maki/openairinterface5g
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Merge remote-tracking branch 'origin/remove-dead-code' into integration_2026_w05 (!3831)

Browse Source 
semi-manual remove of not used #define commands

As i was upset to see all these #define with no code under, i made a
global pass to remove the obvious cases semi-manual remove of not used
bodies

manual script, then a lot of manual review

    grep -IRs "#define" ../openair* ../common/* ../executables/ ../nfapi/ ../radio/ | \
        fgrep -v '(' | fgrep -v '//' |awk '{print $2}' | egrep -v "#define *$n"| \
            while read n ; do
              grep -IRs $n ../openair* ../common/* ../executables/ ../nfapi/ ../radio/  | grep -v "#define *$n" | grep -q $n || echo $n;
            done

will give a decent list of #define never used.  Then, I think we should
keep lists of # define when it comes from standards, even if the code
doesn't use it right now
This commit is contained in:
Robert Schmidt
2026-01-29 08:23:41 +01:00
parent 0eb33e69c7 f9e7e5199d
commit a0a68d56d5
172 changed files with 32 additions and 2467 deletions
Download Patch File Download Diff File Expand all files Collapse all files
executables/create_tasks.c
-4
View File
@@ -29,10 +29,6 @@
#include "x2ap_eNB.h"
#include "s1ap_eNB.h"
#include "openair3/ocp-gtpu/gtp_itf.h"
#if ENABLE_RAL
#include "lteRALue.h"
#include "lteRALenb.h"
#endif
#include "RRC/LTE/rrc_defs.h"
# include "enb_app.h"
# include "openair2/LAYER2/MAC/mac_proto.h"
executables/create_tasks_mbms.c
-4
View File
@@ -33,10 +33,6 @@
#include "m2ap_MCE.h"
#include "m3ap_MME.h"
#include "m3ap_MCE.h"
#if ENABLE_RAL
#include "lteRALue.h"
#include "lteRALenb.h"
#endif
#include "RRC/LTE/rrc_defs.h"
# include "enb_app.h"
# include "mce_app.h"
executables/create_tasks_ue.c
-4
View File
@@ -27,10 +27,6 @@
#include "sctp_eNB_task.h"
#include "s1ap_eNB.h"
#include "openair3/NAS/UE/nas_ue_task.h"
#if ENABLE_RAL
#include "lteRALue.h"
#include "lteRALenb.h"
#endif
#include "RRC/LTE/rrc_defs.h"
# include "enb_app.h"
executables/lte-enb.c
-7
View File
@@ -80,9 +80,6 @@
#include "common/ran_context.h"
extern RAN_CONTEXT_t RC;
//#define DEBUG_THREADS 1
//#define USRP_DEBUG 1
struct timing_info_t {
//unsigned int frame, hw_slot, last_slot, next_slot;
//unsigned int mbox0, mbox1, mbox2, mbox_target;
@@ -115,10 +112,6 @@ static struct {
volatile uint8_t phy_proc_CC_id;
} sync_phy_proc;
extern double cpuf;
void init_eNB();
void stop_eNB(int nb_inst);
int wakeup_tx(PHY_VARS_eNB *eNB, int frame_rx, int subframe_rx, int frame_tx, int subframe_tx, uint64_t timestamp_tx);
executables/lte-ru.c
-9
View File
@@ -1251,45 +1251,37 @@ void fill_rf_config(RU_t *ru,
if(ru->numerology == 0) {
if (fp->threequarter_fs) {
cfg->sample_rate=23.04e6;
cfg->samples_per_frame = 230400;
cfg->tx_bw = 20e6;
cfg->rx_bw = 20e6;
} else {
cfg->sample_rate=30.72e6;
cfg->samples_per_frame = 307200;
cfg->tx_bw = 20e6;
cfg->rx_bw = 20e6;
}
} else if(ru->numerology == 1) {
cfg->sample_rate=61.44e6;
cfg->samples_per_frame = 307200;
cfg->tx_bw = 20e6;
cfg->rx_bw = 20e6;
} else if(ru->numerology == 2) {
cfg->sample_rate=122.88e6;
cfg->samples_per_frame = 307200;
cfg->tx_bw = 40e6;
cfg->rx_bw = 40e6;
} else {
LOG_I(PHY,"Wrong input for numerology %d\n setting to 20MHz normal CP configuration",numerology);
cfg->sample_rate=30.72e6;
cfg->samples_per_frame = 307200;
cfg->tx_bw = 10e6;
cfg->rx_bw = 10e6;
}
} else if(fp->N_RB_DL == 50) {
cfg->sample_rate=15.36e6;
cfg->samples_per_frame = 153600;
cfg->tx_bw = 10e6;
cfg->rx_bw = 10e6;
} else if (fp->N_RB_DL == 25) {
cfg->sample_rate=7.68e6;
cfg->samples_per_frame = 76800;
cfg->tx_bw = 5e6;
cfg->rx_bw = 5e6;
} else if (fp->N_RB_DL == 6) {
cfg->sample_rate=1.92e6;
cfg->samples_per_frame = 19200;
cfg->tx_bw = 1.5e6;
cfg->rx_bw = 1.5e6;
} else AssertFatal(1==0,"Unknown N_RB_DL %d\n",fp->N_RB_DL);
@@ -1299,7 +1291,6 @@ void fill_rf_config(RU_t *ru,
else //FDD
cfg->duplex_mode = duplex_mode_FDD;
cfg->Mod_id = 0;
cfg->num_rb_dl=fp->N_RB_DL;
cfg->tx_num_channels=ru->nb_tx;
cfg->rx_num_channels=ru->nb_rx;
executables/lte-softmodem.h
+1 -5
View File
@@ -53,13 +53,10 @@
#define CMDLINE_DEBUGUEPRACH_IDX 3
#define CMDLINE_NOL2CONNECT_IDX 4
#define CMDLINE_CALIBPRACHTX_IDX 5
#define CMDLINE_MEMLOOP_IDX 6
#define CMDLINE_DUMPMEMORY_IDX 7
/*------------------------------------------------------------------------------------------------------------------------------------------*/
/* help strings definition for command line options, used in CMDLINE_XXX_DESC macros and printed when -h option is used */
#define CONFIG_HLP_SIML1 "activate RF simulator instead of HW\n"
#define CONFIG_HLP_NUMUE "number of UE instances\n"
#define CONFIG_HLP_UERXG "set UE RX gain\n"
#define CONFIG_HLP_UERXGOFF "external UE amplifier offset\n"
@@ -125,7 +122,6 @@ extern pthread_cond_t sync_cond;
extern pthread_mutex_t sync_mutex;
extern int sync_var;
extern int transmission_mode;
extern double cpuf;
extern int numerology;
extern int usrp_tx_thread;
executables/lte-ue.c
-4
View File
@@ -59,11 +59,7 @@
#include "common/config/config_userapi.h"
#include "T.h"
extern double cpuf;
#define FRAME_PERIOD 100000000ULL
#define DAQ_PERIOD 66667ULL
#define FIFO_PRIORITY 40
#define NB_THREAD_INST 1
typedef enum {
executables/lte-uesoftmodem.c
-6
View File
@@ -343,28 +343,23 @@ static void init_openair0(LTE_DL_FRAME_PARMS *frame_parms, int rxgain)
if(frame_parms->N_RB_DL == 100) {
if (frame_parms->threequarter_fs) {
openair0_cfg[card].sample_rate=23.04e6;
openair0_cfg[card].samples_per_frame = 230400;
openair0_cfg[card].tx_bw = 10e6;
openair0_cfg[card].rx_bw = 10e6;
} else {
openair0_cfg[card].sample_rate=30.72e6;
openair0_cfg[card].samples_per_frame = 307200;
openair0_cfg[card].tx_bw = 10e6;
openair0_cfg[card].rx_bw = 10e6;
}
} else if(frame_parms->N_RB_DL == 50) {
openair0_cfg[card].sample_rate=15.36e6;
openair0_cfg[card].samples_per_frame = 153600;
openair0_cfg[card].tx_bw = 5e6;
openair0_cfg[card].rx_bw = 5e6;
} else if (frame_parms->N_RB_DL == 25) {
openair0_cfg[card].sample_rate=7.68e6;
openair0_cfg[card].samples_per_frame = 76800;
openair0_cfg[card].tx_bw = 2.5e6;
openair0_cfg[card].rx_bw = 2.5e6;
} else if (frame_parms->N_RB_DL == 6) {
openair0_cfg[card].sample_rate=1.92e6;
openair0_cfg[card].samples_per_frame = 19200;
openair0_cfg[card].tx_bw = 1.5e6;
openair0_cfg[card].rx_bw = 1.5e6;
}
@@ -374,7 +369,6 @@ static void init_openair0(LTE_DL_FRAME_PARMS *frame_parms, int rxgain)
else //FDD
openair0_cfg[card].duplex_mode = duplex_mode_FDD;
openair0_cfg[card].Mod_id = 0;
openair0_cfg[card].num_rb_dl=frame_parms->N_RB_DL;
openair0_cfg[card].clock_source = get_softmodem_params()->clock_source;
openair0_cfg[card].time_source = get_softmodem_params()->timing_source;
executables/nr-ru.c
-2
View File
@@ -819,7 +819,6 @@ static void fill_rf_config(RU_t *ru, char *rf_config_file)
N_RB,
fp->threequarter_fs,
&cfg->sample_rate,
&cfg->samples_per_frame,
&cfg->tx_bw,
&cfg->rx_bw);
@@ -833,7 +832,6 @@ static void fill_rf_config(RU_t *ru, char *rf_config_file)
AssertFatal(ru->nb_tx > 0 && ru->nb_tx <= 8, "openair0 does not support more than 8 antennas\n");
AssertFatal(ru->nb_rx > 0 && ru->nb_rx <= 8, "openair0 does not support more than 8 antennas\n");
cfg->Mod_id = 0;
cfg->num_rb_dl = N_RB;
cfg->tx_num_channels = ru->nb_tx * ru->num_beams_period;
cfg->rx_num_channels = ru->nb_rx * ru->num_beams_period;
executables/nr-softmodem-common.h
+15 -93
View File
@@ -29,109 +29,31 @@
#include "PHY/types.h"
/* help strings definition for command line options, used in CMDLINE_XXX_DESC macros and printed when -h option is used */
#define CONFIG_HLP_RFCFGF "Configuration file for front-end (e.g. LMS7002M)\n"
#define CONFIG_HLP_ULMAXE "set the eNodeB max ULSCH erros\n"
#define CONFIG_HLP_CALUER "set UE RX calibration\n"
#define CONFIG_HLP_CALUERM ""
#define CONFIG_HLP_CALUERB ""
#define CONFIG_HLP_DBGUEPR "UE run normal prach power ramping, but don't continue random-access\n"
#define CONFIG_HLP_CALPRACH "UE run normal prach with maximum power, but don't continue random-access\n"
#define CONFIG_HLP_NOL2CN "bypass L2 and upper layers\n"
#define CONFIG_HLP_DLMCS_PHYTEST "Set the downlink MCS for PHYTEST mode\n"
#define CONFIG_HLP_DLNL_PHYTEST "Set the downlink nrOfLayers for PHYTEST mode\n"
#define CONFIG_HLP_ULNL_PHYTEST "Set the uplink nrOfLayers for PHYTEST mode\n"
#define CONFIG_HLP_DLBW_PHYTEST "Set the number of PRBs used for DLSCH in PHYTEST mode\n"
#define CONFIG_HLP_ULBW_PHYTEST "Set the number of PRBs used for ULSCH in PHYTEST mode\n"
#define CONFIG_HLP_UECAP_FILE "path for UE Capabilities file\n"
#define CONFIG_HLP_USRP_ARGS "set the arguments to identify USRP (same syntax as in UHD)\n"
#define CONFIG_HLP_TX_SUBDEV "set the arguments to select tx_subdev (same syntax as in UHD)\n"
#define CONFIG_HLP_RX_SUBDEV "set the arguments to select rx_subdev (same syntax as in UHD)\n"
#define CONFIG_HLP_VCD "Enable VCD (generated file will is named openair_dump_eNB.vcd, read it with target/RT/USER/eNB.gtkw\n"
#define CONFIG_HLP_RE_CFG_FILE "filename for reconfig.raw in phy-test mode\n"
#define CONFIG_HLP_RB_CFG_FILE "filename for rbconfig.raw in phy-test mode\n"
#define CONFIG_HLP_UERXG "set UE RX gain\n"
#define CONFIG_HLP_UETXG "set UE TX gain\n"
#define CONFIG_HLP_UENANTR "set UE number of rx antennas\n"
#define CONFIG_HLP_UENANTT "set UE number of tx antennas\n"
#define CONFIG_HLP_UESCAN "set UE to scan all possible GSCN in current bandwidth\n"
#define CONFIG_HLP_UEFO "set UE to enable estimation and compensation of frequency offset\n"
#define CONFIG_HLP_DUMPFRAME "dump UE received frame to rxsig_frame0.dat and exit\n"
#define CONFIG_HLP_PHYTST "test UE phy layer, mac disabled\n"
#define CONFIG_HLP_DORA "test gNB and UE with RA procedures\n"
#define CONFIG_HLP_DMAMAP "use DMA memory mapping\n"
#define CONFIG_HLP_EXCCLK "tells hardware to use a clock reference (0:internal(default), 1:external, 2:gpsdo)\n"
#define CONFIG_HLP_USIM "use XOR autentication algo in case of test usim mode\n"
#define CONFIG_HLP_DLF "Set the downlink frequency for all component carriers\n"
#define CONFIG_HLP_ULOFF "Set the uplink frequnecy offset for all component carriers\n"
#define CONFIG_HLP_CHOFF "Channel id offset\n"
#define CONFIG_HLP_SOFTS "Enable soft scope and L1 and L2 stats (Xforms)\n"
#define CONFIG_HLP_ITTIL "Generate ITTI analyzser logs (similar to wireshark logs but with more details)\n"
#define CONFIG_HLP_DLMCS_PHYTEST "Set the downlink MCS for PHYTEST mode\n"
#define CONFIG_HLP_DLNL_PHYTEST "Set the downlink nrOfLayers for PHYTEST mode\n"
#define CONFIG_HLP_ULNL_PHYTEST "Set the uplink nrOfLayers for PHYTEST mode\n"
#define CONFIG_HLP_STMON "Enable processing timing measurement of lte softmodem on per subframe basis \n"
#define CONFIG_HLP_MSLOTS "Skip the missed slots/subframes \n"
#define CONFIG_HLP_PRB_SA "Set the number of PRBs for SA\n"
#define CONFIG_HLP_SSC "Set the start subcarrier \n"
#define CONFIG_HLP_DISABLETIMECORR "disable UE timing correction\n"
#define CONFIG_HLP_ULMCS_PHYTEST "Set the uplink MCS for PHYTEST mode\n"
#define CONFIG_HLP_DLBW_PHYTEST "Set the number of PRBs used for DLSCH in PHYTEST mode\n"
#define CONFIG_HLP_ULBW_PHYTEST "Set the number of PRBs used for ULSCH in PHYTEST mode\n"
#define CONFIG_HLP_PRB_SA "Set the number of PRBs for SA\n"
#define CONFIG_HLP_DLBM_PHYTEST "Bitmap for DLSCH slots in period (slot 0 starts at LSB)\n"
#define CONFIG_HLP_ULBM_PHYTEST "Bitmap for ULSCH slots in period (slot 0 starts at LSB)\n"
#define CONFIG_HLP_SSC "Set the start subcarrier \n"
#define CONFIG_HLP_TDD "Set hardware to TDD mode (default: FDD). Used only with -U (otherwise set in config file).\n"
#define CONFIG_HLP_UE "Set the lte softmodem as a UE\n"
#define CONFIG_HLP_L2MONW "Enable L2 wireshark messages on localhost \n"
#define CONFIG_HLP_L2MONP "Enable L2 pcap messages on localhost \n"
#define CONFIG_HLP_MAC "Disable the MAC procedures at UE side (default is enabled)\n"
#define CONFIG_HLP_VCD "Enable VCD (generated file will is named openair_dump_eNB.vcd, read it with target/RT/USER/eNB.gtkw\n"
#define CONFIG_HLP_TPORT "tracer port\n"
#define CONFIG_HLP_NOTWAIT "don't wait for tracer, start immediately\n"
#define CONFIG_HLP_TNOFORK "to ease debugging with gdb\n"
#define CONFIG_HLP_DISABLNBIOT "disable nb-iot, even if defined in config\n"
#define CONFIG_HLP_DISABLETIMECORR "disable UE timing correction\n"
#define CONFIG_HLP_RE_CFG_FILE "filename for reconfig.raw in phy-test mode\n"
#define CONFIG_HLP_RB_CFG_FILE "filename for rbconfig.raw in phy-test mode\n"
#define CONFIG_HLP_UECAP_FILE "path for UE Capabilities file\n"
#define CONFIG_HLP_NUMEROLOGY "adding numerology for 5G\n"
#define CONFIG_HLP_EMULATE_RF "Emulated RF enabled(disable by defult)\n"
#define CONFIG_HLP_USRP_THREAD "having extra thead for usrp tx\n"
#define CONFIG_HLP_DISABLNBIOT "disable nb-iot, even if defined in config\n"
#define CONFIG_HLP_USRP_ARGS "set the arguments to identify USRP (same syntax as in UHD)\n"
#define CONFIG_HLP_TX_SUBDEV "set the arguments to select tx_subdev (same syntax as in UHD)\n"
#define CONFIG_HLP_RX_SUBDEV "set the arguments to select rx_subdev (same syntax as in UHD)\n"
#define CONFIG_HLP_FLOG "Enable online log \n"
#define CONFIG_HLP_LOGL "Set the global log level, valid options: (4:trace, 3:debug, 2:info, 1:warn, (0:error))\n"
#define CONFIG_HLP_LOGV "Set the global log verbosity \n"
#define CONFIG_HLP_TELN "Start embedded telnet server \n"
#define CONFIG_HLP_SNR "Set average SNR in dB (for --siml1 option)\n"
#define CONFIG_HLP_NOS1 "Disable s1 interface\n"
/*--------------------------------------------------------------------------------------------------------------------------------*/
/* command line parameters for LOG utility */
/* optname helpstr paramflags XXXptr defXXXval type numelt */
/*--------------------------------------------------------------------------------------------------------------------------------*/
#define CMDLINE_LOGPARAMS_DESC_NR { \
{"R" , CONFIG_HLP_FLOG, 0, uptr:&online_log_messages, defintval:1, TYPE_INT, 0}, \
{"g" , CONFIG_HLP_LOGL, 0, uptr:&glog_level, defintval:0, TYPE_UINT, 0}, \
{"G" , CONFIG_HLP_LOGV, 0, uptr:&glog_verbosity, defintval:0, TYPE_UINT16, 0}, \
{"telnetsrv", CONFIG_HLP_TELN, PARAMFLAG_BOOL, uptr:&start_telnetsrv, defintval:0, TYPE_UINT, 0}, \
}
#define CMDLINE_ONLINELOG_IDX 0
#define CMDLINE_GLOGLEVEL_IDX 1
#define CMDLINE_GLOGVERBO_IDX 2
#define CMDLINE_STARTTELN_IDX 3
/***************************************************************************************************************************************/
extern pthread_cond_t sync_cond;
extern pthread_mutex_t sync_mutex;
extern int sync_var;
extern uint64_t downlink_frequency[MAX_NUM_CCs][4];
extern int32_t uplink_frequency_offset[MAX_NUM_CCs][4];
extern int oai_exit;
extern pthread_cond_t sync_cond;
extern pthread_mutex_t sync_mutex;
extern int sync_var;
extern int transmission_mode;
extern double cpuf;
extern int numerology;
extern int usrp_tx_thread;
void wait_gNBs(void);
#endif
executables/nr-ue-ru.c
-2
View File
@@ -303,14 +303,12 @@ void nrue_init_openair0(void)
openair0_config_t *cfg = &openair0_cfg[ru_id];
cfg->configFilename = NULL;
cfg->sample_rate = frame_parms->samples_per_subframe * 1e3;
cfg->samples_per_frame = frame_parms->samples_per_frame;
if (frame_parms->frame_type == TDD)
cfg->duplex_mode = duplex_mode_TDD;
else
cfg->duplex_mode = duplex_mode_FDD;
cfg->Mod_id = 0;
cfg->ru_id = ru_id;
cfg->num_rb_dl = frame_parms->N_RB_DL;
cfg->tx_num_channels = min(4, frame_parms->nb_antennas_tx);
executables/nr-uesoftmodem.h
-8
View File
@@ -31,14 +31,6 @@ extern uint16_t ue_id_g;
/* command line options definitions, CMDLINE_XXXX_DESC macros are used to initialize paramdef_t arrays which are then used as argument
when calling config_get or config_getlist functions */
#define CALIBRX_OPT "calib-ue-rx"
#define CALIBRXMED_OPT "calib-ue-rx-med"
#define CALIBRXBYP_OPT "calib-ue-rx-byp"
#define DBGPRACH_OPT "debug-ue-prach"
#define NOL2CONNECT_OPT "no-L2-connect"
#define CALIBPRACH_OPT "calib-prach-tx"
#define DUMPFRAME_OPT "ue-dump-frame"
/*------------------------------------------------------------------------------------------------------------------------------------------*/
/* command line parameters defining UE running mode */
/* optname helpstr paramflags XXXptr defXXXval type numelt */
executables/softmodem-common.h
+4 -17
View File
@@ -41,13 +41,12 @@ extern "C"
/* help strings definition for command line options, used in CMDLINE_XXX_DESC macros and printed when -h option is used */
#define CONFIG_HLP_RFCFGF "Configuration file for front-end (e.g. LMS7002M)\n"
#define CONFIG_HLP_SPLIT73 "Split 7.3 (below rate matching) option: <cu|du>:<remote ip address>:<remote port>\n"
#define CONFIG_HLP_TPOOL "Thread pool configuration: \n\
#define CONFIG_HLP_TPOOL \
"Thread pool configuration: \n\
list of cores, comma separated (negative value is no core affinity)\n\
example: -1,3 launches two working threads one floating, the second set on core 3\n\
default 8 floating threads\n\
use N for no pool (runs in calling thread) recommended with rfsim.\n"
#define CONFIG_HLP_ULMAXE "set the eNodeB max ULSCH erros\n"
#define CONFIG_HLP_CALUER "set UE RX calibration\n"
#define CONFIG_HLP_CALUERM ""
#define CONFIG_HLP_CALUERB ""
@@ -59,40 +58,29 @@ extern "C"
#define CONFIG_HLP_DUMPFRAME "dump UE received frame to rxsig_frame0.dat and exit\n"
#define CONFIG_HLP_PHYTST "test UE phy layer, mac disabled\n"
#define CONFIG_HLP_DORA "test gNB and UE with RA procedures\n"
#define CONFIG_HLP_SA "run gNB in standalone mode\n"
#define CONFIG_HLP_SL_MODE "sets the NR sidelink mode (0: not in sidelink mode, 1: in-coverage/gNB, 2: out-of-coverage/no gNB)\n"
#define CONFIG_HLP_EXTS "tells hardware to use an external timing reference\n"
#define CONFIG_HLP_DMRSSYNC "tells RU to insert DMRS in subframe 1 slot 0"
#define CONFIG_HLP_CLK "tells hardware to use a clock reference (0:internal, 1:external, 2:gpsdo)\n"
#define CONFIG_HLP_TME "tells hardware to use a time reference (0:internal, 1:external, 2:gpsdo)\n"
#define CONFIG_HLP_TUNE_OFFSET "LO tuning offset to use in Hz\n"
#define CONFIG_HLP_NOSNGLT "Disables single-thread mode in lte-softmodem\n"
#define CONFIG_HLP_DLF "Set the downlink frequency for all component carriers\n"
#define CONFIG_HLP_ULF "Set the uplink frequency offset for all component carriers\n"
#define CONFIG_HLP_SLF "Set the sidelink frequency for all component carriers\n"
#define CONFIG_HLP_CHOFF "Channel id offset\n"
#define CONFIG_HLP_SOFTS "Enable soft scope and L1 and L2 stats (Xforms)\n"
#define CONFIG_HLP_ITTIL "Generate ITTI analyzser logs (similar to wireshark logs but with more details)\n"
#define CONFIG_HLP_DLMCS "Set the maximum downlink MCS\n"
#define CONFIG_HLP_STMON "Enable processing timing measurement of lte softmodem on per subframe basis \n"
#define CONFIG_HLP_256QAM "Use the 256 QAM mcs table for PDSCH\n"
#define CONFIG_HLP_CHESTFREQ "Set channel estimation type in frequency domain. 0-Linear interpolation (default). 1-PRB based averaging of channel estimates in frequency. \n"
#define CONFIG_HLP_CHESTTIME "Set channel estimation type in time domain. 0-Symbols take estimates of the last preceding DMRS symbol (default). 1-Symbol based averaging of channel estimates in time. \n"
#define CONFIG_HLP_IMSCOPE "Enable phy scope based on imgui and implot"
#define CONFIG_HLP_IMSCOPE_RECORD "Enable recording scope data to filesystem"
#define CONFIG_HLP_NONSTOP "Go back to frame sync mode after 100 consecutive PBCH failures\n"
//#define CONFIG_HLP_NUMUES "Set the number of UEs for the emulation"
#define CONFIG_HLP_MSLOTS "Skip the missed slots/subframes \n"
#define CONFIG_HLP_ULMCS "Set the maximum uplink MCS\n"
#define CONFIG_HLP_UE "Set the lte softmodem as a UE\n"
#define CONFIG_HLP_TQFS \
"Apply three-quarter of sampling frequency, (example 23.04 Msps for LTE 20MHz) to reduce the data rate on USB/PCIe transfers " \
"(only valid for some bandwidths)\n"
#define CONFIG_HLP_TPORT "tracer port\n"
#define CONFIG_HLP_NOTWAIT "don't wait for tracer, start immediately\n"
#define CONFIG_HLP_TNOFORK "to ease debugging with gdb\n"
#define CONFIG_HLP_NUMEROLOGY "adding numerology for 5G\n"
#define CONFIG_HLP_BAND "band index\n"
@@ -129,7 +117,6 @@ extern "C"
#define CLOCK_SOURCE softmodem_params.clock_source
#define TIMING_SOURCE softmodem_params.timing_source
#define TUNE_OFFSET softmodem_params.tune_offset
#define SEND_DMRSSYNC softmodem_params.send_dmrs_sync
#define CHEST_FREQ softmodem_params.chest_freq
#define CHEST_TIME softmodem_params.chest_time
#define NFAPI softmodem_params.nfapi
@@ -140,8 +127,6 @@ extern "C"
#define SYNC_REF softmodem_params.sync_ref
#define DEFAULT_PDU_ID softmodem_params.default_pdu_session_id
#define DEFAULT_RFCONFIG_FILE "/usr/local/etc/syriq/ue.band7.tm1.PRB100.NR40.dat";
extern int usrp_tx_thread;
// clang-format off
#define CMDLINE_PARAMS_DESC { \
@@ -358,6 +343,8 @@ struct timespec timespec_sub(struct timespec lhs, struct timespec rhs);
extern uint8_t nfapi_mode;
extern char *parallel_config;
extern char *worker_config;
extern double cpuf;
#ifdef __cplusplus
}
#endif