From 4c9aaba54a87e81a6d702ffd4ed8549f279d6314 Mon Sep 17 00:00:00 2001 From: Robert Schmidt Date: Mon, 16 Feb 2026 17:25:25 +0100 Subject: [PATCH] Remove NSA from instructions: already covered elsewhere --- doc/RUNMODEM.md | 21 +++------------------ doc/TESTING_OAI_NSA_COTS_UE.md | 6 ++++-- 2 files changed, 7 insertions(+), 20 deletions(-) diff --git a/doc/RUNMODEM.md b/doc/RUNMODEM.md index 2cb7ff6fb9..e5adde0010 100644 --- a/doc/RUNMODEM.md +++ b/doc/RUNMODEM.md @@ -55,25 +55,10 @@ OAI supports different radio heads, the following are tested in the CI: ## 5G NR -### NSA setup with COTS UE +### NSA setup -This setup requires an EPC, an OAI eNB and gNB, and a COTS Phone. A dedicated page describe the setup can be found [here](https://gitlab.eurecom.fr/oai/openairinterface5g/wikis/home/gNB-COTS-UE-testing). -The `--nsa` flag must be used to run gNB in non-standalone mode. - - -#### Launch eNB - -```bash -sudo ./lte-softmodem -O ../../../targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50prb.usrpb210.conf -``` - -#### Launch gNB - -```bash -sudo ./nr-softmodem -O ../../../targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.tm1.106PRB.usrpn300.conf --nsa -``` - -You should see the X2 messages in Wireshark and at the eNB. +Please refer to the [corresponding page](./TESTING_OAI_NSA_COTS_UE.md) for more +information on how to run in NSA mode: ### SA setup with OAI NR-UE diff --git a/doc/TESTING_OAI_NSA_COTS_UE.md b/doc/TESTING_OAI_NSA_COTS_UE.md index cf4552ebba..6608eddde6 100644 --- a/doc/TESTING_OAI_NSA_COTS_UE.md +++ b/doc/TESTING_OAI_NSA_COTS_UE.md @@ -1,8 +1,9 @@ -STATUS 2020/10/15 : added External Resources section and links +# How to run an NSA setup with eNB/gNB -**Table of Contents** +This page details how to run an non-standalone (NSA) setup, using an eNB and +gNB (both OAI). It might be outdated, but still contains valuable information. [[_TOC_]] @@ -227,6 +228,7 @@ Execute: ``` +You should see the X2 messages in Wireshark and at the eNB. ## Test Case