diff --git a/cmake_targets/autotests/README.txt b/cmake_targets/autotests/README.txt index 2e1f3ebad4..8549f54221 100644 --- a/cmake_targets/autotests/README.txt +++ b/cmake_targets/autotests/README.txt @@ -97,27 +97,45 @@ Obj.# Case# Test# Description 01 51 06 mbmssim (TBD) -01 55 lte-softmodem tests with USRP B210 RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX, 1TX/2RX, 2TX/1RX 2TX/2RX +01 55 lte-softmodem tests with USRP B210 RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX, 2TX/2RX 01 55 00 Band 7 FDD 5MHz UL Throughput for 60 sec for 1TX/1RX -01 55 01 Band 7 FDD 10MHz UL Throughput for 60 sec for 1TX/RX -01 55 02 Band 7 FDD 20MHz UL Throughput for 60 sec for 1TX/RX -01 55 03 Band 7 FDD 5MHz DL Throughput for 60 sec for 1TX/RX -01 55 04 Band 7 FDD 10MHz DL Throughput for 60 sec for 1TX/RX -01 55 05 Band 7 FDD 20MHz DL Throughput for 60 sec for 1TX/RX - +01 55 01 Band 7 FDD 10MHz UL Throughput for 60 sec for 1TX/1RX +01 55 02 Band 7 FDD 20MHz UL Throughput for 60 sec for 1TX/1RX +01 55 03 Band 7 FDD 5MHz DL Throughput for 60 sec for 1TX/1RX +01 55 04 Band 7 FDD 10MHz DL Throughput for 60 sec for 1TX/1RX +01 55 05 Band 7 FDD 20MHz DL Throughput for 60 sec for 1TX/1RX +01 55 06 Band 7 FDD 5MHz UL Throughput for 60 sec for 2TX/2RX +01 55 07 Band 7 FDD 10MHz UL Throughput for 60 sec for 2TX/2RX +01 55 08 Band 7 FDD 20MHz UL Throughput for 60 sec for 2TX/2RX +01 55 09 Band 7 FDD 5MHz DL Throughput for 60 sec for 2TX/2RX +01 55 10 Band 7 FDD 10MHz DL Throughput for 60 sec for 2TX/2RX +01 55 11 Band 7 FDD 20MHz DL Throughput for 60 sec for 2TX/2RX 01 56 lte-softmodem tests with USRP B210 RF as eNB and OAI EPC (eNB and EPC are on same machines) w/ Bandrich COTS UE 01 57 lte-softmodem tests with USRP B210 RF as eNB and OAI EPC (eNB and EPC are on different machines) w/ Bandrich COTS UE -01 58 lte-softmodem tests with USRP X310 RF as eNB and ALU EPC w/ Bandrich COTS UE for `TX/1RX, 1TX/2RX, 2TX/1RX 2TX/2RX +01 58 lte-softmodem tests with USRP X310 RF as eNB and ALU EPC w/ Bandrich COTS UE for `TX/1RX, 2TX/2RX +01 58 00 Band 7 FDD 5MHz UL Throughput for 60 sec for 1TX/1RX +01 58 01 Band 7 FDD 10MHz UL Throughput for 60 sec for 1TX/1RX +01 58 02 Band 7 FDD 20MHz UL Throughput for 60 sec for 1TX/1RX +01 58 03 Band 7 FDD 5MHz DL Throughput for 60 sec for 1TX/1RX +01 58 04 Band 7 FDD 10MHz DL Throughput for 60 sec for 1TX/1RX +01 58 05 Band 7 FDD 20MHz DL Throughput for 60 sec for 1TX/1RX 01 59 lte-softmodem tests with USRP X310 RF as eNB and OAI EPC (eNB and EPC are on same machines) w/ Bandrich COTS UE 01 61 lte-softmodem tests with USRP X310 RF as eNB and OAI EPC (eNB and EPC are on different machines) w/ Bandrich COTS UE -01 61 lte-softmodem tests with EXMIMO RF as eNB and ALU EPC w/ Bandrich COTS UE +01 61 lte-softmodem tests with EXMIMO RF as eNB and ALU EPC w/ Bandrich COTS UE for `TX/1RX, 2TX/2RX +01 61 00 Band 7 FDD 5MHz UL Throughput for 60 sec for 1TX/1RX +01 61 01 Band 7 FDD 10MHz UL Throughput for 60 sec for 1TX/1RX +01 61 02 Band 7 FDD 20MHz UL Throughput for 60 sec for 1TX/1RX +01 61 03 Band 7 FDD 5MHz DL Throughput for 60 sec for 1TX/1RX +01 61 04 Band 7 FDD 10MHz DL Throughput for 60 sec for 1TX/1RX +01 61 05 Band 7 FDD 20MHz DL Throughput for 60 sec for 1TX/1RX + 01 62 lte-softmodem tests with EXMIMO RF as eNB and OAI EPC (eNB and EPC are on same machines) w/ Bandrich COTS UE 01 63 lte-softmodem tests with EXMIMO RF as eNB and OAI EPC (eNB and EPC are on different machines) w/ Bandrich COTS UE diff --git a/cmake_targets/autotests/run_exec_lte-softmodem_tests.py b/cmake_targets/autotests/run_exec_lte-softmodem_tests.py index be4082bee5..6f14cf63f3 100644 --- a/cmake_targets/autotests/run_exec_lte-softmodem_tests.py +++ b/cmake_targets/autotests/run_exec_lte-softmodem_tests.py @@ -81,8 +81,8 @@ def write_file(filename, string, mode="w"): #$5 minimum duration of throughput #The throughput values found in file must be higher than values from from 2,3,4,5 #The function returns True if throughput conditions are saisfied else it returns fails - def tput_test(filename, min_tput, max_tput, average, min_duration): + if os.path.exists(filename): with open (filename, "r") as myfile: data=myfile.read() @@ -98,13 +98,13 @@ def tput_test(filename, min_tput, max_tput, average, min_duration): min_list = 0 max_list = 0 average_list=0 - + tput_string=' ( '+ "min=%0.2f" % min_list + ' Mbps / ' + "max=%0.2f" % max_list + ' Mbps / ' + "avg=%0.2f" % average_list + ' Mbps / ' + "dur=%0.2f" % duration + ' s) ' if (min_list >= min_tput and max_list >= max_tput and average_list >= average and duration >= min_duration): - return True + return True , tput_string else: - return False + return False , tput_string else: - return False + return False , tput_string def try_convert_to_float(string, fail=None): @@ -115,6 +115,7 @@ def try_convert_to_float(string, fail=None): def tput_test_search_expr (search_expr, logfile_traffic): result=0 + tput_string='' if search_expr !='': if search_expr.find('throughput_test')!= -1 : p= re.compile('min\s*=\s*(\d*.\d*)\s*Mbits/sec') @@ -151,12 +152,11 @@ def tput_test_search_expr (search_expr, logfile_traffic): duration = try_convert_to_float(duration) if (min_tput != None and max_tput != None and avg_tput != None and duration != None ): - result = tput_test(logfile_traffic, min_tput, max_tput, avg_tput, duration) + result, tput_string = tput_test(logfile_traffic, min_tput, max_tput, avg_tput, duration) else: result=1 - return result - + return result, tput_string def sftp_module (username, password, hostname, ports, paramList,logfile): @@ -772,17 +772,23 @@ def handle_testcaseclass_softmodem (testcase, oldprogramList, logdirOAI5GRepo , ssh.get_all(logdir_UE , logdir_local + '/cmake_targets/autotests/log/'+ testcasename) #Currently we only perform throughput tests - result = tput_test_search_expr(eNB_search_expr_true, logfile_local_traffic_eNB_out) + tput_run_string='' + result, tput_string = tput_test_search_expr(eNB_search_expr_true, logfile_local_traffic_eNB_out) + tput_run_string = tput_run_string + tput_string run_result=run_result&result - result = tput_test_search_expr(EPC_search_expr_true, logfile_local_traffic_EPC_out) + result, tput_string = tput_test_search_expr(EPC_search_expr_true, logfile_local_traffic_EPC_out) run_result=run_result&result - result = tput_test_search_expr(UE_search_expr_true, logfile_local_traffic_UE_out) + tput_run_string = tput_run_string + tput_string + result, tput_string = tput_test_search_expr(UE_search_expr_true, logfile_local_traffic_UE_out) run_result=run_result&result + tput_run_string = tput_run_string + tput_string if run_result == 1: run_result_string = ' RUN_'+str(run) + ' = PASS' else: run_result_string = ' RUN_'+str(run) + ' = FAIL' + + run_result_string = run_result_string + tput_run_string test_result=test_result & run_result test_result_string=test_result_string + run_result_string @@ -801,7 +807,7 @@ def handle_testcaseclass_softmodem (testcase, oldprogramList, logdirOAI5GRepo , result='FAIL' else: result = 'PASS' - xml="\n" + xml="\n \n" write_file(xmlFile, xml, mode="w") diff --git a/cmake_targets/autotests/test_case_list.xml b/cmake_targets/autotests/test_case_list.xml index 2f76a769d3..9f2091053e 100644 --- a/cmake_targets/autotests/test_case_list.xml +++ b/cmake_targets/autotests/test_case_list.xml @@ -8,7 +8,7 @@ feature-17-test_framework oaisim* oaisim_nos1* lte-softmodem* lte-softmodem-nos1* mme_gw* run_epc* run_hss* iperf* hss hss_sim configure_cots_bandrich_ue* wvdial* run_exec_autotests* iperf /opt/ltebox/tools/stop_ltebox - 1800 + 36000 calisson stevens mozart nano amerique compilation @@ -1208,6 +1208,7 @@ True sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + throughput_test min=4.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec duration=60.0s /tmp BUILD/EPC/epc.local.enb.conf.in MCC \"208\" @@ -1228,7 +1229,6 @@ sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 120 -B 192.172.0.1 - throughput_test min=4.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec duration=60.0s True USRP.ALU_EPC.Bandrich.5MHz.FDD.Band_7.DL.1TX.1RX @@ -1286,6 +1286,7 @@ True sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec duration=60.0s /tmp BUILD/EPC/epc.local.enb.conf.in MCC \"208\" @@ -1306,7 +1307,6 @@ sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 120 -B 192.172.0.1 - throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec duration=60.0s True USRP.ALU_EPC.Bandrich.10MHz.FDD.Band_7.DL.1TX.1RX @@ -1364,6 +1364,7 @@ True sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + throughput_test min=15.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec duration=60.0s /tmp BUILD/EPC/epc.local.enb.conf.in MCC \"208\" @@ -1384,13 +1385,1366 @@ sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 120 -B 192.172.0.1 - throughput_test min=15.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec duration=60.0s True USRP.ALU_EPC.Bandrich.20MHz.FDD.Band_7.DL.1TX.1RX 3 + + + lte-softmodem + + calisson + stevens + amerique + 180 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 25 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 120 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 2 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf + + + + + True + + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 120 -B 192.172.0.2 + + + + True + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + + /tmp + BUILD/EPC/epc.local.enb.conf.in MCC \"208\" + BUILD/EPC/epc.local.enb.conf.in MNC \"92\" + BUILD/EPC/epc.local.enb.conf.in TAC \"1\" + BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + SCRIPTS/build_epc + -c -l + SCRIPTS/build_hss + -c -l + + + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.1 + + throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec duration=60.0s + + True + USRP.ALU_EPC.Bandrich.5MHz.FDD.Band_7.UL.2TX.2RX + 3 + + + + + lte-softmodem + + calisson + stevens + amerique + 180 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 120 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 2 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf + + + + + True + + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 120 -B 192.172.0.2 + + + + True + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + + /tmp + BUILD/EPC/epc.local.enb.conf.in MCC \"208\" + BUILD/EPC/epc.local.enb.conf.in MNC \"92\" + BUILD/EPC/epc.local.enb.conf.in TAC \"1\" + BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + SCRIPTS/build_epc + -c -l + SCRIPTS/build_hss + -c -l + + + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.1 + + throughput_test min=2.0Mbits/sec max=2.0Mbits/sec average=2.0Mbits/sec duration=60.0s + + True + USRP.ALU_EPC.Bandrich.10MHz.FDD.Band_7.UL.2TX.2RX + 3 + + + + lte-softmodem + + calisson + stevens + amerique + 180 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 100 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 120 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 2 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf + + + + + True + + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 120 -B 192.172.0.2 + + + + True + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + + /tmp + BUILD/EPC/epc.local.enb.conf.in MCC \"208\" + BUILD/EPC/epc.local.enb.conf.in MNC \"92\" + BUILD/EPC/epc.local.enb.conf.in TAC \"1\" + BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + SCRIPTS/build_epc + -c -l + SCRIPTS/build_hss + -c -l + + + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.1 + + throughput_test min=4.0Mbits/sec max=4.0Mbits/sec average=4.0Mbits/sec duration=60.0s + + True + USRP.ALU_EPC.Bandrich.20MHz.FDD.Band_7.UL.2TX.2RX + 3 + + + + lte-softmodem + + calisson + stevens + amerique + 180 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 25 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 120 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 2 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf + + + + + True + + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.2 + + + + True + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + throughput_test min=4.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec duration=60.0s + + /tmp + BUILD/EPC/epc.local.enb.conf.in MCC \"208\" + BUILD/EPC/epc.local.enb.conf.in MNC \"92\" + BUILD/EPC/epc.local.enb.conf.in TAC \"1\" + BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + SCRIPTS/build_epc + -c -l + SCRIPTS/build_hss + -c -l + + + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 120 -B 192.172.0.1 + + + True + USRP.ALU_EPC.Bandrich.5MHz.FDD.Band_7.DL.2TX.2RX + 3 + + + + lte-softmodem + + calisson + stevens + amerique + 180 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 120 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 2 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf + + + + + True + + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.2 + + + + True + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec duration=60.0s + + /tmp + BUILD/EPC/epc.local.enb.conf.in MCC \"208\" + BUILD/EPC/epc.local.enb.conf.in MNC \"92\" + BUILD/EPC/epc.local.enb.conf.in TAC \"1\" + BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + SCRIPTS/build_epc + -c -l + SCRIPTS/build_hss + -c -l + + + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 120 -B 192.172.0.1 + + + True + USRP.ALU_EPC.Bandrich.10MHz.FDD.Band_7.DL.2TX.2RX + 3 + + + + lte-softmodem + + calisson + stevens + amerique + 180 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 100 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 120 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 2 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 2 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf + + + + + True + + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.2 + + + + True + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + throughput_test min=15.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec duration=60.0s + + /tmp + BUILD/EPC/epc.local.enb.conf.in MCC \"208\" + BUILD/EPC/epc.local.enb.conf.in MNC \"92\" + BUILD/EPC/epc.local.enb.conf.in TAC \"1\" + BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + SCRIPTS/build_epc + -c -l + SCRIPTS/build_hss + -c -l + + + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 120 -B 192.172.0.1 + + + True + USRP.ALU_EPC.Bandrich.20MHz.FDD.Band_7.DL.2TX.2RX + 3 + + + + + lte-softmodem + + mozart + stevens + amerique + 180 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf N_RB_DL 25 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf nb_antennas_tx 1 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf + + + + + True + + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 120 -B 192.172.0.2 + + + + True + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + + /tmp + BUILD/EPC/epc.local.enb.conf.in MCC \"208\" + BUILD/EPC/epc.local.enb.conf.in MNC \"92\" + BUILD/EPC/epc.local.enb.conf.in TAC \"1\" + BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + SCRIPTS/build_epc + -c -l + SCRIPTS/build_hss + -c -l + + + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.1 + + throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec duration=60.0s + + True + USRPx310.ALU_EPC.Bandrich.5MHz.FDD.Band_7.UL.1TX.1RX + 3 + + + + + lte-softmodem + + mozart + stevens + amerique + 180 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.conf N_RB_DL 50 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.conf nb_antennas_tx 1 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.conf + + + + + True + + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 120 -B 192.172.0.2 + + + + True + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + + /tmp + BUILD/EPC/epc.local.enb.conf.in MCC \"208\" + BUILD/EPC/epc.local.enb.conf.in MNC \"92\" + BUILD/EPC/epc.local.enb.conf.in TAC \"1\" + BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + SCRIPTS/build_epc + -c -l + SCRIPTS/build_hss + -c -l + + + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.1 + + throughput_test min=2.0Mbits/sec max=2.0Mbits/sec average=2.0Mbits/sec duration=60.0s + + True + USRPx310.ALU_EPC.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX + 3 + + + + lte-softmodem + + calisson + stevens + amerique + 180 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf N_RB_DL 100 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf nb_antennas_tx 1 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf + + + + + True + + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 120 -B 192.172.0.2 + + + + True + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + + /tmp + BUILD/EPC/epc.local.enb.conf.in MCC \"208\" + BUILD/EPC/epc.local.enb.conf.in MNC \"92\" + BUILD/EPC/epc.local.enb.conf.in TAC \"1\" + BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + SCRIPTS/build_epc + -c -l + SCRIPTS/build_hss + -c -l + + + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.1 + + throughput_test min=4.0Mbits/sec max=4.0Mbits/sec average=4.0Mbits/sec duration=60.0s + + True + USRPx310.ALU_EPC.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX + 3 + + + + lte-softmodem + + calisson + stevens + amerique + 180 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf N_RB_DL 25 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf nb_antennas_tx 1 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf + + + + + True + + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.2 + + + + True + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + throughput_test min=4.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec duration=60.0s + + /tmp + BUILD/EPC/epc.local.enb.conf.in MCC \"208\" + BUILD/EPC/epc.local.enb.conf.in MNC \"92\" + BUILD/EPC/epc.local.enb.conf.in TAC \"1\" + BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + SCRIPTS/build_epc + -c -l + SCRIPTS/build_hss + -c -l + + + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 120 -B 192.172.0.1 + + + True + USRPx310.ALU_EPC.Bandrich.5MHz.FDD.Band_7.DL.1TX.1RX + 3 + + + + lte-softmodem + + calisson + stevens + amerique + 180 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.conf N_RB_DL 50 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.conf nb_antennas_tx 1 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.conf + + + + + True + + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.2 + + + + True + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec duration=60.0s + + /tmp + BUILD/EPC/epc.local.enb.conf.in MCC \"208\" + BUILD/EPC/epc.local.enb.conf.in MNC \"92\" + BUILD/EPC/epc.local.enb.conf.in TAC \"1\" + BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + SCRIPTS/build_epc + -c -l + SCRIPTS/build_hss + -c -l + + + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 120 -B 192.172.0.1 + + + True + USRPx310.ALU_EPC.Bandrich.10MHz.FDD.Band_7.DL.1TX.1RX + 3 + + + + lte-softmodem + + calisson + stevens + amerique + 180 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf N_RB_DL 100 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf nb_antennas_tx 1 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.remote.conf + + + + + True + + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.2 + + + + True + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + throughput_test min=15.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec duration=60.0s + + /tmp + BUILD/EPC/epc.local.enb.conf.in MCC \"208\" + BUILD/EPC/epc.local.enb.conf.in MNC \"92\" + BUILD/EPC/epc.local.enb.conf.in TAC \"1\" + BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + SCRIPTS/build_epc + -c -l + SCRIPTS/build_hss + -c -l + + + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 120 -B 192.172.0.1 + + + True + USRP.ALU_EPC.Bandrich.20MHz.FDD.Band_7.DL.1TX.1RX + 3 + + + + + + + lte-softmodem + + calisson + stevens + amerique + 180 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 25 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_tx 1 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w EXMIMO -x -c + sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf + + + + + True + + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 120 -B 192.172.0.2 + + + + True + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + + /tmp + BUILD/EPC/epc.local.enb.conf.in MCC \"208\" + BUILD/EPC/epc.local.enb.conf.in MNC \"92\" + BUILD/EPC/epc.local.enb.conf.in TAC \"1\" + BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + SCRIPTS/build_epc + -c -l + SCRIPTS/build_hss + -c -l + + + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.1 + + throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec duration=60.0s + + True + EXMIMO.ALU_EPC.Bandrich.5MHz.FDD.Band_7.UL.1TX.1RX + 3 + + + + + lte-softmodem + + calisson + stevens + amerique + 180 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 50 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_tx 1 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w EXMIMO -x -c + sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf + + + + + True + + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 120 -B 192.172.0.2 + + + + True + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + + /tmp + BUILD/EPC/epc.local.enb.conf.in MCC \"208\" + BUILD/EPC/epc.local.enb.conf.in MNC \"92\" + BUILD/EPC/epc.local.enb.conf.in TAC \"1\" + BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + SCRIPTS/build_epc + -c -l + SCRIPTS/build_hss + -c -l + + + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.1 + + throughput_test min=2.0Mbits/sec max=2.0Mbits/sec average=2.0Mbits/sec duration=60.0s + + True + EXMIMO.ALU_EPC.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX + 3 + + + + lte-softmodem + + calisson + stevens + amerique + 180 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 100 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_tx 1 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w EXMIMO -x -c + sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf + + + + + True + + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 120 -B 192.172.0.2 + + + + True + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + + /tmp + BUILD/EPC/epc.local.enb.conf.in MCC \"208\" + BUILD/EPC/epc.local.enb.conf.in MNC \"92\" + BUILD/EPC/epc.local.enb.conf.in TAC \"1\" + BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + SCRIPTS/build_epc + -c -l + SCRIPTS/build_hss + -c -l + + + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.1 + + throughput_test min=4.0Mbits/sec max=4.0Mbits/sec average=4.0Mbits/sec duration=60.0s + + True + EXMIMO.ALU_EPC.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX + 3 + + + + lte-softmodem + + calisson + stevens + amerique + 180 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 25 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_tx 1 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf + + + + + True + + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.2 + + + + True + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + throughput_test min=4.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec duration=60.0s + + /tmp + BUILD/EPC/epc.local.enb.conf.in MCC \"208\" + BUILD/EPC/epc.local.enb.conf.in MNC \"92\" + BUILD/EPC/epc.local.enb.conf.in TAC \"1\" + BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + SCRIPTS/build_epc + -c -l + SCRIPTS/build_hss + -c -l + + + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 120 -B 192.172.0.1 + + + True + EXMIMO.ALU_EPC.Bandrich.5MHz.FDD.Band_7.DL.1TX.1RX + 3 + + + + lte-softmodem + + calisson + stevens + amerique + 180 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 50 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_tx 1 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w EXMIMO -x -c + sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf + + + + + True + + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.2 + + + + True + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec duration=60.0s + + /tmp + BUILD/EPC/epc.local.enb.conf.in MCC \"208\" + BUILD/EPC/epc.local.enb.conf.in MNC \"92\" + BUILD/EPC/epc.local.enb.conf.in TAC \"1\" + BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + SCRIPTS/build_epc + -c -l + SCRIPTS/build_hss + -c -l + + + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 120 -B 192.172.0.1 + + + True + EXMIMO.ALU_EPC.Bandrich.10MHz.FDD.Band_7.DL.1TX.1RX + 3 + + + + lte-softmodem + + calisson + stevens + amerique + 180 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 100 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_tx 1 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w EXMIMO -x -c + sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf + + + + + True + + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\" + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -x -c + + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.2 + + + + True + sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + throughput_test min=15.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec duration=60.0s + + /tmp + BUILD/EPC/epc.local.enb.conf.in MCC \"208\" + BUILD/EPC/epc.local.enb.conf.in MNC \"92\" + BUILD/EPC/epc.local.enb.conf.in TAC \"1\" + BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + SCRIPTS/build_epc + -c -l + SCRIPTS/build_hss + -c -l + + + + /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000 + + /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 + + sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 120 -B 192.172.0.1 + + + True + EXMIMO.ALU_EPC.Bandrich.20MHz.FDD.Band_7.DL.1TX.1RX + 3 + + + + lte-softmodem