maki/openairinterface5g
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

remove used definitions, and group dupilcated extern for cpuf global var

Browse Source
This commit is contained in:
Laurent THOMAS
2026-01-23 10:57:44 +01:00
parent ed4cca814a
commit 7e0440433a
12 changed files with 39 additions and 163 deletions
Download Patch File Download Diff File Expand all files Collapse all files
executables/softmodem-common.h
+12 -25
View File
@@ -40,14 +40,13 @@ extern "C"
#include "common/config/config_load_configmodule.h"
/* help strings definition for command line options, used in CMDLINE_XXX_DESC macros and printed when -h option is used */
#define CONFIG_HLP_RFCFGF "Configuration file for front-end (e.g. LMS7002M)\n"
#define CONFIG_HLP_SPLIT73 "Split 7.3 (below rate matching) option: <cu|du>:<remote ip address>:<remote port>\n"
#define CONFIG_HLP_TPOOL "Thread pool configuration: \n\
#define CONFIG_HLP_RFCFGF "Configuration file for front-end (e.g. LMS7002M)\n"
#define CONFIG_HLP_TPOOL \
"Thread pool configuration: \n\
list of cores, comma separated (negative value is no core affinity)\n\
example: -1,3 launches two working threads one floating, the second set on core 3\n\
default 8 floating threads\n\
use N for no pool (runs in calling thread) recommended with rfsim.\n"
#define CONFIG_HLP_ULMAXE "set the eNodeB max ULSCH erros\n"
#define CONFIG_HLP_CALUER "set UE RX calibration\n"
#define CONFIG_HLP_CALUERM ""
#define CONFIG_HLP_CALUERB ""
@@ -59,40 +58,29 @@ extern "C"
#define CONFIG_HLP_DUMPFRAME "dump UE received frame to rxsig_frame0.dat and exit\n"
#define CONFIG_HLP_PHYTST "test UE phy layer, mac disabled\n"
#define CONFIG_HLP_DORA "test gNB and UE with RA procedures\n"
#define CONFIG_HLP_SA "run gNB in standalone mode\n"
#define CONFIG_HLP_SL_MODE "sets the NR sidelink mode (0: not in sidelink mode, 1: in-coverage/gNB, 2: out-of-coverage/no gNB)\n"
#define CONFIG_HLP_EXTS "tells hardware to use an external timing reference\n"
#define CONFIG_HLP_DMRSSYNC "tells RU to insert DMRS in subframe 1 slot 0"
#define CONFIG_HLP_SL_MODE "sets the NR sidelink mode (0: not in sidelink mode, 1: in-coverage/gNB, 2: out-of-coverage/no gNB)\n"
#define CONFIG_HLP_CLK "tells hardware to use a clock reference (0:internal, 1:external, 2:gpsdo)\n"
#define CONFIG_HLP_TME "tells hardware to use a time reference (0:internal, 1:external, 2:gpsdo)\n"
#define CONFIG_HLP_TUNE_OFFSET "LO tuning offset to use in Hz\n"
#define CONFIG_HLP_NOSNGLT "Disables single-thread mode in lte-softmodem\n"
#define CONFIG_HLP_TUNE_OFFSET "LO tuning offset to use in Hz\n"
#define CONFIG_HLP_DLF "Set the downlink frequency for all component carriers\n"
#define CONFIG_HLP_ULF "Set the uplink frequency offset for all component carriers\n"
#define CONFIG_HLP_SLF "Set the sidelink frequency for all component carriers\n"
#define CONFIG_HLP_CHOFF "Channel id offset\n"
#define CONFIG_HLP_SOFTS "Enable soft scope and L1 and L2 stats (Xforms)\n"
#define CONFIG_HLP_ITTIL "Generate ITTI analyzser logs (similar to wireshark logs but with more details)\n"
#define CONFIG_HLP_SOFTS "Enable soft scope and L1 and L2 stats (Xforms)\n"
#define CONFIG_HLP_DLMCS "Set the maximum downlink MCS\n"
#define CONFIG_HLP_STMON "Enable processing timing measurement of lte softmodem on per subframe basis \n"
#define CONFIG_HLP_256QAM "Use the 256 QAM mcs table for PDSCH\n"
#define CONFIG_HLP_STMON "Enable processing timing measurement of lte softmodem on per subframe basis \n"
#define CONFIG_HLP_CHESTFREQ "Set channel estimation type in frequency domain. 0-Linear interpolation (default). 1-PRB based averaging of channel estimates in frequency. \n"
#define CONFIG_HLP_CHESTTIME "Set channel estimation type in time domain. 0-Symbols take estimates of the last preceding DMRS symbol (default). 1-Symbol based averaging of channel estimates in time. \n"
#define CONFIG_HLP_IMSCOPE "Enable phy scope based on imgui and implot"
#define CONFIG_HLP_IMSCOPE_RECORD "Enable recording scope data to filesystem"
#define CONFIG_HLP_NONSTOP "Go back to frame sync mode after 100 consecutive PBCH failures\n"
//#define CONFIG_HLP_NUMUES "Set the number of UEs for the emulation"
#define CONFIG_HLP_MSLOTS "Skip the missed slots/subframes \n"
#define CONFIG_HLP_ULMCS "Set the maximum uplink MCS\n"
#define CONFIG_HLP_NONSTOP "Go back to frame sync mode after 100 consecutive PBCH failures\n"
#define CONFIG_HLP_UE "Set the lte softmodem as a UE\n"
#define CONFIG_HLP_TQFS \
"Apply three-quarter of sampling frequency, (example 23.04 Msps for LTE 20MHz) to reduce the data rate on USB/PCIe transfers " \
"(only valid for some bandwidths)\n"
#define CONFIG_HLP_TPORT "tracer port\n"
#define CONFIG_HLP_NOTWAIT "don't wait for tracer, start immediately\n"
#define CONFIG_HLP_TNOFORK "to ease debugging with gdb\n"
#define CONFIG_HLP_NOTWAIT "don't wait for tracer, start immediately\n"
#define CONFIG_HLP_NUMEROLOGY "adding numerology for 5G\n"
#define CONFIG_HLP_BAND "band index\n"
@@ -128,8 +116,7 @@ extern "C"
#define BAND softmodem_params.band
#define CLOCK_SOURCE softmodem_params.clock_source
#define TIMING_SOURCE softmodem_params.timing_source
#define TUNE_OFFSET softmodem_params.tune_offset
#define SEND_DMRSSYNC softmodem_params.send_dmrs_sync
#define TUNE_OFFSET softmodem_params.tune_offset
#define CHEST_FREQ softmodem_params.chest_freq
#define CHEST_TIME softmodem_params.chest_time
#define NFAPI softmodem_params.nfapi
@@ -140,8 +127,6 @@ extern "C"
#define SYNC_REF softmodem_params.sync_ref
#define DEFAULT_PDU_ID softmodem_params.default_pdu_session_id
#define DEFAULT_RFCONFIG_FILE "/usr/local/etc/syriq/ue.band7.tm1.PRB100.NR40.dat";
extern int usrp_tx_thread;
// clang-format off
#define CMDLINE_PARAMS_DESC { \
@@ -358,6 +343,8 @@ struct timespec timespec_sub(struct timespec lhs, struct timespec rhs);
extern uint8_t nfapi_mode;
extern char *parallel_config;
extern char *worker_config;
extern double cpuf;
#ifdef __cplusplus
}
#endif