changes in oaisim to support RRU + fronthaul. minor bugs corrected in UE.
This commit is contained in:
Raymond Knopp
+1
-1
@@ -34,7 +34,7 @@ eNBs =
|
||||
downlink_frequency = 2680000000L;
|
||||
uplink_frequency_offset = -120000000;
|
||||
Nid_cell = 0;
|
||||
N_RB_DL = 25;
|
||||
N_RB_DL = 50;
|
||||
Nid_cell_mbsfn = 0;
|
||||
nb_antenna_ports = 1;
|
||||
nb_antennas_tx = 1;
|
||||
|
||||
@@ -0,0 +1,191 @@
|
||||
Active_eNBs = ( "eNB_Eurecom_LTEBox");
|
||||
# Asn1_verbosity, choice in: none, info, annoying
|
||||
Asn1_verbosity = "none";
|
||||
|
||||
eNBs =
|
||||
(
|
||||
{
|
||||
////////// Identification parameters:
|
||||
eNB_ID = 0xe00;
|
||||
|
||||
cell_type = "CELL_MACRO_ENB";
|
||||
|
||||
eNB_name = "eNB_Eurecom_LTEBox";
|
||||
|
||||
// Tracking area code, 0x0000 and 0xfffe are reserved values
|
||||
tracking_area_code = "1";
|
||||
|
||||
mobile_country_code = "208";
|
||||
|
||||
mobile_network_code = "93";
|
||||
|
||||
////////// Physical parameters:
|
||||
|
||||
component_carriers = (
|
||||
{
|
||||
node_function = "NGFI_RCC_IF4p5";
|
||||
node_timing = "synch_to_ext_device";
|
||||
node_synch_ref = 0;
|
||||
frame_type = "FDD";
|
||||
tdd_config = 3;
|
||||
tdd_config_s = 0;
|
||||
prefix_type = "NORMAL";
|
||||
eutra_band = 7;
|
||||
downlink_frequency = 2685000000L;
|
||||
uplink_frequency_offset = -120000000;
|
||||
Nid_cell = 0;
|
||||
N_RB_DL = 25;
|
||||
Nid_cell_mbsfn = 0;
|
||||
nb_antenna_ports = 1;
|
||||
nb_antennas_tx = 1;
|
||||
nb_antennas_rx = 1;
|
||||
tx_gain = 90;
|
||||
rx_gain = 125;
|
||||
prach_root = 0;
|
||||
prach_config_index = 0;
|
||||
prach_high_speed = "DISABLE";
|
||||
prach_zero_correlation = 1;
|
||||
prach_freq_offset = 2;
|
||||
pucch_delta_shift = 1;
|
||||
pucch_nRB_CQI = 1;
|
||||
pucch_nCS_AN = 0;
|
||||
pucch_n1_AN = 32;
|
||||
pdsch_referenceSignalPower = -29;
|
||||
pdsch_p_b = 0;
|
||||
pusch_n_SB = 1;
|
||||
pusch_enable64QAM = "DISABLE";
|
||||
pusch_hoppingMode = "interSubFrame";
|
||||
pusch_hoppingOffset = 0;
|
||||
pusch_groupHoppingEnabled = "ENABLE";
|
||||
pusch_groupAssignment = 0;
|
||||
pusch_sequenceHoppingEnabled = "DISABLE";
|
||||
pusch_nDMRS1 = 1;
|
||||
phich_duration = "NORMAL";
|
||||
phich_resource = "ONESIXTH";
|
||||
srs_enable = "DISABLE";
|
||||
/* srs_BandwidthConfig =;
|
||||
srs_SubframeConfig =;
|
||||
srs_ackNackST =;
|
||||
srs_MaxUpPts =;*/
|
||||
|
||||
pusch_p0_Nominal = -96;
|
||||
pusch_alpha = "AL1";
|
||||
pucch_p0_Nominal = -104;
|
||||
msg3_delta_Preamble = 6;
|
||||
pucch_deltaF_Format1 = "deltaF2";
|
||||
pucch_deltaF_Format1b = "deltaF3";
|
||||
pucch_deltaF_Format2 = "deltaF0";
|
||||
pucch_deltaF_Format2a = "deltaF0";
|
||||
pucch_deltaF_Format2b = "deltaF0";
|
||||
|
||||
rach_numberOfRA_Preambles = 64;
|
||||
rach_preamblesGroupAConfig = "DISABLE";
|
||||
/*
|
||||
rach_sizeOfRA_PreamblesGroupA = ;
|
||||
rach_messageSizeGroupA = ;
|
||||
rach_messagePowerOffsetGroupB = ;
|
||||
*/
|
||||
rach_powerRampingStep = 4;
|
||||
rach_preambleInitialReceivedTargetPower = -108;
|
||||
rach_preambleTransMax = 10;
|
||||
rach_raResponseWindowSize = 10;
|
||||
rach_macContentionResolutionTimer = 48;
|
||||
rach_maxHARQ_Msg3Tx = 4;
|
||||
|
||||
pcch_default_PagingCycle = 128;
|
||||
pcch_nB = "oneT";
|
||||
bcch_modificationPeriodCoeff = 2;
|
||||
ue_TimersAndConstants_t300 = 1000;
|
||||
ue_TimersAndConstants_t301 = 1000;
|
||||
ue_TimersAndConstants_t310 = 1000;
|
||||
ue_TimersAndConstants_t311 = 10000;
|
||||
ue_TimersAndConstants_n310 = 20;
|
||||
ue_TimersAndConstants_n311 = 1;
|
||||
ue_TransmissionMode = 1;
|
||||
}
|
||||
);
|
||||
|
||||
|
||||
srb1_parameters :
|
||||
{
|
||||
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
|
||||
timer_poll_retransmit = 80;
|
||||
|
||||
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
|
||||
timer_reordering = 35;
|
||||
|
||||
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
|
||||
timer_status_prohibit = 0;
|
||||
|
||||
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
|
||||
poll_pdu = 4;
|
||||
|
||||
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
|
||||
poll_byte = 99999;
|
||||
|
||||
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
|
||||
max_retx_threshold = 4;
|
||||
}
|
||||
|
||||
# ------- SCTP definitions
|
||||
SCTP :
|
||||
{
|
||||
# Number of streams to use in input/output
|
||||
SCTP_INSTREAMS = 2;
|
||||
SCTP_OUTSTREAMS = 2;
|
||||
};
|
||||
|
||||
|
||||
////////// MME parameters:
|
||||
mme_ip_address = ( { ipv4 = "127.0.0.3";
|
||||
ipv6 = "192:168:30::17";
|
||||
active = "yes";
|
||||
preference = "ipv4";
|
||||
}
|
||||
);
|
||||
|
||||
NETWORK_INTERFACES :
|
||||
{
|
||||
|
||||
ENB_INTERFACE_NAME_FOR_S1_MME = "lo";
|
||||
ENB_IPV4_ADDRESS_FOR_S1_MME = "127.0.0.2/24";
|
||||
ENB_INTERFACE_NAME_FOR_S1U = "lo";
|
||||
ENB_IPV4_ADDRESS_FOR_S1U = "127.0.0.5/24";
|
||||
ENB_PORT_FOR_S1U = 2152; # Spec 2152
|
||||
};
|
||||
|
||||
rrh_gw_config = (
|
||||
{
|
||||
local_if_name = "lo";
|
||||
remote_address = "127.0.0.1";
|
||||
local_address = "127.0.0.2";
|
||||
local_port = 50000; #for raw option local port must be the same to remote
|
||||
remote_port = 50000;
|
||||
rrh_gw_active = "yes";
|
||||
tr_preference = "udp_if4p5";
|
||||
rf_preference = "usrp_b200";
|
||||
iq_txshift = 4;
|
||||
tx_sample_advance = 80;
|
||||
tx_scheduling_advance = 9;
|
||||
}
|
||||
);
|
||||
|
||||
log_config :
|
||||
{
|
||||
global_log_level ="info";
|
||||
global_log_verbosity ="medium";
|
||||
hw_log_level ="info";
|
||||
hw_log_verbosity ="medium";
|
||||
phy_log_level ="info";
|
||||
phy_log_verbosity ="medium";
|
||||
mac_log_level ="info";
|
||||
mac_log_verbosity ="high";
|
||||
rlc_log_level ="info";
|
||||
rlc_log_verbosity ="medium";
|
||||
pdcp_log_level ="info";
|
||||
pdcp_log_verbosity ="medium";
|
||||
rrc_log_level ="info";
|
||||
rrc_log_verbosity ="medium";
|
||||
};
|
||||
}
|
||||
);
|
||||
@@ -0,0 +1,191 @@
|
||||
Active_eNBs = ( "eNB_Eurecom_LTEBox");
|
||||
# Asn1_verbosity, choice in: none, info, annoying
|
||||
Asn1_verbosity = "none";
|
||||
|
||||
eNBs =
|
||||
(
|
||||
{
|
||||
////////// Identification parameters:
|
||||
eNB_ID = 0xe00;
|
||||
|
||||
cell_type = "CELL_MACRO_ENB";
|
||||
|
||||
eNB_name = "eNB_Eurecom_LTEBox";
|
||||
|
||||
// Tracking area code, 0x0000 and 0xfffe are reserved values
|
||||
tracking_area_code = "1";
|
||||
|
||||
mobile_country_code = "208";
|
||||
|
||||
mobile_network_code = "93";
|
||||
|
||||
////////// Physical parameters:
|
||||
|
||||
component_carriers = (
|
||||
{
|
||||
node_function = "NGFI_RCC_IF4p5";
|
||||
node_timing = "synch_to_ext_device";
|
||||
node_synch_ref = 0;
|
||||
frame_type = "FDD";
|
||||
tdd_config = 3;
|
||||
tdd_config_s = 0;
|
||||
prefix_type = "NORMAL";
|
||||
eutra_band = 7;
|
||||
downlink_frequency = 2685000000L;
|
||||
uplink_frequency_offset = -120000000;
|
||||
Nid_cell = 0;
|
||||
N_RB_DL = 50;
|
||||
Nid_cell_mbsfn = 0;
|
||||
nb_antenna_ports = 1;
|
||||
nb_antennas_tx = 1;
|
||||
nb_antennas_rx = 1;
|
||||
tx_gain = 90;
|
||||
rx_gain = 125;
|
||||
prach_root = 0;
|
||||
prach_config_index = 0;
|
||||
prach_high_speed = "DISABLE";
|
||||
prach_zero_correlation = 1;
|
||||
prach_freq_offset = 2;
|
||||
pucch_delta_shift = 1;
|
||||
pucch_nRB_CQI = 1;
|
||||
pucch_nCS_AN = 0;
|
||||
pucch_n1_AN = 32;
|
||||
pdsch_referenceSignalPower = -27;
|
||||
pdsch_p_b = 0;
|
||||
pusch_n_SB = 1;
|
||||
pusch_enable64QAM = "DISABLE";
|
||||
pusch_hoppingMode = "interSubFrame";
|
||||
pusch_hoppingOffset = 0;
|
||||
pusch_groupHoppingEnabled = "ENABLE";
|
||||
pusch_groupAssignment = 0;
|
||||
pusch_sequenceHoppingEnabled = "DISABLE";
|
||||
pusch_nDMRS1 = 1;
|
||||
phich_duration = "NORMAL";
|
||||
phich_resource = "ONESIXTH";
|
||||
srs_enable = "DISABLE";
|
||||
/* srs_BandwidthConfig =;
|
||||
srs_SubframeConfig =;
|
||||
srs_ackNackST =;
|
||||
srs_MaxUpPts =;*/
|
||||
|
||||
pusch_p0_Nominal = -96;
|
||||
pusch_alpha = "AL1";
|
||||
pucch_p0_Nominal = -104;
|
||||
msg3_delta_Preamble = 6;
|
||||
pucch_deltaF_Format1 = "deltaF2";
|
||||
pucch_deltaF_Format1b = "deltaF3";
|
||||
pucch_deltaF_Format2 = "deltaF0";
|
||||
pucch_deltaF_Format2a = "deltaF0";
|
||||
pucch_deltaF_Format2b = "deltaF0";
|
||||
|
||||
rach_numberOfRA_Preambles = 64;
|
||||
rach_preamblesGroupAConfig = "DISABLE";
|
||||
/*
|
||||
rach_sizeOfRA_PreamblesGroupA = ;
|
||||
rach_messageSizeGroupA = ;
|
||||
rach_messagePowerOffsetGroupB = ;
|
||||
*/
|
||||
rach_powerRampingStep = 4;
|
||||
rach_preambleInitialReceivedTargetPower = -108;
|
||||
rach_preambleTransMax = 10;
|
||||
rach_raResponseWindowSize = 10;
|
||||
rach_macContentionResolutionTimer = 48;
|
||||
rach_maxHARQ_Msg3Tx = 4;
|
||||
|
||||
pcch_default_PagingCycle = 128;
|
||||
pcch_nB = "oneT";
|
||||
bcch_modificationPeriodCoeff = 2;
|
||||
ue_TimersAndConstants_t300 = 1000;
|
||||
ue_TimersAndConstants_t301 = 1000;
|
||||
ue_TimersAndConstants_t310 = 1000;
|
||||
ue_TimersAndConstants_t311 = 10000;
|
||||
ue_TimersAndConstants_n310 = 20;
|
||||
ue_TimersAndConstants_n311 = 1;
|
||||
ue_TransmissionMode = 1;
|
||||
}
|
||||
);
|
||||
|
||||
|
||||
srb1_parameters :
|
||||
{
|
||||
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
|
||||
timer_poll_retransmit = 80;
|
||||
|
||||
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
|
||||
timer_reordering = 35;
|
||||
|
||||
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
|
||||
timer_status_prohibit = 0;
|
||||
|
||||
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
|
||||
poll_pdu = 4;
|
||||
|
||||
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
|
||||
poll_byte = 99999;
|
||||
|
||||
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
|
||||
max_retx_threshold = 4;
|
||||
}
|
||||
|
||||
# ------- SCTP definitions
|
||||
SCTP :
|
||||
{
|
||||
# Number of streams to use in input/output
|
||||
SCTP_INSTREAMS = 2;
|
||||
SCTP_OUTSTREAMS = 2;
|
||||
};
|
||||
|
||||
|
||||
////////// MME parameters:
|
||||
mme_ip_address = ( { ipv4 = "127.0.0.3";
|
||||
ipv6 = "192:168:30::17";
|
||||
active = "yes";
|
||||
preference = "ipv4";
|
||||
}
|
||||
);
|
||||
|
||||
NETWORK_INTERFACES :
|
||||
{
|
||||
|
||||
ENB_INTERFACE_NAME_FOR_S1_MME = "lo";
|
||||
ENB_IPV4_ADDRESS_FOR_S1_MME = "127.0.0.2/24";
|
||||
ENB_INTERFACE_NAME_FOR_S1U = "lo";
|
||||
ENB_IPV4_ADDRESS_FOR_S1U = "127.0.0.5/24";
|
||||
ENB_PORT_FOR_S1U = 2152; # Spec 2152
|
||||
};
|
||||
|
||||
rrh_gw_config = (
|
||||
{
|
||||
local_if_name = "lo";
|
||||
remote_address = "127.0.0.1";
|
||||
local_address = "127.0.0.2";
|
||||
local_port = 50000; #for raw option local port must be the same to remote
|
||||
remote_port = 50000;
|
||||
rrh_gw_active = "yes";
|
||||
tr_preference = "udp_if4p5";
|
||||
rf_preference = "usrp_b200";
|
||||
iq_txshift = 4;
|
||||
tx_sample_advance = 80;
|
||||
tx_scheduling_advance = 9;
|
||||
}
|
||||
);
|
||||
|
||||
log_config :
|
||||
{
|
||||
global_log_level ="info";
|
||||
global_log_verbosity ="medium";
|
||||
hw_log_level ="info";
|
||||
hw_log_verbosity ="medium";
|
||||
phy_log_level ="info";
|
||||
phy_log_verbosity ="medium";
|
||||
mac_log_level ="info";
|
||||
mac_log_verbosity ="high";
|
||||
rlc_log_level ="info";
|
||||
rlc_log_verbosity ="medium";
|
||||
pdcp_log_level ="info";
|
||||
pdcp_log_verbosity ="medium";
|
||||
rrc_log_level ="info";
|
||||
rrc_log_verbosity ="medium";
|
||||
};
|
||||
}
|
||||
);
|
||||
@@ -0,0 +1,193 @@
|
||||
Active_eNBs = ( "eNB_Eurecom_LTEBox");
|
||||
# Asn1_verbosity, choice in: none, info, annoying
|
||||
Asn1_verbosity = "none";
|
||||
|
||||
eNBs =
|
||||
(
|
||||
{
|
||||
////////// Identification parameters:
|
||||
eNB_ID = 0xe00;
|
||||
|
||||
cell_type = "CELL_MACRO_ENB";
|
||||
|
||||
eNB_name = "eNB_Eurecom_LTEBox";
|
||||
|
||||
// Tracking area code, 0x0000 and 0xfffe are reserved values
|
||||
tracking_area_code = "1";
|
||||
|
||||
mobile_country_code = "208";
|
||||
|
||||
mobile_network_code = "93";
|
||||
|
||||
////////// Physical parameters:
|
||||
|
||||
component_carriers = (
|
||||
{
|
||||
node_function = "NGFI_RRU_IF4p5";
|
||||
node_timing = "synch_to_ext_device";
|
||||
node_synch_ref = 0;
|
||||
frame_type = "FDD";
|
||||
tdd_config = 3;
|
||||
tdd_config_s = 0;
|
||||
prefix_type = "NORMAL";
|
||||
eutra_band = 7;
|
||||
downlink_frequency = 2685000000L;
|
||||
uplink_frequency_offset = -120000000;
|
||||
Nid_cell = 0;
|
||||
N_RB_DL = 25;
|
||||
Nid_cell_mbsfn = 0;
|
||||
nb_antenna_ports = 1;
|
||||
nb_antennas_tx = 1;
|
||||
nb_antennas_rx = 1;
|
||||
tx_gain = 90;
|
||||
rx_gain = 120;
|
||||
prach_root = 0;
|
||||
prach_config_index = 0;
|
||||
prach_high_speed = "DISABLE";
|
||||
prach_zero_correlation = 1;
|
||||
prach_freq_offset = 2;
|
||||
pucch_delta_shift = 1;
|
||||
pucch_nRB_CQI = 1;
|
||||
pucch_nCS_AN = 0;
|
||||
pucch_n1_AN = 32;
|
||||
pdsch_referenceSignalPower = -29;
|
||||
pdsch_p_b = 0;
|
||||
pusch_n_SB = 1;
|
||||
pusch_enable64QAM = "DISABLE";
|
||||
pusch_hoppingMode = "interSubFrame";
|
||||
pusch_hoppingOffset = 0;
|
||||
pusch_groupHoppingEnabled = "ENABLE";
|
||||
pusch_groupAssignment = 0;
|
||||
pusch_sequenceHoppingEnabled = "DISABLE";
|
||||
pusch_nDMRS1 = 1;
|
||||
phich_duration = "NORMAL";
|
||||
phich_resource = "ONESIXTH";
|
||||
srs_enable = "DISABLE";
|
||||
/* srs_BandwidthConfig =;
|
||||
srs_SubframeConfig =;
|
||||
srs_ackNackST =;
|
||||
srs_MaxUpPts =;*/
|
||||
|
||||
pusch_p0_Nominal = -95;
|
||||
pusch_alpha = "AL1";
|
||||
pucch_p0_Nominal = -104;
|
||||
msg3_delta_Preamble = 6;
|
||||
pucch_deltaF_Format1 = "deltaF2";
|
||||
pucch_deltaF_Format1b = "deltaF3";
|
||||
pucch_deltaF_Format2 = "deltaF0";
|
||||
pucch_deltaF_Format2a = "deltaF0";
|
||||
pucch_deltaF_Format2b = "deltaF0";
|
||||
|
||||
rach_numberOfRA_Preambles = 64;
|
||||
rach_preamblesGroupAConfig = "DISABLE";
|
||||
/*
|
||||
rach_sizeOfRA_PreamblesGroupA = ;
|
||||
rach_messageSizeGroupA = ;
|
||||
rach_messagePowerOffsetGroupB = ;
|
||||
*/
|
||||
rach_powerRampingStep = 4;
|
||||
rach_preambleInitialReceivedTargetPower = -104;
|
||||
rach_preambleTransMax = 10;
|
||||
rach_raResponseWindowSize = 10;
|
||||
rach_macContentionResolutionTimer = 48;
|
||||
rach_maxHARQ_Msg3Tx = 4;
|
||||
|
||||
pcch_default_PagingCycle = 128;
|
||||
pcch_nB = "oneT";
|
||||
bcch_modificationPeriodCoeff = 2;
|
||||
ue_TimersAndConstants_t300 = 1000;
|
||||
ue_TimersAndConstants_t301 = 1000;
|
||||
ue_TimersAndConstants_t310 = 1000;
|
||||
ue_TimersAndConstants_t311 = 10000;
|
||||
ue_TimersAndConstants_n310 = 20;
|
||||
ue_TimersAndConstants_n311 = 1;
|
||||
|
||||
ue_TransmissionMode = 1;
|
||||
|
||||
}
|
||||
);
|
||||
|
||||
|
||||
srb1_parameters :
|
||||
{
|
||||
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
|
||||
timer_poll_retransmit = 80;
|
||||
|
||||
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
|
||||
timer_reordering = 35;
|
||||
|
||||
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
|
||||
timer_status_prohibit = 0;
|
||||
|
||||
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
|
||||
poll_pdu = 4;
|
||||
|
||||
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
|
||||
poll_byte = 99999;
|
||||
|
||||
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
|
||||
max_retx_threshold = 4;
|
||||
}
|
||||
|
||||
# ------- SCTP definitions
|
||||
SCTP :
|
||||
{
|
||||
# Number of streams to use in input/output
|
||||
SCTP_INSTREAMS = 2;
|
||||
SCTP_OUTSTREAMS = 2;
|
||||
};
|
||||
|
||||
|
||||
////////// MME parameters:
|
||||
mme_ip_address = ( { ipv4 = "192.168.12.11";
|
||||
ipv6 = "192:168:30::17";
|
||||
active = "yes";
|
||||
preference = "ipv4";
|
||||
}
|
||||
);
|
||||
|
||||
NETWORK_INTERFACES :
|
||||
{
|
||||
|
||||
ENB_INTERFACE_NAME_FOR_S1_MME = "eth3";
|
||||
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.215/24";
|
||||
ENB_INTERFACE_NAME_FOR_S1U = "eth3";
|
||||
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.215/24";
|
||||
ENB_PORT_FOR_S1U = 2152; # Spec 2152
|
||||
};
|
||||
|
||||
rrh_gw_config = (
|
||||
{
|
||||
local_if_name = "lo";
|
||||
remote_address = "127.0.0.2";
|
||||
local_address = "127.0.0.1";
|
||||
local_port = 50000; #for raw option local port must be the same to remote
|
||||
remote_port = 50000;
|
||||
rrh_gw_active = "yes";
|
||||
tr_preference = "udp_if4p5";
|
||||
rf_preference = "usrp_b200";
|
||||
iq_txshift = 4;
|
||||
tx_sample_advance = 80;
|
||||
tx_scheduling_advance = 9;
|
||||
}
|
||||
);
|
||||
|
||||
log_config :
|
||||
{
|
||||
global_log_level ="info";
|
||||
global_log_verbosity ="medium";
|
||||
hw_log_level ="info";
|
||||
hw_log_verbosity ="medium";
|
||||
phy_log_level ="info";
|
||||
phy_log_verbosity ="medium";
|
||||
mac_log_level ="info";
|
||||
mac_log_verbosity ="high";
|
||||
rlc_log_level ="info";
|
||||
rlc_log_verbosity ="medium";
|
||||
pdcp_log_level ="info";
|
||||
pdcp_log_verbosity ="medium";
|
||||
rrc_log_level ="info";
|
||||
rrc_log_verbosity ="medium";
|
||||
};
|
||||
}
|
||||
);
|
||||
@@ -0,0 +1,193 @@
|
||||
Active_eNBs = ( "eNB_Eurecom_LTEBox");
|
||||
# Asn1_verbosity, choice in: none, info, annoying
|
||||
Asn1_verbosity = "none";
|
||||
|
||||
eNBs =
|
||||
(
|
||||
{
|
||||
////////// Identification parameters:
|
||||
eNB_ID = 0xe00;
|
||||
|
||||
cell_type = "CELL_MACRO_ENB";
|
||||
|
||||
eNB_name = "eNB_Eurecom_LTEBox";
|
||||
|
||||
// Tracking area code, 0x0000 and 0xfffe are reserved values
|
||||
tracking_area_code = "1";
|
||||
|
||||
mobile_country_code = "208";
|
||||
|
||||
mobile_network_code = "93";
|
||||
|
||||
////////// Physical parameters:
|
||||
|
||||
component_carriers = (
|
||||
{
|
||||
node_function = "NGFI_RRU_IF4p5";
|
||||
node_timing = "synch_to_ext_device";
|
||||
node_synch_ref = 0;
|
||||
frame_type = "FDD";
|
||||
tdd_config = 3;
|
||||
tdd_config_s = 0;
|
||||
prefix_type = "NORMAL";
|
||||
eutra_band = 7;
|
||||
downlink_frequency = 2685000000L;
|
||||
uplink_frequency_offset = -120000000;
|
||||
Nid_cell = 0;
|
||||
N_RB_DL = 50;
|
||||
Nid_cell_mbsfn = 0;
|
||||
nb_antenna_ports = 1;
|
||||
nb_antennas_tx = 1;
|
||||
nb_antennas_rx = 1;
|
||||
tx_gain = 90;
|
||||
rx_gain = 120;
|
||||
prach_root = 0;
|
||||
prach_config_index = 0;
|
||||
prach_high_speed = "DISABLE";
|
||||
prach_zero_correlation = 1;
|
||||
prach_freq_offset = 2;
|
||||
pucch_delta_shift = 1;
|
||||
pucch_nRB_CQI = 1;
|
||||
pucch_nCS_AN = 0;
|
||||
pucch_n1_AN = 32;
|
||||
pdsch_referenceSignalPower = -27;
|
||||
pdsch_p_b = 0;
|
||||
pusch_n_SB = 1;
|
||||
pusch_enable64QAM = "DISABLE";
|
||||
pusch_hoppingMode = "interSubFrame";
|
||||
pusch_hoppingOffset = 0;
|
||||
pusch_groupHoppingEnabled = "ENABLE";
|
||||
pusch_groupAssignment = 0;
|
||||
pusch_sequenceHoppingEnabled = "DISABLE";
|
||||
pusch_nDMRS1 = 1;
|
||||
phich_duration = "NORMAL";
|
||||
phich_resource = "ONESIXTH";
|
||||
srs_enable = "DISABLE";
|
||||
/* srs_BandwidthConfig =;
|
||||
srs_SubframeConfig =;
|
||||
srs_ackNackST =;
|
||||
srs_MaxUpPts =;*/
|
||||
|
||||
pusch_p0_Nominal = -95;
|
||||
pusch_alpha = "AL1";
|
||||
pucch_p0_Nominal = -104;
|
||||
msg3_delta_Preamble = 6;
|
||||
pucch_deltaF_Format1 = "deltaF2";
|
||||
pucch_deltaF_Format1b = "deltaF3";
|
||||
pucch_deltaF_Format2 = "deltaF0";
|
||||
pucch_deltaF_Format2a = "deltaF0";
|
||||
pucch_deltaF_Format2b = "deltaF0";
|
||||
|
||||
rach_numberOfRA_Preambles = 64;
|
||||
rach_preamblesGroupAConfig = "DISABLE";
|
||||
/*
|
||||
rach_sizeOfRA_PreamblesGroupA = ;
|
||||
rach_messageSizeGroupA = ;
|
||||
rach_messagePowerOffsetGroupB = ;
|
||||
*/
|
||||
rach_powerRampingStep = 4;
|
||||
rach_preambleInitialReceivedTargetPower = -104;
|
||||
rach_preambleTransMax = 10;
|
||||
rach_raResponseWindowSize = 10;
|
||||
rach_macContentionResolutionTimer = 48;
|
||||
rach_maxHARQ_Msg3Tx = 4;
|
||||
|
||||
pcch_default_PagingCycle = 128;
|
||||
pcch_nB = "oneT";
|
||||
bcch_modificationPeriodCoeff = 2;
|
||||
ue_TimersAndConstants_t300 = 1000;
|
||||
ue_TimersAndConstants_t301 = 1000;
|
||||
ue_TimersAndConstants_t310 = 1000;
|
||||
ue_TimersAndConstants_t311 = 10000;
|
||||
ue_TimersAndConstants_n310 = 20;
|
||||
ue_TimersAndConstants_n311 = 1;
|
||||
|
||||
ue_TransmissionMode = 1;
|
||||
|
||||
}
|
||||
);
|
||||
|
||||
|
||||
srb1_parameters :
|
||||
{
|
||||
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
|
||||
timer_poll_retransmit = 80;
|
||||
|
||||
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
|
||||
timer_reordering = 35;
|
||||
|
||||
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
|
||||
timer_status_prohibit = 0;
|
||||
|
||||
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
|
||||
poll_pdu = 4;
|
||||
|
||||
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
|
||||
poll_byte = 99999;
|
||||
|
||||
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
|
||||
max_retx_threshold = 4;
|
||||
}
|
||||
|
||||
# ------- SCTP definitions
|
||||
SCTP :
|
||||
{
|
||||
# Number of streams to use in input/output
|
||||
SCTP_INSTREAMS = 2;
|
||||
SCTP_OUTSTREAMS = 2;
|
||||
};
|
||||
|
||||
|
||||
////////// MME parameters:
|
||||
mme_ip_address = ( { ipv4 = "192.168.12.11";
|
||||
ipv6 = "192:168:30::17";
|
||||
active = "yes";
|
||||
preference = "ipv4";
|
||||
}
|
||||
);
|
||||
|
||||
NETWORK_INTERFACES :
|
||||
{
|
||||
|
||||
ENB_INTERFACE_NAME_FOR_S1_MME = "eth3";
|
||||
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.215/24";
|
||||
ENB_INTERFACE_NAME_FOR_S1U = "eth3";
|
||||
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.215/24";
|
||||
ENB_PORT_FOR_S1U = 2152; # Spec 2152
|
||||
};
|
||||
|
||||
rrh_gw_config = (
|
||||
{
|
||||
local_if_name = "lo";
|
||||
remote_address = "127.0.0.2";
|
||||
local_address = "127.0.0.1";
|
||||
local_port = 50000; #for raw option local port must be the same to remote
|
||||
remote_port = 50000;
|
||||
rrh_gw_active = "yes";
|
||||
tr_preference = "udp_if4p5";
|
||||
rf_preference = "usrp_b200";
|
||||
iq_txshift = 4;
|
||||
tx_sample_advance = 80;
|
||||
tx_scheduling_advance = 9;
|
||||
}
|
||||
);
|
||||
|
||||
log_config :
|
||||
{
|
||||
global_log_level ="info";
|
||||
global_log_verbosity ="medium";
|
||||
hw_log_level ="info";
|
||||
hw_log_verbosity ="medium";
|
||||
phy_log_level ="info";
|
||||
phy_log_verbosity ="medium";
|
||||
mac_log_level ="info";
|
||||
mac_log_verbosity ="high";
|
||||
rlc_log_level ="info";
|
||||
rlc_log_verbosity ="medium";
|
||||
pdcp_log_level ="info";
|
||||
pdcp_log_verbosity ="medium";
|
||||
rrc_log_level ="info";
|
||||
rrc_log_verbosity ="medium";
|
||||
};
|
||||
}
|
||||
);
|
||||
@@ -2076,10 +2076,12 @@ void init_eNB(eNB_func_t node_function[], eNB_timing_t node_timing[],int nb_inst
|
||||
eNB->start_rf = start_rf;
|
||||
eNB->start_if = NULL;
|
||||
eNB->fh_asynch = NULL;
|
||||
ret = openair0_device_load(&eNB->rfdevice, &openair0_cfg[CC_id]);
|
||||
if (ret<0) {
|
||||
printf("Exiting, cannot initialize rf device\n");
|
||||
exit(-1);
|
||||
if (oaisim_flag == 0) {
|
||||
ret = openair0_device_load(&eNB->rfdevice, &openair0_cfg[CC_id]);
|
||||
if (ret<0) {
|
||||
printf("Exiting, cannot initialize rf device\n");
|
||||
exit(-1);
|
||||
}
|
||||
}
|
||||
eNB->rfdevice.host_type = BBU_HOST;
|
||||
eNB->ifdevice.host_type = BBU_HOST;
|
||||
|
||||
@@ -112,7 +112,7 @@ extern int netlink_init(void);
|
||||
|
||||
// In lte-enb.c
|
||||
extern int setup_eNB_buffers(PHY_VARS_eNB **phy_vars_eNB, openair0_config_t *openair0_cfg);
|
||||
extern void init_eNB(eNB_func_t *, eNB_timing_t *,int),eth_params_t *,int,int);
|
||||
extern void init_eNB(eNB_func_t *, eNB_timing_t *,int,eth_params_t *,int,int);
|
||||
extern void stop_eNB(int);
|
||||
extern void kill_eNB_proc(void);
|
||||
|
||||
|
||||
+20
-18
@@ -1169,7 +1169,7 @@ void *UE_thread(void *arg) {
|
||||
|
||||
rxs = UE->rfdevice.trx_read_func(&UE->rfdevice,
|
||||
×tamp1,
|
||||
rxp,
|
||||
rxp,
|
||||
UE->frame_parms.nb_prefix_samples0 - rx_off_diff,
|
||||
UE->frame_parms.nb_antennas_rx);
|
||||
|
||||
@@ -1262,26 +1262,28 @@ void *UE_thread(void *arg) {
|
||||
}
|
||||
}// for sf=0..10
|
||||
|
||||
uint8_t proc_select = 9&1;
|
||||
UE_rxtx_proc_t *proc = &UE->proc.proc_rxtx[proc_select];
|
||||
uint8_t proc_select = 9&1;
|
||||
UE_rxtx_proc_t *proc = &UE->proc.proc_rxtx[proc_select];
|
||||
|
||||
if ((UE->rx_offset<(5*UE->frame_parms.samples_per_tti)) &&
|
||||
(UE->rx_offset > 0) &&
|
||||
(rx_correction_timer == 0)) {
|
||||
rx_off_diff = -1 ;
|
||||
LOG_D(PHY,"AbsSubframe %d.%d UE->rx_offset %d > %d, diff %d\n",proc->frame_rx,proc->subframe_rx,UE->rx_offset,0,rx_off_diff);
|
||||
rx_correction_timer = 5;
|
||||
} else if ((UE->rx_offset>(5*UE->frame_parms.samples_per_tti)) &&
|
||||
(UE->rx_offset < ((10*UE->frame_parms.samples_per_tti))) &&
|
||||
(rx_correction_timer == 0)) { // moving to the left so drop rx_off_diff samples
|
||||
rx_off_diff = 1;
|
||||
LOG_D(PHY,"AbsSubframe %d.%d UE->rx_offset %d < %d, diff %d\n",proc->frame_rx,proc->subframe_rx,UE->rx_offset,10*UE->frame_parms.samples_per_tti,rx_off_diff);
|
||||
if (UE->no_timing_correction == 0) {
|
||||
if ((UE->rx_offset<(5*UE->frame_parms.samples_per_tti)) &&
|
||||
(UE->rx_offset > 0) &&
|
||||
(rx_correction_timer == 0)) {
|
||||
rx_off_diff = -1 ;
|
||||
LOG_D(PHY,"AbsSubframe %d.%d UE->rx_offset %d > %d, diff %d\n",proc->frame_rx,proc->subframe_rx,UE->rx_offset,0,rx_off_diff);
|
||||
rx_correction_timer = 5;
|
||||
} else if ((UE->rx_offset>(5*UE->frame_parms.samples_per_tti)) &&
|
||||
(UE->rx_offset < ((10*UE->frame_parms.samples_per_tti))) &&
|
||||
(rx_correction_timer == 0)) { // moving to the left so drop rx_off_diff samples
|
||||
rx_off_diff = 1;
|
||||
LOG_D(PHY,"AbsSubframe %d.%d UE->rx_offset %d < %d, diff %d\n",proc->frame_rx,proc->subframe_rx,UE->rx_offset,10*UE->frame_parms.samples_per_tti,rx_off_diff);
|
||||
|
||||
rx_correction_timer = 5;
|
||||
}
|
||||
|
||||
rx_correction_timer = 5;
|
||||
if (rx_correction_timer>0)
|
||||
rx_correction_timer--;
|
||||
}
|
||||
|
||||
if (rx_correction_timer>0)
|
||||
rx_correction_timer--;
|
||||
} // start_rx_stream==1
|
||||
} // UE->is_synchronized==1
|
||||
|
||||
|
||||
@@ -557,7 +557,7 @@ void do_UL_sig(channel_desc_t *UE2eNB[NUMBER_OF_UE_MAX][NUMBER_OF_eNB_MAX][MAX_N
|
||||
|
||||
#ifdef DEBUG_SIM
|
||||
rx_pwr2 = signal_energy(rxdata[0]+sf_offset,frame_parms->samples_per_tti)*(double)frame_parms->ofdm_symbol_size/(12.0*frame_parms->N_RB_DL);
|
||||
LOG_D(OCM,"[SIM][UL] eNB %d rx_pwr (ADC out) %f dB (%d) for subframe %d\n",eNB_id,10*log10((double)rx_pwr2),rx_pwr2,subframe);
|
||||
LOG_D(OCM,"[SIM][UL] eNB %d rx_pwr (ADC out) %f dB (%d) for subframe %d (offset %d)\n",eNB_id,10*log10((double)rx_pwr2),rx_pwr2,subframe,sf_offset);
|
||||
#else
|
||||
UNUSED_VARIABLE(tx_pwr);
|
||||
UNUSED_VARIABLE(rx_pwr);
|
||||
|
||||
@@ -574,7 +574,8 @@ l2l1_task (void *args_p)
|
||||
itti_mark_task_ready (TASK_L2L1);
|
||||
LOG_I(EMU, "TASK_L2L1 is READY\n");
|
||||
|
||||
if (oai_emulation.info.nb_enb_local > 0) {
|
||||
if ((oai_emulation.info.nb_enb_local > 0) &&
|
||||
(oai_emulation.info.node_function[0] < NGFI_RAU_IF4p5)) {
|
||||
/* Wait for the initialize message */
|
||||
do {
|
||||
if (message_p != NULL) {
|
||||
@@ -706,6 +707,8 @@ l2l1_task (void *args_p)
|
||||
update_ocm ();
|
||||
|
||||
for (sf = 0; sf < 10; sf++) {
|
||||
LOG_D(EMU,"************************* Subframe %d\n",sf);
|
||||
|
||||
start_meas (&oaisim_stats_f);
|
||||
|
||||
wait_for_slot_isr ();
|
||||
@@ -742,7 +745,7 @@ l2l1_task (void *args_p)
|
||||
(subframe_UE_mask_local == ((1<<NB_UE_INST)-1)))
|
||||
all_done=1;
|
||||
else
|
||||
usleep(500);
|
||||
usleep(1500);
|
||||
}
|
||||
|
||||
//clear subframe masks for next round
|
||||
@@ -1001,7 +1004,8 @@ l2l1_task (void *args_p)
|
||||
do_DL_sig (r_re0,
|
||||
r_im0,
|
||||
r_re,
|
||||
r_im,
|
||||
r_im,n
|
||||
|
||||
s_re,
|
||||
s_im,
|
||||
eNB2UE,
|
||||
@@ -1074,7 +1078,7 @@ l2l1_task (void *args_p)
|
||||
|
||||
|
||||
}
|
||||
|
||||
/*
|
||||
if ((frame >= 10) && (frame <= 11) && (abstraction_flag == 0)
|
||||
#ifdef PROC
|
||||
&&(Channel_Flag==0)
|
||||
@@ -1121,6 +1125,7 @@ l2l1_task (void *args_p)
|
||||
* 10,
|
||||
1, 1);
|
||||
}
|
||||
*/
|
||||
|
||||
//#ifdef XFORMS
|
||||
if (xforms==1) {
|
||||
|
||||
@@ -831,6 +831,7 @@ void get_simulation_options(int argc, char *argv[])
|
||||
oai_emulation.info.node_timing[0] = enb_properties->properties[0]->cc_node_timing[0];
|
||||
downlink_frequency[0][0] = enb_properties->properties[0]->downlink_frequency[0];
|
||||
uplink_frequency_offset[0][0] = enb_properties->properties[0]->uplink_frequency_offset[0];
|
||||
oai_emulation.info.N_RB_DL[0] = enb_properties->properties[0]->N_RB_DL[0];
|
||||
}
|
||||
|
||||
free(conf_config_file_name);
|
||||
@@ -1042,7 +1043,7 @@ int eNB_trx_read(openair0_device *device, openair0_timestamp *ptimestamp, void *
|
||||
|
||||
*ptimestamp = last_eNB_rx_timestamp[eNB_id][CC_id];
|
||||
|
||||
LOG_D(PHY,"eNB_trx_read nsamps %d TS(%llu,%llu) => subframe %d\n",nsamps,
|
||||
LOG_D(EMU,"eNB_trx_read nsamps %d TS(%llu,%llu) => subframe %d\n",nsamps,
|
||||
(unsigned long long)current_eNB_rx_timestamp[eNB_id][CC_id],
|
||||
(unsigned long long)last_eNB_rx_timestamp[eNB_id][CC_id],
|
||||
(*ptimestamp/PHY_vars_eNB_g[eNB_id][CC_id]->frame_parms.samples_per_tti)%10);
|
||||
@@ -1051,7 +1052,7 @@ int eNB_trx_read(openair0_device *device, openair0_timestamp *ptimestamp, void *
|
||||
while (sample_count<nsamps) {
|
||||
while (current_eNB_rx_timestamp[eNB_id][CC_id]<
|
||||
(nsamps+last_eNB_rx_timestamp[eNB_id][CC_id])) {
|
||||
LOG_D(EMU,"eNB: current TS %llu, last TS %llu, sleeping\n",current_eNB_rx_timestamp[eNB_id][CC_id],last_eNB_rx_timestamp[eNB_id][CC_id]);
|
||||
// LOG_D(EMU,"eNB: current TS %llu, last TS %llu, sleeping\n",current_eNB_rx_timestamp[eNB_id][CC_id],last_eNB_rx_timestamp[eNB_id][CC_id]);
|
||||
usleep(500);
|
||||
}
|
||||
|
||||
@@ -1061,7 +1062,7 @@ int eNB_trx_read(openair0_device *device, openair0_timestamp *ptimestamp, void *
|
||||
pthread_mutex_unlock(&subframe_mutex);
|
||||
|
||||
subframe = (last_eNB_rx_timestamp[eNB_id][CC_id]/PHY_vars_eNB_g[eNB_id][CC_id]->frame_parms.samples_per_tti)%10;
|
||||
LOG_D(PHY,"eNB_trx_read generating UL subframe %d (Ts %llu, current TS %llu)\n",
|
||||
LOG_D(EMU,"eNB_trx_read generating UL subframe %d (Ts %llu, current TS %llu)\n",
|
||||
subframe,(unsigned long long)*ptimestamp,
|
||||
(unsigned long long)current_eNB_rx_timestamp[eNB_id][CC_id]);
|
||||
|
||||
@@ -1107,12 +1108,12 @@ int UE_trx_read(openair0_device *device, openair0_timestamp *ptimestamp, void **
|
||||
while (sample_count<nsamps) {
|
||||
while (current_UE_rx_timestamp[UE_id][CC_id] <
|
||||
(last_UE_rx_timestamp[UE_id][CC_id]+read_size)) {
|
||||
LOG_D(EMU,"UE_trx_read : current TS %d, last TS %d, sleeping\n",current_UE_rx_timestamp[UE_id][CC_id],last_UE_rx_timestamp[UE_id][CC_id]);
|
||||
//LOG_D(EMU,"UE_trx_read : current TS %d, last TS %d, sleeping\n",current_UE_rx_timestamp[UE_id][CC_id],last_UE_rx_timestamp[UE_id][CC_id]);
|
||||
|
||||
usleep(500);
|
||||
}
|
||||
|
||||
LOG_D(EMU,"UE_trx_read : current TS %d, last TS %d, sleeping\n",current_UE_rx_timestamp[UE_id][CC_id],last_UE_rx_timestamp[UE_id][CC_id]);
|
||||
// LOG_D(EMU,"UE_trx_read : current TS %d, last TS %d, sleeping\n",current_UE_rx_timestamp[UE_id][CC_id],last_UE_rx_timestamp[UE_id][CC_id]);
|
||||
|
||||
// tell top-level we are busy
|
||||
pthread_mutex_lock(&subframe_mutex);
|
||||
@@ -1291,7 +1292,7 @@ void init_openair1(void)
|
||||
oai_emulation.info.tdd_config_S[CC_id],
|
||||
oai_emulation.info.extended_prefix_flag[CC_id],
|
||||
oai_emulation.info.N_RB_DL[CC_id],
|
||||
Nid_cell,
|
||||
enb_properties->properties[0]->Nid_cell[CC_id],
|
||||
cooperation_flag,
|
||||
enb_properties->properties[0]->nb_antenna_ports[CC_id],
|
||||
abstraction_flag,
|
||||
@@ -1299,6 +1300,11 @@ void init_openair1(void)
|
||||
enb_properties->properties[0]->nb_antennas_tx[CC_id],
|
||||
nb_antennas_rx_ue,
|
||||
oai_emulation.info.eMBMS_active_state);
|
||||
|
||||
// This is for IF4p5 RRU, gets done by RRC configuration of eNB
|
||||
PHY_vars_eNB_g[eNB_id][CC_id]->frame_parms.prach_config_common.prach_ConfigInfo.prach_ConfigIndex = enb_properties->properties[0]->prach_config_index[CC_id];
|
||||
PHY_vars_eNB_g[eNB_id][CC_id]->frame_parms.prach_config_common.prach_ConfigInfo.prach_FreqOffset = enb_properties->properties[0]->prach_freq_offset[CC_id];
|
||||
|
||||
}
|
||||
|
||||
for (eNB_id=0; eNB_id<NB_eNB_INST; eNB_id++) {
|
||||
|
||||
Reference in New Issue
Block a user