maki/openairinterface5g
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

fixup previous bad merge (UE disconnection did not work properly anymore)

Browse Source 
Doing airplane mode off to connect a cots UE followed by airplane mode on
to disconnect it gives very bad results (bad disconnection with lots of
UL failures followed by lots of logs in the eNB). It used to work properly
after the work done by Xu Bo.

It turns out that in 2018.w04 things were still working okay. But
in 2018.w05 no.

So I ran:

    git diff 2018.w04 2018.w05

And I checked all the modifications that I thought were relevant
(everything related to the UE, oaisim, if4 and fapi has not been checked).

This commits takes back the version of 2018.w04.

The modifications in openair2/RRC/LITE/rrc_eNB.c are necessary, I think.

The other modifications may not be necessary or even wrong. To be checked
at some point.
This commit is contained in:
Cedric Roux
2018-02-14 17:59:04 +01:00
parent 2f1acb16ab
commit 91332d3906
5 changed files with 58 additions and 10 deletions
Download Patch File Download Diff File Expand all files Collapse all files
openair1/SCHED/phy_procedures_lte_eNb.c
+4 -2
View File
@@ -452,8 +452,10 @@ void phy_procedures_eNB_TX(PHY_VARS_eNB *eNB,
}
/* save old HARQ information needed for PHICH generation */
if ((ul_subframe < 10)&&
(subframe_select(fp,ul_subframe)==SF_UL)) { // This means that there is a potential UL subframe that will be scheduled here
/* TODO: check the following test - in the meantime it is put back as it was before */
//if ((ul_subframe < 10)&&
// (subframe_select(fp,ul_subframe)==SF_UL)) { // This means that there is a potential UL subframe that will be scheduled here
if (ul_subframe < 10) { // This means that there is a potential UL subframe that will be scheduled here
for (i=0; i<NUMBER_OF_UE_MAX; i++) {
harq_pid = subframe2harq_pid(fp,ul_frame,ul_subframe);
if (eNB->ulsch[i]) {