Merge remote-tracking branch 'origin/issue425_buildsimplification' into develop_integration_2019_w21

ci-scripts/oai-ci-vm-tool

@@ -236,7 +236,7 @@ case $key in
     VM_NAME=ci-enb-usrp
     ARCHIVES_LOC=enb_usrp
     LOG_PATTERN=.Rel14.txt
-    NB_PATTERN_FILES=7
+    NB_PATTERN_FILES=9
     BUILD_OPTIONS="--eNB -w USRP --mu"
     NBARGS=$[$NBARGS+256]
     shift
@@ -244,9 +244,9 @@ case $key in
     -v2)
     VM_NAME=ci-basic-sim
     ARCHIVES_LOC=basic_sim
-    LOG_PATTERN=basic_simulator
+    LOG_PATTERN=Rel14.txt
-    NB_PATTERN_FILES=2
+    NB_PATTERN_FILES=13
-    BUILD_OPTIONS="--basic-simulator"
+    BUILD_OPTIONS="--eNB --UE"
     VM_MEMORY=8192
     VM_CPU=4
     RUN_OPTIONS="complex"
@@ -279,8 +279,8 @@ case $key in
     VM_CPU=4
     ARCHIVES_LOC=enb_eth
     LOG_PATTERN=.Rel14.txt
-    NB_PATTERN_FILES=6
+    NB_PATTERN_FILES=8
-    BUILD_OPTIONS="--eNB -t ETHERNET"
+    BUILD_OPTIONS="--eNB"
     NBARGS=$[$NBARGS+256]
     shift
     ;;
@@ -290,8 +290,8 @@ case $key in
     VM_CPU=4
     ARCHIVES_LOC=ue_eth
     LOG_PATTERN=.Rel14.txt
-    NB_PATTERN_FILES=10
+    NB_PATTERN_FILES=12
-    BUILD_OPTIONS="--UE -t ETHERNET"
+    BUILD_OPTIONS="--UE"
     NBARGS=$[$NBARGS+256]
     shift
     ;;
@@ -332,16 +332,16 @@ case $key in
         VM_NAME=ci-enb-usrp
         ARCHIVES_LOC=enb_usrp
         LOG_PATTERN=.Rel14.txt
-        NB_PATTERN_FILES=7
+        NB_PATTERN_FILES=9
         BUILD_OPTIONS="--eNB -w USRP --mu"
         NBARGS=$[$NBARGS+256]
         ;;
         basic-sim)
         VM_NAME=ci-basic-sim
         ARCHIVES_LOC=basic_sim
-        LOG_PATTERN=basic_simulator
+        LOG_PATTERN=.Rel14.txt
-        NB_PATTERN_FILES=2
+        NB_PATTERN_FILES=13
-        BUILD_OPTIONS="--basic-simulator"
+        BUILD_OPTIONS="--UE --eNB"
         VM_MEMORY=8192
         VM_CPU=4
         RUN_OPTIONS="complex"
@@ -371,8 +371,8 @@ case $key in
         VM_CPU=4
         ARCHIVES_LOC=enb_eth
         LOG_PATTERN=.Rel14.txt
-        NB_PATTERN_FILES=6
+        NB_PATTERN_FILES=8
-        BUILD_OPTIONS="--eNB -t ETHERNET"
+        BUILD_OPTIONS="--eNB"
         NBARGS=$[$NBARGS+256]
         ;;
         ue-ethernet)
@@ -381,8 +381,8 @@ case $key in
         VM_CPU=4
         ARCHIVES_LOC=ue_eth
         LOG_PATTERN=.Rel14.txt
-        NB_PATTERN_FILES=10
+        NB_PATTERN_FILES=12
-        BUILD_OPTIONS="--UE -t ETHERNET"
+        BUILD_OPTIONS="--UE"
         NBARGS=$[$NBARGS+256]
         ;;
         flexran-rtc)

ci-scripts/reportBuildLocally.sh

@@ -566,9 +566,11 @@ function report_build {
     summary_table_footer
 
     summary_table_header "OAI Build basic simulator option" ./archives/basic_sim
-    summary_table_row "Basic Simulator eNb - Release 14" ./archives/basic_sim/basic_simulator_enb.txt "Built target lte-softmodem" ./basic_sim_row1.html
+    summary_table_row "LTE SoftModem - Release 14" ./archives/basic_sim/lte-softmodem.Rel14.txt "Built target lte-softmodem" ./basic_sim_row1.html
-    summary_table_row "Basic Simulator UE - Release 14" ./archives/basic_sim/basic_simulator_ue.txt "Built target lte-uesoftmodem" ./basic_sim_row2.html
+    summary_table_row "LTE UE SoftModem - Release 14" ./archives/basic_sim/lte-uesoftmodem.Rel14.txt "Built target lte-uesoftmodem" ./basic_sim_row2.htm
     summary_table_row "Conf 2 UE data - Release 14" ./archives/basic_sim/conf2uedata.Rel14.txt "Built target conf2uedata" ./basic_sim_row3.html
+    summary_table_row "RB Tool - Release 14" ./archives/basic_sim/rb_tool.Rel14.txt "Built target rb_tool" ./basic_sim_row4.html
+    summary_table_row "NASMESH - Release 14" ./archives/basic_sim/nasmesh.Rel14.txt "Built target nasmesh" ./basic_sim_row5.html
     summary_table_footer
 
     summary_table_header "OAI Build Physical simulators option" ./archives/phy_sim
@@ -644,7 +646,7 @@ function report_build {
             cat $DETAILS_TABLE >> ./build_results.html
         done
     fi
-    if [ -f ./basic_sim_row1.html ] || [ -f ./basic_sim_row2.html ] || [ -f ./basic_sim_row3.html ]
+    if [ -f ./basic_sim_row1.html ] || [ -f ./basic_sim_row2.html ] || [ -f ./basic_sim_row3.html ] || [ -f ./basic_sim_row4.html ] || [ -f ./basic_sim_row5.html ]
     then
         for DETAILS_TABLE in `ls ./basic_sim_row*.html`
         do

ci-scripts/runTestOnVM.sh

@@ -80,15 +80,15 @@ function start_basic_sim_enb {
     fi
     echo "echo \"grep N_RB_DL ci-$LOC_CONF_FILE\"" >> $1
     echo "grep N_RB_DL ci-$LOC_CONF_FILE | sed -e 's#N_RB_DL.*=#N_RB_DL =#'" >> $1
-    echo "echo \"cd /home/ubuntu/tmp/cmake_targets/basic_simulator/enb/\"" >> $1
+    echo "echo \"cd /home/ubuntu/tmp/cmake_targets/lte_build_oai/build/\"" >> $1
-    echo "sudo chmod 777 /home/ubuntu/tmp/cmake_targets/basic_simulator" >> $1
+    echo "sudo chmod 777 /home/ubuntu/tmp/cmake_targets/lte_build_oai/" >> $1
-    echo "sudo chmod 777 /home/ubuntu/tmp/cmake_targets/basic_simulator/enb/" >> $1
+    echo "sudo chmod 777 /home/ubuntu/tmp/cmake_targets/lte_build_oai/build/" >> $1
-    echo "cd /home/ubuntu/tmp/cmake_targets/basic_simulator/enb/" >> $1
+    echo "cd /home/ubuntu/tmp/cmake_targets/lte_build_oai/build/" >> $1
-    echo "echo \"ulimit -c unlimited && ./lte-softmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE\" > ./my-lte-softmodem-run.sh " >> $1
+    echo "echo \"ulimit -c unlimited && ./lte-softmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE --log_config.global_log_options level,nocolor --basicsim\" > ./my-lte-softmodem-run.sh " >> $1
     echo "chmod 775 ./my-lte-softmodem-run.sh" >> $1
     echo "cat ./my-lte-softmodem-run.sh" >> $1
     echo "if [ -e /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE ]; then sudo sudo rm -f /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE; fi" >> $1
-    echo "sudo -E daemon --inherit --unsafe --name=enb_daemon --chdir=/home/ubuntu/tmp/cmake_targets/basic_simulator/enb -o /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE ./my-lte-softmodem-run.sh" >> $1
+    echo "sudo -E daemon --inherit --unsafe --name=enb_daemon --chdir=/home/ubuntu/tmp/cmake_targets/lte_build_oai/build -o /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE ./my-lte-softmodem-run.sh" >> $1
 
     ssh -T -o StrictHostKeyChecking=no ubuntu@$LOC_VM_IP_ADDR < $1
     rm $1
@@ -123,14 +123,14 @@ function start_basic_sim_ue {
     local LOC_UE_LOG_FILE=$3
     local LOC_NB_RBS=$4
     local LOC_FREQUENCY=$5
-    echo "echo \"cd /home/ubuntu/tmp/cmake_targets/basic_simulator/ue\"" > $1
+    echo "echo \"cd /home/ubuntu/tmp/cmake_targets/lte_build_oai/build/\"" > $1
-    echo "sudo chmod 777 /home/ubuntu/tmp/cmake_targets/basic_simulator/ue" >> $1
+    echo "sudo chmod 777 /home/ubuntu/tmp/cmake_targets/lte_build_oai/build/" >> $1
-    echo "cd /home/ubuntu/tmp/cmake_targets/basic_simulator/ue" >> $1
+    echo "cd /home/ubuntu/tmp/cmake_targets/lte_build_oai/build" >> $1
-    echo "echo \"./lte-uesoftmodem -C ${LOC_FREQUENCY}000000 -r $LOC_NB_RBS --ue-rxgain 140\" > ./my-lte-uesoftmodem-run.sh" >> $1
+    echo "echo \"./lte-uesoftmodem -C ${LOC_FREQUENCY}000000 -r $LOC_NB_RBS  --log_config.global_log_options level,nocolor --basicsim\" > ./my-lte-uesoftmodem-run.sh" >> $1
     echo "chmod 775 ./my-lte-uesoftmodem-run.sh" >> $1
     echo "cat ./my-lte-uesoftmodem-run.sh" >> $1
     echo "if [ -e /home/ubuntu/tmp/cmake_targets/log/$LOC_UE_LOG_FILE ]; then sudo sudo rm -f /home/ubuntu/tmp/cmake_targets/log/$LOC_UE_LOG_FILE; fi" >> $1
-    echo "sudo -E daemon --inherit --unsafe --name=ue_daemon --chdir=/home/ubuntu/tmp/cmake_targets/basic_simulator/ue -o /home/ubuntu/tmp/cmake_targets/log/$LOC_UE_LOG_FILE ./my-lte-uesoftmodem-run.sh" >> $1
+    echo "sudo -E daemon --inherit --unsafe --name=ue_daemon --chdir=/home/ubuntu/tmp/cmake_targets/lte_build_oai/build -o /home/ubuntu/tmp/cmake_targets/log/$LOC_UE_LOG_FILE ./my-lte-uesoftmodem-run.sh" >> $1
 
     ssh -T -o StrictHostKeyChecking=no ubuntu@$2 < $1
     rm $1
@@ -418,14 +418,14 @@ function recover_core_dump {
     then
         local TC=`echo $3 | sed -e "s#^.*enb_##" -e "s#Hz.*#Hz#"`
         echo "Segmentation fault detected on enb -> recovering core dump"
-        echo "cd /home/ubuntu/tmp/cmake_targets/basic_simulator/enb" > $1
+        echo "cd /home/ubuntu/tmp/cmake_targets/lte_build_oai/build/" > $1
         echo "sync" >> $1
         echo "sudo tar -cjhf basic-simulator-enb-core-${TC}.bz2 core lte-softmodem *.so ci-lte-basic-sim.conf my-lte-softmodem-run.sh" >> $1
         echo "sudo rm core" >> $1
         echo "rm ci-lte-basic-sim.conf" >> $1
         echo "sync" >> $1
         ssh -T -o StrictHostKeyChecking=no ubuntu@$2 < $1
-        scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/basic_simulator/enb/basic-simulator-enb-core-${TC}.bz2 $4
+        scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/lte_build_oai/build/basic-simulator-enb-core-${TC}.bz2 $4
         rm -f $1
     fi
 }
@@ -694,8 +694,8 @@ function build_ue_on_separate_folder {
     echo "cd cmake_targets/" >> $1
     echo "mkdir log" >> $1
     echo "chmod 777 log" >> $1
-    echo "echo \"./build_oai --UE -t ETHERNET \"" >> $1
+    echo "echo \"./build_oai --UE \"" >> $1
-    echo "./build_oai --UE -t ETHERNET > log/ue-build.txt 2>&1" >> $1
+    echo "./build_oai --UE > log/ue-build.txt 2>&1" >> $1
     echo "cd tools" >> $1
     echo "sudo ifconfig lo: 127.0.0.2 netmask 255.0.0.0 up" >> $1
     echo "sudo chmod 666 /etc/iproute2/rt_tables" >> $1
@@ -729,9 +729,9 @@ function start_l2_sim_enb {
     echo "cd /home/ubuntu/tmp/cmake_targets/lte_build_oai/build/" >> $1
     if [ $LOC_S1_CONFIGURATION -eq 0 ]
     then
-        echo "echo \"ulimit -c unlimited && ./lte-softmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE --noS1\" > ./my-lte-softmodem-run.sh " >> $1
+        echo "echo \"ulimit -c unlimited && ./lte-softmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE --log_config.global_log_options level,nocolor --noS1\" > ./my-lte-softmodem-run.sh " >> $1
     else
-        echo "echo \"ulimit -c unlimited && ./lte-softmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE\" > ./my-lte-softmodem-run.sh " >> $1
+        echo "echo \"ulimit -c unlimited && ./lte-softmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE --log_config.global_log_options level,nocolor \" > ./my-lte-softmodem-run.sh " >> $1
     fi
     echo "chmod 775 ./my-lte-softmodem-run.sh" >> $1
     echo "cat ./my-lte-softmodem-run.sh" >> $1
@@ -837,9 +837,9 @@ function start_l2_sim_ue {
     echo "cd /home/ubuntu/tmp/cmake_targets/lte_build_oai/build/" >> $1
     if [ $LOC_S1_CONFIGURATION -eq 0 ]
     then
-        echo "echo \"ulimit -c unlimited && ./lte-uesoftmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE --L2-emul 3 --num-ues $LOC_NB_UES --nums_ue_thread $LOC_NB_UES --nokrnmod 1 --noS1\" > ./my-lte-softmodem-run.sh " >> $1
+        echo "echo \"ulimit -c unlimited && ./lte-uesoftmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE --L2-emul 3 --num-ues $LOC_NB_UES --nums_ue_thread $LOC_NB_UES --nokrnmod 1 --log_config.global_log_options level,nocolor --noS1\" > ./my-lte-softmodem-run.sh " >> $1
     else
-        echo "echo \"ulimit -c unlimited && ./lte-uesoftmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE --L2-emul 3 --num-ues $LOC_NB_UES --nums_ue_thread $LOC_NB_UES --nokrnmod 1\" > ./my-lte-softmodem-run.sh " >> $1
+        echo "echo \"ulimit -c unlimited && ./lte-uesoftmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE --L2-emul 3 --num-ues $LOC_NB_UES --nums_ue_thread $LOC_NB_UES --nokrnmod 1 --log_config.global_log_options level,nocolor\" > ./my-lte-softmodem-run.sh " >> $1
     fi
     echo "chmod 775 ./my-lte-softmodem-run.sh" >> $1
     echo "cat ./my-lte-softmodem-run.sh" >> $1
@@ -949,9 +949,9 @@ function start_rf_sim_enb {
     echo "cd /home/ubuntu/tmp/cmake_targets/lte_build_oai/build/" >> $1
     if [ $LOC_S1_CONFIGURATION -eq 0 ]
     then
-        echo "echo \"ulimit -c unlimited && ./lte-softmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE --rfsim --noS1\" > ./my-lte-softmodem-run.sh " >> $1
+        echo "echo \"ulimit -c unlimited && ./lte-softmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE --rfsim --log_config.global_log_options level,nocolor --noS1\" > ./my-lte-softmodem-run.sh " >> $1
     else
-        echo "echo \"ulimit -c unlimited && ./lte-softmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE --rfsim\" > ./my-lte-softmodem-run.sh " >> $1
+        echo "echo \"ulimit -c unlimited && ./lte-softmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE --rfsim --log_config.global_log_options level,nocolor \" > ./my-lte-softmodem-run.sh " >> $1
     fi
     echo "chmod 775 ./my-lte-softmodem-run.sh" >> $1
     echo "cat ./my-lte-softmodem-run.sh" >> $1
@@ -1028,9 +1028,9 @@ function start_rf_sim_ue {
     echo "cd /home/ubuntu/tmp/cmake_targets/lte_build_oai/build/" >> $1
     if [ $LOC_S1_CONFIGURATION -eq 0 ]
     then
-        echo "echo \"ulimit -c unlimited && ./lte-uesoftmodem -C ${LOC_FREQUENCY}000000 -r $LOC_PRB --nokrnmod 1 --rfsim --noS1\" > ./my-lte-softmodem-run.sh " >> $1
+        echo "echo \"ulimit -c unlimited && ./lte-uesoftmodem -C ${LOC_FREQUENCY}000000 -r $LOC_PRB --nokrnmod 1 --rfsim --log_config.global_log_options level,nocolor --noS1\" > ./my-lte-softmodem-run.sh " >> $1
     else
-        echo "echo \"ulimit -c unlimited && ./lte-uesoftmodem -C ${LOC_FREQUENCY}000000 -r $LOC_PRB --nokrnmod 1 --rfsim\" > ./my-lte-softmodem-run.sh " >> $1
+        echo "echo \"ulimit -c unlimited && ./lte-uesoftmodem -C ${LOC_FREQUENCY}000000 -r $LOC_PRB --nokrnmod 1 --rfsim --log_config.global_log_options level,nocolor\" > ./my-lte-softmodem-run.sh " >> $1
     fi
     echo "chmod 775 ./my-lte-softmodem-run.sh" >> $1
     echo "cat ./my-lte-softmodem-run.sh" >> $1

ci-scripts/xml_files/if4p5_usrp210_band40_build.xml

@@ -34,7 +34,7 @@
 	<testCase id="010101">
 		<class>Build_eNB</class>
 		<desc>Build eNB (USRP -- Ethernet Fronthaul)</desc>
-		<Build_eNB_args>-t ETHERNET -w USRP -c --eNB</Build_eNB_args>
+		<Build_eNB_args>-w USRP -c --eNB</Build_eNB_args>
 	</testCase>
 
         <testCase id="050101">

ci-scripts/xml_files/if4p5_usrp210_band7_build.xml

@@ -34,7 +34,7 @@
 	<testCase id="010101">
 		<class>Build_eNB</class>
 		<desc>Build eNB (USRP -- Ethernet Fronthaul)</desc>
-		<Build_eNB_args>-t ETHERNET -w USRP -c --eNB</Build_eNB_args>
+		<Build_eNB_args>-w USRP -c --eNB</Build_eNB_args>
 	</testCase>
 
         <testCase id="050101">

cmake_targets/CMakeLists.txt

@@ -241,16 +241,12 @@ add_boolean_option(DEBUG_MAC_INTERFACE False "print MAC-RLC PDU exchange to stdo
 add_boolean_option(TRACE_RLC_PAYLOAD   False "print RLC PDU to stdout") # if true, make sure that global and PDCP log levels are trace
 add_boolean_option(TEST_OMG            False "???")
 add_boolean_option(DEBUG_OMG           False "???")
-add_boolean_option(XFORMS              False "This adds the possibility to see the signal oscilloscope")
 add_boolean_option(PRINT_STATS         False "This adds the possibility to see the status")
 add_boolean_option(T_TRACER            True  "Activate the T tracer, a debugging/monitoring framework" )
 add_boolean_option(UE_AUTOTEST_TRACE   False "Activate UE autotest specific logs")
 add_boolean_option(UE_DEBUG_TRACE      False "Activate UE debug trace")
 add_boolean_option(UE_TIMING_TRACE     False "Activate UE timing trace")
-add_boolean_option(DISABLE_LOG_X       False "Deactivate all LOG_* macros")
 add_boolean_option(USRP_REC_PLAY       False "Enable USRP record playback mode")
-#add_boolean_option(UE_NAS_USE_TUN      False "Enable UE NAS TUN device instead of ue_ip.ko")
-add_boolean_option(BASIC_SIMULATOR     False "Has to be True when building the basic simulator, False otherwise")
 
 add_boolean_option(DEBUG_CONSOLE False "makes debugging easier, disables stdout/stderr buffering")
 
@@ -1991,16 +1987,28 @@ endif()
 
 list(APPEND ATLAS_LIBRARIES lapack lapacke)
 
-if (${XFORMS})
+set(XFORMS_SOURCE
-  include_directories ("/usr/include/X11")
+  ${OPENAIR1_DIR}/PHY/TOOLS/lte_phy_scope.c
-  set(XFORMS_SOURCE
+  )
-    ${OPENAIR1_DIR}/PHY/TOOLS/lte_phy_scope.c
+set(XFORMS_ENB_SOURCE
-    )
+  ${OPENAIR1_DIR}/PHY/TOOLS/lte_enb_scope.c
-  set(XFORMS_SOURCE_SOFTMODEM
+  )
-    ${OPENAIR_TARGETS}/RT/USER/stats.c
+set(XFORMS_UE_SOURCE
-    )
+  ${OPENAIR1_DIR}/PHY/TOOLS/lte_ue_scope.c
-  set(XFORMS_LIBRARIES "forms")
+  )    
-endif (${XFORMS})
+set(XFORMS_SOURCE_SOFTMODEM
+  ${OPENAIR_TARGETS}/RT/USER/stats.c
+  )
+set(XFORMS_LIBRARIES "forms")
+
+
+set (XFORMSINTERFACE_SOURCE
+   ${OPENAIR1_DIR}/PHY/TOOLS/phy_scope_interface.c
+   )
+add_library(enbscope MODULE ${XFORMS_SOURCE} ${XFORMS_SOURCE_SOFTMODEM} ${XFORMS_ENB_SOURCE})
+add_library(uescope MODULE ${XFORMS_SOURCE} ${XFORMS_SOURCE_SOFTMODEM} ${XFORMS_UE_SOURCE})
+target_link_libraries(enbscope ${XFORMS_LIBRARIES})
+target_link_libraries(uescope ${XFORMS_LIBRARIES})
 
 set(CMAKE_MODULE_PATH "${OPENAIR_DIR}/cmake_targets/tools/MODULES" "${CMAKE_MODULE_PATH}")
 
@@ -2068,8 +2076,7 @@ add_executable(lte-softmodem
   ${OPENAIR_DIR}/common/utils/utils.c
   ${OPENAIR_DIR}/common/utils/system.c
   ${GTPU_need_ITTI}
-  ${XFORMS_SOURCE}
+  ${XFORMSINTERFACE_SOURCE}
-  ${XFORMS_SOURCE_SOFTMODEM}
   ${T_SOURCE}
   ${CONFIG_SOURCES}
   ${SHLIB_LOADER_SOURCES}
@@ -2112,50 +2119,10 @@ target_link_libraries(du_test
 )
 
 target_link_libraries (lte-softmodem ${LIBXML2_LIBRARIES})
-target_link_libraries (lte-softmodem pthread m ${CONFIG_LIBRARIES} rt crypt ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} sctp  ${XFORMS_LIBRARIES} ${PROTOBUF_LIB}  ${CMAKE_DL_LIBS} ${LIBYAML_LIBRARIES})
+target_link_libraries (lte-softmodem pthread m ${CONFIG_LIBRARIES} rt crypt ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} sctp ${PROTOBUF_LIB}  ${CMAKE_DL_LIBS} ${LIBYAML_LIBRARIES})
 target_link_libraries (lte-softmodem ${LIB_LMS_LIBRARIES})
 target_link_libraries (lte-softmodem ${T_LIB})
 
-# lte-softmodem-nos1 is both eNB and UE implementation
-###################################################
-add_executable(lte-softmodem-nos1
-  ${OPENAIR_TARGETS}/RT/USER/rt_wrapper.c
-  ${OPENAIR_TARGETS}/RT/USER/lte-enb.c
-  ${OPENAIR_TARGETS}/RT/USER/lte-ru.c
-  ${OPENAIR_TARGETS}/RT/USER/lte-softmodem.c
-  ${OPENAIR_TARGETS}/RT/USER/lte-softmodem-common.c
-  ${OPENAIR2_DIR}/ENB_APP/NB_IoT_interface.c
-  ${OPENAIR1_DIR}/SIMULATION/TOOLS/taus.c
-  ${OPENAIR_TARGETS}/COMMON/create_tasks.c
-  ${OPENAIR_TARGETS}/ARCH/COMMON/common_lib.c
-  ${OPENAIR2_DIR}/RRC/NAS/nas_config.c
-  ${OPENAIR2_DIR}/RRC/NAS/rb_config.c
-  ${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/netlink_init.c
-  ${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/multicast_link.c
-  ${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/socket.c
-  ${OPENAIR_DIR}/common/utils/utils.c
-  ${OPENAIR_DIR}/common/utils/system.c
-  ${GTPU_need_ITTI}
-  ${XFORMS_SOURCE}
-  ${XFORMS_SOURCE_SOFTMODEM}
-  ${T_SOURCE}
-  ${CONFIG_SOURCES}
-  ${SHLIB_LOADER_SOURCES}
-  )
-
-add_dependencies(lte-softmodem-nos1 rrc_flag s1ap_flag x2_flag)
-
-target_link_libraries (lte-softmodem-nos1
-  -Wl,--start-group
-  RRC_LIB F1AP F1AP_LIB S1AP_LIB S1AP_ENB X2AP_LIB X2AP_ENB GTPV1U SECU_CN SECU_OSA UTIL HASHTABLE SCTP_CLIENT UDP SCHED_LIB SCHED_RU_LIB PHY_COMMON PHY PHY_RU LFDS L2
-  ${MSC_LIB} ${RAL_LIB} ${NAS_UE_LIB} ${ITTI_LIB} ${FLPT_MSG_LIB} ${ASYNC_IF_LIB} ${FLEXRAN_AGENT_LIB} ${FSPT_MSG_LIB} ${PROTO_AGENT_LIB} LFDS7
-  NFAPI_COMMON_LIB NFAPI_LIB NFAPI_VNF_LIB NFAPI_PNF_LIB NFAPI_USER_LIB
-  -Wl,--end-group z dl)
-
-target_link_libraries (lte-softmodem-nos1 ${LIBXML2_LIBRARIES})
-target_link_libraries (lte-softmodem-nos1 pthread m ${CONFIG_LIBRARIES} rt crypt ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} sctp ${XFORMS_LIBRARIES} ${PROTOBUF_LIB} ${CMAKE_DL_LIBS} ${LIBYAML_LIBRARIES})
-target_link_libraries (lte-softmodem-nos1  ${LIB_LMS_LIBRARIES})
-target_link_libraries (lte-softmodem-nos1 ${T_LIB})
 # lte-uesoftmodem is  UE implementation
 #######################################
 
@@ -2177,8 +2144,7 @@ add_executable(lte-uesoftmodem
   ${OPENAIR3_DIR}/NAS/UE/nas_ue_task.c
   ${OPENAIR_DIR}/common/utils/utils.c
   ${OPENAIR_DIR}/common/utils/system.c
-  ${XFORMS_SOURCE}
+  ${XFORMSINTERFACE_SOURCE}
-  ${XFORMS_SOURCE_SOFTMODEM}
   ${T_SOURCE}
   ${CONFIG_SOURCES}
   ${SHLIB_LOADER_SOURCES}
@@ -2193,50 +2159,11 @@ target_link_libraries (lte-uesoftmodem
   -Wl,--end-group z dl)
 
 target_link_libraries (lte-uesoftmodem ${LIBXML2_LIBRARIES})
-target_link_libraries (lte-uesoftmodem pthread m ${CONFIG_LIBRARIES} rt crypt ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} sctp  ${XFORMS_LIBRARIES} ${PROTOBUF_LIB}  ${CMAKE_DL_LIBS} ${LIBYAML_LIBRARIES} ${ATLAS_LIBRARIES})
+target_link_libraries (lte-uesoftmodem pthread m ${CONFIG_LIBRARIES} rt crypt ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} sctp ${PROTOBUF_LIB}  ${CMAKE_DL_LIBS} ${LIBYAML_LIBRARIES} ${ATLAS_LIBRARIES})
 target_link_libraries (lte-uesoftmodem ${LIB_LMS_LIBRARIES})
 target_link_libraries (lte-uesoftmodem ${T_LIB})
 
-# lte-uesoftmodem-nos1 is UE implementation
-###################################################
-add_executable(lte-uesoftmodem-nos1
-  ${OPENAIR_TARGETS}/RT/USER/rt_wrapper.c
-  ${OPENAIR_TARGETS}/RT/USER/lte-ue.c
-  ${OPENAIR_TARGETS}/RT/USER/lte-uesoftmodem.c
-  ${OPENAIR_TARGETS}/RT/USER/lte-softmodem-common.c
-  ${OPENAIR_TARGETS}/RT/USER/lte-ru.c
-  ${OPENAIR_TARGETS}/RT/USER/rfsim.c
-  ${OPENAIR1_DIR}/SIMULATION/TOOLS/taus.c
-  ${OPENAIR_TARGETS}/COMMON/create_tasks_ue.c
-  ${OPENAIR_TARGETS}/ARCH/COMMON/common_lib.c
-  ${OPENAIR2_DIR}/RRC/NAS/nas_config.c
-  ${OPENAIR2_DIR}/RRC/NAS/rb_config.c
-  ${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/netlink_init.c
-  ${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/multicast_link.c
-  ${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/socket.c
-  ${OPENAIR3_DIR}/NAS/UE/nas_ue_task.c
-  ${OPENAIR_DIR}/common/utils/utils.c
-  ${OPENAIR_DIR}/common/utils/system.c
-  ${XFORMS_SOURCE}
-  ${XFORMS_SOURCE_SOFTMODEM}
-  ${T_SOURCE}
-  ${CONFIG_SOURCES}
-  ${SHLIB_LOADER_SOURCES}
-  )
 
-add_dependencies(lte-uesoftmodem-nos1 rrc_flag s1ap_flag x2_flag)
-
-target_link_libraries (lte-uesoftmodem-nos1
-  -Wl,--start-group
-  RRC_LIB S1AP_LIB S1AP_ENB X2AP_LIB X2AP_ENB F1AP F1AP_LIB GTPV1U SECU_CN SECU_OSA UTIL HASHTABLE SCTP_CLIENT UDP SCHED_RU_LIB SCHED_UE_LIB PHY_COMMON PHY_UE PHY_RU LFDS L2_UE SIMU
-  ${MSC_LIB} ${RAL_LIB} ${NAS_UE_LIB} ${ITTI_LIB} ${FLPT_MSG_LIB} ${ASYNC_IF_LIB} LFDS7 ${ATLAS_LIBRARIES}
-  NFAPI_COMMON_LIB NFAPI_LIB NFAPI_PNF_LIB NFAPI_USER_LIB
-  -Wl,--end-group z dl)
-
-target_link_libraries (lte-uesoftmodem-nos1 ${LIBXML2_LIBRARIES})
-target_link_libraries (lte-uesoftmodem-nos1 pthread m ${CONFIG_LIBRARIES} rt crypt ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} sctp  ${XFORMS_LIBRARIES} ${PROTOBUF_LIB} ${CMAKE_DL_LIBS} ${LIBYAML_LIBRARIES} ${ATLAS_LIBRARIES})
-target_link_libraries (lte-uesoftmodem-nos1  ${LIB_LMS_LIBRARIES})
-target_link_libraries (lte-uesoftmodem-nos1 ${T_LIB})
 # USIM process
 #################
 #add_executable(usim
@@ -2276,7 +2203,7 @@ add_executable(dlsim_tm4
   )
 target_link_libraries (dlsim_tm4
   -Wl,--start-group SIMU UTIL SCHED_LIB SCHED_RU_LIB PHY LFDS ${ITTI_LIB} -Wl,--end-group
-  pthread m rt ${CONFIG_LIBRARIES} ${ATLAS_LIBRARIES} ${XFORMS_LIBRARIES} ${T_LIB}
+  pthread m rt ${CONFIG_LIBRARIES} ${ATLAS_LIBRARIES} ${T_LIB}
   )
 
 foreach(myExe dlsim dlsim_tm7 ulsim pbchsim scansim mbmssim pdcchsim pucchsim prachsim syncsim)
@@ -2292,7 +2219,7 @@ foreach(myExe dlsim dlsim_tm7 ulsim pbchsim scansim mbmssim pdcchsim pucchsim pr
   target_link_libraries (${myExe}
 
     -Wl,--start-group SIMU UTIL SCHED_LIB SCHED_RU_LIB SCHED_UE_LIB PHY_COMMON PHY PHY_UE PHY_RU LFDS ${ITTI_LIB} LFDS7 -Wl,--end-group
-    pthread m rt ${CONFIG_LIBRARIES} ${ATLAS_LIBRARIES} ${XFORMS_LIBRARIES} ${T_LIB} dl
+    pthread m rt ${CONFIG_LIBRARIES} ${ATLAS_LIBRARIES}  ${XFORMS_LIBRARIES} ${T_LIB} dl
     )
 endforeach(myExe)
 
@@ -2356,7 +2283,7 @@ endforeach(myExe)
 if (${T_TRACER})
   foreach(i
         #all "add_executable" definitions (except tests, rb_tool, updatefw)
-        lte-softmodem lte-softmodem-nos1 lte-uesoftmodem lte-uesoftmodem-nos1
+        lte-softmodem lte-uesoftmodem 
         dlsim_tm4 dlsim dlsim_tm7 ulsim pbchsim scansim mbmssim
         pdcchsim pucchsim prachsim syncsim ulsim cu_test du_test
         #all "add_library" definitions

cmake_targets/build_oai

@@ -52,7 +52,6 @@ CPU_AFFINITY_FLAG_USER="False" #Only valid when lowlatecy flag is set to False
 REL="Rel14"
 HW="None"
 TP="None"
-NOS1=0
 EPC=0
 VERBOSE_COMPILE=0
 CFLAGS_PROCESSOR_USER=""
@@ -66,11 +65,9 @@ CMAKE_CMD="$CMAKE"
 UE_AUTOTEST_TRACE="False"
 UE_DEBUG_TRACE="False"
 UE_TIMING_TRACE="False"
-DISABLE_LOG_X="False"
 USRP_REC_PLAY="False"
 BUILD_ECLIPSE=0
-UE_NAS_USE_TUN="False"
+OPTIONAL_LIBRARIES="telnetsrv enbscope uescope msc"
-BASIC_SIMULATOR=0
 trap handle_ctrl_c INT
 
 function print_help() {
@@ -110,11 +107,8 @@ Options
    Rel8 limits the implementation to 3GPP Release 8 version
    Rel10 limits the implementation to 3GPP Release 10 version
 -w | --hardware
-   EXMIMO, USRP, BLADERF, ETHERNET, LMSSDR, IRIS, None (Default)
+   EXMIMO, USRP, BLADERF, LMSSDR, IRIS, None (Default)
    Adds this RF board support (in external packages installation and in compilation)
--t | --transport protocol
-   ETHERNET , None
-   Adds this trasport protocol support in compilation
 --phy_simulators
    Makes the unitary tests Layer 1 simulators
 --core_simulators
@@ -125,13 +119,9 @@ Options
    runs only specified test cases specified here. This flag is only valid with -s
 -V | --vcd
    Adds a debgging facility to the binary files: GUI with major internal synchronization events
--x | --xforms
-   Adds a software oscilloscope feature to the produced binaries. 
 --install-system-files
    Install OpenArInterface required files in Linux system
    (will ask root password)
---noS1 
-   Compiles lte-softmodem without S1 interface, using direct link to IP instead
 --verbose-compile
    Shows detailed compilation instructions in makefile
 --cflags_processor
@@ -154,29 +144,18 @@ Options
     Enable traces for UE debugging
 --ue-timing
     Enable traces for timing
---disable-log
-   Disable all LOG_* macros
 --build-eclipse
    Build eclipse project files. Paths are auto corrected by fixprj.sh
---build-telnet
+--build-lib <libraries>
-   Build telnet server, specify --telnetsrv on command line to start it (eNB only)
+   Build optional shared library, <libraries> can be one or several of $OPTIONAL_LIBRARIES
---build-msc
-   Build MSC tracing utility, specify --msc on command line to start it (eNB and UE)
 --usrp-recplay
    Build for I/Q record-playback modes
---ue-nas-use-tun
+
-   Use TUN devices for the UEs instead of ue_ip.ko
---basic-simulator
-   Generates a basic [1 UE + 1 eNB + no channel] simulator.
-   See targets/ARCH/tcp_bridge/README.tcp_bridge_oai for documentation.
---rfsimulator
-   Generate virtual RF driver
-   to use it, set the environement variable RFSIMULATOR to \"enb\" in the eNB and to the eNB IP address in the UEs
 Usage (first build):
- NI/ETTUS B201  + COTS UE : ./build_oai -I  --eNB -x --install-system-files -w USRP
+ NI/ETTUS B201  + COTS UE : ./build_oai -I  --eNB --install-system-files -w USRP
 Usage (Regular):
- Eurecom EXMIMO + OAI ENB : ./build_oai --eNB -x 
+ Eurecom EXMIMO + OAI ENB : ./build_oai --eNB  
- NI/ETTUS B201  + OAI ENB : ./build_oai --eNB -x -w USRP"
+ NI/ETTUS B201  + OAI ENB : ./build_oai --eNB -w USRP"
 }
 
 
@@ -255,14 +234,6 @@ function main() {
                 esac
 		echo_info "Setting hardware to: $HW"
             shift 2;;
-	-t | --transport_protocol)
-            TP="$2" #"${i#*=}"
-	    if [ "$TP" != "ETHERNET" -a "$TP" != "None" ] ; then 
-		echo_fatal "Unknown TP type $TP will exit..."		
-	    else
-		echo_info "Setting transport protocol to: $TP"		
-	    fi
-            shift 2;;
        --phy_simulators)
             SIMUS_PHY=1
             echo_info "Will compile dlsim, ulsim, ..."
@@ -286,7 +257,7 @@ function main() {
             EXE_ARGUMENTS="$EXE_ARGUMENTS -V"
             shift;;
        -x | --xforms)
-            XFORMS="True"
+            XFORMS=1
             EXE_ARGUMENTS="$EXE_ARGUMENTS -d"
             echo_info "Will generate the software oscilloscope features"
             shift;;
@@ -294,10 +265,6 @@ function main() {
             INSTALL_SYSTEM_FILES=1
             echo_info "Will copy OpenAirInterface files in Linux directories"
             shift;;
-       --noS1)
-	    NOS1=1
-            echo_info "Will compile without S1 interface"
-            shift;;
        --verbose-compile)
 	    VERBOSE_COMPILE=1
             echo_info "Will compile with verbose instructions"
@@ -340,11 +307,7 @@ function main() {
             shift 1;;
         --ue-timing)
             UE_TIMING_TRACE="True"
-            echo_info "Enabling UE timing trace"
+ x           echo_info "Enabling UE timing trace"
-            shift 1;;
-        --disable-log)
-            DISABLE_LOG_X="True"
-            echo_info "Disabling all LOG_* traces"
             shift 1;;
         --uhd-images-dir)
             UHD_IMAGES_DIR=$2
@@ -355,30 +318,24 @@ function main() {
             CMAKE_CMD="$CMAKE_CMD"' -DCMAKE_ECLIPSE_GENERATE_SOURCE_PROJECT=TRUE -G"Eclipse CDT4 - Unix Makefiles"'
             echo_info "Enabling build eclipse project support"
             shift 1;;
-       --build-telnetsrv)
+       --build-lib) 
-            BUILD_TELNETSRV=1
+            BUILD_OPTLIB="" 
-            echo_info "Build embedded telnet server"
+            for alib in $2 ; do 
-            shift ;;
+                for oklib in $OPTIONAL_LIBRARIES ; do
-       --build-msc)
+                     if [ "$alib" = "$oklib" ] ; then
-            MSC_GEN=1
+                        BUILD_OPTLIB="$BUILD_OPTLIB $alib" 
-            echo_info "Build MSC tracing utility"
+                        echo_info "Enabling build of lib${alib}.so" 
-            shift ;;			
+                     fi   
+                done
+            done
+	    if [ "${BUILD_OPTLIB## }" != "$2" ] ; then
+               echo_fatal "Unknown optional library in $2, valid libraries are $OPTIONAL_LIBRARIES" 
+            fi
+            shift 2;;		
         --usrp-recplay)
             USRP_REC_PLAY="True"
             echo_info "Enabling USRP record playback mode"
             shift 1;;
-        --ue-nas-use-tun)
-            UE_NAS_USE_TUN="True"
-            echo_info "Enabling UE NAS TUN device usage instead of ue_ip.ko"
-            shift 1;;
-        --basic-simulator)
-            BASIC_SIMULATOR=1
-            echo_info "Compiling the basic simulator"
-            shift 1;;
-	--rfsimulator)
-	    RFSIMULATOR=true
-	    echo_info "Compiling the RF simulator"
-	    shift 1;;
         -h | --help)
             print_help
             exit 1;;
@@ -398,7 +355,7 @@ function main() {
   
   if [ "$eNB" = "1" ] ; then
       if [ "$HW" = "None" -a  "$TP" = "None" ] ; then
-	  echo_fatal "Define a local radio head (e.g. -w EXMIMO) or a transport protocol (e.g. -t ETHERNET) to communicate with a remote radio head!"
+	  echo_info "No local radio head and no transport protocol selected"
       fi
       if [ "$HW" = "None" ] ; then 
 	  echo_info "No radio head has been selected (HW set to $HW)"	
@@ -504,15 +461,10 @@ function main() {
     if [ "$T_TRACER" =  "False" ] ; then
         noLOGDirsuffix="_noLOG"
       fi
-    if [ "$NOS1" =  "1" ] ; then
+    lte_build_dir=lte_build_oai
-        noS1Dir="_noS1"
+      bin_suffix=""
-        bin_suffix="-nos1"
-  else
-      lte_build_dir=lte_build_oai
-        bin_suffix=""
-  fi
 
-    lte_build_dir="lte${noS1Dir}_build_oai${noLOGDirsuffix}"
+    lte_build_dir="lte_build_oai${noLOGDirsuffix}"
 # configuration module libraries, one currently available, using libconfig 
   config_libconfig_shlib=params_libconfig
   
@@ -524,12 +476,8 @@ function main() {
     mkdir -p $DIR/$lte_build_dir/build
     cmake_file=$DIR/$lte_build_dir/CMakeLists.txt
     echo "cmake_minimum_required(VERSION 2.8)"   >  $cmake_file
-#    if [ "$NOS1" = "1" ] ; then
-#	cat  $DIR/$lte_build_dir/CMakeLists.template >>  $cmake_file
-#    fi
     echo "set ( CMAKE_BUILD_TYPE $CMAKE_BUILD_TYPE )" >> $cmake_file
     echo "set ( CFLAGS_PROCESSOR_USER \"$CFLAGS_PROCESSOR_USER\" )" >>  $cmake_file
-    echo "set ( XFORMS $XFORMS )"                  >>  $cmake_file
     echo "set ( UE_EXPANSION $UE_EXPANSION )"      >>  $cmake_file
 #    echo "set ( PHY_TX_THREAD $UE_EXPANSION )"     >>  $cmake_file
     echo "set ( PRE_SCD_THREAD $UE_EXPANSION )"    >>  $cmake_file
@@ -545,13 +493,7 @@ function main() {
     echo "set (UE_AUTOTEST_TRACE $UE_AUTOTEST_TRACE)"        >>  $cmake_file
     echo "set (UE_DEBUG_TRACE $UE_DEBUG_TRACE)"        >>  $cmake_file
     echo "set (UE_TIMING_TRACE $UE_TIMING_TRACE)"        >>  $cmake_file
-    echo "set (DISABLE_LOG_X $DISABLE_LOG_X)"        >>  $cmake_file
     echo "set (USRP_REC_PLAY $USRP_REC_PLAY)"        >>  $cmake_file
-    if [ "$UE" = 1 -a "$NOS1" = "0" ] ; then
-     echo_info "Compiling UE S1 build : enabling Linux and NETLINK"
-     echo "set (LINUX True )"              >>  $cmake_file
-     echo "set (PDCP_USE_NETLINK True )"   >>  $cmake_file
-    fi
     echo 'include(${CMAKE_CURRENT_SOURCE_DIR}/../CMakeLists.txt)' >> $cmake_file
     cd  $DIR/$lte_build_dir/build
     eval $CMAKE_CMD
@@ -570,46 +512,41 @@ function main() {
     compilations \
           $lte_build_dir coding \
           libcoding.so $dbin/libcoding.so
-	  
+# optional libs (used when noS1 with kernel modules 
-    if [ "$NOS1" = "1" ] ; then
+    compilations \
-	compilations \
+          $lte_build_dir nasmesh \
-	    $lte_build_dir nasmesh \
+          CMakeFiles/nasmesh/nasmesh.ko $dbin/nasmesh.ko
-	    CMakeFiles/nasmesh/nasmesh.ko $dbin/nasmesh.ko
+    compilations \
-	compilations \
+          $lte_build_dir rb_tool \
-	    $lte_build_dir rb_tool \
+          rb_tool $dbin/rb_tool
-	    rb_tool $dbin/rb_tool
+          cp $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 $dbin	  
-	cp $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 $dbin
-    fi
   fi
 
   if [ "$UE" = 1  ] ; then
-        lte_exec=lte-uesoftmodem${bin_suffix}
+    lte_exec=lte-uesoftmodem${bin_suffix}
-        compilations \
-            $lte_build_dir $lte_exec \
-            $lte_exec $dbin/$lte_exec.$REL
-        
-        # mandatory shared lib
-        compilations \
-            $lte_build_dir $config_libconfig_shlib \
-            lib$config_libconfig_shlib.so $dbin/lib$config_libconfig_shlib.so
-        compilations \
-            $lte_build_dir coding \
-            libcoding.so $dbin/libcoding.so
-        
-        if [ "$NOS1" = "1" ] ; then
-            compilations \
-                $lte_build_dir nasmesh \
-                CMakeFiles/nasmesh/nasmesh.ko $dbin/nasmesh.ko
-            compilations \
-                $lte_build_dir rb_tool \
-                rb_tool $dbin/rb_tool
-            cp $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 $dbin
-        else        
-    # ue_ip driver compilation
-    echo_info "Compiling UE specific part"
     compilations \
-      $lte_build_dir ue_ip \
+        $lte_build_dir $lte_exec \
-      CMakeFiles/ue_ip/ue_ip.ko $dbin/ue_ip.ko
+        $lte_exec $dbin/$lte_exec.$REL
+        
+    # mandatory shared lib
+    compilations \
+        $lte_build_dir $config_libconfig_shlib \
+        lib$config_libconfig_shlib.so $dbin/lib$config_libconfig_shlib.so
+    compilations \
+        $lte_build_dir coding \
+        libcoding.so $dbin/libcoding.so
+# optional libs (used when noS1 with kernel modules
+    compilations \
+          $lte_build_dir nasmesh \
+          CMakeFiles/nasmesh/nasmesh.ko $dbin/nasmesh.ko
+    compilations \
+          $lte_build_dir rb_tool \
+          rb_tool $dbin/rb_tool
+          cp $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1 $dbin
+    # ue_ip driver compilation
+    compilations \
+          $lte_build_dir ue_ip \
+          CMakeFiles/ue_ip/ue_ip.ko $dbin/ue_ip.ko
 
 #    mkdir -p $DIR/at_commands/build
 #    cd $DIR/at_commands/build
@@ -644,7 +581,6 @@ function main() {
       echo_warning "not generated UE NAS files: binaries not found"
     fi
   fi
-    fi
 
   if [ "$SIMUS_PHY" = "1" -o "$SIMUS_CORE" = "1" ] ; then
     cd $OPENAIR_DIR/cmake_targets/lte-simulators
@@ -708,23 +644,17 @@ function main() {
     fi
     cp $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 $dbin
   fi
-
+  # optional libraries
-  # Telnet server compilation
   #####################
-  if [ "$BUILD_TELNETSRV" = "1" ] ; then
+  if [ ! -z "$BUILD_OPTLIB" ] ; then 
-              compilations \
+     for oklib in $BUILD_OPTLIB ; do
-            $lte_build_dir telnetsrv \
+         compilations \
-                  libtelnetsrv.so $dbin/libtelnetsrv.so
+            $lte_build_dir $oklib \
+                  lib${oklib}.so $dbin/lib${oklib}.so
+     done
 
   fi 
-    # msc library compilation
-  #####################
-  if [ "$MSC_GEN" = "1" ] ; then
-              compilations \
-            $lte_build_dir msc \
-                  libmsc.so $dbin/libmsc.so
  
-  fi  
   # build RF device and transport protocol libraries
   #####################################
   if [ "$eNB" = "1" -o "$UE" = "1" ] ; then
@@ -854,123 +784,6 @@ function main() {
     echo_info "10. Bypassing the Tests ..."
   fi
 
-  # basic simulator
-  #####################
-  if [ "$BASIC_SIMULATOR" = "1" ]; then
-    echo_info "Build basic simulator"
-    [ "$CLEAN" = "1" ] && rm -rf $OPENAIR_DIR/cmake_targets/basic_simulator
-    [ "$CLEAN" = "1" ] && rm -rf $OPENAIR_DIR/cmake_targets/nas_sim_tools/build
-    mkdir -p $OPENAIR_DIR/cmake_targets/basic_simulator
-    mkdir -p $OPENAIR_DIR/cmake_targets/basic_simulator/enb
-    mkdir -p $OPENAIR_DIR/cmake_targets/basic_simulator/ue
-    mkdir -p $OPENAIR_DIR/cmake_targets/nas_sim_tools/build
-
-    # enb
-
-    cmake_file=$OPENAIR_DIR/cmake_targets/basic_simulator/enb/CMakeLists.txt
-    echo "cmake_minimum_required(VERSION 2.8)"         >  $cmake_file
-    echo "set ( CMAKE_BUILD_TYPE $CMAKE_BUILD_TYPE )"  >> $cmake_file
-    echo "set ( CFLAGS_PROCESSOR_USER \"$CFLAGS_PROCESSOR_USER\" )" >>  $cmake_file
-    echo "set ( RRC_ASN1_VERSION \"${REL}\")"          >>  $cmake_file
-    echo "set ( ENABLE_VCD_FIFO $VCD_TIMING )"         >>  $cmake_file
-    echo "set ( XFORMS $XFORMS )"                      >>  $cmake_file
-    echo "set ( RF_BOARD \"OAI_USRP\")"                >>  $cmake_file
-    echo "set ( TRANSP_PRO \"None\")"                  >>  $cmake_file
-    echo "set(PACKAGE_NAME \"simulator_enb\")"         >>  $cmake_file
-    echo "set (DEADLINE_SCHEDULER \"False\" )"         >>  $cmake_file
-    echo "set (CPU_AFFINITY \"False\" )"               >>  $cmake_file
-    echo "set ( T_TRACER \"True\" )"                   >>  $cmake_file
-    echo "set (UE_AUTOTEST_TRACE $UE_AUTOTEST_TRACE)"  >>  $cmake_file
-    echo "set (UE_DEBUG_TRACE $UE_DEBUG_TRACE)"        >>  $cmake_file
-    echo "set (UE_TIMING_TRACE $UE_TIMING_TRACE)"      >>  $cmake_file
-    echo "set (DISABLE_LOG_X $DISABLE_LOG_X)"          >>  $cmake_file
-    echo "set (USRP_REC_PLAY $USRP_REC_PLAY)"          >>  $cmake_file
-    echo "set (BASIC_SIMULATOR \"True\" )"             >>  $cmake_file
-    echo 'include(${CMAKE_CURRENT_SOURCE_DIR}/../../CMakeLists.txt)' >> $cmake_file
-
-    echo_info "Build eNB"
-    echo_info "logs are in $dlog/basic_simulator_enb.txt"
-    set +e
-    {
-      cd $OPENAIR_DIR/cmake_targets/basic_simulator/enb
-      cmake .
-      make -j`nproc` lte-softmodem
-      make -j`nproc` coding params_libconfig tcp_bridge_oai
-      ln -sf libtcp_bridge_oai.so liboai_device.so
-      cd ../..
-    } > $dlog/basic_simulator_enb.txt 2>&1
-    set -e
-    if [ -s $OPENAIR_DIR/cmake_targets/basic_simulator/enb/lte-softmodem          -a \
-         -s $OPENAIR_DIR/cmake_targets/basic_simulator/enb/libcoding.so           -a \
-         -s $OPENAIR_DIR/cmake_targets/basic_simulator/enb/libparams_libconfig.so -a \
-         -s $OPENAIR_DIR/cmake_targets/basic_simulator/enb/libtcp_bridge_oai.so ] ; then
-      echo_success "eNB compiled"
-      check_warnings "$dlog/basic_simulator_enb.txt"
-    else
-      echo_error "eNB compilation failed"
-      exit 1
-    fi
-
-    # ue
-
-    echo_info "Compile conf2uedata"
-    cd $OPENAIR_DIR/cmake_targets/nas_sim_tools/build
-    eval $CMAKE_CMD
-    compilations \
-        nas_sim_tools conf2uedata \
-        conf2uedata $dbin/conf2uedata
-
-    cmake_file=$OPENAIR_DIR/cmake_targets/basic_simulator/ue/CMakeLists.txt
-    echo "cmake_minimum_required(VERSION 2.8)"        >  $cmake_file
-    echo "set ( CMAKE_BUILD_TYPE $CMAKE_BUILD_TYPE )" >> $cmake_file
-    echo "set ( CFLAGS_PROCESSOR_USER \"$CFLAGS_PROCESSOR_USER\" )" >>  $cmake_file
-    echo "set ( RRC_ASN1_VERSION \"${REL}\")"         >>  $cmake_file
-    echo "set ( ENABLE_VCD_FIFO $VCD_TIMING )"        >>  $cmake_file
-    echo "set ( XFORMS $XFORMS )"                     >>  $cmake_file
-    echo "set ( RF_BOARD \"OAI_USRP\")"               >>  $cmake_file
-    echo "set ( TRANSP_PRO \"None\")"                 >>  $cmake_file
-    echo "set(PACKAGE_NAME \"simulator_ue\")"         >>  $cmake_file
-    echo "set (DEADLINE_SCHEDULER \"False\" )"        >>  $cmake_file
-    echo "set (CPU_AFFINITY \"False\" )"              >>  $cmake_file
-    echo "set ( T_TRACER \"True\" )"                  >>  $cmake_file
-    echo "set (UE_AUTOTEST_TRACE $UE_AUTOTEST_TRACE)" >>  $cmake_file
-    echo "set (UE_DEBUG_TRACE $UE_DEBUG_TRACE)"       >>  $cmake_file
-    echo "set (UE_TIMING_TRACE $UE_TIMING_TRACE)"     >>  $cmake_file
-    echo "set (DISABLE_LOG_X $DISABLE_LOG_X)"         >>  $cmake_file
-    echo "set (USRP_REC_PLAY $USRP_REC_PLAY)"         >>  $cmake_file
-    echo "set (LINUX True )"                          >>  $cmake_file
-    echo "set (PDCP_USE_NETLINK True )"               >>  $cmake_file
-    echo "set (BASIC_SIMULATOR \"True\" )"            >>  $cmake_file
-#    echo "set (UE_NAS_USE_TUN \"True\" )"             >>  $cmake_file
-    echo 'include(${CMAKE_CURRENT_SOURCE_DIR}/../../CMakeLists.txt)' >> $cmake_file
-
-    echo_info "Build UE"
-    echo_info "logs are in $dlog/basic_simulator_ue.txt"
-    set +e
-    {
-      cd $OPENAIR_DIR/cmake_targets/basic_simulator/ue
-      cmake .
-      make -j`nproc` lte-uesoftmodem
-      make -j`nproc` coding params_libconfig tcp_bridge_oai
-      ln -sf libtcp_bridge_oai.so liboai_device.so
-      cd ../..
-    } > $dlog/basic_simulator_ue.txt 2>&1
-    set -e
-    if [ -s $OPENAIR_DIR/cmake_targets/basic_simulator/ue/lte-uesoftmodem -a \
-         -s $OPENAIR_DIR/cmake_targets/basic_simulator/ue/libcoding.so -a \
-         -s $OPENAIR_DIR/cmake_targets/basic_simulator/ue/libparams_libconfig.so -a \
-         -s $OPENAIR_DIR/cmake_targets/basic_simulator/ue/libtcp_bridge_oai.so ] ; then
-      echo_success "UE compiled"
-      check_warnings "$dlog/basic_simulator_ue.txt"
-    else
-      echo_error "UE compilation failed"
-      exit 1
-    fi
-
-    echo_info "Generate UE SIM data"
-    $OPENAIR_DIR/targets/bin/conf2uedata -c $OPENAIR_DIR/openair3/NAS/TOOLS/ue_eurecom_test_sfr.conf -o $OPENAIR_DIR/cmake_targets/basic_simulator/ue
-
-  fi
 }
 
 main "$@"

common/utils/LOG/log.h

@@ -481,10 +481,10 @@ static inline void printMeas(char *txt, Meas *M, int period) {
             M->iterations,
             M->maxArray[1],M->maxArray[2], M->maxArray[3],M->maxArray[4], M->maxArray[5],
             M->maxArray[6],M->maxArray[7], M->maxArray[8],M->maxArray[9],M->maxArray[10]);
-#if DISABLE_LOG_X
+#if T_TRACER
-    printf("%s",txt2);
+    LOG_W(PHY,"%s",txt2);
 #else
-    LOG_W(PHY, "%s",txt2);
+    printf("%s",txt2);
 #endif
   }
 }

common/utils/telnetsrv/DOC/telnetmeasur.md

@@ -0,0 +1,54 @@
+measur command can be used to get cpu usage or signal processing statistics from a running eNB instance.
+
+
+Measurments can be displayed by groups, the list of available groups can be retrieved using the `measur show groups` command.
+```bash
+softmodem> measur show groups
+                           name       type 
+00                           enb   ltestats 
+01                        enbues   ltestats 
+02                           rlc   ltestats 
+03                        phycpu   cpustats 
+04                        maccpu   cpustats 
+05                       pdcpcpu   cpustats 
+softmodem>
+```
+By default the oai softmodem doesn't compute cpu usage measurments, a specific command allows to enable them.
+```bash
+softmodem> measur cpustats enable
+softmodem> measur show phycpu
+--------------------------------- cpu (4 GHz) measurements: PHY (cpustats enabled) ---------------------------------
+00                   phy_proc_tx:           40.217 us;             178   | 01                   phy_proc_rx:            0.000 us;               0 |
+02                      rx_prach:           40.123 us;               9   | 03                      ofdm_mod:            0.000 us;               0 |
+04          dlsch_common_and_dci:           39.311 us;             178   | 05             dlsch_ue_specific:            0.878 us;             178 |
+06                dlsch_encoding:            5.667 us;              11   | 07              dlsch_modulation:            5.398 us;              11 |
+08              dlsch_scrambling:            1.398 us;              11   | 09           dlsch_rate_matching:            1.367 us;              11 |
+10        dlsch_turbo_encod_prep:            0.000 us;               0   | 11        dlsch_turbo_encod_segm:            0.000 us;               0 |
+12             dlsch_turbo_encod:            2.408 us;              11   | 13     dlsch_turbo_encod_waiting:            0.000 us;               0 |
+14      dlsch_turbo_encod_signal:            0.000 us;               0   | 15        dlsch_turbo_encod_main:            0.000 us;               0 |
+16     dlsch_turbo_encod_wakeup0:            0.000 us;               0   | 17     dlsch_turbo_encod_wakeup1:            0.000 us;               0 |
+18            dlsch_interleaving:            0.503 us;              11   | 19                        rx_dft:            0.000 us;               0 |
+20      ulsch_channel_estimation:            0.000 us;               0   | 21  ulsch_freq_offset_estimation:            0.000 us;               0 |
+22                ulsch_decoding:            0.000 us;               0   | 23            ulsch_demodulation:            0.000 us;               0 |
+24         ulsch_rate_unmatching:            0.000 us;               0   | 25          ulsch_turbo_decoding:            0.000 us;               0 |
+26          ulsch_deinterleaving:            0.000 us;               0   | 27          ulsch_demultiplexing:            0.000 us;               0 |
+softmodem> measur cpustats disable
+```
+
+signal processing statistics are always available.
+```bash
+softmodem>  measur show enb   
+--------------------------------- eNB 0 mac stats CC 0 frame 68 ---------------------------------
+           total_num_bcch_pdu =              44                     bcch_buffer =              17               total_bcch_buffer =             937
+                     bcch_mcs =               2              total_num_ccch_pdu =               0                     ccch_buffer =               0
+            total_ccch_buffer =               0                        ccch_mcs =               0              total_num_pcch_pdu =               0
+                  pcch_buffer =               0               total_pcch_buffer =               0                        pcch_mcs =               0
+             num_dlactive_UEs =               0                  available_prbs =              25            total_available_prbs =           16924
+              available_ncces =               0                   dlsch_bitrate =               0                  dlsch_bytes_tx =               0
+                dlsch_pdus_tx =               0             total_dlsch_bitrate =               0            total_dlsch_bytes_tx =               0
+          total_dlsch_pdus_tx =               0                   ulsch_bitrate =               0                  ulsch_bytes_rx =               0
+                ulsch_pdus_rx =               0             total_ulsch_bitrate =               0            total_ulsch_bytes_rx =               0
+          total_ulsch_pdus_rx =               0                 sched_decisions =               0                missed_deadlines =               0
+```
+[oai telnetserver home](telnetsrv.md)
+[oai telnetserver usage home](telnetusage.md)

common/utils/telnetsrv/DOC/telnetusage.md

@@ -5,7 +5,7 @@ By default the embedded telnet server, which is implemented in a shared library,
  cd \<oai repository\>/openairinterface5g
  source oaienv
  cd cmake_targets
- ./build_oai  --build-telnetsrv
+ ./build_oai  --build-lib telnetsrv
 ```
 
 This will create the `libtelnetsrv.so` file in the `targets/bin` and `cmake_targets/lte_build_oai/build` sub directories of the oai repository.
@@ -23,6 +23,7 @@ Below are  examples of telnet sessions:
 *  [using the loop command](telnetloop.md)
 *  [loader command](telnetloader.md)
 *  [log command](telnetlog.md)
+*  [measur command](telnetmeasur.md)
 
 # telnet server parameters
 The telnet server is using the [oai configuration module](Config/Rtusage). Telnet parameters must be specified in the `telnetsrv` section. Some parameters can be modified via the telnet telnet server command, as specified in the last column of the following table.

doc/BUILD.md

@@ -70,13 +70,13 @@ After completing the build, the binaries are available in the `cmake_targets/lte
 
 ## Telnet Server
 
-The telnet server can be built  with the --build-telnet option, after building the softmodem or while building it.
+The telnet server can be built  with the `--build-lib telnetsrv` option, after building the softmodem or while building it.
 
-`./build_oai -I -w USRP --eNB --UE --build-telnetsrv`
+`./build_oai -I -w USRP --eNB --UE --build-lib telnetsrv`
 
 or
 
-`./build_oai  --build-telnetsrv`
+`./build_oai  --build-lib telnetsrv`
 
 ## USRP record player
 
@@ -94,7 +94,6 @@ The USRP record player today needs a specific build. Work to make it available a
 | --clean-kernel                                              | unknown                                     | no code in the script corresponding to this option           |
 | --install-system-files                                      | maintained                                  | install oai built binaries in linux system files repositories |
 | -w                                                          | maintained and tested in CI for USRP device | build corresponding oai device and create the soft link to enforce this device usage at run-time |
-| -t                                                          | maintained                                  | build the specified transport library, which is used in some simulators and in non monolithic eNodeB deployments. Now of little interest as transport library build is enforced when building the eNodeB. |
 | --phy_simulators                                            | maintained, tested in CI                    | build all PHY simulators, a set of executables allowing unitary tests of LTE channel implementation within oai. |
 | --core_simulators                                           |                                             |                                                              |
 | -s                                                          |                                             |                                                              |
@@ -106,24 +105,17 @@ The USRP record player today needs a specific build. Work to make it available a
 | --eNB                                                       | maintained and tested in CI                 | build `lte-softmodem` the LTE eNodeB                         |
 | --UE                                                        | maintained and tested in CI                 | build `lte-uesoftmodem` the LTE UE                           |
 | --usrp-recplay                                              | maintained                                  | build with support for the record player. Implementation will be soon reviewed to switch to a run-time option. |
-| --build-telnet                                              | maintained                                  | build the telnet server shared library, which can then be loaded at run time via the --telnetsrv command line option. |
+| --build-lib                                                 | maintained                                  | build  optional shared library(ies), which can then be loaded at run time via command line option. Use the --help option to get the list of supported optional libraries. |
-| --build-msc                                                 | unknown                                     | build the msc shared library, which can then be loaded at run time via the --msc command line option. msc is a tracing utility which status is unknown. |
 | --UE-conf-nvram                                             |                                             |                                                              |
 | --UE-gen-nvram                                              |                                             |                                                              |
 | -r                                                          | unknown, to be removed                      | specifies which 3GPP release to build for. Only the default (today rel14) is tested in CI and it is likely that future oai release will remove this option |
 | -V                                                          | deprecated                                  | Used to build with support for synchronization diagram utility. This is now available via the T-Tracer and is included if T-Tracer is not disabled. |
-| -x                                                          | deprecated                                  | Used to build with support for embedded signal analyzer. This is now available via the T-Tracer and is included if T-Tracer is not disabled. |
-| --noS1                                                      | deprecated, to be removed                   | build noS1 version of oai softmodem binaries. noS1 allows running oai eNodeB and UE without an LTE core network (EPC). This functionality is now available via a run-time option. |
 | --build-doxygen                                             | unknown                                     | build doxygen documentation, many oai source files do not include doxygen comments |
 | --disable-deadline --enable-deadline --disable-cpu-affinity | deprecated                                  | These options were used to activate or de-activate specific code depending on the choice of a specific linux scheduling  mode. This has not been tested for a while and should be implemented as configuration options |
 | --disable-T-Tracer                                          | maintained, to be tested                    | Remove T_Tracer and console LOG messages except error messages. |
 | --disable-hardware-dependency                               |                                             |                                                              |
 | --ue-autotest-trace --ue-timing --ue-trace                  | deprecated                                  | Were used to enable conditional code implementing debugging messages or debugging statistics. These functionalities are now either available from run-time options or not maintained. |
-| --disable-log                                               | deprecated, to be removed                   | Was used to disable LOG messages, replaced by `--disable-T-Tracer` build option to remove tracing code from the build or `--T-stdout 0` run time option to redirect LOG messages to T-Tracer client interface. |
-| --ue-nas-use-tun                                            | deprecated to be removed                    | Usage of tun  in place of specific kernel modules is now a run time option. `--nokrnmod 0` option disable the default behavior which is to use tun to send or receive ip packets to/from the linux ip stack. |
 | --build-eclipse                                             | unknown                                     |                                                              |
-| --basic-simulator                                           | deprecated tested in CI                     | builds the basic simulator device. Now of little interest as this device build is enforced when building the eNodeB and it can be used at run time with the `--basicsim` option. More over the rf simulator is an enhanced basic simulator. |
-| --rfsimulator                                               | maintained                                  | builds the rf simulator device. Now of little interest as this device build is enforced when building the eNodeB and it can be used at run time with the `--rfsim` option. |
 |                                                             |                                             |                                                              |
 
 [oai wiki home](https://gitlab.eurecom.fr/oai/openairinterface5g/wikis/home)

openair1/PHY/INIT/lte_parms.c

@@ -22,33 +22,22 @@
 #include "phy_init.h"
 #include "common/utils/LOG/log.h"
 
-uint16_t dl_S_table_normal[10]={3,9,10,11,12,3,9,10,11,6};
+uint16_t dl_S_table_normal[10]= {3,9,10,11,12,3,9,10,11,6};
-uint16_t dl_S_table_extended[10]={3,8,9,10,3,8,9,5,0,0};
+uint16_t dl_S_table_extended[10]= {3,8,9,10,3,8,9,5,0,0};
 
 void set_S_config(LTE_DL_FRAME_PARMS *fp) {
-
   int X = fp->srsX;
-
   fp->ul_symbols_in_S_subframe=(1+X);
 
   if ((fp->Ncp==EXTENDED) && (fp->tdd_config_S>7))
     AssertFatal(1==0,"Illegal S subframe configuration for Extended Prefix mode\n");
 
   fp->dl_symbols_in_S_subframe = (fp->Ncp==NORMAL)?dl_S_table_normal[fp->tdd_config_S] : dl_S_table_extended[fp->tdd_config_S];
-
-  
 }
 
-int init_frame_parms(LTE_DL_FRAME_PARMS *frame_parms,uint8_t osf)
+int init_frame_parms(LTE_DL_FRAME_PARMS *frame_parms,uint8_t osf) {
-{
-
   uint8_t log2_osf;
-
-#if DISABLE_LOG_X
-  printf("Initializing frame parms for N_RB_DL %d, Ncp %d, osf %d\n",frame_parms->N_RB_DL,frame_parms->Ncp,osf);
-#else
   LOG_I(PHY,"Initializing frame parms for N_RB_DL %d, Ncp %d, osf %d\n",frame_parms->N_RB_DL,frame_parms->Ncp,osf);
-#endif
 
   if (frame_parms->Ncp==EXTENDED) {
     frame_parms->nb_prefix_samples0=512;
@@ -58,125 +47,109 @@ int init_frame_parms(LTE_DL_FRAME_PARMS *frame_parms,uint8_t osf)
     frame_parms->nb_prefix_samples0 = 160;
     frame_parms->nb_prefix_samples = 144;
     frame_parms->symbols_per_tti = 14;
-      
   }
 
-
   switch(osf) {
-  case 1:
+    case 1:
-    log2_osf = 0;
+      log2_osf = 0;
-    break;
+      break;
 
-  case 2:
+    case 2:
-    log2_osf = 1;
+      log2_osf = 1;
-    break;
+      break;
 
-  case 4:
+    case 4:
-    log2_osf = 2;
+      log2_osf = 2;
-    break;
+      break;
 
-  case 8:
+    case 8:
-    log2_osf = 3;
+      log2_osf = 3;
-    break;
+      break;
 
-  case 16:
+    case 16:
-    log2_osf = 4;
+      log2_osf = 4;
-    break;
+      break;
-
-  default:
-    AssertFatal(1==0,"Illegal oversampling %d\n",osf);
 
+    default:
+      AssertFatal(1==0,"Illegal oversampling %d\n",osf);
   }
 
   switch (frame_parms->N_RB_DL) {
+    case 100:
+      AssertFatal(osf==1,"Illegal oversampling %d for N_RB_DL %d\n",osf,frame_parms->N_RB_DL);
 
-  case 100:
+      if (frame_parms->threequarter_fs) {
-    AssertFatal(osf==1,"Illegal oversampling %d for N_RB_DL %d\n",osf,frame_parms->N_RB_DL);
+        frame_parms->ofdm_symbol_size = 1536;
+        frame_parms->samples_per_tti = 23040;
+        frame_parms->first_carrier_offset = 1536-600;
+        frame_parms->nb_prefix_samples=(frame_parms->nb_prefix_samples*3)>>2;
+        frame_parms->nb_prefix_samples0=(frame_parms->nb_prefix_samples0*3)>>2;
+      } else {
+        frame_parms->ofdm_symbol_size = 2048;
+        frame_parms->samples_per_tti = 30720;
+        frame_parms->first_carrier_offset = 2048-600;
+      }
 
+      frame_parms->N_RBGS = 4;
+      frame_parms->N_RBG = 25;
+      break;
 
-    if (frame_parms->threequarter_fs) {
+    case 75:
+      AssertFatal(osf==1,"Illegal oversampling %d for N_RB_DL %d\n",osf,frame_parms->N_RB_DL);
       frame_parms->ofdm_symbol_size = 1536;
       frame_parms->samples_per_tti = 23040;
-      frame_parms->first_carrier_offset = 1536-600;
+      frame_parms->first_carrier_offset = 1536-450;
       frame_parms->nb_prefix_samples=(frame_parms->nb_prefix_samples*3)>>2;
       frame_parms->nb_prefix_samples0=(frame_parms->nb_prefix_samples0*3)>>2;
+      frame_parms->N_RBGS = 4;
+      frame_parms->N_RBG = 25;
+      break;
 
-    }
+    case 50:
-    else {
+      AssertFatal(osf==1,"Illegal oversampling %d for N_RB_DL %d\n",osf,frame_parms->N_RB_DL);
-      frame_parms->ofdm_symbol_size = 2048;
+      frame_parms->ofdm_symbol_size = 1024*osf;
-      frame_parms->samples_per_tti = 30720;
+      frame_parms->samples_per_tti = 15360*osf;
-      frame_parms->first_carrier_offset = 2048-600;
+      frame_parms->first_carrier_offset = frame_parms->ofdm_symbol_size - 300;
-    }
+      frame_parms->nb_prefix_samples>>=(1-log2_osf);
-    frame_parms->N_RBGS = 4;
+      frame_parms->nb_prefix_samples0>>=(1-log2_osf);
-    frame_parms->N_RBG = 25;
+      frame_parms->N_RBGS = 3;
-    break;
+      frame_parms->N_RBG = 17;
+      break;
 
-  case 75:
+    case 25:
-    AssertFatal(osf==1,"Illegal oversampling %d for N_RB_DL %d\n",osf,frame_parms->N_RB_DL);
+      AssertFatal(osf<=2,"Illegal oversampling %d for N_RB_DL %d\n",osf,frame_parms->N_RB_DL);
+      frame_parms->ofdm_symbol_size = 512*osf;
+      frame_parms->samples_per_tti = 7680*osf;
+      frame_parms->first_carrier_offset = frame_parms->ofdm_symbol_size - 150;
+      frame_parms->nb_prefix_samples>>=(2-log2_osf);
+      frame_parms->nb_prefix_samples0>>=(2-log2_osf);
+      frame_parms->N_RBGS = 2;
+      frame_parms->N_RBG = 13;
+      break;
 
-    frame_parms->ofdm_symbol_size = 1536;
+    case 15:
-    frame_parms->samples_per_tti = 23040;
+      frame_parms->ofdm_symbol_size = 256*osf;
-    frame_parms->first_carrier_offset = 1536-450;
+      frame_parms->samples_per_tti = 3840*osf;
-    frame_parms->nb_prefix_samples=(frame_parms->nb_prefix_samples*3)>>2;
+      frame_parms->first_carrier_offset = frame_parms->ofdm_symbol_size - 90;
-    frame_parms->nb_prefix_samples0=(frame_parms->nb_prefix_samples0*3)>>2;
+      frame_parms->nb_prefix_samples>>=(3-log2_osf);
-    frame_parms->N_RBGS = 4;
+      frame_parms->nb_prefix_samples0>>=(3-log2_osf);
-    frame_parms->N_RBG = 25;
+      frame_parms->N_RBGS = 2;
-    break;
+      frame_parms->N_RBG = 8;
+      break;
 
-  case 50:
+    case 6:
-    AssertFatal(osf==1,"Illegal oversampling %d for N_RB_DL %d\n",osf,frame_parms->N_RB_DL);
+      frame_parms->ofdm_symbol_size = 128*osf;
+      frame_parms->samples_per_tti = 1920*osf;
+      frame_parms->first_carrier_offset = frame_parms->ofdm_symbol_size - 36;
+      frame_parms->nb_prefix_samples>>=(4-log2_osf);
+      frame_parms->nb_prefix_samples0>>=(4-log2_osf);
+      frame_parms->N_RBGS = 1;
+      frame_parms->N_RBG = 6;
+      break;
 
-    frame_parms->ofdm_symbol_size = 1024*osf;
+    default:
-    frame_parms->samples_per_tti = 15360*osf;
+      AssertFatal(1==0,"Number of resource blocks (N_RB_DL %d) undefined, frame_parms = %p \n",frame_parms->N_RB_DL, frame_parms);
-    frame_parms->first_carrier_offset = frame_parms->ofdm_symbol_size - 300;
+      break;
-    frame_parms->nb_prefix_samples>>=(1-log2_osf);
-    frame_parms->nb_prefix_samples0>>=(1-log2_osf);
-    frame_parms->N_RBGS = 3;
-    frame_parms->N_RBG = 17;
-    break;
-
-  case 25:
-    AssertFatal(osf<=2,"Illegal oversampling %d for N_RB_DL %d\n",osf,frame_parms->N_RB_DL);
-    
-
-    frame_parms->ofdm_symbol_size = 512*osf;
-
-
-    frame_parms->samples_per_tti = 7680*osf;
-    frame_parms->first_carrier_offset = frame_parms->ofdm_symbol_size - 150;
-    frame_parms->nb_prefix_samples>>=(2-log2_osf);
-    frame_parms->nb_prefix_samples0>>=(2-log2_osf);
-    frame_parms->N_RBGS = 2;
-    frame_parms->N_RBG = 13;
-
-    break;
-
-  case 15:
-    frame_parms->ofdm_symbol_size = 256*osf;
-    frame_parms->samples_per_tti = 3840*osf;
-    frame_parms->first_carrier_offset = frame_parms->ofdm_symbol_size - 90;
-    frame_parms->nb_prefix_samples>>=(3-log2_osf);
-    frame_parms->nb_prefix_samples0>>=(3-log2_osf);
-    frame_parms->N_RBGS = 2;
-    frame_parms->N_RBG = 8;
-
-    break;
-
-  case 6:
-    frame_parms->ofdm_symbol_size = 128*osf;
-    frame_parms->samples_per_tti = 1920*osf;
-    frame_parms->first_carrier_offset = frame_parms->ofdm_symbol_size - 36;
-    frame_parms->nb_prefix_samples>>=(4-log2_osf);
-    frame_parms->nb_prefix_samples0>>=(4-log2_osf);
-    frame_parms->N_RBGS = 1;
-    frame_parms->N_RBG = 6;
-
-    break;
-
-  default:
-    AssertFatal(1==0,"Number of resource blocks (N_RB_DL %d) undefined, frame_parms = %p \n",frame_parms->N_RB_DL, frame_parms);
-
-    break;
   }
 
   LOG_I(PHY,"lte_parms.c: Setting N_RB_DL to %d, ofdm_symbol_size %d\n",frame_parms->N_RB_DL, frame_parms->ofdm_symbol_size);
@@ -188,8 +161,7 @@ int init_frame_parms(LTE_DL_FRAME_PARMS *frame_parms,uint8_t osf)
 }
 
 
-void dump_frame_parms(LTE_DL_FRAME_PARMS *frame_parms)
+void dump_frame_parms(LTE_DL_FRAME_PARMS *frame_parms) {
-{
   LOG_I(PHY,"frame_parms->N_RB_DL=%d\n",frame_parms->N_RB_DL);
   LOG_I(PHY,"frame_parms->N_RB_UL=%d\n",frame_parms->N_RB_UL);
   LOG_I(PHY,"frame_parms->Nid_cell=%d\n",frame_parms->Nid_cell);

openair1/PHY/LTE_UE_TRANSPORT/dlsch_demodulation.c

@@ -62,14 +62,6 @@
 int16_t dlsch_demod_shift = 0;
 int16_t interf_unaw_shift = 13;
 
-//#define DEBUG_HARQ
-
-//#define DEBUG_PHY 1
-//#define DEBUG_DLSCH_DEMOD 1
-
-//#define DISABLE_LOG_X
-
-// [MCS][i_mod (0,1,2) = (2,4,6)]
 unsigned char offset_mumimo_llr_drange_fix=0;
 //inferference-free case
 unsigned char interf_unaw_shift_tm4_mcs[29]= {5, 3, 4, 3, 3, 2, 1, 1, 2, 0, 1, 1, 1, 1, 0, 0,
@@ -379,14 +371,9 @@ int rx_pdsch(PHY_VARS_UE *ue,
 
 #if UE_TIMING_TRACE
   stop_meas(&ue->generic_stat_bis[ue->current_thread_id[subframe]][slot]);
-#if DISABLE_LOG_X
-  printf("[AbsSFN %d.%d] Slot%d Symbol %d Flag %d type %d: Pilot/Data extraction %5.2f \n",frame,subframe,slot,
-         symbol,ue->high_speed_flag,type,ue->generic_stat_bis[ue->current_thread_id[subframe]][slot].p_time/(cpuf*1000.0));
-#else
   LOG_I(PHY, "[AbsSFN %d.%d] Slot%d Symbol %d Flag %d type %d: Pilot/Data extraction  %5.2f \n",frame,subframe,slot,symbol,
         ue->high_speed_flag,type,ue->generic_stat_bis[ue->current_thread_id[subframe]][slot].p_time/(cpuf*1000.0));
 #endif
-#endif
 #if UE_TIMING_TRACE
   start_meas(&ue->generic_stat_bis[ue->current_thread_id[subframe]][slot]);
 #endif
@@ -412,13 +399,7 @@ int rx_pdsch(PHY_VARS_UE *ue,
 
 #if UE_TIMING_TRACE
   stop_meas(&ue->generic_stat_bis[ue->current_thread_id[subframe]][slot]);
-#if DISABLE_LOG_X
-  printf("[AbsSFN %d.%d] Slot%d Symbol %d: Channel Scale %5.2f \n",frame,subframe,slot,symbol,ue->generic_stat_bis[ue->current_thread_id[subframe]][slot].p_time/(cpuf*1000.0));
-#else
   LOG_I(PHY, "[AbsSFN %d.%d] Slot%d Symbol %d: Channel Scale  %5.2f \n",frame,subframe,slot,symbol,ue->generic_stat_bis[ue->current_thread_id[subframe]][slot].p_time/(cpuf*1000.0));
-#endif
-#endif
-#if UE_TIMING_TRACE
   start_meas(&ue->generic_stat_bis[ue->current_thread_id[subframe]][slot]);
 #endif
 
@@ -527,15 +508,8 @@ int rx_pdsch(PHY_VARS_UE *ue,
 #endif
 #if UE_TIMING_TRACE
   stop_meas(&ue->generic_stat_bis[ue->current_thread_id[subframe]][slot]);
-#if DISABLE_LOG_X
-  printf("[AbsSFN %d.%d] Slot%d Symbol %d first_symbol_flag %d: Channel Level %5.2f \n",frame,subframe,slot,symbol,first_symbol_flag,
-         ue->generic_stat_bis[ue->current_thread_id[subframe]][slot].p_time/(cpuf*1000.0));
-#else
   LOG_I(PHY, "[AbsSFN %d.%d] Slot%d Symbol %d first_symbol_flag %d: Channel Level  %5.2f \n",frame,subframe,slot,symbol,first_symbol_flag,
         ue->generic_stat_bis[ue->current_thread_id[subframe]][slot].p_time/(cpuf*1000.0));
-#endif
-#endif
-#if UE_TIMING_TRACE
   start_meas(&ue->generic_stat_bis[ue->current_thread_id[subframe]][slot]);
 #endif
 
@@ -758,16 +732,8 @@ int rx_pdsch(PHY_VARS_UE *ue,
 
 #if UE_TIMING_TRACE
   stop_meas(&ue->generic_stat_bis[ue->current_thread_id[subframe]][slot]);
-#if DISABLE_LOG_X
-  printf("[AbsSFN %d.%d] Slot%d Symbol %d log2_maxh %d channel_level %d: Channel Comp %5.2f \n",frame,subframe,slot,symbol,pdsch_vars[eNB_id]->log2_maxh,proc->channel_level,
-         ue->generic_stat_bis[ue->current_thread_id[subframe]][slot].p_time/(cpuf*1000.0));
-#else
   LOG_I(PHY, "[AbsSFN %d.%d] Slot%d Symbol %d log2_maxh %d Channel Comp  %5.2f \n",frame,subframe,slot,symbol,pdsch_vars[eNB_id]->log2_maxh,
         ue->generic_stat_bis[ue->current_thread_id[subframe]][slot].p_time/(cpuf*1000.0));
-#endif
-#endif
-  // MRC
-#if UE_TIMING_TRACE
   start_meas(&ue->generic_stat_bis[ue->current_thread_id[subframe]][slot]);
 #endif
 
@@ -840,13 +806,7 @@ int rx_pdsch(PHY_VARS_UE *ue,
 
 #if UE_TIMING_TRACE
   stop_meas(&ue->generic_stat_bis[ue->current_thread_id[subframe]][slot]);
-#if DISABLE_LOG_X
-  printf("[AbsSFN %d.%d] Slot%d Symbol %d: Channel Combine %5.2f \n",frame,subframe,slot,symbol,ue->generic_stat_bis[ue->current_thread_id[subframe]][slot].p_time/(cpuf*1000.0));
-#else
   LOG_I(PHY, "[AbsSFN %d.%d] Slot%d Symbol %d: Channel Combine  %5.2f \n",frame,subframe,slot,symbol,ue->generic_stat_bis[ue->current_thread_id[subframe]][slot].p_time/(cpuf*1000.0));
-#endif
-#endif
-#if UE_TIMING_TRACE
   start_meas(&ue->generic_stat_bis[ue->current_thread_id[subframe]][slot]);
 #endif
   //printf("LLR dlsch0_harq->Qm %d rx_type %d cw0 %d cw1 %d symbol %d \n",dlsch0_harq->Qm,rx_type,codeword_TB0,codeword_TB1,symbol);
@@ -1210,11 +1170,7 @@ int rx_pdsch(PHY_VARS_UE *ue,
 
 #if UE_TIMING_TRACE
   stop_meas(&ue->generic_stat_bis[ue->current_thread_id[subframe]][slot]);
-#if DISABLE_LOG_X
-  printf("[AbsSFN %d.%d] Slot%d Symbol %d: LLR Computation %5.2f \n",frame,subframe,slot,symbol,ue->generic_stat_bis[ue->current_thread_id[subframe]][slot].p_time/(cpuf*1000.0));
-#else
   LOG_D(PHY, "[AbsSFN %d.%d] Slot%d Symbol %d: LLR Computation  %5.2f \n",frame,subframe,slot,symbol,ue->generic_stat_bis[ue->current_thread_id[subframe]][slot].p_time/(cpuf*1000.0));
-#endif
 #endif
   // Please keep it: useful for debugging
 #if 0
@@ -1224,7 +1180,7 @@ int rx_pdsch(PHY_VARS_UE *ue,
 
     if(1) {
 #if 1
-      LOG_M("rxdataF0.m"    , "rxdataF0",             &common_vars->common_vars_rx_data_per_thread[ue->current_thread_id[subframe]].rxdataF[0][0],14*frame_parms->ofdm_symbol_size,1,1);
+      LOG_M("rxdataF0.m", "rxdataF0",             &common_vars->common_vars_rx_data_per_thread[ue->current_thread_id[subframe]].rxdataF[0][0],14*frame_parms->ofdm_symbol_size,1,1);
       //LOG_M("rxdataF1.m"    , "rxdataF1",             &common_vars->common_vars_rx_data_per_thread[ue->current_thread_id[subframe]].rxdataF[0][0],14*frame_parms->ofdm_symbol_size,1,1);
       LOG_M("dl_ch_estimates00.m", "dl_ch_estimates00",   &common_vars->common_vars_rx_data_per_thread[ue->current_thread_id[subframe]].dl_ch_estimates[eNB_id][0][0],14*frame_parms->ofdm_symbol_size,1,1);
       //LOG_M("dl_ch_estimates01.m", "dl_ch_estimates01",   &common_vars->common_vars_rx_data_per_thread[ue->current_thread_id[subframe]].dl_ch_estimates[eNB_id][1][0],14*frame_parms->ofdm_symbol_size,1,1);
@@ -4767,8 +4723,7 @@ unsigned short dlsch_extract_rbs_single(int **rxdataF,
 
         dl_ch0+=12;
         rxF+=12;
-      }
+      } else { // Odd number of RBs
-    else {  // Odd number of RBs
       for (rb=0; rb<frame_parms->N_RB_DL>>1; rb++) {
 #ifdef DEBUG_DLSCH_DEMOD
         printf("dlch_ext %u\n",dl_ch0_ext-&dl_ch_estimates_ext[aarx][0]);
@@ -5811,8 +5766,7 @@ unsigned short dlsch_extract_rbs_TM7(int **rxdataF,
 
         dl_ch0+=12;
         rxF+=12;
-      }
+      } else { // Odd number of RBs
-    else {  // Odd number of RBs
       for (rb=0; rb<frame_parms->N_RB_DL>>1; rb++) {
         skip_half=0;
 

openair1/PHY/LTE_UE_TRANSPORT/initial_sync.c

@@ -31,6 +31,7 @@
 */
 #include "PHY/types.h"
 #include "PHY/defs_UE.h"
+#include "targets/RT/USER/lte-softmodem.h"
 #include "PHY/phy_extern_ue.h"
 #include "SCHED_UE/sched_UE.h"
 #include "transport_proto_ue.h"
@@ -45,63 +46,57 @@ extern openair0_config_t openair0_cfg[];
 
 //#define DEBUG_INITIAL_SYNCH
 
-int pbch_detection(PHY_VARS_UE *ue, runmode_t mode)
+int pbch_detection(PHY_VARS_UE *ue, runmode_t mode) {
-{
-
   uint8_t l,pbch_decoded,frame_mod4,pbch_tx_ant,dummy;
   LTE_DL_FRAME_PARMS *frame_parms=&ue->frame_parms;
   char phich_resource[6];
 
-#ifdef DEBUG_INITIAL_SYNCH
+  LOG_D(PHY,"[UE%d] Initial sync: starting PBCH detection (rx_offset %d)\n",ue->Mod_id,
-  LOG_I(PHY,"[UE%d] Initial sync: starting PBCH detection (rx_offset %d)\n",ue->Mod_id,
         ue->rx_offset);
-#endif
 
   for (l=0; l<frame_parms->symbols_per_tti/2; l++) {
-
     slot_fep(ue,
-	     l,
+             l,
-	     0,
+             0,
-	     ue->rx_offset,
+             ue->rx_offset,
-	     0,
+             0,
-	     1);
+             1);
   }
+
   for (l=0; l<frame_parms->symbols_per_tti/2; l++) {
-
     slot_fep(ue,
-	     l,
+             l,
-	     1,
+             1,
-	     ue->rx_offset,
+             ue->rx_offset,
-	     0,
+             0,
-	     1);
+             1);
   }
+
   slot_fep(ue,
-	   0,
+           0,
-	   2,
+           2,
-	   ue->rx_offset,
+           ue->rx_offset,
-	   0,
+           0,
-	   1);
+           1);
-
   lte_ue_measurements(ue,
-		      ue->rx_offset,
+                      ue->rx_offset,
-		      0,
+                      0,
+                      0,
                       0,
-		      0,
                       0);
 
-
   if (ue->frame_parms.frame_type == TDD) {
     ue_rrc_measurements(ue,
-			2,
+                        2,
-			0);
+                        0);
-  }
+  } else {
-  else {
     ue_rrc_measurements(ue,
-			0,
+                        0,
-			0);
+                        0);
   }
-#ifdef DEBUG_INITIAL_SYNCH
+
-  LOG_I(PHY,"[UE %d] RX RSSI %d dBm, digital (%d, %d) dB, linear (%d, %d), avg rx power %d dB (%d lin), RX gain %d dB\n",
+
+  LOG_D(PHY,"[UE %d] RX RSSI %d dBm, digital (%d, %d) dB, linear (%d, %d), avg rx power %d dB (%d lin), RX gain %d dB\n",
         ue->Mod_id,
         ue->measurements.rx_rssi_dBm[0] - ((ue->frame_parms.nb_antennas_rx==2) ? 3 : 0),
         ue->measurements.rx_power_dB[0][0],
@@ -112,7 +107,7 @@ int pbch_detection(PHY_VARS_UE *ue, runmode_t mode)
         ue->measurements.rx_power_avg[0],
         ue->rx_total_gain_dB);
 
-  LOG_I(PHY,"[UE %d] N0 %d dBm digital (%d, %d) dB, linear (%d, %d), avg noise power %d dB (%d lin)\n",
+  LOG_D(PHY,"[UE %d] N0 %d dBm digital (%d, %d) dB, linear (%d, %d), avg noise power %d dB (%d lin)\n",
         ue->Mod_id,
         ue->measurements.n0_power_tot_dBm,
         ue->measurements.n0_power_dB[0],
@@ -121,7 +116,6 @@ int pbch_detection(PHY_VARS_UE *ue, runmode_t mode)
         ue->measurements.n0_power[1],
         ue->measurements.n0_power_avg_dB,
         ue->measurements.n0_power_avg);
-#endif
 
   pbch_decoded = 0;
 
@@ -153,96 +147,87 @@ int pbch_detection(PHY_VARS_UE *ue, runmode_t mode)
     }
   }
 
-
   if (pbch_decoded) {
-
     frame_parms->nb_antenna_ports_eNB = pbch_tx_ant;
-
     // set initial transmission mode to 1 or 2 depending on number of detected TX antennas
     // openair_daq_vars.dlsch_transmission_mode = (pbch_tx_ant>1) ? 2 : 1;
-
-
     // flip byte endian on 24-bits for MIB
     //    dummy = ue->pbch_vars[0]->decoded_output[0];
     //    ue->pbch_vars[0]->decoded_output[0] = ue->pbch_vars[0]->decoded_output[2];
     //    ue->pbch_vars[0]->decoded_output[2] = dummy;
-
     // now check for Bandwidth of Cell
     dummy = (ue->pbch_vars[0]->decoded_output[2]>>5)&7;
 
     switch (dummy) {
+      case 0 :
+        frame_parms->N_RB_DL = 6;
+        break;
 
-    case 0 :
+      case 1 :
-      frame_parms->N_RB_DL = 6;
+        frame_parms->N_RB_DL = 15;
-      break;
+        break;
 
-    case 1 :
+      case 2 :
-      frame_parms->N_RB_DL = 15;
+        frame_parms->N_RB_DL = 25;
-      break;
+        break;
 
-    case 2 :
+      case 3 :
-      frame_parms->N_RB_DL = 25;
+        frame_parms->N_RB_DL = 50;
-      break;
+        break;
 
-    case 3 :
+      case 4 :
-      frame_parms->N_RB_DL = 50;
+        frame_parms->N_RB_DL = 75;
-      break;
+        break;
 
-    case 4 :
+      case 5:
-      frame_parms->N_RB_DL = 75;
+        frame_parms->N_RB_DL = 100;
-      break;
+        break;
 
-    case 5:
+      default:
-      frame_parms->N_RB_DL = 100;
+        LOG_E(PHY,"[UE%d] Initial sync: PBCH decoding: Unknown N_RB_DL\n",ue->Mod_id);
-      break;
+        return -1;
-
+        break;
-    default:
-      LOG_E(PHY,"[UE%d] Initial sync: PBCH decoding: Unknown N_RB_DL\n",ue->Mod_id);
-      return -1;
-      break;
     }
 
-
     // now check for PHICH parameters
     frame_parms->phich_config_common.phich_duration = (PHICH_DURATION_t)((ue->pbch_vars[0]->decoded_output[2]>>4)&1);
     dummy = (ue->pbch_vars[0]->decoded_output[2]>>2)&3;
 
     switch (dummy) {
-    case 0:
+      case 0:
-      frame_parms->phich_config_common.phich_resource = oneSixth;
+        frame_parms->phich_config_common.phich_resource = oneSixth;
-      sprintf(phich_resource,"1/6");
+        sprintf(phich_resource,"1/6");
-      break;
+        break;
 
-    case 1:
+      case 1:
-      frame_parms->phich_config_common.phich_resource = half;
+        frame_parms->phich_config_common.phich_resource = half;
-      sprintf(phich_resource,"1/2");
+        sprintf(phich_resource,"1/2");
-      break;
+        break;
 
-    case 2:
+      case 2:
-      frame_parms->phich_config_common.phich_resource = one;
+        frame_parms->phich_config_common.phich_resource = one;
-      sprintf(phich_resource,"1");
+        sprintf(phich_resource,"1");
-      break;
+        break;
 
-    case 3:
+      case 3:
-      frame_parms->phich_config_common.phich_resource = two;
+        frame_parms->phich_config_common.phich_resource = two;
-      sprintf(phich_resource,"2");
+        sprintf(phich_resource,"2");
-      break;
+        break;
 
-    default:
+      default:
-      LOG_E(PHY,"[UE%d] Initial sync: Unknown PHICH_DURATION\n",ue->Mod_id);
+        LOG_E(PHY,"[UE%d] Initial sync: Unknown PHICH_DURATION\n",ue->Mod_id);
-      return -1;
+        return -1;
-      break;
+        break;
     }
 
-    for(int i=0; i<RX_NB_TH;i++)
+    for(int i=0; i<RX_NB_TH; i++) {
-    {
+      ue->proc.proc_rxtx[i].frame_rx =   (((ue->pbch_vars[0]->decoded_output[2]&3)<<6) + (ue->pbch_vars[0]->decoded_output[1]>>2))<<2;
-        ue->proc.proc_rxtx[i].frame_rx =   (((ue->pbch_vars[0]->decoded_output[2]&3)<<6) + (ue->pbch_vars[0]->decoded_output[1]>>2))<<2;
+      ue->proc.proc_rxtx[i].frame_rx =   (((ue->pbch_vars[0]->decoded_output[2]&3)<<6) + (ue->pbch_vars[0]->decoded_output[1]>>2))<<2;
-        ue->proc.proc_rxtx[i].frame_rx =   (((ue->pbch_vars[0]->decoded_output[2]&3)<<6) + (ue->pbch_vars[0]->decoded_output[1]>>2))<<2;
+      ue->proc.proc_rxtx[i].frame_tx = ue->proc.proc_rxtx[0].frame_rx;
-
-        ue->proc.proc_rxtx[i].frame_tx = ue->proc.proc_rxtx[0].frame_rx;
     }
-#ifdef DEBUG_INITIAL_SYNCH
+
-    LOG_I(PHY,"[UE%d] Initial sync: pbch decoded sucessfully p %d, tx_ant %d, frame %d, N_RB_DL %d, phich_duration %d, phich_resource %s!\n",
+
+    LOG_D(PHY,"[UE%d] Initial sync: pbch decoded sucessfully p %d, tx_ant %d, frame %d, N_RB_DL %d, phich_duration %d, phich_resource %s!\n",
           ue->Mod_id,
           frame_parms->nb_antenna_ports_eNB,
           pbch_tx_ant,
@@ -250,21 +235,17 @@ int pbch_detection(PHY_VARS_UE *ue, runmode_t mode)
           frame_parms->N_RB_DL,
           frame_parms->phich_config_common.phich_duration,
           phich_resource);  //frame_parms->phich_config_common.phich_resource);
-#endif
     return(0);
   } else {
     return(-1);
   }
-
 }
 
 char phich_string[13][4] = {"","1/6","","1/2","","","one","","","","","","two"};
 char duplex_string[2][4] = {"FDD","TDD"};
 char prefix_string[2][9] = {"NORMAL","EXTENDED"};
 
-int initial_sync(PHY_VARS_UE *ue, runmode_t mode)
+int initial_sync(PHY_VARS_UE *ue, runmode_t mode) {
-{
-
   int32_t sync_pos,sync_pos2,sync_pos_slot;
   int32_t metric_fdd_ncp=0,metric_fdd_ecp=0,metric_tdd_ncp=0,metric_tdd_ecp=0;
   uint8_t phase_fdd_ncp,phase_fdd_ecp,phase_tdd_ncp,phase_tdd_ecp;
@@ -273,15 +254,10 @@ int initial_sync(PHY_VARS_UE *ue, runmode_t mode)
   LTE_DL_FRAME_PARMS *frame_parms = &ue->frame_parms;
   int ret=-1;
   int aarx,rx_power=0;
-  /*#ifdef OAI_USRP
-  __m128i *rxdata128;
-  #endif*/
-  //  LOG_I(PHY,"**************************************************************\n");
   // First try FDD normal prefix
   frame_parms->Ncp=NORMAL;
   frame_parms->frame_type=FDD;
   frame_parms->nb_antenna_ports_eNB = 2;
-
   init_frame_parms(frame_parms,1);
   /*
   LOG_M("rxdata0.m","rxd0",ue->common_vars.rxdata[0],10*frame_parms->samples_per_tti,1,1);
@@ -297,12 +273,10 @@ int initial_sync(PHY_VARS_UE *ue, runmode_t mode)
   else
     sync_pos2 = sync_pos + FRAME_LENGTH_COMPLEX_SAMPLES - frame_parms->nb_prefix_samples;
 
-#ifdef DEBUG_INITIAL_SYNCH
+
-  LOG_I(PHY,"[UE%d] Initial sync : Estimated PSS position %d, Nid2 %d\n",ue->Mod_id,sync_pos,ue->common_vars.eNb_id);
+  LOG_D(PHY,"[UE%d] Initial sync : Estimated PSS position %d, Nid2 %d\n",ue->Mod_id,sync_pos,ue->common_vars.eNb_id);
-#endif
 
   // SSS detection
-
   // PSS is hypothesized in last symbol of first slot in Frame
   sync_pos_slot = (frame_parms->samples_per_tti>>1) - frame_parms->ofdm_symbol_size - frame_parms->nb_prefix_samples;
 
@@ -313,9 +287,7 @@ int initial_sync(PHY_VARS_UE *ue, runmode_t mode)
 
   if (((sync_pos2 - sync_pos_slot) >=0 ) &&
       ((sync_pos2 - sync_pos_slot) < ((FRAME_LENGTH_COMPLEX_SAMPLES-frame_parms->samples_per_tti/2)))) {
-#ifdef DEBUG_INITIAL_SYNCH
+    LOG_D(PHY,"Calling sss detection (FDD normal CP)\n");
-    LOG_I(PHY,"Calling sss detection (FDD normal CP)\n");
-#endif
     rx_sss(ue,&metric_fdd_ncp,&flip_fdd_ncp,&phase_fdd_ncp);
     frame_parms->nushift  = frame_parms->Nid_cell%6;
 
@@ -327,19 +299,14 @@ int initial_sync(PHY_VARS_UE *ue, runmode_t mode)
     ret = pbch_detection(ue,mode);
     //   LOG_M("rxdata2.m","rxd2",ue->common_vars.rxdata[0],10*frame_parms->samples_per_tti,1,1);
 
-#ifdef DEBUG_INITIAL_SYNCH
+    LOG_D(PHY,"FDD Normal prefix: CellId %d metric %d, phase %d, flip %d, pbch %d\n",
-    LOG_I(PHY,"FDD Normal prefix: CellId %d metric %d, phase %d, flip %d, pbch %d\n",
+
           frame_parms->Nid_cell,metric_fdd_ncp,phase_fdd_ncp,flip_fdd_ncp,ret);
-#endif
   } else {
-#ifdef DEBUG_INITIAL_SYNCH
+    LOG_D(PHY,"FDD Normal prefix: SSS error condition: sync_pos %d, sync_pos_slot %d\n", sync_pos, sync_pos_slot);
-    LOG_I(PHY,"FDD Normal prefix: SSS error condition: sync_pos %d, sync_pos_slot %d\n", sync_pos, sync_pos_slot);
-#endif
   }
 
-
   if (ret==-1) {
-
     // Now FDD extended prefix
     frame_parms->Ncp=EXTENDED;
     frame_parms->frame_type=FDD;
@@ -362,7 +329,6 @@ int initial_sync(PHY_VARS_UE *ue, runmode_t mode)
 
     if (((sync_pos2 - sync_pos_slot) >=0 ) &&
         ((sync_pos2 - sync_pos_slot) < ((FRAME_LENGTH_COMPLEX_SAMPLES-frame_parms->samples_per_tti/2)))) {
-
       rx_sss(ue,&metric_fdd_ecp,&flip_fdd_ecp,&phase_fdd_ecp);
       frame_parms->nushift  = frame_parms->Nid_cell%6;
 
@@ -373,14 +339,10 @@ int initial_sync(PHY_VARS_UE *ue, runmode_t mode)
       lte_gold(frame_parms,ue->lte_gold_table[0],frame_parms->Nid_cell);
       ret = pbch_detection(ue,mode);
       //     LOG_M("rxdata3.m","rxd3",ue->common_vars.rxdata[0],10*frame_parms->samples_per_tti,1,1);
-#ifdef DEBUG_INITIAL_SYNCH
+      LOG_D(PHY,"FDD Extended prefix: CellId %d metric %d, phase %d, flip %d, pbch %d\n",
-      LOG_I(PHY,"FDD Extended prefix: CellId %d metric %d, phase %d, flip %d, pbch %d\n",
             frame_parms->Nid_cell,metric_fdd_ecp,phase_fdd_ecp,flip_fdd_ecp,ret);
-#endif
     } else {
-#ifdef DEBUG_INITIAL_SYNCH
+      LOG_D(PHY,"FDD Extended prefix: SSS error condition: sync_pos %d, sync_pos_slot %d\n", sync_pos, sync_pos_slot);
-      LOG_I(PHY,"FDD Extended prefix: SSS error condition: sync_pos %d, sync_pos_slot %d\n", sync_pos, sync_pos_slot);
-#endif
     }
 
     if (ret==-1) {
@@ -413,21 +375,19 @@ int initial_sync(PHY_VARS_UE *ue, runmode_t mode)
 
       frame_parms->nushift  = frame_parms->Nid_cell%6;
       init_frame_parms(&ue->frame_parms,1);
-
       lte_gold(frame_parms,ue->lte_gold_table[0],frame_parms->Nid_cell);
       ret = pbch_detection(ue,mode);
       //      LOG_M("rxdata4.m","rxd4",ue->common_vars.rxdata[0],10*frame_parms->samples_per_tti,1,1);
 
-#ifdef DEBUG_INITIAL_SYNCH
+      LOG_D(PHY,"TDD Normal prefix: CellId %d metric %d, phase %d, flip %d, pbch %d\n",
-      LOG_I(PHY,"TDD Normal prefix: CellId %d metric %d, phase %d, flip %d, pbch %d\n",
+
             frame_parms->Nid_cell,metric_tdd_ncp,phase_tdd_ncp,flip_tdd_ncp,ret);
-#endif
 
       if (ret==-1) {
         // Now TDD extended prefix
         frame_parms->Ncp=EXTENDED;
         frame_parms->frame_type=TDD;
-	frame_parms->tdd_config=1;
+        frame_parms->tdd_config=1;
         init_frame_parms(frame_parms,1);
         sync_pos2 = sync_pos - frame_parms->nb_prefix_samples;
 
@@ -453,134 +413,77 @@ int initial_sync(PHY_VARS_UE *ue, runmode_t mode)
         init_frame_parms(&ue->frame_parms,1);
         lte_gold(frame_parms,ue->lte_gold_table[0],frame_parms->Nid_cell);
         ret = pbch_detection(ue,mode);
+        //  LOG_M("rxdata5.m","rxd5",ue->common_vars.rxdata[0],10*frame_parms->samples_per_tti,1,1);
+
+        LOG_D(PHY,"TDD Extended prefix: CellId %d metric %d, phase %d, flip %d, pbch %d\n",
 
-	//	LOG_M("rxdata5.m","rxd5",ue->common_vars.rxdata[0],10*frame_parms->samples_per_tti,1,1);
-#ifdef DEBUG_INITIAL_SYNCH
-        LOG_I(PHY,"TDD Extended prefix: CellId %d metric %d, phase %d, flip %d, pbch %d\n",
               frame_parms->Nid_cell,metric_tdd_ecp,phase_tdd_ecp,flip_tdd_ecp,ret);
-#endif
       }
     }
   }
 
   /* Consider this is a false detection if the offset is > 1000 Hz */
-  if( (abs(ue->common_vars.freq_offset) > 150) && (ret == 0) )
+  if( (abs(ue->common_vars.freq_offset) > 150) && (ret == 0) ) {
-  {
+    ret=-1;
-	  ret=-1;
+    LOG_E(HW, "Ignore MIB with high freq offset [%d Hz] estimation \n",ue->common_vars.freq_offset);
-#if DISABLE_LOG_X
-	  printf("Ignore MIB with high freq offset [%d Hz] estimation \n",ue->common_vars.freq_offset);
-#else
-	  LOG_E(HW, "Ignore MIB with high freq offset [%d Hz] estimation \n",ue->common_vars.freq_offset);
-#endif
   }
 
   if (ret==0) {  // PBCH found so indicate sync to higher layers and configure frame parameters
-
-    //#ifdef DEBUG_INITIAL_SYNCH
-#if DISABLE_LOG_X
-    printf("[UE%d] In synch, rx_offset %d samples\n",ue->Mod_id, ue->rx_offset);
-#else
     LOG_I(PHY, "[UE%d] In synch, rx_offset %d samples\n",ue->Mod_id, ue->rx_offset);
-#endif
-    //#endif
 
     if (ue->UE_scan_carrier == 0) {
-
+#if UE_AUTOTEST_TRACE
-    #if UE_AUTOTEST_TRACE
       LOG_I(PHY,"[UE  %d] AUTOTEST Cell Sync : frame = %d, rx_offset %d, freq_offset %d \n",
-              ue->Mod_id,
+            ue->Mod_id,
-              ue->proc.proc_rxtx[0].frame_rx,
+            ue->proc.proc_rxtx[0].frame_rx,
-              ue->rx_offset,
+            ue->rx_offset,
-              ue->common_vars.freq_offset );
+            ue->common_vars.freq_offset );
-    #endif
+#endif
-
+      // send sync status to higher layers later when timing offset converge to target timing
-// send sync status to higher layers later when timing offset converge to target timing
-
       generate_pcfich_reg_mapping(frame_parms);
       generate_phich_reg_mapping(frame_parms);
-
-
       ue->pbch_vars[0]->pdu_errors_conseq=0;
-
     }
 
-#if DISABLE_LOG_X
-    printf("[UE %d] Frame %d RRC Measurements => rssi %3.1f dBm (dig %3.1f dB, gain %d), N0 %d dBm,  rsrp %3.1f dBm/RE, rsrq %3.1f dB\n",ue->Mod_id,
-	  ue->proc.proc_rxtx[0].frame_rx,
-	  10*log10(ue->measurements.rssi)-ue->rx_total_gain_dB,
-	  10*log10(ue->measurements.rssi),
-	  ue->rx_total_gain_dB,
-	  ue->measurements.n0_power_tot_dBm,
-	  10*log10(ue->measurements.rsrp[0])-ue->rx_total_gain_dB,
-	  (10*log10(ue->measurements.rsrq[0])));
-
-
-    printf("[UE %d] Frame %d MIB Information => %s, %s, NidCell %d, N_RB_DL %d, PHICH DURATION %d, PHICH RESOURCE %s, TX_ANT %d\n",
-	  ue->Mod_id,
-	  ue->proc.proc_rxtx[0].frame_rx,
-	  duplex_string[ue->frame_parms.frame_type],
-	  prefix_string[ue->frame_parms.Ncp],
-	  ue->frame_parms.Nid_cell,
-	  ue->frame_parms.N_RB_DL,
-	  ue->frame_parms.phich_config_common.phich_duration,
-	  phich_string[ue->frame_parms.phich_config_common.phich_resource],
-	  ue->frame_parms.nb_antenna_ports_eNB);
-#else
     LOG_I(PHY, "[UE %d] Frame %d RRC Measurements => rssi %3.1f dBm (dig %3.1f dB, gain %d), N0 %d dBm,  rsrp %3.1f dBm/RE, rsrq %3.1f dB\n",ue->Mod_id,
-	  ue->proc.proc_rxtx[0].frame_rx,
+          ue->proc.proc_rxtx[0].frame_rx,
-	  10*log10(ue->measurements.rssi)-ue->rx_total_gain_dB,
+          10*log10(ue->measurements.rssi)-ue->rx_total_gain_dB,
-	  10*log10(ue->measurements.rssi),
+          10*log10(ue->measurements.rssi),
-	  ue->rx_total_gain_dB,
+          ue->rx_total_gain_dB,
-	  ue->measurements.n0_power_tot_dBm,
+          ue->measurements.n0_power_tot_dBm,
-	  10*log10(ue->measurements.rsrp[0])-ue->rx_total_gain_dB,
+          10*log10(ue->measurements.rsrp[0])-ue->rx_total_gain_dB,
-	  (10*log10(ue->measurements.rsrq[0])));
+          (10*log10(ue->measurements.rsrq[0])));
-
     LOG_I(PHY, "[UE %d] Frame %d MIB Information => %s, %s, NidCell %d, N_RB_DL %d, PHICH DURATION %d, PHICH RESOURCE %s, TX_ANT %d\n",
-	  ue->Mod_id,
+          ue->Mod_id,
-	  ue->proc.proc_rxtx[0].frame_rx,
+          ue->proc.proc_rxtx[0].frame_rx,
-	  duplex_string[ue->frame_parms.frame_type],
+          duplex_string[ue->frame_parms.frame_type],
-	  prefix_string[ue->frame_parms.Ncp],
+          prefix_string[ue->frame_parms.Ncp],
-	  ue->frame_parms.Nid_cell,
+          ue->frame_parms.Nid_cell,
-	  ue->frame_parms.N_RB_DL,
+          ue->frame_parms.N_RB_DL,
-	  ue->frame_parms.phich_config_common.phich_duration,
+          ue->frame_parms.phich_config_common.phich_duration,
-	  phich_string[ue->frame_parms.phich_config_common.phich_resource],
+          phich_string[ue->frame_parms.phich_config_common.phich_resource],
-	  ue->frame_parms.nb_antenna_ports_eNB);
+          ue->frame_parms.nb_antenna_ports_eNB);
-#endif
-
-#if defined(OAI_USRP) || defined(EXMIMO) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
-#  if DISABLE_LOG_X
-    printf("[UE %d] Frame %d Measured Carrier Frequency %.0f Hz (offset %d Hz)\n",
-	  ue->Mod_id,
-	  ue->proc.proc_rxtx[0].frame_rx,
-	  openair0_cfg[0].rx_freq[0]-ue->common_vars.freq_offset,
-	  ue->common_vars.freq_offset);
-#  else
     LOG_I(PHY, "[UE %d] Frame %d Measured Carrier Frequency %.0f Hz (offset %d Hz)\n",
-	  ue->Mod_id,
+          ue->Mod_id,
-	  ue->proc.proc_rxtx[0].frame_rx,
+          ue->proc.proc_rxtx[0].frame_rx,
-	  openair0_cfg[0].rx_freq[0]-ue->common_vars.freq_offset,
+          openair0_cfg[0].rx_freq[0]-ue->common_vars.freq_offset,
-	  ue->common_vars.freq_offset);
+          ue->common_vars.freq_offset);
-#  endif
-#endif
   } else {
-#ifdef DEBUG_INITIAL_SYNC
+    LOG_D(PHY,"[UE%d] Initial sync : PBCH not ok\n",ue->Mod_id);
-    LOG_I(PHY,"[UE%d] Initial sync : PBCH not ok\n",ue->Mod_id);
+    LOG_D(PHY,"[UE%d] Initial sync : Estimated PSS position %d, Nid2 %d\n",ue->Mod_id,sync_pos,ue->common_vars.eNb_id);
-    LOG_I(PHY,"[UE%d] Initial sync : Estimated PSS position %d, Nid2 %d\n",ue->Mod_id,sync_pos,ue->common_vars.eNb_id);
     /*      LOG_I(PHY,"[UE%d] Initial sync: (metric fdd_ncp %d (%d), metric fdd_ecp %d (%d), metric_tdd_ncp %d (%d), metric_tdd_ecp %d (%d))\n",
           ue->Mod_id,
           metric_fdd_ncp,Nid_cell_fdd_ncp,
           metric_fdd_ecp,Nid_cell_fdd_ecp,
           metric_tdd_ncp,Nid_cell_tdd_ncp,
           metric_tdd_ecp,Nid_cell_tdd_ecp);*/
-    LOG_I(PHY,"[UE%d] Initial sync : Estimated Nid_cell %d, Frame_type %d\n",ue->Mod_id,
+    LOG_D(PHY,"[UE%d] Initial sync : Estimated Nid_cell %d, Frame_type %d\n",ue->Mod_id,
           frame_parms->Nid_cell,frame_parms->frame_type);
-#endif
 
     ue->UE_mode[0] = NOT_SYNCHED;
     ue->pbch_vars[0]->pdu_errors_last=ue->pbch_vars[0]->pdu_errors;
     ue->pbch_vars[0]->pdu_errors++;
     ue->pbch_vars[0]->pdu_errors_conseq++;
-
   }
 
   // gain control
@@ -590,46 +493,28 @@ int initial_sync(PHY_VARS_UE *ue, runmode_t mode)
     // do a measurement on the best guess of the PSS
     for (aarx=0; aarx<frame_parms->nb_antennas_rx; aarx++)
       rx_power += signal_energy(&ue->common_vars.rxdata[aarx][sync_pos2],
-				frame_parms->ofdm_symbol_size+frame_parms->nb_prefix_samples);
+                                frame_parms->ofdm_symbol_size+frame_parms->nb_prefix_samples);
 
     /*
     // do a measurement on the full frame
     for (aarx=0; aarx<frame_parms->nb_antennas_rx; aarx++)
       rx_power += signal_energy(&ue->common_vars.rxdata[aarx][0],
-				frame_parms->samples_per_tti*10);
+        frame_parms->samples_per_tti*10);
     */
-
     // we might add a low-pass filter here later
     ue->measurements.rx_power_avg[0] = rx_power/frame_parms->nb_antennas_rx;
-
     ue->measurements.rx_power_avg_dB[0] = dB_fixed(ue->measurements.rx_power_avg[0]);
 
-#ifdef DEBUG_INITIAL_SYNCH
+    LOG_I(PHY,"[UE%d] Initial sync : Estimated power: %d dB\n",ue->Mod_id,ue->measurements.rx_power_avg_dB[0] );
-  LOG_I(PHY,"[UE%d] Initial sync : Estimated power: %d dB\n",ue->Mod_id,ue->measurements.rx_power_avg_dB[0] );
-#endif
 
-#ifndef OAI_USRP
+    if (IS_SOFTMODEM_BASICSIM || IS_SOFTMODEM_RFSIM )
-#ifndef OAI_BLADERF
+      phy_adjust_gain(ue,ue->measurements.rx_power_avg_dB[0],0);
-#ifndef OAI_LMSSDR
+  } else {
-  phy_adjust_gain(ue,ue->measurements.rx_power_avg_dB[0],0);
+    if (IS_SOFTMODEM_BASICSIM || IS_SOFTMODEM_RFSIM )
-#endif
+      phy_adjust_gain(ue,dB_fixed(ue->measurements.rssi),0);
-#endif
-#endif
-
-  }
-  else {
-
-#ifndef OAI_USRP
-#ifndef OAI_BLADERF
-#ifndef OAI_LMSSDR
-  phy_adjust_gain(ue,dB_fixed(ue->measurements.rssi),0);
-#endif
-#endif
-#endif
 
   }
 
-  //  exit_fun("debug exit");
   return ret;
 }
 

openair1/PHY/LTE_UE_TRANSPORT/prach_ue.c

@@ -31,6 +31,7 @@
  */
 #include "PHY/sse_intrin.h"
 #include "PHY/defs_UE.h"
+#include "targets/RT/USER/lte-softmodem.h"
 #include "PHY/phy_extern_ue.h"
 //#include "prach.h"
 #include "PHY/LTE_TRANSPORT/if4_tools.h"
@@ -43,9 +44,7 @@
 
 //#define PRACH_DEBUG 1
 
-int32_t generate_prach( PHY_VARS_UE *ue, uint8_t eNB_id, uint8_t subframe, uint16_t Nf )
+int32_t generate_prach( PHY_VARS_UE *ue, uint8_t eNB_id, uint8_t subframe, uint16_t Nf ) {
-{
-
   lte_frame_type_t frame_type         = ue->frame_parms.frame_type;
   //uint8_t tdd_config         = ue->frame_parms.tdd_config;
   uint16_t rootSequenceIndex = ue->frame_parms.prach_config_common.rootSequenceIndex;
@@ -67,7 +66,6 @@ int32_t generate_prach( PHY_VARS_UE *ue, uint8_t eNB_id, uint8_t subframe, uint1
   uint16_t preamble_offset,preamble_shift;
   uint16_t preamble_index0,n_shift_ra,n_shift_ra_bar;
   uint16_t d_start,numshift;
-
   uint8_t prach_fmt = get_prach_fmt(prach_ConfigIndex,frame_type);
   //uint8_t Nsp=2;
   //uint8_t f_ra,t1_ra;
@@ -82,50 +80,46 @@ int32_t generate_prach( PHY_VARS_UE *ue, uint8_t eNB_id, uint8_t subframe, uint1
   int i, prach_len;
   uint16_t first_nonzero_root_idx=0;
 
-#if defined(EXMIMO) || defined(OAI_USRP)
+  if ( !(IS_SOFTMODEM_BASICSIM || IS_SOFTMODEM_RFSIM) ) {
-  prach_start =  (ue->rx_offset+subframe*ue->frame_parms.samples_per_tti-ue->hw_timing_advance-ue->N_TA_offset);
+    prach_start =  (ue->rx_offset+subframe*ue->frame_parms.samples_per_tti-ue->hw_timing_advance-ue->N_TA_offset);
 #ifdef PRACH_DEBUG
     LOG_I(PHY,"[UE %d] prach_start %d, rx_offset %d, hw_timing_advance %d, N_TA_offset %d\n", ue->Mod_id,
-        prach_start,
+          prach_start,
-        ue->rx_offset,
+          ue->rx_offset,
-        ue->hw_timing_advance,
+          ue->hw_timing_advance,
-        ue->N_TA_offset);
+          ue->N_TA_offset);
 #endif
 
-  if (prach_start<0)
+    if (prach_start<0)
-    prach_start+=(ue->frame_parms.samples_per_tti*LTE_NUMBER_OF_SUBFRAMES_PER_FRAME);
+      prach_start+=(ue->frame_parms.samples_per_tti*LTE_NUMBER_OF_SUBFRAMES_PER_FRAME);
-
-  if (prach_start>=(ue->frame_parms.samples_per_tti*LTE_NUMBER_OF_SUBFRAMES_PER_FRAME))
-    prach_start-=(ue->frame_parms.samples_per_tti*LTE_NUMBER_OF_SUBFRAMES_PER_FRAME);
-
-#else //normal case (simulation)
-  prach_start = subframe*ue->frame_parms.samples_per_tti-ue->N_TA_offset;
-  LOG_I(PHY,"[UE %d] prach_start %d, rx_offset %d, hw_timing_advance %d, N_TA_offset %d\n", ue->Mod_id,
-    prach_start,
-    ue->rx_offset,
-    ue->hw_timing_advance,
-    ue->N_TA_offset);
-  
-#endif
 
+    if (prach_start>=(ue->frame_parms.samples_per_tti*LTE_NUMBER_OF_SUBFRAMES_PER_FRAME))
+      prach_start-=(ue->frame_parms.samples_per_tti*LTE_NUMBER_OF_SUBFRAMES_PER_FRAME);
+  } else { //normal case (simulation)
+    prach_start = subframe*ue->frame_parms.samples_per_tti-ue->N_TA_offset;
+    LOG_I(PHY,"[UE %d] prach_start %d, rx_offset %d, hw_timing_advance %d, N_TA_offset %d\n", ue->Mod_id,
+          prach_start,
+          ue->rx_offset,
+          ue->hw_timing_advance,
+          ue->N_TA_offset);
+  }
 
   // First compute physical root sequence
   if (restricted_set == 0) {
     AssertFatal(Ncs_config <= 15,
-		"[PHY] FATAL, Illegal Ncs_config for unrestricted format %"PRIu8"\n", Ncs_config );
+                "[PHY] FATAL, Illegal Ncs_config for unrestricted format %"PRIu8"\n", Ncs_config );
     NCS = NCS_unrestricted[Ncs_config];
   } else {
     AssertFatal(Ncs_config <= 14,
-		"[PHY] FATAL, Illegal Ncs_config for restricted format %"PRIu8"\n", Ncs_config );
+                "[PHY] FATAL, Illegal Ncs_config for restricted format %"PRIu8"\n", Ncs_config );
     NCS = NCS_restricted[Ncs_config];
   }
 
   n_ra_prb = get_prach_prb_offset(&(ue->frame_parms),
-				  ue->frame_parms.prach_config_common.prach_ConfigInfo.prach_ConfigIndex,
+                                  ue->frame_parms.prach_config_common.prach_ConfigInfo.prach_ConfigIndex,
-				  ue->frame_parms.prach_config_common.prach_ConfigInfo.prach_FreqOffset,
+                                  ue->frame_parms.prach_config_common.prach_ConfigInfo.prach_FreqOffset,
-				  tdd_mapindex, Nf);
+                                  tdd_mapindex, Nf);
   prach_root_sequence_map = (prach_fmt<4) ? prach_root_sequence_map0_3 : prach_root_sequence_map4;
-
   /*
   // this code is not part of get_prach_prb_offset
   if (frame_type == TDD) { // TDD
@@ -157,7 +151,6 @@ int32_t generate_prach( PHY_VARS_UE *ue, uint8_t eNB_id, uint8_t subframe, uint1
     }
   }
   */
-
   // This is the relative offset (for unrestricted case) in the root sequence table (5.7.2-4 from 36.211) for the given preamble index
   preamble_offset = ((NCS==0)? preamble_index : (preamble_index/(N_ZC/NCS)));
 
@@ -166,11 +159,9 @@ int32_t generate_prach( PHY_VARS_UE *ue, uint8_t eNB_id, uint8_t subframe, uint1
     preamble_shift  = (NCS==0)? 0 : (preamble_index % (N_ZC/NCS));
     preamble_shift *= NCS;
   } else { // This is the high-speed case
-
 #ifdef PRACH_DEBUG
     LOG_I(PHY,"[UE %d] High-speed mode, NCS_config %d\n",ue->Mod_id,Ncs_config);
 #endif
-
     not_found = 1;
     preamble_index0 = preamble_index;
     // set preamble_offset to initial rootSequenceIndex and look if we need more root sequences for this
@@ -190,7 +181,6 @@ int32_t generate_prach( PHY_VARS_UE *ue, uint8_t eNB_id, uint8_t subframe, uint1
       }
 
       u = prach_root_sequence_map[index];
-
       uint16_t n_group_ra = 0;
 
       if ( (du[u]<(N_ZC/3)) && (du[u]>=NCS) ) {
@@ -217,7 +207,6 @@ int32_t generate_prach( PHY_VARS_UE *ue, uint8_t eNB_id, uint8_t subframe, uint1
       if (preamble_index0 < numshift) {
         not_found      = 0;
         preamble_shift = (d_start * (preamble_index0/n_shift_ra)) + ((preamble_index0%n_shift_ra)*NCS);
-
       } else { // skip to next rootSequenceIndex and recompute parameters
         preamble_offset++;
         preamble_index0 -= numshift;
@@ -234,10 +223,8 @@ int32_t generate_prach( PHY_VARS_UE *ue, uint8_t eNB_id, uint8_t subframe, uint1
           preamble_offset,preamble_shift);
 
 #endif
-
   //  nsymb = (frame_parms->Ncp==0) ? 14:12;
   //  subframe_offset = (unsigned int)frame_parms->ofdm_symbol_size*subframe*nsymb;
-
   k = (12*n_ra_prb) - 6*ue->frame_parms.N_RB_UL;
 
   if (k<0)
@@ -245,9 +232,7 @@ int32_t generate_prach( PHY_VARS_UE *ue, uint8_t eNB_id, uint8_t subframe, uint1
 
   k*=12;
   k+=13;
-
+  Xu = (int16_t *)ue->X_u[preamble_offset-first_nonzero_root_idx];
-  Xu = (int16_t*)ue->X_u[preamble_offset-first_nonzero_root_idx];
-
   /*
     k+=(12*ue->frame_parms.first_carrier_offset);
     if (k>(12*ue->frame_parms.ofdm_symbol_size))
@@ -256,36 +241,36 @@ int32_t generate_prach( PHY_VARS_UE *ue, uint8_t eNB_id, uint8_t subframe, uint1
   k*=2;
 
   switch (ue->frame_parms.N_RB_UL) {
-  case 6:
+    case 6:
-    memset((void*)prachF,0,4*1536);
+      memset((void *)prachF,0,4*1536);
-    break;
+      break;
 
-  case 15:
+    case 15:
-    memset((void*)prachF,0,4*3072);
+      memset((void *)prachF,0,4*3072);
-    break;
+      break;
 
-  case 25:
+    case 25:
-    memset((void*)prachF,0,4*6144);
+      memset((void *)prachF,0,4*6144);
-    break;
+      break;
 
-  case 50:
+    case 50:
-    memset((void*)prachF,0,4*12288);
+      memset((void *)prachF,0,4*12288);
-    break;
+      break;
 
-  case 75:
+    case 75:
-    memset((void*)prachF,0,4*18432);
+      memset((void *)prachF,0,4*18432);
-    break;
+      break;
 
-  case 100:
+    case 100:
-    if (ue->frame_parms.threequarter_fs == 0)
+      if (ue->frame_parms.threequarter_fs == 0)
-      memset((void*)prachF,0,4*24576);
+        memset((void *)prachF,0,4*24576);
-    else
+      else
-      memset((void*)prachF,0,4*18432);
+        memset((void *)prachF,0,4*18432);
-    break;
+
+      break;
   }
 
   for (offset=0,offset2=0; offset<N_ZC; offset++,offset2+=preamble_shift) {
-
     if (offset2 >= N_ZC)
       offset2 -= N_ZC;
 
@@ -299,49 +284,49 @@ int32_t generate_prach( PHY_VARS_UE *ue, uint8_t eNB_id, uint8_t subframe, uint1
   }
 
   switch (prach_fmt) {
-  case 0:
+    case 0:
-    Ncp = 3168;
+      Ncp = 3168;
-    break;
+      break;
 
-  case 1:
+    case 1:
-  case 3:
+    case 3:
-    Ncp = 21024;
+      Ncp = 21024;
-    break;
+      break;
 
-  case 2:
+    case 2:
-    Ncp = 6240;
+      Ncp = 6240;
-    break;
+      break;
 
-  case 4:
+    case 4:
-    Ncp = 448;
+      Ncp = 448;
-    break;
+      break;
 
-  default:
+    default:
-    Ncp = 3168;
+      Ncp = 3168;
-    break;
+      break;
   }
 
   switch (ue->frame_parms.N_RB_UL) {
-  case 6:
+    case 6:
-    Ncp>>=4;
+      Ncp>>=4;
-    prach+=4; // makes prach2 aligned to 128-bit
+      prach+=4; // makes prach2 aligned to 128-bit
-    break;
+      break;
 
-  case 15:
+    case 15:
-    Ncp>>=3;
+      Ncp>>=3;
-    break;
+      break;
 
-  case 25:
+    case 25:
-    Ncp>>=2;
+      Ncp>>=2;
-    break;
+      break;
 
-  case 50:
+    case 50:
-    Ncp>>=1;
+      Ncp>>=1;
-    break;
+      break;
 
-  case 75:
+    case 75:
-    Ncp=(Ncp*3)>>2;
+      Ncp=(Ncp*3)>>2;
-    break;
+      break;
   }
 
   if (ue->frame_parms.threequarter_fs == 1)
@@ -351,186 +336,184 @@ int32_t generate_prach( PHY_VARS_UE *ue, uint8_t eNB_id, uint8_t subframe, uint1
 
   // do IDFT
   switch (ue->frame_parms.N_RB_UL) {
-  case 6:
+    case 6:
-    if (prach_fmt == 4) {
-      idft256(prachF,prach2,1);
-      memmove( prach, prach+512, Ncp<<2 );
-      prach_len = 256+Ncp;
-    } else {
-      idft1536(prachF,prach2,1);
-      memmove( prach, prach+3072, Ncp<<2 );
-      prach_len = 1536+Ncp;
-
-      if (prach_fmt>1) {
-        memmove( prach2+3072, prach2, 6144 );
-        prach_len = 2*1536+Ncp;
-      }
-    }
-
-    break;
-
-  case 15:
-    if (prach_fmt == 4) {
-      idft512(prachF,prach2,1);
-      //TODO: account for repeated format in dft output
-      memmove( prach, prach+1024, Ncp<<2 );
-      prach_len = 512+Ncp;
-    } else {
-      idft3072(prachF,prach2,1);
-      memmove( prach, prach+6144, Ncp<<2 );
-      prach_len = 3072+Ncp;
-
-      if (prach_fmt>1) {
-        memmove( prach2+6144, prach2, 12288 );
-        prach_len = 2*3072+Ncp;
-      }
-    }
-
-    break;
-
-  case 25:
-  default:
-    if (prach_fmt == 4) {
-      idft1024(prachF,prach2,1);
-      memmove( prach, prach+2048, Ncp<<2 );
-      prach_len = 1024+Ncp;
-    } else {
-      idft6144(prachF,prach2,1);
-      /*for (i=0;i<6144*2;i++)
-      prach2[i]<<=1;*/
-      memmove( prach, prach+12288, Ncp<<2 );
-      prach_len = 6144+Ncp;
-
-      if (prach_fmt>1) {
-        memmove( prach2+12288, prach2, 24576 );
-        prach_len = 2*6144+Ncp;
-      }
-    }
-
-    break;
-
-  case 50:
-    if (prach_fmt == 4) {
-      idft2048(prachF,prach2,1);
-      memmove( prach, prach+4096, Ncp<<2 );
-      prach_len = 2048+Ncp;
-    } else {
-      idft12288(prachF,prach2,1);
-      memmove( prach, prach+24576, Ncp<<2 );
-      prach_len = 12288+Ncp;
-
-      if (prach_fmt>1) {
-        memmove( prach2+24576, prach2, 49152 );
-        prach_len = 2*12288+Ncp;
-      }
-    }
-
-    break;
-
-  case 75:
-    if (prach_fmt == 4) {
-      idft3072(prachF,prach2,1);
-      //TODO: account for repeated format in dft output
-      memmove( prach, prach+6144, Ncp<<2 );
-      prach_len = 3072+Ncp;
-    } else {
-      idft18432(prachF,prach2,1);
-      memmove( prach, prach+36864, Ncp<<2 );
-      prach_len = 18432+Ncp;
-
-      if (prach_fmt>1) {
-        memmove( prach2+36834, prach2, 73728 );
-        prach_len = 2*18432+Ncp;
-      }
-    }
-
-    break;
-
-  case 100:
-    if (ue->frame_parms.threequarter_fs == 0) { 
       if (prach_fmt == 4) {
-	idft4096(prachF,prach2,1);
+        idft256(prachF,prach2,1);
-	memmove( prach, prach+8192, Ncp<<2 );
+        memmove( prach, prach+512, Ncp<<2 );
-	prach_len = 4096+Ncp;
+        prach_len = 256+Ncp;
       } else {
-	idft24576(prachF,prach2,1);
+        idft1536(prachF,prach2,1);
-	memmove( prach, prach+49152, Ncp<<2 );
+        memmove( prach, prach+3072, Ncp<<2 );
-	prach_len = 24576+Ncp;
+        prach_len = 1536+Ncp;
 
-	if (prach_fmt>1) {
+        if (prach_fmt>1) {
-	  memmove( prach2+49152, prach2, 98304 );
+          memmove( prach2+3072, prach2, 6144 );
-	  prach_len = 2* 24576+Ncp;
+          prach_len = 2*1536+Ncp;
-	}
+        }
       }
-    }
+
-    else {
+      break;
+
+    case 15:
       if (prach_fmt == 4) {
-	idft3072(prachF,prach2,1);
+        idft512(prachF,prach2,1);
-	//TODO: account for repeated format in dft output
+        //TODO: account for repeated format in dft output
-	memmove( prach, prach+6144, Ncp<<2 );
+        memmove( prach, prach+1024, Ncp<<2 );
-	prach_len = 3072+Ncp;
+        prach_len = 512+Ncp;
       } else {
-	idft18432(prachF,prach2,1);
+        idft3072(prachF,prach2,1);
-	memmove( prach, prach+36864, Ncp<<2 );
+        memmove( prach, prach+6144, Ncp<<2 );
-	prach_len = 18432+Ncp;
+        prach_len = 3072+Ncp;
-	printf("Generated prach for 100 PRB, 3/4 sampling\n");
-	if (prach_fmt>1) {
-	  memmove( prach2+36834, prach2, 73728 );
-	  prach_len = 2*18432+Ncp;
-	}
-      } 
-    }
 
-    break;
+        if (prach_fmt>1) {
+          memmove( prach2+6144, prach2, 12288 );
+          prach_len = 2*3072+Ncp;
+        }
+      }
+
+      break;
+
+    case 25:
+    default:
+      if (prach_fmt == 4) {
+        idft1024(prachF,prach2,1);
+        memmove( prach, prach+2048, Ncp<<2 );
+        prach_len = 1024+Ncp;
+      } else {
+        idft6144(prachF,prach2,1);
+        /*for (i=0;i<6144*2;i++)
+        prach2[i]<<=1;*/
+        memmove( prach, prach+12288, Ncp<<2 );
+        prach_len = 6144+Ncp;
+
+        if (prach_fmt>1) {
+          memmove( prach2+12288, prach2, 24576 );
+          prach_len = 2*6144+Ncp;
+        }
+      }
+
+      break;
+
+    case 50:
+      if (prach_fmt == 4) {
+        idft2048(prachF,prach2,1);
+        memmove( prach, prach+4096, Ncp<<2 );
+        prach_len = 2048+Ncp;
+      } else {
+        idft12288(prachF,prach2,1);
+        memmove( prach, prach+24576, Ncp<<2 );
+        prach_len = 12288+Ncp;
+
+        if (prach_fmt>1) {
+          memmove( prach2+24576, prach2, 49152 );
+          prach_len = 2*12288+Ncp;
+        }
+      }
+
+      break;
+
+    case 75:
+      if (prach_fmt == 4) {
+        idft3072(prachF,prach2,1);
+        //TODO: account for repeated format in dft output
+        memmove( prach, prach+6144, Ncp<<2 );
+        prach_len = 3072+Ncp;
+      } else {
+        idft18432(prachF,prach2,1);
+        memmove( prach, prach+36864, Ncp<<2 );
+        prach_len = 18432+Ncp;
+
+        if (prach_fmt>1) {
+          memmove( prach2+36834, prach2, 73728 );
+          prach_len = 2*18432+Ncp;
+        }
+      }
+
+      break;
+
+    case 100:
+      if (ue->frame_parms.threequarter_fs == 0) {
+        if (prach_fmt == 4) {
+          idft4096(prachF,prach2,1);
+          memmove( prach, prach+8192, Ncp<<2 );
+          prach_len = 4096+Ncp;
+        } else {
+          idft24576(prachF,prach2,1);
+          memmove( prach, prach+49152, Ncp<<2 );
+          prach_len = 24576+Ncp;
+
+          if (prach_fmt>1) {
+            memmove( prach2+49152, prach2, 98304 );
+            prach_len = 2* 24576+Ncp;
+          }
+        }
+      } else {
+        if (prach_fmt == 4) {
+          idft3072(prachF,prach2,1);
+          //TODO: account for repeated format in dft output
+          memmove( prach, prach+6144, Ncp<<2 );
+          prach_len = 3072+Ncp;
+        } else {
+          idft18432(prachF,prach2,1);
+          memmove( prach, prach+36864, Ncp<<2 );
+          prach_len = 18432+Ncp;
+          printf("Generated prach for 100 PRB, 3/4 sampling\n");
+
+          if (prach_fmt>1) {
+            memmove( prach2+36834, prach2, 73728 );
+            prach_len = 2*18432+Ncp;
+          }
+        }
+      }
+
+      break;
   }
 
   //LOG_I(PHY,"prach_len=%d\n",prach_len);
-
   AssertFatal(prach_fmt<4,
-	      "prach_fmt4 not fully implemented" );
+              "prach_fmt4 not fully implemented" );
-#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
-  int j;
-  int overflow = prach_start + prach_len - LTE_NUMBER_OF_SUBFRAMES_PER_FRAME*ue->frame_parms.samples_per_tti;
-  LOG_I( PHY, "prach_start=%d, overflow=%d\n", prach_start, overflow );
 
-  for (i=prach_start,j=0; i<min(ue->frame_parms.samples_per_tti*LTE_NUMBER_OF_SUBFRAMES_PER_FRAME,prach_start+prach_len); i++,j++) {
+  if (!(IS_SOFTMODEM_BASICSIM || IS_SOFTMODEM_RFSIM) ) {
-    ((int16_t*)ue->common_vars.txdata[0])[2*i] = prach[2*j];
+    int j;
-    ((int16_t*)ue->common_vars.txdata[0])[2*i+1] = prach[2*j+1];
+    int overflow = prach_start + prach_len - LTE_NUMBER_OF_SUBFRAMES_PER_FRAME*ue->frame_parms.samples_per_tti;
-  }
+    LOG_I( PHY, "prach_start=%d, overflow=%d\n", prach_start, overflow );
+
+    for (i=prach_start,j=0; i<min(ue->frame_parms.samples_per_tti*LTE_NUMBER_OF_SUBFRAMES_PER_FRAME,prach_start+prach_len); i++,j++) {
+      ((int16_t *)ue->common_vars.txdata[0])[2*i] = prach[2*j];
+      ((int16_t *)ue->common_vars.txdata[0])[2*i+1] = prach[2*j+1];
+    }
+
+    for (i=0; i<overflow; i++,j++) {
+      ((int16_t *)ue->common_vars.txdata[0])[2*i] = prach[2*j];
+      ((int16_t *)ue->common_vars.txdata[0])[2*i+1] = prach[2*j+1];
+    }
 
-  for (i=0; i<overflow; i++,j++) {
-    ((int16_t*)ue->common_vars.txdata[0])[2*i] = prach[2*j];
-    ((int16_t*)ue->common_vars.txdata[0])[2*i+1] = prach[2*j+1];
-  }
 #if defined(EXMIMO)
-  // handle switch before 1st TX subframe, guarantee that the slot prior to transmission is switch on
-  for (k=prach_start - (ue->frame_parms.samples_per_tti>>1) ; k<prach_start ; k++) {
-    if (k<0)
-      ue->common_vars.txdata[0][k+ue->frame_parms.samples_per_tti*LTE_NUMBER_OF_SUBFRAMES_PER_FRAME] &= 0xFFFEFFFE;
-    else if (k>(ue->frame_parms.samples_per_tti*LTE_NUMBER_OF_SUBFRAMES_PER_FRAME))
-      ue->common_vars.txdata[0][k-ue->frame_parms.samples_per_tti*LTE_NUMBER_OF_SUBFRAMES_PER_FRAME] &= 0xFFFEFFFE;
-    else
-      ue->common_vars.txdata[0][k] &= 0xFFFEFFFE;
-  }
-#endif
-#else
 
-  for (i=0; i<prach_len; i++) {
+    // handle switch before 1st TX subframe, guarantee that the slot prior to transmission is switch on
-    ((int16_t*)(&ue->common_vars.txdata[0][prach_start]))[2*i] = prach[2*i];
+    for (k=prach_start - (ue->frame_parms.samples_per_tti>>1) ; k<prach_start ; k++) {
-    ((int16_t*)(&ue->common_vars.txdata[0][prach_start]))[2*i+1] = prach[2*i+1];
+      if (k<0)
-  }
+        ue->common_vars.txdata[0][k+ue->frame_parms.samples_per_tti*LTE_NUMBER_OF_SUBFRAMES_PER_FRAME] &= 0xFFFEFFFE;
+      else if (k>(ue->frame_parms.samples_per_tti*LTE_NUMBER_OF_SUBFRAMES_PER_FRAME))
+        ue->common_vars.txdata[0][k-ue->frame_parms.samples_per_tti*LTE_NUMBER_OF_SUBFRAMES_PER_FRAME] &= 0xFFFEFFFE;
+      else
+        ue->common_vars.txdata[0][k] &= 0xFFFEFFFE;
+    }
 
 #endif
-  
+  } else { // simulators
-
+    for (i=0; i<prach_len; i++) {
+      ((int16_t *)(&ue->common_vars.txdata[0][prach_start]))[2*i] = prach[2*i];
+      ((int16_t *)(&ue->common_vars.txdata[0][prach_start]))[2*i+1] = prach[2*i+1];
+    }
+  }
 
 #if defined(PRACH_WRITE_OUTPUT_DEBUG)
   LOG_M("prach_txF0.m","prachtxF0",prachF,prach_len-Ncp,1,1);
   LOG_M("prach_tx0.m","prachtx0",prach+(Ncp<<1),prach_len-Ncp,1,1);
-  LOG_M("txsig.m","txs",(int16_t*)(&ue->common_vars.txdata[0][0]),2*ue->frame_parms.samples_per_tti,1,1);
+  LOG_M("txsig.m","txs",(int16_t *)(&ue->common_vars.txdata[0][0]),2*ue->frame_parms.samples_per_tti,1,1);
   exit(-1);
 #endif
-
+  return signal_energy( (int *)prach, 256 );
-  return signal_energy( (int*)prach, 256 );
 }
 

openair1/PHY/TOOLS/lte_enb_scope.c

@@ -0,0 +1,173 @@
+/*
+ * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.
+ * The OpenAirInterface Software Alliance licenses this file to You under
+ * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ * except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.openairinterface.org/?page_id=698
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *-------------------------------------------------------------------------------
+ * For more information about the OpenAirInterface (OAI) Software Alliance:
+ *      contact@openairinterface.org
+ */
+
+/*! \file lte_enb_scope.c
+ * \brief enb specific softsope implementation
+ * \author Nokia BellLabs France, francois Taburet
+ * \date 2019
+ * \version 0.1
+ * \company Nokia Bell-Labs France
+ * \email: francois.taburet@nokia-bell-labs.com
+ * \note
+ * \warning
+ */
+
+#include "targets/RT/USER/lte-softmodem.h"
+#include "UTIL/OPT/opt.h"
+#include "common/config/config_userapi.h"
+#include "PHY/TOOLS/lte_phy_scope.h"
+#include "targets/RT/USER/stats.h"
+
+// current status is that every UE has a DL scope for a SINGLE eNB (eNB_id=0)
+// at eNB 0, an UL scope for every UE
+FD_lte_phy_scope_ue  *form_ue[NUMBER_OF_UE_MAX];
+FD_lte_phy_scope_enb *form_enb[MAX_NUM_CCs][NUMBER_OF_UE_MAX];
+FD_stats_form                  *form_stats=NULL,*form_stats_l2=NULL;
+char title[255];
+unsigned char                   scope_enb_num_ue = 2;
+static pthread_t                forms_thread; //xforms
+int otg_enabled=0;
+
+void reset_stats(FL_OBJECT *button, long arg) {
+  int i,j,k;
+  PHY_VARS_eNB *phy_vars_eNB = RC.eNB[0][0];
+
+  for (i=0; i<NUMBER_OF_UE_MAX; i++) {
+    for (k=0; k<8; k++) { //harq_processes
+      for (j=0; j<phy_vars_eNB->dlsch[i][0]->Mlimit; j++) {
+        phy_vars_eNB->UE_stats[i].dlsch_NAK[k][j]=0;
+        phy_vars_eNB->UE_stats[i].dlsch_ACK[k][j]=0;
+        phy_vars_eNB->UE_stats[i].dlsch_trials[k][j]=0;
+      }
+
+      phy_vars_eNB->UE_stats[i].dlsch_l2_errors[k]=0;
+      phy_vars_eNB->UE_stats[i].ulsch_errors[k]=0;
+      phy_vars_eNB->UE_stats[i].ulsch_consecutive_errors=0;
+      phy_vars_eNB->UE_stats[i].dlsch_sliding_cnt=0;
+      phy_vars_eNB->UE_stats[i].dlsch_NAK_round0=0;
+      phy_vars_eNB->UE_stats[i].dlsch_mcs_offset=0;
+    }
+  }
+}
+
+
+
+
+
+static void *scope_thread_eNB(void *arg) {
+# ifdef ENABLE_XFORMS_WRITE_STATS
+  FILE *eNB_stats;
+# endif
+  struct sched_param sched_param;
+  int UE_id, CC_id;
+  int ue_cnt=0;
+  sched_param.sched_priority = sched_get_priority_min(SCHED_FIFO)+1;
+  sched_setscheduler(0, SCHED_FIFO,&sched_param);
+  printf("Scope thread has priority %d\n",sched_param.sched_priority);
+# ifdef ENABLE_XFORMS_WRITE_STATS
+  eNB_stats = fopen("eNB_stats.txt", "w");
+#endif
+
+  while (!oai_exit) {
+    ue_cnt=0;
+
+    for(UE_id=0; UE_id<NUMBER_OF_UE_MAX; UE_id++) {
+      for(CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
+        if ((ue_cnt<scope_enb_num_ue)) {
+          phy_scope_eNB(form_enb[CC_id][ue_cnt],
+                        RC.eNB[0][CC_id],
+                        UE_id);
+          ue_cnt++;
+        }
+      }
+    }
+
+    sleep(1);
+  }
+
+  //  printf("%s",stats_buffer);
+# ifdef ENABLE_XFORMS_WRITE_STATS
+
+  if (eNB_stats) {
+    rewind (eNB_stats);
+    fwrite (stats_buffer, 1, len, eNB_stats);
+    fclose (eNB_stats);
+  }
+
+# endif
+  pthread_exit((void *)arg);
+}
+
+
+int enbscope_autoinit(void) {
+  int UE_id;
+  printf("XFORMS\n");
+  int argc=config_get_if()->argc;
+  char  **argv=config_get_if()->argv;
+  fl_initialize (&argc, argv, NULL, 0, 0);
+  form_stats_l2 = create_form_stats_form();
+  fl_show_form (form_stats_l2->stats_form, FL_PLACE_HOTSPOT, FL_FULLBORDER, "l2 stats");
+  form_stats = create_form_stats_form();
+  fl_show_form (form_stats->stats_form, FL_PLACE_HOTSPOT, FL_FULLBORDER, "stats");
+
+  for(UE_id=0; UE_id<scope_enb_num_ue; UE_id++) {
+    for(int CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
+      form_enb[CC_id][UE_id] = create_lte_phy_scope_enb();
+      sprintf (title, "LTE UL SCOPE eNB for CC_id %d, UE %d",CC_id,UE_id);
+      fl_show_form (form_enb[CC_id][UE_id]->lte_phy_scope_enb, FL_PLACE_HOTSPOT, FL_FULLBORDER, title);
+
+      if (otg_enabled) {
+        fl_set_button(form_enb[CC_id][UE_id]->button_0,1);
+        fl_set_object_label(form_enb[CC_id][UE_id]->button_0,"DL Traffic ON");
+      } else {
+        fl_set_button(form_enb[CC_id][UE_id]->button_0,0);
+        fl_set_object_label(form_enb[CC_id][UE_id]->button_0,"DL Traffic OFF");
+      }
+    } // CC_id
+  } // UE_id
+
+  int ret = pthread_create(&forms_thread, NULL, scope_thread_eNB, NULL);
+
+  if (ret == 0)
+    pthread_setname_np( forms_thread, "xforms" );
+
+  printf("Scope thread created, ret=%d\n",ret);
+  return 0;
+} // start_forms_eNB
+
+
+
+void end_forms(void) {
+  printf("waiting for XFORMS thread\n");
+  pthread_join(forms_thread,NULL);
+  fl_hide_form(form_stats->stats_form);
+  fl_free_form(form_stats->stats_form);
+  fl_hide_form(form_stats_l2->stats_form);
+  fl_free_form(form_stats_l2->stats_form);
+
+  for(int UE_id=0; UE_id<scope_enb_num_ue; UE_id++) {
+    for(int CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
+      fl_hide_form(form_enb[CC_id][UE_id]->lte_phy_scope_enb);
+      fl_free_form(form_enb[CC_id][UE_id]->lte_phy_scope_enb);
+    }
+  }
+} // end_forms
+

openair1/PHY/TOOLS/lte_phy_scope.c

@@ -154,7 +154,7 @@ void phy_scope_eNB(FD_lte_phy_scope_enb *form,
                    PHY_VARS_eNB *phy_vars_enb,
                    int UE_id)
 {
-  int eNB_id = 0;
+
   int i,i2,arx,atx,ind,k;
   LTE_DL_FRAME_PARMS *frame_parms = &phy_vars_enb->frame_parms;
   int nsymb_ce = 12*frame_parms->N_RB_UL*frame_parms->symbols_per_tti;
@@ -197,10 +197,10 @@ void phy_scope_eNB(FD_lte_phy_scope_enb *form,
   llr = (float*) calloc(coded_bits_per_codeword,sizeof(float)); // init to zero
   bit = malloc(coded_bits_per_codeword*sizeof(float));
 
-  rxsig_t = (int16_t**) phy_vars_enb->common_vars.rxdata[eNB_id];
+  rxsig_t = (int16_t**) phy_vars_enb->RU_list[0]->common.rxdata;
   //chest_t = (int16_t**) phy_vars_enb->pusch_vars[UE_id]->drs_ch_estimates_time[eNB_id];
-  chest_t = (int16_t**) phy_vars_enb->srs_vars[UE_id].srs_ch_estimates[eNB_id];
+  chest_t = (int16_t**) phy_vars_enb->srs_vars[UE_id].srs_ch_estimates;
-  chest_f = (int16_t**) phy_vars_enb->pusch_vars[UE_id]->drs_ch_estimates[eNB_id];
+  chest_f = (int16_t**) phy_vars_enb->pusch_vars[UE_id]->drs_ch_estimates;
   pusch_llr = (int16_t*) phy_vars_enb->pusch_vars[UE_id]->llr;
   pusch_comp = (int32_t*) phy_vars_enb->pusch_vars[UE_id]->rxdataF_comp[0];
   pucch1_comp = (int32_t*) phy_vars_enb->pucch1_stats[UE_id];
@@ -209,7 +209,7 @@ void phy_scope_eNB(FD_lte_phy_scope_enb *form,
 
   // Received signal in time domain of receive antenna 0
   if (rxsig_t != NULL) {
-    if (rxsig_t[0] != NULL) {
+    if (rxsig_t[0] != NULL ) {
       for (i=0; i<FRAME_LENGTH_COMPLEX_SAMPLES; i++) {
         rxsig_t_dB[0][i] = 10*log10(1.0+(float) ((rxsig_t[0][2*i])*(rxsig_t[0][2*i])+(rxsig_t[0][2*i+1])*(rxsig_t[0][2*i+1])));
         time[i] = (float) i;

openair1/PHY/TOOLS/lte_ue_scope.c

@@ -0,0 +1,150 @@
+/*
+ * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.
+ * The OpenAirInterface Software Alliance licenses this file to You under
+ * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ * except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.openairinterface.org/?page_id=698
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *-------------------------------------------------------------------------------
+ * For more information about the OpenAirInterface (OAI) Software Alliance:
+ *      contact@openairinterface.org
+ */
+
+
+/*! \file lte_ue_scope.c
+ * \brief UE specific softsope implementation
+ * \author Nokia BellLabs France, francois Taburet
+ * \date 2019
+ * \version 0.1
+ * \company Nokia Bell-Labs France
+ * \email: francois.taburet@nokia-bell-labs.com
+ * \note
+ * \warning
+ */
+
+#include "targets/RT/USER/lte-softmodem.h"
+#include "UTIL/OPT/opt.h"
+#include "common/config/config_userapi.h"
+#include "PHY/TOOLS/lte_phy_scope.h"
+#include "targets/RT/USER/stats.h"
+#include "PHY/phy_vars_ue.h"
+// current status is that every UE has a DL scope for a SINGLE eNB (eNB_id=0)
+// at eNB 0, an UL scope for every UE
+FD_lte_phy_scope_ue  *form_ue[NUMBER_OF_UE_MAX];
+FD_lte_phy_scope_enb *form_enb[MAX_NUM_CCs][NUMBER_OF_UE_MAX];
+FD_stats_form                  *form_stats=NULL,*form_stats_l2=NULL;
+char title[255];
+unsigned char                   scope_enb_num_ue = 2;
+static pthread_t                forms_thread; //xforms
+
+
+void reset_stats(FL_OBJECT *button, long arg) {
+  int i,j,k;
+  PHY_VARS_eNB *phy_vars_eNB = RC.eNB[0][0];
+
+  for (i=0; i<NUMBER_OF_UE_MAX; i++) {
+    for (k=0; k<8; k++) { //harq_processes
+      for (j=0; j<phy_vars_eNB->dlsch[i][0]->Mlimit; j++) {
+        phy_vars_eNB->UE_stats[i].dlsch_NAK[k][j]=0;
+        phy_vars_eNB->UE_stats[i].dlsch_ACK[k][j]=0;
+        phy_vars_eNB->UE_stats[i].dlsch_trials[k][j]=0;
+      }
+
+      phy_vars_eNB->UE_stats[i].dlsch_l2_errors[k]=0;
+      phy_vars_eNB->UE_stats[i].ulsch_errors[k]=0;
+      phy_vars_eNB->UE_stats[i].ulsch_consecutive_errors=0;
+      phy_vars_eNB->UE_stats[i].dlsch_sliding_cnt=0;
+      phy_vars_eNB->UE_stats[i].dlsch_NAK_round0=0;
+      phy_vars_eNB->UE_stats[i].dlsch_mcs_offset=0;
+    }
+  }
+}
+
+
+static void *scope_thread_UE(void *arg) {
+  char stats_buffer[16384];
+# ifdef ENABLE_XFORMS_WRITE_STATS
+  FILE *UE_stats, *eNB_stats;
+# endif
+  struct sched_param sched_param;
+  sched_param.sched_priority = sched_get_priority_min(SCHED_FIFO)+1;
+  sched_setscheduler(0, SCHED_FIFO,&sched_param);
+  printf("Scope thread has priority %d\n",sched_param.sched_priority);
+# ifdef ENABLE_XFORMS_WRITE_STATS
+  UE_stats  = fopen("UE_stats.txt", "w");
+#endif
+
+  while (!oai_exit) {
+    //      dump_ue_stats (PHY_vars_UE_g[0][0], &PHY_vars_UE_g[0][0]->proc.proc_rxtx[0],stats_buffer, 0, mode,rx_input_level_dBm);
+    //fl_set_object_label(form_stats->stats_text, stats_buffer);
+    fl_clear_browser(form_stats->stats_text);
+    fl_add_browser_line(form_stats->stats_text, stats_buffer);
+    phy_scope_UE(form_ue[0],
+                 PHY_vars_UE_g[0][0],
+                 0,
+                 0,7);
+    //  printf("%s",stats_buffer);
+  }
+
+# ifdef ENABLE_XFORMS_WRITE_STATS
+
+  if (UE_stats) {
+    rewind (UE_stats);
+    fwrite (stats_buffer, 1, len, UE_stats);
+    fclose (UE_stats);
+  }
+
+# endif
+  pthread_exit((void *)arg);
+}
+
+
+int uescope_autoinit(void) {
+  int UE_id;
+  int argc=config_get_if()->argc;
+  char  **argv=config_get_if()->argv;
+  printf("XFORMS\n");
+  fl_initialize (&argc, argv, NULL, 0, 0);
+  form_stats = create_form_stats_form();
+  fl_show_form (form_stats->stats_form, FL_PLACE_HOTSPOT, FL_FULLBORDER, "stats");
+  UE_id = 0;
+  form_ue[UE_id] = create_lte_phy_scope_ue();
+  sprintf (title, "LTE DL SCOPE UE");
+  fl_show_form (form_ue[UE_id]->lte_phy_scope_ue, FL_PLACE_HOTSPOT, FL_FULLBORDER, title);
+  /*
+  if (openair_daq_vars.use_ia_receiver) {
+  fl_set_button(form_ue[UE_id]->button_0,1);
+  fl_set_object_label(form_ue[UE_id]->button_0, "IA Receiver ON");
+  } else {
+  fl_set_button(form_ue[UE_id]->button_0,0);
+  fl_set_object_label(form_ue[UE_id]->button_0, "IA Receiver OFF");
+  }*/
+  fl_set_button(form_ue[UE_id]->button_0,0);
+  fl_set_object_label(form_ue[UE_id]->button_0, "IA Receiver OFF");
+  int ret = pthread_create(&forms_thread, NULL, scope_thread_UE, NULL);
+
+  if (ret == 0)
+    pthread_setname_np( forms_thread, "xforms" );
+
+  printf("Scope thread created, ret=%d\n",ret);
+  return 0;
+} // start_forms_UE
+
+
+void end_forms(void) {
+  printf("waiting for XFORMS thread\n");
+  pthread_join(forms_thread,NULL);
+  fl_hide_form(form_stats->stats_form);
+  fl_free_form(form_stats->stats_form);
+  fl_hide_form(form_ue[0]->lte_phy_scope_ue);
+  fl_free_form(form_ue[0]->lte_phy_scope_ue);
+} // end_forms

openair1/PHY/TOOLS/phy_scope_interface.c

@@ -0,0 +1,53 @@
+/*
+ * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.
+ * The OpenAirInterface Software Alliance licenses this file to You under
+ * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ * except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.openairinterface.org/?page_id=698
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *-------------------------------------------------------------------------------
+ * For more information about the OpenAirInterface (OAI) Software Alliance:
+ *      contact@openairinterface.org
+ */
+
+/*! \file openair1/PHY/TOOLS/phy_scope_interface.c
+ * \brief soft scope API interface implementation
+ * \author Nokia BellLabs France, francois Taburet
+ * \date 2019
+ * \version 0.1
+ * \company Nokia BellLabs France
+ * \email: francois.taburet@nokia-bell-labs.com
+ * \note
+ * \warning
+ */
+#include <stdio.h>
+#include "common/config/config_userapi.h"
+#include "common/utils/load_module_shlib.h"
+#include "phy_scope_interface.h"
+
+#define SOFTSCOPE_ENDFUNC_IDX 0
+static  loader_shlibfunc_t scope_fdesc[]= {{"end_forms",NULL}};
+
+int load_softscope(char *exectype) {
+  char libname[64];
+  sprintf(libname,"%.10sscope",exectype);
+  return load_module_shlib(libname,scope_fdesc,1,NULL);
+}
+
+int end_forms(void) {
+  if (scope_fdesc[SOFTSCOPE_ENDFUNC_IDX].fptr) {
+    scope_fdesc[SOFTSCOPE_ENDFUNC_IDX].fptr();
+    return 0;
+  }
+
+  return -1;
+}

openair1/PHY/TOOLS/phy_scope_interface.h

@@ -0,0 +1,37 @@
+/*
+ * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.
+ * The OpenAirInterface Software Alliance licenses this file to You under
+ * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ * except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.openairinterface.org/?page_id=698
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *-------------------------------------------------------------------------------
+ * For more information about the OpenAirInterface (OAI) Software Alliance:
+ *      contact@openairinterface.org
+ */
+
+/*! \file phy_scope_interface.h
+ * \brief softscope interface API include file
+ * \author Nokia BellLabs France, francois Taburet
+ * \date 2019
+ * \version 0.1
+ * \company Nokia BellLabs France
+ * \email: francois.taburet@nokia-bell-labs.com
+ * \note
+ * \warning
+ */
+
+
+int load_softscope(char *exectype);
+int end_forms(void) ;
+
+

openair1/SCHED_UE/phy_procedures_lte_ue.c

@@ -76,9 +76,8 @@ extern double cpuf;
 void Msg1_transmitted(module_id_t module_idP,uint8_t CC_id,frame_t frameP, uint8_t eNB_id);
 void Msg3_transmitted(module_id_t module_idP,uint8_t CC_id,frame_t frameP, uint8_t eNB_id);
 
-#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
+extern uint32_t downlink_frequency[MAX_NUM_CCs][4];
-  extern uint32_t downlink_frequency[MAX_NUM_CCs][4];
+
-#endif
 
 void get_dumpparam(PHY_VARS_UE *ue,UE_rxtx_proc_t *proc,uint8_t eNB_id, uint8_t nb_rb,
                    uint32_t *alloc_even, uint8_t subframe,uint32_t Qm, uint32_t Nl, uint32_t tm,
@@ -160,47 +159,7 @@ void dump_dlsch_SI(PHY_VARS_UE *ue,UE_rxtx_proc_t *proc,uint8_t eNB_id,uint8_t s
   }
 }
 
-#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
-//unsigned int gain_table[31] = {100,112,126,141,158,178,200,224,251,282,316,359,398,447,501,562,631,708,794,891,1000,1122,1258,1412,1585,1778,1995,2239,2512,2818,3162};
-/*
-  unsigned int get_tx_amp_prach(int power_dBm, int power_max_dBm, int N_RB_UL)
-  {
 
-  int gain_dB = power_dBm - power_max_dBm;
-  int amp_x_100;
-
-  switch (N_RB_UL) {
-  case 6:
-  amp_x_100 = AMP;      // PRACH is 6 PRBS so no scale
-  break;
-  case 15:
-  amp_x_100 = 158*AMP;  // 158 = 100*sqrt(15/6)
-  break;
-  case 25:
-  amp_x_100 = 204*AMP;  // 204 = 100*sqrt(25/6)
-  break;
-  case 50:
-  amp_x_100 = 286*AMP;  // 286 = 100*sqrt(50/6)
-  break;
-  case 75:
-  amp_x_100 = 354*AMP;  // 354 = 100*sqrt(75/6)
-  break;
-  case 100:
-  amp_x_100 = 408*AMP;  // 408 = 100*sqrt(100/6)
-  break;
-  default:
-  LOG_E(PHY,"Unknown PRB size %d\n",N_RB_UL);
-  mac_xface->macphy_exit("");
-  break;
-  }
-  if (gain_dB < -30) {
-  return(amp_x_100/3162);
-  } else if (gain_dB>0)
-  return(amp_x_100);
-  else
-  return(amp_x_100/gain_table[-gain_dB]);  // 245 corresponds to the factor sqrt(25/6)
-  }
-*/
 
 unsigned int get_tx_amp(int power_dBm, int power_max_dBm, int N_RB_UL, int nb_rb) {
   int gain_dB;
@@ -216,7 +175,6 @@ unsigned int get_tx_amp(int power_dBm, int power_max_dBm, int N_RB_UL, int nb_rb
   return((int)(AMP*sqrt(gain_lin*N_RB_UL/(double)nb_rb)));
 }
 
-#endif
 
 void dump_dlsch_ra(PHY_VARS_UE *ue,UE_rxtx_proc_t *proc,uint8_t eNB_id,uint8_t subframe) {
   if (LOG_DUMPFLAG(DEBUG_UE_PHYPROC)) {
@@ -1130,10 +1088,8 @@ void ulsch_common_procedures(PHY_VARS_UE *ue, UE_rxtx_proc_t *proc, uint8_t empt
   int subframe_tx = proc->subframe_tx;
   int ulsch_start;
   int overflow=0;
-#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
   int k,l;
   int dummy_tx_buffer[frame_parms->samples_per_tti] __attribute__((aligned(16)));
-#endif
   VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_PROCEDURES_UE_TX_ULSCH_COMMON,VCD_FUNCTION_IN);
 
   if ( LOG_DEBUGFLAG(UE_TIMING)) {
@@ -1141,23 +1097,21 @@ void ulsch_common_procedures(PHY_VARS_UE *ue, UE_rxtx_proc_t *proc, uint8_t empt
   }
 
   nsymb = (frame_parms->Ncp == 0) ? 14 : 12;
-#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)//this is the EXPRESS MIMO case
-  ulsch_start = (ue->rx_offset+subframe_tx*frame_parms->samples_per_tti-
-                 ue->hw_timing_advance-
-                 ue->timing_advance-
-                 ue->N_TA_offset+5);
-  //LOG_E(PHY,"ul-signal [subframe: %d, ulsch_start %d]\n",subframe_tx, ulsch_start);
 
-  if(ulsch_start < 0)
+  if (!(IS_SOFTMODEM_BASICSIM || IS_SOFTMODEM_RFSIM) ) {
-    ulsch_start = ulsch_start + (LTE_NUMBER_OF_SUBFRAMES_PER_FRAME*frame_parms->samples_per_tti);
+    ulsch_start = (ue->rx_offset+subframe_tx*frame_parms->samples_per_tti-
+                   ue->hw_timing_advance-
+                   ue->timing_advance-
+                   ue->N_TA_offset+5);
 
-  if (ulsch_start > (LTE_NUMBER_OF_SUBFRAMES_PER_FRAME*frame_parms->samples_per_tti))
+    if(ulsch_start < 0)
-    ulsch_start = ulsch_start % (LTE_NUMBER_OF_SUBFRAMES_PER_FRAME*frame_parms->samples_per_tti);
+      ulsch_start = ulsch_start + (LTE_NUMBER_OF_SUBFRAMES_PER_FRAME*frame_parms->samples_per_tti);
 
-  //LOG_E(PHY,"ul-signal [subframe: %d, ulsch_start %d]\n",subframe_tx, ulsch_start);
+    if (ulsch_start > (LTE_NUMBER_OF_SUBFRAMES_PER_FRAME*frame_parms->samples_per_tti))
-#else //this is the normal case
+      ulsch_start = ulsch_start % (LTE_NUMBER_OF_SUBFRAMES_PER_FRAME*frame_parms->samples_per_tti);
-  ulsch_start = (frame_parms->samples_per_tti*subframe_tx)-ue->N_TA_offset; //-ue->timing_advance;
+  } else { //this is the simulators case
-#endif //else EXMIMO
+    ulsch_start = (frame_parms->samples_per_tti*subframe_tx)-ue->N_TA_offset; //-ue->timing_advance;
+  }
 
   if (empty_subframe) {
     overflow = ulsch_start - 9*frame_parms->samples_per_tti;
@@ -1175,70 +1129,63 @@ void ulsch_common_procedures(PHY_VARS_UE *ue, UE_rxtx_proc_t *proc, uint8_t empt
   }
 
   for (aa=0; aa<frame_parms->nb_antennas_tx; aa++) {
-    if (frame_parms->Ncp == 1)
+    int *Buff = (IS_SOFTMODEM_BASICSIM || IS_SOFTMODEM_RFSIM) ? &ue->common_vars.txdata[aa][ulsch_start] :dummy_tx_buffer;
+
+    if (frame_parms->Ncp == 1) {
       PHY_ofdm_mod(&ue->common_vars.txdataF[aa][subframe_tx*nsymb*frame_parms->ofdm_symbol_size],
-#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
+                   Buff,
-                   dummy_tx_buffer,
-#else
-                   &ue->common_vars.txdata[aa][ulsch_start],
-#endif
                    frame_parms->ofdm_symbol_size,
                    nsymb,
                    frame_parms->nb_prefix_samples,
                    CYCLIC_PREFIX);
-    else {
+    } else {
       normal_prefix_mod(&ue->common_vars.txdataF[aa][subframe_tx*nsymb*frame_parms->ofdm_symbol_size],
-#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
+                        Buff,
-                        dummy_tx_buffer,
-#else
-                        &ue->common_vars.txdata[aa][ulsch_start],
-#endif
                         nsymb>>1,
                         &ue->frame_parms);
+      Buff += (frame_parms->samples_per_tti>>1);
       normal_prefix_mod(&ue->common_vars.txdataF[aa][((subframe_tx*nsymb)+(nsymb>>1))*frame_parms->ofdm_symbol_size],
-#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
+                        Buff,
-                        dummy_tx_buffer+(frame_parms->samples_per_tti>>1),
-#else
-                        &ue->common_vars.txdata[aa][ulsch_start+(frame_parms->samples_per_tti>>1)],
-#endif
                         nsymb>>1,
                         &ue->frame_parms);
     }
 
-#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
+    if (IS_SOFTMODEM_BASICSIM || IS_SOFTMODEM_RFSIM ) {
-    apply_7_5_kHz(ue,dummy_tx_buffer,0);
+      apply_7_5_kHz(ue,&ue->common_vars.txdata[aa][ulsch_start],0);
-    apply_7_5_kHz(ue,dummy_tx_buffer,1);
+      apply_7_5_kHz(ue,&ue->common_vars.txdata[aa][ulsch_start],1);
-#else
+    } else {
-    apply_7_5_kHz(ue,&ue->common_vars.txdata[aa][ulsch_start],0);
+      apply_7_5_kHz(ue,dummy_tx_buffer,0);
-    apply_7_5_kHz(ue,&ue->common_vars.txdata[aa][ulsch_start],1);
+      apply_7_5_kHz(ue,dummy_tx_buffer,1);
-#endif
-#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
-    overflow = ulsch_start - 9*frame_parms->samples_per_tti;
-
-    for (k=ulsch_start,l=0; k<cmin(frame_parms->samples_per_tti*LTE_NUMBER_OF_SUBFRAMES_PER_FRAME,ulsch_start+frame_parms->samples_per_tti); k++,l++) {
-      ((short *)ue->common_vars.txdata[aa])[2*k] = ((short *)dummy_tx_buffer)[2*l];
-      ((short *)ue->common_vars.txdata[aa])[2*k+1] = ((short *)dummy_tx_buffer)[2*l+1];
     }
 
-    for (k=0; k<overflow; k++,l++) {
+    if (!(IS_SOFTMODEM_BASICSIM || IS_SOFTMODEM_RFSIM) ) {
-      ((short *)ue->common_vars.txdata[aa])[2*k] = ((short *)dummy_tx_buffer)[2*l];
+      overflow = ulsch_start - 9*frame_parms->samples_per_tti;
-      ((short *)ue->common_vars.txdata[aa])[2*k+1] = ((short *)dummy_tx_buffer)[2*l+1];
+
-    }
+      for (k=ulsch_start,l=0; k<cmin(frame_parms->samples_per_tti*LTE_NUMBER_OF_SUBFRAMES_PER_FRAME,ulsch_start+frame_parms->samples_per_tti); k++,l++) {
+        ((short *)ue->common_vars.txdata[aa])[2*k] = ((short *)dummy_tx_buffer)[2*l];
+        ((short *)ue->common_vars.txdata[aa])[2*k+1] = ((short *)dummy_tx_buffer)[2*l+1];
+      }
+
+      for (k=0; k<overflow; k++,l++) {
+        ((short *)ue->common_vars.txdata[aa])[2*k] = ((short *)dummy_tx_buffer)[2*l];
+        ((short *)ue->common_vars.txdata[aa])[2*k+1] = ((short *)dummy_tx_buffer)[2*l+1];
+      }
 
 #if defined(EXMIMO)
 
-    // handle switch before 1st TX subframe, guarantee that the slot prior to transmission is switch on
+      // handle switch before 1st TX subframe, guarantee that the slot prior to transmission is switch on
-    for (k=ulsch_start - (frame_parms->samples_per_tti>>1) ; k<ulsch_start ; k++) {
+      for (k=ulsch_start - (frame_parms->samples_per_tti>>1) ; k<ulsch_start ; k++) {
-      if (k<0)
+        if (k<0)
-        ue->common_vars.txdata[aa][k+frame_parms->samples_per_tti*LTE_NUMBER_OF_SUBFRAMES_PER_FRAME] &= 0xFFFEFFFE;
+          ue->common_vars.txdata[aa][k+frame_parms->samples_per_tti*LTE_NUMBER_OF_SUBFRAMES_PER_FRAME] &= 0xFFFEFFFE;
-      else if (k>(frame_parms->samples_per_tti*LTE_NUMBER_OF_SUBFRAMES_PER_FRAME))
+        else if (k>(frame_parms->samples_per_tti*LTE_NUMBER_OF_SUBFRAMES_PER_FRAME))
-        ue->common_vars.txdata[aa][k-frame_parms->samples_per_tti*LTE_NUMBER_OF_SUBFRAMES_PER_FRAME] &= 0xFFFEFFFE;
+          ue->common_vars.txdata[aa][k-frame_parms->samples_per_tti*LTE_NUMBER_OF_SUBFRAMES_PER_FRAME] &= 0xFFFEFFFE;
-      else
+        else
-        ue->common_vars.txdata[aa][k] &= 0xFFFEFFFE;
+          ue->common_vars.txdata[aa][k] &= 0xFFFEFFFE;
-    }
+      }
 
 #endif
-#endif
+    }
+
     /*
     only for debug
     LOG_I(PHY,"ul-signal [subframe: %d, ulsch_start %d, TA: %d, rxOffset: %d, timing_advance: %d, hw_timing_advance: %d]\n",subframe_tx, ulsch_start, ue->N_TA_offset, ue->rx_offset, ue->timing_advance, ue->hw_timing_advance);
@@ -1310,14 +1257,15 @@ void ue_prach_procedures(PHY_VARS_UE *ue,UE_rxtx_proc_t *proc,uint8_t eNB_id,uin
           ue->prach_resources[eNB_id]->ra_TDD_map_index,
           ue->prach_resources[eNB_id]->ra_RNTI);
     ue->tx_total_RE[subframe_tx] = 96;
-#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
+
-    ue->prach_vars[eNB_id]->amp = get_tx_amp(ue->tx_power_dBm[subframe_tx],
+    if (IS_SOFTMODEM_BASICSIM || IS_SOFTMODEM_RFSIM ) {
-                                  ue->tx_power_max_dBm,
+      ue->prach_vars[eNB_id]->amp = get_tx_amp(ue->tx_power_dBm[subframe_tx],
-                                  ue->frame_parms.N_RB_UL,
+                                    ue->tx_power_max_dBm,
-                                  6);
+                                    ue->frame_parms.N_RB_UL,
-#else
+                                    6);
-    ue->prach_vars[eNB_id]->amp = AMP;
+    } else {
-#endif
+      ue->prach_vars[eNB_id]->amp = AMP;
+    }
 
     if ((mode == calib_prach_tx) && (((proc->frame_tx&0xfffe)%100)==0))
       LOG_D(PHY,"[UE  %d][RAPROC] Frame %d, Subframe %d : PRACH TX power %d dBm, amp %d\n",
@@ -1333,12 +1281,12 @@ void ue_prach_procedures(PHY_VARS_UE *ue,UE_rxtx_proc_t *proc,uint8_t eNB_id,uin
     VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_UE_GENERATE_PRACH, VCD_FUNCTION_OUT);
     //      stop_meas(&ue->tx_prach);
     LOG_I(PHY,"[UE  %d][RAPROC] PRACH PL %d dB, power %d dBm (max %d dBm), digital power %d dB (amp %d)\n",
-	  ue->Mod_id,
+          ue->Mod_id,
-	  get_PL(ue->Mod_id,ue->CC_id,eNB_id),
+          get_PL(ue->Mod_id,ue->CC_id,eNB_id),
-	  ue->tx_power_dBm[subframe_tx],
+          ue->tx_power_dBm[subframe_tx],
           ue->tx_power_max_dBm,
-	  dB_fixed(prach_power),
+          dB_fixed(prach_power),
-	  ue->prach_vars[eNB_id]->amp);
+          ue->prach_vars[eNB_id]->amp);
 
     if (ue->mac_enabled==1) {
       Msg1_transmitted(ue->Mod_id,
@@ -1680,14 +1628,16 @@ void ue_ulsch_uespec_procedures(PHY_VARS_UE *ue,UE_rxtx_proc_t *proc,uint8_t eNB
       }
 
       ue->tx_total_RE[subframe_tx] = nb_rb*12;
-#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
+
-      tx_amp = get_tx_amp(ue->tx_power_dBm[subframe_tx],
+      if (IS_SOFTMODEM_BASICSIM || IS_SOFTMODEM_RFSIM ) {
-                          ue->tx_power_max_dBm,
+        tx_amp = AMP;
-                          ue->frame_parms.N_RB_UL,
+      } else {
-                          nb_rb);
+        tx_amp = get_tx_amp(ue->tx_power_dBm[subframe_tx],
-#else
+                            ue->tx_power_max_dBm,
-      tx_amp = AMP;
+                            ue->frame_parms.N_RB_UL,
-#endif
+                            nb_rb);
+      }
+
       T(T_UE_PHY_PUSCH_TX_POWER, T_INT(eNB_id), T_INT(frame_tx%1024), T_INT(subframe_tx),T_INT(ue->tx_power_dBm[subframe_tx]),
         T_INT(tx_amp),T_INT(ue->ulsch[eNB_id]->f_pusch),T_INT(get_PL(Mod_id,0,eNB_id)),T_INT(nb_rb));
 
@@ -1751,20 +1701,19 @@ void ue_srs_procedures(PHY_VARS_UE *ue,UE_rxtx_proc_t *proc,uint8_t eNB_id,uint8
       Po_SRS = ue->tx_power_max_dBm;
     }
 
-#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
+    if (IS_SOFTMODEM_BASICSIM || IS_SOFTMODEM_RFSIM ) {
-
-    if (ue->mac_enabled==1) {
-      tx_amp = get_tx_amp(Po_SRS,
-                          ue->tx_power_max_dBm,
-                          ue->frame_parms.N_RB_UL,
-                          nb_rb_srs);
-    } else {
       tx_amp = AMP;
+    } else {
+      if (ue->mac_enabled==1) {
+        tx_amp = get_tx_amp(Po_SRS,
+                            ue->tx_power_max_dBm,
+                            ue->frame_parms.N_RB_UL,
+                            nb_rb_srs);
+      } else {
+        tx_amp = AMP;
+      }
     }
 
-#else
-    tx_amp = AMP;
-#endif
     LOG_D(PHY,"SRS PROC; TX_MAX_POWER %d, Po_SRS %d, NB_RB_UL %d, NB_RB_SRS %d TX_AMPL %d\n",ue->tx_power_max_dBm,
           Po_SRS,
           ue->frame_parms.N_RB_UL,
@@ -1903,7 +1852,6 @@ void ue_pucch_procedures(PHY_VARS_UE *ue,UE_rxtx_proc_t *proc,uint8_t eNB_id,uin
 
   uint8_t isShortenPucch = (pSoundingrs_ul_config_dedicated->srsCellSubframe && frame_parms->soundingrs_ul_config_common.ackNackSRS_SimultaneousTransmission);
   bundling_flag = ue->pucch_config_dedicated[eNB_id].tdd_AckNackFeedbackMode;
-
   // Part - I
   // Collect feedback that should be transmitted at this subframe
   // - SR
@@ -1990,14 +1938,16 @@ void ue_pucch_procedures(PHY_VARS_UE *ue,UE_rxtx_proc_t *proc,uint8_t eNB_id,uin
 
       ue->tx_power_dBm[subframe_tx] = Po_PUCCH;
       ue->tx_total_RE[subframe_tx] = 12;
-#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
+
-      tx_amp = get_tx_amp(Po_PUCCH,
+      if (IS_SOFTMODEM_BASICSIM || IS_SOFTMODEM_RFSIM ) {
-                          ue->tx_power_max_dBm,
+        tx_amp = AMP;
-                          ue->frame_parms.N_RB_UL,
+      } else {
-                          1);
+        tx_amp = get_tx_amp(Po_PUCCH,
-#else
+                            ue->tx_power_max_dBm,
-      tx_amp = AMP;
+                            ue->frame_parms.N_RB_UL,
-#endif
+                            1);
+      }
+
       T(T_UE_PHY_PUCCH_TX_POWER, T_INT(eNB_id), T_INT(frame_tx%1024), T_INT(subframe_tx),T_INT(ue->tx_power_dBm[subframe_tx]),
         T_INT(tx_amp),T_INT(ue->dlsch[ue->current_thread_id[proc->subframe_rx]][eNB_id][0]->g_pucch),T_INT(get_PL(ue->Mod_id,ue->CC_id,eNB_id)));
 
@@ -2069,14 +2019,16 @@ void ue_pucch_procedures(PHY_VARS_UE *ue,UE_rxtx_proc_t *proc,uint8_t eNB_id,uin
 
       ue->tx_power_dBm[subframe_tx] = Po_PUCCH;
       ue->tx_total_RE[subframe_tx] = 12;
-#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
+
-      tx_amp =  get_tx_amp(Po_PUCCH,
+      if (IS_SOFTMODEM_BASICSIM || IS_SOFTMODEM_RFSIM ) {
-                           ue->tx_power_max_dBm,
+        tx_amp = AMP;
-                           ue->frame_parms.N_RB_UL,
+      } else {
-                           1);
+        tx_amp =  get_tx_amp(Po_PUCCH,
-#else
+                             ue->tx_power_max_dBm,
-      tx_amp = AMP;
+                             ue->frame_parms.N_RB_UL,
-#endif
+                             1);
+      }
+
       T(T_UE_PHY_PUCCH_TX_POWER, T_INT(eNB_id), T_INT(frame_tx%1024), T_INT(subframe_tx),T_INT(ue->tx_power_dBm[subframe_tx]),
         T_INT(tx_amp),T_INT(ue->dlsch[ue->current_thread_id[proc->subframe_rx]][eNB_id][0]->g_pucch),T_INT(get_PL(ue->Mod_id,ue->CC_id,eNB_id)));
 
@@ -2313,13 +2265,10 @@ void ue_measurement_procedures(
   if (( (slot%2) == 0) && (l==(4-frame_parms->Ncp))) {
     // AGC
     VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_UE_GAIN_CONTROL, VCD_FUNCTION_IN);
-#ifndef OAI_USRP
+
-#ifndef OAI_BLADERF
+    if (IS_SOFTMODEM_BASICSIM || IS_SOFTMODEM_RFSIM )
-#ifndef OAI_LMSSDR
+      phy_adjust_gain (ue,dB_fixed(ue->measurements.rssi),0);
-    phy_adjust_gain (ue,dB_fixed(ue->measurements.rssi),0);
+
-#endif
-#endif
-#endif
     VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_UE_GAIN_CONTROL, VCD_FUNCTION_OUT);
     eNB_id = 0;
 
@@ -2752,6 +2701,7 @@ int ue_pdcch_procedures(uint8_t eNB_id,PHY_VARS_UE *ue,UE_rxtx_proc_t *proc,uint
           T_INT(ue->ulsch[eNB_id]->harq_processes[harq_pid]->first_rb),
           T_INT(ue->ulsch[eNB_id]->harq_processes[harq_pid]->nb_rb),
           T_INT(ue->ulsch[eNB_id]->harq_processes[harq_pid]->TBS));
+
         if (LOG_DEBUGFLAG(DEBUG_UE_PHYPROC)) {
           LOG_USEDINLOG_VAR(int8_t,harq_pid) = subframe2harq_pid(&ue->frame_parms,
                                                pdcch_alloc2ul_frame(&ue->frame_parms,proc->frame_rx,proc->subframe_rx),
@@ -4205,72 +4155,72 @@ int phy_procedures_slot_parallelization_UE_RX(PHY_VARS_UE *ue,UE_rxtx_proc_t *pr
   }
 
   if (LOG_DEBUGFLAG(UE_TIMING)) {
-      stop_meas(&ue->dlsch_procedures_stat[ue->current_thread_id[subframe_rx]]);
+    stop_meas(&ue->dlsch_procedures_stat[ue->current_thread_id[subframe_rx]]);
-      LOG_I(PHY, "[AbsSFN %d.%d] Channel Decoder: %5.2f \n",frame_rx,subframe_rx,ue->dlsch_procedures_stat[ue->current_thread_id[subframe_rx]].p_time/(cpuf*1000.0));
+    LOG_I(PHY, "[AbsSFN %d.%d] Channel Decoder: %5.2f \n",frame_rx,subframe_rx,ue->dlsch_procedures_stat[ue->current_thread_id[subframe_rx]].p_time/(cpuf*1000.0));
-}
+  }
 
-// duplicate harq structure
+  // duplicate harq structure
-uint8_t          current_harq_pid        = ue->dlsch[ue->current_thread_id[subframe_rx]][eNB_id][0]->current_harq_pid;
+  uint8_t          current_harq_pid        = ue->dlsch[ue->current_thread_id[subframe_rx]][eNB_id][0]->current_harq_pid;
-LTE_DL_UE_HARQ_t *current_harq_processes = ue->dlsch[ue->current_thread_id[subframe_rx]][eNB_id][0]->harq_processes[current_harq_pid];
+  LTE_DL_UE_HARQ_t *current_harq_processes = ue->dlsch[ue->current_thread_id[subframe_rx]][eNB_id][0]->harq_processes[current_harq_pid];
-harq_status_t    *current_harq_ack       = &ue->dlsch[ue->current_thread_id[subframe_rx]][eNB_id][0]->harq_ack[subframe_rx];
+  harq_status_t    *current_harq_ack       = &ue->dlsch[ue->current_thread_id[subframe_rx]][eNB_id][0]->harq_ack[subframe_rx];
+
+  // For Debug parallelisation
+  //if (current_harq_ack->ack == 0) {
+  //printf("[slot0 dl processing][End of Channel Decoding] AbsSubframe %d.%d Decode Fail for HarqId%d Round%d\n",frame_rx,subframe_rx,current_harq_pid,current_harq_processes->round);
+  //}
+  for(uint8_t rx_th_idx=1; rx_th_idx<RX_NB_TH; rx_th_idx++) {
+    LTE_DL_UE_HARQ_t *harq_processes_dest  = ue->dlsch[ue->current_thread_id[(subframe_rx+rx_th_idx)%10]][eNB_id][0]->harq_processes[current_harq_pid];
+    harq_status_t    *harq_ack_dest        = &ue->dlsch[ue->current_thread_id[(subframe_rx+rx_th_idx)%10]][eNB_id][0]->harq_ack[subframe_rx];
+    copy_harq_proc_struct(harq_processes_dest, current_harq_processes);
+    copy_ack_struct(harq_ack_dest, current_harq_ack);
+  }
+
+  /*
+  LTE_DL_UE_HARQ_t *harq_processes_dest    = ue->dlsch[(subframe_rx+1)%RX_NB_TH][eNB_id][0]->harq_processes[current_harq_pid];
+  LTE_DL_UE_HARQ_t *harq_processes_dest1    = ue->dlsch[(subframe_rx+2)%RX_NB_TH][eNB_id][0]->harq_processes[current_harq_pid];
+
+  harq_status_t *current_harq_ack = &ue->dlsch[subframe_rx%RX_NB_TH][eNB_id][0]->harq_ack[subframe_rx];
+  harq_status_t *harq_ack_dest    = &ue->dlsch[(subframe_rx+1)%RX_NB_TH][eNB_id][0]->harq_ack[subframe_rx];
+  harq_status_t *harq_ack_dest1    = &ue->dlsch[(subframe_rx+2)%RX_NB_TH][eNB_id][0]->harq_ack[subframe_rx];
 
-// For Debug parallelisation
-//if (current_harq_ack->ack == 0) {
-//printf("[slot0 dl processing][End of Channel Decoding] AbsSubframe %d.%d Decode Fail for HarqId%d Round%d\n",frame_rx,subframe_rx,current_harq_pid,current_harq_processes->round);
-//}
-for(uint8_t rx_th_idx=1; rx_th_idx<RX_NB_TH; rx_th_idx++) {
-  LTE_DL_UE_HARQ_t *harq_processes_dest  = ue->dlsch[ue->current_thread_id[(subframe_rx+rx_th_idx)%10]][eNB_id][0]->harq_processes[current_harq_pid];
-  harq_status_t    *harq_ack_dest        = &ue->dlsch[ue->current_thread_id[(subframe_rx+rx_th_idx)%10]][eNB_id][0]->harq_ack[subframe_rx];
   copy_harq_proc_struct(harq_processes_dest, current_harq_processes);
   copy_ack_struct(harq_ack_dest, current_harq_ack);
-}
 
-/*
+  copy_harq_proc_struct(harq_processes_dest1, current_harq_processes);
-LTE_DL_UE_HARQ_t *harq_processes_dest    = ue->dlsch[(subframe_rx+1)%RX_NB_TH][eNB_id][0]->harq_processes[current_harq_pid];
+  copy_ack_struct(harq_ack_dest1, current_harq_ack);
-LTE_DL_UE_HARQ_t *harq_processes_dest1    = ue->dlsch[(subframe_rx+2)%RX_NB_TH][eNB_id][0]->harq_processes[current_harq_pid];
+  */
+  if (subframe_rx==9) {
+    if (frame_rx % 10 == 0) {
+      if ((ue->dlsch_received[eNB_id] - ue->dlsch_received_last[eNB_id]) != 0)
+        ue->dlsch_fer[eNB_id] = (100*(ue->dlsch_errors[eNB_id] - ue->dlsch_errors_last[eNB_id]))/(ue->dlsch_received[eNB_id] - ue->dlsch_received_last[eNB_id]);
 
-harq_status_t *current_harq_ack = &ue->dlsch[subframe_rx%RX_NB_TH][eNB_id][0]->harq_ack[subframe_rx];
+      ue->dlsch_errors_last[eNB_id] = ue->dlsch_errors[eNB_id];
-harq_status_t *harq_ack_dest    = &ue->dlsch[(subframe_rx+1)%RX_NB_TH][eNB_id][0]->harq_ack[subframe_rx];
+      ue->dlsch_received_last[eNB_id] = ue->dlsch_received[eNB_id];
-harq_status_t *harq_ack_dest1    = &ue->dlsch[(subframe_rx+2)%RX_NB_TH][eNB_id][0]->harq_ack[subframe_rx];
+    }
 
-copy_harq_proc_struct(harq_processes_dest, current_harq_processes);
+    ue->bitrate[eNB_id] = (ue->total_TBS[eNB_id] - ue->total_TBS_last[eNB_id])*100;
-copy_ack_struct(harq_ack_dest, current_harq_ack);
+    ue->total_TBS_last[eNB_id] = ue->total_TBS[eNB_id];
-
+    LOG_D(PHY,"[UE %d] Calculating bitrate Frame %d: total_TBS = %d, total_TBS_last = %d, bitrate %f kbits\n",
-copy_harq_proc_struct(harq_processes_dest1, current_harq_processes);
+          ue->Mod_id,frame_rx,ue->total_TBS[eNB_id],
-copy_ack_struct(harq_ack_dest1, current_harq_ack);
+          ue->total_TBS_last[eNB_id],(float) ue->bitrate[eNB_id]/1000.0);
-*/
-if (subframe_rx==9) {
-  if (frame_rx % 10 == 0) {
-    if ((ue->dlsch_received[eNB_id] - ue->dlsch_received_last[eNB_id]) != 0)
-      ue->dlsch_fer[eNB_id] = (100*(ue->dlsch_errors[eNB_id] - ue->dlsch_errors_last[eNB_id]))/(ue->dlsch_received[eNB_id] - ue->dlsch_received_last[eNB_id]);
-
-    ue->dlsch_errors_last[eNB_id] = ue->dlsch_errors[eNB_id];
-    ue->dlsch_received_last[eNB_id] = ue->dlsch_received[eNB_id];
-  }
-
-  ue->bitrate[eNB_id] = (ue->total_TBS[eNB_id] - ue->total_TBS_last[eNB_id])*100;
-  ue->total_TBS_last[eNB_id] = ue->total_TBS[eNB_id];
-  LOG_D(PHY,"[UE %d] Calculating bitrate Frame %d: total_TBS = %d, total_TBS_last = %d, bitrate %f kbits\n",
-        ue->Mod_id,frame_rx,ue->total_TBS[eNB_id],
-        ue->total_TBS_last[eNB_id],(float) ue->bitrate[eNB_id]/1000.0);
 #if UE_AUTOTEST_TRACE
 
-  if ((frame_rx % 100 == 0)) {
+    if ((frame_rx % 100 == 0)) {
-    LOG_I(PHY,"[UE  %d] AUTOTEST Metric : UE_DLSCH_BITRATE = %5.2f kbps (frame = %d) \n", ue->Mod_id, (float) ue->bitrate[eNB_id]/1000.0, frame_rx);
+      LOG_I(PHY,"[UE  %d] AUTOTEST Metric : UE_DLSCH_BITRATE = %5.2f kbps (frame = %d) \n", ue->Mod_id, (float) ue->bitrate[eNB_id]/1000.0, frame_rx);
-  }
+    }
 
 #endif
-}
+  }
 
-VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_PROCEDURES_UE_RX, VCD_FUNCTION_OUT);
+  VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_PROCEDURES_UE_RX, VCD_FUNCTION_OUT);
 
-if (LOG_DEBUGFLAG(UE_TIMING)) {
+  if (LOG_DEBUGFLAG(UE_TIMING)) {
-  stop_meas(&ue->phy_proc_rx[ue->current_thread_id[subframe_rx]]);
+    stop_meas(&ue->phy_proc_rx[ue->current_thread_id[subframe_rx]]);
-  LOG_I(PHY, "------FULL RX PROC [AbsSFN %d.%d]: %5.2f ------\n",frame_rx,subframe_rx,ue->phy_proc_rx[ue->current_thread_id[subframe_rx]].p_time/(cpuf*1000.0));
+    LOG_I(PHY, "------FULL RX PROC [AbsSFN %d.%d]: %5.2f ------\n",frame_rx,subframe_rx,ue->phy_proc_rx[ue->current_thread_id[subframe_rx]].p_time/(cpuf*1000.0));
-}
+  }
 
-LOG_D(PHY," ****** end RX-Chain  for AbsSubframe %d.%d ******  \n", frame_rx%1024, subframe_rx);
+  LOG_D(PHY," ****** end RX-Chain  for AbsSubframe %d.%d ******  \n", frame_rx%1024, subframe_rx);
-return (0);
+  return (0);
 }
 #endif /*UE_SLOT_PARALLELISATION */
 

openair2/ENB_APP/flexran_agent_common.c

@@ -127,7 +127,6 @@ int flexran_agent_hello(mid_t mod_id, const void *params, Protocol__FlexranMessa
   hello_msg->bs_id  = flexran_get_bs_id(mod_id);
   hello_msg->has_bs_id = 1;
   hello_msg->n_capabilities = flexran_get_capabilities(mod_id, &hello_msg->capabilities);
-
   *msg = malloc(sizeof(Protocol__FlexranMessage));
 
   if(*msg == NULL)
@@ -296,8 +295,10 @@ int flexran_agent_destroy_enb_config_reply(Protocol__FlexranMessage *msg) {
   for (int i = 0; i < reply->n_cell_config; i++) {
     if (reply->cell_config[i]->mbsfn_subframe_config_rfoffset)
       free(reply->cell_config[i]->mbsfn_subframe_config_rfoffset);
+
     if (reply->cell_config[i]->mbsfn_subframe_config_rfperiod)
       free(reply->cell_config[i]->mbsfn_subframe_config_rfperiod);
+
     if (reply->cell_config[i]->mbsfn_subframe_config_sfalloc)
       free(reply->cell_config[i]->mbsfn_subframe_config_sfalloc);
 
@@ -305,6 +306,7 @@ int flexran_agent_destroy_enb_config_reply(Protocol__FlexranMessage *msg) {
       for(int j = 0; j < reply->cell_config[i]->si_config->n_si_message; j++) {
         free(reply->cell_config[i]->si_config->si_message[j]);
       }
+
       free(reply->cell_config[i]->si_config->si_message);
       free(reply->cell_config[i]->si_config);
     }
@@ -319,6 +321,7 @@ int flexran_agent_destroy_enb_config_reply(Protocol__FlexranMessage *msg) {
       }
 
       free(reply->cell_config[i]->slice_config->dl);
+
       for (int j = 0; j < reply->cell_config[i]->slice_config->n_ul; ++j) {
         if (reply->cell_config[i]->slice_config->ul[j]->n_sorting > 0)
           free(reply->cell_config[i]->slice_config->ul[j]->sorting);
@@ -492,16 +495,15 @@ int flexran_agent_lc_config_reply(mid_t mod_id, const void *params, Protocol__Fl
     goto error;
 
   lc_config_reply_msg->header = header;
-
   /* the lc_config_reply entirely depends on MAC except for the
    * mac_eNB_get_rrc_status() function (which in the current OAI implementation
    * is reachable if F1 is present). Therefore we check here wether MAC CM is
    * present and the message gets properly filled if it is or remains empty if
    * not */
   lc_config_reply_msg->n_lc_ue_config =
-      flexran_agent_get_mac_xface(mod_id) ? flexran_get_mac_num_ues(mod_id) : 0;
+    flexran_agent_get_mac_xface(mod_id) ? flexran_get_mac_num_ues(mod_id) : 0;
-
   Protocol__FlexLcUeConfig **lc_ue_config = NULL;
+
   if (lc_config_reply_msg->n_lc_ue_config > 0) {
     lc_ue_config = malloc(sizeof(Protocol__FlexLcUeConfig *) * lc_config_reply_msg->n_lc_ue_config);
 
@@ -512,6 +514,7 @@ int flexran_agent_lc_config_reply(mid_t mod_id, const void *params, Protocol__Fl
     // Fill the config for each UE
     for (int i = 0; i < lc_config_reply_msg->n_lc_ue_config; i++) {
       lc_ue_config[i] = malloc(sizeof(Protocol__FlexLcUeConfig));
+
       if (!lc_ue_config[i]) goto error;
 
       protocol__flex_lc_ue_config__init(lc_ue_config[i]);
@@ -554,8 +557,7 @@ error:
  * ************************************
  */
 
-int sort_ue_config(const void *a, const void *b)
+int sort_ue_config(const void *a, const void *b) {
-{
   const Protocol__FlexUeConfig *fa = a;
   const Protocol__FlexUeConfig *fb = b;
 
@@ -563,6 +565,7 @@ int sort_ue_config(const void *a, const void *b)
     return -1;
   else if (fa->rnti < fb->rnti)
     return 1;
+
   return 0;
 }
 
@@ -584,8 +587,8 @@ int flexran_agent_ue_config_reply(mid_t mod_id, const void *params, Protocol__Fl
     goto error;
 
   ue_config_reply_msg->header = header;
-
   ue_config_reply_msg->n_ue_config = 0;
+
   if (flexran_agent_get_rrc_xface(mod_id))
     ue_config_reply_msg->n_ue_config = flexran_get_rrc_num_ues(mod_id);
   else if (flexran_agent_get_mac_xface(mod_id))
@@ -597,7 +600,7 @@ int flexran_agent_ue_config_reply(mid_t mod_id, const void *params, Protocol__Fl
     const int nmac = flexran_get_mac_num_ues(mod_id);
     ue_config_reply_msg->n_ue_config = nrrc < nmac ? nrrc : nmac;
     LOG_E(FLEXRAN_AGENT, "%s(): different numbers of UEs in RRC (%d) and MAC (%d), reporting for %lu UEs\n",
-        __func__, nrrc, nmac, ue_config_reply_msg->n_ue_config);
+          __func__, nrrc, nmac, ue_config_reply_msg->n_ue_config);
   }
 
   Protocol__FlexUeConfig **ue_config;
@@ -608,8 +611,10 @@ int flexran_agent_ue_config_reply(mid_t mod_id, const void *params, Protocol__Fl
     if (ue_config == NULL) {
       goto error;
     }
+
     rnti_t rntis[ue_config_reply_msg->n_ue_config];
     flexran_get_rrc_rnti_list(mod_id, rntis, ue_config_reply_msg->n_ue_config);
+
     for (int i = 0; i < ue_config_reply_msg->n_ue_config; i++) {
       const rnti_t rnti = rntis[i];
       ue_config[i] = malloc(sizeof(Protocol__FlexUeConfig));
@@ -617,11 +622,13 @@ int flexran_agent_ue_config_reply(mid_t mod_id, const void *params, Protocol__Fl
 
       if (flexran_agent_get_rrc_xface(mod_id))
         flexran_agent_fill_rrc_ue_config(mod_id, rnti, ue_config[i]);
+
       if (flexran_agent_get_mac_xface(mod_id)) {
         const int UE_id = flexran_get_mac_ue_id_rnti(mod_id, rnti);
         flexran_agent_fill_mac_ue_config(mod_id, UE_id, ue_config[i]);
       }
     }
+
     ue_config_reply_msg->ue_config = ue_config;
   }
 
@@ -725,14 +732,20 @@ int flexran_agent_enb_config_reply(mid_t mod_id, const void *params, Protocol__F
 
     if(cell_conf == NULL)
       goto error;
-    for(int i = 0; i < enb_config_reply_msg->n_cell_config; i++){
+
+    for(int i = 0; i < enb_config_reply_msg->n_cell_config; i++) {
       cell_conf[i] = malloc(sizeof(Protocol__FlexCellConfig));
+
       if (!cell_conf[i]) goto error;
+
       protocol__flex_cell_config__init(cell_conf[i]);
+
       if (flexran_agent_get_phy_xface(mod_id))
         flexran_agent_fill_phy_cell_config(mod_id, i, cell_conf[i]);
+
       if (flexran_agent_get_rrc_xface(mod_id))
         flexran_agent_fill_rrc_cell_config(mod_id, i, cell_conf[i]);
+
       if (flexran_agent_get_mac_xface(mod_id))
         flexran_agent_fill_mac_cell_config(mod_id, i, cell_conf[i]);
 
@@ -804,10 +817,11 @@ int flexran_agent_handle_enb_config_reply(mid_t mod_id, const void *params, Prot
 
   if (enb_config->n_cell_config > 1)
     LOG_W(FLEXRAN_AGENT, "ignoring slice configs for other cell except cell 0\n");
+
   if (flexran_agent_get_mac_xface(mod_id) && enb_config->cell_config[0]->slice_config) {
     prepare_update_slice_config(mod_id, enb_config->cell_config[0]->slice_config);
-  //} else {
+    //} else {
-  //  initiate_soft_restart(mod_id, enb_config->cell_config[0]);
+    //  initiate_soft_restart(mod_id, enb_config->cell_config[0]);
   }
 
   *msg = NULL;

openair2/LAYER2/MAC/ue_procedures.c

@@ -3329,7 +3329,7 @@ SLDCH_t *ue_get_sldch(module_id_t Mod_id,int CC_id,frame_t frame_tx,sub_frame_t
 
 
 SLSCH_t *ue_get_slsch(module_id_t module_idP,int CC_id,frame_t frameP,sub_frame_t subframeP) {
-  mac_rlc_status_resp_t rlc_status; //, rlc_status_data;
+  mac_rlc_status_resp_t rlc_status = {0,0,0,0,0}; //, rlc_status_data;
   uint32_t absSF = (frameP*10)+subframeP;
   UE_MAC_INST *ue = &UE_mac_inst[module_idP];
   int rvtab[4] = {0,2,3,1};
@@ -3370,10 +3370,7 @@ SLSCH_t *ue_get_slsch(module_id_t module_idP,int CC_id,frame_t frameP,sub_frame_
            (ue->sltx_active == 1)) { // every 4th subframe, check for new data from RLC
     // 10 PRBs, mcs 19
     int TBS = 4584/8;
-    int req;
+    int req = (TBS <= rlc_status.bytes_in_buffer) ? TBS : rlc_status.bytes_in_buffer;
-
-    if (TBS <= rlc_status.bytes_in_buffer) req = TBS;
-    else req = rlc_status.bytes_in_buffer;
 
     if (req>0) {
       sdu_length = mac_rlc_data_req(module_idP,

targets/RT/USER/lte-softmodem-common.c

@@ -60,6 +60,7 @@ void get_common_options(void) {
   uint32_t nonbiot;
   uint32_t rfsim;
   uint32_t basicsim;
+  uint32_t do_forms;
   paramdef_t cmdline_params[] =CMDLINE_PARAMS_DESC ;
   paramdef_t cmdline_logparams[] =CMDLINE_LOGPARAMS_DESC ;
   checkedparam_t cmdline_log_CheckParams[] = CMDLINE_LOGPARAMS_CHECK_DESC;
@@ -100,6 +101,10 @@ void get_common_options(void) {
     set_softmodem_optmask(SOFTMODEM_BASICSIM_BIT);
   }
 
+  if (do_forms) {
+    set_softmodem_optmask(SOFTMODEM_DOFORMS_BIT);
+  }
+
 #if BASIC_SIMULATOR
   set_softmodem_optmask(SOFTMODEM_BASICSIM_BIT);
 #endif

targets/RT/USER/lte-softmodem.c

@@ -64,6 +64,7 @@
 #include "LAYER2/MAC/mac_proto.h"
 #include "RRC/LTE/rrc_vars.h"
 #include "PHY_INTERFACE/phy_interface_vars.h"
+#include "PHY/TOOLS/phy_scope_interface.h"
 #include "nfapi/oai_integration/vendor_ext.h"
 #ifdef SMBV
 #include "PHY/TOOLS/smbv.h"
@@ -90,22 +91,9 @@ unsigned short config_frames[4] = {2,9,11,13};
 
 #include "system.h"
 
-#ifdef XFORMS
+
-  #include "PHY/TOOLS/lte_phy_scope.h"
-  #include "stats.h"
-#endif
 #include "lte-softmodem.h"
 #include "NB_IoT_interface.h"
-#ifdef XFORMS
-  // current status is that every UE has a DL scope for a SINGLE eNB (eNB_id=0)
-  // at eNB 0, an UL scope for every UE
-  FD_lte_phy_scope_ue  *form_ue[NUMBER_OF_UE_MAX];
-  FD_lte_phy_scope_enb *form_enb[MAX_NUM_CCs][NUMBER_OF_UE_MAX];
-  FD_stats_form                  *form_stats=NULL,*form_stats_l2=NULL;
-  char title[255];
-  unsigned char                   scope_enb_num_ue = 2;
-  static pthread_t                forms_thread; //xforms
-#endif //XFORMS
 
 
 pthread_cond_t nfapi_sync_cond;
@@ -163,12 +151,8 @@ char channels[128] = "0";
 
 int                      rx_input_level_dBm;
 
-#ifdef XFORMS
+
-  extern int                      otg_enabled;
+int                             otg_enabled;
-#else
-  int                             otg_enabled;
-#endif
-//int                             number_of_cards =   1;
 
 
 uint8_t exit_missed_slots=1;
@@ -301,75 +285,6 @@ void exit_function(const char *file, const char *function, const int line, const
   exit(1);
 }
 
-#ifdef XFORMS
-
-
-void reset_stats(FL_OBJECT *button, long arg) {
-  int i,j,k;
-  PHY_VARS_eNB *phy_vars_eNB = RC.eNB[0][0];
-
-  for (i=0; i<NUMBER_OF_UE_MAX; i++) {
-    for (k=0; k<8; k++) { //harq_processes
-      for (j=0; j<phy_vars_eNB->dlsch[i][0]->Mlimit; j++) {
-        phy_vars_eNB->UE_stats[i].dlsch_NAK[k][j]=0;
-        phy_vars_eNB->UE_stats[i].dlsch_ACK[k][j]=0;
-        phy_vars_eNB->UE_stats[i].dlsch_trials[k][j]=0;
-      }
-
-      phy_vars_eNB->UE_stats[i].dlsch_l2_errors[k]=0;
-      phy_vars_eNB->UE_stats[i].ulsch_errors[k]=0;
-      phy_vars_eNB->UE_stats[i].ulsch_consecutive_errors=0;
-      phy_vars_eNB->UE_stats[i].dlsch_sliding_cnt=0;
-      phy_vars_eNB->UE_stats[i].dlsch_NAK_round0=0;
-      phy_vars_eNB->UE_stats[i].dlsch_mcs_offset=0;
-    }
-  }
-}
-
-static void *scope_thread(void *arg) {
-# ifdef ENABLE_XFORMS_WRITE_STATS
-  FILE *eNB_stats;
-# endif
-  struct sched_param sched_param;
-  int UE_id, CC_id;
-  int ue_cnt=0;
-  sched_param.sched_priority = sched_get_priority_min(SCHED_FIFO)+1;
-  sched_setscheduler(0, SCHED_FIFO,&sched_param);
-  printf("Scope thread has priority %d\n",sched_param.sched_priority);
-# ifdef ENABLE_XFORMS_WRITE_STATS
-  eNB_stats = fopen("eNB_stats.txt", "w");
-#endif
-
-  while (!oai_exit) {
-    ue_cnt=0;
-
-    for(UE_id=0; UE_id<NUMBER_OF_UE_MAX; UE_id++) {
-      for(CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
-        if ((ue_cnt<scope_enb_num_ue)) {
-          phy_scope_eNB(form_enb[CC_id][ue_cnt],
-                        RC.eNB[0][CC_id],
-                        UE_id);
-          ue_cnt++;
-        }
-      }
-    }
-
-    sleep(1);
-  }
-
-  //  printf("%s",stats_buffer);
-# ifdef ENABLE_XFORMS_WRITE_STATS
-
-  if (eNB_stats) {
-    rewind (eNB_stats);
-    fwrite (stats_buffer, 1, len, eNB_stats);
-    fclose (eNB_stats);
-  }
-
-# endif
-  pthread_exit((void *)arg);
-}
-#endif
 
 
 static void get_options(void) {
@@ -579,9 +494,11 @@ void init_pdcp(void) {
   if (!NODE_IS_DU(RC.rrc[0]->node_type)) {
     pdcp_layer_init();
     uint32_t pdcp_initmask = (IS_SOFTMODEM_NOS1) ?
-        (PDCP_USE_NETLINK_BIT | LINK_ENB_PDCP_TO_IP_DRIVER_BIT) : LINK_ENB_PDCP_TO_GTPV1U_BIT;
+                             (PDCP_USE_NETLINK_BIT | LINK_ENB_PDCP_TO_IP_DRIVER_BIT) : LINK_ENB_PDCP_TO_GTPV1U_BIT;
+
     if (IS_SOFTMODEM_NOS1)
       pdcp_initmask = pdcp_initmask | ENB_NAS_USE_TUN_BIT | SOFTMODEM_NOKRNMOD_BIT  ;
+
     pdcp_module_init(pdcp_initmask);
 
     if (NODE_IS_CU(RC.rrc[0]->node_type)) {
@@ -608,14 +525,8 @@ static  void wait_nfapi_init(char *thread_name) {
 
 int main( int argc, char **argv ) {
   int i;
-#if defined (XFORMS)
-  void *status;
-#endif
   int CC_id = 0;
   int ru_id;
-#if defined (XFORMS)
-  int ret;
-#endif
 
   if ( load_configmodule(argc,argv,0) == NULL) {
     exit_fun("[SOFTMODEM] Error, configuration module init failed\n");
@@ -675,9 +586,9 @@ int main( int argc, char **argv ) {
   /* Read configuration */
   if (RC.nb_inst > 0) {
     read_config_and_init();
-
     /* Start the agent. If it is turned off in the configuration, it won't start */
     RCconfig_flexran();
+
     for (i = 0; i < RC.nb_inst; i++) {
       flexran_agent_start(i);
     }
@@ -718,42 +629,9 @@ int main( int argc, char **argv ) {
     mlockall(MCL_CURRENT | MCL_FUTURE);
     pthread_cond_init(&sync_cond,NULL);
     pthread_mutex_init(&sync_mutex, NULL);
-#ifdef XFORMS
-    int UE_id;
-    printf("XFORMS\n");
 
-    if (get_softmodem_params()->do_forms==1) {
-      fl_initialize (&argc, argv, NULL, 0, 0);
-      form_stats_l2 = create_form_stats_form();
-      fl_show_form (form_stats_l2->stats_form, FL_PLACE_HOTSPOT, FL_FULLBORDER, "l2 stats");
-      form_stats = create_form_stats_form();
-      fl_show_form (form_stats->stats_form, FL_PLACE_HOTSPOT, FL_FULLBORDER, "stats");
 
-      for(UE_id=0; UE_id<scope_enb_num_ue; UE_id++) {
-        for(CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
-          form_enb[CC_id][UE_id] = create_lte_phy_scope_enb();
-          sprintf (title, "LTE UL SCOPE eNB for CC_id %d, UE %d",CC_id,UE_id);
-          fl_show_form (form_enb[CC_id][UE_id]->lte_phy_scope_enb, FL_PLACE_HOTSPOT, FL_FULLBORDER, title);
 
-          if (otg_enabled) {
-            fl_set_button(form_enb[CC_id][UE_id]->button_0,1);
-            fl_set_object_label(form_enb[CC_id][UE_id]->button_0,"DL Traffic ON");
-          } else {
-            fl_set_button(form_enb[CC_id][UE_id]->button_0,0);
-            fl_set_object_label(form_enb[CC_id][UE_id]->button_0,"DL Traffic OFF");
-          }
-        } // CC_id
-      } // UE_id
-
-      ret = pthread_create(&forms_thread, NULL, scope_thread, NULL);
-
-      if (ret == 0)
-        pthread_setname_np( forms_thread, "xforms" );
-
-      printf("Scope thread created, ret=%d\n",ret);
-    }
-
-#endif
     rt_sleep_ns(10*100000000ULL);
 
     if (NFAPI_MODE!=NFAPI_MONOLITHIC) {
@@ -839,32 +717,17 @@ int main( int argc, char **argv ) {
   fflush(stderr);
   // end of CI modifications
   //getchar();
+  if(IS_SOFTMODEM_DOFORMS)
+     load_softscope("enb");
   itti_wait_tasks_end();
   oai_exit=1;
   LOG_I(ENB_APP,"oai_exit=%d\n",oai_exit);
   // stop threads
 
   if (RC.nb_inst == 0 || !NODE_IS_CU(RC.rrc[0]->node_type)) {
-    int UE_id;
+    if(IS_SOFTMODEM_DOFORMS)
-#ifdef XFORMS
+      end_forms();
-    printf("waiting for XFORMS thread\n");
 
-    if (get_softmodem_params()->do_forms==1) {
-      pthread_join(forms_thread,&status);
-      fl_hide_form(form_stats->stats_form);
-      fl_free_form(form_stats->stats_form);
-      fl_hide_form(form_stats_l2->stats_form);
-      fl_free_form(form_stats_l2->stats_form);
-
-      for(UE_id=0; UE_id<scope_enb_num_ue; UE_id++) {
-        for(CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
-          fl_hide_form(form_enb[CC_id][UE_id]->lte_phy_scope_enb);
-          fl_free_form(form_enb[CC_id][UE_id]->lte_phy_scope_enb);
-        }
-      }
-    }
-
-#endif
     LOG_I(ENB_APP,"stopping MODEM threads\n");
     stop_eNB(NB_eNB_INST);
     stop_RU(RC.nb_RU);

targets/RT/USER/lte-softmodem.h

@@ -179,7 +179,6 @@
 #define WAIT_FOR_SYNC       softmodem_params.wait_for_sync
 #define SINGLE_THREAD_FLAG  softmodem_params.single_thread_flag
 #define CHAIN_OFFSET        softmodem_params.chain_offset
-#define DO_FORMS            softmodem_params.do_forms
 #define NUMEROLOGY          softmodem_params.numerology
 #define EMULATE_RF          softmodem_params.emulate_rf
 #define CLOCK_SOURCE        softmodem_params.clock_source
@@ -195,7 +194,7 @@
     {"single-thread-enable",    CONFIG_HLP_NOSNGLT,     PARAMFLAG_BOOL,         iptr:&SINGLE_THREAD_FLAG,           defintval:0,                    TYPE_INT,       0},                     \
     {"C" ,                      CONFIG_HLP_DLF,         0,                      uptr:&(downlink_frequency[0][0]),   defuintval:2680000000,          TYPE_UINT,      0},                     \
     {"a" ,                      CONFIG_HLP_CHOFF,       0,                      iptr:&CHAIN_OFFSET,                 defintval:0,                    TYPE_INT,       0},                     \
-    {"d" ,                      CONFIG_HLP_SOFTS,       PARAMFLAG_BOOL,         uptr:(uint32_t *)&DO_FORMS,         defintval:0,                    TYPE_INT8,      0},                     \
+    {"d" ,                      CONFIG_HLP_SOFTS,       PARAMFLAG_BOOL,         uptr:(uint32_t *)&do_forms,         defintval:0,                    TYPE_INT8,      0},                     \
     {"q" ,                      CONFIG_HLP_STMON,       PARAMFLAG_BOOL,         iptr:&opp_enabled,                  defintval:0,                    TYPE_INT,       0},                     \
     {"S" ,                      CONFIG_HLP_MSLOTS,      PARAMFLAG_BOOL,         u8ptr:&exit_missed_slots,           defintval:1,                    TYPE_UINT8,     0},                     \
     {"numerology" ,             CONFIG_HLP_NUMEROLOGY,  PARAMFLAG_BOOL,         iptr:&NUMEROLOGY,                   defintval:0,                    TYPE_INT,       0},                     \
@@ -245,6 +244,7 @@
 #define SOFTMODEM_RFSIM_BIT           (1<<10)
 #define SOFTMODEM_BASICSIM_BIT        (1<<11)
 #define SOFTMODEM_SIML1_BIT           (1<<12)
+#define SOFTMODEM_DOFORMS_BIT         (1<<15)
 typedef struct {
   uint64_t       optmask;
   THREAD_STRUCT  thread_struct;
@@ -255,7 +255,6 @@ typedef struct {
   int            wait_for_sync; //eNodeB only
   int            single_thread_flag; //eNodeB only
   int            chain_offset;
-  uint32_t       do_forms;
   int            numerology;
   unsigned int   start_msc;
   uint32_t       clock_source;
@@ -268,6 +267,7 @@ typedef struct {
 #define IS_SOFTMODEM_RFSIM           ( get_softmodem_optmask() & SOFTMODEM_RFSIM_BIT)
 #define IS_SOFTMODEM_BASICSIM        ( get_softmodem_optmask() & SOFTMODEM_BASICSIM_BIT)
 #define IS_SOFTMODEM_SIML1           ( get_softmodem_optmask() & SOFTMODEM_SIML1_BIT)
+#define IS_SOFTMODEM_DOFORMS         ( get_softmodem_optmask() & SOFTMODEM_DOFORMS_BIT)
 extern uint64_t get_softmodem_optmask(void);
 extern uint64_t set_softmodem_optmask(uint64_t bitmask);
 extern void get_common_options(void);

targets/RT/USER/lte-ue.c

@@ -1741,7 +1741,7 @@ void *UE_thread(void *arg) {
             }
           }
 
-          //usleep(3000);
+          //          usleep(3000);
           if(sub_frame == 0) {
             //UE->proc.proc_rxtx[0].frame_rx++;
             //UE->proc.proc_rxtx[1].frame_rx++;

targets/RT/USER/lte-uesoftmodem.c

@@ -66,7 +66,7 @@
 #include "LAYER2/MAC/mac_proto.h"
 #include "RRC/LTE/rrc_vars.h"
 #include "PHY_INTERFACE/phy_interface_vars.h"
-
+#include "PHY/TOOLS/phy_scope_interface.h"
 #include "common/utils/LOG/log.h"
 #include "nfapi/oai_integration/vendor_ext.h"
 #include "UTIL/OTG/otg_tx.h"
@@ -85,26 +85,14 @@
 
 #include "system.h"
 
-#ifdef XFORMS
+
-  #include "PHY/TOOLS/lte_phy_scope.h"
-  #include "stats.h"
-#endif
 #include "lte-softmodem.h"
 
 
 
 /* temporary compilation wokaround (UE/eNB split */
 uint16_t sf_ahead;
-#ifdef XFORMS
+
-  // current status is that every UE has a DL scope for a SINGLE eNB (eNB_id=0)
-  // at eNB 0, an UL scope for every UE
-  FD_lte_phy_scope_ue  *form_ue[NUMBER_OF_UE_MAX];
-  FD_lte_phy_scope_enb *form_enb[MAX_NUM_CCs][NUMBER_OF_UE_MAX];
-  FD_stats_form                  *form_stats=NULL,*form_stats_l2=NULL;
-  char title[255];
-  unsigned char                   scope_enb_num_ue = 2;
-  static pthread_t                forms_thread; //xforms
-#endif //XFORMS
 
 pthread_cond_t nfapi_sync_cond;
 pthread_mutex_t nfapi_sync_mutex;
@@ -148,7 +136,7 @@ int snr_dB=25;
 runmode_t mode = normal_txrx;
 
 FILE *input_fd=NULL;
-
+int otg_enabled=0;
 
 #if MAX_NUM_CCs == 1
 rx_gain_t                rx_gain_mode[MAX_NUM_CCs][4] = {{max_gain,max_gain,max_gain,max_gain}};
@@ -179,10 +167,6 @@ char channels[128] = "0";
 
 int                      rx_input_level_dBm;
 
-#ifdef XFORMS
-  extern int                      otg_enabled;
-#endif
-//int                             number_of_cards =   1;
 
 
 static LTE_DL_FRAME_PARMS      *frame_parms[MAX_NUM_CCs];
@@ -329,68 +313,8 @@ void exit_function(const char *file, const char *function, const int line, const
   exit(1);
 }
 
-#ifdef XFORMS
 
 
-void reset_stats(FL_OBJECT *button, long arg) {
-  int i,j,k;
-  PHY_VARS_eNB *phy_vars_eNB = RC.eNB[0][0];
-
-  for (i=0; i<NUMBER_OF_UE_MAX; i++) {
-    for (k=0; k<8; k++) { //harq_processes
-      for (j=0; j<phy_vars_eNB->dlsch[i][0]->Mlimit; j++) {
-        phy_vars_eNB->UE_stats[i].dlsch_NAK[k][j]=0;
-        phy_vars_eNB->UE_stats[i].dlsch_ACK[k][j]=0;
-        phy_vars_eNB->UE_stats[i].dlsch_trials[k][j]=0;
-      }
-
-      phy_vars_eNB->UE_stats[i].dlsch_l2_errors[k]=0;
-      phy_vars_eNB->UE_stats[i].ulsch_errors[k]=0;
-      phy_vars_eNB->UE_stats[i].ulsch_consecutive_errors=0;
-      phy_vars_eNB->UE_stats[i].dlsch_sliding_cnt=0;
-      phy_vars_eNB->UE_stats[i].dlsch_NAK_round0=0;
-      phy_vars_eNB->UE_stats[i].dlsch_mcs_offset=0;
-    }
-  }
-}
-
-static void *scope_thread(void *arg) {
-  char stats_buffer[16384];
-# ifdef ENABLE_XFORMS_WRITE_STATS
-  FILE *UE_stats, *eNB_stats;
-# endif
-  struct sched_param sched_param;
-  sched_param.sched_priority = sched_get_priority_min(SCHED_FIFO)+1;
-  sched_setscheduler(0, SCHED_FIFO,&sched_param);
-  printf("Scope thread has priority %d\n",sched_param.sched_priority);
-# ifdef ENABLE_XFORMS_WRITE_STATS
-  UE_stats  = fopen("UE_stats.txt", "w");
-#endif
-
-  while (!oai_exit) {
-    //      dump_ue_stats (PHY_vars_UE_g[0][0], &PHY_vars_UE_g[0][0]->proc.proc_rxtx[0],stats_buffer, 0, mode,rx_input_level_dBm);
-    //fl_set_object_label(form_stats->stats_text, stats_buffer);
-    fl_clear_browser(form_stats->stats_text);
-    fl_add_browser_line(form_stats->stats_text, stats_buffer);
-    phy_scope_UE(form_ue[0],
-                 PHY_vars_UE_g[0][0],
-                 0,
-                 0,7);
-    //  printf("%s",stats_buffer);
-  }
-
-# ifdef ENABLE_XFORMS_WRITE_STATS
-
-  if (UE_stats) {
-    rewind (UE_stats);
-    fwrite (stats_buffer, 1, len, UE_stats);
-    fclose (UE_stats);
-  }
-
-# endif
-  pthread_exit((void *)arg);
-}
-#endif
 
 
 
@@ -675,9 +599,6 @@ void init_pdcp(void) {
 }
 
 int main( int argc, char **argv ) {
-#if defined (XFORMS)
-  void *status;
-#endif
   int CC_id;
   uint8_t  abstraction_flag=0;
 #ifdef UESIM_EXPANSION
@@ -687,9 +608,6 @@ int main( int argc, char **argv ) {
   // if not changed from the command line option --num-ues
   NB_UE_INST=1;
   NB_THREAD_INST=1;
-#if defined (XFORMS)
-  int ret;
-#endif
   configmodule_interface_t *config_mod;
   start_background_system();
   config_mod = load_configmodule(argc, argv, CONFIG_ENABLECMDLINEONLY);
@@ -749,9 +667,7 @@ int main( int argc, char **argv ) {
 
   MSC_INIT(MSC_E_UTRAN, THREAD_MAX+TASK_MAX);
   init_opt();
-
   init_pdcp();
-
   //TTN for D2D
   printf ("RRC control socket\n");
   rrc_control_socket_init();
@@ -898,37 +814,9 @@ int main( int argc, char **argv ) {
     PHY_vars_UE_g[0][0]->no_timing_correction = 1;
   }
 
-#ifdef XFORMS
+  if(IS_SOFTMODEM_DOFORMS)
-  int UE_id;
+    load_softscope("ue");
-  printf("XFORMS\n");
 
-  if (get_softmodem_params()->do_forms==1) {
-    fl_initialize (&argc, argv, NULL, 0, 0);
-    form_stats = create_form_stats_form();
-    fl_show_form (form_stats->stats_form, FL_PLACE_HOTSPOT, FL_FULLBORDER, "stats");
-    UE_id = 0;
-    form_ue[UE_id] = create_lte_phy_scope_ue();
-    sprintf (title, "LTE DL SCOPE UE");
-    fl_show_form (form_ue[UE_id]->lte_phy_scope_ue, FL_PLACE_HOTSPOT, FL_FULLBORDER, title);
-    /*
-    if (openair_daq_vars.use_ia_receiver) {
-    fl_set_button(form_ue[UE_id]->button_0,1);
-    fl_set_object_label(form_ue[UE_id]->button_0, "IA Receiver ON");
-    } else {
-    fl_set_button(form_ue[UE_id]->button_0,0);
-    fl_set_object_label(form_ue[UE_id]->button_0, "IA Receiver OFF");
-    }*/
-    fl_set_button(form_ue[UE_id]->button_0,0);
-    fl_set_object_label(form_ue[UE_id]->button_0, "IA Receiver OFF");
-    ret = pthread_create(&forms_thread, NULL, scope_thread, NULL);
-
-    if (ret == 0)
-      pthread_setname_np( forms_thread, "xforms" );
-
-    printf("Scope thread created, ret=%d\n",ret);
-  }
-
-#endif
   config_check_unknown_cmdlineopt(CONFIG_CHECKALLSECTIONS);
   printf("Sending sync to all threads (%p,%p,%p)\n",&sync_var,&sync_cond,&sync_mutex);
   pthread_mutex_lock(&sync_mutex);
@@ -957,19 +845,11 @@ int main( int argc, char **argv ) {
 
   printf("Terminating application - oai_exit=%d\n",oai_exit);
 #endif
+
   // stop threads
-#ifdef XFORMS
+  if(IS_SOFTMODEM_DOFORMS)
-  printf("waiting for XFORMS thread\n");
+    end_forms();
 
-  if (get_softmodem_params()->do_forms==1) {
-    pthread_join(forms_thread,&status);
-    fl_hide_form(form_stats->stats_form);
-    fl_free_form(form_stats->stats_form);
-    fl_hide_form(form_ue[0]->lte_phy_scope_ue);
-    fl_free_form(form_ue[0]->lte_phy_scope_ue);
-  }
-
-#endif
   printf("stopping MODEM threads\n");
   pthread_cond_destroy(&sync_cond);
   pthread_mutex_destroy(&sync_mutex);