maki/openairinterface5g
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

lte-softmodem now uses new thread for pdcp

Browse Source 
updated llr scaling for PDCCH and PDSCH in TM5
initialized all newly allocated memory to 0 in new_eNB/UE_ulsch/dlsch and setting pointers to 0 after freeing memory in free_eNB/UE_ulsch/dlsch  
some small modifications related to EMOS (from the MU-MIMO measurement campaign)


git-svn-id: http://svn.eurecom.fr/openair4G/trunk@4480 818b1a75-f10b-46b9-bf7c-635c3b92a50f
This commit is contained in:
Florian Kaltenberger
2013-11-21 10:39:13 +00:00
parent c4283f8701
commit 731f75c594
27 changed files with 332 additions and 158 deletions
Download Patch File Download Diff File Expand all files Collapse all files
targets/ARCH/EXMIMO/USERSPACE/OCTAVE/freq_calibration.m
+4 -3
View File
@@ -23,7 +23,7 @@ limeparms;
rf_mode = (RXEN+0+TXLPFNORM+TXLPFEN+TXLPF25+RXLPFNORM+RXLPFEN+RXLPF25+LNA1ON+LNAMax+RFBBNORM+DMAMODE_RX+0)*[1 0 0 0];
freq_rx = fc*[1 0 0 0];
freq_tx = freq_rx+1920000;
rx_gain = 30*[1 1 1 1];
rx_gain = 0*[1 1 1 1];
tx_gain = 25*[1 1 1 1];
%rf_local=rf_local*[1 1 1 1];
rf_local = [8254813 8255016 8254813 8254813]; %exmimo2_2
@@ -33,8 +33,9 @@ rf_vcocal=rf_vcocal_19G*[1 1 1 1];
tdd_config = DUPLEXMODE_FDD + TXRXSWITCH_LSB;
syncmode = SYNCMODE_FREE;
rffe_rxg_low = 63*[1 1 1 1];
rffe_rxg_final = 63*[1 1 1 1];
rffe_rxg_final = 31*[1 1 1 1];
rffe_band = B19G_TDD*[1 1 1 1];
autocal = [1 1 1 1];
%gpib_send(gpib_card,gpib_device,'*RST;*CLS'); % reset and configure the signal generator
%gpib_send(gpib_card,gpib_device,['POW ' int2str(power_dBm+cables_loss_dB) 'dBm']);
@@ -55,7 +56,7 @@ do
fc
freq_rx = fc*[1 0 0 0];
freq_tx = freq_rx+1920000;
oarf_config_exmimo(card, freq_rx,freq_tx,tdd_config,syncmode,rx_gain,tx_gain,0,rf_mode,rf_rxdc,rf_local,rf_vcocal,rffe_rxg_low,rffe_rxg_final,rffe_band);
oarf_config_exmimo(card, freq_rx,freq_tx,tdd_config,syncmode,rx_gain,tx_gain,0,rf_mode,rf_rxdc,rf_local,rf_vcocal,rffe_rxg_low,rffe_rxg_final,rffe_band,autocal);
i=i+1;
sleep(1);
targets/ARCH/EXMIMO/USERSPACE/OCTAVE/gpib_send.cc
+1 -1
View File
@@ -5,7 +5,7 @@
// compile with: mkoctfile -I/usr/local/include/gpib -lgpib gpib_send.cc
#include <octave/oct.h>
#include "ib.h"
#include <gpib/ib.h>
targets/ARCH/EXMIMO/USERSPACE/OCTAVE/initial_sync.m
+4 -3
View File
@@ -7,6 +7,7 @@ primary_synch; %loads the primary sync signal
sss_gen; %loads the secondary sync signal
% grab a frame
ch=1;
rx_spec;
% load frame
@@ -18,7 +19,7 @@ figure(1)
plot(real(s))
pss_t = upsample(primary_synch0_time,4);
[corr,lag] = xcorr(s(:,1),pss_t);
[corr,lag] = xcorr(s(:,ch).',pss_t);
figure(2);
plot(lag,abs(corr));
@@ -31,9 +32,9 @@ pss_pos = lag(pss_pos0);
sss_pos = pss_pos - 1648; %TDD normal CP
%sss_pos = pss_pos - 1920; %TDD extended CP
psst = s([pss_pos:(pss_pos+511)],1);
psst = s([pss_pos:(pss_pos+511)],ch);
pssf = fft(psst);
ssst = s([sss_pos:(sss_pos+511)],1);
ssst = s([sss_pos:(sss_pos+511)],ch);
sssf = fft(ssst);
pssf_ext = pssf([(512-30):512 2:32]); % extract innter 62 subcarriers
targets/ARCH/EXMIMO/USERSPACE/OCTAVE/lime_cal.m
+4 -4
View File
@@ -4,10 +4,10 @@ card=0;
limeparms;
TX_LO_LEAKAGE_MIN0 = 99999;
TX_LO_LEAKAGE_MIN1 = 99999;
%freq_rx = 1907588000*[1 1 1 1];
freq_rx = 859500000*[1 1 1 1];
freq_tx = freq_rx; %+1920000;
rf_vcocal = rf_vcocal_859*[1 1 1 1];
freq_rx = 1907600000*[1 1 1 1];
%freq_rx = 859500000*[1 1 1 1];
freq_tx = freq_rx+1920000;
rf_vcocal = rf_vcocal_19G*[1 1 1 1];
rf_rxdc = rf_rxdc*[1 1 1 1];
rxgain = 30*[1 1 1 1];
txgain = 25*[1 1 1 1];
targets/ARCH/EXMIMO/USERSPACE/OCTAVE/lime_cal_rx.m
+8 -8
View File
@@ -3,23 +3,23 @@ close all
card=0;
limeparms;
%freq_rx = 1907588000*[1 1 1 1];
freq_rx = 1907600000*[1 1 1 1];
%freq_rx = 700600000*[1 1 1 1];
freq_rx = 748000000*[1 1 1 1];
freq_tx = freq_rx; %+1920000;
rxgain = 0*[1 1 1 1];
%freq_rx = 748000000*[1 1 1 1];
freq_tx = freq_rx+1920000;
rxgain = 30*[1 1 1 1];
txgain = 0*[1 1 1 1];
tdd_config = DUPLEXMODE_FDD + TXRXSWITCH_LSB;
syncmode = SYNCMODE_FREE;
%rf_local = [8254813 8255016 8254813 8254813]; % from the tx calibration
rf_local = [8254813 8255016 8254813 8254813]; % from the tx calibration
%rf_local = [8255842 8255064 8257340 8257340]; % 700MHz
rf_local = [8256776 8255788 8257340 8257340]; % 850MHz
%rf_local = [8256776 8255788 8257340 8257340]; % 850MHz
rf_rxdc = rf_rxdc*[1 1 1 1]; % initial value
rf_vcocal= rf_vcocal_850*[1 1 1 1];
rf_vcocal= rf_vcocal_19G*[1 1 1 1];
rffe_rxg_low = 31*[1 1 1 1];
rffe_rxg_final = 31*[1 1 1 1];
rffe_band = TVWS_TDD*[1 1 1 1];
rffe_band = B19G_TDD*[1 1 1 1];
sleepafterconfig=0.2
targets/ARCH/EXMIMO/USERSPACE/OCTAVE/rx_calibration_rffe.m
+6 -5
View File
@@ -33,22 +33,23 @@ rf_rxdc = [37059 35459 36300 36999]; %exmimo2_2
rf_rxdc = [34689 34756 36300 36999]; %exmimo2_2 with external RF
rf_vcocal=rf_vcocal_19G*[1 1 1 1];
eNBflag = 0;
tdd_config = DUPLEXMODE_FDD + TXRXSWITCH_LSB;
tdd_config = DUPLEXMODE_FDD + TXRXSWITCH_TESTRX;
syncmode = SYNCMODE_FREE;
rffe_rxg_low = 31*[1 1 1 1];
rffe_rxg_final = 31*[1 1 1 1];
rffe_band = B19G_TDD*[1 1 1 1];
autocal = [1 1 1 1];
gpib_send(gpib_card,gpib_device,'*RST;*CLS'); % reset and configure the signal generator
%gpib_send(gpib_card,gpib_device,sprintf("POW %ddBm",power_dBm+cables_loss_dB));
gpib_send(gpib_card,gpib_device,sprintf("POW %ddBm",-14));
gpib_send(gpib_card,gpib_device,sprintf("POW %ddBm",0));
%gpib_send(gpib_card,gpib_device,'FREQ 1.91860GHz');
%gpib_send(gpib_card,gpib_device,'FREQ 1.919225GHz');
%gpib_send(gpib_card,gpib_device,'FREQ 1.909225GHz');
gpib_send(gpib_card,gpib_device,sprintf("FREQ %dHz",fref));
oarf_config_exmimo(card,freq_rx,freq_tx,tdd_config,syncmode,rx_gain,tx_gain,eNBflag,rf_mode,rf_rxdc,rf_local,rf_vcocal,rffe_rxg_low,rffe_rxg_final,rffe_band);
oarf_config_exmimo(card,freq_rx,freq_tx,tdd_config,syncmode,rx_gain,tx_gain,eNBflag,rf_mode,rf_rxdc,rf_local,rf_vcocal,rffe_rxg_low,rffe_rxg_final,rffe_band,autocal);
autocal = [0 0 0 0];
%ALL_rxrfmode = [LNAByp LNAMed LNAMax];
%ALL_gain = 0:10:30;
@@ -87,7 +88,7 @@ for LNA=ALL_rxrfmode
for rffe_rxg_final=ALL_rffe_rxg_final
rffe_rxg_final = rffe_rxg_final*[1 1 1 1];
oarf_config_exmimo(card,freq_rx,freq_tx,tdd_config,syncmode,rx_gain,tx_gain,eNBflag,rf_mode,rf_rxdc,rf_local,rf_vcocal,rffe_rxg_low,rffe_rxg_final,rffe_band);
oarf_config_exmimo(card,freq_rx,freq_tx,tdd_config,syncmode,rx_gain,tx_gain,eNBflag,rf_mode,rf_rxdc,rf_local,rf_vcocal,rffe_rxg_low,rffe_rxg_final,rffe_band,autocal);
sleep(1);
% signal measurement
targets/ARCH/EXMIMO/USERSPACE/OCTAVE/rx_spec.m
+8 -9
View File
@@ -1,21 +1,19 @@
dual_tx=0;
card=0;
limeparms;
active_rf = [1 1 1 1];
active_rf = [1 1 0 0];
%rf_mode = (RXEN+TXEN+TXLPFNORM+TXLPFEN+TXLPF25+RXLPFNORM+RXLPFEN+RXLPF25+LNA1ON+LNAMax+RFBBNORM)*[1 1 1 1];
rf_mode = (RXEN+TXEN+TXLPFNORM+TXLPFEN+TXLPF25+RXLPFNORM+RXLPFEN+RXLPF25+LNA1ON+LNAMax+RFBBNORM)*active_rf;
rf_mode = (RXEN+TXLPFNORM+TXLPFEN+TXLPF25+RXLPFNORM+RXLPFEN+RXLPF25+LNA1ON+LNAMax+RFBBNORM)*active_rf;
rf_mode = rf_mode+(DMAMODE_RX*active_rf);
%freq_rx = 2540000000*[1 1 1 1];
freq_rx = 1907600000*active_rf;
%freq_rx = 1912600000*active_rf; %+ 2540000000*[0 1 0 0]; % + 859500000*[0 0 1 0];
%freq_rx = 1912600000*[1 1 1 1];
%freq_rx = 859500000*[1 1 1 1];
freq_tx = freq_rx; %+1.92e6;
%freq_tx = 2660000000*[1 1 1 1];
freq_tx = freq_rx;
tx_gain = 0*[1 1 1 1];
rx_gain = 30*[1 1 1 1];
rf_local= [8254744 8255063 8257340 8257340]; %rf_local*[1 1 1 1];
%rf_local= [8254212 8256991 8257340 8257340]; %exmimo2 850mhz
rx_gain = 0*[1 1 1 1];
rf_local= rf_local*[1 1 1 1];
rf_rxdc = rf_rxdc*[1 1 1 1];
%rf_vcocal=rf_vcocal_859*[1 1 1 1];
rf_vcocal=rf_vcocal_19G*[1 1 1 1];
@@ -23,10 +21,11 @@ eNBflag = 0;
tdd_config = DUPLEXMODE_FDD + TXRXSWITCH_TESTRX;
%tdd_config = DUPLEXMODE_FDD + TXRXSWITCH_LSB;
syncmode = SYNCMODE_FREE;
rffe_rxg_low = 61*active_rf;
rffe_rxg_final = 61*active_rf;
rffe_rxg_low = 63*active_rf;
rffe_rxg_final = 31*active_rf;
rffe_band = B19G_TDD*active_rf;
autocal = [1 1 1 1];
autocal = [1 1 1 1];
oarf_config_exmimo(card,freq_rx,freq_tx,tdd_config,syncmode,rx_gain,tx_gain,eNBflag,rf_mode,rf_rxdc,rf_local,rf_vcocal,rffe_rxg_low,rffe_rxg_final,rffe_band,autocal)
targets/ARCH/EXMIMO/USERSPACE/OCTAVE/txsig.m
+22 -18
View File
@@ -2,36 +2,39 @@
fc = 1907600000;
%fc = 859.5e6;
rxgain=30;
rxgain=0;
txgain=25;
eNB_flag = 0;
card = 0;
%chan_sel = zeros(1,4);
%chan_sel(ch) = 1;
chan_sel = [1 0 0 0];
limeparms;
rf_mode = (RXEN+TXEN+TXLPFNORM+TXLPFEN+TXLPF25+RXLPFNORM+RXLPFEN+RXLPF25+LNA1ON+LNAMax+RFBBNORM) * [1 1 1 1];
rf_mode = rf_mode + (DMAMODE_TX)*[1 1 1 1];
rf_mode = (RXEN+TXEN+TXLPFNORM+TXLPFEN+TXLPF25+RXLPFNORM+RXLPFEN+RXLPF25+LNA1ON+LNAMax+RFBBNORM) * chan_sel;
rf_mode = rf_mode + (DMAMODE_TX)*chan_sel;
%rf_mode = RXEN+TXEN+TXLPFNORM+TXLPFEN+TXLPF25+RXLPFNORM+RXLPFEN+RXLPF25+LNA1ON+LNAByp+RFBBLNA1;
%rf_local= [8253704 8253704 8257340 8257340]; %eNB2tx %850MHz
%rf_local= [8255004 8253440 8257340 8257340]; % ex2 700 MHz
rf_local = [8254744 8255063 8257340 8257340]; %eNB2tx 1.9GHz
%rf_local = [8257292 8257300 8257340 8257340]; %ex2 850 MHz
%rf_local = rf_local * ones(1,4);
rf_rxdc = rf_rxdc * ones(1,4);
%rf_vcocal = rf_vcocal_859 * ones(1,4);
rf_vcocal = rf_vcocal_19G * ones(1,4);
%rf_vcocal = rf_vcocal_26G_eNB * ones(1,4);
rxgain = rxgain*ones(1,4);
txgain = txgain*ones(1,4);
freq_tx = fc*[1 1 1 1];
%rf_local = rf_local * chan_sel;
rf_rxdc = rf_rxdc * chan_sel;
%rf_vcocal = rf_vcocal_859 * chan_sel;
rf_vcocal = rf_vcocal_19G * chan_sel;
%rf_vcocal = rf_vcocal_26G_eNB * chan_sel;
rxgain = rxgain*chan_sel;
txgain = txgain*chan_sel;
freq_tx = fc*chan_sel;
freq_rx = freq_tx;
%freq_rx = freq_tx-120000000*[1 1 1 1];
%freq_rx = freq_tx-120000000*chan_sel;
%freq_tx = freq_rx+1920000;
tdd_config = DUPLEXMODE_FDD + TXRXSWITCH_TESTTX;
syncmode = SYNCMODE_FREE;
rffe_rxg_low = 61*[1 1 1 1];
rffe_rxg_final = 61*[1 1 1 1];
rffe_band = B19G_TDD*[1 1 1 1];
autocal = [1 1 1 1];
rffe_rxg_low = 61*chan_sel;
rffe_rxg_final = 61*chan_sel;
rffe_band = B19G_TDD*chan_sel;
autocal = chan_sel;
oarf_config_exmimo(card, freq_rx,freq_tx,tdd_config,syncmode,rxgain,txgain,eNB_flag,rf_mode,rf_rxdc,rf_local,rf_vcocal,rffe_rxg_low,rffe_rxg_final,rffe_band,autocal);
amp = pow2(14)-1;
@@ -56,7 +59,7 @@ case 2
case 3
for i=0:(12*5-1)
s((38401+640*i):(38400+640*(i+1)),1)=floor(linspace(-127,128,640)); %+1j*floor(linspace(128,-127,640));
end
end
case 4
pss0_f0=[0,0,0,0,0,0,0,0,0,0,32767,0,-26120,-19785,11971,-30502,-24020,-22288,32117,6492,31311,9658,-16384,-28378,25100,-21063,-7292,-31946,20429,25618,14948,29158,11971,-30502,31311,9658,25100,-21063,-16384,28377,-24020,22287,32117,6492,-7292,31945,20429,25618,-26120,-19785,-16384,-28378,-16384,28377,-26120,-19785,-32402,4883,31311,-9659,32117,6492,-7292,-31946,32767,-1,25100,-21063,-24020,22287,-32402,4883,-32402,4883,-24020,22287,25100,-21063,32767,-1,-7292,-31946,32117,6492,31311,-9659,-32402,4883,-26120,-19785,-16384,28377,-16384,-28378,-26120,-19785,20429,25618,-7292,31945,32117,6492,-24020,22287,-16384,28377,25100,-21063,31311,9658,11971,-30502,14948,29158,20429,25618,-7292,-31946,25100,-21063,-16384,-28378,31311,9658,32117,6492,-24020,-22288,11971,-30502,-26120,-19785,32767,0,0,0,0,0,0,0,0,0,0,0];
@@ -86,9 +89,10 @@ sleep (1)
%keyboard
oarf_send_frame(card,s,n_bit);
%r = oarf_get_frame(card);
figure(1)
hold off
plot(real(s(:,1)),'r')
hold on
plot(imag(s(:,2)),'b')
hold off
targets/PROJECTS/TDDREC/initparams.m
+2 -2
View File
@@ -15,8 +15,8 @@ eNB_flag = 0;
card = 0;
Ntrx=4;
dual_tx=0;
active_rfA=[1 0 0 0];
active_rfB=[0 1 1 1];
active_rfA=[1 1 0 0];
active_rfB=[0 0 1 1];
active_rf=active_rfA+active_rfB;
if(active_rfA*active_rfB'!=0) error("The A and B transceive chains must be orthogonal./n") endif
targets/RTAI/USER/.runinfo
+2 -2
View File
@@ -7,9 +7,9 @@ eNB_test:lxrt+sem+mbx+msg+smi:!sudo ./lte-softmodem -S -F enb2tx;sleep 1;popall:
UE:lxrt+sem+mbx+msg+fifos:!sudo ./synctest -U -d -T 108;sleep 1;popall:control_c
#UE0:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907602944 -V;sleep 1;popall:control_c
#EXMIMO2 card 1
#UE0:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907600480 -V;sleep 1;popall:control_c
UE0:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907600480 -V;sleep 1;popall:control_c
#EXMIMO2 card 5
UE0:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907597440 -V;sleep 1;popall:control_c
#UE0:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907597240 -V;sleep 1;popall:control_c
UE0_smbv:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 1907598252 -V;sleep 1;popall:control_c
UE850:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -U -d -C 859498000 -F ex2_850;sleep 1;popall:control_c
eNB850:lxrt+sem+mbx+msg+fifos:!sudo ./lte-softmodem -d -C 859500000 -F ex2_850;sleep 1;popall:control_c
targets/RTAI/USER/Makefile
+1 -1
View File
@@ -104,7 +104,7 @@ ifeq ($(OPENAIR2),1)
ASN1_MSG_OBJS1=$(addprefix $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/, $(ASN1_MSG_OBJS))
OBJ += $(L2_OBJS) $(LIST_OBJ) $(TIMER_OBJ) $(MEM_OBJ) $(OTG_OBJS) $(MATH_OBJS)
OBJ += $(OPENAIR1_DIR)/SIMULATION/ETH_TRANSPORT/netlink_init.o
OBJ += $(PDCP_DIR)/pdcp_thread.o
#OBJ += $(PDCP_DIR)/pdcp_thread.o
CFLAGS += -DOPENAIR2 -DNO_RRM -DPUCCH -DMAC_CONTEXT=1
endif
targets/RTAI/USER/lte-softmodem.c
+26 -8
View File
@@ -171,7 +171,8 @@ int otg_enabled;
#endif
int number_of_cards = 1;
int mbox_bounds[20] = {8,16,24,30,38,46,54,60,68,76,84,90,98,106,114,120,128,136,144, 0}; ///boundaries of slots in terms ob mbox counter rounded up to even numbers
//int mbox_bounds[20] = {8,16,24,30,38,46,54,60,68,76,84,90,98,106,114,120,128,136,144, 0}; ///boundaries of slots in terms ob mbox counter rounded up to even numbers
int mbox_bounds[20] = {6,14,22,28,36,44,52,58,66,74,82,88,96,104,112,118,126,134,142, 148}; ///boundaries of slots in terms ob mbox counter rounded up to even numbers
int init_dlsch_threads(void);
void cleanup_dlsch_threads(void);
@@ -956,6 +957,7 @@ int main(int argc, char **argv) {
char line[1000];
int l;
int ret, ant;
int ant_offset=0;
int error_code;
@@ -1135,7 +1137,7 @@ int main(int argc, char **argv) {
}
else { //UE_flag==1
frame_parms->nb_antennas_tx = 1;
frame_parms->nb_antennas_rx = 1;
frame_parms->nb_antennas_rx = 2;
}
frame_parms->nb_antennas_tx_eNB = (transmission_mode == 1) ? 1 : 2; //initial value overwritten by initial sync later
frame_parms->mode1_flag = (transmission_mode == 1) ? 1 : 0;
@@ -1347,6 +1349,7 @@ int main(int argc, char **argv) {
p_exmimo_config->framing.tdd_config = DUPLEXMODE_FDD + TXRXSWITCH_LSB;
p_exmimo_config->framing.resampling_factor = 2;
for (ant=0;ant<max(frame_parms->nb_antennas_tx,frame_parms->nb_antennas_rx);ant++)
p_exmimo_config->rf.rf_mode[ant] = rf_mode_base;
for (ant=0;ant<frame_parms->nb_antennas_tx;ant++)
@@ -1358,6 +1361,21 @@ int main(int argc, char **argv) {
carrier_freq[ant] = 0; //this turns off all other LIMEs
}
/*
ant_offset = 3;
for (ant=0; ant<4; ant++) {
if (ant==ant_offset) {
p_exmimo_config->rf.rf_mode[ant] = rf_mode_base;
p_exmimo_config->rf.rf_mode[ant] += (TXEN + DMAMODE_TX);
p_exmimo_config->rf.rf_mode[ant] += (RXEN + DMAMODE_RX);
}
else {
p_exmimo_config->rf.rf_mode[ant] = 0;
carrier_freq[ant] = 0; //this turns off all other LIMEs
}
}
*/
for (ant = 0; ant<4; ant++) {
p_exmimo_config->rf.do_autocal[ant] = 1;
p_exmimo_config->rf.rf_freq_rx[ant] = carrier_freq[ant];
@@ -1383,8 +1401,8 @@ int main(int argc, char **argv) {
p_exmimo_config->rf.rffe_gain_txlow[ant] = 31;
p_exmimo_config->rf.rffe_gain_txhigh[ant] = 31;
p_exmimo_config->rf.rffe_gain_rxfinal[ant] = 31;
p_exmimo_config->rf.rffe_gain_rxlow[ant] = 63;
p_exmimo_config->rf.rffe_gain_rxfinal[ant] = 52;
p_exmimo_config->rf.rffe_gain_rxlow[ant] = 31;
}
@@ -1424,7 +1442,7 @@ int main(int argc, char **argv) {
#endif
#ifdef OPENAIR2
init_pdcp_thread();
//init_pdcp_thread();
#endif
number_of_cards = openair0_num_detected_cards;
@@ -1435,7 +1453,7 @@ int main(int argc, char **argv) {
// connect the TX/RX buffers
if (UE_flag==1) {
setup_ue_buffers(PHY_vars_UE_g[0],frame_parms,0);
setup_ue_buffers(PHY_vars_UE_g[0],frame_parms,ant_offset);
printf("Setting UE buffer to all-RX\n");
// Set LSBs for antenna switch (ExpressMIMO)
for (i=0; i<frame_parms->samples_per_tti*10; i++)
@@ -1445,7 +1463,7 @@ int main(int argc, char **argv) {
//p_exmimo_config->framing.tdd_config = TXRXSWITCH_TESTRX;
}
else {
setup_eNB_buffers(PHY_vars_eNB_g[0],frame_parms,0);
setup_eNB_buffers(PHY_vars_eNB_g[0],frame_parms,ant_offset);
if (fs4_test==0)
{
printf("Setting eNB buffer to all-RX\n");
@@ -1702,7 +1720,7 @@ int main(int argc, char **argv) {
}
#ifdef OPENAIR2
cleanup_pdcp_thread();
//cleanup_pdcp_thread();
#endif
#ifdef RTAI
targets/RTAI/USER/sched_dlsch.c
+4 -2
View File
@@ -232,14 +232,16 @@ static void * dlsch_thread(void *param) {
phy_vars_ue->total_received_bits[eNB_id] = phy_vars_ue->total_received_bits[eNB_id] + phy_vars_ue->dlsch_ue[eNB_id][0]->harq_processes[harq_pid]->TBS;
}
}
// this is done in main thread
/*
if (phy_vars_ue->frame % 100 == 0) {
if ((phy_vars_ue->dlsch_received[eNB_id] - phy_vars_ue->dlsch_received_last[eNB_id]) != 0)
phy_vars_ue->dlsch_fer[eNB_id] = (100*(phy_vars_ue->dlsch_errors[eNB_id] - phy_vars_ue->dlsch_errors_last[eNB_id]))/(phy_vars_ue->dlsch_received[eNB_id] - phy_vars_ue->dlsch_received_last[eNB_id]);
phy_vars_ue->dlsch_errors_last[eNB_id] = phy_vars_ue->dlsch_errors[eNB_id];
phy_vars_ue->dlsch_received_last[eNB_id] = phy_vars_ue->dlsch_received[eNB_id];
}
*/
time_out = rt_get_time_ns();
targets/RTAI/USER/sched_rx_pdsch.c
+8 -4
View File
@@ -170,10 +170,14 @@ static void * rx_pdsch_thread(void *param) {
if ((phy_vars_ue->transmission_mode[eNB_id] == 5) &&
(phy_vars_ue->dlsch_ue[eNB_id][0]->harq_processes[harq_pid]->dl_power_off==0) &&
(openair_daq_vars.use_ia_receiver ==1)) {
dual_stream_UE = 1;
eNB_id_i = phy_vars_ue->n_connected_eNB;
i_mod = get_Qm(phy_vars_ue->dlsch_ue[eNB_id][0]->harq_processes[harq_pid]->mcs);
(openair_daq_vars.use_ia_receiver > 0)) {
dual_stream_UE = 1;
eNB_id_i = phy_vars_ue->n_connected_eNB;
if (openair_daq_vars.use_ia_receiver == 2) {
i_mod = get_Qm(((phy_vars_ue->frame%1024)/3)%28);
} else {
i_mod = get_Qm(phy_vars_ue->dlsch_ue[eNB_id][0]->harq_processes[harq_pid]->mcs);
}
}
else {
dual_stream_UE = 0;