diff --git a/cmake_targets/autotests/README.txt b/cmake_targets/autotests/README.txt index 2a1b57c0b2..cf0e972b08 100644 --- a/cmake_targets/autotests/README.txt +++ b/cmake_targets/autotests/README.txt @@ -218,7 +218,7 @@ Obj.# Case# Test# Description 01 70 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX -01 75 00 lte-softmodem + RRH tests with B210 RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX +01 75 00 lte-softmodem + RRU (NGFI IF4P5, RAW) tests with B210 RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX 01 75 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX 01 75 01 Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX 01 75 02 Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX @@ -226,7 +226,7 @@ Obj.# Case# Test# Description 01 75 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX 01 75 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX -01 80 00 lte-softmodem + RRH tests with BladeRF RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX +01 80 00 lte-softmodem + RRU (NGFI) tests with BladeRF RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX 01 80 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX 01 80 01 Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX 01 80 02 Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX @@ -234,7 +234,7 @@ Obj.# Case# Test# Description 01 80 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX 01 80 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX -01 85 00 lte-softmodem + RRH tests with USRP X310 RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX +01 85 00 lte-softmodem + RRU (NGFI) tests with USRP X310 RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX 01 85 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX 01 85 01 Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX 01 85 02 Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX diff --git a/cmake_targets/autotests/run_exec_lte-softmodem_tests.py b/cmake_targets/autotests/run_exec_lte-softmodem_tests.py index 69a3eab7c5..a29e2870ad 100755 --- a/cmake_targets/autotests/run_exec_lte-softmodem_tests.py +++ b/cmake_targets/autotests/run_exec_lte-softmodem_tests.py @@ -631,6 +631,7 @@ def handle_testcaseclass_softmodem (testcase, oldprogramList, logdirOAI5GRepo , tags = testcase.findtext('tags',default='') RRHMachine = testcase.findtext('RRH',default='') + RRH_config_file = testcase.findtext('RRH_config_file',default='') RRH_compile_prog = testcase.findtext('RRH_compile_prog',default='') RRH_compile_prog_args = testcase.findtext('RRH_compile_prog_args',default='') RRH_pre_exec = testcase.findtext('RRH_pre_exec',default='') @@ -766,6 +767,7 @@ def handle_testcaseclass_softmodem (testcase, oldprogramList, logdirOAI5GRepo , task_RRH_compile = ' ( uname -a ; date \n' task_RRH_compile = task_RRH_compile + 'cd ' + logdirOAI5GRepo + ' ; source oaienv ; source cmake_targets/tools/build_helper \n' task_RRH_compile = task_RRH_compile + 'env |grep OPENAIR \n' + task_RRH_compile = task_RRH_compile + update_config_file(oai_RRH, RRH_config_file, logdirOAI5GRepo, '$OPENAIR_DIR/cmake_targets/autotests/tools/search_repl.py') + '\n' if RRH_compile_prog != "": task_RRH_compile = task_RRH_compile + ' ( ' + RRH_compile_prog + ' '+ RRH_compile_prog_args + ' ) > ' + logfile_compile_RRH + ' 2>&1 \n' task_RRH_compile = task_RRH_compile + ' date ) > ' + logfile_task_RRH_compile_out + ' 2>&1 ' @@ -2480,6 +2482,8 @@ for testcase in testcaseList: run_count+=1 print (Fore.WHITE + " ("+str(run_count).zfill(3)+"/"+str(nb_run_testcases).zfill(3)+") - test case "+testcasename+" : "), if testcaseclass == 'lte-softmodem' : + #First we wait for all the test cases in generic test case class to finish as they are running in parallel + threadListGlobal = wait_testcaseclass_generic_threads(threadListGlobal, Timeout_execution) eNBMachine = testcase.findtext('eNB',default='') UEMachine = testcase.findtext('UE',default='') EPCMachine = testcase.findtext('EPC',default='') @@ -2490,7 +2494,6 @@ for testcase in testcaseList: print "One of the machines is not in the machine list" print "eNBMachine : " + eNBMachine + "UEMachine : " + UEMachine + "EPCMachine : " + EPCMachine + "MachineList : " + ','.join(MachineList) print "testcasename = " + testcasename + " class = " + testcaseclass - threadListGlobal = wait_testcaseclass_generic_threads(threadListGlobal, Timeout_execution) #cleanOldProgramsAllMachines(oai_list, CleanUpOldProgs, CleanUpAluLteBox, ExmimoRfStop) handle_testcaseclass_softmodem (testcase, CleanUpOldProgs, logdirOAI5GRepo, logdirOpenaircnRepo, MachineList, user, pw, CleanUpAluLteBox, ExmimoRfStop, nruns_lte_softmodem, Timeout_cmd ) diff --git a/cmake_targets/autotests/test_case_list.xml b/cmake_targets/autotests/test_case_list.xml index f882ea7ee8..c73a5257e9 100644 --- a/cmake_targets/autotests/test_case_list.xml +++ b/cmake_targets/autotests/test_case_list.xml @@ -1,7 +1,7 @@ -mozart hutch starsky stevens amerique calisson nano +amerique mozart hutch starsky stevens calisson nano superserver /mnt/sradio/TEST_RESULTS/ https://gitlab.eurecom.fr/oai/openairinterface5g.git https://gitlab.eurecom.fr/oai/openair-cn.git @@ -11,9 +11,9 @@ sudo -S -E /opt/ltebox/tools/stop_ltebox exmimo_pci=`lspci -m | grep Xilinx`; if [ -n "$exmimo_pci" ] ; then $OPENAIR_DIR/cmake_targets/build_oai -w EXMIMO -c; sudo -S -E $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2; fi; sudo -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_huaweiE398_ue.py --reset-ue; sudo -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue; uname -a; sudo -E dmesg 36000 - 010141 0102+ 010301 010303 010304 010305 0104+ 015508 015511 015520 015523 015518 015519 015520 015521 015522 015523 015602 015605 015702 015705 015818 015819 015820 015821 015822 015823 016102 016105 016502 016505 017002 017005 017502 017505 018002 018005 018502 018505 025514 025517 025520 025523 025518 025519 025520 025521 025522 025523 + 010141 0102+ 010301 010303 010304 010305 0104+ 015508 015511 015520 015523 015518 015519 015520 015521 015522 015523 015602 015605 015702 015705 015818 015819 015820 015821 015822 015823 016102 016105 016502 016505 017002 017005 018002 018005 018502 018505 025514 025517 025520 025523 025518 025519 025520 025521 025522 025523 3 - mozart hutch starsky stevens amerique calisson + amerique mozart hutch starsky stevens calisson superserver compilation Build oaisim.Rel8 @@ -952,17 +952,17 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/lte-simulators/build/dlsim - -m5 -gF -s-1 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O70 -L + -m5 -gF -s-1 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O70 -m4 -gF -s0 -w1.0 -f.2 -n500 -B6 -c4 -z2 -O70 - -m15 -gF -s6.7 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O70 -L - -m14 -gF -s6.7 -w1.0 -f.2 -n500 -B25 -c3 -z2 -O70 -L - -m15 -gG -s6.7 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O30 -L - -m14 -gG -s1.4 -w1.0 -f.2 -n500 -B25 -c3 -z2 -O30 -L - -m25 -gF -s17.4 -w1.0 -f.2 -n500 -B25 -c3 -z2 -O70 -L - -m25 -gF -s17.5 -w1.0 -f.2 -n500 -B25 -c3 -z2 -r1022 -O70 -L - -m26 -gF -s17.7 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O70 -L - -m14 -gF -s6.8 -w1.0 -f.2 -n500 -B50 -c2 -x2 -y2 -z2 -O70 -L - -m13 -gF -s5.9 -w1.0 -f.2 -n500 -B25 -c3 -x2 -y2 -z2 -O70 -L + -m15 -gF -s6.7 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O70 + -m14 -gF -s6.7 -w1.0 -f.2 -n500 -B25 -c3 -z2 -O70 + -m15 -gG -s6.7 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O30 + -m14 -gG -s1.4 -w1.0 -f.2 -n500 -B25 -c3 -z2 -O30 + -m25 -gF -s17.4 -w1.0 -f.2 -n500 -B25 -c3 -z2 -O70 + -m25 -gF -s17.5 -w1.0 -f.2 -n500 -B25 -c3 -z2 -r1022 -O70 + -m26 -gF -s17.7 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O70 + -m14 -gF -s6.8 -w1.0 -f.2 -n500 -B50 -c2 -x2 -y2 -z2 -O70 + -m13 -gF -s5.9 -w1.0 -f.2 -n500 -B25 -c3 -x2 -y2 -z2 -O70 dlsim.test1 dlsim.test5 dlsim.test6 dlsim.test6b dlsim.test7 dlsim.test7b dlsim.test10 dlsim.test10b dlsim.test11 dlsim.TM2_test1 dlsim.TM2_test1b "passed" segmentation fault|assertion|exiting|fatal @@ -1025,7 +1025,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf @@ -1040,7 +1040,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 7Mbits/s -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 7Mbits/s @@ -1100,7 +1100,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf @@ -1115,7 +1115,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 14Mbits/s -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 14Mbits/s @@ -1175,7 +1175,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf @@ -1190,7 +1190,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 14M -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 14M @@ -1249,7 +1249,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf @@ -1322,7 +1322,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf @@ -1396,7 +1396,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf @@ -1473,7 +1473,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf @@ -1550,7 +1550,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf @@ -1626,7 +1626,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread -E + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf -E @@ -1702,7 +1702,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf @@ -1778,7 +1778,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf @@ -1855,7 +1855,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread -E + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf -E @@ -1929,7 +1929,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf @@ -2004,7 +2004,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf @@ -2079,7 +2079,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf @@ -2153,7 +2153,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf @@ -2226,7 +2226,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf @@ -2300,7 +2300,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf @@ -2379,7 +2379,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf @@ -2456,7 +2456,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf @@ -2532,7 +2532,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread -E + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf -E @@ -2608,7 +2608,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf @@ -2684,7 +2684,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf @@ -2761,7 +2761,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread -E + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf -E @@ -2854,7 +2854,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 7Mbits/s -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 7Mbits/s @@ -2938,7 +2938,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 14Mbits/s -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 14Mbits/s @@ -3022,7 +3022,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s @@ -3106,7 +3106,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m throughput_test min=00.0Mbits/sec max=10.5Mbits/sec average=11.0Mbits/sec @@ -3190,7 +3190,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m throughput_test min=0.0Mbits/sec max=21.0Mbits/sec average=22.0Mbits/sec @@ -3274,7 +3274,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m throughput_test min=0.0Mbits/sec max=42.0Mbits/sec average=44.0Mbits/sec @@ -3358,7 +3358,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 7Mbits/s -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 7Mbits/s @@ -3452,7 +3452,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 14Mbits/s -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 14Mbits/s @@ -3546,7 +3546,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s @@ -3640,7 +3640,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf3_script 1 ppp0 -c 192.172.0.1 -i 1 -u -f m -B 192.172.0.2 -b 10M -R + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf3_script 1 ppp0 -c 192.172.0.1 -i 1 -u -f m -b 10M -R throughput_test min=0.0Mbits/sec max=9Mbits/sec average=9Mbits/sec @@ -3734,7 +3734,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf3_script 1 ppp0 -c 192.172.0.1 -i 1 -u -f m -B 192.172.0.2 -b 10M -R + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf3_script 1 ppp0 -c 192.172.0.1 -i 1 -u -f m -b 10M -R throughput_test min=0.0Mbits/sec max=9Mbits/sec average=9Mbits/sec @@ -3827,7 +3827,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf3_script 1 ppp0 -c 192.172.0.1 -i 1 -u -f m -B 192.172.0.2 -b 9M -R + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf3_script 1 ppp0 -c 192.172.0.1 -i 1 -u -f m -b 9M -R throughput_test min=0.0Mbits/sec max=9Mbits/sec average=9Mbits/sec @@ -3904,7 +3904,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf @@ -3918,7 +3918,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 7Mbits/s -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 7Mbits/s @@ -3976,7 +3976,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf @@ -3990,7 +3990,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 14Mbits/s -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 14Mbits/s @@ -4048,7 +4048,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf @@ -4063,7 +4063,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 17Mbits/s -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 17Mbits/s @@ -4120,7 +4120,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf @@ -4191,7 +4191,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf @@ -4263,7 +4263,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf @@ -4334,7 +4334,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf @@ -4348,7 +4348,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -c 192.172.0.1 -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -c 192.172.0.1 @@ -4406,7 +4406,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf @@ -4420,7 +4420,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -c 192.172.0.1 -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -c 192.172.0.1 @@ -4478,7 +4478,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf @@ -4493,7 +4493,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -c 192.172.0.1 -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -c 192.172.0.1 @@ -4550,7 +4550,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf @@ -4621,7 +4621,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf @@ -4693,7 +4693,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf @@ -4766,7 +4766,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf @@ -4780,7 +4780,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 7Mbits/s -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 7Mbits/s @@ -4840,7 +4840,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf @@ -4854,7 +4854,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 14Mbits/s -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 14Mbits/s @@ -4914,7 +4914,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf @@ -4929,7 +4929,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 28Mbits/s -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 28Mbits/s @@ -4988,7 +4988,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf @@ -5061,7 +5061,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf @@ -5135,7 +5135,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf @@ -5208,7 +5208,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf @@ -5222,7 +5222,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -c 192.172.0.1 -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -c 192.172.0.1 @@ -5282,7 +5282,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf @@ -5296,7 +5296,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -c 192.172.0.1 -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -c 192.172.0.1 @@ -5356,7 +5356,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf @@ -5371,7 +5371,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -c 192.172.0.1 -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -c 192.172.0.1 @@ -5430,7 +5430,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf @@ -5503,7 +5503,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf @@ -5577,7 +5577,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf @@ -5665,7 +5665,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s @@ -5748,7 +5748,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s @@ -5911,7 +5911,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m throughput_test min=00.0Mbits/sec max=10.5Mbits/sec average=11.0Mbits/sec @@ -5992,7 +5992,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m throughput_test min=0.0Mbits/sec max=21.0Mbits/sec average=22.0Mbits/sec @@ -6074,7 +6074,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m throughput_test min=0.0Mbits/sec max=21.0Mbits/sec average=22.0Mbits/sec @@ -6140,7 +6140,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2; dmesg|tail $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf @@ -6154,7 +6154,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 7Mbits/s -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 7Mbits/s @@ -6212,7 +6212,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2 ; dmesg|tail $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf @@ -6227,7 +6227,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 14Mbits/s -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 14Mbits/s @@ -6300,7 +6300,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s @@ -6357,7 +6357,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2 ; dmesg|tail $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf @@ -6428,7 +6428,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2 ; dmesg|tail $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf @@ -6499,7 +6499,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2 ; dmesg|tail $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf @@ -6588,7 +6588,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s @@ -6671,7 +6671,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s @@ -6752,7 +6752,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s @@ -6833,7 +6833,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m throughput_test min=00.0Mbits/sec max=10.5Mbits/sec average=11.0Mbits/sec @@ -6914,7 +6914,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m throughput_test min=0.0Mbits/sec max=21.0Mbits/sec average=22.0Mbits/sec @@ -6995,7 +6995,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m throughput_test min=0.0Mbits/sec max=21.0Mbits/sec average=22.0Mbits/sec @@ -7080,7 +7080,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s @@ -7156,7 +7156,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s @@ -7231,7 +7231,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s @@ -7306,7 +7306,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m False sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue @@ -7379,7 +7379,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m throughput_test min=0.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec @@ -7454,7 +7454,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m throughput_test min=0.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec @@ -7529,7 +7529,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s @@ -7605,7 +7605,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s @@ -7680,7 +7680,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s @@ -7755,7 +7755,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m False sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue @@ -7828,7 +7828,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m throughput_test min=0.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec @@ -7903,7 +7903,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m throughput_test min=0.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec @@ -7935,67 +7935,90 @@ c lte-softmodem - calisson + superserver stevens amerique - mozart + hutch 390 /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf mobile_network_code \"92\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf downlink_frequency 2660000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf pdsch_referenceSignalPower -26 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_PORT_FOR_S1U 2152 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf rrh_gw_config "local_if_name=\"eth0\";remote_address=\"10:60:4b:75:80:83\";local_address=\"98:90:96:df:66:07\";local_port=50000;remote_port=50000;tr_preference=\"raw\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=70;tx_scheduling_advance=9;rrh_gw_active=\"yes\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf node_function \"NGFI_RCC_IF4p5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf node_timing \"synch_to_ext_device\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf node_synch_ref 0 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf N_RB_DL 25 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -24 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf nb_antenna_ports 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ue_TransmissionMode 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.19/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf rrh_gw_config "local_if_name=\"em2\";remote_address=\"00:25:90:f0:f1:2f\";local_address=\"0c:c4:7a:82:95:95\";local_port=50000;remote_port=50000;tr_preference=\"raw_if4p5\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=80;tx_scheduling_advance=9;rrh_gw_active=\"yes\";" + $OPENAIR_DIR/cmake_targets/build_oai - --eNB -w None -t ETHERNET -x -c --disable-deadline + --eNB -w None -t ETHERNET -x -c $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash - sleep 5; sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf + sleep 30; sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf False + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf node_function \"NGFI_RRU_IF4p5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf node_timing \"synch_to_ext_device\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf node_synch_ref 0 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf N_RB_DL 25 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -24 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf nb_antenna_ports 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf ue_TransmissionMode 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf rrh_gw_config "local_if_name=\"eth3\";remote_address=\"0c:c4:7a:82:95:95\";local_address=\"00:25:90:f0:f1:2f\";local_port=50000;remote_port=50000;tr_preference=\"raw_if4p5\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=80;tx_scheduling_advance=9;rrh_gw_active=\"yes\";" $OPENAIR_DIR/cmake_targets/build_oai - --RRH -w USRP -t ETHERNET -c --disable-deadline + --eNB -w USRP -t ETHERNET -c -x $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash - sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw - -n1 -x -m1 -i eth1 + sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf False - - /tmp $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash - $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c 192.172.0.1 -b 7Mbits/s False - sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue /tmp @@ -8012,10 +8035,10 @@ c $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m - throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec + throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=5.0Mbits/sec False - USRPb210.RRH.ALU_EPC.Bandrich.5MHz.FDD.Band_7.UL.1TX.1RX + USRPb210.RRH.IF4P5.ALU_EPC.SonyExperiaM4.5MHz.FDD.UDP.Band_7.UL.1TX.1RX 10 @@ -8023,65 +8046,91 @@ c lte-softmodem - calisson - mozart + superserver stevens amerique + hutch 390 /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf mobile_network_code \"92\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf N_RB_DL 50 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf downlink_frequency 2660000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf pdsch_referenceSignalPower -29 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_PORT_FOR_S1U 2152 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf rrh_gw_config "local_if_name=\"eth0\";remote_address=\"10:60:4b:75:80:83\";local_address=\"98:90:96:df:66:07\";local_port=50000;remote_port=50000;tr_preference=\"raw\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=113;tx_scheduling_advance=9;rrh_gw_active=\"yes\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf node_function \"NGFI_RCC_IF4p5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf node_timing \"synch_to_ext_device\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf node_synch_ref 0 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf N_RB_DL 50 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -27 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf nb_antenna_ports 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ue_TransmissionMode 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.19/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf rrh_gw_config "local_if_name=\"em2\";remote_address=\"00:25:90:f0:f1:2f\";local_address=\"0c:c4:7a:82:95:95\";local_port=50000;remote_port=50000;tr_preference=\"raw_if4p5\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=80;tx_scheduling_advance=9;rrh_gw_active=\"yes\";" + $OPENAIR_DIR/cmake_targets/build_oai - --eNB -w None -t ETHERNET -x -c --disable-deadline + --eNB -w None -t ETHERNET -x -c $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash - sleep 5; sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf + sleep 30; sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf False + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf node_function \"NGFI_RRU_IF4p5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf node_timing \"synch_to_ext_device\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf node_synch_ref 0 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf N_RB_DL 50 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -27 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf nb_antenna_ports 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf ue_TransmissionMode 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf rrh_gw_config "local_if_name=\"eth3\";remote_address=\"0c:c4:7a:82:95:95\";local_address=\"00:25:90:f0:f1:2f\";local_port=50000;remote_port=50000;tr_preference=\"raw_if4p5\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=80;tx_scheduling_advance=9;rrh_gw_active=\"yes\";" $OPENAIR_DIR/cmake_targets/build_oai - --RRH -w USRP -t ETHERNET -c --disable-deadline + --eNB -w USRP -t ETHERNET -c -x $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash - sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw - -n1 -x -m1 -i eth1 + sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf False + /tmp $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash - $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c 192.172.0.1 -b 14Mbits/s False - sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue /tmp @@ -8098,59 +8147,84 @@ c $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m - throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec + throughput_test min=0.0Mbits/sec max=10.0Mbits/sec average=10.0Mbits/sec False - USRPb210.RRH.ALU_EPC.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX + USRPb210.RRH.IF4P5.ALU_EPC.SonyExperiaM4.10MHz.FDD.UDP.Band_7.UL.1TX.1RX 10 lte-softmodem - calisson - mozart + superserver stevens amerique + hutch 390 /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf mobile_network_code \"92\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf N_RB_DL 100 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf downlink_frequency 2660000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf pdsch_referenceSignalPower -32 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_PORT_FOR_S1U 2152 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf rrh_gw_config "local_if_name=\"eth0\";remote_address=\"10:60:4b:75:80:83\";local_address=\"98:90:96:df:66:07\";local_port=50000;remote_port=50000;tr_preference=\"raw\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=115;tx_scheduling_advance=11;rrh_gw_active=\"yes\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf node_function \"NGFI_RCC_IF4p5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf node_timing \"synch_to_ext_device\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf node_synch_ref 0 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf N_RB_DL 100 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -30 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf nb_antenna_ports 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ue_TransmissionMode 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.19/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf rrh_gw_config "local_if_name=\"em2\";remote_address=\"00:25:90:f0:f1:2f\";local_address=\"0c:c4:7a:82:95:95\";local_port=50000;remote_port=50000;tr_preference=\"raw_if4p5\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=80;tx_scheduling_advance=9;rrh_gw_active=\"yes\";" + $OPENAIR_DIR/cmake_targets/build_oai - --eNB -w None -t ETHERNET -x -c --disable-deadline + --eNB -w None -t ETHERNET -x -c $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash - sleep 5; sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf + sleep 30; sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf False + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf node_function \"NGFI_RRU_IF4p5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf node_timing \"synch_to_ext_device\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf node_synch_ref 0 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf N_RB_DL 100 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -30 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf nb_antenna_ports 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf ue_TransmissionMode 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf rrh_gw_config "local_if_name=\"eth3\";remote_address=\"0c:c4:7a:82:95:95\";local_address=\"00:25:90:f0:f1:2f\";local_port=50000;remote_port=50000;tr_preference=\"raw_if4p5\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=80;tx_scheduling_advance=9;rrh_gw_active=\"yes\";" $OPENAIR_DIR/cmake_targets/build_oai - --RRH -w USRP -t ETHERNET -c --disable-deadline + --eNB -w USRP -t ETHERNET -c -x $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash - sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw - -n1 -x -m1 -i eth1 + sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf False /tmp @@ -8159,14 +8233,14 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash - $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c 192.172.0.1 -b 28Mbits/s False - sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue /tmp @@ -8183,76 +8257,103 @@ c $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m - throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec + throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=5.0Mbits/sec False - USRPb210.RRH.ALU_EPC.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX + USRPb210.RRH.IF4P5.ALU_EPC.SonyExperiaM4.10MHz.FDD.UDP.Band_7.UL.1TX.1RX 10 lte-softmodem - calisson - mozart + superserver stevens amerique + hutch 390 /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf mobile_network_code \"92\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf N_RB_DL 25 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf downlink_frequency 2660000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf pdsch_referenceSignalPower -26 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_PORT_FOR_S1U 2152 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf rrh_gw_config "local_if_name=\"eth0\";remote_address=\"10:60:4b:75:80:83\";local_address=\"98:90:96:df:66:07\";local_port=50000;remote_port=50000;tr_preference=\"raw\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=70;tx_scheduling_advance=9;rrh_gw_active=\"yes\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf node_function \"NGFI_RCC_IF4p5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf node_timing \"synch_to_ext_device\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf node_synch_ref 0 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf N_RB_DL 25 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -24 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf nb_antenna_ports 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ue_TransmissionMode 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.19/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf rrh_gw_config "local_if_name=\"em2\";remote_address=\"00:25:90:f0:f1:2f\";local_address=\"0c:c4:7a:82:95:95\";local_port=50000;remote_port=50000;tr_preference=\"raw_if4p5\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=80;tx_scheduling_advance=9;rrh_gw_active=\"yes\";" + $OPENAIR_DIR/cmake_targets/build_oai - --eNB -w None -t ETHERNET -x -c --disable-deadline + --eNB -w None -t ETHERNET -x -c $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash - sleep 5; sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf + sleep 30; sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf False + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf node_function \"NGFI_RRU_IF4p5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf node_timing \"synch_to_ext_device\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf node_synch_ref 0 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf N_RB_DL 25 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -24 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf nb_antenna_ports 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf ue_TransmissionMode 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf rrh_gw_config "local_if_name=\"eth3\";remote_address=\"0c:c4:7a:82:95:95\";local_address=\"00:25:90:f0:f1:2f\";local_port=50000;remote_port=50000;tr_preference=\"raw_if4p5\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=80;tx_scheduling_advance=9;rrh_gw_active=\"yes\";" $OPENAIR_DIR/cmake_targets/build_oai - --RRH -w USRP -t ETHERNET -c --disable-deadline + --eNB -w USRP -t ETHERNET -c -x $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash - sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw - -n1 -x -m1 -i eth1 + sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf False + /tmp $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash - $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -s -i 1 -u -f m - False - sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue - throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec + throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec - + False + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue + + /tmp @@ -8266,144 +8367,85 @@ c /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 - $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -c 192.172.0.2 -b 16Mbits/s -i 1 -f m -u False - USRPb210.RRH.ALU_EPC.Bandrich.5MHz.FDD.Band_7.DL.1TX.1RX + USRPb210.RRH.IF4P5.ALU_EPC.SonyExperiaM4.5MHz.FDD.UDP.Band_7.DL.1TX.1RX 10 lte-softmodem - calisson - mozart + superserver stevens amerique + hutch 390 /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf mobile_network_code \"92\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf N_RB_DL 50 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf downlink_frequency 2660000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf pdsch_referenceSignalPower -29 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_PORT_FOR_S1U 2152 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf rrh_gw_config "local_if_name=\"eth0\";remote_address=\"10:60:4b:75:80:83\";local_address=\"98:90:96:df:66:07\";local_port=50000;remote_port=50000;tr_preference=\"raw\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=113;tx_scheduling_advance=9;rrh_gw_active=\"yes\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf node_function \"NGFI_RCC_IF4p5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf node_timing \"synch_to_ext_device\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf node_synch_ref 0 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf N_RB_DL 50 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -27 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf nb_antenna_ports 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ue_TransmissionMode 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.19/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf rrh_gw_config "local_if_name=\"em2\";remote_address=\"00:25:90:f0:f1:2f\";local_address=\"0c:c4:7a:82:95:95\";local_port=50000;remote_port=50000;tr_preference=\"raw_if4p5\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=80;tx_scheduling_advance=9;rrh_gw_active=\"yes\";" + $OPENAIR_DIR/cmake_targets/build_oai - --eNB -w None -t ETHERNET -x -c --disable-deadline + --eNB -w None -t ETHERNET -x -c $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash - sleep 5; sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf + sleep 30; sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf False + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf node_function \"NGFI_RRU_IF4p5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf node_timing \"synch_to_ext_device\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf node_synch_ref 0 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf N_RB_DL 50 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -27 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf nb_antenna_ports 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf ue_TransmissionMode 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf rrh_gw_config "local_if_name=\"eth3\";remote_address=\"0c:c4:7a:82:95:95\";local_address=\"00:25:90:f0:f1:2f\";local_port=50000;remote_port=50000;tr_preference=\"raw_if4p5\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=80;tx_scheduling_advance=9;rrh_gw_active=\"yes\";" $OPENAIR_DIR/cmake_targets/build_oai - --RRH -w USRP -t ETHERNET -c --disable-deadline + --eNB -w USRP -t ETHERNET -c -x $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash - sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw - -n1 -x -m1 -i eth1 - False - - /tmp - - - $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash - - $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2 - - throughput_test min=0.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec - - False - sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue - - - /tmp - - - - - - - $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash - - /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 - - /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 - - $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s - - - False - USRPb210.RRH.ALU_EPC.Bandrich.10MHz.FDD.Band_7.DL.1TX.1RX - 10 - - - - lte-softmodem - - calisson - mozart - stevens - amerique - 390 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf mobile_network_code \"92\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf N_RB_DL 100 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf downlink_frequency 2660000000L - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf uplink_frequency_offset -120000000 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf tx_gain 90 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf rx_gain 125 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf pdsch_referenceSignalPower -32 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf frame_type \"FDD\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf nb_antennas_rx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf nb_antennas_tx 1 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf ENB_PORT_FOR_S1U 2152 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf rrh_gw_config "local_if_name=\"eth0\";remote_address=\"10:60:4b:75:80:83\";local_address=\"98:90:96:df:66:07\";local_port=50000;remote_port=50000;tr_preference=\"raw\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=115;tx_scheduling_advance=11;rrh_gw_active=\"yes\";" - $OPENAIR_DIR/cmake_targets/build_oai - --eNB -w None -t ETHERNET -x -c --disable-deadline - $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash - - sleep 5; $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf - - - - - False - - $OPENAIR_DIR/cmake_targets/build_oai - --RRH -w USRP -t ETHERNET -c --disable-deadline - $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash - - sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw - -n1 -x -m1 -i eth1 + sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf False /tmp @@ -8412,16 +8454,16 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash - $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -s -i 1 -u -f m - throughput_test min=00.0Mbits/sec max=10.0Mbits/sec average=10.0Mbits/sec + throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec False - sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue - - + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue + + /tmp @@ -8435,11 +8477,121 @@ c /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 - $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 15Mbits/s + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -c 192.172.0.2 -b 32Mbits/s -i 1 -f m -u False - USRPb210.RRH.ALU_EPC.Bandrich.20MHz.FDD.Band_7.DL.1TX.1RX + USRPb210.RRH.IF4P5.ALU_EPC.SonyExperiaM4.5MHz.FDD.UDP.Band_7.DL.1TX.1RX + 10 + + + + lte-softmodem + + superserver + stevens + amerique + hutch + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf node_function \"NGFI_RCC_IF4p5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf node_timing \"synch_to_ext_device\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf node_synch_ref 0 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf N_RB_DL 100 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -30 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf nb_antenna_ports 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ue_TransmissionMode 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.19/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.19/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf rrh_gw_config "local_if_name=\"em2\";remote_address=\"00:25:90:f0:f1:2f\";local_address=\"0c:c4:7a:82:95:95\";local_port=50000;remote_port=50000;tr_preference=\"raw_if4p5\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=80;tx_scheduling_advance=9;rrh_gw_active=\"yes\";" + + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w None -t ETHERNET -x -c + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + sleep 30; sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.usrpb210.conf + + + + + False + + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf node_function \"NGFI_RRU_IF4p5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf node_timing \"synch_to_ext_device\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf node_synch_ref 0 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf N_RB_DL 100 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -30 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf nb_antenna_ports 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf ue_TransmissionMode 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf rrh_gw_config "local_if_name=\"eth3\";remote_address=\"0c:c4:7a:82:95:95\";local_address=\"00:25:90:f0:f1:2f\";local_port=50000;remote_port=50000;tr_preference=\"raw_if4p5\";rf_preference=\"usrp_b200\";iq_txshift=4;tx_sample_advance=80;tx_scheduling_advance=9;rrh_gw_active=\"yes\";" + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -t ETHERNET -c -x + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/rru.band7.tm1.usrpb210.conf + False + + /tmp + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -s -i 1 -u -f m + + throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec + + False + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue + + + /tmp + + + + + + + $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 10 192.172.0.2 -c 192.172.0.2 -b 60Mbits/s -i 1 -f m -u + + + False + USRPb210.RRH.IF4P5.ALU_EPC.SonyExperiaM4.5MHz.FDD.UDP.Band_7.DL.1TX.1RX 10 @@ -8474,7 +8626,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf @@ -8489,7 +8641,7 @@ c sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c 192.172.0.1 -b 7Mbits/s -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c 192.172.0.1 -b 7Mbits/s @@ -8549,7 +8701,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf @@ -8564,7 +8716,7 @@ c sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c 192.172.0.1 -b 14Mbits/s -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c 192.172.0.1 -b 14Mbits/s @@ -8624,7 +8776,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf @@ -8639,7 +8791,7 @@ c sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c 192.172.0.1 -b 28Mbits/s @@ -8698,7 +8850,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf @@ -8772,7 +8924,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf @@ -8847,7 +8999,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf @@ -8921,7 +9073,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf @@ -8936,7 +9088,7 @@ c sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -c 192.172.0.1 -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -c 192.172.0.1 @@ -8996,7 +9148,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf @@ -9011,7 +9163,7 @@ c sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -c 192.172.0.1 -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -c 192.172.0.1 @@ -9071,7 +9223,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf @@ -9086,7 +9238,7 @@ c sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -c 192.172.0.1 -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -c 192.172.0.1 @@ -9145,7 +9297,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf @@ -9219,7 +9371,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -E -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread + -E -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf @@ -9294,7 +9446,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf @@ -9371,7 +9523,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf @@ -9386,7 +9538,7 @@ c sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c 192.172.0.1 -b 7Mbits/s -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c 192.172.0.1 -b 7Mbits/s @@ -9448,7 +9600,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf @@ -9463,7 +9615,7 @@ c sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c 192.172.0.1 -b 14Mbits/s -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c 192.172.0.1 -b 14Mbits/s @@ -9525,7 +9677,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread -E + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf -E @@ -9540,7 +9692,7 @@ c sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c 192.172.0.1 -b 14Mbits/s -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c 192.172.0.1 -b 14Mbits/s @@ -9601,7 +9753,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf @@ -9677,7 +9829,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf @@ -9754,7 +9906,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread -E + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf -E @@ -9830,7 +9982,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf @@ -9845,7 +9997,7 @@ c sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -c 192.172.0.1 -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -c 192.172.0.1 @@ -9907,7 +10059,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf @@ -9922,7 +10074,7 @@ c sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -c 192.172.0.1 -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -c 192.172.0.1 @@ -9984,7 +10136,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread -E + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf -E @@ -9999,7 +10151,7 @@ c sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -c 192.172.0.1 -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -c 192.172.0.1 @@ -10060,7 +10212,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf @@ -10136,7 +10288,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf @@ -10213,7 +10365,7 @@ c $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash $OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf --single-thread -E + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpb210.conf -E diff --git a/common/utils/T/T_messages.txt b/common/utils/T/T_messages.txt index 321225a597..3e3ba082dd 100644 --- a/common/utils/T/T_messages.txt +++ b/common/utils/T/T_messages.txt @@ -61,6 +61,18 @@ ID = ENB_PHY_PUCCH_1_ENERGY DESC = eNodeB PUCCH 1 energy and threshold GROUP = ALL:PHY:GRAPHIC:HEAVY:ENB FORMAT = int,eNB_ID : int,UE_ID : int,frame : int,subframe : int,energy : int,threshold +ID = ENB_PHY_PHICH + DESC = eNodeB PHICH + GROUP = ALL:PHY:ENB + FORMAT = int,eNB_ID : int,frame : int,subframe : int,UE_id : int,rnti : int,harq_pid : int,NGROUP : int,NSF : int,ngroup : int,nseq : int,ACK : int,first_rb : int,n_DMRS +ID = ENB_PHY_MSG3_ALLOCATION + DESC = eNodeB Msg3 allocation/reallocation + GROUP = ALL:PHY:ENB + FORMAT = int,eNB_ID : int,frame : int,subframe : int,UE_id : int,rnti : int,first_transmission : int,Msg3_frame : int,Msg3_subframe +ID = ENB_PHY_INITIATE_RA_PROCEDURE + DESC = eNodeB initiates a random access procedure after detecting enough energy for one of the preambles + GROUP = ALL:PHY:ENB + FORMAT = int,eNB_ID : int,frame : int,subframe : int,UE_id : int,preamble : int,energy : int,delay #MAC logs ID = ENB_MAC_UE_DL_SDU @@ -70,7 +82,7 @@ ID = ENB_MAC_UE_DL_SDU ID = ENB_MAC_UE_UL_SCHEDULE DESC = MAC uplink UE scheduling decision GROUP = ALL:MAC:ENB - FORMAT = int,eNB_ID : int,CC_id : int,rnti : int,frame : int,subframe : int,harq_pid : int,mcs : int,first_rb : int,nb_rb : int,TBS + FORMAT = int,eNB_ID : int,CC_id : int,rnti : int,frame : int,subframe : int,harq_pid : int,mcs : int,first_rb : int,nb_rb : int,TBS : int,ndi ID = ENB_MAC_UE_UL_SCHEDULE_RETRANSMISSION DESC = MAC uplink UE scheduling retransmission decision GROUP = ALL:MAC:ENB diff --git a/common/utils/T/tracer/enb.c b/common/utils/T/tracer/enb.c index 3b8e2bf14e..f041f21871 100644 --- a/common/utils/T/tracer/enb.c +++ b/common/utils/T/tracer/enb.c @@ -525,9 +525,9 @@ int main(int n, char **v) on_off(database, "ENB_PHY_PUCCH_1_ENERGY", is_on, 1); on_off(database, "ENB_PHY_PUCCH_1AB_IQ", is_on, 1); - on_off(database, "LEGACY_RRC_INFO", is_on, 1); - on_off(database, "LEGACY_RRC_ERROR", is_on, 1); - on_off(database, "LEGACY_RRC_WARNING", is_on, 1); + on_off(database, "LEGACY_GROUP_INFO", is_on, 1); + on_off(database, "LEGACY_GROUP_ERROR", is_on, 1); + on_off(database, "LEGACY_GROUP_WARNING", is_on, 1); view_add_log(eg.phyview, "ENB_PHY_DLSCH_UE_DCI", h, database, is_on); view_add_log(eg.phyview, "ENB_PHY_DLSCH_UE_ACK", h, database, is_on); diff --git a/common/utils/T/tracer/macpdu2wireshark.c b/common/utils/T/tracer/macpdu2wireshark.c index 886638f5ef..be0bbd3821 100644 --- a/common/utils/T/tracer/macpdu2wireshark.c +++ b/common/utils/T/tracer/macpdu2wireshark.c @@ -177,7 +177,7 @@ void usage(void) printf( "options:\n" " -d this option is mandatory\n" -" -in read events from this dump file\n" +" -i read events from this dump file\n" " -ip send packets to this IP address (default %s)\n" " -p send packets to this port (default %d)\n", DEFAULT_IP, @@ -205,7 +205,7 @@ int main(int n, char **v) if (!strcmp(v[i], "-h") || !strcmp(v[i], "--help")) usage(); if (!strcmp(v[i], "-d")) { if (i > n-2) usage(); database_filename = v[++i]; continue; } - if (!strcmp(v[i], "-in")) + if (!strcmp(v[i], "-i")) { if (i > n-2) usage(); input_filename = v[++i]; continue; } if (!strcmp(v[i], "-ip")) { if (i > n-2) usage(); ip = v[++i]; continue; } if (!strcmp(v[i], "-p")) {if(i>n-2)usage(); port=atoi(v[++i]); continue; } diff --git a/openair1/PHY/LTE_TRANSPORT/defs.h b/openair1/PHY/LTE_TRANSPORT/defs.h index 83b34971da..01d6cdc449 100644 --- a/openair1/PHY/LTE_TRANSPORT/defs.h +++ b/openair1/PHY/LTE_TRANSPORT/defs.h @@ -360,6 +360,10 @@ typedef struct { uint8_t TPC; /// First Allocated RB uint16_t first_rb; + /// First Allocated RB - previous scheduling + /// This is needed for PHICH generation which + /// is done after a new scheduling + uint16_t previous_first_rb; /// Current Number of RBs uint16_t nb_rb; /// Transport block size @@ -444,6 +448,10 @@ typedef struct { uint8_t Nsymb_initial; /// n_DMRS for cyclic shift of DMRS (36.213 Table 9.1.2-2) uint8_t n_DMRS; + /// n_DMRS for cyclic shift of DMRS (36.213 Table 9.1.2-2) - previous scheduling + /// This is needed for PHICH generation which + /// is done after a new scheduling + uint8_t previous_n_DMRS; /// n_DMRS 2 for cyclic shift of DMRS (36.211 Table 5.5.1.1.-1) uint8_t n_DMRS2; /// Flag to indicate that this ULSCH is for calibration information sent from UE (i.e. no MAC SDU to pass up) diff --git a/openair1/PHY/LTE_TRANSPORT/phich.c b/openair1/PHY/LTE_TRANSPORT/phich.c index 1727ec5324..6b66ee0282 100644 --- a/openair1/PHY/LTE_TRANSPORT/phich.c +++ b/openair1/PHY/LTE_TRANSPORT/phich.c @@ -1453,8 +1453,12 @@ void generate_phich_top(PHY_VARS_eNB *eNB, LOG_D(PHY,"[eNB][PUSCH %d/%x] Frame %d subframe %d (pusch_subframe %d,pusch_frame %d) phich active %d\n", harq_pid,ulsch[UE_id]->rnti,proc->frame_tx,subframe,pusch_subframe,pusch_frame,ulsch[UE_id]->harq_processes[harq_pid]->phich_active); - ngroup_PHICH = (ulsch[UE_id]->harq_processes[harq_pid]->first_rb + - ulsch[UE_id]->harq_processes[harq_pid]->n_DMRS)%Ngroup_PHICH; + /* the HARQ process may have been reused by a new scheduling, so we use + * previous values of first_rb and n_DMRS to compute ngroup_PHICH and nseq_PHICH + */ + + ngroup_PHICH = (ulsch[UE_id]->harq_processes[harq_pid]->previous_first_rb + + ulsch[UE_id]->harq_processes[harq_pid]->previous_n_DMRS)%Ngroup_PHICH; if ((frame_parms->tdd_config == 0) && (frame_parms->frame_type == TDD) ) { @@ -1462,20 +1466,28 @@ void generate_phich_top(PHY_VARS_eNB *eNB, ngroup_PHICH += Ngroup_PHICH; } - nseq_PHICH = ((ulsch[UE_id]->harq_processes[harq_pid]->first_rb/Ngroup_PHICH) + - ulsch[UE_id]->harq_processes[harq_pid]->n_DMRS)%(2*NSF_PHICH); + nseq_PHICH = ((ulsch[UE_id]->harq_processes[harq_pid]->previous_first_rb/Ngroup_PHICH) + + ulsch[UE_id]->harq_processes[harq_pid]->previous_n_DMRS)%(2*NSF_PHICH); LOG_D(PHY,"[eNB %d][PUSCH %d] Frame %d subframe %d Generating PHICH, ngroup_PHICH %d/%d, nseq_PHICH %d : HI %d, first_rb %d dci_alloc %d)\n", eNB->Mod_id,harq_pid,proc->frame_tx, subframe,ngroup_PHICH,Ngroup_PHICH,nseq_PHICH, ulsch[UE_id]->harq_processes[harq_pid]->phich_ACK, - ulsch[UE_id]->harq_processes[harq_pid]->first_rb, + ulsch[UE_id]->harq_processes[harq_pid]->previous_first_rb, ulsch[UE_id]->harq_processes[harq_pid]->dci_alloc); + T(T_ENB_PHY_PHICH, T_INT(eNB->Mod_id), T_INT(proc->frame_tx), T_INT(subframe), + T_INT(UE_id), T_INT(ulsch[UE_id]->rnti), T_INT(harq_pid), + T_INT(Ngroup_PHICH), T_INT(NSF_PHICH), + T_INT(ngroup_PHICH), T_INT(nseq_PHICH), + T_INT(ulsch[UE_id]->harq_processes[harq_pid]->phich_ACK), + T_INT(ulsch[UE_id]->harq_processes[harq_pid]->previous_first_rb), + T_INT(ulsch[UE_id]->harq_processes[harq_pid]->previous_n_DMRS)); + if (ulsch[UE_id]->Msg3_active == 1) { LOG_D(PHY,"[eNB %d][PUSCH %d][RAPROC] Frame %d, subframe %d: Generating Msg3 PHICH for UE %d, ngroup_PHICH %d/%d, nseq_PHICH %d : HI %d, first_rb %d\n", eNB->Mod_id,harq_pid,proc->frame_tx,subframe, UE_id,ngroup_PHICH,Ngroup_PHICH,nseq_PHICH,ulsch[UE_id]->harq_processes[harq_pid]->phich_ACK, - ulsch[UE_id]->harq_processes[harq_pid]->first_rb); + ulsch[UE_id]->harq_processes[harq_pid]->previous_first_rb); } if (eNB->abstraction_flag == 0) { diff --git a/openair1/PHY/LTE_TRANSPORT/ulsch_decoding.c b/openair1/PHY/LTE_TRANSPORT/ulsch_decoding.c index 80dfb69877..0ce810a52c 100644 --- a/openair1/PHY/LTE_TRANSPORT/ulsch_decoding.c +++ b/openair1/PHY/LTE_TRANSPORT/ulsch_decoding.c @@ -449,7 +449,7 @@ int ulsch_decoding_data_2thread(PHY_VARS_eNB *eNB,int UE_id,int harq_pid,int llr int16_t dummy_w[MAX_NUM_ULSCH_SEGMENTS][3*(6144+64)]; LTE_eNB_ULSCH_t *ulsch = eNB->ulsch[UE_id]; LTE_UL_eNB_HARQ_t *ulsch_harq = ulsch->harq_processes[harq_pid]; - int Q_m = get_Qm_ul(ulsch_harq->mcs); + //int Q_m = get_Qm_ul(ulsch_harq->mcs); int G = ulsch_harq->G; unsigned int E; int Cby2; @@ -657,7 +657,7 @@ int ulsch_decoding_data(PHY_VARS_eNB *eNB,int UE_id,int harq_pid,int llr8_flag) int16_t dummy_w[MAX_NUM_ULSCH_SEGMENTS][3*(6144+64)]; LTE_eNB_ULSCH_t *ulsch = eNB->ulsch[UE_id]; LTE_UL_eNB_HARQ_t *ulsch_harq = ulsch->harq_processes[harq_pid]; - int Q_m = get_Qm_ul(ulsch_harq->mcs); + //int Q_m = get_Qm_ul(ulsch_harq->mcs); int G = ulsch_harq->G; unsigned int E; @@ -1533,6 +1533,7 @@ unsigned int ulsch_decoding(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc, // CQI // printf("before cqi c[%d] = %p\n",0,ulsch_harq->c[0]); + ulsch_harq->cqi_crc_status = 0; if (Q_CQI>0) { memset((void *)&dummy_w_cc[0],0,3*(ulsch_harq->Or1+8+32)); @@ -1555,9 +1556,6 @@ unsigned int ulsch_decoding(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc, if (extract_cqi_crc(o_flip,ulsch_harq->Or1) == (crc8(o_flip,ulsch_harq->Or1)>>24)) ulsch_harq->cqi_crc_status = 1; - else - ulsch_harq->cqi_crc_status = 0; - if (ulsch->harq_processes[harq_pid]->Or1<=32) { ulsch_harq->o[3] = o_flip[0] ; diff --git a/openair1/SCHED/phy_mac_stub.c b/openair1/SCHED/phy_mac_stub.c index 939023b2c8..0ac194d051 100644 --- a/openair1/SCHED/phy_mac_stub.c +++ b/openair1/SCHED/phy_mac_stub.c @@ -70,6 +70,7 @@ void fill_dci(DCI_PDU *DCI_pdu,PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc) case 5: DCI_pdu->Num_common_dci = 1; DCI_pdu->dci_alloc[0].L = 2; + DCI_pdu->dci_alloc[0].firstCCE = 0; DCI_pdu->dci_alloc[0].rnti = SI_RNTI; DCI_pdu->dci_alloc[0].format = format1A; DCI_pdu->dci_alloc[0].ra_flag = 0; @@ -212,6 +213,7 @@ void fill_dci(DCI_PDU *DCI_pdu,PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc) case 7: DCI_pdu->Num_ue_spec_dci = 1; DCI_pdu->dci_alloc[0].L = 2; + DCI_pdu->dci_alloc[0].firstCCE = 0; DCI_pdu->dci_alloc[0].rnti = 0x1235; DCI_pdu->dci_alloc[0].format = format1; DCI_pdu->dci_alloc[0].ra_flag = 0; diff --git a/openair1/SCHED/phy_procedures_lte_eNb.c b/openair1/SCHED/phy_procedures_lte_eNb.c index 4163b8340c..6d0bc53ac8 100644 --- a/openair1/SCHED/phy_procedures_lte_eNb.c +++ b/openair1/SCHED/phy_procedures_lte_eNb.c @@ -968,6 +968,22 @@ void pdsch_procedures(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,LTE_eNB_DLSCH_t *d UE_id, eNB->ulsch[(uint32_t)UE_id]->Msg3_frame, eNB->ulsch[(uint32_t)UE_id]->Msg3_subframe); + + /* TODO: get rid of this hack. The problem is that the eNodeB may + * sometimes wrongly generate PHICH because somewhere 'phich_active' was + * not reset to 0, due to an unidentified reason. When adding this + * resetting here the problem seems to disappear completely. + */ + LOG_D(PHY, "hack: set phich_active to 0 for UE %d fsf %d %d all HARQs\n", UE_id, frame, subframe); + for (i = 0; i < 8; i++) + eNB->ulsch[(uint32_t)UE_id]->harq_processes[i]->phich_active = 0; + + mac_xface->set_msg3_subframe(eNB->Mod_id, eNB->CC_id, frame, subframe, (uint16_t)crnti, + eNB->ulsch[UE_id]->Msg3_frame, eNB->ulsch[UE_id]->Msg3_subframe); + + T(T_ENB_PHY_MSG3_ALLOCATION, T_INT(eNB->Mod_id), T_INT(frame), T_INT(subframe), + T_INT(UE_id), T_INT((uint16_t)crnti), T_INT(1 /* 1 is for initial transmission*/), + T_INT(eNB->ulsch[UE_id]->Msg3_frame), T_INT(eNB->ulsch[UE_id]->Msg3_subframe)); } if (ue_stats) ue_stats->total_TBS_MAC += dlsch_harq->TBS; } @@ -1206,6 +1222,38 @@ void phy_procedures_eNB_TX(PHY_VARS_eNB *eNB, eNB->dlsch[i][0]->subframe_tx[subframe] = 0; } + /* save old HARQ information needed for PHICH generation */ + for (i=0; iulsch[i]) { + /* Store first_rb and n_DMRS for correct PHICH generation below. + * For PHICH generation we need "old" values of last scheduling + * for this HARQ process. 'generate_eNB_dlsch_params' below will + * overwrite first_rb and n_DMRS and 'generate_phich_top', done + * after 'generate_eNB_dlsch_params', would use the "new" values + * instead of the "old" ones. + * + * This has been tested for FDD only, may be wrong for TDD. + * + * TODO: maybe we should restructure the code to be sure it + * is done correctly. The main concern is if the code + * changes and first_rb and n_DMRS are modified before + * we reach here, then the PHICH processing will be wrong, + * using wrong first_rb and n_DMRS values to compute + * ngroup_PHICH and nseq_PHICH. + * + * TODO: check if that works with TDD. + */ + if ((subframe_select(fp,ul_subframe)==SF_UL) || + (fp->frame_type == FDD)) { + harq_pid = subframe2harq_pid(fp,ul_frame,ul_subframe); + eNB->ulsch[i]->harq_processes[harq_pid]->previous_first_rb = + eNB->ulsch[i]->harq_processes[harq_pid]->first_rb; + eNB->ulsch[i]->harq_processes[harq_pid]->previous_n_DMRS = + eNB->ulsch[i]->harq_processes[harq_pid]->n_DMRS; + } + } + } + num_pdcch_symbols = DCI_pdu->num_pdcch_symbols; LOG_D(PHY,"num_pdcch_symbols %"PRIu8",(dci common %"PRIu8", dci uespec %"PRIu8"\n",num_pdcch_symbols, @@ -1927,6 +1975,9 @@ void prach_procedures(PHY_VARS_eNB *eNB) { preamble_energy_max%10, preamble_delay_list[preamble_max]); + T(T_ENB_PHY_INITIATE_RA_PROCEDURE, T_INT(eNB->Mod_id), T_INT(frame), T_INT(subframe), T_INT(UE_id), + T_INT(preamble_max), T_INT(preamble_energy_max), T_INT(preamble_delay_list[preamble_max])); + if (eNB->mac_enabled==1) { uint8_t update_TA=4; @@ -1965,11 +2016,11 @@ void prach_procedures(PHY_VARS_eNB *eNB) { VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_ENB_PRACH_RX,0); } -void pucch_procedures(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,int UE_id,int harq_pid) { - +void pucch_procedures(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,int UE_id,int harq_pid) +{ LTE_DL_FRAME_PARMS *fp=&eNB->frame_parms; uint8_t SR_payload = 0,*pucch_payload=NULL,pucch_payload0[2]= {0,0},pucch_payload1[2]= {0,0}; - int16_t n1_pucch0,n1_pucch1,n1_pucch2,n1_pucch3; + int16_t n1_pucch0 = -1, n1_pucch1 = -1, n1_pucch2 = -1, n1_pucch3 = -1; uint8_t do_SR = 0; uint8_t pucch_sel = 0; int32_t metric0=0,metric1=0,metric0_SR=0; @@ -1980,352 +2031,329 @@ void pucch_procedures(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,int UE_id,int harq if ((eNB->dlsch[UE_id][0]) && (eNB->dlsch[UE_id][0]->rnti>0) && - (eNB->ulsch[UE_id]->harq_processes[harq_pid]->subframe_scheduling_flag==0)) { + (eNB->ulsch[UE_id]->harq_processes[harq_pid]->subframe_scheduling_flag==0)) { // check SR availability do_SR = is_SR_subframe(eNB,proc,UE_id); // do_SR = 0; - + // Now ACK/NAK // First check subframe_tx flag for earlier subframes get_n1_pucch_eNB(eNB, - proc, - UE_id, - &n1_pucch0, - &n1_pucch1, - &n1_pucch2, - &n1_pucch3); - + proc, + UE_id, + &n1_pucch0, + &n1_pucch1, + &n1_pucch2, + &n1_pucch3); + LOG_D(PHY,"[eNB %d][PDSCH %x] Frame %d, subframe %d Checking for PUCCH (%d,%d,%d,%d) SR %d\n", - eNB->Mod_id,eNB->dlsch[UE_id][0]->rnti, - frame,subframe, - n1_pucch0,n1_pucch1,n1_pucch2,n1_pucch3,do_SR); - + eNB->Mod_id,eNB->dlsch[UE_id][0]->rnti, + frame,subframe, + n1_pucch0,n1_pucch1,n1_pucch2,n1_pucch3,do_SR); + if ((n1_pucch0==-1) && (n1_pucch1==-1) && (do_SR==0)) { // no TX PDSCH that have to be checked and no SR for this UE_id } else { // otherwise we have some PUCCH detection to do - + // Null out PUCCH PRBs for noise measurement switch(fp->N_RB_UL) { case 6: - eNB->rb_mask_ul[0] |= (0x1 | (1<<5)); //position 5 - break; + eNB->rb_mask_ul[0] |= (0x1 | (1<<5)); //position 5 + break; case 15: - eNB->rb_mask_ul[0] |= (0x1 | (1<<14)); // position 14 - break; + eNB->rb_mask_ul[0] |= (0x1 | (1<<14)); // position 14 + break; case 25: - eNB->rb_mask_ul[0] |= (0x1 | (1<<24)); // position 24 - break; + eNB->rb_mask_ul[0] |= (0x1 | (1<<24)); // position 24 + break; case 50: - eNB->rb_mask_ul[0] |= 0x1; - eNB->rb_mask_ul[1] |= (1<<17); // position 49 (49-32) - break; + eNB->rb_mask_ul[0] |= 0x1; + eNB->rb_mask_ul[1] |= (1<<17); // position 49 (49-32) + break; case 75: - eNB->rb_mask_ul[0] |= 0x1; - eNB->rb_mask_ul[2] |= (1<<10); // position 74 (74-64) - break; + eNB->rb_mask_ul[0] |= 0x1; + eNB->rb_mask_ul[2] |= (1<<10); // position 74 (74-64) + break; case 100: - eNB->rb_mask_ul[0] |= 0x1; - eNB->rb_mask_ul[3] |= (1<<3); // position 99 (99-96) - break; + eNB->rb_mask_ul[0] |= 0x1; + eNB->rb_mask_ul[3] |= (1<<3); // position 99 (99-96) + break; default: - LOG_E(PHY,"Unknown number for N_RB_UL %d\n",fp->N_RB_UL); - break; + LOG_E(PHY,"Unknown number for N_RB_UL %d\n",fp->N_RB_UL); + break; } - + if (do_SR == 1) { - eNB->UE_stats[UE_id].sr_total++; + eNB->UE_stats[UE_id].sr_total++; - if (eNB->abstraction_flag == 0) - metric0_SR = rx_pucch(eNB, - pucch_format1, - UE_id, - eNB->scheduling_request_config[UE_id].sr_PUCCH_ResourceIndex, - 0, // n2_pucch - 0, // shortened format, should be use_srs flag, later - &SR_payload, - frame, - subframe, - PUCCH1_THRES); - + if (eNB->abstraction_flag == 0) { + metric0_SR = rx_pucch(eNB, + pucch_format1, + UE_id, + eNB->scheduling_request_config[UE_id].sr_PUCCH_ResourceIndex, + 0, // n2_pucch + 0, // shortened format, should be use_srs flag, later + &SR_payload, + frame, + subframe, + PUCCH1_THRES); + LOG_D(PHY,"[eNB %d][SR %x] Frame %d subframe %d Checking SR is %d (SR n1pucch is %d)\n", + eNB->Mod_id, + eNB->ulsch[UE_id]->rnti, + frame, + subframe, + SR_payload, + eNB->scheduling_request_config[UE_id].sr_PUCCH_ResourceIndex); + } #ifdef PHY_ABSTRACTION - else { - metric0_SR = rx_pucch_emul(eNB, - proc, - UE_id, - pucch_format1, - 0, - &SR_payload); - LOG_D(PHY,"[eNB %d][SR %x] Frame %d subframe %d Checking SR (UE SR %d/%d)\n",eNB->Mod_id, - eNB->ulsch[UE_id]->rnti,frame,subframe,SR_payload,eNB->scheduling_request_config[UE_id].sr_PUCCH_ResourceIndex); - } - + else { + metric0_SR = rx_pucch_emul(eNB, + proc, + UE_id, + pucch_format1, + 0, + &SR_payload); + LOG_D(PHY,"[eNB %d][SR %x] Frame %d subframe %d Checking SR (UE SR %d/%d)\n",eNB->Mod_id, + eNB->ulsch[UE_id]->rnti,frame,subframe,SR_payload,eNB->scheduling_request_config[UE_id].sr_PUCCH_ResourceIndex); + } #endif - - if (SR_payload == 1) { - LOG_D(PHY,"[eNB %d][SR %x] Frame %d subframe %d Got SR for PUSCH, transmitting to MAC\n",eNB->Mod_id, - eNB->ulsch[UE_id]->rnti,frame,subframe); - eNB->UE_stats[UE_id].sr_received++; - - if (eNB->first_sr[UE_id] == 1) { // this is the first request for uplink after Connection Setup, so clear HARQ process 0 use for Msg4 - eNB->first_sr[UE_id] = 0; - eNB->dlsch[UE_id][0]->harq_processes[0]->round=0; - eNB->dlsch[UE_id][0]->harq_processes[0]->status=SCH_IDLE; - LOG_D(PHY,"[eNB %d][SR %x] Frame %d subframe %d First SR\n", - eNB->Mod_id, - eNB->ulsch[UE_id]->rnti,frame,subframe); - } - - if (eNB->mac_enabled==1) { - mac_xface->SR_indication(eNB->Mod_id, - eNB->CC_id, - frame, - eNB->dlsch[UE_id][0]->rnti,subframe); - } - } }// do_SR==1 - + if ((n1_pucch0==-1) && (n1_pucch1==-1)) { // just check for SR - } else if (eNB->frame_parms.frame_type==FDD) { // FDD - // if SR was detected, use the n1_pucch from SR, else use n1_pucch0 - // n1_pucch0 = (SR_payload==1) ? eNB->scheduling_request_config[UE_id].sr_PUCCH_ResourceIndex:n1_pucch0; - - LOG_D(PHY,"Demodulating PUCCH for ACK/NAK: n1_pucch0 %d (%d), SR_payload %d\n",n1_pucch0,eNB->scheduling_request_config[UE_id].sr_PUCCH_ResourceIndex,SR_payload); - - if (eNB->abstraction_flag == 0) { - - - - metric0 = rx_pucch(eNB, - pucch_format1a, - UE_id, - (uint16_t)n1_pucch0, - 0, //n2_pucch - 0, // shortened format - pucch_payload0, - frame, - subframe, - PUCCH1a_THRES); - - if (metric0 < metric0_SR) - metric0=rx_pucch(eNB, - pucch_format1a, - UE_id, - eNB->scheduling_request_config[UE_id].sr_PUCCH_ResourceIndex, - 0, //n2_pucch - 0, // shortened format - pucch_payload0, - frame, - subframe, - PUCCH1a_THRES); - - } - - if (eNB->mac_enabled==1) { - mac_xface->SR_indication(eNB->Mod_id, - eNB->CC_id, - frame, - eNB->dlsch[UE_id][0]->rnti,subframe); - } - } - }// do_SR==1 - - if ((n1_pucch0==-1) && (n1_pucch1==-1)) { // just check for SR - } else if (fp->frame_type==FDD) { // FDD - // if SR was detected, use the n1_pucch from SR, else use n1_pucch0 - // n1_pucch0 = (SR_payload==1) ? eNB->scheduling_request_config[UE_id].sr_PUCCH_ResourceIndex:n1_pucch0; - - LOG_D(PHY,"Demodulating PUCCH for ACK/NAK: n1_pucch0 %d (%d), SR_payload %d\n",n1_pucch0,eNB->scheduling_request_config[UE_id].sr_PUCCH_ResourceIndex,SR_payload); - - if (eNB->abstraction_flag == 0) { - - - - metric0 = rx_pucch(eNB, - pucch_format1a, - UE_id, - (uint16_t)n1_pucch0, - 0, //n2_pucch - 0, // shortened format - pucch_payload0, - frame, - subframe, - PUCCH1a_THRES); - - if (metric0 < metric0_SR) - metric0=rx_pucch(eNB, - pucch_format1a, - UE_id, - eNB->scheduling_request_config[UE_id].sr_PUCCH_ResourceIndex, - 0, //n2_pucch - 0, // shortened format - pucch_payload0, - frame, - subframe, - PUCCH1a_THRES); - } - else { + } else if (fp->frame_type==FDD) { // FDD + // if SR was detected, use the n1_pucch from SR, else use n1_pucch0 + // n1_pucch0 = (SR_payload==1) ? eNB->scheduling_request_config[UE_id].sr_PUCCH_ResourceIndex:n1_pucch0; + + LOG_D(PHY,"Demodulating PUCCH for ACK/NAK: n1_pucch0 %d (%d), SR_payload %d\n",n1_pucch0,eNB->scheduling_request_config[UE_id].sr_PUCCH_ResourceIndex,SR_payload); + + if (eNB->abstraction_flag == 0) { + metric0 = rx_pucch(eNB, + pucch_format1a, + UE_id, + (uint16_t)n1_pucch0, + 0, //n2_pucch + 0, // shortened format + pucch_payload0, + frame, + subframe, + PUCCH1a_THRES); + } #ifdef PHY_ABSTRACTION - metric0 = rx_pucch_emul(eNB, - proc, - UE_id, - pucch_format1a, - 0, - pucch_payload0); -#endif - } - -#ifdef DEBUG_PHY_PROC - LOG_D(PHY,"[eNB %d][PDSCH %x] Frame %d subframe %d pucch1a (FDD) payload %d (metric %d)\n", - eNB->Mod_id, - eNB->dlsch[UE_id][0]->rnti, - frame,subframe, - pucch_payload0[0],metric0); -#endif - - process_HARQ_feedback(UE_id,eNB,proc, - 0,// pusch_flag - pucch_payload0, - 2, - SR_payload); - - } // FDD - else { //TDD - - bundling_flag = eNB->pucch_config_dedicated[UE_id].tdd_AckNackFeedbackMode; - - // fix later for 2 TB case and format1b - - if ((fp->frame_type==FDD) || - (bundling_flag==bundling) || - ((fp->frame_type==TDD)&&(fp->tdd_config==1)&&((subframe!=2)||(subframe!=7)))) { - format = pucch_format1a; - } else { - format = pucch_format1b; - } - - // if SR was detected, use the n1_pucch from SR - if (SR_payload==1) { -#ifdef DEBUG_PHY_PROC - LOG_D(PHY,"[eNB %d][PDSCH %x] Frame %d subframe %d Checking ACK/NAK (%d,%d,%d,%d) format %d with SR\n",eNB->Mod_id, - eNB->dlsch[UE_id][0]->rnti, - frame,subframe, - n1_pucch0,n1_pucch1,n1_pucch2,n1_pucch3,format); + else { + metric0 = rx_pucch_emul(eNB, + proc, + UE_id, + pucch_format1a, + 0, + pucch_payload0); + } #endif - if (eNB->abstraction_flag == 0) - metric0_SR = rx_pucch(eNB, - format, - UE_id, - eNB->scheduling_request_config[UE_id].sr_PUCCH_ResourceIndex, - 0, //n2_pucch - 0, // shortened format - pucch_payload0, - frame, - subframe, - PUCCH1a_THRES); - else { + /* cancel SR detection if reception on n1_pucch0 is better than on SR PUCCH resource index */ + if (do_SR && metric0 > metric0_SR) SR_payload = 0; + + if (do_SR && metric0 <= metric0_SR) { + /* when transmitting ACK/NACK on SR PUCCH resource index, SR payload is always 1 */ + SR_payload = 1; + + if (eNB->abstraction_flag == 0) { + metric0=rx_pucch(eNB, + pucch_format1a, + UE_id, + eNB->scheduling_request_config[UE_id].sr_PUCCH_ResourceIndex, + 0, //n2_pucch + 0, // shortened format + pucch_payload0, + frame, + subframe, + PUCCH1a_THRES); + } #ifdef PHY_ABSTRACTION - metric0 = rx_pucch_emul(eNB,proc, - UE_id, - format, - 0, - pucch_payload0); + else { + metric0 = rx_pucch_emul(eNB, + proc, + UE_id, + pucch_format1a, + 0, + pucch_payload0); + } #endif - } - } else { //using n1_pucch0/n1_pucch1 resources -#ifdef DEBUG_PHY_PROC - LOG_D(PHY,"[eNB %d][PDSCH %x] Frame %d subframe %d Checking ACK/NAK (%d,%d,%d,%d) format %d\n",eNB->Mod_id, - eNB->dlsch[UE_id][0]->rnti, - frame,subframe, - n1_pucch0,n1_pucch1,n1_pucch2,n1_pucch3,format); -#endif - metric0=0; - metric1=0; - - // Check n1_pucch0 metric - if (n1_pucch0 != -1) { - if (eNB->abstraction_flag == 0) - metric0 = rx_pucch(eNB, - format, - UE_id, - (uint16_t)n1_pucch0, - 0, // n2_pucch - 0, // shortened format - pucch_payload0, - frame, - subframe, - PUCCH1a_THRES); - else { -#ifdef PHY_ABSTRACTION - metric0 = rx_pucch_emul(eNB, - proc, - UE_id, - format, - 0, - pucch_payload0); -#endif - } - } - - // Check n1_pucch1 metric - if (n1_pucch1 != -1) { - if (eNB->abstraction_flag == 0) - metric1 = rx_pucch(eNB, - format, - UE_id, - (uint16_t)n1_pucch1, - 0, //n2_pucch - 0, // shortened format - pucch_payload1, - frame, - subframe, - PUCCH1a_THRES); - else { -#ifdef PHY_ABSTRACTION - metric1 = rx_pucch_emul(eNB, - proc, - UE_id, - format, - 1, - pucch_payload1); -#endif - } - } - } - - if (SR_payload == 1) { - pucch_payload = pucch_payload0; - - if (bundling_flag == bundling) - pucch_sel = 2; - } else if (bundling_flag == multiplexing) { // multiplexing + no SR - pucch_payload = (metric1>metric0) ? pucch_payload1 : pucch_payload0; - pucch_sel = (metric1>metric0) ? 1 : 0; - } else { // bundling + no SR - if (n1_pucch1 != -1) - pucch_payload = pucch_payload1; - else if (n1_pucch0 != -1) - pucch_payload = pucch_payload0; - - pucch_sel = 2; // indicate that this is a bundled ACK/NAK - } + } #ifdef DEBUG_PHY_PROC - LOG_D(PHY,"[eNB %d][PDSCH %x] Frame %d subframe %d ACK/NAK metric 0 %d, metric 1 %d, sel %d, (%d,%d)\n",eNB->Mod_id, - eNB->dlsch[UE_id][0]->rnti, - frame,subframe, - metric0,metric1,pucch_sel,pucch_payload[0],pucch_payload[1]); + LOG_D(PHY,"[eNB %d][PDSCH %x] Frame %d subframe %d pucch1a (FDD) payload %d (metric %d)\n", + eNB->Mod_id, + eNB->dlsch[UE_id][0]->rnti, + frame,subframe, + pucch_payload0[0],metric0); #endif - process_HARQ_feedback(UE_id,eNB,proc, - 0,// pusch_flag - pucch_payload, - pucch_sel, - SR_payload); + + process_HARQ_feedback(UE_id,eNB,proc, + 0,// pusch_flag + pucch_payload0, + 2, + SR_payload); + } // FDD + else { //TDD + + bundling_flag = eNB->pucch_config_dedicated[UE_id].tdd_AckNackFeedbackMode; + + // fix later for 2 TB case and format1b + + if ((fp->frame_type==FDD) || + (bundling_flag==bundling) || + ((fp->frame_type==TDD)&&(fp->tdd_config==1)&&((subframe!=2)||(subframe!=7)))) { + format = pucch_format1a; + } else { + format = pucch_format1b; + } + + // if SR was detected, use the n1_pucch from SR + if (SR_payload==1) { +#ifdef DEBUG_PHY_PROC + LOG_D(PHY,"[eNB %d][PDSCH %x] Frame %d subframe %d Checking ACK/NAK (%d,%d,%d,%d) format %d with SR\n",eNB->Mod_id, + eNB->dlsch[UE_id][0]->rnti, + frame,subframe, + n1_pucch0,n1_pucch1,n1_pucch2,n1_pucch3,format); +#endif + + if (eNB->abstraction_flag == 0) + metric0 = rx_pucch(eNB, + format, + UE_id, + eNB->scheduling_request_config[UE_id].sr_PUCCH_ResourceIndex, + 0, //n2_pucch + 0, // shortened format + pucch_payload0, + frame, + subframe, + PUCCH1a_THRES); + else { +#ifdef PHY_ABSTRACTION + metric0 = rx_pucch_emul(eNB,proc, + UE_id, + format, + 0, + pucch_payload0); +#endif + } + } else { //using n1_pucch0/n1_pucch1 resources +#ifdef DEBUG_PHY_PROC + LOG_D(PHY,"[eNB %d][PDSCH %x] Frame %d subframe %d Checking ACK/NAK (%d,%d,%d,%d) format %d\n",eNB->Mod_id, + eNB->dlsch[UE_id][0]->rnti, + frame,subframe, + n1_pucch0,n1_pucch1,n1_pucch2,n1_pucch3,format); +#endif + metric0=0; + metric1=0; + + // Check n1_pucch0 metric + if (n1_pucch0 != -1) { + if (eNB->abstraction_flag == 0) + metric0 = rx_pucch(eNB, + format, + UE_id, + (uint16_t)n1_pucch0, + 0, // n2_pucch + 0, // shortened format + pucch_payload0, + frame, + subframe, + PUCCH1a_THRES); + else { +#ifdef PHY_ABSTRACTION + metric0 = rx_pucch_emul(eNB, + proc, + UE_id, + format, + 0, + pucch_payload0); +#endif + } + } + + // Check n1_pucch1 metric + if (n1_pucch1 != -1) { + if (eNB->abstraction_flag == 0) + metric1 = rx_pucch(eNB, + format, + UE_id, + (uint16_t)n1_pucch1, + 0, //n2_pucch + 0, // shortened format + pucch_payload1, + frame, + subframe, + PUCCH1a_THRES); + else { +#ifdef PHY_ABSTRACTION + metric1 = rx_pucch_emul(eNB, + proc, + UE_id, + format, + 1, + pucch_payload1); +#endif + } + } + } + + if (SR_payload == 1) { + pucch_payload = pucch_payload0; + + if (bundling_flag == bundling) + pucch_sel = 2; + } else if (bundling_flag == multiplexing) { // multiplexing + no SR + pucch_payload = (metric1>metric0) ? pucch_payload1 : pucch_payload0; + pucch_sel = (metric1>metric0) ? 1 : 0; + } else { // bundling + no SR + if (n1_pucch1 != -1) + pucch_payload = pucch_payload1; + else if (n1_pucch0 != -1) + pucch_payload = pucch_payload0; + + pucch_sel = 2; // indicate that this is a bundled ACK/NAK + } + +#ifdef DEBUG_PHY_PROC + LOG_D(PHY,"[eNB %d][PDSCH %x] Frame %d subframe %d ACK/NAK metric 0 %d, metric 1 %d, sel %d, (%d,%d)\n",eNB->Mod_id, + eNB->dlsch[UE_id][0]->rnti, + frame,subframe, + metric0,metric1,pucch_sel,pucch_payload[0],pucch_payload[1]); +#endif + process_HARQ_feedback(UE_id,eNB,proc, + 0,// pusch_flag + pucch_payload, + pucch_sel, + SR_payload); + } // TDD } - } + + if (SR_payload == 1) { + LOG_D(PHY,"[eNB %d][SR %x] Frame %d subframe %d Got SR for PUSCH, transmitting to MAC\n",eNB->Mod_id, + eNB->ulsch[UE_id]->rnti,frame,subframe); + eNB->UE_stats[UE_id].sr_received++; + + if (eNB->first_sr[UE_id] == 1) { // this is the first request for uplink after Connection Setup, so clear HARQ process 0 use for Msg4 + eNB->first_sr[UE_id] = 0; + eNB->dlsch[UE_id][0]->harq_processes[0]->round=0; + eNB->dlsch[UE_id][0]->harq_processes[0]->status=SCH_IDLE; + LOG_D(PHY,"[eNB %d][SR %x] Frame %d subframe %d First SR\n", + eNB->Mod_id, + eNB->ulsch[UE_id]->rnti,frame,subframe); + } + + if (eNB->mac_enabled==1) { + mac_xface->SR_indication(eNB->Mod_id, + eNB->CC_id, + frame, + eNB->dlsch[UE_id][0]->rnti,subframe); + } + } + } } @@ -3027,6 +3055,13 @@ void phy_procedures_eNB_uespec_RX(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,const frame, &eNB->ulsch[i]->Msg3_frame, &eNB->ulsch[i]->Msg3_subframe); + + mac_xface->set_msg3_subframe(eNB->Mod_id, eNB->CC_id, frame, subframe, eNB->ulsch[i]->rnti, + eNB->ulsch[i]->Msg3_frame, eNB->ulsch[i]->Msg3_subframe); + + T(T_ENB_PHY_MSG3_ALLOCATION, T_INT(eNB->Mod_id), T_INT(frame), T_INT(subframe), + T_INT(i), T_INT(eNB->ulsch[i]->rnti), T_INT(0 /* 0 is for retransmission*/), + T_INT(eNB->ulsch[i]->Msg3_frame), T_INT(eNB->ulsch[i]->Msg3_subframe)); } LOG_D(PHY,"[eNB] Frame %d, Subframe %d: Msg3 in error, i = %d \n", frame,subframe,i); } // This is Msg3 error diff --git a/openair1/SIMULATION/LTE_PHY/dlsim.c b/openair1/SIMULATION/LTE_PHY/dlsim.c index 40faf1049f..96c533bde5 100644 --- a/openair1/SIMULATION/LTE_PHY/dlsim.c +++ b/openair1/SIMULATION/LTE_PHY/dlsim.c @@ -2420,7 +2420,7 @@ int main(int argc, char **argv) phy_procedures_UE_RX(UE,proc,0,0,normal_txrx,no_relay,NULL); if (UE->dlsch[0][0]->active == 0) { - printf("DCI not received\n"); + //printf("DCI not received\n"); /* write_output("pdcchF0_ext.m","pdcchF_ext", UE->pdcch_vars[eNB_id]->rxdataF_ext[0],2*3*UE->frame_parms.ofdm_symbol_size,1,1); write_output("pdcch00_ch0_ext.m","pdcch00_ch0_ext",UE->pdcch_vars[eNB_id]->dl_ch_estimates_ext[0],12*UE->frame_parms.N_RB_DL*3,1,1); diff --git a/openair2/LAYER2/MAC/eNB_scheduler_RA.c b/openair2/LAYER2/MAC/eNB_scheduler_RA.c index 0da90652c0..23ba001d4c 100644 --- a/openair2/LAYER2/MAC/eNB_scheduler_RA.c +++ b/openair2/LAYER2/MAC/eNB_scheduler_RA.c @@ -259,7 +259,8 @@ void schedule_RA(module_id_t module_idP,frame_t frameP, sub_frame_t subframeP,un RA_template->RA_dci_fmt1, 1); - RA_template->Msg3_subframe=Msg3_subframe; + /* this will be updated when PHY calls set_msg3_subframe */ + RA_template->Msg3_subframe = -1; } } else if (RA_template->generate_Msg4 == 1) { diff --git a/openair2/LAYER2/MAC/eNB_scheduler_ulsch.c b/openair2/LAYER2/MAC/eNB_scheduler_ulsch.c index a65ec917de..671e95aec5 100644 --- a/openair2/LAYER2/MAC/eNB_scheduler_ulsch.c +++ b/openair2/LAYER2/MAC/eNB_scheduler_ulsch.c @@ -601,6 +601,29 @@ unsigned char *parse_ulsch_header(unsigned char *mac_header, return(mac_header_ptr); } +/* This function is called by PHY layer when it schedules some + * uplink for a random access message 3. + * The MAC scheduler has to skip the RBs used by this message 3 + * (done below in schedule_ulsch). + */ +void set_msg3_subframe(module_id_t Mod_id, + int CC_id, + int frame, + int subframe, + int rnti, + int Msg3_frame, + int Msg3_subframe) +{ + eNB_MAC_INST *eNB=&eNB_mac_inst[Mod_id]; + int i; + for (i=0; icommon_channels[CC_id].RA_template[i].RA_active == TRUE && + eNB->common_channels[CC_id].RA_template[i].rnti == rnti) { + eNB->common_channels[CC_id].RA_template[i].Msg3_subframe = Msg3_subframe; + break; + } + } +} void schedule_ulsch(module_id_t module_idP, frame_t frameP, @@ -619,6 +642,7 @@ void schedule_ulsch(module_id_t module_idP, for (CC_id=0; CC_idcommon_channels[CC_id].RA_template[i].RA_active == TRUE) && (eNB->common_channels[CC_id].RA_template[i].generate_rar == 0) && + (eNB->common_channels[CC_id].RA_template[i].generate_Msg4 == 0) && + (eNB->common_channels[CC_id].RA_template[i].wait_ack_Msg4 == 0) && (eNB->common_channels[CC_id].RA_template[i].Msg3_subframe == sched_subframe)) { - //leave out first RB for PUCCH first_rb[CC_id]++; + eNB->common_channels[CC_id].RA_template[i].Msg3_subframe = -1; break; } } @@ -854,7 +880,7 @@ void schedule_ulsch_rnti(module_id_t module_idP, T(T_ENB_MAC_UE_UL_SCHEDULE, T_INT(module_idP), T_INT(CC_id), T_INT(rnti), T_INT(frameP), T_INT(subframeP), T_INT(harq_pid), T_INT(mcs), T_INT(first_rb[CC_id]), T_INT(rb_table[rb_table_index]), - T_INT(TBS)); + T_INT(TBS), T_INT(ndi)); // bad indices : 20 (40 PRB), 21 (45 PRB), 22 (48 PRB) // increment for next UE allocation diff --git a/openair2/LAYER2/MAC/main.c b/openair2/LAYER2/MAC/main.c index 4fee906f74..0fe9d63b6f 100644 --- a/openair2/LAYER2/MAC/main.c +++ b/openair2/LAYER2/MAC/main.c @@ -454,6 +454,7 @@ int l2_init(LTE_DL_FRAME_PARMS *frame_parms,int eMBMS_active, char *uecap_xer,ui mac_xface->fill_rar = fill_rar; mac_xface->initiate_ra_proc = initiate_ra_proc; mac_xface->cancel_ra_proc = cancel_ra_proc; + mac_xface->set_msg3_subframe = set_msg3_subframe; mac_xface->SR_indication = SR_indication; mac_xface->UL_failure_indication = UL_failure_indication; mac_xface->rx_sdu = rx_sdu; diff --git a/openair2/LAYER2/MAC/proto.h b/openair2/LAYER2/MAC/proto.h index 59d6c352fe..4df0c6fa45 100644 --- a/openair2/LAYER2/MAC/proto.h +++ b/openair2/LAYER2/MAC/proto.h @@ -246,6 +246,25 @@ unsigned short fill_rar( */ void cancel_ra_proc(module_id_t module_idP,int CC_id,frame_t frameP, uint16_t preamble_index); +/* \brief Function used by PHY to inform MAC that an uplink is scheduled + for Msg3 in given subframe. This is used so that the MAC + scheduler marks as busy the RBs used by the Msg3. +@param Mod_id Instance ID of eNB +@param CC_id CC ID of eNB +@param frame current frame +@param subframe current subframe +@param rnti UE rnti concerned +@param Msg3_frame frame where scheduling takes place +@param Msg3_subframe subframe where scheduling takes place +*/ +void set_msg3_subframe(module_id_t Mod_id, + int CC_id, + int frame, + int subframe, + int rnti, + int Msg3_frame, + int Msg3_subframe); + /* \brief Function to indicate a received SDU on ULSCH. @param Mod_id Instance ID of eNB @param rnti RNTI of UE transmitting the SR diff --git a/openair2/PHY_INTERFACE/defs.h b/openair2/PHY_INTERFACE/defs.h index 0892b4d0b1..8c711e971d 100644 --- a/openair2/PHY_INTERFACE/defs.h +++ b/openair2/PHY_INTERFACE/defs.h @@ -72,6 +72,16 @@ typedef struct { /// cancel an ongoing RA procedure void (*cancel_ra_proc)(module_id_t Mod_id,int CC_id,frame_t frameP,uint16_t preamble); + /// Inform MAC layer that an uplink is scheduled for Msg3 in given subframe. + /// This is used so that the MAC scheduler marks as busy the RBs used by the Msg3. + void (*set_msg3_subframe)(module_id_t Mod_id, + int CC_id, + int frame, + int subframe, + int rnti, + int Msg3_frame, + int Msg3_subframe); + /// Get DCI for current subframe from MAC DCI_PDU* (*get_dci_sdu)(module_id_t Mod_id,int CC_id,frame_t frameP,sub_frame_t subframe); diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band38.tm1.exmimo2.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band38.tm1.exmimo2.conf index 3c608776d6..8bf870f0a5 100644 --- a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band38.tm1.exmimo2.conf +++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band38.tm1.exmimo2.conf @@ -38,8 +38,9 @@ eNBs = Nid_cell_mbsfn = 0; nb_antennas_tx = 1; nb_antennas_rx = 1; - tx_gain = 10;//25; - rx_gain = 120; + nb_antenna_ports = 1; + tx_gain = 10; //25; + rx_gain = 10; //20; prach_root = 0; prach_config_index = 0; prach_high_speed = "DISABLE"; @@ -100,6 +101,8 @@ eNBs = ue_TimersAndConstants_t311 = 10000; ue_TimersAndConstants_n310 = 20; ue_TimersAndConstants_n311 = 1; + + ue_TransmissionMode = 1; } ); diff --git a/targets/RT/USER/lte-enb.c b/targets/RT/USER/lte-enb.c index 0741d88c42..8f636d20d6 100644 --- a/targets/RT/USER/lte-enb.c +++ b/targets/RT/USER/lte-enb.c @@ -1775,7 +1775,7 @@ void init_eNB(eNB_func_t node_function[], eNB_timing_t node_timing[],int nb_inst } } - if (setup_eNB_buffers(PHY_vars_eNB_g[inst],&openair0_cfg[CC_id])!=0) { + if (setup_eNB_buffers(PHY_vars_eNB_g[inst],&openair0_cfg[0])!=0) { printf("Exiting, cannot initialize eNodeB Buffers\n"); exit(-1); }