maki/openairinterface5g
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

adding SA rfsim test

Browse Source
This commit is contained in:
hardy
2021-05-26 17:39:19 +02:00
parent c19ba39eaa
commit 44f7766a3d
2 changed files with 213 additions and 10 deletions
Download Patch File Download Diff File Expand all files Collapse all files
ci-scripts/runTestOnVM.sh
+137 -10
View File
@@ -277,6 +277,46 @@ function check_ping_result {
}
function check_sa_result {
local LOC_GNB_LOG=$1
local LOC_UE_LOG=$2
#if log files exist
if [ -f $LOC_GNB_LOG ] && [ -f $LOC_UE_LOG ]
then
#gNB SA test
#console check
echo "Checking gNB Log for SA success"
egrep "Received rrcSetupComplete" $1
egrep "Received Ack of RA-Msg4\. CBRA procedure succeeded" $1
#script check
local RRC_CHECK=`egrep -c "Received rrcSetupComplete" $1`
local CBRA_CHECK=`egrep -c "Received Ack of RA-Msg4\. CBRA procedure succeeded" $1`
#UE SA test
#console check
echo 'Checking UE Log for SA success'
egrep "SIB1 decoded" $2
#script check
local SIB1_CHECK=`egrep -c "SIB1 decoded" $2`
#generate status
if [ $RRC_CHECK -eq 0 ] || [ $CBRA_CHECK -eq 0 ] || [ $SIB1_CHECK -eq 0 ]
then
SA_STATUS=-1
echo "SA test FAILED, could not find the markers"
fi
#case where log files do not exist
else
echo "SA test log files not present"
SA_STATUS=-1
fi
}
function check_ra_result {
local LOC_GNB_LOG=$1
local LOC_UE_LOG=$2
@@ -1209,8 +1249,8 @@ function start_rf_sim_gnb {
local LOC_CONF_FILE=$5
# 1 is with S1 and 0 without S1 aka noS1
local LOC_S1_CONFIGURATION=$6
#LOC_RA_TEST=1 will run the RA test check
local LOC_RA_TEST=$7
#LOC_RA_SA_TEST=1 will run the RA test check ; =2 will run the SA test
local LOC_RA_SA_TEST=$7
if [ -e rbconfig.raw ]; then rm -f rbconfig.raw; fi
if [ -e reconfig.raw ]; then rm -f reconfig.raw; fi
@@ -1233,11 +1273,13 @@ function start_rf_sim_gnb {
echo "sudo rm -f r*config.raw" >> $1
if [ $LOC_S1_CONFIGURATION -eq 0 ]
then
if [ $LOC_RA_TEST -eq 0 ] #no RA test => use --phy-test option
if [ $LOC_RA_SA_TEST -eq 0 ] #no RA test => use --phy-test option
then
echo "echo \"./nr-softmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE --log_config.global_log_options level,nocolor --parallel-config PARALLEL_SINGLE_THREAD --noS1 --nokrnmod 1 --rfsim --phy-test --lowmem --noS1\" > ./my-nr-softmodem-run.sh " >> $1
else #RA test => use --do-ra option
elif [ $LOC_RA_SA_TEST -eq 1 ] #RA test => use --do-ra option
echo "echo \"./nr-softmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE --log_config.global_log_options level,nocolor --parallel-config PARALLEL_SINGLE_THREAD --rfsim --do-ra --lowmem --noS1\" > ./my-nr-softmodem-run.sh " >> $1
else #SA test => use --sa option
echo "echo \"./nr-softmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE --log_config.global_log_options level,nocolor --parallel-config PARALLEL_SINGLE_THREAD --rfsim --sa --lowmem \" > ./my-nr-softmodem-run.sh " >> $1
fi
fi
echo "chmod 775 ./my-nr-softmodem-run.sh" >> $1
@@ -1273,7 +1315,7 @@ function start_rf_sim_gnb {
fi
# check noS1 config only outside RA test (as it does not support noS1)
if [ $LOC_S1_CONFIGURATION -eq 0 ] && [ $LOC_RA_TEST -eq 0 ]
if [ $LOC_S1_CONFIGURATION -eq 0 ] && [ $LOC_RA_SA_TEST -eq 0 ]
then
echo "ifconfig oaitun_enb1 | egrep -c \"inet addr\"" > $1
# Checking oaitun_enb1 interface has now an IP address
@@ -1318,8 +1360,8 @@ function start_rf_sim_nr_ue {
local LOC_FREQUENCY=$6
# 1 is with S1 and 0 without S1 aka noS1
local LOC_S1_CONFIGURATION=$7
#LOC_RA_TEST=1 will run the RA test check
local LOC_RA_TEST=$8
#LOC_RA_SA_TEST=1 will run the RA test check ; =2 will run the SA test
local LOC_RA_SA_TEST=$8
# Copy the RAW files from the gNB run
scp -o StrictHostKeyChecking=no rbconfig.raw ubuntu@$LOC_NR_UE_VM_IP_ADDR:/home/ubuntu/tmp
@@ -1336,11 +1378,13 @@ function start_rf_sim_nr_ue {
echo "cd /home/ubuntu/tmp/cmake_targets/ran_build/build/" >> $1
if [ $LOC_S1_CONFIGURATION -eq 0 ]
then
if [ $LOC_RA_TEST -eq 0 ] #no RA test => use --phy-test option
if [ $LOC_RA_SA_TEST -eq 0 ] #no RA test => use --phy-test option
then
echo "echo \"./nr-uesoftmodem --nokrnmod 1 --rfsim --phy-test --rrc_config_path /home/ubuntu/tmp/cmake_targets/ran_build/build/ --log_config.global_log_options level,nocolor --noS1\" > ./my-nr-softmodem-run.sh " >> $1
else #RA test => use --do-ra option
elif [ $LOC_RA_SA_TEST -eq 1 ] #RA test => use --do-ra option
echo "echo \"./nr-uesoftmodem --rfsim --do-ra --log_config.global_log_options level,nocolor --rrc_config_path /home/ubuntu/tmp/cmake_targets/ran_build/build/\" > ./my-nr-softmodem-run.sh " >> $1
else #SA test => use --sa option
echo "echo \"./nr-uesoftmodem -r 106 --numerology 1 --band 78 -C 3619200000 --rfsim --sa --log_config.global_log_options level,nocolor\" > ./my-nr-softmodem-run.sh " >> $1
fi
fi
echo "chmod 775 ./my-nr-softmodem-run.sh" >> $1
@@ -1375,7 +1419,7 @@ function start_rf_sim_nr_ue {
echo "RF-SIM NR-UE is sync'ed w/ gNB"
fi
# Checking oaitun_ue1 interface has now an IP address (only outside RA test)
if [ $LOC_RA_TEST -eq 0 ]
if [ $LOC_RA_SA_TEST -eq 0 ]
then
i="0"
echo "ifconfig oaitun_ue1 | egrep -c \"inet addr\"" > $1
@@ -2189,6 +2233,88 @@ function run_test_on_vm {
if [[ "$RUN_OPTIONS" == "complex" ]] && [[ $VM_NAME =~ .*-rf-sim.* ]]
then
echo "############################################################"
echo "SA TEST"
echo "############################################################"
#SA test, attention : has a different config file from the rest of the test
CN_CONFIG="noS1"
CONF_FILE=gnb.sa.band78.fr1.106PRB.usrpb210.conf
S1_NOS1_CFG=0
PRB=106
FREQUENCY=3510
if [ ! -d $ARCHIVES_LOC ]
then
mkdir --parents $ARCHIVES_LOC
fi
local try_cnt=0
NR_STATUS=0
######### start of SA TEST loop
while [ $try_cnt -lt 5 ] #5 because it hardly succeed within CI
do
SYNC_STATUS=0
SA_STATUS=0
rm -f $ARCHIVES_LOC/tdd_${PRB}prb_${CN_CONFIG}*sa_test.log
echo "############################################################"
echo "${CN_CONFIG} : Starting the gNB"
echo "############################################################"
CURRENT_GNB_LOG_FILE=tdd_${PRB}prb_${CN_CONFIG}_gnb_sa_test.log
#last argument = 2 is to enable --sa for SA test
start_rf_sim_gnb $GNB_VM_CMDS "$GNB_VM_IP_ADDR" $CURRENT_GNB_LOG_FILE $PRB $CONF_FILE $S1_NOS1_CFG 2
echo "############################################################"
echo "${CN_CONFIG} : Starting the NR-UE"
echo "############################################################"
CURRENT_NR_UE_LOG_FILE=tdd_${PRB}prb_${CN_CONFIG}_ue_sa_test.log
#last argument = 2 is to enable --sa for SA test
start_rf_sim_nr_ue $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR $GNB_VM_IP_ADDR $CURRENT_NR_UE_LOG_FILE $PRB $FREQUENCY $S1_NOS1_CFG 2
if [ $NR_UE_SYNC -eq 0 ]
then
echo "Problem w/ gNB and NR-UE not syncing"
terminate_enb_ue_basic_sim $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR 2
terminate_enb_ue_basic_sim $GNB_VM_CMDS $GNB_VM_IP_ADDR 1
scp -o StrictHostKeyChecking=no ubuntu@$GNB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_GNB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$NR_UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_NR_UE_LOG_FILE $ARCHIVES_LOC
SYNC_STATUS=-1
try_cnt=$((try_cnt+1))
continue
fi
echo "############################################################"
echo "${CN_CONFIG} : Terminate gNB/NR-UE simulators"
echo "############################################################"
sleep 20
terminate_enb_ue_basic_sim $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR 2
terminate_enb_ue_basic_sim $GNB_VM_CMDS $GNB_VM_IP_ADDR 1
scp -o StrictHostKeyChecking=no ubuntu@$GNB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_GNB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$NR_UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_NR_UE_LOG_FILE $ARCHIVES_LOC
#check SA markers in gNB and NR UE log files
echo "############################################################"
echo "${CN_CONFIG} : Checking SA on gNB / NR-UE"
echo "############################################################"
# Proper check to be done when SA test is working!
check_sa_result $ARCHIVES_LOC/$CURRENT_GNB_LOG_FILE $ARCHIVES_LOC/$CURRENT_NR_UE_LOG_FILE
if [ $SA_STATUS -ne 0 ]
then
echo "SA test NOT OK"
echo "try_cnt = " $try_cnt
try_cnt=$((try_cnt+1))
else
try_cnt=$((try_cnt+10))
fi
done
########### end SA test
sleep 30
echo "############################################################"
echo "RA TEST FR2"
echo "############################################################"
@@ -2493,6 +2619,7 @@ function run_test_on_vm {
echo "Checking run status"
echo "############################################################"
if [ $SA_STATUS -ne 0 ]; then NR_STATUS=-1; fi
if [ $RA_FR2_STATUS -ne 0 ]; then NR_STATUS=-1; fi
if [ $RA_STATUS -ne 0 ]; then NR_STATUS=-1; fi
if [ $SYNC_STATUS -ne 0 ]; then NR_STATUS=-1; fi