modify the ip address struct in f1 setup req for DU

openair2/COMMON/f1ap_messages_types.h

@@ -51,6 +51,13 @@
 // Note this should be 512 from maxval in 38.473
 #define F1AP_MAX_NB_CELLS 2
 
+typedef struct f1ap_net_ip_address_s {
+  unsigned ipv4:1;
+  unsigned ipv6:1;
+  char ipv4_address[16];
+  char ipv6_address[46];
+} f1ap_net_ip_address_t;
+
 typedef struct f1ap_cu_setup_req_s {
    //
 } f1ap_cu_setup_req_t;
@@ -60,8 +67,8 @@ typedef struct f1ap_setup_req_s {
   // Midhaul networking parameters
 
   /* The eNB IP address to bind */
-  char CU_ipv4_address[16];
+  f1ap_net_ip_address_t CU_f1_ip_address;
-  int CU_port;
+  f1ap_net_ip_address_t DU_f1_ip_address;
 
   /* Number of SCTP streams used for a mme association */
   uint16_t sctp_in_streams;

openair2/ENB_APP/enb_app.c

@@ -130,7 +130,6 @@ static uint32_t eNB_app_register(ngran_node_t node_type,uint32_t enb_id_start, u
   for (enb_id = enb_id_start; (enb_id < enb_id_end) ; enb_id++) {
     {
       if (node_type == ngran_eNB_DU) { // F1AP registration
-
         // configure F1AP here for F1C
         LOG_I(ENB_APP,"ngran_eNB_DU: Allocating ITTI message for F1AP_SETUP_REQ\n");
         msg_p = itti_alloc_new_message (TASK_ENB_APP, F1AP_SETUP_REQ);
@@ -154,10 +153,7 @@ static uint32_t eNB_app_register(ngran_node_t node_type,uint32_t enb_id_start, u
         itti_send_msg_to_task (TASK_S1AP, ENB_MODULE_ID_TO_INSTANCE(enb_id), msg_p);
       }
 
-
-      
       register_enb_pending++;
-    
     }
   }
 

openair2/ENB_APP/enb_config.c

@@ -2407,12 +2407,23 @@ int RCconfig_DU_F1(MessageDef *msg_p, uint32_t i) {
                     F1AP_SETUP_REQ (msg_p).mnc_digit_length[k]);
 	
         LOG_I(ENB_APP,"F1AP: CU_ip4_address %s\n",RC.mac[k]->eth_params_n.remote_addr);
-	LOG_I(ENB_APP,"FIAP: CU_ip4_address %p, strlen %d\n",F1AP_SETUP_REQ (msg_p).CU_ipv4_address,(int)strlen(RC.mac[k]->eth_params_n.remote_addr));
+        LOG_I(ENB_APP,"FIAP: CU_ip4_address %p, strlen %d\n",F1AP_SETUP_REQ (msg_p).CU_f1_ip_address.ipv4_address,(int)strlen(RC.mac[k]->eth_params_n.remote_addr));
+ 	
+        F1AP_SETUP_REQ (msg_p).CU_f1_ip_address.ipv6 = 0;
+        F1AP_SETUP_REQ (msg_p).CU_f1_ip_address.ipv4 = 1;
+        //strcpy(F1AP_SETUP_REQ (msg_p).CU_f1_ip_address.ipv6_address, "");
+        strcpy(F1AP_SETUP_REQ (msg_p).CU_f1_ip_address.ipv4_address, RC.mac[k]->eth_params_n.my_addr);
+
+        LOG_I(ENB_APP,"F1AP: DU_ip4_address %s\n",RC.mac[k]->eth_params_n.my_addr);
+        LOG_I(ENB_APP,"FIAP: DU_ip4_address %p, strlen %d\n",F1AP_SETUP_REQ (msg_p).DU_f1_ip_address.ipv4_address,(int)strlen(RC.mac[k]->eth_params_n.my_addr));
+  
+        F1AP_SETUP_REQ (msg_p).DU_f1_ip_address.ipv6 = 0;
+        F1AP_SETUP_REQ (msg_p).DU_f1_ip_address.ipv4 = 1;
+        //strcpy(F1AP_SETUP_REQ (msg_p).DU_f1_ip_address.ipv6_address, "");
+        strcpy(F1AP_SETUP_REQ (msg_p).DU_f1_ip_address.ipv4_address, RC.mac[k]->eth_params_n.remote_addr);
 
-	strcpy(F1AP_SETUP_REQ (msg_p).CU_ipv4_address,
-	       RC.mac[k]->eth_params_n.remote_addr);
         //strcpy(F1AP_SETUP_REQ (msg_p).CU_ip_address[l].ipv6_address,*(F1ParamList.paramarray[l][ENB_CU_IPV6_ADDRESS_IDX].strptr));
-	F1AP_SETUP_REQ (msg_p).CU_port = RC.mac[k]->eth_params_n.remote_portc;
+        //F1AP_SETUP_REQ (msg_p).CU_port = RC.mac[k]->eth_params_n.remote_portc; // maybe we dont need it
       
         sprintf(aprefix,"%s.[%i].%s",ENB_CONFIG_STRING_ENB_LIST,k,ENB_CONFIG_STRING_SCTP_CONFIG);
         config_get( SCTPParams,sizeof(SCTPParams)/sizeof(paramdef_t),aprefix); 
@@ -2470,9 +2481,9 @@ int RCconfig_DU_F1(MessageDef *msg_p, uint32_t i) {
         F1AP_SETUP_REQ (msg_p).sib1[k]                                       = rrc->carrier[0].SIB1;
 
         break;
-      }
+      } // if
-    }
+    } // for
-  }
+  } // if
 
   return 0;
 

openair2/F1AP/CU_F1AP.c

@@ -113,7 +113,7 @@ void CU_send_sctp_init_req(instance_t enb_id) {
   MessageDef  *message_p = NULL;
 
   message_p = itti_alloc_new_message (TASK_CU_F1, SCTP_INIT_MSG);
-  message_p->ittiMsg.sctp_init.port = RC.rrc[enb_id]->eth_params_s.my_portc;
+  message_p->ittiMsg.sctp_init.port = F1AP_PORT_NUMBER;
   message_p->ittiMsg.sctp_init.ppid = F1AP_SCTP_PPID;
   message_p->ittiMsg.sctp_init.ipv4 = 1;
   message_p->ittiMsg.sctp_init.ipv6 = 0;

openair2/F1AP/DU_F1AP.c

@@ -45,6 +45,9 @@
 #define F1AP_UE_IDENTIFIER_NUMBER 3
 #define NUMBER_OF_eNB_MAX 3
 
+// #include "common/ran_context.h"
+// extern RAN_CONTEXT_t RC;
+
 /* This structure describes association of a DU to a CU */
 typedef struct f1ap_info {
 
@@ -170,8 +173,8 @@ void *F1AP_DU_task(void *arg) {
 // ==============================================================================
 
 static void du_f1ap_register(du_f1ap_instance_t      *instance_p,
-                             char               *cu_ip_address,
+                             f1ap_net_ip_address_t   *remote_address,  // CU
-                             int                cu_port,
+                             f1ap_net_ip_address_t   *local_address,   // DU
                              uint16_t                in_streams,
                              uint16_t                out_streams)
 {
@@ -182,13 +185,21 @@ static void du_f1ap_register(du_f1ap_instance_t *instance_p,
   message_p = itti_alloc_new_message(TASK_S1AP, SCTP_NEW_ASSOCIATION_REQ);
 
   sctp_new_association_req_p = &message_p->ittiMsg.sctp_new_association_req;
-
+  sctp_new_association_req_p->ulp_cnx_id = instance_p->instance;
-  sctp_new_association_req_p->port = cu_port;
+  sctp_new_association_req_p->port = F1AP_PORT_NUMBER;
   sctp_new_association_req_p->ppid = F1AP_SCTP_PPID;
 
   sctp_new_association_req_p->in_streams  = in_streams;
   sctp_new_association_req_p->out_streams = out_streams;
 
+  memcpy(&sctp_new_association_req_p->remote_address,
+         remote_address,
+         sizeof(*remote_address));
+
+  memcpy(&sctp_new_association_req_p->local_address,
+         local_address,
+         sizeof(*local_address));
+
   itti_send_msg_to_task(TASK_SCTP, instance_p->instance, message_p);
 }
 
@@ -227,8 +238,8 @@ void DU_send_sctp_association_req(instance_t instance, f1ap_setup_req_t *f1ap_se
   //}
 
     du_f1ap_register(new_instance,
-                     &f1ap_setup_req->CU_ipv4_address,
+                     &f1ap_setup_req->CU_f1_ip_address,  // remote
-                     &f1ap_setup_req->CU_port,
+                     &f1ap_setup_req->DU_f1_ip_address,  // local
                      f1ap_setup_req->sctp_in_streams,
                      f1ap_setup_req->sctp_out_streams);
 

openair2/F1AP/f1ap_common.h

@@ -394,23 +394,6 @@ extern int asn1_xer_print;
 //Forward declaration
 //struct f1ap_message_s;
 
-typedef struct f1ap_net_ip_address_s {
-  unsigned ipv4:1;
-  unsigned ipv6:1;
-  char ipv4_address[16];
-  char ipv6_address[46];
-} f1ap_net_ip_address_t;
-
-
-/*typedef struct f1ap_message_s {
-    F1AP_ProtocolIE_ID_t id;
-    F1AP_Criticality_t   criticality;
-    uint8_t            direction;
-    union {
-        F1AP_F1SetupRequestIEs_t f1ap_F1SetupRequestIEs;
-    } msg;
-} f1ap_message;*/
-
 /** \brief Function callback prototype.
  **/
 typedef int (*f1ap_message_decoded_callback)(
@@ -419,73 +402,4 @@ typedef int (*f1ap_message_decoded_callback)(
   F1AP_F1AP_PDU_t       *message_p
 );
 
-/** \brief Encode a successfull outcome message
- \param buffer pointer to buffer in which data will be encoded
- \param length pointer to the length of buffer
- \param procedureCode Procedure code for the message
- \param criticality Criticality of the message
- \param td ASN1C type descriptor of the sptr
- \param sptr Deferenced pointer to the structure to encode
- @returns size in bytes encded on success or 0 on failure
- **/
-/*ssize_t f1ap_generate_successfull_outcome(
-  uint8_t               **buffer,
-  uint32_t               *length,
-  e_F1ap_ProcedureCode    procedureCode,
-  F1ap_Criticality_t      criticality,
-  asn_TYPE_descriptor_t  *td,
-  void                   *sptr);
-*/
-/** \brief Encode an initiating message
- \param buffer pointer to buffer in which data will be encoded
- \param length pointer to the length of buffer
- \param procedureCode Procedure code for the message
- \param criticality Criticality of the message
- \param td ASN1C type descriptor of the sptr
- \param sptr Deferenced pointer to the structure to encode
- @returns size in bytes encded on success or 0 on failure
- **/
-/*ssize_t f1ap_generate_initiating_message(
-  uint8_t               **buffer,
-  uint32_t               *length,
-  e_F1ap_ProcedureCode    procedureCode,
-  F1ap_Criticality_t      criticality,
-  asn_TYPE_descriptor_t  *td,
-  void                   *sptr);
-*/
-/** \brief Encode an unsuccessfull outcome message
- \param buffer pointer to buffer in which data will be encoded
- \param length pointer to the length of buffer
- \param procedureCode Procedure code for the message
- \param criticality Criticality of the message
- \param td ASN1C type descriptor of the sptr
- \param sptr Deferenced pointer to the structure to encode
- @returns size in bytes encded on success or 0 on failure
- **/
-/*ssize_t f1ap_generate_unsuccessfull_outcome(
-  uint8_t               **buffer,
-  uint32_t               *length,
-  e_F1ap_ProcedureCode    procedureCode,
-  F1ap_Criticality_t      criticality,
-  asn_TYPE_descriptor_t  *td,
-  void                   *sptr);
-*/
-/** \brief Generate a new IE
- \param id Protocol ie id of the IE
- \param criticality Criticality of the IE
- \param type ASN1 type descriptor of the IE value
- \param sptr Structure to be encoded in the value field
- @returns a pointer to the newly created IE structure or NULL in case of failure
- **/
-/*F1ap_IE_t *f1ap_new_ie(F1ap_ProtocolIE_ID_t   id,
-                       F1ap_Criticality_t     criticality,
-                       asn_TYPE_descriptor_t *type,
-                       void                  *sptr);
-*/
-/** \brief Handle criticality
- \param criticality Criticality of the IE
- @returns void
- **/
-//void f1ap_handle_criticality(F1ap_Criticality_t criticality);
-
 #endif /* F1AP_COMMON_H_ */

openair2/F1AP/f1ap_default_values.h

@@ -40,7 +40,7 @@
 #define ENB_NAME        "Eurecom ENB"
 #define ENB_NAME_FORMAT (ENB_NAME" %u")
 
-#define F1AP_PORT_NUMBER        (3642)
+#define F1AP_PORT_NUMBER        (30923)
 #define F1AP_SCTP_PPID          (62)
 
 #endif /* F1AP_DEFAULT_VALUES_H_ */