maki/openairinterface5g
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Fix if4p5

Browse Source
This commit is contained in:
Younes
2017-02-10 14:51:43 +01:00
parent e2ae88de23
commit 91e12a9724
8 changed files with 77 additions and 50 deletions
Download Patch File Download Diff File Expand all files Collapse all files
targets/ARCH/ETHERNET/USERSPACE/LIB/eth_udp.c
+5 -2
View File
@@ -197,6 +197,7 @@ int trx_eth_write_udp_IF4p5(openair0_device *device, openair0_timestamp timestam
int nblocks = nsamps;
int bytes_sent = 0;
eth_state_t *eth = (eth_state_t*)device->priv;
@@ -216,7 +217,6 @@ int trx_eth_write_udp_IF4p5(openair0_device *device, openair0_timestamp timestam
}
eth->tx_nsamps = nblocks;
bytes_sent = sendto(eth->sockfd,
buff[0],
packet_size,
@@ -245,6 +245,8 @@ int trx_eth_write_udp(openair0_device *device, openair0_timestamp timestamp, voi
//sendto_flag|=flags;
eth->tx_nsamps=nsamps;
for (i=0;i<cc;i++) {
/* buff[i] points to the position in tx buffer where the payload to be sent is
buff2 points to the position in tx buffer where the packet header will be placed */
@@ -264,7 +266,8 @@ int trx_eth_write_udp(openair0_device *device, openair0_timestamp timestamp, voi
*(uint16_t *)(buff2 + sizeof(uint16_t)) = 1+(i<<1);
*(openair0_timestamp *)(buff2 + sizeof(int32_t)) = timestamp;
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_TX_SEQ_NUM, pck_seq_num);
while(bytes_sent < UDP_PACKET_SIZE_BYTES(nsamps)) {
#if DEBUG
printf("------- TX ------: buff2 current position=%d remaining_bytes=%d bytes_sent=%d \n",
targets/ARCH/ETHERNET/USERSPACE/LIB/ethernet_lib.c
+11
View File
@@ -84,6 +84,12 @@ int trx_eth_start(openair0_device *device) {
} else {
if(eth_get_dev_conf_udp(device)!=0) return -1;
}
/* adjust MTU wrt number of samples per packet */
/*if(ethernet_tune (device,MTU_SIZE,UDP_IF4p5_PRACH_SIZE_BYTES)!=0) return -1;
if(ethernet_tune (device,RCV_TIMEOUT,999999)!=0) return -1;*/
} else if (eth->flags == ETH_RAW_IF5_MOBIPASS) {
printf("Setting ETHERNET to RAW_IF5_MODE\n");
if (eth_socket_init_raw(device)!=0) return -1;
@@ -98,6 +104,11 @@ int trx_eth_start(openair0_device *device) {
} else {
if(eth_get_dev_conf_udp(device)!=0) return -1;
}
/* adjust MTU wrt number of samples per packet */
if(ethernet_tune (device,MTU_SIZE,UDP_IF4p5_PRACH_SIZE_BYTES)!=0) return -1;
if(ethernet_tune (device,RCV_TIMEOUT,999999)!=0) return -1;
}
/* apply additional configuration */
if(ethernet_tune (device, SND_BUF_SIZE,2000000000)!=0) return -1;
targets/ARCH/ETHERNET/USERSPACE/LIB/if_defs.h
+10 -5
View File
@@ -47,6 +47,11 @@
#define ETH_RAW_IF5_MOBIPASS 4
#endif
// COMMOM HEADER LENGTHS
#define UDP_HEADER_SIZE_BYTES 8
#define IPV4_HEADER_SIZE_BYTES 60 // This is the maximum IPv4 header length
// Time domain RRH packet sizes
#define MAC_HEADER_SIZE_BYTES (sizeof(struct ether_header))
#define MAX_PACKET_SEQ_NUM(spp,spf) (spf/spp)
@@ -56,17 +61,17 @@
// Packet sizes for IF4p5 interface format
#define DATA_BLOCK_SIZE_BYTES(scaled_nblocks) (sizeof(uint16_t)*scaled_nblocks)
#define PRACH_HARD_CODED_NUM_SAMPLES (839*2)
#define PRACH_HARD_CODED_NUM_SAMPLES (839*4)
#define PRACH_BLOCK_SIZE_BYTES (sizeof(int16_t)*PRACH_HARD_CODED_NUM_SAMPLES) // FIX hard coded prach size
#define RAW_IF4p5_PDLFFT_SIZE_BYTES(nblocks) (MAC_HEADER_SIZE_BYTES + sizeof_IF4p5_header_t + DATA_BLOCK_SIZE_BYTES(nblocks))
#define RAW_IF4p5_PULFFT_SIZE_BYTES(nblocks) (MAC_HEADER_SIZE_BYTES + sizeof_IF4p5_header_t + DATA_BLOCK_SIZE_BYTES(nblocks))
#define RAW_IF4p5_PULTICK_SIZE_BYTES (MAC_HEADER_SIZE_BYTES + sizeof_IF4p5_header_t)
#define RAW_IF4p5_PRACH_SIZE_BYTES (MAC_HEADER_SIZE_BYTES + sizeof_IF4p5_header_t + PRACH_BLOCK_SIZE_BYTES)
#define UDP_IF4p5_PDLFFT_SIZE_BYTES(nblocks) (sizeof_IF4p5_header_t + DATA_BLOCK_SIZE_BYTES(nblocks))
#define UDP_IF4p5_PULFFT_SIZE_BYTES(nblocks) (sizeof_IF4p5_header_t + DATA_BLOCK_SIZE_BYTES(nblocks))
#define UDP_IF4p5_PULTICK_SIZE_BYTES (sizeof_IF4p5_header_t)
#define UDP_IF4p5_PRACH_SIZE_BYTES (sizeof_IF4p5_header_t + PRACH_BLOCK_SIZE_BYTES)
#define UDP_IF4p5_PDLFFT_SIZE_BYTES(nblocks) (UDP_HEADER_SIZE_BYTES + IPV4_HEADER_SIZE_BYTES + sizeof_IF4p5_header_t + DATA_BLOCK_SIZE_BYTES(nblocks))
#define UDP_IF4p5_PULFFT_SIZE_BYTES(nblocks) (UDP_HEADER_SIZE_BYTES + IPV4_HEADER_SIZE_BYTES + sizeof_IF4p5_header_t + DATA_BLOCK_SIZE_BYTES(nblocks))
#define UDP_IF4p5_PULTICK_SIZE_BYTES (UDP_HEADER_SIZE_BYTES + IPV4_HEADER_SIZE_BYTES + sizeof_IF4p5_header_t)
#define UDP_IF4p5_PRACH_SIZE_BYTES (UDP_HEADER_SIZE_BYTES + IPV4_HEADER_SIZE_BYTES + sizeof_IF4p5_header_t + PRACH_BLOCK_SIZE_BYTES)
// Mobipass packet sizes
#define RAW_IF5_MOBIPASS_BLOCK_SIZE_BYTES 1280
targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.if4p5.25PRB.conf
+13 -13
View File
@@ -17,7 +17,7 @@ eNBs =
mobile_country_code = "208";
mobile_network_code = "93";
mobile_network_code = "92";
////////// Physical parameters:
@@ -31,7 +31,7 @@ eNBs =
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 7;
downlink_frequency = 2685000000L;
downlink_frequency = 2660000000L;
uplink_frequency_offset = -120000000;
Nid_cell = 0;
N_RB_DL = 25;
@@ -50,7 +50,7 @@ eNBs =
pucch_nRB_CQI = 1;
pucch_nCS_AN = 0;
pucch_n1_AN = 32;
pdsch_referenceSignalPower = -29;
pdsch_referenceSignalPower = -24;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
@@ -86,7 +86,7 @@ eNBs =
rach_messagePowerOffsetGroupB = ;
*/
rach_powerRampingStep = 4;
rach_preambleInitialReceivedTargetPower = -108;
rach_preambleInitialReceivedTargetPower = -104;
rach_preambleTransMax = 10;
rach_raResponseWindowSize = 10;
rach_macContentionResolutionTimer = 48;
@@ -137,7 +137,7 @@ eNBs =
////////// MME parameters:
mme_ip_address = ( { ipv4 = "127.0.0.3";
mme_ip_address = ( { ipv4 = "192.168.12.26";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
@@ -147,18 +147,18 @@ eNBs =
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "lo";
ENB_IPV4_ADDRESS_FOR_S1_MME = "127.0.0.2/24";
ENB_INTERFACE_NAME_FOR_S1U = "lo";
ENB_IPV4_ADDRESS_FOR_S1U = "127.0.0.5/24";
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.19/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.19/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
rrh_gw_config = (
{
local_if_name = "eth0";
remote_address = "10.10.10.60";
local_address = "10.10.10.215";
local_if_name = "em2";
remote_address = "10.10.10.157";
local_address = "10.10.10.19";
local_port = 50000; #for raw option local port must be the same to remote
remote_port = 50000;
rrh_gw_active = "yes";
@@ -177,7 +177,7 @@ eNBs =
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
phy_log_verbosity ="info";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.if4p5.50PRB.conf
+13 -13
View File
@@ -17,7 +17,7 @@ eNBs =
mobile_country_code = "208";
mobile_network_code = "93";
mobile_network_code = "92";
////////// Physical parameters:
@@ -31,7 +31,7 @@ eNBs =
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 7;
downlink_frequency = 2685000000L;
downlink_frequency = 2660000000L;
uplink_frequency_offset = -120000000;
Nid_cell = 0;
N_RB_DL = 50;
@@ -50,7 +50,7 @@ eNBs =
pucch_nRB_CQI = 1;
pucch_nCS_AN = 0;
pucch_n1_AN = 32;
pdsch_referenceSignalPower = -27;
pdsch_referenceSignalPower = -24;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
@@ -86,7 +86,7 @@ eNBs =
rach_messagePowerOffsetGroupB = ;
*/
rach_powerRampingStep = 4;
rach_preambleInitialReceivedTargetPower = -108;
rach_preambleInitialReceivedTargetPower = -104;
rach_preambleTransMax = 10;
rach_raResponseWindowSize = 10;
rach_macContentionResolutionTimer = 48;
@@ -138,7 +138,7 @@ eNBs =
////////// MME parameters:
mme_ip_address = ( { ipv4 = "127.0.0.3";
mme_ip_address = ( { ipv4 = "192.168.12.26";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
@@ -148,18 +148,18 @@ eNBs =
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "lo";
ENB_IPV4_ADDRESS_FOR_S1_MME = "127.0.0.2/24";
ENB_INTERFACE_NAME_FOR_S1U = "lo";
ENB_IPV4_ADDRESS_FOR_S1U = "127.0.0.5/24";
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.19/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.19/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
rrh_gw_config = (
{
local_if_name = "eth0";
remote_address = "10.10.10.60";
local_address = "10.10.10.215";
local_if_name = "em2";
remote_address = "10.10.10.157";
local_address = "10.10.10.19";
local_port = 50000; #for raw option local port must be the same to remote
remote_port = 50000;
rrh_gw_active = "yes";
@@ -167,7 +167,7 @@ eNBs =
rf_preference = "usrp_b200";
iq_txshift = 4;
tx_sample_advance = 80;
tx_scheduling_advance = 9;
tx_scheduling_advance = 9;
}
);