diff --git a/cmake_targets/CMakeLists.txt b/cmake_targets/CMakeLists.txt
index 97811fd172..08e207f3a4 100644
--- a/cmake_targets/CMakeLists.txt
+++ b/cmake_targets/CMakeLists.txt
@@ -132,16 +132,19 @@ Message("Architecture is ${CMAKE_SYSTEM_PROCESSOR}")
if (CMAKE_SYSTEM_PROCESSOR STREQUAL "armv7l")
set(C_FLAGS_PROCESSOR "-gdwarf-2 -mfloat-abi=hard -mfpu=neon -lgcc -lrt")
else (CMAKE_SYSTEM_PROCESSOR STREQUAL "armv7l")
- file(STRINGS "/proc/cpuinfo" CPUINFO REGEX flags LIMIT_COUNT 1)
- #Message("CPUINFO is ${CPUINFO}")
- if (CPUINFO MATCHES "avx2")
- set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -mavx2")
- endif()
- if (CPUINFO MATCHES "sse4_1")
- set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -msse4.1")
- endif()
- if (CPUINFO MATCHES "ssse3")
- set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -mssse3")
+ if(EXISTS "/proc/cpuinfo")
+ file(STRINGS "/proc/cpuinfo" CPUINFO REGEX flags LIMIT_COUNT 1)
+ if (CPUINFO MATCHES "avx2")
+ set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -mavx2")
+ endif()
+ if (CPUINFO MATCHES "sse4_1")
+ set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -msse4.1")
+ endif()
+ if (CPUINFO MATCHES "ssse3")
+ set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -mssse3")
+ endif()
+ else()
+ Message("/proc/cpuinfo does not exit. We will use manual CPU flags")
endif()
endif()
@@ -151,7 +154,7 @@ Message("C_FLAGS_PROCESSOR is ${C_FLAGS_PROCESSOR}")
if (CMAKE_SYSTEM_PROCESSOR MATCHES "x86")
if ( (NOT( C_FLAGS_PROCESSOR MATCHES "ssse3")) OR (NOT( C_FLAGS_PROCESSOR MATCHES "msse4.1")) )
- Message(FATAL_ERROR "For x86 Architecture, you must have following flags: -mssse3 -msse4.1. The current detected flags are: ${C_FLAGS_PROCESSOR}. You can pass the flags manually in build script, for example: ./build_oai --cflags_processor \"-mssse3 -msse4.1\" ")
+ Message(FATAL_ERROR "For x86 Architecture, you must have following flags: -mssse3 -msse4.1. The current detected flags are: ${C_FLAGS_PROCESSOR}. You can pass the flags manually in build script, for example: ./build_oai --cflags_processor \"-mssse3 -msse4.1 -mavx2\" ")
endif()
endif()
diff --git a/cmake_targets/autotests/README.txt b/cmake_targets/autotests/README.txt
index 6e9cbbd581..3ae18133c7 100644
--- a/cmake_targets/autotests/README.txt
+++ b/cmake_targets/autotests/README.txt
@@ -205,6 +205,14 @@ Obj.# Case# Test# Description
01 85 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
01 85 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
+02 55 lte-softmodem tests with USRP B210 RF as eNB and ALU EPC w/ Sony Experia M4 COTS UE for TX/1RX
+02 55 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX
+02 55 01 Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX
+02 55 02 Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX
+02 55 03 Band 7 FDD 5MHz DL Throughput for 300 sec for 1TX/1RX
+02 55 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
+02 55 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
+
01 64 lte-softmodem-noS1 tests
diff --git a/cmake_targets/autotests/run_exec_autotests.bash b/cmake_targets/autotests/run_exec_autotests.bash
index 1029acc1e6..2d3f193b30 100755
--- a/cmake_targets/autotests/run_exec_autotests.bash
+++ b/cmake_targets/autotests/run_exec_autotests.bash
@@ -1,4 +1,34 @@
#!/bin/bash
+#******************************************************************************
+
+# OpenAirInterface
+# Copyright(c) 1999 - 2014 Eurecom
+
+# OpenAirInterface is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+
+# OpenAirInterface is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with OpenAirInterface.The full GNU General Public License is
+# included in this distribution in the file called "COPYING". If not,
+# see .
+
+# Contact Information
+# OpenAirInterface Admin: openair_admin@eurecom.fr
+# OpenAirInterface Tech : openair_tech@eurecom.fr
+# OpenAirInterface Dev : openair4g-devel@lists.eurecom.fr
+
+# Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
+
+# *******************************************************************************/
+# \author Navid Nikaein, Rohit Gupta
if [ -s $OPENAIR_DIR/cmake_targets/tools/build_helper ] ; then
source $OPENAIR_DIR/cmake_targets/tools/build_helper
@@ -111,6 +141,8 @@ function test_compile() {
compile_log_dir=`eval echo \"$OPENAIR_DIR/cmake_targets/log/\"`
echo "Removing compilation log files in $compile_log_dir"
rm -frv $compile_log_dir
+ echo "Executing $pre_exec_file $pre_exe_args ...."
+ eval $pre_exec_file $pre_exec_args
echo "Executing $compile_prog $compile_prog_args ...."
eval $compile_prog $compile_prog_args
echo "Copying compilation log files to test case log directory: $log_dir"
@@ -280,7 +312,7 @@ function test_compile_and_run() {
if [ -n "$pre_exec_file" ]; then
{ echo " Executing $pre_exec_file $pre_exec_args "
- eval " echo '$mypassword' |sudo -S -E $pre_exec_file $pre_exec_args " ; }>> $temp_exec_log 2>&1
+ eval " $pre_exec_file $pre_exec_args " ; }>> $temp_exec_log 2>&1
fi
echo "Executing $main_exec $main_exec_args_array_index "
@@ -503,6 +535,7 @@ for search_expr in "${test_case_array[@]}"
echo "search_expr_false = $search_expr_false"
echo "nruns = $nruns"
+
#eval $pre_exec
compile_prog_out=`eval echo \"$compile_prog_out\"`
diff --git a/cmake_targets/autotests/test_case_list.xml b/cmake_targets/autotests/test_case_list.xml
index c4b0fc75e6..eddc83c334 100644
--- a/cmake_targets/autotests/test_case_list.xml
+++ b/cmake_targets/autotests/test_case_list.xml
@@ -1,4 +1,4 @@
-
+
mozart calisson stevens nano amerique
/mnt/sradio/TEST_RESULTS/
@@ -6,11 +6,11 @@
https://gitlab.eurecom.fr/oai/openair-cn.git
develop
develop
- oaisim* oaisim_nos1* lte-softmodem* lte-softmodem-nos1* mme_gw* run_epc* run_hss* hss hss_sim configure_cots_bandrich_ue* wvdial* iperf iperf_script ping tshark rrh_gw
+ oaisim* oaisim_nos1* lte-softmodem* lte-softmodem-nos1* mme_gw* run_epc* run_hss* hss hss_sim configure_cots* wvdial* iperf iperf_script ping tshark rrh_gw
sudo -S -E /opt/ltebox/tools/stop_ltebox
$OPENAIR_DIR/cmake_targets/build_oai -w EXMIMO -c; sudo -S -E $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2; uname -a; dmesg|tail
36000
- 0102+ 010304 010305 0104+ 015502 015505 015506 015507 015508 015509 015510 015511 015602 015605 015702 015705 015802 015805 016502 016505 0170+ 017502 017505 018002 018005 018502 018505
+ 0102+ 010304 010305 0104+ 015502 015505 015506 015507 015508 015509 015510 015511 015602 015605 015702 015705 015802 015805 016102 016105 016502 016505 0170+ 017502 017505 018002 018005 018502 018505 025502 025505
3
mozart calisson stevens nano amerique
@@ -23,7 +23,7 @@
$OPENAIR_DIR/cmake_targets/at_commands/build/at_nas_ue
$OPENAIR_DIR/cmake_targets/nas_sim_tools/build/usim
$OPENAIR_DIR/cmake_targets/nas_sim_tools/build/nvram
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
@@ -43,7 +43,7 @@
$OPENAIR_DIR/cmake_targets/at_commands/build/at_nas_ue
$OPENAIR_DIR/cmake_targets/nas_sim_tools/build/usim
$OPENAIR_DIR/cmake_targets/nas_sim_tools/build/nvram
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
@@ -63,7 +63,7 @@
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/rb_tool
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/CMakeFiles/oai_nw_drv/oai_nw_drv.ko
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
@@ -83,7 +83,7 @@
$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/rb_tool
$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko
$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/liboai_usrpdevif.so
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
@@ -105,7 +105,7 @@
$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/CMakeFiles/openair_rf/openair_rf.ko
$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/updatefw
$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/oarf_config_exmimo.oct
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
@@ -125,7 +125,7 @@
$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/rb_tool
$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko
$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/liboai_bladerfdevif.so
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
@@ -145,7 +145,7 @@
$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/rb_tool
$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko
$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/liboai_eth_transpro.so
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
@@ -165,7 +165,7 @@
--eNB -w USRP -r Rel10 -c
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/liboai_usrpdevif.so
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
@@ -185,7 +185,7 @@
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/CMakeFiles/openair_rf/openair_rf.ko
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/updatefw
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/oarf_config_exmimo.oct
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
@@ -203,7 +203,7 @@
--eNB -w BLADERF -r Rel10 -c
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/liboai_bladerfdevif.so
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
@@ -221,7 +221,7 @@
--eNB -w None -t ETHERNET -r Rel10 -c
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/liboai_eth_transpro.so
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
@@ -254,7 +254,7 @@
$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_kdf
$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_aes128_cmac_encrypt
$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eia2
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
@@ -274,7 +274,7 @@
$OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw
$OPENAIR_DIR/cmake_targets/rrh_gw/build/liboai_usrpdevif.so
$OPENAIR_DIR/cmake_targets/rrh_gw/build/liboai_eth_transpro.so
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
@@ -296,7 +296,7 @@
$OPENAIR_DIR/cmake_targets/rrh_gw/build/oarf_config_exmimo.oct
$OPENAIR_DIR/cmake_targets/rrh_gw/build/liboai_exmimodevif.so
$OPENAIR_DIR/cmake_targets/rrh_gw/build/liboai_eth_transpro.so
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
@@ -315,7 +315,7 @@
$OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw
$OPENAIR_DIR/cmake_targets/rrh_gw/build/liboai_bladerfdevif.so
$OPENAIR_DIR/cmake_targets/rrh_gw/build/liboai_eth_transpro.so
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
@@ -332,7 +332,7 @@
cp -vf $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band38.generic.oaisim.local_no_mme.conf $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf
$OPENAIR_DIR/cmake_targets/build_oai
--oaisim --noS1 -c
- $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
@@ -355,7 +355,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--oaisim --noS1 -c
- $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
-O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 1 -a -s15
@@ -377,7 +377,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--oaisim --noS1 -c
- $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
-O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 1 -s15
@@ -399,7 +399,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--oaisim --noS1 -c
- $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
-O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 1 -a -s15
@@ -420,7 +420,7 @@
cp -vf $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band38.generic.oaisim.local_no_mme.conf $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf
$OPENAIR_DIR/cmake_targets/build_oai
--oaisim --noS1 -c
- $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
@@ -442,7 +442,7 @@
cp -vf $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band38.generic.oaisim.local_no_mme.conf $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf
$OPENAIR_DIR/cmake_targets/build_oai
--oaisim --noS1 -c
- $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
@@ -464,7 +464,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--oaisim --noS1 -c
- $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 1 -F -s15
@@ -485,7 +485,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--oaisim --noS1 -c
- $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 1 -F -a -s15
@@ -506,7 +506,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--oaisim --noS1 -c
- $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 1 -F -s15
@@ -527,7 +527,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--oaisim --noS1 -c
- $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 1 -F -a -s15
@@ -548,7 +548,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--oaisim --noS1 -c
- $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 1 -F -c26
@@ -569,7 +569,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--oaisim --noS1 -c
- $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 1 -F -c26 -a
@@ -590,7 +590,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--oaisim --noS1 -c
- $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -l7 -x 1 -Q3 -n 100 -b1 -u1
@@ -606,7 +606,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--oaisim --noS1 -c
- $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -l7 -x 1 -T mscbr -Q3 -n 100 -b1 -u1
@@ -622,7 +622,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--oaisim --noS1 -c
- $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -l7 -F -T mscbr -x 1 -Q3 -n 100 -b1 -u1
@@ -638,7 +638,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--oaisim --noS1 -c
- $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -l7 -c43 -F -T mbvbr -Q4 -j1 -n120
@@ -654,7 +654,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--core_simulators -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_aes128_cmac_encrypt
--verbose
@@ -670,7 +670,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--core_simulators -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_aes128_ctr_decrypt
--verbose
@@ -686,7 +686,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--core_simulators -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_aes128_ctr_encrypt
--verbose
@@ -702,7 +702,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--core_simulators -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_kenb
--verbose
@@ -718,7 +718,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--core_simulators -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas
--verbose
@@ -734,7 +734,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--core_simulators -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eea1
--verbose
@@ -750,7 +750,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--core_simulators -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eea2
--verbose
@@ -766,7 +766,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--core_simulators -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eia1
--verbose
@@ -782,7 +782,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--core_simulators -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eia1
--verbose
@@ -798,7 +798,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--core_simulators -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_kdf
--verbose
@@ -825,7 +825,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--phy_simulators -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte-simulators/build/dlsim
-m5 -gF -s-1 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O70 -L
@@ -856,7 +856,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--phy_simulators -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte-simulators/build/ulsim
-B25 -m5 -y1 -gN -x1 -s6 -w1.0 -e.1 -P -n500 -O70 -L
@@ -898,7 +898,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
@@ -912,7 +912,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -930,7 +930,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -973,7 +973,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
@@ -987,7 +987,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -1005,7 +1005,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -1047,7 +1047,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
@@ -1061,7 +1061,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -1079,7 +1079,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -1121,7 +1121,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
@@ -1135,7 +1135,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -1153,7 +1153,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -1194,7 +1194,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
@@ -1207,7 +1207,7 @@
/tmp
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -1226,7 +1226,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -1267,7 +1267,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
@@ -1281,7 +1281,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -1300,7 +1300,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -1342,7 +1342,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
@@ -1356,7 +1356,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue;$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -1374,7 +1374,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -1417,7 +1417,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
@@ -1430,7 +1430,7 @@
/tmp
>
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue;$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -1448,7 +1448,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -1490,7 +1490,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
@@ -1504,7 +1504,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -1522,7 +1522,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -1564,7 +1564,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
@@ -1578,7 +1578,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -1597,7 +1597,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -1638,7 +1638,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
@@ -1652,7 +1652,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -1671,7 +1671,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -1712,7 +1712,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
@@ -1726,7 +1726,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -1745,7 +1745,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -1788,7 +1788,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -c
- sleep 15; sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ; sudo -E ifconfig eth5:3 192.170.0.2 up ; sudo -E ifconfig eth5:4 192.170.1.2 up; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E ifconfig eth5:3 192.170.0.2 up ; sudo -E ifconfig eth5:4 192.170.1.2 up; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W
@@ -1802,7 +1802,7 @@
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -1829,7 +1829,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ; sudo -E ifconfig eth5 add 192.172.0.1
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E ifconfig eth5 add 192.172.0.1
$OPENAIRCN_DIR/SCRIPTS/run_epc
-i -r
@@ -1872,7 +1872,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -c
- sleep 15; sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth5:3 192.170.0.2 up ; sudo -E ifconfig eth5:4 192.170.1.2 up; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth5:3 192.170.0.2 up ; sudo -E ifconfig eth5:4 192.170.1.2 up; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W
@@ -1886,7 +1886,7 @@
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -1913,7 +1913,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth5 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth5 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
$OPENAIRCN_DIR/SCRIPTS/run_epc
-i -r
@@ -1956,7 +1956,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -c
- sleep 15; sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth5:3 192.170.0.2 up ; sudo -E ifconfig eth5:4 192.170.1.2 up; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth5:3 192.170.0.2 up ; sudo -E ifconfig eth5:4 192.170.1.2 up; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W
@@ -1970,7 +1970,7 @@
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -1997,7 +1997,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ; sudo -E ifconfig eth5 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E ifconfig eth5 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
$OPENAIRCN_DIR/SCRIPTS/run_epc
-i -r
@@ -2040,7 +2040,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -c
- sleep 15; sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth5:3 192.170.0.2 up ; sudo -E ifconfig eth5:4 192.170.1.2 up; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth5:3 192.170.0.2 up ; sudo -E ifconfig eth5:4 192.170.1.2 up; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W
@@ -2054,7 +2054,7 @@
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -2081,7 +2081,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth5 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth5 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
$OPENAIRCN_DIR/SCRIPTS/run_epc
-i -r
@@ -2124,7 +2124,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -c
- sleep 15; sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth5:3 192.170.0.2 up ; sudo -E ifconfig eth5:4 192.170.1.2 up; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth5:3 192.170.0.2 up ; sudo -E ifconfig eth5:4 192.170.1.2 up; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W
@@ -2138,7 +2138,7 @@
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -2165,7 +2165,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth5 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth5 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
$OPENAIRCN_DIR/SCRIPTS/run_epc
-i -r
@@ -2208,7 +2208,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -c
- sleep 15; sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth5:3 192.170.0.2 up ; sudo -E ifconfig eth5:4 192.170.1.2 up; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth5:3 192.170.0.2 up ; sudo -E ifconfig eth5:4 192.170.1.2 up; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W
@@ -2222,7 +2222,7 @@
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -2249,7 +2249,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth5 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth5 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
$OPENAIRCN_DIR/SCRIPTS/run_epc
-i -r
@@ -2292,7 +2292,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -c
- sleep 15; sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
@@ -2306,7 +2306,7 @@
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -2334,7 +2334,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ; sudo -E ifconfig eth0 add 192.172.0.1
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E ifconfig eth0 add 192.172.0.1
$OPENAIRCN_DIR/SCRIPTS/run_epc
-r
@@ -2377,7 +2377,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -c
- sleep 15; sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
@@ -2391,7 +2391,7 @@
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -2418,7 +2418,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth0 add 192.172.0.1; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth0 add 192.172.0.1; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
$OPENAIRCN_DIR/SCRIPTS/run_epc
-r
@@ -2461,7 +2461,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -c
- sleep 15; sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth0:3 192.170.0.2 up ; sudo -E ifconfig eth0:4 192.170.1.2 up; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth0:3 192.170.0.2 up ; sudo -E ifconfig eth0:4 192.170.1.2 up; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
@@ -2475,7 +2475,7 @@
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -2502,7 +2502,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ; sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
$OPENAIRCN_DIR/SCRIPTS/run_epc
-r
@@ -2545,7 +2545,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -c
- sleep 15; sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
@@ -2559,7 +2559,7 @@
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -2586,7 +2586,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
$OPENAIRCN_DIR/SCRIPTS/run_epc
-r
@@ -2629,7 +2629,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -c
- sleep 15; sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
@@ -2643,7 +2643,7 @@
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -2670,7 +2670,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
$OPENAIRCN_DIR/SCRIPTS/run_epc
-r
@@ -2713,7 +2713,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -c
- sleep 15; sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
@@ -2727,7 +2727,7 @@
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -2754,7 +2754,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth0 add 192.172.0.1 ;cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth0 add 192.172.0.1 ;cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
$OPENAIRCN_DIR/SCRIPTS/run_epc
-r
@@ -2795,7 +2795,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
- sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf -W
@@ -2808,7 +2808,7 @@
/tmp
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -2826,7 +2826,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -2867,7 +2867,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
- sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf -W
@@ -2880,7 +2880,7 @@
/tmp
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -2898,7 +2898,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -2938,7 +2938,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
- sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf -W
@@ -2952,7 +2952,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -2970,7 +2970,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -3010,7 +3010,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
- sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf -W
@@ -3024,7 +3024,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -3042,7 +3042,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -3081,7 +3081,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
- sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail
sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf -W
@@ -3095,7 +3095,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -3113,7 +3113,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -3166,7 +3166,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -3184,7 +3184,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -3226,7 +3226,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
- sleep 15; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf -W
@@ -3240,7 +3240,7 @@
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -3267,7 +3267,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ; sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
$OPENAIRCN_DIR/SCRIPTS/run_epc
-r
@@ -3309,7 +3309,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
- sleep 15; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf -W
@@ -3323,7 +3323,7 @@
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -3350,7 +3350,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
$OPENAIRCN_DIR/SCRIPTS/run_epc
-r
@@ -3390,7 +3390,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
- sleep 15; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf -W
@@ -3404,7 +3404,7 @@
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -3431,7 +3431,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ; sudo -E ifconfig eth0 add 192.172.0.1
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E ifconfig eth0 add 192.172.0.1
$OPENAIRCN_DIR/SCRIPTS/run_epc
-r
@@ -3471,7 +3471,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
- sleep 15; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf -W
@@ -3485,7 +3485,7 @@
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -3512,7 +3512,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
$OPENAIRCN_DIR/SCRIPTS/run_epc
-r
@@ -3552,7 +3552,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
- sleep 15; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15;$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf -W
@@ -3566,7 +3566,7 @@
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -3593,7 +3593,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf
$OPENAIRCN_DIR/SCRIPTS/run_epc
-r
@@ -3633,7 +3633,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
- sleep 15; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf $OPENAIR_TESTDIR/enb.conf
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf -W
@@ -3647,7 +3647,7 @@
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -3674,7 +3674,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
$OPENAIRCN_DIR/SCRIPTS/run_epc
-r
@@ -3714,7 +3714,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w EXMIMO -x -c
- sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2; dmesg|tail
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2; dmesg|tail
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W
@@ -3727,7 +3727,7 @@
/tmp
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -3745,7 +3745,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -3786,7 +3786,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w EXMIMO -x -c
- sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W
@@ -3800,7 +3800,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -3818,7 +3818,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -3858,7 +3858,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w EXMIMO -x -c
- sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W
@@ -3872,7 +3872,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -3890,7 +3890,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -3930,7 +3930,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w EXMIMO -x -c
- sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W
@@ -3944,7 +3944,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -3962,7 +3962,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -4001,7 +4001,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w EXMIMO -x -c
- sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W
@@ -4015,7 +4015,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -4033,7 +4033,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -4072,7 +4072,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w EXMIMO -x -c
- sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W
@@ -4086,7 +4086,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -4104,7 +4104,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -4145,7 +4145,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w EXMIMO -x -c
- sleep 15; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15;$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf $OPENAIR_TESTDIR/enb.conf
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W
@@ -4160,7 +4160,7 @@
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -4187,7 +4187,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ; sudo -E ifconfig eth0 add 192.172.0.1 ;cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E ifconfig eth0 add 192.172.0.1 ;cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
$OPENAIRCN_DIR/SCRIPTS/run_epc
-r
@@ -4229,7 +4229,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w EXMIMO -x -c
- sleep 15; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf $OPENAIR_TESTDIR/enb.conf
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W
@@ -4243,7 +4243,7 @@
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -4270,7 +4270,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
$OPENAIRCN_DIR/SCRIPTS/run_epc
-r
@@ -4310,7 +4310,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w EXMIMO -x -c
- sleep 15; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15;$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf $OPENAIR_TESTDIR/enb.conf
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W
@@ -4324,7 +4324,7 @@
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -4351,7 +4351,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ; sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
$OPENAIRCN_DIR/SCRIPTS/run_epc
-r
@@ -4391,7 +4391,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w EXMIMO -x -c
- sleep 15; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15;$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf $OPENAIR_TESTDIR/enb.conf
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W
@@ -4405,7 +4405,7 @@
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -4432,7 +4432,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth0 add 192.172.0.1 ;cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth0 add 192.172.0.1 ;cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
$OPENAIRCN_DIR/SCRIPTS/run_epc
-r
@@ -4472,7 +4472,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w EXMIMO -x -c
- sleep 15; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15;$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf $OPENAIR_TESTDIR/enb.conf
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W
@@ -4486,7 +4486,7 @@
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -4513,7 +4513,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in
$OPENAIRCN_DIR/SCRIPTS/run_epc
-r
@@ -4553,7 +4553,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w EXMIMO -x -c
- sleep 15; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf $OPENAIR_TESTDIR/enb.conf
+ sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf $OPENAIR_TESTDIR/enb.conf
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W
@@ -4567,7 +4567,7 @@
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -4594,7 +4594,7 @@
$OPENAIRCN_DIR/SCRIPTS/build_hss
-c -l --debug --random false
- sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth0 add 192.172.0.1
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth0 add 192.172.0.1
$OPENAIRCN_DIR/SCRIPTS/run_epc
-r
@@ -4638,7 +4638,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w BLADERF -x -c
- sudo -E $OPENAIR_DIR/cmake_targets/tools/start_bladerf.py
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E $OPENAIR_DIR/cmake_targets/tools/start_bladerf.py
sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf -W
@@ -4652,7 +4652,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -4670,7 +4670,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -4714,7 +4714,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w BLADERF -x -c
- sudo -E $OPENAIR_DIR/cmake_targets/tools/start_bladerf.py
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E $OPENAIR_DIR/cmake_targets/tools/start_bladerf.py
sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf -W
@@ -4728,7 +4728,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -4746,7 +4746,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -4789,7 +4789,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w BLADERF -x -c
- sudo -E $OPENAIR_DIR/cmake_targets/tools/start_bladerf.py
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E $OPENAIR_DIR/cmake_targets/tools/start_bladerf.py
sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf -W
@@ -4803,7 +4803,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -4821,7 +4821,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -4864,7 +4864,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w BLADERF -x -c
- sudo -E $OPENAIR_DIR/cmake_targets/tools/start_bladerf.py
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E $OPENAIR_DIR/cmake_targets/tools/start_bladerf.py
sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf -W
@@ -4878,7 +4878,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -4896,7 +4896,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -4938,7 +4938,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w BLADERF -x -c
- sudo -E $OPENAIR_DIR/cmake_targets/tools/start_bladerf.py
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E $OPENAIR_DIR/cmake_targets/tools/start_bladerf.py
sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf -W
@@ -4951,7 +4951,7 @@
/tmp
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -4970,7 +4970,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -5012,7 +5012,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w BLADERF -x -c
- sudo -E $OPENAIR_DIR/cmake_targets/tools/start_bladerf.py
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E $OPENAIR_DIR/cmake_targets/tools/start_bladerf.py
sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf -W
@@ -5026,7 +5026,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -5045,7 +5045,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -5087,7 +5087,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w LMSSDR -x -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf -W
@@ -5101,7 +5101,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -5119,7 +5119,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -5163,7 +5163,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w LMSSDR -x -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf -W
@@ -5177,7 +5177,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -5195,7 +5195,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -5238,7 +5238,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w LMSSDR -x -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf -W
@@ -5252,7 +5252,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -5270,7 +5270,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -5313,7 +5313,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w LMSSDR -x -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf -W
@@ -5327,7 +5327,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -5345,7 +5345,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -5387,7 +5387,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w LMSSDR -x -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf -W
@@ -5400,7 +5400,7 @@
/tmp
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -5419,7 +5419,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -5461,7 +5461,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w LMSSDR -x -c
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf -W
@@ -5475,7 +5475,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -5494,7 +5494,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -5538,7 +5538,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf rrh_gw_config "local_if_name=\"eth0\";remote_address=\"10:60:4b:75:80:83\";local_address=\"98:90:96:df:66:07\";local_port=50000;remote_port=50000;tr_preference=\"raw\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=70;tx_scheduling_advance=9;rrh_gw_active=\"yes\";"
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w None -t ETHERNET -x -c --disable-deadline
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
sleep 5; sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf -W
@@ -5550,7 +5550,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--RRH -w USRP -t ETHERNET -c --disable-deadline
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw
-n1 -x -m1 -i eth1
@@ -5562,7 +5562,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -5580,7 +5580,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -5626,7 +5626,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf rrh_gw_config "local_if_name=\"eth0\";remote_address=\"10:60:4b:75:80:83\";local_address=\"98:90:96:df:66:07\";local_port=50000;remote_port=50000;tr_preference=\"raw\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=113;tx_scheduling_advance=9;rrh_gw_active=\"yes\";"
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w None -t ETHERNET -x -c --disable-deadline
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
sleep 5; sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf -W
@@ -5638,7 +5638,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--RRH -w USRP -t ETHERNET -c --disable-deadline
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw
-n1 -x -m1 -i eth1
@@ -5648,7 +5648,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -5666,7 +5666,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -5711,7 +5711,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf rrh_gw_config "local_if_name=\"eth0\";remote_address=\"10:60:4b:75:80:83\";local_address=\"98:90:96:df:66:07\";local_port=50000;remote_port=50000;tr_preference=\"raw\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=115;tx_scheduling_advance=11;rrh_gw_active=\"yes\";"
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w None -t ETHERNET -x -c --disable-deadline
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
sleep 5; sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf -W
@@ -5723,7 +5723,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--RRH -w USRP -t ETHERNET -c --disable-deadline
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw
-n1 -x -m1 -i eth1
@@ -5733,7 +5733,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -5751,7 +5751,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -5796,7 +5796,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf rrh_gw_config "local_if_name=\"eth0\";remote_address=\"10:60:4b:75:80:83\";local_address=\"98:90:96:df:66:07\";local_port=50000;remote_port=50000;tr_preference=\"raw\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=70;tx_scheduling_advance=9;rrh_gw_active=\"yes\";"
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w None -t ETHERNET -x -c --disable-deadline
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
sleep 5; sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf -W
@@ -5808,7 +5808,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--RRH -w USRP -t ETHERNET -c --disable-deadline
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw
-n1 -x -m1 -i eth1
@@ -5818,7 +5818,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -5836,7 +5836,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -5880,7 +5880,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf rrh_gw_config "local_if_name=\"eth0\";remote_address=\"10:60:4b:75:80:83\";local_address=\"98:90:96:df:66:07\";local_port=50000;remote_port=50000;tr_preference=\"raw\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=113;tx_scheduling_advance=9;rrh_gw_active=\"yes\";"
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w None -t ETHERNET -x -c --disable-deadline
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
sleep 5; sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf -W
@@ -5892,7 +5892,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--RRH -w USRP -t ETHERNET -c --disable-deadline
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw
-n1 -x -m1 -i eth1
@@ -5901,7 +5901,7 @@
/tmp
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -5920,7 +5920,7 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
@@ -5964,7 +5964,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf rrh_gw_config "local_if_name=\"eth0\";remote_address=\"10:60:4b:75:80:83\";local_address=\"98:90:96:df:66:07\";local_port=50000;remote_port=50000;tr_preference=\"raw\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=115;tx_scheduling_advance=11;rrh_gw_active=\"yes\";"
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w None -t ETHERNET -x -c --disable-deadline
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
sleep 5; $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
-O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf -W
@@ -5976,7 +5976,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
--RRH -w USRP -t ETHERNET -c --disable-deadline
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw
-n1 -x -m1 -i eth1
@@ -5986,13 +5986,13 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2
- throughput_test min=15.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec
+ throughput_test min=10.0Mbits/sec max=10.0Mbits/sec average=10.0Mbits/sec
False
sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
@@ -6005,13 +6005,13 @@
-
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000
- $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1
+ $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 15Mbits/s -B 192.172.0.1
False
@@ -6020,6 +6020,452 @@
+
+ lte-softmodem
+
+ calisson
+ stevens
+ amerique
+ 390
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 25
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
+
+ $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
+ -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
+
+
+
+
+ False
+
+ /tmp
+
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
+
+ sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2
+
+
+
+ False
+ sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue
+
+ /tmp
+
+
+
+
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
+
+ /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
+
+ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000
+
+ $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1
+
+ throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec
+
+ False
+ USRPb210.ALU_EPC.SonyExperiaM4.5MHz.FDD.Band_7.UL.1TX.1RX
+ 10
+
+
+
+
+ lte-softmodem
+
+ calisson
+ stevens
+ amerique
+ 390
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
+
+ $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
+ -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
+
+
+
+
+ False
+
+ /tmp
+
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
+
+ sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2
+
+
+
+ False
+ sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue
+
+ /tmp
+
+
+
+
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
+
+ /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
+
+ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000
+
+ $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1
+
+ throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec
+
+ False
+ USRPb210.ALU_EPC.SonyExperiaM4.10MHz.FDD.Band_7.UL.1TX.1RX
+ 10
+
+
+
+ lte-softmodem
+
+ calisson
+ stevens
+ amerique
+ 390
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 100
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
+
+ $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
+ -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
+
+
+
+
+ False
+
+ /tmp
+
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
+
+ sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2
+
+
+
+ False
+ sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue
+
+ /tmp
+
+
+
+
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
+
+ /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
+
+ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000
+
+ $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1
+
+ throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec
+
+ False
+ USRPb210.ALU_EPC.SonyExperiaM4.20MHz.FDD.Band_7.UL.1TX.1RX
+ 10
+
+
+
+ lte-softmodem
+
+ calisson
+ stevens
+ amerique
+ 390
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 25
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
+
+ $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
+ -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
+
+
+
+
+ False
+
+ /tmp
+
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
+
+ sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -s -i 1 -u -f m -B 192.172.0.2
+
+ throughput_test min=4.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec
+
+ False
+ sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue
+
+
+ /tmp
+
+
+
+
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
+
+ /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
+
+ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000
+
+ $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1
+
+
+ False
+ USRPb210.ALU_EPC.SonyExperiaM4.5MHz.FDD.Band_7.DL.1TX.1RX
+ 10
+
+
+
+ lte-softmodem
+
+ calisson
+ stevens
+ amerique
+ 390
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
+
+ $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
+ -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
+
+
+
+
+ False
+
+ /tmp
+
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
+
+ sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -s -i 1 -u -f m -B 192.172.0.2
+
+ throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec
+
+ False
+ sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue
+
+
+ /tmp
+
+
+
+
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
+
+ /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
+
+ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000
+
+ $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 15Mbits/s -B 192.172.0.1
+
+
+ False
+ USRPb210.ALU_EPC.SonyExperiaM4.10MHz.FDD.Band_7.DL.1TX.1RX
+ 10
+
+
+
+ lte-softmodem
+
+ calisson
+ stevens
+ amerique
+ 390
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 100
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
+
+ $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
+ -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W
+
+
+
+
+ False
+
+ /tmp
+
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
+
+ sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -s -i 1 -u -f m -B 192.172.0.2
+
+ throughput_test min=10.0Mbits/sec max=10.0Mbits/sec average=10.0Mbits/sec
+
+ False
+ sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue
+
+
+ /tmp
+
+
+
+
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash
+
+ /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
+
+ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000
+
+ $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 15Mbits/s -B 192.172.0.1
+
+
+ False
+ USRPb210.ALU_EPC.SonyExperiaM4.20MHz.FDD.Band_7.DL.1TX.1RX
+ 10
+
+
+
diff --git a/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py b/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py
index 99aed7c29f..3921afd8f2 100755
--- a/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py
+++ b/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py
@@ -1,4 +1,34 @@
#!/usr/bin/python
+#******************************************************************************
+
+# OpenAirInterface
+# Copyright(c) 1999 - 2014 Eurecom
+
+# OpenAirInterface is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+
+# OpenAirInterface is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with OpenAirInterface.The full GNU General Public License is
+# included in this distribution in the file called "COPYING". If not,
+# see .
+
+# Contact Information
+# OpenAirInterface Admin: openair_admin@eurecom.fr
+# OpenAirInterface Tech : openair_tech@eurecom.fr
+# OpenAirInterface Dev : openair4g-devel@lists.eurecom.fr
+
+# Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
+
+# *******************************************************************************/
+# \author Navid Nikaein, Rohit Gupta
import time
import serial
@@ -28,17 +58,22 @@ from lib_autotest import *
def find_open_port():
global serial_port, ser
max_ports=100
- if os.path.exists(serial_port) == True:
- return serial_port
- for port in range(2,100):
- serial_port = '/dev/ttyUSB'+str(port)
- if os.path.exists(serial_port) == True:
- print 'New Serial Port : ' + serial_port
- break
-
- ser = serial.Serial(port=serial_port)
- return
-
+ serial_port=''
+ while True:
+ if os.path.exists(serial_port) == True:
+ return serial_port
+ for port in range(2,100):
+ serial_port_tmp = '/dev/ttyUSB'+str(port)
+ if os.path.exists(serial_port_tmp) == True:
+ print 'New Serial Port : ' + serial_port_tmp
+ serial_port = serial_port_tmp
+ break
+ if serial_port == '':
+ print" Not able to detect valid serial ports. Resetting the modem now..."
+ reset_ue()
+ else :
+ ser = serial.Serial(port=serial_port)
+ return
#serial_port = '/dev/ttyUSB2'
diff --git a/cmake_targets/autotests/tools/configure_cots_huaweiE398_ue.py b/cmake_targets/autotests/tools/configure_cots_huaweiE398_ue.py
index 07d532c5d6..9646cc69ff 100755
--- a/cmake_targets/autotests/tools/configure_cots_huaweiE398_ue.py
+++ b/cmake_targets/autotests/tools/configure_cots_huaweiE398_ue.py
@@ -1,4 +1,34 @@
#!/usr/bin/python
+#******************************************************************************
+
+# OpenAirInterface
+# Copyright(c) 1999 - 2014 Eurecom
+
+# OpenAirInterface is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+
+# OpenAirInterface is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with OpenAirInterface.The full GNU General Public License is
+# included in this distribution in the file called "COPYING". If not,
+# see .
+
+# Contact Information
+# OpenAirInterface Admin: openair_admin@eurecom.fr
+# OpenAirInterface Tech : openair_tech@eurecom.fr
+# OpenAirInterface Dev : openair4g-devel@lists.eurecom.fr
+
+# Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
+
+# *******************************************************************************/
+# \author Navid Nikaein, Rohit Gupta
import time
import serial
@@ -28,16 +58,23 @@ from lib_autotest import *
def find_open_port():
global serial_port, ser
max_ports=100
- if os.path.exists(serial_port) == True:
- return serial_port
- for port in range(0,100):
- serial_port = '/dev/ttyUSB'+str(port)
- if os.path.exists(serial_port) == True:
- print 'New Serial Port : ' + serial_port
- break
+ serial_port=''
+ while True:
+ if os.path.exists(serial_port) == True:
+ return serial_port
+ for port in range(2,100):
+ serial_port_tmp = '/dev/ttyUSB'+str(port)
+ if os.path.exists(serial_port_tmp) == True:
+ print 'New Serial Port : ' + serial_port_tmp
+ serial_port = serial_port_tmp
+ break
+ if serial_port == '':
+ print" Not able to detect valid serial ports. Resetting the modem now..."
+ reset_ue()
+ else :
+ ser = serial.Serial(port=serial_port)
+ return
- ser = serial.Serial(port=serial_port)
- return
diff --git a/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py b/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py
new file mode 100755
index 0000000000..eba3156976
--- /dev/null
+++ b/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py
@@ -0,0 +1,118 @@
+#!/usr/bin/python
+
+import time
+import serial
+import os
+from pyroute2 import IPRoute
+import sys
+import re
+import threading
+import signal
+import traceback
+import os
+import commands
+
+# Find a device ID by running sudo adb devices
+# The device ID below is for Sony Xperia M4
+
+device_id='YT9115PX1E'
+
+
+openair_dir = os.environ.get('OPENAIR_DIR')
+if openair_dir == None:
+ print "Error getting OPENAIR_DIR environment variable"
+ sys.exit(1)
+
+sys.path.append(os.path.expandvars('$OPENAIR_DIR/cmake_targets/autotests/tools/'))
+
+from lib_autotest import *
+
+def signal_handler(signal, frame):
+ print('You pressed Ctrl+C!')
+ print('Exiting now...')
+ timeout=10
+ exit_flag=1
+ sys.exit(0)
+
+signal.signal(signal.SIGINT, signal_handler)
+
+# Find all the process IDs in a phone given the name of process
+def kill_processes(name):
+ print " Killing all processes by name..." + name
+ while 1:
+ cmd = 'sudo adb -s ' + device_id +' shell "ps |grep ' + name + '"'
+ status, out = commands.getstatusoutput(cmd)
+ if status != 0:
+ print "Error execting command to kill process " + name
+ sys.exit(1)
+ print "Out = " + out
+ if out=='':
+ break;
+ out_arr = out.split()
+ pid_to_kill = out_arr[1]
+ print "Now killing process ID " + pid_to_kill + " on Phone"
+ cmd = 'sudo adb -s ' + device_id +' shell "kill ' + pid_to_kill + '"'
+ status, out = commands.getstatusoutput(cmd)
+ if status != 0:
+ print "Error execting command to kill process " + name
+ sys.exit(1)
+ print "Out = " + out
+
+def start_ue () :
+ #print 'Enter your commands below.\r\nInsert "exit" to leave the application.'
+ print 'Killing old iperf/ping sessions'
+ kill_processes('iperf')
+ kill_processes('ping')
+ print "Turning off airplane mode"
+ os.system('sudo -E adb devices')
+ os.system('sudo -E adb -s ' + device_id + ' shell \"settings put global airplane_mode_on 0; am broadcast -a android.intent.action.AIRPLANE_MODE --ez state false\"')
+
+ while 1:
+ time.sleep ( 2)
+ #Now we check if ppp0 interface is up and running
+ try:
+ cmd = 'sudo adb -s ' + device_id + ' shell netcfg |grep 192.'
+ status, out = commands.getstatusoutput(cmd)
+ if (out == '') :
+ print "Waiting for UE to connect and get IP Address..."
+ else :
+ print "UE is now connected. IP Address settings are..." + out
+ os.system('sleep 5')
+ os.system ('sudo adb -s ' + device_id + ' shell ping ' + gw)
+ break
+ except Exception, e:
+ error = error + ' In function: ' + sys._getframe().f_code.co_name + ': *** Caught exception: ' + str(e.__class__) + " : " + str( e)
+ error = error + traceback.format_exc()
+ print error
+
+
+
+def stop_ue():
+ print "Turning on airplane mode"
+ os.system('sudo adb devices')
+ os.system('sudo adb -s ' + device_id + ' shell \"settings put global airplane_mode_on 1; am broadcast -a android.intent.action.AIRPLANE_MODE --ez state true\" ')
+ print "Killing iperf/ping sessions"
+ kill_processes('iperf')
+ kill_processes('ping')
+
+i=1
+gw='192.172.0.1'
+while i < len(sys.argv):
+ arg=sys.argv[i]
+ if arg == '--start-ue' :
+ start_ue()
+ elif arg == '--stop-ue' :
+ stop_ue()
+ elif arg == '-gw' :
+ gw = sys.argv[i+1]
+ i=i+1
+ elif arg == '-h' :
+ print "--stop-ue: Stop the UE. Turn on airplane mode"
+ print "--start-ue: Start the UE. Turn off airplane mode"
+ print "-gw: Specify the default gw as sometimes the gateway/route arguments are not set properly via wvdial"
+ else :
+ print " Script called with wrong arguments, arg = " + arg
+ sys.exit()
+ i = i +1
+
+
diff --git a/cmake_targets/autotests/tools/find_usb_path.bash b/cmake_targets/autotests/tools/find_usb_path.bash
index c8ec950292..d2a80cd6c2 100755
--- a/cmake_targets/autotests/tools/find_usb_path.bash
+++ b/cmake_targets/autotests/tools/find_usb_path.bash
@@ -1,4 +1,35 @@
#!/bin/bash
+#******************************************************************************
+
+# OpenAirInterface
+# Copyright(c) 1999 - 2014 Eurecom
+
+# OpenAirInterface is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+
+# OpenAirInterface is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with OpenAirInterface.The full GNU General Public License is
+# included in this distribution in the file called "COPYING". If not,
+# see .
+
+# Contact Information
+# OpenAirInterface Admin: openair_admin@eurecom.fr
+# OpenAirInterface Tech : openair_tech@eurecom.fr
+# OpenAirInterface Dev : openair4g-devel@lists.eurecom.fr
+
+# Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
+
+# *******************************************************************************/
+# \author Navid Nikaein, Rohit Gupta
+
#arg1 idVendor
#arg2 idProduct
diff --git a/cmake_targets/autotests/tools/iperf_script b/cmake_targets/autotests/tools/iperf_script
index ecd2f7a996..5f9baff09f 100755
--- a/cmake_targets/autotests/tools/iperf_script
+++ b/cmake_targets/autotests/tools/iperf_script
@@ -1,4 +1,34 @@
#!/bin/bash
+#******************************************************************************
+
+# OpenAirInterface
+# Copyright(c) 1999 - 2014 Eurecom
+
+# OpenAirInterface is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+
+# OpenAirInterface is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with OpenAirInterface.The full GNU General Public License is
+# included in this distribution in the file called "COPYING". If not,
+# see .
+
+# Contact Information
+# OpenAirInterface Admin: openair_admin@eurecom.fr
+# OpenAirInterface Tech : openair_tech@eurecom.fr
+# OpenAirInterface Dev : openair4g-devel@lists.eurecom.fr
+
+# Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
+
+# *******************************************************************************/
+# \author Navid Nikaein, Rohit Gupta
#arg1 timeout to wait before running the script
#arg2 interface
diff --git a/cmake_targets/autotests/tools/iperf_script_phone b/cmake_targets/autotests/tools/iperf_script_phone
new file mode 100755
index 0000000000..f9ec7973f4
--- /dev/null
+++ b/cmake_targets/autotests/tools/iperf_script_phone
@@ -0,0 +1,63 @@
+#!/bin/bash
+#******************************************************************************
+
+# OpenAirInterface
+# Copyright(c) 1999 - 2014 Eurecom
+
+# OpenAirInterface is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+
+# OpenAirInterface is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with OpenAirInterface.The full GNU General Public License is
+# included in this distribution in the file called "COPYING". If not,
+# see .
+
+# Contact Information
+# OpenAirInterface Admin: openair_admin@eurecom.fr
+# OpenAirInterface Tech : openair_tech@eurecom.fr
+# OpenAirInterface Dev : openair4g-devel@lists.eurecom.fr
+
+# Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
+
+# *******************************************************************************/
+# \author Navid Nikaein, Rohit Gupta
+
+#arg1 timeout to wait before running the script
+#arg2 interface
+#arg3 iperf arguments
+
+args=($*)
+timeout=${args[0]}
+device_id=${args[1]}
+iperf_args=(${args[@]:2})
+
+#array=${1:-1}
+echo "args = ${args[@]}"
+echo "timeout = $timeout"
+echo "device_id = $device_id"
+echo "iperf_args = ${iperf_args[@]}"
+
+sleep $timeout
+
+while true ; do
+ cmd=`sudo adb -s $device_id shell netcfg |grep 192.`
+ if [ -z "$cmd" ]; then
+ echo "Wating for UE to connect and get IP Address..."
+ sleep 1
+ else
+ echo "UE is now connected. IP Address settings are... $cmd"
+ break
+ fi
+done
+
+echo "Starting iperf now..."
+
+sudo adb -s $device_id shell /data/local/tmp/iperf ${iperf_args[@]}
diff --git a/cmake_targets/autotests/tools/lib_autotest.py b/cmake_targets/autotests/tools/lib_autotest.py
index 67234de567..9ac2305250 100644
--- a/cmake_targets/autotests/tools/lib_autotest.py
+++ b/cmake_targets/autotests/tools/lib_autotest.py
@@ -1,4 +1,34 @@
#!/usr/bin/python
+#******************************************************************************
+
+# OpenAirInterface
+# Copyright(c) 1999 - 2014 Eurecom
+
+# OpenAirInterface is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+
+# OpenAirInterface is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with OpenAirInterface.The full GNU General Public License is
+# included in this distribution in the file called "COPYING". If not,
+# see .
+
+# Contact Information
+# OpenAirInterface Admin: openair_admin@eurecom.fr
+# OpenAirInterface Tech : openair_tech@eurecom.fr
+# OpenAirInterface Dev : openair4g-devel@lists.eurecom.fr
+
+# Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
+
+# *******************************************************************************/
+# \author Navid Nikaein, Rohit Gupta
import os
from pyroute2 import IPRoute
diff --git a/cmake_targets/autotests/tools/search_repl.py b/cmake_targets/autotests/tools/search_repl.py
index be0568599f..e43feccfb3 100755
--- a/cmake_targets/autotests/tools/search_repl.py
+++ b/cmake_targets/autotests/tools/search_repl.py
@@ -1,4 +1,35 @@
#!/usr/bin/python
+#******************************************************************************
+
+# OpenAirInterface
+# Copyright(c) 1999 - 2014 Eurecom
+
+# OpenAirInterface is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+
+# OpenAirInterface is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with OpenAirInterface.The full GNU General Public License is
+# included in this distribution in the file called "COPYING". If not,
+# see .
+
+# Contact Information
+# OpenAirInterface Admin: openair_admin@eurecom.fr
+# OpenAirInterface Tech : openair_tech@eurecom.fr
+# OpenAirInterface Dev : openair4g-devel@lists.eurecom.fr
+
+# Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
+
+# *******************************************************************************/
+# \author Navid Nikaein, Rohit Gupta
+
import sys
import re
import os
diff --git a/cmake_targets/tools/build_helper b/cmake_targets/tools/build_helper
index 689c15dc5b..294c5006a5 100755
--- a/cmake_targets/tools/build_helper
+++ b/cmake_targets/tools/build_helper
@@ -270,7 +270,8 @@ check_install_oai_software() {
wvdial \
python-numpy \
sshpass \
- libxslt1-dev
+ libxslt1-dev \
+ android-tools-adb
$SUDO update-alternatives --set liblapack.so /usr/lib/atlas-base/atlas/liblapack.so
if [ `lsb_release -rs` = '12.04' ] ; then
diff --git a/cmake_targets/tools/run_enb_ue_virt_noS1 b/cmake_targets/tools/run_enb_ue_virt_noS1
index 74abe0de02..f5ed770f80 100755
--- a/cmake_targets/tools/run_enb_ue_virt_noS1
+++ b/cmake_targets/tools/run_enb_ue_virt_noS1
@@ -71,6 +71,7 @@ function help()
echo_error " and PDCP-LTE. Then capture for all the interfaces with the following filters: s1ap or lte_rrc or mac-lte or rlc-lte"
echo_error " or pdcp-lte. Note the L2 pdus are transmitted to the local interface."
echo_error " -x, --xforms Run XFORMS scope windows."
+ echo_error " -n, --num-frames Set number of frames for simulation"
}
@@ -165,6 +166,11 @@ function main()
exe_arguments="$exe_arguments -P wireshark"
shift 1;
;;
+ -n | --num-frames)
+ echo "setting the number of frames in simulation to $2"
+ exe_arguments="$exe_arguments -n $2"
+ shift 2;
+ ;;
*)
echo "Unknown option $1"
help
diff --git a/openair1/PHY/LTE_ESTIMATION/lte_dl_mbsfn_channel_estimation.c b/openair1/PHY/LTE_ESTIMATION/lte_dl_mbsfn_channel_estimation.c
index fd38ebcbff..1dbafdb911 100644
--- a/openair1/PHY/LTE_ESTIMATION/lte_dl_mbsfn_channel_estimation.c
+++ b/openair1/PHY/LTE_ESTIMATION/lte_dl_mbsfn_channel_estimation.c
@@ -755,27 +755,27 @@ int lte_dl_mbsfn_channel_estimation(PHY_VARS_UE *phy_vars_ue,
if (phy_vars_ue->lte_ue_common_vars.dl_ch_estimates[eNB_offset][aa]) {
switch (phy_vars_ue->lte_frame_parms.N_RB_DL) {
case 6:
- idft128((int16_t*) &phy_vars_ue->lte_ue_common_vars.dl_ch_estimates[eNB_offset][aa][LTE_CE_OFFSET],
+ idft128((int16_t*) &phy_vars_ue->lte_ue_common_vars.dl_ch_estimates[eNB_offset][aa][8],
(int16_t*) phy_vars_ue->lte_ue_common_vars.dl_ch_estimates_time[eNB_offset][aa],
1);
break;
case 25:
- idft512((int16_t*) &phy_vars_ue->lte_ue_common_vars.dl_ch_estimates[eNB_offset][aa][LTE_CE_OFFSET],
+ idft512((int16_t*) &phy_vars_ue->lte_ue_common_vars.dl_ch_estimates[eNB_offset][aa][8],
(int16_t*) phy_vars_ue->lte_ue_common_vars.dl_ch_estimates_time[eNB_offset][aa],
1);
break;
case 50:
- idft1024((int16_t*) &phy_vars_ue->lte_ue_common_vars.dl_ch_estimates[eNB_offset][aa][LTE_CE_OFFSET],
+ idft1024((int16_t*) &phy_vars_ue->lte_ue_common_vars.dl_ch_estimates[eNB_offset][aa][8],
(int16_t*) phy_vars_ue->lte_ue_common_vars.dl_ch_estimates_time[eNB_offset][aa],
1);
break;
case 75:
- idft1536((int16_t*) &phy_vars_ue->lte_ue_common_vars.dl_ch_estimates[eNB_offset][aa][LTE_CE_OFFSET],
+ idft1536((int16_t*) &phy_vars_ue->lte_ue_common_vars.dl_ch_estimates[eNB_offset][aa][8],
(int16_t*) phy_vars_ue->lte_ue_common_vars.dl_ch_estimates_time[eNB_offset][aa],
1);
break;
case 100:
- idft2048((int16_t*) &phy_vars_ue->lte_ue_common_vars.dl_ch_estimates[eNB_offset][aa][LTE_CE_OFFSET],
+ idft2048((int16_t*) &phy_vars_ue->lte_ue_common_vars.dl_ch_estimates[eNB_offset][aa][8],
(int16_t*) phy_vars_ue->lte_ue_common_vars.dl_ch_estimates_time[eNB_offset][aa],
1);
break;
diff --git a/openair1/SCHED/phy_procedures_lte_eNb.c b/openair1/SCHED/phy_procedures_lte_eNb.c
index 18d20f6372..ff3d17ad49 100755
--- a/openair1/SCHED/phy_procedures_lte_eNb.c
+++ b/openair1/SCHED/phy_procedures_lte_eNb.c
@@ -1875,6 +1875,7 @@ void process_HARQ_feedback(uint8_t UE_id,
// then Increment DLSCH round index
dlsch_harq_proc->round++;
+
if (dlsch_harq_proc->round == dlsch->Mlimit) {
// This was the last round for DLSCH so reset round and increment l2_error counter
#ifdef DEBUG_PHY_PROC
diff --git a/openair1/SIMULATION/LTE_PHY/mbmssim.c b/openair1/SIMULATION/LTE_PHY/mbmssim.c
index 9f09944609..2691257895 100644
--- a/openair1/SIMULATION/LTE_PHY/mbmssim.c
+++ b/openair1/SIMULATION/LTE_PHY/mbmssim.c
@@ -127,7 +127,7 @@ int main(int argc, char **argv)
char c;
- int i,l,aa,aarx,k;
+ int i,l,l2,aa,aarx,k;
double sigma2, sigma2_dB=0,SNR,snr0=-2.0,snr1=0.0;
uint8_t snr1set=0;
double snr_step=1,input_snr_step=1;
@@ -335,7 +335,11 @@ int main(int argc, char **argv)
else
sprintf(fname,"embms_awgn_%d_%d.m",mcs,N_RB_DL);
- fd = fopen(fname,"w");
+ if (!(fd = fopen(fname,"w"))) {
+ printf("Cannot open %s, check permissions\n",fname);
+ exit(-1);
+ }
+
if (awgn_flag==0)
fprintf(fd,"SNR_%d_%d=[];errs_mch_%d_%d=[];mch_trials_%d_%d=[];\n",
@@ -536,11 +540,25 @@ int main(int argc, char **argv)
}
}
}
-
- rx_pmch(PHY_vars_UE,
- 0,
- subframe%10,
- l);
+
+ if (l==6)
+ for (l2=2;l2<7;l2++)
+ rx_pmch(PHY_vars_UE,
+ 0,
+ subframe%10,
+ l2);
+ if (l==6)
+ for (l2=2;l2<7;l2++)
+ rx_pmch(PHY_vars_UE,
+ 0,
+ subframe%10,
+ l2);
+ if (l==11)
+ for (l2=7;l2<12;l2++)
+ rx_pmch(PHY_vars_UE,
+ 0,
+ subframe%10,
+ l2);
}
PHY_vars_UE->dlsch_ue_MCH[0]->harq_processes[0]->G = get_G(&PHY_vars_UE->lte_frame_parms,
diff --git a/targets/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp b/targets/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp
index b5b7420167..fa900197b1 100644
--- a/targets/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp
+++ b/targets/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp
@@ -609,7 +609,7 @@ extern "C" {
openair0_cfg[0].tx_scheduling_advance = 11*openair0_cfg[0].samples_per_packet;
break;
case 23040000:
- s->usrp->set_master_clock_rate(46.08e6);
+ s->usrp->set_master_clock_rate(23.04e6); //to be checked
openair0_cfg[0].samples_per_packet = 2048;
openair0_cfg[0].tx_sample_advance = 113;
openair0_cfg[0].tx_bw = 20e6;
@@ -617,7 +617,7 @@ extern "C" {
openair0_cfg[0].tx_scheduling_advance = 8*openair0_cfg[0].samples_per_packet;
break;
case 15360000:
- s->usrp->set_master_clock_rate(30.72e6);
+ s->usrp->set_master_clock_rate(15.36e06);
openair0_cfg[0].samples_per_packet = 2048;
openair0_cfg[0].tx_sample_advance = 113;
openair0_cfg[0].tx_bw = 10e6;
@@ -625,7 +625,7 @@ extern "C" {
openair0_cfg[0].tx_scheduling_advance = 10240;
break;
case 7680000:
- s->usrp->set_master_clock_rate(30.72e6);
+ s->usrp->set_master_clock_rate(7.68e6);
openair0_cfg[0].samples_per_packet = 1024;
openair0_cfg[0].tx_sample_advance = 70;//103;
openair0_cfg[0].tx_bw = 5e6;
@@ -633,7 +633,7 @@ extern "C" {
openair0_cfg[0].tx_scheduling_advance = 5*openair0_cfg[0].samples_per_packet;
break;
case 1920000:
- s->usrp->set_master_clock_rate(30.72e6);
+ s->usrp->set_master_clock_rate(7.68e6);
openair0_cfg[0].samples_per_packet = 256;
openair0_cfg[0].tx_sample_advance = 40;
openair0_cfg[0].tx_bw = 1.25e6;
@@ -687,6 +687,8 @@ extern "C" {
// display USRP settings
std::cout << boost::format("Actual master clock: %fMHz...") % (s->usrp->get_master_clock_rate()/1e6) << std::endl;
+
+ sleep(1);
// create tx & rx streamer
uhd::stream_args_t stream_args_rx("sc16", "sc16");
diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf
index 1ea7b64740..3583deb7e3 100644
--- a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf
+++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf
@@ -35,7 +35,7 @@ eNBs =
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 90;
- rx_gain = 132;
+ rx_gain = 125;
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
diff --git a/targets/RT/USER/lte-softmodem.c b/targets/RT/USER/lte-softmodem.c
index 3a64711cfb..1e67f5bb8f 100644
--- a/targets/RT/USER/lte-softmodem.c
+++ b/targets/RT/USER/lte-softmodem.c
@@ -50,8 +50,9 @@
#include
#include
#include
-
+#include
#include "rt_wrapper.h"
+
#undef MALLOC //there are two conflicting definitions, so we better make sure we don't use it at all
#include "assertions.h"
@@ -1114,7 +1115,67 @@ static void* eNB_thread_tx( void* param )
LOG_I( HW, "[SCHED] eNB TX deadline thread %d(TID %ld) started on CPU %d\n", proc->subframe, gettid(), sched_getcpu() );
#else
- LOG_I( HW, "[SCHED][eNB] TX thread %d started on CPU %d TID %d\n", proc->subframe, sched_getcpu(),gettid() );
+ int policy, s, j;
+ struct sched_param sparam;
+ char cpu_affinity[1024];
+ cpu_set_t cpuset;
+
+ /* Set affinity mask to include CPUs 1 to MAX_CPUS */
+ /* CPU 0 is reserved for UHD threads */
+ /* CPU 1 is reserved for all TX threads */
+ CPU_ZERO(&cpuset);
+ //for (j = 1; j < get_nprocs(); j++)
+ CPU_SET(1, &cpuset);
+
+ s = pthread_setaffinity_np(pthread_self(), sizeof(cpu_set_t), &cpuset);
+ if (s != 0)
+ {
+ perror( "pthread_setaffinity_np");
+ exit_fun("Error setting processor affinity");
+ }
+ /* Check the actual affinity mask assigned to the thread */
+
+ s = pthread_getaffinity_np(pthread_self(), sizeof(cpu_set_t), &cpuset);
+ if (s != 0)
+ {
+ perror( "pthread_getaffinity_np");
+ exit_fun("Error getting processor affinity ");
+ }
+ memset(cpu_affinity,0,sizeof(cpu_affinity));
+ for (j = 0; j < CPU_SETSIZE; j++)
+ if (CPU_ISSET(j, &cpuset))
+ {
+ char temp[1024];
+ sprintf (temp, " CPU_%d", j);
+ strcat(cpu_affinity, temp);
+ }
+
+ memset(&sparam, 0 , sizeof (sparam));
+ sparam.sched_priority = sched_get_priority_max(SCHED_FIFO)-1;
+ policy = SCHED_FIFO ;
+
+ s = pthread_setschedparam(pthread_self(), policy, &sparam);
+ if (s != 0)
+ {
+ perror("pthread_setschedparam : ");
+ exit_fun("Error setting thread priority");
+ }
+ s = pthread_getschedparam(pthread_self(), &policy, &sparam);
+ if (s != 0)
+ {
+ perror("pthread_getschedparam : ");
+ exit_fun("Error getting thread priority");
+
+ }
+
+ LOG_I( HW, "[SCHED][eNB] TX thread %d started on CPU %d TID %ld, sched_policy = %s , priority = %d, CPU Affinity=%s \n", proc->subframe, sched_getcpu(),gettid(),
+ (policy == SCHED_FIFO) ? "SCHED_FIFO" :
+ (policy == SCHED_RR) ? "SCHED_RR" :
+ (policy == SCHED_OTHER) ? "SCHED_OTHER" :
+ "???",
+ sparam.sched_priority, cpu_affinity );
+
+
#endif
#endif
@@ -1201,7 +1262,7 @@ static void* eNB_thread_tx( void* param )
/*
short *txdata = (short*)&PHY_vars_eNB_g[0][proc->CC_id]->lte_eNB_common_vars.txdata[0][0][proc->subframe_tx*PHY_vars_eNB_g[0][proc->CC_id]->lte_frame_parms.samples_per_tti];
int i;
- for (i=0;i<7680*2;i+=8) {
+ for (i=0;iCC_id]->lte_frame_parms.samples_per_tti*2;i+=8) {
txdata[i] = 2047;
txdata[i+1] = 0;
txdata[i+2] = 0;
@@ -1335,7 +1396,73 @@ static void* eNB_thread_rx( void* param )
LOG_I( HW, "[SCHED] eNB RX deadline thread %d(TID %ld) started on CPU %d\n", proc->subframe, gettid(), sched_getcpu() );
#else
- LOG_I( HW, "[SCHED][eNB] RX thread %d started on CPU %d TID %d\n", proc->subframe, sched_getcpu(),gettid() );
+ int policy, s, j;
+ struct sched_param sparam;
+ char cpu_affinity[1024];
+ cpu_set_t cpuset;
+
+ /* Set affinity mask to include CPUs 1 to MAX_CPUS */
+ /* CPU 0 is reserved for UHD */
+ /* CPU 1 is reserved for all TX threads */
+ /* CPU 2..MAX_CPUS is reserved for all RX threads */
+ CPU_ZERO(&cpuset);
+ for (j = 2; j < get_nprocs(); j++)
+ CPU_SET(j, &cpuset);
+
+ s = pthread_setaffinity_np(pthread_self(), sizeof(cpu_set_t), &cpuset);
+ if (s != 0)
+ {
+ perror( "pthread_setaffinity_np");
+ exit_fun (" Error setting processor affinity :");
+ }
+ /* Check the actual affinity mask assigned to the thread */
+
+ s = pthread_getaffinity_np(pthread_self(), sizeof(cpu_set_t), &cpuset);
+ if (s != 0)
+ {
+ perror ("pthread_getaffinity_np");
+ exit_fun (" Error getting processor affinity :");
+ }
+ memset(cpu_affinity,0, sizeof(cpu_affinity));
+
+ for (j = 0; j < CPU_SETSIZE; j++)
+ if (CPU_ISSET(j, &cpuset))
+ {
+ char temp[1024];
+ sprintf (temp, " CPU_%d", j);
+ strcat(cpu_affinity, temp);
+ }
+
+
+ memset(&sparam, 0 , sizeof (sparam));
+ sparam.sched_priority = sched_get_priority_max(SCHED_FIFO)-1;
+
+ policy = SCHED_FIFO ;
+ s = pthread_setschedparam(pthread_self(), policy, &sparam);
+ if (s != 0)
+ {
+ perror("pthread_setschedparam : ");
+ exit_fun("Error setting thread priority");
+ }
+
+ memset(&sparam, 0 , sizeof (sparam));
+
+ s = pthread_getschedparam(pthread_self(), &policy, &sparam);
+ if (s != 0)
+ {
+ perror("pthread_getschedparam");
+ exit_fun("Error getting thread priority");
+ }
+
+
+LOG_I( HW, "[SCHED][eNB] RX thread %d started on CPU %d TID %ld, sched_policy = %s, priority = %d, CPU Affinity = %s\n", proc->subframe, sched_getcpu(),gettid(),
+ (policy == SCHED_FIFO) ? "SCHED_FIFO" :
+ (policy == SCHED_RR) ? "SCHED_RR" :
+ (policy == SCHED_OTHER) ? "SCHED_OTHER" :
+ "???",
+ sparam.sched_priority, cpu_affinity);
+
+
#endif
#endif // RTAI
@@ -1676,6 +1803,69 @@ static void* eNB_thread( void* arg )
gettid(),sched_getcpu());
}
+#else
+
+ int policy, s, j;
+ struct sched_param sparam;
+ char cpu_affinity[1024];
+ cpu_set_t cpuset;
+
+ /* Set affinity mask to include CPUs 1 to MAX_CPUS */
+ /* CPU 0 is reserved for UHD threads */
+ CPU_ZERO(&cpuset);
+ for (j = 1; j < get_nprocs(); j++)
+ CPU_SET(j, &cpuset);
+
+ s = pthread_setaffinity_np(pthread_self(), sizeof(cpu_set_t), &cpuset);
+ if (s != 0)
+ {
+ perror( "pthread_setaffinity_np");
+ exit_fun("Error setting processor affinity");
+ }
+ /* Check the actual affinity mask assigned to the thread */
+
+ s = pthread_getaffinity_np(pthread_self(), sizeof(cpu_set_t), &cpuset);
+ if (s != 0)
+ {
+ perror( "pthread_getaffinity_np");
+ exit_fun("Error getting processor affinity ");
+ }
+ memset(cpu_affinity, 0 , sizeof(cpu_affinity));
+ for (j = 0; j < CPU_SETSIZE; j++)
+ if (CPU_ISSET(j, &cpuset))
+ {
+ char temp[1024];
+ sprintf(temp, " CPU_%d ", j);
+ strcat(cpu_affinity, temp);
+ }
+
+ memset(&sparam, 0 , sizeof (sparam));
+ sparam.sched_priority = sched_get_priority_max(SCHED_FIFO);
+ policy = SCHED_FIFO ;
+
+ s = pthread_setschedparam(pthread_self(), policy, &sparam);
+ if (s != 0)
+ {
+ perror("pthread_setschedparam : ");
+ exit_fun("Error setting thread priority");
+ }
+ s = pthread_getschedparam(pthread_self(), &policy, &sparam);
+ if (s != 0)
+ {
+ perror("pthread_getschedparam : ");
+ exit_fun("Error getting thread priority");
+
+ }
+
+
+ LOG_I( HW, "[SCHED][eNB] Started eNB main thread on CPU %d TID %ld , sched_policy = %s, priority = %d, CPU Affinity = %s \n", (int)sched_getcpu(), gettid(),
+ (policy == SCHED_FIFO) ? "SCHED_FIFO" :
+ (policy == SCHED_RR) ? "SCHED_RR" :
+ (policy == SCHED_OTHER) ? "SCHED_OTHER" :
+ "???",
+ (int) sparam.sched_priority, cpu_affinity);
+
+
#endif
#endif
@@ -1685,9 +1875,7 @@ static void* eNB_thread( void* arg )
goto eNB_thread_cleanup;
#ifdef RTAI
- printf( "[SCHED][eNB] Started eNB main thread (id %p)\n", task );
-#else
- printf( "[SCHED][eNB] Started eNB main thread on CPU %d TID %ld\n", sched_getcpu(), gettid());
+ LOG_I( HW, "[SCHED][eNB] Started eNB main thread (id %p)\n", task );
#endif
#ifdef HARD_RT
@@ -3112,6 +3300,43 @@ int main( int argc, char **argv )
#endif
}
+
+#ifndef LOWLATENCY
+ cpu_set_t cpuset;
+ int s;
+ char cpu_affinity[1024];
+
+ LOG_I(HW, "Setting the affinity of main function to CPU 0, for device library to use CPU 0 only!\n");
+
+ CPU_ZERO(&cpuset);
+ CPU_SET(0, &cpuset);
+
+ s = pthread_setaffinity_np(pthread_self(), sizeof(cpu_set_t), &cpuset);
+ if (s != 0)
+ {
+ perror( "pthread_setaffinity_np");
+ exit_fun("Error setting processor affinity");
+ }
+ /* Check the actual affinity mask assigned to the thread */
+
+ s = pthread_getaffinity_np(pthread_self(), sizeof(cpu_set_t), &cpuset);
+ if (s != 0)
+ {
+ perror( "pthread_getaffinity_np");
+ exit_fun("Error getting processor affinity ");
+ }
+ memset(cpu_affinity, 0 , sizeof(cpu_affinity));
+ for (int j = 0; j < CPU_SETSIZE; j++)
+ if (CPU_ISSET(j, &cpuset))
+ {
+ char temp[1024];
+ sprintf(temp, " CPU_%d ", j);
+ strcat(cpu_affinity, temp);
+ }
+
+ LOG_I(HW, "CPU Affinity of main() function is... %s\n", cpu_affinity);
+#endif
+
/* device host type is set*/
openair0.host_type = BBU_HOST;
/* device type is initialized NONE_DEV (no RF device) when the RF device will be initiated device type will be set */