diff --git a/cmake_targets/autotests/README.txt b/cmake_targets/autotests/README.txt index 7c3ae65070..506fc3321d 100644 --- a/cmake_targets/autotests/README.txt +++ b/cmake_targets/autotests/README.txt @@ -137,7 +137,13 @@ Obj.# Case# Test# Description 01 59 lte-softmodem tests with USRP X310 RF as eNB and OAI EPC (eNB and EPC are on same machines) w/ Bandrich COTS UE -01 61 lte-softmodem tests with USRP X310 RF as eNB and OAI EPC (eNB and EPC are on different machines) w/ Bandrich COTS UE +01 60 lte-softmodem tests with USRP X310 RF as eNB and OAI EPC (eNB and EPC are on different machines) w/ Bandrich COTS UE +01 60 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX +01 60 01 Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX +01 60 02 Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX +01 60 03 Band 7 FDD 5MHz DL Throughput for 300 sec for 1TX/1RX +01 60 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX +01 60 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX 01 61 lte-softmodem tests with EXMIMO RF as eNB and ALU EPC w/ Bandrich COTS UE for `TX/1RX, 2TX/2RX 01 61 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX @@ -148,7 +154,14 @@ Obj.# Case# Test# Description 01 61 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX 01 62 lte-softmodem tests with EXMIMO RF as eNB and OAI EPC (eNB and EPC are on same machines) w/ Bandrich COTS UE + 01 63 lte-softmodem tests with EXMIMO RF as eNB and OAI EPC (eNB and EPC are on different machines) w/ Bandrich COTS UE +01 63 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX +01 63 01 Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX +01 63 02 Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX +01 63 03 Band 7 FDD 5MHz DL Throughput for 300 sec for 1TX/1RX +01 63 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX +01 63 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX 01 64 lte-softmodem-noS1 tests diff --git a/cmake_targets/autotests/test_case_list.xml b/cmake_targets/autotests/test_case_list.xml index 81f8b0eb58..39ae56d506 100644 --- a/cmake_targets/autotests/test_case_list.xml +++ b/cmake_targets/autotests/test_case_list.xml @@ -10,7 +10,7 @@ sudo -S -E /opt/ltebox/tools/stop_ltebox $OPENAIR_DIR/cmake_targets/build_oai -w EXMIMO -c; sudo -S -E $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2; dmesg|tail 36000 - 0104+ 015502 015505 015506 015507 015508 015508 015509 015510 015511 015602 015605 015702 015705 016102 016105 + 0104+ 015506 015507 015508 015509 015510 015511 015602 015605 015702 015705 015802 015805 016002 016005 016102 016105 016302 016305 3 mozart calisson stevens nano amerique @@ -861,10 +861,7 @@ amerique 390 /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 25 @@ -894,11 +891,9 @@ False /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" - $OPENAIR_DIR/cmake_targets/build_oai - --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue @@ -911,15 +906,11 @@ sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue /tmp - BUILD/EPC/epc.local.enb.conf.in MCC \"208\" - BUILD/EPC/epc.local.enb.conf.in MNC \"92\" - BUILD/EPC/epc.local.enb.conf.in TAC \"1\" - BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" - BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" - SCRIPTS/build_epc - -c -l - SCRIPTS/build_hss - -c -l + + + + + @@ -945,10 +936,7 @@ amerique 390 /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50 @@ -978,11 +966,9 @@ True /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" - $OPENAIR_DIR/cmake_targets/build_oai - --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue @@ -995,15 +981,11 @@ sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue /tmp - BUILD/EPC/epc.local.enb.conf.in MCC \"208\" - BUILD/EPC/epc.local.enb.conf.in MNC \"92\" - BUILD/EPC/epc.local.enb.conf.in TAC \"1\" - BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" - BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" - SCRIPTS/build_epc - -c -l - SCRIPTS/build_hss - -c -l + + + + + @@ -1028,10 +1010,7 @@ amerique 390 /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 100 @@ -1061,11 +1040,9 @@ True /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" - $OPENAIR_DIR/cmake_targets/build_oai - --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue @@ -1078,15 +1055,11 @@ sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue /tmp - BUILD/EPC/epc.local.enb.conf.in MCC \"208\" - BUILD/EPC/epc.local.enb.conf.in MNC \"92\" - BUILD/EPC/epc.local.enb.conf.in TAC \"1\" - BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" - BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" - SCRIPTS/build_epc - -c -l - SCRIPTS/build_hss - -c -l + + + + + @@ -1111,10 +1084,7 @@ amerique 390 /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 25 @@ -1144,11 +1114,9 @@ True /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" - $OPENAIR_DIR/cmake_targets/build_oai - --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue @@ -1161,15 +1129,11 @@ /tmp - BUILD/EPC/epc.local.enb.conf.in MCC \"208\" - BUILD/EPC/epc.local.enb.conf.in MNC \"92\" - BUILD/EPC/epc.local.enb.conf.in TAC \"1\" - BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" - BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" - SCRIPTS/build_epc - -c -l - SCRIPTS/build_hss - -c -l + + + + + @@ -1193,10 +1157,7 @@ amerique 390 /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50 @@ -1226,11 +1187,8 @@ True /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" - $OPENAIR_DIR/cmake_targets/build_oai - --eNB -w USRP -x -c + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue @@ -1244,15 +1202,11 @@ /tmp - BUILD/EPC/epc.local.enb.conf.in MCC \"208\" - BUILD/EPC/epc.local.enb.conf.in MNC \"92\" - BUILD/EPC/epc.local.enb.conf.in TAC \"1\" - BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" - BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" - SCRIPTS/build_epc - -c -l - SCRIPTS/build_hss - -c -l + + + + + @@ -1276,10 +1230,7 @@ amerique 390 /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 100 @@ -1309,11 +1260,9 @@ True /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" - $OPENAIR_DIR/cmake_targets/build_oai - --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue @@ -1327,15 +1276,11 @@ /tmp - BUILD/EPC/epc.local.enb.conf.in MCC \"208\" - BUILD/EPC/epc.local.enb.conf.in MNC \"92\" - BUILD/EPC/epc.local.enb.conf.in TAC \"1\" - BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" - BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" - SCRIPTS/build_epc - -c -l - SCRIPTS/build_hss - -c -l + + + + + @@ -1360,10 +1305,7 @@ amerique 390 /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 25 @@ -1393,11 +1335,9 @@ True /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" - $OPENAIR_DIR/cmake_targets/build_oai - --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue;$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue @@ -1410,15 +1350,11 @@ sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue /tmp - BUILD/EPC/epc.local.enb.conf.in MCC \"208\" - BUILD/EPC/epc.local.enb.conf.in MNC \"92\" - BUILD/EPC/epc.local.enb.conf.in TAC \"1\" - BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" - BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" - SCRIPTS/build_epc - -c -l - SCRIPTS/build_hss - -c -l + + + + + @@ -1444,10 +1380,7 @@ amerique 390 /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50 @@ -1477,11 +1410,8 @@ True /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" - $OPENAIR_DIR/cmake_targets/build_oai - --eNB -w USRP -x -c + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue;$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue @@ -1494,15 +1424,11 @@ sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue /tmp - BUILD/EPC/epc.local.enb.conf.in MCC \"208\" - BUILD/EPC/epc.local.enb.conf.in MNC \"92\" - BUILD/EPC/epc.local.enb.conf.in TAC \"1\" - BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" - BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" - SCRIPTS/build_epc - -c -l - SCRIPTS/build_hss - -c -l + + + + + @@ -1527,10 +1453,7 @@ amerique 390 /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 100 @@ -1560,11 +1483,9 @@ True /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" - $OPENAIR_DIR/cmake_targets/build_oai - --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue @@ -1577,15 +1498,11 @@ sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue /tmp - BUILD/EPC/epc.local.enb.conf.in MCC \"208\" - BUILD/EPC/epc.local.enb.conf.in MNC \"92\" - BUILD/EPC/epc.local.enb.conf.in TAC \"1\" - BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" - BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" - SCRIPTS/build_epc - -c -l - SCRIPTS/build_hss - -c -l + + + + + @@ -1610,10 +1527,7 @@ amerique 390 /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 25 @@ -1643,11 +1557,9 @@ True /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" - $OPENAIR_DIR/cmake_targets/build_oai - --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue @@ -1661,15 +1573,11 @@ /tmp - BUILD/EPC/epc.local.enb.conf.in MCC \"208\" - BUILD/EPC/epc.local.enb.conf.in MNC \"92\" - BUILD/EPC/epc.local.enb.conf.in TAC \"1\" - BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" - BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" - SCRIPTS/build_epc - -c -l - SCRIPTS/build_hss - -c -l + + + + + @@ -1693,10 +1601,7 @@ amerique 390 /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50 @@ -1726,11 +1631,9 @@ True /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" - $OPENAIR_DIR/cmake_targets/build_oai - --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue @@ -1744,15 +1647,11 @@ /tmp - BUILD/EPC/epc.local.enb.conf.in MCC \"208\" - BUILD/EPC/epc.local.enb.conf.in MNC \"92\" - BUILD/EPC/epc.local.enb.conf.in TAC \"1\" - BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" - BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" - SCRIPTS/build_epc - -c -l - SCRIPTS/build_hss - -c -l + + + + + @@ -1776,10 +1675,7 @@ amerique 390 /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 100 @@ -1809,11 +1705,9 @@ True /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" - $OPENAIR_DIR/cmake_targets/build_oai - --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue @@ -1827,15 +1721,11 @@ /tmp - BUILD/EPC/epc.local.enb.conf.in MCC \"208\" - BUILD/EPC/epc.local.enb.conf.in MNC \"92\" - BUILD/EPC/epc.local.enb.conf.in TAC \"1\" - BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" - BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" - SCRIPTS/build_epc - -c -l - SCRIPTS/build_hss - -c -l + + + + + @@ -2665,12 +2555,12 @@ BUILD/EPC/epc.conf.in MCC \"208\" BUILD/EPC/epc.conf.in MNC \"92\" BUILD/EPC/epc.conf.in TAC \"1\" - BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0:1\" - BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.170.0.1/24\" - BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0:2\"; - BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.170.1.1/24\"; - BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" - BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0\" + BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\" + BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0\"; + BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\"; + BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth0\" + BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\" BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\" $OPENAIRCN_DIR/SCRIPTS/build_epc -c -l @@ -2749,12 +2639,12 @@ BUILD/EPC/epc.conf.in MCC \"208\" BUILD/EPC/epc.conf.in MNC \"92\" BUILD/EPC/epc.conf.in TAC \"1\" - BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0:1\" - BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.170.0.1/24\" - BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0:2\"; - BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.170.1.1/24\"; - BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" - BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0\" + BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\" + BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0\"; + BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\"; + BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth0\" + BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\" BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\" $OPENAIRCN_DIR/SCRIPTS/build_epc -c -l @@ -2833,12 +2723,12 @@ BUILD/EPC/epc.conf.in MCC \"208\" BUILD/EPC/epc.conf.in MNC \"92\" BUILD/EPC/epc.conf.in TAC \"1\" - BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0:1\" - BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.170.0.1/24\" - BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0:2\"; - BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.170.1.1/24\"; - BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" - BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0\" + BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\" + BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0\"; + BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\"; + BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth0\" + BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\" BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\" $OPENAIRCN_DIR/SCRIPTS/build_epc -c -l @@ -3036,11 +2926,11 @@ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf frame_type \"FDD\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf nb_antennas_rx 1 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.remote.conf ENB_PORT_FOR_S1U 2152 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_PORT_FOR_S1U 2152 $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail @@ -3330,6 +3220,494 @@ + + lte-softmodem + + mozart + stevens + nano + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf N_RB_DL 25 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + sleep 15; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf -W + + + + + False + + /tmp + + + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2 + + + + False + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + + /tmp + BUILD/EPC/epc.conf.in MCC \"208\" + BUILD/EPC/epc.conf.in MNC \"92\" + BUILD/EPC/epc.conf.in TAC \"1\" + BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0\" + BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\" + BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0\"; + BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\"; + BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth0\" + BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\" + BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\" + $OPENAIRCN_DIR/SCRIPTS/build_epc + -c -l + $OPENAIRCN_DIR/SCRIPTS/build_hss + -c -l + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ; sudo -E ifconfig eth1 add 192.172.0.1 + + $OPENAIRCN_DIR/SCRIPTS/run_epc + -r + sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1 + + throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec + + False + USRPx310.OAI_EPC_remote.Bandrich.5MHz.FDD.Band_7.UL.1TX.1RX + 10 + + + + + + lte-softmodem + + mozart + stevens + nano + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf N_RB_DL 50 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + sleep 15; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf -W + + + + + True + + /tmp + + + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2 + + + + False + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + + /tmp + BUILD/EPC/epc.conf.in MCC \"208\" + BUILD/EPC/epc.conf.in MNC \"92\" + BUILD/EPC/epc.conf.in TAC \"1\" + BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0\" + BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\" + BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0\"; + BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\"; + BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth0\" + BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\" + BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\" + $OPENAIRCN_DIR/SCRIPTS/build_epc + -c -l + $OPENAIRCN_DIR/SCRIPTS/build_hss + -c -l + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth1 add 192.172.0.1 + + $OPENAIRCN_DIR/SCRIPTS/run_epc + -r + sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1 + + throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec + + False + USRPx310.OAI_EPC_remote.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX + 10 + + + + lte-softmodem + + mozart + stevens + nano + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf N_RB_DL 100 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + sleep 15; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf -W + + + + + False + + /tmp + + + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2 + + + + False + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + + /tmp + BUILD/EPC/epc.conf.in MCC \"208\" + BUILD/EPC/epc.conf.in MNC \"92\" + BUILD/EPC/epc.conf.in TAC \"1\" + BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0\" + BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\" + BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0\"; + BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\"; + BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth0\" + BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\" + BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\" + $OPENAIRCN_DIR/SCRIPTS/build_epc + -c -l + $OPENAIRCN_DIR/SCRIPTS/build_hss + -c -l + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ; sudo -E ifconfig eth1 add 192.172.0.1 + + $OPENAIRCN_DIR/SCRIPTS/run_epc + -r + sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1 + + throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec + + False + USRPx310.OAI_EPC_remote.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX + 10 + + + + lte-softmodem + + mozart + stevens + nano + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf N_RB_DL 25 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + sleep 15; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf -W + + + + + False + + /tmp + + + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2 + + throughput_test min=10.0Mbits/sec max=10.5Mbits/sec average=11.0Mbits/sec + + False + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + + /tmp + BUILD/EPC/epc.conf.in MCC \"208\" + BUILD/EPC/epc.conf.in MNC \"92\" + BUILD/EPC/epc.conf.in TAC \"1\" + BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0\" + BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\" + BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0\"; + BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\"; + BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth0\" + BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\" + BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\" + $OPENAIRCN_DIR/SCRIPTS/build_epc + -c -l + $OPENAIRCN_DIR/SCRIPTS/build_hss + -c -l + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth1 add 192.172.0.1 + + $OPENAIRCN_DIR/SCRIPTS/run_epc + -r + sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1 + + + + False + USRPx310.OAI_EPC_remote.Bandrich.5MHz.FDD.Band_7.DL.1TX.1RX + 10 + + + + lte-softmodem + + mozart + stevens + nano + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf N_RB_DL 50 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + sleep 15; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail + sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf -W + + + + + False + + /tmp + + + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2 + + throughput_test min=20.0Mbits/sec max=21.0Mbits/sec average=22.0Mbits/sec + + False + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + + /tmp + BUILD/EPC/epc.conf.in MCC \"208\" + BUILD/EPC/epc.conf.in MNC \"92\" + BUILD/EPC/epc.conf.in TAC \"1\" + BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0\" + BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\" + BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0\"; + BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\"; + BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth0\" + BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\" + BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\" + $OPENAIRCN_DIR/SCRIPTS/build_epc + -c -l + $OPENAIRCN_DIR/SCRIPTS/build_hss + -c -l + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth1 add 192.172.0.1 + + $OPENAIRCN_DIR/SCRIPTS/run_epc + -r + sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1 + + + + False + USRPx310.OAI_EPC_remote.Bandrich.10MHz.FDD.Band_7.DL.1TX.1RX + 10 + + + + lte-softmodem + + mozart + stevens + nano + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf N_RB_DL 100 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + sleep 15; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf -W + + + + + True + + /tmp + + + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2 + + throughput_test min=20.0Mbits/sec max=21.0Mbits/sec average=22.0Mbits/sec + + False + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + + /tmp + BUILD/EPC/epc.conf.in MCC \"208\" + BUILD/EPC/epc.conf.in MNC \"92\" + BUILD/EPC/epc.conf.in TAC \"1\" + BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0\" + BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\" + BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0\"; + BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\"; + BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth0\" + BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\" + BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\" + $OPENAIRCN_DIR/SCRIPTS/build_epc + -c -l + $OPENAIRCN_DIR/SCRIPTS/build_hss + -c -l + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth1 add 192.172.0.1 + + $OPENAIRCN_DIR/SCRIPTS/run_epc + -r + sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1 + + + + False + USRPx310.OAI_EPC_remote.Bandrich.20MHz.FDD.Band_7.DL.1TX.1RX + 10 + + lte-softmodem @@ -3797,6 +4175,498 @@ + + + lte-softmodem + + calisson + stevens + nano + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 25 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w EXMIMO -x -c + sleep 15; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2; dmesg|tail + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W + + + + + False + + + /tmp + + + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2 + + + + False + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + + /tmp + BUILD/EPC/epc.conf.in MCC \"208\" + BUILD/EPC/epc.conf.in MNC \"92\" + BUILD/EPC/epc.conf.in TAC \"1\" + BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0\" + BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\" + BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0\"; + BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\"; + BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth0\" + BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\" + BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\" + $OPENAIRCN_DIR/SCRIPTS/build_epc + -c -l + $OPENAIRCN_DIR/SCRIPTS/build_hss + -c -l + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ; sudo -E ifconfig eth1 add 192.172.0.1 + + $OPENAIRCN_DIR/SCRIPTS/run_epc + -r + sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1 + + throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec + + False + EXMIMO.OAI_EPC_remote.Bandrich.5MHz.FDD.Band_7.UL.1TX.1RX + 10 + + + + + + lte-softmodem + + calisson + stevens + nano + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 50 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w EXMIMO -x -c + sleep 15; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W + + + + + False + + /tmp + + + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2 + + + + False + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + + /tmp + BUILD/EPC/epc.conf.in MCC \"208\" + BUILD/EPC/epc.conf.in MNC \"92\" + BUILD/EPC/epc.conf.in TAC \"1\" + BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0\" + BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\" + BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0\"; + BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\"; + BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth0\" + BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\" + BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\" + $OPENAIRCN_DIR/SCRIPTS/build_epc + -c -l + $OPENAIRCN_DIR/SCRIPTS/build_hss + -c -l + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth1 add 192.172.0.1 + + $OPENAIRCN_DIR/SCRIPTS/run_epc + -r + sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1 + + throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec + + False + EXMIMO.OAI_EPC_remote.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX + 10 + + + + lte-softmodem + + calisson + stevens + nano + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 100 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w EXMIMO -x -c + sleep 15; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W + + + + + False + + /tmp + + + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2 + + + + False + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + + /tmp + BUILD/EPC/epc.conf.in MCC \"208\" + BUILD/EPC/epc.conf.in MNC \"92\" + BUILD/EPC/epc.conf.in TAC \"1\" + BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0\" + BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\" + BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0\"; + BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\"; + BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth0\" + BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\" + BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\" + $OPENAIRCN_DIR/SCRIPTS/build_epc + -c -l + $OPENAIRCN_DIR/SCRIPTS/build_hss + -c -l + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ; sudo -E ifconfig eth1 add 192.172.0.1 + + $OPENAIRCN_DIR/SCRIPTS/run_epc + -r + sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1 + + throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec + + False + EXMIMO.OAI_EPC_remote.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX + 10 + + + + lte-softmodem + + calisson + stevens + nano + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 25 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w EXMIMO -x -c + sleep 15; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W + + + + + False> + + /tmp + + + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2 + + throughput_test min=10.0Mbits/sec max=10.5Mbits/sec average=11.0Mbits/sec + + False + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + + /tmp + BUILD/EPC/epc.conf.in MCC \"208\" + BUILD/EPC/epc.conf.in MNC \"92\" + BUILD/EPC/epc.conf.in TAC \"1\" + BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0\" + BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\" + BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0\"; + BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\"; + BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth0\" + BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\" + BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\" + $OPENAIRCN_DIR/SCRIPTS/build_epc + -c -l + $OPENAIRCN_DIR/SCRIPTS/build_hss + -c -l + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth1 add 192.172.0.1 + + $OPENAIRCN_DIR/SCRIPTS/run_epc + -r + sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1 + + + + False + EXMIMO.OAI_EPC_remote.Bandrich.5MHz.FDD.Band_7.DL.1TX.1RX + 10 + + + + lte-softmodem + + calisson + stevens + nano + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 50 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w EXMIMO -x -c + sleep 15; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W + + + + + False + + /tmp + + + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2 + + throughput_test min=20.0Mbits/sec max=21.0Mbits/sec average=22.0Mbits/sec + + False + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + + /tmp + BUILD/EPC/epc.conf.in MCC \"208\" + BUILD/EPC/epc.conf.in MNC \"92\" + BUILD/EPC/epc.conf.in TAC \"1\" + BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0\" + BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\" + BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0\"; + BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\"; + BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth0\" + BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\" + BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\" + $OPENAIRCN_DIR/SCRIPTS/build_epc + -c -l + $OPENAIRCN_DIR/SCRIPTS/build_hss + -c -l + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth1 add 192.172.0.1 + + $OPENAIRCN_DIR/SCRIPTS/run_epc + -r + sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1 + + + + False + EXMIMO.OAI_EPC_remote.Bandrich.10MHz.FDD.Band_7.DL.1TX.1RX + 10 + + + + lte-softmodem + + calisson + stevens + nano + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 100 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w EXMIMO -x -c + sleep 15; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W + + + + + False + + /tmp + + + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2 + + throughput_test min=20.0Mbits/sec max=21.0Mbits/sec average=22.0Mbits/sec + + False + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + + /tmp + BUILD/EPC/epc.conf.in MCC \"208\" + BUILD/EPC/epc.conf.in MNC \"92\" + BUILD/EPC/epc.conf.in TAC \"1\" + BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0\" + BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\" + BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0\"; + BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\"; + BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth0\" + BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\" + BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\" + $OPENAIRCN_DIR/SCRIPTS/build_epc + -c -l + $OPENAIRCN_DIR/SCRIPTS/build_hss + -c -l + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth1 add 192.172.0.1 + + $OPENAIRCN_DIR/SCRIPTS/run_epc + -r + sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1 + + + + False + EXMIMO.OAI_EPC_remote.Bandrich.20MHz.FDD.Band_7.DL.1TX.1RX + 10 + + + + diff --git a/targets/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp b/targets/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp index 290f83ad5c..71c12e63dc 100644 --- a/targets/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp +++ b/targets/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp @@ -482,6 +482,7 @@ int openair0_dev_init_usrp(openair0_device* device, openair0_config_t *openair0_ } else { printf("Found USRP B200"); + args += ",num_recv_frames=256" ; s->usrp = uhd::usrp::multi_usrp::make(args); // s->usrp->set_rx_subdev_spec(rx_subdev);