Merge remote-tracking branch 'origin/develop' into feature-131-new-license

Conflicts:
	openair1/PHY/INIT/lte_init.c
	openair1/PHY/LTE_TRANSPORT/dci_tools.c
	openair1/PHY/LTE_TRANSPORT/ulsch_decoding.c
	openair1/SCHED/phy_procedures_lte_eNb.c
	openair1/SCHED/phy_procedures_lte_ue.c
	openair1/SIMULATION/LTE_PHY/dlsim.c
	openair1/SIMULATION/RF/adc.c
	openair2/LAYER2/MAC/lte_transport_init.c
	targets/RT/USER/lte-softmodem.c
	targets/RT/USER/sched_dlsch.c
	targets/RT/USER/sched_rx_pdsch.c
	targets/RT/USER/sched_ulsch.c
	targets/SIMU/USER/oaisim.c
This commit is contained in:
Cedric Roux
2016-09-27 15:05:00 +02:00
200 changed files with 22970 additions and 19972 deletions
@@ -24,7 +24,6 @@
#include "common_lib.h"
#include "ethernet_lib.h"
int num_devices_eth = 0;
struct sockaddr_in dest_addr[MAX_INST];
int dest_addr_len[MAX_INST];
@@ -35,7 +34,8 @@ int trx_eth_start(openair0_device *device) {
eth_state_t *eth = (eth_state_t*)device->priv;
/* initialize socket */
if ((eth->flags & ETH_RAW_MODE) != 0 ) {
if (eth->flags == ETH_RAW_MODE) {
printf("Setting ETHERNET to ETH_RAW_IF5_MODE\n");
if (eth_socket_init_raw(device)!=0) return -1;
/* RRH gets openair0 device configuration - BBU sets openair0 device configuration*/
if (device->host_type == BBU_HOST) {
@@ -45,6 +45,32 @@ int trx_eth_start(openair0_device *device) {
}
/* adjust MTU wrt number of samples per packet */
if(ethernet_tune (device,MTU_SIZE,RAW_PACKET_SIZE_BYTES(device->openair0_cfg->samples_per_packet))!=0) return -1;
if(ethernet_tune (device,RCV_TIMEOUT,999999)!=0) return -1;
} else if (eth->flags == ETH_RAW_IF4p5_MODE) {
printf("Setting ETHERNET to ETH_RAW_IF4p5_MODE\n");
if (eth_socket_init_raw(device)!=0) return -1;
/* RRH gets openair0 device configuration - BBU sets openair0 device configuration*/
if (device->host_type == BBU_HOST) {
if(eth_set_dev_conf_raw_IF4p5(device)!=0) return -1;
} else {
if(eth_get_dev_conf_raw_IF4p5(device)!=0) return -1;
}
/* adjust MTU wrt number of samples per packet */
if(ethernet_tune (device,MTU_SIZE,RAW_IF4p5_PRACH_SIZE_BYTES)!=0) return -1;
if(ethernet_tune (device,RCV_TIMEOUT,999999)!=0) return -1;
} else if (eth->flags == ETH_UDP_IF4p5_MODE) {
printf("Setting ETHERNET to UDP_IF4p5_MODE\n");
if (eth_socket_init_udp(device)!=0) return -1;
if (device->host_type == BBU_HOST) {
if(eth_set_dev_conf_udp(device)!=0) return -1;
} else {
if(eth_get_dev_conf_udp(device)!=0) return -1;
}
} else if (eth->flags == ETH_RAW_IF5_MOBIPASS) {
printf("Setting ETHERNET to RAW_IF5_MODE\n");
if (eth_socket_init_raw(device)!=0) return -1;
} else {
if (eth_socket_init_udp(device)!=0) return -1;
/* RRH gets openair0 device configuration - BBU sets openair0 device configuration*/
@@ -53,8 +79,6 @@ int trx_eth_start(openair0_device *device) {
} else {
if(eth_get_dev_conf_udp(device)!=0) return -1;
}
/* adjust MTU wrt number of samples per packet */
//if(ethernet_tune (device,MTU_SIZE,UDP_PACKET_SIZE_BYTES(device->openair0_cfg->samples_per_packet))!=0) return -1;
}
/* apply additional configuration */
if(ethernet_tune (device, SND_BUF_SIZE,2000000000)!=0) return -1;
@@ -115,7 +139,7 @@ int trx_eth_reply(openair0_device *device, void *msg, ssize_t msg_len) {
int trx_eth_stop(int card) {
int trx_eth_stop(openair0_device *device) {
return(0);
}
@@ -143,11 +167,11 @@ int ethernet_tune(openair0_device *device, unsigned int option, int value) {
struct timeval timeout;
struct ifreq ifr;
char system_cmd[256];
char* if_name=DEFAULT_IF;
struct in_addr ia;
struct if_nameindex *ids;
// char* if_name=DEFAULT_IF;
// struct in_addr ia;
// struct if_nameindex *ids;
int ret=0;
int i=0;
// int i=0;
/****************** socket level options ************************/
switch(option) {
@@ -174,15 +198,15 @@ int ethernet_tune(openair0_device *device, unsigned int option, int value) {
break;
case RCV_TIMEOUT:
timeout.tv_sec = value/1000000000;
timeout.tv_usec = value%1000000000;//less than rt_period?
timeout.tv_sec = value/1000000;
timeout.tv_usec = value%1000000;//less than rt_period?
if (setsockopt(eth->sockfd[Mod_id],
SOL_SOCKET,
SO_RCVTIMEO,
(char *)&timeout,sizeof(timeout))) {
perror("[ETHERNET] setsockopt()");
} else {
printf( "receive timeout= %d,%d sec\n",timeout.tv_sec,timeout.tv_usec);
printf( "receive timeout= %u usec\n",(unsigned int)timeout.tv_usec);
}
break;
@@ -195,7 +219,7 @@ int ethernet_tune(openair0_device *device, unsigned int option, int value) {
(char *)&timeout,sizeof(timeout))) {
perror("[ETHERNET] setsockopt()");
} else {
printf( "send timeout= %d,%d sec\n",timeout.tv_sec,timeout.tv_usec);
printf( "send timeout= %d,%d sec\n",(int)timeout.tv_sec,(int)timeout.tv_usec);
}
break;
@@ -255,7 +279,7 @@ int ethernet_tune(openair0_device *device, unsigned int option, int value) {
break;
case RING_PAR:
ret=snprintf(system_cmd,sizeof(system_cmd),"ethtool -G %s rx %d tx %d",eth->if_name[Mod_id],value);
ret=snprintf(system_cmd,sizeof(system_cmd),"ethtool -G %s val %d",eth->if_name[Mod_id],value);
if (ret > 0) {
ret=system(system_cmd);
if (ret == -1) {
@@ -285,8 +309,17 @@ int transport_init(openair0_device *device, openair0_config_t *openair0_cfg, eth
if (eth_params->transp_preference == 1) {
eth->flags = ETH_RAW_MODE;
} else {
} else if (eth_params->transp_preference == 0) {
eth->flags = ETH_UDP_MODE;
} else if (eth_params->transp_preference == 3) {
eth->flags = ETH_RAW_IF4p5_MODE;
} else if (eth_params->transp_preference == 2) {
eth->flags = ETH_UDP_IF4p5_MODE;
} else if (eth_params->transp_preference == 4) {
eth->flags = ETH_RAW_IF5_MOBIPASS;
} else {
printf("transport_init: Unknown transport preference %d - default to RAW", eth_params->transp_preference);
eth->flags = ETH_RAW_MODE;
}
printf("[ETHERNET]: Initializing openair0_device for %s ...\n", ((device->host_type == BBU_HOST) ? "BBU": "RRH"));
@@ -302,20 +335,30 @@ int transport_init(openair0_device *device, openair0_config_t *openair0_cfg, eth
device->trx_set_freq_func = trx_eth_set_freq;
device->trx_set_gains_func = trx_eth_set_gains;
if ((eth->flags & ETH_RAW_MODE) != 0 ) {
if (eth->flags == ETH_RAW_MODE) {
device->trx_write_func = trx_eth_write_raw;
device->trx_read_func = trx_eth_read_raw;
} else {
} else if (eth->flags == ETH_UDP_MODE) {
device->trx_write_func = trx_eth_write_udp;
device->trx_read_func = trx_eth_read_udp;
} else if (eth->flags == ETH_RAW_IF4p5_MODE) {
device->trx_write_func = trx_eth_write_raw_IF4p5;
device->trx_read_func = trx_eth_read_raw_IF4p5;
} else if (eth->flags == ETH_UDP_IF4p5_MODE) {
device->trx_write_func = trx_eth_write_udp_IF4p5;
device->trx_read_func = trx_eth_read_udp_IF4p5;
} else if (eth->flags == ETH_RAW_IF5_MOBIPASS) {
device->trx_write_func = trx_eth_write_raw_IF4p5;
device->trx_read_func = trx_eth_read_raw_IF4p5;
} else {
//device->trx_write_func = trx_eth_write_udp_IF4p5;
//device->trx_read_func = trx_eth_read_udp_IF4p5;
}
eth->if_name[device->Mod_id] = eth_params->local_if_name;
device->priv = eth;
/* device specific */
openair0_cfg[0].txlaunch_wait = 0;//manage when TX processing is triggered
openair0_cfg[0].txlaunch_wait_slotcount = 0; //manage when TX processing is triggered
openair0_cfg[0].iq_rxrescale = 15;//rescale iqs
openair0_cfg[0].iq_txshift = eth_params->iq_txshift;// shift
openair0_cfg[0].tx_sample_advance = eth_params->tx_sample_advance;
@@ -325,26 +368,25 @@ int transport_init(openair0_device *device, openair0_config_t *openair0_cfg, eth
/*Note scheduling advance values valid only for case 7680000 */
switch ((int)openair0_cfg[0].sample_rate) {
case 30720000:
openair0_cfg[0].samples_per_packet = 4096;
openair0_cfg[0].samples_per_packet = 3840;
break;
case 23040000:
openair0_cfg[0].samples_per_packet = 2048;
openair0_cfg[0].samples_per_packet = 2880;
break;
case 15360000:
openair0_cfg[0].samples_per_packet = 2048;
openair0_cfg[0].samples_per_packet = 1920;
break;
case 7680000:
openair0_cfg[0].samples_per_packet = 1024;
openair0_cfg[0].samples_per_packet = 960;
break;
case 1920000:
openair0_cfg[0].samples_per_packet = 256;
openair0_cfg[0].samples_per_packet = 240;
break;
default:
printf("Error: unknown sampling rate %f\n",openair0_cfg[0].sample_rate);
exit(-1);
break;
}
openair0_cfg[0].tx_scheduling_advance = eth_params->tx_scheduling_advance*openair0_cfg[0].samples_per_packet;
}
device->openair0_cfg=&openair0_cfg[0];
@@ -387,11 +429,9 @@ void dump_dev(openair0_device *device) {
printf(" Log level is %i :\n" ,device->openair0_cfg->log_level);
printf(" RB number: %i, sample rate: %lf \n" ,
device->openair0_cfg->num_rb_dl, device->openair0_cfg->sample_rate);
printf(" Scheduling_advance: %i, Sample_advance: %u \n" ,
device->openair0_cfg->tx_scheduling_advance, device->openair0_cfg->tx_sample_advance);
printf(" BBU configured for %i tx/%i rx channels)\n",
device->openair0_cfg->tx_num_channels,device->openair0_cfg->rx_num_channels);
printf(" Running flags: %s %s %s\n",
printf(" Running flags: %s %s (\n",
((eth->flags & ETH_RAW_MODE) ? "RAW socket mode - ":""),
((eth->flags & ETH_UDP_MODE) ? "UDP socket mode - ":""));
printf(" Number of iqs dumped when displaying packets: %i\n\n",eth->iqdumpcnt);
@@ -401,14 +441,14 @@ void dump_dev(openair0_device *device) {
void inline dump_txcounters(openair0_device *device) {
eth_state_t *eth = (eth_state_t*)device->priv;
printf(" Ethernet device interface %i, tx counters:\n" ,device->openair0_cfg->Mod_id);
printf(" Sent packets: %llu send errors: %i\n", eth->tx_count, eth->num_tx_errors);
printf(" Sent packets: %llu send errors: %i\n", (long long unsigned int)eth->tx_count, eth->num_tx_errors);
}
void inline dump_rxcounters(openair0_device *device) {
eth_state_t *eth = (eth_state_t*)device->priv;
printf(" Ethernet device interface %i rx counters:\n" ,device->openair0_cfg->Mod_id);
printf(" Received packets: %llu missed packets errors: %i\n", eth->rx_count, eth->num_underflows);
printf(" Received packets: %llu missed packets errors: %i\n", (long long unsigned int)eth->rx_count, eth->num_underflows);
}
void inline dump_buff(openair0_device *device, char *buff,unsigned int tx_rx_flag, int nsamps) {