diff --git a/cmake_targets/autotests/README.txt b/cmake_targets/autotests/README.txt
index 8f6136c546..a370ae573d 100644
--- a/cmake_targets/autotests/README.txt
+++ b/cmake_targets/autotests/README.txt
@@ -27,24 +27,24 @@ Obj.# Case# Test# Description
-01 02 Run OAISIM-NOS1 Rel10 (TDD + 5MHz/10MHz/20MHz + TM 1,2,5,6), and check the operation
-01 02 00 Run OAISIM-NOS1 Rel10 TDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2,5,6) and search for errors, segmentation fault or exit
-01 02 01 Run OAISIM-NOS1 Rel10 TDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2,5,6) in PHY_ABSTRACTION mode and search for errors
-01 02 02 Run OAISIM-NOS1 Rel10 TDD, 1 eNB + 3 UEs (5 MHz/10MHz/20MHz), (TM 1,2,5,6) and search for errors, segmentation fault or exit
-01 02 03 Run OAISIM-NOS1 Rel10 TDD, 1 eNB + 3 UEs (5 MHz/10MHz/20MHz), (TM 1,2,5,6) in PHY_ABSTRACTION mode and search for errors
-01 02 04 Run OAISIM-NOS1 Rel10 TDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2,5,6) without PHY_ABSTRACTION mode, ping from from eNB to UE,
+01 02 Run OAISIM-NOS1 Rel10 (TDD + 5MHz/10MHz/20MHz + TM 1,2), and check the operation
+01 02 00 Run OAISIM-NOS1 Rel10 TDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2) and search for errors, segmentation fault or exit
+01 02 01 Run OAISIM-NOS1 Rel10 TDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2) in PHY_ABSTRACTION mode and search for errors
+01 02 02 Run OAISIM-NOS1 Rel10 TDD, 1 eNB + 3 UEs (5 MHz/10MHz/20MHz), (TM 1,2) and search for errors, segmentation fault or exit
+01 02 03 Run OAISIM-NOS1 Rel10 TDD, 1 eNB + 3 UEs (5 MHz/10MHz/20MHz), (TM 1,2) in PHY_ABSTRACTION mode and search for errors
+01 02 04 Run OAISIM-NOS1 Rel10 TDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2) without PHY_ABSTRACTION mode, ping from from eNB to UE,
and for check for no packet losses
-01 02 05 Run OAISIM-NOS1 Rel10 TDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2,5,6) in PHY_ABSTRACTION mode, send ping from from eNB to UE,
+01 02 05 Run OAISIM-NOS1 Rel10 TDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2) in PHY_ABSTRACTION mode, send ping from from eNB to UE,
and check for no packet losses
-01 03 Run OAISIM-NOS1 Rel10 (FDD + 5MHz/10MHz/20MHz + TM 1,2,5,6), and check the operation
-01 03 00 Run OAISIM-NOS1 Rel10 FDD, 1 eNB + 1 UE 1 eNB (5 MHz/10MHz/20MHz), (TM 1,2,5,6) and search for errors, segmentation fault or exit
-01 03 01 Run OAISIM-NOS1 Rel10 FDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2,5,6) in PHY_ABSTRACTION mode and search for errors
-01 03 02 Run OAISIM-NOS1 Rel10 FDD, 1 eNB + 3 UEs (5 MHz/10MHz/20MHz), (TM 1,2,5,6) and search for errors, segmentation fault or exit
-01 03 03 Run OAISIM-NOS1 Rel10 FDD, 1 eNB + 3 UEs (5 MHz/10MHz/20MHz), (TM 1,2,5,6) in PHY_ABSTRACTION mode and search for errors
-01 03 04 Run OAISIM-NOS1 Rel10 FDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2,5,6) without PHY_ABSTRACTION mode, ping from from eNB to UE,
+01 03 Run OAISIM-NOS1 Rel10 (FDD + 5MHz/10MHz/20MHz + TM 1,2), and check the operation
+01 03 00 Run OAISIM-NOS1 Rel10 FDD, 1 eNB + 1 UE 1 eNB (5 MHz/10MHz/20MHz), (TM 1,2) and search for errors, segmentation fault or exit
+01 03 01 Run OAISIM-NOS1 Rel10 FDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2) in PHY_ABSTRACTION mode and search for errors
+01 03 02 Run OAISIM-NOS1 Rel10 FDD, 1 eNB + 3 UEs (5 MHz/10MHz/20MHz), (TM 1,2) and search for errors, segmentation fault or exit
+01 03 03 Run OAISIM-NOS1 Rel10 FDD, 1 eNB + 3 UEs (5 MHz/10MHz/20MHz), (TM 1,2) in PHY_ABSTRACTION mode and search for errors
+01 03 04 Run OAISIM-NOS1 Rel10 FDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2) without PHY_ABSTRACTION mode, ping from from eNB to UE,
and for check for no packet losses
-01 03 05 Run OAISIM-NOS1 Rel10 FDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2,5,6) in PHY_ABSTRACTION mode, send ping from from eNB to UE,
+01 03 05 Run OAISIM-NOS1 Rel10 FDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2) in PHY_ABSTRACTION mode, send ping from from eNB to UE,
and check for no packet losses
@@ -97,31 +97,49 @@ Obj.# Case# Test# Description
01 51 06 mbmssim (TBD)
-01 55 lte-softmodem tests with USRP B210 RF as eNB and ALU EPC w/ Bandrich COTS UE for `TX/1RX, 1TX/2RX, 2TX/1RX 2TX/2RX
+01 55 lte-softmodem tests with USRP B210 RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX, 2TX/2RX
01 55 00 Band 7 FDD 5MHz UL Throughput for 60 sec for 1TX/1RX
-01 55 00 Band 7 FDD 10MHz UL Throughput for 60 sec
-01 55 00 Band 7 FDD 20MHz UL Throughput for 60 sec
-01 55 00 Band 7 FDD 5MHz DL Throughput for 60 sec
-01 55 00 Band 7 FDD 10MHz DL Throughput for 60 sec
-01 55 00 Band 7 FDD 20MHz DL Throughput for 60 sec
-
+01 55 01 Band 7 FDD 10MHz UL Throughput for 60 sec for 1TX/1RX
+01 55 02 Band 7 FDD 20MHz UL Throughput for 60 sec for 1TX/1RX
+01 55 03 Band 7 FDD 5MHz DL Throughput for 60 sec for 1TX/1RX
+01 55 04 Band 7 FDD 10MHz DL Throughput for 60 sec for 1TX/1RX
+01 55 05 Band 7 FDD 20MHz DL Throughput for 60 sec for 1TX/1RX
+01 55 06 Band 7 FDD 5MHz UL Throughput for 60 sec for 2TX/2RX
+01 55 07 Band 7 FDD 10MHz UL Throughput for 60 sec for 2TX/2RX
+01 55 08 Band 7 FDD 20MHz UL Throughput for 60 sec for 2TX/2RX
+01 55 09 Band 7 FDD 5MHz DL Throughput for 60 sec for 2TX/2RX
+01 55 10 Band 7 FDD 10MHz DL Throughput for 60 sec for 2TX/2RX
+01 55 11 Band 7 FDD 20MHz DL Throughput for 60 sec for 2TX/2RX
01 56 lte-softmodem tests with USRP B210 RF as eNB and OAI EPC (eNB and EPC are on same machines) w/ Bandrich COTS UE
01 57 lte-softmodem tests with USRP B210 RF as eNB and OAI EPC (eNB and EPC are on different machines) w/ Bandrich COTS UE
-01 58 lte-softmodem tests with USRP X310 RF as eNB and ALU EPC w/ Bandrich COTS UE for `TX/1RX, 1TX/2RX, 2TX/1RX 2TX/2RX
+01 58 lte-softmodem tests with USRP X310 RF as eNB and ALU EPC w/ Bandrich COTS UE for `TX/1RX, 2TX/2RX
+01 58 00 Band 7 FDD 5MHz UL Throughput for 60 sec for 1TX/1RX
+01 58 01 Band 7 FDD 10MHz UL Throughput for 60 sec for 1TX/1RX
+01 58 02 Band 7 FDD 20MHz UL Throughput for 60 sec for 1TX/1RX
+01 58 03 Band 7 FDD 5MHz DL Throughput for 60 sec for 1TX/1RX
+01 58 04 Band 7 FDD 10MHz DL Throughput for 60 sec for 1TX/1RX
+01 58 05 Band 7 FDD 20MHz DL Throughput for 60 sec for 1TX/1RX
01 59 lte-softmodem tests with USRP X310 RF as eNB and OAI EPC (eNB and EPC are on same machines) w/ Bandrich COTS UE
01 61 lte-softmodem tests with USRP X310 RF as eNB and OAI EPC (eNB and EPC are on different machines) w/ Bandrich COTS UE
-01 61 lte-softmodem tests with EXMIMO RF as eNB and ALU EPC w/ Bandrich COTS UE
+01 61 lte-softmodem tests with EXMIMO RF as eNB and ALU EPC w/ Bandrich COTS UE for `TX/1RX, 2TX/2RX
+01 61 00 Band 7 FDD 5MHz UL Throughput for 60 sec for 1TX/1RX
+01 61 01 Band 7 FDD 10MHz UL Throughput for 60 sec for 1TX/1RX
+01 61 02 Band 7 FDD 20MHz UL Throughput for 60 sec for 1TX/1RX
+01 61 03 Band 7 FDD 5MHz DL Throughput for 60 sec for 1TX/1RX
+01 61 04 Band 7 FDD 10MHz DL Throughput for 60 sec for 1TX/1RX
+01 61 05 Band 7 FDD 20MHz DL Throughput for 60 sec for 1TX/1RX
+
01 62 lte-softmodem tests with EXMIMO RF as eNB and OAI EPC (eNB and EPC are on same machines) w/ Bandrich COTS UE
01 63 lte-softmodem tests with EXMIMO RF as eNB and OAI EPC (eNB and EPC are on different machines) w/ Bandrich COTS UE
-01 58 lte-softmodem-noS1 tests
+01 64 lte-softmodem-noS1 tests
02 Functional test case
diff --git a/cmake_targets/autotests/core.py b/cmake_targets/autotests/core.py
index c899069f89..8881781144 100644
--- a/cmake_targets/autotests/core.py
+++ b/cmake_targets/autotests/core.py
@@ -181,7 +181,8 @@ class core:
rsp2 = self.prompt2
self.wait_quiet()
if sudo == True:
- command = 'echo \'' + self.password + '\' | sudo -S -E ' + command
+ #command = 'echo \'' + self.password + '\' | sudo -S -E ' + command
+ command = 'echo \'' + '' + '\' | sudo -S -E bash -c \' ' + command + '\' '
if self.send_cr:
log.stats['cmd'] += 1
self.oai.sendline(command)
diff --git a/cmake_targets/autotests/openair.py b/cmake_targets/autotests/openair.py
index e0acf31cb8..e8d07ba1e1 100644
--- a/cmake_targets/autotests/openair.py
+++ b/cmake_targets/autotests/openair.py
@@ -43,6 +43,7 @@ import shutil
import subprocess
import sys
import traceback
+import time
# import call
from core import *
@@ -82,6 +83,7 @@ class openair(core):
return (stdout, stderr)
def connect(self, username, password, prompt='PEXPECT_OAI'):
+ while True:
self.prompt1 = prompt
self.prompt2 = prompt
self.password = ''
@@ -103,13 +105,15 @@ class openair(core):
self.oai.sendline('uptime')
self.oai.prompt()
print self.oai.before
-
+ break
except Exception, e:
error=''
error = error + ' In function: ' + sys._getframe().f_code.co_name + ': *** Caught exception: ' + str(e.__class__) + " : " + str( e)
error = error + traceback.format_exc()
print error
- sys.exit(1)
+ print "Retrying again in 60 seconds"
+ time.sleep(60)
+ #sys.exit(1)
def connect2(self, username, password, prompt='$'):
self.prompt1 = prompt
@@ -190,7 +194,7 @@ class openair(core):
error = error + ' In function: ' + sys._getframe().f_code.co_name + ': *** Caught exception: ' + str(e.__class__) + " : " + str( e)
error = error + traceback.format_exc()
print error
- sys.exit(1)
+ #sys.exit(1)
def rm_driver(self,oai,user, pw):
try:
@@ -205,7 +209,7 @@ class openair(core):
error = error + ' In function: ' + sys._getframe().f_code.co_name + ': *** Caught exception: ' + str(e.__class__) + " : " + str( e)
error = error + traceback.format_exc()
print error
- sys.exit(1)
+ #sys.exit(1)
def driver(self,oai,user,pw):
#pwd = oai.send_recv('pwd')
@@ -222,7 +226,7 @@ class openair(core):
error = error + ' In function: ' + sys._getframe().f_code.co_name + ': *** Caught exception: ' + str(e.__class__) + " : " + str( e)
error = error + traceback.format_exc()
print error
- sys.exit(1)
+ #sys.exit(1)
def cleandir (self, logdir,debug) :
@@ -238,8 +242,8 @@ class openair(core):
error = error + ' In function: ' + sys._getframe().f_code.co_name + ': *** Caught exception: ' + str(e.__class__) + " : " + str( e)
error = error + traceback.format_exc()
print error
- sys.exit(1)
- #print 'Could not remove the filepath'+ filepath + ' with error ' + OSError
+ #sys.exit(1)
+ #print 'Could not remove the filepath'+ filepath + ' with error ' + OSError
def create_dir(self,dirname,debug) :
if not os.path.exists(dirname) :
diff --git a/cmake_targets/autotests/run_exec_autotests.bash b/cmake_targets/autotests/run_exec_autotests.bash
index a447ac3b93..836a8c197a 100755
--- a/cmake_targets/autotests/run_exec_autotests.bash
+++ b/cmake_targets/autotests/run_exec_autotests.bash
@@ -400,12 +400,13 @@ else
fi
tmpfile=`mktemp`
-echo \'$passwd\' | sudo echo $HOME >& $tmpfile
+echo \'$passwd\' | $SUDO echo $HOME >& $tmpfile
tstsudo=`cat $tmpfile`
if [ "$tstsudo" != "$HOME" ]; then
- echo "User might not have sudo privileges. Exiting"
- echo "tstsudo = $tstsudo"
+ echo "$USER might not have sudo privileges. Exiting"
exit
+else
+ echo "$USER has sudo privileges"
fi
echo "tstsudo = $tstsudo"
rm -fr $tmpfile
@@ -495,6 +496,7 @@ for search_expr in "${test_case_array[@]}"
if [ "$class" == "compilation" ]; then
test_compile "$name" "$compile_prog" "$compile_prog_args" "$pre_exec" "$pre_exec_args" "$main_exec" "$main_exec_args" "search_array_true[@]" "$search_expr_false" "$nruns" "$pre_compile_prog" "$class" "$compile_prog_out" "$tags"
elif [ "$class" == "execution" ]; then
+ $SUDO killall -q oaisim_nos1
test_compile_and_run "$name" "$compile_prog" "$compile_prog_args" "$pre_exec" "$pre_exec_args" "$main_exec" "$main_exec_args" "search_array_true[@]" "$search_expr_false" "$nruns" "$pre_compile_prog" "$class" "$compile_prog_out" "$tags" "$mypassword"
else
echo "Unexpected class of test case...Skipping the test case $name ...."
diff --git a/cmake_targets/autotests/run_exec_lte-softmodem_tests.py b/cmake_targets/autotests/run_exec_lte-softmodem_tests.py
index 4bbe55e285..b76b5f9698 100644
--- a/cmake_targets/autotests/run_exec_lte-softmodem_tests.py
+++ b/cmake_targets/autotests/run_exec_lte-softmodem_tests.py
@@ -52,11 +52,6 @@ import re
import numpy as np
import log
-import case01
-import case02
-import case03
-import case04
-import case05
from openair import *
@@ -81,8 +76,8 @@ def write_file(filename, string, mode="w"):
#$5 minimum duration of throughput
#The throughput values found in file must be higher than values from from 2,3,4,5
#The function returns True if throughput conditions are saisfied else it returns fails
-
def tput_test(filename, min_tput, max_tput, average, min_duration):
+
if os.path.exists(filename):
with open (filename, "r") as myfile:
data=myfile.read()
@@ -98,13 +93,13 @@ def tput_test(filename, min_tput, max_tput, average, min_duration):
min_list = 0
max_list = 0
average_list=0
-
+ tput_string=' ( '+ "min=%0.2f" % min_list + ' Mbps / ' + "max=%0.2f" % max_list + ' Mbps / ' + "avg=%0.2f" % average_list + ' Mbps / ' + "dur=%0.2f" % duration + ' s) '
if (min_list >= min_tput and max_list >= max_tput and average_list >= average and duration >= min_duration):
- return True
+ return True , tput_string
else:
- return False
+ return False , tput_string
else:
- return False
+ return False , tput_string
def try_convert_to_float(string, fail=None):
@@ -115,6 +110,7 @@ def try_convert_to_float(string, fail=None):
def tput_test_search_expr (search_expr, logfile_traffic):
result=0
+ tput_string=''
if search_expr !='':
if search_expr.find('throughput_test')!= -1 :
p= re.compile('min\s*=\s*(\d*.\d*)\s*Mbits/sec')
@@ -151,9 +147,11 @@ def tput_test_search_expr (search_expr, logfile_traffic):
duration = try_convert_to_float(duration)
if (min_tput != None and max_tput != None and avg_tput != None and duration != None ):
- result = tput_test(logfile_traffic, min_tput, max_tput, avg_tput, duration)
- return result
+ result, tput_string = tput_test(logfile_traffic, min_tput, max_tput, avg_tput, duration)
+ else:
+ result=1
+ return result, tput_string
def sftp_module (username, password, hostname, ports, paramList,logfile):
@@ -254,12 +252,28 @@ def update_config_file(oai, config_string, logdirRepo, python_script):
return cmd
#result = oai.send_recv(cmd)
+def SSHSessionWrapper(machine, username, key_file, password, logdir_remote_testcase, logdir_local_base):
+ while True:
+ try:
+ ssh = SSHSession(machine , username, key_file, password)
+ ssh.get_all(logdir_remote_testcase , logdir_local_base)
+ break
+ except Exception, e:
+ error=''
+ error = error + ' In Class = function: ' + sys._getframe().f_code.co_name + ': *** Caught exception: ' + str(e.__class__) + " : " + str( e)
+ error = error + '\n username = ' + username + '\n machine = ' + machine + '\n logdir_remote = ' + logdir_remote_testcase + '\n logdir_local_base = ' + logdir_local_base
+ error = error + traceback.format_exc()
+ print error
+ print " Trying again in 60 seconds"
+ time.sleep(60)
+ print "Continuing ..."
+
#Function to clean old programs that might be running from earlier execution
#oai - parameter for making connection to machine
#programList - list of programs that must be terminated before execution of any test case
-def cleanOldPrograms(oai, programList, CleanUpAluLteBox):
+def cleanOldPrograms(oai, programList, CleanUpAluLteBox, ExmimoRfStop):
cmd = 'killall -q -r ' + programList
result = oai.send(cmd, True)
print "Killing old programs..." + result
@@ -271,7 +285,7 @@ def cleanOldPrograms(oai, programList, CleanUpAluLteBox):
result = oai.send_expect_false(cmd, 'Match found', False)
print result
res=oai.send_recv(CleanUpAluLteBox, True)
-
+ res = oai.send_recv(ExmimoRfStop, True)
class myThread (threading.Thread):
def __init__(self, threadID, name, counter):
@@ -313,7 +327,7 @@ class oaiThread (threading.Thread):
#This class runs test cases with class execution, compilatation
class testCaseThread_generic (threading.Thread):
- def __init__(self, threadID, name, machine, logdirOAI5GRepo, testcasename,oldprogramList, CleanupAluLteBox, password, timeout):
+ def __init__(self, threadID, name, machine, logdirOAI5GRepo, testcasename,oldprogramList, CleanupAluLteBox, password, timeout, ExmimoRfStop):
threading.Thread.__init__(self)
self.threadID = threadID
self.name = name
@@ -324,6 +338,7 @@ class testCaseThread_generic (threading.Thread):
self.oldprogramList = oldprogramList
self.CleanupAluLteBox = CleanupAluLteBox
self.password=password
+ self.ExmimoRfStop = ExmimoRfStop
def run(self):
try:
mypassword=''
@@ -333,7 +348,7 @@ class testCaseThread_generic (threading.Thread):
print "Starting test case : " + self.testcasename + " On machine " + self.machine + " timeout = " + str(self.timeout)
oai = openair('localdomain',self.machine)
oai.connect(user, self.password)
- cleanOldPrograms(oai, self.oldprogramList, self.CleanupAluLteBox)
+ cleanOldPrograms(oai, self.oldprogramList, self.CleanupAluLteBox, self.ExmimoRfStop)
logdir_local = os.environ.get('OPENAIR_DIR')
logdir_local_testcase = logdir_local +'/cmake_targets/autotests/log/'+ self.testcasename
logdir_local_base = logdir_local +'/cmake_targets/autotests/log/'
@@ -363,26 +378,30 @@ class testCaseThread_generic (threading.Thread):
#print "ThreadID = " + str(self.threadID) + "ThreadName: " + self.name + " testcasename: " + self.testcasename + "Execution Result = " + res
write_file(logfile_task_testcasename, cmd, mode="w")
#Now we copy all the remote files
- ssh = SSHSession(self.machine , username=user, key_file=None, password=self.password)
- ssh.get_all(logdir_remote_testcase , logdir_local_base)
+ #ssh = SSHSession(self.machine , username=user, key_file=None, password=self.password)
+ #ssh.get_all(logdir_remote_testcase , logdir_local_base)
+ SSHSessionWrapper(self.machine, user, None, self.password, logdir_remote_testcase, logdir_local_base)
print "Finishing test case : " + self.testcasename + " On machine " + self.machine
- cleanOldPrograms(oai, self.oldprogramList, self.CleanupAluLteBox)
+ cleanOldPrograms(oai, self.oldprogramList, self.CleanupAluLteBox, self.ExmimoRfStop)
#oai.kill(user,mypassword)
oai.disconnect()
except Exception, e:
error=''
error = error + ' In Class = testCaseThread_generic, function: ' + sys._getframe().f_code.co_name + ': *** Caught exception: ' + str(e.__class__) + " : " + str( e)
- error = error + '\n threadID = ' + str(self.threadID) + '\n threadName = ' + self.name + '\n testcasename = ' + self.testcasename + '\n machine = ' + self.machine + '\n logdirOAI5GRepo = ' + self.logdirOAI5GRepo + '\n' + '\n timeout = ' + str(timeout)
+ error = error + '\n threadID = ' + str(self.threadID) + '\n threadName = ' + self.name + '\n testcasename = ' + self.testcasename + '\n machine = ' + self.machine + '\n logdirOAI5GRepo = ' + self.logdirOAI5GRepo + '\n' + '\n timeout = ' + str(self.timeout)
error = error + traceback.format_exc()
print error
- sys.exit()
+ print "Continuing with next test case..."
+ #sys.exit()
+
+
def addsudo (cmd, password=""):
cmd = 'echo \'' + password + '\' | sudo -S -E bash -c \' ' + cmd + '\' '
return cmd
-def handle_testcaseclass_generic (testcasename, threadListGeneric, oldprogramList, logdirOAI5GRepo, MachineList, password, CleanupAluLteBox,timeout):
+def handle_testcaseclass_generic (testcasename, threadListGeneric, oldprogramList, logdirOAI5GRepo, MachineList, password, CleanupAluLteBox,timeout, ExmimoRfStop):
try:
mypassword=password
MachineListFree=[]
@@ -420,7 +439,7 @@ def handle_testcaseclass_generic (testcasename, threadListGeneric, oldprogramLis
print "MachineListBusy = " + ','.join(MachineListBusy)
print "MachineList = " + ','.join(MachineList)
machine = MachineListFree[0]
- thread = testCaseThread_generic(1,"Generic Thread_"+testcasename+"_"+ "machine_", machine, logdirOAI5GRepo, testcasename, oldprogramList, CleanupAluLteBox, password, timeout)
+ thread = testCaseThread_generic(1,"Generic Thread_"+testcasename+"_"+ "machine_", machine, logdirOAI5GRepo, testcasename, oldprogramList, CleanupAluLteBox, password, timeout, ExmimoRfStop)
param={"thread_id":thread, "Machine":machine, "testcasename":testcasename}
thread.start()
threadListNew.append(param)
@@ -431,26 +450,29 @@ def handle_testcaseclass_generic (testcasename, threadListGeneric, oldprogramLis
error = error + '\n testcasename = ' + testcasename + '\n logdirOAI5GRepo = ' + logdirOAI5GRepo + '\n MachineList = ' + ','.join(MachineList) + '\n timeout = ' + str(timeout) + '\n'
error = error + traceback.format_exc()
print error
- sys.exit(1)
+ print "Continuing..."
+ #sys.exit(1)
#Blocking wait for all threads related to generic testcase execution, class (compilation and execution)
def wait_testcaseclass_generic_threads(threadListGeneric, timeout = 1):
+ threadListGenericNew=[]
for param in threadListGeneric:
thread_id = param["thread_id"]
machine = param["Machine"]
testcasenameold = param["testcasename"]
thread_id.join(timeout)
if thread_id.isAlive() == True:
+ threadListGenericNew.append(param)
print "thread_id on machine: " + machine + " is still alive: testcasename: " + testcasenameold
print " Exiting now..."
sys.exit(1)
else:
print "thread_id on machine: " + machine + " is stopped: testcasename: " + testcasenameold
- threadListGeneric.remove(param)
- return threadListGeneric
+ #threadListGeneric.remove(param)
+ return threadListGenericNew
#Function to handle test case class : lte-softmodem
-def handle_testcaseclass_softmodem (testcase, oldprogramList, logdirOAI5GRepo , logdirOpenaircnRepo, MachineList, password, CleanUpAluLteBox):
+def handle_testcaseclass_softmodem (testcase, oldprogramList, logdirOAI5GRepo , logdirOpenaircnRepo, MachineList, password, CleanUpAluLteBox, ExmimoRfStop):
#We ignore the password sent to this function for secuirity reasons for password present in log files
#It is recommended to add a line in /etc/sudoers that looks something like below. The line below will run sudo without password prompt
# your_user_name ALL=(ALL:ALL) NOPASSWD: ALL
@@ -492,6 +514,7 @@ def handle_testcaseclass_softmodem (testcase, oldprogramList, logdirOAI5GRepo ,
UE_traffic_exec_args = testcase.findtext('UE_traffic_exec_args',default='')
UE_terminate_missing_procs = testcase.findtext('UE_terminate_missing_procs',default='True')
UE_search_expr_true = testcase.findtext('UE_search_expr_true','')
+ UE_stop_script = testcase.findtext('UE_stop_script','')
EPCMachine = testcase.findtext('EPC',default='')
EPC_config_file = testcase.findtext('EPC_config_file',default='')
@@ -514,16 +537,20 @@ def handle_testcaseclass_softmodem (testcase, oldprogramList, logdirOAI5GRepo ,
index_eNBMachine = MachineList.index(eNBMachine)
index_UEMachine = MachineList.index(UEMachine)
index_EPCMachine = MachineList.index(EPCMachine)
+ cmd = 'cd ' + logdirOAI5GRepo + '; source oaienv ; env|grep OPENAIR'
oai_eNB = openair('localdomain', eNBMachine)
oai_eNB.connect(user, password)
+ res= oai_eNB.send_recv(cmd)
oai_UE = openair('localdomain', UEMachine)
oai_UE.connect(user, password)
+ res = oai_eNB.send_recv(cmd)
oai_EPC = openair('localdomain', EPCMachine)
oai_EPC.connect(user, password)
+ res = oai_eNB.send_recv(cmd)
- cleanOldPrograms(oai_eNB, oldprogramList, CleanUpAluLteBox)
- cleanOldPrograms(oai_UE, oldprogramList, CleanUpAluLteBox)
- cleanOldPrograms(oai_EPC, oldprogramList, CleanUpAluLteBox)
+ cleanOldPrograms(oai_eNB, oldprogramList, CleanUpAluLteBox, ExmimoRfStop)
+ cleanOldPrograms(oai_UE, oldprogramList, CleanUpAluLteBox, ExmimoRfStop)
+ cleanOldPrograms(oai_EPC, oldprogramList, CleanUpAluLteBox, ExmimoRfStop)
logdir_eNB = logdirOAI5GRepo+'/cmake_targets/autotests/log/'+ testcasename
logdir_UE = logdirOAI5GRepo+'/cmake_targets/autotests/log/'+ testcasename
logdir_EPC = logdirOpenaircnRepo+'/TEST/autotests/log/'+ testcasename
@@ -573,6 +600,7 @@ def handle_testcaseclass_softmodem (testcase, oldprogramList, logdirOAI5GRepo ,
logfile_task_eNB_compile = logdir_local_testcase + '/eNB_task_compile' + '_' + str(run) + '_.log'
logfile_task_eNB_out = logdir_eNB + '/eNB_task_out' + '_' + str(run) + '_.log'
logfile_task_eNB = logdir_local_testcase + '/eNB_task' + '_' + str(run) + '_.log'
+ logfile_local_traffic_eNB_out = logdir_local_testcase + '/eNB_traffic' + '_' + str(run) + '_.log'
task_eNB_compile = ' ( uname -a ; date \n'
task_eNB_compile = task_eNB_compile + 'cd ' + logdirOAI5GRepo + ' ; source oaienv ; source cmake_targets/tools/build_helper \n'
@@ -613,6 +641,7 @@ def handle_testcaseclass_softmodem (testcase, oldprogramList, logdirOAI5GRepo ,
logfile_task_UE = logdir_local_testcase + '/UE_task' + '_' + str(run) + '_.log'
logfile_task_UE_compile_out = logdir_UE + '/UE_task_compile_out' + '_' + str(run) + '_.log'
logfile_task_UE_compile = logdir_local_testcase + '/UE_task_compile' + '_' + str(run) + '_.log'
+ logfile_local_traffic_UE_out = logdir_local_testcase + '/UE_traffic' + '_' + str(run) + '_.log'
task_UE_compile = ' ( uname -a ; date \n'
task_UE_compile = task_UE_compile + 'array_exec_pid=()' + '\n'
@@ -660,6 +689,7 @@ def handle_testcaseclass_softmodem (testcase, oldprogramList, logdirOAI5GRepo ,
logfile_task_EPC = logdir_local_testcase + '/EPC_task' + '_' + str(run) + '_.log'
logfile_task_EPC_compile_out = logdir_EPC + '/EPC_task_compile_out' + '_' + str(run) + '_.log'
logfile_task_EPC_compile = logdir_local_testcase + '/EPC_task_compile' + '_' + str(run) + '_.log'
+ logfile_local_traffic_EPC_out = logdir_local_testcase + '/EPC_traffic' + '_' + str(run) + '_.log'
task_EPC_compile = ' ( uname -a ; date \n'
task_EPC_compile = task_EPC_compile + 'array_exec_pid=()' + '\n'
@@ -734,34 +764,59 @@ def handle_testcaseclass_softmodem (testcase, oldprogramList, logdirOAI5GRepo ,
t.join()
#Now we get the log files from remote machines on the local machine
- cleanOldPrograms(oai_eNB, oldprogramList, CleanUpAluLteBox)
- cleanOldPrograms(oai_UE, oldprogramList, CleanUpAluLteBox)
- cleanOldPrograms(oai_EPC, oldprogramList, CleanUpAluLteBox)
+ cleanOldPrograms(oai_eNB, oldprogramList, CleanUpAluLteBox, ExmimoRfStop)
+ cleanOldPrograms(oai_UE, oldprogramList, CleanUpAluLteBox, ExmimoRfStop)
+ cleanOldPrograms(oai_EPC, oldprogramList, CleanUpAluLteBox, ExmimoRfStop)
+ logfile_UE_stop_script_out = logdir_UE + '/UE_stop_script_out' + '_' + str(run) + '_.log'
+ logfile_UE_stop_script = logdir_local_testcase + '/UE_stop_script' + '_' + str(run) + '_.log'
+
+ if UE_stop_script != "":
+ cmd = ' ( uname -a ; date \n'
+ cmd = cmd + 'cd ' + logdirOAI5GRepo + ' ; source oaienv ; source cmake_targets/tools/build_helper \n'
+ cmd = cmd + 'env |grep OPENAIR \n' + 'array_exec_pid=() \n'
+ cmd = cmd + UE_stop_script + '\n'
+ cmd = cmd + ') > ' + logfile_UE_stop_script_out + ' 2>&1 '
+ write_file(logfile_UE_stop_script , cmd, mode="w")
+ thread_UE = oaiThread(4, "UE_thread", UEMachine, user, password , cmd, False, timeout_thread)
+ thread_UE.start()
+ thread_UE.join()
+
print "Copying files from EPCMachine : " + EPCMachine + "logdir_EPC = " + logdir_EPC
- ssh = SSHSession(EPCMachine , username=user, key_file=None, password=password)
- ssh.get_all(logdir_EPC , logdir_local + '/cmake_targets/autotests/log/'+ testcasename)
+ #ssh = SSHSession(EPCMachine , username=user, key_file=None, password=password)
+ #ssh.get_all(logdir_EPC , logdir_local + '/cmake_targets/autotests/log/'+ testcasename)
+ SSHSessionWrapper(EPCMachine, user, None, password, logdir_EPC, logdir_local + '/cmake_targets/autotests/log/'+ testcasename)
print "Copying files from eNBMachine " + eNBMachine + "logdir_eNB = " + logdir_eNB
- ssh = SSHSession(eNBMachine , username=user, key_file=None, password=password)
- ssh.get_all(logdir_eNB, logdir_local + '/cmake_targets/autotests/log/'+ testcasename)
+ #ssh = SSHSession(eNBMachine , username=user, key_file=None, password=password)
+ #ssh.get_all(logdir_eNB, logdir_local + '/cmake_targets/autotests/log/'+ testcasename)
+ SSHSessionWrapper(eNBMachine, user, None, password, logdir_eNB, logdir_local + '/cmake_targets/autotests/log/'+ testcasename)
print "Copying files from UEMachine : " + UEMachine + "logdir_UE = " + logdir_UE
- ssh = SSHSession(UEMachine , username=user, key_file=None, password=password)
- ssh.get_all(logdir_UE , logdir_local + '/cmake_targets/autotests/log/'+ testcasename)
+ #ssh = SSHSession(UEMachine , username=user, key_file=None, password=password)
+ #ssh.get_all(logdir_UE , logdir_local + '/cmake_targets/autotests/log/'+ testcasename)
+ SSHSessionWrapper(UEMachine, user, None, password, logdir_UE, logdir_local + '/cmake_targets/autotests/log/'+ testcasename)
+
+
#Currently we only perform throughput tests
- result = tput_test_search_expr(eNB_search_expr_true, logfile_traffic_eNB)
+ tput_run_string=''
+ result, tput_string = tput_test_search_expr(eNB_search_expr_true, logfile_local_traffic_eNB_out)
+ tput_run_string = tput_run_string + tput_string
run_result=run_result&result
- result = tput_test_search_expr(EPC_search_expr_true, logfile_traffic_EPC)
+ result, tput_string = tput_test_search_expr(EPC_search_expr_true, logfile_local_traffic_EPC_out)
run_result=run_result&result
- result = tput_test_search_expr(UE_search_expr_true, logfile_traffic_UE)
+ tput_run_string = tput_run_string + tput_string
+ result, tput_string = tput_test_search_expr(UE_search_expr_true, logfile_local_traffic_UE_out)
run_result=run_result&result
+ tput_run_string = tput_run_string + tput_string
if run_result == 1:
- run_result_string = 'RUN_'+str(run) + ' = PASS'
+ run_result_string = ' RUN_'+str(run) + ' = PASS'
else:
- run_result_string = 'RUN_'+str(run) + ' = FAIL'
+ run_result_string = ' RUN_'+str(run) + ' = FAIL'
+
+ run_result_string = run_result_string + tput_run_string
test_result=test_result & run_result
test_result_string=test_result_string + run_result_string
@@ -775,28 +830,43 @@ def handle_testcaseclass_softmodem (testcase, oldprogramList, logdirOAI5GRepo ,
#Now we finalize the xml file of the test case
end_time=time.time()
duration= end_time - start_time
- xmlFile = logdir_local + '/cmake_targets/autotests/log/'+ testcasename + 'test.' + testcasename + '.xml'
+ xmlFile = logdir_local + '/cmake_targets/autotests/log/'+ testcasename + '/test.' + testcasename + '.xml'
if test_result ==0:
result='FAIL'
else:
result = 'PASS'
- xml=""
+ xml="\n \n"
write_file(xmlFile, xml, mode="w")
#This function searches if test case is present in list of test cases that need to be executed by user
-def search_test_case_group(testcasename, testcasegroup):
+def search_test_case_group(testcasename, testcasegroup, test_case_exclude):
+
+ if test_case_exclude != "":
+ testcase_exclusion_list=test_case_exclude.split()
+ for entry in testcase_exclusion_list:
+ if entry.find('+') >=0:
+ match = re.search(entry, testcasename)
+ if match:
+ print "\nSkipping test case as it is found in black list: " + testcasename
+ return False
+ else:
+ match = entry.find(testcasename)
+ if match >=0:
+ print "\nSkipping test case as it is found in black list: " + testcasename
+ return False
if testcasegroup == '':
- return True
- testcaselist = testcasegroup.split()
- for entry in testcaselist:
- if entry.find('+') >=0:
- match = re.search(entry, testcasename)
- if match:
- return True
- else:
- match = testcasename.find(entry)
- if match >=0:
+ return True
+ else:
+ testcaselist = testcasegroup.split()
+ for entry in testcaselist:
+ if entry.find('+') >=0:
+ match = re.search(entry, testcasename)
+ if match:
+ return True
+ else:
+ match = testcasename.find(entry)
+ if match >=0:
return True
return False
@@ -858,7 +928,8 @@ while i < len (sys.argv):
print "-d: low debug level"
print "-dd: high debug level"
print "-p: set the prompt"
- print "-r: Remove the log directory in autotests/"
+ print "-r: Remove the log directory in autotests"
+ print "-g: Run test cases in a group"
print "-w: set the password for ssh to localhost"
print "-l: use local shell instead of ssh connection"
print "-t: set the time out in second for commands"
@@ -925,6 +996,8 @@ CleanUpOldProgs = xmlRoot.findtext('CleanUpOldProgs',default='')
CleanUpAluLteBox = xmlRoot.findtext('CleanUpAluLteBox',default='')
Timeout_execution = int (xmlRoot.findtext('Timeout_execution'))
MachineListGeneric = xmlRoot.findtext('MachineListGeneric',default='')
+TestCaseExclusionList = xmlRoot.findtext('TestCaseExclusionList',default='')
+ExmimoRfStop = xmlRoot.findtext('ExmimoRfStop',default='')
print "MachineList = " + MachineList
print "GitOpenair-cnRepo = " + GitOpenaircnRepo
print "GitOAI5GRepo = " + GitOAI5GRepo
@@ -989,7 +1062,7 @@ if localshell == 0:
print "Sudo permissions..." + result
print '\nCleaning Older running programs : ' + CleanUpOldProgs
- cleanOldPrograms(oai_list[index], CleanUpOldProgs, CleanUpAluLteBox)
+ cleanOldPrograms(oai_list[index], CleanUpOldProgs, CleanUpAluLteBox, ExmimoRfStop)
result = oai_list[index].send('mount ' + NFSResultsDir, True)
print "Mounting NFS Share " + NFSResultsDir + "..." + result
@@ -1054,6 +1127,7 @@ for index in oai_list:
#cmd = cmd + 'rm -fR ' + logdir + '\n'
#cmd = cmd + 'mkdir -p ' + logdir + '\n'
cmd = cmd + 'cd '+ logdir + '\n'
+ cmd = cmd + 'git config --global http.sslVerify false \n'
cmd = cmd + 'git clone '+ GitOAI5GRepo + '\n'
cmd = cmd + 'git clone '+ GitOpenaircnRepo + '\n'
cmd = cmd + 'cd ' + logdirOAI5GRepo + '\n'
@@ -1132,6 +1206,10 @@ for t in threads_init_setup:
sftp_log = os.path.expandvars(locallogdir + '/sftp_module.log')
sftp_module (user, pw, MachineList[index], port, paramList, sftp_log)
index = index+1
+
+ if os.path.exists(localfile) == 0:
+ print "Setup log file <" + localfile + "> missing for machine <" + MachineList[index] + ">. Please check the setup log files. Exiting now"
+ sys.exit(1)
#Now we process all the test cases
#Now we check if there was error in setup files
@@ -1139,7 +1217,7 @@ for t in threads_init_setup:
status, out = commands.getstatusoutput('grep ' + ' -il \'error\' ' + locallogdir + '/setup*')
if (out != '') :
print "There is error in setup of machines"
- print "status = " + str(status) + "\n out = " + out
+ print "status = " + str(status) + "\n Check files for error = " + out
print sys.exit(1)
@@ -1152,7 +1230,7 @@ for testcase in testcaseList:
testcaseclass = testcase.findtext('class',default='')
desc = testcase.findtext('desc',default='')
#print "Machine list top level = " + ','.join(MachineList)
- if search_test_case_group(testcasename, testcasegroup) == True:
+ if search_test_case_group(testcasename, testcasegroup, TestCaseExclusionList) == True:
if testcaseclass == 'lte-softmodem' :
eNBMachine = testcase.findtext('eNB',default='')
UEMachine = testcase.findtext('UE',default='')
@@ -1165,11 +1243,11 @@ for testcase in testcaseList:
print "eNBMachine : " + eNBMachine + "UEMachine : " + UEMachine + "EPCMachine : " + EPCMachine + "MachineList : " + ','.join(MachineList)
print "testcasename = " + testcasename + " class = " + testcaseclass
threadListGlobal = wait_testcaseclass_generic_threads(threadListGlobal, Timeout_execution)
- handle_testcaseclass_softmodem (testcase, CleanUpOldProgs, logdirOAI5GRepo, logdirOpenaircnRepo, MachineList, pw, CleanUpAluLteBox )
+ handle_testcaseclass_softmodem (testcase, CleanUpOldProgs, logdirOAI5GRepo, logdirOpenaircnRepo, MachineList, pw, CleanUpAluLteBox, ExmimoRfStop )
elif (testcaseclass == 'compilation'):
- threadListGlobal = handle_testcaseclass_generic (testcasename, threadListGlobal, CleanUpOldProgs, logdirOAI5GRepo, MachineListGeneric, pw, CleanUpAluLteBox,Timeout_execution)
+ threadListGlobal = handle_testcaseclass_generic (testcasename, threadListGlobal, CleanUpOldProgs, logdirOAI5GRepo, MachineListGeneric, pw, CleanUpAluLteBox,Timeout_execution, ExmimoRfStop)
elif (testcaseclass == 'execution'):
- threadListGlobal = handle_testcaseclass_generic (testcasename, threadListGlobal, CleanUpOldProgs, logdirOAI5GRepo, MachineListGeneric, pw, CleanUpAluLteBox,Timeout_execution)
+ threadListGlobal = handle_testcaseclass_generic (testcasename, threadListGlobal, CleanUpOldProgs, logdirOAI5GRepo, MachineListGeneric, pw, CleanUpAluLteBox,ExmimoRfStop)
else :
print "Unknown test case class: " + testcaseclass
sys.exit()
@@ -1180,7 +1258,8 @@ for testcase in testcaseList:
error = error + '\n testcasename = ' + testcasename + '\n testcaseclass = ' + testcaseclass + '\n desc = ' + 'desc' + '\n'
error = error + traceback.format_exc()
print error
- sys.exit(1)
+ print "Continuing to next test case..."
+ #sys.exit(1)
print "Exiting the test cases execution now..."
diff --git a/cmake_targets/autotests/test_case_list.xml b/cmake_targets/autotests/test_case_list.xml
index 94dc3a35ff..ba34085d90 100644
--- a/cmake_targets/autotests/test_case_list.xml
+++ b/cmake_targets/autotests/test_case_list.xml
@@ -4,18 +4,20 @@
/mnt/sradio/TEST_RESULTS
https://gitlab.eurecom.fr/oai/openairinterface5g.git
https://gitlab.eurecom.fr/oai/openair-cn.git
- feature-34-test_framework
+ enhancement-57-UHD-interfacing
feature-17-test_framework
- oaisim* oaisim_nos1* lte-softmodem* lte-softmodem-nos1* mme_gw* run_epc* run_hss* iperf* hss hss_sim configure_cots_bandrich_ue* wvdial* run_exec_autotests*
+ oaisim* oaisim_nos1* lte-softmodem* lte-softmodem-nos1* mme_gw* run_epc* run_hss* iperf* hss hss_sim configure_cots_bandrich_ue* wvdial* run_exec_autotests* iperf
/opt/ltebox/tools/stop_ltebox
- 1800
+cd $OPENAIR_DIR/cmake_targets/autotests/tools/exmimo; sudo -E -S octave ./exmimo_stop.m
+ 36000
+ 0104+ 015502 015505 015506 015507 015508 015508 015509 015510 015511 015600 015700 016102 016105
calisson stevens mozart nano amerique
compilation
Build oaisim.Rel8
$OPENAIR_DIR/cmake_targets/build_oai
- --oaisim -r Rel8
+ --oaisim -r Rel8 -c
$OPENAIR_DIR/cmake_targets/oaisim_build_oai/build/oaisim
$OPENAIR_DIR/cmake_targets/at_commands/build/at_nas_ue
$OPENAIR_DIR/cmake_targets/nas_sim_tools/build/usim
@@ -35,7 +37,7 @@
Build oaisim.Rel10
$OPENAIR_DIR/cmake_targets/build_oai
- --oaisim -r Rel10
+ --oaisim -r Rel10 -c
$OPENAIR_DIR/cmake_targets/oaisim_build_oai/build/oaisim
$OPENAIR_DIR/cmake_targets/at_commands/build/at_nas_ue
$OPENAIR_DIR/cmake_targets/nas_sim_tools/build/usim
@@ -55,7 +57,7 @@
Build oaisim_noS1.Rel10
$OPENAIR_DIR/cmake_targets/build_oai
- --oaisim -r Rel10 --noS1
+ --oaisim -r Rel10 --noS1 -c
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/rb_tool
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko
@@ -75,7 +77,7 @@
Build lte_softmodem_noS1.USRP.Rel10
$OPENAIR_DIR/cmake_targets/build_oai
- --eNB -w USRP -r Rel10 --noS1
+ --eNB -w USRP -r Rel10 --noS1 -c
$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1
$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/rb_tool
$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko
@@ -94,7 +96,7 @@
Build lte_softmodem_noS1.EXMIMO.Rel10
$OPENAIR_DIR/cmake_targets/build_oai
- --eNB -w EXMIMO -r Rel10 --noS1
+ --eNB -w EXMIMO -r Rel10 --noS1 -c
$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1
$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/rb_tool
$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko
@@ -116,7 +118,7 @@
Build lte_softmodem_noS1.BLADERF.Rel10
$OPENAIR_DIR/cmake_targets/build_oai
- --eNB -w BLADERF -r Rel10 --noS1
+ --eNB -w BLADERF -r Rel10 --noS1 -c
$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1
$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/rb_tool
$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko
@@ -135,7 +137,7 @@
Build lte_softmodem_noS1.ETHERNET.Rel10
$OPENAIR_DIR/cmake_targets/build_oai
- --eNB -w ETHERNET -r Rel10 --noS1
+ --eNB -w ETHERNET -r Rel10 --noS1 -c
$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1
$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/rb_tool
$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko
@@ -156,7 +158,7 @@
Build lte_softmodem.USRP.Rel10
$OPENAIR_DIR/cmake_targets/build_oai
- --eNB -w USRP -r Rel10
+ --eNB -w USRP -r Rel10 -c
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
@@ -173,7 +175,7 @@
Build lte_softmodem.EXMIMO.Rel10
$OPENAIR_DIR/cmake_targets/build_oai
- --eNB -w EXMIMO -r Rel10
+ --eNB -w EXMIMO -r Rel10 -c
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/CMakeFiles/openair_rf/openair_rf.ko
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/updatefw
@@ -184,7 +186,7 @@
- lte-softmodemEXMIMO.Rel10
+ lte-softmodem.EXMIMO.Rel10
1
@@ -193,7 +195,7 @@
Build lte_softmodem.BLADERF.Rel10
$OPENAIR_DIR/cmake_targets/build_oai
- --eNB -w BLADERF -r Rel10
+ --eNB -w BLADERF -r Rel10 -c
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
@@ -201,7 +203,7 @@
- lte-softmodem.EXMIMO.Rel10
+ lte-softmodem.BLADERF.Rel10
1
@@ -210,7 +212,7 @@
Build lte_softmodem.ETHERNET.Rel10
$OPENAIR_DIR/cmake_targets/build_oai
- --eNB -w ETHERNET -r Rel10
+ --eNB -w ETHERNET -r Rel10 -c
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
@@ -227,7 +229,7 @@
Build phy unitary simulators + secuirity unitary tests
$OPENAIR_DIR/cmake_targets/build_oai
- --phy_simulators --core_simulators
+ --phy_simulators --core_simulators -c
$OPENAIR_DIR/cmake_targets/lte-simulators/build/dlsim
$OPENAIR_DIR/cmake_targets/lte-simulators/build/ulsim
$OPENAIR_DIR/cmake_targets/lte-simulators/build/pucchsim
@@ -261,7 +263,7 @@
Build RRH Gateway
$OPENAIR_DIR/cmake_targets/build_oai
- --RRH -w USRP
+ --RRH -w USRP -c
$OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw
@@ -278,7 +280,7 @@
Build RRH Gateway
$OPENAIR_DIR/cmake_targets/build_oai
- --RRH -w EXMIMO
+ --RRH -w EXMIMO -c
$OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw
$OPENAIR_DIR/cmake_targets/rrh_gw/build/CMakeFiles/openair_rf/openair_rf.ko
$OPENAIR_DIR/cmake_targets/rrh_gw/build/updatefw
@@ -298,7 +300,7 @@
Build RRH Gateway
$OPENAIR_DIR/cmake_targets/build_oai
- --RRH -w BLADERF
+ --RRH -w BLADERF -c
$OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw
@@ -313,10 +315,10 @@
execution
- Run OAISIM Rel10 TDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2,5,6) and search for errors, segmentation fault or exit
+ Run OAISIM Rel10 TDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2) and search for errors, segmentation fault or exit
$OPENAIR_DIR/cmake_targets/build_oai
- --oaisim --noS1
+ --oaisim --noS1 -c
$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
@@ -325,14 +327,8 @@
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 1
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 2
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 2
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 2
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 5
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 5
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 5
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 6
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 6
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 6
- oaisim_noS1.tdd.5MHz.TM1 oaisim_noS1.tdd.10MHz.TM1 oaisim_noS1.tdd.20MHz.TM1 oaisim_noS1.tdd.5MHz.TM2 oaisim_noS1.tdd.10MHz.TM2 oaisim_noS1.tdd.20MHz.TM2 oaisim_noS1.tdd.5MHz.TM5 oaisim_noS1.tdd.10MHz.TM5 oaisim_noS1.tdd.20MHz.TM5 oaisim_noS1.tdd.5MHz.TM6 oaisim_noS1.tdd.10MHz.TM6 oaisim_noS1.tdd.20MHz.TM6
+ -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 2
+ oaisim_noS1.tdd.5MHz.TM1 oaisim_noS1.tdd.10MHz.TM1 oaisim_noS1.tdd.20MHz.TM1 oaisim_noS1.tdd.5MHz.TM2 oaisim_noS1.tdd.10MHz.TM2 oaisim_noS1.tdd.20MHz.TM2
"Received RRCConnectionReconfigurationComplete from UE 0"
segmentation fault|assertion|exiting|fatal
3
@@ -340,10 +336,10 @@
execution
- Run OAISIM Rel10 TDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2,5,6) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit
+ Run OAISIM Rel10 TDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit
$OPENAIR_DIR/cmake_targets/build_oai
- --oaisim --noS1
+ --oaisim --noS1 -c
$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
@@ -352,14 +348,8 @@
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 1 -a
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 2 -a
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 2 -a
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 2 -a
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 5 -a
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 5 -a
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 5 -a
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 6 -a
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 6 -a
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 6 -a
- oaisim_noS1.tdd.5MHz.TM1 oaisim_noS1.tdd.10MHz.TM1 oaisim_noS1.tdd.20MHz.TM1 oaisim_noS1.tdd.5MHz.TM2 oaisim_noS1.tdd.10MHz.TM2 oaisim_noS1.tdd.20MHz.TM2 oaisim_noS1.tdd.5MHz.TM5 oaisim_noS1.tdd.10MHz.TM5 oaisim_noS1.tdd.20MHz.TM5 oaisim_noS1.tdd.5MHz.TM6 oaisim_noS1.tdd.10MHz.TM6 oaisim_noS1.tdd.20MHz.TM6
+ -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 2 -a
+ oaisim_noS1.tdd.5MHz.TM1 oaisim_noS1.tdd.10MHz.TM1 oaisim_noS1.tdd.20MHz.TM1 oaisim_noS1.tdd.5MHz.TM2 oaisim_noS1.tdd.10MHz.TM2 oaisim_noS1.tdd.20MHz.TM2
"Received RRCConnectionReconfigurationComplete from UE 0"
segmentation fault|assertion|exiting|fatal
3
@@ -367,10 +357,10 @@
execution
- Run OAISIM Rel10 TDD, 1 eNB + 3 UEs (5 MHz/10MHz/20MHz), (TM 1,2,5,6) and search for errors, segmentation fault or exit
+ Run OAISIM Rel10 TDD, 1 eNB + 3 UEs (5 MHz/10MHz/20MHz), (TM 1,2) and search for errors, segmentation fault or exit
$OPENAIR_DIR/cmake_targets/build_oai
- --oaisim --noS1
+ --oaisim --noS1 -c
$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
@@ -379,14 +369,8 @@
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 1
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 2
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 2
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 2
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 5
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 5
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 5
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 6
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 6
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 6
- oaisim_noS1.tdd.5MHz.TM1 oaisim_noS1.tdd.10MHz.TM1 oaisim_noS1.tdd.20MHz.TM1 oaisim_noS1.tdd.5MHz.TM2 oaisim_noS1.tdd.10MHz.TM2 oaisim_noS1.tdd.20MHz.TM2 oaisim_noS1.tdd.5MHz.TM5 oaisim_noS1.tdd.10MHz.TM5 oaisim_noS1.tdd.20MHz.TM5 oaisim_noS1.tdd.5MHz.TM6 oaisim_noS1.tdd.10MHz.TM6 oaisim_noS1.tdd.20MHz.TM6
+ -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 2
+ oaisim_noS1.tdd.5MHz.TM1 oaisim_noS1.tdd.10MHz.TM1 oaisim_noS1.tdd.20MHz.TM1 oaisim_noS1.tdd.5MHz.TM2 oaisim_noS1.tdd.10MHz.TM2 oaisim_noS1.tdd.20MHz.TM2
"Received RRCConnectionReconfigurationComplete from UE 0" "Received RRCConnectionReconfigurationComplete from UE 1" "Received RRCConnectionReconfigurationComplete from UE 2"
segmentation fault|assertion|exiting|fatal
3
@@ -397,7 +381,7 @@
Run OAISIM Rel10 TDD, 1 eNB + 3 UEs (5 MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit
$OPENAIR_DIR/cmake_targets/build_oai
- --oaisim --noS1
+ --oaisim --noS1 -c
$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
@@ -406,14 +390,8 @@
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 1 -a
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 2 -a
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 2 -a
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 2 -a
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 5 -a
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 5 -a
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 5 -a
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 6 -a
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 6 -a
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 6 -a
- oaisim_noS1.tdd.5MHz.TM1 oaisim_noS1.tdd.10MHz.TM1 oaisim_noS1.tdd.20MHz.TM1 oaisim_noS1.tdd.5MHz.TM2 oaisim_noS1.tdd.10MHz.TM2 tdd.20MHz.TM2 oaisim_noS1.tdd.5MHz.TM5 oaisim_noS1.tdd.10MHz.TM5 oaisim_noS1.tdd.20MHz.TM5 oaisim_noS1.tdd.5MHz.TM6 oaisim_noS1.tdd.10MHz.TM6 oaisim_noS1.tdd.20MHz.TM6
+ -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 2 -a
+ oaisim_noS1.tdd.5MHz.TM1 oaisim_noS1.tdd.10MHz.TM1 oaisim_noS1.tdd.20MHz.TM1 oaisim_noS1.tdd.5MHz.TM2 oaisim_noS1.tdd.10MHz.TM2 oaisim_nos1.tdd.20MHz.TM2
"Received RRCConnectionReconfigurationComplete from UE 0" "Received RRCConnectionReconfigurationComplete from UE 1" "Received RRCConnectionReconfigurationComplete from UE 2"
segmentation fault|assertion|exiting|fatal
3
@@ -424,7 +402,7 @@
Run OAI Rel10 TDD, 1 eNB + 1 UE (5 MHz) without abstraction mode, send ping from from eNB to UE, and check that there is no packet losses
$OPENAIR_DIR/cmake_targets/build_oai
- --oaisim --noS1
+ --oaisim --noS1 -c
$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
@@ -433,14 +411,8 @@
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 1 -c26
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 2 -c26
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 2 -c26
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 2 -c26
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 5 -c26
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 5 -c26
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 5 -c26
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 6 -c26
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 6 -c26
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 6 -c26
- oaisim_noS1.tdd.5MHz.TM1 oaisim_noS1.tdd.10MHz.TM1 oaisim_noS1.tdd.20MHz.TM1 oaisim_noS1.tdd.5MHz.TM2 oaisim_noS1.tdd.10MHz.TM2 oaisim_noS1.tdd.20MHz.TM2 oaisim_noS1.tdd.5MHz.TM5 oaisim_noS1.tdd.10MHz.TM5 oaisim_noS1.tdd.20MHz.TM5 oaisim_noS1.tdd.5MHz.TM6 oaisim_noS1.tdd.10MHz.TM6 oaisim_noS1.tdd.20MHz.TM6
+ -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 2 -c26
+ oaisim_noS1.tdd.5MHz.TM1 oaisim_noS1.tdd.10MHz.TM1 oaisim_noS1.tdd.20MHz.TM1 oaisim_noS1.tdd.5MHz.TM2 oaisim_noS1.tdd.10MHz.TM2 oaisim_noS1.tdd.20MHz.TM2
"DL and UL loss rate below 10"
segmentation fault|assertion|exiting|fatal
3
@@ -451,7 +423,7 @@
Run OAI Rel10 TDD, 1 eNB + 1 UE (5 MHz) in PHY_ABSTRACTION mode, send ping from from eNB to UE, and check that there is no packet losses
$OPENAIR_DIR/cmake_targets/build_oai
- --oaisim --noS1
+ --oaisim --noS1 -c
$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
@@ -460,14 +432,8 @@
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 1 -c26 -a
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 2 -c26 -a
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 2 -c26 -a
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 2 -c26 -a
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 5 -c26 -a
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 5 -c26 -a
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 5 -c26 -a
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 6 -c26 -a
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 6 -c26 -a
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 6 -c26 -a
- oaisim_noS1.tdd.5MHz.TM1 oaisim_noS1.tdd.10MHz.TM1 oaisim_noS1.tdd.20MHz.TM1 oaisim_noS1.tdd.5MHz.TM2 oaisim_noS1.tdd.10MHz.TM2 oaisim_noS1.tdd.20MHz.TM2 oaisim_noS1.tdd.5MHz.TM5 oaisim_noS1.tdd.10MHz.TM5 tdd.20MHz.TM5 oaisim_noS1.tdd.5MHz.TM6 oaisim_noS1.tdd.10MHz.TM6 oaisim_noS1.tdd.20MHz.TM6
+ -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 2 -c26 -a
+ oaisim_noS1.tdd.5MHz.TM1 oaisim_noS1.tdd.10MHz.TM1 oaisim_noS1.tdd.20MHz.TM1 oaisim_noS1.tdd.5MHz.TM2 oaisim_noS1.tdd.10MHz.TM2 oaisim_noS1.tdd.20MHz.TM2
"DL and UL loss rate below 10"
segmentation fault|assertion|exiting|fatal
3
@@ -475,10 +441,10 @@
execution
- Run OAISIM Rel10 FDD, 1 eNB + 1 UE 1 eNB (5 MHz/10MHz/20MHz), (TM 1,2,5,6) and search for errors, segmentation fault or exit
+ Run OAISIM Rel10 FDD, 1 eNB + 1 UE 1 eNB (5 MHz/10MHz/20MHz), (TM 1,2) and search for errors, segmentation fault or exit
$OPENAIR_DIR/cmake_targets/build_oai
- --oaisim --noS1
+ --oaisim --noS1 -c
$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
@@ -487,14 +453,8 @@
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 1 -F
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 2 -F
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 2 -F
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 2 -F
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 5 -F
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 5 -F
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 5 -F
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 6 -F
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 6 -F
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 6 -F
- oaisim_noS1.FDD.5MHz.TM1 oaisim_noS1.FDD.10MHz.TM1 oaisim_noS1.FDD.20MHz.TM1 oaisim_noS1.FDD.5MHz.TM2 oaisim_noS1.FDD.10MHz.TM2 oaisim_noS1.FDD.20MHz.TM2 oaisim_noS1.FDD.5MHz.TM5 oaisim_noS1.FDD.10MHz.TM5 oaisim_noS1.FDD.20MHz.TM5 oaisim_noS1.FDD.5MHz.TM6 oaisim_noS1.FDD.10MHz.TM6 oaisim_noS1.FDD.20MHz.TM6
+ -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 2 -F
+ oaisim_noS1.FDD.5MHz.TM1 oaisim_noS1.FDD.10MHz.TM1 oaisim_noS1.FDD.20MHz.TM1 oaisim_noS1.FDD.5MHz.TM2 oaisim_noS1.FDD.10MHz.TM2 oaisim_noS1.FDD.20MHz.TM2
"Received RRCConnectionReconfigurationComplete from UE 0"
segmentation fault|assertion|exiting|fatal
3
@@ -502,10 +462,10 @@
execution
- Run OAISIM Rel10 FDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2,5,6) in PHY_ABSTRACTION mode and search for errors
+ Run OAISIM Rel10 FDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2) in PHY_ABSTRACTION mode and search for errors
$OPENAIR_DIR/cmake_targets/build_oai
- --oaisim --noS1
+ --oaisim --noS1 -c
$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
@@ -514,14 +474,8 @@
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 1 -F -a
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 2 -F -a
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 2 -F -a
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 2 -F -a
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 5 -F -a
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 5 -F -a
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 5 -F -a
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 6 -F -a
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 6 -F -a
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 6 -F -a
- oaisim_noS1.FDD.5MHz.TM1 oaisim_noS1.FDD.10MHz.TM1 oaisim_noS1.FDD.20MHz.TM1 oaisim_noS1.FDD.5MHz.TM2 oaisim_noS1.FDD.10MHz.TM2 oaisim_noS1.FDD.20MHz.TM2 oaisim_noS1.FDD.5MHz.TM5 oaisim_noS1.FDD.10MHz.TM5 oaisim_noS1.FDD.20MHz.TM5 oaisim_noS1.FDD.5MHz.TM6 oaisim_noS1.FDD.10MHz.TM6 oaisim_noS1.FDD.20MHz.TM6
+ -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 2 -F -a
+ oaisim_noS1.FDD.5MHz.TM1 oaisim_noS1.FDD.10MHz.TM1 oaisim_noS1.FDD.20MHz.TM1 oaisim_noS1.FDD.5MHz.TM2 oaisim_noS1.FDD.10MHz.TM2 oaisim_noS1.FDD.20MHz.TM2
"Received RRCConnectionReconfigurationComplete from UE 0"
segmentation fault|assertion|exiting|fatal
3
@@ -529,10 +483,10 @@
execution
- Run OAISIM Rel10 FDD, 1 eNB + 3 UEs (5 MHz/10MHz/20MHz), (TM 1,2,5,6) and search for errors, segmentation fault or exit
+ Run OAISIM Rel10 FDD, 1 eNB + 3 UEs (5 MHz/10MHz/20MHz), (TM 1,2) and search for errors, segmentation fault or exit
$OPENAIR_DIR/cmake_targets/build_oai
- --oaisim --noS1
+ --oaisim --noS1 -c
$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
@@ -541,14 +495,8 @@
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 1 -F
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 2 -F
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 2 -F
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 2 -F
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 5 -F
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 5 -F
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 5 -F
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 6 -F
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 6 -F
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 6 -F
- oaisim_noS1.FDD.5MHz.TM1 oaisim_noS1.FDD.10MHz.TM1 oaisim_noS1.FDD.20MHz.TM1 oaisim_noS1.FDD.5MHz.TM2 oaisim_noS1.FDD.10MHz.TM2 oaisim_noS1.FDD.20MHz.TM2 oaisim_noS1.FDD.5MHz.TM5 oaisim_noS1.FDD.10MHz.TM5 oaisim_noS1.FDD.20MHz.TM5 oaisim_noS1.FDD.5MHz.TM6 oaisim_noS1.FDD.10MHz.TM6 oaisim_noS1.FDD.20MHz.TM6
+ -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 2 -F
+ oaisim_noS1.FDD.5MHz.TM1 oaisim_noS1.FDD.10MHz.TM1 oaisim_noS1.FDD.20MHz.TM1 oaisim_noS1.FDD.5MHz.TM2 oaisim_noS1.FDD.10MHz.TM2 oaisim_noS1.FDD.20MHz.TM2
"Received RRCConnectionReconfigurationComplete from UE 0" "Received RRCConnectionReconfigurationComplete from UE 1" "Received RRCConnectionReconfigurationComplete from UE 2"
segmentation fault|assertion|exiting|fatal
3
@@ -556,10 +504,10 @@
execution
- Run OAISIM Rel10 FDD, 1 eNB + 3 UEs (5 MHz/10MHz/20MHz), (TM 1,2,5,6) in PHY_ABSTRACTION mode and search for errors
+ Run OAISIM Rel10 FDD, 1 eNB + 3 UEs (5 MHz/10MHz/20MHz), (TM 1,2) in PHY_ABSTRACTION mode and search for errors
$OPENAIR_DIR/cmake_targets/build_oai
- --oaisim --noS1
+ --oaisim --noS1 -c
$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
@@ -568,14 +516,8 @@
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 1 -F -a
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 2 -F -a
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 2 -F -a
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 2 -F -a
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 5 -F -a
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 5 -F -a
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 5 -F -a
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -x 6 -F -a
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -x 6 -F -a
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 6 -F -a
- oaisim_noS1.FDD.5MHz.TM1 oaisim_noS1.FDD.10MHz.TM1 oaisim_noS1.FDD.20MHz.TM1 oaisim_noS1.FDD.5MHz.TM2 oaisim_noS1.FDD.10MHz.TM2 oaisim_noS1.FDD.20MHz.TM2 oaisim_noS1.FDD.5MHz.TM5 oaisim_noS1.FDD.10MHz.TM5 oaisim_noS1.FDD.20MHz.TM5 oaisim_noS1.FDD.5MHz.TM6 oaisim_noS1.FDD.10MHz.TM6 oaisim_noS1.FDD.20MHz.TM6
+ -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -x 2 -F -a
+ oaisim_noS1.FDD.5MHz.TM1 oaisim_noS1.FDD.10MHz.TM1 oaisim_noS1.FDD.20MHz.TM1 oaisim_noS1.FDD.5MHz.TM2 oaisim_noS1.FDD.10MHz.TM2 oaisim_noS1.FDD.20MHz.TM2
"Received RRCConnectionReconfigurationComplete from UE 0" "Received RRCConnectionReconfigurationComplete from UE 1" "Received RRCConnectionReconfigurationComplete from UE 2"
segmentation fault|assertion|exiting|fatal
3
@@ -583,10 +525,10 @@
execution
- Run OAI Rel10 FDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2,5,6) without PHY_ABSTRACTION mode, ping from from eNB to UE, and for check for no packet losses
+ Run OAI Rel10 FDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2) without PHY_ABSTRACTION mode, ping from from eNB to UE, and for check for no packet losses
$OPENAIR_DIR/cmake_targets/build_oai
- --oaisim --noS1
+ --oaisim --noS1 -c
$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
@@ -595,14 +537,8 @@
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 1 -F -c26
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 2 -F -c26
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 2 -F -c26
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 2 -F -c26
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 5 -F -c26
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 5 -F -c26
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 5 -F -c26
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 6 -F -c26
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 6 -F -c26
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 6 -F -c26
- oaisim_noS1.FDD.5MHz.TM1 oaisim_noS1.FDD.10MHz.TM1 oaisim_noS1.FDD.20MHz.TM1 oaisim_noS1.FDD.5MHz.TM2 oaisim_noS1.FDD.10MHz.TM2 oaisim_noS1.FDD.20MHz.TM2 oaisim_noS1.FDD.5MHz.TM5 oaisim_noS1.FDD.10MHz.TM5 oaisim_noS1.FDD.20MHz.TM5 oaisim_noS1.FDD.5MHz.TM6 oaisim_noS1.FDD.10MHz.TM6 oaisim_noS1.FDD.20MHz.TM6
+ -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 2 -F -c26
+ oaisim_noS1.FDD.5MHz.TM1 oaisim_noS1.FDD.10MHz.TM1 oaisim_noS1.FDD.20MHz.TM1 oaisim_noS1.FDD.5MHz.TM2 oaisim_noS1.FDD.10MHz.TM2 oaisim_noS1.FDD.20MHz.TM2
"DL and UL loss rate below 10"
segmentation fault|assertion|exiting|fatal
3
@@ -610,10 +546,10 @@
execution
- Run OAI Rel10 FDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2,5,6) in PHY_ABSTRACTION mode, send ping from from eNB to UE, and check for no packet losses
+ Run OAI Rel10 FDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2) in PHY_ABSTRACTION mode, send ping from from eNB to UE, and check for no packet losses
$OPENAIR_DIR/cmake_targets/build_oai
- --oaisim --noS1
+ --oaisim --noS1 -c
$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
@@ -622,14 +558,8 @@
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 1 -F -c26 -a
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 2 -F -c26 -a
-O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 2 -F -c26 -a
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 2 -F -c26 -a
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 5 -F -c26 -a
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 5 -F -c26 -a
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 5 -F -c26 -a
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -x 6 -F -c26 -a
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -x 6 -F -c26 -a
- -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 6 -F -c26 -a
- oaisim_noS1.FDD.5MHz.TM1 oaisim_noS1.FDD.10MHz.TM1 oaisim_noS1.FDD.20MHz.TM1 oaisim_noS1.FDD.5MHz.TM2 oaisim_noS1.FDD.10MHz.TM2 oaisim_noS1.FDD.20MHz.TM2 oaisim_noS1.FDD.5MHz.TM5 oaisim_noS1.FDD.10MHz.TM5 oaisim_noS1.FDD.20MHz.TM5 oaisim_noS1.FDD.5MHz.TM6 oaisim_noS1.FDD.10MHz.TM6 oaisim_noS1.FDD.20MHz.TM6
+ -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -x 2 -F -c26 -a
+ oaisim_noS1.FDD.5MHz.TM1 oaisim_noS1.FDD.10MHz.TM1 oaisim_noS1.FDD.20MHz.TM1 oaisim_noS1.FDD.5MHz.TM2 oaisim_noS1.FDD.10MHz.TM2 oaisim_noS1.FDD.20MHz.TM2
"DL and UL loss rate below 10"
segmentation fault|assertion|exiting|fatal
3
@@ -640,7 +570,7 @@
Check if eMBMS procedure is not finished completely, make sure that the SIB13/MCCH have been correclty received by UEs
$OPENAIR_DIR/cmake_targets/build_oai
- --oaisim --noS1
+ --oaisim --noS1 -c
$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
@@ -656,7 +586,7 @@
Check if eMBMS multicast/broadcast data is received, make sure that the SIB13/MCCH/MTCH have been correclty received by UEs
$OPENAIR_DIR/cmake_targets/build_oai
- --oaisim --noS1
+ --oaisim --noS1 -c
$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
@@ -672,7 +602,7 @@
Check for eMBMS multicast/broadcast data received in fdd mode, make sure that the SIB13/MCCH/MTCH have been correclty received by UEs
$OPENAIR_DIR/cmake_targets/build_oai
- --oaisim --noS1
+ --oaisim --noS1 -c
$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
@@ -688,7 +618,7 @@
Check for eMBMS multicast/broadcast DF relaying working properly in fdd mode, make sure that the SIB13/MCCH/MTCH have been correclty received by UEs
$OPENAIR_DIR/cmake_targets/build_oai
- --oaisim --noS1
+ --oaisim --noS1 -c
$OPENAIR_DIR/cmake_targets/tools/init_nas_nos1
$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
@@ -704,7 +634,7 @@
test_aes128_cmac_encrypt
$OPENAIR_DIR/cmake_targets/build_oai
- --core_simulators
+ --core_simulators -c
$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_aes128_cmac_encrypt
@@ -720,7 +650,7 @@
test_aes128_ctr_decrypt
$OPENAIR_DIR/cmake_targets/build_oai
- --core_simulators
+ --core_simulators -c
$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_aes128_ctr_decrypt
@@ -736,7 +666,7 @@
test_aes128_ctr_encrypt
$OPENAIR_DIR/cmake_targets/build_oai
- --core_simulators
+ --core_simulators -c
$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_aes128_ctr_encrypt
@@ -752,7 +682,7 @@
test_secu_kenb
$OPENAIR_DIR/cmake_targets/build_oai
- --core_simulators
+ --core_simulators -c
$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_kenb
@@ -768,7 +698,7 @@
test_secu_knas
$OPENAIR_DIR/cmake_targets/build_oai
- --core_simulators
+ --core_simulators -c
$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas
@@ -784,7 +714,7 @@
test_secu_knas_encrypt_eea1
$OPENAIR_DIR/cmake_targets/build_oai
- --core_simulators
+ --core_simulators -c
$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eea1
@@ -800,7 +730,7 @@
test_secu_knas_encrypt_eea2
$OPENAIR_DIR/cmake_targets/build_oai
- --core_simulators
+ --core_simulators -c
$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eea2
@@ -816,7 +746,7 @@
test_secu_knas_encrypt_eia1
$OPENAIR_DIR/cmake_targets/build_oai
- --core_simulators
+ --core_simulators -c
$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eia1
@@ -832,7 +762,7 @@
test_secu_knas_encrypt_eia2
$OPENAIR_DIR/cmake_targets/build_oai
- --core_simulators
+ --core_simulators -c
$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eia1
@@ -848,7 +778,7 @@
test_kdf
$OPENAIR_DIR/cmake_targets/build_oai
- --core_simulators
+ --core_simulators -c
$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_kdf
@@ -875,7 +805,7 @@
$OPENAIR_DIR/cmake_targets/build_oai
- --phy_simulators
+ --phy_simulators -c
$OPENAIR_DIR/cmake_targets/lte-simulators/build/dlsim
@@ -893,7 +823,7 @@
dlsim.test1 dlsim.test5 dlsim.test6 dlsim.test6b dlsim.test7 dlsim.test7b dlsim.test10 dlsim.test10b dlsim.test11 dlsim.TM2_test1 dlsim.TM2_test1b
"passed"
segmentation fault|assertion|exiting|fatal
- 1
+ 3
@@ -906,7 +836,7 @@
(Test 6, 20 MHz, FDD (MCS 16), AWGN, 12 dB (70%))
$OPENAIR_DIR/cmake_targets/build_oai
- --phy_simulators
+ --phy_simulators -c
$OPENAIR_DIR/cmake_targets/lte-simulators/build/ulsim
@@ -919,7 +849,7 @@
ulsim.test1 ulsim.test2 ulsim.test3 ulsim.test4 ulsim.test5 ulsim.test6
"passed"
segmentation fault|assertion|exiting|fatal
- 1
+ 3
@@ -928,7 +858,7 @@
calisson
stevens
amerique
- 180
+ 360
/tmp
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\"
@@ -937,7 +867,19 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 25
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 130
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
$OPENAIR_DIR/cmake_targets/build_oai
--eNB -w USRP -x -c
@@ -958,13 +900,14 @@
--eNB -w USRP -x -c
- sleep 30 ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
+ $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
- while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 3000 -B 192.172.0.2
+ while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 300 -B 192.172.0.2
True
+ sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
/tmp
BUILD/EPC/epc.local.enb.conf.in MCC \"208\"
@@ -985,14 +928,1866 @@
sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.1
- throughput_test min=0.0Mbits/sec max=0.0Mbits/sec average=0.0Mbits/sec duration=0.0s
+ throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec duration=300.0s
True
- USRP.ALU_EPC.Bandrich.5MHz.FDD.UL
- 3
+ USRPb210.ALU_EPC.Bandrich.5MHz.FDD.Band_7.UL.1TX.1RX
+ 10
+
+ lte-softmodem
+
+ calisson
+ stevens
+ amerique
+ 360
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 130
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+
+
+ $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
+ -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf
+
+
+
+
+ True
+
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
+
+ while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 300 -B 192.172.0.2
+
+
+
+ True
+ sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
+
+ /tmp
+ BUILD/EPC/epc.local.enb.conf.in MCC \"208\"
+ BUILD/EPC/epc.local.enb.conf.in MNC \"92\"
+ BUILD/EPC/epc.local.enb.conf.in TAC \"1\"
+ BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\"
+ BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\"
+ SCRIPTS/build_epc
+ -c -l
+ SCRIPTS/build_hss
+ -c -l
+
+
+
+ /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
+
+ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000
+
+ sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.1
+
+ throughput_test min=2.0Mbits/sec max=2.0Mbits/sec average=2.0Mbits/sec duration=300.0s
+
+ True
+ USRPb210.ALU_EPC.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX
+ 10
+
+
+
+ lte-softmodem
+
+ calisson
+ stevens
+ amerique
+ 360
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 100
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 130
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+
+
+ $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
+ -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf
+
+
+
+
+ True
+
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
+
+ while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 300 -B 192.172.0.2
+
+
+
+ True
+ sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
+
+ /tmp
+ BUILD/EPC/epc.local.enb.conf.in MCC \"208\"
+ BUILD/EPC/epc.local.enb.conf.in MNC \"92\"
+ BUILD/EPC/epc.local.enb.conf.in TAC \"1\"
+ BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\"
+ BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\"
+ SCRIPTS/build_epc
+ -c -l
+ SCRIPTS/build_hss
+ -c -l
+
+
+
+ /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
+
+ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000
+
+ sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.1
+
+ throughput_test min=4.0Mbits/sec max=4.0Mbits/sec average=4.0Mbits/sec duration=300.0s
+
+ True
+ USRPb210.ALU_EPC.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX
+ 10
+
+
+
+ lte-softmodem
+
+ calisson
+ stevens
+ amerique
+ 360
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 25
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 130
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+
+
+ $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
+ -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf
+
+
+
+
+ True
+
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
+
+ while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.2
+
+ True
+ sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
+ throughput_test min=4.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec duration=60.0s
+
+
+ /tmp
+ BUILD/EPC/epc.local.enb.conf.in MCC \"208\"
+ BUILD/EPC/epc.local.enb.conf.in MNC \"92\"
+ BUILD/EPC/epc.local.enb.conf.in TAC \"1\"
+ BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\"
+ BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\"
+ SCRIPTS/build_epc
+ -c -l
+ SCRIPTS/build_hss
+ -c -l
+
+
+
+ /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
+
+ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000
+
+ sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 300 -B 192.172.0.1
+
+
+ True
+ USRPb210.ALU_EPC.Bandrich.5MHz.FDD.Band_7.DL.1TX.1RX
+ 10
+
+
+
+ lte-softmodem
+
+ calisson
+ stevens
+ amerique
+ 360
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 130
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+
+
+ $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
+ -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf
+
+
+
+
+ True
+
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
+
+ while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.2
+
+ throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec duration=300.0s
+
+ True
+ sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
+
+
+ /tmp
+ BUILD/EPC/epc.local.enb.conf.in MCC \"208\"
+ BUILD/EPC/epc.local.enb.conf.in MNC \"92\"
+ BUILD/EPC/epc.local.enb.conf.in TAC \"1\"
+ BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\"
+ BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\"
+ SCRIPTS/build_epc
+ -c -l
+ SCRIPTS/build_hss
+ -c -l
+
+
+
+ /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
+
+ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000
+
+ sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 300 -B 192.172.0.1
+
+
+ True
+ USRPb210.ALU_EPC.Bandrich.10MHz.FDD.Band_7.DL.1TX.1RX
+ 10
+
+
+
+ lte-softmodem
+
+ calisson
+ stevens
+ amerique
+ 360
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 100
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 130
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+
+
+ $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
+ -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf
+
+
+
+
+ True
+
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
+
+ while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.2
+
+ throughput_test min=15.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec duration=300.0s
+
+ True
+ sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
+
+
+ /tmp
+ BUILD/EPC/epc.local.enb.conf.in MCC \"208\"
+ BUILD/EPC/epc.local.enb.conf.in MNC \"92\"
+ BUILD/EPC/epc.local.enb.conf.in TAC \"1\"
+ BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\"
+ BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\"
+ SCRIPTS/build_epc
+ -c -l
+ SCRIPTS/build_hss
+ -c -l
+
+
+
+ /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
+
+ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000
+
+ sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 300 -B 192.172.0.1
+
+
+ True
+ USRPb210.ALU_EPC.Bandrich.20MHz.FDD.Band_7.DL.1TX.1RX
+ 10
+
+
+
+
+ lte-softmodem
+
+ calisson
+ stevens
+ amerique
+ 360
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 25
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 130
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 2
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 2
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+
+
+ $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
+ -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf
+
+
+
+
+ True
+
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
+
+ while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 300 -B 192.172.0.2
+
+
+
+ True
+ sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
+
+ /tmp
+ BUILD/EPC/epc.local.enb.conf.in MCC \"208\"
+ BUILD/EPC/epc.local.enb.conf.in MNC \"92\"
+ BUILD/EPC/epc.local.enb.conf.in TAC \"1\"
+ BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\"
+ BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\"
+ SCRIPTS/build_epc
+ -c -l
+ SCRIPTS/build_hss
+ -c -l
+
+
+
+ /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
+
+ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000
+
+ sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.1
+
+ throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec duration=300.0s
+
+ True
+ USRPb210.ALU_EPC.Bandrich.5MHz.FDD.Band_7.UL.2TX.2RX
+ 10
+
+
+
+
+ lte-softmodem
+
+ calisson
+ stevens
+ amerique
+ 360
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 130
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 2
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 2
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+
+
+ $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
+ -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf
+
+
+
+
+ True
+
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
+
+ while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 300 -B 192.172.0.2
+
+
+
+ True
+ sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
+
+ /tmp
+ BUILD/EPC/epc.local.enb.conf.in MCC \"208\"
+ BUILD/EPC/epc.local.enb.conf.in MNC \"92\"
+ BUILD/EPC/epc.local.enb.conf.in TAC \"1\"
+ BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\"
+ BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\"
+ SCRIPTS/build_epc
+ -c -l
+ SCRIPTS/build_hss
+ -c -l
+
+
+
+ /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
+
+ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000
+
+ sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.1
+
+ throughput_test min=2.0Mbits/sec max=2.0Mbits/sec average=2.0Mbits/sec duration=300.0s
+
+ True
+ USRPb210.ALU_EPC.Bandrich.10MHz.FDD.Band_7.UL.2TX.2RX
+ 10
+
+
+
+ lte-softmodem
+
+ calisson
+ stevens
+ amerique
+ 360
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 100
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 130
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 2
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 2
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+
+
+ $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
+ -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf
+
+
+
+
+ True
+
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
+
+ while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 300 -B 192.172.0.2
+
+
+
+ True
+ sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
+
+ /tmp
+ BUILD/EPC/epc.local.enb.conf.in MCC \"208\"
+ BUILD/EPC/epc.local.enb.conf.in MNC \"92\"
+ BUILD/EPC/epc.local.enb.conf.in TAC \"1\"
+ BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\"
+ BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\"
+ SCRIPTS/build_epc
+ -c -l
+ SCRIPTS/build_hss
+ -c -l
+
+
+
+ /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
+
+ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000
+
+ sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.1
+
+ throughput_test min=4.0Mbits/sec max=4.0Mbits/sec average=4.0Mbits/sec duration=300.0s
+
+ True
+ USRPb210.ALU_EPC.Bandrich.20MHz.FDD.Band_7.UL.2TX.2RX
+ 10
+
+
+
+ lte-softmodem
+
+ calisson
+ stevens
+ amerique
+ 360
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 25
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 130
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 2
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 2
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+
+
+ $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
+ -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf
+
+
+
+
+ True
+
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
+
+ while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.2
+
+ throughput_test min=4.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec duration=300.0s
+
+ True
+ sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
+
+
+ /tmp
+ BUILD/EPC/epc.local.enb.conf.in MCC \"208\"
+ BUILD/EPC/epc.local.enb.conf.in MNC \"92\"
+ BUILD/EPC/epc.local.enb.conf.in TAC \"1\"
+ BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\"
+ BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\"
+ SCRIPTS/build_epc
+ -c -l
+ SCRIPTS/build_hss
+ -c -l
+
+
+
+ /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
+
+ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000
+
+ sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 300 -B 192.172.0.1
+
+
+ True
+ USRPb210.ALU_EPC.Bandrich.5MHz.FDD.Band_7.DL.2TX.2RX
+ 10
+
+
+
+ lte-softmodem
+
+ calisson
+ stevens
+ amerique
+ 360
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 130
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 2
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 2
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+
+
+ $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
+ -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf
+
+
+
+
+ True
+
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
+
+ while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.2
+
+ throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec duration=300.0s
+
+ True
+ sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
+
+
+ /tmp
+ BUILD/EPC/epc.local.enb.conf.in MCC \"208\"
+ BUILD/EPC/epc.local.enb.conf.in MNC \"92\"
+ BUILD/EPC/epc.local.enb.conf.in TAC \"1\"
+ BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\"
+ BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\"
+ SCRIPTS/build_epc
+ -c -l
+ SCRIPTS/build_hss
+ -c -l
+
+
+
+ /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
+
+ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000
+
+ sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 300 -B 192.172.0.1
+
+
+ True
+ USRPb210.ALU_EPC.Bandrich.10MHz.FDD.Band_7.DL.2TX.2RX
+ 10
+
+
+
+ lte-softmodem
+
+ calisson
+ stevens
+ amerique
+ 360
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 100
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 130
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 2
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 2
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+
+
+ $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
+ -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf
+
+
+
+
+ True
+
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
+
+ while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.2
+
+ throughput_test min=15.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec duration=300.0s
+
+ True
+ sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
+
+
+ /tmp
+ BUILD/EPC/epc.local.enb.conf.in MCC \"208\"
+ BUILD/EPC/epc.local.enb.conf.in MNC \"92\"
+ BUILD/EPC/epc.local.enb.conf.in TAC \"1\"
+ BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\"
+ BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\"
+ SCRIPTS/build_epc
+ -c -l
+ SCRIPTS/build_hss
+ -c -l
+
+
+
+ /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
+
+ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000
+
+ sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 300 -B 192.172.0.1
+
+
+ True
+ USRPb210.ALU_EPC.Bandrich.20MHz.FDD.Band_7.DL.2TX.2RX
+ 10
+
+
+
+
+ lte-softmodem
+
+ mozart
+ stevens
+ amerique
+ 360
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf N_RB_DL 25
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_PORT_FOR_S1U 2152
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+ sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail
+
+ $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
+ -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf
+
+
+
+
+ True
+
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
+
+ while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 300 -B 192.172.0.2
+
+
+
+ True
+ sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
+
+ /tmp
+ BUILD/EPC/epc.local.enb.conf.in MCC \"208\"
+ BUILD/EPC/epc.local.enb.conf.in MNC \"92\"
+ BUILD/EPC/epc.local.enb.conf.in TAC \"1\"
+ BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\"
+ BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\"
+ SCRIPTS/build_epc
+ -c -l
+ SCRIPTS/build_hss
+ -c -l
+
+
+
+ /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
+
+ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000
+
+ sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.1
+
+ throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec duration=300.0s
+
+ True
+ USRPx310.ALU_EPC.Bandrich.5MHz.FDD.Band_7.UL.1TX.1RX
+ 10
+
+
+
+
+ lte-softmodem
+
+ mozart
+ stevens
+ amerique
+ 360
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310..conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf N_RB_DL 50
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.conf ENB_PORT_FOR_S1U 2152
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+ sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail
+
+ $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
+ -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf
+
+
+
+
+ True
+
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
+
+ while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 300 -B 192.172.0.2
+
+
+
+ True
+ sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
+
+ /tmp
+ BUILD/EPC/epc.local.enb.conf.in MCC \"208\"
+ BUILD/EPC/epc.local.enb.conf.in MNC \"92\"
+ BUILD/EPC/epc.local.enb.conf.in TAC \"1\"
+ BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\"
+ BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\"
+ SCRIPTS/build_epc
+ -c -l
+ SCRIPTS/build_hss
+ -c -l
+
+
+
+ /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
+
+ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000
+
+ sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.1
+
+ throughput_test min=2.0Mbits/sec max=2.0Mbits/sec average=2.0Mbits/sec duration=300.0s
+
+ True
+ USRPx310.ALU_EPC.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX
+ 10
+
+
+
+ lte-softmodem
+
+ mozart
+ stevens
+ amerique
+ 360
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf N_RB_DL 100
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.remote.conf ENB_PORT_FOR_S1U 2152
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+ sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail
+
+ $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
+ -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf
+
+
+
+
+ True
+
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
+
+ while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 300 -B 192.172.0.2
+
+
+
+ True
+ sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
+
+ /tmp
+ BUILD/EPC/epc.local.enb.conf.in MCC \"208\"
+ BUILD/EPC/epc.local.enb.conf.in MNC \"92\"
+ BUILD/EPC/epc.local.enb.conf.in TAC \"1\"
+ BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\"
+ BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\"
+ SCRIPTS/build_epc
+ -c -l
+ SCRIPTS/build_hss
+ -c -l
+
+
+
+ /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
+
+ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000
+
+ sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.1
+
+ throughput_test min=4.0Mbits/sec max=4.0Mbits/sec average=4.0Mbits/sec duration=300.0s
+
+ True
+ USRPx310.ALU_EPC.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX
+ 10
+
+
+
+ lte-softmodem
+
+ mozart
+ stevens
+ amerique
+ 360
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf N_RB_DL 25
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_PORT_FOR_S1U 2152
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+ sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail
+
+ $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
+ -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf
+
+
+
+
+ True
+
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
+
+ while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.2
+
+ True
+ sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
+ throughput_test min=4.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec duration=300.0s
+
+
+ /tmp
+ BUILD/EPC/epc.local.enb.conf.in MCC \"208\"
+ BUILD/EPC/epc.local.enb.conf.in MNC \"92\"
+ BUILD/EPC/epc.local.enb.conf.in TAC \"1\"
+ BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\"
+ BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\"
+ SCRIPTS/build_epc
+ -c -l
+ SCRIPTS/build_hss
+ -c -l
+
+
+
+ /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
+
+ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000
+
+ sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 300 -B 192.172.0.1
+
+
+ True
+ USRPx310.ALU_EPC.Bandrich.5MHz.FDD.Band_7.DL.1TX.1RX
+ 10
+
+
+
+ lte-softmodem
+
+ mozart
+ stevens
+ amerique
+ 360
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf N_RB_DL 50
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf ENB_PORT_FOR_S1U 2152
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+ sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail
+ sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail
+ $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
+ -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf
+
+
+
+
+ True
+
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
+
+ while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.2
+
+ True
+ sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
+ throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec duration=300.0s
+
+
+ /tmp
+ BUILD/EPC/epc.local.enb.conf.in MCC \"208\"
+ BUILD/EPC/epc.local.enb.conf.in MNC \"92\"
+ BUILD/EPC/epc.local.enb.conf.in TAC \"1\"
+ BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\"
+ BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\"
+ SCRIPTS/build_epc
+ -c -l
+ SCRIPTS/build_hss
+ -c -l
+
+
+
+ /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
+
+ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000
+
+ sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 300 -B 192.172.0.1
+
+
+ True
+ USRPx310.ALU_EPC.Bandrich.10MHz.FDD.Band_7.DL.1TX.1RX
+ 10
+
+
+
+ lte-softmodem
+
+ mozart
+ stevens
+ amerique
+ 360
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf N_RB_DL 100
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_PORT_FOR_S1U 2152
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+ sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail
+
+ $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
+ -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.conf
+
+
+
+
+ True
+
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
+
+ while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.2
+
+ True
+ sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
+ throughput_test min=15.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec duration=300.0s
+
+
+ /tmp
+ BUILD/EPC/epc.local.enb.conf.in MCC \"208\"
+ BUILD/EPC/epc.local.enb.conf.in MNC \"92\"
+ BUILD/EPC/epc.local.enb.conf.in TAC \"1\"
+ BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\"
+ BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\"
+ SCRIPTS/build_epc
+ -c -l
+ SCRIPTS/build_hss
+ -c -l
+
+
+
+ /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
+
+ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000
+
+ sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 300 -B 192.172.0.1
+
+
+ True
+ USRPx310.ALU_EPC.Bandrich.20MHz.FDD.Band_7.DL.1TX.1RX
+ 10
+
+
+
+
+
+
+ lte-softmodem
+
+ calisson
+ stevens
+ amerique
+ 360
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 25
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w EXMIMO -x -c
+ sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2; dmesg|tail
+
+ $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
+ -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf
+
+
+
+
+ True
+
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
+
+ while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 300 -B 192.172.0.2
+
+
+
+ True
+ sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
+
+ /tmp
+ BUILD/EPC/epc.local.enb.conf.in MCC \"208\"
+ BUILD/EPC/epc.local.enb.conf.in MNC \"92\"
+ BUILD/EPC/epc.local.enb.conf.in TAC \"1\"
+ BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\"
+ BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\"
+ SCRIPTS/build_epc
+ -c -l
+ SCRIPTS/build_hss
+ -c -l
+
+
+
+ /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
+
+ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000
+
+ sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.1
+
+ throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec duration=300.0s
+
+ True
+ EXMIMO.ALU_EPC.Bandrich.5MHz.FDD.Band_7.UL.1TX.1RX
+ 10
+
+
+
+
+ lte-softmodem
+
+ calisson
+ stevens
+ amerique
+ 360
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 50
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w EXMIMO -x -c
+ sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail
+
+ $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
+ -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf
+
+
+
+
+ True
+
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
+
+ while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 300 -B 192.172.0.2
+
+
+
+ True
+ sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
+
+ /tmp
+ BUILD/EPC/epc.local.enb.conf.in MCC \"208\"
+ BUILD/EPC/epc.local.enb.conf.in MNC \"92\"
+ BUILD/EPC/epc.local.enb.conf.in TAC \"1\"
+ BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\"
+ BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\"
+ SCRIPTS/build_epc
+ -c -l
+ SCRIPTS/build_hss
+ -c -l
+
+
+
+ /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
+
+ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000
+
+ sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.1
+
+ throughput_test min=2.0Mbits/sec max=2.0Mbits/sec average=2.0Mbits/sec duration=300.0s
+
+ True
+ EXMIMO.ALU_EPC.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX
+ 10
+
+
+
+ lte-softmodem
+
+ calisson
+ stevens
+ amerique
+ 360
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 100
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w EXMIMO -x -c
+ sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail
+
+ $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
+ -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf
+
+
+
+
+ True
+
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
+
+ while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -u -c 192.172.0.1 -b 10Mbits/s -t 300 -B 192.172.0.2
+
+
+
+ True
+ sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
+
+ /tmp
+ BUILD/EPC/epc.local.enb.conf.in MCC \"208\"
+ BUILD/EPC/epc.local.enb.conf.in MNC \"92\"
+ BUILD/EPC/epc.local.enb.conf.in TAC \"1\"
+ BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\"
+ BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\"
+ SCRIPTS/build_epc
+ -c -l
+ SCRIPTS/build_hss
+ -c -l
+
+
+
+ /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
+
+ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000
+
+ sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.1
+
+ throughput_test min=4.0Mbits/sec max=4.0Mbits/sec average=4.0Mbits/sec duration=300.0s
+
+ True
+ EXMIMO.ALU_EPC.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX
+ 10
+
+
+
+ lte-softmodem
+
+ calisson
+ stevens
+ amerique
+ 360
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 25
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w EXMIMO -x -c
+ sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail
+
+ $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
+ -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf
+
+
+
+
+ True
+
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
+
+ while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.2
+
+ True
+ sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
+ throughput_test min=4.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec duration=300.0s
+
+
+ /tmp
+ BUILD/EPC/epc.local.enb.conf.in MCC \"208\"
+ BUILD/EPC/epc.local.enb.conf.in MNC \"92\"
+ BUILD/EPC/epc.local.enb.conf.in TAC \"1\"
+ BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\"
+ BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\"
+ SCRIPTS/build_epc
+ -c -l
+ SCRIPTS/build_hss
+ -c -l
+
+
+
+ /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
+
+ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000
+
+ sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 300 -B 192.172.0.1
+
+
+ True
+ EXMIMO.ALU_EPC.Bandrich.5MHz.FDD.Band_7.DL.1TX.1RX
+ 10
+
+
+
+ lte-softmodem
+
+ calisson
+ stevens
+ amerique
+ 360
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 50
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w EXMIMO -x -c
+ sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail
+
+ $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
+ -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf
+
+
+
+
+ True
+
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
+
+ while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.2
+
+ True
+ sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
+ throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec duration=300.0s
+
+
+ /tmp
+ BUILD/EPC/epc.local.enb.conf.in MCC \"208\"
+ BUILD/EPC/epc.local.enb.conf.in MNC \"92\"
+ BUILD/EPC/epc.local.enb.conf.in TAC \"1\"
+ BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\"
+ BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\"
+ SCRIPTS/build_epc
+ -c -l
+ SCRIPTS/build_hss
+ -c -l
+
+
+
+ /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
+
+ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000
+
+ sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 300 -B 192.172.0.1
+
+
+ True
+ EXMIMO.ALU_EPC.Bandrich.10MHz.FDD.Band_7.DL.1TX.1RX
+ 10
+
+
+
+ lte-softmodem
+
+ calisson
+ stevens
+ amerique
+ 360
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf N_RB_DL 100
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w EXMIMO -x -c
+ sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail
+
+ $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
+ -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf
+
+
+
+
+ True
+
+ /tmp
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"6\"
+ $OPENAIR_DIR/cmake_targets/build_oai
+ --eNB -w USRP -x -c
+
+
+ $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
+
+ while true; do var=`ifconfig ppp0` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5; iperf -s -i 1 -u -f m -B 192.172.0.2
+
+ True
+ sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue
+ throughput_test min=15.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec duration=300.0s
+
+
+ /tmp
+ BUILD/EPC/epc.local.enb.conf.in MCC \"208\"
+ BUILD/EPC/epc.local.enb.conf.in MNC \"92\"
+ BUILD/EPC/epc.local.enb.conf.in TAC \"1\"
+ BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\"
+ BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\"
+ SCRIPTS/build_epc
+ -c -l
+ SCRIPTS/build_hss
+ -c -l
+
+
+
+ /opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000
+
+ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000
+
+ sleep 60; iperf -u -c 192.172.0.2 -b 10Mbits/s -t 300 -B 192.172.0.1
+
+
+ True
+ EXMIMO.ALU_EPC.Bandrich.20MHz.FDD.Band_7.DL.1TX.1RX
+ 10
+
+
+
+
lte-softmodem
@@ -1010,7 +2805,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
$OPENAIR_DIR/cmake_targets/build_oai
- --eNB -w USRP
+ --eNB -w USRP -c
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
@@ -1026,7 +2821,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\"
$OPENAIR_DIR/cmake_targets/build_oai
- --eNB -w USRP
+ --eNB -w USRP -c
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -1067,7 +2862,7 @@
True
- 2
+ 10
@@ -1089,7 +2884,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
$OPENAIR_DIR/cmake_targets/build_oai
- --eNB -w USRP
+ --eNB -w USRP -c
$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
@@ -1105,7 +2900,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\"
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\"
$OPENAIR_DIR/cmake_targets/build_oai
- --eNB -w USRP
+ --eNB -w USRP -c
$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue
@@ -1147,7 +2942,7 @@
True
- 2
+ 10
diff --git a/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py b/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py
index aa041360b7..ae25013f52 100755
--- a/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py
+++ b/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py
@@ -127,7 +127,7 @@ def start_ue () :
ip = IPRoute()
idx = ip.link_lookup(ifname=iface)[0]
os.system ('route add 192.172.0.1 ppp0')
- os.system ('ping 192.172.0.1')
+ os.system ('ping -c 5 192.172.0.1')
break
except Exception, e:
error = ' Interface ' + iface + 'does not exist...'
diff --git a/cmake_targets/autotests/tools/exmimo/exmimo_stop.m b/cmake_targets/autotests/tools/exmimo/exmimo_stop.m
new file mode 100644
index 0000000000..82aa1f2845
--- /dev/null
+++ b/cmake_targets/autotests/tools/exmimo/exmimo_stop.m
@@ -0,0 +1,4 @@
+n=oarf_get_num_detected_cards;
+for i=n-1:0
+ oarf_stop(i);
+end
diff --git a/cmake_targets/autotests/tools/exmimo/init_exmimo2 b/cmake_targets/autotests/tools/exmimo/init_exmimo2
new file mode 100755
index 0000000000..66eedf93dd
--- /dev/null
+++ b/cmake_targets/autotests/tools/exmimo/init_exmimo2
@@ -0,0 +1,85 @@
+#!/bin/bash
+
+################################################################################
+# OpenAirInterface
+# Copyright(c) 1999 - 2015 Eurecom
+#
+# OpenAirInterface is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+#
+# OpenAirInterface is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with OpenAirInterface.The full GNU General Public License is
+# included in this distribution in the file called "COPYING". If not,
+# see .
+#
+# Contact Information
+# OpenAirInterface Admin: openair_admin@eurecom.fr
+# OpenAirInterface Tech : openair_tech@eurecom.fr
+# OpenAirInterface Dev : openair4g-devel@lists.eurecom.fr
+#
+# Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
+#
+################################################################################
+# file init_nas_nos1
+# brief loads the nasmesh module and sets up the radio bearers (used to provide ip interface without S1 interface)
+# author Florian Kaltenberger
+#
+#######################################
+
+load_module()
+{
+ mod_name=${1##*/}
+ mod_name=${mod_name%.*}
+ if awk "/$mod_name/ {found=1 ;exit} END {if (found!=1) exit 1}" /proc/modules
+ then
+ echo "module $mod_name already loaded: I remove it first"
+ sudo rmmod $mod_name
+ fi
+ echo loading $mod_name
+ sudo insmod $1
+}
+
+
+function main()
+{
+PCI=`lspci -m | grep Xilinx`
+if [ -z "$PCI" ]; then
+ echo "No card found. Stopping!"
+ return
+fi
+
+## This part corrects the wrong configuration of the endpoint done by the bios in some machines
+echo "$PCI" | while read config_reg; do
+SLOT_NUMBER=`echo $config_reg | awk -F\" '{print $1}'`
+sudo setpci -s $SLOT_NUMBER 60.b=10
+done
+
+
+load_module $OPENAIR_DIR/targets/bin/openair_rf.ko
+sleep 1
+
+if [ ! -e /dev/openair0 ]; then
+ sudo mknod /dev/openair0 c 127 0
+ sudo chmod a+rw /dev/openair0
+fi
+
+DEVICE=`echo $PCI | awk -F\" '{print $(NF-1)}' | awk '{print $2}'`
+DEVICE_SWID=${DEVICE:2:2}
+if [ $DEVICE_SWID == '0a' ]; then
+ echo "Using firware version 10"
+ $OPENAIR_DIR/targets/bin/updatefw -s 0x43fffff0 -b -f $OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/sdr_expressmimo2_v10
+else
+ echo 'No corresponding firmware found'
+ return
+fi
+}
+
+main "$@"
diff --git a/cmake_targets/autotests/tools/exmimo/oarf_config_exmimo.oct b/cmake_targets/autotests/tools/exmimo/oarf_config_exmimo.oct
new file mode 100755
index 0000000000..f8c24153f6
Binary files /dev/null and b/cmake_targets/autotests/tools/exmimo/oarf_config_exmimo.oct differ
diff --git a/cmake_targets/autotests/tools/exmimo/oarf_get_frame.oct b/cmake_targets/autotests/tools/exmimo/oarf_get_frame.oct
new file mode 100755
index 0000000000..8dd108b798
Binary files /dev/null and b/cmake_targets/autotests/tools/exmimo/oarf_get_frame.oct differ
diff --git a/cmake_targets/autotests/tools/exmimo/oarf_get_num_detected_cards.oct b/cmake_targets/autotests/tools/exmimo/oarf_get_num_detected_cards.oct
new file mode 100755
index 0000000000..3d84d86eba
Binary files /dev/null and b/cmake_targets/autotests/tools/exmimo/oarf_get_num_detected_cards.oct differ
diff --git a/cmake_targets/autotests/tools/exmimo/oarf_send_frame.oct b/cmake_targets/autotests/tools/exmimo/oarf_send_frame.oct
new file mode 100755
index 0000000000..4da12f5172
Binary files /dev/null and b/cmake_targets/autotests/tools/exmimo/oarf_send_frame.oct differ
diff --git a/cmake_targets/autotests/tools/exmimo/oarf_stop.oct b/cmake_targets/autotests/tools/exmimo/oarf_stop.oct
new file mode 100755
index 0000000000..b234829cc0
Binary files /dev/null and b/cmake_targets/autotests/tools/exmimo/oarf_stop.oct differ
diff --git a/cmake_targets/autotests/tools/exmimo/oarf_stop_without_reset.oct b/cmake_targets/autotests/tools/exmimo/oarf_stop_without_reset.oct
new file mode 100755
index 0000000000..74ca17e3e0
Binary files /dev/null and b/cmake_targets/autotests/tools/exmimo/oarf_stop_without_reset.oct differ
diff --git a/cmake_targets/autotests/tools/exmimo/openair_rf.ko b/cmake_targets/autotests/tools/exmimo/openair_rf.ko
new file mode 100644
index 0000000000..2f948c0871
Binary files /dev/null and b/cmake_targets/autotests/tools/exmimo/openair_rf.ko differ
diff --git a/cmake_targets/autotests/tools/exmimo/updatefw b/cmake_targets/autotests/tools/exmimo/updatefw
new file mode 100755
index 0000000000..d404a74cbb
Binary files /dev/null and b/cmake_targets/autotests/tools/exmimo/updatefw differ
diff --git a/cmake_targets/build_oai b/cmake_targets/build_oai
index 6d337c6d52..25bec96b98 100755
--- a/cmake_targets/build_oai
+++ b/cmake_targets/build_oai
@@ -555,17 +555,22 @@ function main() {
#####################
if [ "$OAI_TEST" = "1" ]; then
echo_info "10. Running OAI pre commit tests (pre-ci) ..."
- read -s -p "Enter Password: " mypassword
- echo -e "\n"
+ echo_error "These scripts ASSUME that user is in /etc/sudoers and can execute commands without PASSWORD prompt"
+ echo_error "Add the following lines in /etc/sudoers file to make your __user_name__ sudo without password prompt"
+ echo_error " __your_user_name__ ALL = (ALL:ALL) NOPASSWD: ALL"
+ echo_error " __your_user_name__ ALL = (ALL) NOPASSWD: ALL "
echo_info "The log file for the autotest script for debugging is located here: $OPENAIR_DIR/cmake_targets/autotests/log/autotests.log "
echo_info "The results of autotests results is located here: $OPENAIR_DIR/cmake_targets/autotests/log/results_autotests.xml "
echo_info "You can hit CTRL-C any time to terminate the autotests..."
+ echo "Current User Name: $USER"
+ read -s -p "Enter Password: " mypassword
+ echo -e "\n"
rm -fr $OPENAIR_DIR/cmake_targets/autotests/log
mkdir -p $OPENAIR_DIR/cmake_targets/autotests/log
if [ "$RUN_GROUP" -eq "1" ]; then
- echo '$mypassword' | $OPENAIR_DIR/cmake_targets/autotests/run_exec_autotests.bash -g "$TEST_CASE_GROUP" >& $OPENAIR_DIR/cmake_targets/autotests/log/autotests.log &
+ $OPENAIR_DIR/cmake_targets/autotests/run_exec_autotests.bash -g "$TEST_CASE_GROUP" -p '$mypassword' >& $OPENAIR_DIR/cmake_targets/autotests/log/autotests.log &
else
- echo '$mypassword' | $OPENAIR_DIR/cmake_targets/autotests/run_exec_autotests.bash >& $OPENAIR_DIR/cmake_targets/autotests/log/autotests.log &
+ $OPENAIR_DIR/cmake_targets/autotests/run_exec_autotests.bash -p '$mypassword' >& $OPENAIR_DIR/cmake_targets/autotests/log/autotests.log &
fi
wait
else
diff --git a/oaienv b/oaienv
index 383c75a4b1..f6b298debf 100644
--- a/oaienv
+++ b/oaienv
@@ -5,7 +5,8 @@ export OPENAIR1_DIR=$OPENAIR_HOME/openair1
export OPENAIR2_DIR=$OPENAIR_HOME/openair2
export OPENAIR3_DIR=$OPENAIR_HOME/openair3
export OPENAIR_TARGETS=$OPENAIR_HOME/targets
-export OPENAIRITS_DIR=$OPENAIR_HOME/openairITS
+
+export PATH=$PATH:$OPENAIR_TARGETS/bin
alias oai='cd $OPENAIR_HOME'
alias oai0='cd $OPENAIR0_DIR'
diff --git a/openair1/PHY/LTE_TRANSPORT/dci_tools.c b/openair1/PHY/LTE_TRANSPORT/dci_tools.c
index 6efea1b8fb..03f0d97cf5 100644
--- a/openair1/PHY/LTE_TRANSPORT/dci_tools.c
+++ b/openair1/PHY/LTE_TRANSPORT/dci_tools.c
@@ -1103,8 +1103,12 @@ int generate_eNB_dlsch_params_from_dci(int frame,
dlsch[0]->harq_ids[subframe] = harq_pid;
- if (dlsch0_harq->round == 0)
+ if (dlsch0_harq->round == 0) {
+ /* necessary test? */
+ if (dlsch0_harq->status == SCH_IDLE)
+ remove_harq_pid_from_freelist(dlsch[0], harq_pid);
dlsch0_harq->status = ACTIVE;
+ }
break;
@@ -1238,6 +1242,9 @@ int generate_eNB_dlsch_params_from_dci(int frame,
if (dlsch0_harq->round == 0) {
+ /* necessary test? */
+ if (dlsch0_harq->status == SCH_IDLE)
+ remove_harq_pid_from_freelist(dlsch[0], harq_pid);
dlsch0_harq->status = ACTIVE;
// printf("Setting DLSCH process %d to ACTIVE\n",harq_pid);
// MCS and TBS don't change across HARQ rounds
@@ -1598,10 +1605,16 @@ int generate_eNB_dlsch_params_from_dci(int frame,
// reset HARQ process if this is the first transmission
if (dlsch0_harq->round == 0) {
+ /* necessary test? */
+ if (dlsch0_harq->status == SCH_IDLE)
+ remove_harq_pid_from_freelist(dlsch0, harq_pid);
dlsch0_harq->status = ACTIVE;
}
if (dlsch1_harq->round == 0) {
+ /* necessary test? */
+ if (dlsch1_harq->status == SCH_IDLE)
+ remove_harq_pid_from_freelist(dlsch1, harq_pid);
dlsch1_harq->status = ACTIVE;
}
@@ -1980,10 +1993,16 @@ int generate_eNB_dlsch_params_from_dci(int frame,
// reset HARQ process if this is the first transmission
if ((dlsch0->active==1) && (dlsch0_harq->round == 0)) {
+ /* necessary test? */
+ if (dlsch0_harq->status == SCH_IDLE)
+ remove_harq_pid_from_freelist(dlsch0, harq_pid);
dlsch0_harq->status = ACTIVE;
}
if ((dlsch1->active==1) && (dlsch1_harq->round == 0)) {
+ /* necessary test? */
+ if (dlsch1_harq->status == SCH_IDLE)
+ remove_harq_pid_from_freelist(dlsch1, harq_pid);
dlsch1_harq->status = ACTIVE;
}
@@ -2126,16 +2145,23 @@ int generate_eNB_dlsch_params_from_dci(int frame,
// check if either TB is disabled (see 36-213 V8.6 p. 26)
- if ((dlsch0_harq->rvidx == 1) && (dlsch0_harq->mcs == 0))
+ if ((dlsch0_harq->rvidx == 1) && (dlsch0_harq->mcs == 0)) {
+ LOG_W(PHY, "what to do with respect to remove_harq_pid_from_freelist?\n");
dlsch0_harq->status = DISABLED;
+ }
- if ((dlsch1_harq->rvidx == 1) && (dlsch1_harq->mcs == 0))
+ if ((dlsch1_harq->rvidx == 1) && (dlsch1_harq->mcs == 0)) {
+ LOG_W(PHY, "what to do with respect to remove_harq_pid_from_freelist?\n");
dlsch1_harq->status = DISABLED;
+ }
dlsch0_harq->Nl = 1;
if (dlsch0_harq->round == 0) {
+ /* necessary test? */
+ if (dlsch0_harq->status == SCH_IDLE)
+ remove_harq_pid_from_freelist(dlsch0, harq_pid);
dlsch0_harq->status = ACTIVE;
// printf("Setting DLSCH process %d to ACTIVE\n",harq_pid);
}
@@ -2300,11 +2326,17 @@ int generate_eNB_dlsch_params_from_dci(int frame,
if ((dlsch0_harq->round == 0) && (dlsch0->active == 1) ) {
+ /* necessary test? */
+ if (dlsch0_harq->status == SCH_IDLE)
+ remove_harq_pid_from_freelist(dlsch0, harq_pid);
dlsch0_harq->status = ACTIVE;
dlsch0_harq->mcs = mcs1;
}
if ((dlsch1_harq->round == 0) && (dlsch1->active == 1) ) {
+ /* necessary test? */
+ if (dlsch1_harq->status == SCH_IDLE)
+ remove_harq_pid_from_freelist(dlsch1, harq_pid);
dlsch1_harq->status = ACTIVE;
dlsch1_harq->mcs = mcs2;
}
@@ -2468,6 +2500,9 @@ int generate_eNB_dlsch_params_from_dci(int frame,
if (dlsch0_harq->round == 0) {
+ /* necessary test? */
+ if (dlsch0_harq->status == SCH_IDLE)
+ remove_harq_pid_from_freelist(dlsch0, harq_pid);
dlsch0_harq->status = ACTIVE;
// printf("Setting DLSCH process %d to ACTIVE\n",harq_pid);
}
@@ -2600,6 +2635,9 @@ int generate_eNB_dlsch_params_from_dci(int frame,
// dlsch0_harq->Ndi = ((DCI1E_5MHz_2A_M10PRB_TDD_t *)dci_pdu)->ndi;
if (dlsch0_harq->round == 0) {
+ /* necessary test? */
+ if (dlsch0_harq->status == SCH_IDLE)
+ remove_harq_pid_from_freelist(dlsch0, harq_pid);
dlsch0_harq->status = ACTIVE;
// printf("Setting DLSCH process %d to ACTIVE\n",harq_pid);
}
diff --git a/openair1/PHY/LTE_TRANSPORT/defs.h b/openair1/PHY/LTE_TRANSPORT/defs.h
index 135e052f6e..2fbb309339 100644
--- a/openair1/PHY/LTE_TRANSPORT/defs.h
+++ b/openair1/PHY/LTE_TRANSPORT/defs.h
@@ -264,6 +264,13 @@ typedef struct {
uint8_t error_threshold;
/// Pointers to 8 HARQ processes for the DLSCH
LTE_DL_eNB_HARQ_t *harq_processes[8];
+ /// circular list of free harq PIDs (the oldest come first)
+ /// (10 is arbitrary value, must be > to max number of DL HARQ processes in LTE)
+ int harq_pid_freelist[10];
+ /// the head position of the free list (if list is free then head=tail)
+ int head_freelist;
+ /// the tail position of the free list
+ int tail_freelist;
/// Number of soft channel bits
uint32_t G;
/// Codebook index for this dlsch (0,1,2,3)
diff --git a/openair1/PHY/LTE_TRANSPORT/dlsch_coding.c b/openair1/PHY/LTE_TRANSPORT/dlsch_coding.c
index 83066480b4..f051dc3ecf 100644
--- a/openair1/PHY/LTE_TRANSPORT/dlsch_coding.c
+++ b/openair1/PHY/LTE_TRANSPORT/dlsch_coding.c
@@ -152,6 +152,9 @@ LTE_eNB_DLSCH_t *new_eNB_dlsch(unsigned char Kmimo,unsigned char Mdlharq,unsigne
for (i=0; i<10; i++)
dlsch->harq_ids[i] = Mdlharq;
+ dlsch->head_freelist = 0;
+ dlsch->tail_freelist = 0;
+
for (i=0; iharq_processes[i] = (LTE_DL_eNB_HARQ_t *)malloc16(sizeof(LTE_DL_eNB_HARQ_t));
LOG_T(PHY, "Required mem size %d (bw scaling %d), dlsch->harq_processes[%d] %p\n",
@@ -192,6 +195,8 @@ LTE_eNB_DLSCH_t *new_eNB_dlsch(unsigned char Kmimo,unsigned char Mdlharq,unsigne
msg("Can't get harq_p %d\n",i);
exit_flag=3;
}
+
+ put_harq_pid_in_freelist(dlsch, i);
}
if (exit_flag==0) {
diff --git a/openair1/PHY/TOOLS/cdot_prod.c b/openair1/PHY/TOOLS/cdot_prod.c
index 195869c913..19be1f7b0f 100644
--- a/openair1/PHY/TOOLS/cdot_prod.c
+++ b/openair1/PHY/TOOLS/cdot_prod.c
@@ -119,6 +119,7 @@ int32_t dot_product(int16_t *x,
_m_empty();
return(result);
+
#elif defined(__arm__)
int16x4_t *x_128=(int16x4_t*)x;
int16x4_t *y_128=(int16x4_t*)y;
diff --git a/openair1/PHY/TOOLS/lte_dfts.c b/openair1/PHY/TOOLS/lte_dfts.c
index c031d5d384..ec4577a67a 100644
--- a/openair1/PHY/TOOLS/lte_dfts.c
+++ b/openair1/PHY/TOOLS/lte_dfts.c
@@ -94,7 +94,7 @@ static inline void cmacc(__m128i a,__m128i b, __m128i *re32, __m128i *im32)
cmac_tmp = _mm_sign_epi16(b,*(__m128i*)reflip);
// cmac_tmp = _mm_shufflelo_epi16(b,_MM_SHUFFLE(2,3,0,1));
// cmac_tmp = _mm_shufflehi_epi16(cmac_tmp,_MM_SHUFFLE(2,3,0,1));
- cmac_tmp = _mm_shuffle_epi8(b,_mm_set_epi8(13,12,15,14,9,8,11,10,5,4,7,6,1,0,3,2));
+ cmac_tmp = _mm_shuffle_epi8(cmac_tmp,_mm_set_epi8(13,12,15,14,9,8,11,10,5,4,7,6,1,0,3,2));
cmac_tmp_im32 = _mm_madd_epi16(cmac_tmp,a);
*re32 = _mm_add_epi32(*re32,cmac_tmp_re32);
diff --git a/openair1/SCHED/defs.h b/openair1/SCHED/defs.h
index bebe476dcd..a88327ba92 100644
--- a/openair1/SCHED/defs.h
+++ b/openair1/SCHED/defs.h
@@ -401,6 +401,8 @@ uint16_t get_Np(uint8_t N_RB_DL,uint8_t nCCE,uint8_t plus1);
int get_nCCE_offset(unsigned char L, int nCCE, int common_dci, unsigned short rnti, unsigned char subframe);
+void put_harq_pid_in_freelist(LTE_eNB_DLSCH_t *DLSCH_ptr, int harq_pid);
+void remove_harq_pid_from_freelist(LTE_eNB_DLSCH_t *DLSCH_ptr, int harq_pid);
int8_t find_ue(uint16_t rnti, PHY_VARS_eNB *phy_vars_eNB);
int32_t add_ue(int16_t rnti, PHY_VARS_eNB *phy_vars_eNB);
diff --git a/openair1/SCHED/phy_procedures_lte_eNb.c b/openair1/SCHED/phy_procedures_lte_eNb.c
index 165f2fbac6..d073657519 100755
--- a/openair1/SCHED/phy_procedures_lte_eNb.c
+++ b/openair1/SCHED/phy_procedures_lte_eNb.c
@@ -136,6 +136,30 @@ uint8_t is_SR_subframe(PHY_VARS_eNB *phy_vars_eNB,uint8_t UE_id,uint8_t sched_su
return(0);
}
+void put_harq_pid_in_freelist(LTE_eNB_DLSCH_t *DLSCH_ptr, int harq_pid)
+{
+ DLSCH_ptr->harq_pid_freelist[DLSCH_ptr->tail_freelist] = harq_pid;
+ DLSCH_ptr->tail_freelist = (DLSCH_ptr->tail_freelist + 1) % 10;
+}
+
+void remove_harq_pid_from_freelist(LTE_eNB_DLSCH_t *DLSCH_ptr, int harq_pid)
+{
+ if (DLSCH_ptr->head_freelist == DLSCH_ptr->tail_freelist) {
+ LOG_E(PHY, "%s:%d: you cannot read this!\n", __FILE__, __LINE__);
+ abort();
+ }
+ /* basic check, in case several threads deal with the free list at the same time
+ * in normal situations it should not happen, that's also why we don't use any
+ * locking mechanism to protect the free list
+ * to be refined in case things don't work properly
+ */
+ if (harq_pid != DLSCH_ptr->harq_pid_freelist[DLSCH_ptr->head_freelist]) {
+ LOG_E(PHY, "%s:%d: critical error, get in touch with the authors\n", __FILE__, __LINE__);
+ abort();
+ }
+ DLSCH_ptr->head_freelist = (DLSCH_ptr->head_freelist + 1) % 10;
+}
+
int32_t add_ue(int16_t rnti, PHY_VARS_eNB *phy_vars_eNB)
{
uint8_t i;
@@ -178,6 +202,7 @@ int32_t add_ue(int16_t rnti, PHY_VARS_eNB *phy_vars_eNB)
int32_t remove_ue(uint16_t rnti, PHY_VARS_eNB *phy_vars_eNB, uint8_t abstraction_flag)
{
uint8_t i;
+ int j;
for (i=0; idlsch_eNB[i]==NULL) || (phy_vars_eNB->ulsch_eNB[i]==NULL)) {
@@ -196,6 +221,13 @@ int32_t remove_ue(uint16_t rnti, PHY_VARS_eNB *phy_vars_eNB, uint8_t abstraction
//phy_vars_eNB->eNB_UE_stats[i].crnti = 0;
memset(&phy_vars_eNB->eNB_UE_stats[i],0,sizeof(LTE_eNB_UE_stats));
// mac_exit_wrapper("Removing UE");
+
+ /* clear the harq pid freelist */
+ phy_vars_eNB->dlsch_eNB[i][0]->head_freelist = 0;
+ phy_vars_eNB->dlsch_eNB[i][0]->tail_freelist = 0;
+ for (j = 0; j < 8; j++)
+ put_harq_pid_in_freelist(phy_vars_eNB->dlsch_eNB[i][0], j);
+
return(i);
}
}
@@ -224,14 +256,12 @@ int8_t find_next_ue_index(PHY_VARS_eNB *phy_vars_eNB)
int get_ue_active_harq_pid(const uint8_t Mod_id,const uint8_t CC_id,const uint16_t rnti, const int frame, const uint8_t subframe,uint8_t *harq_pid,uint8_t *round,const uint8_t ul_flag)
{
-
LTE_eNB_DLSCH_t *DLSCH_ptr;
LTE_eNB_ULSCH_t *ULSCH_ptr;
uint8_t ulsch_subframe,ulsch_frame;
uint8_t i;
int8_t UE_id = find_ue(rnti,PHY_vars_eNB_g[Mod_id][CC_id]);
int sf1=(10*frame)+subframe,sf2,sfdiff,sfdiff_max=7;
- int first_proc_found=0;
if (UE_id==-1) {
LOG_D(PHY,"Cannot find UE with rnti %x (Mod_id %d, CC_id %d)\n",rnti, Mod_id, CC_id);
@@ -247,18 +277,7 @@ int get_ue_active_harq_pid(const uint8_t Mod_id,const uint8_t CC_id,const uint16
for (i=0; iMdlharq; i++) {
if (DLSCH_ptr->harq_processes[i]!=NULL) {
- if (DLSCH_ptr->harq_processes[i]->status != ACTIVE) {
- // store first inactive process
- if (first_proc_found == 0) {
- first_proc_found = 1;
- *harq_pid = i;
- *round = 0;
- LOG_D(PHY,"process %d is first free process\n",i);
- }
- else {
- LOG_D(PHY,"process %d is free\n",i);
- }
- } else {
+ if (DLSCH_ptr->harq_processes[i]->status == ACTIVE) {
sf2 = (DLSCH_ptr->harq_processes[i]->frame*10) + DLSCH_ptr->harq_processes[i]->subframe;
if (sf2<=sf1)
sfdiff = sf1-sf2;
@@ -270,7 +289,6 @@ int get_ue_active_harq_pid(const uint8_t Mod_id,const uint8_t CC_id,const uint16
sfdiff_max = sfdiff;
*harq_pid = i;
*round = DLSCH_ptr->harq_processes[i]->round;
- first_proc_found = 1;
}
}
} else { // a process is not defined
@@ -278,6 +296,14 @@ int get_ue_active_harq_pid(const uint8_t Mod_id,const uint8_t CC_id,const uint16
return(-1);
}
}
+
+ /* if no active harq pid, get the oldest in the freelist, if any */
+ if (*harq_pid == 255 && DLSCH_ptr->head_freelist != DLSCH_ptr->tail_freelist) {
+ *harq_pid = DLSCH_ptr->harq_pid_freelist[DLSCH_ptr->head_freelist];
+ *round = 0;
+ LOG_D(PHY,"process %d is first free process\n", *harq_pid);
+ }
+
LOG_D(PHY,"get_ue_active_harq_pid DL => Frame %d, Subframe %d : harq_pid %d\n",
frame,subframe,*harq_pid);
} else { // This is a UL request
@@ -296,7 +322,6 @@ int get_ue_active_harq_pid(const uint8_t Mod_id,const uint8_t CC_id,const uint16
return(0);
}
-
int CCE_table[800];
void init_nCCE_table(void)
@@ -2868,6 +2893,7 @@ void process_HARQ_feedback(uint8_t UE_id,
dlsch_harq_proc->round = 0;
ue_stats->dlsch_l2_errors[dl_harq_pid[m]]++;
dlsch_harq_proc->status = SCH_IDLE;
+ put_harq_pid_in_freelist(dlsch, dl_harq_pid[m]);
dlsch->harq_ids[dl_subframe] = dlsch->Mdlharq;
}
} else {
@@ -2880,6 +2906,7 @@ void process_HARQ_feedback(uint8_t UE_id,
// Received ACK so set round to 0 and set dlsch_harq_pid IDLE
dlsch_harq_proc->round = 0;
dlsch_harq_proc->status = SCH_IDLE;
+ put_harq_pid_in_freelist(dlsch, dl_harq_pid[m]);
dlsch->harq_ids[dl_subframe] = dlsch->Mdlharq;
ue_stats->total_TBS = ue_stats->total_TBS +
@@ -3949,6 +3976,9 @@ void phy_procedures_eNB_RX(const unsigned char sched_subframe,PHY_VARS_eNB *phy_
phy_vars_eNB->eNB_UE_stats[i].sr_received++;
if (phy_vars_eNB->first_sr[i] == 1) { // this is the first request for uplink after Connection Setup, so clear HARQ process 0 use for Msg4
+ /* is this test necessary? */
+ if (phy_vars_eNB->dlsch_eNB[i][0]->harq_processes[0]->status != SCH_IDLE)
+ put_harq_pid_in_freelist(phy_vars_eNB->dlsch_eNB[i][0], 0);
phy_vars_eNB->first_sr[i] = 0;
phy_vars_eNB->dlsch_eNB[i][0]->harq_processes[0]->round=0;
phy_vars_eNB->dlsch_eNB[i][0]->harq_processes[0]->status=SCH_IDLE;
diff --git a/openair1/SIMULATION/TOOLS/abstraction.c b/openair1/SIMULATION/TOOLS/abstraction.c
index 34f92863b0..f26f450a7d 100644
--- a/openair1/SIMULATION/TOOLS/abstraction.c
+++ b/openair1/SIMULATION/TOOLS/abstraction.c
@@ -45,7 +45,7 @@ double **cos_lut=NULL,**sin_lut=NULL;
-void init_freq_channel(channel_desc_t *desc,uint16_t nb_rb,int16_t n_samples)
+int init_freq_channel(channel_desc_t *desc,uint16_t nb_rb,int16_t n_samples)
{
@@ -54,12 +54,14 @@ void init_freq_channel(channel_desc_t *desc,uint16_t nb_rb,int16_t n_samples)
int16_t f;
uint8_t l;
+ if ((n_samples&1)==0) {
+ fprintf(stderr, "freq_channel_init: n_samples has to be odd\n");
+ return(-1);
+ }
cos_lut = (double **)malloc(n_samples*sizeof(double*));
sin_lut = (double **)malloc(n_samples*sizeof(double*));
-
-
delta_f = nb_rb*180000/(n_samples-1);
for (f=-(n_samples>>1); f<(n_samples>>1); f++) {
@@ -81,9 +83,11 @@ void init_freq_channel(channel_desc_t *desc,uint16_t nb_rb,int16_t n_samples)
}
}
+
+ return(0);
}
-void freq_channel(channel_desc_t *desc,uint16_t nb_rb,int16_t n_samples)
+int freq_channel(channel_desc_t *desc,uint16_t nb_rb,int16_t n_samples)
{
@@ -93,18 +97,28 @@ void freq_channel(channel_desc_t *desc,uint16_t nb_rb,int16_t n_samples)
static int freq_channel_init=0;
static int n_samples_max=0;
- // printf("no of samples:%d,",n_samples);
+ // do some error checking
+ // n_samples has to be a odd number because we assume the spectrum is symmetric around the DC and includes the DC
+ if ((n_samples&1)==0) {
+ fprintf(stderr, "freq_channel: n_samples has to be odd\n");
+ return(-1);
+ }
+
// printf("no of taps:%d,",(int)desc->nb_taps);
if (freq_channel_init == 0) {
// we are initializing the lut for the largets possible n_samples=12*nb_rb+1
// if called with n_samples<12*nb_rb+1, we decimate the lut
n_samples_max=12*nb_rb+1;
- init_freq_channel(desc,nb_rb,n_samples_max);
- freq_channel_init=1;
+ if (init_freq_channel(desc,nb_rb,n_samples_max)==0)
+ freq_channel_init=1;
+ else
+ return(-1);
}
- d=n_samples_max/n_samples;
+ d=(n_samples_max-1)/(n_samples-1);
+
+ //printf("no_samples=%d, n_samples_max=%d, d=%d\n",n_samples,n_samples_max,d);
start_meas(&desc->interp_freq);
@@ -129,6 +143,8 @@ void freq_channel(channel_desc_t *desc,uint16_t nb_rb,int16_t n_samples)
}
stop_meas(&desc->interp_freq);
+
+ return(0);
}
double compute_pbch_sinr(channel_desc_t *desc,
diff --git a/openair1/SIMULATION/TOOLS/defs.h b/openair1/SIMULATION/TOOLS/defs.h
index 27463fad20..64e8d0561c 100644
--- a/openair1/SIMULATION/TOOLS/defs.h
+++ b/openair1/SIMULATION/TOOLS/defs.h
@@ -360,8 +360,8 @@ int gauss(unsigned int *gauss_LUT,unsigned char Nbits);
double gaussdouble(double,double);
void randominit(unsigned int seed_init);
double uniformrandom(void);
-void freq_channel(channel_desc_t *desc,uint16_t nb_rb, int16_t n_samples);
-void init_freq_channel(channel_desc_t *desc,uint16_t nb_rb,int16_t n_samples);
+int freq_channel(channel_desc_t *desc,uint16_t nb_rb, int16_t n_samples);
+int init_freq_channel(channel_desc_t *desc,uint16_t nb_rb,int16_t n_samples);
uint8_t multipath_channel_nosigconv(channel_desc_t *desc);
void multipath_tv_channel(channel_desc_t *desc,
double **tx_sig_re,
diff --git a/targets/ARCH/COMMON/common_lib.h b/targets/ARCH/COMMON/common_lib.h
index 227a100692..156da0c4ce 100644
--- a/targets/ARCH/COMMON/common_lib.h
+++ b/targets/ARCH/COMMON/common_lib.h
@@ -60,6 +60,11 @@ typedef enum {
max_gain=0,med_gain,byp_gain
} rx_gain_t;
+typedef enum {
+ duplex_mode_TDD=1,duplex_mode_FDD=0
+} duplex_mode_t;
+
+
/** @addtogroup _PHY_RF_INTERFACE_
* @{
*/
@@ -76,6 +81,8 @@ typedef struct {
int Mod_id;
// device log level
int log_level;
+ //! duplexing mode
+ duplex_mode_t duplex_mode;
//! number of downlink resource blocks
int num_rb_dl;
//! number of samples per frame
diff --git a/targets/ARCH/EXMIMO/DEFS/pcie_interface.h b/targets/ARCH/EXMIMO/DEFS/pcie_interface.h
index 925787cabf..713480b40b 100644
--- a/targets/ARCH/EXMIMO/DEFS/pcie_interface.h
+++ b/targets/ARCH/EXMIMO/DEFS/pcie_interface.h
@@ -316,7 +316,9 @@ typedef struct {
//
// In TDD mode, there are two ways to control the RX/TX switch:
// 1. using the LSB from the TX data (TXRXSWITCH_LSB)
+// only the LSB from RF chain set in the ACTIVE_RF register controls the switch on all the chains
// 2. using FPGA logic, based on switch_offset[0..3]
+// this mode is not tested well and should be used with care
#define DUPLEXMODE_MASK (1<<0)
#define DUPLEXMODE_FDD 0
#define DUPLEXMODE_TDD (1<<0)
@@ -330,6 +332,11 @@ typedef struct {
#define SWITCHSTATE_1 (1<<3)
#define TEST_ADACLOOP_MASK (1<<4)
#define TEST_ADACLOOP_EN (1<<4)
+#define RF_ACTIVE_MASK (15<<5)
+#define RF_ACTIVE_1 (1<<5)
+#define RF_ACTIVE_2 (2<<5)
+#define RF_ACTIVE_3 (4<<5)
+#define RF_ACTIVE_4 (8<<5)
typedef enum {
BW5,
diff --git a/targets/ARCH/EXMIMO/USERSPACE/LIB/openair0_lib.c b/targets/ARCH/EXMIMO/USERSPACE/LIB/openair0_lib.c
index df9900d3bc..238c94bd7e 100644
--- a/targets/ARCH/EXMIMO/USERSPACE/LIB/openair0_lib.c
+++ b/targets/ARCH/EXMIMO/USERSPACE/LIB/openair0_lib.c
@@ -296,6 +296,7 @@ int openair0_config(openair0_config_t *openair0_cfg, int UE_flag)
int ant, card;
int resampling_factor=2;
int rx_filter=RXLPF25, tx_filter=TXLPF25;
+ int ACTIVE_RF=0;
exmimo_config_t *p_exmimo_config;
exmimo_id_t *p_exmimo_id;
@@ -315,8 +316,6 @@ int openair0_config(openair0_config_t *openair0_cfg, int UE_flag)
else
p_exmimo_config->framing.eNB_flag = !UE_flag;
- p_exmimo_config->framing.tdd_config = DUPLEXMODE_FDD + TXRXSWITCH_LSB;
-
if (openair0_num_detected_cards==1)
p_exmimo_config->framing.multicard_syncmode=SYNCMODE_FREE;
else if (card==0)
@@ -355,6 +354,7 @@ int openair0_config(openair0_config_t *openair0_cfg, int UE_flag)
for (ant=0; ant<4; ant++) {
if (openair0_cfg[card].rx_freq[ant] || openair0_cfg[card].tx_freq[ant]) {
+ ACTIVE_RF += (1<rf.rf_mode[ant] = RF_MODE_BASE;
p_exmimo_config->rf.do_autocal[ant] = 1;//openair0_cfg[card].autocal[ant];
printf("card %d, antenna %d, autocal %d\n",card,ant,openair0_cfg[card].autocal[ant]);
@@ -408,6 +408,15 @@ int openair0_config(openair0_config_t *openair0_cfg, int UE_flag)
}
}
+ if (openair0_cfg[card].duplex_mode==duplex_mode_FDD) {
+ p_exmimo_config->framing.tdd_config = DUPLEXMODE_FDD;
+ printf("!!!!!setting FDD (tdd_config=%d)\n",p_exmimo_config->framing.tdd_config);
+ }
+ else {
+ p_exmimo_config->framing.tdd_config = DUPLEXMODE_TDD + TXRXSWITCH_LSB + ACTIVE_RF;
+ printf("!!!!!setting TDD (tdd_config=%d)\n",p_exmimo_config->framing.tdd_config);
+ }
+
ret = ioctl(openair0_fd, openair_DUMP_CONFIG, card);
if (ret!=0)
diff --git a/targets/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/sdr_expressmimo2_v10 b/targets/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/sdr_expressmimo2_v10
index 2889dfa80f..d79e46df76 100755
Binary files a/targets/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/sdr_expressmimo2_v10 and b/targets/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/sdr_expressmimo2_v10 differ
diff --git a/targets/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp b/targets/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp
index 0885ef6dd1..b12f7397f0 100644
--- a/targets/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp
+++ b/targets/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp
@@ -464,7 +464,7 @@ int openair0_dev_init_usrp(openair0_device* device, openair0_config_t *openair0_
break;
case 7680000:
openair0_cfg[0].samples_per_packet = 1024;
- openair0_cfg[0].tx_sample_advance = 103;
+ openair0_cfg[0].tx_sample_advance = 70;//103;
openair0_cfg[0].tx_scheduling_advance = 5*openair0_cfg[0].samples_per_packet;
break;
case 1920000:
@@ -479,13 +479,11 @@ int openair0_dev_init_usrp(openair0_device* device, openair0_config_t *openair0_
}
}
-
-
for(i=0;iusrp->get_rx_num_channels();i++) {
if (iusrp->set_rx_rate(openair0_cfg[0].sample_rate,i);
s->usrp->set_rx_bandwidth(openair0_cfg[0].rx_bw,i);
- printf("Setting rx freq/gain on channel %lu/%lu\n",i,s->usrp->get_rx_num_channels());
+ printf("Setting rx freq/gain on channel %lu/%lu : BW %f (readback %f)\n",i,s->usrp->get_rx_num_channels(),openair0_cfg[0].rx_bw/1e6,s->usrp->get_rx_bandwidth(i)/1e6);
s->usrp->set_rx_freq(openair0_cfg[0].rx_freq[i],i);
set_rx_gain_offset(&openair0_cfg[0],i);
@@ -506,7 +504,7 @@ int openair0_dev_init_usrp(openair0_device* device, openair0_config_t *openair0_
if (iusrp->set_tx_rate(openair0_cfg[0].sample_rate,i);
s->usrp->set_tx_bandwidth(openair0_cfg[0].tx_bw,i);
- printf("Setting tx freq/gain on channel %lu/%lu\n",i,s->usrp->get_tx_num_channels());
+ printf("Setting tx freq/gain on channel %lu/%lu: BW %f (readback %f)\n",i,s->usrp->get_tx_num_channels(),openair0_cfg[0].tx_bw/1e6,s->usrp->get_tx_bandwidth(i)/1e6);
s->usrp->set_tx_freq(openair0_cfg[0].tx_freq[i],i);
s->usrp->set_tx_gain(openair0_cfg[0].tx_gain[i],i);
}
diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band38.tm1.exmimo2.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band38.tm1.exmimo2.conf
index 0071b7d002..9444a6f95e 100644
--- a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band38.tm1.exmimo2.conf
+++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band38.tm1.exmimo2.conf
@@ -17,7 +17,7 @@ eNBs =
mobile_country_code = "208";
- mobile_network_code = "92";
+ mobile_network_code = "93";
////////// Physical parameters:
@@ -131,7 +131,7 @@ eNBs =
};
////////// MME parameters:
- mme_ip_address = ( { ipv4 = "192.168.13.11";
+ mme_ip_address = ( { ipv4 = "192.168.12.70";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
@@ -141,10 +141,10 @@ eNBs =
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
- ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.13.10/24";
+ ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.212/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
- ENB_IPV4_ADDRESS_FOR_S1U = "192.168.13.10/24";
+ ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.212/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf
index 212f341580..3ce32398f7 100644
--- a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf
+++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf
@@ -17,7 +17,7 @@ eNBs =
mobile_country_code = "208";
- mobile_network_code = "92";
+ mobile_network_code = "93";
////////// Physical parameters:
@@ -31,7 +31,7 @@ eNBs =
downlink_frequency = 2680000000L;
uplink_frequency_offset = -120000000;
Nid_cell = 0;
- N_RB_DL = 50;
+ N_RB_DL = 25;
Nid_cell_mbsfn = 0;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
@@ -131,7 +131,7 @@ eNBs =
};
////////// MME parameters:
- mme_ip_address = ( { ipv4 = "10.0.1.1";
+ mme_ip_address = ( { ipv4 = "192.168.12.171";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
@@ -140,11 +140,11 @@ eNBs =
NETWORK_INTERFACES :
{
- ENB_INTERFACE_NAME_FOR_S1_MME = "eth3";
- ENB_IPV4_ADDRESS_FOR_S1_MME = "10.0.1.229/24";
+ ENB_INTERFACE_NAME_FOR_S1_MME = "eth2";
+ ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.80/24";
- ENB_INTERFACE_NAME_FOR_S1U = "eth3";
- ENB_IPV4_ADDRESS_FOR_S1U = "10.0.1.229/24";
+ ENB_INTERFACE_NAME_FOR_S1U = "eth2";
+ ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.80/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf
index 2f11e42ba9..d8ea58910a 100644
--- a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf
+++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf
@@ -36,7 +36,7 @@ eNBs =
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 90;
- rx_gain = 120;
+ rx_gain = 132;
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
@@ -143,10 +143,10 @@ eNBs =
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
- ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.216/24";
+ ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.213/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
- ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.216/24";
+ ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.213/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf
index e864f47edb..6470b310f0 100644
--- a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf
+++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf
@@ -36,7 +36,7 @@ eNBs =
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 90;
- rx_gain = 120;
+ rx_gain = 132;
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf
index 8248f20927..4722040b07 100644
--- a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf
+++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf
@@ -30,12 +30,12 @@ eNBs =
downlink_frequency = 2660000000L;
uplink_frequency_offset = -120000000;
Nid_cell = 0;
- N_RB_DL = 100;
+ N_RB_DL = 25;
Nid_cell_mbsfn = 0;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 90;
- rx_gain = 119;
+ rx_gain = 132;
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf
index af9baf9e7a..de9298b49a 100644
--- a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf
+++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf
@@ -36,7 +36,7 @@ eNBs =
nb_antennas_tx = 2;
nb_antennas_rx = 2;
tx_gain = 90;
- rx_gain = 115;
+ rx_gain = 132;
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
@@ -132,7 +132,8 @@ eNBs =
};
////////// MME parameters:
- mme_ip_address = ( { ipv4 = "192.168.12.70";
+
+ mme_ip_address = ( { ipv4 = "192.168.12.11";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
@@ -142,10 +143,10 @@ eNBs =
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
- ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.212/24";
+ ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.213/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
- ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.212/24";
+ ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.213/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
diff --git a/targets/RT/USER/lte-softmodem.c b/targets/RT/USER/lte-softmodem.c
index 45625e7e73..2409f102a4 100644
--- a/targets/RT/USER/lte-softmodem.c
+++ b/targets/RT/USER/lte-softmodem.c
@@ -289,6 +289,8 @@ double bw = 10.0e6;
static int tx_max_power[MAX_NUM_CCs]; /* = {0,0}*/;
+int chain_offset=0;
+
#ifndef EXMIMO
char ref[128] = "internal";
char channels[128] = "0";
@@ -314,6 +316,7 @@ static LTE_DL_FRAME_PARMS *frame_parms[MAX_NUM_CCs];
int multi_thread=1;
uint32_t target_dl_mcs = 28; //maximum allowed mcs
uint32_t target_ul_mcs = 10;
+uint32_t timing_advance = 0;
uint8_t exit_missed_slots=1;
uint64_t num_missed_slots=0; // counter for the number of missed slots
@@ -418,7 +421,7 @@ void help (void) {
printf(" --ue-txgain set UE TX gain\n");
printf(" --ue-scan_carrier set UE to scan around carrier\n");
printf(" --loop-memory get softmodem (UE) to loop through memory instead of acquiring from HW\n");
- printf(" -C Set the downlink frequecny for all Component carrier\n");
+ printf(" -C Set the downlink frequency for all component carriers\n");
printf(" -d Enable soft scope and L1 and L2 stats (Xforms)\n");
printf(" -F Calibrate the EXMIMO borad, available files: exmimo2_2arxg.lime exmimo2_2brxg.lime \n");
printf(" -g Set the global log level, valide options: (9:trace, 8/7:debug, 6:info, 4:warn, 3:error)\n");
@@ -432,6 +435,7 @@ void help (void) {
printf(" -r Set the PRB, valid values: 6, 25, 50, 100 \n");
printf(" -S Skip the missed slots/subframes \n");
printf(" -t Set the maximum uplink MCS\n");
+ printf(" -T Set hardware to TDD mode (default: FDD). Used only with -U (otherwise set in config file).\n");
printf(" -U Set the lte softmodem as a UE\n");
printf(" -W Enable L2 wireshark messages on localhost \n");
printf(" -V Enable VCD (generated file will be located atopenair_dump_eNB.vcd, read it with target/RT/USER/eNB.gtkw\n");
@@ -966,6 +970,25 @@ void do_OFDM_mod_rt(int subframe,PHY_VARS_eNB *phy_vars_eNB)
phy_vars_eNB->lte_eNB_common_vars.txdata[0][aa][tx_offset++] = 0x00010001;
}
}
+
+ if ((((phy_vars_eNB->lte_frame_parms.tdd_config==0) ||
+ (phy_vars_eNB->lte_frame_parms.tdd_config==1) ||
+ (phy_vars_eNB->lte_frame_parms.tdd_config==2) ||
+ (phy_vars_eNB->lte_frame_parms.tdd_config==6)) &&
+ (subframe==0)) || (subframe==5)) {
+ // turn on tx switch N_TA_offset before
+ //LOG_D(HW,"subframe %d, time to switch to tx (N_TA_offset %d, slot_offset %d) \n",subframe,phy_vars_eNB->N_TA_offset,slot_offset);
+ for (i=0; iN_TA_offset; i++) {
+ tx_offset = (int)slot_offset+time_offset[aa]+i-phy_vars_eNB->N_TA_offset/2;
+ if (tx_offset<0)
+ tx_offset += LTE_NUMBER_OF_SUBFRAMES_PER_FRAME*phy_vars_eNB->lte_frame_parms.samples_per_tti;
+
+ if (tx_offset>=(LTE_NUMBER_OF_SUBFRAMES_PER_FRAME*phy_vars_eNB->lte_frame_parms.samples_per_tti))
+ tx_offset -= LTE_NUMBER_OF_SUBFRAMES_PER_FRAME*phy_vars_eNB->lte_frame_parms.samples_per_tti;
+
+ phy_vars_eNB->lte_eNB_common_vars.txdata[0][aa][tx_offset] = 0x00000000;
+ }
+ }
}
}
}
@@ -2037,7 +2060,7 @@ static void get_options (int argc, char **argv)
{NULL, 0, NULL, 0}
};
- while ((c = getopt_long (argc, argv, "C:dK:g:F:G:hqO:m:SUVRM:r:P:Ws:t:x:",long_options,NULL)) != -1) {
+ while ((c = getopt_long (argc, argv, "A:a:C:dK:g:F:G:hqO:m:SUVRM:r:P:Ws:t:Tx:",long_options,NULL)) != -1) {
switch (c) {
case LONG_OPTION_MAXPOWER:
tx_max_power[0]=atoi(optarg);
@@ -2112,6 +2135,10 @@ static void get_options (int argc, char **argv)
#endif
break;
+ case 'A':
+ timing_advance = atoi (optarg);
+ break;
+
case 'C':
for (CC_id=0; CC_id 2 (%d) not supported for the moment\n",transmission_mode);
exit(-1);
}
-
break;
+
+ case 'T':
+ for (CC_id=0; CC_idframe_type = TDD;
+ break;
+
case 'h':
help ();
exit (-1);
@@ -2463,12 +2499,10 @@ int main( int argc, char **argv )
memset(tx_max_power,0,sizeof(int)*MAX_NUM_CCs);
set_latency_target();
-
-
for (CC_id=0; CC_idframe_type = FDD; /* TDD */
+ frame_parms[CC_id]->frame_type = FDD;
frame_parms[CC_id]->tdd_config = 3;
frame_parms[CC_id]->tdd_config_S = 0;
frame_parms[CC_id]->N_RB_DL = 100;
@@ -2765,7 +2799,7 @@ int main( int argc, char **argv )
PHY_vars_eNB_g[0] = malloc(sizeof(PHY_VARS_eNB*));
for (CC_id=0; CC_idNid_cell,cooperation_flag,transmission_mode,abstraction_flag);
PHY_vars_eNB_g[0][CC_id]->CC_id = CC_id;
#ifndef OPENAIR2
@@ -2816,7 +2850,7 @@ int main( int argc, char **argv )
}
#else
- //already taken care of in lte-softmodem
+ //already taken care of in lte-softmodem.c
PHY_vars_eNB_g[0][CC_id]->N_TA_offset = 0;
#endif
@@ -2854,8 +2888,8 @@ int main( int argc, char **argv )
} else if (frame_parms[0]->N_RB_DL == 25) {
openair0_cfg[card].sample_rate=7.68e6;
openair0_cfg[card].samples_per_frame = 76800;
- openair0_cfg[card].tx_bw = 2.5e6;
- openair0_cfg[card].rx_bw = 2.5e6;
+ openair0_cfg[card].tx_bw = 5e6;
+ openair0_cfg[card].rx_bw = 5e6;
} else if (frame_parms[0]->N_RB_DL == 6) {
openair0_cfg[card].sample_rate=1.92e6;
@@ -2863,7 +2897,12 @@ int main( int argc, char **argv )
openair0_cfg[card].tx_bw = 1.5e6;
openair0_cfg[card].rx_bw = 1.5e6;
}
-
+
+ if (frame_parms[0]->frame_type==TDD)
+ openair0_cfg[card].duplex_mode = duplex_mode_TDD;
+ else //FDD
+ openair0_cfg[card].duplex_mode = duplex_mode_FDD;
+
#ifdef ETHERNET
//calib needed
@@ -3025,13 +3064,13 @@ int main( int argc, char **argv )
for(CC_id=0; CC_id