maki/openairinterface5g
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Merge branch 'develop' into enhancement-60-exmimo-tdd

Browse Source
This commit is contained in:
Rohit Gupta
2015-12-14 18:37:00 +01:00
parent 6c95dafc80 d7fb4fa8de
commit b085d57710
44 changed files with 5692 additions and 753 deletions
Download Patch File Download Diff File Expand all files Collapse all files
targets/ARCH/COMMON/common_lib.c
+1 -1
View File
@@ -52,7 +52,7 @@ int openair0_device_init(openair0_device *device, openair0_config_t *openair0_cf
openair0_dev_init_exmimo(device, openair0_cfg);
printf("openair0_dev_init_exmimo...\n");
#elif OAI_USRP
device->type=USRP_IF;
device->type=USRP_B200_IF;
openair0_dev_init_usrp(device, openair0_cfg);
printf("openair0_dev_init_usrp ...\n");
#elif OAI_BLADERF
targets/ARCH/COMMON/common_lib.h
+12 -6
View File
@@ -91,10 +91,10 @@ typedef struct {
double sample_rate;
//! number of samples per RX/TX packet (USRP + Ethernet)
int samples_per_packet;
// delay in sending samples (write) due to hardware access, softmodem processing and fronthaul delay if exist
int tx_delay;
//! adjust the position of the samples after delay when sending
unsigned int tx_forward_nsamps;
//! delay in sending samples (write) due to hardware access, softmodem processing and fronthaul delay if exist
int tx_scheduling_advance;
//! offset in samples between TX and RX paths
int tx_sample_advance;
//! number of RX channels (=RX antennas)
int rx_num_channels;
//! number of TX channels (=TX antennas)
@@ -105,6 +105,10 @@ typedef struct {
//! \brief Center frequency in Hz for TX.
//! index: [0..rx_num_channels[ !!! see lte-ue.c:427 FIXME iterates over rx_num_channels
double tx_freq[4];
//! \brief Pointer to Calibration table for RX gains
rx_gain_calib_table_t *rx_gain_calib_table;
//! mode for rxgain (ExpressMIMO2)
rx_gain_t rxg_mode[4];
//! \brief Gain for RX in dB.
@@ -154,8 +158,10 @@ typedef enum {
ETH_IF,
/*!\brief device is ExpressMIMO */
EXMIMO_IF,
/*!\brief device is USRP*/
USRP_IF,
/*!\brief device is USRP B200/B210*/
USRP_B200_IF,
/*!\brief device is USRP X300/X310*/
USRP_X300_IF,
/*!\brief device is BLADE RF*/
BLADERF_IF,
/*!\brief device is NONE*/
targets/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp
+112 -22
View File
@@ -171,31 +171,45 @@ static int trx_usrp_read(openair0_device *device, openair0_timestamp *ptimestamp
#endif
if (cc>1) {
if (device->type == USRP_B200_IF) {
if (cc>1) {
// receive multiple channels (e.g. RF A and RF B)
std::vector<void *> buff_ptrs;
for (int i=0;i<cc;i++) buff_ptrs.push_back(buff_tmp[i]);
samples_received = s->rx_stream->recv(buff_ptrs, nsamps, s->rx_md);
} else {
std::vector<void *> buff_ptrs;
for (int i=0;i<cc;i++) buff_ptrs.push_back(buff_tmp[i]);
samples_received = s->rx_stream->recv(buff_ptrs, nsamps, s->rx_md);
} else {
// receive a single channel (e.g. from connector RF A)
samples_received = s->rx_stream->recv(buff_tmp[0], nsamps, s->rx_md);
}
samples_received = s->rx_stream->recv(buff_tmp[0], nsamps, s->rx_md);
}
// bring RX data into 12 LSBs for softmodem RX
for (int i=0;i<cc;i++) {
for (int j=0; j<nsamps2; j++) {
for (int i=0;i<cc;i++) {
for (int j=0; j<nsamps2; j++) {
#if defined(__x86_64__) || defined(__i386__)
#ifdef __AVX2__
((__m256i *)buff[i])[j] = _mm256_srai_epi16(buff_tmp[i][j],4);
((__m256i *)buff[i])[j] = _mm256_srai_epi16(buff_tmp[i][j],4);
#else
((__m128i *)buff[i])[j] = _mm_srai_epi16(buff_tmp[i][j],4);
((__m128i *)buff[i])[j] = _mm_srai_epi16(buff_tmp[i][j],4);
#endif
#elif defined(__arm__)
((int16x8_t*)buff[i])[j] = vshrq_n_s16(buff_tmp[i][j],4);
((int16x8_t*)buff[i])[j] = vshrq_n_s16(buff_tmp[i][j],4);
#endif
}
}
} else if (device->type == USRP_X300_IF) {
if (cc>1) {
// receive multiple channels (e.g. RF A and RF B)
std::vector<void *> buff_ptrs;
for (int i=0;i<cc;i++) buff_ptrs.push_back(buff[i]);
samples_received = s->rx_stream->recv(buff_ptrs, nsamps, s->rx_md);
} else {
// receive a single channel (e.g. from connector RF A)
samples_received = s->rx_stream->recv(buff[0], nsamps, s->rx_md);
}
}
if (samples_received < nsamps) {
printf("[recv] received %d samples out of %d\n",samples_received,nsamps);
@@ -279,7 +293,7 @@ int trx_usrp_set_gains(openair0_device* device,
exit(-1);
}
s->usrp->set_rx_gain(openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0]);
printf("Setting USRP RX gain to %f\n", openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0]);
printf("Setting USRP RX gain to %f (rx_gain %f,gain_range.stop() %f)\n", openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0],openair0_cfg[0].rx_gain[0],gain_range.stop());
return(0);
}
@@ -289,7 +303,7 @@ int trx_usrp_stop(int card) {
}
rx_gain_calib_table_t calib_table[] = {
rx_gain_calib_table_t calib_table_b210[] = {
{3500000000.0,46.0},
{2660000000.0,53.0},
{2300000000.0,54.0},
@@ -297,19 +311,29 @@ rx_gain_calib_table_t calib_table[] = {
{816000000.0,62.0},
{-1,0}};
rx_gain_calib_table_t calib_table_x310[] = {
{3500000000.0,77.0},
{2660000000.0,80.0},
{2300000000.0,81.0},
{1880000000.0,82.0},
{816000000.0,85.0},
{-1,0}};
void set_rx_gain_offset(openair0_config_t *openair0_cfg, int chain_index) {
int i=0;
// loop through calibration table to find best adjustment factor for RX frequency
double min_diff = 6e9,diff;
while (calib_table[i].freq>0) {
diff = fabs(openair0_cfg->rx_freq[chain_index] - calib_table[i].freq);
while (openair0_cfg->rx_gain_calib_table[i].freq>0) {
diff = fabs(openair0_cfg->rx_freq[chain_index] - openair0_cfg->rx_gain_calib_table[i].freq);
printf("cal %d: freq %f, offset %f, diff %f\n",
i,calib_table[i].freq,calib_table[i].offset,diff);
i,
openair0_cfg->rx_gain_calib_table[i].freq,
openair0_cfg->rx_gain_calib_table[i].offset,diff);
if (min_diff > diff) {
min_diff = diff;
openair0_cfg->rx_gain_offset[chain_index] = calib_table[i].offset;
openair0_cfg->rx_gain_offset[chain_index] = openair0_cfg->rx_gain_calib_table[i].offset;
}
i++;
}
@@ -372,9 +396,43 @@ int openair0_dev_init_usrp(openair0_device* device, openair0_config_t *openair0_
// lock mboard clocks
s->usrp->set_clock_source("internal");
//Setting device type to USRP X300/X310
device->type=USRP_X300_IF;
// this is not working yet, master clock has to be set via constructor
// set master clock rate and sample rate for tx & rx for streaming
//s->usrp->set_master_clock_rate(usrp_master_clock);
openair0_cfg[0].rx_gain_calib_table = calib_table_x310;
switch ((int)openair0_cfg[0].sample_rate) {
case 30720000:
// from usrp_time_offset
openair0_cfg[0].samples_per_packet = 2048;
openair0_cfg[0].tx_sample_advance = 15;
openair0_cfg[0].tx_scheduling_advance = 8*openair0_cfg[0].samples_per_packet;
break;
case 15360000:
openair0_cfg[0].samples_per_packet = 2048;
openair0_cfg[0].tx_sample_advance = 45;
openair0_cfg[0].tx_scheduling_advance = 5*openair0_cfg[0].samples_per_packet;
break;
case 7680000:
openair0_cfg[0].samples_per_packet = 1024;
openair0_cfg[0].tx_sample_advance = 50;
openair0_cfg[0].tx_scheduling_advance = 5*openair0_cfg[0].samples_per_packet;
break;
case 1920000:
openair0_cfg[0].samples_per_packet = 256;
openair0_cfg[0].tx_sample_advance = 50;
openair0_cfg[0].tx_scheduling_advance = 8*openair0_cfg[0].samples_per_packet;
break;
default:
printf("Error: unknown sampling rate %f\n",openair0_cfg[0].sample_rate);
exit(-1);
break;
}
} else {
printf("Found USRP B200");
s->usrp = uhd::usrp::multi_usrp::make(args);
@@ -386,10 +444,42 @@ int openair0_dev_init_usrp(openair0_device* device, openair0_config_t *openair0_
// // lock mboard clocks
// s->usrp->set_clock_source("internal");
// set master clock rate and sample rate for tx & rx for streaming
device->type = USRP_B200_IF;
s->usrp->set_master_clock_rate(30.72e6);
openair0_cfg[0].rx_gain_calib_table = calib_table_b210;
switch ((int)openair0_cfg[0].sample_rate) {
case 30720000:
// from usrp_time_offset
openair0_cfg[0].samples_per_packet = 2048;
openair0_cfg[0].tx_sample_advance = 115;
openair0_cfg[0].tx_scheduling_advance = 11*openair0_cfg[0].samples_per_packet;
break;
case 15360000:
openair0_cfg[0].samples_per_packet = 2048;
openair0_cfg[0].tx_sample_advance = 113;
openair0_cfg[0].tx_scheduling_advance = 5*openair0_cfg[0].samples_per_packet;
break;
case 7680000:
openair0_cfg[0].samples_per_packet = 1024;
openair0_cfg[0].tx_sample_advance = 103;
openair0_cfg[0].tx_scheduling_advance = 5*openair0_cfg[0].samples_per_packet;
break;
case 1920000:
openair0_cfg[0].samples_per_packet = 256;
openair0_cfg[0].tx_sample_advance = 40;
openair0_cfg[0].tx_scheduling_advance = 8*openair0_cfg[0].samples_per_packet;
break;
default:
printf("Error: unknown sampling rate %f\n",openair0_cfg[0].sample_rate);
exit(-1);
break;
}
}
for(i=0;i<s->usrp->get_rx_num_channels();i++) {
if (i<openair0_cfg[0].rx_num_channels) {