maki/openairinterface5g
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Merge branch 'develop' into ldpc_offload_t1_mr

Browse Source 
Conflicts:
	executables/nr-gnb.c
	openair1/PHY/CODING/nrLDPC_defs.h
	openair1/PHY/INIT/nr_init.c
	openair1/PHY/NR_TRANSPORT/nr_ulsch_decoding.c
	openair1/SCHED_NR/phy_procedures_nr_gNB.c
	openair1/SIMULATION/NR_PHY/ulsim.c
	openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_ulsch.c
This commit is contained in:
Hongzhi Wang
2022-06-17 14:49:54 +02:00
parent a39c972611 5944b212b2
commit b7295ab45f
642 changed files with 28534 additions and 28964 deletions
Download Patch File Download Diff File Expand all files Collapse all files
executables/softmodem-common.h
+19 -10
View File
@@ -53,7 +53,6 @@ extern "C"
#define CONFIG_HLP_DUMPFRAME "dump UE received frame to rxsig_frame0.dat and exit\n"
#define CONFIG_HLP_UELOOP "get softmodem (UE) to loop through memory instead of acquiring from HW\n"
#define CONFIG_HLP_PHYTST "test UE phy layer, mac disabled\n"
#define CONFIG_HLP_DORA "test gNB and UE with RA procedures\n"
#define CONFIG_HLP_SA "run gNB in standalone mode\n"
@@ -61,6 +60,7 @@ extern "C"
#define CONFIG_HLP_DMRSSYNC "tells RU to insert DMRS in subframe 1 slot 0"
#define CONFIG_HLP_CLK "tells hardware to use a clock reference (0:internal, 1:external, 2:gpsdo)\n"
#define CONFIG_HLP_TME "tells hardware to use a time reference (0:internal, 1:external, 2:gpsdo)\n"
#define CONFIG_HLP_TUNE_OFFSET "LO tuning offset to use in Hz\n"
#define CONFIG_HLP_USIM "use XOR autentication algo in case of test usim mode\n"
#define CONFIG_HLP_NOSNGLT "Disables single-thread mode in lte-softmodem\n"
#define CONFIG_HLP_DLF "Set the downlink frequency for all component carriers\n"
@@ -72,7 +72,8 @@ extern "C"
#define CONFIG_HLP_DLMCS "Set the maximum downlink MCS\n"
#define CONFIG_HLP_STMON "Enable processing timing measurement of lte softmodem on per subframe basis \n"
#define CONFIG_HLP_256QAM "Use the 256 QAM mcs table for PDSCH\n"
#define CONFIG_HLP_PRBINTER "Do PRB based averaging of channel estimates. Frequency domain linear interpolation by default\n"
#define CONFIG_HLP_CHESTFREQ "Set channel estimation type in frequency domain. 0-Linear interpolation (default). 1-PRB based averaging of channel estimates in frequency. \n"
#define CONFIG_HLP_CHESTTIME "Set channel estimation type in time domain. 0-Symbols take estimates of the last preceding DMRS symbol (default). 1-Symbol based averaging of channel estimates in time. \n"
#define CONFIG_HLP_NONSTOP "Go back to frame sync mode after 100 consecutive PBCH failures\n"
//#define CONFIG_HLP_NUMUES "Set the number of UEs for the emulation"
@@ -93,12 +94,13 @@ extern "C"
#define CONFIG_HLP_USRP_THREAD "having extra thead for usrp tx\n"
#define CONFIG_HLP_NOS1 "Disable s1 interface\n"
#define CONFIG_HLP_RFSIM "Run in rf simulator mode (also known as basic simulator)\n"
#define CONFIG_HLP_RFSIM "Run in rf simulator mode\n"
#define CONFIG_HLP_NOKRNMOD "(noS1 only): Use tun instead of namesh module \n"
#define CONFIG_HLP_DISABLNBIOT "disable nb-iot, even if defined in config\n"
#define CONFIG_HLP_USRP_THREAD "having extra thead for usrp tx\n"
#define CONFIG_HLP_NFAPI "Change the nFAPI mode for NR\n"
#define CONFIG_L1_EMULATOR "Run in L1 emulated mode (disable PHY layer)\n"
#define CONFIG_HLP_CONTINUOUS_TX "perform continuous transmission, even in TDD mode (to work around USRP issues)\n"
/*-----------------------------------------------------------------------------------------------------------------------------------------------------*/
/* command line parameters common to eNodeB and UE */
@@ -118,14 +120,17 @@ extern "C"
#define EMULATE_RF softmodem_params.emulate_rf
#define CLOCK_SOURCE softmodem_params.clock_source
#define TIMING_SOURCE softmodem_params.timing_source
#define TUNE_OFFSET softmodem_params.tune_offset
#define SEND_DMRSSYNC softmodem_params.send_dmrs_sync
#define USIM_TEST softmodem_params.usim_test
#define PRB_INTERPOLATION softmodem_params.prb_interpolation
#define CHEST_FREQ softmodem_params.chest_freq
#define CHEST_TIME softmodem_params.chest_time
#define NFAPI softmodem_params.nfapi
#define NSA softmodem_params.nsa
#define NODE_NUMBER softmodem_params.node_number
#define NON_STOP softmodem_params.non_stop
#define EMULATE_L1 softmodem_params.emulate_l1
#define CONTINUOUS_TX softmodem_params.continuous_tx
#define DEFAULT_RFCONFIG_FILE "/usr/local/etc/syriq/ue.band7.tm1.PRB100.NR40.dat";
@@ -140,6 +145,7 @@ extern int usrp_tx_thread;
{"usim-test", CONFIG_HLP_USIM, PARAMFLAG_BOOL, u8ptr:&USIM_TEST, defintval:0, TYPE_UINT8, 0}, \
{"clock-source", CONFIG_HLP_CLK, 0, uptr:&CLOCK_SOURCE, defintval:0, TYPE_UINT, 0}, \
{"time-source", CONFIG_HLP_TME, 0, uptr:&TIMING_SOURCE, defintval:0, TYPE_UINT, 0}, \
{"tune-offset", CONFIG_HLP_TUNE_OFFSET, 0, dblptr:&TUNE_OFFSET, defintval:0, TYPE_DOUBLE, 0}, \
{"wait-for-sync", NULL, PARAMFLAG_BOOL, iptr:&WAIT_FOR_SYNC, defintval:0, TYPE_INT, 0}, \
{"single-thread-enable", CONFIG_HLP_NOSNGLT, PARAMFLAG_BOOL, iptr:&SINGLE_THREAD_FLAG, defintval:0, TYPE_INT, 0}, \
{"C" , CONFIG_HLP_DLF, 0, u64ptr:&(downlink_frequency[0][0]), defuintval:0, TYPE_UINT64, 0}, \
@@ -154,16 +160,17 @@ extern int usrp_tx_thread;
{"worker-config", CONFIG_HLP_WORKER_CMD, 0, strptr:(char **)&worker_config, defstrval:NULL, TYPE_STRING, 0}, \
{"noS1", CONFIG_HLP_NOS1, PARAMFLAG_BOOL, uptr:&noS1, defintval:0, TYPE_INT, 0}, \
{"rfsim", CONFIG_HLP_RFSIM, PARAMFLAG_BOOL, uptr:&rfsim, defintval:0, TYPE_INT, 0}, \
{"basicsim", CONFIG_HLP_RFSIM, PARAMFLAG_BOOL, uptr:&basicsim, defintval:0, TYPE_INT, 0}, \
{"nokrnmod", CONFIG_HLP_NOKRNMOD, PARAMFLAG_BOOL, uptr:&nokrnmod, defintval:0, TYPE_INT, 0}, \
{"nbiot-disable", CONFIG_HLP_DISABLNBIOT, PARAMFLAG_BOOL, uptr:&nonbiot, defuintval:0, TYPE_INT, 0}, \
{"chest-freq", CONFIG_HLP_CHESTFREQ, 0, iptr:&CHEST_FREQ, defintval:0, TYPE_INT, 0}, \
{"chest-time", CONFIG_HLP_CHESTTIME, 0, iptr:&CHEST_TIME, defintval:0, TYPE_INT, 0}, \
{"nsa", CONFIG_HLP_NSA, PARAMFLAG_BOOL, iptr:&NSA, defintval:0, TYPE_INT, 0}, \
{"node-number", NULL, 0, u16ptr:&NODE_NUMBER, defuintval:0, TYPE_UINT16, 0}, \
{"usrp-tx-thread-config", CONFIG_HLP_USRP_THREAD, 0, iptr:&usrp_tx_thread, defstrval:0, TYPE_INT, 0}, \
{"do-prb-interpolation", CONFIG_HLP_PRBINTER, PARAMFLAG_BOOL, iptr:&PRB_INTERPOLATION, defintval:0, TYPE_INT, 0}, \
{"nfapi", CONFIG_HLP_NFAPI, 0, u8ptr:&nfapi_mode, defintval:0, TYPE_UINT8, 0}, \
{"non-stop", CONFIG_HLP_NONSTOP, PARAMFLAG_BOOL, iptr:&NON_STOP, defintval:0, TYPE_INT, 0}, \
{"emulate-l1", CONFIG_L1_EMULATOR, PARAMFLAG_BOOL, iptr:&EMULATE_L1, defintval:0, TYPE_INT, 0} \
{"emulate-l1", CONFIG_L1_EMULATOR, PARAMFLAG_BOOL, iptr:&EMULATE_L1, defintval:0, TYPE_INT, 0}, \
{"continuous-tx", CONFIG_HLP_CONTINUOUS_TX,PARAMFLAG_BOOL, iptr:&CONTINUOUS_TX, defintval:0, TYPE_INT, 0}, \
}
#define CONFIG_HLP_NSA "Enable NSA mode \n"
@@ -201,7 +208,6 @@ extern int usrp_tx_thread;
#define SOFTMODEM_NOKRNMOD_BIT (1<<1)
#define SOFTMODEM_NONBIOT_BIT (1<<2)
#define SOFTMODEM_RFSIM_BIT (1<<10)
#define SOFTMODEM_BASICSIM_BIT (1<<11)
#define SOFTMODEM_SIML1_BIT (1<<12)
#define SOFTMODEM_DOSCOPE_BIT (1<<15)
#define SOFTMODEM_RECPLAY_BIT (1<<16)
@@ -218,7 +224,6 @@ extern int usrp_tx_thread;
#define IS_SOFTMODEM_NOKRNMOD ( get_softmodem_optmask() & SOFTMODEM_NOKRNMOD_BIT)
#define IS_SOFTMODEM_NONBIOT ( get_softmodem_optmask() & SOFTMODEM_NONBIOT_BIT)
#define IS_SOFTMODEM_RFSIM ( get_softmodem_optmask() & SOFTMODEM_RFSIM_BIT)
#define IS_SOFTMODEM_BASICSIM ( get_softmodem_optmask() & SOFTMODEM_BASICSIM_BIT)
#define IS_SOFTMODEM_SIML1 ( get_softmodem_optmask() & SOFTMODEM_SIML1_BIT)
#define IS_SOFTMODEM_DOSCOPE ( get_softmodem_optmask() & SOFTMODEM_DOSCOPE_BIT)
#define IS_SOFTMODEM_IQPLAYER ( get_softmodem_optmask() & SOFTMODEM_RECPLAY_BIT)
@@ -246,14 +251,18 @@ typedef struct {
int band;
uint32_t clock_source;
uint32_t timing_source;
double tune_offset;
int hw_timing_advance;
uint32_t send_dmrs_sync;
int prb_interpolation;
int use_256qam_table;
int chest_time;
int chest_freq;
uint8_t nfapi;
int nsa;
uint16_t node_number;
int non_stop;
int emulate_l1;
int continuous_tx;
} softmodem_params_t;
extern uint64_t get_softmodem_optmask(void);