maki/openairinterface5g
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Merge remote-tracking branch 'fjt_dev/develop_SA_L3' into NR_SA_itti_sim_wk48

Browse Source
This commit is contained in:
yoshio.inoue
2021-01-20 10:36:15 +00:00
parent 1d414412a0 e4ff0d5b31
commit 6bd2aab1f5
102 changed files with 3365 additions and 1658 deletions
Download Patch File Download Diff File Expand all files Collapse all files
doc/FEATURE_SET.md
+10 -6
View File
@@ -295,6 +295,7 @@ The following features are valid for the gNB and the 5G-NR UE.
- NR RRC (38.331) Rel 15 messages using new asn1c
- LTE RRC (36.331) also updated to Rel 15
- Generation of CellGroupConfig (for eNB) and MIB
- Generation of system information block 1 (SIB1)
- Application to read configuration file and program gNB RRC
- RRC can configure PDCP, RLC, MAC
@@ -305,7 +306,8 @@ The following features are valid for the gNB and the 5G-NR UE.
**gNB MAC**
- MAC -> PHY configuration using NR FAPI P5 interface
- MAC <-> PHY data interface using FAPI P7 interface for BCH PDU, DCI PDU, PDSCH PDU
- Scheduler for RA procedreat gNB
- Scheduler procedures for SIB1
- Scheduler procedures for RA
- MAC downlink scheduler (fixed allocations)
- MAC header generation (including timing advance)
- ACK / NACK handling and HARQ procedures for downlink
@@ -350,11 +352,13 @@ The following features are valid for the gNB and the 5G-NR UE.
## UE Higher Layers ##
**gNB MAC**
- Initial sync and MIB detection
- MAC -> PHY configuration of PHY via UE FAPI P5 interface
- Basic MAC to control PHY via UE FAPI P7 interface
- Random access procedure
**UE MAC**
* Minimum system information (MSI)
- Initial sync and MIB detection
- System information block 1 (SIB1) reception
* MAC -> PHY configuration of PHY via UE FAPI P5 interface
* Basic MAC to control PHY via UE FAPI P7 interface
* Random access procedure
**RLC**
doc/RUNMODEM.md
+34
View File
@@ -132,6 +132,40 @@ With the RF simulator (on the same machine):
`sudo RFSIMULATOR=127.0.0.1 ./nr-uesoftmodem --do-ra --rfsim --parallel-config PARALLEL_SINGLE_THREAD`
## sa setup with OAI
The sa flag is used to run gNB in standalone mode. Currently OAI in NR standalone mode transmits and receives SIB1.
In order to run gNB in standalone mode, the following flag is needed at gNB:
`--sa`
### Run OAI in sa mode
At the gNB the --sa flag does the following
- it reads the RRC configuration from the configuration file
- it encodes the RRCConfiguration and the RBconfig message and stores them in the binary files rbconfig.raw and reconfig.raw
- the RRC encodes SIB1 according the configuration file and transmits it through PDSCH
At the UE the --sa flag will
- read the binary files rbconfig.raw and reconfig.raw from the current directory (a different directory can be specified with the flag --rrc_config_path) and process them.
From the `cmake_targets/ran_build/build` folder:
gNB on machine 1:
`sudo ./nr-softmodem -O ../../../targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.106PRB.usrpb210.conf --sa`
UE on machine 2:
`sudo ./nr-uesoftmodem --rrc_config_path . --sa`
With the RF simulator (on the same machine):
`sudo ./nr-softmodem -O ../../../targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.106PRB.usrpb210.conf --rfsim --sa`
`sudo ./nr-uesoftmodem --rrc_config_path . --rfsim --sa`
## IF setup with OAI
The -C and -CO flags can be used together at UE side to set custom downlink and uplink FR1 intermediate frequencies for the IF equipment.