- Fix: avoid infinite loop on mulitcast read thread if no data to read
Pre-ci test passed git-svn-id: http://svn.eurecom.fr/openair4G/trunk@4000 818b1a75-f10b-46b9-bf7c-635c3b92a50f
This commit is contained in:
Cedric Roux
@@ -0,0 +1,14 @@
|
||||
all: oaisim nasmesh
|
||||
|
||||
oaisim:
|
||||
(cd $(OPENAIR_TARGETS)/SIMU/USER && make oaisim NAS=1)
|
||||
nasmesh:
|
||||
(cd $(OPENAIR2_DIR) && make nasmesh_netlink.ko)
|
||||
(cd $(OPENAIR2_DIR)/NAS/DRIVER/MESH/RB_TOOL/ && make)
|
||||
|
||||
one_eNB_one_UE: oaisim nasmesh
|
||||
|
||||
userclean: clean oaisim nasmesh
|
||||
|
||||
clean:
|
||||
(cd $(OPENAIR_TARGETS)/SIMU/USER && make clean)
|
||||
+27
@@ -0,0 +1,27 @@
|
||||
#!/bin/sh
|
||||
echo "Bringup eNB interface"
|
||||
sudo rmmod nasmesh
|
||||
make all
|
||||
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko
|
||||
|
||||
#avoid conflict with reserved multicast addresses (224.0.0.11,224.0.0.13, 224.0.0.16)
|
||||
#sudo route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0
|
||||
sudo ip route add 239.0.0.160/28 dev eth0
|
||||
|
||||
sudo ifconfig oai0 10.0.1.1 netmask 255.255.255.0 broadcast 10.0.1.255
|
||||
|
||||
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -s 10.0.1.1 -t 10.0.1.2 -r 3
|
||||
echo "to see eNB stats, pleasae run : watch_enb script"
|
||||
if [ -z $1 ]; then
|
||||
echo "nice -10 $OPENAIR_TARGETS/SIMU/USER/oaisim -u0 -M0 -p2 -g3 -l3 > /dev/null"
|
||||
nice -10 $OPENAIR_TARGETS/SIMU/USER/oaisim -u0 -M0 -p2 -g3 -l3 > /dev/null
|
||||
else
|
||||
if [ $1 = "all" ]; then
|
||||
echo "nice -10 $OPENAIR_TARGETS/SIMU/USER/oaisim -u0 -M0 -p2 -g3 -l7"
|
||||
nice -10 $OPENAIR_TARGETS/SIMU/USER/oaisim -u0 -M0 -p2 -g3 -l7
|
||||
else
|
||||
echo "nice -10 $OPENAIR_TARGETS/SIMU/USER/oaisim -u0 -M0 -p2 -g3 -l7 | grep -i $1"
|
||||
nice -10 $OPENAIR_TARGETS/SIMU/USER/oaisim -u0 -M0 -p2 -g3 -l7 | grep -i $1
|
||||
fi
|
||||
fi
|
||||
echo "End"
|
||||
+28
@@ -0,0 +1,28 @@
|
||||
#!/bin/sh
|
||||
echo "Bringup UE interface"
|
||||
sudo rmmod nasmesh
|
||||
make nasmesh all
|
||||
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko
|
||||
|
||||
#avoid conflict with reserved multicast addresses (224.0.0.11,224.0.0.13, 224.0.0.16)
|
||||
#sudo route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0
|
||||
sudo ip route add 239.0.0.160/28 dev eth0
|
||||
|
||||
sudo ifconfig oai0 10.0.1.2 netmask 255.255.255.0 broadcast 10.0.1.255
|
||||
|
||||
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -s 10.0.1.2 -t 10.0.1.1 -r 3
|
||||
|
||||
echo "to see UE stats, pleasae run : watch_ue script"
|
||||
if [ -z $1 ]; then
|
||||
echo "nice -10 $OPENAIR_TARGETS/SIMU/USER/oaisim -b0 -M1 -p2 -g3 -l3 > /dev/null"
|
||||
nice -10 $OPENAIR_TARGETS/SIMU/USER/oaisim -b0 -M1 -p2 -g3 -l3 > /dev/null
|
||||
else
|
||||
if [ $1 = "all" ]; then
|
||||
echo "nice -10 $OPENAIR_TARGETS/SIMU/USER/oaisim -b0 -M1 -p2 -g3 -l7"
|
||||
nice -10 $OPENAIR_TARGETS/SIMU/USER/oaisim -b0 -M1 -p2 -g3 -l7
|
||||
else
|
||||
echo "nice -10 $OPENAIR_TARGETS/SIMU/USER/oaisim -b0 -M1 -p2 -g3 -l7 | grep -i $1"
|
||||
nice -10 $OPENAIR_TARGETS/SIMU/USER/oaisim -b0 -M1 -p2 -g3 -l7 | grep -i $1
|
||||
fi
|
||||
fi
|
||||
echo "End"
|
||||
+209
@@ -0,0 +1,209 @@
|
||||
#!/usr/bin/python
|
||||
|
||||
import os, sys, warnings
|
||||
import serial
|
||||
|
||||
def sendToTTY(lineP):
|
||||
sys.stdout.write("\nSend:\n" + lineP+"\n")
|
||||
g_ser.write(lineP)
|
||||
g_ser.flush()
|
||||
|
||||
|
||||
|
||||
g_ser = serial.Serial('/dev/ttyUSB0', 9600, timeout=1)
|
||||
|
||||
buffer = ''
|
||||
while True:
|
||||
buffer += g_ser.read(1)
|
||||
#sys.stdout.write("buffer is now:\n" + buffer+"\n")
|
||||
buffer = buffer.lstrip('\r')
|
||||
if '\r' in buffer:
|
||||
at_received, buffer = buffer.split('\r')[-2:]
|
||||
|
||||
at_received = at_received.strip('\n')
|
||||
at_received = at_received.strip('\r')
|
||||
|
||||
if at_received == '\n' or at_received == '' or at_received == '\r':
|
||||
break
|
||||
else:
|
||||
sys.stdout.write("Receive stripped:\n" + at_received+"\n")
|
||||
# Q0 = enable codes
|
||||
# Q1 = disable codes
|
||||
if at_received == 'ATE0Q0V1':
|
||||
sendToTTY('\rOK\r')
|
||||
|
||||
# ATS0, Automatic Answer
|
||||
# This S-parameter controls the automatic answering feature of the modem
|
||||
# 0 automatic answering is disabled
|
||||
# 1 - 255 enable automatic answering on the ring number specified
|
||||
# here value received is 0
|
||||
elif at_received.startswith('ATS0='):
|
||||
sendToTTY('\rOK\r')
|
||||
|
||||
# AT+CMEEReport mobile equipment error
|
||||
#0 Disable +CME ERROR result code. Use ERROR instead.
|
||||
#1 Enable +CME ERROR result code and use numeric<err> values
|
||||
#2 Enable +CME ERROR result code and use verbose<err> values
|
||||
# here value received is 1
|
||||
elif at_received.startswith('AT+CMEE='):
|
||||
sendToTTY('\rOK\r')
|
||||
|
||||
# Network registration events
|
||||
# AT+CREGNetwork registration (ver. 2)
|
||||
# Description:
|
||||
# Controls the presentation of an unsolicited result code +CREG : <stat>
|
||||
# when <n>=1 and there is a change in the ME network registration status or
|
||||
# code +CREG: <stat>[,<lac>,<ci>] when <n>=2 and there is a change of thenetwork cell.
|
||||
# Read command returns the status of result code presentation and an integer <stat>,
|
||||
# which shows whether the network has currently indicated the registration of the ME.
|
||||
# Location information elements <lac> and <ci> are returned only when <n>=2 and ME
|
||||
# is registered in the network.
|
||||
# <n>:
|
||||
# 0 Disable network registration unsolicited result code. Default value
|
||||
# 1 Enable network registration unsolicited result code,+CREG: <stat>
|
||||
# 2 Enable network registration and location information unsolicited result code, +CREG:<stat>[,<lac>,<ci>]
|
||||
# <stat>:
|
||||
# 0 not registered new operator to registered and not searching
|
||||
# 1 registered, home network
|
||||
# 2 not registered, currently searching a new operator to register with
|
||||
# 3 registration denied
|
||||
# 4 unknown
|
||||
# 5 registered, roaming
|
||||
elif at_received == 'AT+CREG=2':
|
||||
sendToTTY('\rOK\r')
|
||||
sendToTTY('+CREG: 1,00C3,01021A02 \r')
|
||||
|
||||
elif at_received == 'AT+CREG=1':
|
||||
sendToTTY('\rOK\r')
|
||||
sendToTTY('+CREG: 1\r')
|
||||
|
||||
elif at_received == 'AT+CREG?':
|
||||
sendToTTY('+CREG: 1,00C3,01021A02\r\nOK\r')
|
||||
|
||||
|
||||
|
||||
# GPRS registration events
|
||||
# +CGREGNetwork registration reporting
|
||||
# Packet domain network registration status AT+CGPADDRShow PDP address
|
||||
# Description:
|
||||
# Controls the presentation of the unsolicited result code +CGREG: <stat>
|
||||
# when <n>='1' and there is a change in the ME GPRS network registration status or
|
||||
# +CGREG: <stat>[,<lac>,<ci>] when <n>='2' and there is achange of the network cell.
|
||||
# ---
|
||||
# Note: If the GPRS MT also supports circuit mode services,
|
||||
# AT+CREG and the +CREG result code apply to the registration status and location
|
||||
# information for those services. The read command returns the status of result
|
||||
# code presentation and an integer <stat> which shows whether the network has
|
||||
# currently indicated the registration of the ME.
|
||||
# Location information elements <lac> and <ci> are returned only when <n>=2
|
||||
# and ME is registered in the network.
|
||||
elif at_received == 'AT+CGREG=1':
|
||||
sendToTTY('\rOK\r')
|
||||
sendToTTY('+CGREG: 1\r')
|
||||
|
||||
elif at_received == 'AT+CGREG?':
|
||||
sendToTTY('+CGREG: 0,1\r\nOK\r')
|
||||
|
||||
|
||||
|
||||
# Call Waiting notifications
|
||||
elif at_received == 'AT+CCWA=1':
|
||||
sendToTTY('\rOK\r')
|
||||
|
||||
# Alternating voice/data off
|
||||
elif at_received == 'AT+CMOD=0':
|
||||
sendToTTY('\rOK\r')
|
||||
|
||||
# +CSSU unsolicited supp service notifications
|
||||
elif at_received == 'AT+CSSN=0,1':
|
||||
sendToTTY('\rOK\r')
|
||||
|
||||
# no connected at_received identification
|
||||
elif at_received == 'AT+COLP=0':
|
||||
sendToTTY('+COLP:0\r\nOK\r')
|
||||
|
||||
# HEX character set
|
||||
# AT+CSCSSelect TE character set (ver. 3)
|
||||
elif at_received == 'AT+CSCS=\"HEX\"':
|
||||
sendToTTY('\rOK\r')
|
||||
|
||||
# USSD unsolicited
|
||||
# AT+CUSD Unstructured supplementary service data (ver. 2)
|
||||
# <n>
|
||||
# 0 Disable result code presentation in the TA.Defaultvalue
|
||||
# 1 Enable result code presentation in the TA
|
||||
# 2 Terminate (abort) USSD dialogue. This value is not applicable to the read command response. Notsupported
|
||||
elif at_received == 'AT+CUSD=1':
|
||||
sendToTTY('\rOK\r')
|
||||
|
||||
# Enable +CGEV GPRS event notifications, but don't buffer
|
||||
# AT+CGEREPPacket domain event reporting (ver. 1)
|
||||
elif at_received == 'AT+CGEREP=1,0':
|
||||
sendToTTY('\rOK\r')
|
||||
|
||||
# SMS PDU mode
|
||||
# AT+CMGF Message format (ver. 1)
|
||||
elif at_received == 'AT+CMGF=0':
|
||||
sendToTTY('\rOK\r')
|
||||
|
||||
elif at_received == 'AT+CPIN?':
|
||||
sendToTTY('\r+CPIN: READY\r\nOK\r')
|
||||
#sendToTTY('\rOK\r')
|
||||
|
||||
# AT+CFUNSet phone functionality (ver. 2)
|
||||
# 0 Minimum functionality, that is, the phone is turnedoff. Default value
|
||||
# 1 Full functionality, that is, the phone is turned on
|
||||
# 2 Disable phone transmit RF circuits only. Notsupported
|
||||
# 3 Disable phone receive RF circuits only. Notsupported
|
||||
# 4 Disable phone transmit and receive RF circuits.Note: This is often referred to as "flight mode"
|
||||
# 5 GSM only (WCDMA radio off)
|
||||
# 6 WCDMA only (GSM radio off)
|
||||
elif at_received == 'AT+CFUN?':
|
||||
sendToTTY('+CFUN: 1\r\nOK\r')
|
||||
|
||||
elif at_received == 'AT+CFUN=1':
|
||||
sendToTTY('\rOK\r')
|
||||
|
||||
# AT+CLCCList current calls
|
||||
# Description:
|
||||
# Returns the list of current calls. If command succeeds but no calls areavailable, no information response is sent to TE
|
||||
elif at_received == 'AT+CLCC':
|
||||
sendToTTY('+CLCC: \r\nOK\r')
|
||||
|
||||
# AT+COPSOperator selection (ver. 2)
|
||||
# AT+COPS=[<mode>[,<format>[,<oper>[,AcT]]]]
|
||||
#
|
||||
# <mode> Description
|
||||
# 0 Automatic (<oper> field is ignored.) Default value
|
||||
# 1 Manual (<oper> field will be present)
|
||||
# 2 Deregister from network. Not supported
|
||||
# 3 Set only <format> (for read command +COPS?), donot attempt registration/deregistration (<oper> field is ignored).
|
||||
# This value is not applicable in readcommand response
|
||||
# 4 Manual/automatic (<oper> field will be present). Ifmanual selection fails, automatic mode (<mode>=0)is entered
|
||||
elif at_received == 'AT+COPS=3,0;+COPS?;+COPS=3,1;+COPS?;+COPS=3,2;+COPS?':
|
||||
sendToTTY('+COPS: 0,0, \"Free - Mobile\"\r\n+COPS: 0,1, \"Free\"\r\n+COPS: 0,2, \"310170\"\r\nOK\r')
|
||||
|
||||
elif at_received == 'AT+COPS?':
|
||||
#sendToTTY('+COPS: 0,0, \"Free - Mobile\"\r\n+COPS: 0,1, \"Free\"\r\n+COPS: 0,2, \"310170\"\r\nOK\r')
|
||||
sendToTTY('+COPS: 0,0, \"Free - Mobile\"\r\nOK\r')
|
||||
|
||||
elif at_received == 'AT+COPS=0':
|
||||
#sendToTTY('+COPS: 0,0, \"Free - Mobile\"\r\n+COPS: 0,1, \"Free\"\r\n+COPS: 0,2, \"310170\"\r\nOK\r')
|
||||
sendToTTY('+COPS: 0,0, \"Free - Mobile\"\r\nOK\r')
|
||||
|
||||
# IMEI
|
||||
elif at_received == 'AT+CGSN':
|
||||
sendToTTY('+CGSN:534500314160207\r\nOK\r')
|
||||
|
||||
# Signal quality (ver.1)
|
||||
# Returns received signal strength indication <rssi> and channel bit errorrate <ber> from the phone.
|
||||
elif at_received == 'AT+CSQ':
|
||||
#31,7
|
||||
sendToTTY('+CSQ:8,7\r\nOK\r')
|
||||
|
||||
|
||||
|
||||
else:
|
||||
sendToTTY('\rOK\r')
|
||||
|
||||
|
||||
@@ -0,0 +1,20 @@
|
||||
all: oaisim naslite_netlink_ether
|
||||
|
||||
oaisim:
|
||||
(cd $(OPENAIR_TARGETS)/SIMU/USER && make oaisim OAI_NW_DRIVER_TYPE_ETHERNET=1 NAS_NETLINK=1)
|
||||
naslite_netlink_ether:
|
||||
(cd $(OPENAIR2_DIR) && make naslite_netlink_ether.ko)
|
||||
(cd $(OPENAIR2_DIR)/NAS/DRIVER/LITE/RB_TOOL/ && make)
|
||||
|
||||
remserial:
|
||||
(cd $(OPENAIR3_DIR)/UTILS/REMSERIAL-1.4.UDP && make all)
|
||||
(cp -upv $(OPENAIR3_DIR)/UTILS/REMSERIAL-1.4.UDP/remserial /usr/bin/remserial.udp)
|
||||
|
||||
one_eNB_one_UE: oaisim naslite_netlink_ether
|
||||
|
||||
userclean: clean oaisim naslite_netlink_ether
|
||||
|
||||
clean:
|
||||
(cd $(OPENAIR_TARGETS)/SIMU/USER && make clean)
|
||||
(cd $(OPENAIR2_DIR)/NAS/DRIVER/LITE && make clean)
|
||||
(cd $(OPENAIR2_DIR) && make clean)
|
||||
@@ -0,0 +1,86 @@
|
||||
#!/bin/sh
|
||||
echo "Bringup eNB interface"
|
||||
|
||||
ip link set oai0 down
|
||||
rmmod nasmesh
|
||||
make naslite_netlink_ether oaisim
|
||||
insmod $OPENAIR2_DIR/NAS/DRIVER/LITE/nasmesh.ko nas_IMEI=3,9,1,8,3,6,6,2,0,0,0,0,0,0
|
||||
|
||||
#avoid conflict with reserved multicast addresses (224.0.0.11,224.0.0.13, 224.0.0.16)
|
||||
#route add -net 224.0.0.0 netmask 240.0.0.0 dev eth2
|
||||
#ip addr add dev eth1 192.168.14.145/24 broadcast 192.168.14.255
|
||||
ip link set oai0 broadcast ff:ff:ff:ff:ff:ff
|
||||
#ip route add 192.168.14.0/24 dev eth2
|
||||
ip route add 224.0.0.160/28 dev eth1
|
||||
ip link set oai0 up
|
||||
sleep 1
|
||||
|
||||
EXTIF="eth0"
|
||||
INTIF="oai0"
|
||||
IPTABLES=/sbin/iptables
|
||||
#IPTABLES=/usr/local/sbin/iptables
|
||||
DEPMOD=/sbin/depmod
|
||||
MODPROBE=/sbin/modprobe
|
||||
echo " External Interface: $EXTIF"
|
||||
echo " Internal Interface: $INTIF"
|
||||
echo "----------------------------------------------------------------------"
|
||||
echo -en "ip_tables, "
|
||||
$MODPROBE ip_tables
|
||||
echo -en "ip_conntrack, "
|
||||
$MODPROBE ip_conntrack
|
||||
echo -en "ip_conntrack_irc, "
|
||||
$MODPROBE ip_conntrack_irc
|
||||
echo -en "iptable_nat, "
|
||||
$MODPROBE iptable_nat
|
||||
echo -e " Done loading modules.\n"
|
||||
echo " Enabling forwarding.."
|
||||
echo "1" > /proc/sys/net/ipv4/ip_forward
|
||||
echo " Enabling DynamicAddr.."
|
||||
echo "1" > /proc/sys/net/ipv4/ip_dynaddr
|
||||
echo " Clearing any existing rules and setting default policy.."
|
||||
$IPTABLES -P INPUT ACCEPT
|
||||
$IPTABLES -F INPUT
|
||||
$IPTABLES -P OUTPUT ACCEPT
|
||||
$IPTABLES -F OUTPUT
|
||||
$IPTABLES -P FORWARD DROP
|
||||
$IPTABLES -F FORWARD
|
||||
$IPTABLES -t nat -F
|
||||
$IPTABLES -t mangle -F
|
||||
$IPTABLES -t filter -F
|
||||
echo " FWD: Allow all connections OUT and only existing and related ones IN"
|
||||
$IPTABLES -A FORWARD -i $EXTIF -o $INTIF -m state --state ESTABLISHED,RELATED -j ACCEPT
|
||||
$IPTABLES -A FORWARD -i $INTIF -o $EXTIF -j ACCEPT
|
||||
#$IPTABLES -A FORWARD -j LOG
|
||||
echo " Enabling SNAT (MASQUERADE) functionality on $EXTIF"
|
||||
$IPTABLES -t nat -A POSTROUTING -o $EXTIF -j MASQUERADE
|
||||
|
||||
|
||||
|
||||
ifconfig oai0 10.0.1.1 netmask 255.255.255.0 broadcast 10.0.1.255
|
||||
sleep 1
|
||||
#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -s 10.0.1.1 -t 10.0.1.2 -r 3
|
||||
ip addr add dev oai0 2001:1::1/64
|
||||
# -a -> Add RB
|
||||
# -d -> Delete RB
|
||||
# -cxx -> lcr (uid of a cx_entity)
|
||||
# -ixx -> instance
|
||||
# -zxx -> dscp
|
||||
# -fxxx -> classref (uid of a classifier entry) if fn is used , fn is used for send classifier and n+1 for receive classifier
|
||||
# -sxxx -> source ipv4 address
|
||||
# -txxx -> destination ipv4 address
|
||||
# -x -> source ipv6 address
|
||||
# -y -> destination ipv6 address
|
||||
# -r -> radio bearer id
|
||||
echo "rb_tool -a -c0 -i0 -f0 -z0 -x 2001:1::1/128 -y 2001:1::2/128 -r 3"
|
||||
$OPENAIR2_DIR/NAS/DRIVER/LITE/RB_TOOL/rb_tool -a -c0 -i0 -f0 -z0 -x 2001:1::1/128 -y 2001:1::2/128 -r 3
|
||||
|
||||
echo "rb_tool -a -c0 -i0 -f2 -z63 -s 10.0.1.1/32 -t 10.0.1.2/32 -r 3"
|
||||
$OPENAIR2_DIR/NAS/DRIVER/LITE/RB_TOOL/rb_tool -a -c0 -i0 -f2 -z64 -s 10.0.1.1/32 -t 10.0.1.2/32 -r 3
|
||||
|
||||
echo "rb_tool -a -c0 -i0 -f2 -z63 -s 10.0.1.1/32 -t 10.0.1.2/32 -r 3"
|
||||
$OPENAIR2_DIR/NAS/DRIVER/LITE/RB_TOOL/rb_tool -a -c0 -i0 -f4 -z64 -s 0.0.0.0/32 -t 0.0.0.0/32 -r 3
|
||||
|
||||
echo "to see eNB stats, please run : watch_enb script"
|
||||
echo "$OPENAIR_TARGETS/SIMU/USER/oaisim -u0 -M0 -p2 -g3 -l3 > /dev/null"
|
||||
nice -10 $OPENAIR_TARGETS/SIMU/USER/oaisim -u0 -M0 -p2 -g3 -l3 | grep RLC
|
||||
echo "End"
|
||||
@@ -0,0 +1,320 @@
|
||||
#!/bin/bash
|
||||
#
|
||||
#------------------------------------------------
|
||||
MAKE_IP_DRIVER_TARGET="naslite_netlink_ether"
|
||||
MAKE_LTE_ACCESS_STRATUM_TARGET="oaisim"
|
||||
IP_DRIVER_NAME=oai_nw_drv
|
||||
###########################################################
|
||||
# CONFIGURE OPTIONS
|
||||
EMULIF="eth1"
|
||||
LTEIF="oai0"
|
||||
EXTIF="eth0"
|
||||
INTIF=$LTEIF
|
||||
#----------------------------------------------------------
|
||||
LTE_NETWORK_CIDR="10.0.1.0/24"
|
||||
ENB_IPv4="10.0.1.1"
|
||||
ENB_IPv6="2001:1::1"
|
||||
ENB_IPv6_CIDR=$ENB_IPv6"/64"
|
||||
ENB_IPv4_CIDR=$ENB_IPv4"/24"
|
||||
ENB_IF_ID="3,9,1,8,3,6,6,2,0,0,0,0,0,0"
|
||||
#----------------------------------------------------------
|
||||
UE_IPv4="10.0.1.2"
|
||||
UE_IPv6="2001:1::2"
|
||||
UE_IPv6_CIDR=$UE_IPv6"/64"
|
||||
UE_IPv4_CIDR=$UE_IPv4"/24"
|
||||
#----------------------------------------------------------
|
||||
|
||||
# +-------+ +-------+
|
||||
# | eNB | EMULIF | UE |
|
||||
# | +---------------------+ |
|
||||
# | | | |
|
||||
# | | | |
|
||||
# | | | |
|
||||
# | | | |
|
||||
# | | | |
|
||||
# | | | |
|
||||
# | | LTEIF | |
|
||||
# | +.................... + |
|
||||
# | |ENB_IPv4 UE_IPv4_CIDR| |
|
||||
# +-------+ LTE link over +-------+
|
||||
# UDP over ethernet
|
||||
###########################################################
|
||||
IPTABLES=/sbin/iptables
|
||||
THIS_SCRIPT_PATH=$(dirname $(readlink -f $0))
|
||||
declare -x OPENAIR_DIR=""
|
||||
declare -x OPENAIR1_DIR=""
|
||||
declare -x OPENAIR2_DIR=""
|
||||
declare -x OPENAIR3_DIR=""
|
||||
declare -x OPENAIR_TARGETS=""
|
||||
###########################################################
|
||||
|
||||
|
||||
black='\E[30m'
|
||||
red='\E[31m'
|
||||
green='\E[32m'
|
||||
yellow='\E[33m'
|
||||
blue='\E[34m'
|
||||
magenta='\E[35m'
|
||||
cyan='\E[36m'
|
||||
white='\E[37m'
|
||||
|
||||
ROOT_UID=0
|
||||
E_NOTROOT=67
|
||||
|
||||
|
||||
cecho() # Color-echo
|
||||
# arg1 = message
|
||||
# arg2 = color
|
||||
{
|
||||
local default_msg="No Message."
|
||||
message=${1:-$default_msg}
|
||||
color=${2:-$black}
|
||||
echo -e "$color"
|
||||
echo -n "$message"
|
||||
tput sgr0
|
||||
echo
|
||||
return
|
||||
}
|
||||
|
||||
echo_error() {
|
||||
local my_string=""
|
||||
until [ -z "$1" ]
|
||||
do
|
||||
my_string="$my_string$1"
|
||||
shift
|
||||
done
|
||||
cecho "$my_string" $red
|
||||
}
|
||||
|
||||
echo_warning() {
|
||||
local my_string=""
|
||||
until [ -z "$1" ]
|
||||
do
|
||||
my_string="$my_string$1"
|
||||
shift
|
||||
done
|
||||
cecho "$my_string" $yellow
|
||||
}
|
||||
|
||||
echo_success() {
|
||||
local my_string=""
|
||||
until [ -z "$1" ]
|
||||
do
|
||||
my_string="$my_string$1"
|
||||
shift
|
||||
done
|
||||
cecho "$my_string" $green
|
||||
}
|
||||
|
||||
set_openair() {
|
||||
path=`pwd`
|
||||
declare -i length_path
|
||||
declare -i index
|
||||
length_path=${#path}
|
||||
|
||||
index=`echo $path | grep -b -o 'targets' | cut -d: -f1`
|
||||
#echo ${path%$token*}
|
||||
if [[ $index -lt $length_path && index -gt 0 ]]
|
||||
then
|
||||
declare -x OPENAIR_DIR
|
||||
index=`expr $index - 1`
|
||||
openair_path=`echo $path | cut -c1-$index`
|
||||
#openair_path=`echo ${path:0:$index}`
|
||||
export OPENAIR_DIR=$openair_path
|
||||
export OPENAIR1_DIR=$openair_path/openair1
|
||||
export OPENAIR2_DIR=$openair_path/openair2
|
||||
export OPENAIR3_DIR=$openair_path/openair3
|
||||
export OPENAIR_TARGETS=$openair_path/targets
|
||||
return 0
|
||||
fi
|
||||
return -1
|
||||
}
|
||||
|
||||
bash_exec() {
|
||||
output=$($1 2>&1)
|
||||
result=$?
|
||||
if [ $result -eq 0 ]
|
||||
then
|
||||
echo_success "$1"
|
||||
else
|
||||
echo_error "$1: $output"
|
||||
fi
|
||||
}
|
||||
|
||||
wait_process_started () {
|
||||
if [ -z "$1" ]
|
||||
then
|
||||
echo_error "WAITING FOR PROCESS START: NO PROCESS"
|
||||
return 1
|
||||
fi
|
||||
ps -C $1 > /dev/null 2>&1
|
||||
while [ $? -ne 0 ]; do
|
||||
echo_warning "WAITING FOR $1 START"
|
||||
sleep 2
|
||||
ps -C $1 > /dev/null 2>&1
|
||||
done
|
||||
echo_success "PROCESS $1 STARTED"
|
||||
return 0
|
||||
}
|
||||
|
||||
assert() {
|
||||
# If condition false
|
||||
# exit from script with error message
|
||||
E_PARAM_ERR=98
|
||||
E_PARAM_FAILED=99
|
||||
|
||||
if [ -z "$2" ] # Not enought parameters passed.
|
||||
then
|
||||
return $E_PARAM_ERR
|
||||
fi
|
||||
|
||||
lineno=$2
|
||||
if [ ! $1 ]
|
||||
then
|
||||
echo "Assertion failed: \"$1\""
|
||||
echo "File \"$0\", line $lineno"
|
||||
exit $E_ASSERT_FAILED
|
||||
fi
|
||||
}
|
||||
|
||||
#bash_exec "set_openair"
|
||||
set_openair
|
||||
cecho "OPENAIR_DIR = $OPENAIR_DIR" $green
|
||||
cecho "OPENAIR1_DIR = $OPENAIR1_DIR" $green
|
||||
cecho "OPENAIR2_DIR = $OPENAIR2_DIR" $green
|
||||
cecho "OPENAIR3_DIR = $OPENAIR3_DIR" $green
|
||||
cecho "OPENAIR_TARGETS = $OPENAIR_TARGETS" $green
|
||||
|
||||
|
||||
echo "Bringup UE interface"
|
||||
bash_exec "rmmod $IP_DRIVER_NAME"
|
||||
cecho "make $MAKE_IP_DRIVER_TARGET $MAKE_LTE_ACCESS_STRATUM_TARGET....." $green
|
||||
bash_exec "make $MAKE_IP_DRIVER_TARGET $MAKE_LTE_ACCESS_STRATUM_TARGET"
|
||||
bash_exec "insmod $OPENAIR2_DIR/NAS/DRIVER/LITE/$IP_DRIVER_NAME.ko oai_nw_drv_IMEI=$ENB_IF_ID"
|
||||
|
||||
|
||||
echo " Enabling proxy ARP.."
|
||||
bash_exec "sysctl -w net.ipv4.conf.all.proxy_arp=1"
|
||||
assert "`sysctl -n net.ipv4.conf.all.proxy_arp` -eq 1" $LINENO
|
||||
|
||||
echo " Enabling ipv4 forwarding.."
|
||||
bash_exec "sysctl -w net.ipv4.ip_forward=1"
|
||||
assert "`sysctl -n net.ipv4.ip_forward` -eq 1" $LINENO
|
||||
|
||||
bash_exec "sysctl -w net.ipv4.conf.all.forwarding=1"
|
||||
assert "`sysctl -n net.ipv4.conf.all.forwarding` -eq 1" $LINENO
|
||||
|
||||
echo " Enabling ipv6 forwarding.."
|
||||
bash_exec "sysctl -w net.ipv6.conf.all.forwarding=1"
|
||||
assert "`sysctl -n net.ipv6.conf.all.forwarding` -eq 1" $LINENO
|
||||
|
||||
echo " Enabling DynamicAddr.."
|
||||
bash_exec "sysctl -w net.ipv4.ip_dynaddr=1"
|
||||
assert " `sysctl -n net.ipv4.ip_dynaddr` -eq 1" $LINENO
|
||||
|
||||
bash_exec "ip route flush cache"
|
||||
bash_exec "ip route add 239.0.0.160/28 dev $EMULIF"
|
||||
|
||||
bash_exec "ip link set $LTEIF broadcast ff:ff:ff:ff:ff:ff"
|
||||
bash_exec "ip link set $LTEIF up"
|
||||
sleep 1
|
||||
|
||||
|
||||
assert " -x $IPTABLES " $LINENO
|
||||
|
||||
bash_exec "$IPTABLES -P INPUT ACCEPT"
|
||||
bash_exec "$IPTABLES -F INPUT"
|
||||
bash_exec "$IPTABLES -P OUTPUT ACCEPT"
|
||||
bash_exec "$IPTABLES -F OUTPUT"
|
||||
bash_exec "$IPTABLES -P FORWARD DROP"
|
||||
bash_exec "$IPTABLES -F FORWARD"
|
||||
bash_exec "$IPTABLES -t nat -F"
|
||||
bash_exec "$IPTABLES -t mangle -F"
|
||||
bash_exec "$IPTABLES -t filter -F"
|
||||
|
||||
|
||||
|
||||
echo " External Interface: $EXTIF"
|
||||
echo " Internal Interface: $INTIF"
|
||||
|
||||
bash_exec "modprobe ip_tables"
|
||||
bash_exec "modprobe ip_conntrack"
|
||||
bash_exec "modprobe ip_conntrack_ftp"
|
||||
bash_exec "modprobe nf_conntrack_h323"
|
||||
bash_exec "modprobe nf_conntrack_irc"
|
||||
bash_exec "modprobe nf_conntrack_pptp"
|
||||
bash_exec "modprobe nf_conntrack_proto_gre"
|
||||
bash_exec "modprobe nf_conntrack_proto_sctp"
|
||||
bash_exec "modprobe nf_conntrack_tftp"
|
||||
bash_exec "modprobe nf_conntrack_sip"
|
||||
bash_exec "modprobe iptable_nat"
|
||||
bash_exec "modprobe x_tables"
|
||||
|
||||
|
||||
bash_exec "sysctl -w net.ipv4.conf.all.log_martians=1"
|
||||
assert " `sysctl -n net.ipv4.conf.all.log_martians` -eq 1" $LINENO
|
||||
|
||||
bash_exec "sysctl -w net.ipv4.conf.$LTEIF.log_martians=1"
|
||||
assert " `sysctl -n net.ipv4.conf.$LTEIF.log_martians` -eq 1" $LINENO
|
||||
|
||||
bash_exec "sysctl -w net.ipv4.conf.$EXTIF.log_martians=1"
|
||||
assert " `sysctl -n net.ipv4.conf.$EXTIF.log_martians` -eq 1" $LINENO
|
||||
|
||||
bash_exec "sysctl -w net.ipv4.conf.$INTIF.log_martians=1"
|
||||
assert " `sysctl -n net.ipv4.conf.$INTIF.log_martians` -eq 1" $LINENO
|
||||
|
||||
echo " Disabling reverse path filtering"
|
||||
bash_exec "sysctl -w net.ipv4.conf.all.rp_filter=0"
|
||||
assert " `sysctl -n net.ipv4.conf.all.rp_filter` -eq 0" $LINENO
|
||||
|
||||
bash_exec "sysctl -w net.ipv4.conf.$LTEIF.rp_filter=0"
|
||||
assert " `sysctl -n net.ipv4.conf.$LTEIF.rp_filter` -eq 0" $LINENO
|
||||
|
||||
bash_exec "sysctl -w net.ipv4.conf.$EXTIF.rp_filter=0"
|
||||
assert " `sysctl -n net.ipv4.conf.$EXTIF.rp_filter` -eq 0" $LINENO
|
||||
|
||||
bash_exec "sysctl -w net.ipv4.conf.$INTIF.rp_filter=0"
|
||||
assert " `sysctl -n net.ipv4.conf.$INTIF.rp_filter` -eq 0" $LINENO
|
||||
|
||||
|
||||
bash_exec "$IPTABLES -A FORWARD -i $EXTIF -o $INTIF -m state --state ESTABLISHED,RELATED -j ACCEPT"
|
||||
bash_exec "$IPTABLES -A FORWARD -i $INTIF -o $EXTIF -j ACCEPT"
|
||||
bash_exec "$IPTABLES -t nat -A POSTROUTING -o $EXTIF -j MASQUERADE"
|
||||
|
||||
bash_exec "ip route flush cache"
|
||||
|
||||
|
||||
bash_exec "ip addr add dev $LTEIF $ENB_IPv4_CIDR"
|
||||
sleep 1
|
||||
bash_exec "ip addr add dev $LTEIF $ENB_IPv6_CIDR"
|
||||
sleep 1
|
||||
|
||||
# -a -> Add RB
|
||||
# -d -> Delete RB
|
||||
# -cxx -> lcr
|
||||
# -ixx -> instance
|
||||
# -zxx -> dscp
|
||||
# -fxxx -> classref (uid of a classifier entry) if fn is used , fn is used for send classifier and n+1 for receive classifier
|
||||
# -sxxx -> source ipv4 address
|
||||
# -txxx -> destination ipv4 address
|
||||
# -x -> source ipv6 address
|
||||
# -y -> destination ipv6 address
|
||||
# -r -> radio bearer id
|
||||
bash_exec "$OPENAIR2_DIR/NAS/DRIVER/LITE/RB_TOOL/rb_tool -a -c0 -f0 -i0 -z0 -x $ENB_IPv6 -y $UE_IPv6 -r 3"
|
||||
bash_exec "$OPENAIR2_DIR/NAS/DRIVER/LITE/RB_TOOL/rb_tool -a -c0 -f2 -i0 -z64 -s $ENB_IPv4/32 -t $UE_IPv4/32 -r 3"
|
||||
bash_exec "$OPENAIR2_DIR/NAS/DRIVER/LITE/RB_TOOL/rb_tool -a -c0 -f4 -i0 -z64 -s 0.0.0.0/32 -t 0.0.0.0/32 -r 3"
|
||||
sleep 1
|
||||
|
||||
echo "#####################################################################"
|
||||
echo "iptables -t nat -nvL"
|
||||
echo "---------------------------------------------------------------------"
|
||||
iptables -t nat -nvL
|
||||
echo "#####################################################################"
|
||||
echo "ip route show table main"
|
||||
echo "---------------------------------------------------------------------"
|
||||
ip route show table main
|
||||
|
||||
echo "$OPENAIR_TARGETS/SIMU/USER/oaisim -u0 -M0 -p2 -g3 -l3 > /dev/null"
|
||||
nice -10 $OPENAIR_TARGETS/SIMU/USER/oaisim -u0 -M0 -p2 -g3 -l3 > /dev/null
|
||||
|
||||
|
||||
@@ -0,0 +1,259 @@
|
||||
#!/bin/bash
|
||||
#
|
||||
#------------------------------------------------
|
||||
MAKE_IP_DRIVER_TARGET="naslite_netlink_ether"
|
||||
MAKE_LTE_ACCESS_STRATUM_TARGET="oaisim"
|
||||
IP_DRIVER_NAME=oai_nw_drv
|
||||
###########################################################
|
||||
# CONFIGURE OPTIONS
|
||||
EMULIF="eth0"
|
||||
LTEIF="oai0"
|
||||
|
||||
#----------------------------------------------------------
|
||||
LTE_NETWORK_CIDR="10.0.1.0/24"
|
||||
ENB_IPv4="10.0.1.1"
|
||||
ENB_IPv6="2001:1::1"
|
||||
#----------------------------------------------------------
|
||||
UE_IPv4="10.0.1.2"
|
||||
UE_IPv6="2001:1::2"
|
||||
UE_IPv6_CIDR=$UE_IPv6"/64"
|
||||
UE_IPv4_CIDR=$UE_IPv4"/24"
|
||||
UE_IMEI="3,9,1,8,3,6,7,3,0,0,0,0,0,0"
|
||||
#----------------------------------------------------------
|
||||
|
||||
# +-------+ +-------+
|
||||
# | eNB | EMULIF | UE |
|
||||
# | +---------------------+ +
|
||||
# | | | |
|
||||
# | | | |
|
||||
# | | | |
|
||||
# | | | |
|
||||
# | | | +
|
||||
# | | | |
|
||||
# | | LTEIF | |
|
||||
# | +.................... + |
|
||||
# | |ENB_IPv4 UE_IPv4_CIDR| |
|
||||
# +-------+ LTE link over +-------+
|
||||
|
||||
###########################################################
|
||||
IPTABLES=/sbin/iptables
|
||||
THIS_SCRIPT_PATH=$(dirname $(readlink -f $0))
|
||||
declare -x OPENAIR_DIR=""
|
||||
declare -x OPENAIR1_DIR=""
|
||||
declare -x OPENAIR2_DIR=""
|
||||
declare -x OPENAIR3_DIR=""
|
||||
declare -x OPENAIR_TARGETS=""
|
||||
###########################################################
|
||||
|
||||
|
||||
black='\E[30m'
|
||||
red='\E[31m'
|
||||
green='\E[32m'
|
||||
yellow='\E[33m'
|
||||
blue='\E[34m'
|
||||
magenta='\E[35m'
|
||||
cyan='\E[36m'
|
||||
white='\E[37m'
|
||||
|
||||
ROOT_UID=0
|
||||
E_NOTROOT=67
|
||||
|
||||
|
||||
cecho() # Color-echo
|
||||
# arg1 = message
|
||||
# arg2 = color
|
||||
{
|
||||
local default_msg="No Message."
|
||||
message=${1:-$default_msg}
|
||||
color=${2:-$black}
|
||||
echo -e "$color"
|
||||
echo -n "$message"
|
||||
tput sgr0
|
||||
echo
|
||||
return
|
||||
}
|
||||
|
||||
echo_error() {
|
||||
local my_string=""
|
||||
until [ -z "$1" ]
|
||||
do
|
||||
my_string="$my_string$1"
|
||||
shift
|
||||
done
|
||||
cecho "$my_string" $red
|
||||
}
|
||||
|
||||
echo_warning() {
|
||||
local my_string=""
|
||||
until [ -z "$1" ]
|
||||
do
|
||||
my_string="$my_string$1"
|
||||
shift
|
||||
done
|
||||
cecho "$my_string" $yellow
|
||||
}
|
||||
|
||||
echo_success() {
|
||||
local my_string=""
|
||||
until [ -z "$1" ]
|
||||
do
|
||||
my_string="$my_string$1"
|
||||
shift
|
||||
done
|
||||
cecho "$my_string" $green
|
||||
}
|
||||
|
||||
set_openair() {
|
||||
path=`pwd`
|
||||
declare -i length_path
|
||||
declare -i index
|
||||
length_path=${#path}
|
||||
|
||||
index=`echo $path | grep -b -o 'targets' | cut -d: -f1`
|
||||
#echo ${path%$token*}
|
||||
if [[ $index -lt $length_path && index -gt 0 ]]
|
||||
then
|
||||
declare -x OPENAIR_DIR
|
||||
index=`expr $index - 1`
|
||||
openair_path=`echo $path | cut -c1-$index`
|
||||
#openair_path=`echo ${path:0:$index}`
|
||||
export OPENAIR_DIR=$openair_path
|
||||
export OPENAIR1_DIR=$openair_path/openair1
|
||||
export OPENAIR2_DIR=$openair_path/openair2
|
||||
export OPENAIR3_DIR=$openair_path/openair3
|
||||
export OPENAIR_TARGETS=$openair_path/targets
|
||||
return 0
|
||||
fi
|
||||
return -1
|
||||
}
|
||||
|
||||
bash_exec() {
|
||||
output=$($1 2>&1)
|
||||
result=$?
|
||||
if [ $result -eq 0 ]
|
||||
then
|
||||
echo_success "$1"
|
||||
else
|
||||
echo_error "$1: $output"
|
||||
fi
|
||||
}
|
||||
|
||||
wait_process_started () {
|
||||
if [ -z "$1" ]
|
||||
then
|
||||
echo_error "WAITING FOR PROCESS START: NO PROCESS"
|
||||
return 1
|
||||
fi
|
||||
ps -C $1 > /dev/null 2>&1
|
||||
while [ $? -ne 0 ]; do
|
||||
echo_warning "WAITING FOR $1 START"
|
||||
sleep 2
|
||||
ps -C $1 > /dev/null 2>&1
|
||||
done
|
||||
echo_success "PROCESS $1 STARTED"
|
||||
return 0
|
||||
}
|
||||
|
||||
assert() {
|
||||
# If condition false
|
||||
# exit from script with error message
|
||||
E_PARAM_ERR=98
|
||||
E_PARAM_FAILED=99
|
||||
|
||||
if [ -z "$2" ] # Not enought parameters passed.
|
||||
then
|
||||
return $E_PARAM_ERR
|
||||
fi
|
||||
|
||||
lineno=$2
|
||||
if [ ! $1 ]
|
||||
then
|
||||
echo "Assertion failed: \"$1\""
|
||||
echo "File \"$0\", line $lineno"
|
||||
exit $E_ASSERT_FAILED
|
||||
fi
|
||||
}
|
||||
|
||||
ctrl_c() {
|
||||
bash_exec "pkill oaisim"
|
||||
bash_exec "ip link set $LTEIF down"
|
||||
|
||||
bash_exec "rmmod $IP_DRIVER_NAME"
|
||||
|
||||
bash_exec "$IPTABLES -P INPUT ACCEPT"
|
||||
bash_exec "$IPTABLES -F INPUT"
|
||||
bash_exec "$IPTABLES -P OUTPUT ACCEPT"
|
||||
bash_exec "$IPTABLES -F OUTPUT"
|
||||
bash_exec "$IPTABLES -P FORWARD ACCEPT"
|
||||
bash_exec "$IPTABLES -F FORWARD"
|
||||
bash_exec "$IPTABLES -t nat -F"
|
||||
bash_exec "$IPTABLES -t mangle -F"
|
||||
bash_exec "$IPTABLES -t filter -F"
|
||||
bash_exec "ip route flush cache"
|
||||
}
|
||||
|
||||
#bash_exec "set_openair"
|
||||
set_openair
|
||||
cecho "OPENAIR_DIR = $OPENAIR_DIR" $green
|
||||
cecho "OPENAIR1_DIR = $OPENAIR1_DIR" $green
|
||||
cecho "OPENAIR2_DIR = $OPENAIR2_DIR" $green
|
||||
cecho "OPENAIR3_DIR = $OPENAIR3_DIR" $green
|
||||
cecho "OPENAIR_TARGETS = $OPENAIR_TARGETS" $green
|
||||
|
||||
echo "Bringup UE interface"
|
||||
bash_exec "rmmod $IP_DRIVER_NAME"
|
||||
cecho "make $MAKE_IP_DRIVER_TARGET $MAKE_LTE_ACCESS_STRATUM_TARGET ....." $green
|
||||
bash_exec "make $MAKE_IP_DRIVER_TARGET $MAKE_LTE_ACCESS_STRATUM_TARGET "
|
||||
bash_exec "insmod $OPENAIR2_DIR/NAS/DRIVER/LITE/$IP_DRIVER_NAME.ko oai_nw_drv_IMEI=$UE_IMEI"
|
||||
|
||||
bash_exec "ip route flush cache"
|
||||
bash_exec "ip route add 239.0.0.160/28 dev $EMULIF"
|
||||
|
||||
bash_exec "ip link set $LTEIF broadcast ff:ff:ff:ff:ff:ff"
|
||||
bash_exec "ip link set $LTEIF up"
|
||||
sleep 1
|
||||
bash_exec "ip addr add dev $LTEIF $UE_IPv4_CIDR"
|
||||
bash_exec "ip addr add dev $LTEIF $UE_IPv6_CIDR"
|
||||
|
||||
# -a -> Add RB
|
||||
# -d -> Delete RB
|
||||
# -cxx -> lcr
|
||||
# -ixx -> instance
|
||||
# -zxx -> dscp
|
||||
# -fxxx -> classref (uid of a classifier entry) if fn is used , fn is used for send classifier and n+1 for receive classifier
|
||||
# -sxxx -> source ipv4 address
|
||||
# -txxx -> destination ipv4 address
|
||||
# -x -> source ipv6 address
|
||||
# -y -> destination ipv6 address
|
||||
# -r -> radio bearer id
|
||||
bash_exec "$OPENAIR2_DIR/NAS/DRIVER/LITE/RB_TOOL/rb_tool -a -c0 -f0 -i0 -z0 -x $UE_IPv6 -y $ENB_IPv6 -r 3"
|
||||
bash_exec "$OPENAIR2_DIR/NAS/DRIVER/LITE/RB_TOOL/rb_tool -a -c0 -f2 -i0 -z64 -s $UE_IPv4/32 -t $ENB_IPv4/32 -r 3"
|
||||
bash_exec "$OPENAIR2_DIR/NAS/DRIVER/LITE/RB_TOOL/rb_tool -a -c0 -f4 -i0 -z64 -s 0.0.0.0/32 -t 0.0.0.0/32 -r 3"
|
||||
sleep 1
|
||||
|
||||
bash_exec "sysctl -w net.ipv4.conf.all.log_martians=1"
|
||||
assert " `sysctl -n net.ipv4.conf.all.log_martians` -eq 1" $LINENO
|
||||
|
||||
echo " Disabling reverse path filtering"
|
||||
bash_exec "sysctl -w net.ipv4.conf.all.rp_filter=0"
|
||||
assert " `sysctl -n net.ipv4.conf.all.rp_filter` -eq 0" $LINENO
|
||||
|
||||
|
||||
bash_exec "ip route flush cache"
|
||||
|
||||
echo "#####################################################################"
|
||||
echo "ip route show table main"
|
||||
echo "---------------------------------------------------------------------"
|
||||
ip route show table main
|
||||
|
||||
trap ctrl_c INT
|
||||
|
||||
echo "to see UE stats, please run : watch_ue script"
|
||||
echo "$OPENAIR_TARGETS/SIMU/USER/oaisim -b0 -M1 -p2 -g3 -l3 > /dev/null"
|
||||
nice -10 $OPENAIR_TARGETS/SIMU/USER/oaisim -b0 -M1 -p2 -g3 -l3 > /dev/null
|
||||
#gdb $OPENAIR_TARGETS/SIMU/USER/oaisim
|
||||
echo "End"
|
||||
ctrl_c
|
||||
|
||||
|
||||
|
||||
+426
@@ -0,0 +1,426 @@
|
||||
#!/bin/bash
|
||||
#
|
||||
#------------------------------------------------
|
||||
MAKE_IP_DRIVER_TARGET="naslite_netlink_ether"
|
||||
MAKE_LTE_ACCESS_STRATUM_TARGET="oaisim"
|
||||
MAKE_REMSERIAL_TARGET="remserial"
|
||||
IP_DRIVER_NAME=oai_nw_drv
|
||||
###########################################################
|
||||
# CONFIGURE OPTIONS
|
||||
EMULIF="eth0"
|
||||
LTEIF="oai0"
|
||||
|
||||
INTIF="ppp0"
|
||||
EXTIF=$LTEIF
|
||||
#----------------------------------------------------------
|
||||
LTE_NETWORK_CIDR="10.0.1.0/24"
|
||||
ENB_IPv4="10.0.1.1"
|
||||
ENB_IPv6="2001:1::1"
|
||||
#----------------------------------------------------------
|
||||
UE_IPv4="10.0.1.2"
|
||||
UE_IPv6="2001:1::2"
|
||||
UE_IPv6_CIDR=$UE_IPv6"/64"
|
||||
UE_IPv4_CIDR=$UE_IPv4"/24"
|
||||
UE_IMEI="3,9,1,8,3,6,7,3,0,0,0,0,0,0"
|
||||
#----------------------------------------------------------
|
||||
USE_PPP="yes"
|
||||
PPP_OPTIONS="proxyarp passive nodetach ipcp-accept-remote"
|
||||
PPP_DEVICE="ttyPPP_DROID"
|
||||
PPP_SPEED="460800"
|
||||
UE_PPP_IPv4="192.168.15.1"
|
||||
TERMINAL_PPP_IPv4="192.168.15.175"
|
||||
REMSERIAL_UDP_PORT="23001"
|
||||
#----------------------------------------------------------
|
||||
|
||||
# +-------+ +-------+ +-------+
|
||||
# | eNB | EMULIF | UE |INTIF |ANDROID|
|
||||
# | +---------------------+ +---------------------+ TERMIN|
|
||||
# | | | | ppp link over | AL |
|
||||
# | | | | UDP over ethernet | |
|
||||
# | | | | (remserial) | |
|
||||
# | | | | | |
|
||||
# | | | +---serial link-------+ |
|
||||
# | | | | for AT commands | |
|
||||
# | | LTEIF | | | |
|
||||
# | +.................... + | | |
|
||||
# | |ENB_IPv4 UE_IPv4_CIDR| | | |
|
||||
# +-------+ LTE link over +-------+ +-------+
|
||||
|
||||
###########################################################
|
||||
IPTABLES=/sbin/iptables
|
||||
THIS_SCRIPT_PATH=$(dirname $(readlink -f $0))
|
||||
declare -x OPENAIR_DIR=""
|
||||
declare -x OPENAIR1_DIR=""
|
||||
declare -x OPENAIR2_DIR=""
|
||||
declare -x OPENAIR3_DIR=""
|
||||
declare -x OPENAIR_TARGETS=""
|
||||
###########################################################
|
||||
|
||||
|
||||
black='\E[30m'
|
||||
red='\E[31m'
|
||||
green='\E[32m'
|
||||
yellow='\E[33m'
|
||||
blue='\E[34m'
|
||||
magenta='\E[35m'
|
||||
cyan='\E[36m'
|
||||
white='\E[37m'
|
||||
|
||||
ROOT_UID=0
|
||||
E_NOTROOT=67
|
||||
|
||||
|
||||
cecho() # Color-echo
|
||||
# arg1 = message
|
||||
# arg2 = color
|
||||
{
|
||||
local default_msg="No Message."
|
||||
message=${1:-$default_msg}
|
||||
color=${2:-$black}
|
||||
echo -e "$color"
|
||||
echo -n "$message"
|
||||
tput sgr0
|
||||
echo
|
||||
return
|
||||
}
|
||||
|
||||
echo_error() {
|
||||
local my_string=""
|
||||
until [ -z "$1" ]
|
||||
do
|
||||
my_string="$my_string$1"
|
||||
shift
|
||||
done
|
||||
cecho "$my_string" $red
|
||||
}
|
||||
|
||||
echo_warning() {
|
||||
local my_string=""
|
||||
until [ -z "$1" ]
|
||||
do
|
||||
my_string="$my_string$1"
|
||||
shift
|
||||
done
|
||||
cecho "$my_string" $yellow
|
||||
}
|
||||
|
||||
echo_success() {
|
||||
local my_string=""
|
||||
until [ -z "$1" ]
|
||||
do
|
||||
my_string="$my_string$1"
|
||||
shift
|
||||
done
|
||||
cecho "$my_string" $green
|
||||
}
|
||||
|
||||
set_openair() {
|
||||
path=`pwd`
|
||||
declare -i length_path
|
||||
declare -i index
|
||||
length_path=${#path}
|
||||
|
||||
index=`echo $path | grep -b -o 'targets' | cut -d: -f1`
|
||||
#echo ${path%$token*}
|
||||
if [[ $index -lt $length_path && index -gt 0 ]]
|
||||
then
|
||||
declare -x OPENAIR_DIR
|
||||
index=`expr $index - 1`
|
||||
openair_path=`echo $path | cut -c1-$index`
|
||||
#openair_path=`echo ${path:0:$index}`
|
||||
export OPENAIR_DIR=$openair_path
|
||||
export OPENAIR1_DIR=$openair_path/openair1
|
||||
export OPENAIR2_DIR=$openair_path/openair2
|
||||
export OPENAIR3_DIR=$openair_path/openair3
|
||||
export OPENAIR_TARGETS=$openair_path/targets
|
||||
return 0
|
||||
fi
|
||||
return -1
|
||||
}
|
||||
|
||||
bash_exec() {
|
||||
output=$($1 2>&1)
|
||||
result=$?
|
||||
if [ $result -eq 0 ]
|
||||
then
|
||||
echo_success "$1"
|
||||
else
|
||||
echo_error "$1: $output"
|
||||
fi
|
||||
}
|
||||
|
||||
wait_process_started () {
|
||||
if [ -z "$1" ]
|
||||
then
|
||||
echo_error "WAITING FOR PROCESS START: NO PROCESS"
|
||||
return 1
|
||||
fi
|
||||
ps -C $1 > /dev/null 2>&1
|
||||
while [ $? -ne 0 ]; do
|
||||
echo_warning "WAITING FOR $1 START"
|
||||
sleep 2
|
||||
ps -C $1 > /dev/null 2>&1
|
||||
done
|
||||
echo_success "PROCESS $1 STARTED"
|
||||
return 0
|
||||
}
|
||||
|
||||
assert() {
|
||||
# If condition false
|
||||
# exit from script with error message
|
||||
E_PARAM_ERR=98
|
||||
E_PARAM_FAILED=99
|
||||
|
||||
if [ -z "$2" ] # Not enought parameters passed.
|
||||
then
|
||||
return $E_PARAM_ERR
|
||||
fi
|
||||
|
||||
lineno=$2
|
||||
if [ ! $1 ]
|
||||
then
|
||||
echo "Assertion failed: \"$1\""
|
||||
echo "File \"$0\", line $lineno"
|
||||
exit $E_ASSERT_FAILED
|
||||
fi
|
||||
}
|
||||
|
||||
ctrl_c() {
|
||||
bash_exec "pkill oaisim"
|
||||
if [ "$USE_PPP"x = yesx ]; then
|
||||
bash_exec "pkill remserial.bash"
|
||||
bash_exec "pkill ppp_android.bash"
|
||||
fi
|
||||
bash_exec "pkill AT_serial_bouchon.py"
|
||||
bash_exec "ip link set $LTEIF down"
|
||||
|
||||
bash_exec "ip route del default via $ENB_IPv4 dev $EXTIF table int2lte"
|
||||
bash_exec "ip route flush table int2lte"
|
||||
bash_exec "ip rule del prio 1000"
|
||||
|
||||
bash_exec "rmmod $IP_DRIVER_NAME"
|
||||
|
||||
bash_exec "$IPTABLES -P INPUT ACCEPT"
|
||||
bash_exec "$IPTABLES -F INPUT"
|
||||
bash_exec "$IPTABLES -P OUTPUT ACCEPT"
|
||||
bash_exec "$IPTABLES -F OUTPUT"
|
||||
bash_exec "$IPTABLES -P FORWARD ACCEPT"
|
||||
bash_exec "$IPTABLES -F FORWARD"
|
||||
bash_exec "$IPTABLES -t nat -F"
|
||||
bash_exec "$IPTABLES -t mangle -F"
|
||||
bash_exec "$IPTABLES -t filter -F"
|
||||
bash_exec "ip route flush cache"
|
||||
}
|
||||
|
||||
#bash_exec "set_openair"
|
||||
set_openair
|
||||
cecho "OPENAIR_DIR = $OPENAIR_DIR" $green
|
||||
cecho "OPENAIR1_DIR = $OPENAIR1_DIR" $green
|
||||
cecho "OPENAIR2_DIR = $OPENAIR2_DIR" $green
|
||||
cecho "OPENAIR3_DIR = $OPENAIR3_DIR" $green
|
||||
cecho "OPENAIR_TARGETS = $OPENAIR_TARGETS" $green
|
||||
|
||||
echo "Bringup UE interface"
|
||||
bash_exec "rmmod $IP_DRIVER_NAME"
|
||||
cecho "make $MAKE_IP_DRIVER_TARGET $MAKE_LTE_ACCESS_STRATUM_TARGET $MAKE_REMSERIAL_TARGET....." $green
|
||||
bash_exec "make $MAKE_IP_DRIVER_TARGET $MAKE_LTE_ACCESS_STRATUM_TARGET $MAKE_REMSERIAL_TARGET"
|
||||
bash_exec "insmod $OPENAIR2_DIR/NAS/DRIVER/LITE/$IP_DRIVER_NAME.ko oai_nw_drv_IMEI=$UE_IMEI"
|
||||
|
||||
|
||||
echo " Enabling ipv4 forwarding.."
|
||||
bash_exec "sysctl -w net.ipv4.ip_forward=1"
|
||||
assert "`sysctl -n net.ipv4.ip_forward` -eq 1" $LINENO
|
||||
|
||||
bash_exec "sysctl -w net.ipv4.conf.all.forwarding=1"
|
||||
assert "`sysctl -n net.ipv4.conf.all.forwarding` -eq 1" $LINENO
|
||||
|
||||
echo " Enabling ipv6 forwarding.."
|
||||
bash_exec "sysctl -w net.ipv6.conf.all.forwarding=1"
|
||||
assert "`sysctl -n net.ipv6.conf.all.forwarding` -eq 1" $LINENO
|
||||
|
||||
|
||||
if [ "$USE_PPP"x = yesx ]; then
|
||||
echo " PPP enabled.."
|
||||
command -v pppd > /dev/null 2>&1 || { echo_error "pppd executable needed - please install it"; exit 1;}
|
||||
command -v remserial.udp > /dev/null 2>&1 || { echo_error "remserial.udp executable needed - please install it"; exit 1;}
|
||||
#generate pppd script
|
||||
rm -f /tmp/ppp_android.bash
|
||||
bash_exec "touch /tmp/ppp_android.bash"
|
||||
if [ ! -f /tmp/ppp_android.bash ]; then
|
||||
echo_error "Cannot generate /tmp/ppp_android.bash file, exiting"
|
||||
exit 1
|
||||
fi
|
||||
echo "#!/bin/bash" >> /tmp/ppp_android.bash
|
||||
echo "pppd $PPP_OPTIONS $UE_PPP_IPv4:$TERMINAL_PPP_IPv4 /dev/$PPP_DEVICE $PPP_SPEED" >> /tmp/ppp_android.bash
|
||||
bash_exec "chmod 777 /tmp/ppp_android.bash"
|
||||
assert " -x /tmp/ppp_android.bash " $LINENO
|
||||
|
||||
#generate remserial script
|
||||
rm -f /tmp/remserial.bash
|
||||
bash_exec "touch /tmp/remserial.bash"
|
||||
if [ ! -f /tmp/remserial.bash ]; then
|
||||
echo_error "Cannot generate /tmp/remserial.bash file, exiting"
|
||||
exit 1
|
||||
fi
|
||||
echo "#!/bin/bash" >> /tmp/remserial.bash
|
||||
echo "remserial.udp -s \"$PPP_SPEED raw\" -p $REMSERIAL_UDP_PORT -l /dev/$PPP_DEVICE /dev/ptmx" >> /tmp/remserial.bash
|
||||
bash_exec "chmod 777 /tmp/remserial.bash"
|
||||
assert " -x /tmp/remserial.bash " $LINENO
|
||||
fi
|
||||
|
||||
xterm -e $THIS_SCRIPT_PATH/AT_serial_bouchon.py &
|
||||
wait_process_started AT_serial_bouchon.py
|
||||
|
||||
if [ "$USE_PPP"x = yesx ]; then
|
||||
xterm -e /tmp/remserial.bash &
|
||||
wait_process_started remserial.bash
|
||||
|
||||
xterm -e /tmp/ppp_android.bash &
|
||||
wait_process_started ppp_android.bash
|
||||
fi
|
||||
|
||||
|
||||
assert " -x $IPTABLES " $LINENO
|
||||
|
||||
bash_exec "ip route del default via $ENB_IPv4 dev $EXTIF table int2lte"
|
||||
bash_exec "ip route flush table int2lte"
|
||||
bash_exec "ip rule del prio 1000"
|
||||
|
||||
bash_exec "$IPTABLES -P INPUT ACCEPT"
|
||||
bash_exec "$IPTABLES -F INPUT"
|
||||
bash_exec "$IPTABLES -P OUTPUT ACCEPT"
|
||||
bash_exec "$IPTABLES -F OUTPUT"
|
||||
bash_exec "$IPTABLES -P FORWARD DROP"
|
||||
bash_exec "$IPTABLES -F FORWARD"
|
||||
bash_exec "$IPTABLES -t nat -F"
|
||||
bash_exec "$IPTABLES -t mangle -F"
|
||||
bash_exec "$IPTABLES -t filter -F"
|
||||
|
||||
bash_exec "ip route flush cache"
|
||||
bash_exec "ip route add 239.0.0.160/28 dev $EMULIF"
|
||||
|
||||
bash_exec "ip link set $LTEIF broadcast ff:ff:ff:ff:ff:ff"
|
||||
bash_exec "ip link set $LTEIF up"
|
||||
sleep 1
|
||||
bash_exec "ip addr add dev $LTEIF $UE_IPv4_CIDR"
|
||||
bash_exec "ip addr add dev $LTEIF $UE_IPv6_CIDR"
|
||||
|
||||
echo " Enabling proxy ARP.."
|
||||
bash_exec "sysctl -w net.ipv4.conf.all.proxy_arp=1"
|
||||
assert "`sysctl -n net.ipv4.conf.all.proxy_arp` -eq 1" $LINENO
|
||||
|
||||
|
||||
# -a -> Add RB
|
||||
# -d -> Delete RB
|
||||
# -cxx -> lcr
|
||||
# -ixx -> instance
|
||||
# -zxx -> dscp
|
||||
# -fxxx -> classref (uid of a classifier entry) if fn is used , fn is used for send classifier and n+1 for receive classifier
|
||||
# -sxxx -> source ipv4 address
|
||||
# -txxx -> destination ipv4 address
|
||||
# -x -> source ipv6 address
|
||||
# -y -> destination ipv6 address
|
||||
# -r -> radio bearer id
|
||||
bash_exec "$OPENAIR2_DIR/NAS/DRIVER/LITE/RB_TOOL/rb_tool -a -c0 -f0 -i0 -z0 -x $UE_IPv6 -y $ENB_IPv6 -r 3"
|
||||
bash_exec "$OPENAIR2_DIR/NAS/DRIVER/LITE/RB_TOOL/rb_tool -a -c0 -f2 -i0 -z64 -s $UE_IPv4/32 -t $ENB_IPv4/32 -r 3"
|
||||
bash_exec "$OPENAIR2_DIR/NAS/DRIVER/LITE/RB_TOOL/rb_tool -a -c0 -f4 -i0 -z64 -s 0.0.0.0/32 -t 0.0.0.0/32 -r 3"
|
||||
sleep 1
|
||||
|
||||
echo " External Interface: $EXTIF"
|
||||
echo " Internal Interface: $INTIF"
|
||||
|
||||
bash_exec "modprobe ip_tables"
|
||||
bash_exec "modprobe ip_conntrack"
|
||||
bash_exec "modprobe ip_conntrack_ftp"
|
||||
bash_exec "modprobe nf_conntrack_h323"
|
||||
bash_exec "modprobe nf_conntrack_irc"
|
||||
bash_exec "modprobe nf_conntrack_pptp"
|
||||
bash_exec "modprobe nf_conntrack_proto_gre"
|
||||
bash_exec "modprobe nf_conntrack_proto_sctp"
|
||||
bash_exec "modprobe nf_conntrack_tftp"
|
||||
bash_exec "modprobe nf_conntrack_sip"
|
||||
bash_exec "modprobe iptable_nat"
|
||||
bash_exec "modprobe x_tables"
|
||||
|
||||
echo " Enabling DynamicAddr.."
|
||||
bash_exec "sysctl -w net.ipv4.ip_dynaddr=1"
|
||||
assert " `sysctl -n net.ipv4.ip_dynaddr` -eq 1" $LINENO
|
||||
|
||||
bash_exec "sysctl -w net.ipv4.conf.all.log_martians=1"
|
||||
assert " `sysctl -n net.ipv4.conf.all.log_martians` -eq 1" $LINENO
|
||||
|
||||
bash_exec "sysctl -w net.ipv4.conf.$LTEIF.log_martians=1"
|
||||
assert " `sysctl -n net.ipv4.conf.$LTEIF.log_martians` -eq 1" $LINENO
|
||||
|
||||
bash_exec "sysctl -w net.ipv4.conf.$EMULIF.log_martians=1"
|
||||
assert " `sysctl -n net.ipv4.conf.$EMULIF.log_martians` -eq 1" $LINENO
|
||||
|
||||
if [ ! "$USE_PPP"x = yesx ]; then
|
||||
bash_exec "sysctl -w net.ipv4.conf.$INTIF.log_martians=1"
|
||||
assert " `sysctl -n net.ipv4.conf.$INTIF.log_martians` -eq 1" $LINENO
|
||||
fi
|
||||
echo " Disabling reverse path filtering"
|
||||
bash_exec "sysctl -w net.ipv4.conf.all.rp_filter=0"
|
||||
assert " `sysctl -n net.ipv4.conf.all.rp_filter` -eq 0" $LINENO
|
||||
|
||||
bash_exec "sysctl -w net.ipv4.conf.$LTEIF.rp_filter=0"
|
||||
assert " `sysctl -n net.ipv4.conf.$LTEIF.rp_filter` -eq 0" $LINENO
|
||||
|
||||
bash_exec "sysctl -w net.ipv4.conf.$EMULIF.rp_filter=0"
|
||||
assert " `sysctl -n net.ipv4.conf.$EMULIF.rp_filter` -eq 0" $LINENO
|
||||
|
||||
if [ ! "$USE_PPP"x = yesx ]; then
|
||||
bash_exec "sysctl -w net.ipv4.conf.$INTIF.rp_filter=0"
|
||||
assert " `sysctl -n net.ipv4.conf.$INTIF.rp_filter` -eq 0" $LINENO
|
||||
fi
|
||||
|
||||
bash_exec "$IPTABLES -t mangle -A PREROUTING -i $INTIF -j MARK --set-mark 22"
|
||||
|
||||
bash_exec "$IPTABLES -A FORWARD -i $EXTIF -o $INTIF -m state --state ESTABLISHED,RELATED -j ACCEPT"
|
||||
bash_exec "$IPTABLES -A FORWARD -i $INTIF -o $EXTIF -j ACCEPT"
|
||||
bash_exec "$IPTABLES -t nat -A POSTROUTING -o $EXTIF -j MASQUERADE"
|
||||
|
||||
bash_exec "ip route add 127.0.0.0/8 dev lo table int2lte"
|
||||
bash_exec "ip route add $LTE_NETWORK_CIDR dev $EXTIF table int2lte scope link"
|
||||
bash_exec "ip route add default via $ENB_IPv4 dev $EXTIF table int2lte scope global"
|
||||
|
||||
bash_exec "ip route flush cache"
|
||||
|
||||
bash_exec "ip rule add fwmark 22 lookup int2lte prio 1000"
|
||||
|
||||
echo "#####################################################################"
|
||||
echo "iptables -t nat -nvL"
|
||||
echo "---------------------------------------------------------------------"
|
||||
iptables -t nat -nvL
|
||||
echo "#####################################################################"
|
||||
echo "iptables -t mangle -nvL"
|
||||
echo "---------------------------------------------------------------------"
|
||||
iptables -t mangle -nvL
|
||||
echo "#####################################################################"
|
||||
echo "iptables -t filter -nvL"
|
||||
echo "---------------------------------------------------------------------"
|
||||
iptables -t filter -nvL
|
||||
echo "#####################################################################"
|
||||
echo "ip rule show"
|
||||
echo "---------------------------------------------------------------------"
|
||||
ip rule show
|
||||
echo "#####################################################################"
|
||||
echo "ip route show table int2lte"
|
||||
echo "---------------------------------------------------------------------"
|
||||
ip route show table int2lte
|
||||
echo "#####################################################################"
|
||||
echo "ip route show table main"
|
||||
echo "---------------------------------------------------------------------"
|
||||
ip route show table main
|
||||
|
||||
trap ctrl_c INT
|
||||
|
||||
echo "to see UE stats, please run : watch_ue script"
|
||||
echo "$OPENAIR_TARGETS/SIMU/USER/oaisim -b0 -M1 -p2 -g3 -l3 > /dev/null"
|
||||
nice -10 $OPENAIR_TARGETS/SIMU/USER/oaisim -b0 -M1 -p2 -g3 -l3 > /dev/null
|
||||
#gdb $OPENAIR_TARGETS/SIMU/USER/oaisim
|
||||
echo "End"
|
||||
ctrl_c
|
||||
|
||||
|
||||
|
||||
@@ -0,0 +1,13 @@
|
||||
all: oaisim nasmesh
|
||||
|
||||
userclean: clean oaisim nasmesh
|
||||
|
||||
oaisim:
|
||||
(cd $(OPENAIR_TARGETS)/SIMU/USER && make NAS=1 -j2)
|
||||
nasmesh:
|
||||
(cd $(OPENAIR2_DIR) && make nasmesh_netlink.ko)
|
||||
(cd $(OPENAIR2_DIR)/NAS/DRIVER/MESH/RB_TOOL/ && make)
|
||||
|
||||
clean:
|
||||
(cd $(OPENAIR_TARGETS)/SIMU/USER && make clean)
|
||||
|
||||
+34
@@ -0,0 +1,34 @@
|
||||
#!/bin/sh
|
||||
echo "Bringup eNB interface"
|
||||
|
||||
sudo rmmod nasmesh
|
||||
make all
|
||||
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko
|
||||
|
||||
#avoid conflict with reserved multicast addresses (224.0.0.11,224.0.0.13, 224.0.0.16)
|
||||
#sudo route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0
|
||||
sudo ip route add 239.0.0.160/28 dev eth0
|
||||
|
||||
|
||||
sudo ifconfig oai0 10.0.1.1 netmask 255.255.255.0 broadcast 10.0.1.255
|
||||
|
||||
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -s 10.0.1.1 -t 10.0.1.2 -r 3
|
||||
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -s 10.0.1.1 -t 10.0.1.3 -r 11
|
||||
|
||||
#xterm -T ENB -hold -e ping 10.0.1.2&
|
||||
#xterm -T ENB -hold -e ping 10.0.1.3&
|
||||
|
||||
if [ -z $1 ]; then
|
||||
echo "nice -10 $OPENAIR_TARGETS/SIMU/USER/oaisim -u0 -M0 -p3 -g3 -l3 > /dev/null"
|
||||
nice -10 $OPENAIR_TARGETS/SIMU/USER/oaisim -u0 -M0 -p3 -g3 -l3 > /dev/null
|
||||
else
|
||||
if [ $1 = "all" ]; then
|
||||
echo "nice -10 $OPENAIR_TARGETS/SIMU/USER/oaisim -u0 -M0 -p3 -g3 -l7"
|
||||
nice -10 $OPENAIR_TARGETS/SIMU/USER/oaisim -u0 -M0 -p3 -g3 -l7
|
||||
else
|
||||
echo "nice -10 $OPENAIR_TARGETS/SIMU/USER/oaisim -u0 -M0 -p3 -g3 -l7 | grep -i $1"
|
||||
nice -10 $OPENAIR_TARGETS/SIMU/USER/oaisim -u0 -M0 -p3 -g3 -l7 | grep -i $1
|
||||
fi
|
||||
fi
|
||||
|
||||
echo "End"
|
||||
+31
@@ -0,0 +1,31 @@
|
||||
#!/bin/sh
|
||||
echo "Bringup UE interface"
|
||||
sudo rmmod nasmesh
|
||||
make all
|
||||
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko
|
||||
|
||||
#avoid conflict with reserved multicast addresses (224.0.0.11,224.0.0.13, 224.0.0.16)
|
||||
#sudo route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0
|
||||
sudo ip route add 239.0.0.160/28 dev eth0
|
||||
|
||||
|
||||
sudo ifconfig oai0 10.0.1.2 netmask 255.255.255.0 broadcast 10.0.1.255
|
||||
|
||||
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -s 10.0.1.2 -t 10.0.1.1 -r 3
|
||||
|
||||
#xterm -T UE1 -hold -e ping 10.0.1.1&
|
||||
|
||||
if [ -z $1 ]; then
|
||||
echo "nice -10 $OPENAIR_TARGETS/SIMU/USER/oaisim -b0 -M1 -p3 -g3 -l3 > /dev/null"
|
||||
nice -10 $OPENAIR_TARGETS/SIMU/USER/oaisim -b0 -M1 -p3 -g3 -l3 > /dev/null
|
||||
else
|
||||
if [ $1 = "all" ]; then
|
||||
echo "nice -10 $OPENAIR_TARGETS/SIMU/USER/oaisim -b0 -M1 -p3 -g3 -l7"
|
||||
nice -10 $OPENAIR_TARGETS/SIMU/USER/oaisim -b0 -M1 -p3 -g3 -l7
|
||||
else
|
||||
echo "nice -10 $OPENAIR_TARGETS/SIMU/USER/oaisim -b0 -M1 -p3 -g3 -l7 | grep -i $1"
|
||||
nice -10 $OPENAIR_TARGETS/SIMU/USER/oaisim -b0 -M1 -p3 -g3 -l7 | grep -i $1
|
||||
fi
|
||||
fi
|
||||
|
||||
echo "End"
|
||||
+30
@@ -0,0 +1,30 @@
|
||||
#!/bin/sh
|
||||
echo "Bringup UE interface"
|
||||
sudo rmmod nasmesh
|
||||
make all
|
||||
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko
|
||||
|
||||
#avoid conflict with reserved multicast addresses (224.0.0.11,224.0.0.13, 224.0.0.16)
|
||||
#sudo route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0
|
||||
sudo ip route add 239.0.0.160/28 dev eth0
|
||||
|
||||
sudo ifconfig oai0 10.0.1.3 netmask 255.255.255.0 broadcast 10.0.1.255
|
||||
|
||||
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -s 10.0.1.3 -t 10.0.1.1 -r 3
|
||||
|
||||
#xterm -T UE2 -hold -e ping 10.0.1.1&
|
||||
|
||||
if [ -z $1 ]; then
|
||||
echo "nice -10 $OPENAIR_TARGETS/SIMU/USER/oaisim -b0 -M2 -p3 -g3 -l3 > /dev/null"
|
||||
nice -10 $OPENAIR_TARGETS/SIMU/USER/oaisim -b0 -M2 -p3 -g3 -l3 > /dev/null
|
||||
else
|
||||
if [ $1 = "all" ]; then
|
||||
echo "nice -10 $OPENAIR_TARGETS/SIMU/USER/oaisim -b0 -M2 -p3 -g3 -l7"
|
||||
nice -10 $OPENAIR_TARGETS/SIMU/USER/oaisim -b0 -M2 -p3 -g3 -l7
|
||||
else
|
||||
echo "nice -10 $OPENAIR_TARGETS/SIMU/USER/oaisim -b0 -M2 -p3 -g3 -l7 | grep -i $1"
|
||||
nice -10 $OPENAIR_TARGETS/SIMU/USER/oaisim -b0 -M2 -p3 -g3 -l7 | grep -i $1
|
||||
fi
|
||||
fi
|
||||
|
||||
echo "End"
|
||||
@@ -0,0 +1,4 @@
|
||||
|
||||
This is the folder used by the OCG(openair config generation) to parse a xml-based scenario defined by the user in the WEBXML directory, and produce emulation results in the RESULTS directory.
|
||||
|
||||
Please make sure that you have correctly set the OPENAIR_TARGETS variables.
|
||||
@@ -0,0 +1,143 @@
|
||||
<OAI_EMULATION>
|
||||
<ENVIRONMENT_SYSTEM_CONFIG>
|
||||
<FADING>
|
||||
<LARGE_SCALE>urban</LARGE_SCALE> <!-- OPTIONS: urban, rural, indoor -->
|
||||
<FREE_SPACE_MODEL_PARAMETERS>
|
||||
<PATHLOSS_EXPONENT>2.0</PATHLOSS_EXPONENT> <!-- OPTIONS: >1 -->
|
||||
<PATHLOSS_0_dB>-50</PATHLOSS_0_dB>
|
||||
</FREE_SPACE_MODEL_PARAMETERS>
|
||||
<SMALL_SCALE>Rayleigh1</SMALL_SCALE> <!-- OPTIONS: SCM_A, SCM_B, SCM_C, SCM_D, EPA, EVA, ETU, Rayleigh8, Rayleigh1, Rayleigh1_corr, Rayleigh1_anticorr, Rice8, Rice1, Rice1_corr, Rice1_anticorr, AWGN -->
|
||||
</FADING>
|
||||
<WALL_PENETRATION_LOSS_dB>5</WALL_PENETRATION_LOSS_dB>
|
||||
<SYSTEM_BANDWIDTH_MB>7.68</SYSTEM_BANDWIDTH_MB>
|
||||
<UE_FREQUENCY_GHz>1.9</UE_FREQUENCY_GHz>
|
||||
<ANTENNA>
|
||||
<eNB_ANTENNA>
|
||||
<RX_NOISE_LEVEL_dB>5</RX_NOISE_LEVEL_dB>
|
||||
<NUMBER_OF_SECTORS>3</NUMBER_OF_SECTORS>
|
||||
<BEAM_WIDTH_dB>1.13</BEAM_WIDTH_dB>
|
||||
<ANTENNA_GAIN_dBi>16</ANTENNA_GAIN_dBi>
|
||||
<TX_POWER_dBm>40</TX_POWER_dBm>
|
||||
</eNB_ANTENNA>
|
||||
<UE_ANTENNA>
|
||||
<RX_NOISE_LEVEL_dB>1</RX_NOISE_LEVEL_dB>
|
||||
<ANTENNA_GAIN_dBi>5</ANTENNA_GAIN_dBi>
|
||||
<TX_POWER_dBm>20</TX_POWER_dBm>
|
||||
</UE_ANTENNA>
|
||||
</ANTENNA>
|
||||
</ENVIRONMENT_SYSTEM_CONFIG>
|
||||
|
||||
<TOPOLOGY_CONFIG>
|
||||
<AREA>
|
||||
<X_km>1</X_km>
|
||||
<Y_km>1</Y_km>
|
||||
</AREA>
|
||||
<NETWORK_TYPE>homogeneous</NETWORK_TYPE> <!-- OPTIONS: homogeneous, heterogeneous -->
|
||||
<CELL_TYPE>macrocell</CELL_TYPE> <!-- OPTIONS: macrocell, microcell, picocell, femtocell -->
|
||||
<RELAY></RELAY>
|
||||
<MOBILITY>
|
||||
<UE_MOBILITY>
|
||||
<UE_INITIAL_DISTRIBUTION>random</UE_INITIAL_DISTRIBUTION> <!-- OPTIONS: random, concentrated, grid -->
|
||||
<RANDOM_UE_DISTRIBUTION>
|
||||
<NUMBER_OF_NODES>1</NUMBER_OF_NODES>
|
||||
</RANDOM_UE_DISTRIBUTION>
|
||||
<UE_MOBILITY_TYPE>fixed</UE_MOBILITY_TYPE> <!-- OPTIONS: fixed, random_waypoint, random_walk, grid_walk, trace, sumo -->
|
||||
<UE_MOVING_DYNAMICS>
|
||||
<MIN_SPEED_mps>1</MIN_SPEED_mps>
|
||||
<MAX_SPEED_mps>200</MAX_SPEED_mps>
|
||||
<MIN_SLEEP_ms>0.1</MIN_SLEEP_ms>
|
||||
<MAX_SLEEP_ms>5.0</MAX_SLEEP_ms>
|
||||
<MIN_JOURNEY_TIME_ms>0.1</MIN_JOURNEY_TIME_ms>
|
||||
<MAX_JOURNEY_TIME_ms>10</MAX_JOURNEY_TIME_ms>
|
||||
</UE_MOVING_DYNAMICS>
|
||||
<SUMO_CONFIG> <!-- Simulation for Urban Mobility -->
|
||||
<SUMO_CMD> sumo-gui </SUMO_CMD>
|
||||
<SUMO_CONFIG_FILE>$OPENAIR2_DIR/UTIL/OMG/SUMO/SCENARIOS/scen.sumo.cfg</SUMO_CONFIG_FILE>
|
||||
<SUMO_START> 0 </SUMO_START>
|
||||
<SUMO_END> 10 </SUMO_END>
|
||||
<SUMO_STEP> 10</SUMO_STEP>
|
||||
<SUMO_HOST_IP> 127.0.1.1</SUMO_HOST_IP>
|
||||
<SUMO_HOST_PORT> 8883</SUMO_HOST_PORT>
|
||||
</SUMO_CONFIG>
|
||||
</UE_MOBILITY>
|
||||
<eNB_MOBILITY>
|
||||
<eNB_INITIAL_DISTRIBUTION>random</eNB_INITIAL_DISTRIBUTION> <!-- OPTIONS: random, hexagonal, grid -->
|
||||
<RANDOM_eNB_DISTRIBUTION>
|
||||
<NUMBER_OF_CELLS>1</NUMBER_OF_CELLS>
|
||||
</RANDOM_eNB_DISTRIBUTION>
|
||||
|
||||
<eNB_MOBILITY_TYPE>fixed</eNB_MOBILITY_TYPE> <!-- OPTIONS: fixed, mobile -->
|
||||
</eNB_MOBILITY>
|
||||
</MOBILITY>
|
||||
</TOPOLOGY_CONFIG>
|
||||
|
||||
<APPLICATION_CONFIG>
|
||||
<PREDEFINED_TRAFFIC>
|
||||
<SOURCE_ID>0</SOURCE_ID>
|
||||
<APPLICATION_TYPE>gaming_OA</APPLICATION_TYPE> <!-- OPTIONS: scbr, mcbr, bcbr, m2m_AP, m2m_BR, gaming_OA, gaming_TF, full_buffer -->
|
||||
<DESTINATION_ID>1</DESTINATION_ID>
|
||||
</PREDEFINED_TRAFFIC>
|
||||
|
||||
<CUSTOMIZED_TRAFFIC>
|
||||
<PU> <!-- we are generating only one packet -->
|
||||
<PROB_OFF_PU>0.9</PROB_OFF_PU> <!-- prob to transit from off to PU -->
|
||||
<PROB_PU_ED>0.1</PROB_PU_ED> <!-- prob to transit from PU to ED -->
|
||||
<HOLDING_TIME_OFF_PU>100</HOLDING_TIME_OFF_PU> <!-- in off state -->
|
||||
</PU>
|
||||
<ED> <!-- we are generating only one packet -->
|
||||
<PROB_OFF_ED>0.1</PROB_OFF_ED> <!-- prob to transit from off to PU -->
|
||||
<PROB_ED_PE>0.1</PROB_ED_PE> <!-- prob to transit from off to PU -->
|
||||
<HOLDING_TIME_OFF_ED>10000</HOLDING_TIME_OFF_ED> <!-- in off state -->
|
||||
</ED>
|
||||
<PE>
|
||||
<HOLDING_TIME_OFF_PE>100</HOLDING_TIME_OFF_PE> <!-- in off state, how much time we should generate traffic -->
|
||||
</PE>
|
||||
<SOURCE_ID>2</SOURCE_ID> <!-- <SOURCE_ID> 1:100 </SOURCE_ID> -->
|
||||
<TRANSPORT_PROTOCOL>udp</TRANSPORT_PROTOCOL> <!-- OPTIONS: tcp (default), udp -->
|
||||
<IP_VERSION>ipv6</IP_VERSION> <!-- OPTIONS: ipv4 (default), ipv6 -->
|
||||
<DESTINATION_ID>0</DESTINATION_ID>
|
||||
|
||||
<IDT_DIST>uniform</IDT_DIST> <!-- OPTIONS: no_customized_traffic (default), uniform, poission, gaussian, exponential, fixed, weibull, pareto, gamma, cauchy -->
|
||||
<IDT_MIN_ms>100</IDT_MIN_ms>
|
||||
<IDT_MAX_ms>1000</IDT_MAX_ms>
|
||||
<IDT_STANDARD_DEVIATION>1</IDT_STANDARD_DEVIATION>
|
||||
<IDT_LAMBDA>7</IDT_LAMBDA>
|
||||
|
||||
<SIZE_DIST>gaussian</SIZE_DIST> <!-- OPTIONS: no_customized_traffic (default), uniform, poission, gaussian, exponential, fixed, weibull, pareto, gamma, cauchy -->
|
||||
<SIZE_MIN_byte>200</SIZE_MIN_byte>
|
||||
<SIZE_MAX_byte>500</SIZE_MAX_byte>
|
||||
<SIZE_STANDARD_DEVIATION>5</SIZE_STANDARD_DEVIATION>
|
||||
<SIZE_LAMBDA>4</SIZE_LAMBDA>
|
||||
|
||||
|
||||
<DESTINATION_PORT>8080</DESTINATION_PORT>
|
||||
</CUSTOMIZED_TRAFFIC>
|
||||
|
||||
</APPLICATION_CONFIG>
|
||||
|
||||
<EMULATION_CONFIG>
|
||||
<EMULATION_TIME_ms>5000</EMULATION_TIME_ms>
|
||||
|
||||
<PERFORMANCE>
|
||||
<METRICS>
|
||||
<THROUGHPUT>1</THROUGHPUT>
|
||||
<LATENCY></LATENCY>
|
||||
<SIGNALLING_OVERHEAD></SIGNALLING_OVERHEAD>
|
||||
</METRICS>
|
||||
|
||||
<LAYER>
|
||||
<MAC>1</MAC>
|
||||
<RLC></RLC>
|
||||
<PDCP></PDCP>
|
||||
</LAYER>
|
||||
|
||||
<LOG_EMU>
|
||||
<DEBUG>1</DEBUG>
|
||||
</LOG_EMU>
|
||||
<SEED>
|
||||
<SEED_VALUE>1</SEED_VALUE>
|
||||
</SEED>
|
||||
</PERFORMANCE>
|
||||
</EMULATION_CONFIG>
|
||||
<PROFILE>EURECOM</PROFILE>
|
||||
</OAI_EMULATION>
|
||||
@@ -0,0 +1,12 @@
|
||||
|
||||
<OAI_EMULATION>
|
||||
|
||||
<EMULATION_CONFIG>
|
||||
<EMULATION_TIME_ms>500</EMULATION_TIME_ms>
|
||||
<LOG> <!-- set the global log level -->
|
||||
<LEVEL>debug</LEVEL>
|
||||
</LOG>
|
||||
</EMULATION_CONFIG>
|
||||
<PROFILE>EMU-TEST</PROFILE>
|
||||
|
||||
</OAI_EMULATION>
|
||||
@@ -0,0 +1,77 @@
|
||||
<OAI_EMULATION>
|
||||
<TOPOLOGY_CONFIG>
|
||||
<AREA>
|
||||
<X_m>5000</X_m>
|
||||
<Y_m>5000</Y_m>
|
||||
</AREA>
|
||||
<MOBILITY>
|
||||
<UE_MOBILITY>
|
||||
<RANDOM_UE_DISTRIBUTION>
|
||||
<NUMBER_OF_NODES>3</NUMBER_OF_NODES>
|
||||
</RANDOM_UE_DISTRIBUTION>
|
||||
<UE_MOBILITY_TYPE>STATIC</UE_MOBILITY_TYPE>
|
||||
</UE_MOBILITY>
|
||||
<eNB_MOBILITY>
|
||||
<eNB_INITIAL_DISTRIBUTION>random</eNB_INITIAL_DISTRIBUTION>
|
||||
<RANDOM_eNB_DISTRIBUTION>
|
||||
<NUMBER_OF_CELLS>1</NUMBER_OF_CELLS>
|
||||
</RANDOM_eNB_DISTRIBUTION>
|
||||
<eNB_MOBILITY_TYPE>STATIC</eNB_MOBILITY_TYPE>
|
||||
</eNB_MOBILITY>
|
||||
</MOBILITY>
|
||||
</TOPOLOGY_CONFIG>
|
||||
|
||||
<APPLICATION_CONFIG>
|
||||
<PREDEFINED_TRAFFIC>
|
||||
<SOURCE_ID>0</SOURCE_ID>
|
||||
<APPLICATION_TYPE>random</APPLICATION_TYPE> <!-- OPTIONS: scbr,mcbr,bcbr, gaming_OA, gaming_TF, m2m_AP, m2m_BR, , random, ,full_buffer -->
|
||||
<DESTINATION_ID>1:3</DESTINATION_ID>
|
||||
</PREDEFINED_TRAFFIC>
|
||||
|
||||
<CUSTOMIZED_TRAFFIC>
|
||||
<SOURCE_ID>1:2</SOURCE_ID> <!-- <SOURCE_ID> 1:100 </SOURCE_ID> -->
|
||||
<TRANSPORT_PROTOCOL>udp</TRANSPORT_PROTOCOL> <!-- OPTIONS: tcp (default), udp -->
|
||||
<IP_VERSION>ipv6</IP_VERSION> <!-- OPTIONS: ipv4 (default), ipv6 -->
|
||||
<DESTINATION_ID>0</DESTINATION_ID>
|
||||
<!-- available distributions: none (default), uniform, poission, gaussian, exponential,pareto, cauchy,fixed, weibull, gamma,-->
|
||||
<IDT_DIST>poisson</IDT_DIST> <!-- similar for exponential, -->
|
||||
<IDT_LAMBDA>7.3</IDT_LAMBDA>
|
||||
|
||||
<SIZE_DIST>unifrom</SIZE_DIST> <!-- OPTIONS: no_transmission (default), uniform, poission, gaussian, exponential,pareto, cauchy,fixed, weibull, gamma,-->
|
||||
<SIZE_MIN_byte>100</SIZE_MIN_byte>
|
||||
<SIZE_MAX_byte>500</SIZE_MAX_byte>
|
||||
|
||||
</CUSTOMIZED_TRAFFIC>
|
||||
|
||||
<CUSTOMIZED_TRAFFIC>
|
||||
<SOURCE_ID>3</SOURCE_ID> <!-- <SOURCE_ID> 1:100 </SOURCE_ID> -->
|
||||
<TRANSPORT_PROTOCOL>tcp</TRANSPORT_PROTOCOL> <!-- OPTIONS: tcp (default), udp -->
|
||||
<IP_VERSION>ipv4</IP_VERSION> <!-- OPTIONS: ipv4 (default), ipv6 -->
|
||||
<DESTINATION_ID>0</DESTINATION_ID>
|
||||
<!-- available distributions: none (default), uniform, poission, gaussian, exponential,pareto, cauchy,fixed, weibull, gamma,-->
|
||||
<IDT_DIST>fixed</IDT_DIST> <!---->
|
||||
<IDT_MIN_ms>100</IDT_MIN_ms>
|
||||
|
||||
<SIZE_DIST>exponential</SIZE_DIST> <!-- OPTIONS: no_transmission (default), uniform, poission, gaussian, exponential,pareto, cauchy,fixed, weibull, gamma,-->
|
||||
<SIZE_LAMBDA>2.2</SIZE_LAMBDA>
|
||||
|
||||
</CUSTOMIZED_TRAFFIC>
|
||||
|
||||
</APPLICATION_CONFIG>
|
||||
|
||||
<EMULATION_CONFIG>
|
||||
<EMULATION_TIME_ms>0</EMULATION_TIME_ms> <!--set to infinity-->
|
||||
|
||||
<PERFORMANCE_METRICS>
|
||||
<THROUGHPUT>1</THROUGHPUT>
|
||||
</PERFORMANCE_METRICS>
|
||||
<LOG> <!-- set the global log level -->
|
||||
<LEVEL>info</LEVEL>
|
||||
<INTERVAL>1</INTERVAL>
|
||||
</LOG>
|
||||
<SEED_VALUE>1234</SEED_VALUE> <!-- value 0 means randomly generated by OAI -->
|
||||
|
||||
</EMULATION_CONFIG>
|
||||
|
||||
<PROFILE>OTG_3</PROFILE>
|
||||
</OAI_EMULATION>
|
||||
@@ -0,0 +1,123 @@
|
||||
<OAI_EMULATION>
|
||||
<ENVIRONMENT_SYSTEM_CONFIG>
|
||||
<FADING>
|
||||
<LARGE_SCALE>urban</LARGE_SCALE>
|
||||
<FREE_SPACE_MODEL_PARAMETERS>
|
||||
<PATHLOSS_EXPONENT>2.0</PATHLOSS_EXPONENT>
|
||||
<PATHLOSS_0_dB>-50</PATHLOSS_0_dB>
|
||||
</FREE_SPACE_MODEL_PARAMETERS>
|
||||
<SMALL_SCALE>Rayleigh1</SMALL_SCALE>
|
||||
</FADING>
|
||||
<WALL_PENETRATION_LOSS_dB>5</WALL_PENETRATION_LOSS_dB>
|
||||
<SYSTEM_BANDWIDTH_MB>7.68</SYSTEM_BANDWIDTH_MB>
|
||||
<UE_FREQUENCY_GHz>1.9</UE_FREQUENCY_GHz>
|
||||
<ANTENNA>
|
||||
<eNB_ANTENNA>
|
||||
<RX_NOISE_LEVEL_dB>5</RX_NOISE_LEVEL_dB>
|
||||
<NUMBER_OF_SECTORS>3</NUMBER_OF_SECTORS>
|
||||
<BEAM_WIDTH_dB>1.13</BEAM_WIDTH_dB>
|
||||
<ANTENNA_GAIN_dBi>16</ANTENNA_GAIN_dBi>
|
||||
<TX_POWER_dBm>40</TX_POWER_dBm>
|
||||
</eNB_ANTENNA>
|
||||
<UE_ANTENNA>
|
||||
<RX_NOISE_LEVEL_dB>1</RX_NOISE_LEVEL_dB>
|
||||
<ANTENNA_GAIN_dBi>5</ANTENNA_GAIN_dBi>
|
||||
<TX_POWER_dBm>20</TX_POWER_dBm>
|
||||
</UE_ANTENNA>
|
||||
</ANTENNA>
|
||||
</ENVIRONMENT_SYSTEM_CONFIG>
|
||||
|
||||
<TOPOLOGY_CONFIG>
|
||||
<AREA>
|
||||
<X_m>5000</X_m>
|
||||
<Y_m>5000</Y_m>
|
||||
</AREA>
|
||||
<NETWORK_TYPE>homogeneous</NETWORK_TYPE>
|
||||
<CELL_TYPE>macrocell</CELL_TYPE>
|
||||
<RELAY></RELAY>
|
||||
<MOBILITY>
|
||||
<UE_MOBILITY>
|
||||
<UE_INITIAL_DISTRIBUTION>random</UE_INITIAL_DISTRIBUTION>
|
||||
<RANDOM_UE_DISTRIBUTION>
|
||||
<NUMBER_OF_NODES>1</NUMBER_OF_NODES>
|
||||
</RANDOM_UE_DISTRIBUTION>
|
||||
<UE_MOBILITY_TYPE>STATIC</UE_MOBILITY_TYPE>
|
||||
<UE_MOVING_DYNAMICS>
|
||||
<MIN_SPEED_mps>1</MIN_SPEED_mps>
|
||||
<MAX_SPEED_mps>200</MAX_SPEED_mps>
|
||||
<MIN_SLEEP_ms>0.1</MIN_SLEEP_ms>
|
||||
<MAX_SLEEP_ms>5.0</MAX_SLEEP_ms>
|
||||
<MIN_JOURNEY_TIME_ms>0.1</MIN_JOURNEY_TIME_ms>
|
||||
<MAX_JOURNEY_TIME_ms>10</MAX_JOURNEY_TIME_ms>
|
||||
</UE_MOVING_DYNAMICS>
|
||||
<SUMO_CONFIG>
|
||||
<SUMO_CMD> sumo-gui </SUMO_CMD>
|
||||
<SUMO_CONFIG_FILE>$OPENAIR2_DIR/UTIL/OMG/SUMO/SCENARIOS/scen.sumo.cfg</SUMO_CONFIG_FILE>
|
||||
<SUMO_START> 0 </SUMO_START>
|
||||
<SUMO_END> 10 </SUMO_END>
|
||||
<SUMO_STEP> 10</SUMO_STEP>
|
||||
<SUMO_HOST_IP> 127.0.1.1</SUMO_HOST_IP>
|
||||
<SUMO_HOST_PORT> 8883</SUMO_HOST_PORT>
|
||||
</SUMO_CONFIG>
|
||||
</UE_MOBILITY>
|
||||
<eNB_MOBILITY>
|
||||
<eNB_INITIAL_DISTRIBUTION>random</eNB_INITIAL_DISTRIBUTION>
|
||||
<RANDOM_eNB_DISTRIBUTION>
|
||||
<NUMBER_OF_CELLS>1</NUMBER_OF_CELLS>
|
||||
</RANDOM_eNB_DISTRIBUTION>
|
||||
<eNB_MOBILITY_TYPE>STATIC</eNB_MOBILITY_TYPE>
|
||||
</eNB_MOBILITY>
|
||||
</MOBILITY>
|
||||
</TOPOLOGY_CONFIG>
|
||||
|
||||
<APPLICATION_CONFIG>
|
||||
<PREDEFINED_TRAFFIC>
|
||||
<SOURCE_ID>1</SOURCE_ID>
|
||||
<APPLICATION_TYPE>mcbr</APPLICATION_TYPE> <!-- OPTIONS: scbr,mcbr,bcbr, gaming_OA, gaming_TF, m2m_AP, m2m_BR, , random, ,full_buffer -->
|
||||
<DESTINATION_ID>0</DESTINATION_ID>
|
||||
</PREDEFINED_TRAFFIC>
|
||||
|
||||
<CUSTOMIZED_TRAFFIC>
|
||||
<SOURCE_ID>0</SOURCE_ID> <!-- <SOURCE_ID> 1:100 </SOURCE_ID> -->
|
||||
<TRANSPORT_PROTOCOL>udp</TRANSPORT_PROTOCOL> <!-- OPTIONS: tcp (default), udp -->
|
||||
<IP_VERSION>ipv6</IP_VERSION> <!-- OPTIONS: ipv4 (default), ipv6 -->
|
||||
<DESTINATION_ID>1</DESTINATION_ID>
|
||||
|
||||
<IDT_DIST>poisson</IDT_DIST> <!-- OPTIONS: no_transmission (default), uniform, poission, gaussian, exponential -->
|
||||
<IDT_MIN_ms>100</IDT_MIN_ms>
|
||||
<IDT_MAX_ms>1000</IDT_MAX_ms>
|
||||
<IDT_STANDARD_DEVIATION>4.5</IDT_STANDARD_DEVIATION>
|
||||
<IDT_LAMBDA>7.3</IDT_LAMBDA>
|
||||
<IDT_SCALE>30</IDT_SCALE>
|
||||
<IDT_SHAPE>15</IDT_SHAPE>
|
||||
|
||||
<SIZE_DIST>uniform</SIZE_DIST>
|
||||
<SIZE_MIN_byte>100</SIZE_MIN_byte>
|
||||
<SIZE_MAX_byte>500</SIZE_MAX_byte>
|
||||
<SIZE_STANDARD_DEVIATION>5.3</SIZE_STANDARD_DEVIATION>
|
||||
<SIZE_LAMBDA>2.2</SIZE_LAMBDA>
|
||||
<SIZE_SCALE>0.5</SIZE_SCALE>
|
||||
<SIZE_SHAPE>30</SIZE_SHAPE>
|
||||
|
||||
</CUSTOMIZED_TRAFFIC>
|
||||
|
||||
</APPLICATION_CONFIG>
|
||||
|
||||
<EMULATION_CONFIG>
|
||||
<EMULATION_TIME_ms>0</EMULATION_TIME_ms> <!--set to infinity-->
|
||||
|
||||
<PERFORMANCE_METRICS>
|
||||
<THROUGHPUT>1</THROUGHPUT>
|
||||
<LATENCY>1</LATENCY> <!-- include both OWD and RTT-->
|
||||
<LOSS_RATE>1</LOSS_RATE>
|
||||
</PERFORMANCE_METRICS>
|
||||
<LOG> <!-- set the global log level -->
|
||||
<LEVEL>warning</LEVEL>
|
||||
<INTERVAL>1</INTERVAL>
|
||||
</LOG>
|
||||
<SEED_VALUE>1234</SEED_VALUE> <!-- value 0 means randomly generated by OAI -->
|
||||
|
||||
</EMULATION_CONFIG>
|
||||
|
||||
<PROFILE>OCM_OMG_OTG_1</PROFILE>
|
||||
</OAI_EMULATION>
|
||||
@@ -0,0 +1,66 @@
|
||||
<OAI_EMULATION>
|
||||
<TOPOLOGY_CONFIG>
|
||||
<AREA>
|
||||
<X_m>500</X_m>
|
||||
<Y_m>500</Y_m>
|
||||
</AREA>
|
||||
<MOBILITY>
|
||||
<UE_MOBILITY>
|
||||
<RANDOM_UE_DISTRIBUTION>
|
||||
<NUMBER_OF_NODES>3</NUMBER_OF_NODES>
|
||||
</RANDOM_UE_DISTRIBUTION>
|
||||
<UE_MOBILITY_TYPE>STATIC</UE_MOBILITY_TYPE> <!-- STATIC -->
|
||||
</UE_MOBILITY>
|
||||
<eNB_MOBILITY>
|
||||
<eNB_INITIAL_DISTRIBUTION>random</eNB_INITIAL_DISTRIBUTION>
|
||||
<RANDOM_eNB_DISTRIBUTION>
|
||||
<NUMBER_OF_CELLS>1</NUMBER_OF_CELLS>
|
||||
</RANDOM_eNB_DISTRIBUTION>
|
||||
<eNB_MOBILITY_TYPE>STATIC</eNB_MOBILITY_TYPE>
|
||||
</eNB_MOBILITY>
|
||||
</MOBILITY>
|
||||
</TOPOLOGY_CONFIG>
|
||||
<APPLICATION_CONFIG>
|
||||
|
||||
|
||||
<!-- Basic configuration of a customized traffic : one state-->
|
||||
|
||||
|
||||
<CUSTOMIZED_TRAFFIC>
|
||||
<SOURCE_ID>0</SOURCE_ID>
|
||||
<TRANSPORT_PROTOCOL>tcp</TRANSPORT_PROTOCOL> <!-- OPTIONS: tcp (default), udp -->
|
||||
<IP_VERSION>ipv4</IP_VERSION> <!-- OPTIONS: ipv4 (default), ipv6 -->
|
||||
<DESTINATION_ID>1:3</DESTINATION_ID>
|
||||
<BACKGROUND_TRAFFIC>disable</BACKGROUND_TRAFFIC> <!-- options: enable, disable. If enable, it generates a background traffic corresponding to the traffic direction-->
|
||||
<AGGREGATION_LEVEL>1</AGGREGATION_LEVEL> <!-- options: default=1, the number of traffic to aggregate-->
|
||||
<IDT_DIST>uniform</IDT_DIST> <!-- available distributions: none (default), uniform, poission, gaussian, exponential,pareto, cauchy,fixed, weibull, gammav-->
|
||||
<IDT_MIN_ms>30</IDT_MIN_ms> <!--Minimum IDT values in milliseconds-->
|
||||
<IDT_MAX_ms>50</IDT_MAX_ms> <!--MAximum IDT values in milliseconds-->
|
||||
<SIZE_DIST>uniform</SIZE_DIST> <!-- available distributions: none (default), uniform, poission, gaussian, exponential,pareto, cauchy,fixed, weibull, gammav-->
|
||||
<SIZE_MIN_byte>512</SIZE_MIN_byte> <!--Minimum PAYLOAD size values in bytes-->
|
||||
<SIZE_MAX_byte>1024</SIZE_MAX_byte> <!--MAximum PAYLOAD size values in bytes-->
|
||||
</CUSTOMIZED_TRAFFIC>
|
||||
|
||||
|
||||
</APPLICATION_CONFIG>
|
||||
|
||||
<EMULATION_CONFIG>
|
||||
<EMULATION_TIME_ms>10000</EMULATION_TIME_ms> <!--if 0 set to infinity-->
|
||||
<CURVE>disable</CURVE> <!-- option: enabled, disabled. If CURVE is enabled, graphes are ploted in real time (UL and DL) of WOD and throughput measurement for each packet -->
|
||||
<BACKGROUND_STATS>enable</BACKGROUND_STATS> <!-- option: enable, disable. If enable, it allows to ptrint BACKGROUNS statistics: Nb packets, throughputs,etc-->
|
||||
<PERFORMANCE_METRICS>
|
||||
<THROUGHPUT>enable</THROUGHPUT> <!-- option: enable, disable. If enable, throughput measurements are plotted in real time-->
|
||||
<LATENCY>enable</LATENCY> <!-- option: enable, disable. If enable, latency measurements are plotted in real time-->
|
||||
<OWD_RADIO_ACCESS>enable</OWD_RADIO_ACCESS> <!-- option: enable, disable. If enable owd curve shows the one way radio access delay, else it shows end to end owd -->
|
||||
</PERFORMANCE_METRICS>
|
||||
<LOG> <!-- set the global log level -->
|
||||
<LEVEL>trace</LEVEL>
|
||||
<INTERVAL>1</INTERVAL>
|
||||
</LOG>
|
||||
<SEED_VALUE>1234</SEED_VALUE> <!-- value 0 means randomly generated by OAI -->
|
||||
|
||||
</EMULATION_CONFIG>
|
||||
|
||||
<PROFILE>OTG_2</PROFILE>
|
||||
</OAI_EMULATION>
|
||||
|
||||
@@ -0,0 +1,67 @@
|
||||
<OAI_EMULATION>
|
||||
<TOPOLOGY_CONFIG>
|
||||
<AREA>
|
||||
<X_m>500</X_m>
|
||||
<Y_m>500</Y_m>
|
||||
</AREA>
|
||||
<MOBILITY>
|
||||
<UE_MOBILITY>
|
||||
<RANDOM_UE_DISTRIBUTION>
|
||||
<NUMBER_OF_NODES>1</NUMBER_OF_NODES>
|
||||
</RANDOM_UE_DISTRIBUTION>
|
||||
<UE_MOBILITY_TYPE>STATIC</UE_MOBILITY_TYPE> <!-- STATIC -->
|
||||
</UE_MOBILITY>
|
||||
<eNB_MOBILITY>
|
||||
<eNB_INITIAL_DISTRIBUTION>random</eNB_INITIAL_DISTRIBUTION>
|
||||
<RANDOM_eNB_DISTRIBUTION>
|
||||
<NUMBER_OF_CELLS>1</NUMBER_OF_CELLS>
|
||||
</RANDOM_eNB_DISTRIBUTION>
|
||||
<eNB_MOBILITY_TYPE>STATIC</eNB_MOBILITY_TYPE>
|
||||
</eNB_MOBILITY>
|
||||
</MOBILITY>
|
||||
</TOPOLOGY_CONFIG>
|
||||
<APPLICATION_CONFIG>
|
||||
|
||||
|
||||
<!-- Basic configuration of a customized traffic : one state-->
|
||||
|
||||
|
||||
<CUSTOMIZED_TRAFFIC>
|
||||
<SOURCE_ID>0</SOURCE_ID>
|
||||
<TRANSPORT_PROTOCOL>tcp</TRANSPORT_PROTOCOL> <!-- OPTIONS: tcp (default), udp -->
|
||||
<IP_VERSION>ipv4</IP_VERSION> <!-- OPTIONS: ipv4 (default), ipv6 -->
|
||||
<DESTINATION_ID>1</DESTINATION_ID>
|
||||
<BACKGROUND_TRAFFIC>disable</BACKGROUND_TRAFFIC> <!-- options: enable, disable. If enable, it generates a background traffic corresponding to the traffic direction-->
|
||||
<AGGREGATION_LEVEL>1</AGGREGATION_LEVEL> <!-- options: default=1, the number of traffic to aggregate-->
|
||||
<IDT_DIST>uniform</IDT_DIST> <!-- available distributions: none (default), uniform, poission, gaussian, exponential,pareto, cauchy,fixed, weibull, gammav-->
|
||||
<IDT_MIN_ms>500</IDT_MIN_ms> <!--Minimum IDT values in milliseconds-->
|
||||
<IDT_MAX_ms>500</IDT_MAX_ms> <!--Minimum IDT values in milliseconds-->
|
||||
<SIZE_DIST>uniform</SIZE_DIST> <!-- available distributions: none (default), uniform, poission, gaussian, exponential,pareto, cauchy,fixed, weibull, gammav-->
|
||||
<SIZE_MIN_byte>1000</SIZE_MIN_byte> <!--Minimum PAYLOAD size values in bytes-->
|
||||
<SIZE_MAX_byte>1500</SIZE_MAX_byte> <!--MAximum PAYLOAD size values in bytes-->
|
||||
</CUSTOMIZED_TRAFFIC>
|
||||
|
||||
|
||||
|
||||
</APPLICATION_CONFIG>
|
||||
|
||||
<EMULATION_CONFIG>
|
||||
<EMULATION_TIME_ms>0</EMULATION_TIME_ms> <!--if 0 set to infinity-->
|
||||
<CURVE>enable</CURVE> <!-- option: enabled, disabled. If CURVE is enabled, graphes are ploted in real time (UL and DL) of WOD and throughput measurement for each packet -->
|
||||
<BACKGROUND_STATS>enable</BACKGROUND_STATS> <!-- option: enable, disable. If enable, it allows to ptrint BACKGROUNS statistics: Nb packets, throughputs,etc-->
|
||||
<PERFORMANCE_METRICS>
|
||||
<THROUGHPUT>enable</THROUGHPUT> <!-- option: enable, disable. If enable, throughput measurements are plotted in real time-->
|
||||
<LATENCY>enable</LATENCY> <!-- option: enable, disable. If enable, latency measurements are plotted in real time-->
|
||||
<OWD_RADIO_ACCESS>disable</OWD_RADIO_ACCESS> <!-- option: enable, disable. If enable owd curve shows the one way radio access delay, else it shows end to end owd -->
|
||||
</PERFORMANCE_METRICS>
|
||||
<LOG> <!-- set the global log level -->
|
||||
<LEVEL>trace</LEVEL>
|
||||
<INTERVAL>1</INTERVAL>
|
||||
</LOG>
|
||||
<SEED_VALUE>1234</SEED_VALUE> <!-- value 0 means randomly generated by OAI -->
|
||||
|
||||
</EMULATION_CONFIG>
|
||||
|
||||
<PROFILE>OTG_2</PROFILE>
|
||||
</OAI_EMULATION>
|
||||
|
||||
@@ -0,0 +1,84 @@
|
||||
<OAI_EMULATION>
|
||||
<TOPOLOGY_CONFIG>
|
||||
<AREA>
|
||||
<X_m>500</X_m>
|
||||
<Y_m>500</Y_m>
|
||||
</AREA>
|
||||
<MOBILITY>
|
||||
<UE_MOBILITY>
|
||||
<RANDOM_UE_DISTRIBUTION>
|
||||
<NUMBER_OF_NODES>1</NUMBER_OF_NODES>
|
||||
</RANDOM_UE_DISTRIBUTION>
|
||||
<UE_MOBILITY_TYPE>STATIC</UE_MOBILITY_TYPE> <!-- STATIC -->
|
||||
</UE_MOBILITY>
|
||||
<eNB_MOBILITY>
|
||||
<eNB_INITIAL_DISTRIBUTION>random</eNB_INITIAL_DISTRIBUTION>
|
||||
<RANDOM_eNB_DISTRIBUTION>
|
||||
<NUMBER_OF_CELLS>1</NUMBER_OF_CELLS>
|
||||
</RANDOM_eNB_DISTRIBUTION>
|
||||
<eNB_MOBILITY_TYPE>STATIC</eNB_MOBILITY_TYPE>
|
||||
</eNB_MOBILITY>
|
||||
</MOBILITY>
|
||||
</TOPOLOGY_CONFIG>
|
||||
<APPLICATION_CONFIG>
|
||||
|
||||
<CUSTOMIZED_TRAFFIC>
|
||||
<PROB_OFF_PE>0.6</PROB_OFF_PE> <!-- Probability threshold to move from OFF to PE state. -->
|
||||
<HOLDING_TIME_OFF_PE>10</HOLDING_TIME_OFF_PE> <!--Holding time in OFF state before moving to PE -->
|
||||
<HOLDING_TIME_PE_OFF>200</HOLDING_TIME_PE_OFF> <!--Holding time in PE state before moving to OFF -->
|
||||
<SOURCE_ID>1</SOURCE_ID>
|
||||
<TRANSPORT_PROTOCOL>tcp</TRANSPORT_PROTOCOL> <!-- OPTIONS: tcp (default), udp -->
|
||||
<IP_VERSION>ipv4</IP_VERSION> <!-- OPTIONS: ipv4 (default), ipv6 -->
|
||||
<DESTINATION_ID>0</DESTINATION_ID>
|
||||
<BACKGROUND_TRAFFIC>enable</BACKGROUND_TRAFFIC> <!-- options: enable, disable. If enable, it generates a background traffic corresponding to the traffic direction-->
|
||||
<AGGREGATION_LEVEL>1</AGGREGATION_LEVEL> <!-- options: default=1, the number of traffic to aggregate-->
|
||||
<IDT_DIST>uniform</IDT_DIST> <!-- available distributions: none (default), uniform, poission, gaussian, exponential,pareto, cauchy,fixed, weibull, gammav-->
|
||||
<IDT_MIN_ms>80</IDT_MIN_ms> <!--Minimum IDT values in milliseconds-->
|
||||
<IDT_MAX_ms>100</IDT_MAX_ms> <!--MAximum IDT values in milliseconds-->
|
||||
<SIZE_DIST>uniform</SIZE_DIST> <!-- available distributions: none (default), uniform, poission, gaussian, exponential,pareto, cauchy,fixed, weibull, gammav-->
|
||||
<SIZE_MIN_byte>100</SIZE_MIN_byte> <!--Minimum PAYLOAD size values in bytes-->
|
||||
<SIZE_MAX_byte>200</SIZE_MAX_byte> <!--MAximum PAYLOAD size values in bytes-->
|
||||
</CUSTOMIZED_TRAFFIC>
|
||||
|
||||
|
||||
|
||||
<CUSTOMIZED_TRAFFIC>
|
||||
<PROB_OFF_PE>0.6</PROB_OFF_PE> <!-- Probability threshold to move from OFF to PE state. -->
|
||||
<HOLDING_TIME_OFF_PE>10</HOLDING_TIME_OFF_PE> <!--Holding time in OFF state before moving to PE -->
|
||||
<HOLDING_TIME_PE_OFF>200</HOLDING_TIME_PE_OFF> <!--Holding time in PE state before moving to OFF -->
|
||||
<SOURCE_ID>0</SOURCE_ID>
|
||||
<TRANSPORT_PROTOCOL>tcp</TRANSPORT_PROTOCOL> <!-- OPTIONS: tcp (default), udp -->
|
||||
<IP_VERSION>ipv4</IP_VERSION> <!-- OPTIONS: ipv4 (default), ipv6 -->
|
||||
<DESTINATION_ID>1</DESTINATION_ID>
|
||||
<BACKGROUND_TRAFFIC>enable</BACKGROUND_TRAFFIC> <!-- options: enable, disable. If enable, it generates a background traffic corresponding to the traffic direction-->
|
||||
<AGGREGATION_LEVEL>1</AGGREGATION_LEVEL> <!-- options: default=1, the number of traffic to aggregate-->
|
||||
<IDT_DIST>uniform</IDT_DIST> <!-- available distributions: none (default), uniform, poission, gaussian, exponential,pareto, cauchy,fixed, weibull, gammav-->
|
||||
<IDT_MIN_ms>1000</IDT_MIN_ms> <!--Minimum IDT values in milliseconds-->
|
||||
<IDT_MAX_ms>2000</IDT_MAX_ms> <!--MAximum IDT values in milliseconds-->
|
||||
<SIZE_DIST>uniform</SIZE_DIST> <!-- available distributions: none (default), uniform, poission, gaussian, exponential,pareto, cauchy,fixed, weibull, gammav-->
|
||||
<SIZE_MIN_byte>100</SIZE_MIN_byte> <!--Minimum PAYLOAD size values in bytes-->
|
||||
<SIZE_MAX_byte>200</SIZE_MAX_byte> <!--MAximum PAYLOAD size values in bytes-->
|
||||
</CUSTOMIZED_TRAFFIC>
|
||||
|
||||
</APPLICATION_CONFIG>
|
||||
|
||||
<EMULATION_CONFIG>
|
||||
<EMULATION_TIME_ms>100000</EMULATION_TIME_ms> <!--if 0 set to infinity-->
|
||||
<CURVE>enable</CURVE> <!-- option: enabled, disabled. If CURVE is enabled, graphes are ploted in real time (UL and DL) of WOD and throughput measurement for each packet -->
|
||||
<BACKGROUND_STATS>enable</BACKGROUND_STATS> <!-- option: enable, disable. If enable, it allows to ptrint BACKGROUNS statistics: Nb packets, throughputs,etc-->
|
||||
<PERFORMANCE_METRICS>
|
||||
<THROUGHPUT>enable</THROUGHPUT> <!-- option: enable, disable. If enable, throughput measurements are plotted in real time-->
|
||||
<LATENCY>enable</LATENCY> <!-- option: enable, disable. If enable, latency measurements are plotted in real time-->
|
||||
<OWD_RADIO_ACCESS>enable</OWD_RADIO_ACCESS> <!-- option: enable, disable. If enable owd curve shows the one way radio access delay, else it shows end to end owd -->
|
||||
</PERFORMANCE_METRICS>
|
||||
<LOG> <!-- set the global log level -->
|
||||
<LEVEL>trace</LEVEL>
|
||||
<INTERVAL>1</INTERVAL>
|
||||
</LOG>
|
||||
<SEED_VALUE>1234</SEED_VALUE> <!-- value 0 means randomly generated by OAI -->
|
||||
|
||||
</EMULATION_CONFIG>
|
||||
|
||||
<PROFILE>OTG_2</PROFILE>
|
||||
</OAI_EMULATION>
|
||||
|
||||
@@ -0,0 +1,70 @@
|
||||
<OAI_EMULATION>
|
||||
<TOPOLOGY_CONFIG>
|
||||
<AREA>
|
||||
<X_m>500</X_m>
|
||||
<Y_m>500</Y_m>
|
||||
</AREA>
|
||||
<MOBILITY>
|
||||
<UE_MOBILITY>
|
||||
<RANDOM_UE_DISTRIBUTION>
|
||||
<NUMBER_OF_NODES>3</NUMBER_OF_NODES>
|
||||
</RANDOM_UE_DISTRIBUTION>
|
||||
<UE_MOBILITY_TYPE>STATIC</UE_MOBILITY_TYPE> <!-- STATIC -->
|
||||
</UE_MOBILITY>
|
||||
<eNB_MOBILITY>
|
||||
<eNB_INITIAL_DISTRIBUTION>random</eNB_INITIAL_DISTRIBUTION>
|
||||
<RANDOM_eNB_DISTRIBUTION>
|
||||
<NUMBER_OF_CELLS>1</NUMBER_OF_CELLS>
|
||||
</RANDOM_eNB_DISTRIBUTION>
|
||||
<eNB_MOBILITY_TYPE>STATIC</eNB_MOBILITY_TYPE>
|
||||
</eNB_MOBILITY>
|
||||
</MOBILITY>
|
||||
</TOPOLOGY_CONFIG>
|
||||
<APPLICATION_CONFIG>
|
||||
|
||||
|
||||
|
||||
<!-- High complexity configuration of a customized traffic with 2 states: OFF, PU and PE-->
|
||||
<!-- We configure OFF and PE holding time and off_pe, off_pu probabilities. They will be preconfigured automatically -->
|
||||
<CUSTOMIZED_TRAFFIC>
|
||||
<PU_SIZE_PKTS>70</PU_SIZE_PKTS> <!-- PU state packet size in bytes-->
|
||||
<PROB_OFF_PU>0.1</PROB_OFF_PU> <!-- Probability threshold to move from OFF to PU state. -->
|
||||
<PROB_OFF_PE>0.8</PROB_OFF_PE> <!-- Probability threshold to move from OFF to PE state. -->
|
||||
<HOLDING_TIME_OFF_PU>50</HOLDING_TIME_OFF_PU> <!--Holding time in OFF state before moving to PU -->
|
||||
<HOLDING_TIME_OFF_PE>13</HOLDING_TIME_OFF_PE> <!--Holding time in OFF state before moving to PE -->
|
||||
<HOLDING_TIME_PE_OFF>230</HOLDING_TIME_PE_OFF> <!--Holding time in PE state before moving to OFF -->
|
||||
<SOURCE_ID>1:3</SOURCE_ID>
|
||||
<TRANSPORT_PROTOCOL>udp</TRANSPORT_PROTOCOL> <!-- OPTIONS: tcp (default), udp -->
|
||||
<IP_VERSION>ipv6</IP_VERSION> <!-- OPTIONS: ipv4 (default), ipv6 -->
|
||||
<DESTINATION_ID>0</DESTINATION_ID>
|
||||
<BACKGROUND_TRAFFIC>enable</BACKGROUND_TRAFFIC> <!-- options: enable, disable. If enable, it generates a background traffic corresponding to the traffic direction-->
|
||||
<AGGREGATION_LEVEL>1</AGGREGATION_LEVEL> <!-- options: default=1, the number of traffic to aggregate-->
|
||||
<IDT_DIST>uniform</IDT_DIST> <!-- available distributions: none (default), uniform, poission, gaussian, exponential,pareto, cauchy,fixed, weibull, gammav-->
|
||||
<IDT_STANDARD_DEVIATION>4.5</IDT_STANDARD_DEVIATION> <!-- Standard deviation-->
|
||||
<SIZE_DIST>pareto</SIZE_DIST> <!-- available distributions: none (default), uniform, poission, gaussian, exponential,pareto, cauchy,fixed, weibull, gammav-->
|
||||
<SIZE_SCALE>0.5</SIZE_SCALE> <!-- Scale-->
|
||||
<SIZE_SHAPE>30</SIZE_SHAPE> <!-- Shape-->
|
||||
</CUSTOMIZED_TRAFFIC>
|
||||
|
||||
</APPLICATION_CONFIG>
|
||||
|
||||
<EMULATION_CONFIG>
|
||||
<EMULATION_TIME_ms>1000</EMULATION_TIME_ms> <!--if 0 set to infinity-->
|
||||
<CURVE>enable</CURVE> <!-- option: enabled, disabled. If CURVE is enabled, graphes are ploted in real time (UL and DL) of WOD and throughput measurement for each packet -->
|
||||
<BACKGROUND_STATS>enable</BACKGROUND_STATS> <!-- option: enable, disable. If enable, it allows to ptrint BACKGROUNS statistics: Nb packets, throughputs,etc-->
|
||||
<PERFORMANCE_METRICS>
|
||||
<THROUGHPUT>enable</THROUGHPUT> <!-- option: enable, disable. If enable, throughput measurements are plotted in real time-->
|
||||
<LATENCY>enable</LATENCY> <!-- option: enable, disable. If enable, latency measurements are plotted in real time-->
|
||||
<OWD_RADIO_ACCESS>enable</OWD_RADIO_ACCESS> <!-- option: enable, disable. If enable owd curve shows the one way radio access delay, else it shows end to end owd -->
|
||||
</PERFORMANCE_METRICS>
|
||||
<LOG> <!-- set the global log level -->
|
||||
<LEVEL>trace</LEVEL>
|
||||
<INTERVAL>1</INTERVAL>
|
||||
</LOG>
|
||||
<SEED_VALUE>1234</SEED_VALUE> <!-- value 0 means randomly generated by OAI -->
|
||||
|
||||
</EMULATION_CONFIG>
|
||||
|
||||
<PROFILE>OTG_2</PROFILE>
|
||||
</OAI_EMULATION>
|
||||
|
||||
@@ -0,0 +1,71 @@
|
||||
<OAI_EMULATION>
|
||||
<TOPOLOGY_CONFIG>
|
||||
<AREA>
|
||||
<X_m>500</X_m>
|
||||
<Y_m>500</Y_m>
|
||||
</AREA>
|
||||
<MOBILITY>
|
||||
<UE_MOBILITY>
|
||||
<RANDOM_UE_DISTRIBUTION>
|
||||
<NUMBER_OF_NODES>3</NUMBER_OF_NODES>
|
||||
</RANDOM_UE_DISTRIBUTION>
|
||||
<UE_MOBILITY_TYPE>STATIC</UE_MOBILITY_TYPE> <!-- STATIC -->
|
||||
</UE_MOBILITY>
|
||||
<eNB_MOBILITY>
|
||||
<eNB_INITIAL_DISTRIBUTION>random</eNB_INITIAL_DISTRIBUTION>
|
||||
<RANDOM_eNB_DISTRIBUTION>
|
||||
<NUMBER_OF_CELLS>1</NUMBER_OF_CELLS>
|
||||
</RANDOM_eNB_DISTRIBUTION>
|
||||
<eNB_MOBILITY_TYPE>STATIC</eNB_MOBILITY_TYPE>
|
||||
</eNB_MOBILITY>
|
||||
</MOBILITY>
|
||||
</TOPOLOGY_CONFIG>
|
||||
<APPLICATION_CONFIG>
|
||||
|
||||
|
||||
|
||||
<!-- High complexity configuration of a customized traffic with 2 states: OFF, ED and PE-->
|
||||
<!-- We configure OFF and PE holding time and off_pe, off_ED probabilities. They will be preconfigured automatically -->
|
||||
<CUSTOMIZED_TRAFFIC>
|
||||
<ED_SIZE_PKTS>70</ED_SIZE_PKTS>
|
||||
<PROB_OFF_ED>0.1</PROB_OFF_ED>
|
||||
<PROB_OFF_PE>0.2</PROB_OFF_PE> <!-- Probability threshold to move from OFF to PE state. -->
|
||||
<HOLDING_TIME_OFF_ED>100</HOLDING_TIME_OFF_ED> <!--Holding time in OFF state before moving to ED -->
|
||||
<HOLDING_TIME_OFF_PE>200</HOLDING_TIME_OFF_PE> <!--Holding time in OFF state before moving to PE -->
|
||||
<HOLDING_TIME_PE_OFF>230</HOLDING_TIME_PE_OFF> <!--Holding time in PE state before moving to OFF -->
|
||||
<SOURCE_ID>1:3</SOURCE_ID>
|
||||
<TRANSPORT_PROTOCOL>udp</TRANSPORT_PROTOCOL> <!-- OPTIONS: tcp (default), udp -->
|
||||
<IP_VERSION>ipv6</IP_VERSION> <!-- OPTIONS: ipv4 (default), ipv6 -->
|
||||
<DESTINATION_ID>0</DESTINATION_ID>
|
||||
<BACKGROUND_TRAFFIC>enable</BACKGROUND_TRAFFIC> <!-- options: enable, disable. If enable, it generates a background traffic corresponding to the traffic direction-->
|
||||
<AGGREGATION_LEVEL>1</AGGREGATION_LEVEL> <!-- options: default=1, the number of traffic to aggregate-->
|
||||
<IDT_DIST>uniform</IDT_DIST> <!-- available distributions: none (default), uniform, poission, gaussian, exponential,pareto, cauchy,fixed, weibull, gammav-->
|
||||
<IDT_MIN_ms>100</IDT_MIN_ms> <!--Minimum IDT values in milliseconds-->
|
||||
<IDT_MAX_ms>200</IDT_MAX_ms> <!--MAximum IDT values in milliseconds-->
|
||||
<SIZE_DIST>pareto</SIZE_DIST> <!-- available distributions: none (default), uniform, poission, gaussian, exponential,pareto, cauchy,fixed, weibull, gammav-->
|
||||
<SIZE_SCALE>0.5</SIZE_SCALE> <!-- Scale-->
|
||||
<SIZE_SHAPE>30</SIZE_SHAPE> <!-- Shape-->
|
||||
</CUSTOMIZED_TRAFFIC>
|
||||
|
||||
</APPLICATION_CONFIG>
|
||||
|
||||
<EMULATION_CONFIG>
|
||||
<EMULATION_TIME_ms>3000</EMULATION_TIME_ms> <!--if 0 set to infinity-->
|
||||
<CURVE>enable</CURVE> <!-- option: enabled, disabled. If CURVE is enabled, graphes are ploted in real time (UL and DL) of WOD and throughput measurement for each packet -->
|
||||
<BACKGROUND_STATS>enable</BACKGROUND_STATS> <!-- option: enable, disable. If enable, it allows to ptrint BACKGROUNS statistics: Nb packets, throughputs,etc-->
|
||||
<PERFORMANCE_METRICS>
|
||||
<THROUGHPUT>enable</THROUGHPUT> <!-- option: enable, disable. If enable, throughput measurements are plotted in real time-->
|
||||
<LATENCY>enable</LATENCY> <!-- option: enable, disable. If enable, latency measurements are plotted in real time-->
|
||||
<OWD_RADIO_ACCESS>enable</OWD_RADIO_ACCESS> <!-- option: enable, disable. If enable owd curve shows the one way radio access delay, else it shows end to end owd -->
|
||||
</PERFORMANCE_METRICS>
|
||||
<LOG> <!-- set the global log level -->
|
||||
<LEVEL>trace</LEVEL>
|
||||
<INTERVAL>1</INTERVAL>
|
||||
</LOG>
|
||||
<SEED_VALUE>1234</SEED_VALUE> <!-- value 0 means randomly generated by OAI -->
|
||||
|
||||
</EMULATION_CONFIG>
|
||||
|
||||
<PROFILE>OTG_2</PROFILE>
|
||||
</OAI_EMULATION>
|
||||
|
||||
@@ -0,0 +1,55 @@
|
||||
<OAI_EMULATION>
|
||||
<TOPOLOGY_CONFIG>
|
||||
<AREA>
|
||||
<X_m>500</X_m>
|
||||
<Y_m>500</Y_m>
|
||||
</AREA>
|
||||
<MOBILITY>
|
||||
<UE_MOBILITY>
|
||||
<RANDOM_UE_DISTRIBUTION>
|
||||
<NUMBER_OF_NODES>3</NUMBER_OF_NODES>
|
||||
</RANDOM_UE_DISTRIBUTION>
|
||||
<UE_MOBILITY_TYPE>STATIC</UE_MOBILITY_TYPE> <!-- STATIC -->
|
||||
</UE_MOBILITY>
|
||||
<eNB_MOBILITY>
|
||||
<eNB_INITIAL_DISTRIBUTION>random</eNB_INITIAL_DISTRIBUTION>
|
||||
<RANDOM_eNB_DISTRIBUTION>
|
||||
<NUMBER_OF_CELLS>1</NUMBER_OF_CELLS>
|
||||
</RANDOM_eNB_DISTRIBUTION>
|
||||
<eNB_MOBILITY_TYPE>STATIC</eNB_MOBILITY_TYPE>
|
||||
</eNB_MOBILITY>
|
||||
</MOBILITY>
|
||||
</TOPOLOGY_CONFIG>
|
||||
<APPLICATION_CONFIG>
|
||||
|
||||
<!-- Basic configuration of a preconfigured M2M traffic with 4 states: OFF, PU, ED and PE-->
|
||||
<PREDEFINED_TRAFFIC>
|
||||
<SOURCE_ID>0</SOURCE_ID>
|
||||
<APPLICATION_TYPE>m2m_traffic</APPLICATION_TYPE> <!-- options: scbr,mcbr,bcbr, gaming_OA, gaming_TF, m2m_AP, m2m_BR ,m2m_traffic -->
|
||||
<BACKGROUND_TRAFFIC>enable</BACKGROUND_TRAFFIC> <!-- options: enable, disable. If enable, it generates a background traffic corresponding to the traffic direction-->
|
||||
<AGGREGATION_LEVEL>1</AGGREGATION_LEVEL> <!-- options: default=1, the number of traffic to aggregate-->
|
||||
<DESTINATION_ID>1:3</DESTINATION_ID>
|
||||
</PREDEFINED_TRAFFIC>
|
||||
</APPLICATION_CONFIG>
|
||||
|
||||
|
||||
<EMULATION_CONFIG>
|
||||
<EMULATION_TIME_ms>5000</EMULATION_TIME_ms> <!--if 0 set to infinity-->
|
||||
<CURVE>enable</CURVE> <!-- option: enable, disable. If CURVE is enable, graphes are ploted in real time (UL and DL) of WOD and throughput measurement for each packet -->
|
||||
<BACKGROUND_STATS>enable</BACKGROUND_STATS> <!-- option: enable, disable. If enable, it allows to ptrint BACKGROUNS statistics: Nb packets, throughputs,etc-->
|
||||
<PERFORMANCE_METRICS>
|
||||
<THROUGHPUT>enable</THROUGHPUT> <!-- option: enable, disable. If enable, throughput measurements are plotted in real time-->
|
||||
<LATENCY>enable</LATENCY> <!-- option: enable, disable. If enable, latency measurements are plotted in real time-->
|
||||
<OWD_RADIO_ACESS>enable</OWD_RADIO_ACESS> <!-- option: enable, disable. If enable owd curve shows the one way radio access delay, else it shows end to end owd -->
|
||||
</PERFORMANCE_METRICS>
|
||||
<LOG> <!-- set the global log level -->
|
||||
<LEVEL>trace</LEVEL>
|
||||
<INTERVAL>1</INTERVAL>
|
||||
</LOG>
|
||||
<SEED_VALUE>1234</SEED_VALUE> <!-- value 0 means randomly generated by OAI -->
|
||||
|
||||
</EMULATION_CONFIG>
|
||||
|
||||
<PROFILE>OTG_2</PROFILE>
|
||||
</OAI_EMULATION>
|
||||
|
||||
@@ -0,0 +1,77 @@
|
||||
<OAI_EMULATION>
|
||||
<TOPOLOGY_CONFIG>
|
||||
<AREA>
|
||||
<X_m>500</X_m>
|
||||
<Y_m>500</Y_m>
|
||||
</AREA>
|
||||
<MOBILITY>
|
||||
<UE_MOBILITY>
|
||||
<RANDOM_UE_DISTRIBUTION>
|
||||
<NUMBER_OF_NODES>3</NUMBER_OF_NODES>
|
||||
</RANDOM_UE_DISTRIBUTION>
|
||||
<UE_MOBILITY_TYPE>STATIC</UE_MOBILITY_TYPE> <!-- STATIC -->
|
||||
</UE_MOBILITY>
|
||||
<eNB_MOBILITY>
|
||||
<eNB_INITIAL_DISTRIBUTION>random</eNB_INITIAL_DISTRIBUTION>
|
||||
<RANDOM_eNB_DISTRIBUTION>
|
||||
<NUMBER_OF_CELLS>1</NUMBER_OF_CELLS>
|
||||
</RANDOM_eNB_DISTRIBUTION>
|
||||
<eNB_MOBILITY_TYPE>STATIC</eNB_MOBILITY_TYPE>
|
||||
</eNB_MOBILITY>
|
||||
</MOBILITY>
|
||||
</TOPOLOGY_CONFIG>
|
||||
<APPLICATION_CONFIG>
|
||||
|
||||
|
||||
|
||||
<!-- High complexity configuration of a customized traffic with 3 states: OFF, ED, PU and PE-->
|
||||
<CUSTOMIZED_TRAFFIC>
|
||||
<SOURCE_ID>0</SOURCE_ID>
|
||||
<TRANSPORT_PROTOCOL>tcp</TRANSPORT_PROTOCOL>
|
||||
<IP_VERSION>ipv4</IP_VERSION>
|
||||
<DESTINATION_ID>1:3</DESTINATION_ID>
|
||||
<BACKGROUND_TRAFFIC>enable</BACKGROUND_TRAFFIC> <!-- options: enable, disable. If enable, it generates a background traffic corresponding to the traffic direction-->
|
||||
<AGGREGATION_LEVEL>1</AGGREGATION_LEVEL> <!-- options: default=1, the number of traffic to aggregate-->
|
||||
<IDT_DIST>uniform</IDT_DIST> <!-- available distributions: none (default), uniform, poission, gaussian, exponential,pareto, cauchy,fixed, weibull, gammav-->
|
||||
<IDT_MIN_ms>400</IDT_MIN_ms> <!--Minimum IDT values in milliseconds-->
|
||||
<IDT_MAX_ms>500</IDT_MAX_ms> <!--Maximum IDT values in milliseconds-->
|
||||
<SIZE_DIST>uniform</SIZE_DIST> <!-- available distributions: none (default), uniform, poission, gaussian, exponential,pareto, cauchy,fixed, weibull, gammav-->
|
||||
<SIZE_MIN_byte>80</SIZE_MIN_byte> <!--Minimum PAYLOAD size in bytes-->
|
||||
<SIZE_MAX_byte>150</SIZE_MAX_byte> <!--Maximum PAYLOAD size in bytes-->
|
||||
<PU_SIZE_PKTS>60</PU_SIZE_PKTS> <!-- PU state packet size in bytes-->
|
||||
<ED_SIZE_PKTS>70</ED_SIZE_PKTS> <!-- ED state packet size in bytes-->
|
||||
<PROB_OFF_PU>0.2</PROB_OFF_PU> <!-- Probability threshold to move from OFF to PU state. -->
|
||||
<PROB_OFF_ED>0.1</PROB_OFF_ED> <!-- Probability threshold to move from OFF to ED state. -->
|
||||
<PROB_OFF_PE>0.2</PROB_OFF_PE> <!-- Probability threshold to move from OFF to PE state. -->
|
||||
<PROB_PU_ED>0.1</PROB_PU_ED> <!-- Probability threshold to move from PU to ED state. -->
|
||||
<PROB_PU_PE>0.3</PROB_PU_PE> <!-- Probability threshold to move from PU to PE state. -->
|
||||
<PROB_ED_PE>0.1</PROB_ED_PE> <!-- Probability threshold to move from ED to PE state. -->
|
||||
<PROB_ED_PU>0.2</PROB_ED_PU> <!-- Probability threshold to move from ED to PU state. -->
|
||||
<HOLDING_TIME_OFF_ED>100</HOLDING_TIME_OFF_ED> <!--Holding time in OFF state before moving to ED -->
|
||||
<HOLDING_TIME_OFF_PU>120</HOLDING_TIME_OFF_PU> <!--Holding time in OFF state before moving to PU -->
|
||||
<HOLDING_TIME_OFF_PE>150</HOLDING_TIME_OFF_PE> <!--Holding time in OFF state before moving to PE -->
|
||||
<HOLDING_TIME_PE_OFF>500</HOLDING_TIME_PE_OFF> <!--Holding time in PE state before moving to OFF -->
|
||||
</CUSTOMIZED_TRAFFIC>
|
||||
|
||||
</APPLICATION_CONFIG>
|
||||
|
||||
<EMULATION_CONFIG>
|
||||
<EMULATION_TIME_ms>0</EMULATION_TIME_ms> <!--if0 set to infinity-->
|
||||
<CURVE>enable</CURVE> <!-- option: enabled, disabled. If CURVE is enabled, graphes are ploted in real time (UL and DL) of WOD and throughput measurement for each packet -->
|
||||
<BACKGROUND_STATS>enable</BACKGROUND_STATS>
|
||||
<PERFORMANCE_METRICS>
|
||||
<THROUGHPUT>enable</THROUGHPUT>
|
||||
<LATENCY>enable</LATENCY>
|
||||
<OWD_RADIO_ACCESS>enable</OWD_RADIO_ACCESS> <!-- option: 0, 1. If 1 owd curve shows the one way radio access delay,else shows end to end owd -->
|
||||
</PERFORMANCE_METRICS>
|
||||
<LOG> <!-- set the global log level -->
|
||||
<LEVEL>debug</LEVEL>
|
||||
<INTERVAL>1</INTERVAL>
|
||||
</LOG>
|
||||
<SEED_VALUE>1234</SEED_VALUE> <!-- value 0 means randomly generated by OAI -->
|
||||
|
||||
</EMULATION_CONFIG>
|
||||
|
||||
<PROFILE>OTG_2</PROFILE>
|
||||
</OAI_EMULATION>
|
||||
|
||||
@@ -0,0 +1,56 @@
|
||||
|
||||
<OAI_EMULATION>
|
||||
<ENVIRONMENT_SYSTEM_CONFIG>
|
||||
<FADING>
|
||||
<LARGE_SCALE>free_space</LARGE_SCALE>
|
||||
<FREE_SPACE_MODEL_PARAMETERS>
|
||||
<PATHLOSS_EXPONENT>2</PATHLOSS_EXPONENT>
|
||||
<PATHLOSS_0_dB>-50</PATHLOSS_0_dB>
|
||||
</FREE_SPACE_MODEL_PARAMETERS>
|
||||
</FADING>
|
||||
|
||||
<ANTENNA>
|
||||
<eNB_ANTENNA>
|
||||
<RX_NOISE_LEVEL_dB>-90</RX_NOISE_LEVEL_dB>
|
||||
</eNB_ANTENNA>
|
||||
|
||||
<UE_ANTENNA>
|
||||
<RX_NOISE_LEVEL_dB>-90</RX_NOISE_LEVEL_dB>
|
||||
</UE_ANTENNA>
|
||||
</ANTENNA>
|
||||
</ENVIRONMENT_SYSTEM_CONFIG>
|
||||
|
||||
<TOPOLOGY_CONFIG>
|
||||
<AREA>
|
||||
<X_m>1000</X_m>
|
||||
<Y_m>1000</Y_m>
|
||||
</AREA>
|
||||
|
||||
<MOBILITY>
|
||||
<UE_MOBILITY>
|
||||
<UE_INITIAL_DISTRIBUTION>random</UE_INITIAL_DISTRIBUTION>
|
||||
<RANDOM_UE_DISTRIBUTION>
|
||||
<NUMBER_OF_NODES>3</NUMBER_OF_NODES>
|
||||
</RANDOM_UE_DISTRIBUTION>
|
||||
<UE_MOBILITY_TYPE>RWP</UE_MOBILITY_TYPE>
|
||||
</UE_MOBILITY>
|
||||
|
||||
<eNB_MOBILITY>
|
||||
<eNB_INITIAL_DISTRIBUTION>random</eNB_INITIAL_DISTRIBUTION>
|
||||
<RANDOM_eNB_DISTRIBUTION>
|
||||
<NUMBER_OF_CELLS>1</NUMBER_OF_CELLS>
|
||||
</RANDOM_eNB_DISTRIBUTION>
|
||||
<eNB_MOBILITY_TYPE>STATIC</eNB_MOBILITY_TYPE>
|
||||
</eNB_MOBILITY>
|
||||
</MOBILITY>
|
||||
</TOPOLOGY_CONFIG>
|
||||
|
||||
<EMULATION_CONFIG>
|
||||
<EMULATION_TIME_ms>5000</EMULATION_TIME_ms>
|
||||
<LOG> <!-- set the global log level -->
|
||||
<LEVEL>debug</LEVEL>
|
||||
</LOG>
|
||||
</EMULATION_CONFIG>
|
||||
<PROFILE>OCM_OMG_1</PROFILE>
|
||||
</OAI_EMULATION>
|
||||
|
||||
@@ -0,0 +1,86 @@
|
||||
<OAI_EMULATION>
|
||||
<ENVIRONMENT_SYSTEM_CONFIG>
|
||||
<FADING>
|
||||
<FREE_SPACE_MODEL_PARAMETERS>
|
||||
<PATHLOSS_EXPONENT>2.0</PATHLOSS_EXPONENT>
|
||||
</FREE_SPACE_MODEL_PARAMETERS>
|
||||
<SMALL_SCALE>AWGN</SMALL_SCALE>
|
||||
</FADING>
|
||||
<UE_FREQUENCY_GHz>1.9</UE_FREQUENCY_GHz>
|
||||
</ENVIRONMENT_SYSTEM_CONFIG>
|
||||
|
||||
<TOPOLOGY_CONFIG>
|
||||
<AREA>
|
||||
<X_m>500</X_m>
|
||||
<Y_m>500</Y_m>
|
||||
</AREA>
|
||||
<MOBILITY>
|
||||
<UE_MOBILITY>
|
||||
<RANDOM_UE_DISTRIBUTION>
|
||||
<NUMBER_OF_NODES>4</NUMBER_OF_NODES>
|
||||
</RANDOM_UE_DISTRIBUTION>
|
||||
<UE_MOBILITY_TYPE>STATIC</UE_MOBILITY_TYPE> <!-- STATIC -->
|
||||
</UE_MOBILITY>
|
||||
<eNB_MOBILITY>
|
||||
<eNB_INITIAL_DISTRIBUTION>random</eNB_INITIAL_DISTRIBUTION>
|
||||
<RANDOM_eNB_DISTRIBUTION>
|
||||
<NUMBER_OF_CELLS>1</NUMBER_OF_CELLS>
|
||||
</RANDOM_eNB_DISTRIBUTION>
|
||||
<eNB_MOBILITY_TYPE>STATIC</eNB_MOBILITY_TYPE>
|
||||
</eNB_MOBILITY>
|
||||
</MOBILITY>
|
||||
</TOPOLOGY_CONFIG>
|
||||
|
||||
<APPLICATION_CONFIG>
|
||||
<!-- Basic configuration of a customized traffic : one state-->
|
||||
<CUSTOMIZED_TRAFFIC>
|
||||
<SOURCE_ID>0</SOURCE_ID>
|
||||
<TRANSPORT_PROTOCOL>udp</TRANSPORT_PROTOCOL> <!-- OPTIONS: tcp (default), udp -->
|
||||
<IP_VERSION>ipv6</IP_VERSION> <!-- OPTIONS: ipv4 (default), ipv6 -->
|
||||
<DESTINATION_ID>1:3</DESTINATION_ID>
|
||||
<BACKGROUND_TRAFFIC>disable</BACKGROUND_TRAFFIC> <!-- options: enable, disable. If enable, it generates a background traffic corresponding to the traffic direction-->
|
||||
<IDT_DIST>uniform</IDT_DIST> <!-- available distributions: none (default), uniform, poission, gaussian, exponential,pareto, cauchy,fixed, weibull, gammav-->
|
||||
<IDT_MIN_ms>40</IDT_MIN_ms> <!--Minimum IDT values in milliseconds-->
|
||||
<IDT_MAX_ms>50</IDT_MAX_ms> <!--Minimum IDT values in milliseconds-->
|
||||
<SIZE_DIST>fixed</SIZE_DIST> <!-- available distributions: none (default), uniform, poission, gaussian, exponential,pareto, cauchy,fixed, weibull, gammav-->
|
||||
<SIZE_MIN_byte>1400</SIZE_MIN_byte> <!--Minimum PAYLOAD size values in bytes-->
|
||||
<SIZE_MAX_byte>1400</SIZE_MAX_byte> <!--MAximum PAYLOAD size values in bytes-->
|
||||
</CUSTOMIZED_TRAFFIC>
|
||||
|
||||
<CUSTOMIZED_TRAFFIC>
|
||||
<SOURCE_ID>1:3</SOURCE_ID>
|
||||
<TRANSPORT_PROTOCOL>udp</TRANSPORT_PROTOCOL> <!-- OPTIONS: tcp (default), udp -->
|
||||
<IP_VERSION>ipv6</IP_VERSION> <!-- OPTIONS: ipv4 (default), ipv6 -->
|
||||
<DESTINATION_ID>0</DESTINATION_ID>
|
||||
<DURATION_ms>7000</DURATION_ms> <!-- indicates the start time of the app or the actual duration of the traffic-->
|
||||
<BACKGROUND_TRAFFIC>disable</BACKGROUND_TRAFFIC> <!-- options: enable, disable. If enable, it generates a background traffic corresponding to the traffic direction-->
|
||||
<IDT_DIST>fixed</IDT_DIST> <!-- available distributions: none (default), uniform, poission, gaussian, exponential,pareto, cauchy,fixed, weibull, gammav-->
|
||||
<IDT_MIN_ms>40</IDT_MIN_ms> <!--Minimum IDT values in milliseconds-->
|
||||
<IDT_MAX_ms>50</IDT_MAX_ms> <!--Minimum IDT values in milliseconds-->
|
||||
<SIZE_DIST>uniform</SIZE_DIST> <!-- available distributions: none (default), uniform, poission, gaussian, exponential,pareto, cauchy,fixed, weibull, gammav-->
|
||||
<SIZE_MIN_byte>256</SIZE_MIN_byte> <!--Minimum PAYLOAD size values in bytes-->
|
||||
<SIZE_MAX_byte>768</SIZE_MAX_byte> <!--Maximum PAYLOAD size values in bytes-->
|
||||
</CUSTOMIZED_TRAFFIC>
|
||||
|
||||
</APPLICATION_CONFIG>
|
||||
|
||||
<EMULATION_CONFIG>
|
||||
<EMULATION_TIME_ms>30000</EMULATION_TIME_ms> <!--if 0 set to infinity-->
|
||||
<CURVE>disable</CURVE> <!-- option: enabled, disabled. If CURVE is enabled, graphes are ploted in real time (UL and DL) of WOD and throughput measurement for each packet -->
|
||||
<PERFORMANCE_METRICS>
|
||||
<THROUGHPUT>enable</THROUGHPUT> <!-- option: enable, disable. If enable, throughput measurements are plotted in real time-->
|
||||
<LATENCY>enable</LATENCY> <!-- option: enable, disable. If enable, latency measurements are plotted in real time-->
|
||||
<OWD_RADIO_ACCESS>enable</OWD_RADIO_ACCESS> <!-- option: enable, disable. If enable owd curve shows the one way radio access delay, else it shows end to end owd -->
|
||||
</PERFORMANCE_METRICS>
|
||||
<LOG> <!-- set the global log level -->
|
||||
<LEVEL>info</LEVEL>
|
||||
<VERBOSITY>low</VERBOSITY>
|
||||
<INTERVAL>1</INTERVAL>
|
||||
</LOG>
|
||||
<SEED_VALUE>1234</SEED_VALUE> <!-- value 0 means randomly generated by OAI -->
|
||||
|
||||
</EMULATION_CONFIG>
|
||||
|
||||
<PROFILE>MEDIEVAL_OTG_1</PROFILE>
|
||||
</OAI_EMULATION>
|
||||
|
||||
@@ -0,0 +1,55 @@
|
||||
<OAI_EMULATION>
|
||||
<TOPOLOGY_CONFIG>
|
||||
<AREA>
|
||||
<X_m>500</X_m>
|
||||
<Y_m>500</Y_m>
|
||||
</AREA>
|
||||
<MOBILITY>
|
||||
<UE_MOBILITY>
|
||||
<RANDOM_UE_DISTRIBUTION>
|
||||
<NUMBER_OF_NODES>1</NUMBER_OF_NODES>
|
||||
</RANDOM_UE_DISTRIBUTION>
|
||||
<UE_MOBILITY_TYPE>STATIC</UE_MOBILITY_TYPE> <!-- STATIC -->
|
||||
</UE_MOBILITY>
|
||||
<eNB_MOBILITY>
|
||||
<eNB_INITIAL_DISTRIBUTION>random</eNB_INITIAL_DISTRIBUTION>
|
||||
<RANDOM_eNB_DISTRIBUTION>
|
||||
<NUMBER_OF_CELLS>1</NUMBER_OF_CELLS>
|
||||
</RANDOM_eNB_DISTRIBUTION>
|
||||
<eNB_MOBILITY_TYPE>STATIC</eNB_MOBILITY_TYPE>
|
||||
</eNB_MOBILITY>
|
||||
</MOBILITY>
|
||||
</TOPOLOGY_CONFIG>
|
||||
<APPLICATION_CONFIG>
|
||||
|
||||
<!-- Basic configuration of a preconfigured M2M traffic with 4 states: OFF, PU, ED and PE-->
|
||||
<PREDEFINED_TRAFFIC>
|
||||
<SOURCE_ID>1</SOURCE_ID>
|
||||
<APPLICATION_TYPE>alarm_temperature</APPLICATION_TYPE> <!-- options: scbr,mcbr,bcbr, auto_pilot_l (LOW speed), auto_pilot_m (MEDIEUM speed), auto_pilot_h (HIGH speed), auto_pilot_e (EMERGENCY), virtual_race_l (LOW speed), virtual_race_m (MEDIUM speed), virtual_race_h (HIGH speed), virtual_race_f (FINISH speed), alarm_humidity, alarm_smoke, alarm_temperature -->
|
||||
<BACKGROUND_TRAFFIC>disable</BACKGROUND_TRAFFIC> <!-- options: enable, disable. If enable, it generates a background traffic corresponding to the traffic direction-->
|
||||
<AGGREGATION_LEVEL>1</AGGREGATION_LEVEL> <!-- options: default=1, the number of traffic to aggregate-->
|
||||
<DESTINATION_ID>0</DESTINATION_ID>
|
||||
</PREDEFINED_TRAFFIC>
|
||||
</APPLICATION_CONFIG>
|
||||
|
||||
|
||||
<EMULATION_CONFIG>
|
||||
<EMULATION_TIME_ms>10000</EMULATION_TIME_ms> <!--if 0 set to infinity-->
|
||||
<CURVE>enable</CURVE> <!-- option: enable, disable. If CURVE is enable, graphes are ploted in real time (UL and DL) of WOD and throughput measurement for each packet -->
|
||||
<BACKGROUND_STATS>enable</BACKGROUND_STATS> <!-- option: enable, disable. If enable, it allows to ptrint BACKGROUNS statistics: Nb packets, throughputs,etc-->
|
||||
<PERFORMANCE_METRICS>
|
||||
<THROUGHPUT>enable</THROUGHPUT> <!-- option: enable, disable. If enable, throughput measurements are plotted in real time-->
|
||||
<LATENCY>enable</LATENCY> <!-- option: enable, disable. If enable, latency measurements are plotted in real time-->
|
||||
<OWD_RADIO_ACCESS>enable</OWD_RADIO_ACCESS> <!-- option: enable, disable. If enable owd curve shows the one way radio access delay, else it shows end to end owd -->
|
||||
</PERFORMANCE_METRICS>
|
||||
<LOG> <!-- set the global log level -->
|
||||
<LEVEL>trace</LEVEL>
|
||||
<INTERVAL>1</INTERVAL>
|
||||
</LOG>
|
||||
<SEED_VALUE>1234</SEED_VALUE> <!-- value 0 means randomly generated by OAI -->
|
||||
|
||||
</EMULATION_CONFIG>
|
||||
|
||||
<PROFILE>OTG_2</PROFILE>
|
||||
</OAI_EMULATION>
|
||||
|
||||
@@ -0,0 +1,85 @@
|
||||
<OAI_EMULATION>
|
||||
<ENVIRONMENT_SYSTEM_CONFIG>
|
||||
<FADING>
|
||||
<LARGE_SCALE>urban</LARGE_SCALE>
|
||||
<FREE_SPACE_MODEL_PARAMETERS>
|
||||
<PATHLOSS_EXPONENT>2</PATHLOSS_EXPONENT>
|
||||
<PATHLOSS_0_dB>-50</PATHLOSS_0_dB><!--pathloss at 1km -->
|
||||
</FREE_SPACE_MODEL_PARAMETERS>
|
||||
<SMALL_SCALE>AWGN</SMALL_SCALE>
|
||||
</FADING>
|
||||
<WALL_PENETRATION_LOSS_dB>5</WALL_PENETRATION_LOSS_dB>
|
||||
<SYSTEM_BANDWIDTH_MB>7.68</SYSTEM_BANDWIDTH_MB>
|
||||
<UE_FREQUENCY_GHz>1.9</UE_FREQUENCY_GHz>
|
||||
<ANTENNA>
|
||||
<eNB_ANTENNA>
|
||||
<RX_NOISE_LEVEL_dB>5</RX_NOISE_LEVEL_dB>
|
||||
<NUMBER_OF_SECTORS>1</NUMBER_OF_SECTORS>
|
||||
<BEAM_WIDTH_dB>1.13</BEAM_WIDTH_dB>
|
||||
<ANTENNA_GAIN_dBi>16</ANTENNA_GAIN_dBi>
|
||||
<TX_POWER_dBm>40</TX_POWER_dBm>
|
||||
</eNB_ANTENNA>
|
||||
<UE_ANTENNA>
|
||||
<RX_NOISE_LEVEL_dB>1</RX_NOISE_LEVEL_dB>
|
||||
<ANTENNA_GAIN_dBi>5</ANTENNA_GAIN_dBi>
|
||||
<TX_POWER_dBm>20</TX_POWER_dBm>
|
||||
</UE_ANTENNA>
|
||||
</ANTENNA>
|
||||
</ENVIRONMENT_SYSTEM_CONFIG>
|
||||
|
||||
<TOPOLOGY_CONFIG>
|
||||
<AREA>
|
||||
<X_m>500</X_m>
|
||||
<Y_m>500</Y_m>
|
||||
</AREA>
|
||||
<MOBILITY>
|
||||
<UE_MOBILITY>
|
||||
<RANDOM_UE_DISTRIBUTION>
|
||||
<NUMBER_OF_NODES>10</NUMBER_OF_NODES>
|
||||
</RANDOM_UE_DISTRIBUTION>
|
||||
<UE_MOBILITY_TYPE>STATIC</UE_MOBILITY_TYPE>
|
||||
</UE_MOBILITY>
|
||||
<eNB_MOBILITY>
|
||||
<eNB_INITIAL_DISTRIBUTION>random</eNB_INITIAL_DISTRIBUTION>
|
||||
<RANDOM_eNB_DISTRIBUTION>
|
||||
<NUMBER_OF_CELLS>1</NUMBER_OF_CELLS>
|
||||
</RANDOM_eNB_DISTRIBUTION>
|
||||
<eNB_MOBILITY_TYPE>STATIC</eNB_MOBILITY_TYPE>
|
||||
</eNB_MOBILITY>
|
||||
</MOBILITY>
|
||||
</TOPOLOGY_CONFIG>
|
||||
|
||||
<APPLICATION_CONFIG>
|
||||
<!-- DL -->
|
||||
<PREDEFINED_TRAFFIC>
|
||||
<SOURCE_ID>0</SOURCE_ID> <!-- valid formats are "n:m" and "n,m" and "n" -->
|
||||
<DURATION_ms>5000</DURATION_ms> <!-- start at -->
|
||||
<APPLICATION_TYPE>scbr</APPLICATION_TYPE>
|
||||
<DESTINATION_ID>1:9</DESTINATION_ID> <!-- valid formats are "n:m" and "n,m" and "n" -->
|
||||
</PREDEFINED_TRAFFIC>
|
||||
<!-- UL -->
|
||||
<PREDEFINED_TRAFFIC>
|
||||
<SOURCE_ID>1:9</SOURCE_ID> <!-- valid formats are "n:m" and "n,m" and "n" -->
|
||||
<DURATION_ms>5000</DURATION_ms> <!-- start at -->
|
||||
<APPLICATION_TYPE>scbr</APPLICATION_TYPE>
|
||||
<DESTINATION_ID>0</DESTINATION_ID> <!-- valid formats are "n:m" and "n,m" and "n" -->
|
||||
</PREDEFINED_TRAFFIC>
|
||||
</APPLICATION_CONFIG>
|
||||
|
||||
<EMULATION_CONFIG>
|
||||
<EMULATION_TIME_ms>10000</EMULATION_TIME_ms> <!--set to infinity-->
|
||||
<PERFORMANCE_METRICS>
|
||||
<THROUGHPUT>1</THROUGHPUT>
|
||||
<LATENCY>1</LATENCY>
|
||||
</PERFORMANCE_METRICS>
|
||||
<LOG> <!-- set the global log level -->
|
||||
<LEVEL>debug</LEVEL>
|
||||
<VERBOSITY>low</VERBOSITY>
|
||||
</LOG>
|
||||
<SEED_VALUE>0</SEED_VALUE> <!-- value 0 means randomly generated by OAI -->
|
||||
|
||||
</EMULATION_CONFIG>
|
||||
|
||||
<PROFILE>CBA_1</PROFILE>
|
||||
|
||||
</OAI_EMULATION>
|
||||
@@ -0,0 +1,63 @@
|
||||
<!-- how to configure: talk about the convention, range -->
|
||||
<OAI_EMULATION>
|
||||
<ENVIRONMENT_SYSTEM_CONFIG>
|
||||
|
||||
<FADING>
|
||||
<LARGE_SCALE>free_space</LARGE_SCALE>
|
||||
<FREE_SPACE_MODEL_PARAMETERS>
|
||||
<PATHLOSS_EXPONENT>2</PATHLOSS_EXPONENT>
|
||||
<PATHLOSS_0_dB>-50</PATHLOSS_0_dB>
|
||||
</FREE_SPACE_MODEL_PARAMETERS>
|
||||
<SMALL_SCALE>Rice1</SMALL_SCALE>
|
||||
</FADING>
|
||||
|
||||
<WALL_PENETRATION_LOSS_dB>5</WALL_PENETRATION_LOSS_dB>
|
||||
<SYSTEM_BANDWIDTH_MB>7.68</SYSTEM_BANDWIDTH_MB>
|
||||
<UE_FREQUENCY_GHz>1.9</UE_FREQUENCY_GHz>
|
||||
|
||||
<ANTENNA>
|
||||
<eNB_ANTENNA>
|
||||
<RX_NOISE_LEVEL>-90</RX_NOISE_LEVEL>
|
||||
</eNB_ANTENNA>
|
||||
<UE_ANTENNA>
|
||||
<RX_NOISE_LEVEL>-90</RX_NOISE_LEVEL>
|
||||
</UE_ANTENNA>
|
||||
</ANTENNA>
|
||||
</ENVIRONMENT_SYSTEM_CONFIG>
|
||||
|
||||
<TOPOLOGY_CONFIG>
|
||||
<AREA>
|
||||
<X_m>500</X_m>
|
||||
<Y_m>500</Y_m>
|
||||
</AREA>
|
||||
<MOBILITY>
|
||||
<UE_MOBILITY>
|
||||
<UE_INITIAL_DISTRIBUTION>random</UE_INITIAL_DISTRIBUTION> <!-- options, range -->
|
||||
<RANDOM_UE_DISTRIBUTION>
|
||||
<NUMBER_OF_NODES>1</NUMBER_OF_NODES>
|
||||
</RANDOM_UE_DISTRIBUTION>
|
||||
<UE_MOBILITY_TYPE>STATIC</UE_MOBILITY_TYPE>
|
||||
</UE_MOBILITY>
|
||||
|
||||
<eNB_MOBILITY>
|
||||
<eNB_INITIAL_DISTRIBUTION>random</eNB_INITIAL_DISTRIBUTION>
|
||||
<RANDOM_eNB_DISTRIBUTION>
|
||||
<NUMBER_OF_CELLS>1</NUMBER_OF_CELLS>
|
||||
</RANDOM_eNB_DISTRIBUTION>
|
||||
|
||||
<eNB_MOBILITY_TYPE>STATIC</eNB_MOBILITY_TYPE>
|
||||
</eNB_MOBILITY>
|
||||
</MOBILITY>
|
||||
</TOPOLOGY_CONFIG>
|
||||
|
||||
<EMULATION_CONFIG>
|
||||
<EMULATION_TIME_ms>5000</EMULATION_TIME_ms>
|
||||
<LOG> <!-- set the global log level -->
|
||||
<LEVEL>debug</LEVEL>
|
||||
</LOG>
|
||||
</EMULATION_CONFIG>
|
||||
|
||||
<PROFILE>OCM_OMG_2</PROFILE>
|
||||
|
||||
</OAI_EMULATION>
|
||||
|
||||
@@ -0,0 +1,93 @@
|
||||
<OAI_EMULATION>
|
||||
<TOPOLOGY_CONFIG>
|
||||
<AREA>
|
||||
<X_m>500</X_m>
|
||||
<Y_m>500</Y_m>
|
||||
</AREA>
|
||||
<MOBILITY>
|
||||
<UE_MOBILITY>
|
||||
<RANDOM_UE_DISTRIBUTION>
|
||||
<NUMBER_OF_NODES>1</NUMBER_OF_NODES>
|
||||
</RANDOM_UE_DISTRIBUTION>
|
||||
<UE_MOBILITY_TYPE>STATIC</UE_MOBILITY_TYPE> <!-- STATIC -->
|
||||
</UE_MOBILITY>
|
||||
<eNB_MOBILITY>
|
||||
<eNB_INITIAL_DISTRIBUTION>random</eNB_INITIAL_DISTRIBUTION>
|
||||
<RANDOM_eNB_DISTRIBUTION>
|
||||
<NUMBER_OF_CELLS>1</NUMBER_OF_CELLS>
|
||||
</RANDOM_eNB_DISTRIBUTION>
|
||||
<eNB_MOBILITY_TYPE>STATIC</eNB_MOBILITY_TYPE>
|
||||
</eNB_MOBILITY>
|
||||
</MOBILITY>
|
||||
</TOPOLOGY_CONFIG>
|
||||
<APPLICATION_CONFIG>
|
||||
<!-- M2M: MANGO AGGREGATED TRAFFIC -->
|
||||
<!-- M2M: NEWSTEO AGGREGATED TRAFFIC-->
|
||||
<!-- VOIP TRAFFICS: G729 + G711-->
|
||||
<!-- 1st VOIP TRAFFICS: G729 bidirectional -->
|
||||
<PREDEFINED_TRAFFIC>
|
||||
<SOURCE_ID>0</SOURCE_ID>
|
||||
<APPLICATION_TYPE>voip_g729</APPLICATION_TYPE>
|
||||
<DESTINATION_ID>1</DESTINATION_ID>
|
||||
</PREDEFINED_TRAFFIC>
|
||||
<PREDEFINED_TRAFFIC>
|
||||
<SOURCE_ID>1</SOURCE_ID>
|
||||
<APPLICATION_TYPE>voip_g729</APPLICATION_TYPE>
|
||||
<DESTINATION_ID>0</DESTINATION_ID>
|
||||
</PREDEFINED_TRAFFIC>
|
||||
<!-- 2nd VOIP TRAFFICS: G711 bidirectional-->
|
||||
<PREDEFINED_TRAFFIC>
|
||||
<SOURCE_ID>0</SOURCE_ID>
|
||||
<APPLICATION_TYPE>voip_g711</APPLICATION_TYPE>
|
||||
<DESTINATION_ID>1</DESTINATION_ID>
|
||||
</PREDEFINED_TRAFFIC>
|
||||
<PREDEFINED_TRAFFIC>
|
||||
<SOURCE_ID>1</SOURCE_ID>
|
||||
<APPLICATION_TYPE>voip_g711</APPLICATION_TYPE>
|
||||
<DESTINATION_ID>0</DESTINATION_ID>
|
||||
</PREDEFINED_TRAFFIC>
|
||||
<!-- 1st M2M: MANGO AGGREGATED TRAFFIC bidirectional-->
|
||||
<PREDEFINED_TRAFFIC>
|
||||
<SOURCE_ID>1</SOURCE_ID>
|
||||
<APPLICATION_TYPE>iqsim_mango</APPLICATION_TYPE>
|
||||
<DESTINATION_ID>0</DESTINATION_ID>
|
||||
<BACKGROUND_TRAFFIC>disable</BACKGROUND_TRAFFIC>
|
||||
</PREDEFINED_TRAFFIC>
|
||||
<PREDEFINED_TRAFFIC>
|
||||
<SOURCE_ID>0</SOURCE_ID>
|
||||
<APPLICATION_TYPE>iqsim_mango</APPLICATION_TYPE>
|
||||
<DESTINATION_ID>1</DESTINATION_ID>
|
||||
</PREDEFINED_TRAFFIC>
|
||||
<!-- 2nd M2M: NEWSTEO AGGREGATED TRAFFIC bidirectional-->
|
||||
<PREDEFINED_TRAFFIC>
|
||||
<SOURCE_ID>1</SOURCE_ID>
|
||||
<APPLICATION_TYPE>iqsim_newsteo</APPLICATION_TYPE>
|
||||
<DESTINATION_ID>0</DESTINATION_ID>
|
||||
</PREDEFINED_TRAFFIC>
|
||||
<PREDEFINED_TRAFFIC>
|
||||
<SOURCE_ID>0</SOURCE_ID>
|
||||
<APPLICATION_TYPE>iqsim_newsteo</APPLICATION_TYPE>
|
||||
<DESTINATION_ID>1</DESTINATION_ID>
|
||||
</PREDEFINED_TRAFFIC>
|
||||
</APPLICATION_CONFIG>
|
||||
|
||||
<EMULATION_CONFIG>
|
||||
<EMULATION_TIME_ms>10000</EMULATION_TIME_ms> <!--if 0 set to infinity-->
|
||||
<CURVE>enable</CURVE> <!-- option: enabled, disabled. If CURVE is enabled, graphes are ploted in real time (UL and DL) of WOD and throughput measurement for each packet -->
|
||||
<BACKGROUND_STATS>enable</BACKGROUND_STATS> <!-- option: enable, disable. If enable, it allows to ptrint BACKGROUND statistics: Nb packets, throughputs,etc-->
|
||||
<PERFORMANCE_METRICS>
|
||||
<THROUGHPUT>enable</THROUGHPUT> <!-- option: enable, disable. If enable, throughput measurements are plotted in real time-->
|
||||
<LATENCY>enable</LATENCY> <!-- option: enable, disable. If enable, latency measurements are plotted in real time-->
|
||||
<OWD_RADIO_ACCESS>disable</OWD_RADIO_ACCESS> <!-- option: enable, disable. If enable owd curve shows the one way radio access delay, else it shows end to end owd -->
|
||||
</PERFORMANCE_METRICS>
|
||||
<LOG> <!-- set the global log level -->
|
||||
<LEVEL>info</LEVEL>
|
||||
<INTERVAL>1</INTERVAL>
|
||||
</LOG>
|
||||
<SEED_VALUE>1234</SEED_VALUE> <!-- value 0 means randomly generated by OAI -->
|
||||
|
||||
</EMULATION_CONFIG>
|
||||
|
||||
<PROFILE>OTG_2</PROFILE>
|
||||
</OAI_EMULATION>
|
||||
|
||||
@@ -0,0 +1,41 @@
|
||||
|
||||
<OAI_EMULATION>
|
||||
<TOPOLOGY_CONFIG>
|
||||
<AREA>
|
||||
<X_m>100</X_m>
|
||||
<Y_m>100</Y_m>
|
||||
</AREA>
|
||||
<MOBILITY>
|
||||
<UE_MOBILITY>
|
||||
<UE_INITIAL_DISTRIBUTION>random</UE_INITIAL_DISTRIBUTION>
|
||||
<RANDOM_UE_DISTRIBUTION>
|
||||
<NUMBER_OF_NODES>1</NUMBER_OF_NODES>
|
||||
</RANDOM_UE_DISTRIBUTION>
|
||||
<UE_MOBILITY_TYPE>RWP</UE_MOBILITY_TYPE>
|
||||
<UE_MOVING_DYNAMICS>
|
||||
<MIN_SPEED_mps>0.01</MIN_SPEED_mps>
|
||||
<MAX_SPEED_mps>10</MAX_SPEED_mps>
|
||||
<MIN_PAUSE_TIME_ms>0.01</MIN_PAUSE_TIME_ms>
|
||||
<MAX_PAUSE_TIME_ms>10</MAX_PAUSE_TIME_ms>
|
||||
<MIN_JOURNEY_TIME_ms>0.01</MIN_JOURNEY_TIME_ms>
|
||||
<MAX_JOURNEY_TIME_ms>10</MAX_JOURNEY_TIME_ms>
|
||||
</UE_MOVING_DYNAMICS>
|
||||
</UE_MOBILITY>
|
||||
|
||||
<eNB_MOBILITY>
|
||||
<eNB_INITIAL_DISTRIBUTION>random</eNB_INITIAL_DISTRIBUTION>
|
||||
<RANDOM_eNB_DISTRIBUTION>
|
||||
<NUMBER_OF_CELLS>1</NUMBER_OF_CELLS>
|
||||
</RANDOM_eNB_DISTRIBUTION>
|
||||
<eNB_MOBILITY_TYPE>STATIC</eNB_MOBILITY_TYPE>
|
||||
</eNB_MOBILITY>
|
||||
</MOBILITY>
|
||||
<OMV>1</OMV>
|
||||
</TOPOLOGY_CONFIG>
|
||||
|
||||
<EMULATION_CONFIG>
|
||||
<EMULATION_TIME_ms>1000</EMULATION_TIME_ms>
|
||||
</EMULATION_CONFIG>
|
||||
|
||||
<PROFILE>OMG_OMV</PROFILE>
|
||||
</OAI_EMULATION>
|
||||
@@ -0,0 +1,84 @@
|
||||
<OAI_EMULATION>
|
||||
<ENVIRONMENT_SYSTEM_CONFIG>
|
||||
<FADING>
|
||||
<LARGE_SCALE>urban</LARGE_SCALE>
|
||||
<FREE_SPACE_MODEL_PARAMETERS>
|
||||
<PATHLOSS_EXPONENT>3.67</PATHLOSS_EXPONENT>
|
||||
<PATHLOSS_0_dB>-128</PATHLOSS_0_dB><!--pathloss at 1km -->
|
||||
</FREE_SPACE_MODEL_PARAMETERS>
|
||||
<SMALL_SCALE>Rayleigh8</SMALL_SCALE>
|
||||
</FADING>
|
||||
<SYSTEM_BANDWIDTH_MB>7.68</SYSTEM_BANDWIDTH_MB>
|
||||
<SYSTEM_FREQUENCY_GHz>1.9</SYSTEM_FREQUENCY_GHz>
|
||||
<TRANSMISSION_MODE>2</TRANSMISSION_MODE> <!-- validavalue: 1, 2, 5, 6 -->
|
||||
<ANTENNA>
|
||||
<eNB_ANTENNA>
|
||||
<RX_NOISE_LEVEL_dB>0</RX_NOISE_LEVEL_dB>
|
||||
<NUMBER_OF_SECTORS>1</NUMBER_OF_SECTORS><!--this means we use an omnidirectional antenna and the following parameter is ignored-->
|
||||
<BEAM_WIDTH_dB>0</BEAM_WIDTH_dB><!--3dB beam width per sector-->
|
||||
<ANTENNA_GAIN_dBi>0</ANTENNA_GAIN_dBi>
|
||||
<TX_POWER_dBm>43</TX_POWER_dBm>
|
||||
</eNB_ANTENNA>
|
||||
<UE_ANTENNA>
|
||||
<RX_NOISE_LEVEL_dB>0</RX_NOISE_LEVEL_dB>
|
||||
<ANTENNA_GAIN_dBi>0</ANTENNA_GAIN_dBi>
|
||||
<TX_POWER_dBm>20</TX_POWER_dBm>
|
||||
</UE_ANTENNA>
|
||||
</ANTENNA>
|
||||
</ENVIRONMENT_SYSTEM_CONFIG>
|
||||
|
||||
<TOPOLOGY_CONFIG>
|
||||
<AREA>
|
||||
<X_m>5000</X_m>
|
||||
<Y_m>5000</Y_m>
|
||||
</AREA>
|
||||
<MOBILITY>
|
||||
<UE_MOBILITY>
|
||||
<UE_INITIAL_DISTRIBUTION>random</UE_INITIAL_DISTRIBUTION>
|
||||
<RANDOM_UE_DISTRIBUTION>
|
||||
<NUMBER_OF_NODES>1</NUMBER_OF_NODES>
|
||||
</RANDOM_UE_DISTRIBUTION>
|
||||
<UE_MOBILITY_TYPE>TRACE</UE_MOBILITY_TYPE>
|
||||
<TRACE_MOBILITY_FILE>static_2ues.tr</TRACE_MOBILITY_FILE> <!-- file should be located at $(OPENAIR2)/UTIL/OMG/TRACE/, see README there-->
|
||||
</UE_MOBILITY>
|
||||
<eNB_MOBILITY>
|
||||
<eNB_INITIAL_DISTRIBUTION>random</eNB_INITIAL_DISTRIBUTION>
|
||||
<RANDOM_eNB_DISTRIBUTION>
|
||||
<NUMBER_OF_CELLS>1</NUMBER_OF_CELLS>
|
||||
</RANDOM_eNB_DISTRIBUTION>
|
||||
<eNB_MOBILITY_TYPE>STATIC</eNB_MOBILITY_TYPE>
|
||||
<!-- <TRACE_MOBILITY_FILE>static_1enb.tr</TRACE_MOBILITY_FILE> --> <!-- file should be located at $(OPENAIR2)/UTIL/OMG/TRACE/, see README there-->
|
||||
</eNB_MOBILITY>
|
||||
</MOBILITY>
|
||||
</TOPOLOGY_CONFIG>
|
||||
|
||||
<APPLICATION_CONFIG>
|
||||
<!--DL-->
|
||||
<CUSTOMIZED_TRAFFIC>
|
||||
<SOURCE_ID>0</SOURCE_ID>
|
||||
<DESTINATION_ID>1</DESTINATION_ID>
|
||||
<IDT_DIST>fixed</IDT_DIST> <!-- option: no_customized_traffic, uniform, gaussian, exponential, poisson, fixed, weibull, pareto, gamma, cauchy, log_normal -->
|
||||
<IDT_MIN_ms>10</IDT_MIN_ms>
|
||||
<SIZE_DIST>fixed</SIZE_DIST> <!-- option: no_customized_traffic, uniform, gaussian, exponential, poisson, fixed, weibull, pareto, gamma, cauchy, log_normal -->
|
||||
<SIZE_MIN_byte>1000</SIZE_MIN_byte>
|
||||
</CUSTOMIZED_TRAFFIC>
|
||||
|
||||
</APPLICATION_CONFIG>
|
||||
|
||||
<EMULATION_CONFIG>
|
||||
<EMULATION_TIME_ms>10000</EMULATION_TIME_ms>
|
||||
<CURVE>disable</CURVE>
|
||||
<PERFORMANCE_METRICS>
|
||||
<THROUGHPUT>1</THROUGHPUT>
|
||||
</PERFORMANCE_METRICS>
|
||||
<LOG> <!-- set the global log level -->
|
||||
<LEVEL>info</LEVEL>
|
||||
<VERBOSITY>high</VERBOSITY> <!-- low, medium, high, full -->
|
||||
<INTERVAL>1</INTERVAL>
|
||||
</LOG>
|
||||
<SEED_VALUE>7111</SEED_VALUE> <!-- value 0 means randomly generated by OAI -->
|
||||
|
||||
</EMULATION_CONFIG>
|
||||
|
||||
<PROFILE>OCM_OMG_OTG_REF_1</PROFILE>
|
||||
</OAI_EMULATION>
|
||||
@@ -0,0 +1,92 @@
|
||||
<OAI_EMULATION>
|
||||
<ENVIRONMENT_SYSTEM_CONFIG>
|
||||
<FADING>
|
||||
<LARGE_SCALE>urban</LARGE_SCALE>
|
||||
<FREE_SPACE_MODEL_PARAMETERS>
|
||||
<PATHLOSS_EXPONENT>3.67</PATHLOSS_EXPONENT>
|
||||
<PATHLOSS_0_dB>-128</PATHLOSS_0_dB><!--pathloss at 1km -->
|
||||
</FREE_SPACE_MODEL_PARAMETERS>
|
||||
<SMALL_SCALE>AWGN</SMALL_SCALE>
|
||||
</FADING>
|
||||
<SYSTEM_BANDWIDTH_MB>7.68</SYSTEM_BANDWIDTH_MB>
|
||||
<SYSTEM_FREQUENCY_GHz>1.9</SYSTEM_FREQUENCY_GHz>
|
||||
<TRANSMISSION_MODE>1</TRANSMISSION_MODE> <!-- validavalue: 1, 2, 5, 6 -->
|
||||
<ANTENNA>
|
||||
<eNB_ANTENNA>
|
||||
<RX_NOISE_LEVEL_dB>0</RX_NOISE_LEVEL_dB>
|
||||
<NUMBER_OF_SECTORS>1</NUMBER_OF_SECTORS><!--this means we use an omnidirectional antenna and the following parameter is ignored-->
|
||||
<BEAM_WIDTH_dB>0</BEAM_WIDTH_dB><!--3dB beam width per sector-->
|
||||
<ANTENNA_GAIN_dBi>0</ANTENNA_GAIN_dBi>
|
||||
<TX_POWER_dBm>43</TX_POWER_dBm>
|
||||
</eNB_ANTENNA>
|
||||
<UE_ANTENNA>
|
||||
<RX_NOISE_LEVEL_dB>0</RX_NOISE_LEVEL_dB>
|
||||
<ANTENNA_GAIN_dBi>0</ANTENNA_GAIN_dBi>
|
||||
<TX_POWER_dBm>20</TX_POWER_dBm>
|
||||
</UE_ANTENNA>
|
||||
</ANTENNA>
|
||||
</ENVIRONMENT_SYSTEM_CONFIG>
|
||||
|
||||
<TOPOLOGY_CONFIG>
|
||||
<AREA>
|
||||
<X_m>5000</X_m>
|
||||
<Y_m>5000</Y_m>
|
||||
</AREA>
|
||||
<MOBILITY>
|
||||
<UE_MOBILITY>
|
||||
<UE_INITIAL_DISTRIBUTION>random</UE_INITIAL_DISTRIBUTION>
|
||||
<RANDOM_UE_DISTRIBUTION>
|
||||
<NUMBER_OF_NODES>1</NUMBER_OF_NODES>
|
||||
</RANDOM_UE_DISTRIBUTION>
|
||||
<UE_MOBILITY_TYPE>TRACE</UE_MOBILITY_TYPE>
|
||||
<TRACE_MOBILITY_FILE>static_2ues.tr</TRACE_MOBILITY_FILE> <!-- file should be located at $(OPENAIR2)/UTIL/OMG/TRACE/, see README there-->
|
||||
</UE_MOBILITY>
|
||||
<eNB_MOBILITY>
|
||||
<eNB_INITIAL_DISTRIBUTION>random</eNB_INITIAL_DISTRIBUTION>
|
||||
<RANDOM_eNB_DISTRIBUTION>
|
||||
<NUMBER_OF_CELLS>1</NUMBER_OF_CELLS>
|
||||
</RANDOM_eNB_DISTRIBUTION>
|
||||
<eNB_MOBILITY_TYPE>STATIC</eNB_MOBILITY_TYPE>
|
||||
</eNB_MOBILITY>
|
||||
</MOBILITY>
|
||||
</TOPOLOGY_CONFIG>
|
||||
|
||||
<APPLICATION_CONFIG>
|
||||
<!--DL-->
|
||||
<CUSTOMIZED_TRAFFIC>
|
||||
<SOURCE_ID>0</SOURCE_ID>
|
||||
<DESTINATION_ID>1</DESTINATION_ID>
|
||||
<IDT_DIST>fixed</IDT_DIST> <!-- option: no_customized_traffic, uniform, gaussian, exponential, poisson, fixed, weibull, pareto, gamma, cauchy, log_normal -->
|
||||
<IDT_MIN_ms>10</IDT_MIN_ms>
|
||||
<SIZE_DIST>fixed</SIZE_DIST> <!-- option: no_customized_traffic, uniform, gaussian, exponential, poisson, fixed, weibull, pareto, gamma, cauchy, log_normal -->
|
||||
<SIZE_MIN_byte>1500</SIZE_MIN_byte>
|
||||
</CUSTOMIZED_TRAFFIC>
|
||||
|
||||
<!--UL-->
|
||||
<CUSTOMIZED_TRAFFIC>
|
||||
<SOURCE_ID>1</SOURCE_ID>
|
||||
<DESTINATION_ID>0</DESTINATION_ID>
|
||||
<IDT_DIST>fixed</IDT_DIST> <!-- option: no_customized_traffic, uniform, gaussian, exponential, poisson, fixed, weibull, pareto, gamma, cauchy, log_normal -->
|
||||
<IDT_MIN_ms>10</IDT_MIN_ms>
|
||||
<SIZE_DIST>fixed</SIZE_DIST> <!-- option: no_customized_traffic, uniform, gaussian, exponential, poisson, fixed, weibull, pareto, gamma, cauchy, log_normal -->
|
||||
<SIZE_MIN_byte>1000</SIZE_MIN_byte>
|
||||
</CUSTOMIZED_TRAFFIC>
|
||||
</APPLICATION_CONFIG>
|
||||
|
||||
<EMULATION_CONFIG>
|
||||
<EMULATION_TIME_ms>10000</EMULATION_TIME_ms>
|
||||
|
||||
<PERFORMANCE_METRICS>
|
||||
<THROUGHPUT>1</THROUGHPUT>
|
||||
</PERFORMANCE_METRICS>
|
||||
<LOG> <!-- set the global log level -->
|
||||
<LEVEL>info</LEVEL>
|
||||
<VERBOSITY>medium</VERBOSITY> <!-- low, medium, high, full -->
|
||||
<INTERVAL>1</INTERVAL>
|
||||
</LOG>
|
||||
<SEED_VALUE>7111</SEED_VALUE> <!-- value 0 means randomly generated by OAI -->
|
||||
|
||||
</EMULATION_CONFIG>
|
||||
|
||||
<PROFILE>OCM_OMG_OTG_REF_1</PROFILE>
|
||||
</OAI_EMULATION>
|
||||
@@ -0,0 +1,68 @@
|
||||
<OAI_EMULATION>
|
||||
<ENVIRONMENT_SYSTEM_CONFIG>
|
||||
<FADING>
|
||||
<LARGE_SCALE>urban</LARGE_SCALE>
|
||||
<FREE_SPACE_MODEL_PARAMETERS>
|
||||
<PATHLOSS_EXPONENT>3.67</PATHLOSS_EXPONENT>
|
||||
<PATHLOSS_0_dB>-128</PATHLOSS_0_dB><!--pathloss at 1km -->
|
||||
</FREE_SPACE_MODEL_PARAMETERS>
|
||||
<SMALL_SCALE>AWGN</SMALL_SCALE>
|
||||
</FADING>
|
||||
<SYSTEM_BANDWIDTH_MB>7.68</SYSTEM_BANDWIDTH_MB>
|
||||
<SYSTEM_FREQUENCY_GHz>1.9</SYSTEM_FREQUENCY_GHz>
|
||||
<TRANSMISSION_MODE>1</TRANSMISSION_MODE> <!-- validavalue: 1, 2, 5, 6 -->
|
||||
<ANTENNA>
|
||||
<eNB_ANTENNA>
|
||||
<RX_NOISE_LEVEL_dB>0</RX_NOISE_LEVEL_dB>
|
||||
<NUMBER_OF_SECTORS>1</NUMBER_OF_SECTORS><!--this means we use an omnidirectional antenna and the following parameter is ignored-->
|
||||
<BEAM_WIDTH_dB>0</BEAM_WIDTH_dB><!--3dB beam width per sector-->
|
||||
<ANTENNA_GAIN_dBi>0</ANTENNA_GAIN_dBi>
|
||||
<TX_POWER_dBm>15</TX_POWER_dBm><!--this is currently ignored and set in asn1_msg.c-->
|
||||
</eNB_ANTENNA>
|
||||
<UE_ANTENNA>
|
||||
<RX_NOISE_LEVEL_dB>0</RX_NOISE_LEVEL_dB>
|
||||
<ANTENNA_GAIN_dBi>0</ANTENNA_GAIN_dBi>
|
||||
<TX_POWER_dBm>0</TX_POWER_dBm><!--this is ignored since UE TX power is controlled by eNB-->
|
||||
</UE_ANTENNA>
|
||||
</ANTENNA>
|
||||
</ENVIRONMENT_SYSTEM_CONFIG>
|
||||
|
||||
<TOPOLOGY_CONFIG>
|
||||
<AREA>
|
||||
<X_m>5000</X_m>
|
||||
<Y_m>5000</Y_m>
|
||||
</AREA>
|
||||
<MOBILITY>
|
||||
<UE_MOBILITY>
|
||||
<UE_INITIAL_DISTRIBUTION>random</UE_INITIAL_DISTRIBUTION>
|
||||
<RANDOM_UE_DISTRIBUTION>
|
||||
<NUMBER_OF_NODES>1</NUMBER_OF_NODES>
|
||||
</RANDOM_UE_DISTRIBUTION>
|
||||
<UE_MOBILITY_TYPE>TRACE</UE_MOBILITY_TYPE>
|
||||
<TRACE_MOBILITY_FILE>handover.tr</TRACE_MOBILITY_FILE> <!-- file should be located at $(OPENAIR2)/UTIL/OMG/TRACE/, see README there-->
|
||||
</UE_MOBILITY>
|
||||
<eNB_MOBILITY>
|
||||
<eNB_INITIAL_DISTRIBUTION>random</eNB_INITIAL_DISTRIBUTION>
|
||||
<RANDOM_eNB_DISTRIBUTION>
|
||||
<NUMBER_OF_CELLS>3</NUMBER_OF_CELLS>
|
||||
</RANDOM_eNB_DISTRIBUTION>
|
||||
<eNB_MOBILITY_TYPE>TRACE</eNB_MOBILITY_TYPE>
|
||||
<TRACE_MOBILITY_FILE>hexagonal_eNBs.tr</TRACE_MOBILITY_FILE> <!-- file should be located at $(OPENAIR2)/UTIL/OMG/TRACE/, see README there-->
|
||||
</eNB_MOBILITY>
|
||||
</MOBILITY>
|
||||
</TOPOLOGY_CONFIG>
|
||||
|
||||
<EMULATION_CONFIG>
|
||||
<EMULATION_TIME_ms>3000</EMULATION_TIME_ms>
|
||||
|
||||
<LOG> <!-- set the global log level -->
|
||||
<LEVEL>debug</LEVEL>
|
||||
<VERBOSITY>medium</VERBOSITY> <!-- low, medium, high, full -->
|
||||
<INTERVAL>1</INTERVAL>
|
||||
</LOG>
|
||||
<SEED_VALUE>1234</SEED_VALUE> <!-- value 0 means randomly generated by OAI -->
|
||||
|
||||
</EMULATION_CONFIG>
|
||||
|
||||
<PROFILE>HO_1</PROFILE>
|
||||
</OAI_EMULATION>
|
||||
@@ -0,0 +1,92 @@
|
||||
<OAI_EMULATION>
|
||||
<ENVIRONMENT_SYSTEM_CONFIG>
|
||||
<FADING>
|
||||
<LARGE_SCALE>urban</LARGE_SCALE>
|
||||
<FREE_SPACE_MODEL_PARAMETERS>
|
||||
<PATHLOSS_EXPONENT>3.67</PATHLOSS_EXPONENT>
|
||||
<PATHLOSS_0_dB>-128</PATHLOSS_0_dB><!--pathloss at 1km -->
|
||||
</FREE_SPACE_MODEL_PARAMETERS>
|
||||
<SMALL_SCALE>AWGN</SMALL_SCALE>
|
||||
</FADING>
|
||||
<WALL_PENETRATION_LOSS_dB>5</WALL_PENETRATION_LOSS_dB>
|
||||
<SYSTEM_BANDWIDTH_MB>7.68</SYSTEM_BANDWIDTH_MB>
|
||||
<UE_FREQUENCY_GHz>1.9</UE_FREQUENCY_GHz>
|
||||
<ANTENNA>
|
||||
<eNB_ANTENNA>
|
||||
<RX_NOISE_LEVEL_dB>5</RX_NOISE_LEVEL_dB>
|
||||
<NUMBER_OF_SECTORS>1</NUMBER_OF_SECTORS>
|
||||
<BEAM_WIDTH_dB>1.13</BEAM_WIDTH_dB>
|
||||
<ANTENNA_GAIN_dBi>16</ANTENNA_GAIN_dBi>
|
||||
<TX_POWER_dBm>40</TX_POWER_dBm>
|
||||
</eNB_ANTENNA>
|
||||
<UE_ANTENNA>
|
||||
<RX_NOISE_LEVEL_dB>1</RX_NOISE_LEVEL_dB>
|
||||
<ANTENNA_GAIN_dBi>5</ANTENNA_GAIN_dBi>
|
||||
<TX_POWER_dBm>20</TX_POWER_dBm>
|
||||
</UE_ANTENNA>
|
||||
</ANTENNA>
|
||||
</ENVIRONMENT_SYSTEM_CONFIG>
|
||||
|
||||
<TOPOLOGY_CONFIG>
|
||||
<AREA>
|
||||
<X_m>500</X_m>
|
||||
<Y_m>500</Y_m>
|
||||
</AREA>
|
||||
<MOBILITY>
|
||||
<UE_MOBILITY>
|
||||
<UE_INITIAL_DISTRIBUTION>random</UE_INITIAL_DISTRIBUTION>
|
||||
<RANDOM_UE_DISTRIBUTION>
|
||||
<NUMBER_OF_NODES>2</NUMBER_OF_NODES>
|
||||
</RANDOM_UE_DISTRIBUTION>
|
||||
<UE_MOBILITY_TYPE>STATIC</UE_MOBILITY_TYPE>
|
||||
<UE_MOVING_DYNAMICS>
|
||||
<MIN_SPEED_mps>1</MIN_SPEED_mps>
|
||||
<MAX_SPEED_mps>200</MAX_SPEED_mps>
|
||||
<MIN_SLEEP_ms>0.1</MIN_SLEEP_ms>
|
||||
<MAX_SLEEP_ms>5.0</MAX_SLEEP_ms>
|
||||
<MIN_JOURNEY_TIME_ms>0.1</MIN_JOURNEY_TIME_ms>
|
||||
<MAX_JOURNEY_TIME_ms>10</MAX_JOURNEY_TIME_ms>
|
||||
</UE_MOVING_DYNAMICS>
|
||||
</UE_MOBILITY>
|
||||
<eNB_MOBILITY>
|
||||
<eNB_INITIAL_DISTRIBUTION>random</eNB_INITIAL_DISTRIBUTION>
|
||||
<RANDOM_eNB_DISTRIBUTION>
|
||||
<NUMBER_OF_CELLS>1</NUMBER_OF_CELLS>
|
||||
</RANDOM_eNB_DISTRIBUTION>
|
||||
|
||||
<eNB_MOBILITY_TYPE>STATIC</eNB_MOBILITY_TYPE>
|
||||
</eNB_MOBILITY>
|
||||
</MOBILITY>
|
||||
</TOPOLOGY_CONFIG>
|
||||
|
||||
<APPLICATION_CONFIG>
|
||||
<PREDEFINED_TRAFFIC>
|
||||
<SOURCE_ID>0</SOURCE_ID> <!-- valid formats are: -->
|
||||
<APPLICATION_TYPE>scbr</APPLICATION_TYPE> <!-- OPTIONS: scbr,mcbr,bcbr, gaming_OA, gaming_TF, m2m_AP, m2m_BR, , random, ,full_buffer -->
|
||||
<DESTINATION_ID>1:2</DESTINATION_ID> <!-- valid formats are: -->
|
||||
</PREDEFINED_TRAFFIC>
|
||||
<PREDEFINED_TRAFFIC>
|
||||
<SOURCE_ID>1:2</SOURCE_ID> <!-- valid formats are: -->
|
||||
<APPLICATION_TYPE>scbr</APPLICATION_TYPE> <!-- OPTIONS: scbr,mcbr,bcbr, gaming_OA, gaming_TF, m2m_AP, m2m_BR, , random, ,full_buffer -->
|
||||
<DESTINATION_ID>0</DESTINATION_ID> <!-- valid formats are: -->
|
||||
</PREDEFINED_TRAFFIC>
|
||||
|
||||
</APPLICATION_CONFIG>
|
||||
|
||||
<EMULATION_CONFIG>
|
||||
<EMULATION_TIME_ms>10000</EMULATION_TIME_ms> <!--set to infinity-->
|
||||
|
||||
<PERFORMANCE_METRICS>
|
||||
<THROUGHPUT>1</THROUGHPUT>
|
||||
</PERFORMANCE_METRICS>
|
||||
<LOG> <!-- set the global log level -->
|
||||
<LEVEL>debug</LEVEL>
|
||||
<VERBOSITY>medium</VERBOSITY> <!-- low, medium, high, full -->
|
||||
<INTERVAL>1</INTERVAL>
|
||||
</LOG>
|
||||
<SEED_VALUE>0</SEED_VALUE> <!-- value 0 means randomly generated by OAI -->
|
||||
|
||||
</EMULATION_CONFIG>
|
||||
|
||||
<PROFILE>OCM_OMG</PROFILE>
|
||||
</OAI_EMULATION>
|
||||
@@ -0,0 +1,43 @@
|
||||
<!-- template for OAI CLI interface. To connect from local host: telnet 127.0.1.1 1352 from the remot: telnet ip@ 1352-->
|
||||
<OAI_EMULATION>
|
||||
<TOPOLOGY_CONFIG>
|
||||
<AREA>
|
||||
<X_m>5000</X_m>
|
||||
<Y_m>5000</Y_m>
|
||||
</AREA>
|
||||
<MOBILITY>
|
||||
<UE_MOBILITY>
|
||||
<RANDOM_UE_DISTRIBUTION>
|
||||
<NUMBER_OF_NODES>1</NUMBER_OF_NODES>
|
||||
</RANDOM_UE_DISTRIBUTION>
|
||||
<UE_MOBILITY_TYPE>STATIC</UE_MOBILITY_TYPE>
|
||||
</UE_MOBILITY>
|
||||
<eNB_MOBILITY>
|
||||
<eNB_INITIAL_DISTRIBUTION>random</eNB_INITIAL_DISTRIBUTION>
|
||||
<RANDOM_eNB_DISTRIBUTION>
|
||||
<NUMBER_OF_CELLS>1</NUMBER_OF_CELLS>
|
||||
</RANDOM_eNB_DISTRIBUTION>
|
||||
<eNB_MOBILITY_TYPE>STATIC</eNB_MOBILITY_TYPE>
|
||||
</eNB_MOBILITY>
|
||||
</MOBILITY>
|
||||
</TOPOLOGY_CONFIG>
|
||||
|
||||
<EMULATION_CONFIG>
|
||||
<EMULATION_TIME_ms>0</EMULATION_TIME_ms> <!--set to infinity-->
|
||||
<LOG> <!-- set the global log level -->
|
||||
<LEVEL>debug</LEVEL>
|
||||
<VERBOSITY>high</VERBOSITY>
|
||||
<INTERVAL>10</INTERVAL>
|
||||
</LOG>
|
||||
<SEED_VALUE>1234</SEED_VALUE> <!-- value 0 means randomly generated by OAI -->
|
||||
|
||||
<CLI> <!-- start the cli server, a simple TCP server -->
|
||||
<START_ENB>1</START_ENB>
|
||||
<START_UE>0</START_UE>
|
||||
</CLI>
|
||||
</EMULATION_CONFIG>
|
||||
|
||||
<PROFILE>CLI</PROFILE>
|
||||
|
||||
</OAI_EMULATION>
|
||||
|
||||
@@ -0,0 +1,56 @@
|
||||
<!-- test OMG with sumo -->
|
||||
<OAI_EMULATION>
|
||||
<TOPOLOGY_CONFIG>
|
||||
<AREA>
|
||||
<X_m>700</X_m>
|
||||
<Y_m>700</Y_m>
|
||||
</AREA>
|
||||
<MOBILITY>
|
||||
<UE_MOBILITY>
|
||||
<UE_INITIAL_DISTRIBUTION>random</UE_INITIAL_DISTRIBUTION>
|
||||
<RANDOM_UE_DISTRIBUTION>
|
||||
<NUMBER_OF_NODES>8</NUMBER_OF_NODES>
|
||||
</RANDOM_UE_DISTRIBUTION>
|
||||
<UE_MOBILITY_TYPE>SUMO</UE_MOBILITY_TYPE>
|
||||
<UE_MOVING_DYNAMICS>
|
||||
<MIN_SPEED_mps>1</MIN_SPEED_mps>
|
||||
<MAX_SPEED_mps>20</MAX_SPEED_mps>
|
||||
<MIN_SLEEP_ms>0.1</MIN_SLEEP_ms>
|
||||
<MAX_SLEEP_ms>5.0</MAX_SLEEP_ms>
|
||||
<MIN_JOURNEY_TIME_ms>0.1</MIN_JOURNEY_TIME_ms>
|
||||
<MAX_JOURNEY_TIME_ms>10</MAX_JOURNEY_TIME_ms>
|
||||
</UE_MOVING_DYNAMICS>
|
||||
<SUMO_CONFIG>
|
||||
<SUMO_CMD>sumo-gui</SUMO_CMD>
|
||||
<SUMO_CONFIG_FILE>$OPENAIR2_DIR/UTIL/OMG/SUMO/SCENARIOS/traci.scen.sumo.cfg</SUMO_CONFIG_FILE>
|
||||
<SUMO_START>0</SUMO_START>
|
||||
<SUMO_END>10000</SUMO_END>
|
||||
<SUMO_STEP>1</SUMO_STEP>
|
||||
<SUMO_HOST_IP>127.0.1.1</SUMO_HOST_IP>
|
||||
<SUMO_HOST_PORT>8890</SUMO_HOST_PORT>
|
||||
</SUMO_CONFIG>
|
||||
</UE_MOBILITY>
|
||||
<eNB_MOBILITY>
|
||||
<eNB_INITIAL_DISTRIBUTION>random</eNB_INITIAL_DISTRIBUTION>
|
||||
<RANDOM_eNB_DISTRIBUTION>
|
||||
<NUMBER_OF_CELLS>1</NUMBER_OF_CELLS>
|
||||
</RANDOM_eNB_DISTRIBUTION>
|
||||
|
||||
<eNB_MOBILITY_TYPE>STATIC</eNB_MOBILITY_TYPE>
|
||||
</eNB_MOBILITY>
|
||||
</MOBILITY>
|
||||
<!-- <OMV>1</OMV> -->
|
||||
</TOPOLOGY_CONFIG>
|
||||
|
||||
<EMULATION_CONFIG>
|
||||
<EMULATION_TIME_ms>10000</EMULATION_TIME_ms> <!--set to infinity-->
|
||||
<LOG> <!-- set the global log level -->
|
||||
<LEVEL>info</LEVEL>
|
||||
<INTERVAL>1</INTERVAL>
|
||||
</LOG>
|
||||
<SEED_VALUE>974930</SEED_VALUE> <!-- value 0 means randomly generated by OAI -->
|
||||
|
||||
</EMULATION_CONFIG>
|
||||
|
||||
<PROFILE>OMG_SUMO</PROFILE>
|
||||
</OAI_EMULATION>
|
||||
@@ -0,0 +1,52 @@
|
||||
<OAI_EMULATION>
|
||||
<TOPOLOGY_CONFIG>
|
||||
<AREA>
|
||||
<X_m>5000</X_m>
|
||||
<Y_m>5000</Y_m>
|
||||
</AREA>
|
||||
<MOBILITY>
|
||||
<UE_MOBILITY>
|
||||
<RANDOM_UE_DISTRIBUTION>
|
||||
<NUMBER_OF_NODES>4</NUMBER_OF_NODES>
|
||||
</RANDOM_UE_DISTRIBUTION>
|
||||
<UE_MOBILITY_TYPE>STATIC</UE_MOBILITY_TYPE>
|
||||
</UE_MOBILITY>
|
||||
<eNB_MOBILITY>
|
||||
<eNB_INITIAL_DISTRIBUTION>random</eNB_INITIAL_DISTRIBUTION>
|
||||
<RANDOM_eNB_DISTRIBUTION>
|
||||
<NUMBER_OF_CELLS>1</NUMBER_OF_CELLS>
|
||||
</RANDOM_eNB_DISTRIBUTION>
|
||||
<eNB_MOBILITY_TYPE>STATIC</eNB_MOBILITY_TYPE>
|
||||
</eNB_MOBILITY>
|
||||
</MOBILITY>
|
||||
</TOPOLOGY_CONFIG>
|
||||
|
||||
<APPLICATION_CONFIG>
|
||||
<PREDEFINED_TRAFFIC>
|
||||
<SOURCE_ID>0</SOURCE_ID> <!-- valid formats are: -->
|
||||
<APPLICATION_TYPE>mcbr</APPLICATION_TYPE> <!-- OPTIONS: scbr,mcbr,bcbr, gaming_OA, gaming_TF, m2m_AP, m2m_BR, , random, ,full_buffer -->
|
||||
<DESTINATION_ID>1:3</DESTINATION_ID> <!-- valid formats are: -->
|
||||
</PREDEFINED_TRAFFIC>
|
||||
<PREDEFINED_TRAFFIC>
|
||||
<SOURCE_ID>1:3</SOURCE_ID> <!-- valid formats are: -->
|
||||
<APPLICATION_TYPE>scbr</APPLICATION_TYPE> <!-- OPTIONS: scbr,mcbr,bcbr, gaming_OA, gaming_TF, m2m_AP, m2m_BR, , random, ,full_buffer -->
|
||||
<DESTINATION_ID>0</DESTINATION_ID> <!-- valid formats are: -->
|
||||
</PREDEFINED_TRAFFIC>
|
||||
</APPLICATION_CONFIG>
|
||||
|
||||
<EMULATION_CONFIG>
|
||||
<EMULATION_TIME_ms>30000</EMULATION_TIME_ms> <!--set to infinity-->
|
||||
<PERFORMANCE_METRICS>
|
||||
<THROUGHPUT>1</THROUGHPUT>
|
||||
</PERFORMANCE_METRICS>
|
||||
<LOG> <!-- set the global log level -->
|
||||
<LEVEL>debug</LEVEL>
|
||||
<VERBOSITY>medium</VERBOSITY>
|
||||
<INTERVAL>1</INTERVAL>
|
||||
</LOG>
|
||||
<SEED_VALUE>1234</SEED_VALUE> <!-- value 0 means randomly generated by OAI -->
|
||||
|
||||
</EMULATION_CONFIG>
|
||||
|
||||
<PROFILE>OTG_1</PROFILE>
|
||||
</OAI_EMULATION>
|
||||
@@ -0,0 +1,64 @@
|
||||
<OAI_EMULATION>
|
||||
<TOPOLOGY_CONFIG>
|
||||
<AREA>
|
||||
<X_m>5000</X_m>
|
||||
<Y_m>5000</Y_m>
|
||||
</AREA>
|
||||
<MOBILITY>
|
||||
<UE_MOBILITY>
|
||||
<RANDOM_UE_DISTRIBUTION>
|
||||
<NUMBER_OF_NODES>3</NUMBER_OF_NODES>
|
||||
</RANDOM_UE_DISTRIBUTION>
|
||||
<UE_MOBILITY_TYPE>STATIC</UE_MOBILITY_TYPE>
|
||||
</UE_MOBILITY>
|
||||
<eNB_MOBILITY>
|
||||
<eNB_INITIAL_DISTRIBUTION>random</eNB_INITIAL_DISTRIBUTION>
|
||||
<RANDOM_eNB_DISTRIBUTION>
|
||||
<NUMBER_OF_CELLS>1</NUMBER_OF_CELLS>
|
||||
</RANDOM_eNB_DISTRIBUTION>
|
||||
<eNB_MOBILITY_TYPE>STATIC</eNB_MOBILITY_TYPE>
|
||||
</eNB_MOBILITY>
|
||||
</MOBILITY>
|
||||
</TOPOLOGY_CONFIG>
|
||||
|
||||
<APPLICATION_CONFIG>
|
||||
<PREDEFINED_TRAFFIC>
|
||||
<SOURCE_ID>0</SOURCE_ID>
|
||||
<APPLICATION_TYPE>gaming_OA</APPLICATION_TYPE> <!-- OPTIONS: scbr,mcbr,bcbr, gaming_OA, gaming_TF, m2m_AP, m2m_BR, , random, ,full_buffer -->
|
||||
<DESTINATION_ID>3</DESTINATION_ID>
|
||||
</PREDEFINED_TRAFFIC>
|
||||
<CUSTOMIZED_TRAFFIC>
|
||||
<SOURCE_ID>1:3</SOURCE_ID> <!-- <SOURCE_ID> 1:100 </SOURCE_ID> -->
|
||||
<TRANSPORT_PROTOCOL>udp</TRANSPORT_PROTOCOL> <!-- OPTIONS: tcp (default), udp -->
|
||||
<IP_VERSION>ipv6</IP_VERSION> <!-- OPTIONS: ipv4 (default), ipv6 -->
|
||||
<DESTINATION_ID>0</DESTINATION_ID>
|
||||
|
||||
<IDT_DIST>gaussian</IDT_DIST> <!-- OPTIONS: no_transmission (default), uniform, poission, gaussian, exponential,pareto, cauchy,fixed, weibull, gamma,-->
|
||||
<IDT_MIN_ms>100</IDT_MIN_ms>
|
||||
<IDT_MAX_ms>1000</IDT_MAX_ms>
|
||||
<IDT_STANDARD_DEVIATION>4.5</IDT_STANDARD_DEVIATION>
|
||||
|
||||
<SIZE_DIST>pareto</SIZE_DIST> <!-- similar for weibull and cauchy and gamma-->
|
||||
<SIZE_SCALE>0.5</SIZE_SCALE>
|
||||
<SIZE_SHAPE>30</SIZE_SHAPE>
|
||||
|
||||
</CUSTOMIZED_TRAFFIC>
|
||||
|
||||
</APPLICATION_CONFIG>
|
||||
|
||||
<EMULATION_CONFIG>
|
||||
<EMULATION_TIME_ms>5000</EMULATION_TIME_ms> <!--set to infinity-->
|
||||
|
||||
<PERFORMANCE_METRICS>
|
||||
<THROUGHPUT>1</THROUGHPUT>
|
||||
</PERFORMANCE_METRICS>
|
||||
<LOG> <!-- set the global log level -->
|
||||
<LEVEL>debug</LEVEL>
|
||||
<INTERVAL>1</INTERVAL>
|
||||
</LOG>
|
||||
<SEED_VALUE>1234</SEED_VALUE> <!-- value 0 means randomly generated by OAI -->
|
||||
|
||||
</EMULATION_CONFIG>
|
||||
|
||||
<PROFILE>OTG_2</PROFILE>
|
||||
</OAI_EMULATION>
|
||||
@@ -0,0 +1,46 @@
|
||||
#ifdef cygwin
|
||||
#cyg=cygwin
|
||||
#endif
|
||||
|
||||
help:
|
||||
@echo "make one_eNB_two_UE_nas: compiles the code and performs a simulation with IP traffic between two virtual nodes (Linux only)"
|
||||
@echo "make one_eNB_one_UE: compiles the code and performs a small simulation (30 frames) with 1 eNB and 1 UE and checks that RLC data is transported between the two nodes after the connection setup"
|
||||
@echo "make one_eNB_four_UE: comples the code and performs a small simulation (60 frames) with 1 eNB and 4 UE and checks that all 4 UEs have established a complete connection (RRC output is traced)"
|
||||
@echo "make clean: Removes all .o files"
|
||||
|
||||
all: help
|
||||
|
||||
oaisim:
|
||||
(cd $(OPENAIR_TARGETS)/SIMU/USER && $(MAKE) all NAS=1 OAI_NW_DRIVER_TYPE_ETHERNET=1 )
|
||||
oaisim_nas:
|
||||
(cd $(OPENAIR_TARGETS)/SIMU/USER && $(MAKE) all OAI_NW_DRIVER_TYPE_ETHERNET=1 NAS=1)
|
||||
nasmesh:
|
||||
(cd $(OPENAIR2_DIR) && make nasmesh_netlink_address_fix.ko)
|
||||
(cd $(OPENAIR2_DIR)/NAS/DRIVER/MESH/RB_TOOL && make)
|
||||
|
||||
one_eNB_one_UE_nas: oaisim_nas nasmesh
|
||||
./start_one_eNB_multi_UE_nas 1
|
||||
|
||||
one_eNB_two_UE_nas: oaisim_nas nasmesh
|
||||
./start_one_eNB_multi_UE_nas 2
|
||||
|
||||
one_eNB_three_UE_nas: oaisim_nas nasmesh
|
||||
./start_one_eNB_multi_UE_nas 3
|
||||
|
||||
one_eNB_one_UE : oaisim
|
||||
../../USER/oaisim -n30 | egrep SEND_SDU
|
||||
|
||||
one_eNB_four_UE : oaisim
|
||||
../../USER/oaisim -n60 -u4 | egrep "\[RRC\]"
|
||||
|
||||
one_eNB_one_UE_PHY : oaisim_nas nasmesh
|
||||
./start_one_eNB_two_UE_PHY_nas 2
|
||||
|
||||
clean:
|
||||
(cd $(OPENAIR_TARGETS)/SIMU/USER && make clean)
|
||||
|
||||
echo_vars:
|
||||
echo $(OPENAIR1_DIR)
|
||||
echo $(OPENAIR2_DIR)
|
||||
echo $(OPENAIR3_DIR)
|
||||
echo $(OPENAIR_TARGETS)
|
||||
@@ -0,0 +1,53 @@
|
||||
#!/bin/sh
|
||||
echo "Bringup eNB interface"
|
||||
|
||||
sudo rmmod nasmesh
|
||||
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko
|
||||
|
||||
#avoid conflict with reserved multicast addresses (224.0.0.11,224.0.0.13, 224.0.0.16)
|
||||
#sudo route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0
|
||||
sudo ip route add 224.0.0.160/28 dev eth0
|
||||
|
||||
|
||||
echo "bring up oai0 interface for enb"
|
||||
sudo ifconfig oai0 10.0.1.1 netmask 255.255.255.0 broadcast 10.0.1.255
|
||||
echo "bring up oai1 interface for ue 1"
|
||||
sudo ifconfig oai1 10.0.2.2 netmask 255.255.255.0 broadcast 10.0.2.255
|
||||
|
||||
# enb -> ue1
|
||||
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -s 10.0.1.1 -t 10.0.1.2 -r 3
|
||||
# ue1 -> enb
|
||||
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i1 -z0 -s 10.0.2.2 -t 10.0.2.1 -r 3
|
||||
|
||||
if [ $1 -ge 2 ]; then
|
||||
echo "bring up oai2 interface for ue 2"
|
||||
sudo ifconfig oai2 10.0.3.3 netmask 255.255.255.0 broadcast 10.0.3.255
|
||||
|
||||
# enb -> ue2
|
||||
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -s 10.0.1.1 -t 10.0.1.3 -r 11
|
||||
# ue2 -> enb
|
||||
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i2 -z0 -s 10.0.3.3 -t 10.0.3.1 -r 3
|
||||
fi
|
||||
|
||||
if [ $1 -ge 3 ]; then
|
||||
echo "bring up oai3 interface for ue 3"
|
||||
sudo ifconfig oai3 10.0.4.4 netmask 255.255.255.0 broadcast 10.0.4.255
|
||||
|
||||
# enb -> ue2
|
||||
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -s 10.0.1.1 -t 10.0.1.4 -r 19
|
||||
# ue2 -> enb
|
||||
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i3 -z0 -s 10.0.4.4 -t 10.0.4.1 -r 3
|
||||
fi
|
||||
|
||||
if [ $1 -ge 4 ]; then
|
||||
|
||||
echo "add oai interfaces for more UEs here"
|
||||
|
||||
fi
|
||||
|
||||
echo "start the emulation with 1eNB and" $1 "UE"
|
||||
echo "$OPENAIR_TARGETS/SIMU/USER/oaisim -a -u" $1 ">/dev/null"
|
||||
$OPENAIR_TARGETS/SIMU/USER/oaisim -a -u $1 > /dev/null
|
||||
|
||||
|
||||
echo "End"
|
||||
@@ -0,0 +1,53 @@
|
||||
#!/bin/sh
|
||||
echo "Bringup eNB interface"
|
||||
|
||||
sudo rmmod nasmesh
|
||||
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko
|
||||
|
||||
#avoid conflict with reserved multicast addresses (224.0.0.11,224.0.0.13, 224.0.0.16)
|
||||
#sudo route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0
|
||||
sudo ip route add 224.0.0.160/28 dev eth0
|
||||
|
||||
|
||||
echo "bring up oai0 interface for enb"
|
||||
sudo ifconfig oai0 10.0.1.1 netmask 255.255.255.0 broadcast 10.0.1.255
|
||||
echo "bring up oai1 interface for ue 1"
|
||||
sudo ifconfig oai1 10.0.2.2 netmask 255.255.255.0 broadcast 10.0.2.255
|
||||
|
||||
# enb -> ue1
|
||||
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -s 10.0.1.1 -t 10.0.1.2 -r 3
|
||||
# ue1 -> enb
|
||||
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i1 -z0 -s 10.0.2.2 -t 10.0.2.1 -r 3
|
||||
|
||||
if [ $1 -ge 2 ]; then
|
||||
echo "bring up oai2 interface for ue 2"
|
||||
sudo ifconfig oai2 10.0.3.3 netmask 255.255.255.0 broadcast 10.0.3.255
|
||||
|
||||
# enb -> ue2
|
||||
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -s 10.0.1.1 -t 10.0.1.3 -r 11
|
||||
# ue2 -> enb
|
||||
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i2 -z0 -s 10.0.3.3 -t 10.0.3.1 -r 3
|
||||
fi
|
||||
|
||||
if [ $1 -ge 3 ]; then
|
||||
echo "bring up oai3 interface for ue 3"
|
||||
sudo ifconfig oai3 10.0.4.4 netmask 255.255.255.0 broadcast 10.0.4.255
|
||||
|
||||
# enb -> ue2
|
||||
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -s 10.0.1.1 -t 10.0.1.4 -r 19
|
||||
# ue2 -> enb
|
||||
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i3 -z0 -s 10.0.4.4 -t 10.0.4.1 -r 3
|
||||
fi
|
||||
|
||||
if [ $1 -ge 4 ]; then
|
||||
|
||||
echo "add oai interfaces for more UEs here"
|
||||
|
||||
fi
|
||||
|
||||
echo "start the emulation with 1eNB and 2 UE"
|
||||
echo "$OPENAIR_TARGETS/SIMU/USER/oaisim -c40 > /dev/null"
|
||||
$OPENAIR_TARGETS/SIMU/USER/oaisim -c40 > /dev/null
|
||||
|
||||
|
||||
echo "End"
|
||||
+31
@@ -0,0 +1,31 @@
|
||||
|
||||
all: oaisim naslite_netlink_ether
|
||||
|
||||
oaisim:
|
||||
(cd $(OPENAIR_TARGETS)/SIMU/USER && $(MAKE) oaisim OAI_NW_DRIVER_TYPE_ETHERNET=1 NAS=1)
|
||||
|
||||
naslite_netlink_ether:
|
||||
(cd $(OPENAIR2_DIR) && $(MAKE) naslite_netlink_ether.ko)
|
||||
(cd $(OPENAIR2_DIR)/NAS/DRIVER/LITE/RB_TOOL/ && $(MAKE))
|
||||
|
||||
userclean: clean oaisim naslite_netlink_ether
|
||||
|
||||
one_eNB_one_UE_nas: oaisim naslite_netlink_ether
|
||||
/bin/bash ./start_one_eNB_multi_UE_nas 1
|
||||
|
||||
one_eNB_two_UE_nas: oaisim naslite_netlink_ether
|
||||
/bin/bash ./start_one_eNB_multi_UE_nas 2
|
||||
|
||||
one_eNB_three_UE_nas: oaisim naslite_netlink_ether
|
||||
/bin/bash ./start_one_eNB_multi_UE_nas 3
|
||||
|
||||
clean:
|
||||
(cd $(OPENAIR_TARGETS)/SIMU/USER && $(MAKE) clean)
|
||||
(cd $(OPENAIR2_DIR)/NAS/DRIVER/LITE && $(MAKE) clean)
|
||||
|
||||
echo_vars:
|
||||
echo $(OPENAIR1_DIR)
|
||||
echo $(OPENAIR2_DIR)
|
||||
echo $(OPENAIR3_DIR)
|
||||
echo $(OPENAIR_TARGETS)
|
||||
|
||||
@@ -0,0 +1,531 @@
|
||||
#!/bin/bash
|
||||
echo "Bash version ${BASH_VERSION}..."
|
||||
|
||||
declare GENERATE_SEQ_DIAGRAM="no"
|
||||
declare LOG_FILE_LTE="no"
|
||||
#------------------------------------------------
|
||||
declare MAKE_IP_DRIVER_TARGET="naslite_netlink_ether"
|
||||
declare MAKE_LTE_ACCESS_STRATUM_TARGET="oaisim"
|
||||
declare IP_DRIVER_NAME="oai_nw_drv"
|
||||
#------------------------------------------------
|
||||
declare -a NAS_IMEI=( 3 9 1 8 3 6 6 2 0 0 0 0 0 0 )
|
||||
# first value is for ENB, then UE0, UE1, etc.
|
||||
declare -a MARKING=( 1 2 3 4 5 6 7 8 9 10 11 12 14 15 16 )
|
||||
# BE CAREFULL MAY NOT WORK WITH OTHER VALUES (TO DO)
|
||||
declare -i NUM_ENB=1
|
||||
#------------------------------------------------
|
||||
# Notes:
|
||||
# We would like to remove the ipv4 addresses swap in the IP driver code for oai virtualized.
|
||||
# Let's say oai0 has ipv4 @ 10.0.1.1, oai1 has ipv4 @ 10.0.2.2 etc.
|
||||
# In the past when we generated some local traffic on the computer and wanted to make it go
|
||||
# through for example oai1 to oai0, the ipv4 destination address was 10.0.2.1
|
||||
# meaning 10.0.2.2 wants to send a paquet to 10.0.1.1,
|
||||
# so ip_destination[2] has the digit corresponding to the source
|
||||
# so ip_destination[3] has the digit corresponding to the destination
|
||||
# then in the driver we modified at the receiving side (oai0 here) the ip source and destination
|
||||
# addresses in this way:
|
||||
# Originating packet: SRC 10.0.X.X -> 10.0.2.1
|
||||
# Resulting modified packet at the receiving side: SRC 10.0.1.2 -> 10.0.1.1
|
||||
# So the packet could be accepted by the device (same dest @) and the fake source was was recorded (1.2).
|
||||
# So the response to this packet could return to the interface by where the request was pulled.
|
||||
# But this solution lead to recompute checksums of packets in the driver.
|
||||
#
|
||||
# So here we describe a solution where packets are not modified by the IP driver but by the kernel:
|
||||
#
|
||||
# +---------------+ +---------------+ +---------------+
|
||||
# |APP "VIRTUALLY"| |APP "VIRTUALLY"| |APP "VIRTUALLY"| etc
|
||||
# |running on eNB | |running on UE0 | |running on UE1 |
|
||||
# |sending traffic| | | | |
|
||||
# | to UE 1 | | | | |
|
||||
# +---------------+ +---------------+ +---------------+
|
||||
# | ^ | ^ | ^
|
||||
# | | | | | |
|
||||
# Tx packet (n1) | | | Tx packet (n2) |
|
||||
# XXXX->10.0.1.3 | | | XXXX->10.0.1.3 |
|
||||
# | | | | | |
|
||||
# | Rx packet (n2) | | | Rx packet (n1)
|
||||
# | 10.0.1.3->10.0.1.1 | | | 10.0.3.1->10.0.3.3
|
||||
# V | V | V |
|
||||
# +-----------------------------------------------------------------------------+
|
||||
# | IPTABLES Table mangle chain OUTPUT TARGET MARK OPERATION setmark |
|
||||
# | On packets coming from applications |
|
||||
# |-----------------------------------------------------------------------------|
|
||||
# | Example for packet n1: |
|
||||
# | iptables -t mangle -A OUTPUT --dst 10.0.1.3 -j MARK --set-mark 0x0103 |
|
||||
# +-----------------------------------------------------------------------------+
|
||||
# | | | | | |
|
||||
# Tx packet (n1) | | | | |
|
||||
# XXXX->10.0.1.3 | | | | |
|
||||
# mark 0x0103 | | | | |
|
||||
# | | | | | |
|
||||
# V | V | V |
|
||||
# +-----------------------------------------------------------------------------+
|
||||
# | IPTABLES Table nat chain POSTROUTING TARGET SNAT OPERATION --to Fake IP SRC|
|
||||
# | On packets coming from applications |
|
||||
# |-----------------------------------------------------------------------------|
|
||||
# | Example for packet n1: |
|
||||
# | iptables -t nat -A POSTROUTING -m mark --mark 0x0103 -j SNAT --to 10.0.3.1 |
|
||||
# +-----------------------------------------------------------------------------+
|
||||
# | | | | | |
|
||||
# | | | | | Rx packet (n1)
|
||||
# | | | | | 10.0.3.1->10.0.3.3
|
||||
# | | | | | mark 0x0103
|
||||
# | | | | | |
|
||||
# +-----------------------------------------------------------------------------+
|
||||
# | IPTABLES Table mangle chain PREROUTING TARGET MARK OPERATION setmark |
|
||||
# | On packets coming from applications |
|
||||
# |-----------------------------------------------------------------------------|
|
||||
# | Example for packet n1: |
|
||||
# | iptables -t nat -A PREROUTING -m mark --mark 0x0103 -j DNAT --to 10.0.3.3 |
|
||||
# +-----------------------------------------------------------------------------+
|
||||
# | ^ | ^ | ^
|
||||
# | | | | | |
|
||||
# Tx packet (n1) | | | | Rx packet (n1)
|
||||
# 10.0.3.1->10.0.1.3 | | | 10.0.3.1->10.0.1.3
|
||||
# mark 0x0103 | | | | mark 0x0103
|
||||
# | | | | | |
|
||||
# +-----------------------------------------------------------------------------+
|
||||
# | IPTABLES Table mangle chain PREROUTING TARGET MARK OPERATION setmark |
|
||||
# | On packets coming from applications |
|
||||
# |-----------------------------------------------------------------------------|
|
||||
# | Example for packet n1: |
|
||||
# | iptables -t mangle -A PREROUTING --dst 10.0.1.3 -j MARK --set-mark 0x0103 |
|
||||
# +-----------------------------------------------------------------------------+
|
||||
# | ^ | ^ | ^
|
||||
# | | | | | Rx packet (n1)
|
||||
# | | | | | 10.0.3.1->10.0.1.3
|
||||
# | | | | | |
|
||||
# |10.0.1.1| |10.0.2.2| |10.0.3.3|
|
||||
# V | V | V |
|
||||
# +----------+ +----------+ +----------+
|
||||
# | oai0 | | oai1 | | oai2 |
|
||||
# | (eNB) | | (UE0) | | (UE1) |
|
||||
# +----------+ +----------+ +----------+
|
||||
|
||||
####################################################################################
|
||||
# HERE IS A DISPLAY OF THE CONTENT OF THE NAT TABLE FOR THE DESCRIBED SETTING
|
||||
####################################################################################
|
||||
# Chain PREROUTING (policy ACCEPT 1108 packets, 242K bytes)
|
||||
# pkts bytes target prot opt in out source destination
|
||||
# 0 0 DNAT all -- * * 0.0.0.0/0 0.0.0.0/0 mark match 0x102 to:10.0.2.2
|
||||
# 0 0 DNAT all -- * * 0.0.0.0/0 0.0.0.0/0 mark match 0x103 to:10.0.3.3
|
||||
# 0 0 DNAT all -- * * 0.0.0.0/0 0.0.0.0/0 mark match 0x201 to:10.0.1.1
|
||||
# 0 0 DNAT all -- * * 0.0.0.0/0 0.0.0.0/0 mark match 0x203 to:10.0.3.3
|
||||
# 0 0 DNAT all -- * * 0.0.0.0/0 0.0.0.0/0 mark match 0x301 to:10.0.1.1
|
||||
# 0 0 DNAT all -- * * 0.0.0.0/0 0.0.0.0/0 mark match 0x302 to:10.0.2.2
|
||||
#
|
||||
# Chain POSTROUTING (policy ACCEPT 2118 packets, 175K bytes)
|
||||
# pkts bytes target prot opt in out source destination
|
||||
# 0 0 SNAT all -- * * 0.0.0.0/0 0.0.0.0/0 mark match 0x102 to:10.0.2.1
|
||||
# 0 0 SNAT all -- * * 0.0.0.0/0 0.0.0.0/0 mark match 0x103 to:10.0.3.1
|
||||
# 0 0 SNAT all -- * * 0.0.0.0/0 0.0.0.0/0 mark match 0x201 to:10.0.1.2
|
||||
# 0 0 SNAT all -- * * 0.0.0.0/0 0.0.0.0/0 mark match 0x203 to:10.0.3.2
|
||||
# 0 0 SNAT all -- * * 0.0.0.0/0 0.0.0.0/0 mark match 0x301 to:10.0.1.3
|
||||
# 0 0 SNAT all -- * * 0.0.0.0/0 0.0.0.0/0 mark match 0x302 to:10.0.2.3
|
||||
#
|
||||
# Chain OUTPUT (policy ACCEPT 2133 packets, 186K bytes)
|
||||
# pkts bytes target prot opt in out source destination
|
||||
####################################################################################
|
||||
# HERE IS A DISPLAY OF THE CONTENT OF THE MANGLE TABLE FOR THE DESCRIBED SETTING
|
||||
####################################################################################
|
||||
#root@hades:~# iptables -t mangle -nvL
|
||||
# Chain PREROUTING (policy ACCEPT 2008K packets, 316M bytes)
|
||||
# pkts bytes target prot opt in out source destination
|
||||
# 0 0 MARK all -- * * 0.0.0.0/0 10.0.1.2 MARK xset 0x102/0xffffffff
|
||||
# 0 0 MARK all -- * * 0.0.0.0/0 10.0.1.3 MARK xset 0x103/0xffffffff
|
||||
# 0 0 MARK all -- * * 0.0.0.0/0 10.0.2.1 MARK xset 0x201/0xffffffff
|
||||
# 0 0 MARK all -- * * 0.0.0.0/0 10.0.2.3 MARK xset 0x203/0xffffffff
|
||||
# 0 0 MARK all -- * * 0.0.0.0/0 10.0.3.1 MARK xset 0x301/0xffffffff
|
||||
# 0 0 MARK all -- * * 0.0.0.0/0 10.0.3.2 MARK xset 0x302/0xffffffff
|
||||
#
|
||||
# Chain INPUT (policy ACCEPT 2008K packets, 316M bytes)
|
||||
# pkts bytes target prot opt in out source destination
|
||||
#
|
||||
# Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
|
||||
# pkts bytes target prot opt in out source destination
|
||||
#
|
||||
# Chain OUTPUT (policy ACCEPT 1989K packets, 331M bytes)
|
||||
# pkts bytes target prot opt in out source destination
|
||||
# 0 0 MARK all -- * * 0.0.0.0/0 10.0.1.2 MARK xset 0x102/0xffffffff
|
||||
# 0 0 MARK all -- * * 0.0.0.0/0 10.0.1.3 MARK xset 0x103/0xffffffff
|
||||
# 0 0 MARK all -- * * 0.0.0.0/0 10.0.2.1 MARK xset 0x201/0xffffffff
|
||||
# 0 0 MARK all -- * * 0.0.0.0/0 10.0.2.3 MARK xset 0x203/0xffffffff
|
||||
# 0 0 MARK all -- * * 0.0.0.0/0 10.0.3.1 MARK xset 0x301/0xffffffff
|
||||
# 0 0 MARK all -- * * 0.0.0.0/0 10.0.3.2 MARK xset 0x302/0xffffffff
|
||||
#
|
||||
# Chain POSTROUTING (policy ACCEPT 1990K packets, 331M bytes)
|
||||
# pkts bytes target prot opt in out source destination
|
||||
#
|
||||
####################################################################################
|
||||
# We also avoid the manipulation of ipv4 ARP packets by setting ourselves the neighbour cache:
|
||||
####################################################################################
|
||||
#root@hades:~# ip neigh show
|
||||
#...
|
||||
#10.0.3.1 dev oai1 lladdr 00:39:18:36:62:00 PERMANENT
|
||||
#10.0.2.1 dev oai1 lladdr 00:39:18:36:62:00 PERMANENT
|
||||
#10.0.1.1 dev oai1 lladdr 00:39:18:36:62:00 PERMANENT
|
||||
#...
|
||||
#10.0.1.2 dev oai0 lladdr 00:39:18:36:62:01 PERMANENT
|
||||
#10.0.2.2 dev oai0 lladdr 00:39:18:36:62:01 PERMANENT
|
||||
#10.0.3.2 dev oai0 lladdr 00:39:18:36:62:01 PERMANENT
|
||||
#...
|
||||
#10.0.1.3 dev oai0 lladdr 00:39:18:36:62:02 PERMANENT
|
||||
#10.0.2.3 dev oai0 lladdr 00:39:18:36:62:02 PERMANENT
|
||||
#10.0.3.3 dev oai0 lladdr 00:39:18:36:62:02 PERMANENT
|
||||
|
||||
#
|
||||
|
||||
###########################################################
|
||||
IPTABLES=/sbin/iptables
|
||||
THIS_SCRIPT_PATH=$(dirname $(readlink -f $0))
|
||||
declare -x OPENAIR_DIR=""
|
||||
declare -x OPENAIR1_DIR=""
|
||||
declare -x OPENAIR2_DIR=""
|
||||
declare -x OPENAIR3_DIR=""
|
||||
declare -x OPENAIR_TARGETS=""
|
||||
###########################################################
|
||||
|
||||
|
||||
black='\E[30m'
|
||||
red='\E[31m'
|
||||
green='\E[32m'
|
||||
yellow='\E[33m'
|
||||
blue='\E[34m'
|
||||
magenta='\E[35m'
|
||||
cyan='\E[36m'
|
||||
white='\E[37m'
|
||||
|
||||
ROOT_UID=0
|
||||
E_NOTROOT=67
|
||||
|
||||
|
||||
cecho() # Color-echo
|
||||
# arg1 = message
|
||||
# arg2 = color
|
||||
{
|
||||
local default_msg="No Message."
|
||||
message=${1:-$default_msg}
|
||||
color=${2:-$black}
|
||||
echo -e "$color"
|
||||
echo -n "$message"
|
||||
tput sgr0
|
||||
echo
|
||||
return
|
||||
}
|
||||
|
||||
echo_error() {
|
||||
local my_string=""
|
||||
until [ -z "$1" ]
|
||||
do
|
||||
my_string="$my_string$1"
|
||||
shift
|
||||
done
|
||||
cecho "$my_string" $red
|
||||
}
|
||||
|
||||
echo_warning() {
|
||||
local my_string=""
|
||||
until [ -z "$1" ]
|
||||
do
|
||||
my_string="$my_string$1"
|
||||
shift
|
||||
done
|
||||
cecho "$my_string" $yellow
|
||||
}
|
||||
|
||||
echo_success() {
|
||||
local my_string=""
|
||||
until [ -z "$1" ]
|
||||
do
|
||||
my_string="$my_string$1"
|
||||
shift
|
||||
done
|
||||
cecho "$my_string" $green
|
||||
}
|
||||
|
||||
set_openair() {
|
||||
path=`pwd`
|
||||
declare -i length_path
|
||||
declare -i index
|
||||
length_path=${#path}
|
||||
|
||||
index=`echo $path | grep -b -o 'targets' | cut -d: -f1`
|
||||
#echo ${path%$token*}
|
||||
if [[ $index -lt $length_path && index -gt 0 ]]
|
||||
then
|
||||
declare -x OPENAIR_DIR
|
||||
index=`expr $index - 1`
|
||||
openair_path=`echo $path | cut -c1-$index`
|
||||
#openair_path=`echo ${path:0:$index}`
|
||||
export OPENAIR_DIR=$openair_path
|
||||
export OPENAIR1_DIR=$openair_path/openair1
|
||||
export OPENAIR2_DIR=$openair_path/openair2
|
||||
export OPENAIR3_DIR=$openair_path/openair3
|
||||
export OPENAIR_TARGETS=$openair_path/targets
|
||||
return 0
|
||||
fi
|
||||
return -1
|
||||
}
|
||||
|
||||
bash_exec() {
|
||||
output=$($1 2>&1)
|
||||
result=$?
|
||||
if [ $result -eq 0 ]
|
||||
then
|
||||
echo_success "$1"
|
||||
else
|
||||
echo_error "$1: $output"
|
||||
fi
|
||||
}
|
||||
|
||||
wait_process_started () {
|
||||
if [ -z "$1" ]
|
||||
then
|
||||
echo_error "WAITING FOR PROCESS START: NO PROCESS"
|
||||
return 1
|
||||
fi
|
||||
ps -C $1 > /dev/null 2>&1
|
||||
while [ $? -ne 0 ]; do
|
||||
echo_warning "WAITING FOR $1 START"
|
||||
sleep 2
|
||||
ps -C $1 > /dev/null 2>&1
|
||||
done
|
||||
echo_success "PROCESS $1 STARTED"
|
||||
return 0
|
||||
}
|
||||
|
||||
assert() {
|
||||
# If condition false
|
||||
# exit from script with error message
|
||||
E_PARAM_ERR=98
|
||||
E_PARAM_FAILED=99
|
||||
|
||||
if [ -z "$2" ] # Not enought parameters passed.
|
||||
then
|
||||
return $E_PARAM_ERR
|
||||
fi
|
||||
|
||||
lineno=$2
|
||||
if [ ! $1 ]
|
||||
then
|
||||
echo "Assertion failed: \"$1\""
|
||||
echo "File \"$0\", line $lineno"
|
||||
exit $E_ASSERT_FAILED
|
||||
fi
|
||||
}
|
||||
|
||||
ctrl_c() {
|
||||
bash_exec "pkill oaisim"
|
||||
bash_exec "ip link set $LTEIF down"
|
||||
|
||||
bash_exec "rmmod $IP_DRIVER_NAME"
|
||||
|
||||
bash_exec "$IPTABLES -P INPUT ACCEPT"
|
||||
bash_exec "$IPTABLES -F INPUT"
|
||||
bash_exec "$IPTABLES -P OUTPUT ACCEPT"
|
||||
bash_exec "$IPTABLES -F OUTPUT"
|
||||
bash_exec "$IPTABLES -P FORWARD ACCEPT"
|
||||
bash_exec "$IPTABLES -F FORWARD"
|
||||
bash_exec "$IPTABLES -t nat -F"
|
||||
bash_exec "$IPTABLES -t mangle -F"
|
||||
bash_exec "$IPTABLES -t filter -F"
|
||||
bash_exec "ip route flush cache"
|
||||
}
|
||||
|
||||
|
||||
set_openair
|
||||
cecho "OPENAIR_DIR = $OPENAIR_DIR" $green
|
||||
cecho "OPENAIR1_DIR = $OPENAIR1_DIR" $green
|
||||
cecho "OPENAIR2_DIR = $OPENAIR2_DIR" $green
|
||||
cecho "OPENAIR3_DIR = $OPENAIR3_DIR" $green
|
||||
cecho "OPENAIR_TARGETS = $OPENAIR_TARGETS" $green
|
||||
|
||||
|
||||
declare -i NUM_MOBILES
|
||||
declare -i INSTANCE
|
||||
declare -i IP_SOURCE
|
||||
declare -i IP_DEST
|
||||
declare -i IP
|
||||
declare -i RB_ID
|
||||
declare -i CLASSIFIER_ID
|
||||
|
||||
|
||||
trap ctrl_c INT
|
||||
|
||||
bash_exec "ip route flush cache"
|
||||
bash_exec "$IPTABLES -P INPUT ACCEPT"
|
||||
bash_exec "$IPTABLES -F INPUT"
|
||||
bash_exec "$IPTABLES -P OUTPUT ACCEPT"
|
||||
bash_exec "$IPTABLES -F OUTPUT"
|
||||
bash_exec "$IPTABLES -P FORWARD DROP"
|
||||
bash_exec "$IPTABLES -F FORWARD"
|
||||
bash_exec "$IPTABLES -t nat -F"
|
||||
bash_exec "$IPTABLES -t mangle -F"
|
||||
bash_exec "$IPTABLES -t filter -F"
|
||||
|
||||
|
||||
NUM_MOBILES=$1
|
||||
|
||||
for ((i=0 ; i < `expr $NUM_MOBILES + $NUM_ENB`; i++ ))
|
||||
do
|
||||
TEST_OAI=`/sbin/ifconfig | grep oai$i | awk '{print $1}'`
|
||||
if [ "$TEST_OAI" = oai"$i"x ]; then
|
||||
bash_exec "ip link set oai$i down"
|
||||
fi
|
||||
done
|
||||
|
||||
|
||||
|
||||
echo "Bringup OAI network interfaces"
|
||||
|
||||
bash_exec "rmmod $IP_DRIVER_NAME"
|
||||
cecho "make $MAKE_IP_DRIVER_TARGET $MAKE_LTE_ACCESS_STRATUM_TARGET....." $green
|
||||
bash_exec "make $MAKE_IP_DRIVER_TARGET $MAKE_LTE_ACCESS_STRATUM_TARGET"
|
||||
bash_exec "insmod $OPENAIR2_DIR/NAS/DRIVER/LITE/$IP_DRIVER_NAME.ko oai_nw_drv_IMEI=${NAS_IMEI[0]},${NAS_IMEI[1]},${NAS_IMEI[2]},${NAS_IMEI[3]},${NAS_IMEI[4]},${NAS_IMEI[5]},${NAS_IMEI[6]},${NAS_IMEI[7]},${NAS_IMEI[8]},${NAS_IMEI[9]},${NAS_IMEI[10]},${NAS_IMEI[11]},${NAS_IMEI[12]},${NAS_IMEI[13]}"
|
||||
|
||||
|
||||
NUM_MOBILES=$1
|
||||
IP=1
|
||||
|
||||
########################
|
||||
# #
|
||||
# CONFIGURE OAI IF #
|
||||
# #
|
||||
########################
|
||||
for ((i=0 ; i < `expr $NUM_MOBILES + $NUM_ENB`; i++ ))
|
||||
do
|
||||
bash_exec "ip link set oai$i broadcast ff:ff:ff:ff:ff:ff"
|
||||
bash_exec "ip link set oai$i up"
|
||||
sleep 1
|
||||
|
||||
bash_exec "ifconfig oai$i 10.0.$IP.$IP netmask 255.255.255.0 broadcast 10.0.$IP.255"
|
||||
|
||||
sleep 1
|
||||
bash_exec "ip addr add dev oai$i 2001:$IP::$IP/64"
|
||||
|
||||
# avoid arp in virtualization
|
||||
for ((j=0 ; j <= $NUM_MOBILES ; j++ ))
|
||||
do
|
||||
if [[ $i -ne $j ]]
|
||||
then
|
||||
bash_exec "ip neighbour add to 10.0.$IP.$IP lladdr 00:${NAS_IMEI[0]}${NAS_IMEI[1]}:${NAS_IMEI[2]}${NAS_IMEI[3]}:${NAS_IMEI[4]}${NAS_IMEI[5]}:${NAS_IMEI[6]}${NAS_IMEI[7]}:${NAS_IMEI[8]}$i nud permanent dev oai$j"
|
||||
fi
|
||||
done
|
||||
let IP=IP+1
|
||||
done
|
||||
|
||||
for ((src=0 ; src < `expr $NUM_ENB + $NUM_MOBILES` ; src++))
|
||||
do
|
||||
let IP_SRC=$src+1
|
||||
for ((dst=0 ; dst < `expr $NUM_ENB + $NUM_MOBILES` ; dst++))
|
||||
do
|
||||
if [[ $src -ne $dst ]]
|
||||
then
|
||||
let IP_DST=$dst+1
|
||||
let marksrc=${MARKING[$src]}
|
||||
marksrc16=`printf '%02x' $marksrc`
|
||||
let markdst=${MARKING[$dst]}
|
||||
markdst16=`printf '%02x' $markdst`
|
||||
bash_exec "iptables -t mangle -A OUTPUT --dst 10.0.$IP_SRC.$IP_DST -j MARK --set-mark 0x$marksrc16$markdst16"
|
||||
bash_exec "iptables -t nat -A POSTROUTING -m mark --mark 0x$marksrc16$markdst16 -j SNAT --to 10.0.$IP_DST.$IP_SRC"
|
||||
|
||||
# we can use same mark since not same path (PREROUTING)
|
||||
bash_exec "iptables -t mangle -A PREROUTING --dst 10.0.$IP_SRC.$IP_DST -j MARK --set-mark 0x$marksrc16$markdst16"
|
||||
bash_exec "iptables -t nat -A PREROUTING -m mark --mark 0x$marksrc16$markdst16 -j DNAT --to 10.0.$IP_DST.$IP_DST"
|
||||
fi
|
||||
done
|
||||
done
|
||||
|
||||
echo "########################################################################################"
|
||||
echo "# IPTABLES MANGLE #"
|
||||
echo "########################################################################################"
|
||||
iptables -t mangle -nvL
|
||||
echo "########################################################################################"
|
||||
echo "# IPTABLES NAT #"
|
||||
echo "########################################################################################"
|
||||
iptables -t nat -nvL
|
||||
|
||||
########################
|
||||
# #
|
||||
# CONFIGURE RABS #
|
||||
# #
|
||||
########################
|
||||
# Loop Cx 0 -> NUM_MOBILES - 1 for configuring default RABS on eNB
|
||||
CLASSIFIER_ID=4
|
||||
for ((instance=0 ; instance < $NUM_ENB ; instance++ ))
|
||||
do
|
||||
let IP_SRC=instance+1
|
||||
for ((cx=0 ; cx < $NUM_MOBILES ; cx++ ))
|
||||
do
|
||||
let IP_DEST=cx+2
|
||||
if [[ $IP_SRC -ne $IP_DEST ]]
|
||||
then
|
||||
# ON eNB
|
||||
let RB_ID=(cx*8)+3
|
||||
bash_exec "$OPENAIR2_DIR/NAS/DRIVER/LITE/RB_TOOL/rb_tool -a -c$cx -i$instance -f$CLASSIFIER_ID -z0 -s 10.0.$IP_DEST.$IP_SRC/32 -t 10.0.$IP_SRC.$IP_DEST/32 -r $RB_ID"
|
||||
let CLASSIFIER_ID=CLASSIFIER_ID+2
|
||||
|
||||
# ON UE
|
||||
let IP_SOURCE=instance+1
|
||||
let instance_ue=cx+$NUM_ENB
|
||||
RB_ID=3
|
||||
bash_exec "$OPENAIR2_DIR/NAS/DRIVER/LITE/RB_TOOL/rb_tool -a -c$instance -i$instance_ue -f$CLASSIFIER_ID -z0 -s 10.0.$IP_SRC.$IP_DEST/32 -t 10.0.$IP_DEST.$IP_SRC/32 -r $RB_ID"
|
||||
let CLASSIFIER_ID=CLASSIFIER_ID+2
|
||||
|
||||
# ON eNB
|
||||
bash_exec "ip neighbour add to 10.0.$IP_SRC.$IP_DEST lladdr 00:${NAS_IMEI[0]}${NAS_IMEI[1]}:${NAS_IMEI[2]}${NAS_IMEI[3]}:${NAS_IMEI[4]}${NAS_IMEI[5]}:${NAS_IMEI[6]}${NAS_IMEI[7]}:${NAS_IMEI[8]}$instance_ue nud permanent dev oai$instance"
|
||||
|
||||
# ON UE
|
||||
bash_exec "ip neighbour add to 10.0.$IP_DEST.$IP_SRC lladdr 00:${NAS_IMEI[0]}${NAS_IMEI[1]}:${NAS_IMEI[2]}${NAS_IMEI[3]}:${NAS_IMEI[4]}${NAS_IMEI[5]}:${NAS_IMEI[6]}${NAS_IMEI[7]}:${NAS_IMEI[8]}$instance nud permanent dev oai$instance_ue"
|
||||
fi
|
||||
done
|
||||
done
|
||||
|
||||
|
||||
IP=1
|
||||
for ((i=0 ; i < `expr $NUM_MOBILES + $NUM_ENB`; i++ ))
|
||||
do
|
||||
# avoid arp in virtualization
|
||||
for ((j=0 ; j <= $NUM_MOBILES ; j++ ))
|
||||
do
|
||||
if [[ $i -ne $j ]]
|
||||
then
|
||||
bash_exec "ip neighbour add to 10.0.$IP.$IP lladdr 00:${NAS_IMEI[0]}${NAS_IMEI[1]}:${NAS_IMEI[2]}${NAS_IMEI[3]}:${NAS_IMEI[4]}${NAS_IMEI[5]}:${NAS_IMEI[6]}${NAS_IMEI[7]}:${NAS_IMEI[8]}$i nud permanent dev oai$j"
|
||||
fi
|
||||
done
|
||||
let IP=IP+1
|
||||
done
|
||||
|
||||
# echo "start the emulation with 1eNB and" $1 "UE"
|
||||
if [ "$GENERATE_SEQ_DIAGRAM"x = yesx ]; then
|
||||
if [ -e /tmp/msc_log.txt ]; then
|
||||
bash_exec "rm -f /tmp/msc_log.txt"
|
||||
fi
|
||||
|
||||
if [ "$LOG_FILE_LTE"x = yesx ]; then
|
||||
if [ -e /tmp/lte_log.txt ]; then
|
||||
bash_exec "rm -f /tmp/lte_log.txt"
|
||||
fi
|
||||
$OPENAIR_TARGETS/SIMU/USER/oaisim -a -u $1 > /tmp/lte_log.txt
|
||||
chmod 777 /tmp/lte_log.txt
|
||||
cat /tmp/lte_log.txt | grep MSC_ > /tmp/msc_log.txt
|
||||
else
|
||||
$OPENAIR_TARGETS/SIMU/USER/oaisim -a -u $1 | grep MSC_ > /tmp/msc_log.txt
|
||||
fi
|
||||
chmod 777 /tmp/msc_log.txt
|
||||
echo "End of emulation, now generating sequence diagrams..."
|
||||
$OPENAIR_TARGETS/SCRIPTS/msc_gen.py /tmp/msc_log.txt
|
||||
else
|
||||
if [ "$LOG_FILE_LTE"x = yesx ]; then
|
||||
if [ -e /tmp/lte_log.txt ]; then
|
||||
bash_exec "rm -f /tmp/lte_log.txt"
|
||||
fi
|
||||
$OPENAIR_TARGETS/SIMU/USER/oaisim -a -u $1 > /tmp/lte_log.txt
|
||||
chmod 777 /tmp/lte_log.txt
|
||||
else
|
||||
$OPENAIR_TARGETS/SIMU/USER/oaisim -a -u $1 -F > /tmp/lte_log.txt
|
||||
fi
|
||||
echo "End of emulation"
|
||||
fi
|
||||
|
||||
|
||||
Reference in New Issue
Block a user