diff --git a/targets/PROJECTS/CORRIDOR/emos_read_v2.m b/targets/PROJECTS/CORRIDOR/emos_read_v2.m
index 0ae8d90c23..eea23be1e7 100644
--- a/targets/PROJECTS/CORRIDOR/emos_read_v2.m
+++ b/targets/PROJECTS/CORRIDOR/emos_read_v2.m
@@ -1,7 +1,7 @@
 close all
 clear all
 
-enable_plots=2; %eanbles figures
+enable_plots=1; %eanbles figures
 
 %% preload and init data
 addpath('../../../openair1/PHY/LTE_REFSIG');
@@ -16,49 +16,48 @@ frame_length = ofdm_symbol_length*num_symbols_frame;
 useful_carriers = num_carriers-num_zeros-1;
 
 %filename = 'E:\EMOS\corridor\lab tests\eNB_data_20140321_184441.EMOS';
-filename = 'E:\EMOS\corridor\711MHz\eNB_data_20140324_113931.EMOS';
-%filename = 'D:\trials1 day 1 771.5MHz\eNB_data_20140327_153151.EMOS';
-destdir = 'E:\EMOS\corridor\trials1 day1\711.5MHz';
+filename = 'D:\trials1 train extracted\eNB_data_20140331_UHF_run1.EMOS';
+destdir = 'E:\EMOS\corridor\trials1 train';
 
 samples_slot = 7680/2;
 slots_per_frame = 20;
 nframes = 100;
-nant=3;
+nant_rx=3;
+nant_tx=4;
 
 d = dir(filename);
-nblocks = floor(d.bytes/(samples_slot*slots_per_frame*nframes*nant*4));
-PDP_total = zeros(nblocks*nframes,useful_carriers/4);
+nblocks = floor(d.bytes/(samples_slot*slots_per_frame*nframes*nant_rx*4));
+PDP_total = zeros(nblocks*nframes,useful_carriers/4,nant_tx,nant_rx);
 
 %% main loop
 fid = fopen(filename,'r');
+% advance 1 minute of measurements (the synchronization algorithm does not
+% work so well for low SNR yet)
+fseek(fid,samples_slot*slots_per_frame*nframes*nant_rx*60*2,'bof'); 
 
-vStorage = [];  %%
-
+vStorage = []; 
 block = 1;
-start=2;
 
 while ~feof(fid)
     fprintf(1,'Processing block %d of %d',block,nblocks);
     
-    [v,c]=fread(fid, samples_slot*slots_per_frame*nframes*nant*2, 'int16',0,'ieee-le');
+    [v,c]=fread(fid, samples_slot*slots_per_frame*nframes*nant_rx*2, 'int16',0,'ieee-le');
     if (c==0)
         break
     end
     v1 = double(v(1:2:end))+1j*double(v(2:2:end));
     
-    nframes = 100;
-    
-    v2 = zeros(samples_slot*slots_per_frame*nframes,nant);
+    v2 = zeros(samples_slot*slots_per_frame*nframes,nant_rx);
     for slot=1:slots_per_frame*nframes
-        for a=1:nant
+        for a=1:nant_rx
             v2((slot-1)*samples_slot+1:slot*samples_slot,a) = ...
-                v1((slot-1)*samples_slot*nant+(a-1)*samples_slot+1:...
-                   (slot-1)*samples_slot*nant+ a   *samples_slot,1);
+                v1((slot-1)*samples_slot*nant_rx+(a-1)*samples_slot+1:...
+                   (slot-1)*samples_slot*nant_rx+ a   *samples_slot,1);
         end
     end
 
     
-    v2 = [vStorage; v2] ;%%
+    v2 = [vStorage; v2] ; %handle boundaries between blocks
     if size(v2,1) > frame_length*nframes ;
         nframes = floor(size(v2,1) / frame_length) ;
     vStorage = v2(frame_length*nframes+1:end,:) ;
@@ -71,8 +70,8 @@ while ~feof(fid)
         plot(20*log10(abs(fftshift(fft(v2)))))
     end
     
-    %% frame start detection
-    % if block==1 
+    %% frame start detection 
+    if block==1 
         [corr,lag] = xcorr(v2(:,1),pss_t);
         %[m,idx]=max(abs(corr));
         %[m,idx]=peaksfinder(corr,frame_length);
@@ -80,7 +79,7 @@ while ~feof(fid)
         tmp   = corr(nframes*slots_per_frame*samples_slot:end);
         tmp2  = reshape(tmp,slots_per_frame*samples_slot,nframes);
         [m,idx] = max(abs(tmp2),[],1);
-        frame_offset = round(mean(idx)) - prefix_length;
+        frame_offset = round(mean(idx(1:10))) - prefix_length;
 
         if enable_plots>=2
             figure(2);
@@ -89,32 +88,45 @@ while ~feof(fid)
             hold on
             plot(frame_offset,m(1),'ro')
         end
-    
-       
-    
-    % end
+    else
+        % after the first block we are synchronized
+        frame_offset = prefix_length/8;
+    end
     
     %%
-    for i=start:nframes;
+    for i=1:nframes;
         fprintf(1,'.');
         frame_start = (slots_per_frame*samples_slot)*(i-1)+frame_offset+1;
         %frame_start = lag(idx(i))-prefix_length;
         % frame_start = lag(i) - prefix_length;
         
-        
         if i<nframes
             %% ofdm receiver
             received_f = OFDM_RX(v2(frame_start:frame_start+frame_length,:),num_carriers,useful_carriers,prefix_length,num_symbols_frame);
         else
-            vStorage = [v2(frame_start:end,:) ; vStorage];  %%
+            vStorage = [v2(frame_start:end,:) ; vStorage];  % handle block boundaries
+        end
+        %% MIMO channel estimation
+        H = zeros(num_symbols_frame/2,useful_carriers/4,nant_tx,nant_rx);
+        for itx=1:nant_tx
+            % f_start and t_start indicate the start of the pilots in time
+            % and frequency according to the specifications (see .doc file). 
+            % t_start has to be >=2, since the first symbol is the PSS.
+            f_start = mod(itx-1,2)*2+1;
+            t_start = floor((itx-1)/2)+1;
+            for irx=1:nant_rx
+                H(:,:,itx,irx)=conj(squeeze(f3(itx,t_start:2:end,f_start:4:end))).*received_f(t_start:2:end,f_start:4:end,irx);
+            end
         end
-        %% channel estimation
-        H=conj(squeeze(f3(1,3:2:end,1:4:end))).*received_f(3:2:end,1:4:end,1);
         Ht = ifft(H,[],2);
         PDP = mean(abs(Ht).^2,1);
-        PDP_total((block-1)*nframes+i+1,:) = PDP;
+        PDP_all = squeeze(mean(mean(PDP,3),4));
+        PDP_total((block-1)*nframes+i+1,:,:,:) = PDP;
         
-        [m,idx] = max(fft(ifft(PDP),num_carriers));
+        % adjust frame offset base on channel estimate to compensate for
+        % timing drift. We try to keep the peak of the impulse response at
+        % sample prefix_length/8.
+        [m,idx] = max(fft(ifft(PDP_all),num_carriers));
         offset = idx - prefix_length/8;
         if offset > prefix_length
             offset = offset - num_carriers;
@@ -125,15 +137,28 @@ while ~feof(fid)
         
         if enable_plots>=1
             figure(3)
-            surf(20*log10(abs(Ht)))
-            xlabel('delay time [samples]')
-            ylabel('time [OFDM symbol]')
-            zlabel('power [dB]')
-            shading interp
+            for itx=1:nant_tx
+                for irx=1:nant_rx
+                    subplot(nant_tx,nant_rx,(itx-1)*nant_rx + irx);
+                    surf(20*log10(abs(Ht(:,:,itx,irx))))
+                    %xlabel('time [OFDM symbol]')
+                    %ylabel('delay time [samples]')
+                    %zlabel('power [dB]')
+                    shading interp
+                end
+            end
             figure(4)
-            plot(10*log10(PDP))
-            xlabel('delay time [samples]')
-            ylabel('power [dB]')
+            for itx=1:nant_tx
+                for irx=1:nant_rx
+                    subplot(nant_tx,nant_rx,(itx-1)*nant_rx + irx);
+                    plot(10*log10(PDP(:,:,itx,irx)))
+                    ylim([50 80])
+                    xlim([0 75])
+                    %xlabel('delay time [samples]')
+                    %ylabel('power [dB]')
+                end
+            end
+            drawnow
         end
         
     end