Removed b66 NTN and enabled B254 NTN conf file in CI
This commit is contained in:
Raghavendra Dinavahi
committed by
Thomas Schlichter
Thomas Schlichter
parent
2b4ca7e47d
commit
48c8d67393
+8
-8
@@ -28,11 +28,11 @@ gNBs =
|
|||||||
|
|
||||||
# downlinkConfigCommon
|
# downlinkConfigCommon
|
||||||
#frequencyInfoDL
|
#frequencyInfoDL
|
||||||
# this is 2150.43 MHz + 14 PRBs@15kHz SCS (same as initial BWP), points to Subcarrier 0 of RB#10 of SSB block
|
# GSCN 6221
|
||||||
absoluteFrequencySSB = 430590;
|
absoluteFrequencySSB = 497770;
|
||||||
dl_frequencyBand = 66;
|
dl_frequencyBand = 254;
|
||||||
# this is 2150.43 MHz
|
# this is 2486.15 MHz
|
||||||
dl_absoluteFrequencyPointA = 430086;
|
dl_absoluteFrequencyPointA = 497230;
|
||||||
#scs-SpecificCarrierList
|
#scs-SpecificCarrierList
|
||||||
dl_offstToCarrier = 0;
|
dl_offstToCarrier = 0;
|
||||||
# subcarrierSpacing
|
# subcarrierSpacing
|
||||||
@@ -52,9 +52,9 @@ gNBs =
|
|||||||
|
|
||||||
#uplinkConfigCommon
|
#uplinkConfigCommon
|
||||||
#frequencyInfoUL
|
#frequencyInfoUL
|
||||||
ul_frequencyBand = 66;
|
ul_frequencyBand = 254;
|
||||||
# this is 1750.43 MHz
|
# this is 1612.65 MHz
|
||||||
ul_absoluteFrequencyPointA = 350086;
|
ul_absoluteFrequencyPointA = 322530;
|
||||||
#scs-SpecificCarrierList
|
#scs-SpecificCarrierList
|
||||||
ul_offstToCarrier = 0;
|
ul_offstToCarrier = 0;
|
||||||
# subcarrierSpacing
|
# subcarrierSpacing
|
||||||
@@ -86,7 +86,7 @@ services:
|
|||||||
cap_drop:
|
cap_drop:
|
||||||
- ALL
|
- ALL
|
||||||
environment:
|
environment:
|
||||||
USE_ADDITIONAL_OPTIONS: --rfsim --rfsimulator.prop_delay 238.74 --log_config.global_log_options level,nocolor,time
|
USE_ADDITIONAL_OPTIONS: --rfsim --log_config.global_log_options level,nocolor,time
|
||||||
ASAN_OPTIONS: detect_leaks=0
|
ASAN_OPTIONS: detect_leaks=0
|
||||||
depends_on:
|
depends_on:
|
||||||
- oai-ext-dn
|
- oai-ext-dn
|
||||||
@@ -94,7 +94,7 @@ services:
|
|||||||
public_net:
|
public_net:
|
||||||
ipv4_address: 192.168.71.140
|
ipv4_address: 192.168.71.140
|
||||||
volumes:
|
volumes:
|
||||||
- ../../conf_files/gnb.sa.band66.ntn.25prb.rfsim.conf:/opt/oai-gnb/etc/gnb.conf
|
- ../../conf_files/gnb.sa.band254.u0.25prb.rfsim.ntn.conf:/opt/oai-gnb/etc/gnb.conf
|
||||||
healthcheck:
|
healthcheck:
|
||||||
test: /bin/bash -c "pgrep nr-softmodem"
|
test: /bin/bash -c "pgrep nr-softmodem"
|
||||||
interval: 10s
|
interval: 10s
|
||||||
@@ -110,7 +110,7 @@ services:
|
|||||||
- NET_ADMIN # for interface bringup
|
- NET_ADMIN # for interface bringup
|
||||||
- NET_RAW # for ping
|
- NET_RAW # for ping
|
||||||
environment:
|
environment:
|
||||||
USE_ADDITIONAL_OPTIONS: --band 66 -C 2152680000 --CO -400000000 -r 25 --numerology 0 --ssb 48 --rfsim --rfsimulator.prop_delay 238.74 --rfsimulator.serveraddr 192.168.71.140 --log_config.global_log_options level,nocolor,time
|
USE_ADDITIONAL_OPTIONS: --band 254 -C 2488400000 --CO -873500000 -r 25 --numerology 0 --ssb 60 --rfsim --rfsimulator.prop_delay 238.74 --rfsimulator.serveraddr 192.168.71.140 --log_config.global_log_options level,nocolor,time
|
||||||
depends_on:
|
depends_on:
|
||||||
- oai-gnb
|
- oai-gnb
|
||||||
networks:
|
networks:
|
||||||
|
|||||||
@@ -1,280 +0,0 @@
|
|||||||
Active_gNBs = ( "5G-GOA-gNB");
|
|
||||||
# Asn1_verbosity, choice in: none, info, annoying
|
|
||||||
Asn1_verbosity = "none";
|
|
||||||
|
|
||||||
gNBs =
|
|
||||||
(
|
|
||||||
{
|
|
||||||
////////// Identification parameters:
|
|
||||||
gNB_ID = 0xe00;
|
|
||||||
gNB_name = "5G-GOA-gNB";
|
|
||||||
|
|
||||||
// Tracking area code, 0x0000 and 0xfffe are reserved values
|
|
||||||
tracking_area_code = 1;
|
|
||||||
plmn_list = ({ mcc = 208; mnc = 99; mnc_length = 2; snssaiList = ({ sst = 1, sd = 0xffffff }) });
|
|
||||||
nr_cellid = 12345678L;
|
|
||||||
|
|
||||||
////////// Physical parameters:
|
|
||||||
|
|
||||||
sib1_tda = 5;
|
|
||||||
min_rxtxtime = 6;
|
|
||||||
disable_harq = 1;
|
|
||||||
|
|
||||||
servingCellConfigCommon = (
|
|
||||||
{
|
|
||||||
#spCellConfigCommon
|
|
||||||
|
|
||||||
physCellId = 0;
|
|
||||||
|
|
||||||
# downlinkConfigCommon
|
|
||||||
#frequencyInfoDL
|
|
||||||
# GSCN 6221 = 497770, (GSCN 6215 - 497290)
|
|
||||||
absoluteFrequencySSB = 497770;
|
|
||||||
dl_frequencyBand = 254;
|
|
||||||
# this is 2486.9 MHz
|
|
||||||
dl_absoluteFrequencyPointA = 497380;
|
|
||||||
#scs-SpecificCarrierList
|
|
||||||
dl_offstToCarrier = 0;
|
|
||||||
# subcarrierSpacing
|
|
||||||
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
||||||
dl_subcarrierSpacing = 0;
|
|
||||||
dl_carrierBandwidth = 25;
|
|
||||||
#initialDownlinkBWP
|
|
||||||
#genericParameters
|
|
||||||
# this is RBstart=0,L=25 (275*(L-1))+RBstart
|
|
||||||
initialDLBWPlocationAndBandwidth = 6600;
|
|
||||||
# subcarrierSpacing
|
|
||||||
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
||||||
initialDLBWPsubcarrierSpacing = 0;
|
|
||||||
#pdcch-ConfigCommon
|
|
||||||
initialDLBWPcontrolResourceSetZero = 0;
|
|
||||||
initialDLBWPsearchSpaceZero = 0;
|
|
||||||
|
|
||||||
#uplinkConfigCommon
|
|
||||||
#frequencyInfoUL
|
|
||||||
ul_frequencyBand = 254;
|
|
||||||
# this is 1613.4 MHz
|
|
||||||
ul_absoluteFrequencyPointA = 322680;
|
|
||||||
#scs-SpecificCarrierList
|
|
||||||
ul_offstToCarrier = 0;
|
|
||||||
# subcarrierSpacing
|
|
||||||
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
||||||
ul_subcarrierSpacing = 0;
|
|
||||||
ul_carrierBandwidth = 25;
|
|
||||||
pMax = 20;
|
|
||||||
#initialUplinkBWP
|
|
||||||
#genericParameters
|
|
||||||
initialULBWPlocationAndBandwidth = 6600;
|
|
||||||
# subcarrierSpacing
|
|
||||||
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
||||||
initialULBWPsubcarrierSpacing = 0;
|
|
||||||
#rach-ConfigCommon
|
|
||||||
#rach-ConfigGeneric
|
|
||||||
prach_ConfigurationIndex = 98;
|
|
||||||
#prach_msg1_FDM
|
|
||||||
#0 = one, 1=two, 2=four, 3=eight
|
|
||||||
prach_msg1_FDM = 0;
|
|
||||||
prach_msg1_FrequencyStart = 0;
|
|
||||||
zeroCorrelationZoneConfig = 13;
|
|
||||||
preambleReceivedTargetPower = -118;
|
|
||||||
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
|
|
||||||
preambleTransMax = 6;
|
|
||||||
#powerRampingStep
|
|
||||||
# 0=dB0,1=dB2,2=dB4,3=dB6
|
|
||||||
powerRampingStep = 1;
|
|
||||||
#ra_ReponseWindow
|
|
||||||
#1,2,4,8,10,20,40,80
|
|
||||||
ra_ResponseWindow = 4;
|
|
||||||
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
|
|
||||||
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
|
|
||||||
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 4;
|
|
||||||
#one (0..15) 4,8,12,16,...60,64
|
|
||||||
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 15;
|
|
||||||
#ra_ContentionResolutionTimer
|
|
||||||
#(0..7) 8,16,24,32,40,48,56,64
|
|
||||||
ra_ContentionResolutionTimer = 7;
|
|
||||||
rsrp_ThresholdSSB = 19;
|
|
||||||
#prach-RootSequenceIndex_PR
|
|
||||||
#1 = 839, 2 = 139
|
|
||||||
prach_RootSequenceIndex_PR = 2;
|
|
||||||
prach_RootSequenceIndex = 1;
|
|
||||||
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
|
|
||||||
#
|
|
||||||
msg1_SubcarrierSpacing = 0;
|
|
||||||
# restrictedSetConfig
|
|
||||||
# 0=unrestricted, 1=restricted type A, 2=restricted type B
|
|
||||||
restrictedSetConfig = 0;
|
|
||||||
|
|
||||||
msg3_DeltaPreamble = 1;
|
|
||||||
p0_NominalWithGrant =-90;
|
|
||||||
|
|
||||||
# pucch-ConfigCommon setup :
|
|
||||||
# pucchGroupHopping
|
|
||||||
# 0 = neither, 1= group hopping, 2=sequence hopping
|
|
||||||
pucchGroupHopping = 0;
|
|
||||||
hoppingId = 40;
|
|
||||||
p0_nominal = -90;
|
|
||||||
|
|
||||||
ssb_PositionsInBurst_Bitmap = 1;
|
|
||||||
|
|
||||||
# ssb_periodicityServingCell
|
|
||||||
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
|
|
||||||
ssb_periodicityServingCell = 2;
|
|
||||||
|
|
||||||
# dmrs_TypeA_position
|
|
||||||
# 0 = pos2, 1 = pos3
|
|
||||||
dmrs_TypeA_Position = 0;
|
|
||||||
|
|
||||||
# subcarrierSpacing
|
|
||||||
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
||||||
subcarrierSpacing = 0;
|
|
||||||
|
|
||||||
|
|
||||||
#tdd-UL-DL-ConfigurationCommon
|
|
||||||
# subcarrierSpacing
|
|
||||||
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
|
||||||
referenceSubcarrierSpacing = 0;
|
|
||||||
# pattern1
|
|
||||||
# dl_UL_TransmissionPeriodicity
|
|
||||||
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
|
|
||||||
dl_UL_TransmissionPeriodicity = 6;
|
|
||||||
nrofDownlinkSlots = 7;
|
|
||||||
nrofDownlinkSymbols = 6;
|
|
||||||
nrofUplinkSlots = 2;
|
|
||||||
nrofUplinkSymbols = 4;
|
|
||||||
|
|
||||||
ssPBCH_BlockPower = -25;
|
|
||||||
|
|
||||||
#ext2
|
|
||||||
#ntn_Config_r17
|
|
||||||
cellSpecificKoffset_r17 = 478; //GEO
|
|
||||||
ta-Common-r17 = 58629666; # 238.74 ms
|
|
||||||
positionX-r17 = 0;
|
|
||||||
positionY-r17 = 0;
|
|
||||||
positionZ-r17 = 32433846;
|
|
||||||
velocityVX-r17 = 0;
|
|
||||||
velocityVY-r17 = 0;
|
|
||||||
velocityVZ-r17 = 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
);
|
|
||||||
|
|
||||||
TIMERS :
|
|
||||||
{
|
|
||||||
sr_ProhibitTimer = 0;
|
|
||||||
sr_TransMax = 64;
|
|
||||||
sr_ProhibitTimer_v1700 = 512;
|
|
||||||
t300 = 2000;
|
|
||||||
t301 = 2000;
|
|
||||||
t319 = 2000;
|
|
||||||
};
|
|
||||||
|
|
||||||
# ------- SCTP definitions
|
|
||||||
SCTP :
|
|
||||||
{
|
|
||||||
# Number of streams to use in input/output
|
|
||||||
SCTP_INSTREAMS = 2;
|
|
||||||
SCTP_OUTSTREAMS = 2;
|
|
||||||
};
|
|
||||||
|
|
||||||
|
|
||||||
////////// AMF parameters:
|
|
||||||
amf_ip_address = ({ ipv4 = "192.168.71.132"; });
|
|
||||||
|
|
||||||
NETWORK_INTERFACES :
|
|
||||||
{
|
|
||||||
GNB_IPV4_ADDRESS_FOR_NG_AMF = "192.168.71.140/26";
|
|
||||||
GNB_IPV4_ADDRESS_FOR_NGU = "192.168.71.140/26";
|
|
||||||
GNB_PORT_FOR_S1U = 2152; # Spec 2152
|
|
||||||
};
|
|
||||||
|
|
||||||
}
|
|
||||||
);
|
|
||||||
|
|
||||||
MACRLCs = (
|
|
||||||
{
|
|
||||||
num_cc = 1;
|
|
||||||
tr_s_preference = "local_L1";
|
|
||||||
tr_n_preference = "local_RRC";
|
|
||||||
pusch_TargetSNRx10 = 150;
|
|
||||||
pucch_TargetSNRx10 = 200;
|
|
||||||
}
|
|
||||||
);
|
|
||||||
|
|
||||||
L1s = (
|
|
||||||
{
|
|
||||||
num_cc = 1;
|
|
||||||
tr_n_preference = "local_mac";
|
|
||||||
prach_dtx_threshold = 120;
|
|
||||||
pucch0_dtx_threshold = 150;
|
|
||||||
ofdm_offset_divisor = 8; #set this to UINT_MAX for offset 0
|
|
||||||
}
|
|
||||||
);
|
|
||||||
|
|
||||||
RUs = (
|
|
||||||
{
|
|
||||||
local_rf = "yes";
|
|
||||||
nb_tx = 1;
|
|
||||||
nb_rx = 1;
|
|
||||||
att_tx = 0;
|
|
||||||
att_rx = 0;
|
|
||||||
bands = [7];
|
|
||||||
max_pdschReferenceSignalPower = -27;
|
|
||||||
max_rxgain = 114;
|
|
||||||
sf_extension = 0;
|
|
||||||
eNB_instances = [0];
|
|
||||||
sdr_addrs = "type=x300";
|
|
||||||
clock_src = "internal";
|
|
||||||
# if_freq = 3700000000L;
|
|
||||||
# if_offset = 1000000;
|
|
||||||
}
|
|
||||||
);
|
|
||||||
|
|
||||||
THREAD_STRUCT = (
|
|
||||||
{
|
|
||||||
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
|
|
||||||
parallel_config = "PARALLEL_RU_L1_TRX_SPLIT";
|
|
||||||
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
|
|
||||||
worker_config = "WORKER_DISABLE";
|
|
||||||
}
|
|
||||||
);
|
|
||||||
|
|
||||||
rfsimulator :
|
|
||||||
{
|
|
||||||
serveraddr = "server";
|
|
||||||
serverport = 4043;
|
|
||||||
options = (); #("saviq"); or/and "chanmod"
|
|
||||||
modelname = "AWGN";
|
|
||||||
IQfile = "/tmp/rfsimulator.iqs";
|
|
||||||
};
|
|
||||||
|
|
||||||
security = {
|
|
||||||
# preferred ciphering algorithms
|
|
||||||
# the first one of the list that an UE supports in chosen
|
|
||||||
# valid values: nea0, nea1, nea2, nea3
|
|
||||||
ciphering_algorithms = ( "nea0" );
|
|
||||||
|
|
||||||
# preferred integrity algorithms
|
|
||||||
# the first one of the list that an UE supports in chosen
|
|
||||||
# valid values: nia0, nia1, nia2, nia3
|
|
||||||
integrity_algorithms = ( "nia2", "nia0" );
|
|
||||||
|
|
||||||
# setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
|
|
||||||
# what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
|
|
||||||
drb_ciphering = "yes";
|
|
||||||
drb_integrity = "no";
|
|
||||||
};
|
|
||||||
|
|
||||||
log_config :
|
|
||||||
{
|
|
||||||
global_log_level ="info";
|
|
||||||
hw_log_level ="info";
|
|
||||||
phy_log_level ="info";
|
|
||||||
mac_log_level ="info";
|
|
||||||
rlc_log_level ="info";
|
|
||||||
pdcp_log_level ="info";
|
|
||||||
rrc_log_level ="info";
|
|
||||||
ngap_log_level ="debug";
|
|
||||||
f1ap_log_level ="debug";
|
|
||||||
};
|
|
||||||
|
|
||||||
Reference in New Issue
Block a user