesGroupAConfig[j] = FALSE; } else - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%s\" for rach_preamblesGroupAConfig choice: ENABLE,DISABLE !\n", lib_config_file_name_pP, i, rach_preamblesGroupAConfig); enb_properties.properties[enb_properties_index]->rach_preambleInitialReceivedTargetPower[j] = (rach_preambleInitialReceivedTargetPower+120)/2; if ((rach_preambleInitialReceivedTargetPower<-120) || (rach_preambleInitialReceivedTargetPower>-90) || ((rach_preambleInitialReceivedTargetPower&1)!=0)) - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for rach_preambleInitialReceivedTargetPower choice: -120,-118,...,-90 !\n", lib_config_file_name_pP, i, rach_preambleInitialReceivedTargetPower); @@ -1510,7 +1530,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) enb_properties.properties[enb_properties_index]->rach_powerRampingStep[j] = rach_powerRampingStep/2; if ((rach_powerRampingStep<0) || (rach_powerRampingStep>6) || ((rach_powerRampingStep&1)!=0)) - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for rach_powerRampingStep choice: 0,2,4,6 !\n", lib_config_file_name_pP, i, rach_powerRampingStep); @@ -1562,7 +1582,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) break; default: - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for rach_preambleTransMax choice: 3,4,5,6,7,8,10,20,50,100,200!\n", lib_config_file_name_pP, i, rach_preambleTransMax); break; @@ -1571,7 +1591,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) enb_properties.properties[enb_properties_index]->rach_raResponseWindowSize[j] = (rach_raResponseWindowSize==10)?7:rach_raResponseWindowSize-2; if ((rach_raResponseWindowSize<0)||(rach_raResponseWindowSize==9)||(rach_raResponseWindowSize>10)) - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for rach_raResponseWindowSize choice: 2,3,4,5,6,7,8,10!\n", lib_config_file_name_pP, i, rach_preambleTransMax); @@ -1579,14 +1599,14 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) enb_properties.properties[enb_properties_index]->rach_macContentionResolutionTimer[j] = (rach_macContentionResolutionTimer/8)-1; if ((rach_macContentionResolutionTimer<8) || (rach_macContentionResolutionTimer>64) || ((rach_macContentionResolutionTimer&7)!=0)) - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for rach_macContentionResolutionTimer choice: 8,16,...,56,64!\n", lib_config_file_name_pP, i, rach_preambleTransMax); enb_properties.properties[enb_properties_index]->rach_maxHARQ_Msg3Tx[j] = rach_maxHARQ_Msg3Tx; if ((rach_maxHARQ_Msg3Tx<0) || (rach_maxHARQ_Msg3Tx>8)) - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for rach_maxHARQ_Msg3Tx choice: 1..8!\n", lib_config_file_name_pP, i, rach_preambleTransMax); @@ -1609,7 +1629,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) break; default: - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for pcch_defaultPagingCycle choice: 32,64,128,256!\n", lib_config_file_name_pP, i, pcch_defaultPagingCycle); break; @@ -1632,7 +1652,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) } else if (strcmp(pcch_nB, "oneThirtySecondT") == 0) { enb_properties.properties[enb_properties_index]->pcch_nB[j] = PCCH_Config__nB_oneThirtySecondT; } else - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for pcch_nB choice: fourT,twoT,oneT,halfT,quarterT,oneighthT,oneSixteenthT,oneThirtySecondT !\n", lib_config_file_name_pP, i, pcch_defaultPagingCycle); @@ -1656,7 +1676,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) break; default: - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for bcch_modificationPeriodCoeff choice: 2,4,8,16", lib_config_file_name_pP, i, bcch_modificationPeriodCoeff); @@ -1698,7 +1718,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) break; default: - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for ue_TimersAndConstants_t300 choice: 100,200,300,400,600,1000,1500,2000 ", lib_config_file_name_pP, i, ue_TimersAndConstants_t300); break; @@ -1739,7 +1759,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) break; default: - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for ue_TimersAndConstants_t301 choice: 100,200,300,400,600,1000,1500,2000 ", lib_config_file_name_pP, i, ue_TimersAndConstants_t301); break; @@ -1776,7 +1796,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) break; default: - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for ue_TimersAndConstants_t310 choice: 0,50,100,200,500,1000,1500,2000 ", lib_config_file_name_pP, i, ue_TimersAndConstants_t310); break; @@ -1813,7 +1833,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) break; default: - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for ue_TimersAndConstants_t311 choice: 1000,3000,5000,10000,150000,20000,30000", lib_config_file_name_pP, i, ue_TimersAndConstants_t311); break; @@ -1854,7 +1874,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) break; default: - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for ue_TimersAndConstants_n310 choice: 1,2,3,4,6,6,8,10,20", lib_config_file_name_pP, i, ue_TimersAndConstants_n311); break; @@ -1895,7 +1915,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) break; default: - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for ue_TimersAndConstants_t311 choice: 1,2,3,4,5,6,8,10", lib_config_file_name_pP, i, ue_TimersAndConstants_t311); break; @@ -1925,7 +1945,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) enb_properties.properties[enb_properties_index]->ue_TransmissionMode[j] = AntennaInfoDedicated__transmissionMode_tm7; break; default: - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for ue_TransmissionMode choice: 1,2,3,4,5,6,7", lib_config_file_name_pP, i, ue_TransmissionMode); break; @@ -1942,7 +1962,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) && config_setting_lookup_int(setting_srb1, ENB_CONFIG_STRING_SRB1_MAX_RETX_THRESHOLD, &srb1_max_retx_threshold) && config_setting_lookup_int(setting_srb1, ENB_CONFIG_STRING_SRB1_POLL_PDU, &srb1_poll_pdu) && config_setting_lookup_int(setting_srb1, ENB_CONFIG_STRING_SRB1_POLL_BYTE, &srb1_poll_byte))) - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, enb %d timer_poll_retransmit, timer_reordering, " "timer_status_prohibit, poll_pdu, poll_byte, max_retx_threshold !\n", lib_config_file_name_pP, i); @@ -1981,7 +2001,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) break; default: - AssertError (0, parse_errors ++, + AssertFatal (0, "Bad config value when parsing eNB configuration file %s, enb %d srb1_max_retx_threshold %u!\n", lib_config_file_name_pP, i, srb1_max_retx_threshold); } @@ -2019,7 +2039,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) if (srb1_poll_pdu >= 10000) enb_properties.properties[enb_properties_index]->srb1_poll_pdu = PollPDU_pInfinity; else - AssertError (0, parse_errors ++, + AssertFatal (0, "Bad config value when parsing eNB configuration file %s, enb %d srb1_poll_pdu %u!\n", lib_config_file_name_pP, i, srb1_poll_pdu); } @@ -2087,7 +2107,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) if (srb1_poll_byte >= 10000) enb_properties.properties[enb_properties_index]->srb1_poll_byte = PollByte_kBinfinity; else - AssertError (0, parse_errors ++, + AssertFatal (0, "Bad config value when parsing eNB configuration file %s, enb %d srb1_poll_byte %u!\n", lib_config_file_name_pP, i, srb1_poll_byte); } @@ -2097,7 +2117,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) } else if (srb1_timer_poll_retransmit <= 500) { enb_properties.properties[enb_properties_index]->srb1_timer_poll_retransmit = (srb1_timer_poll_retransmit - 300)/50 + 50; } else { - AssertError (0, parse_errors ++, + AssertFatal (0, "Bad config value when parsing eNB configuration file %s, enb %d srb1_timer_poll_retransmit %u!\n", lib_config_file_name_pP, i, srb1_timer_poll_retransmit); } @@ -2107,7 +2127,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) } else if ((srb1_timer_poll_retransmit >= 300) && (srb1_timer_poll_retransmit <= 500)) { enb_properties.properties[enb_properties_index]->srb1_timer_status_prohibit = (srb1_timer_status_prohibit - 300)/50 + 51; } else { - AssertError (0, parse_errors ++, + AssertFatal (0, "Bad config value when parsing eNB configuration file %s, enb %d srb1_timer_status_prohibit %u!\n", lib_config_file_name_pP, i, srb1_timer_status_prohibit); } @@ -2238,7 +2258,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) break; default: - AssertError (0, parse_errors ++, + AssertFatal (0, "Bad config value when parsing eNB configuration file %s, enb %d srb1_timer_reordering %u!\n", lib_config_file_name_pP, i, srb1_timer_reordering); } @@ -2265,7 +2285,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) && config_setting_lookup_string(setting_mme_address, ENB_CONFIG_STRING_MME_IP_ADDRESS_PREFERENCE, (const char **)&preference) ) ) { - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, %u th enb %u th mme address !\n", lib_config_file_name_pP, i, j); continue; // FIXME will prevent segfaults below, not sure what happens at function exit... @@ -2315,7 +2335,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) && config_setting_lookup_int(setting_rrh_gw, ENB_CONFIG_STRING_RRH_GW_TX_SCHEDULING_ADVANCE, &tx_scheduling_advance) ) ) { - AssertError (0, parse_errors ++, + AssertFatal (0, "Failed to parse eNB configuration file %s, %u th enb %u the RRH GW address !\n", lib_config_file_name_pP, i, j); continue; // FIXME will prevent segfaults below, not sure what happens at function exit... @@ -2724,13 +2744,10 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) enb_properties.number = num_enb_properties; - AssertError (enb_properties_index == num_enb_properties, parse_errors ++, + AssertFatal (enb_properties_index == num_enb_properties, "Failed to parse eNB configuration file %s, mismatch between %u active eNBs and %u corresponding defined eNBs !\n", lib_config_file_name_pP, num_enb_properties, enb_properties_index); - AssertFatal (parse_errors == 0, - "Failed to parse eNB configuration file %s, found %d error%s !\n", - lib_config_file_name_pP, parse_errors, parse_errors > 1 ? "s" : ""); enb_config_display(); return &enb_properties; diff --git a/openair2/LAYER2/MAC/eNB_scheduler_primitives.c b/openair2/LAYER2/MAC/eNB_scheduler_primitives.c index 41f8d35327..9992e76150 100644 --- a/openair2/LAYER2/MAC/eNB_scheduler_primitives.c +++ b/openair2/LAYER2/MAC/eNB_scheduler_primitives.c @@ -75,7 +75,7 @@ void init_ue_sched_info(void) module_id_t i,j,k; for (i=0; i10000)] + poll_pdu = 4; + + # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)] + poll_byte = 99999; + + # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32] + max_retx_threshold = 4; + } + + # ------- SCTP definitions + SCTP : + { + # Number of streams to use in input/output + SCTP_INSTREAMS = 2; + SCTP_OUTSTREAMS = 2; + }; + + ////////// MME parameters: + mme_ip_address = ( { ipv4 = "192.168.12.171"; + ipv6 = "192:168:30::17"; + active = "yes"; + preference = "ipv4"; + } + ); + + NETWORK_INTERFACES : + { + ENB_INTERFACE_NAME_FOR_S1_MME = "eth0"; + ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.150/24"; + + ENB_INTERFACE_NAME_FOR_S1U = "eth0"; + ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.150/24"; + ENB_PORT_FOR_S1U = 2152; # Spec 2152 + }; + + log_config : + { + global_log_level ="info"; + global_log_verbosity ="medium"; + hw_log_level ="info"; + hw_log_verbosity ="medium"; + phy_log_level ="info"; + phy_log_verbosity ="medium"; + mac_log_level ="info"; + mac_log_verbosity ="high"; + rlc_log_level ="info"; + rlc_log_verbosity ="medium"; + pdcp_log_level ="info"; + pdcp_log_verbosity ="medium"; + rrc_log_level ="info"; + rrc_log_verbosity ="medium"; + }; + + } +); diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.100PRB.usrpx310.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.100PRB.usrpx310.conf new file mode 100644 index 0000000000..1954662a10 --- /dev/null +++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.100PRB.usrpx310.conf @@ -0,0 +1,171 @@ +Active_eNBs = ( "eNB_Eurecom_LTEBox"); +# Asn1_verbosity, choice in: none, info, annoying +Asn1_verbosity = "none"; + +eNBs = +( + { + ////////// Identification parameters: + eNB_ID = 0xe00; + + cell_type = "CELL_MACRO_ENB"; + + eNB_name = "eNB_Eurecom_LTEBox"; + + // Tracking area code, 0x0000 and 0xfffe are reserved values + tracking_area_code = "1"; + + mobile_country_code = "208"; + mobile_network_code = "92"; + + ////////// Physical parameters: + + component_carriers = ( + { + frame_type = "FDD"; + tdd_config = 3; + tdd_config_s = 0; + prefix_type = "NORMAL"; + eutra_band = 7; + downlink_frequency = 2660000000L; + uplink_frequency_offset = -120000000; + Nid_cell = 0; + N_RB_DL = 100; + Nid_cell_mbsfn = 0; + nb_antenna_ports = 2; + nb_antennas_tx = 2; + nb_antennas_rx = 2; + tx_gain = 32; + rx_gain = 116; + prach_root = 0; + prach_config_index = 0; + prach_high_speed = "DISABLE"; + prach_zero_correlation = 1; + prach_freq_offset = 2; + pucch_delta_shift = 1; + pucch_nRB_CQI = 1; + pucch_nCS_AN = 0; + pucch_n1_AN = 32; + pdsch_referenceSignalPower = -23; + pdsch_p_b = 0; + pusch_n_SB = 1; + pusch_enable64QAM = "DISABLE"; + pusch_hoppingMode = "interSubFrame"; + pusch_hoppingOffset = 0; + pusch_groupHoppingEnabled = "ENABLE"; + pusch_groupAssignment = 0; + pusch_sequenceHoppingEnabled = "DISABLE"; + pusch_nDMRS1 = 1; + phich_duration = "NORMAL"; + phich_resource = "ONESIXTH"; + srs_enable = "DISABLE"; + /* srs_BandwidthConfig =; + srs_SubframeConfig =; + srs_ackNackST =; + srs_MaxUpPts =;*/ + + pusch_p0_Nominal = -90; + pusch_alpha = "AL1"; + pucch_p0_Nominal = -108; + msg3_delta_Preamble = 6; + pucch_deltaF_Format1 = "deltaF2"; + pucch_deltaF_Format1b = "deltaF3"; + pucch_deltaF_Format2 = "deltaF0"; + pucch_deltaF_Format2a = "deltaF0"; + pucch_deltaF_Format2b = "deltaF0"; + + rach_numberOfRA_Preambles = 64; + rach_preamblesGroupAConfig = "DISABLE"; + /* + rach_sizeOfRA_PreamblesGroupA = ; + rach_messageSizeGroupA = ; + rach_messagePowerOffsetGroupB = ; + */ + rach_powerRampingStep = 4; + rach_preambleInitialReceivedTargetPower = -108; + rach_preambleTransMax = 10; + rach_raResponseWindowSize = 10; + rach_macContentionResolutionTimer = 48; + rach_maxHARQ_Msg3Tx = 4; + + pcch_default_PagingCycle = 128; + pcch_nB = "oneT"; + bcch_modificationPeriodCoeff = 2; + ue_TimersAndConstants_t300 = 1000; + ue_TimersAndConstants_t301 = 1000; + ue_TimersAndConstants_t310 = 1000; + ue_TimersAndConstants_t311 = 10000; + ue_TimersAndConstants_n310 = 20; + ue_TimersAndConstants_n311 = 2; + ue_TransmissionMode = 2; + } + ); + + + srb1_parameters : + { + # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500] + timer_poll_retransmit = 80; + + # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200] + timer_reordering = 35; + + # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500] + timer_status_prohibit = 0; + + # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)] + poll_pdu = 4; + + # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)] + poll_byte = 99999; + + # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32] + max_retx_threshold = 4; + } + + # ------- SCTP definitions + SCTP : + { + # Number of streams to use in input/output + SCTP_INSTREAMS = 2; + SCTP_OUTSTREAMS = 2; + }; + + ////////// MME parameters: + mme_ip_address = ( { ipv4 = "192.168.12.26"; + ipv6 = "192:168:30::17"; + active = "yes"; + preference = "ipv4"; + } + ); + + NETWORK_INTERFACES : + { + ENB_INTERFACE_NAME_FOR_S1_MME = "eth0"; + ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.111/24"; + + ENB_INTERFACE_NAME_FOR_S1U = "eth0"; + ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.111/24"; + ENB_PORT_FOR_S1U = 2152; # Spec 2152 + }; + + log_config : + { + global_log_level ="debug"; + global_log_verbosity ="medium"; + hw_log_level ="info"; + hw_log_verbosity ="medium"; + phy_log_level ="info"; + phy_log_verbosity ="medium"; + mac_log_level ="info"; + mac_log_verbosity ="high"; + rlc_log_level ="info"; + rlc_log_verbosity ="medium"; + pdcp_log_level ="info"; + pdcp_log_verbosity ="medium"; + rrc_log_level ="info"; + rrc_log_verbosity ="medium"; + }; + + } +); diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf new file mode 100644 index 0000000000..2d634a863b --- /dev/null +++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf @@ -0,0 +1,174 @@ +Active_eNBs = ( "eNB_Eurecom_LTEBox"); +# Asn1_verbosity, choice in: none, info, annoying +Asn1_verbosity = "none"; + +eNBs = +( + { + ////////// Identification parameters: + eNB_ID = 0xe00; + + cell_type = "CELL_MACRO_ENB"; + + eNB_name = "eNB_Eurecom_LTEBox"; + + // Tracking area code, 0x0000 and 0xfffe are reserved values + tracking_area_code = "1"; + + mobile_country_code = "208"; + + mobile_network_code = "94"; + + ////////// Physical parameters: + + component_carriers = ( + { + frame_type = "FDD"; + tdd_config = 3; + tdd_config_s = 0; + prefix_type = "NORMAL"; + eutra_band = 7; + downlink_frequency = 2680000000L; + uplink_frequency_offset = -120000000; + Nid_cell = 0; + N_RB_DL = 25; + Nid_cell_mbsfn = 0; + nb_antenna_ports = 2; + nb_antennas_tx = 2; + nb_antennas_rx = 2; + tx_gain = 90; + rx_gain = 125; + prach_root = 0; + prach_config_index = 0; + prach_high_speed = "DISABLE"; + prach_zero_correlation = 1; + prach_freq_offset = 2; + pucch_delta_shift = 1; + pucch_nRB_CQI = 1; + pucch_nCS_AN = 0; + pucch_n1_AN = 32; + pdsch_referenceSignalPower = -28; + pdsch_p_b = 0; + pusch_n_SB = 1; + pusch_enable64QAM = "DISABLE"; + pusch_hoppingMode = "interSubFrame"; + pusch_hoppingOffset = 0; + pusch_groupHoppingEnabled = "ENABLE"; + pusch_groupAssignment = 0; + pusch_sequenceHoppingEnabled = "DISABLE"; + pusch_nDMRS1 = 1; + phich_duration = "NORMAL"; + phich_resource = "ONESIXTH"; + srs_enable = "DISABLE"; + /* srs_BandwidthConfig =; + srs_SubframeConfig =; + srs_ackNackST =; + srs_MaxUpPts =;*/ + + pusch_p0_Nominal = -90; + pusch_alpha = "AL1"; + pucch_p0_Nominal = -96; + msg3_delta_Preamble = 6; + pucch_deltaF_Format1 = "deltaF2"; + pucch_deltaF_Format1b = "deltaF3"; + pucch_deltaF_Format2 = "deltaF0"; + pucch_deltaF_Format2a = "deltaF0"; + pucch_deltaF_Format2b = "deltaF0"; + + rach_numberOfRA_Preambles = 64; + rach_preamblesGroupAConfig = "DISABLE"; +/* + rach_sizeOfRA_PreamblesGroupA = ; + rach_messageSizeGroupA = ; + rach_messagePowerOffsetGroupB = ; +*/ + rach_powerRampingStep = 4; + rach_preambleInitialReceivedTargetPower = -108; + rach_preambleTransMax = 10; + rach_raResponseWindowSize = 10; + rach_macContentionResolutionTimer = 48; + rach_maxHARQ_Msg3Tx = 4; + + pcch_default_PagingCycle = 128; + pcch_nB = "oneT"; + bcch_modificationPeriodCoeff = 2; + ue_TimersAndConstants_t300 = 1000; + ue_TimersAndConstants_t301 = 1000; + ue_TimersAndConstants_t310 = 1000; + ue_TimersAndConstants_t311 = 10000; + ue_TimersAndConstants_n310 = 20; + ue_TimersAndConstants_n311 = 1; + + ue_TransmissionMode = 2; + + } + ); + + + srb1_parameters : + { + # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500] + timer_poll_retransmit = 80; + + # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200] + timer_reordering = 35; + + # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500] + timer_status_prohibit = 0; + + # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)] + poll_pdu = 4; + + # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)] + poll_byte = 99999; + + # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32] + max_retx_threshold = 4; + } + + # ------- SCTP definitions + SCTP : + { + # Number of streams to use in input/output + SCTP_INSTREAMS = 2; + SCTP_OUTSTREAMS = 2; + }; + + ////////// MME parameters: + mme_ip_address = ( { ipv4 = "192.168.12.171"; + ipv6 = "192:168:30::17"; + active = "yes"; + preference = "ipv4"; + } + ); + + NETWORK_INTERFACES : + { + ENB_INTERFACE_NAME_FOR_S1_MME = "eth0"; + ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.150/24"; + + ENB_INTERFACE_NAME_FOR_S1U = "eth0"; + ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.150/24"; + ENB_PORT_FOR_S1U = 2152; # Spec 2152 + }; + + log_config : + { + global_log_level ="info"; + global_log_verbosity ="medium"; + hw_log_level ="info"; + hw_log_verbosity ="medium"; + phy_log_level ="info"; + phy_log_verbosity ="medium"; + mac_log_level ="info"; + mac_log_verbosity ="high"; + rlc_log_level ="info"; + rlc_log_verbosity ="medium"; + pdcp_log_level ="info"; + pdcp_log_verbosity ="medium"; + rrc_log_level ="info"; + rrc_log_verbosity ="medium"; + }; + + } +); diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf new file mode 100644 index 0000000000..a68c65146f --- /dev/null +++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf @@ -0,0 +1,172 @@ +Active_eNBs = ( "eNB_Eurecom_LTEBox"); +# Asn1_verbosity, choice in: none, info, annoying +Asn1_verbosity = "none"; + +eNBs = +( + { + ////////// Identification parameters: + eNB_ID = 0xe00; + + cell_type = "CELL_MACRO_ENB"; + + eNB_name = "eNB_Eurecom_LTEBox"; + + // Tracking area code, 0x0000 and 0xfffe are reserved values + tracking_area_code = "1"; + + mobile_country_code = "208"; + mobile_network_code = "92"; + + ////////// Physical parameters: + + component_carriers = ( + { + frame_type = "FDD"; + tdd_config = 3; + tdd_config_s = 0; + prefix_type = "NORMAL"; + eutra_band = 7; + downlink_frequency = 2660000000L; + uplink_frequency_offset = -120000000; + Nid_cell = 0; + N_RB_DL = 25; + Nid_cell_mbsfn = 0; + nb_antenna_ports = 2; + nb_antennas_tx = 2; + nb_antennas_rx = 2; + tx_gain = 32; + rx_gain = 116; + prach_root = 0; + prach_config_index = 0; + prach_high_speed = "DISABLE"; + prach_zero_correlation = 1; + prach_freq_offset = 2; + pucch_delta_shift = 1; + pucch_nRB_CQI = 1; + pucch_nCS_AN = 0; + pucch_n1_AN = 32; + pdsch_referenceSignalPower = -18; + pdsch_p_b = 0; + pusch_n_SB = 1; + pusch_enable64QAM = "DISABLE"; + pusch_hoppingMode = "interSubFrame"; + pusch_hoppingOffset = 0; + pusch_groupHoppingEnabled = "ENABLE"; + pusch_groupAssignment = 0; + pusch_sequenceHoppingEnabled = "DISABLE"; + pusch_nDMRS1 = 1; + phich_duration = "NORMAL"; + phich_resource = "ONESIXTH"; + srs_enable = "DISABLE"; + /* srs_BandwidthConfig =; + srs_SubframeConfig =; + srs_ackNackST =; + srs_MaxUpPts =;*/ + + pusch_p0_Nominal = -90; + pusch_alpha = "AL1"; + pucch_p0_Nominal = -108; + msg3_delta_Preamble = 6; + pucch_deltaF_Format1 = "deltaF2"; + pucch_deltaF_Format1b = "deltaF3"; + pucch_deltaF_Format2 = "deltaF0"; + pucch_deltaF_Format2a = "deltaF0"; + pucch_deltaF_Format2b = "deltaF0"; + + rach_numberOfRA_Preambles = 64; + rach_preamblesGroupAConfig = "DISABLE"; + /* + rach_sizeOfRA_PreamblesGroupA = ; + rach_messageSizeGroupA = ; + rach_messagePowerOffsetGroupB = ; + */ + rach_powerRampingStep = 4; + rach_preambleInitialReceivedTargetPower = -108; + rach_preambleTransMax = 10; + rach_raResponseWindowSize = 10; + rach_macContentionResolutionTimer = 48; + rach_maxHARQ_Msg3Tx = 4; + + pcch_default_PagingCycle = 128; + pcch_nB = "oneT"; + bcch_modificationPeriodCoeff = 2; + ue_TimersAndConstants_t300 = 1000; + ue_TimersAndConstants_t301 = 1000; + ue_TimersAndConstants_t310 = 1000; + ue_TimersAndConstants_t311 = 10000; + ue_TimersAndConstants_n310 = 20; + ue_TimersAndConstants_n311 = 1; + + ue_TransmissionMode = 2; + } + ); + + + srb1_parameters : + { + # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500] + timer_poll_retransmit = 80; + + # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200] + timer_reordering = 35; + + # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500] + timer_status_prohibit = 0; + + # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)] + poll_pdu = 4; + + # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)] + poll_byte = 99999; + + # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32] + max_retx_threshold = 4; + } + + # ------- SCTP definitions + SCTP : + { + # Number of streams to use in input/output + SCTP_INSTREAMS = 2; + SCTP_OUTSTREAMS = 2; + }; + + ////////// MME parameters: + mme_ip_address = ( { ipv4 = "192.168.12.26"; + ipv6 = "192:168:30::17"; + active = "yes"; + preference = "ipv4"; + } + ); + + NETWORK_INTERFACES : + { + ENB_INTERFACE_NAME_FOR_S1_MME = "eth0"; + ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.111/24"; + + ENB_INTERFACE_NAME_FOR_S1U = "eth0"; + ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.111/24"; + ENB_PORT_FOR_S1U = 2152; # Spec 2152 + }; + + log_config : + { + global_log_level ="debug"; + global_log_verbosity ="medium"; + hw_log_level ="info"; + hw_log_verbosity ="medium"; + phy_log_level ="info"; + phy_log_verbosity ="medium"; + mac_log_level ="info"; + mac_log_verbosity ="high"; + rlc_log_level ="info"; + rlc_log_verbosity ="medium"; + pdcp_log_level ="info"; + pdcp_log_verbosity ="medium"; + rrc_log_level ="info"; + rrc_log_verbosity ="medium"; + }; + + } +);