Merge remote-tracking branch 'origin/develop-nr' into NR_RRCConfiguration
Conflicts: cmake_targets/CMakeLists.txt executables/nr-ru.c executables/nr-softmodem.c nfapi/open-nFAPI/nfapi/public_inc/nfapi_nr_interface.h openair1/PHY/INIT/nr_init.c openair1/PHY/NR_TRANSPORT/nr_dci_tools.c openair1/PHY/NR_TRANSPORT/nr_dlsch.c openair1/PHY/NR_TRANSPORT/nr_dlsch_coding.c openair1/PHY/NR_TRANSPORT/nr_tbs_tools.c openair1/PHY/NR_TRANSPORT/nr_transport_common_proto.h openair1/PHY/NR_UE_ESTIMATION/nr_ue_measurements.c openair1/PHY/NR_UE_TRANSPORT/nr_dlsch_decoding.c openair1/SCHED_NR/nr_ru_procedures.c openair1/SCHED_NR/phy_procedures_nr_common.c openair1/SCHED_NR/phy_procedures_nr_gNB.c openair1/SCHED_NR_UE/phy_procedures_nr_ue.c openair1/SIMULATION/NR_PHY/dlsim.c openair1/SIMULATION/NR_PHY/pbchsim.c openair1/SIMULATION/NR_PHY/ulsim.c openair2/COMMON/rrc_messages_types.h openair2/GNB_APP/gnb_config.c openair2/LAYER2/NR_MAC_UE/nr_ue_procedures.c openair2/LAYER2/NR_MAC_gNB/gNB_scheduler.c openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_phytest.c openair2/LAYER2/NR_MAC_gNB/main.c openair2/RRC/NR/MESSAGES/asn1_msg.c openair2/RRC/NR/MESSAGES/asn1_msg.h
This commit is contained in:
Raymond Knopp
@@ -1,3 +1,5 @@
|
||||
## config module management
|
||||
|
||||
```c
|
||||
configmodule_interface_t *load_configmodule(int argc, char **argv, uint32_t initflags)
|
||||
```
|
||||
@@ -14,23 +16,17 @@ void End_configmodule(void)
|
||||
* Free memory which has been allocated by the configuration module since its initialization.
|
||||
* Possibly calls the `config_<config source>_end` function
|
||||
|
||||
## Retrieving parameter's values
|
||||
|
||||
```c
|
||||
int config_get(paramdef_t *params,int numparams, char *prefix)
|
||||
```
|
||||
* Reads as many parameters as described in params, they must all be in the same configuration file section
|
||||
* Calls the `config_<config source>_get` function
|
||||
* Calls the `config_process_cmdline` function
|
||||
* `params` points to an array of `paramdef_t` structures which describes the parameters to be read, possibly including a pointer to a checking function. The following bits can possibly be set in the `paramflags` mask before calling
|
||||
- `PARAMFLAG_MANDATORY`: -1 is returned if the parameter is not explicitly defined in the config source.
|
||||
- `PARAMFLAG_DISABLECMDLINE`: parameter cannot be modified via the command line
|
||||
- `PARAMFLAG_DONOTREAD`: ignore the parameter, can be used at run-time, to alter a pre-defined `paramdef_t` array which is used in several `config_get` or/and `config_getlist` calls.
|
||||
- `PARAMFLAG_NOFREE`: do not free the memory possibly allocated by the config module to store the value of the parameter. Default behavior is for the config module to free the memory it has allocated when the `config_end` function is called.
|
||||
- `PARAMFLAG_BOOL`: Only relevant for integer types. tell the config module that when processing the command line, the corresponding option can be specified without any arggument and that in this case it must set the value to 1.
|
||||
* `params` points to an array of `paramdef_t` structures which describes the parameters to be read, possibly including a pointer to a checking function.The `paramflags` bit mask can be used to modify how a specific parameter is processed and the same mask is also used by the configuration module to return information about how the parameter has been processed. Bits definitions are described in the [`paramdef_t` structure description](./struct.md)
|
||||
|
||||
|
||||
* `params` is also used as an output parameter, `< XXX >ptr >` field is used by the config module to store the value it has read. The following bits can possibly be set in the `paramflags` mask after the call:
|
||||
- `PARAMFLAG_MALLOCINCONFIG`: memory has been allocated for the ` < XXX >ptr > ` field
|
||||
- `PARAMFLAG_PARAMSET`: parameter has been found in the config source, it is not set to default value.
|
||||
- `PARAMFLAG_PARAMSET`: parameter has been set to its default value
|
||||
* `numparams` is the number of entries in the params array
|
||||
* `prefix` is a character string to be appended to the parameters name, it defines the parameters position in the configuration file hierarchy (the section name in libconfig terminology).
|
||||
* The returned value is the number of parameters which have been assigned a value or -1 if a severe error occured
|
||||
@@ -44,6 +40,9 @@ int config_libconfig_getlist(paramlist_def_t *ParamList, paramdef_t *params, int
|
||||
* `ParamList` points to a structure, where `paramarray` field points to an array of `paramdef_t` structure, allocated by the function. It is used to return the values of the parameters.
|
||||
* The returned value is the number of occurrences in the list or -1 in case of severe error
|
||||
|
||||
## utility functions and macros
|
||||
|
||||
The configuration module also defines APIs to access the `paramdef_t` and `configmodule_interface_t` fields. They are listed in the configuration module [include file `common/config/config_userapi.h`](https://gitlab.eurecom.fr/oai/openairinterface5g/blob/develop/common/config/config_userapi.h)
|
||||
|
||||
[Configuration module developer main page](../../config/devusage.md)
|
||||
[Configuration module home](../../config.md)
|
||||
|
||||
@@ -5,6 +5,7 @@ It is defined in include file [ common/config/config_paramdesc.h ](https://gitla
|
||||
|:-----------|:------------------------------------------------------------------|----:|
|
||||
| `optname` | parameter name, as used when looking for it in the config source, 63 bytes max (64 with trailing \0) | I |
|
||||
| `helstr` | pointer to a C string printed when using --help on the command line | I |
|
||||
| `paramflags` | bit mask, used to modify how the parameter is processed, or to return to the API caller how the parameter has been set, see list in the next table | IO |
|
||||
| `strptr` `strlistptr` `u8ptr` `i8ptr` `u16ptr` `i16ptr` `uptr` `iptr` `u64ptr` `i64ptr` `dblptr` `voidptr` | a pointer to a variable where the parameter value(s) will be returned. This field is an anonymous union, the supported pointer types have been built to avoid type mismatch warnings at compile time. | O |
|
||||
| `defstrval` `defstrlistval` `defuintval` `defintval` `defint64val` `defintarrayval` `defdblval` | this field is an anonymous union, it can be used to define the default value for the parameter. It is ignored if `PARAMFLAG_MANDATORY` is set in the `paramflags` field.| I |
|
||||
| `type` | Supported parameter types are defined as integer macros. Supported simple types are `TYPE_STRING`, parameter value is returned in `strptr` field, `TYPE_INT8` `TYPE_UINT8` `TYPE_INT16` `TYPE_UINT16` `TYPE_INT32` `TYPE_UINT32` `TYPE_INT64` `TYPE_UINT64`, parameter value is returned in the corresponding uXptr or iXptr, `TYPE_MASK`, value is returned in `u32ptr`, `TYPE_DOUBLE` value is returned in `dblptr`, `TYPE_IPV4ADDR` value is returned in binary, network bytes order in `u32ptr` field. `TYPE_STRINGLIST`, `TYPE_INTARRAY` and `TYPE_UINTARRAY` are multiple values types. Multiple values are returned in respectively, `strlistptr`, `iptr` and `uptr` fields which then point to arrays. The `numelt` field gives the number of item in the array. | I |
|
||||
@@ -12,6 +13,22 @@ It is defined in include file [ common/config/config_paramdesc.h ](https://gitla
|
||||
| `chkPptr` | possible pointer to the structure containing the info used to check parameter values | I |
|
||||
| `processedvalue` | When `chkPptr` is not `ǸULL`, is used to return a value, computed from the original parameter, as read from the configuration source. | O |
|
||||
|
||||
## `paramflags` bits definition
|
||||
|
||||
|
||||
| C macro bit definition | usage | I/O |
|
||||
|:-------------------------------------|:---------------------------------------------------------------------------------------------------------------------|----:|
|
||||
| `PARAMFLAG_MANDATORY` | parameter is mandatory, comfiguration module will stop the process if it is not specified. Default value is ignored | I |
|
||||
| `PARAMFLAG_DISABLECMDLINE` | parameter cannot be specified on the command line | I |
|
||||
| `PARAMFLAG_DONOTREAD` | ignore the parameter, usefull when a parameter group is used in different context | I |
|
||||
| `PARAMFLAG_NOFREE` | The end_configmodule API won't free the memory which has been possibly allocated to store the value of the parameter.| I |
|
||||
| `PARAMFLAG_BOOL` | Parameter is a boolean, it can be specified without a value to set it to true | I |
|
||||
| `PARAMFLAG_CMDLINE_NOPREFIXENABLED` | parameter can be specified without the prefix on the command line. Must be used with care, carefuly checking unicity, especially for short parameter names | I |
|
||||
| `PARAMFLAG_MALLOCINCONFIG` | Memory for the parameter value has been allocated by the configuration module |O |
|
||||
| `PARAMFLAG_PARAMSET` | Parameter value has been explicitely set, as the parameter was specified either on the command line or the config source | O |
|
||||
| `PARAMFLAG_PARAMSETDEF` | Parameter value has been set to it's default | O |
|
||||
|
||||
|
||||
# `paramlist_def_t`structure
|
||||
It is defined in include file [ common/config/config_paramdesc.h ](https://gitlab.eurecom.fr/oai/openairinterface5g/blob/develop/common/config/config_paramdesc.h#L160).
|
||||
It is used as an argument to `config_getlist` calls, to get values of multiple occurrences of group of parameters.
|
||||
|
||||
@@ -167,8 +167,8 @@ int config_check_unknown_cmdlineopt(char *prefix) {
|
||||
char testprefix[CONFIG_MAXOPTLENGTH];
|
||||
int finalcheck = 0;
|
||||
memset(testprefix,0,sizeof(testprefix));
|
||||
|
||||
memset(testprefix,0,sizeof(testprefix));
|
||||
|
||||
if (prefix != NULL) {
|
||||
if (strcmp(prefix,CONFIG_CHECKALLSECTIONS) == 0)
|
||||
finalcheck = 1;
|
||||
@@ -253,7 +253,9 @@ int config_process_cmdline(paramdef_t *cfgoptions,int numoptions, char *prefix)
|
||||
}
|
||||
|
||||
if ( ((strlen(oneargv) == 2) && (strcmp(oneargv + 1,cfgpath) == 0)) || /* short option, one "-" */
|
||||
((strlen(oneargv) > 2) && (strcmp(oneargv + 2,cfgpath ) == 0 )) ) {
|
||||
((strlen(oneargv) > 2) && (strcmp(oneargv + 2,cfgpath ) == 0 )) || /* long option beginning with "--" */
|
||||
((strlen(oneargv) == 2) && (strcmp(oneargv + 1,cfgoptions[n].optname) == 0) && (cfgoptions[n].paramflags & PARAMFLAG_CMDLINE_NOPREFIXENABLED )) ||
|
||||
((strlen(oneargv) > 2) && (strcmp(oneargv + 2,cfgpath ) == 0 ) && (cfgoptions[n].paramflags & PARAMFLAG_CMDLINE_NOPREFIXENABLED )) ) {
|
||||
char *valptr=NULL;
|
||||
int ret;
|
||||
config_get_if()->argv_info[i] |= CONFIG_CMDLINEOPT_PROCESSED;
|
||||
|
||||
@@ -45,7 +45,7 @@
|
||||
#define PARAMFLAG_DONOTREAD (1 << 2) // parameter must be ignored in get function
|
||||
#define PARAMFLAG_NOFREE (1 << 3) // don't free parameter in end function
|
||||
#define PARAMFLAG_BOOL (1 << 4) // integer param can be 0 or 1
|
||||
|
||||
#define PARAMFLAG_CMDLINE_NOPREFIXENABLED (1 << 5) // on the command line, allow a parameter to be specified without the prefix
|
||||
|
||||
/* Flags used by config modules to return info to calling modules and/or to for internal usage*/
|
||||
#define PARAMFLAG_MALLOCINCONFIG (1 << 15) // parameter allocated in config module
|
||||
|
||||
@@ -172,7 +172,7 @@ int config_get_processedint(paramdef_t *cfgoption) {
|
||||
return ret;
|
||||
}
|
||||
void config_printhelp(paramdef_t *params,int numparams, char *prefix) {
|
||||
printf("\n-----Help for section %-26s: %03i entries------\n",(prefix==NULL)?"(root section)":prefix ,numparams);
|
||||
printf("\n-----Help for section %-26s: %03i entries------\n",(prefix==NULL)?"(root section)":prefix,numparams);
|
||||
|
||||
for (int i=0 ; i<numparams ; i++) {
|
||||
printf(" %s%s: %s",
|
||||
@@ -204,6 +204,16 @@ int config_execcheck(paramdef_t *params, int numparams, char *prefix) {
|
||||
return st;
|
||||
}
|
||||
|
||||
int config_paramidx_fromname(paramdef_t *params, int numparams, char *name) {
|
||||
for (int i=0; i<numparams ; i++) {
|
||||
if (strcmp(name,params[i].optname) == 0)
|
||||
return i;
|
||||
}
|
||||
|
||||
fprintf(stderr,"[CONFIG]config_paramidx_fromname , %s is not a valid parameter name\n",name);
|
||||
return -1;
|
||||
}
|
||||
|
||||
int config_get(paramdef_t *params, int numparams, char *prefix) {
|
||||
int ret= -1;
|
||||
|
||||
@@ -438,7 +448,7 @@ int config_setdefault_intlist(paramdef_t *cfgoptions, char *prefix) {
|
||||
status=1;
|
||||
|
||||
for (int j=0; j<cfgoptions->numelt ; j++) {
|
||||
printf_params("[CONFIG] %s[%i] set to default value %i\n",cfgoptions->optname ,j,(int)cfgoptions->iptr[j]);
|
||||
printf_params("[CONFIG] %s[%i] set to default value %i\n",cfgoptions->optname,j,(int)cfgoptions->iptr[j]);
|
||||
}
|
||||
}
|
||||
|
||||
@@ -452,7 +462,7 @@ int config_setdefault_double(paramdef_t *cfgoptions, char *prefix) {
|
||||
if( ((cfgoptions->paramflags & PARAMFLAG_MANDATORY) == 0)) {
|
||||
*(cfgoptions->dblptr)=cfgoptions->defdblval;
|
||||
status=1;
|
||||
printf_params("[CONFIG] %s set to default value %lf\n",cfgoptions->optname , *(cfgoptions->dblptr));
|
||||
printf_params("[CONFIG] %s set to default value %lf\n",cfgoptions->optname, *(cfgoptions->dblptr));
|
||||
}
|
||||
|
||||
return status;
|
||||
@@ -460,7 +470,7 @@ int config_setdefault_double(paramdef_t *cfgoptions, char *prefix) {
|
||||
|
||||
int config_assign_ipv4addr(paramdef_t *cfgoptions, char *ipv4addr) {
|
||||
config_check_valptr(cfgoptions,(char **)&(cfgoptions->uptr), sizeof(int));
|
||||
int rst=inet_pton(AF_INET, ipv4addr ,cfgoptions->uptr );
|
||||
int rst=inet_pton(AF_INET, ipv4addr,cfgoptions->uptr );
|
||||
|
||||
if (rst == 1 && *(cfgoptions->uptr) > 0) {
|
||||
printf_params("[CONFIG] %s: %s\n",cfgoptions->optname, ipv4addr);
|
||||
|
||||
@@ -39,6 +39,7 @@ extern "C"
|
||||
{
|
||||
#endif
|
||||
|
||||
/* utility functions to ease usage of config module structures */
|
||||
#define CONFIG_GETSOURCE ( (config_get_if()==NULL) ? NULL : config_get_if()->cfgmode )
|
||||
#define CONFIG_GETNUMP ( (config_get_if()==NULL) ? 0 : config_get_if()->num_cfgP )
|
||||
#define CONFIG_GETP(P) ( (config_get_if()==NULL) ? NULL : config_get_if()->cfgP[P] )
|
||||
@@ -46,6 +47,8 @@ extern "C"
|
||||
#define CONFIG_SETRTFLAG(P) if (config_get_if()) { config_get_if()->rtflags |= P; }
|
||||
#define CONFIG_CLEARRTFLAG(P) if (config_get_if()) { config_get_if()->rtflags &= (~P); }
|
||||
#define CONFIG_ISPARAMFLAGSET(P,F) ( !!(P.paramflags & F))
|
||||
extern int config_paramidx_fromname(paramdef_t *params,int numparams, char *name);
|
||||
|
||||
/* utility functions, to be used by configuration module and/or configuration libraries */
|
||||
extern configmodule_interface_t *config_get_if(void);
|
||||
extern char *config_check_valptr(paramdef_t *cfgoptions, char **ptr, int length) ;
|
||||
|
||||
@@ -232,7 +232,7 @@ int write_file_matlab(const char *fname,
|
||||
void log_getconfig(log_t *g_log)
|
||||
{
|
||||
char *gloglevel = NULL;
|
||||
int consolelog ;
|
||||
int consolelog = 0;
|
||||
paramdef_t logparams_defaults[] = LOG_GLOBALPARAMS_DESC;
|
||||
paramdef_t logparams_level[MAX_LOG_PREDEF_COMPONENTS];
|
||||
paramdef_t logparams_logfile[MAX_LOG_PREDEF_COMPONENTS];
|
||||
|
||||
@@ -25,7 +25,6 @@
|
||||
* \date 2009 - 2014
|
||||
* \version 0.5
|
||||
* @ingroup util
|
||||
|
||||
*/
|
||||
|
||||
#ifndef __LOG_H__
|
||||
@@ -297,7 +296,7 @@ extern "C" {
|
||||
# include "log_if.h"
|
||||
/*----------------------------------------------------------------------------*/
|
||||
int logInit (void);
|
||||
int isLogInitDone (void);
|
||||
int isLogInitDone (void);
|
||||
void logRecord_mt(const char *file, const char *func, int line,int comp, int level, const char *format, ...) __attribute__ ((format (printf, 6, 7)));
|
||||
void vlogRecord_mt(const char *file, const char *func, int line, int comp, int level, const char *format, va_list args );
|
||||
void log_dump(int component, void *buffer, int buffsize,int datatype, const char *format, ... );
|
||||
@@ -363,14 +362,14 @@ int32_t write_file_matlab(const char *fname, const char *vname, void *data, int
|
||||
|
||||
|
||||
|
||||
/*------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------*/
|
||||
/* LOG globalconfiguration parameters */
|
||||
/* optname help paramflags XXXptr defXXXval type numelt */
|
||||
/*------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------*/
|
||||
/*-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------*/
|
||||
/* LOG globalconfiguration parameters */
|
||||
/* optname help paramflags XXXptr defXXXval type numelt */
|
||||
/*-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------*/
|
||||
#define LOG_GLOBALPARAMS_DESC { \
|
||||
{LOG_CONFIG_STRING_GLOBAL_LOG_LEVEL, "Default log level for all componemts\n", 0, strptr:(char **)&gloglevel, defstrval:log_level_names[2].name, TYPE_STRING, 0}, \
|
||||
{LOG_CONFIG_STRING_GLOBAL_LOG_ONLINE, "Default console output option, for all components\n", 0, iptr:&(consolelog), defintval:1, TYPE_INT, 0}, \
|
||||
{LOG_CONFIG_STRING_GLOBAL_LOG_OPTIONS, LOG_CONFIG_HELP_OPTIONS, 0, strlistptr:NULL, defstrlistval:NULL, TYPE_STRINGLIST,0} \
|
||||
{LOG_CONFIG_STRING_GLOBAL_LOG_LEVEL, "Default log level for all componemts\n", 0, strptr:(char **)&gloglevel, defstrval:log_level_names[2].name, TYPE_STRING, 0}, \
|
||||
{LOG_CONFIG_STRING_GLOBAL_LOG_ONLINE, "Default console output option, for all components\n", 0, iptr:&(consolelog), defintval:1, TYPE_INT, 0}, \
|
||||
{LOG_CONFIG_STRING_GLOBAL_LOG_OPTIONS, LOG_CONFIG_HELP_OPTIONS, 0, strlistptr:NULL, defstrlistval:NULL, TYPE_STRINGLIST, 0} \
|
||||
}
|
||||
|
||||
#define LOG_OPTIONS_IDX 2
|
||||
|
||||
@@ -634,7 +634,7 @@ void *vcd_dumper_thread_rt(void *args)
|
||||
uint32_t data_ready_wait;
|
||||
|
||||
# if defined(ENABLE_ITTI)
|
||||
signal_mask();
|
||||
return 0; //signal_mask(); //function defined at common/utils/ocp_itti/intertask_interface.cpp
|
||||
# endif
|
||||
|
||||
sched_param.sched_priority = sched_get_priority_min(SCHED_FIFO) + 1;
|
||||
|
||||
@@ -11,11 +11,11 @@
|
||||
#include <common/utils/system.h>
|
||||
|
||||
typedef struct timer_elm_s {
|
||||
timer_type_t type; ///< Timer type
|
||||
long instance;
|
||||
timer_type_t type; ///< Timer type
|
||||
long instance;
|
||||
long duration;
|
||||
uint64_t timeout;
|
||||
void *timer_arg; ///< Optional argument that will be passed when timer expires
|
||||
void *timer_arg; ///< Optional argument that will be passed when timer expires
|
||||
} timer_elm_t ;
|
||||
|
||||
typedef struct task_list_s {
|
||||
|
||||
@@ -25,7 +25,7 @@ typedef struct {
|
||||
typedef struct {
|
||||
uint32_t interval_sec;
|
||||
uint32_t interval_us;
|
||||
long task_id;
|
||||
long task_id;
|
||||
int32_t instance;
|
||||
timer_type_t type;
|
||||
void *timer_arg;
|
||||
@@ -33,7 +33,7 @@ typedef struct {
|
||||
} timer_create_t;
|
||||
|
||||
typedef struct {
|
||||
long task_id;
|
||||
long task_id;
|
||||
long timer_id;
|
||||
} timer_delete_t;
|
||||
|
||||
@@ -536,6 +536,7 @@ int timer_setup(
|
||||
int timer_remove(long timer_id);
|
||||
#define timer_stop timer_remove
|
||||
int signal_handle(int *end);
|
||||
int signal_mask(void);
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
|
||||
@@ -123,7 +123,7 @@ void client_printf(const char *message, ...) {
|
||||
|
||||
if (telnetparams.new_socket > 0) {
|
||||
vsnprintf(telnetparams.msgbuff,sizeof(telnetparams.msgbuff)-1,message, va_args);
|
||||
send(telnetparams.new_socket,telnetparams.msgbuff , strlen(telnetparams.msgbuff), MSG_NOSIGNAL);
|
||||
send(telnetparams.new_socket,telnetparams.msgbuff, strlen(telnetparams.msgbuff), MSG_NOSIGNAL);
|
||||
} else {
|
||||
vprintf(message, va_args);
|
||||
}
|
||||
@@ -475,7 +475,7 @@ int process_command(char *buf) {
|
||||
memset(cmdb,0,sizeof(cmdb));
|
||||
bufbck=strdup(buf);
|
||||
rt=CMDSTATUS_NOTFOUND;
|
||||
j = sscanf(buf,"%9s %9s %9[^\t\n]",modulename,cmd,cmdb);
|
||||
j = sscanf(buf,"%19s %19s %19[^\t\n]",modulename,cmd,cmdb);
|
||||
|
||||
if (telnetparams.telnetdbg > 0)
|
||||
printf("process_command: %i words, module=%s cmd=%s, parameters= %s\n",j,modulename,cmd,cmdb);
|
||||
@@ -543,7 +543,7 @@ void run_telnetsrv(void) {
|
||||
char buf[TELNET_MAX_MSGLENGTH];
|
||||
struct sockaddr cli_addr;
|
||||
unsigned int cli_len = sizeof(cli_addr);
|
||||
int readc , filled;
|
||||
int readc, filled;
|
||||
int status;
|
||||
int optval = 1;
|
||||
pthread_setname_np(pthread_self(), "telnet");
|
||||
@@ -604,7 +604,7 @@ void run_telnetsrv(void) {
|
||||
}
|
||||
|
||||
if (telnetparams.telnetdbg > 0)
|
||||
printf("[TELNETSRV] Command received: readc %i filled %i \"%s\"\n", readc, filled ,buf);
|
||||
printf("[TELNETSRV] Command received: readc %i filled %i \"%s\"\n", readc, filled,buf);
|
||||
|
||||
if (buf[0] == '!') {
|
||||
if (buf[1] == '!') {
|
||||
|
||||
Reference in New Issue
Block a user