diff --git a/cmake_targets/autotests/README.txt b/cmake_targets/autotests/README.txt index 8f6136c546..8549f54221 100644 --- a/cmake_targets/autotests/README.txt +++ b/cmake_targets/autotests/README.txt @@ -97,27 +97,45 @@ Obj.# Case# Test# Description 01 51 06 mbmssim (TBD) -01 55 lte-softmodem tests with USRP B210 RF as eNB and ALU EPC w/ Bandrich COTS UE for `TX/1RX, 1TX/2RX, 2TX/1RX 2TX/2RX +01 55 lte-softmodem tests with USRP B210 RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX, 2TX/2RX 01 55 00 Band 7 FDD 5MHz UL Throughput for 60 sec for 1TX/1RX -01 55 00 Band 7 FDD 10MHz UL Throughput for 60 sec -01 55 00 Band 7 FDD 20MHz UL Throughput for 60 sec -01 55 00 Band 7 FDD 5MHz DL Throughput for 60 sec -01 55 00 Band 7 FDD 10MHz DL Throughput for 60 sec -01 55 00 Band 7 FDD 20MHz DL Throughput for 60 sec - +01 55 01 Band 7 FDD 10MHz UL Throughput for 60 sec for 1TX/1RX +01 55 02 Band 7 FDD 20MHz UL Throughput for 60 sec for 1TX/1RX +01 55 03 Band 7 FDD 5MHz DL Throughput for 60 sec for 1TX/1RX +01 55 04 Band 7 FDD 10MHz DL Throughput for 60 sec for 1TX/1RX +01 55 05 Band 7 FDD 20MHz DL Throughput for 60 sec for 1TX/1RX +01 55 06 Band 7 FDD 5MHz UL Throughput for 60 sec for 2TX/2RX +01 55 07 Band 7 FDD 10MHz UL Throughput for 60 sec for 2TX/2RX +01 55 08 Band 7 FDD 20MHz UL Throughput for 60 sec for 2TX/2RX +01 55 09 Band 7 FDD 5MHz DL Throughput for 60 sec for 2TX/2RX +01 55 10 Band 7 FDD 10MHz DL Throughput for 60 sec for 2TX/2RX +01 55 11 Band 7 FDD 20MHz DL Throughput for 60 sec for 2TX/2RX 01 56 lte-softmodem tests with USRP B210 RF as eNB and OAI EPC (eNB and EPC are on same machines) w/ Bandrich COTS UE 01 57 lte-softmodem tests with USRP B210 RF as eNB and OAI EPC (eNB and EPC are on different machines) w/ Bandrich COTS UE -01 58 lte-softmodem tests with USRP X310 RF as eNB and ALU EPC w/ Bandrich COTS UE for `TX/1RX, 1TX/2RX, 2TX/1RX 2TX/2RX +01 58 lte-softmodem tests with USRP X310 RF as eNB and ALU EPC w/ Bandrich COTS UE for `TX/1RX, 2TX/2RX +01 58 00 Band 7 FDD 5MHz UL Throughput for 60 sec for 1TX/1RX +01 58 01 Band 7 FDD 10MHz UL Throughput for 60 sec for 1TX/1RX +01 58 02 Band 7 FDD 20MHz UL Throughput for 60 sec for 1TX/1RX +01 58 03 Band 7 FDD 5MHz DL Throughput for 60 sec for 1TX/1RX +01 58 04 Band 7 FDD 10MHz DL Throughput for 60 sec for 1TX/1RX +01 58 05 Band 7 FDD 20MHz DL Throughput for 60 sec for 1TX/1RX 01 59 lte-softmodem tests with USRP X310 RF as eNB and OAI EPC (eNB and EPC are on same machines) w/ Bandrich COTS UE 01 61 lte-softmodem tests with USRP X310 RF as eNB and OAI EPC (eNB and EPC are on different machines) w/ Bandrich COTS UE -01 61 lte-softmodem tests with EXMIMO RF as eNB and ALU EPC w/ Bandrich COTS UE +01 61 lte-softmodem tests with EXMIMO RF as eNB and ALU EPC w/ Bandrich COTS UE for `TX/1RX, 2TX/2RX +01 61 00 Band 7 FDD 5MHz UL Throughput for 60 sec for 1TX/1RX +01 61 01 Band 7 FDD 10MHz UL Throughput for 60 sec for 1TX/1RX +01 61 02 Band 7 FDD 20MHz UL Throughput for 60 sec for 1TX/1RX +01 61 03 Band 7 FDD 5MHz DL Throughput for 60 sec for 1TX/1RX +01 61 04 Band 7 FDD 10MHz DL Throughput for 60 sec for 1TX/1RX +01 61 05 Band 7 FDD 20MHz DL Throughput for 60 sec for 1TX/1RX + 01 62 lte-softmodem tests with EXMIMO RF as eNB and OAI EPC (eNB and EPC are on same machines) w/ Bandrich COTS UE 01 63 lte-softmodem tests with EXMIMO RF as eNB and OAI EPC (eNB and EPC are on different machines) w/ Bandrich COTS UE diff --git a/cmake_targets/autotests/run_exec_autotests.bash b/cmake_targets/autotests/run_exec_autotests.bash index a447ac3b93..836a8c197a 100755 --- a/cmake_targets/autotests/run_exec_autotests.bash +++ b/cmake_targets/autotests/run_exec_autotests.bash @@ -400,12 +400,13 @@ else fi tmpfile=`mktemp` -echo \'$passwd\' | sudo echo $HOME >& $tmpfile +echo \'$passwd\' | $SUDO echo $HOME >& $tmpfile tstsudo=`cat $tmpfile` if [ "$tstsudo" != "$HOME" ]; then - echo "User might not have sudo privileges. Exiting" - echo "tstsudo = $tstsudo" + echo "$USER might not have sudo privileges. Exiting" exit +else + echo "$USER has sudo privileges" fi echo "tstsudo = $tstsudo" rm -fr $tmpfile @@ -495,6 +496,7 @@ for search_expr in "${test_case_array[@]}" if [ "$class" == "compilation" ]; then test_compile "$name" "$compile_prog" "$compile_prog_args" "$pre_exec" "$pre_exec_args" "$main_exec" "$main_exec_args" "search_array_true[@]" "$search_expr_false" "$nruns" "$pre_compile_prog" "$class" "$compile_prog_out" "$tags" elif [ "$class" == "execution" ]; then + $SUDO killall -q oaisim_nos1 test_compile_and_run "$name" "$compile_prog" "$compile_prog_args" "$pre_exec" "$pre_exec_args" "$main_exec" "$main_exec_args" "search_array_true[@]" "$search_expr_false" "$nruns" "$pre_compile_prog" "$class" "$compile_prog_out" "$tags" "$mypassword" else echo "Unexpected class of test case...Skipping the test case $name ...." diff --git a/cmake_targets/autotests/run_exec_lte-softmodem_tests.py b/cmake_targets/autotests/run_exec_lte-softmodem_tests.py index 4bbe55e285..6f14cf63f3 100644 --- a/cmake_targets/autotests/run_exec_lte-softmodem_tests.py +++ b/cmake_targets/autotests/run_exec_lte-softmodem_tests.py @@ -81,8 +81,8 @@ def write_file(filename, string, mode="w"): #$5 minimum duration of throughput #The throughput values found in file must be higher than values from from 2,3,4,5 #The function returns True if throughput conditions are saisfied else it returns fails - def tput_test(filename, min_tput, max_tput, average, min_duration): + if os.path.exists(filename): with open (filename, "r") as myfile: data=myfile.read() @@ -98,13 +98,13 @@ def tput_test(filename, min_tput, max_tput, average, min_duration): min_list = 0 max_list = 0 average_list=0 - + tput_string=' ( '+ "min=%0.2f" % min_list + ' Mbps / ' + "max=%0.2f" % max_list + ' Mbps / ' + "avg=%0.2f" % average_list + ' Mbps / ' + "dur=%0.2f" % duration + ' s) ' if (min_list >= min_tput and max_list >= max_tput and average_list >= average and duration >= min_duration): - return True + return True , tput_string else: - return False + return False , tput_string else: - return False + return False , tput_string def try_convert_to_float(string, fail=None): @@ -115,6 +115,7 @@ def try_convert_to_float(string, fail=None): def tput_test_search_expr (search_expr, logfile_traffic): result=0 + tput_string='' if search_expr !='': if search_expr.find('throughput_test')!= -1 : p= re.compile('min\s*=\s*(\d*.\d*)\s*Mbits/sec') @@ -151,9 +152,11 @@ def tput_test_search_expr (search_expr, logfile_traffic): duration = try_convert_to_float(duration) if (min_tput != None and max_tput != None and avg_tput != None and duration != None ): - result = tput_test(logfile_traffic, min_tput, max_tput, avg_tput, duration) - return result + result, tput_string = tput_test(logfile_traffic, min_tput, max_tput, avg_tput, duration) + else: + result=1 + return result, tput_string def sftp_module (username, password, hostname, ports, paramList,logfile): @@ -372,7 +375,7 @@ class testCaseThread_generic (threading.Thread): except Exception, e: error='' error = error + ' In Class = testCaseThread_generic, function: ' + sys._getframe().f_code.co_name + ': *** Caught exception: ' + str(e.__class__) + " : " + str( e) - error = error + '\n threadID = ' + str(self.threadID) + '\n threadName = ' + self.name + '\n testcasename = ' + self.testcasename + '\n machine = ' + self.machine + '\n logdirOAI5GRepo = ' + self.logdirOAI5GRepo + '\n' + '\n timeout = ' + str(timeout) + error = error + '\n threadID = ' + str(self.threadID) + '\n threadName = ' + self.name + '\n testcasename = ' + self.testcasename + '\n machine = ' + self.machine + '\n logdirOAI5GRepo = ' + self.logdirOAI5GRepo + '\n' + '\n timeout = ' + str(self.timeout) error = error + traceback.format_exc() print error sys.exit() @@ -492,6 +495,7 @@ def handle_testcaseclass_softmodem (testcase, oldprogramList, logdirOAI5GRepo , UE_traffic_exec_args = testcase.findtext('UE_traffic_exec_args',default='') UE_terminate_missing_procs = testcase.findtext('UE_terminate_missing_procs',default='True') UE_search_expr_true = testcase.findtext('UE_search_expr_true','') + UE_stop_script = testcase.findtext('UE_stop_script','') EPCMachine = testcase.findtext('EPC',default='') EPC_config_file = testcase.findtext('EPC_config_file',default='') @@ -573,6 +577,7 @@ def handle_testcaseclass_softmodem (testcase, oldprogramList, logdirOAI5GRepo , logfile_task_eNB_compile = logdir_local_testcase + '/eNB_task_compile' + '_' + str(run) + '_.log' logfile_task_eNB_out = logdir_eNB + '/eNB_task_out' + '_' + str(run) + '_.log' logfile_task_eNB = logdir_local_testcase + '/eNB_task' + '_' + str(run) + '_.log' + logfile_local_traffic_eNB_out = logdir_local_testcase + '/eNB_traffic' + '_' + str(run) + '_.log' task_eNB_compile = ' ( uname -a ; date \n' task_eNB_compile = task_eNB_compile + 'cd ' + logdirOAI5GRepo + ' ; source oaienv ; source cmake_targets/tools/build_helper \n' @@ -613,6 +618,7 @@ def handle_testcaseclass_softmodem (testcase, oldprogramList, logdirOAI5GRepo , logfile_task_UE = logdir_local_testcase + '/UE_task' + '_' + str(run) + '_.log' logfile_task_UE_compile_out = logdir_UE + '/UE_task_compile_out' + '_' + str(run) + '_.log' logfile_task_UE_compile = logdir_local_testcase + '/UE_task_compile' + '_' + str(run) + '_.log' + logfile_local_traffic_UE_out = logdir_local_testcase + '/UE_traffic' + '_' + str(run) + '_.log' task_UE_compile = ' ( uname -a ; date \n' task_UE_compile = task_UE_compile + 'array_exec_pid=()' + '\n' @@ -660,6 +666,7 @@ def handle_testcaseclass_softmodem (testcase, oldprogramList, logdirOAI5GRepo , logfile_task_EPC = logdir_local_testcase + '/EPC_task' + '_' + str(run) + '_.log' logfile_task_EPC_compile_out = logdir_EPC + '/EPC_task_compile_out' + '_' + str(run) + '_.log' logfile_task_EPC_compile = logdir_local_testcase + '/EPC_task_compile' + '_' + str(run) + '_.log' + logfile_local_traffic_EPC_out = logdir_local_testcase + '/EPC_traffic' + '_' + str(run) + '_.log' task_EPC_compile = ' ( uname -a ; date \n' task_EPC_compile = task_EPC_compile + 'array_exec_pid=()' + '\n' @@ -737,6 +744,20 @@ def handle_testcaseclass_softmodem (testcase, oldprogramList, logdirOAI5GRepo , cleanOldPrograms(oai_eNB, oldprogramList, CleanUpAluLteBox) cleanOldPrograms(oai_UE, oldprogramList, CleanUpAluLteBox) cleanOldPrograms(oai_EPC, oldprogramList, CleanUpAluLteBox) + logfile_UE_stop_script_out = logdir_UE + '/UE_stop_script_out' + '_' + str(run) + '_.log' + logfile_UE_stop_script = logdir_local_testcase + '/UE_stop_script' + '_' + str(run) + '_.log' + + if UE_stop_script != "": + cmd = ' ( uname -a ; date \n' + cmd = cmd + 'cd ' + logdirOAI5GRepo + ' ; source oaienv ; source cmake_targets/tools/build_helper \n' + cmd = cmd + 'env |grep OPENAIR \n' + 'array_exec_pid=() \n' + cmd = cmd + UE_stop_script + '\n' + cmd = cmd + ') > ' + logfile_UE_stop_script_out + ' 2>&1 ' + write_file(logfile_UE_stop_script , cmd, mode="w") + thread_UE = oaiThread(4, "UE_thread", UEMachine, user, password , cmd, False, timeout_thread) + thread_UE.start() + thread_UE.join() + print "Copying files from EPCMachine : " + EPCMachine + "logdir_EPC = " + logdir_EPC ssh = SSHSession(EPCMachine , username=user, key_file=None, password=password) @@ -751,17 +772,23 @@ def handle_testcaseclass_softmodem (testcase, oldprogramList, logdirOAI5GRepo , ssh.get_all(logdir_UE , logdir_local + '/cmake_targets/autotests/log/'+ testcasename) #Currently we only perform throughput tests - result = tput_test_search_expr(eNB_search_expr_true, logfile_traffic_eNB) + tput_run_string='' + result, tput_string = tput_test_search_expr(eNB_search_expr_true, logfile_local_traffic_eNB_out) + tput_run_string = tput_run_string + tput_string run_result=run_result&result - result = tput_test_search_expr(EPC_search_expr_true, logfile_traffic_EPC) + result, tput_string = tput_test_search_expr(EPC_search_expr_true, logfile_local_traffic_EPC_out) run_result=run_result&result - result = tput_test_search_expr(UE_search_expr_true, logfile_traffic_UE) + tput_run_string = tput_run_string + tput_string + result, tput_string = tput_test_search_expr(UE_search_expr_true, logfile_local_traffic_UE_out) run_result=run_result&result + tput_run_string = tput_run_string + tput_string if run_result == 1: - run_result_string = 'RUN_'+str(run) + ' = PASS' + run_result_string = ' RUN_'+str(run) + ' = PASS' else: - run_result_string = 'RUN_'+str(run) + ' = FAIL' + run_result_string = ' RUN_'+str(run) + ' = FAIL' + + run_result_string = run_result_string + tput_run_string test_result=test_result & run_result test_result_string=test_result_string + run_result_string @@ -775,12 +802,12 @@ def handle_testcaseclass_softmodem (testcase, oldprogramList, logdirOAI5GRepo , #Now we finalize the xml file of the test case end_time=time.time() duration= end_time - start_time - xmlFile = logdir_local + '/cmake_targets/autotests/log/'+ testcasename + 'test.' + testcasename + '.xml' + xmlFile = logdir_local + '/cmake_targets/autotests/log/'+ testcasename + '/test.' + testcasename + '.xml' if test_result ==0: result='FAIL' else: result = 'PASS' - xml="" + xml="\n \n" write_file(xmlFile, xml, mode="w") diff --git a/cmake_targets/autotests/test_case_list.xml b/cmake_targets/autotests/test_case_list.xml index 94dc3a35ff..9f2091053e 100644 --- a/cmake_targets/autotests/test_case_list.xml +++ b/cmake_targets/autotests/test_case_list.xml @@ -6,16 +6,16 @@ https://gitlab.eurecom.fr/oai/openair-cn.git feature-34-test_framework feature-17-test_framework - oaisim* oaisim_nos1* lte-softmodem* lte-softmodem-nos1* mme_gw* run_epc* run_hss* iperf* hss hss_sim configure_cots_bandrich_ue* wvdial* run_exec_autotests* + oaisim* oaisim_nos1* lte-softmodem* lte-softmodem-nos1* mme_gw* run_epc* run_hss* iperf* hss hss_sim configure_cots_bandrich_ue* wvdial* run_exec_autotests* iperf /opt/ltebox/tools/stop_ltebox - 1800 + 36000 calisson stevens mozart nano amerique compilation Build oaisim.Rel8 $OPENAIR_DIR/cmake_targets/build_oai - --oaisim -r Rel8 + --oaisim -r Rel8 -c $OPENAIR_DIR/cmake_targets/oaisim_build_oai/build/oaisim $OPENAIR_DIR/cmake_targets/at_commands/build/at_nas_ue $OPENAIR_DIR/cmake_targets/nas_sim_tools/build/usim @@ -35,7 +35,7 @@ Build oaisim.Rel10 $OPENAIR_DIR/cmake_targets/build_oai - --oaisim -r Rel10 + --oaisim -r Rel10 -c $OPENAIR_DIR/cmake_targets/oaisim_build_oai/build/oaisim $OPENAIR_DIR/cmake_targets/at_commands/build/at_nas_ue $OPENAIR_DIR/cmake_targets/nas_sim_tools/build/usim @@ -55,7 +55,7 @@ Build oaisim_noS1.Rel10 $OPENAIR_DIR/cmake_targets/build_oai - --oaisim -r Rel10 --noS1 + --oaisim -r Rel10 --noS1 -c $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1 $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/rb_tool $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko @@ -75,7 +75,7 @@ Build lte_softmodem_noS1.USRP.Rel10 $OPENAIR_DIR/cmake_targets/build_oai - --eNB -w USRP -r Rel10 --noS1 + --eNB -w USRP -r Rel10 --noS1 -c $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/rb_tool $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko @@ -94,7 +94,7 @@ Build lte_softmodem_noS1.EXMIMO.Rel10 $OPENAIR_DIR/cmake_targets/build_oai - --eNB -w EXMIMO -r Rel10 --noS1 + --eNB -w EXMIMO -r Rel10 --noS1 -c $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/rb_tool $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko @@ -116,7 +116,7 @@ Build lte_softmodem_noS1.BLADERF.Rel10 $OPENAIR_DIR/cmake_targets/build_oai - --eNB -w BLADERF -r Rel10 --noS1 + --eNB -w BLADERF -r Rel10 --noS1 -c $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/rb_tool $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko @@ -135,7 +135,7 @@ Build lte_softmodem_noS1.ETHERNET.Rel10 $OPENAIR_DIR/cmake_targets/build_oai - --eNB -w ETHERNET -r Rel10 --noS1 + --eNB -w ETHERNET -r Rel10 --noS1 -c $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1 $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/rb_tool $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko @@ -156,7 +156,7 @@ Build lte_softmodem.USRP.Rel10 $OPENAIR_DIR/cmake_targets/build_oai - --eNB -w USRP -r Rel10 + --eNB -w USRP -r Rel10 -c $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem @@ -173,7 +173,7 @@ Build lte_softmodem.EXMIMO.Rel10 $OPENAIR_DIR/cmake_targets/build_oai - --eNB -w EXMIMO -r Rel10 + --eNB -w EXMIMO -r Rel10 -c $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem $OPENAIR_DIR/cmake_targets/lte_build_oai/build/CMakeFiles/openair_rf/openair_rf.ko $OPENAIR_DIR/cmake_targets/lte_build_oai/build/updatefw @@ -193,7 +193,7 @@ Build lte_softmodem.BLADERF.Rel10 $OPENAIR_DIR/cmake_targets/build_oai - --eNB -w BLADERF -r Rel10 + --eNB -w BLADERF -r Rel10 -c $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem @@ -210,7 +210,7 @@ Build lte_softmodem.ETHERNET.Rel10 $OPENAIR_DIR/cmake_targets/build_oai - --eNB -w ETHERNET -r Rel10 + --eNB -w ETHERNET -r Rel10 -c $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem @@ -227,7 +227,7 @@ Build phy unitary simulators + secuirity unitary tests $OPENAIR_DIR/cmake_targets/build_oai - --phy_simulators --core_simulators + --phy_simulators --core_simulators -c $OPENAIR_DIR/cmake_targets/lte-simulators/build/dlsim $OPENAIR_DIR/cmake_targets/lte-simulators/build/ulsim $OPENAIR_DIR/cmake_targets/lte-simulators/build/pucchsim @@ -261,7 +261,7 @@ Build RRH Gateway $OPENAIR_DIR/cmake_targets/build_oai - --RRH -w USRP + --RRH -w USRP -c $OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw @@ -278,7 +278,7 @@ Build RRH Gateway $OPENAIR_DIR/cmake_targets/build_oai - --RRH -w EXMIMO + --RRH -w EXMIMO -c $OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw $OPENAIR_DIR/cmake_targets/rrh_gw/build/CMakeFiles/openair_rf/openair_rf.ko $OPENAIR_DIR/cmake_targets/rrh_gw/build/updatefw @@ -298,7 +298,7 @@ Build RRH Gateway $OPENAIR_DIR/cmake_targets/build_oai - --RRH -w BLADERF + --RRH -w BLADERF -c $OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw @@ -316,7 +316,7 @@ Run OAISIM Rel10 TDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2,5,6) and search for errors, segmentation fault or exit $OPENAIR_DIR/cmake_targets/build_oai - --oaisim --noS1 + --oaisim --noS1 -c $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1 @@ -343,7 +343,7 @@ Run OAISIM Rel10 TDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2,5,6) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit $OPENAIR_DIR/cmake_targets/build_oai - --oaisim --noS1 + --oaisim --noS1 -c $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1 @@ -370,7 +370,7 @@ Run OAISIM Rel10 TDD, 1 eNB + 3 UEs (5 MHz/10MHz/20MHz), (TM 1,2,5,6) and search for errors, segmentation fault or exit $OPENAIR_DIR/cmake_targets/build_oai - --oaisim --noS1 + --oaisim --noS1 -c $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1 @@ -397,7 +397,7 @@ Run OAISIM Rel10 TDD, 1 eNB + 3 UEs (5 MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit $OPENAIR_DIR/cmake_targets/build_oai - --oaisim --noS1 + --oaisim --noS1 -c $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1 @@ -413,7 +413,7 @@ -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 6 -a -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 6 -a -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 6 -a - oaisim_noS1.tdd.5MHz.TM1 oaisim_noS1.tdd.10MHz.TM1 oaisim_noS1.tdd.20MHz.TM1 oaisim_noS1.tdd.5MHz.TM2 oaisim_noS1.tdd.10MHz.TM2 tdd.20MHz.TM2 oaisim_noS1.tdd.5MHz.TM5 oaisim_noS1.tdd.10MHz.TM5 oaisim_noS1.tdd.20MHz.TM5 oaisim_noS1.tdd.5MHz.TM6 oaisim_noS1.tdd.10MHz.TM6 oaisim_noS1.tdd.20MHz.TM6 + oaisim_noS1.tdd.5MHz.TM1 oaisim_noS1.tdd.10MHz.TM1 oaisim_noS1.tdd.20MHz.TM1 oaisim_noS1.tdd.5MHz.TM2 oaisim_noS1.tdd.10MHz.TM2 oaisim_nos1.tdd.20MHz.TM2 oaisim_noS1.tdd.5MHz.TM5 oaisim_noS1.tdd.10MHz.TM5 oaisim_noS1.tdd.20MHz.TM5 oaisim_noS1.tdd.5MHz.TM6 oaisim_noS1.tdd.10MHz.TM6 oaisim_noS1.tdd.20MHz.TM6 "Received RRCConnectionReconfigurationComplete from UE 0" "Received RRCConnectionReconfigurationComplete from UE 1" "Received RRCConnectionReconfigurationComplete from UE 2" segmentation fault|assertion|exiting|fatal 3 @@ -424,7 +424,7 @@ Run OAI Rel10 TDD, 1 eNB + 1 UE (5 MHz) without abstraction mode, send ping from from eNB to UE, and check that there is no packet losses $OPENAIR_DIR/cmake_targets/build_oai - --oaisim --noS1 + --oaisim --noS1 -c $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1 @@ -451,7 +451,7 @@ Run OAI Rel10 TDD, 1 eNB + 1 UE (5 MHz) in PHY_ABSTRACTION mode, send ping from from eNB to UE, and check that there is no packet losses $OPENAIR_DIR/cmake_targets/build_oai - --oaisim --noS1 + --oaisim --noS1 -c $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1 @@ -467,7 +467,7 @@ -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 6 -c26 -a -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 6 -c26 -a -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 6 -c26 -a - oaisim_noS1.tdd.5MHz.TM1 oaisim_noS1.tdd.10MHz.TM1 oaisim_noS1.tdd.20MHz.TM1 oaisim_noS1.tdd.5MHz.TM2 oaisim_noS1.tdd.10MHz.TM2 oaisim_noS1.tdd.20MHz.TM2 oaisim_noS1.tdd.5MHz.TM5 oaisim_noS1.tdd.10MHz.TM5 tdd.20MHz.TM5 oaisim_noS1.tdd.5MHz.TM6 oaisim_noS1.tdd.10MHz.TM6 oaisim_noS1.tdd.20MHz.TM6 + oaisim_noS1.tdd.5MHz.TM1 oaisim_noS1.tdd.10MHz.TM1 oaisim_noS1.tdd.20MHz.TM1 oaisim_noS1.tdd.5MHz.TM2 oaisim_noS1.tdd.10MHz.TM2 oaisim_noS1.tdd.20MHz.TM2 oaisim_noS1.tdd.5MHz.TM5 oaisim_noS1.tdd.10MHz.TM5 oaisim_nos1.tdd.20MHz.TM5 oaisim_noS1.tdd.5MHz.TM6 oaisim_noS1.tdd.10MHz.TM6 oaisim_noS1.tdd.20MHz.TM6 "DL and UL loss rate below 10" segmentation fault|assertion|exiting|fatal 3 @@ -478,7 +478,7 @@ Run OAISIM Rel10 FDD, 1 eNB + 1 UE 1 eNB (5 MHz/10MHz/20MHz), (TM 1,2,5,6) and search for errors, segmentation fault or exit $OPENAIR_DIR/cmake_targets/build_oai - --oaisim --noS1 + --oaisim --noS1 -c $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1 @@ -505,7 +505,7 @@ Run OAISIM Rel10 FDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2,5,6) in PHY_ABSTRACTION mode and search for errors $OPENAIR_DIR/cmake_targets/build_oai - --oaisim --noS1 + --oaisim --noS1 -c $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1 @@ -532,7 +532,7 @@ Run OAISIM Rel10 FDD, 1 eNB + 3 UEs (5 MHz/10MHz/20MHz), (TM 1,2,5,6) and search for errors, segmentation fault or exit $OPENAIR_DIR/cmake_targets/build_oai - --oaisim --noS1 + --oaisim --noS1 -c $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1 @@ -559,7 +559,7 @@ Run OAISIM Rel10 FDD, 1 eNB + 3 UEs (5 MHz/10MHz/20MHz), (TM 1,2,5,6) in PHY_ABSTRACTION mode and search for errors $OPENAIR_DIR/cmake_targets/build_oai - --oaisim --noS1 + --oaisim --noS1 -c $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1 @@ -586,7 +586,7 @@ Run OAI Rel10 FDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2,5,6) without PHY_ABSTRACTION mode, ping from from eNB to UE, and for check for no packet losses $OPENAIR_DIR/cmake_targets/build_oai - --oaisim --noS1 + --oaisim --noS1 -c $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1 @@ -613,7 +613,7 @@ Run OAI Rel10 FDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2,5,6) in PHY_ABSTRACTION mode, send ping from from eNB to UE, and check for no packet losses $OPENAIR_DIR/cmake_targets/build_oai - --oaisim --noS1 + --oaisim --noS1 -c $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1 @@ -640,7 +640,7 @@ Check if eMBMS procedure is not finished completely, make sure that the SIB13/MCCH have been correclty received by UEs $OPENAIR_DIR/cmake_targets/build_oai - --oaisim --noS1 + --oaisim --noS1 -c $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1 @@ -656,7 +656,7 @@ Check if eMBMS multicast/broadcast data is received, make sure that the SIB13/MCCH/MTCH have been correclty received by UEs $OPENAIR_DIR/cmake_targets/build_oai - --oaisim --noS1 + --oaisim --noS1 -c $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1 @@ -672,7 +672,7 @@ Check for eMBMS multicast/broadcast data received in fdd mode, make sure that the SIB13/MCCH/MTCH have been correclty received by UEs $OPENAIR_DIR/cmake_targets/build_oai - --oaisim --noS1 + --oaisim --noS1 -c $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1 @@ -688,7 +688,7 @@ Check for eMBMS multicast/broadcast DF relaying working properly in fdd mode, make sure that the SIB13/MCCH/MTCH have been correclty received by UEs $OPENAIR_DIR/cmake_targets/build_oai - --oaisim --noS1 + --oaisim --noS1 -c $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1 @@ -704,7 +704,7 @@ test_aes128_cmac_encrypt $OPENAIR_DIR/cmake_targets/build_oai - --core_simulators + --core_simulators -c $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_aes128_cmac_encrypt @@ -720,7 +720,7 @@ test_aes128_ctr_decrypt $OPENAIR_DIR/cmake_targets/build_oai - --core_simulators + --core_simulators -c $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_aes128_ctr_decrypt @@ -736,7 +736,7 @@ test_aes128_ctr_encrypt $OPENAIR_DIR/cmake_targets/build_oai - --core_simulators + --core_simulators -c $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_aes128_ctr_encrypt @@ -752,7 +752,7 @@ test_secu_kenb $OPENAIR_DIR/cmake_targets/build_oai - --core_simulators + --core_simulators -c $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_kenb @@ -768,7 +768,7 @@ test_secu_knas $OPENAIR_DIR/cmake_targets/build_oai - --core_simulators + --core_simulators -c $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas @@ -784,7 +784,7 @@ test_secu_knas_encrypt_eea1 $OPENAIR_DIR/cmake_targets/build_oai - --core_simulators + --core_simulators -c $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eea1 @@ -800,7 +800,7 @@ test_secu_knas_encrypt_eea2 $OPENAIR_DIR/cmake_targets/build_oai - --core_simulators + --core_simulators -c $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eea2 @@ -816,7 +816,7 @@ test_secu_knas_encrypt_eia1 $OPENAIR_DIR/cmake_targets/build_oai - --core_simulators + --core_simulators -c $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eia1 @@ -832,7 +832,7 @@ test_secu_knas_encrypt_eia2 $OPENAIR_DIR/cmake_targets/build_oai - --core_simulators + --core_simulators -c $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eia1 @@ -848,7 +848,7 @@ test_kdf $OPENAIR_DIR/cmake_targets/build_oai - --core_simulators + --core_simulators -c $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_kdf @@ -875,7 +875,7 @@ $OPENAIR_DIR/cmake_targets/build_oai - --phy_simulators + --phy_simulators -c $OPENAIR_DIR/cmake_targets/lte-simulators/build/dlsim @@ -893,7 +893,7 @@ dlsim.test1 dlsim.test5 dlsim.test6 dlsim.test6b dlsim.test7 dlsim.test7b dlsim.test10 dlsim.test10b dlsim.test11 dlsim.TM2_test1 dlsim.TM2_test1b "passed" segmentation fault|assertion|exiting|fatal - 1 + 3 @@ -906,7 +906,7 @@ (Test 6, 20 MHz, FDD (MCS 16), AWGN, 12 dB (70%)) $OPENAIR_DIR/cmake_targets/build_oai - --phy_simulators + --phy_simulators -c $OPENAIR_DIR/cmake_targets/lte-simulators/build/ulsim @@ -919,7 +919,7 @@ ulsim.test1 ulsim.test2 ulsim.test3 ulsim.test4 ulsim.test5 ulsim.test6 "passed" segmentation fault|assertion|exiting|fatal - 1 + 3 @@ -937,7 +937,14 @@ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 120 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1 $OPENAIR_DIR/cmake_targets/build_oai --eNB -w USRP -x -c @@ -958,13 +965,14 @@ --eNB -w USRP -x -c - sleep 30 ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 3000 -B 192.172.0.2 + while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 120 -B 192.172.0.2 True + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue /tmp BUILD/EPC/epc.local.enb.conf.in MCC \"208\" @@ -985,14 +993,1758 @@ sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.1 - throughput_test min=0.0Mbits/sec max=0.0Mbits/sec average=0.0Mbits/sec duration=0.0s + throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec duration=60.0s True - USRP.ALU_EPC.Bandrich.5MHz.FDD.UL + USRP.ALU_EPC.Bandrich.5MHz.FDD.Band_7.UL.1TX.1RX 3 + + lte-softmodem + + calisson + stevens + amerique + 180 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 120 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf + + + + + True + + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 120 -B 192.172.0.2 + + + + True + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + + /tmp + BUILD/EPC/epc.local.enb.conf.in MCC \"208\" + BUILD/EPC/epc.local.enb.conf.in MNC \"92\" + BUILD/EPC/epc.local.enb.conf.in TAC \"1\" + BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + SCRIPTS/build_epc + -c -l + SCRIPTS/build_hss + -c -l + + + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.1 + + throughput_test min=2.0Mbits/sec max=2.0Mbits/sec average=2.0Mbits/sec duration=60.0s + + True + USRP.ALU_EPC.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX + 3 + + + + lte-softmodem + + calisson + stevens + amerique + 180 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 100 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 120 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf + + + + + True + + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 120 -B 192.172.0.2 + + + + True + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + + /tmp + BUILD/EPC/epc.local.enb.conf.in MCC \"208\" + BUILD/EPC/epc.local.enb.conf.in MNC \"92\" + BUILD/EPC/epc.local.enb.conf.in TAC \"1\" + BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + SCRIPTS/build_epc + -c -l + SCRIPTS/build_hss + -c -l + + + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.1 + + throughput_test min=4.0Mbits/sec max=4.0Mbits/sec average=4.0Mbits/sec duration=60.0s + + True + USRP.ALU_EPC.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX + 3 + + + + lte-softmodem + + calisson + stevens + amerique + 180 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 25 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 120 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf + + + + + True + + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.2 + + + + True + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + throughput_test min=4.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec duration=60.0s + + /tmp + BUILD/EPC/epc.local.enb.conf.in MCC \"208\" + BUILD/EPC/epc.local.enb.conf.in MNC \"92\" + BUILD/EPC/epc.local.enb.conf.in TAC \"1\" + BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + SCRIPTS/build_epc + -c -l + SCRIPTS/build_hss + -c -l + + + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 120 -B 192.172.0.1 + + + True + USRP.ALU_EPC.Bandrich.5MHz.FDD.Band_7.DL.1TX.1RX + 3 + + + + lte-softmodem + + calisson + stevens + amerique + 180 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 120 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf + + + + + True + + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.2 + + + + True + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec duration=60.0s + + /tmp + BUILD/EPC/epc.local.enb.conf.in MCC \"208\" + BUILD/EPC/epc.local.enb.conf.in MNC \"92\" + BUILD/EPC/epc.local.enb.conf.in TAC \"1\" + BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + SCRIPTS/build_epc + -c -l + SCRIPTS/build_hss + -c -l + + + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 120 -B 192.172.0.1 + + + True + USRP.ALU_EPC.Bandrich.10MHz.FDD.Band_7.DL.1TX.1RX + 3 + + + + lte-softmodem + + calisson + stevens + amerique + 180 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 100 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 120 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf + + + + + True + + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.2 + + + + True + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + throughput_test min=15.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec duration=60.0s + + /tmp + BUILD/EPC/epc.local.enb.conf.in MCC \"208\" + BUILD/EPC/epc.local.enb.conf.in MNC \"92\" + BUILD/EPC/epc.local.enb.conf.in TAC \"1\" + BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + SCRIPTS/build_epc + -c -l + SCRIPTS/build_hss + -c -l + + + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 120 -B 192.172.0.1 + + + True + USRP.ALU_EPC.Bandrich.20MHz.FDD.Band_7.DL.1TX.1RX + 3 + + + + + lte-softmodem + + calisson + stevens + amerique + 180 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 25 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 120 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 2 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf + + + + + True + + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 120 -B 192.172.0.2 + + + + True + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + + /tmp + BUILD/EPC/epc.local.enb.conf.in MCC \"208\" + BUILD/EPC/epc.local.enb.conf.in MNC \"92\" + BUILD/EPC/epc.local.enb.conf.in TAC \"1\" + BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + SCRIPTS/build_epc + -c -l + SCRIPTS/build_hss + -c -l + + + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.1 + + throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec duration=60.0s + + True + USRP.ALU_EPC.Bandrich.5MHz.FDD.Band_7.UL.2TX.2RX + 3 + + + + + lte-softmodem + + calisson + stevens + amerique + 180 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 120 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 2 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf + + + + + True + + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 120 -B 192.172.0.2 + + + + True + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + + /tmp + BUILD/EPC/epc.local.enb.conf.in MCC \"208\" + BUILD/EPC/epc.local.enb.conf.in MNC \"92\" + BUILD/EPC/epc.local.enb.conf.in TAC \"1\" + BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + SCRIPTS/build_epc + -c -l + SCRIPTS/build_hss + -c -l + + + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.1 + + throughput_test min=2.0Mbits/sec max=2.0Mbits/sec average=2.0Mbits/sec duration=60.0s + + True + USRP.ALU_EPC.Bandrich.10MHz.FDD.Band_7.UL.2TX.2RX + 3 + + + + lte-softmodem + + calisson + stevens + amerique + 180 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 100 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 120 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 2 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf + + + + + True + + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 120 -B 192.172.0.2 + + + + True + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + + /tmp + BUILD/EPC/epc.local.enb.conf.in MCC \"208\" + BUILD/EPC/epc.local.enb.conf.in MNC \"92\" + BUILD/EPC/epc.local.enb.conf.in TAC \"1\" + BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + SCRIPTS/build_epc + -c -l + SCRIPTS/build_hss + -c -l + + + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.1 + + throughput_test min=4.0Mbits/sec max=4.0Mbits/sec average=4.0Mbits/sec duration=60.0s + + True + USRP.ALU_EPC.Bandrich.20MHz.FDD.Band_7.UL.2TX.2RX + 3 + + + + lte-softmodem + + calisson + stevens + amerique + 180 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 25 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 120 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 2 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf + + + + + True + + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.2 + + + + True + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + throughput_test min=4.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec duration=60.0s + + /tmp + BUILD/EPC/epc.local.enb.conf.in MCC \"208\" + BUILD/EPC/epc.local.enb.conf.in MNC \"92\" + BUILD/EPC/epc.local.enb.conf.in TAC \"1\" + BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + SCRIPTS/build_epc + -c -l + SCRIPTS/build_hss + -c -l + + + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 120 -B 192.172.0.1 + + + True + USRP.ALU_EPC.Bandrich.5MHz.FDD.Band_7.DL.2TX.2RX + 3 + + + + lte-softmodem + + calisson + stevens + amerique + 180 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 120 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 2 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf + + + + + True + + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.2 + + + + True + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec duration=60.0s + + /tmp + BUILD/EPC/epc.local.enb.conf.in MCC \"208\" + BUILD/EPC/epc.local.enb.conf.in MNC \"92\" + BUILD/EPC/epc.local.enb.conf.in TAC \"1\" + BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + SCRIPTS/build_epc + -c -l + SCRIPTS/build_hss + -c -l + + + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 120 -B 192.172.0.1 + + + True + USRP.ALU_EPC.Bandrich.10MHz.FDD.Band_7.DL.2TX.2RX + 3 + + + + lte-softmodem + + calisson + stevens + amerique + 180 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 100 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 120 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 2 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf + + + + + True + + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.2 + + + + True + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + throughput_test min=15.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec duration=60.0s + + /tmp + BUILD/EPC/epc.local.enb.conf.in MCC \"208\" + BUILD/EPC/epc.local.enb.conf.in MNC \"92\" + BUILD/EPC/epc.local.enb.conf.in TAC \"1\" + BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + SCRIPTS/build_epc + -c -l + SCRIPTS/build_hss + -c -l + + + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 120 -B 192.172.0.1 + + + True + USRP.ALU_EPC.Bandrich.20MHz.FDD.Band_7.DL.2TX.2RX + 3 + + + + + lte-softmodem + + mozart + stevens + amerique + 180 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf N_RB_DL 25 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf nb_antennas_tx 1 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf + + + + + True + + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 120 -B 192.172.0.2 + + + + True + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + + /tmp + BUILD/EPC/epc.local.enb.conf.in MCC \"208\" + BUILD/EPC/epc.local.enb.conf.in MNC \"92\" + BUILD/EPC/epc.local.enb.conf.in TAC \"1\" + BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + SCRIPTS/build_epc + -c -l + SCRIPTS/build_hss + -c -l + + + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.1 + + throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec duration=60.0s + + True + USRPx310.ALU_EPC.Bandrich.5MHz.FDD.Band_7.UL.1TX.1RX + 3 + + + + + lte-softmodem + + mozart + stevens + amerique + 180 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.conf N_RB_DL 50 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.conf nb_antennas_tx 1 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.conf + + + + + True + + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 120 -B 192.172.0.2 + + + + True + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + + /tmp + BUILD/EPC/epc.local.enb.conf.in MCC \"208\" + BUILD/EPC/epc.local.enb.conf.in MNC \"92\" + BUILD/EPC/epc.local.enb.conf.in TAC \"1\" + BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + SCRIPTS/build_epc + -c -l + SCRIPTS/build_hss + -c -l + + + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.1 + + throughput_test min=2.0Mbits/sec max=2.0Mbits/sec average=2.0Mbits/sec duration=60.0s + + True + USRPx310.ALU_EPC.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX + 3 + + + + lte-softmodem + + calisson + stevens + amerique + 180 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf N_RB_DL 100 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf nb_antennas_tx 1 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf + + + + + True + + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 120 -B 192.172.0.2 + + + + True + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + + /tmp + BUILD/EPC/epc.local.enb.conf.in MCC \"208\" + BUILD/EPC/epc.local.enb.conf.in MNC \"92\" + BUILD/EPC/epc.local.enb.conf.in TAC \"1\" + BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + SCRIPTS/build_epc + -c -l + SCRIPTS/build_hss + -c -l + + + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.1 + + throughput_test min=4.0Mbits/sec max=4.0Mbits/sec average=4.0Mbits/sec duration=60.0s + + True + USRPx310.ALU_EPC.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX + 3 + + + + lte-softmodem + + calisson + stevens + amerique + 180 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf N_RB_DL 25 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf nb_antennas_tx 1 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf + + + + + True + + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.2 + + + + True + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + throughput_test min=4.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec duration=60.0s + + /tmp + BUILD/EPC/epc.local.enb.conf.in MCC \"208\" + BUILD/EPC/epc.local.enb.conf.in MNC \"92\" + BUILD/EPC/epc.local.enb.conf.in TAC \"1\" + BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + SCRIPTS/build_epc + -c -l + SCRIPTS/build_hss + -c -l + + + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 120 -B 192.172.0.1 + + + True + USRPx310.ALU_EPC.Bandrich.5MHz.FDD.Band_7.DL.1TX.1RX + 3 + + + + lte-softmodem + + calisson + stevens + amerique + 180 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.conf N_RB_DL 50 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.conf nb_antennas_tx 1 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.conf + + + + + True + + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.2 + + + + True + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec duration=60.0s + + /tmp + BUILD/EPC/epc.local.enb.conf.in MCC \"208\" + BUILD/EPC/epc.local.enb.conf.in MNC \"92\" + BUILD/EPC/epc.local.enb.conf.in TAC \"1\" + BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + SCRIPTS/build_epc + -c -l + SCRIPTS/build_hss + -c -l + + + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 120 -B 192.172.0.1 + + + True + USRPx310.ALU_EPC.Bandrich.10MHz.FDD.Band_7.DL.1TX.1RX + 3 + + + + lte-softmodem + + calisson + stevens + amerique + 180 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf N_RB_DL 100 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf nb_antennas_tx 1 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.remote.conf + + + + + True + + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.2 + + + + True + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + throughput_test min=15.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec duration=60.0s + + /tmp + BUILD/EPC/epc.local.enb.conf.in MCC \"208\" + BUILD/EPC/epc.local.enb.conf.in MNC \"92\" + BUILD/EPC/epc.local.enb.conf.in TAC \"1\" + BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + SCRIPTS/build_epc + -c -l + SCRIPTS/build_hss + -c -l + + + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 120 -B 192.172.0.1 + + + True + USRP.ALU_EPC.Bandrich.20MHz.FDD.Band_7.DL.1TX.1RX + 3 + + + + + + + lte-softmodem + + calisson + stevens + amerique + 180 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 25 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_tx 1 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w EXMIMO -x -c + sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf + + + + + True + + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 120 -B 192.172.0.2 + + + + True + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + + /tmp + BUILD/EPC/epc.local.enb.conf.in MCC \"208\" + BUILD/EPC/epc.local.enb.conf.in MNC \"92\" + BUILD/EPC/epc.local.enb.conf.in TAC \"1\" + BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + SCRIPTS/build_epc + -c -l + SCRIPTS/build_hss + -c -l + + + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.1 + + throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec duration=60.0s + + True + EXMIMO.ALU_EPC.Bandrich.5MHz.FDD.Band_7.UL.1TX.1RX + 3 + + + + + lte-softmodem + + calisson + stevens + amerique + 180 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 50 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_tx 1 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w EXMIMO -x -c + sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf + + + + + True + + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 120 -B 192.172.0.2 + + + + True + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + + /tmp + BUILD/EPC/epc.local.enb.conf.in MCC \"208\" + BUILD/EPC/epc.local.enb.conf.in MNC \"92\" + BUILD/EPC/epc.local.enb.conf.in TAC \"1\" + BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + SCRIPTS/build_epc + -c -l + SCRIPTS/build_hss + -c -l + + + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.1 + + throughput_test min=2.0Mbits/sec max=2.0Mbits/sec average=2.0Mbits/sec duration=60.0s + + True + EXMIMO.ALU_EPC.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX + 3 + + + + lte-softmodem + + calisson + stevens + amerique + 180 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 100 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_tx 1 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w EXMIMO -x -c + sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf + + + + + True + + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 120 -B 192.172.0.2 + + + + True + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + + /tmp + BUILD/EPC/epc.local.enb.conf.in MCC \"208\" + BUILD/EPC/epc.local.enb.conf.in MNC \"92\" + BUILD/EPC/epc.local.enb.conf.in TAC \"1\" + BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + SCRIPTS/build_epc + -c -l + SCRIPTS/build_hss + -c -l + + + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.1 + + throughput_test min=4.0Mbits/sec max=4.0Mbits/sec average=4.0Mbits/sec duration=60.0s + + True + EXMIMO.ALU_EPC.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX + 3 + + + + lte-softmodem + + calisson + stevens + amerique + 180 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 25 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_tx 1 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf + + + + + True + + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.2 + + + + True + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + throughput_test min=4.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec duration=60.0s + + /tmp + BUILD/EPC/epc.local.enb.conf.in MCC \"208\" + BUILD/EPC/epc.local.enb.conf.in MNC \"92\" + BUILD/EPC/epc.local.enb.conf.in TAC \"1\" + BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + SCRIPTS/build_epc + -c -l + SCRIPTS/build_hss + -c -l + + + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 120 -B 192.172.0.1 + + + True + EXMIMO.ALU_EPC.Bandrich.5MHz.FDD.Band_7.DL.1TX.1RX + 3 + + + + lte-softmodem + + calisson + stevens + amerique + 180 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 50 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_tx 1 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w EXMIMO -x -c + sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf + + + + + True + + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.2 + + + + True + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec duration=60.0s + + /tmp + BUILD/EPC/epc.local.enb.conf.in MCC \"208\" + BUILD/EPC/epc.local.enb.conf.in MNC \"92\" + BUILD/EPC/epc.local.enb.conf.in TAC \"1\" + BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + SCRIPTS/build_epc + -c -l + SCRIPTS/build_hss + -c -l + + + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 120 -B 192.172.0.1 + + + True + EXMIMO.ALU_EPC.Bandrich.10MHz.FDD.Band_7.DL.1TX.1RX + 3 + + + + lte-softmodem + + calisson + stevens + amerique + 180 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 100 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_tx 1 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w EXMIMO -x -c + sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf + + + + + True + + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.2 + + + + True + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + throughput_test min=15.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec duration=60.0s + + /tmp + BUILD/EPC/epc.local.enb.conf.in MCC \"208\" + BUILD/EPC/epc.local.enb.conf.in MNC \"92\" + BUILD/EPC/epc.local.enb.conf.in TAC \"1\" + BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + SCRIPTS/build_epc + -c -l + SCRIPTS/build_hss + -c -l + + + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 120 -B 192.172.0.1 + + + True + EXMIMO.ALU_EPC.Bandrich.20MHz.FDD.Band_7.DL.1TX.1RX + 3 + + + + lte-softmodem @@ -1010,7 +2762,7 @@ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" $OPENAIR_DIR/cmake_targets/build_oai - --eNB -w USRP + --eNB -w USRP -c $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem @@ -1026,7 +2778,7 @@ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" $OPENAIR_DIR/cmake_targets/build_oai - --eNB -w USRP + --eNB -w USRP -c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue @@ -1089,7 +2841,7 @@ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" $OPENAIR_DIR/cmake_targets/build_oai - --eNB -w USRP + --eNB -w USRP -c $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem @@ -1105,7 +2857,7 @@ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" $OPENAIR_DIR/cmake_targets/build_oai - --eNB -w USRP + --eNB -w USRP -c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue diff --git a/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py b/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py index aa041360b7..ae25013f52 100755 --- a/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py +++ b/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py @@ -127,7 +127,7 @@ def start_ue () : ip = IPRoute() idx = ip.link_lookup(ifname=iface)[0] os.system ('route add 192.172.0.1 ppp0') - os.system ('ping 192.172.0.1') + os.system ('ping -c 5 192.172.0.1') break except Exception, e: error = ' Interface ' + iface + 'does not exist...' diff --git a/cmake_targets/build_oai b/cmake_targets/build_oai index 6d337c6d52..25bec96b98 100755 --- a/cmake_targets/build_oai +++ b/cmake_targets/build_oai @@ -555,17 +555,22 @@ function main() { ##################### if [ "$OAI_TEST" = "1" ]; then echo_info "10. Running OAI pre commit tests (pre-ci) ..." - read -s -p "Enter Password: " mypassword - echo -e "\n" + echo_error "These scripts ASSUME that user is in /etc/sudoers and can execute commands without PASSWORD prompt" + echo_error "Add the following lines in /etc/sudoers file to make your __user_name__ sudo without password prompt" + echo_error " __your_user_name__ ALL = (ALL:ALL) NOPASSWD: ALL" + echo_error " __your_user_name__ ALL = (ALL) NOPASSWD: ALL " echo_info "The log file for the autotest script for debugging is located here: $OPENAIR_DIR/cmake_targets/autotests/log/autotests.log " echo_info "The results of autotests results is located here: $OPENAIR_DIR/cmake_targets/autotests/log/results_autotests.xml " echo_info "You can hit CTRL-C any time to terminate the autotests..." + echo "Current User Name: $USER" + read -s -p "Enter Password: " mypassword + echo -e "\n" rm -fr $OPENAIR_DIR/cmake_targets/autotests/log mkdir -p $OPENAIR_DIR/cmake_targets/autotests/log if [ "$RUN_GROUP" -eq "1" ]; then - echo '$mypassword' | $OPENAIR_DIR/cmake_targets/autotests/run_exec_autotests.bash -g "$TEST_CASE_GROUP" >& $OPENAIR_DIR/cmake_targets/autotests/log/autotests.log & + $OPENAIR_DIR/cmake_targets/autotests/run_exec_autotests.bash -g "$TEST_CASE_GROUP" -p '$mypassword' >& $OPENAIR_DIR/cmake_targets/autotests/log/autotests.log & else - echo '$mypassword' | $OPENAIR_DIR/cmake_targets/autotests/run_exec_autotests.bash >& $OPENAIR_DIR/cmake_targets/autotests/log/autotests.log & + $OPENAIR_DIR/cmake_targets/autotests/run_exec_autotests.bash -p '$mypassword' >& $OPENAIR_DIR/cmake_targets/autotests/log/autotests.log & fi wait else