CI: adding a TDD scenario for basic-simulator
Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>
This commit is contained in:
Raphael Defosseux
@@ -0,0 +1,229 @@
|
|||||||
|
Active_eNBs = ( "eNB_Eurecom_LTEBox");
|
||||||
|
# Asn1_verbosity, choice in: none, info, annoying
|
||||||
|
Asn1_verbosity = "none";
|
||||||
|
|
||||||
|
eNBs =
|
||||||
|
(
|
||||||
|
{
|
||||||
|
////////// Identification parameters:
|
||||||
|
eNB_ID = 0xe00;
|
||||||
|
|
||||||
|
cell_type = "CELL_MACRO_ENB";
|
||||||
|
|
||||||
|
eNB_name = "eNB_Eurecom_LTEBox";
|
||||||
|
|
||||||
|
// Tracking area code, 0x0000 and 0xfffe are reserved values
|
||||||
|
tracking_area_code = "1";
|
||||||
|
|
||||||
|
mobile_country_code = "208";
|
||||||
|
mobile_network_code = "93";
|
||||||
|
|
||||||
|
////////// Physical parameters:
|
||||||
|
|
||||||
|
component_carriers = (
|
||||||
|
{
|
||||||
|
node_function = "eNodeB_3GPP";
|
||||||
|
node_timing = "synch_to_ext_device";
|
||||||
|
node_synch_ref = 0;
|
||||||
|
frame_type = "TDD";
|
||||||
|
tdd_config = 1;
|
||||||
|
tdd_config_s = 0;
|
||||||
|
prefix_type = "NORMAL";
|
||||||
|
eutra_band = 40;
|
||||||
|
downlink_frequency = 2350000000L;
|
||||||
|
uplink_frequency_offset = 0;
|
||||||
|
Nid_cell = 0;
|
||||||
|
N_RB_DL = 25;
|
||||||
|
Nid_cell_mbsfn = 0;
|
||||||
|
nb_antenna_ports = 1;
|
||||||
|
nb_antennas_tx = 1;
|
||||||
|
nb_antennas_rx = 1;
|
||||||
|
tx_gain = 90;
|
||||||
|
rx_gain = 125;
|
||||||
|
prach_root = 0;
|
||||||
|
prach_config_index = 0;
|
||||||
|
prach_high_speed = "DISABLE";
|
||||||
|
prach_zero_correlation = 1;
|
||||||
|
prach_freq_offset = 2;
|
||||||
|
pucch_delta_shift = 1;
|
||||||
|
pucch_nRB_CQI = 1;
|
||||||
|
pucch_nCS_AN = 0;
|
||||||
|
pucch_n1_AN = 0;
|
||||||
|
pdsch_referenceSignalPower =-27;
|
||||||
|
pdsch_p_b = 0;
|
||||||
|
pusch_n_SB = 1;
|
||||||
|
pusch_enable64QAM = "DISABLE";
|
||||||
|
pusch_hoppingMode = "interSubFrame";
|
||||||
|
pusch_hoppingOffset = 0;
|
||||||
|
pusch_groupHoppingEnabled = "ENABLE";
|
||||||
|
pusch_groupAssignment = 0;
|
||||||
|
pusch_sequenceHoppingEnabled = "DISABLE";
|
||||||
|
pusch_nDMRS1 = 1;
|
||||||
|
phich_duration = "NORMAL";
|
||||||
|
phich_resource = "ONESIXTH";
|
||||||
|
srs_enable = "DISABLE";
|
||||||
|
/* srs_BandwidthConfig =;
|
||||||
|
srs_SubframeConfig =;
|
||||||
|
srs_ackNackST =;
|
||||||
|
srs_MaxUpPts =;*/
|
||||||
|
|
||||||
|
pusch_p0_Nominal = -96;
|
||||||
|
pusch_alpha = "AL1";
|
||||||
|
pucch_p0_Nominal = -106;
|
||||||
|
msg3_delta_Preamble = 6;
|
||||||
|
pucch_deltaF_Format1 = "deltaF2";
|
||||||
|
pucch_deltaF_Format1b = "deltaF3";
|
||||||
|
pucch_deltaF_Format2 = "deltaF0";
|
||||||
|
pucch_deltaF_Format2a = "deltaF0";
|
||||||
|
pucch_deltaF_Format2b = "deltaF0";
|
||||||
|
|
||||||
|
rach_numberOfRA_Preambles = 64;
|
||||||
|
rach_preamblesGroupAConfig = "DISABLE";
|
||||||
|
/*
|
||||||
|
rach_sizeOfRA_PreamblesGroupA = ;
|
||||||
|
rach_messageSizeGroupA = ;
|
||||||
|
rach_messagePowerOffsetGroupB = ;
|
||||||
|
*/
|
||||||
|
rach_powerRampingStep = 4;
|
||||||
|
rach_preambleInitialReceivedTargetPower = -108;
|
||||||
|
rach_preambleTransMax = 10;
|
||||||
|
rach_raResponseWindowSize = 10;
|
||||||
|
rach_macContentionResolutionTimer = 48;
|
||||||
|
rach_maxHARQ_Msg3Tx = 4;
|
||||||
|
|
||||||
|
pcch_default_PagingCycle = 128;
|
||||||
|
pcch_nB = "oneT";
|
||||||
|
bcch_modificationPeriodCoeff = 2;
|
||||||
|
ue_TimersAndConstants_t300 = 1000;
|
||||||
|
ue_TimersAndConstants_t301 = 1000;
|
||||||
|
ue_TimersAndConstants_t310 = 1000;
|
||||||
|
ue_TimersAndConstants_t311 = 10000;
|
||||||
|
ue_TimersAndConstants_n310 = 20;
|
||||||
|
ue_TimersAndConstants_n311 = 1;
|
||||||
|
|
||||||
|
ue_TransmissionMode = 1;
|
||||||
|
}
|
||||||
|
);
|
||||||
|
|
||||||
|
|
||||||
|
srb1_parameters :
|
||||||
|
{
|
||||||
|
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
|
||||||
|
timer_poll_retransmit = 80;
|
||||||
|
|
||||||
|
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
|
||||||
|
timer_reordering = 35;
|
||||||
|
|
||||||
|
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
|
||||||
|
timer_status_prohibit = 0;
|
||||||
|
|
||||||
|
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
|
||||||
|
poll_pdu = 4;
|
||||||
|
|
||||||
|
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
|
||||||
|
poll_byte = 99999;
|
||||||
|
|
||||||
|
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
|
||||||
|
max_retx_threshold = 4;
|
||||||
|
}
|
||||||
|
|
||||||
|
# ------- SCTP definitions
|
||||||
|
SCTP :
|
||||||
|
{
|
||||||
|
# Number of streams to use in input/output
|
||||||
|
SCTP_INSTREAMS = 2;
|
||||||
|
SCTP_OUTSTREAMS = 2;
|
||||||
|
};
|
||||||
|
|
||||||
|
////////// MME parameters:
|
||||||
|
mme_ip_address = ( { ipv4 = "CI_MME_IP_ADDR";
|
||||||
|
ipv6 = "192:168:30::17";
|
||||||
|
active = "yes";
|
||||||
|
preference = "ipv4";
|
||||||
|
}
|
||||||
|
);
|
||||||
|
|
||||||
|
NETWORK_INTERFACES :
|
||||||
|
{
|
||||||
|
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
|
||||||
|
ENB_IPV4_ADDRESS_FOR_S1_MME = "CI_ENB_IP_ADDR";
|
||||||
|
|
||||||
|
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
|
||||||
|
ENB_IPV4_ADDRESS_FOR_S1U = "CI_ENB_IP_ADDR";
|
||||||
|
ENB_PORT_FOR_S1U = 2152; # Spec 2152
|
||||||
|
|
||||||
|
ENB_IPV4_ADDRESS_FOR_X2C = "CI_ENB_IP_ADDR";
|
||||||
|
ENB_PORT_FOR_X2C = 36422; # Spec 36422
|
||||||
|
};
|
||||||
|
|
||||||
|
log_config :
|
||||||
|
{
|
||||||
|
global_log_level ="debug";
|
||||||
|
global_log_verbosity ="medium";
|
||||||
|
hw_log_level ="info";
|
||||||
|
hw_log_verbosity ="medium";
|
||||||
|
phy_log_level ="info";
|
||||||
|
phy_log_verbosity ="medium";
|
||||||
|
mac_log_level ="info";
|
||||||
|
mac_log_verbosity ="high";
|
||||||
|
rlc_log_level ="info";
|
||||||
|
rlc_log_verbosity ="medium";
|
||||||
|
pdcp_log_level ="info";
|
||||||
|
pdcp_log_verbosity ="medium";
|
||||||
|
rrc_log_level ="info";
|
||||||
|
rrc_log_verbosity ="medium";
|
||||||
|
};
|
||||||
|
|
||||||
|
}
|
||||||
|
);
|
||||||
|
MACRLCs = (
|
||||||
|
{
|
||||||
|
num_cc = 1;
|
||||||
|
tr_s_preference = "local_L1";
|
||||||
|
tr_n_preference = "local_RRC";
|
||||||
|
scheduler_mode = "fairRR";
|
||||||
|
puSch10xSnr = 200;
|
||||||
|
puCch10xSnr = 200;
|
||||||
|
}
|
||||||
|
);
|
||||||
|
|
||||||
|
L1s = (
|
||||||
|
{
|
||||||
|
num_cc = 1;
|
||||||
|
tr_n_preference = "local_mac";
|
||||||
|
}
|
||||||
|
);
|
||||||
|
|
||||||
|
RUs = (
|
||||||
|
{
|
||||||
|
local_rf = "yes"
|
||||||
|
nb_tx = 1
|
||||||
|
nb_rx = 1
|
||||||
|
att_tx = 0
|
||||||
|
att_rx = 0;
|
||||||
|
bands = [38];
|
||||||
|
max_pdschReferenceSignalPower = -27;
|
||||||
|
max_rxgain = 125;
|
||||||
|
eNB_instances = [0];
|
||||||
|
|
||||||
|
}
|
||||||
|
);
|
||||||
|
|
||||||
|
THREAD_STRUCT = (
|
||||||
|
{
|
||||||
|
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
|
||||||
|
parallel_config = "PARALLEL_SINGLE_THREAD";
|
||||||
|
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
|
||||||
|
worker_config = "WORKER_ENABLE";
|
||||||
|
}
|
||||||
|
);
|
||||||
|
|
||||||
|
NETWORK_CONTROLLER :
|
||||||
|
{
|
||||||
|
FLEXRAN_ENABLED = "no";
|
||||||
|
FLEXRAN_INTERFACE_NAME = "lo";
|
||||||
|
FLEXRAN_IPV4_ADDRESS = "127.0.0.1";
|
||||||
|
FLEXRAN_PORT = 2210;
|
||||||
|
FLEXRAN_CACHE = "/mnt/oai_agent_cache";
|
||||||
|
FLEXRAN_AWAIT_RECONF = "no";
|
||||||
|
};
|
||||||
+173
-169
@@ -317,188 +317,192 @@ then
|
|||||||
echo " <th>Statistics</th>" >> ./test_simulator_results.html
|
echo " <th>Statistics</th>" >> ./test_simulator_results.html
|
||||||
echo " </tr>" >> ./test_simulator_results.html
|
echo " </tr>" >> ./test_simulator_results.html
|
||||||
|
|
||||||
|
TRANS_MODES=("fdd" "tdd")
|
||||||
BW_CASES=(05 10 20)
|
BW_CASES=(05 10 20)
|
||||||
for BW in ${BW_CASES[@]}
|
for TMODE in ${TRANS_MODES[@]}
|
||||||
do
|
do
|
||||||
ENB_LOG=$ARCHIVES_LOC/enb_${BW}MHz.log
|
for BW in ${BW_CASES[@]}
|
||||||
UE_LOG=`echo $ENB_LOG | sed -e "s#enb#ue#"`
|
do
|
||||||
if [ -f $ENB_LOG ] && [ -f $UE_LOG ]
|
ENB_LOG=$ARCHIVES_LOC/${TMODE}_${BW}MHz_enb.log
|
||||||
then
|
UE_LOG=`echo $ENB_LOG | sed -e "s#enb#ue#"`
|
||||||
NAME_ENB=`echo $ENB_LOG | sed -e "s#$ARCHIVES_LOC/##"`
|
if [ -f $ENB_LOG ] && [ -f $UE_LOG ]
|
||||||
NAME_UE=`echo $UE_LOG | sed -e "s#$ARCHIVES_LOC/##"`
|
|
||||||
echo " <tr>" >> ./test_simulator_results.html
|
|
||||||
echo " <td>$NAME_ENB --- $NAME_UE</td>" >> ./test_simulator_results.html
|
|
||||||
echo " <td>N/A</td>" >> ./test_simulator_results.html
|
|
||||||
NB_ENB_GOT_SYNC=`egrep -c "got sync" $ENB_LOG`
|
|
||||||
NB_UE_GOT_SYNC=`egrep -c "got sync" $UE_LOG`
|
|
||||||
NB_ENB_SYNCED_WITH_UE=`egrep -c "got UE capabilities for UE" $ENB_LOG`
|
|
||||||
if [ $NB_ENB_GOT_SYNC -eq 1 ] && [ $NB_UE_GOT_SYNC -eq 2 ] && [ $NB_ENB_SYNCED_WITH_UE -eq 1 ]
|
|
||||||
then
|
then
|
||||||
echo " <td bgcolor = \"green\" >OK</td>" >> ./test_simulator_results.html
|
NAME_ENB=`echo $ENB_LOG | sed -e "s#$ARCHIVES_LOC/##"`
|
||||||
else
|
NAME_UE=`echo $UE_LOG | sed -e "s#$ARCHIVES_LOC/##"`
|
||||||
echo " <td bgcolor = \"red\" >OK</td>" >> ./test_simulator_results.html
|
echo " <tr>" >> ./test_simulator_results.html
|
||||||
fi
|
echo " <td>$NAME_ENB --- $NAME_UE</td>" >> ./test_simulator_results.html
|
||||||
echo " <td><pre>" >> ./test_simulator_results.html
|
|
||||||
if [ $NB_ENB_GOT_SYNC -eq 1 ]
|
|
||||||
then
|
|
||||||
echo "<font color = \"blue\">- eNB --> got sync</font>" >> ./test_simulator_results.html
|
|
||||||
else
|
|
||||||
echo "<font color = \"red\"><b>- eNB NEVER got sync</b></font>" >> ./test_simulator_results.html
|
|
||||||
fi
|
|
||||||
if [ $NB_UE_GOT_SYNC -eq 2 ]
|
|
||||||
then
|
|
||||||
echo "<font color = \"blue\">- UE --> got sync</font>" >> ./test_simulator_results.html
|
|
||||||
else
|
|
||||||
echo "<font color = \"red\"><b>- UE NEVER got sync</b></font>" >> ./test_simulator_results.html
|
|
||||||
fi
|
|
||||||
if [ $NB_ENB_SYNCED_WITH_UE -eq 1 ]
|
|
||||||
then
|
|
||||||
echo "<font color = \"blue\">- UE attached to eNB</font>" >> ./test_simulator_results.html
|
|
||||||
else
|
|
||||||
echo "<font color = \"red\"><b>- UE NEVER attached to eNB</b></font>" >> ./test_simulator_results.html
|
|
||||||
fi
|
|
||||||
NB_SEGFAULT_ENB=`egrep -i -c "Segmentation Fault" $ENB_LOG`
|
|
||||||
if [ $NB_SEGFAULT_ENB -ne 0 ]
|
|
||||||
then
|
|
||||||
echo "<font color = \"red\"><b>- eNB --> Segmentation Fault</b></font>" >> ./test_simulator_results.html
|
|
||||||
fi
|
|
||||||
NB_SEGFAULT_UE=`egrep -i -c "Segmentation Fault" $UE_LOG`
|
|
||||||
if [ $NB_SEGFAULT_UE -ne 0 ]
|
|
||||||
then
|
|
||||||
echo "<font color = \"red\"><b>- UE --> Segmentation Fault</b></font>" >> ./test_simulator_results.html
|
|
||||||
fi
|
|
||||||
NB_ASSERTION_ENB=`egrep -i -c "Assertion" $ENB_LOG`
|
|
||||||
if [ $NB_ASSERTION_ENB -ne 0 ]
|
|
||||||
then
|
|
||||||
echo "<font color = \"red\"><b>- eNB --> Assertion</b></font>" >> ./test_simulator_results.html
|
|
||||||
awk 'BEGIN{assertion=10}{if(assertion < 3){print " " $0; assertion++};if ($0 ~/Assertion/){print " " $0;assertion=1}}END{}' $ENB_LOG >> ./test_simulator_results.html
|
|
||||||
fi
|
|
||||||
NB_ASSERTION_UE=`egrep -i -c "Assertion" $UE_LOG`
|
|
||||||
if [ $NB_ASSERTION_UE -ne 0 ]
|
|
||||||
then
|
|
||||||
echo "<font color = \"red\"><b>- eNB --> Assertion</b></font>" >> ./test_simulator_results.html
|
|
||||||
awk 'BEGIN{assertion=10}{if(assertion < 3){print " " $0; assertion++};if ($0 ~/Assertion/){print " " $0;assertion=1}}END{}' $UE_LOG >> ./test_simulator_results.html
|
|
||||||
fi
|
|
||||||
echo " </pre></td>" >> ./test_simulator_results.html
|
|
||||||
echo " </tr>" >> ./test_simulator_results.html
|
|
||||||
fi
|
|
||||||
PING_CASE=$ARCHIVES_LOC/${BW}MHz_ping_ue.txt
|
|
||||||
if [ -f $PING_CASE ]
|
|
||||||
then
|
|
||||||
echo " <tr>" >> ./test_simulator_results.html
|
|
||||||
NAME=`echo $PING_CASE | sed -e "s#$ARCHIVES_LOC/##"`
|
|
||||||
echo " <td>$NAME</td>" >> ./test_simulator_results.html
|
|
||||||
CMD=`egrep "COMMAND IS" $PING_CASE | sed -e "s#COMMAND IS: ##"`
|
|
||||||
echo " <td>$CMD</td>" >> ./test_simulator_results.html
|
|
||||||
FILE_COMPLETE=`egrep -c "ping statistics" $PING_CASE`
|
|
||||||
if [ $FILE_COMPLETE -eq 0 ]
|
|
||||||
then
|
|
||||||
echo " <td bgcolor = \"red\" >KO</td>" >> ./test_simulator_results.html
|
|
||||||
echo " <td>N/A</td>" >> ./test_simulator_results.html
|
echo " <td>N/A</td>" >> ./test_simulator_results.html
|
||||||
else
|
NB_ENB_GOT_SYNC=`egrep -c "got sync" $ENB_LOG`
|
||||||
NB_TR_PACKETS=`egrep "packets transmitted" $PING_CASE | sed -e "s# packets transmitted.*##"`
|
NB_UE_GOT_SYNC=`egrep -c "got sync" $UE_LOG`
|
||||||
NB_RC_PACKETS=`egrep "packets transmitted" $PING_CASE | sed -e "s#^.*packets transmitted, ##" -e "s# received,.*##"`
|
NB_ENB_SYNCED_WITH_UE=`egrep -c "got UE capabilities for UE" $ENB_LOG`
|
||||||
if [ $NB_TR_PACKETS -eq $NB_RC_PACKETS ]
|
if [ $NB_ENB_GOT_SYNC -eq 1 ] && [ $NB_UE_GOT_SYNC -eq 2 ] && [ $NB_ENB_SYNCED_WITH_UE -eq 1 ]
|
||||||
then
|
then
|
||||||
echo " <td bgcolor = \"green\" >OK</td>" >> ./test_simulator_results.html
|
echo " <td bgcolor = \"green\" >OK</td>" >> ./test_simulator_results.html
|
||||||
else
|
else
|
||||||
|
echo " <td bgcolor = \"red\" >OK</td>" >> ./test_simulator_results.html
|
||||||
|
fi
|
||||||
|
echo " <td><pre>" >> ./test_simulator_results.html
|
||||||
|
if [ $NB_ENB_GOT_SYNC -eq 1 ]
|
||||||
|
then
|
||||||
|
echo "<font color = \"blue\">- eNB --> got sync</font>" >> ./test_simulator_results.html
|
||||||
|
else
|
||||||
|
echo "<font color = \"red\"><b>- eNB NEVER got sync</b></font>" >> ./test_simulator_results.html
|
||||||
|
fi
|
||||||
|
if [ $NB_UE_GOT_SYNC -eq 2 ]
|
||||||
|
then
|
||||||
|
echo "<font color = \"blue\">- UE --> got sync</font>" >> ./test_simulator_results.html
|
||||||
|
else
|
||||||
|
echo "<font color = \"red\"><b>- UE NEVER got sync</b></font>" >> ./test_simulator_results.html
|
||||||
|
fi
|
||||||
|
if [ $NB_ENB_SYNCED_WITH_UE -eq 1 ]
|
||||||
|
then
|
||||||
|
echo "<font color = \"blue\">- UE attached to eNB</font>" >> ./test_simulator_results.html
|
||||||
|
else
|
||||||
|
echo "<font color = \"red\"><b>- UE NEVER attached to eNB</b></font>" >> ./test_simulator_results.html
|
||||||
|
fi
|
||||||
|
NB_SEGFAULT_ENB=`egrep -i -c "Segmentation Fault" $ENB_LOG`
|
||||||
|
if [ $NB_SEGFAULT_ENB -ne 0 ]
|
||||||
|
then
|
||||||
|
echo "<font color = \"red\"><b>- eNB --> Segmentation Fault</b></font>" >> ./test_simulator_results.html
|
||||||
|
fi
|
||||||
|
NB_SEGFAULT_UE=`egrep -i -c "Segmentation Fault" $UE_LOG`
|
||||||
|
if [ $NB_SEGFAULT_UE -ne 0 ]
|
||||||
|
then
|
||||||
|
echo "<font color = \"red\"><b>- UE --> Segmentation Fault</b></font>" >> ./test_simulator_results.html
|
||||||
|
fi
|
||||||
|
NB_ASSERTION_ENB=`egrep -i -c "Assertion" $ENB_LOG`
|
||||||
|
if [ $NB_ASSERTION_ENB -ne 0 ]
|
||||||
|
then
|
||||||
|
echo "<font color = \"red\"><b>- eNB --> Assertion</b></font>" >> ./test_simulator_results.html
|
||||||
|
awk 'BEGIN{assertion=10}{if(assertion < 3){print " " $0; assertion++};if ($0 ~/Assertion/){print " " $0;assertion=1}}END{}' $ENB_LOG >> ./test_simulator_results.html
|
||||||
|
fi
|
||||||
|
NB_ASSERTION_UE=`egrep -i -c "Assertion" $UE_LOG`
|
||||||
|
if [ $NB_ASSERTION_UE -ne 0 ]
|
||||||
|
then
|
||||||
|
echo "<font color = \"red\"><b>- eNB --> Assertion</b></font>" >> ./test_simulator_results.html
|
||||||
|
awk 'BEGIN{assertion=10}{if(assertion < 3){print " " $0; assertion++};if ($0 ~/Assertion/){print " " $0;assertion=1}}END{}' $UE_LOG >> ./test_simulator_results.html
|
||||||
|
fi
|
||||||
|
echo " </pre></td>" >> ./test_simulator_results.html
|
||||||
|
echo " </tr>" >> ./test_simulator_results.html
|
||||||
|
fi
|
||||||
|
PING_CASE=$ARCHIVES_LOC/${TMODE}_${BW}MHz_ping_ue.txt
|
||||||
|
if [ -f $PING_CASE ]
|
||||||
|
then
|
||||||
|
echo " <tr>" >> ./test_simulator_results.html
|
||||||
|
NAME=`echo $PING_CASE | sed -e "s#$ARCHIVES_LOC/##"`
|
||||||
|
echo " <td>$NAME</td>" >> ./test_simulator_results.html
|
||||||
|
CMD=`egrep "COMMAND IS" $PING_CASE | sed -e "s#COMMAND IS: ##"`
|
||||||
|
echo " <td>$CMD</td>" >> ./test_simulator_results.html
|
||||||
|
FILE_COMPLETE=`egrep -c "ping statistics" $PING_CASE`
|
||||||
|
if [ $FILE_COMPLETE -eq 0 ]
|
||||||
|
then
|
||||||
echo " <td bgcolor = \"red\" >KO</td>" >> ./test_simulator_results.html
|
echo " <td bgcolor = \"red\" >KO</td>" >> ./test_simulator_results.html
|
||||||
|
echo " <td>N/A</td>" >> ./test_simulator_results.html
|
||||||
|
else
|
||||||
|
NB_TR_PACKETS=`egrep "packets transmitted" $PING_CASE | sed -e "s# packets transmitted.*##"`
|
||||||
|
NB_RC_PACKETS=`egrep "packets transmitted" $PING_CASE | sed -e "s#^.*packets transmitted, ##" -e "s# received,.*##"`
|
||||||
|
if [ $NB_TR_PACKETS -eq $NB_RC_PACKETS ]
|
||||||
|
then
|
||||||
|
echo " <td bgcolor = \"green\" >OK</td>" >> ./test_simulator_results.html
|
||||||
|
else
|
||||||
|
echo " <td bgcolor = \"red\" >KO</td>" >> ./test_simulator_results.html
|
||||||
|
fi
|
||||||
|
echo " <td>" >> ./test_simulator_results.html
|
||||||
|
echo " <pre>" >> ./test_simulator_results.html
|
||||||
|
STATS=`egrep "packets transmitted" $PING_CASE | sed -e "s#^.*received, ##" -e "s#, time.*##" -e "s# packet loss##"`
|
||||||
|
echo "Packet Loss : $STATS" >> ./test_simulator_results.html
|
||||||
|
RTTMIN=`egrep "rtt min" $PING_CASE | awk '{split($4,a,"/"); print a[1] " " $5}'`
|
||||||
|
echo "RTT Minimal : $RTTMIN" >> ./test_simulator_results.html
|
||||||
|
RTTAVG=`egrep "rtt min" $PING_CASE | awk '{split($4,a,"/"); print a[2] " " $5}'`
|
||||||
|
echo "RTT Average : $RTTAVG" >> ./test_simulator_results.html
|
||||||
|
RTTMAX=`egrep "rtt min" $PING_CASE | awk '{split($4,a,"/"); print a[3] " " $5}'`
|
||||||
|
echo "RTT Maximal : $RTTMAX" >> ./test_simulator_results.html
|
||||||
|
echo " </pre>" >> ./test_simulator_results.html
|
||||||
|
echo " </td>" >> ./test_simulator_results.html
|
||||||
|
fi
|
||||||
|
echo " </tr>" >> ./test_simulator_results.html
|
||||||
|
fi
|
||||||
|
|
||||||
|
if [ -f $ARCHIVES_LOC/${TMODE}_${BW}*iperf*dl*client*txt ]
|
||||||
|
then
|
||||||
|
IPERF_TESTS=`ls $ARCHIVES_LOC/${TMODE}_${BW}*iperf*client*txt`
|
||||||
|
else
|
||||||
|
echo "There are no iperf files"
|
||||||
|
IPERF_TESTS=""
|
||||||
|
fi
|
||||||
|
for IPERF_CASE in $IPERF_TESTS
|
||||||
|
do
|
||||||
|
echo " <tr>" >> ./test_simulator_results.html
|
||||||
|
NAME=`echo $IPERF_CASE | sed -e "s#$ARCHIVES_LOC/##"`
|
||||||
|
echo " <td>$NAME</td>" >> ./test_simulator_results.html
|
||||||
|
CMD=`egrep "COMMAND IS" $IPERF_CASE | sed -e "s#COMMAND IS: ##"`
|
||||||
|
echo " <td>$CMD</td>" >> ./test_simulator_results.html
|
||||||
|
REQ_BITRATE=`echo $CMD | sed -e "s#^.*-b ##" -e "s#-i 1.*##"`
|
||||||
|
if [[ $REQ_BITRATE =~ .*K.* ]]
|
||||||
|
then
|
||||||
|
REQ_BITRATE=`echo $REQ_BITRATE | sed -e "s#K##"`
|
||||||
|
FLOAT_REQ_BITRATE=`echo "$REQ_BITRATE * 1000.0" | bc -l`
|
||||||
|
fi
|
||||||
|
if [[ $REQ_BITRATE =~ .*M.* ]]
|
||||||
|
then
|
||||||
|
REQ_BITRATE=`echo $REQ_BITRATE | sed -e "s#M##"`
|
||||||
|
FLOAT_REQ_BITRATE=`echo "$REQ_BITRATE * 1000000.0" | bc -l`
|
||||||
|
fi
|
||||||
|
if [[ $REQ_BITRATE =~ .*G.* ]]
|
||||||
|
then
|
||||||
|
REQ_BITRATE=`echo $REQ_BITRATE | sed -e "s#G##"`
|
||||||
|
FLOAT_REQ_BITRATE=`echo "$REQ_BITRATE * 1000000000.0" | bc -l`
|
||||||
|
fi
|
||||||
|
FILE_COMPLETE=`egrep -c "Server Report" $IPERF_CASE`
|
||||||
|
if [ $FILE_COMPLETE -eq 0 ]
|
||||||
|
then
|
||||||
|
echo " <td bgcolor = \"red\" >KO</td>" >> ./test_simulator_results.html
|
||||||
|
SERVER_FILE=`echo $IPERF_CASE | sed -e "s#client#server#"`
|
||||||
|
FLOAT_EFF_BITRATE=`grep --color=never sec $SERVER_FILE | sed -e "s#^.*Bytes *##" -e "s#sec *.*#sec#" | awk 'BEGIN{s=0;n=0}{n++;if ($2 ~/Mbits/){a = $1 * 1000000};if ($2 ~/Kbits/){a = $1 * 1000};s=s+a}END{br=s/n; printf "%.0f", br}'`
|
||||||
|
EFFECTIVE_BITRATE=`grep --color=never sec $SERVER_FILE | sed -e "s#^.*Bytes *##" -e "s#sec *.*#sec#" | awk 'BEGIN{s=0;n=0}{n++;if ($2 ~/Mbits/){a = $1 * 1000000};if ($2 ~/Kbits/){a = $1 * 1000};s=s+a}END{br=s/n; if(br>1000000){printf "%.2f MBits/sec", br/1000000}}'`
|
||||||
|
PERF=`echo "100 * $FLOAT_EFF_BITRATE / $FLOAT_REQ_BITRATE" | bc -l | awk '{printf "%.2f", $0}'`
|
||||||
|
JITTER=`grep --color=never sec $SERVER_FILE | sed -e "s#^.*/sec *##" -e "s# *ms.*##" | awk 'BEGIN{s=0;n=0}{n++;s+=$1}END{jitter=s/n; printf "%.3f ms", jitter}'`
|
||||||
|
PACKETLOSS_NOSIGN=`grep --color=never sec $SERVER_FILE | sed -e "s#^.*(##" -e "s#%.*##" | awk 'BEGIN{s=0;n=0}{n++;s+=$1}END{per=s/n; printf "%.1f", per}'`
|
||||||
|
PACKETLOSS=`echo "${PACKETLOSS_NOSIGN}%"`
|
||||||
|
else
|
||||||
|
EFFECTIVE_BITRATE=`tail -n3 $IPERF_CASE | egrep "Mbits/sec" | sed -e "s#^.*MBytes *##" -e "s#sec.*#sec#"`
|
||||||
|
if [[ $EFFECTIVE_BITRATE =~ .*Kbits/sec.* ]]
|
||||||
|
then
|
||||||
|
EFFECTIVE_BITRATE=`echo $EFFECTIVE_BITRATE | sed -e "s# *Kbits/sec.*##"`
|
||||||
|
FLOAT_EFF_BITRATE=`echo "$EFFECTIVE_BITRATE * 1000" | bc -l`
|
||||||
|
fi
|
||||||
|
if [[ $EFFECTIVE_BITRATE =~ .*Mbits/sec.* ]]
|
||||||
|
then
|
||||||
|
EFFECTIVE_BITRATE=`echo $EFFECTIVE_BITRATE | sed -e "s# *Mbits/sec.*##"`
|
||||||
|
FLOAT_EFF_BITRATE=`echo "$EFFECTIVE_BITRATE * 1000000" | bc -l`
|
||||||
|
fi
|
||||||
|
if [[ $EFFECTIVE_BITRATE =~ .*Gbits/sec.* ]]
|
||||||
|
then
|
||||||
|
EFFECTIVE_BITRATE=`echo $EFFECTIVE_BITRATE | sed -e "s# *Gbits/sec.*##"`
|
||||||
|
FLOAT_EFF_BITRATE=`echo "$EFFECTIVE_BITRATE * 1000000000" | bc -l`
|
||||||
|
fi
|
||||||
|
PERF=`echo "100 * $FLOAT_EFF_BITRATE / $FLOAT_REQ_BITRATE" | bc -l | awk '{printf "%.2f", $0}'`
|
||||||
|
PERF_INT=`echo "100 * $FLOAT_EFF_BITRATE / $FLOAT_REQ_BITRATE" | bc -l | awk '{printf "%.0f", $0}'`
|
||||||
|
if [[ $PERF_INT -lt 90 ]]
|
||||||
|
then
|
||||||
|
echo " <td bgcolor = \"red\" >KO</td>" >> ./test_simulator_results.html
|
||||||
|
else
|
||||||
|
echo " <td bgcolor = \"green\" >OK</td>" >> ./test_simulator_results.html
|
||||||
|
fi
|
||||||
|
EFFECTIVE_BITRATE=`tail -n3 $IPERF_CASE | egrep "Mbits/sec" | sed -e "s#^.*MBytes *##" -e "s#sec.*#sec#"`
|
||||||
|
JITTER=`tail -n3 $IPERF_CASE | egrep "Mbits/sec" | sed -e "s#^.*Mbits/sec *##" -e "s#ms.*#ms#"`
|
||||||
|
PACKETLOSS=`tail -n3 $IPERF_CASE | egrep "Mbits/sec" | sed -e "s#^.*(##" -e "s#).*##"`
|
||||||
fi
|
fi
|
||||||
echo " <td>" >> ./test_simulator_results.html
|
echo " <td>" >> ./test_simulator_results.html
|
||||||
echo " <pre>" >> ./test_simulator_results.html
|
echo " <pre>" >> ./test_simulator_results.html
|
||||||
STATS=`egrep "packets transmitted" $PING_CASE | sed -e "s#^.*received, ##" -e "s#, time.*##" -e "s# packet loss##"`
|
echo "Bitrate : $EFFECTIVE_BITRATE" >> ./test_simulator_results.html
|
||||||
echo "Packet Loss : $STATS" >> ./test_simulator_results.html
|
echo "Bitrate Perf : $PERF %" >> ./test_simulator_results.html
|
||||||
RTTMIN=`egrep "rtt min" $PING_CASE | awk '{split($4,a,"/"); print a[1] " " $5}'`
|
echo "Jitter : $JITTER" >> ./test_simulator_results.html
|
||||||
echo "RTT Minimal : $RTTMIN" >> ./test_simulator_results.html
|
echo "Packet Loss : $PACKETLOSS" >> ./test_simulator_results.html
|
||||||
RTTAVG=`egrep "rtt min" $PING_CASE | awk '{split($4,a,"/"); print a[2] " " $5}'`
|
|
||||||
echo "RTT Average : $RTTAVG" >> ./test_simulator_results.html
|
|
||||||
RTTMAX=`egrep "rtt min" $PING_CASE | awk '{split($4,a,"/"); print a[3] " " $5}'`
|
|
||||||
echo "RTT Maximal : $RTTMAX" >> ./test_simulator_results.html
|
|
||||||
echo " </pre>" >> ./test_simulator_results.html
|
echo " </pre>" >> ./test_simulator_results.html
|
||||||
echo " </td>" >> ./test_simulator_results.html
|
echo " </td>" >> ./test_simulator_results.html
|
||||||
fi
|
echo " </tr>" >> ./test_simulator_results.html
|
||||||
echo " </tr>" >> ./test_simulator_results.html
|
done
|
||||||
fi
|
|
||||||
|
|
||||||
if [ -f $ARCHIVES_LOC/${BW}*iperf*dl*client*txt ]
|
|
||||||
then
|
|
||||||
IPERF_TESTS=`ls $ARCHIVES_LOC/${BW}*iperf*client*txt`
|
|
||||||
else
|
|
||||||
echo "There are no iperf files"
|
|
||||||
IPERF_TESTS=""
|
|
||||||
fi
|
|
||||||
for IPERF_CASE in $IPERF_TESTS
|
|
||||||
do
|
|
||||||
echo " <tr>" >> ./test_simulator_results.html
|
|
||||||
NAME=`echo $IPERF_CASE | sed -e "s#$ARCHIVES_LOC/##"`
|
|
||||||
echo " <td>$NAME</td>" >> ./test_simulator_results.html
|
|
||||||
CMD=`egrep "COMMAND IS" $IPERF_CASE | sed -e "s#COMMAND IS: ##"`
|
|
||||||
echo " <td>$CMD</td>" >> ./test_simulator_results.html
|
|
||||||
REQ_BITRATE=`echo $CMD | sed -e "s#^.*-b ##" -e "s#-i 1.*##"`
|
|
||||||
if [[ $REQ_BITRATE =~ .*K.* ]]
|
|
||||||
then
|
|
||||||
REQ_BITRATE=`echo $REQ_BITRATE | sed -e "s#K##"`
|
|
||||||
FLOAT_REQ_BITRATE=`echo "$REQ_BITRATE * 1000.0" | bc -l`
|
|
||||||
fi
|
|
||||||
if [[ $REQ_BITRATE =~ .*M.* ]]
|
|
||||||
then
|
|
||||||
REQ_BITRATE=`echo $REQ_BITRATE | sed -e "s#M##"`
|
|
||||||
FLOAT_REQ_BITRATE=`echo "$REQ_BITRATE * 1000000.0" | bc -l`
|
|
||||||
fi
|
|
||||||
if [[ $REQ_BITRATE =~ .*G.* ]]
|
|
||||||
then
|
|
||||||
REQ_BITRATE=`echo $REQ_BITRATE | sed -e "s#G##"`
|
|
||||||
FLOAT_REQ_BITRATE=`echo "$REQ_BITRATE * 1000000000.0" | bc -l`
|
|
||||||
fi
|
|
||||||
FILE_COMPLETE=`egrep -c "Server Report" $IPERF_CASE`
|
|
||||||
if [ $FILE_COMPLETE -eq 0 ]
|
|
||||||
then
|
|
||||||
echo " <td bgcolor = \"red\" >KO</td>" >> ./test_simulator_results.html
|
|
||||||
SERVER_FILE=`echo $IPERF_CASE | sed -e "s#client#server#"`
|
|
||||||
FLOAT_EFF_BITRATE=`grep --color=never sec $SERVER_FILE | sed -e "s#^.*Bytes *##" -e "s#sec *.*#sec#" | awk 'BEGIN{s=0;n=0}{n++;if ($2 ~/Mbits/){a = $1 * 1000000};if ($2 ~/Kbits/){a = $1 * 1000};s=s+a}END{br=s/n; printf "%.0f", br}'`
|
|
||||||
EFFECTIVE_BITRATE=`grep --color=never sec $SERVER_FILE | sed -e "s#^.*Bytes *##" -e "s#sec *.*#sec#" | awk 'BEGIN{s=0;n=0}{n++;if ($2 ~/Mbits/){a = $1 * 1000000};if ($2 ~/Kbits/){a = $1 * 1000};s=s+a}END{br=s/n; if(br>1000000){printf "%.2f MBits/sec", br/1000000}}'`
|
|
||||||
PERF=`echo "100 * $FLOAT_EFF_BITRATE / $FLOAT_REQ_BITRATE" | bc -l | awk '{printf "%.2f", $0}'`
|
|
||||||
JITTER=`grep --color=never sec $SERVER_FILE | sed -e "s#^.*/sec *##" -e "s# *ms.*##" | awk 'BEGIN{s=0;n=0}{n++;s+=$1}END{jitter=s/n; printf "%.3f ms", jitter}'`
|
|
||||||
PACKETLOSS_NOSIGN=`grep --color=never sec $SERVER_FILE | sed -e "s#^.*(##" -e "s#%.*##" | awk 'BEGIN{s=0;n=0}{n++;s+=$1}END{per=s/n; printf "%.1f", per}'`
|
|
||||||
PACKETLOSS=`echo "${PACKETLOSS_NOSIGN}%"`
|
|
||||||
else
|
|
||||||
EFFECTIVE_BITRATE=`tail -n3 $IPERF_CASE | egrep "Mbits/sec" | sed -e "s#^.*MBytes *##" -e "s#sec.*#sec#"`
|
|
||||||
if [[ $EFFECTIVE_BITRATE =~ .*Kbits/sec.* ]]
|
|
||||||
then
|
|
||||||
EFFECTIVE_BITRATE=`echo $EFFECTIVE_BITRATE | sed -e "s# *Kbits/sec.*##"`
|
|
||||||
FLOAT_EFF_BITRATE=`echo "$EFFECTIVE_BITRATE * 1000" | bc -l`
|
|
||||||
fi
|
|
||||||
if [[ $EFFECTIVE_BITRATE =~ .*Mbits/sec.* ]]
|
|
||||||
then
|
|
||||||
EFFECTIVE_BITRATE=`echo $EFFECTIVE_BITRATE | sed -e "s# *Mbits/sec.*##"`
|
|
||||||
FLOAT_EFF_BITRATE=`echo "$EFFECTIVE_BITRATE * 1000000" | bc -l`
|
|
||||||
fi
|
|
||||||
if [[ $EFFECTIVE_BITRATE =~ .*Gbits/sec.* ]]
|
|
||||||
then
|
|
||||||
EFFECTIVE_BITRATE=`echo $EFFECTIVE_BITRATE | sed -e "s# *Gbits/sec.*##"`
|
|
||||||
FLOAT_EFF_BITRATE=`echo "$EFFECTIVE_BITRATE * 1000000000" | bc -l`
|
|
||||||
fi
|
|
||||||
PERF=`echo "100 * $FLOAT_EFF_BITRATE / $FLOAT_REQ_BITRATE" | bc -l | awk '{printf "%.2f", $0}'`
|
|
||||||
PERF_INT=`echo "100 * $FLOAT_EFF_BITRATE / $FLOAT_REQ_BITRATE" | bc -l | awk '{printf "%.0f", $0}'`
|
|
||||||
if [[ $PERF_INT -lt 90 ]]
|
|
||||||
then
|
|
||||||
echo " <td bgcolor = \"red\" >KO</td>" >> ./test_simulator_results.html
|
|
||||||
else
|
|
||||||
echo " <td bgcolor = \"green\" >OK</td>" >> ./test_simulator_results.html
|
|
||||||
fi
|
|
||||||
EFFECTIVE_BITRATE=`tail -n3 $IPERF_CASE | egrep "Mbits/sec" | sed -e "s#^.*MBytes *##" -e "s#sec.*#sec#"`
|
|
||||||
JITTER=`tail -n3 $IPERF_CASE | egrep "Mbits/sec" | sed -e "s#^.*Mbits/sec *##" -e "s#ms.*#ms#"`
|
|
||||||
PACKETLOSS=`tail -n3 $IPERF_CASE | egrep "Mbits/sec" | sed -e "s#^.*(##" -e "s#).*##"`
|
|
||||||
fi
|
|
||||||
echo " <td>" >> ./test_simulator_results.html
|
|
||||||
echo " <pre>" >> ./test_simulator_results.html
|
|
||||||
echo "Bitrate : $EFFECTIVE_BITRATE" >> ./test_simulator_results.html
|
|
||||||
echo "Bitrate Perf : $PERF %" >> ./test_simulator_results.html
|
|
||||||
echo "Jitter : $JITTER" >> ./test_simulator_results.html
|
|
||||||
echo "Packet Loss : $PACKETLOSS" >> ./test_simulator_results.html
|
|
||||||
echo " </pre>" >> ./test_simulator_results.html
|
|
||||||
echo " </td>" >> ./test_simulator_results.html
|
|
||||||
echo " </tr>" >> ./test_simulator_results.html
|
|
||||||
done
|
done
|
||||||
done
|
done
|
||||||
|
|
||||||
|
|||||||
+175
-45
@@ -75,6 +75,7 @@ function start_basic_sim_enb {
|
|||||||
local LOC_EPC_IP_ADDR=$3
|
local LOC_EPC_IP_ADDR=$3
|
||||||
local LOC_LOG_FILE=$4
|
local LOC_LOG_FILE=$4
|
||||||
local LOC_NB_RBS=$5
|
local LOC_NB_RBS=$5
|
||||||
|
local LOC_CONF_FILE=$6
|
||||||
echo "cd /home/ubuntu/tmp" > $1
|
echo "cd /home/ubuntu/tmp" > $1
|
||||||
echo "echo \"sudo apt-get --yes --quiet install daemon \"" >> $1
|
echo "echo \"sudo apt-get --yes --quiet install daemon \"" >> $1
|
||||||
echo "sudo apt-get --yes install daemon >> /home/ubuntu/tmp/cmake_targets/log/daemon-install.txt 2>&1" >> $1
|
echo "sudo apt-get --yes install daemon >> /home/ubuntu/tmp/cmake_targets/log/daemon-install.txt 2>&1" >> $1
|
||||||
@@ -83,13 +84,13 @@ function start_basic_sim_enb {
|
|||||||
echo "echo \"source oaienv\"" >> $1
|
echo "echo \"source oaienv\"" >> $1
|
||||||
echo "source oaienv" >> $1
|
echo "source oaienv" >> $1
|
||||||
echo "cd ci-scripts/conf_files/" >> $1
|
echo "cd ci-scripts/conf_files/" >> $1
|
||||||
echo "cp lte-basic-sim.conf ci-lte-basic-sim.conf" >> $1
|
echo "cp $LOC_CONF_FILE ci-$LOC_CONF_FILE" >> $1
|
||||||
echo "sed -i -e 's#N_RB_DL.*=.*;#N_RB_DL = $LOC_NB_RBS;#' -e 's#CI_MME_IP_ADDR#$LOC_EPC_IP_ADDR#' -e 's#CI_ENB_IP_ADDR#$LOC_VM_IP_ADDR#' ci-lte-basic-sim.conf" >> $1
|
echo "sed -i -e 's#N_RB_DL.*=.*;#N_RB_DL = $LOC_NB_RBS;#' -e 's#CI_MME_IP_ADDR#$LOC_EPC_IP_ADDR#' -e 's#CI_ENB_IP_ADDR#$LOC_VM_IP_ADDR#' ci-$LOC_CONF_FILE" >> $1
|
||||||
echo "echo \"grep N_RB_DL ci-lte-basic-sim.conf\"" >> $1
|
echo "echo \"grep N_RB_DL ci-$LOC_CONF_FILE\"" >> $1
|
||||||
echo "grep N_RB_DL ci-lte-basic-sim.conf | sed -e 's#N_RB_DL.*=#N_RB_DL =#'" >> $1
|
echo "grep N_RB_DL ci-$LOC_CONF_FILE | sed -e 's#N_RB_DL.*=#N_RB_DL =#'" >> $1
|
||||||
echo "echo \"cd /home/ubuntu/tmp/cmake_targets/basic_simulator/enb/\"" >> $1
|
echo "echo \"cd /home/ubuntu/tmp/cmake_targets/basic_simulator/enb/\"" >> $1
|
||||||
echo "cd /home/ubuntu/tmp/cmake_targets/basic_simulator/enb/" >> $1
|
echo "cd /home/ubuntu/tmp/cmake_targets/basic_simulator/enb/" >> $1
|
||||||
echo "echo \"ulimit -c unlimited && ./lte-softmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-lte-basic-sim.conf\" > ./my-lte-softmodem-run.sh " >> $1
|
echo "echo \"ulimit -c unlimited && ./lte-softmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE\" > ./my-lte-softmodem-run.sh " >> $1
|
||||||
echo "chmod 775 ./my-lte-softmodem-run.sh" >> $1
|
echo "chmod 775 ./my-lte-softmodem-run.sh" >> $1
|
||||||
echo "cat ./my-lte-softmodem-run.sh" >> $1
|
echo "cat ./my-lte-softmodem-run.sh" >> $1
|
||||||
echo "sudo -E daemon --inherit --unsafe --name=enb_daemon --chdir=/home/ubuntu/tmp/cmake_targets/basic_simulator/enb -o /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE ./my-lte-softmodem-run.sh" >> $1
|
echo "sudo -E daemon --inherit --unsafe --name=enb_daemon --chdir=/home/ubuntu/tmp/cmake_targets/basic_simulator/enb -o /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE ./my-lte-softmodem-run.sh" >> $1
|
||||||
@@ -102,9 +103,10 @@ function start_basic_sim_enb {
|
|||||||
function start_basic_sim_ue {
|
function start_basic_sim_ue {
|
||||||
local LOC_UE_LOG_FILE=$3
|
local LOC_UE_LOG_FILE=$3
|
||||||
local LOC_NB_RBS=$4
|
local LOC_NB_RBS=$4
|
||||||
|
local LOC_FREQUENCY=$5
|
||||||
echo "echo \"cd /home/ubuntu/tmp/cmake_targets/basic_simulator/ue\"" > $1
|
echo "echo \"cd /home/ubuntu/tmp/cmake_targets/basic_simulator/ue\"" > $1
|
||||||
echo "cd /home/ubuntu/tmp/cmake_targets/basic_simulator/ue" > $1
|
echo "cd /home/ubuntu/tmp/cmake_targets/basic_simulator/ue" > $1
|
||||||
echo "echo \"./lte-uesoftmodem -C 2680000000 -r $LOC_NB_RBS --ue-rxgain 140\" > ./my-lte-uesoftmodem-run.sh" >> $1
|
echo "echo \"./lte-uesoftmodem -C ${LOC_FREQUENCY}000000 -r $LOC_NB_RBS --ue-rxgain 140\" > ./my-lte-uesoftmodem-run.sh" >> $1
|
||||||
echo "chmod 775 ./my-lte-uesoftmodem-run.sh" >> $1
|
echo "chmod 775 ./my-lte-uesoftmodem-run.sh" >> $1
|
||||||
echo "cat ./my-lte-uesoftmodem-run.sh" >> $1
|
echo "cat ./my-lte-uesoftmodem-run.sh" >> $1
|
||||||
echo "sudo -E daemon --inherit --unsafe --name=ue_daemon --chdir=/home/ubuntu/tmp/cmake_targets/basic_simulator/ue -o /home/ubuntu/tmp/cmake_targets/log/$LOC_UE_LOG_FILE ./my-lte-uesoftmodem-run.sh" >> $1
|
echo "sudo -E daemon --inherit --unsafe --name=ue_daemon --chdir=/home/ubuntu/tmp/cmake_targets/basic_simulator/ue -o /home/ubuntu/tmp/cmake_targets/log/$LOC_UE_LOG_FILE ./my-lte-uesoftmodem-run.sh" >> $1
|
||||||
@@ -270,7 +272,6 @@ function recover_core_dump {
|
|||||||
local TC=`echo $3 | sed -e "s#^.*enb_##" -e "s#Hz.*#Hz#"`
|
local TC=`echo $3 | sed -e "s#^.*enb_##" -e "s#Hz.*#Hz#"`
|
||||||
echo "Segmentation fault detected on enb -> recovering core dump"
|
echo "Segmentation fault detected on enb -> recovering core dump"
|
||||||
echo "cd /home/ubuntu/tmp/cmake_targets/basic_simulator/enb" > $1
|
echo "cd /home/ubuntu/tmp/cmake_targets/basic_simulator/enb" > $1
|
||||||
echo "cp /home/ubuntu/tmp/ci-scripts/conf_files/ci-lte-basic-sim.conf ." >> $1
|
|
||||||
echo "sync" >> $1
|
echo "sync" >> $1
|
||||||
echo "sudo tar -cjhf basic-simulator-enb-core-${TC}.bz2 core lte-softmodem *.so ci-lte-basic-sim.conf my-lte-softmodem-run.sh" >> $1
|
echo "sudo tar -cjhf basic-simulator-enb-core-${TC}.bz2 core lte-softmodem *.so ci-lte-basic-sim.conf my-lte-softmodem-run.sh" >> $1
|
||||||
echo "sudo rm core" >> $1
|
echo "sudo rm core" >> $1
|
||||||
@@ -694,16 +695,16 @@ then
|
|||||||
fi
|
fi
|
||||||
|
|
||||||
echo "############################################################"
|
echo "############################################################"
|
||||||
echo "Starting the eNB at 5MHz"
|
echo "Starting the eNB in FDD-5MHz mode"
|
||||||
echo "############################################################"
|
echo "############################################################"
|
||||||
CURRENT_ENB_LOG_FILE=enb_05MHz.log
|
CURRENT_ENB_LOG_FILE=fdd_05MHz_enb.log
|
||||||
start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 25
|
start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 25 lte-fdd-basic-sim.conf
|
||||||
|
|
||||||
echo "############################################################"
|
echo "############################################################"
|
||||||
echo "Starting the UE at 5MHz"
|
echo "Starting the UE in FDD-5MHz mode"
|
||||||
echo "############################################################"
|
echo "############################################################"
|
||||||
CURRENT_UE_LOG_FILE=ue_05MHz.log
|
CURRENT_UE_LOG_FILE=fdd_05MHz_ue.log
|
||||||
start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 25
|
start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 25 2680
|
||||||
if [ $UE_SYNC -eq 0 ]
|
if [ $UE_SYNC -eq 0 ]
|
||||||
then
|
then
|
||||||
echo "Problem w/ eNB and UE not syncing"
|
echo "Problem w/ eNB and UE not syncing"
|
||||||
@@ -719,14 +720,15 @@ then
|
|||||||
echo "############################################################"
|
echo "############################################################"
|
||||||
echo "Pinging the UE"
|
echo "Pinging the UE"
|
||||||
echo "############################################################"
|
echo "############################################################"
|
||||||
ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR 05MHz_ping_ue.txt
|
PING_LOG_FILE=fdd_05MHz_ping_ue.txt
|
||||||
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/05MHz_ping_ue.txt $ARCHIVES_LOC
|
ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE
|
||||||
check_ping_result $ARCHIVES_LOC/05MHz_ping_ue.txt 20
|
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
|
||||||
|
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
|
||||||
|
|
||||||
echo "############################################################"
|
echo "############################################################"
|
||||||
echo "Iperf DL"
|
echo "Iperf DL"
|
||||||
echo "############################################################"
|
echo "############################################################"
|
||||||
CURR_IPERF_LOG_BASE=05MHz_iperf_dl
|
CURR_IPERF_LOG_BASE=fdd_05MHz_iperf_dl
|
||||||
iperf_dl $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 15 $CURR_IPERF_LOG_BASE
|
iperf_dl $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 15 $CURR_IPERF_LOG_BASE
|
||||||
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
|
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
|
||||||
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
|
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
|
||||||
@@ -735,7 +737,7 @@ then
|
|||||||
echo "############################################################"
|
echo "############################################################"
|
||||||
echo "Iperf UL"
|
echo "Iperf UL"
|
||||||
echo "############################################################"
|
echo "############################################################"
|
||||||
CURR_IPERF_LOG_BASE=05MHz_iperf_ul
|
CURR_IPERF_LOG_BASE=fdd_05MHz_iperf_ul
|
||||||
iperf_ul $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 2 $CURR_IPERF_LOG_BASE
|
iperf_ul $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 2 $CURR_IPERF_LOG_BASE
|
||||||
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
|
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
|
||||||
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
|
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
|
||||||
@@ -750,16 +752,16 @@ then
|
|||||||
recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
|
recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
|
||||||
|
|
||||||
echo "############################################################"
|
echo "############################################################"
|
||||||
echo "Starting the eNB at 10MHz"
|
echo "Starting the eNB in FDD-10MHz mode"
|
||||||
echo "############################################################"
|
echo "############################################################"
|
||||||
CURRENT_ENB_LOG_FILE=enb_10MHz.log
|
CURRENT_ENB_LOG_FILE=fdd_10MHz_enb.log
|
||||||
start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 50
|
start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 50 lte-fdd-basic-sim.conf
|
||||||
|
|
||||||
echo "############################################################"
|
echo "############################################################"
|
||||||
echo "Starting the UE at 10MHz"
|
echo "Starting the UE in FDD-10MHz mode"
|
||||||
echo "############################################################"
|
echo "############################################################"
|
||||||
CURRENT_UE_LOG_FILE=ue_10MHz.log
|
CURRENT_UE_LOG_FILE=fdd_10MHz_ue.log
|
||||||
start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 50
|
start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 50 2680
|
||||||
if [ $UE_SYNC -eq 0 ]
|
if [ $UE_SYNC -eq 0 ]
|
||||||
then
|
then
|
||||||
echo "Problem w/ eNB and UE not syncing"
|
echo "Problem w/ eNB and UE not syncing"
|
||||||
@@ -775,14 +777,15 @@ then
|
|||||||
echo "############################################################"
|
echo "############################################################"
|
||||||
echo "Pinging the UE"
|
echo "Pinging the UE"
|
||||||
echo "############################################################"
|
echo "############################################################"
|
||||||
ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR 10MHz_ping_ue.txt
|
PING_LOG_FILE=fdd_10MHz_ping_ue.txt
|
||||||
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/10MHz_ping_ue.txt $ARCHIVES_LOC
|
ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE
|
||||||
check_ping_result $ARCHIVES_LOC/10MHz_ping_ue.txt 20
|
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
|
||||||
|
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
|
||||||
|
|
||||||
echo "############################################################"
|
echo "############################################################"
|
||||||
echo "Iperf DL"
|
echo "Iperf DL"
|
||||||
echo "############################################################"
|
echo "############################################################"
|
||||||
CURR_IPERF_LOG_BASE=10MHz_iperf_dl
|
CURR_IPERF_LOG_BASE=fdd_10MHz_iperf_dl
|
||||||
iperf_dl $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 15 $CURR_IPERF_LOG_BASE
|
iperf_dl $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 15 $CURR_IPERF_LOG_BASE
|
||||||
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
|
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
|
||||||
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
|
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
|
||||||
@@ -791,7 +794,7 @@ then
|
|||||||
echo "############################################################"
|
echo "############################################################"
|
||||||
echo "Iperf UL"
|
echo "Iperf UL"
|
||||||
echo "############################################################"
|
echo "############################################################"
|
||||||
CURR_IPERF_LOG_BASE=10MHz_iperf_ul
|
CURR_IPERF_LOG_BASE=fdd_10MHz_iperf_ul
|
||||||
iperf_ul $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 2 $CURR_IPERF_LOG_BASE
|
iperf_ul $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 2 $CURR_IPERF_LOG_BASE
|
||||||
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
|
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
|
||||||
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
|
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
|
||||||
@@ -806,16 +809,16 @@ then
|
|||||||
recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
|
recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
|
||||||
|
|
||||||
echo "############################################################"
|
echo "############################################################"
|
||||||
echo "Starting the eNB at 20MHz"
|
echo "Starting the eNB in FDD-20MHz mode"
|
||||||
echo "############################################################"
|
echo "############################################################"
|
||||||
CURRENT_ENB_LOG_FILE=enb_20MHz.log
|
CURRENT_ENB_LOG_FILE=fdd_20MHz_enb.log
|
||||||
start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 100
|
start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 100 lte-fdd-basic-sim.conf
|
||||||
|
|
||||||
echo "############################################################"
|
echo "############################################################"
|
||||||
echo "Starting the UE at 20MHz"
|
echo "Starting the UE in FDD-20MHz mode"
|
||||||
echo "############################################################"
|
echo "############################################################"
|
||||||
CURRENT_UE_LOG_FILE=ue_20MHz.log
|
CURRENT_UE_LOG_FILE=fdd_20MHz_ue.log
|
||||||
start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 100
|
start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 100 2680
|
||||||
if [ $UE_SYNC -eq 0 ]
|
if [ $UE_SYNC -eq 0 ]
|
||||||
then
|
then
|
||||||
echo "Problem w/ eNB and UE not syncing"
|
echo "Problem w/ eNB and UE not syncing"
|
||||||
@@ -831,27 +834,154 @@ then
|
|||||||
echo "############################################################"
|
echo "############################################################"
|
||||||
echo "Pinging the UE"
|
echo "Pinging the UE"
|
||||||
echo "############################################################"
|
echo "############################################################"
|
||||||
ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR 20MHz_ping_ue.txt
|
PING_LOG_FILE=fdd_20MHz_ping_ue.txt
|
||||||
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/20MHz_ping_ue.txt $ARCHIVES_LOC
|
ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE
|
||||||
check_ping_result $ARCHIVES_LOC/20MHz_ping_ue.txt 20
|
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
|
||||||
|
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
|
||||||
|
|
||||||
echo "############################################################"
|
echo "############################################################"
|
||||||
echo "Iperf DL"
|
echo "Iperf DL"
|
||||||
echo "############################################################"
|
echo "############################################################"
|
||||||
CURR_IPERF_LOG_BASE=20MHz_iperf_dl
|
CURR_IPERF_LOG_BASE=fdd_20MHz_iperf_dl
|
||||||
iperf_dl $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 15 $CURR_IPERF_LOG_BASE
|
iperf_dl $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 15 $CURR_IPERF_LOG_BASE
|
||||||
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
|
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
|
||||||
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
|
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
|
||||||
check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE 15
|
check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE 15
|
||||||
|
|
||||||
echo "############################################################"
|
echo "############################################################"
|
||||||
echo "Iperf UL"
|
echo "Terminate enb/ue simulators"
|
||||||
echo "############################################################"
|
echo "############################################################"
|
||||||
# CURR_IPERF_LOG_BASE=20MHz_iperf_ul
|
terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
|
||||||
# iperf_ul $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 1 $CURR_IPERF_LOG_BASE
|
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
|
||||||
# scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
|
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
|
||||||
# scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
|
recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
|
||||||
# check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE 1
|
|
||||||
|
echo "############################################################"
|
||||||
|
echo "Starting the eNB in TDD-5MHz mode"
|
||||||
|
echo "############################################################"
|
||||||
|
CURRENT_ENB_LOG_FILE=tdd_05MHz_enb.log
|
||||||
|
start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 25 lte-tdd-basic-sim.conf
|
||||||
|
|
||||||
|
echo "############################################################"
|
||||||
|
echo "Starting the UE in TDD-5MHz mode"
|
||||||
|
echo "############################################################"
|
||||||
|
CURRENT_UE_LOG_FILE=tdd_05MHz_ue.log
|
||||||
|
start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 25 2350
|
||||||
|
if [ $UE_SYNC -eq 0 ]
|
||||||
|
then
|
||||||
|
echo "Problem w/ eNB and UE not syncing"
|
||||||
|
terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
|
||||||
|
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
|
||||||
|
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
|
||||||
|
recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
|
||||||
|
terminate_ltebox_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
|
||||||
|
exit -1
|
||||||
|
fi
|
||||||
|
get_ue_ip_addr $VM_CMDS $VM_IP_ADDR
|
||||||
|
|
||||||
|
echo "############################################################"
|
||||||
|
echo "Pinging the UE"
|
||||||
|
echo "############################################################"
|
||||||
|
PING_LOG_FILE=tdd_05MHz_ping_ue.txt
|
||||||
|
ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE
|
||||||
|
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
|
||||||
|
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
|
||||||
|
|
||||||
|
echo "############################################################"
|
||||||
|
echo "Terminate enb/ue simulators"
|
||||||
|
echo "############################################################"
|
||||||
|
terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
|
||||||
|
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
|
||||||
|
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
|
||||||
|
recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
|
||||||
|
|
||||||
|
echo "############################################################"
|
||||||
|
echo "Starting the eNB in TDD-10MHz mode"
|
||||||
|
echo "############################################################"
|
||||||
|
CURRENT_ENB_LOG_FILE=tdd_10MHz_enb.log
|
||||||
|
start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 50 lte-tdd-basic-sim.conf
|
||||||
|
|
||||||
|
echo "############################################################"
|
||||||
|
echo "Starting the UE in TDD-10MHz mode"
|
||||||
|
echo "############################################################"
|
||||||
|
CURRENT_UE_LOG_FILE=tdd_10MHz_ue.log
|
||||||
|
start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 50 2350
|
||||||
|
if [ $UE_SYNC -eq 0 ]
|
||||||
|
then
|
||||||
|
echo "Problem w/ eNB and UE not syncing"
|
||||||
|
terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
|
||||||
|
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
|
||||||
|
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
|
||||||
|
recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
|
||||||
|
terminate_ltebox_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
|
||||||
|
exit -1
|
||||||
|
fi
|
||||||
|
get_ue_ip_addr $VM_CMDS $VM_IP_ADDR
|
||||||
|
|
||||||
|
echo "############################################################"
|
||||||
|
echo "Pinging the UE"
|
||||||
|
echo "############################################################"
|
||||||
|
PING_LOG_FILE=tdd_10MHz_ping_ue.txt
|
||||||
|
ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE
|
||||||
|
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
|
||||||
|
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
|
||||||
|
|
||||||
|
echo "############################################################"
|
||||||
|
echo "Iperf DL"
|
||||||
|
echo "############################################################"
|
||||||
|
CURR_IPERF_LOG_BASE=tdd_10MHz_iperf_dl
|
||||||
|
iperf_dl $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 6 $CURR_IPERF_LOG_BASE
|
||||||
|
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
|
||||||
|
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
|
||||||
|
check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE 6
|
||||||
|
|
||||||
|
echo "############################################################"
|
||||||
|
echo "Terminate enb/ue simulators"
|
||||||
|
echo "############################################################"
|
||||||
|
terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
|
||||||
|
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
|
||||||
|
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
|
||||||
|
recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
|
||||||
|
|
||||||
|
echo "############################################################"
|
||||||
|
echo "Starting the eNB in TDD-20MHz mode"
|
||||||
|
echo "############################################################"
|
||||||
|
CURRENT_ENB_LOG_FILE=tdd_20MHz_enb.log
|
||||||
|
start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 100 lte-tdd-basic-sim.conf
|
||||||
|
|
||||||
|
echo "############################################################"
|
||||||
|
echo "Starting the UE in TDD-20MHz mode"
|
||||||
|
echo "############################################################"
|
||||||
|
CURRENT_UE_LOG_FILE=tdd_20MHz_ue.log
|
||||||
|
start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 100 2350
|
||||||
|
if [ $UE_SYNC -eq 0 ]
|
||||||
|
then
|
||||||
|
echo "Problem w/ eNB and UE not syncing"
|
||||||
|
terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
|
||||||
|
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
|
||||||
|
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
|
||||||
|
recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
|
||||||
|
terminate_ltebox_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
|
||||||
|
exit -1
|
||||||
|
fi
|
||||||
|
get_ue_ip_addr $VM_CMDS $VM_IP_ADDR
|
||||||
|
|
||||||
|
echo "############################################################"
|
||||||
|
echo "Pinging the UE"
|
||||||
|
echo "############################################################"
|
||||||
|
PING_LOG_FILE=tdd_20MHz_ping_ue.txt
|
||||||
|
ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE
|
||||||
|
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
|
||||||
|
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
|
||||||
|
|
||||||
|
echo "############################################################"
|
||||||
|
echo "Iperf DL"
|
||||||
|
echo "############################################################"
|
||||||
|
CURR_IPERF_LOG_BASE=tdd_20MHz_iperf_dl
|
||||||
|
iperf_dl $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 6 $CURR_IPERF_LOG_BASE
|
||||||
|
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
|
||||||
|
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
|
||||||
|
check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE 6
|
||||||
|
|
||||||
echo "############################################################"
|
echo "############################################################"
|
||||||
echo "Terminate enb/ue simulators"
|
echo "Terminate enb/ue simulators"
|
||||||
|
|||||||
Reference in New Issue
Block a user