[FHI72] Add Liteon FR2 support in the FHI tutorial and a reference config file
This commit is contained in:
Teodora
@@ -565,12 +565,6 @@ dl_tuning_special_slot=0x13b6
|
|||||||
|
|
||||||
#### LITEON
|
#### LITEON
|
||||||
|
|
||||||
The OAI configuration file [`gnb.sa.band78.273prb.fhi72.4x4-liteon.conf`](../targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.273prb.fhi72.4x4-liteon.conf) corresponds to:
|
|
||||||
- TDD pattern `DDDSU`, 2.5ms
|
|
||||||
- Bandwidth 100MHz
|
|
||||||
- MTU 1500
|
|
||||||
- MTU 9216: v02.00.10
|
|
||||||
|
|
||||||
##### RU configuration
|
##### RU configuration
|
||||||
|
|
||||||
SSH to the unit as user `user`. Write `enable` in the terminal to enter the configuration console; the password should be in the user guide. Use the command `show oru-status` to check the RU status. The output should be similar to:
|
SSH to the unit as user `user`. Write `enable` in the terminal to enter the configuration console; the password should be in the user guide. Use the command `show oru-status` to check the RU status. The output should be similar to:
|
||||||
@@ -593,7 +587,15 @@ Once the RU is PTP synced, and RF state and DPD are `Ready`, write `configure te
|
|||||||
- DU MAC address
|
- DU MAC address
|
||||||
...
|
...
|
||||||
|
|
||||||
The configuration mode example:
|
###### FR1
|
||||||
|
|
||||||
|
The OAI configuration file [`gnb.sa.band78.273prb.fhi72.4x4-liteon.conf`](../targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.273prb.fhi72.4x4-liteon.conf) corresponds to:
|
||||||
|
- TDD pattern `DDDSU`, 2.5ms
|
||||||
|
- Bandwidth 100MHz
|
||||||
|
- MTU 1500
|
||||||
|
- MTU 9216: v02.00.10
|
||||||
|
|
||||||
|
The RU configuration mode example:
|
||||||
```bash
|
```bash
|
||||||
compression-bit 9 # set IQ bitwidth for PxSCH/PRACH
|
compression-bit 9 # set IQ bitwidth for PxSCH/PRACH
|
||||||
eAXC_id 4 5 6 7 # set PRACH eAxC IDs
|
eAXC_id 4 5 6 7 # set PRACH eAxC IDs
|
||||||
@@ -601,6 +603,21 @@ jumboframe 1 # enable jumbo frame
|
|||||||
...
|
...
|
||||||
```
|
```
|
||||||
|
|
||||||
|
###### FR2
|
||||||
|
|
||||||
|
The OAI configuration file [`gnb.sa.band257.66prb.fhi72.2x2-liteon.conf`](../targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band257.66prb.fhi72.2x2-liteon.conf) corresponds to:
|
||||||
|
- TDD pattern `DDDDDDDSUU`, 1.25ms
|
||||||
|
- Bandwidth 100MHz
|
||||||
|
- FW v02.00.07
|
||||||
|
- DL uses jumbo frame, UL uses standard MTU of 1500 bytes
|
||||||
|
|
||||||
|
The RU configuration mode example:
|
||||||
|
```bash
|
||||||
|
compression-bit 8 # set IQ bitwidth for PxSCH/PRACH
|
||||||
|
eAXC_id 0 1 # set PRACH eAxC IDs
|
||||||
|
...
|
||||||
|
```
|
||||||
|
|
||||||
#### VVDN LPRU
|
#### VVDN LPRU
|
||||||
|
|
||||||
**Version 3.x**
|
**Version 3.x**
|
||||||
|
|||||||
@@ -0,0 +1,281 @@
|
|||||||
|
Active_gNBs = ( "inria-gnb");
|
||||||
|
# Asn1_verbosity, choice in: none, info, annoying
|
||||||
|
Asn1_verbosity = "none";
|
||||||
|
|
||||||
|
gNBs =
|
||||||
|
(
|
||||||
|
{
|
||||||
|
////////// Identification parameters:
|
||||||
|
gNB_ID = 0xe99;
|
||||||
|
cell_type = "CELL_MACRO_GNB";
|
||||||
|
|
||||||
|
gNB_name = "inria-gnb";
|
||||||
|
|
||||||
|
// Tracking area code, 0x0000 and 0xfffe are reserved values
|
||||||
|
tracking_area_code = 1;
|
||||||
|
plmn_list = ({ mcc = 001; mnc = 01; mnc_length = 2; snssaiList = ( { sst = 1; }); });
|
||||||
|
|
||||||
|
nr_cellid = 1;
|
||||||
|
|
||||||
|
////////// Physical parameters:
|
||||||
|
|
||||||
|
pdsch_AntennaPorts_XP = 2;
|
||||||
|
pusch_AntennaPorts = 2;
|
||||||
|
maxMIMO_layers = 2;
|
||||||
|
do_CSIRS = 1;
|
||||||
|
do_SRS = 0;
|
||||||
|
min_rxtxtime = 4;
|
||||||
|
|
||||||
|
servingCellConfigCommon = (
|
||||||
|
{
|
||||||
|
#spCellConfigCommon
|
||||||
|
|
||||||
|
physCellId = 0;
|
||||||
|
|
||||||
|
# downlinkConfigCommon
|
||||||
|
#frequencyInfoDL
|
||||||
|
# center frequency = 28701.12 MHz
|
||||||
|
# selected SSB frequency = 28691.04 MHz
|
||||||
|
absoluteFrequencySSB = 2090683;
|
||||||
|
dl_frequencyBand = 257;
|
||||||
|
# frequency point A = 28653.6 MHz
|
||||||
|
dl_absoluteFrequencyPointA = 2090059;
|
||||||
|
#scs-SpecificCarrierList
|
||||||
|
dl_offstToCarrier = 0;
|
||||||
|
# subcarrierSpacing
|
||||||
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
||||||
|
dl_subcarrierSpacing = 3;
|
||||||
|
dl_carrierBandwidth = 66;
|
||||||
|
#initialDownlinkBWP
|
||||||
|
#genericParameters
|
||||||
|
initialDLBWPlocationAndBandwidth = 17875;
|
||||||
|
# subcarrierSpacing
|
||||||
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
||||||
|
initialDLBWPsubcarrierSpacing = 3;
|
||||||
|
#pdcch-ConfigCommon
|
||||||
|
initialDLBWPcontrolResourceSetZero = 2;
|
||||||
|
initialDLBWPsearchSpaceZero = 0;
|
||||||
|
|
||||||
|
#uplinkConfigCommon
|
||||||
|
#frequencyInfoUL
|
||||||
|
ul_frequencyBand = 257;
|
||||||
|
#scs-SpecificCarrierList
|
||||||
|
ul_offstToCarrier = 0;
|
||||||
|
# subcarrierSpacing
|
||||||
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
||||||
|
ul_subcarrierSpacing = 3;
|
||||||
|
ul_carrierBandwidth = 66;
|
||||||
|
pMax = 20;
|
||||||
|
#initialUplinkBWP
|
||||||
|
#genericParameters
|
||||||
|
initialULBWPlocationAndBandwidth = 17875;
|
||||||
|
# subcarrierSpacing
|
||||||
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
||||||
|
initialULBWPsubcarrierSpacing = 3;
|
||||||
|
#rach-ConfigCommon
|
||||||
|
#rach-ConfigGeneric
|
||||||
|
prach_ConfigurationIndex = 135;
|
||||||
|
#prach_msg1_FDM
|
||||||
|
#0 = one, 1=two, 2=four, 3=eight
|
||||||
|
prach_msg1_FDM = 0;
|
||||||
|
prach_msg1_FrequencyStart = 0;
|
||||||
|
zeroCorrelationZoneConfig = 15;
|
||||||
|
preambleReceivedTargetPower = -118;
|
||||||
|
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
|
||||||
|
preambleTransMax = 8;
|
||||||
|
#powerRampingStep
|
||||||
|
# 0=dB0,1=dB2,2=dB4,3=dB6
|
||||||
|
powerRampingStep = 2;
|
||||||
|
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
|
||||||
|
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
|
||||||
|
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 3;
|
||||||
|
#one (0..15) 4,8,12,16,...60,64
|
||||||
|
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 15;
|
||||||
|
#ra_ContentionResolutionTimer
|
||||||
|
#(0..7) 8,16,24,32,40,48,56,64
|
||||||
|
ra_ContentionResolutionTimer = 7;
|
||||||
|
rsrp_ThresholdSSB = 19;
|
||||||
|
#prach-RootSequenceIndex_PR
|
||||||
|
#1 = 839, 2 = 139
|
||||||
|
prach_RootSequenceIndex_PR = 2;
|
||||||
|
prach_RootSequenceIndex = 1;
|
||||||
|
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
|
||||||
|
#
|
||||||
|
msg1_SubcarrierSpacing = 3,
|
||||||
|
# restrictedSetConfig
|
||||||
|
# 0=unrestricted, 1=restricted type A, 2=restricted type B
|
||||||
|
restrictedSetConfig = 0,
|
||||||
|
|
||||||
|
# this is the offset between the last PRACH preamble power and the Msg3 PUSCH, 2 times the field value in dB
|
||||||
|
msg3_DeltaPreamble = 0;
|
||||||
|
p0_NominalWithGrant = -90;
|
||||||
|
|
||||||
|
# pucch-ConfigCommon setup :
|
||||||
|
# pucchGroupHopping
|
||||||
|
# 0 = neither, 1= group hopping, 2=sequence hopping
|
||||||
|
pucchGroupHopping = 0;
|
||||||
|
hoppingId = 40;
|
||||||
|
p0_nominal = -90;
|
||||||
|
|
||||||
|
ssb_PositionsInBurst_Bitmap = 1;
|
||||||
|
|
||||||
|
# ssb_periodicityServingCell
|
||||||
|
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
|
||||||
|
ssb_periodicityServingCell = 1;
|
||||||
|
|
||||||
|
# dmrs_TypeA_position
|
||||||
|
# 0 = pos2, 1 = pos3
|
||||||
|
dmrs_TypeA_Position = 0;
|
||||||
|
|
||||||
|
# subcarrierSpacing
|
||||||
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
||||||
|
subcarrierSpacing = 3;
|
||||||
|
|
||||||
|
|
||||||
|
#tdd-UL-DL-ConfigurationCommon
|
||||||
|
# subcarrierSpacing
|
||||||
|
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
|
||||||
|
referenceSubcarrierSpacing = 3;
|
||||||
|
# pattern1
|
||||||
|
# dl_UL_TransmissionPeriodicity
|
||||||
|
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
|
||||||
|
dl_UL_TransmissionPeriodicity = 3;
|
||||||
|
nrofDownlinkSlots = 7;
|
||||||
|
nrofDownlinkSymbols = 6;
|
||||||
|
nrofUplinkSlots = 2;
|
||||||
|
nrofUplinkSymbols = 4;
|
||||||
|
|
||||||
|
ssPBCH_BlockPower = 0;
|
||||||
|
}
|
||||||
|
);
|
||||||
|
|
||||||
|
|
||||||
|
# ------- SCTP definitions
|
||||||
|
SCTP :
|
||||||
|
{
|
||||||
|
# Number of streams to use in input/output
|
||||||
|
SCTP_INSTREAMS = 2;
|
||||||
|
SCTP_OUTSTREAMS = 2;
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
////////// AMF parameters:
|
||||||
|
amf_ip_address = ({ ipv4 = "172.21.6.4"; });
|
||||||
|
|
||||||
|
NETWORK_INTERFACES :
|
||||||
|
{
|
||||||
|
GNB_IPV4_ADDRESS_FOR_NG_AMF = "172.21.16.51";
|
||||||
|
GNB_IPV4_ADDRESS_FOR_NGU = "172.21.16.51";
|
||||||
|
GNB_PORT_FOR_S1U = 2152; # Spec 2152
|
||||||
|
};
|
||||||
|
}
|
||||||
|
);
|
||||||
|
|
||||||
|
MACRLCs = (
|
||||||
|
{
|
||||||
|
num_cc = 1;
|
||||||
|
tr_s_preference = "local_L1";
|
||||||
|
tr_n_preference = "local_RRC";
|
||||||
|
pusch_TargetSNRx10 = 200;
|
||||||
|
pucch_TargetSNRx10 = 200;
|
||||||
|
pusch_FailureThres = 1000;
|
||||||
|
#ul_bler_target_upper =.02;
|
||||||
|
#ul_bler_target_lower =.01;
|
||||||
|
#dl_bler_target_upper =.15;
|
||||||
|
#dl_bler_target_lower =.05
|
||||||
|
set_analog_beamforming = "lophy";
|
||||||
|
beam_duration = 1;
|
||||||
|
beams_per_period = 1;
|
||||||
|
beam_weights = [1];
|
||||||
|
}
|
||||||
|
);
|
||||||
|
|
||||||
|
L1s = (
|
||||||
|
{
|
||||||
|
num_cc = 1;
|
||||||
|
tr_n_preference = "local_mac";
|
||||||
|
prach_dtx_threshold = 250;
|
||||||
|
pucch0_dtx_threshold = 100;
|
||||||
|
pusch_dtx_threshold = -200;
|
||||||
|
max_ldpc_iterations = 10;
|
||||||
|
tx_amp_backoff_dB = 18;
|
||||||
|
L1_rx_thread_core = 10;
|
||||||
|
L1_tx_thread_core = 11;
|
||||||
|
phase_compensation = 1;
|
||||||
|
|
||||||
|
}
|
||||||
|
);
|
||||||
|
|
||||||
|
RUs = (
|
||||||
|
{
|
||||||
|
local_rf = "no";
|
||||||
|
nb_tx = 2;
|
||||||
|
nb_rx = 2;
|
||||||
|
att_tx = 0
|
||||||
|
att_rx = 0;
|
||||||
|
bands = [257];
|
||||||
|
nr_scs_for_raster = 3;
|
||||||
|
max_pdschReferenceSignalPower = -40;
|
||||||
|
max_rxgain = 60;
|
||||||
|
#sf_extension = 0;
|
||||||
|
eNB_instances = [0];
|
||||||
|
ru_thread_core = 9;
|
||||||
|
sl_ahead = 10;
|
||||||
|
tr_preference = "raw_if4p5";
|
||||||
|
do_precoding = 0;
|
||||||
|
}
|
||||||
|
);
|
||||||
|
|
||||||
|
security = {
|
||||||
|
# preferred ciphering algorithms
|
||||||
|
# the first one of the list that an UE supports in chosen
|
||||||
|
# valid values: nea0, nea1, nea2, nea3
|
||||||
|
ciphering_algorithms = ( "nea0" );
|
||||||
|
|
||||||
|
# preferred integrity algorithms
|
||||||
|
# the first one of the list that an UE supports in chosen
|
||||||
|
# valid values: nia0, nia1, nia2, nia3
|
||||||
|
integrity_algorithms = ( "nia2", "nia0" );
|
||||||
|
|
||||||
|
# setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
|
||||||
|
# what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
|
||||||
|
drb_ciphering = "yes";
|
||||||
|
drb_integrity = "no";
|
||||||
|
};
|
||||||
|
|
||||||
|
log_config :
|
||||||
|
{
|
||||||
|
global_log_level = "info";
|
||||||
|
hw_log_level = "info";
|
||||||
|
phy_log_level = "info";
|
||||||
|
mac_log_level = "info";
|
||||||
|
rlc_log_level = "info";
|
||||||
|
pdcp_log_level = "info";
|
||||||
|
rrc_log_level = "info";
|
||||||
|
ngap_log_level = "info";
|
||||||
|
f1ap_log_level = "info";
|
||||||
|
};
|
||||||
|
|
||||||
|
fhi_72 = {
|
||||||
|
dpdk_devices = ("0000:c1:11.0", "0000:c1:11.1"); # one VF can be used as well
|
||||||
|
system_core = 6;
|
||||||
|
io_core = 7;
|
||||||
|
worker_cores = (8);
|
||||||
|
ru_addr = ("E8:C7:4F:1E:C7:5B", "E8:C7:4F:1E:C7:5B");
|
||||||
|
mtu = 9216;
|
||||||
|
fh_config = ({
|
||||||
|
RunSlotPrbMapBySymbol = 1;
|
||||||
|
T1a_cp_dl = (110, 111);
|
||||||
|
T1a_cp_ul = (69, 70);
|
||||||
|
T1a_up = (30, 64);
|
||||||
|
Ta4 = (30, 64);
|
||||||
|
ru_config = {
|
||||||
|
iq_width = 8;
|
||||||
|
iq_width_prach = 8;
|
||||||
|
};
|
||||||
|
prach_config = {
|
||||||
|
eAxC_offset = 0;
|
||||||
|
kbar = 0;
|
||||||
|
};
|
||||||
|
});
|
||||||
|
};
|
||||||
Reference in New Issue
Block a user