maki/openairinterface5g
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

calibration (RX) for LimeSDR. Use of new API for RF gains.

Browse Source
This commit is contained in:
Raymond.Knopp
2017-03-09 02:43:31 +01:00
parent aefb958a6f
commit 4342595ea8
2 changed files with 20 additions and 20 deletions
Download Patch File Download Diff File Expand all files Collapse all files
targets/ARCH/LMSSDR/USERSPACE/LIB/lms_lib.cpp
+14 -14
View File
@@ -134,15 +134,15 @@ int trx_lms_set_gains(openair0_device* device, openair0_config_t *openair0_cfg)
int ret=0; int ret=0;
double rxg_ratio = openair0_cfg[0].rx_gain[0]/openair0_cfg[0].rx_gain_offset[0]; // double rxg_ratio = openair0_cfg[0].rx_gain[0]/openair0_cfg[0].rx_gain_offset[0];
if (rxg_ratio > 1) { if (openair0_cfg->rx_gain[0] > 70+openair0_cfg->rx_gain_offset[0]) {
printf("[LMS] Reduce RX Gain 0 by %f dB\n",openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0]); printf("[LMS] Reduce RX Gain 0 by %f dB\n",openair0_cfg->rx_gain[0]-openair0_cfg->rx_gain_offset[0]-70);
ret = -1; ret = -1;
rxg_ratio = 1; // rxg_ratio = 1;
} }
LMS_SetNormalizedGain(lms_device, LMS_CH_TX, 0, openair0_cfg[0].tx_gain[0]/100.0); LMS_SetGaindB(lms_device, LMS_CH_TX, 0, openair0_cfg->tx_gain[0]);
LMS_SetNormalizedGain(lms_device, LMS_CH_RX, 0, .8*rxg_ratio); LMS_SetGaindB(lms_device, LMS_CH_RX, 0, openair0_cfg->rx_gain[0]-openair0_cfg->rx_gain_offset[0]);
/* /*
// RX gains, use low-level setting // RX gains, use low-level setting
double gv = openair0_cfg[0].rx_gain[0] - openair0_cfg[0].rx_gain_offset[0]; double gv = openair0_cfg[0].rx_gain[0] - openair0_cfg[0].rx_gain_offset[0];
@@ -309,18 +309,18 @@ int trx_lms_set_freq(openair0_device* device, openair0_config_t *openair0_cfg,in
// V1.2 board // V1.2 board
rx_gain_calib_table_t calib_table_lmssdr_1v2[] = { rx_gain_calib_table_t calib_table_lmssdr_1v2[] = {
{3500000000.0,44.0}, // on L PAD {3500000000.0,44.0}, // on L PAD
{2660000000.0,62.0}, // on L PAD {2660000000.0,55.0}, // on L PAD
{2300000000.0,62.0}, // on L PAD {2300000000.0,54.0}, // on L PAD
{1880000000.0,64.0}, // on L PAD {1880000000.0,54.0}, // on L PAD
{816000000.0,79.0}, // on W PAD {816000000.0,79.0}, // on W PAD
{-1,0}}; {-1,0}};
// V1.4 board // V1.4 board
rx_gain_calib_table_t calib_table_lmssdr[] = { rx_gain_calib_table_t calib_table_lmssdr[] = {
{3500000000.0,97.0}, // on H PAD {3500000000.0,44.0}, // on H PAD
{2660000000.0,110.0}, // on H PAD {2660000000.0,55.0}, // on H PAD
{2300000000.0,106.0}, // on H PAD {2300000000.0,54.0}, // on H PAD
{1880000000.0,106.0}, // on H PAD {1880000000.0,54.0}, // on H PAD
{816000000.0,116.0}, // on W PAD {816000000.0,79.0}, // on L PAD
{-1,0}}; {-1,0}};
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band13.tm1.50PRB.lmssdr.conf
+6 -6
View File
@@ -40,7 +40,7 @@ eNBs =
nb_antennas_tx = 1; nb_antennas_tx = 1;
nb_antennas_rx = 1; nb_antennas_rx = 1;
tx_gain = 20; tx_gain = 20;
rx_gain = 116; rx_gain = 100;
prach_root = 0; prach_root = 0;
prach_config_index = 0; prach_config_index = 0;
prach_high_speed = "DISABLE"; prach_high_speed = "DISABLE";
@@ -136,7 +136,7 @@ eNBs =
}; };
////////// MME parameters: ////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.70"; mme_ip_address = ( { ipv4 = "127.0.0.3";
ipv6 = "192:168:30::17"; ipv6 = "192:168:30::17";
active = "yes"; active = "yes";
preference = "ipv4"; preference = "ipv4";
@@ -145,11 +145,11 @@ eNBs =
NETWORK_INTERFACES : NETWORK_INTERFACES :
{ {
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0"; ENB_INTERFACE_NAME_FOR_S1_MME = "lo";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.150/24"; ENB_IPV4_ADDRESS_FOR_S1_MME = "127.0.0.2/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth0"; ENB_INTERFACE_NAME_FOR_S1U = "lo";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.150/24"; ENB_IPV4_ADDRESS_FOR_S1U = "127.0.0.5/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152 ENB_PORT_FOR_S1U = 2152; # Spec 2152
}; };