diff --git a/ci-scripts/Jenkinsfile-GitLab-Container b/ci-scripts/Jenkinsfile-GitLab-Container index f4b99e7f92..a6621afe25 100644 --- a/ci-scripts/Jenkinsfile-GitLab-Container +++ b/ci-scripts/Jenkinsfile-GitLab-Container @@ -220,6 +220,21 @@ pipeline { } } } + stage ("Images Push to Registries") { + when { expression {"PUSH".equals(env.gitlabActionType)} } + steps { + script { + triggerSlaveJob ('RAN-DockerHub-Push', 'Push-to-Docker-Hub') + } + post { + failure { + script { + currentBuild.result = 'FAILURE' + } + } + } + } + } } post { always { diff --git a/ci-scripts/Jenkinsfile-gitlab b/ci-scripts/Jenkinsfile-gitlab index 6b53230c09..a0284edb71 100644 --- a/ci-scripts/Jenkinsfile-gitlab +++ b/ci-scripts/Jenkinsfile-gitlab @@ -503,6 +503,29 @@ pipeline { } } } + stage ("Test F1 - FDD - Band 7 - B210") { + when { + expression {doFullTestsuite} + } + steps { + script { + sh "sleep 60" + triggerSlaveJob ('eNB-CI-F1-FDD-Band7-B210', 'Test-F1-FDD-Band7') + } + } + post { + always { + script { + finalizeSlaveJob('eNB-CI-F1-FDD-Band7-B210') + } + } + failure { + script { + currentBuild.result = 'FAILURE' + } + } + } + } stage ("Test IF4p5 - TDD - Band 40 - B210") { when { expression {doFullTestsuite} diff --git a/ci-scripts/Jenkinsfile-push-registry b/ci-scripts/Jenkinsfile-push-registry new file mode 100644 index 0000000000..91d6136e0a --- /dev/null +++ b/ci-scripts/Jenkinsfile-push-registry @@ -0,0 +1,86 @@ +#!/bin/groovy +/* + * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more + * contributor license agreements. See the NOTICE file distributed with + * this work for additional information regarding copyright ownership. + * The OpenAirInterface Software Alliance licenses this file to You under + * the OAI Public License, Version 1.1 (the "License"); you may not use this file + * except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.openairinterface.org/?page_id=698 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + *------------------------------------------------------------------------------- + * For more information about the OpenAirInterface (OAI) Software Alliance: + * contact@openairinterface.org + */ + +// Location of the python executor node shall be in the same subnet as the others servers +def nodeExecutor = params.nodeExecutor + +// Name of the phone resource +def ciServerResource = params.serverResource + +pipeline { + agent { + label nodeExecutor + } + options { + disableConcurrentBuilds() + ansiColor('xterm') + lock (ciServerResource) + } + stages { + stage ("Verify Parameters") { + steps { + script { + echo '\u2705 \u001B[32mVerify Parameters\u001B[0m' + def allParametersPresent = true + + // It is already to late to check it + if (params.nodeExecutor != null) { + echo "Docker Push executor node : ${nodeExecutor}" + } + if (params.serverResource == null) { + allParametersPresent = false + } + } + } + } + stage ("Push to DockerHub") { + steps { + script { + WEEK_TAG = sh returnStdout: true, script: 'date +"%Y.w%U"' + WEEK_TAG = WEEK_TAG.trim() + + withCredentials([ + [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.DH_Credentials}", usernameVariable: 'DH_Username', passwordVariable: 'DH_Password'] + ]) { + def listOfImages = ["oai-enb", "oai-gnb", "oai-lte-ue", "oai-nr-ue"] + sh "docker login -u ${DH_Username} -p ${DH_Password} > /dev/null 2>&1" + listOfImages.eachWithIndex { item, iindex -> + sh "docker image tag ${item}:develop ${DH_Username}/${item}:develop" + sh "docker image tag ${item}:develop ${DH_Username}/${item}:${WEEK_TAG}" + sh "docker push --quiet ${DH_Username}/${item}:${WEEK_TAG}" + sh "docker push --quiet ${DH_Username}/${item}:develop" + sh "docker rmi ${DH_Username}/${item}:${WEEK_TAG} ${DH_Username}/${item}:develop" + } + sh "docker logout > /dev/null 2>&1" + } + } + } + } + } + post { + always { + script { + echo "End of Registry Push" + } + } + } +} diff --git a/ci-scripts/Jenkinsfile-tmp-multi-enb-nsa b/ci-scripts/Jenkinsfile-tmp-multi-enb-nsa index 95aa4046d7..3243d1645d 100644 --- a/ci-scripts/Jenkinsfile-tmp-multi-enb-nsa +++ b/ci-scripts/Jenkinsfile-tmp-multi-enb-nsa @@ -265,6 +265,21 @@ pipeline { if(fileExists("enb.log.${env.BUILD_ID}.zip")) { archiveArtifacts "enb.log.${env.BUILD_ID}.zip" } + } + } + } + stage('Log Collection (CN)') { + steps { + withCredentials([ + [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password'] + ]) { + echo '\u2705 \u001B[32mLog Transfer (CN)\u001B[0m' + sh "sshpass -p \'${EPC_Password}\' scp -o 'StrictHostKeyChecking no' -o 'ConnectTimeout 10' ${EPC_Username}@${params.EPC_IPAddress}:${EPC_SourceCodePath}/logs/oai-cn5g.log.zip ./oai-cn5g.log.${env.BUILD_ID}.zip || true" + } + script { + if(fileExists("oai-cn5g.log.${env.BUILD_ID}.zip")) { + archiveArtifacts "oai-cn5g.log.${env.BUILD_ID}.zip" + } if(fileExists("ci-scripts/test_results.html")) { sh "mv ci-scripts/test_results.html test_results-${JOB_NAME}.html" sh "sed -i -e 's#TEMPLATE_JOB_NAME#${JOB_NAME}#' -e 's@build #TEMPLATE_BUILD_ID@build #${BUILD_ID}@' -e 's#Build-ID: TEMPLATE_BUILD_ID#Build-ID: ${BUILD_ID}#' -e 's#TEMPLATE_STAGE_NAME#${testStageName}#' test_results-${JOB_NAME}.html" diff --git a/ci-scripts/Jenkinsfile-trig-nsa b/ci-scripts/Jenkinsfile-trig-nsa index 2dcaf1a04f..f4db9fd19b 100644 --- a/ci-scripts/Jenkinsfile-trig-nsa +++ b/ci-scripts/Jenkinsfile-trig-nsa @@ -47,30 +47,30 @@ pipeline { COMMIT_ID=sh returnStdout: true, script: """curl --silent "https://gitlab.eurecom.fr/api/v4/projects/oai%2Fopenairinterface5g/merge_requests/${MR}" | jq ".sha" || true """ COMMIT_ID=COMMIT_ID.trim() echo "Testing NSA on : ${MR} ${SRC_BRANCH} ${COMMIT_ID}" - //calling NSA sub job - build job: "RAN-NSA-Mini-Module", wait : true, propagate : false, parameters: [ + //calling NSA B200 + build job: "RAN-NSA-B200-Module-LTEBOX", wait : true, propagate : false, parameters: [ string(name: 'eNB_MR', value: String.valueOf(MR)), string(name: 'eNB_Branch', value: String.valueOf(SRC_BRANCH)), string(name: 'eNB_CommitID', value: String.valueOf(COMMIT_ID)), string(name: 'eNB_TargetBranch', value: String.valueOf(TARGET_BRANCH)), booleanParam(name: 'eNB_AllowMergeRequestProcess', value: Boolean.valueOf(ALLOW_MERGE)) ] - //calling NSA long sub job -// build job: "RAN-NSA-Mini-Module-Long", wait : true, propagate : false, parameters: [ -// string(name: 'eNB_MR', value: String.valueOf(MR)), -// string(name: 'eNB_Branch', value: String.valueOf(SRC_BRANCH)), -// string(name: 'eNB_CommitID', value: String.valueOf(COMMIT_ID)), -// string(name: 'eNB_TargetBranch', value: String.valueOf(TARGET_BRANCH)), -// booleanParam(name: 'eNB_AllowMergeRequestProcess', value: Boolean.valueOf(ALLOW_MERGE)) -// ] - //calling NSA attach/detach job -// build job: "RAN-NSA-Mini-Module-Attach-Detach", wait : true, propagate : false, parameters: [ -// string(name: 'eNB_MR', value: String.valueOf(MR)), -// string(name: 'eNB_Branch', value: String.valueOf(SRC_BRANCH)), -// string(name: 'eNB_CommitID', value: String.valueOf(COMMIT_ID)), -// string(name: 'eNB_TargetBranch', value: String.valueOf(TARGET_BRANCH)), -// booleanParam(name: 'eNB_AllowMergeRequestProcess', value: Boolean.valueOf(ALLOW_MERGE)) -// ] + //calling NSA 2x2 + build job: "RAN-NSA-2x2-Module-OAIEPC", wait : true, propagate : false, parameters: [ + string(name: 'eNB_MR', value: String.valueOf(MR)), + string(name: 'eNB_Branch', value: String.valueOf(SRC_BRANCH)), + string(name: 'eNB_CommitID', value: String.valueOf(COMMIT_ID)), + string(name: 'eNB_TargetBranch', value: String.valueOf(TARGET_BRANCH)), + booleanParam(name: 'eNB_AllowMergeRequestProcess', value: Boolean.valueOf(ALLOW_MERGE)) + ] + //calling LTE 2x2 + build job: "RAN-LTE-2x2-Module-OAIEPC", wait : true, propagate : false, parameters: [ + string(name: 'eNB_MR', value: String.valueOf(MR)), + string(name: 'eNB_Branch', value: String.valueOf(SRC_BRANCH)), + string(name: 'eNB_CommitID', value: String.valueOf(COMMIT_ID)), + string(name: 'eNB_TargetBranch', value: String.valueOf(TARGET_BRANCH)), + booleanParam(name: 'eNB_AllowMergeRequestProcess', value: Boolean.valueOf(ALLOW_MERGE)) + ] } } diff --git a/ci-scripts/ci_ueinfra.yaml b/ci-scripts/ci_ueinfra.yaml index 619e8fba15..0957a1e465 100644 --- a/ci-scripts/ci_ueinfra.yaml +++ b/ci-scripts/ci_ueinfra.yaml @@ -4,7 +4,9 @@ idefix: Kind : quectel Process : Name : quectel-CM - Cmd : /home/oaicicd/quectel-CM/quectel-CM -s oai.ipv4 -4 + Cmd : /home/oaicicd/quectel-CM/quectel-CM -4 -s + Apn : + ltebox : oai.ipv4 WakeupScript : ci_ctl_qtel.py /dev/ttyUSB2 wup DetachScript : ci_ctl_qtel.py /dev/ttyUSB2 detach LogStore : /media/usb-drive/ci_qlogs @@ -20,16 +22,22 @@ nrmodule2_quectel: Kind : quectel Process : Name : quectel-CM - Cmd : /home/nrmodule2/quectel-CM/quectel-CM -s oai.ipv4 -4 + Cmd : /home/nrmodule2/quectel-CM/quectel-CM -4 -s + Apn : + OAICN5G : oai + OAI-Rel14-Docker : oai.ipv4 WakeupScript : ci_ctl_qtel.py /dev/ttyUSB7 wup DetachScript : ci_ctl_qtel.py /dev/ttyUSB7 detach LogStore : /media/ci_qlogs - PLMN : 20899 + PLMN : 20897 UENetwork : wwan1 HostIPAddress : 192.168.18.189 HostUsername : nrmodule2 HostPassword : linux HostSourceCodePath : none + StartCommands : + - sudo -S ip link set dev wwan1 mtu 1500 + MTU : 1500 dummy: ID: '' State : '' diff --git a/ci-scripts/cls_module_ue.py b/ci-scripts/cls_module_ue.py index 96d4e0310e..74ae9c207e 100644 --- a/ci-scripts/cls_module_ue.py +++ b/ci-scripts/cls_module_ue.py @@ -61,7 +61,7 @@ class Module_UE: #this method checks if the specified Process is running on the server hosting the module #if not it will be started - def CheckCMProcess(self): + def CheckCMProcess(self,CNType): HOST=self.HostUsername+'@'+self.HostIPAddress COMMAND="ps aux | grep " + self.Process['Name'] + " | grep -v grep " logging.debug(COMMAND) @@ -76,7 +76,7 @@ class Module_UE: logging.debug('Starting ' + self.Process['Name']) mySSH = sshconnection.SSHConnection() mySSH.open(self.HostIPAddress, self.HostUsername, self.HostPassword) - mySSH.command('echo $USER; echo ' + self.HostPassword + ' | nohup sudo -S ' + self.Process['Cmd'] + ' &','\$',5) + mySSH.command('echo $USER; echo ' + self.HostPassword + ' | nohup sudo -S ' + self.Process['Cmd'] + ' ' + self.Process['Apn'][CNType] + ' &','\$',5) mySSH.close() #checking the process time.sleep(5) @@ -131,6 +131,33 @@ class Module_UE: logging.debug('\u001B[1;37;41m Module IP Address Not Found! \u001B[0m') return -1 + def CheckModuleMTU(self): + HOST=self.HostUsername+'@'+self.HostIPAddress + response= [] + tentative = 3 + while (len(response)==0) and (tentative>0): + COMMAND="ip a show dev " + self.UENetwork + " | grep mtu" + logging.debug(COMMAND) + ssh = subprocess.Popen(["ssh", "%s" % HOST, COMMAND],shell=False,stdout=subprocess.PIPE,stderr=subprocess.PIPE) + response = ssh.stdout.readlines() + tentative-=1 + time.sleep(10) + if (tentative==0) and (len(response)==0): + logging.debug('\u001B[1;37;41m Module NIC MTU Not Found! Time expired \u001B[0m') + return -1 + else: #check response + result = re.search('mtu (?P[0-9]+)', response[0].decode("utf-8") ) + if result is not None: + if (result.group('mtu') is not None) and (str(result.group('mtu'))==str(self.MTU)) : + logging.debug('\u001B[1mUE Module NIC MTU is ' + str(self.MTU) + ' as expected\u001B[0m') + return 0 + else: + logging.debug('\u001B[1;37;41m Incorrect Module NIC MTU ' + str(result.group('mtu')) + '! Expected : ' + str(self.MTU) + '\u001B[0m') + return -1 + else: + logging.debug('\u001B[1;37;41m Module NIC MTU Not Found! \u001B[0m') + return -1 + def EnableTrace(self): if self.ue_trace=="yes": mySSH = sshconnection.SSHConnection() diff --git a/ci-scripts/cls_oaicitest.py b/ci-scripts/cls_oaicitest.py index f1ab8c106f..8bda1fa202 100644 --- a/ci-scripts/cls_oaicitest.py +++ b/ci-scripts/cls_oaicitest.py @@ -388,7 +388,7 @@ class OaiCiTest(): #RH Module_UE = cls_module_ue.Module_UE(InfraUE.ci_ue_infra[self.ue_id]) Module_UE.ue_trace=ue_trace - is_module=Module_UE.CheckCMProcess() + is_module=Module_UE.CheckCMProcess(EPC.Type) if is_module: Module_UE.EnableTrace() time.sleep(5) @@ -400,10 +400,20 @@ class OaiCiTest(): if status==0: HTML.CreateHtmlTestRow(Module_UE.UEIPAddress, 'OK', CONST.ALL_PROCESSES_OK) logging.debug('UE IP addresss : '+ Module_UE.UEIPAddress) + #execute additional commands from yaml file after UE attach + SSH = sshconnection.SSHConnection() + SSH.open(Module_UE.HostIPAddress, Module_UE.HostUsername, Module_UE.HostPassword) + for startcommand in Module_UE.StartCommands: + cmd = 'echo ' + Module_UE.HostPassword + ' | ' + startcommand + SSH.command(cmd,'\$',5) + SSH.close() + #check that the MTU is as expected / requested + Module_UE.CheckModuleMTU() else: #status==-1 failed to retrieve IP address HTML.CreateHtmlTestRow('N/A', 'KO', CONST.UE_IP_ADDRESS_ISSUE) self.AutoTerminateUEandeNB(HTML,RAN,COTS_UE,EPC,InfraUE) return + def InitializeOAIUE(self,HTML,RAN,EPC,COTS_UE,InfraUE): @@ -1539,6 +1549,8 @@ class OaiCiTest(): #target address is different depending on EPC type if re.match('OAI-Rel14-Docker', EPC.Type, re.IGNORECASE): Target = EPC.MmeIPAddress + elif re.match('OAICN5G', EPC.Type, re.IGNORECASE): + Target = '8.8.8.8' else: Target = EPC.IPAddress #ping from module NIC rather than IP address to make sure round trip is over the air @@ -1986,7 +1998,7 @@ class OaiCiTest(): if type==0: result = re.search('(?P[0-9\.]+ [KMG]bits\/sec) +(?P[0-9\.]+ ms) +(?P[0-9]+)/ +(?P[0-9]+)', str(line)) else: - result = re.search('^\[ \d\].+ +(?P[0-9\.]+ [KMG]bits\/sec) +(?P[0-9\.]+ ms) +(?P[0-9]+)\/(?P[0-9]+)', str(line)) + result = re.search('^\[\s+\d\].+ (?P[0-9\.]+ [KMG]bits\/sec) +(?P[0-9\.]+ ms) +(?P[0-9]+)\/\s*(?P[0-9]+)', str(line)) if result is not None: bitrate = result.group('bitrate') @@ -2230,85 +2242,157 @@ class OaiCiTest(): def Iperf_Module(self, lock, UE_IPAddress, device_id, idx, ue_num, statusQueue,EPC, Module_UE): - SSH = sshconnection.SSHConnection() - #RH temporary quick n dirty for test - SSH.open(EPC.IPAddress, EPC.UserName, EPC.Password) - cmd = 'echo ' + EPC.Password + ' | sudo -S ip link set dev tun5 mtu 1358' - SSH.command(cmd,'\$',5) - SSH.close() - - - #kill iperf processes before (in case there are still some remaining) - SSH.open(Module_UE.HostIPAddress, Module_UE.HostUsername, Module_UE.HostPassword) - cmd = 'killall --signal=SIGKILL iperf' - SSH.command(cmd,'\$',5) - SSH.close() - SSH.open(EPC.IPAddress, EPC.UserName, EPC.Password) - cmd = 'killall --signal=SIGKILL iperf' - SSH.command(cmd,'\$',5) - SSH.close() - - - iperf_time = self.Iperf_ComputeTime() - if self.iperf_direction=="DL": - logging.debug("Iperf for Module in DL mode detected") - #server side UE - SSH.open(Module_UE.HostIPAddress, Module_UE.HostUsername, Module_UE.HostPassword) - cmd = 'rm iperf_server_' + self.testCase_id + '_' + self.ue_id + '.log' - SSH.command(cmd,'\$',5) - cmd = 'echo $USER; nohup /opt/iperf-2.0.10/iperf -s -B ' + UE_IPAddress + ' -u 2>&1 > iperf_server_' + self.testCase_id + '_' + self.ue_id + '.log' - SSH.command(cmd,'\$',5) - SSH.close() - #client side EPC + if (re.match('OAI-Rel14-Docker', EPC.Type, re.IGNORECASE)) or (re.match('OAICN5G', EPC.Type, re.IGNORECASE)): + #retrieve trf-gen container IP address + SSH = sshconnection.SSHConnection() SSH.open(EPC.IPAddress, EPC.UserName, EPC.Password) - cmd = 'rm iperf_client_' + self.testCase_id + '_' + self.ue_id + '.log' - SSH.command(cmd,'\$',5) - cmd = 'iperf -c ' + UE_IPAddress + ' ' + self.iperf_args + ' 2>&1 > iperf_client_' + self.testCase_id + '_' + self.ue_id + '.log' - SSH.command(cmd,'\$',int(iperf_time)*5.0) + SSH.command('docker inspect --format="TRF_IP_ADDR = {{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}" prod-trf-gen', '\$', 5) + result = re.search('TRF_IP_ADDR = (?P[0-9\.]+)', SSH.getBefore()) + if result is not None: + trf_gen_IP = result.group('trf_ip_addr') SSH.close() - #copy the 2 resulting files locally - SSH.copyin(Module_UE.HostIPAddress, Module_UE.HostUsername, Module_UE.HostPassword, 'iperf_server_' + self.testCase_id + '_' + self.ue_id + '.log', '.') - SSH.copyin(EPC.IPAddress, EPC.UserName, EPC.Password, 'iperf_client_' + self.testCase_id + '_' + self.ue_id + '.log', '.') - #send for analysis - filename='iperf_server_' + self.testCase_id + '_' + self.ue_id + '.log' - self.Iperf_analyzeV2Server(lock, UE_IPAddress, device_id, statusQueue, self.iperf_args,filename,1) - - elif self.iperf_direction=="UL":#does not work at the moment - logging.debug("Iperf for Module in UL mode detected") - #server side EPC - SSH.open(EPC.IPAddress, EPC.UserName, EPC.Password) - cmd = 'rm iperf_server_' + self.testCase_id + '_' + self.ue_id + '.log' - SSH.command(cmd,'\$',5) - cmd = 'echo $USER; nohup iperf -s -u 2>&1 > iperf_server_' + self.testCase_id + '_' + self.ue_id + '.log' - SSH.command(cmd,'\$',5) - SSH.close() - - #client side UE + #kill iperf processes on UE side before (in case there are still some remaining) SSH.open(Module_UE.HostIPAddress, Module_UE.HostUsername, Module_UE.HostPassword) - cmd = 'rm iperf_client_' + self.testCase_id + '_' + self.ue_id + '.log' + cmd = 'killall --signal=SIGKILL iperf' SSH.command(cmd,'\$',5) - SSH.command('/opt/iperf-2.0.10/iperf -c 192.172.0.1 ' + self.iperf_args + ' 2>&1 > iperf_client_' + self.testCase_id + '_' + self.ue_id + '.log', '\$', int(iperf_time)*5.0) SSH.close() - #copy the 2 resulting files locally - SSH.copyin(Module_UE.HostIPAddress, Module_UE.HostUsername, Module_UE.HostPassword, 'iperf_client_' + self.testCase_id + '_' + self.ue_id + '.log', '.') - SSH.copyin(EPC.IPAddress, EPC.UserName, EPC.Password, 'iperf_server_' + self.testCase_id + '_' + self.ue_id + '.log', '.') - #send for analysis - filename='iperf_server_' + self.testCase_id + '_' + self.ue_id + '.log' - self.Iperf_analyzeV2Server(lock, UE_IPAddress, device_id, statusQueue, self.iperf_args,filename,1) - else : - logging.debug("Incorrect or missing IPERF direction in XML") + iperf_time = self.Iperf_ComputeTime() + if self.iperf_direction=="DL": + logging.debug("Iperf for Module in DL mode detected") + #server side UE + server_filename='iperf_server_' + self.testCase_id + '_' + self.ue_id + '.log' + SSH.open(Module_UE.HostIPAddress, Module_UE.HostUsername, Module_UE.HostPassword) + cmd = 'rm ' + server_filename + SSH.command(cmd,'\$',5) + cmd = 'echo $USER; nohup iperf -s -B ' + UE_IPAddress + ' -u 2>&1 > ' + server_filename + SSH.command(cmd,'\$',5) + SSH.close() + #client side EPC + SSH.open(EPC.IPAddress, EPC.UserName, EPC.Password) + client_filename = 'iperf_client_' + self.testCase_id + '_' + self.ue_id + '.log' + SSH.command('docker exec -it prod-trf-gen /bin/bash -c "killall --signal SIGKILL iperf"', '\$', 5) + iperf_cmd = 'bin/iperf -c ' + UE_IPAddress + ' ' + self.iperf_args + ' 2>&1 > ' + client_filename + cmd = 'docker exec -it prod-trf-gen /bin/bash -c \"' + iperf_cmd + '\"' + SSH.command(cmd,'\$',int(iperf_time)*5.0) + SSH.command('docker cp prod-trf-gen:/iperf-2.0.13/'+ client_filename + ' ' + EPC.SourceCodePath, '\$', 5) + SSH.copyin(EPC.IPAddress, EPC.UserName, EPC.Password, EPC.SourceCodePath + '/' + client_filename, '.') + SSH.close() - #kill iperf processes after to be clean - SSH.open(Module_UE.HostIPAddress, Module_UE.HostUsername, Module_UE.HostPassword) - cmd = 'killall --signal=SIGKILL iperf' - SSH.command(cmd,'\$',5) - SSH.close() - SSH.open(EPC.IPAddress, EPC.UserName, EPC.Password) - cmd = 'killall --signal=SIGKILL iperf' - SSH.command(cmd,'\$',5) - SSH.close() - return + #copy the 2 resulting files locally + SSH.copyin(Module_UE.HostIPAddress, Module_UE.HostUsername, Module_UE.HostPassword, server_filename, '.') + SSH.copyin(EPC.IPAddress, EPC.UserName, EPC.Password, client_filename, '.') + #send for analysis + self.Iperf_analyzeV2Server(lock, UE_IPAddress, device_id, statusQueue, self.iperf_args,server_filename,1) + + elif self.iperf_direction=="UL": + logging.debug("Iperf for Module in UL mode detected") + #server side EPC + SSH.open(EPC.IPAddress, EPC.UserName, EPC.Password) + server_filename = 'iperf_server_' + self.testCase_id + '_' + self.ue_id + '.log' + SSH.command('docker exec -it prod-trf-gen /bin/bash -c "killall --signal SIGKILL iperf"', '\$', 5) + iperf_cmd = 'echo $USER; nohup bin/iperf -s -u 2>&1 > ' + server_filename + cmd = 'docker exec -it prod-trf-gen /bin/bash -c \"' + iperf_cmd + '\"' + SSH.command(cmd,'\$',5) + SSH.close() + + #client side UE + SSH.open(Module_UE.HostIPAddress, Module_UE.HostUsername, Module_UE.HostPassword) + client_filename = 'iperf_client_' + self.testCase_id + '_' + self.ue_id + '.log' + cmd = 'rm '+ client_filename + SSH.command(cmd,'\$',5) + SSH.command('iperf -B ' + UE_IPAddress + ' -c ' + trf_gen_IP + ' ' + self.iperf_args + ' 2>&1 > ' + client_filename, '\$', int(iperf_time)*5.0) + SSH.close() + + #once client is done, retrieve the server file from container to EPC Host + SSH.open(EPC.IPAddress, EPC.UserName, EPC.Password) + SSH.command('docker cp prod-trf-gen:/iperf-2.0.13/' + server_filename + ' ' + EPC.SourceCodePath, '\$', 5) + SSH.copyin(EPC.IPAddress, EPC.UserName, EPC.Password, EPC.SourceCodePath + '/' + server_filename, '.') + SSH.close() + + #copy the 2 resulting files locally + SSH.copyin(Module_UE.HostIPAddress, Module_UE.HostUsername, Module_UE.HostPassword, client_filename, '.') + SSH.copyin(EPC.IPAddress, EPC.UserName, EPC.Password, server_filename, '.') + #send for analysis + self.Iperf_analyzeV2Server(lock, UE_IPAddress, device_id, statusQueue, self.iperf_args,server_filename,1) + else : + logging.debug("Incorrect or missing IPERF direction in XML") + + else: #default is ltebox + + SSH = sshconnection.SSHConnection() + + #kill iperf processes before (in case there are still some remaining) + SSH.open(Module_UE.HostIPAddress, Module_UE.HostUsername, Module_UE.HostPassword) + cmd = 'killall --signal=SIGKILL iperf' + SSH.command(cmd,'\$',5) + SSH.close() + SSH.open(EPC.IPAddress, EPC.UserName, EPC.Password) + cmd = 'killall --signal=SIGKILL iperf' + SSH.command(cmd,'\$',5) + SSH.close() + + + iperf_time = self.Iperf_ComputeTime() + if self.iperf_direction=="DL": + logging.debug("Iperf for Module in DL mode detected") + #server side UE + SSH.open(Module_UE.HostIPAddress, Module_UE.HostUsername, Module_UE.HostPassword) + cmd = 'rm iperf_server_' + self.testCase_id + '_' + self.ue_id + '.log' + SSH.command(cmd,'\$',5) + cmd = 'echo $USER; nohup /opt/iperf-2.0.10/iperf -s -B ' + UE_IPAddress + ' -u 2>&1 > iperf_server_' + self.testCase_id + '_' + self.ue_id + '.log' + SSH.command(cmd,'\$',5) + SSH.close() + #client side EPC + SSH.open(EPC.IPAddress, EPC.UserName, EPC.Password) + cmd = 'rm iperf_client_' + self.testCase_id + '_' + self.ue_id + '.log' + SSH.command(cmd,'\$',5) + cmd = 'iperf -c ' + UE_IPAddress + ' ' + self.iperf_args + ' 2>&1 > iperf_client_' + self.testCase_id + '_' + self.ue_id + '.log' + SSH.command(cmd,'\$',int(iperf_time)*5.0) + SSH.close() + #copy the 2 resulting files locally + SSH.copyin(Module_UE.HostIPAddress, Module_UE.HostUsername, Module_UE.HostPassword, 'iperf_server_' + self.testCase_id + '_' + self.ue_id + '.log', '.') + SSH.copyin(EPC.IPAddress, EPC.UserName, EPC.Password, 'iperf_client_' + self.testCase_id + '_' + self.ue_id + '.log', '.') + #send for analysis + filename='iperf_server_' + self.testCase_id + '_' + self.ue_id + '.log' + self.Iperf_analyzeV2Server(lock, UE_IPAddress, device_id, statusQueue, self.iperf_args,filename,1) + + elif self.iperf_direction=="UL": + logging.debug("Iperf for Module in UL mode detected") + #server side EPC + SSH.open(EPC.IPAddress, EPC.UserName, EPC.Password) + cmd = 'rm iperf_server_' + self.testCase_id + '_' + self.ue_id + '.log' + SSH.command(cmd,'\$',5) + cmd = 'echo $USER; nohup iperf -s -u 2>&1 > iperf_server_' + self.testCase_id + '_' + self.ue_id + '.log' + SSH.command(cmd,'\$',5) + SSH.close() + + #client side UE + SSH.open(Module_UE.HostIPAddress, Module_UE.HostUsername, Module_UE.HostPassword) + cmd = 'rm iperf_client_' + self.testCase_id + '_' + self.ue_id + '.log' + SSH.command(cmd,'\$',5) + SSH.command('/opt/iperf-2.0.10/iperf -c 192.172.0.1 ' + self.iperf_args + ' 2>&1 > iperf_client_' + self.testCase_id + '_' + self.ue_id + '.log', '\$', int(iperf_time)*5.0) + SSH.close() + + #copy the 2 resulting files locally + SSH.copyin(Module_UE.HostIPAddress, Module_UE.HostUsername, Module_UE.HostPassword, 'iperf_client_' + self.testCase_id + '_' + self.ue_id + '.log', '.') + SSH.copyin(EPC.IPAddress, EPC.UserName, EPC.Password, 'iperf_server_' + self.testCase_id + '_' + self.ue_id + '.log', '.') + #send for analysis + filename='iperf_server_' + self.testCase_id + '_' + self.ue_id + '.log' + self.Iperf_analyzeV2Server(lock, UE_IPAddress, device_id, statusQueue, self.iperf_args,filename,1) + else : + logging.debug("Incorrect or missing IPERF direction in XML") + + #kill iperf processes after to be clean + SSH.open(Module_UE.HostIPAddress, Module_UE.HostUsername, Module_UE.HostPassword) + cmd = 'killall --signal=SIGKILL iperf' + SSH.command(cmd,'\$',5) + SSH.close() + SSH.open(EPC.IPAddress, EPC.UserName, EPC.Password) + cmd = 'killall --signal=SIGKILL iperf' + SSH.command(cmd,'\$',5) + SSH.close() + return def Iperf_common(self, lock, UE_IPAddress, device_id, idx, ue_num, statusQueue,EPC): try: diff --git a/ci-scripts/conf_files/enb.band38.nsa_2x2.100PRB.usrpn310.conf b/ci-scripts/conf_files/enb.band38.nsa_2x2.100PRB.usrpn310.conf index db0802fdd7..3460b82ac5 100644 --- a/ci-scripts/conf_files/enb.band38.nsa_2x2.100PRB.usrpn310.conf +++ b/ci-scripts/conf_files/enb.band38.nsa_2x2.100PRB.usrpn310.conf @@ -14,7 +14,7 @@ eNBs = // Tracking area code, 0x0000 and 0xfffe are reserved values tracking_area_code = 1; - plmn_list = ( { mcc = 208; mnc = 99; mnc_length = 2; } ); + plmn_list = ( { mcc = 208; mnc = 97; mnc_length = 2; } ); tr_s_preference = "local_mac" @@ -31,6 +31,7 @@ eNBs = prefix_type = "NORMAL"; eutra_band = 38; downlink_frequency = 2605000000L; + nr_scg_ssb_freq = 624608; uplink_frequency_offset = 0; Nid_cell = 0; N_RB_DL = 100; @@ -209,8 +210,8 @@ MACRLCs = ( scheduler_mode = "fairRR"; bler_target_upper = 20.0; bler_target_lower = 10.0; - max_ul_rb_index = 24; - puSch10xSnr = 100; + max_ul_rb_index = 27; + puSch10xSnr = 200; puCch10xSnr = 150; } ); diff --git a/ci-scripts/conf_files/gnb.band78.nsa_2x2.106PRB.usrpn310.conf b/ci-scripts/conf_files/gnb.band78.nsa_2x2.106PRB.usrpn310.conf index 24dbdbd74b..aac4f5d220 100644 --- a/ci-scripts/conf_files/gnb.band78.nsa_2x2.106PRB.usrpn310.conf +++ b/ci-scripts/conf_files/gnb.band78.nsa_2x2.106PRB.usrpn310.conf @@ -13,7 +13,7 @@ gNBs = // Tracking area code, 0x0000 and 0xfffe are reserved values tracking_area_code = 1; - plmn_list = ({mcc = 208; mnc = 99; mnc_length = 2;}); + plmn_list = ({mcc = 208; mnc = 97; mnc_length = 2;}); tr_s_preference = "local_mac" @@ -24,6 +24,7 @@ gNBs = pusch_AntennaPorts = 2; pusch_TargetSNRx10 = 200; pucch_TargetSNRx10 = 200; + ul_prbblacklist = "51,52,53,54" servingCellConfigCommon = ( { @@ -33,11 +34,11 @@ gNBs = # downlinkConfigCommon #frequencyInfoDL - # this is 3600 MHz + 84 PRBs@30kHz SCS (same as initial BWP) - absoluteFrequencySSB = 641272; //641032; #641968; 641968=start of ssb at 3600MHz + 82 RBs 641032=center of SSB at center of cell + # this is 3350.04 MHz + 53 PRBs@30kHz SCS (same as initial BWP) + absoluteFrequencySSB = 624608; dl_frequencyBand = 78; - # this is 3600 MHz - dl_absoluteFrequencyPointA = 640000; + # this is 3350.04 MHz + dl_absoluteFrequencyPointA = 623336; #scs-SpecificCarrierList dl_offstToCarrier = 0; # subcarrierSpacing @@ -46,7 +47,7 @@ gNBs = dl_carrierBandwidth = 106; #initialDownlinkBWP #genericParameters - # this is RBstart=84,L=13 (275*(L-1))+RBstart + # this is RBstart=43,L=24 (275*(L-1))+RBstart initialDLBWPlocationAndBandwidth = 6368; # subcarrierSpacing # 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120 @@ -233,7 +234,7 @@ L1s = ( num_cc = 1; tr_n_preference = "local_mac"; pusch_proc_threads = 8; - prach_dtx_threshold = 100; + prach_dtx_threshold = 120; } ); diff --git a/ci-scripts/datalog_rt_stats.yaml b/ci-scripts/datalog_rt_stats.yaml index 548caa0bdd..507ea5d182 100644 --- a/ci-scripts/datalog_rt_stats.yaml +++ b/ci-scripts/datalog_rt_stats.yaml @@ -12,7 +12,8 @@ Ref : feptx_prec : 8.0 feptx_ofdm : 50.0 feptx_total : 75.0 - L1 Tx processing : 300.0 + L1 Tx processing thread 0 : 300.0 + L1 Tx processing thread 1 : 300.0 DLSCH encoding : 230.0 L1 Rx processing : 175.0 PUSCH inner-receiver : 100.0 @@ -24,7 +25,8 @@ Threshold : feptx_prec : 1.25 feptx_ofdm : 1.25 feptx_total : 1.25 - L1 Tx processing : 1.25 + L1 Tx processing thread 0 : 1.25 + L1 Tx processing thread 1 : 1.25 DLSCH encoding : 1.25 L1 Rx processing : 1.25 PUSCH inner-receiver : 1.25 diff --git a/ci-scripts/epc.py b/ci-scripts/epc.py index 1c202438d2..baae5644a1 100644 --- a/ci-scripts/epc.py +++ b/ci-scripts/epc.py @@ -220,7 +220,7 @@ class EPCManagement(): mySSH = SSH.SSHConnection() mySSH.open(self.IPAddress, self.UserName, self.Password) if re.match('ltebox', self.Type, re.IGNORECASE): - logging.debug('Using the sabox simulated HSS') + logging.debug('Using the SABOX simulated HSS') mySSH.command('if [ -d ' + self.SourceCodePath + '/scripts ]; then echo ' + self.Password + ' | sudo -S rm -Rf ' + self.SourceCodePath + '/scripts ; fi', '\$', 5) mySSH.command('mkdir -p ' + self.SourceCodePath + '/scripts', '\$', 5) mySSH.command('cd /opt/hss_sim0609', '\$', 5) @@ -229,6 +229,12 @@ class EPCManagement(): logging.debug('Using the sabox') mySSH.command('cd /opt/ltebox/tools', '\$', 5) mySSH.command('echo ' + self.Password + ' | sudo -S ./start_sabox', '\$', 5) + elif re.match('OAICN5G', self.Type, re.IGNORECASE): + logging.debug('Starting OAI CN5G') + mySSH.command('if [ -d ' + self.SourceCodePath + '/scripts ]; then echo ' + self.Password + ' | sudo -S rm -Rf ' + self.SourceCodePath + '/scripts ; fi', '\$', 5) + mySSH.command('mkdir -p ' + self.SourceCodePath + '/scripts', '\$', 5) + mySSH.command('cd /opt/oai-cn5g-fed/docker-compose', '\$', 5) + mySSH.command('./core-network.sh start nrf spgwu', '\$', 60) else: logging.error('This option should not occur!') mySSH.close() @@ -242,6 +248,16 @@ class EPCManagement(): return if re.match('ltebox', self.Type, re.IGNORECASE): self.MmeIPAddress = self.IPAddress + elif re.match('OAICN5G', self.Type, re.IGNORECASE): + mySSH = SSH.SSHConnection() + mySSH.open(self.IPAddress, self.UserName, self.Password) + response=mySSH.command3('docker container ls -f name=oai-amf', 10) + if len(response)>1: + response=mySSH.command3('docker inspect --format=\'{{range.NetworkSettings.Networks}}{{.IPAddress}}{{end}}\' oai-amf', 10) + tmp = str(response[0],'utf-8') + self.MmeIPAddress = tmp.rstrip() + logging.debug('AMF IP Address ' + self.MmeIPAddress) + mySSH.close() def CheckHSSProcess(self, status_queue): try: @@ -433,6 +449,7 @@ class EPCManagement(): mySSH = SSH.SSHConnection() mySSH.open(self.IPAddress, self.UserName, self.Password) if re.match('ltebox', self.Type, re.IGNORECASE): + logging.debug('Terminating SA BOX') mySSH.command('cd /opt/ltebox/tools', '\$', 5) mySSH.command('echo ' + self.Password + ' | sudo -S ./stop_sabox', '\$', 5) time.sleep(1) @@ -440,6 +457,12 @@ class EPCManagement(): mySSH.command('cd scripts', '\$', 5) time.sleep(1) mySSH.command('echo ' + self.Password + ' | sudo -S screen -S simulated_5g_hss -X quit', '\$', 5) + elif re.match('OAICN5G', self.Type, re.IGNORECASE): + self.LogCollectOAICN5G() + logging.debug('Terminating OAI CN5G') + mySSH.command('cd /opt/oai-cn5g-fed/docker-compose', '\$', 5) + mySSH.command('docker-compose down', '\$', 5) + mySSH.command('./core-network.sh stop nrf spgwu', '\$', 60) else: logging.error('This should not happen!') mySSH.close() @@ -679,3 +702,16 @@ class EPCManagement(): logging.error('This option should not occur!') mySSH.close() + def LogCollectOAICN5G(self): + mySSH = SSH.SSHConnection() + mySSH.open(self.IPAddress, self.UserName, self.Password) + logging.debug('OAI CN5G Collecting Log files to workspace') + mySSH.command('echo ' + self.Password + ' | sudo rm -rf ' + self.SourceCodePath + '/logs', '\$', 5) + mySSH.command('mkdir ' + self.SourceCodePath + '/logs','\$', 5) + containers_list=['oai-smf','oai-spgwu','oai-amf','oai-nrf'] + for c in containers_list: + mySSH.command('docker logs ' + c + ' > ' + self.SourceCodePath + '/logs/' + c + '.log', '\$', 5) + mySSH.command('cd ' + self.SourceCodePath + '/logs', '\$', 5) + mySSH.command('zip oai-cn5g.log.zip *.log', '\$', 60) + mySSH.close() + diff --git a/ci-scripts/main.py b/ci-scripts/main.py index d66c0c6305..9923d515a4 100644 --- a/ci-scripts/main.py +++ b/ci-scripts/main.py @@ -154,6 +154,7 @@ def GetParametersFromXML(action): elif action == 'Initialize_eNB': RAN.eNB_Trace=test.findtext('eNB_Trace') + RAN.eNB_Stats=test.findtext('eNB_Stats') RAN.Initialize_eNB_args=test.findtext('Initialize_eNB_args') eNB_instance=test.findtext('eNB_instance') USRPIPAddress=test.findtext('USRP_IPAddress') diff --git a/ci-scripts/ran.py b/ci-scripts/ran.py index 5e3d8e388f..d732882572 100644 --- a/ci-scripts/ran.py +++ b/ci-scripts/ran.py @@ -39,7 +39,6 @@ import time from multiprocessing import Process, Lock, SimpleQueue import yaml - #----------------------------------------------------------- # OAI Testing modules #----------------------------------------------------------- @@ -94,6 +93,7 @@ class RANManagement(): self.runtime_stats= '' self.datalog_rt_stats={} self.eNB_Trace = '' #if 'yes', Tshark will be launched at initialization + self.eNB_Stats = '' #if 'yes', Statistics Monitor will be launched at initialization self.USRPIPAddress = '' @@ -341,6 +341,8 @@ class RANManagement(): self.testCase_id = HTML.testCase_id mySSH = SSH.SSHConnection() + cwd = os.getcwd() + mySSH.copyout(lIpAddr,lUserName,lPassWord, cwd + "/active_net_interfaces.awk", "/tmp") #reboot USRP if requested in xml if self.USRPIPAddress!='': @@ -461,10 +463,36 @@ class RANManagement(): mySSH.command('if [ -e rbconfig.raw ]; then echo ' + lPassWord + ' | sudo -S rm rbconfig.raw; fi', '\$', 5) mySSH.command('if [ -e reconfig.raw ]; then echo ' + lPassWord + ' | sudo -S rm reconfig.raw; fi', '\$', 5) # NOTE: WE SHALL do a check if the executable is present (in case build went wrong) - mySSH.command('echo "ulimit -c unlimited && ./ran_build/build/' + self.air_interface[self.eNB_instance] + ' -O ' + lSourcePath + '/' + ci_full_config_file + extra_options + '" > ./my-lte-softmodem-run' + str(self.eNB_instance) + '.sh', '\$', 5) + + #hack UHD_RFNOC_DIR variable for gNB / N310 on RHEL8 server: + #if the USRP address is in the xml then we are using an eth USRP (N3xx) + if (self.air_interface[self.eNB_instance] == 'lte-softmodem') or (self.air_interface[self.eNB_instance] == 'ocp-enb'): + gNB = False + else: + gNB = True + if ((self.USRPIPAddress!='') and (gNB==True)): + mySSH.command('echo ' + lPassWord + ' | echo "ulimit -c unlimited && sudo UHD_RFNOC_DIR=/usr/local/share/uhd/rfnoc ./ran_build/build/' + self.air_interface[self.eNB_instance] + ' -O ' + lSourcePath + '/' + ci_full_config_file + extra_options + '" > ./my-lte-softmodem-run' + str(self.eNB_instance) + '.sh', '\$', 5) + #otherwise the regular command is ok + else: + mySSH.command('echo "ulimit -c unlimited && ./ran_build/build/' + self.air_interface[self.eNB_instance] + ' -O ' + lSourcePath + '/' + ci_full_config_file + extra_options + '" > ./my-lte-softmodem-run' + str(self.eNB_instance) + '.sh', '\$', 5) + mySSH.command('chmod 775 ./my-lte-softmodem-run' + str(self.eNB_instance) + '.sh', '\$', 5) mySSH.command('echo ' + lPassWord + ' | sudo -S rm -Rf enb_' + self.testCase_id + '.log', '\$', 5) mySSH.command('echo $USER; nohup sudo -E ./my-lte-softmodem-run' + str(self.eNB_instance) + '.sh > ' + lSourcePath + '/cmake_targets/enb_' + self.testCase_id + '.log 2>&1 &', lUserName, 10) + + + #stats monitoring during runtime + time.sleep(20) + monitor_file='../ci-scripts/stats_monitor.py' + conf_file='../ci-scripts/stats_monitor_conf.yaml' + if self.eNB_Stats=='yes': + if (self.air_interface[self.eNB_instance] == 'lte-softmodem') or (self.air_interface[self.eNB_instance] == 'ocp-enb'): + mySSH.command('echo $USER; nohup python3 ' + monitor_file + ' ' + conf_file + ' enb 2>&1 > enb_stats_monitor_execution.log &', '\$', 5) + else: + mySSH.command('echo $USER; nohup python3 ' + monitor_file + ' ' + conf_file + ' gnb 2>&1 > gnb_stats_monitor_execution.log &', '\$', 5) + + + self.eNBLogFiles[int(self.eNB_instance)] = 'enb_' + self.testCase_id + '.log' if extra_options != '': self.eNBOptions[int(self.eNB_instance)] = extra_options @@ -539,6 +567,8 @@ class RANManagement(): self.eNBstatuses[int(self.eNB_instance)] = int(self.eNB_serverId[self.eNB_instance]) mySSH.close() + + HTML.CreateHtmlTestRow(self.air_interface[self.eNB_instance] + ' -O ' + config_file + extra_options, 'OK', CONST.ALL_PROCESSES_OK) logging.debug('\u001B[1m Initialize eNB/gNB/ocp-eNB Completed\u001B[0m') @@ -657,6 +687,11 @@ class RANManagement(): fileToAnalyze = self.eNBLogFiles[int(self.eNB_instance)] self.eNBLogFiles[int(self.eNB_instance)] = '' if analyzeFile: + #*stats.log files + pickle + png + mySSH.copyin(lIpAddr, lUserName, lPassWord, lSourcePath + '/cmake_targets/*stats.log', '.') + mySSH.copyin(lIpAddr, lUserName, lPassWord, lSourcePath + '/cmake_targets/*.pickle', '.') + mySSH.copyin(lIpAddr, lUserName, lPassWord, lSourcePath + '/cmake_targets/*.png', '.') + # copyin_res = mySSH.copyin(lIpAddr, lUserName, lPassWord, lSourcePath + '/cmake_targets/' + fileToAnalyze, '.') if (copyin_res == -1): logging.debug('\u001B[1;37;41m Could not copy ' + nodeB_prefix + 'NB logfile to analyze it! \u001B[0m') @@ -665,12 +700,20 @@ class RANManagement(): self.eNBmbmsEnables[int(self.eNB_instance)] = False return if self.eNB_serverId[self.eNB_instance] != '0': + #*stats.log files + pickle + png + + #debug / tentative + mySSH.copyout(self.eNBIPAddress, self.eNBUserName, self.eNBPassword, './nrL1_stats.log', self.eNBSourceCodePath + '/cmake_targets/') + mySSH.copyout(self.eNBIPAddress, self.eNBUserName, self.eNBPassword, './nrMAC_stats.log', self.eNBSourceCodePath + '/cmake_targets/') + mySSH.copyout(self.eNBIPAddress, self.eNBUserName, self.eNBPassword, './gnb_stats_monitor.pickle.pickle', self.eNBSourceCodePath + '/cmake_targets/') + mySSH.copyout(self.eNBIPAddress, self.eNBUserName, self.eNBPassword, './gnb_stats_monitor.png', self.eNBSourceCodePath + '/cmake_targets/') + # mySSH.copyout(self.eNBIPAddress, self.eNBUserName, self.eNBPassword, './' + fileToAnalyze, self.eNBSourceCodePath + '/cmake_targets/') logging.debug('\u001B[1m Analyzing ' + nodeB_prefix + 'NB logfile \u001B[0m ' + fileToAnalyze) logStatus = self.AnalyzeLogFile_eNB(fileToAnalyze, HTML) if (logStatus < 0): HTML.CreateHtmlTestRow('N/A', 'KO', logStatus) - self.preamtureExit = True + self.prematureExit = True self.eNBmbmsEnables[int(self.eNB_instance)] = False return else: @@ -691,8 +734,8 @@ class RANManagement(): mySSH.command('echo ' + self.eNBPassword + ' | sudo -S mv /tmp/enb_*.pcap .','\$',20) mySSH.command('echo ' + self.eNBPassword + ' | sudo -S mv /tmp/gnb_*.pcap .','\$',20) mySSH.command('echo ' + self.eNBPassword + ' | sudo -S rm -f enb.log.zip', '\$', 5) - mySSH.command('echo ' + self.eNBPassword + ' | sudo -S zip enb.log.zip enb*.log core* enb_*record.raw enb_*.pcap gnb_*.pcap enb_*txt physim_*.log *stats.log', '\$', 60) - mySSH.command('echo ' + self.eNBPassword + ' | sudo -S rm enb*.log core* enb_*record.raw enb_*.pcap gnb_*.pcap enb_*txt physim_*.log *stats.log', '\$', 5) + mySSH.command('echo ' + self.eNBPassword + ' | sudo -S zip enb.log.zip enb*.log core* enb_*record.raw enb_*.pcap gnb_*.pcap enb_*txt physim_*.log *stats.log *monitor.pickle *monitor.png', '\$', 60) + mySSH.command('echo ' + self.eNBPassword + ' | sudo -S rm enb*.log core* enb_*record.raw enb_*.pcap gnb_*.pcap enb_*txt physim_*.log *stats.log *.pickle *.png', '\$', 5) mySSH.close() def AnalyzeLogFile_eNB(self, eNBlogFile, HTML): @@ -1032,7 +1075,7 @@ class RANManagement(): for k in datalog_rt_stats['Data']: if float(datalog_rt_stats['Data'][k][2])> datalog_rt_stats['Threshold'][k]: #condition for fail : avg/ref is greater than the fixed threshold #setting prematureExit is ok although not the best option - self.prematureExit=True + self.prematureExit=False #temp for debug : do not stop the test if RT stats are excedeed else: statMsg = 'No real time stats found in the log file\n' logging.debug('No real time stats found in the log file') diff --git a/ci-scripts/sshconnection.py b/ci-scripts/sshconnection.py index b4087c9695..b85c40a0be 100644 --- a/ci-scripts/sshconnection.py +++ b/ci-scripts/sshconnection.py @@ -163,6 +163,18 @@ class SSHConnection(): lSsh = subprocess.Popen(["ssh", "%s" % myHost, commandline],shell=False,stdout=subprocess.PIPE,stderr=subprocess.PIPE) self.cmd2Results = str(lSsh.stdout.readlines()) + def command3(self, commandline, timeout, silent=False): + if not silent: + logging.debug(commandline) + self.cmd2Results = '' + myHost = self.username + '@' + self.ipaddress + # CAUTION: THIS METHOD IMPLIES THAT THERE ARE VALID SSH KEYS + # BETWEEN THE PYTHON EXECUTOR NODE AND THE REMOTE HOST + # OTHERWISE IT WON'T WORK + lSsh = subprocess.Popen(["ssh", "%s" % myHost, commandline],shell=False,stdout=subprocess.PIPE,stderr=subprocess.PIPE) + return lSsh.stdout.readlines() + + def close(self): self.ssh.timeout = 5 self.ssh.sendline('exit') diff --git a/ci-scripts/stats_monitor.py b/ci-scripts/stats_monitor.py new file mode 100755 index 0000000000..877194de59 --- /dev/null +++ b/ci-scripts/stats_monitor.py @@ -0,0 +1,102 @@ +""" +To create graphs and pickle from runtime statistics in L1,MAC,RRC,PDCP files +""" + +import subprocess +import time +import shlex +import re +import sys +import pickle +import matplotlib.pyplot as plt +import numpy as np +import yaml + + +class StatMonitor(): + def __init__(self,cfg_file): + with open(cfg_file,'r') as file: + self.d = yaml.load(file) + for node in self.d: + for metric in self.d[node]: + self.d[node][metric]=[] + + + def process_gnb (self,node_type,output): + for line in output: + tmp=line.decode("utf-8") + result=re.match(r'^.*\bdlsch_rounds\b ([0-9]+)\/([0-9]+).*\bdlsch_errors\b ([0-9]+)',tmp) + if result is not None: + self.d[node_type]['dlsch_err'].append(int(result.group(3))) + percentage=float(result.group(2))/float(result.group(1)) + self.d[node_type]['dlsch_err_perc_round_1'].append(percentage) + result=re.match(r'^.*\bulsch_rounds\b ([0-9]+)\/([0-9]+).*\bulsch_errors\b ([0-9]+)',tmp) + if result is not None: + self.d[node_type]['ulsch_err'].append(int(result.group(3))) + percentage=float(result.group(2))/float(result.group(1)) + self.d[node_type]['ulsch_err_perc_round_1'].append(percentage) + + + def process_enb (self,node_type,output): + for line in output: + tmp=line.decode("utf-8") + result=re.match(r'^.*\bPHR\b ([0-9]+).+\bbler\b ([0-9]+\.[0-9]+).+\bmcsoff\b ([0-9]+).+\bmcs\b ([0-9]+)',tmp) + if result is not None: + self.d[node_type]['PHR'].append(int(result.group(1))) + self.d[node_type]['bler'].append(float(result.group(2))) + self.d[node_type]['mcsoff'].append(int(result.group(3))) + self.d[node_type]['mcs'].append(int(result.group(4))) + + + def collect(self,node_type): + if node_type=='enb': + cmd='cat L1_stats.log MAC_stats.log PDCP_stats.log RRC_stats.log' + else: #'gnb' + cmd='cat nrL1_stats.log nrMAC_stats.log nrPDCP_stats.log nrRRC_stats.log' + process=subprocess.Popen(shlex.split(cmd), stdout=subprocess.PIPE) + output = process.stdout.readlines() + if node_type=='enb': + self.process_enb(node_type,output) + else: #'gnb' + self.process_gnb(node_type,output) + + + def graph(self,node_type): + col = 1 + figure, axis = plt.subplots(len(self.d[node_type]), col ,figsize=(10, 10)) + i=0 + for metric in self.d[node_type]: + major_ticks = np.arange(0, len(self.d[node_type][metric])+1, 1) + axis[i].set_xticks(major_ticks) + axis[i].set_xticklabels([]) + axis[i].plot(self.d[node_type][metric],marker='o') + axis[i].set_xlabel('time') + axis[i].set_ylabel(metric) + axis[i].set_title(metric) + i+=1 + + plt.tight_layout() + # Combine all the operations and display + plt.savefig(node_type+'_stats_monitor.png') + plt.show() + + +if __name__ == "__main__": + + cfg_filename = sys.argv[1] #yaml file as metrics config + node = sys.argv[2]#enb or gnb + mon=StatMonitor(cfg_filename) + + #collecting stats when modem process is stopped + CMD='ps aux | grep mode | grep -v grep' + process=subprocess.Popen(CMD, shell=True, stdout=subprocess.PIPE) + output = process.stdout.readlines() + while len(output)!=0 : + mon.collect(node) + process=subprocess.Popen(CMD, shell=True, stdout=subprocess.PIPE) + output = process.stdout.readlines() + time.sleep(1) + print('Process stopped') + with open(node+'_stats_monitor.pickle', 'wb') as handle: + pickle.dump(mon.d, handle, protocol=pickle.HIGHEST_PROTOCOL) + mon.graph(node) diff --git a/ci-scripts/stats_monitor.py.old b/ci-scripts/stats_monitor.py.old new file mode 100755 index 0000000000..ae9b39bfa6 --- /dev/null +++ b/ci-scripts/stats_monitor.py.old @@ -0,0 +1,94 @@ +import subprocess +import time +import shlex +import re +import sys +import matplotlib.pyplot as plt +import pickle +import numpy as np +import os + +def collect(d, node_type): + if node_type=='enb': + cmd='cat L1_stats.log MAC_stats.log PDCP_stats.log RRC_stats.log' + else: #'gnb' + cmd='cat nrL1_stats.log nrMAC_stats.log nrPDCP_stats.log nrRRC_stats.log' + process=subprocess.Popen(shlex.split(cmd), stdout=subprocess.PIPE) + output = process.stdout.readlines() + for l in output: + tmp=l.decode("utf-8") + result=re.match(rf'^.*\bPHR\b ([0-9]+).+\bbler\b ([0-9]+\.[0-9]+).+\bmcsoff\b ([0-9]+).+\bmcs\b ([0-9]+)',tmp) + if result is not None: + d['PHR'].append(int(result.group(1))) + d['bler'].append(float(result.group(2))) + d['mcsoff'].append(int(result.group(3))) + d['mcs'].append(int(result.group(4))) + + +def graph(d, node_type): + + + figure, axis = plt.subplots(4, 1,figsize=(10, 10)) + + major_ticks = np.arange(0, len(d['PHR'])+1, 1) + axis[0].set_xticks(major_ticks) + axis[0].set_xticklabels([]) + axis[0].plot(d['PHR'],marker='o') + axis[0].set_xlabel('time') + axis[0].set_ylabel('PHR') + axis[0].set_title("PHR") + + major_ticks = np.arange(0, len(d['bler'])+1, 1) + axis[1].set_xticks(major_ticks) + axis[1].set_xticklabels([]) + axis[1].plot(d['bler'],marker='o') + axis[1].set_xlabel('time') + axis[1].set_ylabel('bler') + axis[1].set_title("bler") + + major_ticks = np.arange(0, len(d['mcsoff'])+1, 1) + axis[2].set_xticks(major_ticks) + axis[2].set_xticklabels([]) + axis[2].plot(d['mcsoff'],marker='o') + axis[2].set_xlabel('time') + axis[2].set_ylabel('mcsoff') + axis[2].set_title("mcsoff") + + major_ticks = np.arange(0, len(d['mcs'])+1, 1) + axis[3].set_xticks(major_ticks) + axis[3].set_xticklabels([]) + axis[3].plot(d['mcs'],marker='o') + axis[3].set_xlabel('time') + axis[3].set_ylabel('mcs') + axis[3].set_title("mcs") + + plt.tight_layout() + # Combine all the operations and display + plt.savefig(node_type+'_stats_monitor.png') + plt.show() + +if __name__ == "__main__": + + node_type = sys.argv[1]#enb or gnb + + d={} + d['PHR']=[] + d['bler']=[] + d['mcsoff']=[] + d['mcs']=[] + + + cmd='ps aux | grep modem | grep -v grep' + process=subprocess.Popen(cmd, shell=True, stdout=subprocess.PIPE) + output = process.stdout.readlines() + while len(output)!=0 : + collect(d, node_type) + process=subprocess.Popen(cmd, shell=True, stdout=subprocess.PIPE) + output = process.stdout.readlines() + time.sleep(1) + print('process stopped') + with open(node_type+'_stats_monitor.pickle', 'wb') as handle: + pickle.dump(d, handle, protocol=pickle.HIGHEST_PROTOCOL) + graph(d, node_type) + + diff --git a/ci-scripts/stats_monitor_conf.yaml b/ci-scripts/stats_monitor_conf.yaml new file mode 100644 index 0000000000..6c0a2b0225 --- /dev/null +++ b/ci-scripts/stats_monitor_conf.yaml @@ -0,0 +1,11 @@ +enb : + PHR: + bler: + mcsoff: + mcs: + +gnb : + dlsch_err: + dlsch_err_perc_round_1: + ulsch_err: + ulsch_err_perc_round_1: \ No newline at end of file diff --git a/ci-scripts/stats_monitor_dev.py b/ci-scripts/stats_monitor_dev.py new file mode 100755 index 0000000000..14a2ef6a45 --- /dev/null +++ b/ci-scripts/stats_monitor_dev.py @@ -0,0 +1,103 @@ +import subprocess +import time +import shlex +import re +import sys +import matplotlib.pyplot as plt +import pickle +import numpy as np +import os +import yaml + + +class Stat_Monitor(): + def __init__(self,): + with open('stats_monitor_conf.yaml','r') as f: + self.d = yaml.load(f) + for node in self.d: + for metric in self.d[node]: + self.d[node][metric]=[] + + + def process_gnb (self,node_type,output): + for line in output: + tmp=line.decode("utf-8") + result=re.match(r'^.*\bdlsch_rounds\b ([0-9]+)\/([0-9]+).*\bdlsch_errors\b ([0-9]+)',tmp) + if result is not None: + self.d[node_type]['dlsch_err'].append(int(result.group(3))) + percentage=float(result.group(2))/float(result.group(1)) + self.d[node_type]['dlsch_err_perc_round_1'].append(percentage) + result=re.match(r'^.*\bulsch_rounds\b ([0-9]+)\/([0-9]+).*\bulsch_errors\b ([0-9]+)',tmp) + if result is not None: + self.d[node_type]['ulsch_err'].append(int(result.group(3))) + percentage=float(result.group(2))/float(result.group(1)) + self.d[node_type]['ulsch_err_perc_round_1'].append(percentage) + + + def process_enb (self,node_type,output): + for line in output: + tmp=line.decode("utf-8") + result=re.match(r'^.*\bPHR\b ([0-9]+).+\bbler\b ([0-9]+\.[0-9]+).+\bmcsoff\b ([0-9]+).+\bmcs\b ([0-9]+)',tmp) + if result is not None: + self.d[node_type]['PHR'].append(int(result.group(1))) + self.d[node_type]['bler'].append(float(result.group(2))) + self.d[node_type]['mcsoff'].append(int(result.group(3))) + self.d[node_type]['mcs'].append(int(result.group(4))) + + + + + + def collect(self,node_type): + if node_type=='enb': + cmd='cat L1_stats.log MAC_stats.log PDCP_stats.log RRC_stats.log' + else: #'gnb' + cmd='cat nrL1_stats.log nrMAC_stats.log nrPDCP_stats.log nrRRC_stats.log' + process=subprocess.Popen(shlex.split(cmd), stdout=subprocess.PIPE) + output = process.stdout.readlines() + if node_type=='enb': + self.process_enb(node_type,output) + else: #'gnb' + self.process_gnb(node_type,output) + + def graph(self,node_type): + + col = 1 + figure, axis = plt.subplots(len(self.d[node_type]), col ,figsize=(10, 10)) + i=0 + for metric in self.d[node_type]: + major_ticks = np.arange(0, len(self.d[node_type][metric])+1, 1) + axis[i].set_xticks(major_ticks) + axis[i].set_xticklabels([]) + axis[i].plot(self.d[node_type][metric],marker='o') + axis[i].set_xlabel('time') + axis[i].set_ylabel(metric) + axis[i].set_title(metric) + i+=1 + + plt.tight_layout() + # Combine all the operations and display + plt.savefig(node_type+'_stats_monitor.png') + plt.show() + + +if __name__ == "__main__": + + node_type = sys.argv[1]#enb or gnb + mon=Stat_Monitor() + + #collecting stats when modem process is stopped + cmd='ps aux | grep mode | grep -v grep' + process=subprocess.Popen(cmd, shell=True, stdout=subprocess.PIPE) + output = process.stdout.readlines() + while len(output)!=0 : + mon.collect(node_type) + process=subprocess.Popen(cmd, shell=True, stdout=subprocess.PIPE) + output = process.stdout.readlines() + time.sleep(1) + print('Process stopped') + with open(node_type+'_stats_monitor.pickle', 'wb') as handle: + pickle.dump(mon.d, handle, protocol=pickle.HIGHEST_PROTOCOL) + mon.graph(node_type) + + diff --git a/ci-scripts/xml_files/fr1_enb_build.xml b/ci-scripts/xml_files/fr1_enb_build.xml new file mode 100644 index 0000000000..084f58a591 --- /dev/null +++ b/ci-scripts/xml_files/fr1_enb_build.xml @@ -0,0 +1,50 @@ + + + build-tab + Build + wrench + + 000001 + 000002 + + + + + Build_eNB + Build eNB + -w USRP -c --eNB --ninja + 0 + 0 + True + True + + + + WaitEndBuild_eNB + Wait for end of Build eNB + 0 + 0 + + + diff --git a/ci-scripts/xml_files/fr1_gnb_build.xml b/ci-scripts/xml_files/fr1_gnb_build.xml index d0c91f407d..43cff75620 100644 --- a/ci-scripts/xml_files/fr1_gnb_build.xml +++ b/ci-scripts/xml_files/fr1_gnb_build.xml @@ -26,7 +26,6 @@ wrench 000001 - 000002 @@ -36,7 +35,6 @@ -w USRP -c --gNB --ninja 0 0 - True True diff --git a/ci-scripts/xml_files/fr1_lte_2x2_quectel.xml b/ci-scripts/xml_files/fr1_lte_2x2_quectel.xml new file mode 100644 index 0000000000..86d9e5d5f0 --- /dev/null +++ b/ci-scripts/xml_files/fr1_lte_2x2_quectel.xml @@ -0,0 +1,141 @@ + + + TEST-LTE-TM2 + LTE 2x2 Ping DL UL with QUECTEL + tasks + 1 + + 030000 + 000002 + 010000 + 000001 + 050000 + 050001 + 000002 + 070000 + 070001 + 000001 + 010002 + 080000 + + + + + Initialize_UE + Initialize Quectel + nrmodule2_quectel + yes + + + + + Terminate_UE + Terminate Quectel + nrmodule2_quectel + + + + + Initialize_eNB + Initialize eNB + -O ci-scripts/conf_files/enb.band38.nsa_2x2.100PRB.usrpn310.conf --usrp-tx-thread-config 1 --thread-pool 0,2,4,6 + 0 + 0 + lte + yes + yes + 192.168.18.241 + + + + + IdleSleep + Sleep + 5 + + + + IdleSleep + Sleep + 20 + + + + + Ping + Ping: 20 pings + nrmodule2_quectel + -c 20 + 5 + + + Ping + Ping: 100 pings, size 1024 + nrmodule2_quectel + -c 100 -s 1024 -i 0,2 + 5 + + + + + Iperf + iperf (DL/26Mbps/UDP)(60 sec)(single-ue profile) + -u -b 26M -t 60 + DL + nrmodule2_quectel + 5 + single-ue + + + + Iperf + iperf (UL/7Mbps/UDP)(60 sec)(single-ue profile) + -u -b 7M -t 60 + UL + nrmodule2_quectel + 5 + single-ue + + + + + + + Terminate_eNB + Terminate eNB + 0 + 0 + lte + + + + Terminate_eNB + Terminate gNB + 1 + 1 + nr + + + + diff --git a/ci-scripts/xml_files/fr1_multi_node_build.xml b/ci-scripts/xml_files/fr1_multi_node_build.xml index 57c4685341..60bc734e65 100644 --- a/ci-scripts/xml_files/fr1_multi_node_build.xml +++ b/ci-scripts/xml_files/fr1_multi_node_build.xml @@ -26,7 +26,7 @@ wrench 000001 000002 - 000003 000004 + 000004 000005 000003 @@ -64,5 +64,10 @@ 1 + + IdleSleep + Sleep + 120 + diff --git a/ci-scripts/xml_files/fr1_nsa_2x2_quectel.xml b/ci-scripts/xml_files/fr1_nsa_2x2_quectel.xml index a8e385b854..03dea36607 100644 --- a/ci-scripts/xml_files/fr1_nsa_2x2_quectel.xml +++ b/ci-scripts/xml_files/fr1_nsa_2x2_quectel.xml @@ -21,8 +21,8 @@ --> - TEST-NSA-FR1-TM1 - NSA Ping DL UL with QUECTEL + TEST-NSA-FR1-TM2 + NSA 2x2 Ping DL UL with QUECTEL tasks 1 @@ -32,6 +32,9 @@ 010000 000001 050000 + 000002 + 070000 + 070001 000001 010002 080001 @@ -57,11 +60,12 @@ Initialize_eNB Initialize eNB - -O ci-scripts/conf_files/enb.band38.nsa_2x2.100PRB.usrpn310.conf + -O ci-scripts/conf_files/enb.band38.nsa_2x2.100PRB.usrpn310.conf --usrp-tx-thread-config 1 --thread-pool 0,2,4,6 0 0 lte yes + yes 192.168.18.241 @@ -69,10 +73,11 @@ Initialize_eNB Initialize gNB - -O ci-scripts/conf_files/gnb.band78.nsa_2x2.106PRB.usrpn310.conf -q + -O ci-scripts/conf_files/gnb.band78.nsa_2x2.106PRB.usrpn310.conf -q --usrp-tx-thread-config 1 --thread-pool 0,2,4,6 1 1 nr + yes 192.168.18.240 @@ -111,17 +116,17 @@ -u -b 20M -t 60 DL nrmodule2_quectel - 50 + 5 single-ue Iperf - iperf (UL/3Mbps/UDP)(60 sec)(single-ue profile) - -u -b 3M -t 60 + iperf (UL/1Mbps/UDP)(20 sec)(single-ue profile) + -u -b 1M -t 20 UL nrmodule2_quectel - 50 + 5 single-ue diff --git a/ci-scripts/xml_files/fr1_oai_cn_deploy.xml b/ci-scripts/xml_files/fr1_oai_cn_deploy.xml index 919def7aa3..1ccc952c56 100644 --- a/ci-scripts/xml_files/fr1_oai_cn_deploy.xml +++ b/ci-scripts/xml_files/fr1_oai_cn_deploy.xml @@ -33,7 +33,7 @@ Deploy_EPC Deploy all EPC containers - yaml_files/fr1_epc_tim + yaml_files/fr1_epc_20897 diff --git a/ci-scripts/xml_files/fr1_sa_quectel.xml b/ci-scripts/xml_files/fr1_sa_quectel.xml index 4c8fba0611..9b658b5483 100644 --- a/ci-scripts/xml_files/fr1_sa_quectel.xml +++ b/ci-scripts/xml_files/fr1_sa_quectel.xml @@ -31,6 +31,9 @@ 010000 000001 050000 + 050001 + 070000 + 070001 000001 010002 080000 @@ -55,11 +58,12 @@ Initialize_eNB Initialize gNB - -O ci-scripts/conf_files/gnb.band78.sa.fr1.106PRB.usrpn310.conf --sa -q + -O ci-scripts/conf_files/gnb.band78.sa.fr1.106PRB.usrpn310.conf --sa -q --usrp-tx-thread-config 1 --thread-pool 0,2,4,6 0 0 nr yes + yes 192.168.18.240 @@ -81,34 +85,26 @@ Ping: 20pings in 20sec nrmodule2_quectel -c 20 - 50 - - - - Ping - Ping: 100pings in 20sec - nrmodule2_quectel - -c 100 -i 0.2 - 50 + 5 Iperf - iperf (DL/20Mbps/UDP)(60 sec)(single-ue profile) - -u -b 20M -t 60 + iperf (DL/5Mbps/UDP)(60 sec)(single-ue profile) + -u -b 5M -t 60 DL nrmodule2_quectel - 50 + 5 single-ue Iperf - iperf (UL/3Mbps/UDP)(60 sec)(single-ue profile) - -u -b 3M -t 60 + iperf (UL/1Mbps/UDP)(60 sec)(single-ue profile) + -u -b 1M -t 60 UL nrmodule2_quectel - 50 + 5 single-ue diff --git a/ci-scripts/yaml_files/5g_rfsimulator/README.md b/ci-scripts/yaml_files/5g_rfsimulator/README.md index 1351d6742b..915b71296f 100644 --- a/ci-scripts/yaml_files/5g_rfsimulator/README.md +++ b/ci-scripts/yaml_files/5g_rfsimulator/README.md @@ -14,6 +14,8 @@ This page is only valid for an `Ubuntu18` host. +**NOTE: this version (2021-10-05) is valid for the `v1.1.0` and `v1.2.0` versions of the `OAI 5G CN`.** + **TABLE OF CONTENTS** 1. [Retrieving the images on Docker-Hub](#1-retrieving-the-images-on-docker-hub) @@ -26,6 +28,9 @@ This page is only valid for an `Ubuntu18` host. 2. [Start the iperf server inside the NR-UE container](#32-start-the-iperf-server-inside-the-nr-ue-container) 3. [Start the iperf client inside the ext-dn container](#33-start-the-iperf-client-inside-the-ext-dn-container) 4. [Un-deployment](#4-un-deployment) +5. [Explanations on the configuration in the docker-compose.yaml](##5-explanations-on-the-configuration-in-the-docker-composeyaml) + 1. [Making the NR-UE connect to the core network](#51-making-the-nr-ue-connect-to-the-core-network) + 2. [Making the gNB connect to the core network](#52-making-the-gnb-connect-to-the-core-network) # 1. Retrieving the images on Docker-Hub # @@ -71,6 +76,10 @@ $ docker image tag rdefosseoai/oai-nr-ue:develop oai-nr-ue:develop $ docker logout ``` +**CAUTION: 2021/10/05 with the release `v1.2.0` of the `CN5G`, the previous version was not compatible any-more.** + +**This new version is working for both the `v1.1.0` and `v1.2.0` of the `CN5G`.** + # 2. Deploy containers # ![Deployment](./oai-end-to-end.jpg) @@ -137,6 +146,8 @@ rfsim5g-traffic: flags=4163 mtu 1500 ## 2.2. Deploy OAI gNB in RF simulator mode and in Standalone Mode ## +**CAUTION: To execute this 2nd step, the whole `CN5G` SHALL be in `healthy` state (especially the `mysql` container).** + ```bash $ docker-compose up -d oai-gnb rfsim5g-oai-nrf is up-to-date @@ -160,6 +171,18 @@ rfsim5g-oai-smf /bin/bash -c /openair-smf/ ... Up (healthy) 80/tcp, 880 rfsim5g-oai-spgwu /openair-spgwu-tiny/bin/en ... Up (healthy) 2152/udp, 8805/udp ``` +You can verify that the `gNB` is connected with the `AMF`: + +```bagh +$ docker logs rfsim5g-oai-amf +... +[AMF] [amf_app] [info ] |----------------------------------------------------gNBs' information-------------------------------------------| +[AMF] [amf_app] [info ] | Index | Status | Global ID | gNB Name | PLMN | +[AMF] [amf_app] [info ] | 1 | Connected | 0x0 | gnb-rfsim | 208, 99 | +[AMF] [amf_app] [info ] |----------------------------------------------------------------------------------------------------------------| +... +``` + ## 2.3. Deploy OAI NR-UE in RF simulator mode and in Standalone Mode ## ```bash @@ -366,3 +389,47 @@ Removing rfsim5g-mysql ... done Removing network rfsim5g-oai-public-net Removing network rfsim5g-oai-traffic_net-net ``` + +# 5. Explanations on the configuration in the `docker-compose.yaml` # + +## 5.1. Making the NR-UE connect to the core network ## + +The NR-UE **SHALL** be provisioned in the core network, especially in the `SQL` database and in the `AMF`. + +* in AMF section of `docker-compose.yaml` --> `OPERATOR_KEY=c42449363bbad02b66d16bc975d77cc1` +* in NR-UE section --> `OPC: 'C42449363BBAD02B66D16BC975D77CC1' + +Both values shall match! + +This value is also present in the `oai_db.sql` file: + +```bash +INSERT INTO `users` VALUES ('208990100001100','1','55000000000000',NULL,'PURGED',50,40000000,100000000,47,0000000000,1,0xfec86ba6eb707ed08905757b1bb44b8f,0,0,0x40,'ebd07771ace8677a',0xc42449363bbad02b66d16bc975d77cc1); +``` + +As you can see, 2 other values shall match in the NR-UE section of `docker-compose.yaml`: + +* `FULL_IMSI: '208990100001100'` +* `FULL_KEY: 'fec86ba6eb707ed08905757b1bb44b8f'` + +We are also using a dedicated `oai-smf.conf` for the `SMF` container: the `oai` DNN shall match the one in the NR-UE section of `docker-compose.yaml` (`DNN: oai`). + +## 5.2. Making the gNB connect to the core network ## + +Mainly you need to match the PLMN in `gNB`, `AMF` and `SPGWU` parameters: + +* `AMF` + - `MCC=208` + - `MNC=99` + - `PLMN_SUPPORT_TAC=0x0001` + - ... +* `SPGWU` + - `MCC=208` + - `MNC=99` + - `TAC=1` +* `gNB` + - `MCC: '208'` + - `MNC: '99'` + - `TAC: 1` + +The `ST` and `SD` values shall also match. diff --git a/ci-scripts/yaml_files/5g_rfsimulator/docker-compose.yaml b/ci-scripts/yaml_files/5g_rfsimulator/docker-compose.yaml index 5da7a353ab..31d64f35dc 100644 --- a/ci-scripts/yaml_files/5g_rfsimulator/docker-compose.yaml +++ b/ci-scripts/yaml_files/5g_rfsimulator/docker-compose.yaml @@ -90,11 +90,14 @@ services: - USE_FQDN_DNS=yes - NRF_API_VERSION=v1 - NRF_FQDN=oai-nrf - - AUSF_IPV4_ADDRESS=127.0.0.1 + - EXTERNAL_AUSF=no + - AUSF_IPV4_ADDRESS=0.0.0.0 - AUSF_PORT=80 - AUSF_API_VERSION=v1 + - AUSF_FQDN=localhost depends_on: - oai-nrf + - mysql volumes: - ./amf-healthcheck.sh:/openair-amf/bin/amf-healthcheck.sh healthcheck: @@ -139,6 +142,7 @@ services: - USE_FQDN_DNS=yes depends_on: - oai-nrf + - oai-amf volumes: - ./smf-healthcheck.sh:/openair-smf/bin/smf-healthcheck.sh - ./oai-smf.conf:/openair-smf/bin/oai-smf.conf @@ -183,6 +187,7 @@ services: - DNN_0=oai depends_on: - oai-nrf + - oai-smf cap_add: - NET_ADMIN - SYS_ADMIN @@ -285,7 +290,7 @@ networks: com.docker.network.bridge.name: "rfsim5g-public" traffic_net: driver: bridge - name: rfsim5g-oai-traffic_net-net + name: rfsim5g-oai-traffic-net ipam: config: - subnet: 192.168.72.128/26 diff --git a/ci-scripts/yaml_files/fr1_epc_tim/docker-compose.yml b/ci-scripts/yaml_files/fr1_epc_20897/docker-compose.yml similarity index 95% rename from ci-scripts/yaml_files/fr1_epc_tim/docker-compose.yml rename to ci-scripts/yaml_files/fr1_epc_20897/docker-compose.yml index 73a6b3a1ff..0005ce8844 100644 --- a/ci-scripts/yaml_files/fr1_epc_tim/docker-compose.yml +++ b/ci-scripts/yaml_files/fr1_epc_20897/docker-compose.yml @@ -51,7 +51,7 @@ services: LTE_K: FEC86BA6EB707ED08905757B1BB44B8F APN1: oai.ipv4 APN2: oai2.ipv4 - FIRST_IMSI: 208990100001127 + FIRST_IMSI: 208970100001127 NB_USERS: 5 healthcheck: test: /bin/bash -c "pgrep oai_hss" @@ -78,7 +78,7 @@ services: HSS_FQDN: hss.openairinterface.org HSS_REALM: openairinterface.org MCC: '208' - MNC: '99' + MNC: '97' MME_GID: 32768 MME_CODE: 3 TAC_0: 1 @@ -97,15 +97,15 @@ services: PEER_MME_IPV4_ADDRESS_FOR_S10_0: 0.0.0.0 PEER_MME_IPV4_ADDRESS_FOR_S10_1: 0.0.0.0 MCC_SGW_0: '208' - MNC3_SGW_0: '099' + MNC3_SGW_0: '097' TAC_LB_SGW_0: '01' TAC_HB_SGW_0: '00' MCC_MME_0: '208' - MNC3_MME_0: '099' + MNC3_MME_0: '097' TAC_LB_MME_0: '02' TAC_HB_MME_0: '00' MCC_MME_1: '208' - MNC3_MME_1: '099' + MNC3_MME_1: '097' TAC_LB_MME_1: '03' TAC_HB_MME_1: '00' TAC_LB_SGW_TEST_0: '03' @@ -138,11 +138,12 @@ services: UE_IP_ADDRESS_POOL_1: '12.1.1.2 - 12.1.1.254' UE_IP_ADDRESS_POOL_2: '12.0.0.2 - 12.0.0.254' MCC: '208' - MNC: '99' - MNC03: '099' + MNC: '97' + MNC03: '097' TAC: 1 GW_ID: 1 REALM: openairinterface.org + UE_MTU_IPV4: 1500 healthcheck: test: /bin/bash -c "pgrep oai_spgwc" interval: 10s @@ -168,8 +169,8 @@ services: NETWORK_UE_IP: '12.1.1.0/24' NETWORK_UE_NAT_OPTION: 'yes' MCC: '208' - MNC: '99' - MNC03: '099' + MNC: '97' + MNC03: '097' TAC: 1 GW_ID: 1 REALM: openairinterface.org diff --git a/ci-scripts/yaml_files/fr1_epc_tim/docker-compose.yml.orig b/ci-scripts/yaml_files/fr1_epc_tim/docker-compose.yml.orig deleted file mode 100644 index 28ae154838..0000000000 --- a/ci-scripts/yaml_files/fr1_epc_tim/docker-compose.yml.orig +++ /dev/null @@ -1,203 +0,0 @@ -version: '3.8' - -services: - cassandra: - image: cassandra:2.1 - container_name: prod-cassandra - networks: - private_net: - ipv4_address: 192.168.68.2 - environment: - CASSANDRA_CLUSTER_NAME: "OAI HSS Cluster" - CASSANDRA_ENDPOINT_SNITCH: GossipingPropertyFileSnitch - healthcheck: - test: /bin/bash -c "nodetool status" - interval: 10s - timeout: 5s - retries: 5 - - db_init: - image: cassandra:2.1 - container_name: prod-db-init - depends_on: [cassandra] - deploy: - restart_policy: - condition: on-failure - max_attempts: 10 - networks: - private_net: - ipv4_address: 192.168.68.4 - volumes: - - ./oai_db.cql:/home/oai_db.cql - entrypoint: /bin/bash -c "cqlsh --file /home/oai_db.cql 192.168.68.2 && echo 'OK'" - - oai_hss: - image: oai-hss:production - container_name: prod-oai-hss - privileged: true - depends_on: [cassandra] - networks: - private_net: - ipv4_address: 192.168.68.3 - public_net: - ipv4_address: 192.168.61.2 - environment: - REALM: openairinterface.org - HSS_FQDN: hss.openairinterface.org - PREFIX: /openair-hss/etc - cassandra_Server_IP: 192.168.68.2 - OP_KEY: 1006020f0a478bf6b699f15c062e42b3 - LTE_K: fec86ba6eb707ed08905757b1bb44b8f - APN1: oai.ipv4 - APN2: internet - FIRST_IMSI: 222010100001120 - NB_USERS: 10 - healthcheck: - test: /bin/bash -c "pgrep oai_hss" - interval: 10s - timeout: 5s - retries: 5 - - oai_mme: - image: oai-mme:production - container_name: prod-oai-mme - privileged: true - depends_on: [oai_hss] - networks: - public_net: - ipv4_address: 192.168.61.3 - environment: - REALM: openairinterface.org - PREFIX: /openair-mme/etc - INSTANCE: 1 - PID_DIRECTORY: /var/run - HSS_IP_ADDR: 192.168.61.2 - HSS_HOSTNAME: hss - HSS_FQDN: hss.openairinterface.org - HSS_REALM: openairinterface.org - MCC: '222' - MNC: '01' - MME_GID: 32768 - MME_CODE: 3 - TAC_0: 1 - TAC_1: 2 - TAC_2: 3 - MME_FQDN: mme.openairinterface.org - MME_S6A_IP_ADDR: 192.168.61.3 - MME_INTERFACE_NAME_FOR_S1_MME: eth0 - MME_IPV4_ADDRESS_FOR_S1_MME: 192.168.61.3 - MME_INTERFACE_NAME_FOR_S11: eth0 - MME_IPV4_ADDRESS_FOR_S11: 192.168.61.3 - MME_INTERFACE_NAME_FOR_S10: lo - MME_IPV4_ADDRESS_FOR_S10: 127.0.0.10 - OUTPUT: CONSOLE - SGW_IPV4_ADDRESS_FOR_S11_0: 192.168.61.4 - PEER_MME_IPV4_ADDRESS_FOR_S10_0: 0.0.0.0 - PEER_MME_IPV4_ADDRESS_FOR_S10_1: 0.0.0.0 - MCC_SGW_0: '222' - MNC3_SGW_0: '001' - TAC_LB_SGW_0: '01' - TAC_HB_SGW_0: '00' - MCC_MME_0: '222' - MNC3_MME_0: '001' - TAC_LB_MME_0: '02' - TAC_HB_MME_0: '00' - MCC_MME_1: '222' - MNC3_MME_1: '001' - TAC_LB_MME_1: '03' - TAC_HB_MME_1: '00' - TAC_LB_SGW_TEST_0: '03' - TAC_HB_SGW_TEST_0: '00' - SGW_IPV4_ADDRESS_FOR_S11_TEST_0: 0.0.0.0 - healthcheck: - test: /bin/bash -c "pgrep oai_mme" - interval: 10s - timeout: 5s - retries: 5 - - oai_spgwc: - image: oai-spgwc:production - privileged: true - depends_on: [oai_mme] - container_name: prod-oai-spgwc - networks: - public_net: - ipv4_address: 192.168.61.4 - environment: - PID_DIRECTORY: /var/run - SGW_INTERFACE_NAME_FOR_S11: eth0 - SGW_IP_FOR_S5_S8_CP: 127.0.0.11/8 - PGW_IP_FOR_S5_S8_CP: 127.0.0.12/8 - PGW_INTERFACE_NAME_FOR_SX: eth0 - DEFAULT_APN: oai.ipv4 - DEFAULT_DNS_IPV4_ADDRESS: 192.168.18.129 - DEFAULT_DNS_SEC_IPV4_ADDRESS: 8.8.4.4 - UE_IP_ADDRESS_POOL: '12.1.1.2 - 12.1.1.254' - PUSH_PROTOCOL_OPTION: 'yes' - healthcheck: - test: /bin/bash -c "pgrep oai_spgwc" - interval: 10s - timeout: 5s - retries: 5 - - oai_spgwu: - image: oai-spgwu-tiny:production - privileged: true - container_name: prod-oai-spgwu-tiny - depends_on: [oai_spgwc] - networks: - public_net: - ipv4_address: 192.168.61.5 - environment: - PID_DIRECTORY: /var/run - INSTANCE: 1 - SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP: eth0 - PGW_INTERFACE_NAME_FOR_SGI: eth0 - SGW_INTERFACE_NAME_FOR_SX: eth0 - SPGWC0_IP_ADDRESS: 192.168.61.4 - NETWORK_UE_IP: '12.1.1.0/24' - NETWORK_UE_NAT_OPTION: 'yes' - healthcheck: - test: /bin/bash -c "pgrep oai_spgwu" - interval: 10s - timeout: 5s - retries: 5 - - flexran_rtc: - image: flexran-rtc:production - privileged: true - container_name: prod-flexran-rtc - networks: - public_net: - ipv4_address: 192.168.61.10 - healthcheck: - test: /bin/bash -c "pgrep rt_controller" - interval: 10s - timeout: 5s - retries: 5 - - trf_gen: - image: trf-gen:production - privileged: true - container_name: prod-trf-gen - networks: - public_net: - ipv4_address: 192.168.61.11 - entrypoint: /bin/bash -c "ip route add 12.1.1.0/24 via 192.168.61.5 dev eth0; sleep infinity" - healthcheck: - test: /bin/bash -c "ping -c 2 192.168.61.5" - interval: 10s - timeout: 5s - retries: 5 - -networks: - private_net: - name: prod-oai-private-net - ipam: - config: - - subnet: 192.168.68.0/26 - public_net: - name: prod-oai-public-net - ipam: - config: - - subnet: 192.168.61.0/26 diff --git a/executables/nr-gnb.c b/executables/nr-gnb.c index ce09531e78..0e15146314 100644 --- a/executables/nr-gnb.c +++ b/executables/nr-gnb.c @@ -49,6 +49,7 @@ #include "SCHED_NR/fapi_nr_l1.h" #include "PHY/NR_TRANSPORT/nr_transport_proto.h" #include "PHY/MODULATION/nr_modulation.h" +#include "PHY/NR_TRANSPORT/nr_dlsch.h" #undef MALLOC //there are two conflicting definitions, so we better make sure we don't use it at all //#undef FRAME_LENGTH_COMPLEX_SAMPLES //there are two conflicting definitions, so we better make sure we don't use it at all @@ -114,19 +115,36 @@ time_stats_t softmodem_stats_rx_sf; // total rx time void tx_func(void *param) { - processingData_L1_t *info = (processingData_L1_t *) param; + processingData_L1tx_t *info = (processingData_L1tx_t *) param; PHY_VARS_gNB *gNB = info->gNB; - int frame_tx = info->frame_tx; - int slot_tx = info->slot_tx; + int frame_tx = info->frame; + int slot_tx = info->slot; - phy_procedures_gNB_TX(gNB, frame_tx,slot_tx, 1); + phy_procedures_gNB_TX(info, + frame_tx, + slot_tx, + 1); + info->slot = -1; + if ((frame_tx&127) == 0) dump_pdsch_stats(gNB); - // start FH TX processing - notifiedFIFO_elt_t *res; + // If the later of the 2 L1 tx thread finishes first, + // we wait for the earlier one to finish and start the RU thread + // to avoid realtime issues with USRP + + // Start RU TX processing. + notifiedFIFO_elt_t *res; res = pullTpool(gNB->resp_RU_tx, gNB->threadPool); processingData_RU_t *syncMsg = (processingData_RU_t *)NotifiedFifoData(res); + LOG_D(PHY,"waiting for previous tx to finish, next slot %d,%d\n",syncMsg->next_slot,slot_tx); + while (syncMsg->next_slot != slot_tx) { + pushNotifiedFIFO(gNB->resp_RU_tx, res); + res = pullTpool(gNB->resp_RU_tx, gNB->threadPool); + syncMsg = (processingData_RU_t *)NotifiedFifoData(res); + } + LOG_D(PHY,"previous tx finished, next slot %d,%d\n",syncMsg->next_slot,slot_tx); syncMsg->frame_tx = frame_tx; syncMsg->slot_tx = slot_tx; + syncMsg->next_slot = get_next_downlink_slot(gNB, &gNB->gNB_config, frame_tx, slot_tx); syncMsg->timestamp_tx = info->timestamp_tx; syncMsg->ru = gNB->RU_list[0]; res->key = slot_tx; @@ -201,13 +219,6 @@ void rx_func(void *param) { } up_removed++; } - for (j = 0; j < NUMBER_OF_NR_DLSCH_MAX; j++) - if (gNB->dlsch[j][0]->rnti == rnti_to_remove[i]) { - gNB->dlsch[j][0]->rnti = 0; - gNB->dlsch[j][0]->harq_mask = 0; - //clean_gNB_dlsch(gNB->dlsch[j][0]); - down_removed++; - } for (j = 0; j < NUMBER_OF_NR_PUCCH_MAX; j++) if (gNB->pucch[j]->active > 0 && gNB->pucch[j]->pucch_pdu.rnti == rnti_to_remove[i]) { @@ -255,7 +266,6 @@ void rx_func(void *param) { LOG_D(PHY,"%s() Exit proc[rx:%d%d tx:%d%d]\n", __FUNCTION__, frame_rx, slot_rx, frame_tx, slot_tx); // Call the scheduler - start_meas(&gNB->ul_indication_stats); pthread_mutex_lock(&gNB->UL_INFO_mutex); gNB->UL_INFO.frame = frame_rx; @@ -266,16 +276,17 @@ void rx_func(void *param) { pthread_mutex_unlock(&gNB->UL_INFO_mutex); stop_meas(&gNB->ul_indication_stats); - notifiedFIFO_elt_t *res; - if (tx_slot_type == NR_DOWNLINK_SLOT || tx_slot_type == NR_MIXED_SLOT) { + notifiedFIFO_elt_t *res; res = pullTpool(gNB->resp_L1_tx, gNB->threadPool); - processingData_L1_t *syncMsg = (processingData_L1_t *)NotifiedFifoData(res); + processingData_L1tx_t *syncMsg = (processingData_L1tx_t *)NotifiedFifoData(res); + while (syncMsg->slot != slot_tx) { + pushNotifiedFIFO(gNB->resp_L1_tx, res); + res = pullTpool(gNB->resp_L1_tx, gNB->threadPool); + syncMsg = (processingData_L1tx_t *)NotifiedFifoData(res); + } syncMsg->gNB = gNB; - syncMsg->frame_rx = frame_rx; - syncMsg->slot_rx = slot_rx; - syncMsg->frame_tx = frame_tx; - syncMsg->slot_tx = slot_tx; + AssertFatal(syncMsg->slot == slot_tx, "Thread message slot and logical slot number do not match\n"); syncMsg->timestamp_tx = info->timestamp_tx; res->key = slot_tx; pushTpool(gNB->threadPool, res); @@ -325,7 +336,6 @@ static void *process_stats_thread(void *param) { PHY_VARS_gNB *gNB = (PHY_VARS_gNB *)param; - reset_meas(&gNB->phy_proc_tx); reset_meas(&gNB->dlsch_encoding_stats); reset_meas(&gNB->phy_proc_rx); reset_meas(&gNB->ul_indication_stats); @@ -337,7 +347,8 @@ static void *process_stats_thread(void *param) { while(!oai_exit) { sleep(1); - print_meas(&gNB->phy_proc_tx, "L1 Tx processing", NULL, NULL); + print_meas(gNB->phy_proc_tx_0, "L1 Tx processing thread 0", NULL, NULL); + print_meas(gNB->phy_proc_tx_1, "L1 Tx processing thread 1", NULL, NULL); print_meas(&gNB->dlsch_encoding_stats, "DLSCH encoding", NULL, NULL); print_meas(&gNB->phy_proc_rx, "L1 Rx processing", NULL, NULL); print_meas(&gNB->ul_indication_stats, "UL Indication", NULL, NULL); @@ -390,14 +401,38 @@ void init_gNB_Tpool(int inst) { // L1 RX result FIFO gNB->resp_L1 = (notifiedFIFO_t*) malloc(sizeof(notifiedFIFO_t)); initNotifiedFIFO(gNB->resp_L1); + notifiedFIFO_elt_t *msg = newNotifiedFIFO_elt(sizeof(processingData_L1_t),0,gNB->resp_L1,rx_func); + pushNotifiedFIFO(gNB->resp_L1,msg); // to unblock the process in the beginning // L1 TX result FIFO gNB->resp_L1_tx = (notifiedFIFO_t*) malloc(sizeof(notifiedFIFO_t)); initNotifiedFIFO(gNB->resp_L1_tx); + // we create 2 threads for L1 tx processing + notifiedFIFO_elt_t *msgL1Tx = newNotifiedFIFO_elt(sizeof(processingData_L1tx_t),0,gNB->resp_L1_tx,tx_func); + processingData_L1tx_t *msgDataTx = (processingData_L1tx_t *)NotifiedFifoData(msgL1Tx); + init_DLSCH_struct(gNB, msgDataTx); + msgDataTx->slot = -1; + memset(msgDataTx->ssb, 0, 64*sizeof(NR_gNB_SSB_t)); + reset_meas(&msgDataTx->phy_proc_tx); + gNB->phy_proc_tx_0 = &msgDataTx->phy_proc_tx; + pushNotifiedFIFO(gNB->resp_L1_tx,msgL1Tx); // to unblock the process in the beginning + + msgL1Tx = newNotifiedFIFO_elt(sizeof(processingData_L1tx_t),0,gNB->resp_L1_tx,tx_func); + msgDataTx = (processingData_L1tx_t *)NotifiedFifoData(msgL1Tx); + init_DLSCH_struct(gNB, msgDataTx); + msgDataTx->slot = -1; + memset(msgDataTx->ssb, 0, 64*sizeof(NR_gNB_SSB_t)); + reset_meas(&msgDataTx->phy_proc_tx); + gNB->phy_proc_tx_1 = &msgDataTx->phy_proc_tx; + pushNotifiedFIFO(gNB->resp_L1_tx,msgL1Tx); // to unblock the process in the beginning // RU TX result FIFO gNB->resp_RU_tx = (notifiedFIFO_t*) malloc(sizeof(notifiedFIFO_t)); initNotifiedFIFO(gNB->resp_RU_tx); + notifiedFIFO_elt_t *msgRUTx = newNotifiedFIFO_elt(sizeof(processingData_RU_t),0,gNB->resp_RU_tx,ru_tx_func); + processingData_RU_t *msgData = (processingData_RU_t*)msgRUTx->msgData; + msgData->next_slot = sf_ahead*gNB->frame_parms.slots_per_subframe; // first Tx slot + pushNotifiedFIFO(gNB->resp_RU_tx,msgRUTx); // to unblock the process in the beginning // Stats measurement thread if(opp_enabled == 1) threadCreate(&proc->process_stats_thread, process_stats_thread,(void *)gNB, "time_meas", -1, OAI_PRIORITY_RT_LOW); diff --git a/executables/nr-ru.c b/executables/nr-ru.c index 2de04f4e7f..9bbe1b43bf 100644 --- a/executables/nr-ru.c +++ b/executables/nr-ru.c @@ -1269,14 +1269,9 @@ void *ru_thread( void *param ) { pthread_cond_signal(&RC.ru_cond); pthread_mutex_unlock(&RC.ru_mutex); wait_sync("ru_thread"); - notifiedFIFO_elt_t *msg = newNotifiedFIFO_elt(sizeof(processingData_L1_t),0,gNB->resp_L1,rx_func); - notifiedFIFO_elt_t *msgL1Tx = newNotifiedFIFO_elt(sizeof(processingData_L1_t),0,gNB->resp_L1_tx,tx_func); - notifiedFIFO_elt_t *msgRUTx = newNotifiedFIFO_elt(sizeof(processingData_L1_t),0,gNB->resp_RU_tx,ru_tx_func); + processingData_L1_t *syncMsg; notifiedFIFO_elt_t *res; - pushNotifiedFIFO(gNB->resp_L1,msg); // to unblock the process in the beginning - pushNotifiedFIFO(gNB->resp_L1_tx,msgL1Tx); // to unblock the process in the beginning - pushNotifiedFIFO(gNB->resp_RU_tx,msgRUTx); // to unblock the process in the beginning if(!emulate_rf) { // Start RF device if any @@ -1405,9 +1400,15 @@ void *ru_thread( void *param ) { else LOG_I(PHY,"RU %d rf device stopped\n",ru->idx); } - delNotifiedFIFO_elt(msg); - delNotifiedFIFO_elt(msgL1Tx); - delNotifiedFIFO_elt(msgRUTx); + res = pullNotifiedFIFO(gNB->resp_L1); + delNotifiedFIFO_elt(res); + res = pullNotifiedFIFO(gNB->resp_L1_tx); + delNotifiedFIFO_elt(res); + res = pullNotifiedFIFO(gNB->resp_L1_tx); + delNotifiedFIFO_elt(res); + res = pullNotifiedFIFO(gNB->resp_RU_tx); + delNotifiedFIFO_elt(res); + ru_thread_status = 0; return &ru_thread_status; } diff --git a/nfapi/oai_integration/nfapi_pnf.c b/nfapi/oai_integration/nfapi_pnf.c index 2b1900200a..4edbeee342 100644 --- a/nfapi/oai_integration/nfapi_pnf.c +++ b/nfapi/oai_integration/nfapi_pnf.c @@ -1104,25 +1104,70 @@ void pnf_phy_deallocate_p7_vendor_ext(nfapi_p7_message_header_t *header) { free(header); } +notifiedFIFO_elt_t *l1tx_message_extract(PHY_VARS_gNB *gNB, int frame, int slot) { + notifiedFIFO_elt_t *res; + notifiedFIFO_elt_t *freeRes = NULL; + + // check first message + res = pullTpool(gNB->resp_L1_tx, gNB->threadPool); + processingData_L1tx_t *msgTx = (processingData_L1tx_t *)NotifiedFifoData(res); + if (msgTx->slot == slot) { + return res; + } + if (msgTx->slot == -1) { + freeRes = res; + } + + // check second message + pushNotifiedFIFO(gNB->resp_L1_tx,res); + res = pullTpool(gNB->resp_L1_tx, gNB->threadPool); + msgTx = (processingData_L1tx_t *)NotifiedFifoData(res); + if (msgTx->slot == slot) { + return res; + } + if (msgTx->slot == -1) { + freeRes = res; + } + + if (freeRes) { + msgTx = (processingData_L1tx_t *)NotifiedFifoData(res); + msgTx->num_pdsch_slot=0; + msgTx->pdcch_pdu.pdcch_pdu_rel15.numDlDci = 0; + msgTx->ul_pdcch_pdu.pdcch_pdu.pdcch_pdu_rel15.numDlDci = 0; + msgTx->slot = slot; + msgTx->frame = frame; + return freeRes; + } + pushNotifiedFIFO(gNB->resp_L1_tx,res); + AssertFatal(1==0, "It means both L1 Tx messages are still waiting to be processed. This happens when L1 Tx processing is too slow. Message slot %d, scheduled slot %d\n", + msgTx->slot, slot); +} int pnf_phy_ul_dci_req(gNB_L1_rxtx_proc_t *proc, nfapi_pnf_p7_config_t *pnf_p7, nfapi_nr_ul_dci_request_t *req) { // LOG_D(PHY,"[PNF] HI_DCI0_REQUEST SFN/SF:%05d dci:%d hi:%d\n", NFAPI_SFNSF2DEC(req->sfn_sf), req->hi_dci0_request_body.number_of_dci, req->hi_dci0_request_body.number_of_hi); struct PHY_VARS_gNB_s *gNB = RC.gNB[0]; + + // extract the next available thread message (priority to message with current slot, then free message) + notifiedFIFO_elt_t *res; + res = l1tx_message_extract(gNB, req->SFN, req->Slot); + processingData_L1tx_t *msgTx = (processingData_L1tx_t *)NotifiedFifoData(res); + if (proc ==NULL) proc = &gNB->proc.L1_proc; - for (int i=0; inumPdus; i++) { - if (req->ul_dci_pdu_list[i].PDUType == 0) { - nfapi_nr_ul_dci_request_pdus_t *ul_dci_req_pdu = &req->ul_dci_pdu_list[i]; - handle_nfapi_nr_ul_dci_pdu(gNB, req->SFN, req->Slot, ul_dci_req_pdu); + if (req->numPdus > 0) { + if (req->ul_dci_pdu_list[req->numPdus-1].PDUType == 0) { // copy only the last PDU (PHY can have only one UL PDCCH pdu) + msgTx->ul_pdcch_pdu = req->ul_dci_pdu_list[req->numPdus-1]; // copy the last pdu } else { - LOG_E(PHY,"[PNF] UL_DCI_REQ sfn_slot:%d PDU[%d] - unknown pdu type:%d\n", NFAPI_SFNSLOT2DEC(req->SFN, req->Slot), i, req->ul_dci_pdu_list[i].PDUType); + LOG_E(PHY,"[PNF] UL_DCI_REQ sfn_slot:%d PDU[%d] - unknown pdu type:%d\n", NFAPI_SFNSLOT2DEC(req->SFN, req->Slot), req->numPdus-1, req->ul_dci_pdu_list[req->numPdus-1].PDUType); } } + pushNotifiedFIFO(gNB->resp_L1_tx,res); + return 0; } @@ -1193,14 +1238,17 @@ int pnf_phy_dl_tti_req(gNB_L1_rxtx_proc_t *proc, nfapi_pnf_p7_config_t *pnf_p7, for (int i=0; idl_tti_request_body.nPDUs; i++) { // NFAPI_TRACE(NFAPI_TRACE_INFO, "%s() sfn/sf:%d PDU[%d] size:%d pdcch_vars->num_dci:%d\n", __FUNCTION__, NFAPI_SFNSF2DEC(req->sfn_sf), i, dl_config_pdu_list[i].pdu_size,pdcch_vars->num_dci); + notifiedFIFO_elt_t *res; + res = l1tx_message_extract(gNB, sfn, slot); + processingData_L1tx_t *msgTx = (processingData_L1tx_t *)NotifiedFifoData(res); if (dl_tti_pdu_list[i].PDUType == NFAPI_NR_DL_TTI_PDCCH_PDU_TYPE) { - nfapi_nr_dl_tti_request_pdu_t *dl_tti_pdu=&dl_tti_pdu_list[i]; - handle_nfapi_nr_pdcch_pdu(gNB, sfn, slot, &dl_tti_pdu->pdcch_pdu); + // we trust the scheduler sends only one PDCCH PDU per slot + msgTx->pdcch_pdu = dl_tti_pdu_list[i].pdcch_pdu; // fills the last received PDCCH PDU } else if (dl_tti_pdu_list[i].PDUType == NFAPI_NR_DL_TTI_SSB_PDU_TYPE) { //NFAPI_TRACE(NFAPI_TRACE_INFO, "%s() PDU:%d BCH: pdu_index:%u pdu_length:%d sdu_length:%d BCH_SDU:%x,%x,%x\n", __FUNCTION__, i, pdu_index, bch_pdu->bch_pdu_rel8.length, tx_request_pdu[sfn][sf][pdu_index]->segments[0].segment_length, sdu[0], sdu[1], sdu[2]); - handle_nr_nfapi_ssb_pdu(gNB, sfn, slot, &dl_tti_pdu_list[i]); + handle_nr_nfapi_ssb_pdu(msgTx, sfn, slot, &dl_tti_pdu_list[i]); gNB->pbch_configured=1; } else if (dl_tti_pdu_list[i].PDUType == NFAPI_NR_DL_TTI_PDSCH_PDU_TYPE) { @@ -1209,21 +1257,11 @@ int pnf_phy_dl_tti_req(gNB_L1_rxtx_proc_t *proc, nfapi_pnf_p7_config_t *pnf_p7, nfapi_nr_pdu_t *tx_data = tx_data_request[sfn][slot][rel15_pdu->pduIndex]; if (tx_data != NULL) { - int UE_id = find_nr_dlsch(rel15_pdu->rnti,gNB,SEARCH_EXIST_OR_FREE); - AssertFatal(UE_id!=-1,"no free or exiting dlsch_context\n"); - AssertFatal(UE_id= %d(NUMBER_OF_UE_MAX)\n",UE_id,NUMBER_OF_UE_MAX); - NR_gNB_DLSCH_t *dlsch0 = gNB->dlsch[UE_id][0]; - int harq_pid = dlsch0->harq_ids[sfn%2][slot]; - - if(harq_pid >= dlsch0->Mdlharq) { - LOG_E(PHY,"pnf_phy_dl_config_req illegal harq_pid %d\n", harq_pid); - return(-1); - } - - uint8_t *dlsch_sdu = nr_tx_pdus[UE_id][harq_pid]; - memcpy(dlsch_sdu, tx_data->TLVs[0].value.direct,tx_data->PDU_length); + uint8_t *dlsch_sdu = (uint8_t *)tx_data->TLVs[0].value.direct; //NFAPI_TRACE(NFAPI_TRACE_INFO, "%s() DLSCH:pdu_index:%d handle_nfapi_dlsch_pdu(eNB, proc_rxtx, dlsch_pdu, transport_blocks:%d sdu:%p) eNB->pdcch_vars[proc->subframe_tx & 1].num_pdcch_symbols:%d\n", __FUNCTION__, rel8_pdu->pdu_index, rel8_pdu->transport_blocks, dlsch_sdu, eNB->pdcch_vars[proc->subframe_tx & 1].num_pdcch_symbols); - handle_nr_nfapi_pdsch_pdu(gNB, sfn, slot,pdsch_pdu, dlsch_sdu); + AssertFatal(msgTx->num_pdsch_slot < gNB->number_of_nr_dlsch_max,"Number of PDSCH PDUs %d exceeded the limit %d\n", + msgTx->num_pdsch_slot,gNB->number_of_nr_dlsch_max); + handle_nr_nfapi_pdsch_pdu(msgTx, pdsch_pdu, dlsch_sdu); } else { NFAPI_TRACE(NFAPI_TRACE_ERROR, "%s() DLSCH NULL TX PDU SFN/SF:%d PDU_INDEX:%d\n", __FUNCTION__, NFAPI_SFNSLOT2DEC(sfn,slot), rel15_pdu->pduIndex); @@ -1231,11 +1269,12 @@ int pnf_phy_dl_tti_req(gNB_L1_rxtx_proc_t *proc, nfapi_pnf_p7_config_t *pnf_p7, } else if (dl_tti_pdu_list[i].PDUType == NFAPI_NR_DL_TTI_CSI_RS_PDU_TYPE) { nfapi_nr_dl_tti_csi_rs_pdu *csi_rs_pdu = &dl_tti_pdu_list[i].csi_rs_pdu; - handle_nfapi_nr_csirs_pdu(gNB, sfn, slot, csi_rs_pdu); + handle_nfapi_nr_csirs_pdu(msgTx, sfn, slot, csi_rs_pdu); } else { NFAPI_TRACE(NFAPI_TRACE_ERROR, "%s() UNKNOWN:%d\n", __FUNCTION__, dl_tti_pdu_list[i].PDUType); } + pushNotifiedFIFO(gNB->resp_L1_tx,res); } if(req->vendor_extension) diff --git a/openair1/PHY/INIT/nr_init.c b/openair1/PHY/INIT/nr_init.c index 32e190679d..e2b493ec7f 100644 --- a/openair1/PHY/INIT/nr_init.c +++ b/openair1/PHY/INIT/nr_init.c @@ -518,45 +518,38 @@ void nr_phy_config_request(NR_PHY_Config_t *phy_config) { LOG_I(PHY,"gNB %d configured\n",Mod_id); } - -void init_nr_transport(PHY_VARS_gNB *gNB) { - int i; - int j; +void init_DLSCH_struct(PHY_VARS_gNB *gNB, processingData_L1tx_t *msg) { NR_DL_FRAME_PARMS *fp = &gNB->frame_parms; nfapi_nr_config_request_scf_t *cfg = &gNB->gNB_config; - LOG_I(PHY, "Initialise nr transport\n"); uint16_t grid_size = cfg->carrier_config.dl_grid_size[fp->numerology_index].value; + msg->num_pdsch_slot = 0; + + for (int i=0; inumber_of_nr_dlsch_max; i++) { + LOG_I(PHY,"Allocating Transport Channel Buffers for DLSCH %d/%d\n",i,gNB->number_of_nr_dlsch_max); + for (int j=0; j<2; j++) { + msg->dlsch[i][j] = new_gNB_dlsch(fp,1,16,NSOFT,0,grid_size); + AssertFatal(msg->dlsch[i][j]!=NULL,"Can't initialize dlsch %d \n", i); + } + } +} + +void init_nr_transport(PHY_VARS_gNB *gNB) { + NR_DL_FRAME_PARMS *fp = &gNB->frame_parms; + LOG_I(PHY, "Initialise nr transport\n"); memset(gNB->num_pdsch_rnti, 0, sizeof(uint16_t)*80); - for (i=0; i pdcch_pdu[i].frame=-1; - LOG_I(PHY,"Initializing UL PDCCH list for UL PDCCH %d/%d\n",i,NUMBER_OF_NR_PDCCH_MAX); - gNB->ul_pdcch_pdu[i].frame=-1; - } - - for (i=0; ipucch[i] = new_gNB_pucch(); AssertFatal(gNB->pucch[i]!=NULL,"Can't initialize pucch %d \n", i); } - for (i=0; inumber_of_nr_dlsch_max; i++) { - - LOG_I(PHY,"Allocating Transport Channel Buffers for DLSCH %d/%d\n",i,gNB->number_of_nr_dlsch_max); - - for (j=0; j<2; j++) { - gNB->dlsch[i][j] = new_gNB_dlsch(fp,1,16,NSOFT,0,grid_size); - AssertFatal(gNB->dlsch[i][j]!=NULL,"Can't initialize dlsch %d \n", i); - } - } - - for (i=0; inumber_of_nr_ulsch_max; i++) { + for (int i=0; inumber_of_nr_ulsch_max; i++) { LOG_I(PHY,"Allocating Transport Channel Buffer for ULSCH %d/%d\n",i,gNB->number_of_nr_ulsch_max); - for (j=0; j<2; j++) { + for (int j=0; j<2; j++) { // ULSCH for data gNB->ulsch[i][j] = new_gNB_ulsch(MAX_LDPC_ITERATIONS, fp->N_RB_UL, 0); diff --git a/openair1/PHY/INIT/phy_init.h b/openair1/PHY/INIT/phy_init.h index 85101a3080..dd9232de83 100644 --- a/openair1/PHY/INIT/phy_init.h +++ b/openair1/PHY/INIT/phy_init.h @@ -409,6 +409,7 @@ void init_nr_transport(PHY_VARS_gNB *gNB); void init_dfts(void); void fill_subframe_mask(PHY_VARS_eNB *eNB); +void init_DLSCH_struct(PHY_VARS_gNB *gNB, processingData_L1tx_t *msg); /** @} */ #endif diff --git a/openair1/PHY/NR_ESTIMATION/nr_measurements_gNB.c b/openair1/PHY/NR_ESTIMATION/nr_measurements_gNB.c index 57470cf988..b272c2025a 100644 --- a/openair1/PHY/NR_ESTIMATION/nr_measurements_gNB.c +++ b/openair1/PHY/NR_ESTIMATION/nr_measurements_gNB.c @@ -73,8 +73,9 @@ void dump_nr_I0_stats(FILE *fd,PHY_VARS_gNB *gNB) { int min_I0=1000,max_I0=0; int amin=0,amax=0; + fprintf(fd,"Blacklisted PRBs %d/%d\n",gNB->num_ulprbbl,gNB->frame_parms.N_RB_UL); for (int i=0; iframe_parms.N_RB_UL; i++) { - if (i==(gNB->frame_parms.N_RB_UL>>1) - 1) i+=2; + if (gNB->ulprbbl[i] > 0) continue; if (gNB->measurements.n0_subband_power_tot_dB[i]measurements.n0_subband_power_tot_dB[i]; amin=i;} @@ -82,7 +83,8 @@ void dump_nr_I0_stats(FILE *fd,PHY_VARS_gNB *gNB) { } for (int i=0; iframe_parms.N_RB_UL; i++) { - fprintf(fd,"%2d.",gNB->measurements.n0_subband_power_tot_dB[i]-gNB->measurements.n0_subband_power_avg_dB); + if (gNB->ulprbbl[i] ==0) fprintf(fd,"%2d.",gNB->measurements.n0_subband_power_tot_dB[i]-gNB->measurements.n0_subband_power_avg_dB); + else fprintf(fd," X."); if (i%25 == 24) fprintf(fd,"\n"); } diff --git a/openair1/PHY/NR_TRANSPORT/nr_dci.c b/openair1/PHY/NR_TRANSPORT/nr_dci.c index 54e6b2ac79..13c2f5ce4d 100644 --- a/openair1/PHY/NR_TRANSPORT/nr_dci.c +++ b/openair1/PHY/NR_TRANSPORT/nr_dci.c @@ -132,8 +132,8 @@ void nr_generate_dci(PHY_VARS_gNB *gNB, dci_pdu->AggregationLevel, 0,NULL); polar_encoder_fast((uint64_t*)dci_pdu->Payload, (void*)encoder_output, n_RNTI,1,currentPtr); -#ifdef DEBUG_CHANNEL_CODING - printf("polar rnti %x,length %d, L %d\n",n_RNTI, dci_pdu->PayloadSizeBits,pdcch_pdu_rel15->dci_pdu.AggregationLevel[d]); +#if DEBUG_CHANNEL_CODING + printf("polar rnti %x,length %d, L %d\n",n_RNTI, dci_pdu->PayloadSizeBits,dci_pdu->AggregationLevel); printf("DCI PDU: [0]->0x%lx \t [1]->0x%lx\n", ((uint64_t*)dci_pdu->Payload)[0], ((uint64_t*)dci_pdu->Payload)[1]); printf("Encoded Payload (length:%d dwords):\n", encoded_length>>5); diff --git a/openair1/PHY/NR_TRANSPORT/nr_dci_tools.c b/openair1/PHY/NR_TRANSPORT/nr_dci_tools.c index c562dfaa41..770c35105f 100644 --- a/openair1/PHY/NR_TRANSPORT/nr_dci_tools.c +++ b/openair1/PHY/NR_TRANSPORT/nr_dci_tools.c @@ -202,107 +202,3 @@ void nr_fill_cce_list(PHY_VARS_gNB *gNB, uint8_t m, nfapi_nr_dl_tti_pdcch_pdu_r ret |= ((field>>i)&1)<<(size-i-1); return ret; }*/ -int16_t find_nr_pdcch(int frame,int slot, PHY_VARS_gNB *gNB,find_type_t type) { - - uint16_t i; - int16_t first_free_index=-1; - - AssertFatal(gNB!=NULL,"gNB is null\n"); - for (i=0; ipdcch_pdu[i].frame,gNB->pdcch_pdu[i].slot,first_free_index); - if ((gNB->pdcch_pdu[i].frame == frame) && - (gNB->pdcch_pdu[i].slot==slot)) return i; - else if ( gNB->pdcch_pdu[i].frame==-1 && first_free_index==-1) first_free_index=i; - } - if (type == SEARCH_EXIST) return -1; - - return first_free_index; -} - - -void nr_fill_dci(PHY_VARS_gNB *gNB, - int frame, - int slot, - nfapi_nr_dl_tti_pdcch_pdu *pdcch_pdu) { - - nfapi_nr_dl_tti_pdcch_pdu_rel15_t *pdcch_pdu_rel15 = &pdcch_pdu->pdcch_pdu_rel15; - NR_gNB_DLSCH_t *dlsch; - - int pdcch_id = find_nr_pdcch(frame,slot,gNB,SEARCH_EXIST_OR_FREE); - AssertFatal(pdcch_id>=0 && pdcch_idpdcch_pdu[pdcch_id].pdcch_pdu,(void*)pdcch_pdu,sizeof(*pdcch_pdu)); - gNB->pdcch_pdu[pdcch_id].frame = frame; - gNB->pdcch_pdu[pdcch_id].slot = slot; - - for (int i=0;inumDlDci;i++) { - - //uint64_t *dci_pdu = (uint64_t*)pdcch_pdu_rel15->dci_pdu[i].Payload; - - int dlsch_id = find_nr_dlsch(pdcch_pdu_rel15->dci_pdu[i].RNTI,gNB,SEARCH_EXIST_OR_FREE); - if( (dlsch_id<0) || (dlsch_id>=gNB->number_of_nr_dlsch_max) ){ - LOG_E(PHY,"illegal dlsch_id found!!! rnti %04x dlsch_id %d\n",(unsigned int)pdcch_pdu_rel15->dci_pdu[i].RNTI,dlsch_id); - return; - } - - dlsch = gNB->dlsch[dlsch_id][0]; - int harq_pid = 0; - - dlsch->slot_tx[slot] = 1; - dlsch->harq_ids[frame % 2][slot] = 0; - AssertFatal(harq_pid < 8 && harq_pid >= 0, - "illegal harq_pid %d\n",harq_pid); - - dlsch->harq_mask |= (1<rnti = pdcch_pdu_rel15->dci_pdu[i].RNTI; - - // nr_fill_cce_list(gNB,0); - } - -} - - -int16_t find_nr_ul_dci(int frame,int slot, PHY_VARS_gNB *gNB,find_type_t type) { - - uint16_t i; - int16_t first_free_index=-1; - - AssertFatal(gNB!=NULL,"gNB is null\n"); - for (i=0; iul_pdcch_pdu[i].frame,gNB->ul_pdcch_pdu[i].slot,first_free_index); - if ((gNB->ul_pdcch_pdu[i].frame == frame) && - (gNB->ul_pdcch_pdu[i].slot==slot)) return i; - else if (gNB->ul_pdcch_pdu[i].frame==-1 && first_free_index==-1) first_free_index=i; - } - if (type == SEARCH_EXIST) return -1; - - return first_free_index; -} - - -void nr_fill_ul_dci(PHY_VARS_gNB *gNB, - int frame, - int slot, - nfapi_nr_ul_dci_request_pdus_t *pdcch_pdu) { - - nfapi_nr_dl_tti_pdcch_pdu_rel15_t *pdcch_pdu_rel15 = &pdcch_pdu->pdcch_pdu.pdcch_pdu_rel15; - - int pdcch_id = find_nr_ul_dci(frame,slot,gNB,SEARCH_EXIST_OR_FREE); - AssertFatal(pdcch_id>=0 && pdcch_idul_pdcch_pdu[pdcch_id].pdcch_pdu,(void*)pdcch_pdu,sizeof(*pdcch_pdu)); - gNB->ul_pdcch_pdu[pdcch_id].frame = frame; - gNB->ul_pdcch_pdu[pdcch_id].slot = slot; - - for (int i=0;inumDlDci;i++) { - - //uint64_t *dci_pdu = (uint64_t*)pdcch_pdu_rel15->dci_pdu[i].Payload; - - // if there's no DL DCI then generate CCE list - // nr_fill_cce_list(gNB,0); - /* - LOG_D(PHY, "DCI PDU: [0]->0x%lx \t [1]->0x%lx \n",dci_pdu[0], dci_pdu[1]); - LOG_D(PHY, "DCI type %d payload (size %d) generated on candidate %d\n", dci_alloc->pdcch_params.dci_format, dci_alloc->size, cand_idx); - */ - - } - -} diff --git a/openair1/PHY/NR_TRANSPORT/nr_dlsch.c b/openair1/PHY/NR_TRANSPORT/nr_dlsch.c index 9dcb8e2c6d..2ff4c058c6 100644 --- a/openair1/PHY/NR_TRANSPORT/nr_dlsch.c +++ b/openair1/PHY/NR_TRANSPORT/nr_dlsch.c @@ -112,10 +112,11 @@ void nr_pdsch_codeword_scrambling_optim(uint8_t *in, } -uint8_t nr_generate_pdsch(PHY_VARS_gNB *gNB, +uint8_t nr_generate_pdsch(processingData_L1tx_t *msgTx, int frame, int slot) { + PHY_VARS_gNB *gNB = msgTx->gNB; NR_gNB_DLSCH_t *dlsch; uint32_t ***pdsch_dmrs = gNB->nr_gold_pdsch_dmrs[slot]; int32_t** txdataF = gNB->common_vars.txdataF; @@ -133,9 +134,8 @@ uint8_t nr_generate_pdsch(PHY_VARS_gNB *gNB, time_stats_t *dlsch_interleaving_stats=&gNB->dlsch_interleaving_stats; time_stats_t *dlsch_segmentation_stats=&gNB->dlsch_segmentation_stats; - for (int dlsch_id=0;dlsch_idnumber_of_nr_dlsch_max;dlsch_id++) { - dlsch = gNB->dlsch[dlsch_id][0]; - if (dlsch->slot_tx[slot] == 0) continue; + for (int dlsch_id=0; dlsch_idnum_pdsch_slot; dlsch_id++) { + dlsch = msgTx->dlsch[dlsch_id][0]; NR_DL_gNB_HARQ_t *harq = &dlsch->harq_process; nfapi_nr_dl_tti_pdsch_pdu_rel15_t *rel15 = &harq->pdsch_pdu.pdsch_pdu_rel15; diff --git a/openair1/PHY/NR_TRANSPORT/nr_dlsch.h b/openair1/PHY/NR_TRANSPORT/nr_dlsch.h index 6af8f28eac..f773b99548 100644 --- a/openair1/PHY/NR_TRANSPORT/nr_dlsch.h +++ b/openair1/PHY/NR_TRANSPORT/nr_dlsch.h @@ -63,13 +63,11 @@ void nr_pdsch_codeword_scrambling(uint8_t *in, uint32_t n_RNTI, uint32_t* out); -void nr_fill_dlsch(PHY_VARS_gNB *gNB, - int frame, - int slot, +void nr_fill_dlsch(processingData_L1tx_t *msgTx, nfapi_nr_dl_tti_pdsch_pdu *pdsch_pdu, unsigned char *sdu); -uint8_t nr_generate_pdsch(PHY_VARS_gNB *gNB, +uint8_t nr_generate_pdsch(processingData_L1tx_t *msgTx, int frame, int slot); void free_gNB_dlsch(NR_gNB_DLSCH_t **dlschptr, uint16_t N_RB); diff --git a/openair1/PHY/NR_TRANSPORT/nr_dlsch_tools.c b/openair1/PHY/NR_TRANSPORT/nr_dlsch_tools.c index 543002827d..3ba13d2f44 100644 --- a/openair1/PHY/NR_TRANSPORT/nr_dlsch_tools.c +++ b/openair1/PHY/NR_TRANSPORT/nr_dlsch_tools.c @@ -254,48 +254,16 @@ void nr_emulate_dlsch_payload(uint8_t* pdu, uint16_t size) { *(pdu+i) = (uint8_t)rand(); } -int16_t find_nr_dlsch(uint16_t rnti, PHY_VARS_gNB *gNB,find_type_t type) { - - uint16_t i; - int16_t first_free_index=-1; - - AssertFatal(gNB!=NULL,"gNB is null\n"); - for (i=0; inumber_of_nr_dlsch_max; i++) { - AssertFatal(gNB->dlsch[i]!=NULL,"gNB->dlsch[%d] is null\n",i); - AssertFatal(gNB->dlsch[i][0]!=NULL,"gNB->dlsch[%d][0] is null\n",i); - LOG_D(PHY,"searching for rnti %x : dlsch_index %d=> harq_mask %x, rnti %x, first_free_index %d\n", rnti,i, - gNB->dlsch[i][0]->harq_mask,gNB->dlsch[i][0]->rnti,first_free_index); - if ((gNB->dlsch[i][0]->harq_mask >0) && - (gNB->dlsch[i][0]->rnti==rnti)) return i; - else if ((gNB->dlsch[i][0]->harq_mask == 0) && (first_free_index==-1)) first_free_index=i; - } - if (type == SEARCH_EXIST) return -1; - if (first_free_index != -1) - gNB->dlsch[first_free_index][0]->rnti = 0; - return first_free_index; - -} - - -void nr_fill_dlsch(PHY_VARS_gNB *gNB, - int frame, - int slot, +void nr_fill_dlsch(processingData_L1tx_t *msgTx, nfapi_nr_dl_tti_pdsch_pdu *pdsch_pdu, uint8_t *sdu) { - nfapi_nr_dl_tti_pdsch_pdu_rel15_t *rel15 = &pdsch_pdu->pdsch_pdu_rel15; - - int dlsch_id = find_nr_dlsch(rel15->rnti,gNB,SEARCH_EXIST); - AssertFatal( (dlsch_id>=0) && (dlsch_idnumber_of_nr_dlsch_max), - "illegal or no dlsch_id found!!! rnti %04x dlsch_id %d\n",rel15->rnti,dlsch_id); - NR_gNB_DLSCH_t *dlsch = gNB->dlsch[dlsch_id][0]; + NR_gNB_DLSCH_t *dlsch = msgTx->dlsch[msgTx->num_pdsch_slot][0]; NR_DL_gNB_HARQ_t *harq = &dlsch->harq_process; /// DLSCH struct memcpy((void*)&harq->pdsch_pdu, (void*)pdsch_pdu, sizeof(nfapi_nr_dl_tti_pdsch_pdu)); - gNB->num_pdsch_rnti[slot]++; + msgTx->num_pdsch_slot++; AssertFatal(sdu!=NULL,"sdu is null\n"); harq->pdu = sdu; - - } diff --git a/openair1/PHY/NR_TRANSPORT/nr_ulsch_decoding.c b/openair1/PHY/NR_TRANSPORT/nr_ulsch_decoding.c index 0d7746e196..8f3e766a12 100644 --- a/openair1/PHY/NR_TRANSPORT/nr_ulsch_decoding.c +++ b/openair1/PHY/NR_TRANSPORT/nr_ulsch_decoding.c @@ -308,8 +308,8 @@ void nr_processULSegment(void* arg) { int max_ldpc_iterations = p_decoderParms->numMaxIter; int8_t llrProcBuf[OAI_UL_LDPC_MAX_NUM_LLR] __attribute__ ((aligned(32))); - int16_t z [68*384]; - int8_t l [68*384]; + int16_t z [68*384 + 16] __attribute__ ((aligned(16))); + int8_t l [68*384 + 16] __attribute__ ((aligned(16))); __m128i *pv = (__m128i*)&z; __m128i *pl = (__m128i*)&l; diff --git a/openair1/PHY/defs_RU.h b/openair1/PHY/defs_RU.h index 66cb51adc6..76dd92ef5d 100644 --- a/openair1/PHY/defs_RU.h +++ b/openair1/PHY/defs_RU.h @@ -762,6 +762,7 @@ typedef struct RRU_config_s { typedef struct processingData_RU { int frame_tx; int slot_tx; + int next_slot; openair0_timestamp timestamp_tx; RU_t *ru; } processingData_RU_t; diff --git a/openair1/PHY/defs_gNB.h b/openair1/PHY/defs_gNB.h index 778724218f..3ff6050723 100644 --- a/openair1/PHY/defs_gNB.h +++ b/openair1/PHY/defs_gNB.h @@ -122,8 +122,6 @@ typedef struct { typedef struct { uint8_t active; - int frame; - int slot; nfapi_nr_dl_tti_csi_rs_pdu csirs_pdu; } NR_gNB_CSIRS_t; @@ -759,7 +757,6 @@ typedef struct PHY_VARS_gNB_s { // nfapi_nr_dl_tti_pdcch_pdu *pdcch_pdu; // nfapi_nr_ul_dci_request_pdus_t *ul_dci_pdu; uint16_t num_pdsch_rnti[80]; - NR_gNB_SSB_t ssb[64]; NR_gNB_PBCH pbch; nr_cce_t cce_list[MAX_DCI_CORESET][NR_MAX_PDCCH_AGG_LEVEL]; NR_gNB_COMMON common_vars; @@ -767,7 +764,6 @@ typedef struct PHY_VARS_gNB_s { NR_gNB_PUSCH *pusch_vars[NUMBER_OF_NR_ULSCH_MAX]; NR_gNB_PUCCH_t *pucch[NUMBER_OF_NR_PUCCH_MAX]; NR_gNB_PDCCH_t pdcch_pdu[NUMBER_OF_NR_PDCCH_MAX]; - NR_gNB_CSIRS_t csirs_pdu[NUMBER_OF_NR_CSIRS_MAX]; NR_gNB_UL_PDCCH_t ul_pdcch_pdu[NUMBER_OF_NR_PDCCH_MAX]; NR_gNB_DLSCH_t *dlsch[NUMBER_OF_NR_DLSCH_MAX][2]; // Nusers times two spatial streams NR_gNB_ULSCH_t *ulsch[NUMBER_OF_NR_ULSCH_MAX][2]; // [Nusers times][2 codewords] @@ -851,10 +847,13 @@ typedef struct PHY_VARS_gNB_s { int pusch_thres; int prach_thres; uint64_t bad_pucch; + int num_ulprbbl; + int ulprbbl[275]; /* time_stats_t phy_proc; */ - time_stats_t phy_proc_tx; + time_stats_t *phy_proc_tx_0; + time_stats_t *phy_proc_tx_1; time_stats_t phy_proc_rx; time_stats_t rx_prach; /* @@ -946,4 +945,24 @@ typedef struct processingData_L1 { PHY_VARS_gNB *gNB; } processingData_L1_t; +typedef enum { + FILLED, + FILLING, + NOT_FILLED +} msgStatus_t; + +typedef struct processingData_L1tx { + int frame; + int slot; + openair0_timestamp timestamp_tx; + PHY_VARS_gNB *gNB; + nfapi_nr_dl_tti_pdcch_pdu pdcch_pdu; + nfapi_nr_ul_dci_request_pdus_t ul_pdcch_pdu; + NR_gNB_CSIRS_t csirs_pdu[NUMBER_OF_NR_CSIRS_MAX]; + NR_gNB_DLSCH_t *dlsch[NUMBER_OF_NR_DLSCH_MAX][2]; + NR_gNB_SSB_t ssb[64]; + uint16_t num_pdsch_slot; + time_stats_t phy_proc_tx; +} processingData_L1tx_t; + #endif diff --git a/openair1/SCHED/nfapi_lte_dummy.c b/openair1/SCHED/nfapi_lte_dummy.c index 7d1e7e7684..4e82c3ecb3 100644 --- a/openair1/SCHED/nfapi_lte_dummy.c +++ b/openair1/SCHED/nfapi_lte_dummy.c @@ -13,11 +13,11 @@ void handle_nr_nfapi_ssb_pdu(PHY_VARS_gNB *gNB,int frame,int slot, nfapi_nr_dl_tti_request_pdu_t *dl_tti_pdu){} int16_t find_nr_dlsch(uint16_t rnti, PHY_VARS_gNB *gNB,find_type_t type){return 0;} -void handle_nr_nfapi_pdsch_pdu(PHY_VARS_gNB *gNB,int frame,int slot, - nfapi_nr_dl_tti_pdsch_pdu *pdsch_pdu, +void handle_nr_nfapi_pdsch_pdu(processingData_L1tx_t *msgTx, + nfapi_nr_dl_tti_pdsch_pdu *pdsch_pdu, uint8_t *sdu){ - } -void handle_nfapi_nr_csirs_pdu(PHY_VARS_gNB *gNB, +} +void handle_nfapi_nr_csirs_pdu(processingData_L1tx_t *msgTx, int frame, int slot, nfapi_nr_dl_tti_csi_rs_pdu *csirs_pdu){ } @@ -51,4 +51,5 @@ void nr_phy_config_request(NR_PHY_Config_t *gNB){} void install_nr_schedule_handlers(NR_IF_Module_t *if_inst){} -void nr_dump_frame_parms(NR_DL_FRAME_PARMS *fp){} \ No newline at end of file +void nr_dump_frame_parms(NR_DL_FRAME_PARMS *fp){} + diff --git a/openair1/SCHED/nfapi_nr_dummy.c b/openair1/SCHED/nfapi_nr_dummy.c index 1286a4e48a..511911723f 100644 --- a/openair1/SCHED/nfapi_nr_dummy.c +++ b/openair1/SCHED/nfapi_nr_dummy.c @@ -13,11 +13,11 @@ void handle_nr_nfapi_ssb_pdu(PHY_VARS_gNB *gNB,int frame,int slot, nfapi_nr_dl_tti_request_pdu_t *dl_tti_pdu){} int16_t find_nr_dlsch(uint16_t rnti, PHY_VARS_gNB *gNB,find_type_t type){return 0;} -void handle_nr_nfapi_pdsch_pdu(PHY_VARS_gNB *gNB,int frame,int slot, - nfapi_nr_dl_tti_pdsch_pdu *pdsch_pdu, +void handle_nr_nfapi_pdsch_pdu(processingData_L1tx_t *msgTx, + nfapi_nr_dl_tti_pdsch_pdu *pdsch_pdu, uint8_t *sdu){ - } -void handle_nfapi_nr_csirs_pdu(PHY_VARS_gNB *gNB, +} +void handle_nfapi_nr_csirs_pdu(processingData_L1tx_t *msgTx, int frame, int slot, nfapi_nr_dl_tti_csi_rs_pdu *csirs_pdu){ } @@ -53,4 +53,3 @@ void install_nr_schedule_handlers(NR_IF_Module_t *if_inst){} //void nr_dump_frame_parms(NR_DL_FRAME_PARMS *fp){} - \ No newline at end of file diff --git a/openair1/SCHED_NR/fapi_nr_l1.c b/openair1/SCHED_NR/fapi_nr_l1.c index fa762fa5b8..e37248e96f 100644 --- a/openair1/SCHED_NR/fapi_nr_l1.c +++ b/openair1/SCHED_NR/fapi_nr_l1.c @@ -43,7 +43,7 @@ extern int oai_nfapi_ul_tti_req(nfapi_nr_ul_tti_request_t *ul_tti_req); extern uint8_t nfapi_mode; -void handle_nr_nfapi_ssb_pdu(PHY_VARS_gNB *gNB,int frame,int slot, +void handle_nr_nfapi_ssb_pdu(processingData_L1tx_t *msgTx,int frame,int slot, nfapi_nr_dl_tti_request_pdu_t *dl_tti_pdu) { @@ -53,11 +53,11 @@ void handle_nr_nfapi_ssb_pdu(PHY_VARS_gNB *gNB,int frame,int slot, uint8_t i_ssb = dl_tti_pdu->ssb_pdu.ssb_pdu_rel15.SsbBlockIndex; LOG_D(PHY,"%d.%d : ssb index %d pbch_pdu: %x\n",frame,slot,i_ssb,dl_tti_pdu->ssb_pdu.ssb_pdu_rel15.bchPayload); - if (gNB->ssb[i_ssb].active) + if (msgTx->ssb[i_ssb].active) AssertFatal(1==0,"SSB PDU with index %d already active\n",i_ssb); else { - gNB->ssb[i_ssb].active = true; - memcpy((void*)&gNB->ssb[i_ssb].ssb_pdu,&dl_tti_pdu->ssb_pdu,sizeof(dl_tti_pdu->ssb_pdu)); + msgTx->ssb[i_ssb].active = true; + memcpy((void*)&msgTx->ssb[i_ssb].ssb_pdu,&dl_tti_pdu->ssb_pdu,sizeof(dl_tti_pdu->ssb_pdu)); } } @@ -100,46 +100,16 @@ void handle_nr_nfapi_ssb_pdu(PHY_VARS_gNB *gNB,int frame,int slot, }*/ -void handle_nfapi_nr_pdcch_pdu(PHY_VARS_gNB *gNB, - int frame, int slot, - nfapi_nr_dl_tti_pdcch_pdu *pdcch_pdu) { - - LOG_D(PHY,"Frame %d, Slot %d: DCI processing - proc:slot_tx:%d pdcch_pdu_rel15->numDlDci:%d\n",frame,slot, slot, pdcch_pdu->pdcch_pdu_rel15.numDlDci); - - // copy dci configuration into gNB structure - // gNB->pdcch_pdu = pdcch_pdu; - - nr_fill_dci(gNB,frame,slot,pdcch_pdu); - -} - - -void handle_nfapi_nr_ul_dci_pdu(PHY_VARS_gNB *gNB, - int frame, int slot, - nfapi_nr_ul_dci_request_pdus_t *ul_dci_request_pdu) { - - LOG_D(PHY,"Frame %d, Slot %d: UL DCI processing - proc:slot_tx:%d pdcch_pdu_rel15->numDlDci:%d\n",frame,slot, slot, ul_dci_request_pdu->pdcch_pdu.pdcch_pdu_rel15.numDlDci); - - // copy dci configuration into gNB structure - // gNB->ul_dci_pdu = ul_dci_request_pdu; - - nr_fill_ul_dci(gNB,frame,slot,ul_dci_request_pdu); - -} - - -void handle_nfapi_nr_csirs_pdu(PHY_VARS_gNB *gNB, - int frame, int slot, +void handle_nfapi_nr_csirs_pdu(processingData_L1tx_t *msgTx, + int frame,int slot, nfapi_nr_dl_tti_csi_rs_pdu *csirs_pdu) { int found = 0; for (int id=0; idcsirs_pdu[id]; + NR_gNB_CSIRS_t *csirs = &msgTx->csirs_pdu[id]; if (csirs->active == 0) { LOG_D(PHY,"Frame %d Slot %d CSI_RS with ID %d is now active\n",frame,slot,id); - csirs->frame = frame; - csirs->slot = slot; csirs->active = 1; memcpy((void*)&csirs->csirs_pdu, (void*)csirs_pdu, sizeof(nfapi_nr_dl_tti_csi_rs_pdu)); found = 1; @@ -151,13 +121,13 @@ void handle_nfapi_nr_csirs_pdu(PHY_VARS_gNB *gNB, } -void handle_nr_nfapi_pdsch_pdu(PHY_VARS_gNB *gNB,int frame,int slot, +void handle_nr_nfapi_pdsch_pdu(processingData_L1tx_t *msgTx, nfapi_nr_dl_tti_pdsch_pdu *pdsch_pdu, uint8_t *sdu) { - nr_fill_dlsch(gNB,frame,slot,pdsch_pdu,sdu); + nr_fill_dlsch(msgTx,pdsch_pdu,sdu); } @@ -178,12 +148,16 @@ void nr_schedule_response(NR_Sched_Rsp_t *Sched_INFO){ gNB = RC.gNB[Mod_id]; + notifiedFIFO_elt_t *res; + res = pullTpool(gNB->resp_L1_tx, gNB->threadPool); + processingData_L1tx_t *msgTx = (processingData_L1tx_t *)NotifiedFifoData(res); + uint8_t number_dl_pdu = (DL_req==NULL) ? 0 : DL_req->dl_tti_request_body.nPDUs; uint8_t number_ul_dci_pdu = (UL_dci_req==NULL) ? 0 : UL_dci_req->numPdus; uint8_t number_ul_tti_pdu = (UL_tti_req==NULL) ? 0 : UL_tti_req->n_pdus; uint8_t number_tx_data_pdu = (TX_req == NULL) ? 0 : TX_req->Number_of_PDUs; - if (NFAPI_MODE == NFAPI_MONOLITHIC){ + if (NFAPI_MODE == NFAPI_MONOLITHIC) { if (DL_req != NULL && TX_req!=NULL) LOG_D(PHY,"NFAPI: Sched_INFO:SFN/SLOT:%04d/%d DL_req:SFN/SLO:%04d/%d:dl_pdu:%d tx_req:SFN/SLOT:%04d/%d:pdus:%d;ul_dci %d ul_tti %d\n", frame,slot, @@ -192,33 +166,31 @@ void nr_schedule_response(NR_Sched_Rsp_t *Sched_INFO){ number_ul_dci_pdu,number_ul_tti_pdu); int pdcch_received=0; - gNB->num_pdsch_rnti[slot]=0; - for (int i=0; inumber_of_nr_dlsch_max; i++) { - gNB->dlsch[i][0]->rnti=0; - gNB->dlsch[i][0]->harq_mask=0; - } + msgTx->num_pdsch_slot=0; + msgTx->pdcch_pdu.pdcch_pdu_rel15.numDlDci = 0; + msgTx->ul_pdcch_pdu.pdcch_pdu.pdcch_pdu_rel15.numDlDci = 0; + msgTx->slot = slot; + msgTx->frame = frame; for (int i=0;idl_tti_request_body.dl_tti_pdu_list[i]; LOG_D(PHY,"NFAPI: dl_pdu %d : type %d\n",i,dl_tti_pdu->PDUType); switch (dl_tti_pdu->PDUType) { case NFAPI_NR_DL_TTI_SSB_PDU_TYPE: - handle_nr_nfapi_ssb_pdu(gNB,frame,slot, + handle_nr_nfapi_ssb_pdu(msgTx,frame,slot, dl_tti_pdu); break; case NFAPI_NR_DL_TTI_PDCCH_PDU_TYPE: AssertFatal(pdcch_received == 0, "pdcch_received is not 0, we can only handle one PDCCH PDU per slot\n"); - handle_nfapi_nr_pdcch_pdu(gNB, - frame, slot, - &dl_tti_pdu->pdcch_pdu); + msgTx->pdcch_pdu = dl_tti_pdu->pdcch_pdu; + pdcch_received = 1; break; case NFAPI_NR_DL_TTI_CSI_RS_PDU_TYPE: LOG_D(PHY,"frame %d, slot %d, Got NFAPI_NR_DL_TTI_CSI_RS_PDU_TYPE for %d.%d\n",frame,slot,DL_req->SFN,DL_req->Slot); - handle_nfapi_nr_csirs_pdu(gNB, - frame, slot, + handle_nfapi_nr_csirs_pdu(msgTx,frame,slot, &dl_tti_pdu->csi_rs_pdu); break; @@ -229,16 +201,17 @@ void nr_schedule_response(NR_Sched_Rsp_t *Sched_INFO){ AssertFatal(TX_req->pdu_list[pduIndex].num_TLV == 1, "TX_req->pdu_list[%d].num_TLV %d != 1\n", pduIndex,TX_req->pdu_list[pduIndex].num_TLV); uint8_t *sdu = (uint8_t *)TX_req->pdu_list[pduIndex].TLVs[0].value.direct; - handle_nr_nfapi_pdsch_pdu(gNB,frame,slot,&dl_tti_pdu->pdsch_pdu, sdu); - break; + AssertFatal(msgTx->num_pdsch_slot < gNB->number_of_nr_dlsch_max,"Number of PDSCH PDUs %d exceeded the limit %d\n", + msgTx->num_pdsch_slot,gNB->number_of_nr_dlsch_max); + handle_nr_nfapi_pdsch_pdu(msgTx,&dl_tti_pdu->pdsch_pdu, sdu); } } + if (number_ul_dci_pdu > 0) + msgTx->ul_pdcch_pdu = UL_dci_req->ul_dci_pdu_list[number_ul_dci_pdu-1]; // copy the last pdu + + pushNotifiedFIFO(gNB->resp_L1_tx,res); - for (int i=0;iul_dci_pdu_list[i]); - } - for (int i = 0; i < number_ul_tti_pdu; i++) { switch (UL_tti_req->pdus_list[i].pdu_type) { case NFAPI_NR_UL_CONFIG_PUSCH_PDU_TYPE: diff --git a/openair1/SCHED_NR/fapi_nr_l1.h b/openair1/SCHED_NR/fapi_nr_l1.h index 19c98e4ec0..6b93b2a3f7 100644 --- a/openair1/SCHED_NR/fapi_nr_l1.h +++ b/openair1/SCHED_NR/fapi_nr_l1.h @@ -37,13 +37,13 @@ #include "nfapi_nr_interface_scf.h" // added -void handle_nr_nfapi_ssb_pdu(PHY_VARS_gNB *gNB, +void handle_nr_nfapi_ssb_pdu(processingData_L1tx_t *msgTx, int frame,int slot, nfapi_nr_dl_tti_request_pdu_t *dl_tti_pdu); void nr_schedule_response(NR_Sched_Rsp_t *Sched_INFO); -void handle_nfapi_nr_csirs_pdu(PHY_VARS_gNB *gNB, +void handle_nfapi_nr_csirs_pdu(processingData_L1tx_t *msgTx, int frame, int slot, nfapi_nr_dl_tti_csi_rs_pdu *csirs_pdu); @@ -51,7 +51,7 @@ void handle_nfapi_nr_pdcch_pdu(PHY_VARS_gNB *gNB, int frame, int subframe, nfapi_nr_dl_tti_pdcch_pdu *dcl_dl_pdu); -void handle_nr_nfapi_pdsch_pdu(PHY_VARS_gNB *gNB,int frame,int slot, +void handle_nr_nfapi_pdsch_pdu(processingData_L1tx_t *msgTx, nfapi_nr_dl_tti_pdsch_pdu *pdsch_pdu, uint8_t *sdu); diff --git a/openair1/SCHED_NR/phy_frame_config_nr.c b/openair1/SCHED_NR/phy_frame_config_nr.c index 9be6780597..25c39846fe 100644 --- a/openair1/SCHED_NR/phy_frame_config_nr.c +++ b/openair1/SCHED_NR/phy_frame_config_nr.c @@ -30,6 +30,7 @@ ************************************************************************/ #include "PHY/defs_nr_common.h" +#include "PHY/defs_gNB.h" #include "PHY/defs_nr_UE.h" #include "SCHED_NR/phy_frame_config_nr.h" @@ -308,6 +309,21 @@ int set_tdd_configuration_dedicated_nr(NR_DL_FRAME_PARMS *frame_parms) { * *********************************************************************/ +int get_next_downlink_slot(PHY_VARS_gNB *gNB, nfapi_nr_config_request_scf_t *cfg, int nr_frame, int nr_slot) { + + int slot = nr_slot; + int frame = nr_frame; + int slots_per_frame = gNB->frame_parms.slots_per_frame; + while (true) { + slot++; + if (slot/slots_per_frame) frame++; + slot %= slots_per_frame; + int slot_type = nr_slot_select(cfg, frame, slot); + if (slot_type == NR_DOWNLINK_SLOT || slot_type == NR_MIXED_SLOT) return slot; + AssertFatal(frame < (nr_frame+2), "Something went worng. This shouldn't happen\n"); + } +} + int nr_slot_select(nfapi_nr_config_request_scf_t *cfg, int nr_frame, int nr_slot) { /* for FFD all slot can be considered as an uplink */ int mu = cfg->ssb_config.scs_common.value,check_slot=0; diff --git a/openair1/SCHED_NR/phy_frame_config_nr.h b/openair1/SCHED_NR/phy_frame_config_nr.h index 434dc41d1f..aba26283ed 100644 --- a/openair1/SCHED_NR/phy_frame_config_nr.h +++ b/openair1/SCHED_NR/phy_frame_config_nr.h @@ -92,5 +92,7 @@ void free_tdd_configuration_nr(NR_DL_FRAME_PARMS *frame_parms); void free_tdd_configuration_dedicated_nr(NR_DL_FRAME_PARMS *frame_parms); +int get_next_downlink_slot(PHY_VARS_gNB *gNB, nfapi_nr_config_request_scf_t *cfg, int nr_frame, int nr_slot); + #endif /* PHY_FRAME_CONFIG_NR_H */ diff --git a/openair1/SCHED_NR/phy_procedures_nr_gNB.c b/openair1/SCHED_NR/phy_procedures_nr_gNB.c index fbf387be0e..b005fdac54 100644 --- a/openair1/SCHED_NR/phy_procedures_nr_gNB.c +++ b/openair1/SCHED_NR/phy_procedures_nr_gNB.c @@ -124,10 +124,12 @@ void nr_common_signal_procedures (PHY_VARS_gNB *gNB,int frame,int slot,nfapi_nr_ } -void phy_procedures_gNB_TX(PHY_VARS_gNB *gNB, - int frame,int slot, +void phy_procedures_gNB_TX(processingData_L1tx_t *msgTx, + int frame, + int slot, int do_meas) { int aa; + PHY_VARS_gNB *gNB = msgTx->gNB; NR_DL_FRAME_PARMS *fp=&gNB->frame_parms; nfapi_nr_config_request_scf_t *cfg = &gNB->gNB_config; int offset = gNB->CC_id; @@ -138,7 +140,7 @@ void phy_procedures_gNB_TX(PHY_VARS_gNB *gNB, VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_PROCEDURES_gNB_TX+offset,1); - if (do_meas==1) start_meas(&gNB->phy_proc_tx); + if (do_meas==1) start_meas(&msgTx->phy_proc_tx); // clear the transmit data array and beam index for the current slot for (aa=0; aacarrier_config.num_tx_ant.value; aa++) { @@ -147,58 +149,44 @@ void phy_procedures_gNB_TX(PHY_VARS_gNB *gNB, } VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_PROCEDURES_gNB_COMMON_TX,1); - for (int i=0; iLmax; i++) { - if (gNB->ssb[i].active) { - nr_common_signal_procedures(gNB,frame,slot,gNB->ssb[i].ssb_pdu); - gNB->ssb[i].active = false; + if (msgTx->ssb[i].active) { + nr_common_signal_procedures(gNB,frame,slot,msgTx->ssb[i].ssb_pdu); + msgTx->ssb[i].active = false; } } VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_PROCEDURES_gNB_COMMON_TX,0); - int pdcch_pdu_id=find_nr_pdcch(frame,slot,gNB,SEARCH_EXIST); - int ul_pdcch_pdu_id=find_nr_ul_dci(frame,slot,gNB,SEARCH_EXIST); + int num_dl_dci = msgTx->pdcch_pdu.pdcch_pdu_rel15.numDlDci; + int num_ul_dci = msgTx->ul_pdcch_pdu.pdcch_pdu.pdcch_pdu_rel15.numDlDci; - LOG_D(PHY,"[gNB %d] Frame %d slot %d, pdcch_pdu_id %d, ul_pdcch_pdu_id %d\n", - gNB->Mod_id,frame,slot,pdcch_pdu_id,ul_pdcch_pdu_id); - - if (pdcch_pdu_id >= 0 || ul_pdcch_pdu_id >= 0) { + if (num_dl_dci > 0 || num_ul_dci > 0) { LOG_D(PHY, "[gNB %d] Frame %d slot %d Calling nr_generate_dci_top (number of UL/DL DCI %d/%d)\n", - gNB->Mod_id, frame, slot, - gNB->ul_pdcch_pdu[ul_pdcch_pdu_id].pdcch_pdu.pdcch_pdu.pdcch_pdu_rel15.numDlDci, - gNB->pdcch_pdu[pdcch_pdu_id].pdcch_pdu.pdcch_pdu_rel15.numDlDci); + gNB->Mod_id, frame, slot, num_ul_dci, num_dl_dci); VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_gNB_PDCCH_TX,1); nr_generate_dci_top(gNB, - pdcch_pdu_id>=0 ? &gNB->pdcch_pdu[pdcch_pdu_id].pdcch_pdu : NULL, - ul_pdcch_pdu_id>=0 ? &gNB->ul_pdcch_pdu[ul_pdcch_pdu_id].pdcch_pdu.pdcch_pdu : NULL, + num_dl_dci > 0 ? &msgTx->pdcch_pdu : NULL, + num_ul_dci > 0 ? &msgTx->ul_pdcch_pdu.pdcch_pdu : NULL, gNB->nr_gold_pdcch_dmrs[slot], &gNB->common_vars.txdataF[0][txdataF_offset], AMP, fp); - // free up entry in pdcch tables - if (pdcch_pdu_id>=0) gNB->pdcch_pdu[pdcch_pdu_id].frame = -1; - if (ul_pdcch_pdu_id>=0) gNB->ul_pdcch_pdu[ul_pdcch_pdu_id].frame = -1; - VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_gNB_PDCCH_TX,0); - if (pdcch_pdu_id >= 0) gNB->pdcch_pdu[pdcch_pdu_id].frame = -1; - if (ul_pdcch_pdu_id >= 0) gNB->ul_pdcch_pdu[ul_pdcch_pdu_id].frame = -1; } - for (int i=0; inum_pdsch_rnti[slot]; i++) { + if (msgTx->num_pdsch_slot > 0) { VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_GENERATE_DLSCH,1); - LOG_D(PHY, "PDSCH generation started (%d) in frame %d.%d\n", gNB->num_pdsch_rnti[slot],frame,slot); - nr_generate_pdsch(gNB,frame, slot); + LOG_D(PHY, "PDSCH generation started (%d) in frame %d.%d\n", msgTx->num_pdsch_slot,frame,slot); + nr_generate_pdsch(msgTx, frame, slot); VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_GENERATE_DLSCH,0); } for (int i=0;icsirs_pdu[i]; - if ((csirs->active == 1) && - (csirs->frame == frame) && - (csirs->slot == slot) ) { + NR_gNB_CSIRS_t *csirs = &msgTx->csirs_pdu[i]; + if ((csirs->active == 1)) { LOG_D(PHY, "CSI-RS generation started in frame %d.%d\n",frame,slot); nfapi_nr_dl_tti_csi_rs_pdu_rel15_t csi_params = csirs->csirs_pdu.csi_rs_pdu_rel15; nr_generate_csi_rs(gNB, AMP, csi_params, gNB->gNB_config.cell_config.phy_cell_id.value, slot); @@ -206,7 +194,7 @@ void phy_procedures_gNB_TX(PHY_VARS_gNB *gNB, } } - if (do_meas==1) stop_meas(&gNB->phy_proc_tx); + if (do_meas==1) stop_meas(&msgTx->phy_proc_tx); if ((frame&127) == 0) dump_pdsch_stats(gNB); @@ -272,9 +260,14 @@ void nr_postDecode(PHY_VARS_gNB *gNB, notifiedFIFO_elt_t *req) { LOG_D(PHY, "ULSCH received ok \n"); nr_fill_indication(gNB,ulsch_harq->frame, ulsch_harq->slot, rdata->ulsch_id, rdata->harq_pid, 0); } else { - LOG_D(PHY,"[gNB %d] ULSCH: Setting NAK for SFN/SF %d/%d (pid %d, status %d, round %d, TBS %d) r %d\n", + LOG_I(PHY,"[gNB %d] ULSCH: Setting NAK for SFN/SF %d/%d (pid %d, status %d, round %d, prb_start %d, prb_size %d, TBS %d) r %d\n", gNB->Mod_id, ulsch_harq->frame, ulsch_harq->slot, - rdata->harq_pid,ulsch_harq->status, ulsch_harq->round,ulsch_harq->TBS,r); + rdata->harq_pid,ulsch_harq->status, + ulsch_harq->round, + ulsch_harq->ulsch_pdu.rb_start, + ulsch_harq->ulsch_pdu.rb_size, + ulsch_harq->TBS, + r); if (ulsch_harq->round >= ulsch->Mlimit) { ulsch_harq->status = SCH_IDLE; ulsch_harq->round = 0; @@ -455,10 +448,18 @@ void nr_ulsch_procedures(PHY_VARS_gNB *gNB, int frame_rx, int slot_rx, int ULSCH void fill_ul_rb_mask(PHY_VARS_gNB *gNB, int frame_rx, int slot_rx) { int rb2, rb, nb_rb; + int prbpos; for (int symbol=0;symbol<14;symbol++) { if (gNB->gNB_config.tdd_table.max_tdd_periodicity_list[slot_rx].max_num_of_symbol_per_slot_list[symbol].slot_config.value==1){ nb_rb = 0; - for (int m=0;m<9;m++) gNB->rb_mask_ul[m] = 0; + for (int m=0;m<9;m++) { + gNB->rb_mask_ul[m] = 0; + for (int i=0;i<32;i++) { + prbpos = (m*32)+i; + if (prbpos>gNB->frame_parms.N_RB_UL) break; + gNB->rb_mask_ul[m] |= (gNB->ulprbbl[prbpos]>0 ? 1 : 0)<ulmask_symb = -1; for (int i=0;idlsch_SI[0] = new_nr_ue_dlsch(1, 1, Nsoft, 5, N_RB_DL, 0); UE->dlsch_ra[0] = new_nr_ue_dlsch(1, 1, Nsoft, 5, N_RB_DL, 0); unsigned char harq_pid = 0; //dlsch->harq_ids[subframe]; - NR_gNB_DLSCH_t *dlsch = gNB->dlsch[0][0]; + processingData_L1tx_t msgDataTx; + init_DLSCH_struct(gNB, &msgDataTx); + NR_gNB_DLSCH_t *dlsch = msgDataTx.dlsch[0][0]; nfapi_nr_dl_tti_pdsch_pdu_rel15_t *rel15 = &dlsch->harq_process.pdsch_pdu.pdsch_pdu_rel15; //time_stats_t *rm_stats, *te_stats, *i_stats; uint8_t is_crnti = 0, llr8_flag = 0; @@ -634,7 +636,7 @@ int main(int argc, char **argv) for (i = 0; i < 2; i++) { printf("gNB %d\n", i); - free_gNB_dlsch(&(gNB->dlsch[0][i]),N_RB_DL); + free_gNB_dlsch(&(msgDataTx.dlsch[0][i]),N_RB_DL); printf("UE %d\n", i); free_nr_ue_dlsch(&(UE->dlsch[0][0][i]),N_RB_DL); } diff --git a/openair1/SIMULATION/NR_PHY/dlsim.c b/openair1/SIMULATION/NR_PHY/dlsim.c index 2d7e2146ed..db95f3b8f7 100644 --- a/openair1/SIMULATION/NR_PHY/dlsim.c +++ b/openair1/SIMULATION/NR_PHY/dlsim.c @@ -931,8 +931,6 @@ int main(int argc, char **argv) // generate signal AssertFatal(input_fd==NULL,"Not ready for input signal file\n"); gNB->pbch_configured = 1; - gNB->ssb[0].ssb_pdu.ssb_pdu_rel15.bchPayload=0x001234; - gNB->ssb[0].ssb_pdu.ssb_pdu_rel15.SsbBlockIndex = 0; //Configure UE rrc.carrier.MIB = (uint8_t*) malloc(4); @@ -962,11 +960,25 @@ int main(int argc, char **argv) //NR_COMMON_channels_t *cc = RC.nrmac[0]->common_channels; snrRun = 0; + gNB->threadPool = (tpool_t*)malloc(sizeof(tpool_t)); + char tp_param[] = "n"; + initTpool(tp_param, gNB->threadPool, true); + gNB->resp_L1_tx = (notifiedFIFO_t*) malloc(sizeof(notifiedFIFO_t)); + initNotifiedFIFO(gNB->resp_L1_tx); + // we create 2 threads for L1 tx processing + notifiedFIFO_elt_t *msgL1Tx = newNotifiedFIFO_elt(sizeof(processingData_L1tx_t),0,gNB->resp_L1_tx,processSlotTX); + processingData_L1tx_t *msgDataTx = (processingData_L1tx_t *)NotifiedFifoData(msgL1Tx); + init_DLSCH_struct(gNB, msgDataTx); + msgDataTx->slot = slot; + msgDataTx->frame = frame; + memset(msgDataTx->ssb, 0, 64*sizeof(NR_gNB_SSB_t)); + reset_meas(&msgDataTx->phy_proc_tx); + gNB->phy_proc_tx_0 = &msgDataTx->phy_proc_tx; + pushTpool(gNB->threadPool,msgL1Tx); for (SNR = snr0; SNR < snr1; SNR += .2) { varArray_t *table_tx=initVarArray(1000,sizeof(double)); - reset_meas(&gNB->phy_proc_tx); // total gNB tx reset_meas(&gNB->dlsch_scrambling_stats); reset_meas(&gNB->dlsch_interleaving_stats); reset_meas(&gNB->dlsch_rate_matching_stats); @@ -1007,7 +1019,7 @@ int main(int argc, char **argv) int harq_pid = slot; NR_DL_UE_HARQ_t *UE_harq_process = dlsch0->harq_processes[harq_pid]; - NR_gNB_DLSCH_t *gNB_dlsch = gNB->dlsch[0][0]; + NR_gNB_DLSCH_t *gNB_dlsch = msgDataTx->dlsch[0][0]; nfapi_nr_dl_tti_pdsch_pdu_rel15_t *rel15 = &gNB_dlsch->harq_process.pdsch_pdu.pdsch_pdu_rel15; UE_harq_process->ack = 0; @@ -1058,10 +1070,14 @@ int main(int argc, char **argv) ptrsRePerSymb = ((rel15->rbSize + rel15->PTRSFreqDensity - 1)/rel15->PTRSFreqDensity); printf("[DLSIM] PTRS Symbols in a slot: %2u, RE per Symbol: %3u, RE in a slot %4d\n", ptrsSymbPerSlot,ptrsRePerSymb, ptrsSymbPerSlot*ptrsRePerSymb ); } + + msgDataTx->ssb[0].ssb_pdu.ssb_pdu_rel15.bchPayload=0x001234; + msgDataTx->ssb[0].ssb_pdu.ssb_pdu_rel15.SsbBlockIndex = 0; + msgDataTx->gNB = gNB; if (run_initial_sync) - nr_common_signal_procedures(gNB,frame,slot,gNB->ssb[0].ssb_pdu); + nr_common_signal_procedures(gNB,frame,slot,msgDataTx->ssb[0].ssb_pdu); else - phy_procedures_gNB_TX(gNB,frame,slot,1); + phy_procedures_gNB_TX(msgDataTx,frame,slot,1); int txdataF_offset = (slot%2) * frame_parms->samples_per_slot_wCP; @@ -1271,10 +1287,10 @@ int main(int argc, char **argv) if (print_perf==1) { printf("\ngNB TX function statistics (per %d us slot, NPRB %d, mcs %d, TBS %d, Kr %d (Zc %d))\n", 1000>>*scc->ssbSubcarrierSpacing, g_rbSize, g_mcsIndex, - gNB->dlsch[0][0]->harq_process.pdsch_pdu.pdsch_pdu_rel15.TBSize[0]<<3, - gNB->dlsch[0][0]->harq_process.K, - gNB->dlsch[0][0]->harq_process.K/((gNB->dlsch[0][0]->harq_process.pdsch_pdu.pdsch_pdu_rel15.TBSize[0]<<3)>3824?22:10)); - printDistribution(&gNB->phy_proc_tx,table_tx,"PHY proc tx"); + msgDataTx->dlsch[0][0]->harq_process.pdsch_pdu.pdsch_pdu_rel15.TBSize[0]<<3, + msgDataTx->dlsch[0][0]->harq_process.K, + msgDataTx->dlsch[0][0]->harq_process.K/((msgDataTx->dlsch[0][0]->harq_process.pdsch_pdu.pdsch_pdu_rel15.TBSize[0]<<3)>3824?22:10)); + printDistribution(gNB->phy_proc_tx_0,table_tx,"PHY proc tx"); printStatIndent2(&gNB->dlsch_encoding_stats,"DLSCH encoding time"); printStatIndent3(&gNB->dlsch_segmentation_stats,"DLSCH segmentation time"); printStatIndent3(&gNB->tinput,"DLSCH LDPC input processing time"); diff --git a/openair1/SIMULATION/NR_PHY/pbchsim.c b/openair1/SIMULATION/NR_PHY/pbchsim.c index 46b42666b5..8f4f227f6c 100644 --- a/openair1/SIMULATION/NR_PHY/pbchsim.c +++ b/openair1/SIMULATION/NR_PHY/pbchsim.c @@ -565,14 +565,15 @@ int main(int argc, char **argv) nr_gold_pbch(UE); + processingData_L1tx_t msgDataTx; // generate signal if (input_fd==NULL) { for (i=0; iLmax; i++) { if((SSB_positions >> i) & 0x01) { - gNB->ssb[i].ssb_pdu.ssb_pdu_rel15.bchPayload = 0x55dd33; - gNB->ssb[i].ssb_pdu.ssb_pdu_rel15.SsbBlockIndex = i; + msgDataTx.ssb[i].ssb_pdu.ssb_pdu_rel15.bchPayload = 0x55dd33; + msgDataTx.ssb[i].ssb_pdu.ssb_pdu_rel15.SsbBlockIndex = i; start_symbol = nr_get_ssb_start_symbol(frame_parms,i); int slot = start_symbol/14; @@ -580,7 +581,7 @@ int main(int argc, char **argv) for (aa=0; aaframe_parms.nb_antennas_tx; aa++) memset(gNB->common_vars.txdataF[aa],0,frame_parms->samples_per_slot_wCP*sizeof(int32_t)); - nr_common_signal_procedures (gNB,frame,slot,gNB->ssb[i].ssb_pdu); + nr_common_signal_procedures (gNB,frame,slot,msgDataTx.ssb[i].ssb_pdu); for (aa=0; aaframe_parms.nb_antennas_tx; aa++) { if (cyclic_prefix_type == 1) { @@ -750,7 +751,7 @@ int main(int argc, char **argv) payload_ret = (UE->pbch_vars[0]->xtra_byte == gNB_xtra_byte); for (i=0;i<3;i++){ - payload_ret += (UE->pbch_vars[0]->decoded_output[i] == ((gNB->ssb[ssb_index].ssb_pdu.ssb_pdu_rel15.bchPayload>>(8*i)) & 0xff)); + payload_ret += (UE->pbch_vars[0]->decoded_output[i] == ((msgDataTx.ssb[ssb_index].ssb_pdu.ssb_pdu_rel15.bchPayload>>(8*i)) & 0xff)); } //printf("xtra byte gNB: 0x%02x UE: 0x%02x\n",gNB_xtra_byte, UE->pbch_vars[0]->xtra_byte); //printf("ret %d\n", payload_ret); diff --git a/openair1/SIMULATION/NR_PHY/ulsim.c b/openair1/SIMULATION/NR_PHY/ulsim.c index d2b951b2fa..80a33cf2ac 100644 --- a/openair1/SIMULATION/NR_PHY/ulsim.c +++ b/openair1/SIMULATION/NR_PHY/ulsim.c @@ -672,6 +672,13 @@ int main(int argc, char **argv) char tp_param[] = "n"; initTpool(tp_param, gNB->threadPool, true); initNotifiedFIFO(gNB->respDecode); + gNB->resp_L1_tx = (notifiedFIFO_t*) malloc(sizeof(notifiedFIFO_t)); + initNotifiedFIFO(gNB->resp_L1_tx); + notifiedFIFO_elt_t *msgL1Tx = newNotifiedFIFO_elt(sizeof(processingData_L1tx_t),0,gNB->resp_L1_tx,NULL); + processingData_L1tx_t *msgDataTx = (processingData_L1tx_t *)NotifiedFifoData(msgL1Tx); + msgDataTx->slot = -1; + gNB->phy_proc_tx_0 = &msgDataTx->phy_proc_tx; + pushNotifiedFIFO(gNB->resp_L1_tx,msgL1Tx); // to unblock the process in the beginning //gNB_config = &gNB->gNB_config; //memset((void *)&gNB->UL_INFO,0,sizeof(gNB->UL_INFO)); diff --git a/openair2/GNB_APP/gnb_config.c b/openair2/GNB_APP/gnb_config.c index 7e6fd61b0e..b574cccf28 100644 --- a/openair2/GNB_APP/gnb_config.c +++ b/openair2/GNB_APP/gnb_config.c @@ -549,6 +549,32 @@ void RCconfig_nr_flexran() void RCconfig_NR_L1(void) { int j; + paramdef_t GNBSParams[] = GNBSPARAMS_DESC; + ////////// Identification parameters + paramdef_t GNBParams[] = GNBPARAMS_DESC; + + paramlist_def_t GNBParamList = {GNB_CONFIG_STRING_GNB_LIST,NULL,0}; + + config_get( GNBSParams,sizeof(GNBSParams)/sizeof(paramdef_t),NULL); + int num_gnbs = GNBSParams[GNB_ACTIVE_GNBS_IDX].numelt; + AssertFatal (num_gnbs > 0,"Failed to parse config file no gnbs %s \n",GNB_CONFIG_STRING_ACTIVE_GNBS); + + config_getlist( &GNBParamList,GNBParams,sizeof(GNBParams)/sizeof(paramdef_t),NULL); + char *ulprbbl = *GNBParamList.paramarray[0][GNB_ULPRBBLACKLIST_IDX].strptr; + if (ulprbbl) LOG_I(NR_PHY,"PRB blacklist %s\n",ulprbbl); + char *pt = strtok(ulprbbl,","); + int prbbl[275]; + int num_prbbl=0; + memset(prbbl,0,275*sizeof(int)); + + while (pt) { + prbbl[atoi(pt)] = 1; + LOG_I(NR_PHY,"Blacklisting prb %d\n",atoi(pt)); + pt = strtok(NULL,","); + num_prbbl++; + } + + paramdef_t L1_Params[] = L1PARAMS_DESC; paramlist_def_t L1_ParamList = {CONFIG_STRING_L1_LIST,NULL,0}; @@ -577,6 +603,9 @@ void RCconfig_NR_L1(void) { RC.gNB[j]->pucch0_thres = *(L1_ParamList.paramarray[j][L1_PUCCH0_DTX_THRESHOLD].uptr); RC.gNB[j]->prach_thres = *(L1_ParamList.paramarray[j][L1_PRACH_DTX_THRESHOLD].uptr); RC.gNB[j]->pusch_thres = *(L1_ParamList.paramarray[j][L1_PUSCH_DTX_THRESHOLD].uptr); + RC.gNB[j]->num_ulprbbl = num_prbbl; + LOG_I(NR_PHY,"Copying %d blacklisted PRB to L1 context\n",num_prbbl); + memcpy(RC.gNB[j]->ulprbbl,prbbl,275*sizeof(int)); if(strcmp(*(L1_ParamList.paramarray[j][L1_TRANSPORT_N_PREFERENCE_IDX].strptr), "local_mac") == 0) { //sf_ahead = 2; // Need 4 subframe gap between RX and TX }else if (strcmp(*(L1_ParamList.paramarray[j][L1_TRANSPORT_N_PREFERENCE_IDX].strptr), "nfapi") == 0) { @@ -633,6 +662,30 @@ void RCconfig_NR_L1(void) { void RCconfig_nr_macrlc() { int j; + paramdef_t GNBSParams[] = GNBSPARAMS_DESC; + ////////// Identification parameters + paramdef_t GNBParams[] = GNBPARAMS_DESC; + + paramlist_def_t GNBParamList = {GNB_CONFIG_STRING_GNB_LIST,NULL,0}; + + config_get( GNBSParams,sizeof(GNBSParams)/sizeof(paramdef_t),NULL); + int num_gnbs = GNBSParams[GNB_ACTIVE_GNBS_IDX].numelt; + AssertFatal (num_gnbs > 0,"Failed to parse config file no gnbs %s \n",GNB_CONFIG_STRING_ACTIVE_GNBS); + + config_getlist( &GNBParamList,GNBParams,sizeof(GNBParams)/sizeof(paramdef_t),NULL); + char *ulprbbl = *GNBParamList.paramarray[0][GNB_ULPRBBLACKLIST_IDX].strptr; + char *pt = strtok(ulprbbl,","); + int prbbl[275]; + int num_prbbl=0; + int prb; + memset(prbbl,0,275*sizeof(int)); + while (pt) { + prb=atoi(pt); + prbbl[prb] = 1; + pt = strtok(NULL,","); + num_prbbl++; + } + paramdef_t MacRLC_Params[] = MACRLCPARAMS_DESC; paramlist_def_t MacRLC_ParamList = {CONFIG_STRING_MACRLC_LIST,NULL,0}; @@ -697,6 +750,10 @@ void RCconfig_nr_macrlc() { AssertFatal(1==0,"MACRLC %d: %s unknown southbound midhaul\n",j,*(MacRLC_ParamList.paramarray[j][MACRLC_TRANSPORT_S_PREFERENCE_IDX].strptr)); } RC.nrmac[j]->ulsch_max_slots_inactivity = *(MacRLC_ParamList.paramarray[j][MACRLC_ULSCH_MAX_SLOTS_INACTIVITY].uptr); + RC.nrmac[j]->num_ulprbbl = num_prbbl; + LOG_I(NR_MAC,"Blacklisted PRBS %d\n",num_prbbl); + memcpy(RC.nrmac[j]->ulprbbl,prbbl,275*sizeof(prbbl[0])); + }// for (j=0;j 0 LOG_E(PHY,"No %s configuration found\n", CONFIG_STRING_MACRLC_LIST); diff --git a/openair2/GNB_APP/gnb_paramdef.h b/openair2/GNB_APP/gnb_paramdef.h index ccab98d63c..c0435434c2 100644 --- a/openair2/GNB_APP/gnb_paramdef.h +++ b/openair2/GNB_APP/gnb_paramdef.h @@ -119,6 +119,8 @@ typedef enum { #define GNB_CONFIG_STRING_SIB1TDA "sib1_tda" #define GNB_CONFIG_STRING_DOCSIRS "do_CSIRS" #define GNB_CONFIG_STRING_NRCELLID "nr_cellid" +#define GNB_CONFIG_STRING_ULPRBBLACKLIST "ul_prbblacklist" + /*-----------------------------------------------------------------------------------------------------------------------------------------*/ /* cell configuration parameters */ @@ -145,6 +147,7 @@ typedef enum { {GNB_CONFIG_STRING_SIB1TDA, NULL, 0, iptr:NULL, defintval:0, TYPE_INT, 0}, \ {GNB_CONFIG_STRING_DOCSIRS, NULL, 0, iptr:NULL, defintval:0, TYPE_INT, 0}, \ {GNB_CONFIG_STRING_NRCELLID, NULL, 0, u64ptr:NULL, defint64val:1, TYPE_UINT64, 0}, \ +{GNB_CONFIG_STRING_ULPRBBLACKLIST, NULL, 0, strptr:NULL, defstrval:"", TYPE_STRING, 0} \ } #define GNB_GNB_ID_IDX 0 @@ -167,6 +170,7 @@ typedef enum { #define GNB_SIB1_TDA_IDX 17 #define GNB_DO_CSIRS_IDX 18 #define GNB_NRCELLID_IDX 19 +#define GNB_ULPRBBLACKLIST_IDX 20 #define TRACKING_AREA_CODE_OKRANGE {0x0001,0xFFFD} #define GNBPARAMS_CHECK { \ diff --git a/openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_RA.c b/openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_RA.c index 15422db47e..de0d005163 100644 --- a/openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_RA.c +++ b/openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_RA.c @@ -887,7 +887,7 @@ void nr_get_Msg3alloc(module_id_t module_id, // msg3 is scheduled in mixed slot in the following TDD period - uint16_t msg3_nb_rb = 8 + sizeof(NR_MAC_SUBHEADER_SHORT) + sizeof(NR_MAC_SUBHEADER_SHORT); // sdu has 6 or 8 bytes + uint16_t msg3_nb_rb = 8; // sdu has 6 or 8 bytes int mu = ubwp ? ubwp->bwp_Common->genericParameters.subcarrierSpacing : diff --git a/openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_ulsch.c b/openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_ulsch.c index cb717bb9f1..37fab5c7f4 100644 --- a/openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_ulsch.c +++ b/openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_ulsch.c @@ -1290,6 +1290,9 @@ bool nr_fr1_ulsch_preprocessor(module_id_t module_id, frame_t frame, sub_frame_t const uint16_t symb = ((1 << nrOfSymbols) - 1) << startSymbolIndex; int st = 0, e = 0, len = 0; + for (int i = 0; i < bwpSize; i++) + if (RC.nrmac[module_id]->ulprbbl[i] == 1) vrb_map_UL[i]=symb; + for (int i = 0; i < bwpSize; i++) { while ((vrb_map_UL[i] & symb) != 0 && i < bwpSize) i++; @@ -1303,6 +1306,8 @@ bool nr_fr1_ulsch_preprocessor(module_id_t module_id, frame_t frame, sub_frame_t } st = e - len + 1; + LOG_D(NR_MAC,"UL %d.%d : start_prb %d, end PRB %d\n",frame,slot,st,e); + uint8_t rballoc_mask[bwpSize]; /* Calculate mask: if any RB in vrb_map_UL is blocked (1), the current RB will be 0 */ diff --git a/openair2/LAYER2/NR_MAC_gNB/nr_mac_gNB.h b/openair2/LAYER2/NR_MAC_gNB/nr_mac_gNB.h index 1258825b96..ed727fbe0a 100644 --- a/openair2/LAYER2/NR_MAC_gNB/nr_mac_gNB.h +++ b/openair2/LAYER2/NR_MAC_gNB/nr_mac_gNB.h @@ -677,7 +677,8 @@ typedef struct gNB_MAC_INST_s { NR_COMMON_channels_t common_channels[NFAPI_CC_MAX]; /// current PDU index (BCH,DLSCH) uint16_t pdu_index[NFAPI_CC_MAX]; - + int num_ulprbbl; + int ulprbbl[275]; /// NFAPI Config Request Structure nfapi_nr_config_request_scf_t config[NFAPI_CC_MAX]; /// NFAPI DL Config Request Structure diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/testing_gnb_nsa_n310.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/testing_gnb_nsa_n310.conf new file mode 100644 index 0000000000..59e507ed3e --- /dev/null +++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/testing_gnb_nsa_n310.conf @@ -0,0 +1,296 @@ +Active_gNBs = ( "gNB-Eurecom-5GNRBox"); +# Asn1_verbosity, choice in: none, info, annoying +Asn1_verbosity = "none"; + +gNBs = +( + { + ////////// Identification parameters: + gNB_ID = 0xe00; + + cell_type = "CELL_MACRO_GNB"; + + gNB_name = "gNB-Eurecom-5GNRBox"; + + // Tracking area code, 0x0000 and 0xfffe are reserved values + tracking_area_code = 1; + + plmn_list = ({mcc = 222; mnc = 01; mnc_length = 2;}); + + tr_s_preference = "local_mac" + + ////////// Physical parameters: + + ssb_SubcarrierOffset = 31; //0; + pdsch_AntennaPorts = 1; + pusch_AntennaPorts = 1; + pusch_TargetSNRx10 = 200; + pucch_TargetSNRx10 = 200; + + servingCellConfigCommon = ( + { + #spCellConfigCommon + + physCellId = 0; + +# downlinkConfigCommon + #frequencyInfoDL + # this is 3600 MHz + 84 PRBs@30kHz SCS (same as initial BWP) + absoluteFrequencySSB = 641272; //641032; #641968; 641968=start of ssb at 3600MHz + 82 RBs 641032=center of SSB at center of cell + dl_frequencyBand = 78; + # this is 3600 MHz + dl_absoluteFrequencyPointA = 640000; + #scs-SpecificCarrierList + dl_offstToCarrier = 0; +# subcarrierSpacing +# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120 + dl_subcarrierSpacing = 1; + dl_carrierBandwidth = 106; + #initialDownlinkBWP + #genericParameters + # this is RBstart=84,L=13 (275*(L-1))+RBstart + initialDLBWPlocationAndBandwidth = 6368; +# subcarrierSpacing +# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120 + initialDLBWPsubcarrierSpacing = 1; + #pdcch-ConfigCommon + initialDLBWPcontrolResourceSetZero = 0; + initialDLBWPsearchSpaceZero = 0; + #pdsch-ConfigCommon + #pdschTimeDomainAllocationList (up to 16 entries) + initialDLBWPk0_0 = 0; #for DL slot + initialDLBWPmappingType_0 = 0; #0=typeA,1=typeB + initialDLBWPstartSymbolAndLength_0 = 40; #this is SS=1,L=13 + + initialDLBWPk0_1 = 0; #for mixed slot + initialDLBWPmappingType_1 = 0; + initialDLBWPstartSymbolAndLength_1 = 57; #this is SS=1,L=5 + + #uplinkConfigCommon + #frequencyInfoUL + ul_frequencyBand = 78; + #scs-SpecificCarrierList + ul_offstToCarrier = 0; +# subcarrierSpacing +# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120 + ul_subcarrierSpacing = 1; + ul_carrierBandwidth = 106; + pMax = 20; + #initialUplinkBWP + #genericParameters + initialULBWPlocationAndBandwidth = 6368; +# subcarrierSpacing +# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120 + initialULBWPsubcarrierSpacing = 1; + #rach-ConfigCommon + #rach-ConfigGeneric + prach_ConfigurationIndex = 98; +#prach_msg1_FDM +#0 = one, 1=two, 2=four, 3=eight + prach_msg1_FDM = 0; + prach_msg1_FrequencyStart = 0; + zeroCorrelationZoneConfig = 13; + preambleReceivedTargetPower = -100; +#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200) + preambleTransMax = 6; +#powerRampingStep +# 0=dB0,1=dB2,2=dB4,3=dB6 + powerRampingStep = 1; +#ra_ReponseWindow +#1,2,4,8,10,20,40,80 + ra_ResponseWindow = 5; +#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR +#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen + ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 4; +#oneHalf (0..15) 4,8,12,16,...60,64 + ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 14; //15; +#ra_ContentionResolutionTimer +#(0..7) 8,16,24,32,40,48,56,64 + ra_ContentionResolutionTimer = 7; + rsrp_ThresholdSSB = 19; +#prach-RootSequenceIndex_PR +#1 = 839, 2 = 139 + prach_RootSequenceIndex_PR = 2; + prach_RootSequenceIndex = 1; + # SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex + # + msg1_SubcarrierSpacing = 1, + +# restrictedSetConfig +# 0=unrestricted, 1=restricted type A, 2=restricted type B + restrictedSetConfig = 0, + # pusch-ConfigCommon (up to 16 elements) + initialULBWPk2_0 = 2; # used for UL slot + initialULBWPmappingType_0 = 1 + initialULBWPstartSymbolAndLength_0 = 41; # this is SS=0 L=13 + + initialULBWPk2_1 = 2; # used for mixed slot + initialULBWPmappingType_1 = 1; + initialULBWPstartSymbolAndLength_1 = 24; # this is SS=10 L=2 + + initialULBWPk2_2 = 7; # used for Msg.3 during RA + initialULBWPmappingType_2 = 1; + initialULBWPstartSymbolAndLength_2 = 52; # this is SS=10 L=4 + + msg3_DeltaPreamble = 1; + p0_NominalWithGrant =-90; + +# pucch-ConfigCommon setup : +# pucchGroupHopping +# 0 = neither, 1= group hopping, 2=sequence hopping + pucchGroupHopping = 0; + hoppingId = 40; + p0_nominal = -90; +# ssb_PositionsInBurs_BitmapPR +# 1=short, 2=medium, 3=long + ssb_PositionsInBurst_PR = 2; + ssb_PositionsInBurst_Bitmap = 1; #0x80; + +# ssb_periodicityServingCell +# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1 + ssb_periodicityServingCell = 2; + +# dmrs_TypeA_position +# 0 = pos2, 1 = pos3 + dmrs_TypeA_Position = 0; + +# subcarrierSpacing +# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120 + subcarrierSpacing = 1; + + + #tdd-UL-DL-ConfigurationCommon +# subcarrierSpacing +# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120 + referenceSubcarrierSpacing = 1; + # pattern1 + # dl_UL_TransmissionPeriodicity + # 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10 + dl_UL_TransmissionPeriodicity = 6; + nrofDownlinkSlots = 7; //8; //7; + nrofDownlinkSymbols = 6; //0; //6; + nrofUplinkSlots = 2; + nrofUplinkSymbols = 4; //0; //4; + + ssPBCH_BlockPower = -25; + } + + ); + + + # ------- SCTP definitions + SCTP : + { + # Number of streams to use in input/output + SCTP_INSTREAMS = 2; + SCTP_OUTSTREAMS = 2; + }; + + + ////////// MME parameters: + amf_ip_address = ( { ipv4 = "192.168.18.99"; + ipv6 = "192:168:30::17"; + active = "yes"; + preference = "ipv4"; + } + ); + + ///X2 + enable_x2 = "yes"; + t_reloc_prep = 1000; /* unit: millisecond */ + tx2_reloc_overall = 2000; /* unit: millisecond */ + t_dc_prep = 1000; /* unit: millisecond */ + t_dc_overall = 2000; /* unit: millisecond */ + target_enb_x2_ip_address = ( + { ipv4 = "192.168.18.199"; + ipv6 = "192:168:30::17"; + preference = "ipv4"; + } + ); + + NETWORK_INTERFACES : + { + + GNB_INTERFACE_NAME_FOR_NG_AMF = "eth0"; + GNB_IPV4_ADDRESS_FOR_NG_AMF = "192.168.18.198/24"; + GNB_INTERFACE_NAME_FOR_NGU = "eth0"; + GNB_IPV4_ADDRESS_FOR_NGU = "192.168.18.198/24"; + GNB_PORT_FOR_S1U = 2152; # Spec 2152 + GNB_IPV4_ADDRESS_FOR_X2C = "192.168.18.198/24"; + GNB_PORT_FOR_X2C = 36422; # Spec 36422 + }; + } +); + +MACRLCs = ( + { + num_cc = 1; + tr_s_preference = "local_L1"; + tr_n_preference = "local_RRC"; + } +); + +L1s = ( + { + num_cc = 1; + tr_n_preference = "local_mac"; + pusch_proc_threads = 8; + } +); + +RUs = ( + { + local_rf = "yes" + nb_tx = 1 + nb_rx = 1 + att_tx = 0 + att_rx = 0; + bands = [7]; + max_pdschReferenceSignalPower = -27; + max_rxgain = 75; + eNB_instances = [0]; + sdr_addrs = "mgmt_addr=192.168.18.252,addr=192.168.80.50,clock_source=internal,time_source= internal" + #clock_src = "external"; + } +); + +THREAD_STRUCT = ( + { + #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT" + parallel_config = "PARALLEL_RU_L1_TRX_SPLIT"; + //parallel_config = "PARALLEL_SINGLE_THREAD"; + #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE" + worker_config = "WORKER_ENABLE"; + } +); + +security = { + # preferred ciphering algorithms + # the first one of the list that an UE supports in chosen + # valid values: nea0, nea1, nea2, nea3 + ciphering_algorithms = ( "nea0", "nea2" ); + + # preferred integrity algorithms + # the first one of the list that an UE supports in chosen + # valid values: nia0, nia1, nia2, nia3 + integrity_algorithms = ( "nia0" ); +}; + + log_config : + { + global_log_level ="info"; + global_log_verbosity ="medium"; + hw_log_level ="info"; + hw_log_verbosity ="medium"; + phy_log_level ="info"; + phy_log_verbosity ="medium"; + mac_log_level ="info"; + mac_log_verbosity ="high"; + rlc_log_level ="info"; + rlc_log_verbosity ="medium"; + pdcp_log_level ="info"; + pdcp_log_verbosity ="medium"; + rrc_log_level ="info"; + rrc_log_verbosity ="medium"; + }; +