From 020f08b37db6616df9cbf06af82c497c59ce9b06 Mon Sep 17 00:00:00 2001 From: Rohit Gupta Date: Wed, 30 Dec 2015 21:45:34 +0100 Subject: [PATCH 01/55] fixed to support doxygen --- targets/ARCH/COMMON/common_lib.h | 82 +++++++++++++++++++++++--------- 1 file changed, 60 insertions(+), 22 deletions(-) diff --git a/targets/ARCH/COMMON/common_lib.h b/targets/ARCH/COMMON/common_lib.h index 156da0c4ce..5526118828 100644 --- a/targets/ARCH/COMMON/common_lib.h +++ b/targets/ARCH/COMMON/common_lib.h @@ -46,7 +46,7 @@ typedef int64_t openair0_timestamp; typedef volatile int64_t openair0_vtimestamp; -/* structrue holds the parameters to configure USRP devices*/ +/*!\brief structrue holds the parameters to configure USRP devices*/ typedef struct openair0_device_t openair0_device; @@ -68,7 +68,8 @@ typedef enum { /** @addtogroup _PHY_RF_INTERFACE_ * @{ */ - + +/*! \brief RF Gain clibration */ typedef struct { //! Frequency for which RX chain was calibrated double freq; @@ -76,10 +77,11 @@ typedef struct { double offset; } rx_gain_calib_table_t; +/*! \brief RF frontend parameters set by application */ typedef struct { //! Module ID for this configuration int Mod_id; - // device log level + //! device log level int log_level; //! duplexing mode duplex_mode_t duplex_mode; @@ -136,10 +138,11 @@ typedef struct { } openair0_config_t; +/*! \brief RF mapping */ typedef struct { - /* card id */ + //! card id int card; - /* rf chain id */ + //! rf chain id int chain; } openair0_rf_map; @@ -182,20 +185,21 @@ typedef enum { }func_type_t; +/*!\brief structrue holds the parameters to configure USRP devices */ struct openair0_device_t { - /* Module ID of this device */ + //! Module ID of this device int Mod_id; - /* Type of this device */ + //! Type of this device dev_type_t type; - /* Type of the device's host (BBU/RRH) */ + //! Type of the device's host (BBU/RRH) func_type_t func_type; - /* RF frontend parameters set by application */ + //! RF frontend parameters set by application openair0_config_t openair0_cfg; - /* Can be used by driver to hold internal structure*/ + //! Can be used by driver to hold internal structure void *priv; /* Functions API, which are called by the application*/ @@ -217,7 +221,7 @@ struct openair0_device_t { @param msg pointer to the message structure passed between BBU-RRH @param msg_len length of the message */ - int (*trx_reply_func)(openair0_device *openair0, void *msg, ssize_t msg_len); + int (*trx_reply_func)(openair0_device *device, void *msg, ssize_t msg_len); /*! \brief Called to send samples to the RF target @param device pointer to the device structure specific to the RF hardware target @@ -235,9 +239,9 @@ struct openair0_device_t { * was received. * \param device the hardware to use * \param[out] ptimestamp the time at which the first sample was received. - * \param[out] An array of pointers to buffers for received samples. The buffers must be large enough to hold the number of samples \ref nsamps. + * \param[out] buff An array of pointers to buffers for received samples. The buffers must be large enough to hold the number of samples \ref nsamps. * \param nsamps Number of samples. One sample is 2 byte I + 2 byte Q => 4 byte. - * \param cc Number of channels. If cc == 1, only buff[0] is filled with samples. + * \param antenna_id Index of antenna for which to receive samples * \returns the number of sample read */ int (*trx_read_func)(openair0_device *device, openair0_timestamp *ptimestamp, void **buff, int nsamps,int antenna_id); @@ -254,22 +258,29 @@ struct openair0_device_t { */ int (*trx_reset_stats_func)(openair0_device *device); - /*! \brief Terminate operation of the transceiver -- free all associated resources */ + /*! \brief Terminate operation of the transceiver -- free all associated resources + * \param device the hardware to use + */ void (*trx_end_func)(openair0_device *device); - /* Terminate operation */ + /*! \brief Stop operation of the transceiver + * \param card RF Card to use + */ int (*trx_stop_func)(int card); /* Functions API related to UE*/ /*! \brief Set RX feaquencies - * \param + * \param device the hardware to use + * \param openair0_cfg RF frontend parameters set by application + * \param exmimo_dump_config dump EXMIMO configuration * \returns 0 in success */ int (*trx_set_freq_func)(openair0_device* device, openair0_config_t *openair0_cfg,int exmimo_dump_config); /*! \brief Set gains - * \param + * \param device the hardware to use + * \param openair0_cfg RF frontend parameters set by application * \returns 0 in success */ int (*trx_set_gains_func)(openair0_device* device, openair0_config_t *openair0_cfg); @@ -282,20 +293,47 @@ extern "C" { #endif -/*! \brief Initialize Openair RF target. It returns 0 if OK */ + /*! \brief Initialize Openair RF target. It returns 0 if OK + * \param device the hardware to use + * \param openair0_cfg RF frontend parameters set by application + */ int openair0_device_init(openair0_device* device, openair0_config_t *openair0_cfg); //USRP -/*! \brief Get the current timestamp of USRP */ + /*! \brief Get the current timestamp of USRP + * \param device the hardware to use + */ openair0_timestamp get_usrp_time(openair0_device *device); -/*! \brief Set the RX frequency of USRP RF TARGET */ + + /*! \brief Set the RX frequency of USRP RF TARGET + * \param device the hardware to use + * \param openair0_cfg RF frontend parameters set by application + */ int openair0_set_rx_frequencies(openair0_device* device, openair0_config_t *openair0_cfg); -//extern -/*! \brief Initialize Openair ETHERNET target. It returns 0 if OK */ + //extern functions + /*! \brief Initialize Openair ETHERNET target. It returns 0 if OK + * \param device the hardware to use + * \param openair0_cfg RF frontend parameters set by application + */ int openair0_dev_init_eth(openair0_device *device, openair0_config_t *openair0_cfg); + + /*! \brief Initialize Openair BLADERF target. It returns 0 if OK + * \param device the hardware to use + * \param openair0_cfg RF frontend parameters set by application + */ int openair0_dev_init_bladerf(openair0_device *device, openair0_config_t *openair0_cfg); + + /*! \brief Initialize Openair USRP target. It returns 0 if OK + * \param device the hardware to use + * \param openair0_cfg RF frontend parameters set by application + */ int openair0_dev_init_usrp(openair0_device* device, openair0_config_t *openair0_cfg); + + /*! \brief Initialize Openair EXMIMO target. It returns 0 if OK + * \param device the hardware to use + * \param openair0_cfg RF frontend parameters set by application + */ int openair0_dev_init_exmimo(openair0_device *device, openair0_config_t *openair0_cfg); /*@}*/ From 51942ab13c440dd5d458e9889f7b40784fc9a0a7 Mon Sep 17 00:00:00 2001 From: Rohit Gupta Date: Thu, 31 Dec 2015 07:25:45 +0100 Subject: [PATCH 02/55] added doxygen support to main script --- cmake_targets/build_oai | 25 +++++++++++++++++++++++-- 1 file changed, 23 insertions(+), 2 deletions(-) diff --git a/cmake_targets/build_oai b/cmake_targets/build_oai index 25bec96b98..fb3bd7823b 100755 --- a/cmake_targets/build_oai +++ b/cmake_targets/build_oai @@ -53,7 +53,7 @@ VERBOSE_COMPILE=0 CFLAGS_PROCESSOR_USER="" RUN_GROUP=0 TEST_CASE_GROUP="" - +BUILD_DOXYGEN=0 trap handle_ctrl_c INT function print_help() { @@ -113,6 +113,8 @@ Options Shows detailed compilation instructions in makefile --cflags_processor Manually Add CFLAGS of processor if they are not detected correctly by script. Only add these flags if you know your processor supports them. Example flags: -msse3 -msse4.1 -msse4.2 -mavx2 +--build-doxygen + Builds doxygen based documentation. Usage (first build): oaisim (eNB + UE): ./build_oai -I -g --oaisim -x --install-system-files @@ -225,6 +227,10 @@ function main() { CFLAGS_PROCESSOR_USER=$2 echo_info "setting CPU FLAGS from USER to: $CFLAGS_PROCESSOR_USER" shift 2;; + --build-doxygen) + BUILD_DOXYGEN=1 + echo_info "Will build doxygen support" + shift;; -h | --help) print_help exit 1;; @@ -550,7 +556,22 @@ function main() { rrh_gw $dbin/rrh_gw fi - + # Doxygen Support + ##################### + if [ "$BUILD_DOXYGEN" = "1" ] ;then + doxygen_log=$OPENAIR_DIR/cmake_targets/log/doxygen.log + echo_info "Building doxygen based documentation. The documentation file is located here: $OPENAIR_DIR/targets/DOCS/html/index.html" + echo_info "Doxygen Generation log is located here: $doxygen_log" + echo_info "Generating doxygen files....please wait" + ( + [ "$CLEAN" = "1" ] && rm -rf $OPENAIR_DIR/cmake_targets/doxygen/build + mkdir -p $OPENAIR_DIR/cmake_targets/doxygen/build + cd $OPENAIR_DIR/cmake_targets/doxygen/build + cmake .. + make doc + ) >& $doxygen_log + fi + # Auto-tests ##################### if [ "$OAI_TEST" = "1" ]; then From 8e1b5d26d466918be68053134175c94bf2e6c3c5 Mon Sep 17 00:00:00 2001 From: Rohit Gupta Date: Thu, 31 Dec 2015 09:06:10 +0100 Subject: [PATCH 03/55] doxygen support for USRP PHY Interface --- openair1/PHY/impl_defs_top.h | 9 +- targets/ARCH/COMMON/common_lib.h | 8 +- targets/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp | 107 +++++++++++++++++-- targets/DOCS/Doxyfile | 5 +- 4 files changed, 114 insertions(+), 15 deletions(-) diff --git a/openair1/PHY/impl_defs_top.h b/openair1/PHY/impl_defs_top.h index c84b7d3ece..5fe559b80d 100755 --- a/openair1/PHY/impl_defs_top.h +++ b/openair1/PHY/impl_defs_top.h @@ -44,7 +44,14 @@ /** @defgroup _ref_implementation_ OpenAirInterface LTE Implementation * @{ - * @defgroup _PHY_RF_INTERFACE_ Generic PHY - RF Interface + * @defgroup _PHY_RF_INTERFACE_ PHY - RF Interface + * @ingroup _PHY_RF_INTERFACE_ + * @{ + * @defgroup _GENERIC_PHY_RF_INTERFACE_ Generic PHY - RF Interface + * @defgroup _USRP_PHY_RF_INTERFACE_ PHY - USRP RF Interface + * @defgroup _BLADERF_PHY_RF_INTERFACE_ PHY - BLADERF RF Interface + * @} + * * @ingroup _ref_implementation_ * @{ * This module is responsible for defining the generic interface between PHY and RF Target diff --git a/targets/ARCH/COMMON/common_lib.h b/targets/ARCH/COMMON/common_lib.h index 5526118828..6f88641803 100644 --- a/targets/ARCH/COMMON/common_lib.h +++ b/targets/ARCH/COMMON/common_lib.h @@ -65,7 +65,7 @@ typedef enum { } duplex_mode_t; -/** @addtogroup _PHY_RF_INTERFACE_ +/** @addtogroup _GENERIC_PHY_RF_INTERFACE_ * @{ */ @@ -299,15 +299,15 @@ extern "C" */ int openair0_device_init(openair0_device* device, openair0_config_t *openair0_cfg); - //USRP - /*! \brief Get the current timestamp of USRP + /*! \brief Get current timestamp of USRP * \param device the hardware to use */ openair0_timestamp get_usrp_time(openair0_device *device); - /*! \brief Set the RX frequency of USRP RF TARGET + /*! \brief Set RX frequencies * \param device the hardware to use * \param openair0_cfg RF frontend parameters set by application + * \returns 0 in success */ int openair0_set_rx_frequencies(openair0_device* device, openair0_config_t *openair0_cfg); diff --git a/targets/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp b/targets/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp index b12f7397f0..e9671b0770 100644 --- a/targets/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp +++ b/targets/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp @@ -29,7 +29,7 @@ /** usrp_lib.cpp * - * Author: HongliangXU : hong-liang-xu@agilent.com + * \author: HongliangXU : hong-liang-xu@agilent.com */ #include @@ -54,47 +54,71 @@ # include #endif +/** @addtogroup _USRP_PHY_RF_INTERFACE_ + * @{ + */ + +/*! \brief USRP Configuration */ typedef struct { // -------------------------------- // variables for USRP configuration // -------------------------------- + //! USRP device pointer uhd::usrp::multi_usrp::sptr usrp; //uhd::usrp::multi_usrp::sptr rx_usrp; //create a send streamer and a receive streamer + //! USRP TX Stream uhd::tx_streamer::sptr tx_stream; + //! USRP RX Stream uhd::rx_streamer::sptr rx_stream; + //! USRP TX Metadata uhd::tx_metadata_t tx_md; + //! USRP RX Metadata uhd::rx_metadata_t rx_md; + //! USRP Timestamp Information uhd::time_spec_t tm_spec; + //setup variables and allocate buffer + //! USRP Metadata uhd::async_metadata_t async_md; + //! Sampling rate double sample_rate; - // time offset between transmiter timestamp and receiver timestamp; + + //! time offset between transmiter timestamp and receiver timestamp; double tdiff; - // use usrp_time_offset to get this value + + //! TX forward samples. We use usrp_time_offset to get this value int tx_forward_nsamps; //166 for 20Mhz // -------------------------------- // Debug and output control // -------------------------------- + //! Number of underflows int num_underflows; + //! Number of overflows int num_overflows; + + //! Number of sequential errors int num_seq_errors; - + //! tx count int64_t tx_count; + //! rx count int64_t rx_count; + //! timestamp of RX packet openair0_timestamp rx_timestamp; } usrp_state_t; - +/*! \brief Called to start the USRP transceiver. Return 0 if OK, < 0 if error + @param device pointer to the device structure specific to the RF hardware target +*/ static int trx_usrp_start(openair0_device *device) { usrp_state_t *s = (usrp_state_t*)device->priv; @@ -117,7 +141,9 @@ static int trx_usrp_start(openair0_device *device) return 0; } - +/*! \brief Terminate operation of the USRP transceiver -- free all associated resources + * \param device the hardware to use + */ static void trx_usrp_end(openair0_device *device) { usrp_state_t *s = (usrp_state_t*)device->priv; @@ -131,6 +157,14 @@ static void trx_usrp_end(openair0_device *device) } +/*! \brief Called to send samples to the USRP RF target + @param device pointer to the device structure specific to the RF hardware target + @param timestamp The timestamp at whicch the first sample MUST be sent + @param buff Buffer which holds the samples + @param nsamps number of samples to be sent + @param antenna_id index of the antenna if the device has multiple anteannas + @param flags flags must be set to TRUE if timestamp parameter needs to be applied +*/ static int trx_usrp_write(openair0_device *device, openair0_timestamp timestamp, void **buff, int nsamps, int cc, int flags) { usrp_state_t *s = (usrp_state_t*)device->priv; @@ -152,6 +186,17 @@ static int trx_usrp_write(openair0_device *device, openair0_timestamp timestamp, return 0; } +/*! \brief Receive samples from hardware. + * Read \ref nsamps samples from each channel to buffers. buff[0] is the array for + * the first channel. *ptimestamp is the time at which the first sample + * was received. + * \param device the hardware to use + * \param[out] ptimestamp the time at which the first sample was received. + * \param[out] buff An array of pointers to buffers for received samples. The buffers must be large enough to hold the number of samples \ref nsamps. + * \param nsamps Number of samples. One sample is 2 byte I + 2 byte Q => 4 byte. + * \param antenna_id Index of antenna for which to receive samples + * \returns the number of sample read +*/ static int trx_usrp_read(openair0_device *device, openair0_timestamp *ptimestamp, void **buff, int nsamps, int cc) { usrp_state_t *s = (usrp_state_t*)device->priv; @@ -237,6 +282,9 @@ static int trx_usrp_read(openair0_device *device, openair0_timestamp *ptimestamp return samples_received; } +/*! \brief Get current timestamp of USRP + * \param device the hardware to use +*/ openair0_timestamp get_usrp_time(openair0_device *device) { @@ -245,11 +293,21 @@ openair0_timestamp get_usrp_time(openair0_device *device) return s->usrp->get_time_now().to_ticks(s->sample_rate); } +/*! \brief Compares two variables within precision + * \param a first variable + * \param b second variable +*/ static bool is_equal(double a, double b) { return std::fabs(a-b) < std::numeric_limits::epsilon(); } +/*! \brief Set frequencies (TX/RX) + * \param device the hardware to use + * \param openair0_cfg RF frontend parameters set by application + * \param dummy dummy variable not used + * \returns 0 in success + */ int trx_usrp_set_freq(openair0_device* device, openair0_config_t *openair0_cfg, int dummy) { usrp_state_t *s = (usrp_state_t*)device->priv; @@ -261,6 +319,11 @@ int trx_usrp_set_freq(openair0_device* device, openair0_config_t *openair0_cfg, } +/*! \brief Set RX frequencies + * \param device the hardware to use + * \param openair0_cfg RF frontend parameters set by application + * \returns 0 in success + */ int openair0_set_rx_frequencies(openair0_device* device, openair0_config_t *openair0_cfg) { usrp_state_t *s = (usrp_state_t*)device->priv; @@ -278,6 +341,11 @@ int openair0_set_rx_frequencies(openair0_device* device, openair0_config_t *open } +/*! \brief Set Gains (TX/RX) + * \param device the hardware to use + * \param openair0_cfg RF frontend parameters set by application + * \returns 0 in success + */ int trx_usrp_set_gains(openair0_device* device, openair0_config_t *openair0_cfg) { @@ -298,11 +366,14 @@ int trx_usrp_set_gains(openair0_device* device, return(0); } +/*! \brief Stop USRP + * \param card refers to the hardware index to use + */ int trx_usrp_stop(int card) { return(0); } - +/*! \brief USRPB210 RX calibration table */ rx_gain_calib_table_t calib_table_b210[] = { {3500000000.0,46.0}, {2660000000.0,53.0}, @@ -311,6 +382,7 @@ rx_gain_calib_table_t calib_table_b210[] = { {816000000.0,62.0}, {-1,0}}; +/*! \brief USRPx310 RX calibration table */ rx_gain_calib_table_t calib_table_x310[] = { {3500000000.0,77.0}, {2660000000.0,80.0}, @@ -319,6 +391,11 @@ rx_gain_calib_table_t calib_table_x310[] = { {816000000.0,85.0}, {-1,0}}; +/*! \brief Set RX gain offset + * \param openair0_cfg RF frontend parameters set by application + * \param chain_index RF chain to apply settings to + * \returns 0 in success + */ void set_rx_gain_offset(openair0_config_t *openair0_cfg, int chain_index) { int i=0; @@ -340,19 +417,30 @@ void set_rx_gain_offset(openair0_config_t *openair0_cfg, int chain_index) { } - +/*! \brief print the USRP statistics +* \param device the hardware to use +* \returns 0 on success +*/ int trx_usrp_get_stats(openair0_device* device) { return(0); } + +/*! \brief Reset the USRP statistics +* \param device the hardware to use +* \returns 0 on success +*/ int trx_usrp_reset_stats(openair0_device* device) { return(0); } - +/*! \brief Initialize Openair USRP target. It returns 0 if OK +* \param device the hardware to use +* \param openair0_cfg RF frontend parameters set by application +*/ int openair0_dev_init_usrp(openair0_device* device, openair0_config_t *openair0_cfg) { uhd::set_thread_priority_safe(1.0); @@ -584,3 +672,4 @@ int openair0_dev_init_usrp(openair0_device* device, openair0_config_t *openair0_ s->tx_forward_nsamps = 50; return 0; } +/*@}*/ diff --git a/targets/DOCS/Doxyfile b/targets/DOCS/Doxyfile index 0d32a3ffad..7ebc15f674 100644 --- a/targets/DOCS/Doxyfile +++ b/targets/DOCS/Doxyfile @@ -793,7 +793,10 @@ INPUT = $(OPENAIR1_DIR)/PHY/defs.h \ $(OPENAIR2_DIR)/LAYER2/RLC/UM_v9.3.0/rlc_um.h \ $(OPENAIR2_DIR)/LAYER2/RLC/UM_v9.3.0/rlc_um_entity.h \ $(OPENAIR2_DIR)/NETWORK_DRIVER/MESH/proto_extern.h \ - $(OPENAIR_TARGETS)/ARCH/COMMON/common_lib.h + $(OPENAIR_TARGETS)/ARCH/COMMON/common_lib.h \ + $(OPENAIR_TARGETS)/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp \ + $(OPENAIR_TARGETS)/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp \ + $(OPENAIR_TARGETS)/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses From b212daa4d3470c7c67d00c6219b0382b8bc13d13 Mon Sep 17 00:00:00 2001 From: Rohit Gupta Date: Thu, 31 Dec 2015 09:48:26 +0100 Subject: [PATCH 04/55] doxygen support for BladeRF - PHY Interface --- .../ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.c | 81 +++++++++++++++++-- .../ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.h | 39 +++++++-- targets/DOCS/Doxyfile | 4 +- 3 files changed, 109 insertions(+), 15 deletions(-) diff --git a/targets/ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.c b/targets/ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.c index d515a206ae..b9bcf8ed2a 100644 --- a/targets/ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.c +++ b/targets/ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.c @@ -38,15 +38,26 @@ #include #include "bladerf_lib.h" +/** @addtogroup _BLADERF_PHY_RF_INTERFACE_ + * @{ + */ + +//! Number of BladeRF devices int num_devices=0; + /*These items configure the underlying asynch stream used by the the sync interface. */ -int trx_brf_init(openair0_device *openair0) { +/*! \brief BladeRF Init function (not used at the moment) + * \param device RF frontend parameters set by application + */ +int trx_brf_init(openair0_device *device) { } - +/*! \brief get current timestamp + *\param device the hardware to use + */ openair0_timestamp trx_get_timestamp(openair0_device *device) { int status; struct bladerf_metadata meta; @@ -60,17 +71,29 @@ openair0_timestamp trx_get_timestamp(openair0_device *device) { return meta.timestamp; } - -int trx_brf_start(openair0_device *openair0) { +/*! \brief Start BladeRF + *\param device the hardware to use + */ +int trx_brf_start(openair0_device *device) { return 0; } +/*! \brief Get BladeRF stats + *\param device the hardware to use + */ static void trx_brf_stats(openair0_device *device){ } +/*! \brief Called to send samples to the BladeRF RF target + @param device pointer to the device structure specific to the RF hardware target + @param timestamp The timestamp at whicch the first sample MUST be sent + @param buff Buffer which holds the samples + @param nsamps number of samples to be sent + @param cc index of the component carrier +*/ static int trx_brf_write(openair0_device *device,openair0_timestamp ptimestamp, void **buff, int nsamps, int cc) { int status, i; @@ -106,6 +129,16 @@ static int trx_brf_write(openair0_device *device,openair0_timestamp ptimestamp, return(0); } +/*! \brief Receive samples from hardware. + * Read \ref nsamps samples from each channel to buffers. buff[0] is the array for + * the first channel. *ptimestamp is the time at which the first sample + * was received. + * \param device the hardware to use + * \param[out] ptimestamp the time at which the first sample was received. + * \param[out] buff An array of pointers to buffers for received samples. The buffers must be large enough to hold the number of samples \ref nsamps. + * \param nsamps Number of samples. One sample is 2 byte I + 2 byte Q => 4 byte. + * \param cc Index of component carrier +*/ static int trx_brf_read(openair0_device *device, openair0_timestamp *ptimestamp, void **buff, int nsamps, int cc) { int status, ret; @@ -140,6 +173,9 @@ static int trx_brf_read(openair0_device *device, openair0_timestamp *ptimestamp, } +/*! \brief Terminate operation of the BladeRF transceiver -- free all associated resources + * \param device the hardware to use + */ int trx_brf_end(openair0_device *device) { int status; @@ -155,36 +191,59 @@ int trx_brf_end(openair0_device *device) { return 0; } - +/*! \brief print the BladeRF statistics +* \param device the hardware to use +* \returns 0 on success +*/ int trx_brf_get_stats(openair0_device* device) { return(0); } +/*! \brief Reset the BladeRF statistics +* \param device the hardware to use +* \returns 0 on success +*/ int trx_brf_reset_stats(openair0_device* device) { return(0); } +/*! \brief Stop USRP + * \param device the hardware to use + */ int trx_brf_stop(openair0_device* device) { return(0); } +/*! \brief Set frequencies (TX/RX) + * \param device the hardware to use + * \returns 0 in success + */ int trx_brf_set_freq(openair0_device* device) { return(0); } + +/*! \brief Set Gains (TX/RX) + * \param device the hardware to use + * \returns 0 in success + */ int trx_brf_set_gains(openair0_device* device) { return(0); } +/*! \brief Initialize Openair BLADERF target. It returns 0 if OK + * \param device the hardware to use + * \param openair0_cfg RF frontend parameters set by application + */ int openair0_dev_init_bladerf(openair0_device *device, openair0_config_t *openair0_cfg) { int status; @@ -322,6 +381,9 @@ int openair0_dev_init_bladerf(openair0_device *device, openair0_config_t *openai return 0; } +/*! \brief bladeRF error report + * \param status + */ int brf_error(int status) { //exit(-1); @@ -329,7 +391,9 @@ int brf_error(int status) { } - +/*! \brief Open BladeRF from serial port + * \param serial name of serial port on which to open BladeRF device + */ struct bladerf * open_bladerf_from_serial(const char *serial) { int status; @@ -356,6 +420,10 @@ struct bladerf * open_bladerf_from_serial(const char *serial) { return dev; } } + +/*! \brief Get BladeRF log level + * \param log_level log level + */ int get_brf_log_level(int log_level){ int level=BLADERF_LOG_LEVEL_INFO; @@ -384,3 +452,4 @@ int get_brf_log_level(int log_level){ } return level; } +/*@}*/ diff --git a/targets/ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.h b/targets/ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.h index 15e1d39da7..3a05c80e5c 100644 --- a/targets/ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.h +++ b/targets/ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.h @@ -37,45 +37,69 @@ #include "common_lib.h" #include "log.h" +/** @addtogroup _BLADERF_PHY_RF_INTERFACE_ + * @{ + */ + +/*! \brief BladeRF specific data structure */ typedef struct { - // opaque BRF data struct + //! opaque BladeRF device struct. An empty ("") or NULL device identifier will result in the first encountered device being opened (using the first discovered backend) struct bladerf *dev; - // An empty ("") or NULL device identifier will result in the first encountered device being opened (using the first discovered backend) - + + //! Number of buffers unsigned int num_buffers; + //! Buffer size unsigned int buffer_size; + //! Number of transfers unsigned int num_transfers; + //! RX timeout unsigned int rx_timeout_ms; + //! TX timeout unsigned int tx_timeout_ms; - + //! Metadata for RX struct bladerf_metadata meta_rx; + //!Metadata for TX struct bladerf_metadata meta_tx; - + //! Sample rate unsigned int sample_rate; - // time offset between transmiter timestamp and receiver timestamp; + //! time offset between transmiter timestamp and receiver timestamp; double tdiff; - // use brf_time_offset to get this value + //! TX number of forward samples use brf_time_offset to get this value int tx_forward_nsamps; //166 for 20Mhz // -------------------------------- // Debug and output control // -------------------------------- + //! Number of underflows int num_underflows; + //! Number of overflows int num_overflows; + //! number of sequential errors int num_seq_errors; + //! number of RX errors int num_rx_errors; + //! Number of TX errors int num_tx_errors; + //! timestamp of current TX uint64_t tx_current_ts; + //! timestamp of current RX uint64_t rx_current_ts; + //! number of actual samples transmitted uint64_t tx_actual_nsamps; + //! number of actual samples received uint64_t rx_actual_nsamps; + //! number of TX samples uint64_t tx_nsamps; + //! number of RX samples uint64_t rx_nsamps; + //! number of TX count uint64_t tx_count; + //! number of RX count uint64_t rx_count; + //! timestamp of RX packet openair0_timestamp rx_timestamp; } brf_state_t; @@ -84,3 +108,4 @@ typedef struct { */ int brf_error(int status); +/*@}*/ diff --git a/targets/DOCS/Doxyfile b/targets/DOCS/Doxyfile index 7ebc15f674..ac6ee99480 100644 --- a/targets/DOCS/Doxyfile +++ b/targets/DOCS/Doxyfile @@ -795,8 +795,8 @@ INPUT = $(OPENAIR1_DIR)/PHY/defs.h \ $(OPENAIR2_DIR)/NETWORK_DRIVER/MESH/proto_extern.h \ $(OPENAIR_TARGETS)/ARCH/COMMON/common_lib.h \ $(OPENAIR_TARGETS)/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp \ - $(OPENAIR_TARGETS)/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp \ - $(OPENAIR_TARGETS)/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp + $(OPENAIR_TARGETS)/ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.c \ + $(OPENAIR_TARGETS)/ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.h # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses From 191e93cc91853e9228e02456241d1edad6958c50 Mon Sep 17 00:00:00 2001 From: Raymond Knopp Date: Mon, 25 Jan 2016 01:13:24 -0800 Subject: [PATCH 05/55] basic skeleton for SoDeRa OAI library --- cmake_targets/CMakeLists.txt | 22 +- cmake_targets/build_oai | 8 +- targets/ARCH/COMMON/common_lib.c | 8 +- targets/ARCH/COMMON/common_lib.h | 3 + .../ARCH/SODERA/USERSPACE/LIB/sodera_lib.cpp | 442 ++++++++++++++++++ 5 files changed, 476 insertions(+), 7 deletions(-) create mode 100644 targets/ARCH/SODERA/USERSPACE/LIB/sodera_lib.cpp diff --git a/cmake_targets/CMakeLists.txt b/cmake_targets/CMakeLists.txt index f52a3c465f..d359b231b4 100644 --- a/cmake_targets/CMakeLists.txt +++ b/cmake_targets/CMakeLists.txt @@ -159,7 +159,7 @@ set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_FCNTL_H=1 -DHAVE_ARPA_INET_H=1 -DHAVE_SYS_TIME_H=1 -DHAVE_SYS_SOCKET_H=1 -DHAVE_STRERROR=1 -DHAVE_SOCKET=1 -DHAVE_MEMSET=1 -DHAVE_GETTIMEOFDAY=1 -DHAVE_STDLIB_H=1 -DHAVE_MALLOC=1 -DHAVE_LIBSCTP" ) set(CMAKE_CXX_FLAGS - "${CMAKE_CXX_FLAGS} ${C_FLAGS_PROCESSOR}" + "${CMAKE_CXX_FLAGS} ${C_FLAGS_PROCESSOR} -std=c++11 " ) # set a flag for changes in the source code # these changes are related to hardcoded path to include .h files @@ -167,6 +167,7 @@ add_definitions(-DCMAKER) set(CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS} -g -DMALLOC_CHECK_=3") set(CMAKE_C_FLAGS_RELWITHDEBINFO "${CMAKE_C_FLAGS} -g -DMALLOC_CHECK_=3 -O2") +Message("RF_BOARD is ${RF_BOARD}") # Below has been put in comment because does not work with # SVN authentication. # @@ -404,7 +405,9 @@ add_list1_option(NB_ANTENNAS_RX "2" "Number of antennas in reception" "1" "2" "4 add_list1_option(NB_ANTENNAS_TX "2" "Number of antennas in transmission" "1" "2" "4") add_list1_option(NB_ANTENNAS_TXRX "2" "Number of antennas in ????" "1" "2" "4") -add_list2_option(RF_BOARD "EXMIMO" "RF head type" "False" "EXMIMO" "OAI_USRP" "ETHERNET" "OAI_BLADERF" "CPRIGW") +add_list2_option(RF_BOARD "EXMIMO" "RF head type" "False" "EXMIMO" "OAI_USRP" "ETHERNET" "OAI_BLADERF" "OAI_SODERA" "CPRIGW") + +Message("RF_BOARD is ${RF_BOARD}") if (${RF_BOARD} STREQUAL "EXMIMO") set(DRIVER2013) @@ -434,6 +437,19 @@ elseif (${RF_BOARD} STREQUAL "OAI_BLADERF") set(option_HW_lib "bladeRF") #set(LOWLATENCY False) +elseif (${RF_BOARD} STREQUAL "OAI_SODERA") + include_directories("${OPENAIR_TARGETS}/ARCH/SODERA/USERSPACE/LIB/") + include_directories("${OPENAIR_TARGETS}/ARCH/SODERA/USERSPACE/LIB/SoDeRaV1_distro_01v/lms7suite_source_code/src/lms7002m") + include_directories("${OPENAIR_TARGETS}/ARCH/SODERA/USERSPACE/LIB/SoDeRaV1_distro_01v/lms7suite_source_code/src/Si5351C") + set(HW_SOURCE ${HW_SOURCE} + ${OPENAIR_TARGETS}/ARCH/SODERA/USERSPACE/LIB/sodera_lib.cpp + ) + LINK_DIRECTORIES("${OPENAIR_TARGETS}/ARCH/SODERA/USERSPACE/LIB/SoDeRaV1_distro_01v/lms7suite_source_code/build/lms7002m") + LINK_DIRECTORIES("/usr/lib/x86_64-linux-gnu") + set(option_HW_lib "usb-1.0") + set(LMS7002_LIB "libLMS7002M.a") + #set(LOWLATENCY False) + elseif (${RF_BOARD} STREQUAL "ETHERNET") include_directories ("${OPENAIR_TARGETS}/ARCH/ETHERNET/USERSPACE/LIB") set(HW_SOURCE ${HW_SOURCE} @@ -1431,7 +1447,7 @@ add_executable(lte-softmodem target_link_libraries (lte-softmodem -Wl,--start-group - RRC_LIB S1AP_LIB S1AP_ENB GTPV1U SECU_CN SECU_OSA UTIL HASHTABLE SCTP_CLIENT UDP SCHED_LIB PHY LFDS L2 ${MSC_LIB} ${RAL_LIB} ${NAS_UE_LIB} ${ITTI_LIB} ${MIH_LIB} + RRC_LIB S1AP_LIB S1AP_ENB GTPV1U SECU_CN SECU_OSA UTIL HASHTABLE SCTP_CLIENT UDP SCHED_LIB PHY LFDS L2 ${MSC_LIB} ${RAL_LIB} ${NAS_UE_LIB} ${ITTI_LIB} ${MIH_LIB} ${LMS7002_LIB} -Wl,--end-group ) diff --git a/cmake_targets/build_oai b/cmake_targets/build_oai index c723d8d6dc..4a18e53f47 100755 --- a/cmake_targets/build_oai +++ b/cmake_targets/build_oai @@ -90,7 +90,7 @@ Options default is Rel10, Rel8 limits the implementation to 3GPP Release 8 version -w | --hardware - EXMIMO (Default), USRP, BLADERF, ETHERNET, None + EXMIMO (Default), USRP, BLADERF, SODERA, ETHERNET, None Adds this RF board support (in external packages installation and in compilation) --oaisim Makes the oaisim simulator. Hardware will be defaulted to "NONE". @@ -181,6 +181,9 @@ function main() { if [ "$HW" == "BLADERF" ] ; then HW="OAI_BLADERF" fi + if [ "$HW" == "SODERA" ] ; then + HW="OAI_SODERA" + fi echo_info "setting hardware to: $HW" shift 2;; --oaisim) @@ -249,6 +252,7 @@ function main() { esac done + echo_info "RF HW set to $HW" #Now we set flags to enable deadline scheduler settings #By default: USRP: disable, #By default: BLADERF: enable, @@ -262,6 +266,8 @@ function main() { LOWLATENCY_FLAG_USER="False" elif [ "$HW" = "OAI_BLADERF" ] ; then LOWLATENCY_FLAG_USER="False" + elif [ "$HW" = "OAI_SODERA" ] ; then + LOWLATENCY_FLAG_USER="False" elif [ "$HW" = "None" ] ; then LOWLATENCY_FLAG_USER="False" else diff --git a/targets/ARCH/COMMON/common_lib.c b/targets/ARCH/COMMON/common_lib.c index bdf0e46278..8ee25c5fda 100644 --- a/targets/ARCH/COMMON/common_lib.c +++ b/targets/ARCH/COMMON/common_lib.c @@ -57,12 +57,14 @@ int openair0_device_init(openair0_device *device, openair0_config_t *openair0_cf openair0_dev_init_usrp(device, openair0_cfg); printf("openair0_dev_init_usrp ...\n"); return(openair0_dev_init_usrp(device, openair0_cfg)); - #elif OAI_BLADERF device->type=BLADERF_IF; printf(" openair0_dev_init_bladerf ...\n"); return(openair0_dev_init_bladerf(device, openair0_cfg)); - -#endif +#elif OAI_SODERA + device->type=OAI_SODERA; + printf(" openair0_dev_init_sodera ...\n"); + return(openair0_dev_init_sodera(device, openair0_cfg)); +#endif } diff --git a/targets/ARCH/COMMON/common_lib.h b/targets/ARCH/COMMON/common_lib.h index a3fe9e9dbd..8eaf3f781a 100644 --- a/targets/ARCH/COMMON/common_lib.h +++ b/targets/ARCH/COMMON/common_lib.h @@ -164,6 +164,8 @@ typedef enum { USRP_X300_IF, /*!\brief device is BLADE RF*/ BLADERF_IF, + /*!\brief device is SODERA RF*/ + SODERARF_IF, /*!\brief device is NONE*/ NONE_IF, MAX_DEV_TYPE @@ -295,6 +297,7 @@ extern "C" /*! \brief Initialize Openair ETHERNET target. It returns 0 if OK */ int openair0_dev_init_eth(openair0_device *device, openair0_config_t *openair0_cfg); int openair0_dev_init_bladerf(openair0_device *device, openair0_config_t *openair0_cfg); + int openair0_dev_init_sodera(openair0_device *device, openair0_config_t *openair0_cfg); int openair0_dev_init_usrp(openair0_device* device, openair0_config_t *openair0_cfg); int openair0_dev_init_exmimo(openair0_device *device, openair0_config_t *openair0_cfg); /*@}*/ diff --git a/targets/ARCH/SODERA/USERSPACE/LIB/sodera_lib.cpp b/targets/ARCH/SODERA/USERSPACE/LIB/sodera_lib.cpp new file mode 100644 index 0000000000..f8257fccf8 --- /dev/null +++ b/targets/ARCH/SODERA/USERSPACE/LIB/sodera_lib.cpp @@ -0,0 +1,442 @@ +/******************************************************************************* + OpenAirInterface + Copyright(c) 1999 - 2014 Eurecom + + OpenAirInterface is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + + OpenAirInterface is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with OpenAirInterface.The full GNU General Public License is + included in this distribution in the file called "COPYING". If not, + see . + + Contact Information + OpenAirInterface Admin: openair_admin@eurecom.fr + OpenAirInterface Tech : openair_tech@eurecom.fr + OpenAirInterface Dev : openair4g-devel@lists.eurecom.fr + + Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE + + *******************************************************************************/ + +/** sodera_lib.c + * + * Author: Raymond Knopp + */ + + +#include +#include +#include +#include +#include +#include + + +#include +#include +#include +#include + +#include "common_lib.h" + +#include "lmsComms.h" +#include "Si5351C.h" +#ifdef __SSE4_1__ +# include +#endif + +#ifdef __AVX2__ +# include +#endif + +int num_devices=0; +/*These items configure the underlying asynch stream used by the the sync interface. + */ + +typedef struct +{ + + // -------------------------------- + // variables for SoDeRa configuration + // -------------------------------- + /* + uhd::usrp::multi_usrp::sptr usrp; + //uhd::usrp::multi_usrp::sptr rx_usrp; + + //create a send streamer and a receive streamer + uhd::tx_streamer::sptr tx_stream; + uhd::rx_streamer::sptr rx_stream; + + uhd::tx_metadata_t tx_md; + uhd::rx_metadata_t rx_md; + + uhd::time_spec_t tm_spec; + //setup variables and allocate buffer + uhd::async_metadata_t async_md; + */ + + LMScomms mDataPort; + + double sample_rate; + // time offset between transmiter timestamp and receiver timestamp; + double tdiff; + + // -------------------------------- + // Debug and output control + // -------------------------------- + int num_underflows; + int num_overflows; + int num_seq_errors; + + int64_t tx_count; + int64_t rx_count; + openair0_timestamp rx_timestamp; + +} sodera_state_t; + + +static int trx_sodera_start(openair0_device *device) +{ + sodera_state_t *s = (sodera_state_t*)device->priv; + + // init recv and send streaming + + s->rx_count = 0; + s->tx_count = 0; + s->rx_timestamp = 0; + + return 0; +} + +static void trx_sodera_end(openair0_device *device) +{ + sodera_state_t *s = (sodera_state_t*)device->priv; + + + +} + +static int trx_sodera_write(openair0_device *device, openair0_timestamp timestamp, void **buff, int nsamps, int cc, int flags) +{ + sodera_state_t *s = (sodera_state_t*)device->priv; + + if (cc>1) { + // s->tx_stream->send(buff_ptrs, nsamps, s->tx_md); + } + else + // s->tx_stream->send(buff[0], nsamps, s->tx_md); + + return 0; +} + +static int trx_sodera_read(openair0_device *device, openair0_timestamp *ptimestamp, void **buff, int nsamps, int cc) +{ + sodera_state_t *s = (sodera_state_t*)device->priv; + int samples_received=0,i,j; + int nsamps2; // aligned to upper 32 or 16 byte boundary +#if defined(__x86_64) || defined(__i386__) +#ifdef __AVX2__ + __m256i buff_tmp[2][nsamps>>3]; + nsamps2 = (nsamps+7)>>3; +#else + __m128i buff_tmp[2][nsamps>>2]; + nsamps2 = (nsamps+3)>>2; +#endif +#elif defined(__arm__) + int16x8_t buff_tmp[2][nsamps>>2]; + nsamps2 = (nsamps+3)>>2; +#endif + + + if (cc>1) { + // receive multiple channels (e.g. RF A and RF B) + + } else { + // receive a single channel (e.g. from connector RF A) + + } + + if (samples_received < nsamps) { + printf("[recv] received %d samples out of %d\n",samples_received,nsamps); + + } + + //handle the error code + + s->rx_count += nsamps; + // s->rx_timestamp = s->rx_md.time_spec.to_ticks(s->sample_rate); + *ptimestamp = s->rx_timestamp; + + return samples_received; +} + + + +static bool is_equal(double a, double b) +{ + return fabs(a-b) < 1e-6; +} + +int trx_sodera_set_freq(openair0_device* device, openair0_config_t *openair0_cfg, int dummy) { + + sodera_state_t *s = (sodera_state_t*)device->priv; + + // s->usrp->set_tx_freq(openair0_cfg[0].tx_freq[0]); + // s->usrp->set_rx_freq(openair0_cfg[0].rx_freq[0]); + + return(0); + +} + +int openair0_set_rx_frequencies(openair0_device* device, openair0_config_t *openair0_cfg) { + + sodera_state_t *s = (sodera_state_t*)device->priv; + static int first_call=1; + static double rf_freq,diff; + + // uhd::tune_request_t rx_tune_req(openair0_cfg[0].rx_freq[0]); + + // rx_tune_req.rf_freq_policy = uhd::tune_request_t::POLICY_MANUAL; + // rx_tune_req.rf_freq = openair0_cfg[0].rx_freq[0]; + // rf_freq=openair0_cfg[0].rx_freq[0]; + // s->usrp->set_rx_freq(rx_tune_req); + + return(0); + +} + +int trx_sodera_set_gains(openair0_device* device, + openair0_config_t *openair0_cfg) { + + sodera_state_t *s = (sodera_state_t*)device->priv; + + // s->usrp->set_tx_gain(openair0_cfg[0].tx_gain[0]); + // ::uhd::gain_range_t gain_range = s->usrp->get_rx_gain_range(0); + // limit to maximum gain + /* if (openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0] > gain_range.stop()) { + + printf("RX Gain 0 too high, reduce by %f dB\n", + openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0] - gain_range.stop()); + exit(-1); + } + s->usrp->set_rx_gain(openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0]); + printf("Setting SODERA RX gain to %f (rx_gain %f,gain_range.stop() %f)\n", openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0],openair0_cfg[0].rx_gain[0],gain_range.stop()); + */ + return(0); +} + +int trx_sodera_stop(int card) { + return(0); +} + + +rx_gain_calib_table_t calib_table_sodera[] = { + {3500000000.0,44.0}, + {2660000000.0,49.0}, + {2300000000.0,50.0}, + {1880000000.0,53.0}, + {816000000.0,58.0}, + {-1,0}}; + +void set_rx_gain_offset(openair0_config_t *openair0_cfg, int chain_index,int bw_gain_adjust) { + + int i=0; + // loop through calibration table to find best adjustment factor for RX frequency + double min_diff = 6e9,diff,gain_adj=0.0; + if (bw_gain_adjust==1) { + switch ((int)openair0_cfg[0].sample_rate) { + case 30720000: + break; + case 23040000: + gain_adj=1.25; + break; + case 15360000: + gain_adj=3.0; + break; + case 7680000: + gain_adj=6.0; + break; + case 3840000: + gain_adj=9.0; + break; + case 1920000: + gain_adj=12.0; + break; + default: + printf("unknown sampling rate %d\n",(int)openair0_cfg[0].sample_rate); + exit(-1); + break; + } + } + while (openair0_cfg->rx_gain_calib_table[i].freq>0) { + diff = fabs(openair0_cfg->rx_freq[chain_index] - openair0_cfg->rx_gain_calib_table[i].freq); + printf("cal %d: freq %f, offset %f, diff %f\n", + i, + openair0_cfg->rx_gain_calib_table[i].freq, + openair0_cfg->rx_gain_calib_table[i].offset,diff); + if (min_diff > diff) { + min_diff = diff; + openair0_cfg->rx_gain_offset[chain_index] = openair0_cfg->rx_gain_calib_table[i].offset+gain_adj; + } + i++; + } + +} + + +int trx_sodera_get_stats(openair0_device* device) { + + return(0); + +} +int trx_sodera_reset_stats(openair0_device* device) { + + return(0); + +} + + +int openair0_dev_init_sodera(openair0_device* device, openair0_config_t *openair0_cfg) +{ + + sodera_state_t *s = (sodera_state_t*)malloc(sizeof(sodera_state_t)); + size_t i; + memset(s, 0, sizeof(sodera_state_t)); + + // Initialize SODERA device + if (!s->mDataPort.Open(0)) { + printf("Cannot open SoDeRa\n"); + exit(-1); + } + + + int vers=0,subvers=0,subsubvers=0; + int bw_gain_adjust=0; + + + openair0_cfg[0].rx_gain_calib_table = calib_table_sodera; + + switch ((int)openair0_cfg[0].sample_rate) { + case 30720000: + // from usrp_time_offset + openair0_cfg[0].samples_per_packet = 2048; + openair0_cfg[0].tx_sample_advance = 15; + openair0_cfg[0].tx_bw = 20e6; + openair0_cfg[0].rx_bw = 20e6; + openair0_cfg[0].tx_scheduling_advance = 8*openair0_cfg[0].samples_per_packet; + break; + case 15360000: + openair0_cfg[0].samples_per_packet = 2048; + openair0_cfg[0].tx_sample_advance = 45; + openair0_cfg[0].tx_bw = 10e6; + openair0_cfg[0].rx_bw = 10e6; + openair0_cfg[0].tx_scheduling_advance = 5*openair0_cfg[0].samples_per_packet; + break; + case 7680000: + openair0_cfg[0].samples_per_packet = 1024; + openair0_cfg[0].tx_sample_advance = 50; + openair0_cfg[0].tx_bw = 5e6; + openair0_cfg[0].rx_bw = 5e6; + openair0_cfg[0].tx_scheduling_advance = 5*openair0_cfg[0].samples_per_packet; + break; + case 1920000: + openair0_cfg[0].samples_per_packet = 256; + openair0_cfg[0].tx_sample_advance = 50; + openair0_cfg[0].tx_bw = 1.25e6; + openair0_cfg[0].rx_bw = 1.25e6; + openair0_cfg[0].tx_scheduling_advance = 8*openair0_cfg[0].samples_per_packet; + break; + default: + printf("Error: unknown sampling rate %f\n",openair0_cfg[0].sample_rate); + exit(-1); + break; + } + + /* + for(i=0;iusrp->get_rx_num_channels();i++) { + if (iusrp->set_rx_rate(openair0_cfg[0].sample_rate,i); + s->usrp->set_rx_bandwidth(openair0_cfg[0].rx_bw,i); + printf("Setting rx freq/gain on channel %lu/%lu : BW %f (readback %f)\n",i,s->usrp->get_rx_num_channels(),openair0_cfg[0].rx_bw/1e6,s->usrp->get_rx_bandwidth(i)/1e6); + s->usrp->set_rx_freq(openair0_cfg[0].rx_freq[i],i); + set_rx_gain_offset(&openair0_cfg[0],i,bw_gain_adjust); + + ::uhd::gain_range_t gain_range = s->usrp->get_rx_gain_range(i); + // limit to maximum gain + if (openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i] > gain_range.stop()) { + + printf("RX Gain %lu too high, lower by %f dB\n",i,openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i] - gain_range.stop()); + exit(-1); + } + s->usrp->set_rx_gain(openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i],i); + printf("RX Gain %lu %f (%f) => %f (max %f)\n",i, + openair0_cfg[0].rx_gain[i],openair0_cfg[0].rx_gain_offset[i], + openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i],gain_range.stop()); + } + } + for(i=0;iusrp->get_tx_num_channels();i++) { + if (iusrp->set_tx_rate(openair0_cfg[0].sample_rate,i); + s->usrp->set_tx_bandwidth(openair0_cfg[0].tx_bw,i); + printf("Setting tx freq/gain on channel %lu/%lu: BW %f (readback %f)\n",i,s->usrp->get_tx_num_channels(),openair0_cfg[0].tx_bw/1e6,s->usrp->get_tx_bandwidth(i)/1e6); + s->usrp->set_tx_freq(openair0_cfg[0].tx_freq[i],i); + s->usrp->set_tx_gain(openair0_cfg[0].tx_gain[i],i); + } + } + */ + + // create tx & rx streamer + + //stream_args_rx.args["spp"] = str(boost::format("%d") % 2048);//(openair0_cfg[0].rx_num_channels*openair0_cfg[0].samples_per_packet)); + + /* + for (i=0;iusrp->get_rx_rate(i)/1e6) << std::endl; + std::cout << boost::format("Actual RX frequency: %fGHz...") % (s->usrp->get_rx_freq(i)/1e9) << std::endl; + std::cout << boost::format("Actual RX gain: %f...") % (s->usrp->get_rx_gain(i)) << std::endl; + std::cout << boost::format("Actual RX bandwidth: %fM...") % (s->usrp->get_rx_bandwidth(i)/1e6) << std::endl; + std::cout << boost::format("Actual RX antenna: %s...") % (s->usrp->get_rx_antenna(i)) << std::endl; + } + } + + for (i=0;iusrp->get_tx_rate(i)/1e6) << std::endl; + std::cout << boost::format("Actual TX frequency: %fGHz...") % (s->usrp->get_tx_freq(i)/1e9) << std::endl; + std::cout << boost::format("Actual TX gain: %f...") % (s->usrp->get_tx_gain(i)) << std::endl; + std::cout << boost::format("Actual TX bandwidth: %fM...") % (s->usrp->get_tx_bandwidth(i)/1e6) << std::endl; + std::cout << boost::format("Actual TX antenna: %s...") % (s->usrp->get_tx_antenna(i)) << std::endl; + } + } + */ + + + device->priv = s; + device->trx_start_func = trx_sodera_start; + device->trx_write_func = trx_sodera_write; + device->trx_read_func = trx_sodera_read; + device->trx_get_stats_func = trx_sodera_get_stats; + device->trx_reset_stats_func = trx_sodera_reset_stats; + device->trx_end_func = trx_sodera_end; + device->trx_stop_func = trx_sodera_stop; + device->trx_set_freq_func = trx_sodera_set_freq; + device->trx_set_gains_func = trx_sodera_set_gains; + + s->sample_rate = openair0_cfg[0].sample_rate; + // TODO: + + return 0; +} From de3ba76b2f0608df77bde76d2ed82700b02a0160 Mon Sep 17 00:00:00 2001 From: kaltenbe Date: Tue, 26 Jan 2016 01:21:59 +0100 Subject: [PATCH 06/55] first steps of SoDeRa configuration --- cmake_targets/CMakeLists.txt | 12 +- targets/ARCH/COMMON/common_lib.c | 9 +- targets/ARCH/COMMON/common_lib.h | 3 +- .../ARCH/SODERA/USERSPACE/LIB/sodera_lib.cpp | 155 ++- targets/ARCH/SODERA/lms7_trx_LTE_mimo_RF.ini | 1128 +++++++++++++++++ targets/ARCH/SODERA/lms7_trx_LTE_mimo_TSG.ini | 1128 +++++++++++++++++ .../CONF/enb.band4.tm1.usrpb210.conf | 12 +- targets/RT/USER/lte-softmodem.c | 21 +- 8 files changed, 2397 insertions(+), 71 deletions(-) create mode 100644 targets/ARCH/SODERA/lms7_trx_LTE_mimo_RF.ini create mode 100644 targets/ARCH/SODERA/lms7_trx_LTE_mimo_TSG.ini diff --git a/cmake_targets/CMakeLists.txt b/cmake_targets/CMakeLists.txt index d359b231b4..84bf183991 100644 --- a/cmake_targets/CMakeLists.txt +++ b/cmake_targets/CMakeLists.txt @@ -438,16 +438,18 @@ elseif (${RF_BOARD} STREQUAL "OAI_BLADERF") #set(LOWLATENCY False) elseif (${RF_BOARD} STREQUAL "OAI_SODERA") - include_directories("${OPENAIR_TARGETS}/ARCH/SODERA/USERSPACE/LIB/") - include_directories("${OPENAIR_TARGETS}/ARCH/SODERA/USERSPACE/LIB/SoDeRaV1_distro_01v/lms7suite_source_code/src/lms7002m") - include_directories("${OPENAIR_TARGETS}/ARCH/SODERA/USERSPACE/LIB/SoDeRaV1_distro_01v/lms7suite_source_code/src/Si5351C") + include_directories("${OPENAIR_TARGETS}/ARCH/SODERA/USERSPACE/LIB") + include_directories("${OPENAIR_TARGETS}/ARCH/SODERA/USERSPACE/LIB/lms7suite/src/lms7002m") + include_directories("${OPENAIR_TARGETS}/ARCH/SODERA/USERSPACE/LIB/lms7suite/src/Si5351C") set(HW_SOURCE ${HW_SOURCE} ${OPENAIR_TARGETS}/ARCH/SODERA/USERSPACE/LIB/sodera_lib.cpp ) - LINK_DIRECTORIES("${OPENAIR_TARGETS}/ARCH/SODERA/USERSPACE/LIB/SoDeRaV1_distro_01v/lms7suite_source_code/build/lms7002m") + LINK_DIRECTORIES("${OPENAIR_TARGETS}/ARCH/SODERA/USERSPACE/LIB/lms7suite/src/lms7002m") + LINK_DIRECTORIES("${OPENAIR_TARGETS}/ARCH/SODERA/USERSPACE/LIB/lms7suite/src/Si5351C") LINK_DIRECTORIES("/usr/lib/x86_64-linux-gnu") set(option_HW_lib "usb-1.0") set(LMS7002_LIB "libLMS7002M.a") + set(Si5351C_LIB "libSi5351C.a") #set(LOWLATENCY False) elseif (${RF_BOARD} STREQUAL "ETHERNET") @@ -1447,7 +1449,7 @@ add_executable(lte-softmodem target_link_libraries (lte-softmodem -Wl,--start-group - RRC_LIB S1AP_LIB S1AP_ENB GTPV1U SECU_CN SECU_OSA UTIL HASHTABLE SCTP_CLIENT UDP SCHED_LIB PHY LFDS L2 ${MSC_LIB} ${RAL_LIB} ${NAS_UE_LIB} ${ITTI_LIB} ${MIH_LIB} ${LMS7002_LIB} + RRC_LIB S1AP_LIB S1AP_ENB GTPV1U SECU_CN SECU_OSA UTIL HASHTABLE SCTP_CLIENT UDP SCHED_LIB PHY LFDS L2 ${MSC_LIB} ${RAL_LIB} ${NAS_UE_LIB} ${ITTI_LIB} ${MIH_LIB} ${LMS7002_LIB} ${Si5351C_LIB} -Wl,--end-group ) diff --git a/targets/ARCH/COMMON/common_lib.c b/targets/ARCH/COMMON/common_lib.c index 8ee25c5fda..278d8ed79f 100644 --- a/targets/ARCH/COMMON/common_lib.c +++ b/targets/ARCH/COMMON/common_lib.c @@ -59,11 +59,16 @@ int openair0_device_init(openair0_device *device, openair0_config_t *openair0_cf return(openair0_dev_init_usrp(device, openair0_cfg)); #elif OAI_BLADERF device->type=BLADERF_IF; - printf(" openair0_dev_init_bladerf ...\n"); + printf("openair0_dev_init_bladerf ...\n"); return(openair0_dev_init_bladerf(device, openair0_cfg)); #elif OAI_SODERA device->type=OAI_SODERA; - printf(" openair0_dev_init_sodera ...\n"); + printf("openair0_dev_init_sodera ...\n"); + if (openair0_cfg[0].configFilename==NULL) { + printf("Please provide a configuration file for SoDeRa\n"); + exit(-1); + } + return(openair0_dev_init_sodera(device, openair0_cfg)); #endif diff --git a/targets/ARCH/COMMON/common_lib.h b/targets/ARCH/COMMON/common_lib.h index 8eaf3f781a..3f814a9e55 100644 --- a/targets/ARCH/COMMON/common_lib.h +++ b/targets/ARCH/COMMON/common_lib.h @@ -133,7 +133,8 @@ typedef struct { char *my_ip; //! my port number for Ethernet interface (eNB/BBU, UE) int my_port; - + //! Configuration file for LMS7002M + char *configFilename; } openair0_config_t; typedef struct { diff --git a/targets/ARCH/SODERA/USERSPACE/LIB/sodera_lib.cpp b/targets/ARCH/SODERA/USERSPACE/LIB/sodera_lib.cpp index f8257fccf8..ddd608d0a1 100644 --- a/targets/ARCH/SODERA/USERSPACE/LIB/sodera_lib.cpp +++ b/targets/ARCH/SODERA/USERSPACE/LIB/sodera_lib.cpp @@ -31,8 +31,9 @@ * * Author: Raymond Knopp */ - - + +#include +#include #include #include #include @@ -49,6 +50,7 @@ #include "common_lib.h" #include "lmsComms.h" +#include "LMS7002M.h" #include "Si5351C.h" #ifdef __SSE4_1__ # include @@ -58,6 +60,8 @@ # include #endif +using namespace std; + int num_devices=0; /*These items configure the underlying asynch stream used by the the sync interface. */ @@ -84,8 +88,8 @@ typedef struct uhd::async_metadata_t async_md; */ - LMScomms mDataPort; - + LMScomms Port; + Si5351C Si; double sample_rate; // time offset between transmiter timestamp and receiver timestamp; double tdiff; @@ -103,6 +107,7 @@ typedef struct } sodera_state_t; +sodera_state_t sodera_state; static int trx_sodera_start(openair0_device *device) { @@ -308,62 +313,99 @@ int trx_sodera_reset_stats(openair0_device* device) { int openair0_dev_init_sodera(openair0_device* device, openair0_config_t *openair0_cfg) { - sodera_state_t *s = (sodera_state_t*)malloc(sizeof(sodera_state_t)); + sodera_state_t *s=&sodera_state; + size_t i; - memset(s, 0, sizeof(sodera_state_t)); // Initialize SODERA device - if (!s->mDataPort.Open(0)) { - printf("Cannot open SoDeRa\n"); - exit(-1); - } + s->Port.RefreshDeviceList(); + vector deviceNames=s->Port.GetDeviceList(); - - int vers=0,subvers=0,subsubvers=0; - int bw_gain_adjust=0; + if (deviceNames.size() == 1) { + if (s->Port.Open(0) != IConnection::SUCCESS) { + printf("Cannot open SoDeRa\n"); + exit(-1); + } + LMSinfo devInfo = s->Port.GetInfo(); + printf("Device %s, HW: %d, FW: %d, Protocol %d\n", + GetDeviceName(devInfo.device), + (int)devInfo.hardware, + (int)devInfo.firmware, + (int)devInfo.protocol); + LMS7002M lmsControl(&s->Port); + + printf("Configuring Si5351C\n"); + s->Si.Initialize(&s->Port); + s->Si.SetPLL(0, 25000000, 0); + s->Si.SetPLL(1, 25000000, 0); + s->Si.SetClock(0, 27000000, true, false); + s->Si.SetClock(1, 27000000, true, false); + for (int i = 2; i < 8; ++i) + s->Si.SetClock(i, 27000000, false, false); + Si5351C::Status status = s->Si.ConfigureClocks(); + if (status != Si5351C::SUCCESS) + { + printf("Failed to configure Si5351C"); + exit(-1); + } + status = s->Si.UploadConfiguration(); + if (status != Si5351C::SUCCESS) + printf("Failed to upload Si5351C configuration"); + + + printf("Configuring LMS7002\n"); + + int bw_gain_adjust=0; - openair0_cfg[0].rx_gain_calib_table = calib_table_sodera; + openair0_cfg[0].rx_gain_calib_table = calib_table_sodera; - switch ((int)openair0_cfg[0].sample_rate) { - case 30720000: - // from usrp_time_offset - openair0_cfg[0].samples_per_packet = 2048; - openair0_cfg[0].tx_sample_advance = 15; - openair0_cfg[0].tx_bw = 20e6; - openair0_cfg[0].rx_bw = 20e6; - openair0_cfg[0].tx_scheduling_advance = 8*openair0_cfg[0].samples_per_packet; - break; - case 15360000: - openair0_cfg[0].samples_per_packet = 2048; - openair0_cfg[0].tx_sample_advance = 45; - openair0_cfg[0].tx_bw = 10e6; - openair0_cfg[0].rx_bw = 10e6; - openair0_cfg[0].tx_scheduling_advance = 5*openair0_cfg[0].samples_per_packet; - break; - case 7680000: - openair0_cfg[0].samples_per_packet = 1024; - openair0_cfg[0].tx_sample_advance = 50; - openair0_cfg[0].tx_bw = 5e6; - openair0_cfg[0].rx_bw = 5e6; - openair0_cfg[0].tx_scheduling_advance = 5*openair0_cfg[0].samples_per_packet; - break; - case 1920000: - openair0_cfg[0].samples_per_packet = 256; - openair0_cfg[0].tx_sample_advance = 50; - openair0_cfg[0].tx_bw = 1.25e6; - openair0_cfg[0].rx_bw = 1.25e6; - openair0_cfg[0].tx_scheduling_advance = 8*openair0_cfg[0].samples_per_packet; - break; - default: - printf("Error: unknown sampling rate %f\n",openair0_cfg[0].sample_rate); - exit(-1); - break; - } - - /* - for(i=0;iusrp->get_rx_num_channels();i++) { - if (iusrp->set_rx_rate(openair0_cfg[0].sample_rate,i); s->usrp->set_rx_bandwidth(openair0_cfg[0].rx_bw,i); printf("Setting rx freq/gain on channel %lu/%lu : BW %f (readback %f)\n",i,s->usrp->get_rx_num_channels(),openair0_cfg[0].rx_bw/1e6,s->usrp->get_rx_bandwidth(i)/1e6); @@ -420,9 +462,12 @@ int openair0_dev_init_sodera(openair0_device* device, openair0_config_t *openair std::cout << boost::format("Actual TX bandwidth: %fM...") % (s->usrp->get_tx_bandwidth(i)/1e6) << std::endl; std::cout << boost::format("Actual TX antenna: %s...") % (s->usrp->get_tx_antenna(i)) << std::endl; } - } */ - + } + else { + printf("Please connect SoDeRa\n"); + exit(-1); + } device->priv = s; device->trx_start_func = trx_sodera_start; diff --git a/targets/ARCH/SODERA/lms7_trx_LTE_mimo_RF.ini b/targets/ARCH/SODERA/lms7_trx_LTE_mimo_RF.ini new file mode 100644 index 0000000000..e0e313b23e --- /dev/null +++ b/targets/ARCH/SODERA/lms7_trx_LTE_mimo_RF.ini @@ -0,0 +1,1128 @@ +[file_info] +type=lms7002m_minimal_config +version=1 +[lms7002_registers_a] +0x0020=0xFFFD +0x0021=0x0E9F +0x0022=0x07FF +0x0023=0x5550 +0x0024=0xE4E4 +0x0025=0x0101 +0x0026=0x0101 +0x0027=0xB1E4 +0x0028=0x0101 +0x0029=0x0101 +0x002A=0x0086 +0x002B=0x0038 +0x002C=0x0000 +0x002D=0xFFFF +0x002E=0x0000 +0x002F=0x3840 +0x0081=0x0000 +0x0082=0x8001 +0x0084=0x0400 +0x0085=0x0001 +0x0086=0x4101 +0x0087=0xB13B +0x0088=0x0303 +0x0089=0x1078 +0x008A=0x0514 +0x008B=0x2182 +0x008C=0x267B +0x0092=0x0001 +0x0093=0x0000 +0x0094=0x0000 +0x0095=0x0000 +0x0096=0x0000 +0x0097=0x0000 +0x0098=0x0000 +0x0099=0x6565 +0x009A=0x658C +0x009B=0x6565 +0x009C=0x658C +0x009D=0x6565 +0x009E=0x658C +0x009F=0x658C +0x00A0=0x6565 +0x00A1=0x6565 +0x00A2=0x6565 +0x00A3=0x6565 +0x00A4=0x6565 +0x00A5=0x6565 +0x00A6=0x0001 +0x00A7=0x6565 +0x00A8=0x0000 +0x00A9=0x8000 +0x00AA=0x0000 +0x00AB=0x0040 +0x00AC=0x2000 +0x00AD=0x03FF +0x00AE=0x0000 +0x0100=0x7409 +0x0101=0x7800 +0x0102=0x3180 +0x0103=0x0A12 +0x0104=0x0088 +0x0105=0x0007 +0x0106=0x3182 +0x0107=0x318C +0x0108=0x3042 +0x0109=0x61C1 +0x010A=0x104C +0x010C=0x8865 +0x010D=0x019D +0x010E=0x2040 +0x010F=0x3042 +0x0110=0x0BF4 +0x0111=0x0083 +0x0112=0xC0E6 +0x0113=0x03C3 +0x0114=0x008D +0x0115=0x0009 +0x0116=0x8180 +0x0117=0x280C +0x0118=0x018C +0x0119=0x18CB +0x011A=0x2E02 +0x011C=0xA941 +0x011D=0x4EC4 +0x011E=0x048C +0x011F=0x3640 +0x0120=0xB9FF +0x0121=0x3158 +0x0122=0x033F +0x0123=0x267B +0x0124=0x0000 +0x0200=0x0081 +0x0201=0x07B0 +0x0202=0x06F2 +0x0203=0x0FC2 +0x0204=0xD51F +0x0205=0x0000 +0x0206=0x0000 +0x0207=0x0000 +0x0208=0x0170 +0x0209=0x0000 +0x020A=0x0080 +0x020B=0x4000 +0x020C=0x7FFF +0x0240=0x0020 +0x0241=0x0000 +0x0242=0x0000 +0x0243=0x0000 +0x0244=0x0000 +0x0245=0x0000 +0x0246=0x0000 +0x0247=0x0000 +0x0248=0x0000 +0x0249=0x0000 +0x024A=0x0000 +0x024B=0x0000 +0x024C=0x0000 +0x024D=0x0000 +0x024E=0x0000 +0x024F=0x0000 +0x0250=0x0000 +0x0251=0x0000 +0x0252=0x0000 +0x0253=0x0000 +0x0254=0x0000 +0x0255=0x0000 +0x0256=0x0000 +0x0257=0x0000 +0x0258=0x0000 +0x0259=0x0000 +0x025A=0x0000 +0x025B=0x0000 +0x025C=0x0000 +0x025D=0x0000 +0x025E=0x0000 +0x025F=0x0000 +0x0260=0x0000 +0x0261=0x0000 +0x0280=0x0000 +0x0281=0x0000 +0x0282=0x0000 +0x0283=0x0000 +0x0284=0x0000 +0x0285=0x0000 +0x0286=0x0000 +0x0287=0x0000 +0x0288=0x0000 +0x0289=0x0000 +0x028A=0x0000 +0x028B=0x0000 +0x028C=0x0000 +0x028D=0x0000 +0x028E=0x0000 +0x028F=0x0000 +0x0290=0x0000 +0x0291=0x0000 +0x0292=0x0000 +0x0293=0x0000 +0x0294=0x0000 +0x0295=0x0000 +0x0296=0x0000 +0x0297=0x0000 +0x0298=0x0000 +0x0299=0x0000 +0x029A=0x0000 +0x029B=0x0000 +0x029C=0x0000 +0x029D=0x0000 +0x029E=0x0000 +0x029F=0x0000 +0x02A0=0x0000 +0x02A1=0x0000 +0x02A2=0x0000 +0x02A3=0x0000 +0x02A4=0x0000 +0x02A5=0x0000 +0x02A6=0x0000 +0x02A7=0x0000 +0x02C0=0x0000 +0x02C1=0x0000 +0x02C2=0x0000 +0x02C3=0x0000 +0x02C4=0x0000 +0x02C5=0x0000 +0x02C6=0x0000 +0x02C7=0x0000 +0x02C8=0x0000 +0x02C9=0x0000 +0x02CA=0x0000 +0x02CB=0x0000 +0x02CC=0x0000 +0x02CD=0x0000 +0x02CE=0x0000 +0x02CF=0x0000 +0x02D0=0x0000 +0x02D1=0x0000 +0x02D2=0x0000 +0x02D3=0x0000 +0x02D4=0x0000 +0x02D5=0x0000 +0x02D6=0x0000 +0x02D7=0x0000 +0x02D8=0x0000 +0x02D9=0x0000 +0x02DA=0x0000 +0x02DB=0x0000 +0x02DC=0x0000 +0x02DD=0x0000 +0x02DE=0x0000 +0x02DF=0x0000 +0x02E0=0x0000 +0x02E1=0x0000 +0x02E2=0x0000 +0x02E3=0x0000 +0x02E4=0x0000 +0x02E5=0x0000 +0x02E6=0x0000 +0x02E7=0x0000 +0x0300=0x0000 +0x0301=0x0000 +0x0302=0x0000 +0x0303=0x0000 +0x0304=0x0000 +0x0305=0x0000 +0x0306=0x0000 +0x0307=0x0000 +0x0308=0x0000 +0x0309=0x0000 +0x030A=0x0000 +0x030B=0x0000 +0x030C=0x0000 +0x030D=0x0000 +0x030E=0x0000 +0x030F=0x0000 +0x0310=0x0000 +0x0311=0x0000 +0x0312=0x0000 +0x0313=0x0000 +0x0314=0x0000 +0x0315=0x0000 +0x0316=0x0000 +0x0317=0x0000 +0x0318=0x0000 +0x0319=0x0000 +0x031A=0x0000 +0x031B=0x0000 +0x031C=0x0000 +0x031D=0x0000 +0x031E=0x0000 +0x031F=0x0000 +0x0320=0x0000 +0x0321=0x0000 +0x0322=0x0000 +0x0323=0x0000 +0x0324=0x0000 +0x0325=0x0000 +0x0326=0x0000 +0x0327=0x0000 +0x0340=0x0000 +0x0341=0x0000 +0x0342=0x0000 +0x0343=0x0000 +0x0344=0x0000 +0x0345=0x0000 +0x0346=0x0000 +0x0347=0x0000 +0x0348=0x0000 +0x0349=0x0000 +0x034A=0x0000 +0x034B=0x0000 +0x034C=0x0000 +0x034D=0x0000 +0x034E=0x0000 +0x034F=0x0000 +0x0350=0x0000 +0x0351=0x0000 +0x0352=0x0000 +0x0353=0x0000 +0x0354=0x0000 +0x0355=0x0000 +0x0356=0x0000 +0x0357=0x0000 +0x0358=0x0000 +0x0359=0x0000 +0x035A=0x0000 +0x035B=0x0000 +0x035C=0x0000 +0x035D=0x0000 +0x035E=0x0000 +0x035F=0x0000 +0x0360=0x0000 +0x0361=0x0000 +0x0362=0x0000 +0x0363=0x0000 +0x0364=0x0000 +0x0365=0x0000 +0x0366=0x0000 +0x0367=0x0000 +0x0380=0x0000 +0x0381=0x0000 +0x0382=0x0000 +0x0383=0x0000 +0x0384=0x0000 +0x0385=0x0000 +0x0386=0x0000 +0x0387=0x0000 +0x0388=0x0000 +0x0389=0x0000 +0x038A=0x0000 +0x038B=0x0000 +0x038C=0x0000 +0x038D=0x0000 +0x038E=0x0000 +0x038F=0x0000 +0x0390=0x0000 +0x0391=0x0000 +0x0392=0x0000 +0x0393=0x0000 +0x0394=0x0000 +0x0395=0x0000 +0x0396=0x0000 +0x0397=0x0000 +0x0398=0x0000 +0x0399=0x0000 +0x039A=0x0000 +0x039B=0x0000 +0x039C=0x0000 +0x039D=0x0000 +0x039E=0x0000 +0x039F=0x0000 +0x03A0=0x0000 +0x03A1=0x0000 +0x03A2=0x0000 +0x03A3=0x0000 +0x03A4=0x0000 +0x03A5=0x0000 +0x03A6=0x0000 +0x03A7=0x0000 +0x0400=0x0081 +0x0401=0x07FF +0x0402=0x07FF +0x0403=0x0000 +0x0404=0x0000 +0x0405=0x0000 +0x0406=0x0000 +0x0407=0x0000 +0x0408=0x0000 +0x0409=0x0000 +0x040A=0x0003 +0x040B=0x000F +0x040C=0x00FC +0x040D=0x0000 +0x040E=0x0000 +0x040F=0x0000 +0x0440=0x0020 +0x0441=0x0000 +0x0442=0x0563 +0x0443=0xB490 +0x0444=0x02B1 +0x0445=0xDA48 +0x0446=0x0000 +0x0447=0x0000 +0x0448=0x0000 +0x0449=0x0000 +0x044A=0x0000 +0x044B=0x0000 +0x044C=0x0000 +0x044D=0x0000 +0x044E=0x0000 +0x044F=0x0000 +0x0450=0x0000 +0x0451=0x0000 +0x0452=0x0000 +0x0453=0x0000 +0x0454=0x0000 +0x0455=0x0000 +0x0456=0x0000 +0x0457=0x0000 +0x0458=0x0000 +0x0459=0x0000 +0x045A=0x0000 +0x045B=0x0000 +0x045C=0x0000 +0x045D=0x0000 +0x045E=0x0000 +0x045F=0x0000 +0x0460=0x0000 +0x0461=0x0000 +0x0480=0x0000 +0x0481=0x0000 +0x0482=0x0000 +0x0483=0x0000 +0x0484=0x0000 +0x0485=0x0000 +0x0486=0x0000 +0x0487=0x0000 +0x0488=0x0000 +0x0489=0x0000 +0x048A=0x0000 +0x048B=0x0000 +0x048C=0x0000 +0x048D=0x0000 +0x048E=0x0000 +0x048F=0x0000 +0x0490=0x0000 +0x0491=0x0000 +0x0492=0x0000 +0x0493=0x0000 +0x0494=0x0000 +0x0495=0x0000 +0x0496=0x0000 +0x0497=0x0000 +0x0498=0x0000 +0x0499=0x0000 +0x049A=0x0000 +0x049B=0x0000 +0x049C=0x0000 +0x049D=0x0000 +0x049E=0x0000 +0x049F=0x0000 +0x04A0=0x0000 +0x04A1=0x0000 +0x04A2=0x0000 +0x04A3=0x0000 +0x04A4=0x0000 +0x04A5=0x0000 +0x04A6=0x0000 +0x04A7=0x0000 +0x04C0=0x0000 +0x04C1=0x0000 +0x04C2=0x0000 +0x04C3=0x0000 +0x04C4=0x0000 +0x04C5=0x0000 +0x04C6=0x0000 +0x04C7=0x0000 +0x04C8=0x0000 +0x04C9=0x0000 +0x04CA=0x0000 +0x04CB=0x0000 +0x04CC=0x0000 +0x04CD=0x0000 +0x04CE=0x0000 +0x04CF=0x0000 +0x04D0=0x0000 +0x04D1=0x0000 +0x04D2=0x0000 +0x04D3=0x0000 +0x04D4=0x0000 +0x04D5=0x0000 +0x04D6=0x0000 +0x04D7=0x0000 +0x04D8=0x0000 +0x04D9=0x0000 +0x04DA=0x0000 +0x04DB=0x0000 +0x04DC=0x0000 +0x04DD=0x0000 +0x04DE=0x0000 +0x04DF=0x0000 +0x04E0=0x0000 +0x04E1=0x0000 +0x04E2=0x0000 +0x04E3=0x0000 +0x04E4=0x0000 +0x04E5=0x0000 +0x04E6=0x0000 +0x04E7=0x0000 +0x0500=0x0000 +0x0501=0x0000 +0x0502=0x0000 +0x0503=0x0000 +0x0504=0x0000 +0x0505=0x0000 +0x0506=0x0000 +0x0507=0x0000 +0x0508=0x0000 +0x0509=0x0000 +0x050A=0x0000 +0x050B=0x0000 +0x050C=0x0000 +0x050D=0x0000 +0x050E=0x0000 +0x050F=0x0000 +0x0510=0x0000 +0x0511=0x0000 +0x0512=0x0000 +0x0513=0x0000 +0x0514=0x0000 +0x0515=0x0000 +0x0516=0x0000 +0x0517=0x0000 +0x0518=0x0000 +0x0519=0x0000 +0x051A=0x0000 +0x051B=0x0000 +0x051C=0x0000 +0x051D=0x0000 +0x051E=0x0000 +0x051F=0x0000 +0x0520=0x0000 +0x0521=0x0000 +0x0522=0x0000 +0x0523=0x0000 +0x0524=0x0000 +0x0525=0x0000 +0x0526=0x0000 +0x0527=0x0000 +0x0540=0x0000 +0x0541=0x0000 +0x0542=0x0000 +0x0543=0x0000 +0x0544=0x0000 +0x0545=0x0000 +0x0546=0x0000 +0x0547=0x0000 +0x0548=0x0000 +0x0549=0x0000 +0x054A=0x0000 +0x054B=0x0000 +0x054C=0x0000 +0x054D=0x0000 +0x054E=0x0000 +0x054F=0x0000 +0x0550=0x0000 +0x0551=0x0000 +0x0552=0x0000 +0x0553=0x0000 +0x0554=0x0000 +0x0555=0x0000 +0x0556=0x0000 +0x0557=0x0000 +0x0558=0x0000 +0x0559=0x0000 +0x055A=0x0000 +0x055B=0x0000 +0x055C=0x0000 +0x055D=0x0000 +0x055E=0x0000 +0x055F=0x0000 +0x0560=0x0000 +0x0561=0x0000 +0x0562=0x0000 +0x0563=0x0000 +0x0564=0x0000 +0x0565=0x0000 +0x0566=0x0000 +0x0567=0x0000 +0x0580=0x0000 +0x0581=0x0000 +0x0582=0x0000 +0x0583=0x0000 +0x0584=0x0000 +0x0585=0x0000 +0x0586=0x0000 +0x0587=0x0000 +0x0588=0x0000 +0x0589=0x0000 +0x058A=0x0000 +0x058B=0x0000 +0x058C=0x0000 +0x058D=0x0000 +0x058E=0x0000 +0x058F=0x0000 +0x0590=0x0000 +0x0591=0x0000 +0x0592=0x0000 +0x0593=0x0000 +0x0594=0x0000 +0x0595=0x0000 +0x0596=0x0000 +0x0597=0x0000 +0x0598=0x0000 +0x0599=0x0000 +0x059A=0x0000 +0x059B=0x0000 +0x059C=0x0000 +0x059D=0x0000 +0x059E=0x0000 +0x059F=0x0000 +0x05A0=0x0000 +0x05A1=0x0000 +0x05A2=0x0000 +0x05A3=0x0000 +0x05A4=0x0000 +0x05A5=0x0000 +0x05A6=0x0000 +0x05A7=0x0000 +[lms7002_registers_b] +0x0100=0x3409 +0x0101=0x7800 +0x0102=0x3180 +0x0103=0x0A12 +0x0104=0x0088 +0x0105=0x0007 +0x0106=0x3182 +0x0107=0x318C +0x0108=0x3042 +0x0109=0x61C1 +0x010A=0x104C +0x010C=0x8865 +0x010D=0x019C +0x010E=0x2040 +0x010F=0x3042 +0x0110=0x0BF4 +0x0111=0x0083 +0x0112=0xC0E6 +0x0113=0x03C3 +0x0114=0x008D +0x0115=0x0009 +0x0116=0x8180 +0x0117=0x280C +0x0118=0x018C +0x0119=0x18CB +0x011A=0x2E02 +0x011C=0xA941 +0x011D=0x3B13 +0x011E=0x0631 +0x011F=0x3600 +0x0120=0xB9FF +0x0121=0x31DA +0x0122=0x033F +0x0123=0x267B +0x0124=0x0000 +0x0200=0x0101 +0x0201=0x05BD +0x0202=0x0779 +0x0203=0x0F9E +0x0204=0xBCC2 +0x0205=0x0000 +0x0206=0x0000 +0x0207=0x0000 +0x0208=0x0170 +0x0209=0x0000 +0x020A=0x0080 +0x020B=0x4000 +0x020C=0x7FFF +0x0240=0x0020 +0x0241=0x0000 +0x0242=0x0000 +0x0243=0x0000 +0x0244=0x0000 +0x0245=0x0000 +0x0246=0x0000 +0x0247=0x0000 +0x0248=0x0000 +0x0249=0x0000 +0x024A=0x0000 +0x024B=0x0000 +0x024C=0x0000 +0x024D=0x0000 +0x024E=0x0000 +0x024F=0x0000 +0x0250=0x0000 +0x0251=0x0000 +0x0252=0x0000 +0x0253=0x0000 +0x0254=0x0000 +0x0255=0x0000 +0x0256=0x0000 +0x0257=0x0000 +0x0258=0x0000 +0x0259=0x0000 +0x025A=0x0000 +0x025B=0x0000 +0x025C=0x0000 +0x025D=0x0000 +0x025E=0x0000 +0x025F=0x0000 +0x0260=0x0000 +0x0261=0x0000 +0x0280=0x0000 +0x0281=0x0000 +0x0282=0x0000 +0x0283=0x0000 +0x0284=0x0000 +0x0285=0x0000 +0x0286=0x0000 +0x0287=0x0000 +0x0288=0x0000 +0x0289=0x0000 +0x028A=0x0000 +0x028B=0x0000 +0x028C=0x0000 +0x028D=0x0000 +0x028E=0x0000 +0x028F=0x0000 +0x0290=0x0000 +0x0291=0x0000 +0x0292=0x0000 +0x0293=0x0000 +0x0294=0x0000 +0x0295=0x0000 +0x0296=0x0000 +0x0297=0x0000 +0x0298=0x0000 +0x0299=0x0000 +0x029A=0x0000 +0x029B=0x0000 +0x029C=0x0000 +0x029D=0x0000 +0x029E=0x0000 +0x029F=0x0000 +0x02A0=0x0000 +0x02A1=0x0000 +0x02A2=0x0000 +0x02A3=0x0000 +0x02A4=0x0000 +0x02A5=0x0000 +0x02A6=0x0000 +0x02A7=0x0000 +0x02C0=0x0000 +0x02C1=0x0000 +0x02C2=0x0000 +0x02C3=0x0000 +0x02C4=0x0000 +0x02C5=0x0000 +0x02C6=0x0000 +0x02C7=0x0000 +0x02C8=0x0000 +0x02C9=0x0000 +0x02CA=0x0000 +0x02CB=0x0000 +0x02CC=0x0000 +0x02CD=0x0000 +0x02CE=0x0000 +0x02CF=0x0000 +0x02D0=0x0000 +0x02D1=0x0000 +0x02D2=0x0000 +0x02D3=0x0000 +0x02D4=0x0000 +0x02D5=0x0000 +0x02D6=0x0000 +0x02D7=0x0000 +0x02D8=0x0000 +0x02D9=0x0000 +0x02DA=0x0000 +0x02DB=0x0000 +0x02DC=0x0000 +0x02DD=0x0000 +0x02DE=0x0000 +0x02DF=0x0000 +0x02E0=0x0000 +0x02E1=0x0000 +0x02E2=0x0000 +0x02E3=0x0000 +0x02E4=0x0000 +0x02E5=0x0000 +0x02E6=0x0000 +0x02E7=0x0000 +0x0300=0x0000 +0x0301=0x0000 +0x0302=0x0000 +0x0303=0x0000 +0x0304=0x0000 +0x0305=0x0000 +0x0306=0x0000 +0x0307=0x0000 +0x0308=0x0000 +0x0309=0x0000 +0x030A=0x0000 +0x030B=0x0000 +0x030C=0x0000 +0x030D=0x0000 +0x030E=0x0000 +0x030F=0x0000 +0x0310=0x0000 +0x0311=0x0000 +0x0312=0x0000 +0x0313=0x0000 +0x0314=0x0000 +0x0315=0x0000 +0x0316=0x0000 +0x0317=0x0000 +0x0318=0x0000 +0x0319=0x0000 +0x031A=0x0000 +0x031B=0x0000 +0x031C=0x0000 +0x031D=0x0000 +0x031E=0x0000 +0x031F=0x0000 +0x0320=0x0000 +0x0321=0x0000 +0x0322=0x0000 +0x0323=0x0000 +0x0324=0x0000 +0x0325=0x0000 +0x0326=0x0000 +0x0327=0x0000 +0x0340=0x0000 +0x0341=0x0000 +0x0342=0x0000 +0x0343=0x0000 +0x0344=0x0000 +0x0345=0x0000 +0x0346=0x0000 +0x0347=0x0000 +0x0348=0x0000 +0x0349=0x0000 +0x034A=0x0000 +0x034B=0x0000 +0x034C=0x0000 +0x034D=0x0000 +0x034E=0x0000 +0x034F=0x0000 +0x0350=0x0000 +0x0351=0x0000 +0x0352=0x0000 +0x0353=0x0000 +0x0354=0x0000 +0x0355=0x0000 +0x0356=0x0000 +0x0357=0x0000 +0x0358=0x0000 +0x0359=0x0000 +0x035A=0x0000 +0x035B=0x0000 +0x035C=0x0000 +0x035D=0x0000 +0x035E=0x0000 +0x035F=0x0000 +0x0360=0x0000 +0x0361=0x0000 +0x0362=0x0000 +0x0363=0x0000 +0x0364=0x0000 +0x0365=0x0000 +0x0366=0x0000 +0x0367=0x0000 +0x0380=0x0000 +0x0381=0x0000 +0x0382=0x0000 +0x0383=0x0000 +0x0384=0x0000 +0x0385=0x0000 +0x0386=0x0000 +0x0387=0x0000 +0x0388=0x0000 +0x0389=0x0000 +0x038A=0x0000 +0x038B=0x0000 +0x038C=0x0000 +0x038D=0x0000 +0x038E=0x0000 +0x038F=0x0000 +0x0390=0x0000 +0x0391=0x0000 +0x0392=0x0000 +0x0393=0x0000 +0x0394=0x0000 +0x0395=0x0000 +0x0396=0x0000 +0x0397=0x0000 +0x0398=0x0000 +0x0399=0x0000 +0x039A=0x0000 +0x039B=0x0000 +0x039C=0x0000 +0x039D=0x0000 +0x039E=0x0000 +0x039F=0x0000 +0x03A0=0x0000 +0x03A1=0x0000 +0x03A2=0x0000 +0x03A3=0x0000 +0x03A4=0x0000 +0x03A5=0x0000 +0x03A6=0x0000 +0x03A7=0x0000 +0x0400=0x0101 +0x0401=0x07FF +0x0402=0x079B +0x0403=0x0FF5 +0x0404=0x0000 +0x0405=0x0000 +0x0406=0x0000 +0x0407=0x0000 +0x0408=0x0000 +0x0409=0x0000 +0x040A=0x0000 +0x040B=0x7FFF +0x040C=0x00FC +0x040D=0x0000 +0x040E=0x0000 +0x040F=0x0000 +0x0440=0x0020 +0x0441=0x0000 +0x0442=0x0000 +0x0443=0x0000 +0x0444=0x0000 +0x0445=0x0000 +0x0446=0x0000 +0x0447=0x0000 +0x0448=0x0000 +0x0449=0x0000 +0x044A=0x0000 +0x044B=0x0000 +0x044C=0x0000 +0x044D=0x0000 +0x044E=0x0000 +0x044F=0x0000 +0x0450=0x0000 +0x0451=0x0000 +0x0452=0x0000 +0x0453=0x0000 +0x0454=0x0000 +0x0455=0x0000 +0x0456=0x0000 +0x0457=0x0000 +0x0458=0x0000 +0x0459=0x0000 +0x045A=0x0000 +0x045B=0x0000 +0x045C=0x0000 +0x045D=0x0000 +0x045E=0x0000 +0x045F=0x0000 +0x0460=0x0000 +0x0461=0x0000 +0x0480=0x0000 +0x0481=0x0000 +0x0482=0x0000 +0x0483=0x0000 +0x0484=0x0000 +0x0485=0x0000 +0x0486=0x0000 +0x0487=0x0000 +0x0488=0x0000 +0x0489=0x0000 +0x048A=0x0000 +0x048B=0x0000 +0x048C=0x0000 +0x048D=0x0000 +0x048E=0x0000 +0x048F=0x0000 +0x0490=0x0000 +0x0491=0x0000 +0x0492=0x0000 +0x0493=0x0000 +0x0494=0x0000 +0x0495=0x0000 +0x0496=0x0000 +0x0497=0x0000 +0x0498=0x0000 +0x0499=0x0000 +0x049A=0x0000 +0x049B=0x0000 +0x049C=0x0000 +0x049D=0x0000 +0x049E=0x0000 +0x049F=0x0000 +0x04A0=0x0000 +0x04A1=0x0000 +0x04A2=0x0000 +0x04A3=0x0000 +0x04A4=0x0000 +0x04A5=0x0000 +0x04A6=0x0000 +0x04A7=0x0000 +0x04C0=0x0000 +0x04C1=0x0000 +0x04C2=0x0000 +0x04C3=0x0000 +0x04C4=0x0000 +0x04C5=0x0000 +0x04C6=0x0000 +0x04C7=0x0000 +0x04C8=0x0000 +0x04C9=0x0000 +0x04CA=0x0000 +0x04CB=0x0000 +0x04CC=0x0000 +0x04CD=0x0000 +0x04CE=0x0000 +0x04CF=0x0000 +0x04D0=0x0000 +0x04D1=0x0000 +0x04D2=0x0000 +0x04D3=0x0000 +0x04D4=0x0000 +0x04D5=0x0000 +0x04D6=0x0000 +0x04D7=0x0000 +0x04D8=0x0000 +0x04D9=0x0000 +0x04DA=0x0000 +0x04DB=0x0000 +0x04DC=0x0000 +0x04DD=0x0000 +0x04DE=0x0000 +0x04DF=0x0000 +0x04E0=0x0000 +0x04E1=0x0000 +0x04E2=0x0000 +0x04E3=0x0000 +0x04E4=0x0000 +0x04E5=0x0000 +0x04E6=0x0000 +0x04E7=0x0000 +0x0500=0x0000 +0x0501=0x0000 +0x0502=0x0000 +0x0503=0x0000 +0x0504=0x0000 +0x0505=0x0000 +0x0506=0x0000 +0x0507=0x0000 +0x0508=0x0000 +0x0509=0x0000 +0x050A=0x0000 +0x050B=0x0000 +0x050C=0x0000 +0x050D=0x0000 +0x050E=0x0000 +0x050F=0x0000 +0x0510=0x0000 +0x0511=0x0000 +0x0512=0x0000 +0x0513=0x0000 +0x0514=0x0000 +0x0515=0x0000 +0x0516=0x0000 +0x0517=0x0000 +0x0518=0x0000 +0x0519=0x0000 +0x051A=0x0000 +0x051B=0x0000 +0x051C=0x0000 +0x051D=0x0000 +0x051E=0x0000 +0x051F=0x0000 +0x0520=0x0000 +0x0521=0x0000 +0x0522=0x0000 +0x0523=0x0000 +0x0524=0x0000 +0x0525=0x0000 +0x0526=0x0000 +0x0527=0x0000 +0x0540=0x0000 +0x0541=0x0000 +0x0542=0x0000 +0x0543=0x0000 +0x0544=0x0000 +0x0545=0x0000 +0x0546=0x0000 +0x0547=0x0000 +0x0548=0x0000 +0x0549=0x0000 +0x054A=0x0000 +0x054B=0x0000 +0x054C=0x0000 +0x054D=0x0000 +0x054E=0x0000 +0x054F=0x0000 +0x0550=0x0000 +0x0551=0x0000 +0x0552=0x0000 +0x0553=0x0000 +0x0554=0x0000 +0x0555=0x0000 +0x0556=0x0000 +0x0557=0x0000 +0x0558=0x0000 +0x0559=0x0000 +0x055A=0x0000 +0x055B=0x0000 +0x055C=0x0000 +0x055D=0x0000 +0x055E=0x0000 +0x055F=0x0000 +0x0560=0x0000 +0x0561=0x0000 +0x0562=0x0000 +0x0563=0x0000 +0x0564=0x0000 +0x0565=0x0000 +0x0566=0x0000 +0x0567=0x0000 +0x0580=0x0000 +0x0581=0x0000 +0x0582=0x0000 +0x0583=0x0000 +0x0584=0x0000 +0x0585=0x0000 +0x0586=0x0000 +0x0587=0x0000 +0x0588=0x0000 +0x0589=0x0000 +0x058A=0x0000 +0x058B=0x0000 +0x058C=0x0000 +0x058D=0x0000 +0x058E=0x0000 +0x058F=0x0000 +0x0590=0x0000 +0x0591=0x0000 +0x0592=0x0000 +0x0593=0x0000 +0x0594=0x0000 +0x0595=0x0000 +0x0596=0x0000 +0x0597=0x0000 +0x0598=0x0000 +0x0599=0x0000 +0x059A=0x0000 +0x059B=0x0000 +0x059C=0x0000 +0x059D=0x0000 +0x059E=0x0000 +0x059F=0x0000 +0x05A0=0x0000 +0x05A1=0x0000 +0x05A2=0x0000 +0x05A3=0x0000 +0x05A4=0x0000 +0x05A5=0x0000 +0x05A6=0x0000 +0x05A7=0x0000 +[reference_clocks] +sxr_ref_clk_mhz=52 +sxt_ref_clk_mhz=52 diff --git a/targets/ARCH/SODERA/lms7_trx_LTE_mimo_TSG.ini b/targets/ARCH/SODERA/lms7_trx_LTE_mimo_TSG.ini new file mode 100644 index 0000000000..fb25b06527 --- /dev/null +++ b/targets/ARCH/SODERA/lms7_trx_LTE_mimo_TSG.ini @@ -0,0 +1,1128 @@ +[file_info] +type=lms7002m_minimal_config +version=1 +[lms7002_registers_a] +0x0020=0xFFFD +0x0021=0x0E9F +0x0022=0x07FF +0x0023=0x5550 +0x0024=0xE4E4 +0x0025=0x0101 +0x0026=0x0101 +0x0027=0xE4E4 +0x0028=0x0101 +0x0029=0x0101 +0x002A=0x0086 +0x002B=0x0038 +0x002C=0x0000 +0x002D=0xFFFF +0x002E=0x0000 +0x002F=0x3840 +0x0081=0x0000 +0x0082=0x8001 +0x0084=0x0400 +0x0085=0x0001 +0x0086=0x4101 +0x0087=0xB13B +0x0088=0x0303 +0x0089=0x1078 +0x008A=0x0514 +0x008B=0x2184 +0x008C=0x267B +0x0092=0x0001 +0x0093=0x0000 +0x0094=0x0000 +0x0095=0x0000 +0x0096=0x0000 +0x0097=0x0000 +0x0098=0x0000 +0x0099=0x6565 +0x009A=0x658C +0x009B=0x6565 +0x009C=0x658C +0x009D=0x6565 +0x009E=0x658C +0x009F=0x658C +0x00A0=0x6565 +0x00A1=0x6565 +0x00A2=0x6565 +0x00A3=0x6565 +0x00A4=0x6565 +0x00A5=0x6565 +0x00A6=0x0001 +0x00A7=0x6565 +0x00A8=0x0000 +0x00A9=0x8000 +0x00AA=0x0000 +0x00AB=0x0040 +0x00AC=0x2000 +0x00AD=0x03FF +0x00AE=0x0000 +0x0100=0x7409 +0x0101=0x7800 +0x0102=0x3180 +0x0103=0x0A12 +0x0104=0x0088 +0x0105=0x0007 +0x0106=0x3182 +0x0107=0x318C +0x0108=0x9442 +0x0109=0x61C1 +0x010A=0x104C +0x010C=0x8865 +0x010D=0x011A +0x010E=0x2040 +0x010F=0x3042 +0x0110=0x0BF4 +0x0111=0x0083 +0x0112=0xC0E6 +0x0113=0x03C3 +0x0114=0x008D +0x0115=0x0009 +0x0116=0x8180 +0x0117=0x280C +0x0118=0x018C +0x0119=0x18CB +0x011A=0x2E02 +0x011C=0xAD41 +0x011D=0x9D89 +0x011E=0x0398 +0x011F=0x3680 +0x0120=0xB9FF +0x0121=0x3692 +0x0122=0x033F +0x0123=0x267B +0x0124=0x0000 +0x0200=0x0081 +0x0201=0x07B0 +0x0202=0x06F2 +0x0203=0x0FC2 +0x0204=0xD51F +0x0205=0x0000 +0x0206=0x0000 +0x0207=0x0000 +0x0208=0x0070 +0x0209=0x0000 +0x020A=0x0080 +0x020B=0x4000 +0x020C=0x7FFF +0x0240=0x0020 +0x0241=0x0000 +0x0242=0x0000 +0x0243=0x0000 +0x0244=0x0000 +0x0245=0x0000 +0x0246=0x0000 +0x0247=0x0000 +0x0248=0x0000 +0x0249=0x0000 +0x024A=0x0000 +0x024B=0x0000 +0x024C=0x0000 +0x024D=0x0000 +0x024E=0x0000 +0x024F=0x0000 +0x0250=0x0000 +0x0251=0x0000 +0x0252=0x0000 +0x0253=0x0000 +0x0254=0x0000 +0x0255=0x0000 +0x0256=0x0000 +0x0257=0x0000 +0x0258=0x0000 +0x0259=0x0000 +0x025A=0x0000 +0x025B=0x0000 +0x025C=0x0000 +0x025D=0x0000 +0x025E=0x0000 +0x025F=0x0000 +0x0260=0x0000 +0x0261=0x0000 +0x0280=0x0000 +0x0281=0x0000 +0x0282=0x0000 +0x0283=0x0000 +0x0284=0x0000 +0x0285=0x0000 +0x0286=0x0000 +0x0287=0x0000 +0x0288=0x0000 +0x0289=0x0000 +0x028A=0x0000 +0x028B=0x0000 +0x028C=0x0000 +0x028D=0x0000 +0x028E=0x0000 +0x028F=0x0000 +0x0290=0x0000 +0x0291=0x0000 +0x0292=0x0000 +0x0293=0x0000 +0x0294=0x0000 +0x0295=0x0000 +0x0296=0x0000 +0x0297=0x0000 +0x0298=0x0000 +0x0299=0x0000 +0x029A=0x0000 +0x029B=0x0000 +0x029C=0x0000 +0x029D=0x0000 +0x029E=0x0000 +0x029F=0x0000 +0x02A0=0x0000 +0x02A1=0x0000 +0x02A2=0x0000 +0x02A3=0x0000 +0x02A4=0x0000 +0x02A5=0x0000 +0x02A6=0x0000 +0x02A7=0x0000 +0x02C0=0x0000 +0x02C1=0x0000 +0x02C2=0x0000 +0x02C3=0x0000 +0x02C4=0x0000 +0x02C5=0x0000 +0x02C6=0x0000 +0x02C7=0x0000 +0x02C8=0x0000 +0x02C9=0x0000 +0x02CA=0x0000 +0x02CB=0x0000 +0x02CC=0x0000 +0x02CD=0x0000 +0x02CE=0x0000 +0x02CF=0x0000 +0x02D0=0x0000 +0x02D1=0x0000 +0x02D2=0x0000 +0x02D3=0x0000 +0x02D4=0x0000 +0x02D5=0x0000 +0x02D6=0x0000 +0x02D7=0x0000 +0x02D8=0x0000 +0x02D9=0x0000 +0x02DA=0x0000 +0x02DB=0x0000 +0x02DC=0x0000 +0x02DD=0x0000 +0x02DE=0x0000 +0x02DF=0x0000 +0x02E0=0x0000 +0x02E1=0x0000 +0x02E2=0x0000 +0x02E3=0x0000 +0x02E4=0x0000 +0x02E5=0x0000 +0x02E6=0x0000 +0x02E7=0x0000 +0x0300=0x0000 +0x0301=0x0000 +0x0302=0x0000 +0x0303=0x0000 +0x0304=0x0000 +0x0305=0x0000 +0x0306=0x0000 +0x0307=0x0000 +0x0308=0x0000 +0x0309=0x0000 +0x030A=0x0000 +0x030B=0x0000 +0x030C=0x0000 +0x030D=0x0000 +0x030E=0x0000 +0x030F=0x0000 +0x0310=0x0000 +0x0311=0x0000 +0x0312=0x0000 +0x0313=0x0000 +0x0314=0x0000 +0x0315=0x0000 +0x0316=0x0000 +0x0317=0x0000 +0x0318=0x0000 +0x0319=0x0000 +0x031A=0x0000 +0x031B=0x0000 +0x031C=0x0000 +0x031D=0x0000 +0x031E=0x0000 +0x031F=0x0000 +0x0320=0x0000 +0x0321=0x0000 +0x0322=0x0000 +0x0323=0x0000 +0x0324=0x0000 +0x0325=0x0000 +0x0326=0x0000 +0x0327=0x0000 +0x0340=0x0000 +0x0341=0x0000 +0x0342=0x0000 +0x0343=0x0000 +0x0344=0x0000 +0x0345=0x0000 +0x0346=0x0000 +0x0347=0x0000 +0x0348=0x0000 +0x0349=0x0000 +0x034A=0x0000 +0x034B=0x0000 +0x034C=0x0000 +0x034D=0x0000 +0x034E=0x0000 +0x034F=0x0000 +0x0350=0x0000 +0x0351=0x0000 +0x0352=0x0000 +0x0353=0x0000 +0x0354=0x0000 +0x0355=0x0000 +0x0356=0x0000 +0x0357=0x0000 +0x0358=0x0000 +0x0359=0x0000 +0x035A=0x0000 +0x035B=0x0000 +0x035C=0x0000 +0x035D=0x0000 +0x035E=0x0000 +0x035F=0x0000 +0x0360=0x0000 +0x0361=0x0000 +0x0362=0x0000 +0x0363=0x0000 +0x0364=0x0000 +0x0365=0x0000 +0x0366=0x0000 +0x0367=0x0000 +0x0380=0x0000 +0x0381=0x0000 +0x0382=0x0000 +0x0383=0x0000 +0x0384=0x0000 +0x0385=0x0000 +0x0386=0x0000 +0x0387=0x0000 +0x0388=0x0000 +0x0389=0x0000 +0x038A=0x0000 +0x038B=0x0000 +0x038C=0x0000 +0x038D=0x0000 +0x038E=0x0000 +0x038F=0x0000 +0x0390=0x0000 +0x0391=0x0000 +0x0392=0x0000 +0x0393=0x0000 +0x0394=0x0000 +0x0395=0x0000 +0x0396=0x0000 +0x0397=0x0000 +0x0398=0x0000 +0x0399=0x0000 +0x039A=0x0000 +0x039B=0x0000 +0x039C=0x0000 +0x039D=0x0000 +0x039E=0x0000 +0x039F=0x0000 +0x03A0=0x0000 +0x03A1=0x0000 +0x03A2=0x0000 +0x03A3=0x0000 +0x03A4=0x0000 +0x03A5=0x0000 +0x03A6=0x0000 +0x03A7=0x0000 +0x0400=0x0085 +0x0401=0x07FF +0x0402=0x07FF +0x0403=0x0000 +0x0404=0x0000 +0x0405=0x0000 +0x0406=0x0000 +0x0407=0x0000 +0x0408=0x0000 +0x0409=0x0000 +0x040A=0x0003 +0x040B=0x000F +0x040C=0x00FC +0x040D=0x0000 +0x040E=0x0000 +0x040F=0x0000 +0x0440=0x0020 +0x0441=0x0000 +0x0442=0x0563 +0x0443=0xB490 +0x0444=0x02B1 +0x0445=0xDA48 +0x0446=0x0000 +0x0447=0x0000 +0x0448=0x0000 +0x0449=0x0000 +0x044A=0x0000 +0x044B=0x0000 +0x044C=0x0000 +0x044D=0x0000 +0x044E=0x0000 +0x044F=0x0000 +0x0450=0x0000 +0x0451=0x0000 +0x0452=0x0000 +0x0453=0x0000 +0x0454=0x0000 +0x0455=0x0000 +0x0456=0x0000 +0x0457=0x0000 +0x0458=0x0000 +0x0459=0x0000 +0x045A=0x0000 +0x045B=0x0000 +0x045C=0x0000 +0x045D=0x0000 +0x045E=0x0000 +0x045F=0x0000 +0x0460=0x0000 +0x0461=0x0000 +0x0480=0x0000 +0x0481=0x0000 +0x0482=0x0000 +0x0483=0x0000 +0x0484=0x0000 +0x0485=0x0000 +0x0486=0x0000 +0x0487=0x0000 +0x0488=0x0000 +0x0489=0x0000 +0x048A=0x0000 +0x048B=0x0000 +0x048C=0x0000 +0x048D=0x0000 +0x048E=0x0000 +0x048F=0x0000 +0x0490=0x0000 +0x0491=0x0000 +0x0492=0x0000 +0x0493=0x0000 +0x0494=0x0000 +0x0495=0x0000 +0x0496=0x0000 +0x0497=0x0000 +0x0498=0x0000 +0x0499=0x0000 +0x049A=0x0000 +0x049B=0x0000 +0x049C=0x0000 +0x049D=0x0000 +0x049E=0x0000 +0x049F=0x0000 +0x04A0=0x0000 +0x04A1=0x0000 +0x04A2=0x0000 +0x04A3=0x0000 +0x04A4=0x0000 +0x04A5=0x0000 +0x04A6=0x0000 +0x04A7=0x0000 +0x04C0=0x0000 +0x04C1=0x0000 +0x04C2=0x0000 +0x04C3=0x0000 +0x04C4=0x0000 +0x04C5=0x0000 +0x04C6=0x0000 +0x04C7=0x0000 +0x04C8=0x0000 +0x04C9=0x0000 +0x04CA=0x0000 +0x04CB=0x0000 +0x04CC=0x0000 +0x04CD=0x0000 +0x04CE=0x0000 +0x04CF=0x0000 +0x04D0=0x0000 +0x04D1=0x0000 +0x04D2=0x0000 +0x04D3=0x0000 +0x04D4=0x0000 +0x04D5=0x0000 +0x04D6=0x0000 +0x04D7=0x0000 +0x04D8=0x0000 +0x04D9=0x0000 +0x04DA=0x0000 +0x04DB=0x0000 +0x04DC=0x0000 +0x04DD=0x0000 +0x04DE=0x0000 +0x04DF=0x0000 +0x04E0=0x0000 +0x04E1=0x0000 +0x04E2=0x0000 +0x04E3=0x0000 +0x04E4=0x0000 +0x04E5=0x0000 +0x04E6=0x0000 +0x04E7=0x0000 +0x0500=0x0000 +0x0501=0x0000 +0x0502=0x0000 +0x0503=0x0000 +0x0504=0x0000 +0x0505=0x0000 +0x0506=0x0000 +0x0507=0x0000 +0x0508=0x0000 +0x0509=0x0000 +0x050A=0x0000 +0x050B=0x0000 +0x050C=0x0000 +0x050D=0x0000 +0x050E=0x0000 +0x050F=0x0000 +0x0510=0x0000 +0x0511=0x0000 +0x0512=0x0000 +0x0513=0x0000 +0x0514=0x0000 +0x0515=0x0000 +0x0516=0x0000 +0x0517=0x0000 +0x0518=0x0000 +0x0519=0x0000 +0x051A=0x0000 +0x051B=0x0000 +0x051C=0x0000 +0x051D=0x0000 +0x051E=0x0000 +0x051F=0x0000 +0x0520=0x0000 +0x0521=0x0000 +0x0522=0x0000 +0x0523=0x0000 +0x0524=0x0000 +0x0525=0x0000 +0x0526=0x0000 +0x0527=0x0000 +0x0540=0x0000 +0x0541=0x0000 +0x0542=0x0000 +0x0543=0x0000 +0x0544=0x0000 +0x0545=0x0000 +0x0546=0x0000 +0x0547=0x0000 +0x0548=0x0000 +0x0549=0x0000 +0x054A=0x0000 +0x054B=0x0000 +0x054C=0x0000 +0x054D=0x0000 +0x054E=0x0000 +0x054F=0x0000 +0x0550=0x0000 +0x0551=0x0000 +0x0552=0x0000 +0x0553=0x0000 +0x0554=0x0000 +0x0555=0x0000 +0x0556=0x0000 +0x0557=0x0000 +0x0558=0x0000 +0x0559=0x0000 +0x055A=0x0000 +0x055B=0x0000 +0x055C=0x0000 +0x055D=0x0000 +0x055E=0x0000 +0x055F=0x0000 +0x0560=0x0000 +0x0561=0x0000 +0x0562=0x0000 +0x0563=0x0000 +0x0564=0x0000 +0x0565=0x0000 +0x0566=0x0000 +0x0567=0x0000 +0x0580=0x0000 +0x0581=0x0000 +0x0582=0x0000 +0x0583=0x0000 +0x0584=0x0000 +0x0585=0x0000 +0x0586=0x0000 +0x0587=0x0000 +0x0588=0x0000 +0x0589=0x0000 +0x058A=0x0000 +0x058B=0x0000 +0x058C=0x0000 +0x058D=0x0000 +0x058E=0x0000 +0x058F=0x0000 +0x0590=0x0000 +0x0591=0x0000 +0x0592=0x0000 +0x0593=0x0000 +0x0594=0x0000 +0x0595=0x0000 +0x0596=0x0000 +0x0597=0x0000 +0x0598=0x0000 +0x0599=0x0000 +0x059A=0x0000 +0x059B=0x0000 +0x059C=0x0000 +0x059D=0x0000 +0x059E=0x0000 +0x059F=0x0000 +0x05A0=0x0000 +0x05A1=0x0000 +0x05A2=0x0000 +0x05A3=0x0000 +0x05A4=0x0000 +0x05A5=0x0000 +0x05A6=0x0000 +0x05A7=0x0000 +[lms7002_registers_b] +0x0100=0x3409 +0x0101=0x7800 +0x0102=0x3180 +0x0103=0x0A12 +0x0104=0x0088 +0x0105=0x0007 +0x0106=0x3182 +0x0107=0x318C +0x0108=0x9442 +0x0109=0x61C1 +0x010A=0x104C +0x010C=0x88FD +0x010D=0x009E +0x010E=0x2040 +0x010F=0x3042 +0x0110=0x0BF4 +0x0111=0x0083 +0x0112=0xC0E6 +0x0113=0x03C3 +0x0114=0x008D +0x0115=0x0009 +0x0116=0x8180 +0x0117=0x280C +0x0118=0x018C +0x0119=0x18CB +0x011A=0x2E02 +0x011C=0xA941 +0x011D=0xEC4E +0x011E=0x04E4 +0x011F=0x3600 +0x0120=0xB9FF +0x0121=0x3348 +0x0122=0x033F +0x0123=0x267B +0x0124=0x0000 +0x0200=0x0101 +0x0201=0x05BD +0x0202=0x0779 +0x0203=0x0F9E +0x0204=0xBCC2 +0x0205=0x0000 +0x0206=0x0000 +0x0207=0x0000 +0x0208=0x0070 +0x0209=0x0000 +0x020A=0x0080 +0x020B=0x4000 +0x020C=0x7FFF +0x0240=0x0020 +0x0241=0x0000 +0x0242=0x0000 +0x0243=0x0000 +0x0244=0x0000 +0x0245=0x0000 +0x0246=0x0000 +0x0247=0x0000 +0x0248=0x0000 +0x0249=0x0000 +0x024A=0x0000 +0x024B=0x0000 +0x024C=0x0000 +0x024D=0x0000 +0x024E=0x0000 +0x024F=0x0000 +0x0250=0x0000 +0x0251=0x0000 +0x0252=0x0000 +0x0253=0x0000 +0x0254=0x0000 +0x0255=0x0000 +0x0256=0x0000 +0x0257=0x0000 +0x0258=0x0000 +0x0259=0x0000 +0x025A=0x0000 +0x025B=0x0000 +0x025C=0x0000 +0x025D=0x0000 +0x025E=0x0000 +0x025F=0x0000 +0x0260=0x0000 +0x0261=0x0000 +0x0280=0x0000 +0x0281=0x0000 +0x0282=0x0000 +0x0283=0x0000 +0x0284=0x0000 +0x0285=0x0000 +0x0286=0x0000 +0x0287=0x0000 +0x0288=0x0000 +0x0289=0x0000 +0x028A=0x0000 +0x028B=0x0000 +0x028C=0x0000 +0x028D=0x0000 +0x028E=0x0000 +0x028F=0x0000 +0x0290=0x0000 +0x0291=0x0000 +0x0292=0x0000 +0x0293=0x0000 +0x0294=0x0000 +0x0295=0x0000 +0x0296=0x0000 +0x0297=0x0000 +0x0298=0x0000 +0x0299=0x0000 +0x029A=0x0000 +0x029B=0x0000 +0x029C=0x0000 +0x029D=0x0000 +0x029E=0x0000 +0x029F=0x0000 +0x02A0=0x0000 +0x02A1=0x0000 +0x02A2=0x0000 +0x02A3=0x0000 +0x02A4=0x0000 +0x02A5=0x0000 +0x02A6=0x0000 +0x02A7=0x0000 +0x02C0=0x0000 +0x02C1=0x0000 +0x02C2=0x0000 +0x02C3=0x0000 +0x02C4=0x0000 +0x02C5=0x0000 +0x02C6=0x0000 +0x02C7=0x0000 +0x02C8=0x0000 +0x02C9=0x0000 +0x02CA=0x0000 +0x02CB=0x0000 +0x02CC=0x0000 +0x02CD=0x0000 +0x02CE=0x0000 +0x02CF=0x0000 +0x02D0=0x0000 +0x02D1=0x0000 +0x02D2=0x0000 +0x02D3=0x0000 +0x02D4=0x0000 +0x02D5=0x0000 +0x02D6=0x0000 +0x02D7=0x0000 +0x02D8=0x0000 +0x02D9=0x0000 +0x02DA=0x0000 +0x02DB=0x0000 +0x02DC=0x0000 +0x02DD=0x0000 +0x02DE=0x0000 +0x02DF=0x0000 +0x02E0=0x0000 +0x02E1=0x0000 +0x02E2=0x0000 +0x02E3=0x0000 +0x02E4=0x0000 +0x02E5=0x0000 +0x02E6=0x0000 +0x02E7=0x0000 +0x0300=0x0000 +0x0301=0x0000 +0x0302=0x0000 +0x0303=0x0000 +0x0304=0x0000 +0x0305=0x0000 +0x0306=0x0000 +0x0307=0x0000 +0x0308=0x0000 +0x0309=0x0000 +0x030A=0x0000 +0x030B=0x0000 +0x030C=0x0000 +0x030D=0x0000 +0x030E=0x0000 +0x030F=0x0000 +0x0310=0x0000 +0x0311=0x0000 +0x0312=0x0000 +0x0313=0x0000 +0x0314=0x0000 +0x0315=0x0000 +0x0316=0x0000 +0x0317=0x0000 +0x0318=0x0000 +0x0319=0x0000 +0x031A=0x0000 +0x031B=0x0000 +0x031C=0x0000 +0x031D=0x0000 +0x031E=0x0000 +0x031F=0x0000 +0x0320=0x0000 +0x0321=0x0000 +0x0322=0x0000 +0x0323=0x0000 +0x0324=0x0000 +0x0325=0x0000 +0x0326=0x0000 +0x0327=0x0000 +0x0340=0x0000 +0x0341=0x0000 +0x0342=0x0000 +0x0343=0x0000 +0x0344=0x0000 +0x0345=0x0000 +0x0346=0x0000 +0x0347=0x0000 +0x0348=0x0000 +0x0349=0x0000 +0x034A=0x0000 +0x034B=0x0000 +0x034C=0x0000 +0x034D=0x0000 +0x034E=0x0000 +0x034F=0x0000 +0x0350=0x0000 +0x0351=0x0000 +0x0352=0x0000 +0x0353=0x0000 +0x0354=0x0000 +0x0355=0x0000 +0x0356=0x0000 +0x0357=0x0000 +0x0358=0x0000 +0x0359=0x0000 +0x035A=0x0000 +0x035B=0x0000 +0x035C=0x0000 +0x035D=0x0000 +0x035E=0x0000 +0x035F=0x0000 +0x0360=0x0000 +0x0361=0x0000 +0x0362=0x0000 +0x0363=0x0000 +0x0364=0x0000 +0x0365=0x0000 +0x0366=0x0000 +0x0367=0x0000 +0x0380=0x0000 +0x0381=0x0000 +0x0382=0x0000 +0x0383=0x0000 +0x0384=0x0000 +0x0385=0x0000 +0x0386=0x0000 +0x0387=0x0000 +0x0388=0x0000 +0x0389=0x0000 +0x038A=0x0000 +0x038B=0x0000 +0x038C=0x0000 +0x038D=0x0000 +0x038E=0x0000 +0x038F=0x0000 +0x0390=0x0000 +0x0391=0x0000 +0x0392=0x0000 +0x0393=0x0000 +0x0394=0x0000 +0x0395=0x0000 +0x0396=0x0000 +0x0397=0x0000 +0x0398=0x0000 +0x0399=0x0000 +0x039A=0x0000 +0x039B=0x0000 +0x039C=0x0000 +0x039D=0x0000 +0x039E=0x0000 +0x039F=0x0000 +0x03A0=0x0000 +0x03A1=0x0000 +0x03A2=0x0000 +0x03A3=0x0000 +0x03A4=0x0000 +0x03A5=0x0000 +0x03A6=0x0000 +0x03A7=0x0000 +0x0400=0x0105 +0x0401=0x07FF +0x0402=0x079B +0x0403=0x0FF5 +0x0404=0x0000 +0x0405=0x0000 +0x0406=0x0000 +0x0407=0x0000 +0x0408=0x0000 +0x0409=0x0000 +0x040A=0x0000 +0x040B=0x7FFF +0x040C=0x00FC +0x040D=0x0000 +0x040E=0x0000 +0x040F=0x0000 +0x0440=0x0020 +0x0441=0x0000 +0x0442=0x0000 +0x0443=0x0000 +0x0444=0x0000 +0x0445=0x0000 +0x0446=0x0000 +0x0447=0x0000 +0x0448=0x0000 +0x0449=0x0000 +0x044A=0x0000 +0x044B=0x0000 +0x044C=0x0000 +0x044D=0x0000 +0x044E=0x0000 +0x044F=0x0000 +0x0450=0x0000 +0x0451=0x0000 +0x0452=0x0000 +0x0453=0x0000 +0x0454=0x0000 +0x0455=0x0000 +0x0456=0x0000 +0x0457=0x0000 +0x0458=0x0000 +0x0459=0x0000 +0x045A=0x0000 +0x045B=0x0000 +0x045C=0x0000 +0x045D=0x0000 +0x045E=0x0000 +0x045F=0x0000 +0x0460=0x0000 +0x0461=0x0000 +0x0480=0x0000 +0x0481=0x0000 +0x0482=0x0000 +0x0483=0x0000 +0x0484=0x0000 +0x0485=0x0000 +0x0486=0x0000 +0x0487=0x0000 +0x0488=0x0000 +0x0489=0x0000 +0x048A=0x0000 +0x048B=0x0000 +0x048C=0x0000 +0x048D=0x0000 +0x048E=0x0000 +0x048F=0x0000 +0x0490=0x0000 +0x0491=0x0000 +0x0492=0x0000 +0x0493=0x0000 +0x0494=0x0000 +0x0495=0x0000 +0x0496=0x0000 +0x0497=0x0000 +0x0498=0x0000 +0x0499=0x0000 +0x049A=0x0000 +0x049B=0x0000 +0x049C=0x0000 +0x049D=0x0000 +0x049E=0x0000 +0x049F=0x0000 +0x04A0=0x0000 +0x04A1=0x0000 +0x04A2=0x0000 +0x04A3=0x0000 +0x04A4=0x0000 +0x04A5=0x0000 +0x04A6=0x0000 +0x04A7=0x0000 +0x04C0=0x0000 +0x04C1=0x0000 +0x04C2=0x0000 +0x04C3=0x0000 +0x04C4=0x0000 +0x04C5=0x0000 +0x04C6=0x0000 +0x04C7=0x0000 +0x04C8=0x0000 +0x04C9=0x0000 +0x04CA=0x0000 +0x04CB=0x0000 +0x04CC=0x0000 +0x04CD=0x0000 +0x04CE=0x0000 +0x04CF=0x0000 +0x04D0=0x0000 +0x04D1=0x0000 +0x04D2=0x0000 +0x04D3=0x0000 +0x04D4=0x0000 +0x04D5=0x0000 +0x04D6=0x0000 +0x04D7=0x0000 +0x04D8=0x0000 +0x04D9=0x0000 +0x04DA=0x0000 +0x04DB=0x0000 +0x04DC=0x0000 +0x04DD=0x0000 +0x04DE=0x0000 +0x04DF=0x0000 +0x04E0=0x0000 +0x04E1=0x0000 +0x04E2=0x0000 +0x04E3=0x0000 +0x04E4=0x0000 +0x04E5=0x0000 +0x04E6=0x0000 +0x04E7=0x0000 +0x0500=0x0000 +0x0501=0x0000 +0x0502=0x0000 +0x0503=0x0000 +0x0504=0x0000 +0x0505=0x0000 +0x0506=0x0000 +0x0507=0x0000 +0x0508=0x0000 +0x0509=0x0000 +0x050A=0x0000 +0x050B=0x0000 +0x050C=0x0000 +0x050D=0x0000 +0x050E=0x0000 +0x050F=0x0000 +0x0510=0x0000 +0x0511=0x0000 +0x0512=0x0000 +0x0513=0x0000 +0x0514=0x0000 +0x0515=0x0000 +0x0516=0x0000 +0x0517=0x0000 +0x0518=0x0000 +0x0519=0x0000 +0x051A=0x0000 +0x051B=0x0000 +0x051C=0x0000 +0x051D=0x0000 +0x051E=0x0000 +0x051F=0x0000 +0x0520=0x0000 +0x0521=0x0000 +0x0522=0x0000 +0x0523=0x0000 +0x0524=0x0000 +0x0525=0x0000 +0x0526=0x0000 +0x0527=0x0000 +0x0540=0x0000 +0x0541=0x0000 +0x0542=0x0000 +0x0543=0x0000 +0x0544=0x0000 +0x0545=0x0000 +0x0546=0x0000 +0x0547=0x0000 +0x0548=0x0000 +0x0549=0x0000 +0x054A=0x0000 +0x054B=0x0000 +0x054C=0x0000 +0x054D=0x0000 +0x054E=0x0000 +0x054F=0x0000 +0x0550=0x0000 +0x0551=0x0000 +0x0552=0x0000 +0x0553=0x0000 +0x0554=0x0000 +0x0555=0x0000 +0x0556=0x0000 +0x0557=0x0000 +0x0558=0x0000 +0x0559=0x0000 +0x055A=0x0000 +0x055B=0x0000 +0x055C=0x0000 +0x055D=0x0000 +0x055E=0x0000 +0x055F=0x0000 +0x0560=0x0000 +0x0561=0x0000 +0x0562=0x0000 +0x0563=0x0000 +0x0564=0x0000 +0x0565=0x0000 +0x0566=0x0000 +0x0567=0x0000 +0x0580=0x0000 +0x0581=0x0000 +0x0582=0x0000 +0x0583=0x0000 +0x0584=0x0000 +0x0585=0x0000 +0x0586=0x0000 +0x0587=0x0000 +0x0588=0x0000 +0x0589=0x0000 +0x058A=0x0000 +0x058B=0x0000 +0x058C=0x0000 +0x058D=0x0000 +0x058E=0x0000 +0x058F=0x0000 +0x0590=0x0000 +0x0591=0x0000 +0x0592=0x0000 +0x0593=0x0000 +0x0594=0x0000 +0x0595=0x0000 +0x0596=0x0000 +0x0597=0x0000 +0x0598=0x0000 +0x0599=0x0000 +0x059A=0x0000 +0x059B=0x0000 +0x059C=0x0000 +0x059D=0x0000 +0x059E=0x0000 +0x059F=0x0000 +0x05A0=0x0000 +0x05A1=0x0000 +0x05A2=0x0000 +0x05A3=0x0000 +0x05A4=0x0000 +0x05A5=0x0000 +0x05A6=0x0000 +0x05A7=0x0000 +[reference_clocks] +sxr_ref_clk_mhz=52 +sxt_ref_clk_mhz=52 diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band4.tm1.usrpb210.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band4.tm1.usrpb210.conf index ee4700c771..853db14393 100644 --- a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band4.tm1.usrpb210.conf +++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band4.tm1.usrpb210.conf @@ -17,7 +17,7 @@ eNBs = mobile_country_code = "208"; - mobile_network_code = "92"; + mobile_network_code = "93"; ////////// Physical parameters: @@ -36,7 +36,7 @@ eNBs = nb_antennas_tx = 1; nb_antennas_rx = 1; tx_gain = 90; - rx_gain = 120; + rx_gain = 128; prach_root = 0; prach_config_index = 0; prach_high_speed = "DISABLE"; @@ -66,7 +66,7 @@ eNBs = pusch_p0_Nominal = -90; pusch_alpha = "AL1"; - pucch_p0_Nominal = -108; + pucch_p0_Nominal = -96; msg3_delta_Preamble = 6; pucch_deltaF_Format1 = "deltaF2"; pucch_deltaF_Format1b = "deltaF3"; @@ -131,7 +131,7 @@ eNBs = }; ////////// MME parameters: - mme_ip_address = ( { ipv4 = "192.168.13.11"; + mme_ip_address = ( { ipv4 = "192.168.12.11"; ipv6 = "192:168:30::17"; active = "yes"; preference = "ipv4"; @@ -141,10 +141,10 @@ eNBs = NETWORK_INTERFACES : { ENB_INTERFACE_NAME_FOR_S1_MME = "eth0"; - ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.13.10/24"; + ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.215/24"; ENB_INTERFACE_NAME_FOR_S1U = "eth0"; - ENB_IPV4_ADDRESS_FOR_S1U = "192.168.13.10/24"; + ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.215/24"; ENB_PORT_FOR_S1U = 2152; # Spec 2152 }; diff --git a/targets/RT/USER/lte-softmodem.c b/targets/RT/USER/lte-softmodem.c index e67bcb6b07..612239bec3 100644 --- a/targets/RT/USER/lte-softmodem.c +++ b/targets/RT/USER/lte-softmodem.c @@ -290,6 +290,8 @@ double bw = 10.0e6; static int tx_max_power[MAX_NUM_CCs]; /* = {0,0}*/; +char rf_config_file[1024]; + int chain_offset=0; #ifndef EXMIMO @@ -411,6 +413,7 @@ void help (void) { printf(" sudo -E lte-softmodem [options]\n"); printf(" sudo -E ./lte-softmodem -O ../../../targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.openEPC.conf -S -V -m 26 -t 16 -x 1 --ulsch-max-errors 100 -W\n\n"); printf("Options:\n"); + printf(" --rf-config-file Configuration file for front-end (e.g. LMS7002M)\n"); printf(" --ulsch-max-errors set the max ULSCH erros\n"); printf(" --calib-ue-rx set UE RX calibration\n"); printf(" --calib-ue-rx-med \n"); @@ -2051,6 +2054,7 @@ static void get_options (int argc, char **argv) enum long_option_e { LONG_OPTION_START = 0x100, /* Start after regular single char options */ + LONG_OPTION_RF_CONFIG_FILE, LONG_OPTION_ULSCH_MAX_CONSECUTIVE_ERRORS, LONG_OPTION_CALIB_UE_RX, LONG_OPTION_CALIB_UE_RX_MED, @@ -2067,6 +2071,7 @@ static void get_options (int argc, char **argv) }; static const struct option long_options[] = { + {"rf-config-file",required_argument, NULL, LONG_OPTION_RF_CONFIG_FILE}, {"ulsch-max-errors",required_argument, NULL, LONG_OPTION_ULSCH_MAX_CONSECUTIVE_ERRORS}, {"calib-ue-rx", required_argument, NULL, LONG_OPTION_CALIB_UE_RX}, {"calib-ue-rx-med", required_argument, NULL, LONG_OPTION_CALIB_UE_RX_MED}, @@ -2085,11 +2090,19 @@ static void get_options (int argc, char **argv) while ((c = getopt_long (argc, argv, "A:a:C:dEK:g:F:G:hqO:m:SUVRM:r:P:Ws:t:Tx:",long_options,NULL)) != -1) { switch (c) { + case LONG_OPTION_RF_CONFIG_FILE: + if (strlen(optarg)<=1024) + strcpy(rf_config_file,optarg); + else { + printf("Configuration filename is too long\n"); + exit(-1); + } + break; case LONG_OPTION_MAXPOWER: tx_max_power[0]=atoi(optarg); for (CC_id=1;CC_id Date: Tue, 26 Jan 2016 00:18:34 -0800 Subject: [PATCH 07/55] added configuration file for SoDeRa --- targets/ARCH/SODERA/SoDeRa_MIMO.ini | 1128 +++++++++++++++++++++++++++ 1 file changed, 1128 insertions(+) create mode 100755 targets/ARCH/SODERA/SoDeRa_MIMO.ini diff --git a/targets/ARCH/SODERA/SoDeRa_MIMO.ini b/targets/ARCH/SODERA/SoDeRa_MIMO.ini new file mode 100755 index 0000000000..a3feaa269b --- /dev/null +++ b/targets/ARCH/SODERA/SoDeRa_MIMO.ini @@ -0,0 +1,1128 @@ +[file_info] +type=lms7002m_minimal_config +version=1 +[lms7002_registers_a] +0x0493=0x0000 +0x0492=0x0000 +0x0491=0x0000 +0x029B=0x0000 +0x048E=0x0000 +0x0022=0x07FF +0x0283=0x0000 +0x0487=0x0000 +0x0486=0x0000 +0x045F=0x0000 +0x0480=0x0000 +0x0460=0x0000 +0x0447=0x0000 +0x045A=0x0000 +0x02DA=0x0000 +0x0458=0x0000 +0x0314=0x0000 +0x0456=0x0000 +0x0559=0xACB9 +0x0451=0x0000 +0x0390=0x0000 +0x044B=0x0000 +0x0448=0x0000 +0x0454=0x0000 +0x0446=0x0000 +0x04CA=0x0000 +0x0444=0x02B1 +0x0443=0xCCCD +0x0508=0xEF99 +0x0441=0x0000 +0x040D=0x0000 +0x040B=0x000F +0x0409=0x0000 +0x0580=0xEFF2 +0x0407=0x0000 +0x0405=0x0000 +0x0254=0x0000 +0x0404=0x0000 +0x00A0=0x6565 +0x0560=0x174B +0x0403=0x0000 +0x0402=0x07FF +0x055E=0xDB10 +0x03A7=0x0000 +0x0520=0x174B +0x03A5=0x0000 +0x03A4=0x0000 +0x03A3=0x0000 +0x03A2=0x0000 +0x051C=0x0000 +0x048D=0x0000 +0x059A=0x0000 +0x03A1=0x0000 +0x02A2=0x0000 +0x04E1=0x0000 +0x039F=0x0000 +0x0248=0x0000 +0x039B=0x0000 +0x0408=0x0000 +0x0398=0x0000 +0x0393=0x0000 +0x0305=0x0000 +0x038E=0x0000 +0x0324=0x0000 +0x02E7=0x0000 +0x038D=0x0000 +0x0387=0x0000 +0x03A0=0x0000 +0x02D0=0x0000 +0x009A=0x658C +0x054E=0x8184 +0x0386=0x0000 +0x040F=0x0000 +0x04E3=0x0000 +0x0389=0x0000 +0x054F=0x18C9 +0x0385=0x0000 +0x0315=0x0000 +0x0384=0x0000 +0x0382=0x0000 +0x0288=0x0000 +0x0366=0x0000 +0x0365=0x0000 +0x0364=0x0000 +0x0325=0x0000 +0x0081=0x0000 +0x0362=0x0000 +0x038A=0x0000 +0x035E=0x0000 +0x035D=0x0000 +0x0442=0x0CCC +0x0449=0x0000 +0x035A=0x0000 +0x02C8=0x0000 +0x0452=0x0000 +0x0299=0x0000 +0x0359=0x0000 +0x0358=0x0000 +0x048B=0x0000 +0x0354=0x0000 +0x0351=0x0000 +0x03A6=0x0000 +0x0293=0x0000 +0x034E=0x0000 +0x035C=0x0000 +0x034D=0x0000 +0x034B=0x0000 +0x011A=0x2E02 +0x0455=0x0000 +0x034A=0x0000 +0x0348=0x0000 +0x0084=0x0400 +0x0498=0x0000 +0x035B=0x0000 +0x0505=0x00D8 +0x0345=0x0000 +0x0484=0x0000 +0x0586=0x196B +0x0344=0x0000 +0x0561=0xAB08 +0x0343=0x0000 +0x0342=0x0000 +0x0380=0x0000 +0x0327=0x0000 +0x0322=0x0000 +0x059B=0x0000 +0x0321=0x0000 +0x045E=0x0000 +0x0440=0x0020 +0x031D=0x0000 +0x0363=0x0000 +0x031A=0x0000 +0x031C=0x0000 +0x028F=0x0000 +0x0341=0x0000 +0x0287=0x0000 +0x0318=0x0000 +0x031F=0x0000 +0x0316=0x0000 +0x030D=0x0000 +0x040E=0x0000 +0x0352=0x0000 +0x028C=0x0000 +0x0360=0x0000 +0x0313=0x0000 +0x0461=0x0000 +0x010A=0x104C +0x051B=0xB77F +0x0312=0x0000 +0x0346=0x0000 +0x024E=0x0000 +0x0311=0x0000 +0x02D6=0x0000 +0x030C=0x0000 +0x04DF=0x0000 +0x030B=0x0000 +0x0392=0x0000 +0x030A=0x0000 +0x029F=0x0000 +0x0309=0x0000 +0x048A=0x0000 +0x0308=0x0000 +0x0588=0xE6C7 +0x0397=0x0000 +0x02E3=0x0000 +0x049C=0x0000 +0x044A=0x0000 +0x04A4=0x0000 +0x0306=0x0000 +0x0304=0x0000 +0x04D5=0x0000 +0x0303=0x0000 +0x0302=0x0000 +0x0510=0xE6C7 +0x044E=0x0000 +0x0300=0x0000 +0x034F=0x0000 +0x045B=0x0000 +0x02E6=0x0000 +0x00A3=0x6565 +0x04DA=0x0000 +0x025E=0x0000 +0x020A=0x0000 +0x0102=0x3180 +0x020C=0x8000 +0x05A2=0x0000 +0x040A=0x0003 +0x0556=0xA2B5 +0x0243=0x0000 +0x051D=0x4F91 +0x0259=0x0000 +0x02D5=0x0000 +0x02E1=0x0000 +0x011D=0xB555 +0x039E=0x0000 +0x0252=0x0000 +0x0204=0x0000 +0x0255=0x0000 +0x0281=0x0000 +0x0200=0x0081 +0x0594=0xF40D +0x02C5=0x0000 +0x0406=0x0000 +0x030F=0x0000 +0x025D=0x0000 +0x0319=0x0000 +0x0121=0x323C +0x0101=0x7800 +0x025B=0x0000 +0x02C6=0x0000 +0x0558=0x5009 +0x0021=0x0E9F +0x04C2=0x0000 +0x0290=0x0000 +0x02DF=0x0000 +0x0291=0x0000 +0x0296=0x0000 +0x029C=0x0000 +0x028D=0x0000 +0x02A1=0x0000 +0x008B=0x21A6 +0x02A3=0x0000 +0x05A4=0x0000 +0x02A7=0x0000 +0x0483=0x0000 +0x0201=0x07FF +0x02C2=0x0000 +0x02C4=0x0000 +0x044D=0x0000 +0x02E2=0x0000 +0x02D1=0x0000 +0x0546=0x8D44 +0x04C8=0x0000 +0x0207=0x0000 +0x04C6=0x0000 +0x0096=0x0000 +0x0093=0x0000 +0x0250=0x0000 +0x02CB=0x0000 +0x02D3=0x0000 +0x0494=0x0000 +0x04CF=0x0000 +0x025F=0x0000 +0x0251=0x0000 +0x0488=0x0000 +0x0496=0x0000 +0x04C3=0x0000 +0x0100=0x7409 +0x04CC=0x0000 +0x02A5=0x0000 +0x0257=0x0000 +0x04D6=0x0000 +0x04A6=0x0000 +0x049A=0x0000 +0x049B=0x0000 +0x0097=0x0000 +0x011E=0x068E +0x0285=0x0000 +0x0280=0x0000 +0x049E=0x0000 +0x0020=0xFFFD +0x02DD=0x0000 +0x0297=0x0000 +0x049F=0x0000 +0x0522=0xDB10 +0x044C=0x0000 +0x0355=0x0000 +0x04A0=0x0000 +0x02CF=0x0000 +0x04D1=0x0000 +0x0526=0xBE2A +0x0092=0x0001 +0x031B=0x0000 +0x0541=0x4C24 +0x0518=0xEFF2 +0x0543=0xBD96 +0x02C0=0x0000 +0x0499=0x0000 +0x04A1=0x0000 +0x058D=0xF5EF +0x02D7=0x0000 +0x0513=0xDAA2 +0x0549=0x18C9 +0x0552=0x8D44 +0x0521=0x5852 +0x0509=0x0605 +0x0286=0x0000 +0x024F=0x0000 +0x04E0=0x0000 +0x0545=0x364E +0x0349=0x0000 +0x0555=0xBD96 +0x04E4=0x0000 +0x02E4=0x0000 +0x0551=0xD7B7 +0x055D=0xA6B5 +0x0298=0x0000 +0x055F=0x5852 +0x009E=0x658C +0x0547=0xD7B7 +0x0598=0xF61D +0x0123=0x267B +0x0497=0x0000 +0x04A5=0x0000 +0x0565=0xB77F +0x0124=0x0000 +0x0592=0x0DF1 +0x0591=0xFCFE +0x0548=0x79FA +0x04D2=0x0000 +0x0599=0x0000 +0x0511=0x1D10 +0x0506=0x0DF1 +0x0595=0x00BC +0x0584=0xE7E2 +0x0242=0x0000 +0x025A=0x0000 +0x04E2=0x0000 +0x04C5=0x0000 +0x058C=0xEA50 +0x0450=0x0000 +0x0596=0x0A94 +0x05A7=0x0000 +0x058A=0x17DC +0x059D=0x0000 +0x0485=0x0000 +0x058E=0x1316 +0x0550=0x79FA +0x0554=0x6901 +0x0593=0x00D8 +0x0542=0xA2B5 +0x0553=0x364E +0x0563=0x4F91 +0x024D=0x0000 +0x0567=0x4049 +0x055A=0xBE2A +0x0295=0x0000 +0x0566=0x0906 +0x028A=0x0000 +0x059C=0x0000 +0x04DD=0x0000 +0x054C=0x7FFF +0x0582=0x150F +0x0585=0xDAA2 +0x0109=0x61C1 +0x04A2=0x0000 +0x0292=0x0000 +0x059F=0x0000 +0x0583=0x2E45 +0x050E=0x17DC +0x0516=0x150F +0x0523=0xA6B5 +0x0525=0x57AC +0x0206=0x0000 +0x051A=0x0906 +0x055C=0x3347 +0x0514=0xE7E2 +0x050F=0xEA5F +0x05A6=0x0000 +0x051E=0xF524 +0x050A=0x1316 +0x04C7=0x0000 +0x049D=0x0000 +0x0527=0xACB9 +0x050C=0xEA50 +0x0087=0x0000 +0x0399=0x0000 +0x050B=0xF5EF +0x0507=0xFCFE +0x010D=0x015B +0x04C4=0x0000 +0x0495=0x0000 +0x0246=0x0000 +0x0503=0x00BC +0x0320=0x0000 +0x0323=0x0000 +0x02E5=0x0000 +0x055B=0x57AC +0x0114=0x008D +0x04D8=0x0000 +0x04E7=0x0000 +0x04D0=0x0000 +0x04E6=0x0000 +0x00AE=0x0000 +0x0544=0x6901 +0x0258=0x0000 +0x0502=0x0A94 +0x04DE=0x0000 +0x058B=0x0F45 +0x0028=0x0101 +0x029E=0x0000 +0x04DC=0x0000 +0x04D9=0x0000 +0x0557=0x4C24 +0x058F=0x0605 +0x04DB=0x0000 +0x04D7=0x0000 +0x059E=0x0000 +0x024C=0x0000 +0x02DC=0x0000 +0x04D4=0x0000 +0x0504=0xF40D +0x02C3=0x0000 +0x04C1=0x0000 +0x04D3=0x0000 +0x0590=0xEF99 +0x04CE=0x0000 +0x05A5=0x0000 +0x04A7=0x0000 +0x0489=0x0000 +0x02E0=0x0000 +0x0118=0x018C +0x002A=0x0086 +0x0245=0x0000 +0x045D=0x0000 +0x0581=0xC89D +0x02D2=0x0000 +0x039C=0x0000 +0x002B=0x0038 +0x02A0=0x0000 +0x010E=0x0000 +0x0394=0x0000 +0x0459=0x0000 +0x0088=0x0550 +0x0085=0x0001 +0x0089=0x1150 +0x0256=0x0000 +0x0111=0x0083 +0x0095=0x0000 +0x0203=0x0000 +0x030E=0x0000 +0x0482=0x0000 +0x05A0=0x0000 +0x009C=0x658C +0x0381=0x0000 +0x0122=0x033F +0x0110=0x0BFF +0x0026=0x0101 +0x0294=0x0000 +0x009D=0x6565 +0x0524=0x3347 +0x0106=0x3182 +0x028E=0x0000 +0x0326=0x0000 +0x0113=0x03C3 +0x0391=0x0000 +0x04CB=0x0000 +0x010F=0x3042 +0x0119=0x18CB +0x02A6=0x0000 +0x05A1=0x0000 +0x02C9=0x0000 +0x0500=0xF61D +0x039D=0x0000 +0x011F=0x3680 +0x0395=0x0000 +0x024B=0x0000 +0x045C=0x0000 +0x0247=0x0000 +0x0512=0x196B +0x04E5=0x0000 +0x0024=0xE4E4 +0x0353=0x0000 +0x050D=0x0F45 +0x02CD=0x0000 +0x0490=0x0000 +0x0501=0xFDFB +0x034C=0x0000 +0x00AA=0x0000 +0x0350=0x0000 +0x0445=0xDA02 +0x048F=0x0000 +0x008A=0x0514 +0x0453=0x0000 +0x0260=0x0000 +0x00A1=0x6565 +0x0356=0x0000 +0x0241=0x0000 +0x008C=0x267B +0x038F=0x0000 +0x054A=0x8184 +0x00A4=0x6565 +0x0401=0x07FF +0x04CD=0x0000 +0x0249=0x0000 +0x002C=0x0000 +0x054D=0xF7A3 +0x00A6=0x0001 +0x002D=0xFFFF +0x00AC=0x2000 +0x0253=0x0000 +0x028B=0x0000 +0x040C=0x00FC +0x0310=0x0000 +0x0099=0x6565 +0x00A2=0x6565 +0x0589=0xEA5F +0x002F=0x3840 +0x035F=0x0000 +0x0597=0xFDFB +0x0116=0x8180 +0x02CC=0x0000 +0x0025=0x0101 +0x0562=0xF524 +0x011C=0xAD41 +0x0289=0x0000 +0x0282=0x0000 +0x0307=0x0000 +0x038C=0x0000 +0x02C7=0x0000 +0x054B=0xF7A3 +0x0519=0x4049 +0x009F=0x658C +0x025C=0x0000 +0x0515=0x2E45 +0x00A5=0x6565 +0x0301=0x0000 +0x02C1=0x0000 +0x0481=0x0000 +0x0517=0xC89D +0x00A8=0x0000 +0x0564=0x0000 +0x00AB=0x0040 +0x0261=0x0000 +0x002E=0x0000 +0x02DE=0x0000 +0x02A4=0x0000 +0x0540=0x5009 +0x00AD=0x03FF +0x0029=0x0101 +0x024A=0x0000 +0x00A7=0x6565 +0x0027=0xB1E4 +0x0117=0x280C +0x0098=0x0000 +0x0108=0x3042 +0x020B=0x0000 +0x0383=0x0000 +0x0202=0x07FF +0x0086=0x4101 +0x010C=0x8865 +0x02D8=0x0000 +0x0347=0x0000 +0x0457=0x0000 +0x0103=0x0A12 +0x0104=0x0088 +0x0357=0x0000 +0x02DB=0x0000 +0x0400=0x0081 +0x009B=0x6565 +0x0105=0x0007 +0x05A3=0x0000 +0x0240=0x0020 +0x0367=0x0000 +0x044F=0x0000 +0x038B=0x0000 +0x02D9=0x0000 +0x02CE=0x0000 +0x0284=0x0000 +0x0396=0x0000 +0x029A=0x0000 +0x051F=0xAB08 +0x0361=0x0000 +0x0205=0x0000 +0x031E=0x0000 +0x04C0=0x0000 +0x0587=0x1D10 +0x0023=0x5550 +0x048C=0x0000 +0x0112=0xC0E6 +0x039A=0x0000 +0x0115=0x0009 +0x00A9=0x8000 +0x0317=0x0000 +0x0244=0x0000 +0x0094=0x0000 +0x0340=0x0000 +0x0208=0x0170 +0x04A3=0x0000 +0x029D=0x0000 +0x0388=0x0000 +0x0120=0xB9FF +0x04C9=0x0000 +0x02CA=0x0000 +0x0209=0x0000 +0x0082=0x8001 +0x02D4=0x0000 +0x0107=0x318C +[lms7002_registers_b] +0x04E1=0x0000 +0x03A1=0x0000 +0x02A2=0x0000 +0x04E0=0x0000 +0x04DE=0x0000 +0x058B=0x0000 +0x04DC=0x0000 +0x04DB=0x0000 +0x04D9=0x0000 +0x04D5=0x0000 +0x0304=0x0000 +0x04D4=0x0000 +0x0504=0x0000 +0x04D3=0x0000 +0x04D2=0x0000 +0x0548=0x0000 +0x04D0=0x0000 +0x04CF=0x0000 +0x025F=0x0000 +0x04CE=0x0000 +0x04CC=0x0000 +0x02A5=0x0000 +0x04C6=0x0000 +0x0207=0x0000 +0x04C1=0x0000 +0x02C3=0x0000 +0x04C9=0x0000 +0x02CA=0x0000 +0x04C0=0x0000 +0x031E=0x0000 +0x04D6=0x0000 +0x0257=0x0000 +0x04A6=0x0000 +0x04A5=0x0000 +0x04A2=0x0000 +0x0109=0x61C1 +0x049D=0x0000 +0x04C7=0x0000 +0x049C=0x0000 +0x0397=0x0000 +0x02E3=0x0000 +0x0499=0x0000 +0x02C0=0x0000 +0x0496=0x0000 +0x04C3=0x0000 +0x0493=0x0000 +0x04A1=0x0000 +0x0492=0x0000 +0x0491=0x0000 +0x029B=0x0000 +0x048E=0x0000 +0x0283=0x0000 +0x048C=0x0000 +0x048B=0x0000 +0x0358=0x0000 +0x0487=0x0000 +0x0486=0x0000 +0x045F=0x0000 +0x0480=0x0000 +0x0460=0x0000 +0x0447=0x0000 +0x045A=0x0000 +0x02DA=0x0000 +0x0458=0x0000 +0x0314=0x0000 +0x0456=0x0000 +0x0559=0x0000 +0x0453=0x0000 +0x0451=0x0000 +0x0390=0x0000 +0x044D=0x0000 +0x02E2=0x0000 +0x044B=0x0000 +0x0448=0x0000 +0x0454=0x0000 +0x0446=0x0000 +0x04CA=0x0000 +0x0444=0x0000 +0x0443=0x0000 +0x0508=0x0000 +0x0441=0x0000 +0x040D=0x0000 +0x040B=0x7FFF +0x0409=0x0000 +0x0580=0x0000 +0x0407=0x0000 +0x0405=0x0000 +0x0254=0x0000 +0x0404=0x0000 +0x0560=0x0000 +0x04D8=0x0000 +0x0403=0x0000 +0x0402=0x07FF +0x055E=0x0000 +0x03A7=0x0000 +0x0520=0x0000 +0x03A5=0x0000 +0x03A4=0x0000 +0x03A3=0x0000 +0x03A2=0x0000 +0x051C=0x0000 +0x048D=0x0000 +0x059A=0x0000 +0x049E=0x0000 +0x039F=0x0000 +0x0248=0x0000 +0x039B=0x0000 +0x0399=0x0000 +0x0408=0x0000 +0x0398=0x0000 +0x0497=0x0000 +0x0123=0x267B +0x0394=0x0000 +0x0459=0x0000 +0x0393=0x0000 +0x0305=0x0000 +0x038E=0x0000 +0x0324=0x0000 +0x02E7=0x0000 +0x038D=0x0000 +0x0395=0x0000 +0x038A=0x0000 +0x0362=0x0000 +0x0387=0x0000 +0x0200=0x0101 +0x0594=0x0000 +0x02C5=0x0000 +0x02A7=0x0000 +0x0318=0x0000 +0x0544=0x0000 +0x049A=0x0000 +0x0388=0x0000 +0x0120=0xB9FF +0x020A=0x0080 +0x0102=0x3180 +0x0290=0x0000 +0x02DF=0x0000 +0x0291=0x0000 +0x0295=0x0000 +0x055A=0x0000 +0x029C=0x0000 +0x010E=0x2000 +0x02A0=0x0000 +0x010F=0x3042 +0x02A6=0x0000 +0x0119=0x18CB +0x02D2=0x0000 +0x039C=0x0000 +0x028D=0x0000 +0x02A1=0x0000 +0x02C2=0x0000 +0x045E=0x0000 +0x031D=0x0000 +0x0440=0x0020 +0x02C4=0x0000 +0x04D1=0x0000 +0x02CF=0x0000 +0x02C1=0x0000 +0x02C7=0x0000 +0x054B=0x0000 +0x02D3=0x0000 +0x04C8=0x0000 +0x02D1=0x0000 +0x0546=0x0000 +0x0306=0x0000 +0x02D7=0x0000 +0x058D=0x0000 +0x0457=0x0000 +0x02D8=0x0000 +0x0347=0x0000 +0x0103=0x0A12 +0x0104=0x0088 +0x0357=0x0000 +0x02DB=0x0000 +0x0400=0x0101 +0x0209=0x0000 +0x0297=0x0000 +0x02DD=0x0000 +0x029E=0x0000 +0x02DE=0x0000 +0x0527=0x0000 +0x02D5=0x0000 +0x02E1=0x0000 +0x0259=0x0000 +0x0481=0x0000 +0x0517=0x0000 +0x029A=0x0000 +0x051F=0x0000 +0x0483=0x0000 +0x0201=0x07FF +0x0507=0x0000 +0x0321=0x0000 +0x034F=0x0000 +0x0296=0x0000 +0x0510=0x0000 +0x0302=0x0000 +0x038C=0x0000 +0x0307=0x0000 +0x0282=0x0000 +0x0392=0x0000 +0x030B=0x0000 +0x0588=0x0000 +0x0308=0x0000 +0x048A=0x0000 +0x044A=0x0000 +0x04A4=0x0000 +0x04C4=0x0000 +0x010D=0x019C +0x0300=0x0000 +0x0587=0x0000 +0x044E=0x0000 +0x0309=0x0000 +0x0585=0x0000 +0x02E5=0x0000 +0x055B=0x0000 +0x0114=0x008D +0x0323=0x0000 +0x0320=0x0000 +0x0503=0x0000 +0x0513=0x0000 +0x0319=0x0000 +0x0260=0x0000 +0x0549=0x0000 +0x0552=0x0000 +0x0509=0x0000 +0x0521=0x0000 +0x0286=0x0000 +0x04D7=0x0000 +0x059E=0x0000 +0x0557=0x0000 +0x058F=0x0000 +0x0322=0x0000 +0x059B=0x0000 +0x0545=0x0000 +0x0349=0x0000 +0x0555=0x0000 +0x02E4=0x0000 +0x04E4=0x0000 +0x0551=0x0000 +0x0312=0x0000 +0x055D=0x0000 +0x0298=0x0000 +0x055F=0x0000 +0x011D=0x7555 +0x039E=0x0000 +0x0547=0x0000 +0x0598=0x0000 +0x0449=0x0000 +0x0564=0x0000 +0x0242=0x0000 +0x0525=0x0000 +0x0523=0x0000 +0x0565=0x0000 +0x0124=0x0000 +0x0592=0x0000 +0x0591=0x0000 +0x0563=0x0000 +0x024D=0x0000 +0x0567=0x0000 +0x05A5=0x0000 +0x0566=0x0000 +0x030A=0x0000 +0x029F=0x0000 +0x054C=0x0000 +0x0582=0x0000 +0x0599=0x0000 +0x0511=0x0000 +0x0506=0x0000 +0x0301=0x0000 +0x0595=0x0000 +0x0584=0x0000 +0x058C=0x0000 +0x051E=0x0000 +0x05A6=0x0000 +0x050F=0x0000 +0x0590=0x0000 +0x05A0=0x0000 +0x0596=0x0000 +0x05A7=0x0000 +0x0562=0x0000 +0x058A=0x0000 +0x059D=0x0000 +0x0485=0x0000 +0x0581=0x0000 +0x045D=0x0000 +0x0245=0x0000 +0x0310=0x0000 +0x058E=0x0000 +0x05A2=0x0000 +0x054D=0x0000 +0x020C=0x7FFF +0x0589=0x0000 +0x0522=0x0000 +0x049F=0x0000 +0x031F=0x0000 +0x0292=0x0000 +0x059F=0x0000 +0x0583=0x0000 +0x0543=0x0000 +0x0317=0x0000 +0x0244=0x0000 +0x0554=0x0000 +0x0593=0x0000 +0x05A4=0x0000 +0x02A3=0x0000 +0x0553=0x0000 +0x0542=0x0000 +0x0519=0x0000 +0x024F=0x0000 +0x0524=0x0000 +0x0518=0x0000 +0x0354=0x0000 +0x0526=0x0000 +0x031B=0x0000 +0x050E=0x0000 +0x0516=0x0000 +0x02CB=0x0000 +0x0250=0x0000 +0x031C=0x0000 +0x028F=0x0000 +0x051A=0x0000 +0x055C=0x0000 +0x0514=0x0000 +0x050A=0x0000 +0x050C=0x0000 +0x050B=0x0000 +0x04E7=0x0000 +0x04E6=0x0000 +0x04E5=0x0000 +0x0512=0x0000 +0x0206=0x0000 +0x0550=0x0000 +0x0360=0x0000 +0x030E=0x0000 +0x0203=0x0000 +0x0482=0x0000 +0x0541=0x0000 +0x0122=0x033F +0x0110=0x0BF4 +0x0204=0x0000 +0x0252=0x0000 +0x011E=0x06EC +0x049B=0x0000 +0x0294=0x0000 +0x011C=0xAD41 +0x02D6=0x0000 +0x0311=0x0000 +0x0117=0x280C +0x02A4=0x0000 +0x0540=0x0000 +0x02E0=0x0000 +0x0118=0x018C +0x0489=0x0000 +0x04A7=0x0000 +0x0101=0x7800 +0x0558=0x0000 +0x02C6=0x0000 +0x05A1=0x0000 +0x02C9=0x0000 +0x039D=0x0000 +0x0500=0x0000 +0x0450=0x0000 +0x011F=0x3680 +0x030C=0x0000 +0x04DF=0x0000 +0x0281=0x0000 +0x0106=0x3182 +0x028E=0x0000 +0x0326=0x0000 +0x0113=0x03C3 +0x04CB=0x0000 +0x0391=0x0000 +0x0105=0x0007 +0x02D9=0x0000 +0x02CE=0x0000 +0x038B=0x0000 +0x044F=0x0000 +0x02D4=0x0000 +0x0107=0x318C +0x0495=0x0000 +0x0246=0x0000 +0x0303=0x0000 +0x02E6=0x0000 +0x045B=0x0000 +0x0100=0x3409 +0x0340=0x0000 +0x0208=0x0170 +0x0111=0x0083 +0x0247=0x0000 +0x024B=0x0000 +0x045C=0x0000 +0x0383=0x0000 +0x0202=0x07FF +0x054A=0x0000 +0x0401=0x07FF +0x0341=0x0000 +0x0287=0x0000 +0x034C=0x0000 +0x0501=0x0000 +0x030F=0x0000 +0x025D=0x0000 +0x0406=0x0000 +0x0313=0x0000 +0x010A=0x104C +0x0461=0x0000 +0x051B=0x0000 +0x0121=0x348C +0x0115=0x0009 +0x0112=0xC0E6 +0x039A=0x0000 +0x02CC=0x0000 +0x0116=0x8180 +0x04A0=0x0000 +0x0108=0x3042 +0x020B=0x4000 +0x0251=0x0000 +0x0488=0x0000 +0x0241=0x0000 +0x038F=0x0000 +0x02DC=0x0000 +0x024C=0x0000 +0x0494=0x0000 +0x051D=0x0000 +0x0243=0x0000 +0x0556=0x0000 +0x040A=0x0000 +0x04CD=0x0000 +0x0249=0x0000 +0x0261=0x0000 +0x024A=0x0000 +0x0285=0x0000 +0x0280=0x0000 +0x0346=0x0000 +0x024E=0x0000 +0x0253=0x0000 +0x028B=0x0000 +0x040C=0x00FC +0x0255=0x0000 +0x0258=0x0000 +0x0502=0x0000 +0x05A3=0x0000 +0x0367=0x0000 +0x0240=0x0020 +0x0256=0x0000 +0x025A=0x0000 +0x04E2=0x0000 +0x04C5=0x0000 +0x025B=0x0000 +0x0205=0x0000 +0x0361=0x0000 +0x0515=0x0000 +0x025C=0x0000 +0x0355=0x0000 +0x044C=0x0000 +0x010C=0x8865 +0x0284=0x0000 +0x0396=0x0000 +0x0363=0x0000 +0x031A=0x0000 +0x0289=0x0000 +0x028A=0x0000 +0x04DD=0x0000 +0x059C=0x0000 +0x0352=0x0000 +0x028C=0x0000 +0x04C2=0x0000 +0x04DA=0x0000 +0x025E=0x0000 +0x0327=0x0000 +0x0380=0x0000 +0x0342=0x0000 +0x0343=0x0000 +0x0344=0x0000 +0x0561=0x0000 +0x035A=0x0000 +0x02C8=0x0000 +0x0484=0x0000 +0x0586=0x0000 +0x0597=0x0000 +0x035F=0x0000 +0x0345=0x0000 +0x0505=0x0000 +0x035B=0x0000 +0x034A=0x0000 +0x0455=0x0000 +0x011A=0x2E02 +0x034B=0x0000 +0x034D=0x0000 +0x035C=0x0000 +0x034E=0x0000 +0x0293=0x0000 +0x03A6=0x0000 +0x0350=0x0000 +0x0445=0x0000 +0x048F=0x0000 +0x0351=0x0000 +0x0353=0x0000 +0x050D=0x0000 +0x02CD=0x0000 +0x0490=0x0000 +0x0498=0x0000 +0x0348=0x0000 +0x0356=0x0000 +0x030D=0x0000 +0x0316=0x0000 +0x040E=0x0000 +0x04A3=0x0000 +0x029D=0x0000 +0x0359=0x0000 +0x0299=0x0000 +0x0452=0x0000 +0x0442=0x0000 +0x035D=0x0000 +0x035E=0x0000 +0x0325=0x0000 +0x0364=0x0000 +0x0365=0x0000 +0x0366=0x0000 +0x0381=0x0000 +0x0288=0x0000 +0x0382=0x0000 +0x0384=0x0000 +0x0315=0x0000 +0x0385=0x0000 +0x04E3=0x0000 +0x040F=0x0000 +0x0389=0x0000 +0x054F=0x0000 +0x0386=0x0000 +0x02D0=0x0000 +0x054E=0x0000 +0x03A0=0x0000 +[reference_clocks] +sxt_ref_clk_mhz=30.72 +sxr_ref_clk_mhz=30.72 From c9780626edb32606c2958d51bbd8bcf91d369497 Mon Sep 17 00:00:00 2001 From: kaltenbe Date: Tue, 26 Jan 2016 14:09:47 +0100 Subject: [PATCH 08/55] further RF configuration for SoDeRa --- .../ARCH/SODERA/USERSPACE/LIB/sodera_lib.cpp | 69 ++++++++++++++++--- 1 file changed, 60 insertions(+), 9 deletions(-) diff --git a/targets/ARCH/SODERA/USERSPACE/LIB/sodera_lib.cpp b/targets/ARCH/SODERA/USERSPACE/LIB/sodera_lib.cpp index ddd608d0a1..0ddc3ef4a9 100644 --- a/targets/ARCH/SODERA/USERSPACE/LIB/sodera_lib.cpp +++ b/targets/ARCH/SODERA/USERSPACE/LIB/sodera_lib.cpp @@ -354,7 +354,7 @@ int openair0_dev_init_sodera(openair0_device* device, openair0_config_t *openair printf("Configuring LMS7002\n"); - + int bw_gain_adjust=0; @@ -404,14 +404,65 @@ int openair0_dev_init_sodera(openair0_device* device, openair0_config_t *openair printf("Failed to load configuration file %s\n",openair0_cfg[0].configFilename); exit(-1); } - /* - for(i=0;iusrp->set_rx_rate(openair0_cfg[0].sample_rate,i); - s->usrp->set_rx_bandwidth(openair0_cfg[0].rx_bw,i); - printf("Setting rx freq/gain on channel %lu/%lu : BW %f (readback %f)\n",i,s->usrp->get_rx_num_channels(),openair0_cfg[0].rx_bw/1e6,s->usrp->get_rx_bandwidth(i)/1e6); - s->usrp->set_rx_freq(openair0_cfg[0].rx_freq[i],i); - set_rx_gain_offset(&openair0_cfg[0],i,bw_gain_adjust); + opStatus = lmsControl.UploadAll(); + if (opStatus != LIBLMS7_SUCCESS) { + printf("Failed to upload configuration file\n"); + exit(-1); + } + + opStatus = lmsControl.SetFrequencySX(LMS7002M::Tx, openair0_cfg[0].tx_freq[0]/1e6,30.72); + + if (opStatus != LIBLMS7_SUCCESS) { + printf("Cannot set TX frequency %f MHz\n",openair0_cfg[0].tx_freq[0]/1e6); + exit(-1); + } + + opStatus = lmsControl.SetFrequencySX(LMS7002M::Rx, openair0_cfg[0].rx_freq[0]/1e6,30.72); + + if (opStatus != LIBLMS7_SUCCESS) { + printf("Cannot set RX frequency %f MHz\n",openair0_cfg[0].rx_freq[0]/1e6); + exit(-1); + } + + + + // this makes RX/TX sampling rates equal + opStatus = lmsControl.Modify_SPI_Reg_bits(EN_ADCCLKH_CLKGN,0); + if (opStatus != LIBLMS7_SUCCESS) { + printf("Cannot modify SPI (EN_ADCCLKH_CLKGN)\n"); + exit(-1); + } + opStatus = lmsControl.Modify_SPI_Reg_bits(CLKH_OV_CLKL_CGEN,2); + if (opStatus != LIBLMS7_SUCCESS) { + printf("Cannot modify SPI (CLKH_OV_CLKL_CGEN)\n"); + exit(-1); + } + + const float cgen_freq_MHz = 245.76; + const int interpolation = 0; // real interpolation = 2 + const int decimation = 0; // real decimation = 2 + opStatus = lmsControl.SetInterfaceFrequency(cgen_freq_MHz,interpolation,decimation); + if (opStatus != LIBLMS7_SUCCESS) { + printf("Cannot SetInterfaceFrequency (%f,%d,%d)\n",cgen_freq_MHz,interpolation,decimation); + exit(-1); + } + // Run calibration procedure + float txrx_calibrationBandwidth_MHz = 5; + opStatus = lmsControl.CalibrateTx(txrx_calibrationBandwidth_MHz); + if (opStatus != LIBLMS7_SUCCESS){ + printf("TX Calibration failed\n"); + exit(-1); + } + opStatus = lmsControl.CalibrateRx(txrx_calibrationBandwidth_MHz); + if (opStatus != LIBLMS7_SUCCESS){ + printf("RX Calibration failed\n"); + exit(-1); + } + + // this will configure that sampling rate at output of FPGA + // LMS_StreamBoard::ConfigurePLL(&s->Port,openair0_cfg[0].sample_rate,openair0_cfg[0].sample_rate,90); + /* ::uhd::gain_range_t gain_range = s->usrp->get_rx_gain_range(i); // limit to maximum gain if (openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i] > gain_range.stop()) { @@ -482,6 +533,6 @@ int openair0_dev_init_sodera(openair0_device* device, openair0_config_t *openair s->sample_rate = openair0_cfg[0].sample_rate; // TODO: - + exit(-1); return 0; } From 9e28189d9b815a24a05de1998d03b438be1e9a69 Mon Sep 17 00:00:00 2001 From: kaltenbe Date: Wed, 27 Jan 2016 17:20:19 +0100 Subject: [PATCH 09/55] PLL Configuration --- cmake_targets/CMakeLists.txt | 7 +- .../ARCH/SODERA/USERSPACE/LIB/sodera_lib.cpp | 78 +++++++++---------- 2 files changed, 45 insertions(+), 40 deletions(-) diff --git a/cmake_targets/CMakeLists.txt b/cmake_targets/CMakeLists.txt index 84bf183991..a8af214ce1 100644 --- a/cmake_targets/CMakeLists.txt +++ b/cmake_targets/CMakeLists.txt @@ -441,15 +441,20 @@ elseif (${RF_BOARD} STREQUAL "OAI_SODERA") include_directories("${OPENAIR_TARGETS}/ARCH/SODERA/USERSPACE/LIB") include_directories("${OPENAIR_TARGETS}/ARCH/SODERA/USERSPACE/LIB/lms7suite/src/lms7002m") include_directories("${OPENAIR_TARGETS}/ARCH/SODERA/USERSPACE/LIB/lms7suite/src/Si5351C") + include_directories("${OPENAIR_TARGETS}/ARCH/SODERA/USERSPACE/LIB/lms7suite/src/LMS_StreamBoard") set(HW_SOURCE ${HW_SOURCE} ${OPENAIR_TARGETS}/ARCH/SODERA/USERSPACE/LIB/sodera_lib.cpp ) LINK_DIRECTORIES("${OPENAIR_TARGETS}/ARCH/SODERA/USERSPACE/LIB/lms7suite/src/lms7002m") LINK_DIRECTORIES("${OPENAIR_TARGETS}/ARCH/SODERA/USERSPACE/LIB/lms7suite/src/Si5351C") + LINK_DIRECTORIES("${OPENAIR_TARGETS}/ARCH/SODERA/USERSPACE/LIB/lms7suite/src/LMS_StreamBoard") + LINK_DIRECTORIES("${OPENAIR_TARGETS}/ARCH/SODERA/USERSPACE/LIB/lms7suite/src/kissFFT") LINK_DIRECTORIES("/usr/lib/x86_64-linux-gnu") set(option_HW_lib "usb-1.0") set(LMS7002_LIB "libLMS7002M.a") set(Si5351C_LIB "libSi5351C.a") + set(LMSStreamBoard_LIB "libLMS_StreamBoard.a") + set(KISSFFT_LIB "libkissFFT.a") #set(LOWLATENCY False) elseif (${RF_BOARD} STREQUAL "ETHERNET") @@ -1449,7 +1454,7 @@ add_executable(lte-softmodem target_link_libraries (lte-softmodem -Wl,--start-group - RRC_LIB S1AP_LIB S1AP_ENB GTPV1U SECU_CN SECU_OSA UTIL HASHTABLE SCTP_CLIENT UDP SCHED_LIB PHY LFDS L2 ${MSC_LIB} ${RAL_LIB} ${NAS_UE_LIB} ${ITTI_LIB} ${MIH_LIB} ${LMS7002_LIB} ${Si5351C_LIB} + RRC_LIB S1AP_LIB S1AP_ENB GTPV1U SECU_CN SECU_OSA UTIL HASHTABLE SCTP_CLIENT UDP SCHED_LIB PHY LFDS L2 ${MSC_LIB} ${RAL_LIB} ${NAS_UE_LIB} ${ITTI_LIB} ${MIH_LIB} ${LMS7002_LIB} ${Si5351C_LIB} ${LMSStreamBoard_LIB} ${KISSFFT_LIB} -Wl,--end-group ) diff --git a/targets/ARCH/SODERA/USERSPACE/LIB/sodera_lib.cpp b/targets/ARCH/SODERA/USERSPACE/LIB/sodera_lib.cpp index 0ddc3ef4a9..5914ff5be6 100644 --- a/targets/ARCH/SODERA/USERSPACE/LIB/sodera_lib.cpp +++ b/targets/ARCH/SODERA/USERSPACE/LIB/sodera_lib.cpp @@ -52,6 +52,8 @@ #include "lmsComms.h" #include "LMS7002M.h" #include "Si5351C.h" +#include "LMS_StreamBoard.h" + #ifdef __SSE4_1__ # include #endif @@ -72,24 +74,12 @@ typedef struct // -------------------------------- // variables for SoDeRa configuration // -------------------------------- - /* - uhd::usrp::multi_usrp::sptr usrp; - //uhd::usrp::multi_usrp::sptr rx_usrp; - - //create a send streamer and a receive streamer - uhd::tx_streamer::sptr tx_stream; - uhd::rx_streamer::sptr rx_stream; - - uhd::tx_metadata_t tx_md; - uhd::rx_metadata_t rx_md; - - uhd::time_spec_t tm_spec; - //setup variables and allocate buffer - uhd::async_metadata_t async_md; - */ LMScomms Port; Si5351C Si; + LMS7002M lmsControl; + LMS_StreamBoard *lmsStream; + double sample_rate; // time offset between transmiter timestamp and receiver timestamp; double tdiff; @@ -105,13 +95,13 @@ typedef struct int64_t rx_count; openair0_timestamp rx_timestamp; -} sodera_state_t; +} sodera_t; -sodera_state_t sodera_state; +sodera_t sodera_state; static int trx_sodera_start(openair0_device *device) { - sodera_state_t *s = (sodera_state_t*)device->priv; + sodera_t *s = (sodera_t*)device->priv; // init recv and send streaming @@ -124,7 +114,7 @@ static int trx_sodera_start(openair0_device *device) static void trx_sodera_end(openair0_device *device) { - sodera_state_t *s = (sodera_state_t*)device->priv; + sodera_t *s = (sodera_t*)device->priv; @@ -132,7 +122,7 @@ static void trx_sodera_end(openair0_device *device) static int trx_sodera_write(openair0_device *device, openair0_timestamp timestamp, void **buff, int nsamps, int cc, int flags) { - sodera_state_t *s = (sodera_state_t*)device->priv; + sodera_t *s = (sodera_t*)device->priv; if (cc>1) { // s->tx_stream->send(buff_ptrs, nsamps, s->tx_md); @@ -145,7 +135,7 @@ static int trx_sodera_write(openair0_device *device, openair0_timestamp timestam static int trx_sodera_read(openair0_device *device, openair0_timestamp *ptimestamp, void **buff, int nsamps, int cc) { - sodera_state_t *s = (sodera_state_t*)device->priv; + sodera_t *s = (sodera_t*)device->priv; int samples_received=0,i,j; int nsamps2; // aligned to upper 32 or 16 byte boundary #if defined(__x86_64) || defined(__i386__) @@ -193,7 +183,7 @@ static bool is_equal(double a, double b) int trx_sodera_set_freq(openair0_device* device, openair0_config_t *openair0_cfg, int dummy) { - sodera_state_t *s = (sodera_state_t*)device->priv; + sodera_t *s = (sodera_t*)device->priv; // s->usrp->set_tx_freq(openair0_cfg[0].tx_freq[0]); // s->usrp->set_rx_freq(openair0_cfg[0].rx_freq[0]); @@ -204,7 +194,7 @@ int trx_sodera_set_freq(openair0_device* device, openair0_config_t *openair0_cfg int openair0_set_rx_frequencies(openair0_device* device, openair0_config_t *openair0_cfg) { - sodera_state_t *s = (sodera_state_t*)device->priv; + sodera_t *s = (sodera_t*)device->priv; static int first_call=1; static double rf_freq,diff; @@ -222,7 +212,7 @@ int openair0_set_rx_frequencies(openair0_device* device, openair0_config_t *open int trx_sodera_set_gains(openair0_device* device, openair0_config_t *openair0_cfg) { - sodera_state_t *s = (sodera_state_t*)device->priv; + sodera_t *s = (sodera_t*)device->priv; // s->usrp->set_tx_gain(openair0_cfg[0].tx_gain[0]); // ::uhd::gain_range_t gain_range = s->usrp->get_rx_gain_range(0); @@ -313,7 +303,7 @@ int trx_sodera_reset_stats(openair0_device* device) { int openair0_dev_init_sodera(openair0_device* device, openair0_config_t *openair0_cfg) { - sodera_state_t *s=&sodera_state; + sodera_t *s=&sodera_state; size_t i; @@ -332,8 +322,7 @@ int openair0_dev_init_sodera(openair0_device* device, openair0_config_t *openair (int)devInfo.hardware, (int)devInfo.firmware, (int)devInfo.protocol); - LMS7002M lmsControl(&s->Port); - + printf("Configuring Si5351C\n"); s->Si.Initialize(&s->Port); s->Si.SetPLL(0, 25000000, 0); @@ -396,29 +385,32 @@ int openair0_dev_init_sodera(openair0_device* device, openair0_config_t *openair break; } + + s->lmsControl = LMS7002M(&s->Port); + liblms7_status opStatus; - lmsControl.ResetChip(); - opStatus = lmsControl.LoadConfig(openair0_cfg[0].configFilename); + s->lmsControl.ResetChip(); + opStatus = s->lmsControl.LoadConfig(openair0_cfg[0].configFilename); if (opStatus != LIBLMS7_SUCCESS) { printf("Failed to load configuration file %s\n",openair0_cfg[0].configFilename); exit(-1); } - opStatus = lmsControl.UploadAll(); + opStatus = s->lmsControl.UploadAll(); if (opStatus != LIBLMS7_SUCCESS) { printf("Failed to upload configuration file\n"); exit(-1); } - opStatus = lmsControl.SetFrequencySX(LMS7002M::Tx, openair0_cfg[0].tx_freq[0]/1e6,30.72); + opStatus = s->lmsControl.SetFrequencySX(LMS7002M::Tx, openair0_cfg[0].tx_freq[0]/1e6,30.72); if (opStatus != LIBLMS7_SUCCESS) { printf("Cannot set TX frequency %f MHz\n",openair0_cfg[0].tx_freq[0]/1e6); exit(-1); } - opStatus = lmsControl.SetFrequencySX(LMS7002M::Rx, openair0_cfg[0].rx_freq[0]/1e6,30.72); + opStatus = s->lmsControl.SetFrequencySX(LMS7002M::Rx, openair0_cfg[0].rx_freq[0]/1e6,30.72); if (opStatus != LIBLMS7_SUCCESS) { printf("Cannot set RX frequency %f MHz\n",openair0_cfg[0].rx_freq[0]/1e6); @@ -428,12 +420,12 @@ int openair0_dev_init_sodera(openair0_device* device, openair0_config_t *openair // this makes RX/TX sampling rates equal - opStatus = lmsControl.Modify_SPI_Reg_bits(EN_ADCCLKH_CLKGN,0); + opStatus = s->lmsControl.Modify_SPI_Reg_bits(EN_ADCCLKH_CLKGN,0); if (opStatus != LIBLMS7_SUCCESS) { printf("Cannot modify SPI (EN_ADCCLKH_CLKGN)\n"); exit(-1); } - opStatus = lmsControl.Modify_SPI_Reg_bits(CLKH_OV_CLKL_CGEN,2); + opStatus = s->lmsControl.Modify_SPI_Reg_bits(CLKH_OV_CLKL_CGEN,2); if (opStatus != LIBLMS7_SUCCESS) { printf("Cannot modify SPI (CLKH_OV_CLKL_CGEN)\n"); exit(-1); @@ -442,26 +434,34 @@ int openair0_dev_init_sodera(openair0_device* device, openair0_config_t *openair const float cgen_freq_MHz = 245.76; const int interpolation = 0; // real interpolation = 2 const int decimation = 0; // real decimation = 2 - opStatus = lmsControl.SetInterfaceFrequency(cgen_freq_MHz,interpolation,decimation); + opStatus = s->lmsControl.SetInterfaceFrequency(cgen_freq_MHz,interpolation,decimation); if (opStatus != LIBLMS7_SUCCESS) { printf("Cannot SetInterfaceFrequency (%f,%d,%d)\n",cgen_freq_MHz,interpolation,decimation); exit(-1); } // Run calibration procedure float txrx_calibrationBandwidth_MHz = 5; - opStatus = lmsControl.CalibrateTx(txrx_calibrationBandwidth_MHz); + opStatus = s->lmsControl.CalibrateTx(txrx_calibrationBandwidth_MHz); if (opStatus != LIBLMS7_SUCCESS){ printf("TX Calibration failed\n"); exit(-1); } - opStatus = lmsControl.CalibrateRx(txrx_calibrationBandwidth_MHz); + opStatus = s->lmsControl.CalibrateRx(txrx_calibrationBandwidth_MHz); if (opStatus != LIBLMS7_SUCCESS){ printf("RX Calibration failed\n"); exit(-1); } - + + + s->lmsStream = new LMS_StreamBoard(&s->Port); + LMS_StreamBoard::Status opStreamStatus; // this will configure that sampling rate at output of FPGA - // LMS_StreamBoard::ConfigurePLL(&s->Port,openair0_cfg[0].sample_rate,openair0_cfg[0].sample_rate,90); + opStreamStatus = s->lmsStream->ConfigurePLL(&s->Port,openair0_cfg[0].sample_rate,openair0_cfg[0].sample_rate,90); + if (opStatus != LIBLMS7_SUCCESS){ + printf("Sample rate programming failed\n"); + exit(-1); + } + /* ::uhd::gain_range_t gain_range = s->usrp->get_rx_gain_range(i); // limit to maximum gain From 9d4f383421836dff5bc62acc47dd240bfa623485 Mon Sep 17 00:00:00 2001 From: kaltenbe Date: Thu, 28 Jan 2016 20:21:38 +0100 Subject: [PATCH 10/55] first integration. doesn't compile. --- .../ARCH/SODERA/USERSPACE/LIB/sodera_lib.cpp | 212 +++++++++++++++--- 1 file changed, 186 insertions(+), 26 deletions(-) diff --git a/targets/ARCH/SODERA/USERSPACE/LIB/sodera_lib.cpp b/targets/ARCH/SODERA/USERSPACE/LIB/sodera_lib.cpp index 5914ff5be6..e5b9107251 100644 --- a/targets/ARCH/SODERA/USERSPACE/LIB/sodera_lib.cpp +++ b/targets/ARCH/SODERA/USERSPACE/LIB/sodera_lib.cpp @@ -68,6 +68,8 @@ int num_devices=0; /*These items configure the underlying asynch stream used by the the sync interface. */ +#define BUFFERSIZE 65536 +#define BUFFERSCOUNT 16 // must be a power of 2 typedef struct { @@ -80,10 +82,16 @@ typedef struct LMS7002M lmsControl; LMS_StreamBoard *lmsStream; + uint8_t buffers_rx[BUFFERSIZE*BUFFERSCOUNT]; + int handles[BUFFERSCOUNT]; + int last_handle; + int samples_left_buffer; + double sample_rate; // time offset between transmiter timestamp and receiver timestamp; double tdiff; + int channelscount; // -------------------------------- // Debug and output control // -------------------------------- @@ -97,17 +105,86 @@ typedef struct } sodera_t; +typedef struct { + uint8_t reserved[8]; + uint64_t counter; + uint8_t data[4080]; +} StreamPacket_t; + sodera_t sodera_state; +enum STATUS { + SUCCESS, + FAILURE +}; + +STATUS SPI_write(LMScomms* dataPort, uint16_t address, uint16_t data) +{ + assert(dataPort != nullptr); + LMScomms::GenericPacket ctrPkt; + ctrPkt.cmd = CMD_BRDSPI_WR; + ctrPkt.outBuffer.push_back((address >> 8) & 0xFF); + ctrPkt.outBuffer.push_back(address & 0xFF); + ctrPkt.outBuffer.push_back((data >> 8) & 0xFF); + ctrPkt.outBuffer.push_back(data & 0xFF); + dataPort->TransferPacket(ctrPkt); + return ctrPkt.status == 1 ? SUCCESS : FAILURE; +} + +uint16_t SPI_read(LMScomms* dataPort, uint16_t address) +{ + assert(dataPort != nullptr); + LMScomms::GenericPacket ctrPkt; + ctrPkt.cmd = CMD_BRDSPI_RD; + ctrPkt.outBuffer.push_back((address >> 8) & 0xFF); + ctrPkt.outBuffer.push_back(address & 0xFF); + dataPort->TransferPacket(ctrPkt); + if (ctrPkt.inBuffer.size() > 4) + return ctrPkt.inBuffer[2] * 256 + ctrPkt.inBuffer[3]; + else + return 0; +} + static int trx_sodera_start(openair0_device *device) { sodera_t *s = (sodera_t*)device->priv; + const int buffersCountMask = buffersCount-1; + // init recv and send streaming s->rx_count = 0; s->tx_count = 0; s->rx_timestamp = 0; + s->current_handle = 0; + + // switch off RX + uint16_t regVal = SPI_read(s->Port,0x0005); + SPI_write(s->port,0x0005,regVal & ~0x6); + + if (s->channelscount==2) { + SPI_write(s->Port,0x0001,0x0003); + SPI_write(s->Port,0x0007,0x000A); + } + else { + SPI_write(s->Port,0x0001,0x0001); + SPI_write(s->Port,0x0007,0x0008); + } + + // USB FIFO reset + LMScomms::GenericPacket ctrPkt; + ctrPkt.cmd = CMD_USR_FIFO_RST; + ctrPkt.outBuffer.push_back(0x01); + s->Port.TransferPacket(ctrPkt); + ctrPkt.outBuffer[0]=0x00; + s->Port.TransferPacket(ctrPkt); + + uint16_t regVal = SPI_read(s->Port,0x0005); + // provide timestamp, set streamTXEN, set TX/RX enable + SPI_write(s->port,0x0005,(regVal & ~0x20) | 0x6); + + for (int i=0; i< BUFFERSCOUNT ; i++) + s->handles[i] = s->Port.BeginDataReading(&s->buffers[i*BUFFERSIZE],BUFFERSIZE); return 0; } @@ -117,7 +194,10 @@ static void trx_sodera_end(openair0_device *device) sodera_t *s = (sodera_t*)device->priv; - + // stop TX/RX if they were active + regVal = SPI_read(s->Port,0x0005); + SPI_write(s->Port,0x0005,regVal & ~0x6); + } static int trx_sodera_write(openair0_device *device, openair0_timestamp timestamp, void **buff, int nsamps, int cc, int flags) @@ -138,36 +218,114 @@ static int trx_sodera_read(openair0_device *device, openair0_timestamp *ptimesta sodera_t *s = (sodera_t*)device->priv; int samples_received=0,i,j; int nsamps2; // aligned to upper 32 or 16 byte boundary -#if defined(__x86_64) || defined(__i386__) -#ifdef __AVX2__ - __m256i buff_tmp[2][nsamps>>3]; - nsamps2 = (nsamps+7)>>3; -#else - __m128i buff_tmp[2][nsamps>>2]; - nsamps2 = (nsamps+3)>>2; -#endif -#elif defined(__arm__) - int16x8_t buff_tmp[2][nsamps>>2]; - nsamps2 = (nsamps+3)>>2; -#endif + StreamPacket_t *p; + int16_t sampleI,sampleQ; + uint8_t *pktStart; + int offset = 0; + int num_p; + int ind=0; - - if (cc>1) { - // receive multiple channels (e.g. RF A and RF B) - - } else { - // receive a single channel (e.g. from connector RF A) - - } + // this assumes that each request is of size 4096 bytes (spp = 4080/4/channelscount) - if (samples_received < nsamps) { - printf("[recv] received %d samples out of %d\n",samples_received,nsamps); + // first get rid of remaining samples + if (s->samples_left_buffer > 0) { + buffsize = min(s->samples_left_buffer,nsamps); + pktStart = &s->buffers_rx[(s->last_handle-1)*BUFFERSIZE].data; + pktStart -= (spp-s->samples_left_buffer); + const int stepSize = s->channelscount * 3; + + for (int b=0;bchannelscount;ch++) { + // I sample + sampleI = (pktStart[b + 1 + 3*ch]&0x0F)<<8; + sampleI |= (pktStart[b + 3*ch]&0xFF); + sampleI = (sampleI<<4)>>4; + // Q sample + sampleQ = (pktStart[b + 2 + 3*ch]&0x0F)<<8; + sampleQ |= (pktStart[b + 1 + 3*ch]&0xFF); + sampleQ = (sampleQ<<4)>>4; + ((uint32_t*)buff[ch])[ind] = ((uint32_t)sampleI) | (((uint32_t)sampleQ)<<16); + } + ind++; + } + } + if (ind == nsamps) { + s->samples_left_buffer -= nsamps; + s->rx_count += nsamps; + s->rx_timestamp += s->last_transfer; + *ptimestamp = s->rx_timestamp; + s->last_transfer = nsamps; + + return(nsamps); + } + else { + s->samples_left_buffer = 0; + nsamps -= ind; + samples_received = ind; + } + + // This is for the left-over part => READ from USB + + + spp = sizeof(p->data)>>2; // spp = size of payload in samples + spp /= s->channelscount; + + num_p = nsamps / spp; + if ((nsamps%spp) > 0) + num_p++; + s->samples_left_buffer = (num_p*spp)-nsamps; + for (int i=0;ihandles[i] = s->Port.BeginDataReading(&buffers_rx[i*BUFFERSIZE],BUFFERSIZE); + s->last_handle = num_p; + + + const int stepSize = s->channelscount * 3; + + for (i=0;iPort.WaitForReading(s->handles[i],1000) == false) { + printf("[recv] Error: request %d samples (%d/%d) WaitForReading timed out\n",nsamps,i,num_p); + return(samples_received); + } + if ((ret=Port.FinishDataReading(&s->buffers_rx[i*BUFFERSIZE],BUFFERSIZE,s->handles[i])) != BUFFERSIZE) { + printf("[recv] Error: request %d samples (%d/%d) WaitForReading timed out\n",nsamps,i,num_p); + return(samples_received); + } - } + p = (StreamPacket_t*)&s->buffers_rx[i*BUFFERSIZE]; + // handle timestamp + if ((i==0) & (ind==0)) { // grab the timestamp from HW + s->rx_timestamp = p->counter; + } + else { // check the timestamp + if (i==0) { + if ((s->rx_timestamp + ind) != p->counter) { + printf("Error, RX timestamp error, got %llu, should be %llu\n",p->counter,s->rx_timestamp+ind); + return(ind); + } + } + } + pktStart = &p->data; + for (uint16_t b=0;bdata);n+=stepSize) { + for (int ch=0;ch < s->channelscount;ch++) { + // I sample + sampleI = (pktStart[b + 1 + 3*ch]&0x0F)<<8; + sampleI |= (pktStart[b + 3*ch]&0xFF); + sampleI = (sampleI<<4)>>4; + // Q sample + sampleQ = (pktStart[b + 2 + 3*ch]&0x0F)<<8; + sampleQ |= (pktStart[b + 1 + 3*ch]&0xFF); + sampleQ = (sampleQ<<4)>>4; + ((uint32_t*)buff[ch])[ind] = ((uint32_t)sampleI) | (((uint32_t)sampleQ)<<16); + } + ind++; + } + samples_received+=spp; + } //handle the error code - s->rx_count += nsamps; + s->rx_count += samples_received; // s->rx_timestamp = s->rx_md.time_spec.to_ticks(s->sample_rate); *ptimestamp = s->rx_timestamp; @@ -531,7 +689,9 @@ int openair0_dev_init_sodera(openair0_device* device, openair0_config_t *openair device->trx_set_freq_func = trx_sodera_set_freq; device->trx_set_gains_func = trx_sodera_set_gains; - s->sample_rate = openair0_cfg[0].sample_rate; + s->sample_rate = openair0_cfg[0].sample_rate; + s->channelscount = openair0_cfg[0].rx_num_channels; + // TODO: exit(-1); return 0; From ec96a43dc35b7cdaaf3251b45d223145ebfa4b1a Mon Sep 17 00:00:00 2001 From: Raymond Knopp Date: Thu, 28 Jan 2016 23:24:17 -0800 Subject: [PATCH 11/55] integration, compiles now. --- .../ARCH/SODERA/USERSPACE/LIB/sodera_lib.cpp | 68 +++++++++---------- 1 file changed, 34 insertions(+), 34 deletions(-) diff --git a/targets/ARCH/SODERA/USERSPACE/LIB/sodera_lib.cpp b/targets/ARCH/SODERA/USERSPACE/LIB/sodera_lib.cpp index e5b9107251..85dd0a6032 100644 --- a/targets/ARCH/SODERA/USERSPACE/LIB/sodera_lib.cpp +++ b/targets/ARCH/SODERA/USERSPACE/LIB/sodera_lib.cpp @@ -68,8 +68,8 @@ int num_devices=0; /*These items configure the underlying asynch stream used by the the sync interface. */ -#define BUFFERSIZE 65536 -#define BUFFERSCOUNT 16 // must be a power of 2 +#define BUFFERSIZE 4096 +#define BUFFERSCOUNT 32 typedef struct { @@ -82,10 +82,11 @@ typedef struct LMS7002M lmsControl; LMS_StreamBoard *lmsStream; - uint8_t buffers_rx[BUFFERSIZE*BUFFERSCOUNT]; + char buffers_rx[BUFFERSIZE*BUFFERSCOUNT]; int handles[BUFFERSCOUNT]; - int last_handle; + int current_handle; int samples_left_buffer; + int last_transfer; double sample_rate; // time offset between transmiter timestamp and receiver timestamp; @@ -108,7 +109,7 @@ typedef struct typedef struct { uint8_t reserved[8]; uint64_t counter; - uint8_t data[4080]; + char data[4080]; } StreamPacket_t; sodera_t sodera_state; @@ -149,7 +150,6 @@ static int trx_sodera_start(openair0_device *device) { sodera_t *s = (sodera_t*)device->priv; - const int buffersCountMask = buffersCount-1; // init recv and send streaming @@ -157,34 +157,35 @@ static int trx_sodera_start(openair0_device *device) s->tx_count = 0; s->rx_timestamp = 0; s->current_handle = 0; + s->last_transfer = 0; // switch off RX - uint16_t regVal = SPI_read(s->Port,0x0005); - SPI_write(s->port,0x0005,regVal & ~0x6); + uint16_t regVal = SPI_read(&s->Port,0x0005); + SPI_write(&s->Port,0x0005,regVal & ~0x6); if (s->channelscount==2) { - SPI_write(s->Port,0x0001,0x0003); - SPI_write(s->Port,0x0007,0x000A); + SPI_write(&s->Port,0x0001,0x0003); + SPI_write(&s->Port,0x0007,0x000A); } else { - SPI_write(s->Port,0x0001,0x0001); - SPI_write(s->Port,0x0007,0x0008); + SPI_write(&s->Port,0x0001,0x0001); + SPI_write(&s->Port,0x0007,0x0008); } // USB FIFO reset LMScomms::GenericPacket ctrPkt; - ctrPkt.cmd = CMD_USR_FIFO_RST; + ctrPkt.cmd = CMD_USB_FIFO_RST; ctrPkt.outBuffer.push_back(0x01); s->Port.TransferPacket(ctrPkt); ctrPkt.outBuffer[0]=0x00; s->Port.TransferPacket(ctrPkt); - uint16_t regVal = SPI_read(s->Port,0x0005); + regVal = SPI_read(&s->Port,0x0005); // provide timestamp, set streamTXEN, set TX/RX enable - SPI_write(s->port,0x0005,(regVal & ~0x20) | 0x6); + SPI_write(&s->Port,0x0005,(regVal & ~0x20) | 0x6); for (int i=0; i< BUFFERSCOUNT ; i++) - s->handles[i] = s->Port.BeginDataReading(&s->buffers[i*BUFFERSIZE],BUFFERSIZE); + s->handles[i] = s->Port.BeginDataReading(&s->buffers_rx[i*BUFFERSIZE],BUFFERSIZE); return 0; } @@ -195,8 +196,8 @@ static void trx_sodera_end(openair0_device *device) // stop TX/RX if they were active - regVal = SPI_read(s->Port,0x0005); - SPI_write(s->Port,0x0005,regVal & ~0x6); + uint16_t regVal = SPI_read(&s->Port,0x0005); + SPI_write(&s->Port,0x0005,regVal & ~0x6); } @@ -204,11 +205,6 @@ static int trx_sodera_write(openair0_device *device, openair0_timestamp timestam { sodera_t *s = (sodera_t*)device->priv; - if (cc>1) { - // s->tx_stream->send(buff_ptrs, nsamps, s->tx_md); - } - else - // s->tx_stream->send(buff[0], nsamps, s->tx_md); return 0; } @@ -220,18 +216,23 @@ static int trx_sodera_read(openair0_device *device, openair0_timestamp *ptimesta int nsamps2; // aligned to upper 32 or 16 byte boundary StreamPacket_t *p; int16_t sampleI,sampleQ; - uint8_t *pktStart; + char *pktStart; int offset = 0; int num_p; int ind=0; + int buffsize; + int spp; // this assumes that each request is of size 4096 bytes (spp = 4080/4/channelscount) - + spp = sizeof(p->data)>>2; // spp = size of payload in samples + spp /= s->channelscount; + + // first get rid of remaining samples if (s->samples_left_buffer > 0) { buffsize = min(s->samples_left_buffer,nsamps); - pktStart = &s->buffers_rx[(s->last_handle-1)*BUFFERSIZE].data; - pktStart -= (spp-s->samples_left_buffer); + pktStart = ((StreamPacket_t*)&s->buffers_rx[(s->current_handle-1)*BUFFERSIZE])->data; + pktStart += (spp-s->samples_left_buffer); const int stepSize = s->channelscount * 3; for (int b=0;b READ from USB - spp = sizeof(p->data)>>2; // spp = size of payload in samples - spp /= s->channelscount; num_p = nsamps / spp; if ((nsamps%spp) > 0) num_p++; s->samples_left_buffer = (num_p*spp)-nsamps; for (int i=0;ihandles[i] = s->Port.BeginDataReading(&buffers_rx[i*BUFFERSIZE],BUFFERSIZE); - s->last_handle = num_p; + s->handles[i] = s->Port.BeginDataReading(&s->buffers_rx[i*BUFFERSIZE],BUFFERSIZE); + s->current_handle = num_p; const int stepSize = s->channelscount * 3; @@ -287,7 +286,8 @@ static int trx_sodera_read(openair0_device *device, openair0_timestamp *ptimesta printf("[recv] Error: request %d samples (%d/%d) WaitForReading timed out\n",nsamps,i,num_p); return(samples_received); } - if ((ret=Port.FinishDataReading(&s->buffers_rx[i*BUFFERSIZE],BUFFERSIZE,s->handles[i])) != BUFFERSIZE) { + long bytesToRead=BUFFERSIZE; + if (s->Port.FinishDataReading(&s->buffers_rx[i*BUFFERSIZE],bytesToRead,s->handles[i]) != BUFFERSIZE) { printf("[recv] Error: request %d samples (%d/%d) WaitForReading timed out\n",nsamps,i,num_p); return(samples_received); } @@ -305,8 +305,8 @@ static int trx_sodera_read(openair0_device *device, openair0_timestamp *ptimesta } } } - pktStart = &p->data; - for (uint16_t b=0;bdata);n+=stepSize) { + pktStart = p->data; + for (uint16_t b=0;bdata);b+=stepSize) { for (int ch=0;ch < s->channelscount;ch++) { // I sample sampleI = (pktStart[b + 1 + 3*ch]&0x0F)<<8; From 2b5f756d47c6ae578f00a1a05ff59b84f5784dda Mon Sep 17 00:00:00 2001 From: kaltenbe Date: Fri, 29 Jan 2016 09:45:28 +0100 Subject: [PATCH 12/55] getting ready for rename --- .../ARCH/SODERA/USERSPACE/LIB/sodera_lib.cpp | 89 +- targets/ARCH/SODERA/lms7_trx_LTE_mimo_RF.ini | 1128 ----------------- targets/ARCH/SODERA/lms7_trx_LTE_mimo_TSG.ini | 1128 ----------------- .../CONF/enb.band7.tm1.50PRB.bladerfx40.conf | 8 +- 4 files changed, 61 insertions(+), 2292 deletions(-) delete mode 100644 targets/ARCH/SODERA/lms7_trx_LTE_mimo_RF.ini delete mode 100644 targets/ARCH/SODERA/lms7_trx_LTE_mimo_TSG.ini diff --git a/targets/ARCH/SODERA/USERSPACE/LIB/sodera_lib.cpp b/targets/ARCH/SODERA/USERSPACE/LIB/sodera_lib.cpp index 85dd0a6032..30a2106b34 100644 --- a/targets/ARCH/SODERA/USERSPACE/LIB/sodera_lib.cpp +++ b/targets/ARCH/SODERA/USERSPACE/LIB/sodera_lib.cpp @@ -86,7 +86,6 @@ typedef struct int handles[BUFFERSCOUNT]; int current_handle; int samples_left_buffer; - int last_transfer; double sample_rate; // time offset between transmiter timestamp and receiver timestamp; @@ -153,16 +152,34 @@ static int trx_sodera_start(openair0_device *device) // init recv and send streaming + printf("Starting LMS Streaming\n"); s->rx_count = 0; s->tx_count = 0; s->rx_timestamp = 0; s->current_handle = 0; - s->last_transfer = 0; // switch off RX uint16_t regVal = SPI_read(&s->Port,0x0005); SPI_write(&s->Port,0x0005,regVal & ~0x6); + + + + + + // USB FIFO reset + LMScomms::GenericPacket ctrPkt; + ctrPkt.cmd = CMD_USB_FIFO_RST; + ctrPkt.outBuffer.push_back(0x01); + s->Port.TransferPacket(ctrPkt); + ctrPkt.outBuffer[0]=0x00; + s->Port.TransferPacket(ctrPkt); + + regVal = SPI_read(&s->Port,0x0005); + // provide timestamp, set streamTXEN, set TX/RX enable + SPI_write(&s->Port,0x0005,(regVal & ~0x20) | 0x6); + + if (s->channelscount==2) { SPI_write(&s->Port,0x0001,0x0003); SPI_write(&s->Port,0x0007,0x000A); @@ -172,21 +189,10 @@ static int trx_sodera_start(openair0_device *device) SPI_write(&s->Port,0x0007,0x0008); } - // USB FIFO reset - LMScomms::GenericPacket ctrPkt; - ctrPkt.cmd = CMD_USB_FIFO_RST; - ctrPkt.outBuffer.push_back(0x01); - s->Port.TransferPacket(ctrPkt); - ctrPkt.outBuffer[0]=0x00; - s->Port.TransferPacket(ctrPkt); - - regVal = SPI_read(&s->Port,0x0005); - // provide timestamp, set streamTXEN, set TX/RX enable - SPI_write(&s->Port,0x0005,(regVal & ~0x20) | 0x6); for (int i=0; i< BUFFERSCOUNT ; i++) s->handles[i] = s->Port.BeginDataReading(&s->buffers_rx[i*BUFFERSIZE],BUFFERSIZE); - + printf("Armed %d transfers\n",BUFFERSCOUNT); return 0; } @@ -209,6 +215,8 @@ static int trx_sodera_write(openair0_device *device, openair0_timestamp timestam return 0; } +#define DEBUG_READ 1 + static int trx_sodera_read(openair0_device *device, openair0_timestamp *ptimestamp, void **buff, int nsamps, int cc) { sodera_t *s = (sodera_t*)device->priv; @@ -222,16 +230,21 @@ static int trx_sodera_read(openair0_device *device, openair0_timestamp *ptimesta int ind=0; int buffsize; int spp; + int bufindex; // this assumes that each request is of size 4096 bytes (spp = 4080/4/channelscount) spp = sizeof(p->data)>>2; // spp = size of payload in samples spp /= s->channelscount; - +#ifdef DEBUG_READ + printf("\nIn trx_read\n"); + printf("s->current_handle %d\n", s->current_handle); + printf("s->samples_left_buffer %d\n",s->samples_left_buffer); +#endif // first get rid of remaining samples if (s->samples_left_buffer > 0) { buffsize = min(s->samples_left_buffer,nsamps); - pktStart = ((StreamPacket_t*)&s->buffers_rx[(s->current_handle-1)*BUFFERSIZE])->data; + pktStart = ((StreamPacket_t*)&s->buffers_rx[s->current_handle*BUFFERSIZE])->data; pktStart += (spp-s->samples_left_buffer); const int stepSize = s->channelscount * 3; @@ -253,10 +266,9 @@ static int trx_sodera_read(openair0_device *device, openair0_timestamp *ptimesta if (ind == nsamps) { s->samples_left_buffer -= nsamps; s->rx_count += nsamps; - s->rx_timestamp += s->last_transfer; *ptimestamp = s->rx_timestamp; - s->last_transfer = nsamps; - + s->rx_timestamp+=nsamps; + return(nsamps); } else { @@ -273,29 +285,38 @@ static int trx_sodera_read(openair0_device *device, openair0_timestamp *ptimesta if ((nsamps%spp) > 0) num_p++; s->samples_left_buffer = (num_p*spp)-nsamps; - for (int i=0;ihandles[i] = s->Port.BeginDataReading(&s->buffers_rx[i*BUFFERSIZE],BUFFERSIZE); - s->current_handle = num_p; - + +#ifdef DEBUG_READ + printf("num_p %d\n",num_p); +#endif const int stepSize = s->channelscount * 3; for (i=0;iPort.WaitForReading(s->handles[i],1000) == false) { - printf("[recv] Error: request %d samples (%d/%d) WaitForReading timed out\n",nsamps,i,num_p); + bufindex = (s->current_handle+i)&(BUFFERSCOUNT-1); + if (s->Port.WaitForReading(s->handles[bufindex],1000) == false) { + printf("[recv] Error: request %d samples (%d/%d) WaitForReading timed out\n",nsamps,bufindex,num_p); + *ptimestamp = s->rx_timestamp; + s->rx_timestamp+=samples_received; return(samples_received); } long bytesToRead=BUFFERSIZE; - if (s->Port.FinishDataReading(&s->buffers_rx[i*BUFFERSIZE],bytesToRead,s->handles[i]) != BUFFERSIZE) { - printf("[recv] Error: request %d samples (%d/%d) WaitForReading timed out\n",nsamps,i,num_p); + if (s->Port.FinishDataReading(&s->buffers_rx[bufindex*BUFFERSIZE],bytesToRead,s->handles[bufindex]) != BUFFERSIZE) { + printf("[recv] Error: request %d samples (%d/%d) WaitForReading timed out\n",nsamps,bufindex,num_p); + *ptimestamp = s->rx_timestamp; + s->rx_timestamp+=samples_received; return(samples_received); } - p = (StreamPacket_t*)&s->buffers_rx[i*BUFFERSIZE]; + p = (StreamPacket_t*)&s->buffers_rx[bufindex*BUFFERSIZE]; // handle timestamp if ((i==0) & (ind==0)) { // grab the timestamp from HW - s->rx_timestamp = p->counter; + *ptimestamp = p->counter; + s->rx_timestamp = p->counter+nsamps; // for next time +#ifdef DEBUG_READ + printf("RX timestamp %d\n",s->rx_timestamp); +#endif } else { // check the timestamp if (i==0) { @@ -304,6 +325,8 @@ static int trx_sodera_read(openair0_device *device, openair0_timestamp *ptimesta return(ind); } } + *ptimestamp = s->rx_timestamp; + s->rx_timestamp+=nsamps; } pktStart = p->data; for (uint16_t b=0;bdata);b+=stepSize) { @@ -321,13 +344,15 @@ static int trx_sodera_read(openair0_device *device, openair0_timestamp *ptimesta ind++; } samples_received+=spp; + // schedule a new transmission for this index + s->handles[bufindex] = s->Port.BeginDataReading(&s->buffers_rx[bufindex*BUFFERSIZE],BUFFERSIZE); + s->current_handle=(s->current_handle+1)&(BUFFERSCOUNT-1); } //handle the error code s->rx_count += samples_received; // s->rx_timestamp = s->rx_md.time_spec.to_ticks(s->sample_rate); - *ptimestamp = s->rx_timestamp; return samples_received; } @@ -597,6 +622,7 @@ int openair0_dev_init_sodera(openair0_device* device, openair0_config_t *openair printf("Cannot SetInterfaceFrequency (%f,%d,%d)\n",cgen_freq_MHz,interpolation,decimation); exit(-1); } + /* // Run calibration procedure float txrx_calibrationBandwidth_MHz = 5; opStatus = s->lmsControl.CalibrateTx(txrx_calibrationBandwidth_MHz); @@ -609,7 +635,7 @@ int openair0_dev_init_sodera(openair0_device* device, openair0_config_t *openair printf("RX Calibration failed\n"); exit(-1); } - + */ s->lmsStream = new LMS_StreamBoard(&s->Port); LMS_StreamBoard::Status opStreamStatus; @@ -693,6 +719,5 @@ int openair0_dev_init_sodera(openair0_device* device, openair0_config_t *openair s->channelscount = openair0_cfg[0].rx_num_channels; // TODO: - exit(-1); return 0; } diff --git a/targets/ARCH/SODERA/lms7_trx_LTE_mimo_RF.ini b/targets/ARCH/SODERA/lms7_trx_LTE_mimo_RF.ini deleted file mode 100644 index e0e313b23e..0000000000 --- a/targets/ARCH/SODERA/lms7_trx_LTE_mimo_RF.ini +++ /dev/null @@ -1,1128 +0,0 @@ -[file_info] -type=lms7002m_minimal_config -version=1 -[lms7002_registers_a] -0x0020=0xFFFD -0x0021=0x0E9F -0x0022=0x07FF -0x0023=0x5550 -0x0024=0xE4E4 -0x0025=0x0101 -0x0026=0x0101 -0x0027=0xB1E4 -0x0028=0x0101 -0x0029=0x0101 -0x002A=0x0086 -0x002B=0x0038 -0x002C=0x0000 -0x002D=0xFFFF -0x002E=0x0000 -0x002F=0x3840 -0x0081=0x0000 -0x0082=0x8001 -0x0084=0x0400 -0x0085=0x0001 -0x0086=0x4101 -0x0087=0xB13B -0x0088=0x0303 -0x0089=0x1078 -0x008A=0x0514 -0x008B=0x2182 -0x008C=0x267B -0x0092=0x0001 -0x0093=0x0000 -0x0094=0x0000 -0x0095=0x0000 -0x0096=0x0000 -0x0097=0x0000 -0x0098=0x0000 -0x0099=0x6565 -0x009A=0x658C -0x009B=0x6565 -0x009C=0x658C -0x009D=0x6565 -0x009E=0x658C -0x009F=0x658C -0x00A0=0x6565 -0x00A1=0x6565 -0x00A2=0x6565 -0x00A3=0x6565 -0x00A4=0x6565 -0x00A5=0x6565 -0x00A6=0x0001 -0x00A7=0x6565 -0x00A8=0x0000 -0x00A9=0x8000 -0x00AA=0x0000 -0x00AB=0x0040 -0x00AC=0x2000 -0x00AD=0x03FF -0x00AE=0x0000 -0x0100=0x7409 -0x0101=0x7800 -0x0102=0x3180 -0x0103=0x0A12 -0x0104=0x0088 -0x0105=0x0007 -0x0106=0x3182 -0x0107=0x318C -0x0108=0x3042 -0x0109=0x61C1 -0x010A=0x104C -0x010C=0x8865 -0x010D=0x019D -0x010E=0x2040 -0x010F=0x3042 -0x0110=0x0BF4 -0x0111=0x0083 -0x0112=0xC0E6 -0x0113=0x03C3 -0x0114=0x008D -0x0115=0x0009 -0x0116=0x8180 -0x0117=0x280C -0x0118=0x018C -0x0119=0x18CB -0x011A=0x2E02 -0x011C=0xA941 -0x011D=0x4EC4 -0x011E=0x048C -0x011F=0x3640 -0x0120=0xB9FF -0x0121=0x3158 -0x0122=0x033F -0x0123=0x267B -0x0124=0x0000 -0x0200=0x0081 -0x0201=0x07B0 -0x0202=0x06F2 -0x0203=0x0FC2 -0x0204=0xD51F -0x0205=0x0000 -0x0206=0x0000 -0x0207=0x0000 -0x0208=0x0170 -0x0209=0x0000 -0x020A=0x0080 -0x020B=0x4000 -0x020C=0x7FFF -0x0240=0x0020 -0x0241=0x0000 -0x0242=0x0000 -0x0243=0x0000 -0x0244=0x0000 -0x0245=0x0000 -0x0246=0x0000 -0x0247=0x0000 -0x0248=0x0000 -0x0249=0x0000 -0x024A=0x0000 -0x024B=0x0000 -0x024C=0x0000 -0x024D=0x0000 -0x024E=0x0000 -0x024F=0x0000 -0x0250=0x0000 -0x0251=0x0000 -0x0252=0x0000 -0x0253=0x0000 -0x0254=0x0000 -0x0255=0x0000 -0x0256=0x0000 -0x0257=0x0000 -0x0258=0x0000 -0x0259=0x0000 -0x025A=0x0000 -0x025B=0x0000 -0x025C=0x0000 -0x025D=0x0000 -0x025E=0x0000 -0x025F=0x0000 -0x0260=0x0000 -0x0261=0x0000 -0x0280=0x0000 -0x0281=0x0000 -0x0282=0x0000 -0x0283=0x0000 -0x0284=0x0000 -0x0285=0x0000 -0x0286=0x0000 -0x0287=0x0000 -0x0288=0x0000 -0x0289=0x0000 -0x028A=0x0000 -0x028B=0x0000 -0x028C=0x0000 -0x028D=0x0000 -0x028E=0x0000 -0x028F=0x0000 -0x0290=0x0000 -0x0291=0x0000 -0x0292=0x0000 -0x0293=0x0000 -0x0294=0x0000 -0x0295=0x0000 -0x0296=0x0000 -0x0297=0x0000 -0x0298=0x0000 -0x0299=0x0000 -0x029A=0x0000 -0x029B=0x0000 -0x029C=0x0000 -0x029D=0x0000 -0x029E=0x0000 -0x029F=0x0000 -0x02A0=0x0000 -0x02A1=0x0000 -0x02A2=0x0000 -0x02A3=0x0000 -0x02A4=0x0000 -0x02A5=0x0000 -0x02A6=0x0000 -0x02A7=0x0000 -0x02C0=0x0000 -0x02C1=0x0000 -0x02C2=0x0000 -0x02C3=0x0000 -0x02C4=0x0000 -0x02C5=0x0000 -0x02C6=0x0000 -0x02C7=0x0000 -0x02C8=0x0000 -0x02C9=0x0000 -0x02CA=0x0000 -0x02CB=0x0000 -0x02CC=0x0000 -0x02CD=0x0000 -0x02CE=0x0000 -0x02CF=0x0000 -0x02D0=0x0000 -0x02D1=0x0000 -0x02D2=0x0000 -0x02D3=0x0000 -0x02D4=0x0000 -0x02D5=0x0000 -0x02D6=0x0000 -0x02D7=0x0000 -0x02D8=0x0000 -0x02D9=0x0000 -0x02DA=0x0000 -0x02DB=0x0000 -0x02DC=0x0000 -0x02DD=0x0000 -0x02DE=0x0000 -0x02DF=0x0000 -0x02E0=0x0000 -0x02E1=0x0000 -0x02E2=0x0000 -0x02E3=0x0000 -0x02E4=0x0000 -0x02E5=0x0000 -0x02E6=0x0000 -0x02E7=0x0000 -0x0300=0x0000 -0x0301=0x0000 -0x0302=0x0000 -0x0303=0x0000 -0x0304=0x0000 -0x0305=0x0000 -0x0306=0x0000 -0x0307=0x0000 -0x0308=0x0000 -0x0309=0x0000 -0x030A=0x0000 -0x030B=0x0000 -0x030C=0x0000 -0x030D=0x0000 -0x030E=0x0000 -0x030F=0x0000 -0x0310=0x0000 -0x0311=0x0000 -0x0312=0x0000 -0x0313=0x0000 -0x0314=0x0000 -0x0315=0x0000 -0x0316=0x0000 -0x0317=0x0000 -0x0318=0x0000 -0x0319=0x0000 -0x031A=0x0000 -0x031B=0x0000 -0x031C=0x0000 -0x031D=0x0000 -0x031E=0x0000 -0x031F=0x0000 -0x0320=0x0000 -0x0321=0x0000 -0x0322=0x0000 -0x0323=0x0000 -0x0324=0x0000 -0x0325=0x0000 -0x0326=0x0000 -0x0327=0x0000 -0x0340=0x0000 -0x0341=0x0000 -0x0342=0x0000 -0x0343=0x0000 -0x0344=0x0000 -0x0345=0x0000 -0x0346=0x0000 -0x0347=0x0000 -0x0348=0x0000 -0x0349=0x0000 -0x034A=0x0000 -0x034B=0x0000 -0x034C=0x0000 -0x034D=0x0000 -0x034E=0x0000 -0x034F=0x0000 -0x0350=0x0000 -0x0351=0x0000 -0x0352=0x0000 -0x0353=0x0000 -0x0354=0x0000 -0x0355=0x0000 -0x0356=0x0000 -0x0357=0x0000 -0x0358=0x0000 -0x0359=0x0000 -0x035A=0x0000 -0x035B=0x0000 -0x035C=0x0000 -0x035D=0x0000 -0x035E=0x0000 -0x035F=0x0000 -0x0360=0x0000 -0x0361=0x0000 -0x0362=0x0000 -0x0363=0x0000 -0x0364=0x0000 -0x0365=0x0000 -0x0366=0x0000 -0x0367=0x0000 -0x0380=0x0000 -0x0381=0x0000 -0x0382=0x0000 -0x0383=0x0000 -0x0384=0x0000 -0x0385=0x0000 -0x0386=0x0000 -0x0387=0x0000 -0x0388=0x0000 -0x0389=0x0000 -0x038A=0x0000 -0x038B=0x0000 -0x038C=0x0000 -0x038D=0x0000 -0x038E=0x0000 -0x038F=0x0000 -0x0390=0x0000 -0x0391=0x0000 -0x0392=0x0000 -0x0393=0x0000 -0x0394=0x0000 -0x0395=0x0000 -0x0396=0x0000 -0x0397=0x0000 -0x0398=0x0000 -0x0399=0x0000 -0x039A=0x0000 -0x039B=0x0000 -0x039C=0x0000 -0x039D=0x0000 -0x039E=0x0000 -0x039F=0x0000 -0x03A0=0x0000 -0x03A1=0x0000 -0x03A2=0x0000 -0x03A3=0x0000 -0x03A4=0x0000 -0x03A5=0x0000 -0x03A6=0x0000 -0x03A7=0x0000 -0x0400=0x0081 -0x0401=0x07FF -0x0402=0x07FF -0x0403=0x0000 -0x0404=0x0000 -0x0405=0x0000 -0x0406=0x0000 -0x0407=0x0000 -0x0408=0x0000 -0x0409=0x0000 -0x040A=0x0003 -0x040B=0x000F -0x040C=0x00FC -0x040D=0x0000 -0x040E=0x0000 -0x040F=0x0000 -0x0440=0x0020 -0x0441=0x0000 -0x0442=0x0563 -0x0443=0xB490 -0x0444=0x02B1 -0x0445=0xDA48 -0x0446=0x0000 -0x0447=0x0000 -0x0448=0x0000 -0x0449=0x0000 -0x044A=0x0000 -0x044B=0x0000 -0x044C=0x0000 -0x044D=0x0000 -0x044E=0x0000 -0x044F=0x0000 -0x0450=0x0000 -0x0451=0x0000 -0x0452=0x0000 -0x0453=0x0000 -0x0454=0x0000 -0x0455=0x0000 -0x0456=0x0000 -0x0457=0x0000 -0x0458=0x0000 -0x0459=0x0000 -0x045A=0x0000 -0x045B=0x0000 -0x045C=0x0000 -0x045D=0x0000 -0x045E=0x0000 -0x045F=0x0000 -0x0460=0x0000 -0x0461=0x0000 -0x0480=0x0000 -0x0481=0x0000 -0x0482=0x0000 -0x0483=0x0000 -0x0484=0x0000 -0x0485=0x0000 -0x0486=0x0000 -0x0487=0x0000 -0x0488=0x0000 -0x0489=0x0000 -0x048A=0x0000 -0x048B=0x0000 -0x048C=0x0000 -0x048D=0x0000 -0x048E=0x0000 -0x048F=0x0000 -0x0490=0x0000 -0x0491=0x0000 -0x0492=0x0000 -0x0493=0x0000 -0x0494=0x0000 -0x0495=0x0000 -0x0496=0x0000 -0x0497=0x0000 -0x0498=0x0000 -0x0499=0x0000 -0x049A=0x0000 -0x049B=0x0000 -0x049C=0x0000 -0x049D=0x0000 -0x049E=0x0000 -0x049F=0x0000 -0x04A0=0x0000 -0x04A1=0x0000 -0x04A2=0x0000 -0x04A3=0x0000 -0x04A4=0x0000 -0x04A5=0x0000 -0x04A6=0x0000 -0x04A7=0x0000 -0x04C0=0x0000 -0x04C1=0x0000 -0x04C2=0x0000 -0x04C3=0x0000 -0x04C4=0x0000 -0x04C5=0x0000 -0x04C6=0x0000 -0x04C7=0x0000 -0x04C8=0x0000 -0x04C9=0x0000 -0x04CA=0x0000 -0x04CB=0x0000 -0x04CC=0x0000 -0x04CD=0x0000 -0x04CE=0x0000 -0x04CF=0x0000 -0x04D0=0x0000 -0x04D1=0x0000 -0x04D2=0x0000 -0x04D3=0x0000 -0x04D4=0x0000 -0x04D5=0x0000 -0x04D6=0x0000 -0x04D7=0x0000 -0x04D8=0x0000 -0x04D9=0x0000 -0x04DA=0x0000 -0x04DB=0x0000 -0x04DC=0x0000 -0x04DD=0x0000 -0x04DE=0x0000 -0x04DF=0x0000 -0x04E0=0x0000 -0x04E1=0x0000 -0x04E2=0x0000 -0x04E3=0x0000 -0x04E4=0x0000 -0x04E5=0x0000 -0x04E6=0x0000 -0x04E7=0x0000 -0x0500=0x0000 -0x0501=0x0000 -0x0502=0x0000 -0x0503=0x0000 -0x0504=0x0000 -0x0505=0x0000 -0x0506=0x0000 -0x0507=0x0000 -0x0508=0x0000 -0x0509=0x0000 -0x050A=0x0000 -0x050B=0x0000 -0x050C=0x0000 -0x050D=0x0000 -0x050E=0x0000 -0x050F=0x0000 -0x0510=0x0000 -0x0511=0x0000 -0x0512=0x0000 -0x0513=0x0000 -0x0514=0x0000 -0x0515=0x0000 -0x0516=0x0000 -0x0517=0x0000 -0x0518=0x0000 -0x0519=0x0000 -0x051A=0x0000 -0x051B=0x0000 -0x051C=0x0000 -0x051D=0x0000 -0x051E=0x0000 -0x051F=0x0000 -0x0520=0x0000 -0x0521=0x0000 -0x0522=0x0000 -0x0523=0x0000 -0x0524=0x0000 -0x0525=0x0000 -0x0526=0x0000 -0x0527=0x0000 -0x0540=0x0000 -0x0541=0x0000 -0x0542=0x0000 -0x0543=0x0000 -0x0544=0x0000 -0x0545=0x0000 -0x0546=0x0000 -0x0547=0x0000 -0x0548=0x0000 -0x0549=0x0000 -0x054A=0x0000 -0x054B=0x0000 -0x054C=0x0000 -0x054D=0x0000 -0x054E=0x0000 -0x054F=0x0000 -0x0550=0x0000 -0x0551=0x0000 -0x0552=0x0000 -0x0553=0x0000 -0x0554=0x0000 -0x0555=0x0000 -0x0556=0x0000 -0x0557=0x0000 -0x0558=0x0000 -0x0559=0x0000 -0x055A=0x0000 -0x055B=0x0000 -0x055C=0x0000 -0x055D=0x0000 -0x055E=0x0000 -0x055F=0x0000 -0x0560=0x0000 -0x0561=0x0000 -0x0562=0x0000 -0x0563=0x0000 -0x0564=0x0000 -0x0565=0x0000 -0x0566=0x0000 -0x0567=0x0000 -0x0580=0x0000 -0x0581=0x0000 -0x0582=0x0000 -0x0583=0x0000 -0x0584=0x0000 -0x0585=0x0000 -0x0586=0x0000 -0x0587=0x0000 -0x0588=0x0000 -0x0589=0x0000 -0x058A=0x0000 -0x058B=0x0000 -0x058C=0x0000 -0x058D=0x0000 -0x058E=0x0000 -0x058F=0x0000 -0x0590=0x0000 -0x0591=0x0000 -0x0592=0x0000 -0x0593=0x0000 -0x0594=0x0000 -0x0595=0x0000 -0x0596=0x0000 -0x0597=0x0000 -0x0598=0x0000 -0x0599=0x0000 -0x059A=0x0000 -0x059B=0x0000 -0x059C=0x0000 -0x059D=0x0000 -0x059E=0x0000 -0x059F=0x0000 -0x05A0=0x0000 -0x05A1=0x0000 -0x05A2=0x0000 -0x05A3=0x0000 -0x05A4=0x0000 -0x05A5=0x0000 -0x05A6=0x0000 -0x05A7=0x0000 -[lms7002_registers_b] -0x0100=0x3409 -0x0101=0x7800 -0x0102=0x3180 -0x0103=0x0A12 -0x0104=0x0088 -0x0105=0x0007 -0x0106=0x3182 -0x0107=0x318C -0x0108=0x3042 -0x0109=0x61C1 -0x010A=0x104C -0x010C=0x8865 -0x010D=0x019C -0x010E=0x2040 -0x010F=0x3042 -0x0110=0x0BF4 -0x0111=0x0083 -0x0112=0xC0E6 -0x0113=0x03C3 -0x0114=0x008D -0x0115=0x0009 -0x0116=0x8180 -0x0117=0x280C -0x0118=0x018C -0x0119=0x18CB -0x011A=0x2E02 -0x011C=0xA941 -0x011D=0x3B13 -0x011E=0x0631 -0x011F=0x3600 -0x0120=0xB9FF -0x0121=0x31DA -0x0122=0x033F -0x0123=0x267B -0x0124=0x0000 -0x0200=0x0101 -0x0201=0x05BD -0x0202=0x0779 -0x0203=0x0F9E -0x0204=0xBCC2 -0x0205=0x0000 -0x0206=0x0000 -0x0207=0x0000 -0x0208=0x0170 -0x0209=0x0000 -0x020A=0x0080 -0x020B=0x4000 -0x020C=0x7FFF -0x0240=0x0020 -0x0241=0x0000 -0x0242=0x0000 -0x0243=0x0000 -0x0244=0x0000 -0x0245=0x0000 -0x0246=0x0000 -0x0247=0x0000 -0x0248=0x0000 -0x0249=0x0000 -0x024A=0x0000 -0x024B=0x0000 -0x024C=0x0000 -0x024D=0x0000 -0x024E=0x0000 -0x024F=0x0000 -0x0250=0x0000 -0x0251=0x0000 -0x0252=0x0000 -0x0253=0x0000 -0x0254=0x0000 -0x0255=0x0000 -0x0256=0x0000 -0x0257=0x0000 -0x0258=0x0000 -0x0259=0x0000 -0x025A=0x0000 -0x025B=0x0000 -0x025C=0x0000 -0x025D=0x0000 -0x025E=0x0000 -0x025F=0x0000 -0x0260=0x0000 -0x0261=0x0000 -0x0280=0x0000 -0x0281=0x0000 -0x0282=0x0000 -0x0283=0x0000 -0x0284=0x0000 -0x0285=0x0000 -0x0286=0x0000 -0x0287=0x0000 -0x0288=0x0000 -0x0289=0x0000 -0x028A=0x0000 -0x028B=0x0000 -0x028C=0x0000 -0x028D=0x0000 -0x028E=0x0000 -0x028F=0x0000 -0x0290=0x0000 -0x0291=0x0000 -0x0292=0x0000 -0x0293=0x0000 -0x0294=0x0000 -0x0295=0x0000 -0x0296=0x0000 -0x0297=0x0000 -0x0298=0x0000 -0x0299=0x0000 -0x029A=0x0000 -0x029B=0x0000 -0x029C=0x0000 -0x029D=0x0000 -0x029E=0x0000 -0x029F=0x0000 -0x02A0=0x0000 -0x02A1=0x0000 -0x02A2=0x0000 -0x02A3=0x0000 -0x02A4=0x0000 -0x02A5=0x0000 -0x02A6=0x0000 -0x02A7=0x0000 -0x02C0=0x0000 -0x02C1=0x0000 -0x02C2=0x0000 -0x02C3=0x0000 -0x02C4=0x0000 -0x02C5=0x0000 -0x02C6=0x0000 -0x02C7=0x0000 -0x02C8=0x0000 -0x02C9=0x0000 -0x02CA=0x0000 -0x02CB=0x0000 -0x02CC=0x0000 -0x02CD=0x0000 -0x02CE=0x0000 -0x02CF=0x0000 -0x02D0=0x0000 -0x02D1=0x0000 -0x02D2=0x0000 -0x02D3=0x0000 -0x02D4=0x0000 -0x02D5=0x0000 -0x02D6=0x0000 -0x02D7=0x0000 -0x02D8=0x0000 -0x02D9=0x0000 -0x02DA=0x0000 -0x02DB=0x0000 -0x02DC=0x0000 -0x02DD=0x0000 -0x02DE=0x0000 -0x02DF=0x0000 -0x02E0=0x0000 -0x02E1=0x0000 -0x02E2=0x0000 -0x02E3=0x0000 -0x02E4=0x0000 -0x02E5=0x0000 -0x02E6=0x0000 -0x02E7=0x0000 -0x0300=0x0000 -0x0301=0x0000 -0x0302=0x0000 -0x0303=0x0000 -0x0304=0x0000 -0x0305=0x0000 -0x0306=0x0000 -0x0307=0x0000 -0x0308=0x0000 -0x0309=0x0000 -0x030A=0x0000 -0x030B=0x0000 -0x030C=0x0000 -0x030D=0x0000 -0x030E=0x0000 -0x030F=0x0000 -0x0310=0x0000 -0x0311=0x0000 -0x0312=0x0000 -0x0313=0x0000 -0x0314=0x0000 -0x0315=0x0000 -0x0316=0x0000 -0x0317=0x0000 -0x0318=0x0000 -0x0319=0x0000 -0x031A=0x0000 -0x031B=0x0000 -0x031C=0x0000 -0x031D=0x0000 -0x031E=0x0000 -0x031F=0x0000 -0x0320=0x0000 -0x0321=0x0000 -0x0322=0x0000 -0x0323=0x0000 -0x0324=0x0000 -0x0325=0x0000 -0x0326=0x0000 -0x0327=0x0000 -0x0340=0x0000 -0x0341=0x0000 -0x0342=0x0000 -0x0343=0x0000 -0x0344=0x0000 -0x0345=0x0000 -0x0346=0x0000 -0x0347=0x0000 -0x0348=0x0000 -0x0349=0x0000 -0x034A=0x0000 -0x034B=0x0000 -0x034C=0x0000 -0x034D=0x0000 -0x034E=0x0000 -0x034F=0x0000 -0x0350=0x0000 -0x0351=0x0000 -0x0352=0x0000 -0x0353=0x0000 -0x0354=0x0000 -0x0355=0x0000 -0x0356=0x0000 -0x0357=0x0000 -0x0358=0x0000 -0x0359=0x0000 -0x035A=0x0000 -0x035B=0x0000 -0x035C=0x0000 -0x035D=0x0000 -0x035E=0x0000 -0x035F=0x0000 -0x0360=0x0000 -0x0361=0x0000 -0x0362=0x0000 -0x0363=0x0000 -0x0364=0x0000 -0x0365=0x0000 -0x0366=0x0000 -0x0367=0x0000 -0x0380=0x0000 -0x0381=0x0000 -0x0382=0x0000 -0x0383=0x0000 -0x0384=0x0000 -0x0385=0x0000 -0x0386=0x0000 -0x0387=0x0000 -0x0388=0x0000 -0x0389=0x0000 -0x038A=0x0000 -0x038B=0x0000 -0x038C=0x0000 -0x038D=0x0000 -0x038E=0x0000 -0x038F=0x0000 -0x0390=0x0000 -0x0391=0x0000 -0x0392=0x0000 -0x0393=0x0000 -0x0394=0x0000 -0x0395=0x0000 -0x0396=0x0000 -0x0397=0x0000 -0x0398=0x0000 -0x0399=0x0000 -0x039A=0x0000 -0x039B=0x0000 -0x039C=0x0000 -0x039D=0x0000 -0x039E=0x0000 -0x039F=0x0000 -0x03A0=0x0000 -0x03A1=0x0000 -0x03A2=0x0000 -0x03A3=0x0000 -0x03A4=0x0000 -0x03A5=0x0000 -0x03A6=0x0000 -0x03A7=0x0000 -0x0400=0x0101 -0x0401=0x07FF -0x0402=0x079B -0x0403=0x0FF5 -0x0404=0x0000 -0x0405=0x0000 -0x0406=0x0000 -0x0407=0x0000 -0x0408=0x0000 -0x0409=0x0000 -0x040A=0x0000 -0x040B=0x7FFF -0x040C=0x00FC -0x040D=0x0000 -0x040E=0x0000 -0x040F=0x0000 -0x0440=0x0020 -0x0441=0x0000 -0x0442=0x0000 -0x0443=0x0000 -0x0444=0x0000 -0x0445=0x0000 -0x0446=0x0000 -0x0447=0x0000 -0x0448=0x0000 -0x0449=0x0000 -0x044A=0x0000 -0x044B=0x0000 -0x044C=0x0000 -0x044D=0x0000 -0x044E=0x0000 -0x044F=0x0000 -0x0450=0x0000 -0x0451=0x0000 -0x0452=0x0000 -0x0453=0x0000 -0x0454=0x0000 -0x0455=0x0000 -0x0456=0x0000 -0x0457=0x0000 -0x0458=0x0000 -0x0459=0x0000 -0x045A=0x0000 -0x045B=0x0000 -0x045C=0x0000 -0x045D=0x0000 -0x045E=0x0000 -0x045F=0x0000 -0x0460=0x0000 -0x0461=0x0000 -0x0480=0x0000 -0x0481=0x0000 -0x0482=0x0000 -0x0483=0x0000 -0x0484=0x0000 -0x0485=0x0000 -0x0486=0x0000 -0x0487=0x0000 -0x0488=0x0000 -0x0489=0x0000 -0x048A=0x0000 -0x048B=0x0000 -0x048C=0x0000 -0x048D=0x0000 -0x048E=0x0000 -0x048F=0x0000 -0x0490=0x0000 -0x0491=0x0000 -0x0492=0x0000 -0x0493=0x0000 -0x0494=0x0000 -0x0495=0x0000 -0x0496=0x0000 -0x0497=0x0000 -0x0498=0x0000 -0x0499=0x0000 -0x049A=0x0000 -0x049B=0x0000 -0x049C=0x0000 -0x049D=0x0000 -0x049E=0x0000 -0x049F=0x0000 -0x04A0=0x0000 -0x04A1=0x0000 -0x04A2=0x0000 -0x04A3=0x0000 -0x04A4=0x0000 -0x04A5=0x0000 -0x04A6=0x0000 -0x04A7=0x0000 -0x04C0=0x0000 -0x04C1=0x0000 -0x04C2=0x0000 -0x04C3=0x0000 -0x04C4=0x0000 -0x04C5=0x0000 -0x04C6=0x0000 -0x04C7=0x0000 -0x04C8=0x0000 -0x04C9=0x0000 -0x04CA=0x0000 -0x04CB=0x0000 -0x04CC=0x0000 -0x04CD=0x0000 -0x04CE=0x0000 -0x04CF=0x0000 -0x04D0=0x0000 -0x04D1=0x0000 -0x04D2=0x0000 -0x04D3=0x0000 -0x04D4=0x0000 -0x04D5=0x0000 -0x04D6=0x0000 -0x04D7=0x0000 -0x04D8=0x0000 -0x04D9=0x0000 -0x04DA=0x0000 -0x04DB=0x0000 -0x04DC=0x0000 -0x04DD=0x0000 -0x04DE=0x0000 -0x04DF=0x0000 -0x04E0=0x0000 -0x04E1=0x0000 -0x04E2=0x0000 -0x04E3=0x0000 -0x04E4=0x0000 -0x04E5=0x0000 -0x04E6=0x0000 -0x04E7=0x0000 -0x0500=0x0000 -0x0501=0x0000 -0x0502=0x0000 -0x0503=0x0000 -0x0504=0x0000 -0x0505=0x0000 -0x0506=0x0000 -0x0507=0x0000 -0x0508=0x0000 -0x0509=0x0000 -0x050A=0x0000 -0x050B=0x0000 -0x050C=0x0000 -0x050D=0x0000 -0x050E=0x0000 -0x050F=0x0000 -0x0510=0x0000 -0x0511=0x0000 -0x0512=0x0000 -0x0513=0x0000 -0x0514=0x0000 -0x0515=0x0000 -0x0516=0x0000 -0x0517=0x0000 -0x0518=0x0000 -0x0519=0x0000 -0x051A=0x0000 -0x051B=0x0000 -0x051C=0x0000 -0x051D=0x0000 -0x051E=0x0000 -0x051F=0x0000 -0x0520=0x0000 -0x0521=0x0000 -0x0522=0x0000 -0x0523=0x0000 -0x0524=0x0000 -0x0525=0x0000 -0x0526=0x0000 -0x0527=0x0000 -0x0540=0x0000 -0x0541=0x0000 -0x0542=0x0000 -0x0543=0x0000 -0x0544=0x0000 -0x0545=0x0000 -0x0546=0x0000 -0x0547=0x0000 -0x0548=0x0000 -0x0549=0x0000 -0x054A=0x0000 -0x054B=0x0000 -0x054C=0x0000 -0x054D=0x0000 -0x054E=0x0000 -0x054F=0x0000 -0x0550=0x0000 -0x0551=0x0000 -0x0552=0x0000 -0x0553=0x0000 -0x0554=0x0000 -0x0555=0x0000 -0x0556=0x0000 -0x0557=0x0000 -0x0558=0x0000 -0x0559=0x0000 -0x055A=0x0000 -0x055B=0x0000 -0x055C=0x0000 -0x055D=0x0000 -0x055E=0x0000 -0x055F=0x0000 -0x0560=0x0000 -0x0561=0x0000 -0x0562=0x0000 -0x0563=0x0000 -0x0564=0x0000 -0x0565=0x0000 -0x0566=0x0000 -0x0567=0x0000 -0x0580=0x0000 -0x0581=0x0000 -0x0582=0x0000 -0x0583=0x0000 -0x0584=0x0000 -0x0585=0x0000 -0x0586=0x0000 -0x0587=0x0000 -0x0588=0x0000 -0x0589=0x0000 -0x058A=0x0000 -0x058B=0x0000 -0x058C=0x0000 -0x058D=0x0000 -0x058E=0x0000 -0x058F=0x0000 -0x0590=0x0000 -0x0591=0x0000 -0x0592=0x0000 -0x0593=0x0000 -0x0594=0x0000 -0x0595=0x0000 -0x0596=0x0000 -0x0597=0x0000 -0x0598=0x0000 -0x0599=0x0000 -0x059A=0x0000 -0x059B=0x0000 -0x059C=0x0000 -0x059D=0x0000 -0x059E=0x0000 -0x059F=0x0000 -0x05A0=0x0000 -0x05A1=0x0000 -0x05A2=0x0000 -0x05A3=0x0000 -0x05A4=0x0000 -0x05A5=0x0000 -0x05A6=0x0000 -0x05A7=0x0000 -[reference_clocks] -sxr_ref_clk_mhz=52 -sxt_ref_clk_mhz=52 diff --git a/targets/ARCH/SODERA/lms7_trx_LTE_mimo_TSG.ini b/targets/ARCH/SODERA/lms7_trx_LTE_mimo_TSG.ini deleted file mode 100644 index fb25b06527..0000000000 --- a/targets/ARCH/SODERA/lms7_trx_LTE_mimo_TSG.ini +++ /dev/null @@ -1,1128 +0,0 @@ -[file_info] -type=lms7002m_minimal_config -version=1 -[lms7002_registers_a] -0x0020=0xFFFD -0x0021=0x0E9F -0x0022=0x07FF -0x0023=0x5550 -0x0024=0xE4E4 -0x0025=0x0101 -0x0026=0x0101 -0x0027=0xE4E4 -0x0028=0x0101 -0x0029=0x0101 -0x002A=0x0086 -0x002B=0x0038 -0x002C=0x0000 -0x002D=0xFFFF -0x002E=0x0000 -0x002F=0x3840 -0x0081=0x0000 -0x0082=0x8001 -0x0084=0x0400 -0x0085=0x0001 -0x0086=0x4101 -0x0087=0xB13B -0x0088=0x0303 -0x0089=0x1078 -0x008A=0x0514 -0x008B=0x2184 -0x008C=0x267B -0x0092=0x0001 -0x0093=0x0000 -0x0094=0x0000 -0x0095=0x0000 -0x0096=0x0000 -0x0097=0x0000 -0x0098=0x0000 -0x0099=0x6565 -0x009A=0x658C -0x009B=0x6565 -0x009C=0x658C -0x009D=0x6565 -0x009E=0x658C -0x009F=0x658C -0x00A0=0x6565 -0x00A1=0x6565 -0x00A2=0x6565 -0x00A3=0x6565 -0x00A4=0x6565 -0x00A5=0x6565 -0x00A6=0x0001 -0x00A7=0x6565 -0x00A8=0x0000 -0x00A9=0x8000 -0x00AA=0x0000 -0x00AB=0x0040 -0x00AC=0x2000 -0x00AD=0x03FF -0x00AE=0x0000 -0x0100=0x7409 -0x0101=0x7800 -0x0102=0x3180 -0x0103=0x0A12 -0x0104=0x0088 -0x0105=0x0007 -0x0106=0x3182 -0x0107=0x318C -0x0108=0x9442 -0x0109=0x61C1 -0x010A=0x104C -0x010C=0x8865 -0x010D=0x011A -0x010E=0x2040 -0x010F=0x3042 -0x0110=0x0BF4 -0x0111=0x0083 -0x0112=0xC0E6 -0x0113=0x03C3 -0x0114=0x008D -0x0115=0x0009 -0x0116=0x8180 -0x0117=0x280C -0x0118=0x018C -0x0119=0x18CB -0x011A=0x2E02 -0x011C=0xAD41 -0x011D=0x9D89 -0x011E=0x0398 -0x011F=0x3680 -0x0120=0xB9FF -0x0121=0x3692 -0x0122=0x033F -0x0123=0x267B -0x0124=0x0000 -0x0200=0x0081 -0x0201=0x07B0 -0x0202=0x06F2 -0x0203=0x0FC2 -0x0204=0xD51F -0x0205=0x0000 -0x0206=0x0000 -0x0207=0x0000 -0x0208=0x0070 -0x0209=0x0000 -0x020A=0x0080 -0x020B=0x4000 -0x020C=0x7FFF -0x0240=0x0020 -0x0241=0x0000 -0x0242=0x0000 -0x0243=0x0000 -0x0244=0x0000 -0x0245=0x0000 -0x0246=0x0000 -0x0247=0x0000 -0x0248=0x0000 -0x0249=0x0000 -0x024A=0x0000 -0x024B=0x0000 -0x024C=0x0000 -0x024D=0x0000 -0x024E=0x0000 -0x024F=0x0000 -0x0250=0x0000 -0x0251=0x0000 -0x0252=0x0000 -0x0253=0x0000 -0x0254=0x0000 -0x0255=0x0000 -0x0256=0x0000 -0x0257=0x0000 -0x0258=0x0000 -0x0259=0x0000 -0x025A=0x0000 -0x025B=0x0000 -0x025C=0x0000 -0x025D=0x0000 -0x025E=0x0000 -0x025F=0x0000 -0x0260=0x0000 -0x0261=0x0000 -0x0280=0x0000 -0x0281=0x0000 -0x0282=0x0000 -0x0283=0x0000 -0x0284=0x0000 -0x0285=0x0000 -0x0286=0x0000 -0x0287=0x0000 -0x0288=0x0000 -0x0289=0x0000 -0x028A=0x0000 -0x028B=0x0000 -0x028C=0x0000 -0x028D=0x0000 -0x028E=0x0000 -0x028F=0x0000 -0x0290=0x0000 -0x0291=0x0000 -0x0292=0x0000 -0x0293=0x0000 -0x0294=0x0000 -0x0295=0x0000 -0x0296=0x0000 -0x0297=0x0000 -0x0298=0x0000 -0x0299=0x0000 -0x029A=0x0000 -0x029B=0x0000 -0x029C=0x0000 -0x029D=0x0000 -0x029E=0x0000 -0x029F=0x0000 -0x02A0=0x0000 -0x02A1=0x0000 -0x02A2=0x0000 -0x02A3=0x0000 -0x02A4=0x0000 -0x02A5=0x0000 -0x02A6=0x0000 -0x02A7=0x0000 -0x02C0=0x0000 -0x02C1=0x0000 -0x02C2=0x0000 -0x02C3=0x0000 -0x02C4=0x0000 -0x02C5=0x0000 -0x02C6=0x0000 -0x02C7=0x0000 -0x02C8=0x0000 -0x02C9=0x0000 -0x02CA=0x0000 -0x02CB=0x0000 -0x02CC=0x0000 -0x02CD=0x0000 -0x02CE=0x0000 -0x02CF=0x0000 -0x02D0=0x0000 -0x02D1=0x0000 -0x02D2=0x0000 -0x02D3=0x0000 -0x02D4=0x0000 -0x02D5=0x0000 -0x02D6=0x0000 -0x02D7=0x0000 -0x02D8=0x0000 -0x02D9=0x0000 -0x02DA=0x0000 -0x02DB=0x0000 -0x02DC=0x0000 -0x02DD=0x0000 -0x02DE=0x0000 -0x02DF=0x0000 -0x02E0=0x0000 -0x02E1=0x0000 -0x02E2=0x0000 -0x02E3=0x0000 -0x02E4=0x0000 -0x02E5=0x0000 -0x02E6=0x0000 -0x02E7=0x0000 -0x0300=0x0000 -0x0301=0x0000 -0x0302=0x0000 -0x0303=0x0000 -0x0304=0x0000 -0x0305=0x0000 -0x0306=0x0000 -0x0307=0x0000 -0x0308=0x0000 -0x0309=0x0000 -0x030A=0x0000 -0x030B=0x0000 -0x030C=0x0000 -0x030D=0x0000 -0x030E=0x0000 -0x030F=0x0000 -0x0310=0x0000 -0x0311=0x0000 -0x0312=0x0000 -0x0313=0x0000 -0x0314=0x0000 -0x0315=0x0000 -0x0316=0x0000 -0x0317=0x0000 -0x0318=0x0000 -0x0319=0x0000 -0x031A=0x0000 -0x031B=0x0000 -0x031C=0x0000 -0x031D=0x0000 -0x031E=0x0000 -0x031F=0x0000 -0x0320=0x0000 -0x0321=0x0000 -0x0322=0x0000 -0x0323=0x0000 -0x0324=0x0000 -0x0325=0x0000 -0x0326=0x0000 -0x0327=0x0000 -0x0340=0x0000 -0x0341=0x0000 -0x0342=0x0000 -0x0343=0x0000 -0x0344=0x0000 -0x0345=0x0000 -0x0346=0x0000 -0x0347=0x0000 -0x0348=0x0000 -0x0349=0x0000 -0x034A=0x0000 -0x034B=0x0000 -0x034C=0x0000 -0x034D=0x0000 -0x034E=0x0000 -0x034F=0x0000 -0x0350=0x0000 -0x0351=0x0000 -0x0352=0x0000 -0x0353=0x0000 -0x0354=0x0000 -0x0355=0x0000 -0x0356=0x0000 -0x0357=0x0000 -0x0358=0x0000 -0x0359=0x0000 -0x035A=0x0000 -0x035B=0x0000 -0x035C=0x0000 -0x035D=0x0000 -0x035E=0x0000 -0x035F=0x0000 -0x0360=0x0000 -0x0361=0x0000 -0x0362=0x0000 -0x0363=0x0000 -0x0364=0x0000 -0x0365=0x0000 -0x0366=0x0000 -0x0367=0x0000 -0x0380=0x0000 -0x0381=0x0000 -0x0382=0x0000 -0x0383=0x0000 -0x0384=0x0000 -0x0385=0x0000 -0x0386=0x0000 -0x0387=0x0000 -0x0388=0x0000 -0x0389=0x0000 -0x038A=0x0000 -0x038B=0x0000 -0x038C=0x0000 -0x038D=0x0000 -0x038E=0x0000 -0x038F=0x0000 -0x0390=0x0000 -0x0391=0x0000 -0x0392=0x0000 -0x0393=0x0000 -0x0394=0x0000 -0x0395=0x0000 -0x0396=0x0000 -0x0397=0x0000 -0x0398=0x0000 -0x0399=0x0000 -0x039A=0x0000 -0x039B=0x0000 -0x039C=0x0000 -0x039D=0x0000 -0x039E=0x0000 -0x039F=0x0000 -0x03A0=0x0000 -0x03A1=0x0000 -0x03A2=0x0000 -0x03A3=0x0000 -0x03A4=0x0000 -0x03A5=0x0000 -0x03A6=0x0000 -0x03A7=0x0000 -0x0400=0x0085 -0x0401=0x07FF -0x0402=0x07FF -0x0403=0x0000 -0x0404=0x0000 -0x0405=0x0000 -0x0406=0x0000 -0x0407=0x0000 -0x0408=0x0000 -0x0409=0x0000 -0x040A=0x0003 -0x040B=0x000F -0x040C=0x00FC -0x040D=0x0000 -0x040E=0x0000 -0x040F=0x0000 -0x0440=0x0020 -0x0441=0x0000 -0x0442=0x0563 -0x0443=0xB490 -0x0444=0x02B1 -0x0445=0xDA48 -0x0446=0x0000 -0x0447=0x0000 -0x0448=0x0000 -0x0449=0x0000 -0x044A=0x0000 -0x044B=0x0000 -0x044C=0x0000 -0x044D=0x0000 -0x044E=0x0000 -0x044F=0x0000 -0x0450=0x0000 -0x0451=0x0000 -0x0452=0x0000 -0x0453=0x0000 -0x0454=0x0000 -0x0455=0x0000 -0x0456=0x0000 -0x0457=0x0000 -0x0458=0x0000 -0x0459=0x0000 -0x045A=0x0000 -0x045B=0x0000 -0x045C=0x0000 -0x045D=0x0000 -0x045E=0x0000 -0x045F=0x0000 -0x0460=0x0000 -0x0461=0x0000 -0x0480=0x0000 -0x0481=0x0000 -0x0482=0x0000 -0x0483=0x0000 -0x0484=0x0000 -0x0485=0x0000 -0x0486=0x0000 -0x0487=0x0000 -0x0488=0x0000 -0x0489=0x0000 -0x048A=0x0000 -0x048B=0x0000 -0x048C=0x0000 -0x048D=0x0000 -0x048E=0x0000 -0x048F=0x0000 -0x0490=0x0000 -0x0491=0x0000 -0x0492=0x0000 -0x0493=0x0000 -0x0494=0x0000 -0x0495=0x0000 -0x0496=0x0000 -0x0497=0x0000 -0x0498=0x0000 -0x0499=0x0000 -0x049A=0x0000 -0x049B=0x0000 -0x049C=0x0000 -0x049D=0x0000 -0x049E=0x0000 -0x049F=0x0000 -0x04A0=0x0000 -0x04A1=0x0000 -0x04A2=0x0000 -0x04A3=0x0000 -0x04A4=0x0000 -0x04A5=0x0000 -0x04A6=0x0000 -0x04A7=0x0000 -0x04C0=0x0000 -0x04C1=0x0000 -0x04C2=0x0000 -0x04C3=0x0000 -0x04C4=0x0000 -0x04C5=0x0000 -0x04C6=0x0000 -0x04C7=0x0000 -0x04C8=0x0000 -0x04C9=0x0000 -0x04CA=0x0000 -0x04CB=0x0000 -0x04CC=0x0000 -0x04CD=0x0000 -0x04CE=0x0000 -0x04CF=0x0000 -0x04D0=0x0000 -0x04D1=0x0000 -0x04D2=0x0000 -0x04D3=0x0000 -0x04D4=0x0000 -0x04D5=0x0000 -0x04D6=0x0000 -0x04D7=0x0000 -0x04D8=0x0000 -0x04D9=0x0000 -0x04DA=0x0000 -0x04DB=0x0000 -0x04DC=0x0000 -0x04DD=0x0000 -0x04DE=0x0000 -0x04DF=0x0000 -0x04E0=0x0000 -0x04E1=0x0000 -0x04E2=0x0000 -0x04E3=0x0000 -0x04E4=0x0000 -0x04E5=0x0000 -0x04E6=0x0000 -0x04E7=0x0000 -0x0500=0x0000 -0x0501=0x0000 -0x0502=0x0000 -0x0503=0x0000 -0x0504=0x0000 -0x0505=0x0000 -0x0506=0x0000 -0x0507=0x0000 -0x0508=0x0000 -0x0509=0x0000 -0x050A=0x0000 -0x050B=0x0000 -0x050C=0x0000 -0x050D=0x0000 -0x050E=0x0000 -0x050F=0x0000 -0x0510=0x0000 -0x0511=0x0000 -0x0512=0x0000 -0x0513=0x0000 -0x0514=0x0000 -0x0515=0x0000 -0x0516=0x0000 -0x0517=0x0000 -0x0518=0x0000 -0x0519=0x0000 -0x051A=0x0000 -0x051B=0x0000 -0x051C=0x0000 -0x051D=0x0000 -0x051E=0x0000 -0x051F=0x0000 -0x0520=0x0000 -0x0521=0x0000 -0x0522=0x0000 -0x0523=0x0000 -0x0524=0x0000 -0x0525=0x0000 -0x0526=0x0000 -0x0527=0x0000 -0x0540=0x0000 -0x0541=0x0000 -0x0542=0x0000 -0x0543=0x0000 -0x0544=0x0000 -0x0545=0x0000 -0x0546=0x0000 -0x0547=0x0000 -0x0548=0x0000 -0x0549=0x0000 -0x054A=0x0000 -0x054B=0x0000 -0x054C=0x0000 -0x054D=0x0000 -0x054E=0x0000 -0x054F=0x0000 -0x0550=0x0000 -0x0551=0x0000 -0x0552=0x0000 -0x0553=0x0000 -0x0554=0x0000 -0x0555=0x0000 -0x0556=0x0000 -0x0557=0x0000 -0x0558=0x0000 -0x0559=0x0000 -0x055A=0x0000 -0x055B=0x0000 -0x055C=0x0000 -0x055D=0x0000 -0x055E=0x0000 -0x055F=0x0000 -0x0560=0x0000 -0x0561=0x0000 -0x0562=0x0000 -0x0563=0x0000 -0x0564=0x0000 -0x0565=0x0000 -0x0566=0x0000 -0x0567=0x0000 -0x0580=0x0000 -0x0581=0x0000 -0x0582=0x0000 -0x0583=0x0000 -0x0584=0x0000 -0x0585=0x0000 -0x0586=0x0000 -0x0587=0x0000 -0x0588=0x0000 -0x0589=0x0000 -0x058A=0x0000 -0x058B=0x0000 -0x058C=0x0000 -0x058D=0x0000 -0x058E=0x0000 -0x058F=0x0000 -0x0590=0x0000 -0x0591=0x0000 -0x0592=0x0000 -0x0593=0x0000 -0x0594=0x0000 -0x0595=0x0000 -0x0596=0x0000 -0x0597=0x0000 -0x0598=0x0000 -0x0599=0x0000 -0x059A=0x0000 -0x059B=0x0000 -0x059C=0x0000 -0x059D=0x0000 -0x059E=0x0000 -0x059F=0x0000 -0x05A0=0x0000 -0x05A1=0x0000 -0x05A2=0x0000 -0x05A3=0x0000 -0x05A4=0x0000 -0x05A5=0x0000 -0x05A6=0x0000 -0x05A7=0x0000 -[lms7002_registers_b] -0x0100=0x3409 -0x0101=0x7800 -0x0102=0x3180 -0x0103=0x0A12 -0x0104=0x0088 -0x0105=0x0007 -0x0106=0x3182 -0x0107=0x318C -0x0108=0x9442 -0x0109=0x61C1 -0x010A=0x104C -0x010C=0x88FD -0x010D=0x009E -0x010E=0x2040 -0x010F=0x3042 -0x0110=0x0BF4 -0x0111=0x0083 -0x0112=0xC0E6 -0x0113=0x03C3 -0x0114=0x008D -0x0115=0x0009 -0x0116=0x8180 -0x0117=0x280C -0x0118=0x018C -0x0119=0x18CB -0x011A=0x2E02 -0x011C=0xA941 -0x011D=0xEC4E -0x011E=0x04E4 -0x011F=0x3600 -0x0120=0xB9FF -0x0121=0x3348 -0x0122=0x033F -0x0123=0x267B -0x0124=0x0000 -0x0200=0x0101 -0x0201=0x05BD -0x0202=0x0779 -0x0203=0x0F9E -0x0204=0xBCC2 -0x0205=0x0000 -0x0206=0x0000 -0x0207=0x0000 -0x0208=0x0070 -0x0209=0x0000 -0x020A=0x0080 -0x020B=0x4000 -0x020C=0x7FFF -0x0240=0x0020 -0x0241=0x0000 -0x0242=0x0000 -0x0243=0x0000 -0x0244=0x0000 -0x0245=0x0000 -0x0246=0x0000 -0x0247=0x0000 -0x0248=0x0000 -0x0249=0x0000 -0x024A=0x0000 -0x024B=0x0000 -0x024C=0x0000 -0x024D=0x0000 -0x024E=0x0000 -0x024F=0x0000 -0x0250=0x0000 -0x0251=0x0000 -0x0252=0x0000 -0x0253=0x0000 -0x0254=0x0000 -0x0255=0x0000 -0x0256=0x0000 -0x0257=0x0000 -0x0258=0x0000 -0x0259=0x0000 -0x025A=0x0000 -0x025B=0x0000 -0x025C=0x0000 -0x025D=0x0000 -0x025E=0x0000 -0x025F=0x0000 -0x0260=0x0000 -0x0261=0x0000 -0x0280=0x0000 -0x0281=0x0000 -0x0282=0x0000 -0x0283=0x0000 -0x0284=0x0000 -0x0285=0x0000 -0x0286=0x0000 -0x0287=0x0000 -0x0288=0x0000 -0x0289=0x0000 -0x028A=0x0000 -0x028B=0x0000 -0x028C=0x0000 -0x028D=0x0000 -0x028E=0x0000 -0x028F=0x0000 -0x0290=0x0000 -0x0291=0x0000 -0x0292=0x0000 -0x0293=0x0000 -0x0294=0x0000 -0x0295=0x0000 -0x0296=0x0000 -0x0297=0x0000 -0x0298=0x0000 -0x0299=0x0000 -0x029A=0x0000 -0x029B=0x0000 -0x029C=0x0000 -0x029D=0x0000 -0x029E=0x0000 -0x029F=0x0000 -0x02A0=0x0000 -0x02A1=0x0000 -0x02A2=0x0000 -0x02A3=0x0000 -0x02A4=0x0000 -0x02A5=0x0000 -0x02A6=0x0000 -0x02A7=0x0000 -0x02C0=0x0000 -0x02C1=0x0000 -0x02C2=0x0000 -0x02C3=0x0000 -0x02C4=0x0000 -0x02C5=0x0000 -0x02C6=0x0000 -0x02C7=0x0000 -0x02C8=0x0000 -0x02C9=0x0000 -0x02CA=0x0000 -0x02CB=0x0000 -0x02CC=0x0000 -0x02CD=0x0000 -0x02CE=0x0000 -0x02CF=0x0000 -0x02D0=0x0000 -0x02D1=0x0000 -0x02D2=0x0000 -0x02D3=0x0000 -0x02D4=0x0000 -0x02D5=0x0000 -0x02D6=0x0000 -0x02D7=0x0000 -0x02D8=0x0000 -0x02D9=0x0000 -0x02DA=0x0000 -0x02DB=0x0000 -0x02DC=0x0000 -0x02DD=0x0000 -0x02DE=0x0000 -0x02DF=0x0000 -0x02E0=0x0000 -0x02E1=0x0000 -0x02E2=0x0000 -0x02E3=0x0000 -0x02E4=0x0000 -0x02E5=0x0000 -0x02E6=0x0000 -0x02E7=0x0000 -0x0300=0x0000 -0x0301=0x0000 -0x0302=0x0000 -0x0303=0x0000 -0x0304=0x0000 -0x0305=0x0000 -0x0306=0x0000 -0x0307=0x0000 -0x0308=0x0000 -0x0309=0x0000 -0x030A=0x0000 -0x030B=0x0000 -0x030C=0x0000 -0x030D=0x0000 -0x030E=0x0000 -0x030F=0x0000 -0x0310=0x0000 -0x0311=0x0000 -0x0312=0x0000 -0x0313=0x0000 -0x0314=0x0000 -0x0315=0x0000 -0x0316=0x0000 -0x0317=0x0000 -0x0318=0x0000 -0x0319=0x0000 -0x031A=0x0000 -0x031B=0x0000 -0x031C=0x0000 -0x031D=0x0000 -0x031E=0x0000 -0x031F=0x0000 -0x0320=0x0000 -0x0321=0x0000 -0x0322=0x0000 -0x0323=0x0000 -0x0324=0x0000 -0x0325=0x0000 -0x0326=0x0000 -0x0327=0x0000 -0x0340=0x0000 -0x0341=0x0000 -0x0342=0x0000 -0x0343=0x0000 -0x0344=0x0000 -0x0345=0x0000 -0x0346=0x0000 -0x0347=0x0000 -0x0348=0x0000 -0x0349=0x0000 -0x034A=0x0000 -0x034B=0x0000 -0x034C=0x0000 -0x034D=0x0000 -0x034E=0x0000 -0x034F=0x0000 -0x0350=0x0000 -0x0351=0x0000 -0x0352=0x0000 -0x0353=0x0000 -0x0354=0x0000 -0x0355=0x0000 -0x0356=0x0000 -0x0357=0x0000 -0x0358=0x0000 -0x0359=0x0000 -0x035A=0x0000 -0x035B=0x0000 -0x035C=0x0000 -0x035D=0x0000 -0x035E=0x0000 -0x035F=0x0000 -0x0360=0x0000 -0x0361=0x0000 -0x0362=0x0000 -0x0363=0x0000 -0x0364=0x0000 -0x0365=0x0000 -0x0366=0x0000 -0x0367=0x0000 -0x0380=0x0000 -0x0381=0x0000 -0x0382=0x0000 -0x0383=0x0000 -0x0384=0x0000 -0x0385=0x0000 -0x0386=0x0000 -0x0387=0x0000 -0x0388=0x0000 -0x0389=0x0000 -0x038A=0x0000 -0x038B=0x0000 -0x038C=0x0000 -0x038D=0x0000 -0x038E=0x0000 -0x038F=0x0000 -0x0390=0x0000 -0x0391=0x0000 -0x0392=0x0000 -0x0393=0x0000 -0x0394=0x0000 -0x0395=0x0000 -0x0396=0x0000 -0x0397=0x0000 -0x0398=0x0000 -0x0399=0x0000 -0x039A=0x0000 -0x039B=0x0000 -0x039C=0x0000 -0x039D=0x0000 -0x039E=0x0000 -0x039F=0x0000 -0x03A0=0x0000 -0x03A1=0x0000 -0x03A2=0x0000 -0x03A3=0x0000 -0x03A4=0x0000 -0x03A5=0x0000 -0x03A6=0x0000 -0x03A7=0x0000 -0x0400=0x0105 -0x0401=0x07FF -0x0402=0x079B -0x0403=0x0FF5 -0x0404=0x0000 -0x0405=0x0000 -0x0406=0x0000 -0x0407=0x0000 -0x0408=0x0000 -0x0409=0x0000 -0x040A=0x0000 -0x040B=0x7FFF -0x040C=0x00FC -0x040D=0x0000 -0x040E=0x0000 -0x040F=0x0000 -0x0440=0x0020 -0x0441=0x0000 -0x0442=0x0000 -0x0443=0x0000 -0x0444=0x0000 -0x0445=0x0000 -0x0446=0x0000 -0x0447=0x0000 -0x0448=0x0000 -0x0449=0x0000 -0x044A=0x0000 -0x044B=0x0000 -0x044C=0x0000 -0x044D=0x0000 -0x044E=0x0000 -0x044F=0x0000 -0x0450=0x0000 -0x0451=0x0000 -0x0452=0x0000 -0x0453=0x0000 -0x0454=0x0000 -0x0455=0x0000 -0x0456=0x0000 -0x0457=0x0000 -0x0458=0x0000 -0x0459=0x0000 -0x045A=0x0000 -0x045B=0x0000 -0x045C=0x0000 -0x045D=0x0000 -0x045E=0x0000 -0x045F=0x0000 -0x0460=0x0000 -0x0461=0x0000 -0x0480=0x0000 -0x0481=0x0000 -0x0482=0x0000 -0x0483=0x0000 -0x0484=0x0000 -0x0485=0x0000 -0x0486=0x0000 -0x0487=0x0000 -0x0488=0x0000 -0x0489=0x0000 -0x048A=0x0000 -0x048B=0x0000 -0x048C=0x0000 -0x048D=0x0000 -0x048E=0x0000 -0x048F=0x0000 -0x0490=0x0000 -0x0491=0x0000 -0x0492=0x0000 -0x0493=0x0000 -0x0494=0x0000 -0x0495=0x0000 -0x0496=0x0000 -0x0497=0x0000 -0x0498=0x0000 -0x0499=0x0000 -0x049A=0x0000 -0x049B=0x0000 -0x049C=0x0000 -0x049D=0x0000 -0x049E=0x0000 -0x049F=0x0000 -0x04A0=0x0000 -0x04A1=0x0000 -0x04A2=0x0000 -0x04A3=0x0000 -0x04A4=0x0000 -0x04A5=0x0000 -0x04A6=0x0000 -0x04A7=0x0000 -0x04C0=0x0000 -0x04C1=0x0000 -0x04C2=0x0000 -0x04C3=0x0000 -0x04C4=0x0000 -0x04C5=0x0000 -0x04C6=0x0000 -0x04C7=0x0000 -0x04C8=0x0000 -0x04C9=0x0000 -0x04CA=0x0000 -0x04CB=0x0000 -0x04CC=0x0000 -0x04CD=0x0000 -0x04CE=0x0000 -0x04CF=0x0000 -0x04D0=0x0000 -0x04D1=0x0000 -0x04D2=0x0000 -0x04D3=0x0000 -0x04D4=0x0000 -0x04D5=0x0000 -0x04D6=0x0000 -0x04D7=0x0000 -0x04D8=0x0000 -0x04D9=0x0000 -0x04DA=0x0000 -0x04DB=0x0000 -0x04DC=0x0000 -0x04DD=0x0000 -0x04DE=0x0000 -0x04DF=0x0000 -0x04E0=0x0000 -0x04E1=0x0000 -0x04E2=0x0000 -0x04E3=0x0000 -0x04E4=0x0000 -0x04E5=0x0000 -0x04E6=0x0000 -0x04E7=0x0000 -0x0500=0x0000 -0x0501=0x0000 -0x0502=0x0000 -0x0503=0x0000 -0x0504=0x0000 -0x0505=0x0000 -0x0506=0x0000 -0x0507=0x0000 -0x0508=0x0000 -0x0509=0x0000 -0x050A=0x0000 -0x050B=0x0000 -0x050C=0x0000 -0x050D=0x0000 -0x050E=0x0000 -0x050F=0x0000 -0x0510=0x0000 -0x0511=0x0000 -0x0512=0x0000 -0x0513=0x0000 -0x0514=0x0000 -0x0515=0x0000 -0x0516=0x0000 -0x0517=0x0000 -0x0518=0x0000 -0x0519=0x0000 -0x051A=0x0000 -0x051B=0x0000 -0x051C=0x0000 -0x051D=0x0000 -0x051E=0x0000 -0x051F=0x0000 -0x0520=0x0000 -0x0521=0x0000 -0x0522=0x0000 -0x0523=0x0000 -0x0524=0x0000 -0x0525=0x0000 -0x0526=0x0000 -0x0527=0x0000 -0x0540=0x0000 -0x0541=0x0000 -0x0542=0x0000 -0x0543=0x0000 -0x0544=0x0000 -0x0545=0x0000 -0x0546=0x0000 -0x0547=0x0000 -0x0548=0x0000 -0x0549=0x0000 -0x054A=0x0000 -0x054B=0x0000 -0x054C=0x0000 -0x054D=0x0000 -0x054E=0x0000 -0x054F=0x0000 -0x0550=0x0000 -0x0551=0x0000 -0x0552=0x0000 -0x0553=0x0000 -0x0554=0x0000 -0x0555=0x0000 -0x0556=0x0000 -0x0557=0x0000 -0x0558=0x0000 -0x0559=0x0000 -0x055A=0x0000 -0x055B=0x0000 -0x055C=0x0000 -0x055D=0x0000 -0x055E=0x0000 -0x055F=0x0000 -0x0560=0x0000 -0x0561=0x0000 -0x0562=0x0000 -0x0563=0x0000 -0x0564=0x0000 -0x0565=0x0000 -0x0566=0x0000 -0x0567=0x0000 -0x0580=0x0000 -0x0581=0x0000 -0x0582=0x0000 -0x0583=0x0000 -0x0584=0x0000 -0x0585=0x0000 -0x0586=0x0000 -0x0587=0x0000 -0x0588=0x0000 -0x0589=0x0000 -0x058A=0x0000 -0x058B=0x0000 -0x058C=0x0000 -0x058D=0x0000 -0x058E=0x0000 -0x058F=0x0000 -0x0590=0x0000 -0x0591=0x0000 -0x0592=0x0000 -0x0593=0x0000 -0x0594=0x0000 -0x0595=0x0000 -0x0596=0x0000 -0x0597=0x0000 -0x0598=0x0000 -0x0599=0x0000 -0x059A=0x0000 -0x059B=0x0000 -0x059C=0x0000 -0x059D=0x0000 -0x059E=0x0000 -0x059F=0x0000 -0x05A0=0x0000 -0x05A1=0x0000 -0x05A2=0x0000 -0x05A3=0x0000 -0x05A4=0x0000 -0x05A5=0x0000 -0x05A6=0x0000 -0x05A7=0x0000 -[reference_clocks] -sxr_ref_clk_mhz=52 -sxt_ref_clk_mhz=52 diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.bladerfx40.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.bladerfx40.conf index 5f7ac3d65f..eb3895dc6d 100644 --- a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.bladerfx40.conf +++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.bladerfx40.conf @@ -17,7 +17,7 @@ eNBs = mobile_country_code = "208"; - mobile_network_code = "92"; + mobile_network_code = "93"; ////////// Physical parameters: @@ -132,7 +132,7 @@ eNBs = }; ////////// MME parameters: - mme_ip_address = ( { ipv4 = "192.168.13.11"; + mme_ip_address = ( { ipv4 = "192.168.12.11"; ipv6 = "192:168:30::17"; active = "yes"; preference = "ipv4"; @@ -142,10 +142,10 @@ eNBs = NETWORK_INTERFACES : { ENB_INTERFACE_NAME_FOR_S1_MME = "eth0"; - ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.13.10/24"; + ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.215/24"; ENB_INTERFACE_NAME_FOR_S1U = "eth0"; - ENB_IPV4_ADDRESS_FOR_S1U = "192.168.13.10/24"; + ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.215/24"; ENB_PORT_FOR_S1U = 2152; # Spec 2152 }; From fb7f4ab9d995d74e030ce6a4916a482683fbd396 Mon Sep 17 00:00:00 2001 From: kaltenbe Date: Fri, 29 Jan 2016 09:49:36 +0100 Subject: [PATCH 13/55] removed old stuff --- targets/ARCH/{SODERA => LMSSDR}/SoDeRa_MIMO.ini | 0 targets/ARCH/{SODERA => LMSSDR}/USERSPACE/LIB/sodera_lib.cpp | 0 2 files changed, 0 insertions(+), 0 deletions(-) rename targets/ARCH/{SODERA => LMSSDR}/SoDeRa_MIMO.ini (100%) rename targets/ARCH/{SODERA => LMSSDR}/USERSPACE/LIB/sodera_lib.cpp (100%) diff --git a/targets/ARCH/SODERA/SoDeRa_MIMO.ini b/targets/ARCH/LMSSDR/SoDeRa_MIMO.ini similarity index 100% rename from targets/ARCH/SODERA/SoDeRa_MIMO.ini rename to targets/ARCH/LMSSDR/SoDeRa_MIMO.ini diff --git a/targets/ARCH/SODERA/USERSPACE/LIB/sodera_lib.cpp b/targets/ARCH/LMSSDR/USERSPACE/LIB/sodera_lib.cpp similarity index 100% rename from targets/ARCH/SODERA/USERSPACE/LIB/sodera_lib.cpp rename to targets/ARCH/LMSSDR/USERSPACE/LIB/sodera_lib.cpp From d30eeea8e5827f803d21be68345f7b075761e56b Mon Sep 17 00:00:00 2001 From: kaltenbe Date: Sat, 30 Jan 2016 23:44:14 +0100 Subject: [PATCH 14/55] integration with Lime contribution for LMSSDR library. Renamed everything from SODERA to LMSSDR --- cmake_targets/CMakeLists.txt | 31 ++++++++----------- cmake_targets/build_oai | 8 ++--- targets/ARCH/COMMON/common_lib.c | 11 ++++--- targets/ARCH/COMMON/common_lib.h | 6 ++-- .../CONF/enb.band7.tm1.bladerfx40.conf | 4 +-- targets/RT/USER/lte-softmodem.c | 4 +++ 6 files changed, 32 insertions(+), 32 deletions(-) diff --git a/cmake_targets/CMakeLists.txt b/cmake_targets/CMakeLists.txt index a8af214ce1..eb19864e95 100644 --- a/cmake_targets/CMakeLists.txt +++ b/cmake_targets/CMakeLists.txt @@ -405,7 +405,7 @@ add_list1_option(NB_ANTENNAS_RX "2" "Number of antennas in reception" "1" "2" "4 add_list1_option(NB_ANTENNAS_TX "2" "Number of antennas in transmission" "1" "2" "4") add_list1_option(NB_ANTENNAS_TXRX "2" "Number of antennas in ????" "1" "2" "4") -add_list2_option(RF_BOARD "EXMIMO" "RF head type" "False" "EXMIMO" "OAI_USRP" "ETHERNET" "OAI_BLADERF" "OAI_SODERA" "CPRIGW") +add_list2_option(RF_BOARD "EXMIMO" "RF head type" "False" "EXMIMO" "OAI_USRP" "ETHERNET" "OAI_BLADERF" "OAI_LMSSDR" "CPRIGW") Message("RF_BOARD is ${RF_BOARD}") @@ -437,25 +437,19 @@ elseif (${RF_BOARD} STREQUAL "OAI_BLADERF") set(option_HW_lib "bladeRF") #set(LOWLATENCY False) -elseif (${RF_BOARD} STREQUAL "OAI_SODERA") - include_directories("${OPENAIR_TARGETS}/ARCH/SODERA/USERSPACE/LIB") - include_directories("${OPENAIR_TARGETS}/ARCH/SODERA/USERSPACE/LIB/lms7suite/src/lms7002m") - include_directories("${OPENAIR_TARGETS}/ARCH/SODERA/USERSPACE/LIB/lms7suite/src/Si5351C") - include_directories("${OPENAIR_TARGETS}/ARCH/SODERA/USERSPACE/LIB/lms7suite/src/LMS_StreamBoard") +elseif (${RF_BOARD} STREQUAL "OAI_LMSSDR") + include_directories("${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB") + include_directories("${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR") + include_directories("${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB/lms7002m") +# include_directories("${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB/Si5351C") + include_directories("${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB/LMS_StreamBoard") set(HW_SOURCE ${HW_SOURCE} - ${OPENAIR_TARGETS}/ARCH/SODERA/USERSPACE/LIB/sodera_lib.cpp + ${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB/lms_lib.cpp ) - LINK_DIRECTORIES("${OPENAIR_TARGETS}/ARCH/SODERA/USERSPACE/LIB/lms7suite/src/lms7002m") - LINK_DIRECTORIES("${OPENAIR_TARGETS}/ARCH/SODERA/USERSPACE/LIB/lms7suite/src/Si5351C") - LINK_DIRECTORIES("${OPENAIR_TARGETS}/ARCH/SODERA/USERSPACE/LIB/lms7suite/src/LMS_StreamBoard") - LINK_DIRECTORIES("${OPENAIR_TARGETS}/ARCH/SODERA/USERSPACE/LIB/lms7suite/src/kissFFT") LINK_DIRECTORIES("/usr/lib/x86_64-linux-gnu") - set(option_HW_lib "usb-1.0") - set(LMS7002_LIB "libLMS7002M.a") - set(Si5351C_LIB "libSi5351C.a") - set(LMSStreamBoard_LIB "libLMS_StreamBoard.a") - set(KISSFFT_LIB "libkissFFT.a") - #set(LOWLATENCY False) + set(HW_SOURCE ${HW_SOURCE} ${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB/lms_lib.cpp) + set(LIB_LMS_LIBRARIES "${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/build/libLMS_SDR.so" "${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/build/libLMS7002M.a") + set(LOWLATENCY False) elseif (${RF_BOARD} STREQUAL "ETHERNET") include_directories ("${OPENAIR_TARGETS}/ARCH/ETHERNET/USERSPACE/LIB") @@ -1454,13 +1448,14 @@ add_executable(lte-softmodem target_link_libraries (lte-softmodem -Wl,--start-group - RRC_LIB S1AP_LIB S1AP_ENB GTPV1U SECU_CN SECU_OSA UTIL HASHTABLE SCTP_CLIENT UDP SCHED_LIB PHY LFDS L2 ${MSC_LIB} ${RAL_LIB} ${NAS_UE_LIB} ${ITTI_LIB} ${MIH_LIB} ${LMS7002_LIB} ${Si5351C_LIB} ${LMSStreamBoard_LIB} ${KISSFFT_LIB} + RRC_LIB S1AP_LIB S1AP_ENB GTPV1U SECU_CN SECU_OSA UTIL HASHTABLE SCTP_CLIENT UDP SCHED_LIB PHY LFDS L2 ${MSC_LIB} ${RAL_LIB} ${NAS_UE_LIB} ${ITTI_LIB} ${MIH_LIB} -Wl,--end-group ) target_link_libraries (lte-softmodem ${LIBXML2_LIBRARIES}) target_link_libraries (lte-softmodem pthread m ${CONFIG_LIBRARIES} rt crypt ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} sctp ${option_HW_lib} ${XFORMS_LIBRARIES} ) target_link_libraries (lte-softmodem ${LIBBOOST_LIBRARIES}) +target_link_libraries (lte-softmodem ${LIB_LMS_LIBRARIES}) # lte-softmodem-nos1 is both eNB and UE implementation ################################################### diff --git a/cmake_targets/build_oai b/cmake_targets/build_oai index 4a18e53f47..6d2021eb01 100755 --- a/cmake_targets/build_oai +++ b/cmake_targets/build_oai @@ -90,7 +90,7 @@ Options default is Rel10, Rel8 limits the implementation to 3GPP Release 8 version -w | --hardware - EXMIMO (Default), USRP, BLADERF, SODERA, ETHERNET, None + EXMIMO (Default), USRP, BLADERF, LMSSDR, ETHERNET, None Adds this RF board support (in external packages installation and in compilation) --oaisim Makes the oaisim simulator. Hardware will be defaulted to "NONE". @@ -181,8 +181,8 @@ function main() { if [ "$HW" == "BLADERF" ] ; then HW="OAI_BLADERF" fi - if [ "$HW" == "SODERA" ] ; then - HW="OAI_SODERA" + if [ "$HW" == "LMSSDR" ] ; then + HW="OAI_LMSSDR" fi echo_info "setting hardware to: $HW" shift 2;; @@ -266,7 +266,7 @@ function main() { LOWLATENCY_FLAG_USER="False" elif [ "$HW" = "OAI_BLADERF" ] ; then LOWLATENCY_FLAG_USER="False" - elif [ "$HW" = "OAI_SODERA" ] ; then + elif [ "$HW" = "OAI_LMSSDR" ] ; then LOWLATENCY_FLAG_USER="False" elif [ "$HW" = "None" ] ; then LOWLATENCY_FLAG_USER="False" diff --git a/targets/ARCH/COMMON/common_lib.c b/targets/ARCH/COMMON/common_lib.c index 278d8ed79f..69496f69ef 100644 --- a/targets/ARCH/COMMON/common_lib.c +++ b/targets/ARCH/COMMON/common_lib.c @@ -61,15 +61,16 @@ int openair0_device_init(openair0_device *device, openair0_config_t *openair0_cf device->type=BLADERF_IF; printf("openair0_dev_init_bladerf ...\n"); return(openair0_dev_init_bladerf(device, openair0_cfg)); -#elif OAI_SODERA - device->type=OAI_SODERA; - printf("openair0_dev_init_sodera ...\n"); +#elif OAI_LMSSDR + device->type=LMSSDR_IF; + printf("openair0_dev_init_lmssdr ...\n"); + /* if (openair0_cfg[0].configFilename==NULL) { printf("Please provide a configuration file for SoDeRa\n"); exit(-1); - } + }*/ - return(openair0_dev_init_sodera(device, openair0_cfg)); + return(openair0_dev_init_lms(device, openair0_cfg)); #endif } diff --git a/targets/ARCH/COMMON/common_lib.h b/targets/ARCH/COMMON/common_lib.h index 3f814a9e55..8255b8f2ab 100644 --- a/targets/ARCH/COMMON/common_lib.h +++ b/targets/ARCH/COMMON/common_lib.h @@ -165,8 +165,8 @@ typedef enum { USRP_X300_IF, /*!\brief device is BLADE RF*/ BLADERF_IF, - /*!\brief device is SODERA RF*/ - SODERARF_IF, + /*!\brief device is LMSSDR*/ + LMSSDR_IF, /*!\brief device is NONE*/ NONE_IF, MAX_DEV_TYPE @@ -298,7 +298,7 @@ extern "C" /*! \brief Initialize Openair ETHERNET target. It returns 0 if OK */ int openair0_dev_init_eth(openair0_device *device, openair0_config_t *openair0_cfg); int openair0_dev_init_bladerf(openair0_device *device, openair0_config_t *openair0_cfg); - int openair0_dev_init_sodera(openair0_device *device, openair0_config_t *openair0_cfg); + int openair0_dev_init_lms(openair0_device *device, openair0_config_t *openair0_cfg); int openair0_dev_init_usrp(openair0_device* device, openair0_config_t *openair0_cfg); int openair0_dev_init_exmimo(openair0_device *device, openair0_config_t *openair0_cfg); /*@}*/ diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf index 5c53803c4d..5a6a9a462b 100644 --- a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf +++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf @@ -142,10 +142,10 @@ eNBs = NETWORK_INTERFACES : { ENB_INTERFACE_NAME_FOR_S1_MME = "eth0"; - ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.212/24"; + ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.215/24"; ENB_INTERFACE_NAME_FOR_S1U = "eth0"; - ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.212/24"; + ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.215/24"; ENB_PORT_FOR_S1U = 2152; # Spec 2152 }; diff --git a/targets/RT/USER/lte-softmodem.c b/targets/RT/USER/lte-softmodem.c index 612239bec3..a431b35498 100644 --- a/targets/RT/USER/lte-softmodem.c +++ b/targets/RT/USER/lte-softmodem.c @@ -956,6 +956,8 @@ void do_OFDM_mod_rt(int subframe,PHY_VARS_eNB *phy_vars_eNB) ((short*)dummy_tx_b)[2*i]<<4; #elif OAI_BLADERF ((short*)dummy_tx_b)[2*i]; +#elif OAI_LMSSDR + ((short*)dummy_tx_b)[2*i]; #else ((short*)dummy_tx_b)[2*i]<<4; #endif @@ -964,6 +966,8 @@ void do_OFDM_mod_rt(int subframe,PHY_VARS_eNB *phy_vars_eNB) ((short*)dummy_tx_b)[2*i+1]<<4; #elif OAI_BLADERF ((short*)dummy_tx_b)[2*i+1]; +#elif OAI_LMSSDR + ((short*)dummy_tx_b)[2*i+1]; #else ((short*)dummy_tx_b)[2*i+1]<<4; #endif From 2b61863abb857541f9ca7f13e8b9003df0f1dad9 Mon Sep 17 00:00:00 2001 From: kaltenbe Date: Tue, 9 Feb 2016 09:29:26 +0100 Subject: [PATCH 15/55] TX/RX Calibration procedures (lighter than full LMS procedures) --- cmake_targets/CMakeLists.txt | 6 +++--- targets/RT/USER/lte-softmodem.c | 12 ++++++++++-- 2 files changed, 13 insertions(+), 5 deletions(-) diff --git a/cmake_targets/CMakeLists.txt b/cmake_targets/CMakeLists.txt index eb19864e95..23325ace81 100644 --- a/cmake_targets/CMakeLists.txt +++ b/cmake_targets/CMakeLists.txt @@ -441,14 +441,14 @@ elseif (${RF_BOARD} STREQUAL "OAI_LMSSDR") include_directories("${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB") include_directories("${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR") include_directories("${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB/lms7002m") -# include_directories("${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB/Si5351C") - include_directories("${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB/LMS_StreamBoard") + include_directories("${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB/Si5351C") + include_directories("${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/LMS_StreamBoard") set(HW_SOURCE ${HW_SOURCE} ${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB/lms_lib.cpp ) LINK_DIRECTORIES("/usr/lib/x86_64-linux-gnu") set(HW_SOURCE ${HW_SOURCE} ${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB/lms_lib.cpp) - set(LIB_LMS_LIBRARIES "${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/build/libLMS_SDR.so" "${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/build/libLMS7002M.a") + set(LIB_LMS_LIBRARIES "${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/build/libLMS_SDR.so" "${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/build/libLMS7002M.a" "${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/libSi5351C.a") set(LOWLATENCY False) elseif (${RF_BOARD} STREQUAL "ETHERNET") diff --git a/targets/RT/USER/lte-softmodem.c b/targets/RT/USER/lte-softmodem.c index a431b35498..7bfb56c6cb 100644 --- a/targets/RT/USER/lte-softmodem.c +++ b/targets/RT/USER/lte-softmodem.c @@ -941,10 +941,17 @@ void do_OFDM_mod_rt(int subframe,PHY_VARS_eNB *phy_vars_eNB) len = phy_vars_eNB->lte_frame_parms.samples_per_tti>>1; else len = phy_vars_eNB->lte_frame_parms.samples_per_tti; - - for (i=0; ilte_frame_parms.samples_per_tti; @@ -957,6 +964,7 @@ void do_OFDM_mod_rt(int subframe,PHY_VARS_eNB *phy_vars_eNB) #elif OAI_BLADERF ((short*)dummy_tx_b)[2*i]; #elif OAI_LMSSDR + //phy_vars_eNB->lte_eNB_common_vars.txdata[0][aa][tx_offset]=dummy_tx_b[i]; ((short*)dummy_tx_b)[2*i]; #else ((short*)dummy_tx_b)[2*i]<<4; From c5c5d9d10ddbd762db6c974fefe47fd720f7c9e1 Mon Sep 17 00:00:00 2001 From: Rohit Gupta Date: Wed, 10 Feb 2016 11:13:32 +0100 Subject: [PATCH 16/55] fix for bladeRF init --- targets/ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/targets/ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.c b/targets/ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.c index 295dcaded4..3ab17bbfec 100644 --- a/targets/ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.c +++ b/targets/ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.c @@ -822,7 +822,7 @@ void calibrate_rf(openair0_device *device) { // write_output("blade_rf_test.m","rxs",calib_buff,RXDCLENGTH,1,1); } -int openair0_dev_init_bladerf(openair0_device *device, openair0_config_t *openair0_cfg) { +int device_init(openair0_device *device, openair0_config_t *openair0_cfg) { int status; int card=0; From 051a4e2aa550ad3ac886e05149c498c18ab622a2 Mon Sep 17 00:00:00 2001 From: kaltenbe Date: Thu, 11 Feb 2016 10:04:36 +0100 Subject: [PATCH 17/55] added Si5351C directory changes in lmslib.cpp --- openair1/PHY/LTE_REFSIG/primary_synch.h | 28 - openair1/PHY/LTE_TRANSPORT/initial_sync.c | 25 +- openair1/PHY/LTE_TRANSPORT/print_stats.c | 6 +- openair1/SCHED/phy_procedures_lte_ue.c | 30 +- .../USERSPACE/LIB/Si5351C/CMakeLists.txt | 11 + .../LMSSDR/USERSPACE/LIB/Si5351C/Si5351C.cpp | 872 ++++++++++++++++++ .../LMSSDR/USERSPACE/LIB/Si5351C/Si5351C.h | 100 ++ .../LIB/Si5351C/build/CMakeCache.txt | 326 +++++++ .../CMakeFiles/2.8.12.2/CMakeCCompiler.cmake | 56 ++ .../2.8.12.2/CMakeCXXCompiler.cmake | 57 ++ .../2.8.12.2/CMakeDetermineCompilerABI_C.bin | Bin 0 -> 8587 bytes .../CMakeDetermineCompilerABI_CXX.bin | Bin 0 -> 8600 bytes .../CMakeFiles/2.8.12.2/CMakeSystem.cmake | 15 + .../2.8.12.2/CompilerIdC/CMakeCCompilerId.c | 389 ++++++++ .../CMakeFiles/2.8.12.2/CompilerIdC/a.out | Bin 0 -> 8683 bytes .../CompilerIdCXX/CMakeCXXCompilerId.cpp | 377 ++++++++ .../CMakeFiles/2.8.12.2/CompilerIdCXX/a.out | Bin 0 -> 8692 bytes .../CMakeDirectoryInformation.cmake | 16 + .../Si5351C/build/CMakeFiles/CMakeOutput.log | 263 ++++++ .../Si5351C/build/CMakeFiles/Makefile.cmake | 43 + .../LIB/Si5351C/build/CMakeFiles/Makefile2 | 102 ++ .../CMakeFiles/Si5351C.dir/CXX.includecache | 8 + .../CMakeFiles/Si5351C.dir/DependInfo.cmake | 22 + .../build/CMakeFiles/Si5351C.dir/Si5351C.o | Bin 0 -> 144184 bytes .../build/CMakeFiles/Si5351C.dir/build.make | 106 +++ .../CMakeFiles/Si5351C.dir/cmake_clean.cmake | 10 + .../Si5351C.dir/cmake_clean_target.cmake | 3 + .../CMakeFiles/Si5351C.dir/depend.internal | 6 + .../build/CMakeFiles/Si5351C.dir/depend.make | 6 + .../build/CMakeFiles/Si5351C.dir/flags.make | 8 + .../build/CMakeFiles/Si5351C.dir/link.txt | 2 + .../CMakeFiles/Si5351C.dir/progress.make | 2 + .../build/CMakeFiles/TargetDirectories.txt | 1 + .../build/CMakeFiles/cmake.check_cache | 1 + .../Si5351C/build/CMakeFiles/progress.marks | 1 + .../USERSPACE/LIB/Si5351C/build/Makefile | 157 ++++ .../LIB/Si5351C/build/cmake_install.cmake | 44 + .../USERSPACE/LIB/Si5351C/build/libSi5351C.a | Bin 0 -> 162342 bytes targets/RT/USER/lte-softmodem.c | 4 +- targets/RT/USER/lte-ue.c | 6 +- 40 files changed, 3038 insertions(+), 65 deletions(-) create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/CMakeLists.txt create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/Si5351C.cpp create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/Si5351C.h create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeCache.txt create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CMakeCCompiler.cmake create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CMakeCXXCompiler.cmake create mode 100755 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CMakeDetermineCompilerABI_C.bin create mode 100755 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CMakeDetermineCompilerABI_CXX.bin create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CMakeSystem.cmake create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CompilerIdC/CMakeCCompilerId.c create mode 100755 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CompilerIdC/a.out create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CompilerIdCXX/CMakeCXXCompilerId.cpp create mode 100755 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CompilerIdCXX/a.out create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeDirectoryInformation.cmake create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeOutput.log create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Makefile.cmake create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Makefile2 create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/CXX.includecache create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/DependInfo.cmake create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/Si5351C.o create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/build.make create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/cmake_clean.cmake create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/cmake_clean_target.cmake create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/depend.internal create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/depend.make create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/flags.make create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/link.txt create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/progress.make create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/TargetDirectories.txt create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/cmake.check_cache create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/progress.marks create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/Makefile create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/cmake_install.cmake create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/libSi5351C.a diff --git a/openair1/PHY/LTE_REFSIG/primary_synch.h b/openair1/PHY/LTE_REFSIG/primary_synch.h index f9cf6fc171..717f2e552c 100644 --- a/openair1/PHY/LTE_REFSIG/primary_synch.h +++ b/openair1/PHY/LTE_REFSIG/primary_synch.h @@ -1,31 +1,3 @@ -/******************************************************************************* - OpenAirInterface - Copyright(c) 1999 - 2014 Eurecom - - OpenAirInterface is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - - OpenAirInterface is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with OpenAirInterface.The full GNU General Public License is - included in this distribution in the file called "COPYING". If not, - see . - - Contact Information - OpenAirInterface Admin: openair_admin@eurecom.fr - OpenAirInterface Tech : openair_tech@eurecom.fr - OpenAirInterface Dev : openair4g-devel@lists.eurecom.fr - - Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE - - *******************************************************************************/ short primary_synch0[144] = {0,0,0,0,0,0,0,0,0,0,32767,0,-26120,-19785,11971,-30502,-24020,-22288,32117,6492,31311,9658,-16384,-28378,25100,-21063,-7292,-31946,20429,25618,14948,29158,11971,-30502,31311,9658,25100,-21063,-16384,28377,-24020,22287,32117,6492,-7292,31945,20429,25618,-26120,-19785,-16384,-28378,-16384,28377,-26120,-19785,-32402,4883,31311,-9659,32117,6492,-7292,-31946,32767,-1,25100,-21063,-24020,22287,-32402,4883,-32402,4883,-24020,22287,25100,-21063,32767,-1,-7292,-31946,32117,6492,31311,-9659,-32402,4883,-26120,-19785,-16384,28377,-16384,-28378,-26120,-19785,20429,25618,-7292,31945,32117,6492,-24020,22287,-16384,28377,25100,-21063,31311,9658,11971,-30502,14948,29158,20429,25618,-7292,-31946,25100,-21063,-16384,-28378,31311,9658,32117,6492,-24020,-22288,11971,-30502,-26120,-19785,32767,0,0,0,0,0,0,0,0,0,0,0}; short primary_synch1[144] = {0,0,0,0,0,0,0,0,0,0,32767,0,-31754,-8086,-24020,-22288,2448,32675,-26120,19784,27073,18458,-16384,28377,25100,21062,-29523,14217,-7292,31945,-13477,-29868,-24020,-22288,27073,18458,25100,21062,-16384,-28378,2448,-32676,-26120,19784,-29523,-14218,-7292,31945,-31754,-8086,-16384,28377,-16384,-28378,-31754,-8086,31311,-9659,27073,-18459,-26120,19784,-29523,14217,32767,-1,25100,21062,2448,-32676,31311,-9659,31311,-9659,2448,-32676,25100,21062,32767,0,-29523,14217,-26120,19784,27073,-18459,31311,-9659,-31754,-8086,-16384,-28378,-16384,28377,-31754,-8086,-7292,31945,-29523,-14218,-26120,19784,2448,-32676,-16384,-28378,25100,21062,27073,18458,-24020,-22288,-13477,-29868,-7292,31945,-29523,14217,25100,21062,-16384,28377,27073,18458,-26120,19784,2448,32675,-24020,-22288,-31754,-8086,32767,0,0,0,0,0,0,0,0,0,0,0}; short primary_synch2[144] = {0,0,0,0,0,0,0,0,0,0,32767,0,-31754,8085,-24020,22287,2448,-32676,-26120,-19785,27073,-18459,-16384,-28378,25100,-21063,-29523,-14218,-7292,-31946,-13477,29867,-24020,22287,27073,-18459,25100,-21063,-16384,28377,2448,32675,-26120,-19785,-29523,14217,-7292,-31946,-31754,8085,-16384,-28378,-16384,28377,-31754,8085,31311,9658,27073,18458,-26120,-19785,-29523,-14218,32767,0,25100,-21063,2448,32675,31311,9658,31311,9658,2448,32675,25100,-21063,32767,0,-29523,-14218,-26120,-19785,27073,18458,31311,9658,-31754,8085,-16384,28377,-16384,-28378,-31754,8085,-7292,-31946,-29523,14217,-26120,-19785,2448,32675,-16384,28377,25100,-21063,27073,-18459,-24020,22287,-13477,29867,-7292,-31946,-29523,-14218,25100,-21063,-16384,-28378,27073,-18459,-26120,-19785,2448,-32676,-24020,22287,-31754,8085,32767,-1,0,0,0,0,0,0,0,0,0,0}; diff --git a/openair1/PHY/LTE_TRANSPORT/initial_sync.c b/openair1/PHY/LTE_TRANSPORT/initial_sync.c index 5c6b479b20..b8be6305de 100644 --- a/openair1/PHY/LTE_TRANSPORT/initial_sync.c +++ b/openair1/PHY/LTE_TRANSPORT/initial_sync.c @@ -48,7 +48,7 @@ #include "gain_control.h" #endif -#if defined(OAI_USRP) || defined(EXMIMO) +#if defined(OAI_USRP) || defined(EXMIMO) || defined(OAI_LMSSDR) #include "common_lib.h" extern openair0_config_t openair0_cfg[]; #endif @@ -291,17 +291,10 @@ int initial_sync(PHY_VARS_UE *phy_vars_ue, runmode_t mode) frame_parms->Ncp=NORMAL; frame_parms->frame_type=FDD; init_frame_parms(frame_parms,1); - - // write_output("rxdata0.m","rxd0",phy_vars_ue->lte_ue_common_vars.rxdata[0],10*frame_parms->samples_per_tti,1,1); - - /*#ifdef OAI_USRP - for (aarx = 0; aarxnb_antennas_rx;aarx++) { - rxdata128 = (__m128i*)phy_vars_ue->lte_ue_common_vars.rxdata[aarx]; - for (i=0; i<(frame_parms->samples_per_tti*10)>>2; i++) { - rxdata128[i] = _mm_srai_epi16(rxdata128[i],4); - } - } - #endif*/ + /* + write_output("rxdata0.m","rxd0",phy_vars_ue->lte_ue_common_vars.rxdata[0],10*frame_parms->samples_per_tti,1,1); + exit(-1); + */ sync_pos = lte_sync_time(phy_vars_ue->lte_ue_common_vars.rxdata, frame_parms, (int *)&phy_vars_ue->lte_ue_common_vars.eNb_id); @@ -336,9 +329,11 @@ int initial_sync(PHY_VARS_UE *phy_vars_ue, runmode_t mode) #else #ifndef OAI_USRP - #ifndef OAI_BLADERF +#ifndef OAI_BLADERF +#ifndef OAI_LMSSDR phy_adjust_gain(phy_vars_ue,0); - #endif +#endif +#endif #endif #endif @@ -569,7 +564,7 @@ int initial_sync(PHY_VARS_UE *phy_vars_ue, runmode_t mode) phy_vars_ue->lte_frame_parms.phich_config_common.phich_duration, phich_string[phy_vars_ue->lte_frame_parms.phich_config_common.phich_resource], phy_vars_ue->lte_frame_parms.nb_antennas_tx_eNB); -#if defined(OAI_USRP) || defined(EXMIMO) +#if defined(OAI_USRP) || defined(EXMIMO) || defined(OAI_LMSSDR) LOG_I(PHY,"[UE %d] Frame %d Measured Carrier Frequency %.0f Hz (offset %d Hz)\n", phy_vars_ue->Mod_id, phy_vars_ue->frame_rx, diff --git a/openair1/PHY/LTE_TRANSPORT/print_stats.c b/openair1/PHY/LTE_TRANSPORT/print_stats.c index a386e1cb30..8f6483a3e3 100644 --- a/openair1/PHY/LTE_TRANSPORT/print_stats.c +++ b/openair1/PHY/LTE_TRANSPORT/print_stats.c @@ -50,7 +50,7 @@ #endif extern int mac_get_rrc_status(uint8_t Mod_id,uint8_t eNB_flag,uint8_t index); -#if defined(OAI_USRP) || defined(EXMIMO) || defined(OAI_BLADERF) +#if defined(OAI_USRP) || defined(EXMIMO) || defined(OAI_BLADERF) || defined(OAI_LMSSDR) #include "common_lib.h" extern openair0_config_t openair0_cfg[]; #endif @@ -97,10 +97,10 @@ int dump_ue_stats(PHY_VARS_UE *phy_vars_ue, char* buffer, int length, runmode_t #ifdef EXMIMO len += sprintf(&buffer[len], "[UE PROC] RX Gain %d dB (LNA %d, vga %d dB)\n",phy_vars_ue->rx_total_gain_dB, openair0_cfg[0].rxg_mode[0],(int)openair0_cfg[0].rx_gain[0]); #endif -#if defined(OAI_USRP) || defined(OAI_BLADERF) +#if defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR) len += sprintf(&buffer[len], "[UE PROC] RX Gain %d dB\n",phy_vars_ue->rx_total_gain_dB); #endif -#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) +#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR) len += sprintf(&buffer[len], "[UE_PROC] Frequency offset %d Hz (%d), estimated carrier frequency %f Hz\n",phy_vars_ue->lte_ue_common_vars.freq_offset,openair_daq_vars.freq_offset,openair0_cfg[0].rx_freq[0]-phy_vars_ue->lte_ue_common_vars.freq_offset); #endif len += sprintf(&buffer[len], "[UE PROC] UE mode = %s (%d)\n",mode_string[phy_vars_ue->UE_mode[0]],phy_vars_ue->UE_mode[0]); diff --git a/openair1/SCHED/phy_procedures_lte_ue.c b/openair1/SCHED/phy_procedures_lte_ue.c index bc84beae43..c746fe7254 100755 --- a/openair1/SCHED/phy_procedures_lte_ue.c +++ b/openair1/SCHED/phy_procedures_lte_ue.c @@ -121,7 +121,7 @@ extern int rx_sig_fifo; #endif -#if defined(EXMIMO) || defined(OAI_USRP) +#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR) extern uint32_t downlink_frequency[MAX_NUM_CCs][4]; #endif @@ -197,7 +197,7 @@ void dump_dlsch_SI(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t subframe) exit(-1); } -#if defined(EXMIMO) || defined(OAI_USRP) +#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR) //unsigned int gain_table[31] = {100,112,126,141,158,178,200,224,251,282,316,359,398,447,501,562,631,708,794,891,1000,1122,1258,1412,1585,1778,1995,2239,2512,2818,3162}; /* unsigned int get_tx_amp_prach(int power_dBm, int power_max_dBm, int N_RB_UL) @@ -669,7 +669,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra uint8_t ack_status=0; int8_t Po_PUCCH; int32_t ulsch_start=0; -#if defined(EXMIMO) || defined(OAI_USRP) +#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR) int overflow=0; int k,l; #endif @@ -969,7 +969,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra #endif phy_vars_ue->tx_total_RE = nb_rb*12; -#if defined(EXMIMO) || defined(OAI_USRP) +#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR) tx_amp = get_tx_amp(phy_vars_ue->tx_power_dBm, phy_vars_ue->tx_power_max_dBm, phy_vars_ue->lte_frame_parms.N_RB_UL, @@ -1065,7 +1065,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra #endif phy_vars_ue->tx_total_RE = 12; -#if defined(EXMIMO) || defined(OAI_USRP) +#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR) tx_amp = get_tx_amp(Po_PUCCH, phy_vars_ue->tx_power_max_dBm, phy_vars_ue->lte_frame_parms.N_RB_UL, @@ -1128,7 +1128,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra #endif phy_vars_ue->tx_total_RE = 12; -#if defined(EXMIMO) || defined(OAI_USRP) +#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR) tx_amp = get_tx_amp(Po_PUCCH, phy_vars_ue->tx_power_max_dBm, phy_vars_ue->lte_frame_parms.N_RB_UL, @@ -1230,7 +1230,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra if (abstraction_flag == 0) { nsymb = (frame_parms->Ncp == 0) ? 14 : 12; -#if defined(EXMIMO) || defined(OAI_USRP) //this is the EXPRESS MIMO case +#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)//this is the EXPRESS MIMO case ulsch_start = (phy_vars_ue->rx_offset+subframe_tx*frame_parms->samples_per_tti- openair_daq_vars.timing_advance- phy_vars_ue->timing_advance- @@ -1257,7 +1257,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra for (aa=0; aanb_antennas_tx; aa++) { if (frame_parms->Ncp == 1) PHY_ofdm_mod(&phy_vars_ue->lte_ue_common_vars.txdataF[aa][subframe_tx*nsymb*frame_parms->ofdm_symbol_size], -#if defined(EXMIMO) || defined(OAI_USRP) +#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR) dummy_tx_buffer, #else &phy_vars_ue->lte_ue_common_vars.txdata[aa][ulsch_start], @@ -1268,7 +1268,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra CYCLIC_PREFIX); else normal_prefix_mod(&phy_vars_ue->lte_ue_common_vars.txdataF[aa][subframe_tx*nsymb*frame_parms->ofdm_symbol_size], -#if defined(EXMIMO) || defined(OAI_USRP) +#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR) dummy_tx_buffer, #else &phy_vars_ue->lte_ue_common_vars.txdata[aa][ulsch_start], @@ -1289,7 +1289,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra } */ #ifndef OFDMA_ULSCH -#if defined(EXMIMO) || defined(OAI_USRP) +#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR) apply_7_5_kHz(phy_vars_ue,dummy_tx_buffer,0); apply_7_5_kHz(phy_vars_ue,dummy_tx_buffer,1); #else @@ -1304,7 +1304,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra */ #endif -#if defined(EXMIMO) || defined(OAI_USRP) +#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR) overflow = ulsch_start - 9*frame_parms->samples_per_tti; //if ((slot_tx==4) && (aa==0)) printf("ulsch_start %d, overflow %d\n",ulsch_start,overflow); @@ -1404,7 +1404,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra phy_vars_ue->tx_total_RE = 96; -#if defined(EXMIMO) || defined(OAI_USRP) +#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR) phy_vars_ue->lte_ue_prach_vars[eNB_id]->amp = get_tx_amp(phy_vars_ue->tx_power_dBm, phy_vars_ue->tx_power_max_dBm, phy_vars_ue->lte_frame_parms.N_RB_UL, @@ -1553,9 +1553,11 @@ void lte_ue_measurement_procedures(uint16_t l, PHY_VARS_UE *phy_vars_ue,uint8_t #else #ifndef OAI_USRP - #ifndef OAI_BLADERF +#ifndef OAI_BLADERF +#ifndef OAI_LMSSDR phy_adjust_gain (phy_vars_ue,0); - #endif +#endif +#endif #endif #endif VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_UE_GAIN_CONTROL, VCD_FUNCTION_OUT); diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/CMakeLists.txt b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/CMakeLists.txt new file mode 100644 index 0000000000..88a021ae00 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/CMakeLists.txt @@ -0,0 +1,11 @@ +set(si5351_src_files + Si5351C.cpp +) +set(CMAKE_CXX_FLAGS + "${CMAKE_CXX_FLAGS} ${C_FLAGS_PROCESSOR} -std=c++11 " +) + + +add_library(Si5351C STATIC ${si5351_src_files}) +target_include_directories(Si5351C PUBLIC ../lms7002m ${CMAKE_CURRENT_SOURCE_DIR}) +target_link_libraries(Si5351C LMS7002M) diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/Si5351C.cpp b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/Si5351C.cpp new file mode 100644 index 0000000000..88bcb74f3d --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/Si5351C.cpp @@ -0,0 +1,872 @@ +/** +@file Si5351C.cpp +@author Lime Microsystems +@brief Configuring of Si5351C +*/ + +#include "Si5351C.h" +#include "lmsComms.h" +#include +#include +#include +#include +#include +#include +#include +#include +using namespace std; + +#define Log(msg, type) cout << (msg) << endl; + +/// Splits float into fraction integers A + B/C +void realToFrac(const float real, int &A, int &B, int &C) +{ + A = (int)real; + B = (int)((real - A) * 1048576 + 0.5); + C = 1048576; + + int a = B; + int b = C; + int temp; + while( b!= 0) // greatest common divider + { + temp = a % b; + a = b; + b = temp; + } + B = B/a; + C = C/a; +} + +/// Default configuration +const unsigned char Si5351C::m_defaultConfiguration[] = +{ 0,0x00, + 1,0x00, + 2,0x08, + 3,0x00, + 4,0x00, + 5,0x00, + 6,0x00, + 7,0x00, + 8,0x00, + 9,0x00, + 10,0x00, + 11,0x00, + 12,0x00, + 13,0x00, + 14,0x00, + 15,0x04, + 16,0x4F, + 17,0x4F, + 18,0x4F, + 19,0x4F, + 20,0x4F, + 21,0x4F, + 22,0x0F, + 23,0x0F, + 24,0x00, + 25,0x00, + 26,0x00, + 27,0x80, + 28,0x00, + 29,0x0B, + 30,0x2F, + 31,0x00, + 32,0x00, + 33,0x00, + 34,0x00, + 35,0x00, + 36,0x00, + 37,0x00, + 38,0x00, + 39,0x00, + 40,0x00, + 41,0x00, + 42,0x00, + 43,0x01, + 44,0x00, + 45,0x0D, + 46,0x00, + 47,0x00, + 48,0x00, + 49,0x00, + 50,0x00, + 51,0x01, + 52,0x00, + 53,0x0D, + 54,0x00, + 55,0x00, + 56,0x00, + 57,0x00, + 58,0x00, + 59,0x01, + 60,0x00, + 61,0x0D, + 62,0x00, + 63,0x00, + 64,0x00, + 65,0x00, + 66,0x00, + 67,0x01, + 68,0x00, + 69,0x0D, + 70,0x00, + 71,0x00, + 72,0x00, + 73,0x00, + 74,0x00, + 75,0x01, + 76,0x00, + 77,0x0D, + 78,0x00, + 79,0x00, + 80,0x00, + 81,0x00, + 82,0x00, + 83,0x01, + 84,0x00, + 85,0x0D, + 86,0x00, + 87,0x00, + 88,0x00, + 89,0x00, + 90,0x1E, + 91,0x1E, + 92,0x00, + 93,0x00, + 94,0x00, + 95,0x00, + 96,0x00, + 97,0x00, + 98,0x00, + 99,0x00, +100,0x00, +101,0x00, +102,0x00, +103,0x00, +104,0x00, +105,0x00, +106,0x00, +107,0x00, +108,0x00, +109,0x00, +110,0x00, +111,0x00, +112,0x00, +113,0x00, +114,0x00, +115,0x00, +116,0x00, +117,0x00, +118,0x00, +119,0x00, +120,0x00, +121,0x00, +122,0x00, +123,0x00, +124,0x00, +125,0x00, +126,0x00, +127,0x00, +128,0x00, +129,0x00, +130,0x00, +131,0x00, +132,0x00, +133,0x00, +134,0x00, +135,0x00, +136,0x00, +137,0x00, +138,0x00, +139,0x00, +140,0x00, +141,0x00, +142,0x00, +143,0x00, +144,0x00, +145,0x00, +146,0x00, +147,0x00, +148,0x00, +149,0x00, +150,0x00, +151,0x00, +152,0x00, +153,0x00, +154,0x00, +155,0x00, +156,0x00, +157,0x00, +158,0x00, +159,0x00, +160,0x00, +161,0x00, +162,0x00, +163,0x00, +164,0x00, +165,0x00, +166,0x00, +167,0x00, +168,0x00, +169,0x00, +170,0x00, +171,0x00, +172,0x00, +173,0x00, +174,0x00, +175,0x00, +176,0x00, +177,0x00, +178,0x00, +179,0x00, +180,0x00, +181,0x30, +182,0x00, +183,0xD2, +184,0x60, +185,0x60, +186,0x00, +187,0xC0, +188,0x00, +189,0x00, +190,0x00, +191,0x00, +192,0x00, +193,0x00, +194,0x00, +195,0x00, +196,0x00, +197,0x00, +198,0x00, +199,0x00, +200,0x00, +201,0x00, +202,0x00, +203,0x00, +204,0x00, +205,0x00, +206,0x00, +207,0x00, +208,0x00, +209,0x00, +210,0x00, +211,0x00, +212,0x00, +213,0x00, +214,0x00, +215,0x00, +216,0x00, +217,0x00, +218,0x00, +219,0x00, +220,0x00, +221,0x0D, +222,0x00, +223,0x00, +224,0x00, +225,0x00, +226,0x00, +227,0x00, +228,0x00, +229,0x00, +230,0x00, +231,0x00, +232,0x00}; + +// --------------------------------------------------------------------------- +Si5351C::Si5351C() +{ + memset(m_newConfiguration, 0, 255); + for(unsigned int i=0; iIsOpen() ) + { + return FAILED; + } + LMScomms::TransferStatus status; + status = device->TransferPacket(pkt); + if (status != LMScomms::TRANSFER_SUCCESS || pkt.status != STATUS_COMPLETED_CMD) + { + return FAILED; + } + return SUCCESS; +} + +// --------------------------------------------------------------------------- +/** + @brief Sets connection manager to use for data transferring Si5351C + @param mng connection manager for data transferring +*/ +void Si5351C::Initialize(LMScomms *mng) +{ + assert(mng != nullptr); + device = mng; +} + +/** + @brief Loads register values for Si5356A from file + @param FName input filename +*/ +bool Si5351C::LoadRegValuesFromFile(string FName) +{ + fstream fin; + fin.open(FName.c_str(), ios::in); + + const int len = 1024; + char line[len]; + + int addr; + int value; + + while(!fin.eof()) + { + fin.getline(line, len); + if( line[0] == '#') + continue; + if( strcmp(line, "#END_PROFILE") == 0) + break; + sscanf(line, "%i,%x",&addr,&value); + m_newConfiguration[addr] = value; + } + + fin.close(); + return false; +}; + +/** @brief Calculates multisynth dividers and VCO frequencies + @param clocks output clocks configuration + @param plls plls configurations + @param Fmin lowest VCO frequency + @param Fmax highest VCO frequency +*/ +void Si5351C::FindVCO(Si5351_Channel *clocks, Si5351_PLL *plls, const unsigned long Fmin, const unsigned long Fmax) +{ + int clockCount = 8; + //reset output parameters + for(int i=0; i availableFrequenciesPLLA; //all available frequencies for VCO + map< unsigned long, int> availableFrequenciesPLLB; //all available frequencies for VCO + + //if clk6 or clk7 is used make available frequencies according to them + if(clocks[6].powered || clocks[7].powered) + { + set clk6freqs; + set clk7freqs; + set sharedFreqs; + unsigned int mult = 6; + if(!clk6satisfied) + { + unsigned long freq = clocks[6].outputFreqHz; + while(freq <= Fmax && mult <= 254) + { + freq = clocks[6].outputFreqHz*mult; + if(freq >= Fmin && freq <= Fmax) + { + clk6freqs.insert(freq); + } + mult += 2; + } + } + mult = 6; + if(!clk7satisfied) + { + unsigned long freq = clocks[7].outputFreqHz; + while(freq <= Fmax && mult <= 254) + { + freq = clocks[7].outputFreqHz*mult; + if(freq >= Fmin && freq <= Fmax) + { + clk7freqs.insert(freq); + } + mult += 2; + } + } + bool canShare = false; + //find if clk6 and clk7 can share the same pll + for (set::iterator it6=clk6freqs.begin(); it6!=clk6freqs.end(); ++it6) + { + for (set::iterator it7=clk7freqs.begin(); it7!=clk7freqs.end(); ++it7) + { + if(*it6 == *it7) + { + canShare = true; + sharedFreqs.insert(*it6); + } + } + } + if(canShare) //assign PLLA for both clocks + { + clocks[6].pllSource = 0; + clocks[7].pllSource = 0; + pllAused = true; + for (set::iterator it=sharedFreqs.begin(); it!=sharedFreqs.end(); ++it) + { + availableFrequenciesPLLA.insert( pair (*it, 0) ); + } + clk6satisfied = true; + clk7satisfied = true; + } + else //if clocks 6 and 7 can't share pll, assign pllA to clk6 and pllB to clk7 + { + if(!clk6satisfied) + { + clocks[6].pllSource = 0; + clk6satisfied = true; + pllAused = true; + for (set::iterator it6=clk6freqs.begin(); it6!=clk6freqs.end(); ++it6) + { + availableFrequenciesPLLA.insert( pair(*it6, 0) ); + } + } + if(!clk7satisfied) + { + clocks[7].pllSource = 1; + clk7satisfied = true; + pllBused = true; + for (set::iterator it7=clk7freqs.begin(); it7!=clk7freqs.end(); ++it7) + { + availableFrequenciesPLLB.insert( pair (*it7, 0) ); + } + } + } + } + + //PLLA stage, find all clocks that have integer coefficients with PLLA + //if pllA is not used by clk6 or clk7, fill available frequencies according to clk1-clk5 clocks + if( availableFrequenciesPLLA.size() == 0 && !pllAused) + { + for(int i=0; i<6; ++i) + { + unsigned long freq = clocks[i].outputFreqHz > Fmin ? clocks[i].outputFreqHz : (clocks[i].outputFreqHz*((Fmin/clocks[i].outputFreqHz) + ((Fmin%clocks[i].outputFreqHz)!=0))); + while(freq >= Fmin && freq <= Fmax) + { + //add all output frequency multiples that are in VCO interval + availableFrequenciesPLLA.insert( pair (freq, 0)); + freq += clocks[i].outputFreqHz; + } + } + } + + unsigned int bestScore = 0; //score shows how many outputs have integer dividers + //calculate scores for all available frequencies + unsigned long bestVCOA = 0; + for (map::iterator it=availableFrequenciesPLLA.begin(); it!=availableFrequenciesPLLA.end(); ++it) + { + for(int i=0; i<8; ++i) + { + if(clocks[i].outputFreqHz == 0 || !clocks[i].powered) + continue; + + if( (it->first % clocks[i].outputFreqHz) == 0) + { + it->second = it->second+1; + } + } + if(it->second >= bestScore) + { + bestScore = it->second; + bestVCOA = it->first; + } + } + //scores calculated + //cout << "PLLA stage: " << endl; + //cout << "best score: " << bestScore << " best VCO: " << bestVCOA << endl; + plls[0].VCO_Hz = bestVCOA; + plls[0].feedbackDivider = (double)bestVCOA/plls[0].inputFreqHz; + + for(int i=0; i Fmin ? clocks[i].outputFreqHz : (clocks[i].outputFreqHz*((Fmin/clocks[i].outputFreqHz) + ((Fmin%clocks[i].outputFreqHz)!=0))); + while(freq >= Fmin && freq <= Fmax) + { + availableFrequenciesPLLB.insert( pair (freq, 0)); + freq += clocks[i].outputFreqHz; + } + } + } + + bestScore = 0; + //calculate scores for all available frequencies + unsigned long bestVCOB = 0; + for (map::iterator it=availableFrequenciesPLLB.begin(); it!=availableFrequenciesPLLB.end(); ++it) + { + for(int i=0; i<8; ++i) + { + if(clocks[i].outputFreqHz == 0 || !clocks[i].powered) + continue; + + if( (it->first % clocks[i].outputFreqHz) == 0) + { + it->second = it->second+1; + } + } + if(it->second >= bestScore) + { + bestScore = it->second; + bestVCOB = it->first; + } + } + //scores calculated +// cout << "PLLB stage: " << endl; +// cout << "best score: " << bestScore << " best VCO: " << bestVCOB << endl; + if(bestVCOB == 0) //just in case if pllb is not used make it the same frequency as plla + bestVCOB = bestVCOA; + plls[1].VCO_Hz = bestVCOB; + plls[1].feedbackDivider = (double)bestVCOB/plls[0].inputFreqHz; + for(int i=0; i> 8; + m_newConfiguration[addr+1] = MSX_P3; + + m_newConfiguration[addr+2] = 0; + m_newConfiguration[addr+2] |= (MSX_P1 >> 16 ) & 0x03; + m_newConfiguration[addr+3] = MSX_P1 >> 8; + m_newConfiguration[addr+4] = MSX_P1; + + m_newConfiguration[addr+5] = 0; + m_newConfiguration[addr+5] = (MSX_P2 >> 16) & 0x0F; + m_newConfiguration[addr+5] |= (MSX_P3 >> 16) << 4; + + m_newConfiguration[addr+6] = MSX_P2; + m_newConfiguration[addr+7] = MSX_P2 >> 8; + } + else if( CLK[i].outputFreqHz <= 160000000) // AVAILABLE ONLY ON 0-5 MULTISYNTHS + { + Log("Si5351C - clock configuring for more than 150 MHz not implemented\n", LOG_ERROR); + return FAILED; + } + } + else // CLK6 and CLK7 only integer mode + { + if(CLK[i].outputFreqHz <= 150000000) + { + if(i==6) + { + m_newConfiguration[90] = DivA; + if(DivA%2 != 0) + { + Log("Si5351C - CLK6 multisynth divider is not even integer\n", LOG_ERROR); + return FAILED; + } + } + else + { + m_newConfiguration[91] = DivA; + if(DivA%2 != 0) + { + Log("Si5351C - CLK7 multisynth divider is not even integer\n", LOG_ERROR); + return FAILED; + } + } + } + else if( CLK[i].outputFreqHz <= 160000000) // AVAILABLE ONLY ON 0-5 MULTISYNTHS + { + Log("Si5351C - clock configuring for more than 150 MHz not implemented\n", LOG_ERROR); + return FAILED; + } + } + } + + //configure pll + //set input clk source + m_newConfiguration[15] = m_newConfiguration[15] & 0xF3; + m_newConfiguration[15] |= (PLL[0].CLK_SRC & 1) << 2; + m_newConfiguration[15] |= (PLL[1].CLK_SRC & 1) << 3; + for(int i=0; i<2; ++i) + { + addr = 26+i*8; + if(PLL[i].feedbackDivider < 15 || PLL[i].feedbackDivider > 90) + { + Log("Si5351C - VCO frequency divider out of range [15:90].\n", LOG_ERROR); + return FAILED; + } + if( PLL[i].VCO_Hz < 600000000 || PLL[i].VCO_Hz > 900000000) + { + Log("Si5351C - Can't calculate valid VCO frequency.\n", LOG_ERROR); + return FAILED; + } + ss.clear(); + ss.str(string()); + ss << "Si5351C : VCO" << (i==0 ? "A" : "B") << " = " << PLL[i].VCO_Hz/1000000.0 << " MHz"; + + //calculate MSNx_P1, MSNx_P2, MSNx_P3 + int MSNx_P1; + int MSNx_P2; + int MSNx_P3; + + int DivA; + int DivB; + int DivC; + realToFrac(PLL[i].feedbackDivider, DivA, DivB, DivC); + ss << " Feedback Divider " << DivA << " " << DivB << "/" << DivC << endl; + Log(ss.str(), LOG_INFO); + + MSNx_P1 = 128 * DivA + floor(128 * ( (float)DivB/DivC)) - 512; + MSNx_P2 = 128 * DivB - DivC * floor( 128 * DivB/DivC ); + MSNx_P3 = DivC; + + m_newConfiguration[addr+4] = MSNx_P1; + m_newConfiguration[addr+3] = MSNx_P1 >> 8; + m_newConfiguration[addr+2] = MSNx_P1 >> 16; + + m_newConfiguration[addr+7] = MSNx_P2; + m_newConfiguration[addr+6] = MSNx_P2 >> 8; + m_newConfiguration[addr+5] = 0; + m_newConfiguration[addr+5] = (MSNx_P2 >> 16) & 0x0F; + + m_newConfiguration[addr+5] |= (MSNx_P3 >> 16) << 4; + m_newConfiguration[addr+1] |= MSNx_P3; + m_newConfiguration[addr] |= MSNx_P3 >> 8; + } + return SUCCESS; +} + +/** @brief Sets output clock parameters + @param id clock id 0-CLK0 1-CLK1 ... + @param fOut_Hz output frequency in Hz + @param enabled is this output powered + @param inverted invert clock +*/ +void Si5351C::SetClock(unsigned char id, unsigned long fOut_Hz, bool enabled, bool inverted) +{ + if( id < 8) + { + if(fOut_Hz < 8000 || fOut_Hz > 160000000) + { + stringstream ss; + ss << "Si5351C - CLK" << (int)id << " output frequency must be between 8kHz and 160MHz. fOut_MHz = " << fOut_Hz/1000000.0 << endl; + Log(ss.str(), LOG_ERROR); + return; + } + CLK[id].powered = enabled; + CLK[id].inverted = inverted; + CLK[id].outputFreqHz = fOut_Hz; + } +} + +/** @brief Sets PLL input frequency + @param id PLL id 0-PLLA 1-PLLB + @param CLKIN_Hz clock input in Hz +*/ +void Si5351C::SetPLL(unsigned char id, unsigned long CLKIN_Hz, int CLK_SRC) +{ + if (id < 2) + { + PLL[id].inputFreqHz = CLKIN_Hz; + PLL[id].CLK_SRC = CLK_SRC; + } +} + +/** @brief Resets configuration registers to default values +*/ +void Si5351C::Reset() +{ + memset(m_newConfiguration, 0, 255); + for(unsigned int i=0; iTransferPacket(pkt); + if (status != LMScomms::TRANSFER_SUCCESS || pkt.status != STATUS_COMPLETED_CMD) + { + return stat; + } + + stat.sys_init = (pkt.inBuffer[0] >> 7); + stat.lol_b = (pkt.inBuffer[0] >> 6) & 0x1; + stat.lol_a = (pkt.inBuffer[0] >> 5) & 0x1; + stat.los = (pkt.inBuffer[0] >> 4) & 0x1; + stat.sys_init_stky = (pkt.inBuffer[1] >> 7); + stat.lol_b_stky = (pkt.inBuffer[1] >> 6) & 0x1; + stat.lol_a_stky = (pkt.inBuffer[1] >> 5) & 0x1; + stat.los_stky = (pkt.inBuffer[1] >> 4) & 0x1; + return stat; +} + +Si5351C::Status Si5351C::ClearStatus() +{ + LMScomms::GenericPacket pkt; + pkt.cmd = CMD_SI5351_WR; + pkt.outBuffer.push_back(1); + pkt.outBuffer.push_back(0x0); + LMScomms::TransferStatus status; + status = device->TransferPacket(pkt); + if (status != LMScomms::TRANSFER_SUCCESS || pkt.status != STATUS_COMPLETED_CMD) + return FAILED; + return SUCCESS; +} diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/Si5351C.h b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/Si5351C.h new file mode 100644 index 0000000000..971a2d1d69 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/Si5351C.h @@ -0,0 +1,100 @@ +/** +@file Si5351C.h +@brief Header for Si5351C.cpp +@author Lime Microsystems +*/ + +#ifndef SI5351C_MODULE +#define SI5351C_MODULE + +#include +#include +using namespace std; +//--------------------------------------------------------------------------- + +enum eSi_CLOCK_INPUT +{ + Si_CLKIN, + Si_XTAL, + Si_CMOS +}; + +struct Si5351_Channel +{ + Si5351_Channel() : outputDivider(1), outputFreqHz(1), multisynthDivider(1), pllSource(0), + phaseOffset(0), powered(true), inverted(false), int_mode(false) {}; + int outputDivider; + unsigned long outputFreqHz; + float multisynthDivider; + int pllSource; + float phaseOffset; + bool powered; + bool inverted; + bool int_mode; +}; + +struct Si5351_PLL +{ + Si5351_PLL() : inputFreqHz(0), VCO_Hz(0), feedbackDivider(0), CLKIN_DIV(1), CLK_SRC(1) {} + unsigned long inputFreqHz; + float VCO_Hz; + float feedbackDivider; + int CLKIN_DIV; + int CLK_SRC; //0-XTAL, 1-CLKIN +}; + +class LMScomms; +class Si5351C +{ +public: + enum Status + { + SUCCESS, + FAILED, + }; + + struct StatusBits + { + StatusBits() : sys_init(0), sys_init_stky(0), lol_b(0), lol_b_stky(0), lol_a(0), lol_a_stky(0), los(0), los_stky(0) + { + + } + int sys_init; + int sys_init_stky; + int lol_b; + int lol_b_stky; + int lol_a; + int lol_a_stky; + int los; + int los_stky; + }; + + StatusBits GetStatusBits(); + Status ClearStatus(); + + Si5351C(); + ~Si5351C(); + void Initialize(LMScomms *mng); + bool LoadRegValuesFromFile(string FName); + + void SetPLL(unsigned char id, unsigned long CLKIN_Hz, int CLK_SRC); + void SetClock(unsigned char id, unsigned long fOut_Hz, bool enabled = true, bool inverted = false); + + Status UploadConfiguration(); + Status ConfigureClocks(); + void Reset(); + +private: + void FindVCO(Si5351_Channel *clocks, Si5351_PLL *plls, const unsigned long Fmin, const unsigned long Fmax); + LMScomms *device; + + Si5351_PLL PLL[2]; + Si5351_Channel CLK[8]; + + static const unsigned char m_defaultConfiguration[]; + unsigned char m_newConfiguration[255]; + + +}; + +#endif // SI5351C_MODULE diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeCache.txt b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeCache.txt new file mode 100644 index 0000000000..2bd212843c --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeCache.txt @@ -0,0 +1,326 @@ +# This is the CMakeCache file. +# For build in directory: /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build +# It was generated by CMake: /usr/bin/cmake +# You can edit this file to change values found and used by cmake. +# If you do not want to change any of the values, simply exit the editor. +# If you do want to change a value, simply edit, save, and exit the editor. +# The syntax for the file is as follows: +# KEY:TYPE=VALUE +# KEY is the name of a variable in the cache. +# TYPE is a hint to GUIs for the type of VALUE, DO NOT EDIT TYPE!. +# VALUE is the current value for the KEY. + +######################## +# EXTERNAL cache entries +######################## + +//Path to a program. +CMAKE_AR:FILEPATH=/usr/bin/ar + +//For backwards compatibility, what version of CMake commands and +// syntax should this version of CMake try to support. +CMAKE_BACKWARDS_COMPATIBILITY:STRING=2.4 + +//Choose the type of build, options are: None(CMAKE_CXX_FLAGS or +// CMAKE_C_FLAGS used) Debug Release RelWithDebInfo MinSizeRel. +CMAKE_BUILD_TYPE:STRING= + +//Enable/Disable color output during build. +CMAKE_COLOR_MAKEFILE:BOOL=ON + +//CXX compiler. +CMAKE_CXX_COMPILER:FILEPATH=/usr/bin/c++ + +//Flags used by the compiler during all build types. +CMAKE_CXX_FLAGS:STRING= + +//Flags used by the compiler during debug builds. +CMAKE_CXX_FLAGS_DEBUG:STRING=-g + +//Flags used by the compiler during release minsize builds. +CMAKE_CXX_FLAGS_MINSIZEREL:STRING=-Os -DNDEBUG + +//Flags used by the compiler during release builds (/MD /Ob1 /Oi +// /Ot /Oy /Gs will produce slightly less optimized but smaller +// files). +CMAKE_CXX_FLAGS_RELEASE:STRING=-O3 -DNDEBUG + +//Flags used by the compiler during Release with Debug Info builds. +CMAKE_CXX_FLAGS_RELWITHDEBINFO:STRING=-O2 -g -DNDEBUG + +//C compiler. +CMAKE_C_COMPILER:FILEPATH=/usr/bin/cc + +//Flags used by the compiler during all build types. +CMAKE_C_FLAGS:STRING= + +//Flags used by the compiler during debug builds. +CMAKE_C_FLAGS_DEBUG:STRING=-g + +//Flags used by the compiler during release minsize builds. +CMAKE_C_FLAGS_MINSIZEREL:STRING=-Os -DNDEBUG + +//Flags used by the compiler during release builds (/MD /Ob1 /Oi +// /Ot /Oy /Gs will produce slightly less optimized but smaller +// files). +CMAKE_C_FLAGS_RELEASE:STRING=-O3 -DNDEBUG + +//Flags used by the compiler during Release with Debug Info builds. +CMAKE_C_FLAGS_RELWITHDEBINFO:STRING=-O2 -g -DNDEBUG + +//Flags used by the linker. +CMAKE_EXE_LINKER_FLAGS:STRING=' ' + +//Flags used by the linker during debug builds. +CMAKE_EXE_LINKER_FLAGS_DEBUG:STRING= + +//Flags used by the linker during release minsize builds. +CMAKE_EXE_LINKER_FLAGS_MINSIZEREL:STRING= + +//Flags used by the linker during release builds. +CMAKE_EXE_LINKER_FLAGS_RELEASE:STRING= + +//Flags used by the linker during Release with Debug Info builds. +CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO:STRING= + +//Enable/Disable output of compile commands during generation. +CMAKE_EXPORT_COMPILE_COMMANDS:BOOL=OFF + +//Install path prefix, prepended onto install directories. +CMAKE_INSTALL_PREFIX:PATH=/usr/local + +//Path to a program. +CMAKE_LINKER:FILEPATH=/usr/bin/ld + +//Path to a program. +CMAKE_MAKE_PROGRAM:FILEPATH=/usr/bin/make + +//Flags used by the linker during the creation of modules. +CMAKE_MODULE_LINKER_FLAGS:STRING=' ' + +//Flags used by the linker during debug builds. +CMAKE_MODULE_LINKER_FLAGS_DEBUG:STRING= + +//Flags used by the linker during release minsize builds. +CMAKE_MODULE_LINKER_FLAGS_MINSIZEREL:STRING= + +//Flags used by the linker during release builds. +CMAKE_MODULE_LINKER_FLAGS_RELEASE:STRING= + +//Flags used by the linker during Release with Debug Info builds. +CMAKE_MODULE_LINKER_FLAGS_RELWITHDEBINFO:STRING= + +//Path to a program. +CMAKE_NM:FILEPATH=/usr/bin/nm + +//Path to a program. +CMAKE_OBJCOPY:FILEPATH=/usr/bin/objcopy + +//Path to a program. +CMAKE_OBJDUMP:FILEPATH=/usr/bin/objdump + +//Value Computed by CMake +CMAKE_PROJECT_NAME:STATIC=Project + +//Path to a program. +CMAKE_RANLIB:FILEPATH=/usr/bin/ranlib + +//Flags used by the linker during the creation of dll's. +CMAKE_SHARED_LINKER_FLAGS:STRING=' ' + +//Flags used by the linker during debug builds. +CMAKE_SHARED_LINKER_FLAGS_DEBUG:STRING= + +//Flags used by the linker during release minsize builds. +CMAKE_SHARED_LINKER_FLAGS_MINSIZEREL:STRING= + +//Flags used by the linker during release builds. +CMAKE_SHARED_LINKER_FLAGS_RELEASE:STRING= + +//Flags used by the linker during Release with Debug Info builds. +CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO:STRING= + +//If set, runtime paths are not added when installing shared libraries, +// but are added when building. +CMAKE_SKIP_INSTALL_RPATH:BOOL=NO + +//If set, runtime paths are not added when using shared libraries. +CMAKE_SKIP_RPATH:BOOL=NO + +//Flags used by the linker during the creation of static libraries. +CMAKE_STATIC_LINKER_FLAGS:STRING= + +//Flags used by the linker during debug builds. +CMAKE_STATIC_LINKER_FLAGS_DEBUG:STRING= + +//Flags used by the linker during release minsize builds. +CMAKE_STATIC_LINKER_FLAGS_MINSIZEREL:STRING= + +//Flags used by the linker during release builds. +CMAKE_STATIC_LINKER_FLAGS_RELEASE:STRING= + +//Flags used by the linker during Release with Debug Info builds. +CMAKE_STATIC_LINKER_FLAGS_RELWITHDEBINFO:STRING= + +//Path to a program. +CMAKE_STRIP:FILEPATH=/usr/bin/strip + +//If true, cmake will use relative paths in makefiles and projects. +CMAKE_USE_RELATIVE_PATHS:BOOL=OFF + +//If this value is on, makefiles will be generated without the +// .SILENT directive, and all commands will be echoed to the console +// during the make. This is useful for debugging only. With Visual +// Studio IDE projects all commands are done without /nologo. +CMAKE_VERBOSE_MAKEFILE:BOOL=FALSE + +//Single output directory for building all executables. +EXECUTABLE_OUTPUT_PATH:PATH= + +//Single output directory for building all libraries. +LIBRARY_OUTPUT_PATH:PATH= + +//Value Computed by CMake +Project_BINARY_DIR:STATIC=/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build + +//Value Computed by CMake +Project_SOURCE_DIR:STATIC=/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C + +//Dependencies for the target +Si5351C_LIB_DEPENDS:STATIC=general;LMS7002M; + + +######################## +# INTERNAL cache entries +######################## + +//ADVANCED property for variable: CMAKE_AR +CMAKE_AR-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_BUILD_TOOL +CMAKE_BUILD_TOOL-ADVANCED:INTERNAL=1 +//What is the target build tool cmake is generating for. +CMAKE_BUILD_TOOL:INTERNAL=/usr/bin/make +//This is the directory where this CMakeCache.txt was created +CMAKE_CACHEFILE_DIR:INTERNAL=/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build +//Major version of cmake used to create the current loaded cache +CMAKE_CACHE_MAJOR_VERSION:INTERNAL=2 +//Minor version of cmake used to create the current loaded cache +CMAKE_CACHE_MINOR_VERSION:INTERNAL=8 +//Patch version of cmake used to create the current loaded cache +CMAKE_CACHE_PATCH_VERSION:INTERNAL=12 +//ADVANCED property for variable: CMAKE_COLOR_MAKEFILE +CMAKE_COLOR_MAKEFILE-ADVANCED:INTERNAL=1 +//Path to CMake executable. +CMAKE_COMMAND:INTERNAL=/usr/bin/cmake +//Path to cpack program executable. +CMAKE_CPACK_COMMAND:INTERNAL=/usr/bin/cpack +//Path to ctest program executable. +CMAKE_CTEST_COMMAND:INTERNAL=/usr/bin/ctest +//ADVANCED property for variable: CMAKE_CXX_COMPILER +CMAKE_CXX_COMPILER-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_CXX_FLAGS +CMAKE_CXX_FLAGS-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_CXX_FLAGS_DEBUG +CMAKE_CXX_FLAGS_DEBUG-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_CXX_FLAGS_MINSIZEREL +CMAKE_CXX_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_CXX_FLAGS_RELEASE +CMAKE_CXX_FLAGS_RELEASE-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_CXX_FLAGS_RELWITHDEBINFO +CMAKE_CXX_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_C_COMPILER +CMAKE_C_COMPILER-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_C_FLAGS +CMAKE_C_FLAGS-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_C_FLAGS_DEBUG +CMAKE_C_FLAGS_DEBUG-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_C_FLAGS_MINSIZEREL +CMAKE_C_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_C_FLAGS_RELEASE +CMAKE_C_FLAGS_RELEASE-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_C_FLAGS_RELWITHDEBINFO +CMAKE_C_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1 +//Path to cache edit program executable. +CMAKE_EDIT_COMMAND:INTERNAL=/usr/bin/ccmake +//Executable file format +CMAKE_EXECUTABLE_FORMAT:INTERNAL=ELF +//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS +CMAKE_EXE_LINKER_FLAGS-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS_DEBUG +CMAKE_EXE_LINKER_FLAGS_DEBUG-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS_MINSIZEREL +CMAKE_EXE_LINKER_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS_RELEASE +CMAKE_EXE_LINKER_FLAGS_RELEASE-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO +CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_EXPORT_COMPILE_COMMANDS +CMAKE_EXPORT_COMPILE_COMMANDS-ADVANCED:INTERNAL=1 +//Name of generator. +CMAKE_GENERATOR:INTERNAL=Unix Makefiles +//Name of generator toolset. +CMAKE_GENERATOR_TOOLSET:INTERNAL= +//Start directory with the top level CMakeLists.txt file for this +// project +CMAKE_HOME_DIRECTORY:INTERNAL=/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C +//Install .so files without execute permission. +CMAKE_INSTALL_SO_NO_EXE:INTERNAL=1 +//ADVANCED property for variable: CMAKE_LINKER +CMAKE_LINKER-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_MAKE_PROGRAM +CMAKE_MAKE_PROGRAM-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS +CMAKE_MODULE_LINKER_FLAGS-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS_DEBUG +CMAKE_MODULE_LINKER_FLAGS_DEBUG-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS_MINSIZEREL +CMAKE_MODULE_LINKER_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS_RELEASE +CMAKE_MODULE_LINKER_FLAGS_RELEASE-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS_RELWITHDEBINFO +CMAKE_MODULE_LINKER_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_NM +CMAKE_NM-ADVANCED:INTERNAL=1 +//number of local generators +CMAKE_NUMBER_OF_LOCAL_GENERATORS:INTERNAL=1 +//ADVANCED property for variable: CMAKE_OBJCOPY +CMAKE_OBJCOPY-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_OBJDUMP +CMAKE_OBJDUMP-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_RANLIB +CMAKE_RANLIB-ADVANCED:INTERNAL=1 +//Path to CMake installation. +CMAKE_ROOT:INTERNAL=/usr/share/cmake-2.8 +//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS +CMAKE_SHARED_LINKER_FLAGS-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS_DEBUG +CMAKE_SHARED_LINKER_FLAGS_DEBUG-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS_MINSIZEREL +CMAKE_SHARED_LINKER_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS_RELEASE +CMAKE_SHARED_LINKER_FLAGS_RELEASE-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO +CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_SKIP_INSTALL_RPATH +CMAKE_SKIP_INSTALL_RPATH-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_SKIP_RPATH +CMAKE_SKIP_RPATH-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS +CMAKE_STATIC_LINKER_FLAGS-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS_DEBUG +CMAKE_STATIC_LINKER_FLAGS_DEBUG-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS_MINSIZEREL +CMAKE_STATIC_LINKER_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS_RELEASE +CMAKE_STATIC_LINKER_FLAGS_RELEASE-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS_RELWITHDEBINFO +CMAKE_STATIC_LINKER_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_STRIP +CMAKE_STRIP-ADVANCED:INTERNAL=1 +//uname command +CMAKE_UNAME:INTERNAL=/bin/uname +//ADVANCED property for variable: CMAKE_USE_RELATIVE_PATHS +CMAKE_USE_RELATIVE_PATHS-ADVANCED:INTERNAL=1 +//ADVANCED property for variable: CMAKE_VERBOSE_MAKEFILE +CMAKE_VERBOSE_MAKEFILE-ADVANCED:INTERNAL=1 + diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CMakeCCompiler.cmake b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CMakeCCompiler.cmake new file mode 100644 index 0000000000..f4a508bee8 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CMakeCCompiler.cmake @@ -0,0 +1,56 @@ +set(CMAKE_C_COMPILER "/usr/bin/cc") +set(CMAKE_C_COMPILER_ARG1 "") +set(CMAKE_C_COMPILER_ID "GNU") +set(CMAKE_C_COMPILER_VERSION "4.8.4") +set(CMAKE_C_PLATFORM_ID "Linux") + +set(CMAKE_AR "/usr/bin/ar") +set(CMAKE_RANLIB "/usr/bin/ranlib") +set(CMAKE_LINKER "/usr/bin/ld") +set(CMAKE_COMPILER_IS_GNUCC 1) +set(CMAKE_C_COMPILER_LOADED 1) +set(CMAKE_C_COMPILER_WORKS TRUE) +set(CMAKE_C_ABI_COMPILED TRUE) +set(CMAKE_COMPILER_IS_MINGW ) +set(CMAKE_COMPILER_IS_CYGWIN ) +if(CMAKE_COMPILER_IS_CYGWIN) + set(CYGWIN 1) + set(UNIX 1) +endif() + +set(CMAKE_C_COMPILER_ENV_VAR "CC") + +if(CMAKE_COMPILER_IS_MINGW) + set(MINGW 1) +endif() +set(CMAKE_C_COMPILER_ID_RUN 1) +set(CMAKE_C_SOURCE_FILE_EXTENSIONS c) +set(CMAKE_C_IGNORE_EXTENSIONS h;H;o;O;obj;OBJ;def;DEF;rc;RC) +set(CMAKE_C_LINKER_PREFERENCE 10) + +# Save compiler ABI information. +set(CMAKE_C_SIZEOF_DATA_PTR "8") +set(CMAKE_C_COMPILER_ABI "ELF") +set(CMAKE_C_LIBRARY_ARCHITECTURE "x86_64-linux-gnu") + +if(CMAKE_C_SIZEOF_DATA_PTR) + set(CMAKE_SIZEOF_VOID_P "${CMAKE_C_SIZEOF_DATA_PTR}") +endif() + +if(CMAKE_C_COMPILER_ABI) + set(CMAKE_INTERNAL_PLATFORM_ABI "${CMAKE_C_COMPILER_ABI}") +endif() + +if(CMAKE_C_LIBRARY_ARCHITECTURE) + set(CMAKE_LIBRARY_ARCHITECTURE "x86_64-linux-gnu") +endif() + + + + +set(CMAKE_C_IMPLICIT_LINK_LIBRARIES "c") +set(CMAKE_C_IMPLICIT_LINK_DIRECTORIES "/usr/lib/gcc/x86_64-linux-gnu/4.8;/usr/lib/x86_64-linux-gnu;/usr/lib;/lib/x86_64-linux-gnu;/lib") +set(CMAKE_C_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES "") + + + diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CMakeCXXCompiler.cmake b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CMakeCXXCompiler.cmake new file mode 100644 index 0000000000..1ca40dbcd6 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CMakeCXXCompiler.cmake @@ -0,0 +1,57 @@ +set(CMAKE_CXX_COMPILER "/usr/bin/c++") +set(CMAKE_CXX_COMPILER_ARG1 "") +set(CMAKE_CXX_COMPILER_ID "GNU") +set(CMAKE_CXX_COMPILER_VERSION "4.8.4") +set(CMAKE_CXX_PLATFORM_ID "Linux") + +set(CMAKE_AR "/usr/bin/ar") +set(CMAKE_RANLIB "/usr/bin/ranlib") +set(CMAKE_LINKER "/usr/bin/ld") +set(CMAKE_COMPILER_IS_GNUCXX 1) +set(CMAKE_CXX_COMPILER_LOADED 1) +set(CMAKE_CXX_COMPILER_WORKS TRUE) +set(CMAKE_CXX_ABI_COMPILED TRUE) +set(CMAKE_COMPILER_IS_MINGW ) +set(CMAKE_COMPILER_IS_CYGWIN ) +if(CMAKE_COMPILER_IS_CYGWIN) + set(CYGWIN 1) + set(UNIX 1) +endif() + +set(CMAKE_CXX_COMPILER_ENV_VAR "CXX") + +if(CMAKE_COMPILER_IS_MINGW) + set(MINGW 1) +endif() +set(CMAKE_CXX_COMPILER_ID_RUN 1) +set(CMAKE_CXX_IGNORE_EXTENSIONS inl;h;hpp;HPP;H;o;O;obj;OBJ;def;DEF;rc;RC) +set(CMAKE_CXX_SOURCE_FILE_EXTENSIONS C;M;c++;cc;cpp;cxx;m;mm;CPP) +set(CMAKE_CXX_LINKER_PREFERENCE 30) +set(CMAKE_CXX_LINKER_PREFERENCE_PROPAGATES 1) + +# Save compiler ABI information. +set(CMAKE_CXX_SIZEOF_DATA_PTR "8") +set(CMAKE_CXX_COMPILER_ABI "ELF") +set(CMAKE_CXX_LIBRARY_ARCHITECTURE "x86_64-linux-gnu") + +if(CMAKE_CXX_SIZEOF_DATA_PTR) + set(CMAKE_SIZEOF_VOID_P "${CMAKE_CXX_SIZEOF_DATA_PTR}") +endif() + +if(CMAKE_CXX_COMPILER_ABI) + set(CMAKE_INTERNAL_PLATFORM_ABI "${CMAKE_CXX_COMPILER_ABI}") +endif() + +if(CMAKE_CXX_LIBRARY_ARCHITECTURE) + set(CMAKE_LIBRARY_ARCHITECTURE "x86_64-linux-gnu") +endif() + + + + +set(CMAKE_CXX_IMPLICIT_LINK_LIBRARIES "stdc++;m;c") +set(CMAKE_CXX_IMPLICIT_LINK_DIRECTORIES "/usr/lib/gcc/x86_64-linux-gnu/4.8;/usr/lib/x86_64-linux-gnu;/usr/lib;/lib/x86_64-linux-gnu;/lib") +set(CMAKE_CXX_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES "") + + + diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CMakeDetermineCompilerABI_C.bin b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CMakeDetermineCompilerABI_C.bin new file mode 100755 index 0000000000000000000000000000000000000000..3458fc29190dbceb43a4fb44955cbce374660b02 GIT binary patch literal 8587 zcmeHMeQZAT{-bS~SDQ*aX8BoV_62l85z-ZELW9f?%JH)MHGy9pZ zK^rXv)oSU`Hf;=5Ra^BBGm> z{PK|4rtL4T<#*2c-E;0a_rCk_?!Ax4y4HC;9>K{gzAQ*OT%$?IdP1HpMTJE~ozTQ0 zu|U)Ssm5QEIYcdv>7*)}sbA^&K&$YNcr75})g;4op#=-393fHiS5BH@E&6PoB{CHv zBmuIcSc3s6g7!;>X`_mxSy8qlk?b0kU8AyNdRhg>l1z>ea))f7~UTa~|?waYbCKc-3)_oY(e~PG>vP}T zH*@t5XS}@e+{B-Mf9|=KfiqX%{^nN~KJxg{eZM?(Juq|b+2_U^s>d(?@jdl6VeCjv zkV6iP#2NU{altddLN54EZh{}b3I289LD3*0!G3V%6bDOqqXU0d;&%znfe!)?x#;f) zK3miaP4y%0H%|kfBW8(-S`C~KN%<6FJ1F5i4=7l?046BznieO$SJL0F%2}ffejxD~ zB2uF%#3FY~e3ocd@u*=UI)PK1TNM6jW%UKA9}ukySFjN1hlAAZRtm!)-pHHroN0{2 zQyE4E^95rll}QPsv!~lgBy-8_sl1uY^>nwVvzcU1d?1|^smxH;$fx!uvqMH=hnW*b zG7&f9D1(SqDunGL*^F{wpuElC6RC_*$R`tackpJSgbaZL`8=C%*lBE4&fC-Rd_I}C zVsedWeOG5&yU`ME39qnf%WdSr$a4SDn4_OHF374dKZRl96=$p>#AJQHcKm7ZUn`3A6gbawzL#ulY}qRXLSbya<)jJul%|zgPoD z@-Qh}e5ZtT&ry;oYmg3o0A0?|B4j#1Alorg?7fppQxA)Z$Rt@NvPWN5>7EJ0Fi;H72`asvc z=a-$)kALi=H+CWRNvWhCxN0t9`>x`puHuIsD5Es@FZ$RCkG|@1;S#;bZGF*iMEjx- zM~xFhLt)l`AMaPbd-bY46}?4>&Q0q!ueJ@NZOxHB3ycq>w&7!=4}EljZ%s2|ug3q% z$EDIf(1i%B3$zZ+@)Bql=xd$JL zK_z#6A(kMY^oOBOF^E8LU7%q@{fu4yQL%RZnx)H^e3oF+>A=4aaml$X8VDZrw$G~B z3CAig0XmBOB&cW$1i#~r1sb05#R8#2Rk1+h)75&Q`CyG6h>X>C2efn`5)Cv*1C4Eg zP+On@`fUNftk=shKZbJb3;?#HD zEG6^z*Rz^xR-%{fIe|}QRl6=Ig5t-WaO;lMjeZNqe^lC)J z9r7u}yNc5HI;94S2>y;#V)@$#p97S5?v-l-WL`gNWv&o+D(bJ%B**x*YD?z0*&ppq zD6x#`UDoHc(#NtUWp2-FN zqivl{W_-Jnwr2|AfkFy<&{RT%Ng9slhebHCCxh}ViVu02voo2?r?Qy}!9ZRvnU0fz z;&!A>5tbkCVKccKyxcd0b6L3;2q%Y)p_Ii&Y{v2O>O}9T`bxOlKSaCo+vQ>QmgGBVG+s`J9EvnFR6R{>Sp?z);_2 z`yQ_bseFzRl2Z9mRc0l(3{Shg>D44|ssfitsr+!-cOdISj0N_8#H&f=BMRu3Qh7e$ zai?Ih2@H*Wwx9HBkZ7KeM7*vlO!Eh^Y|rELL147cVSAo$CRCvBBF~7AS zkLP3bv5WM1i%iXDtjF|GIrJL6Zd*b9b2WqY2Vt|@!2rxK^t{|SdZ z&v$+`;qv@Q_Ou2#+wU1*)Fw)OYJG?(faiUv$fTN;MNtH2x9_jfWM03+KN|!U!}R-* z?e=_raah^E=y+jl$K@S$*z*e_q*h`}28=rtFuqp`uRz#~k*2?#JhW ztqyyq|5qIL$FOarbWHjGKuYC@f~SB9aCA6EV}KH`-+Vsk)OX5nz@{F5w&(S|feJ-( z>O1APp+m2T?P=#sDRhhWe}yi+YPRR~jn8lSoK|&*sd)H3{2jJ-|9oCDNtHr!#>+C( z%h0jg3-x^=4=Rz@NQKxE+cBm0W4GsXzeW`x$H_&o9m^kqA&l!!#~qX+%FwA#zU-+4 zfv{#f2%hb`9XQ)FrE3EAZC5?O{#j9FIz;K4$Bx}Ts6Hs0)r-3unG_?}hvzjKpKkuO z#a3w>9fdpnTUzcp>-chv0d>5}$rQ6r}w)9=jZDl#-^XSTQf>ZY$mH2GT zW11b3ybmYOJWts(ed1G7`-@6^F6NVdJ0y7@b_qOR*fV`%-qg8iC5~MIk8fLs&*l7` zvVAV+<`(W;6|FH?C9czOtVp!xdayfj#!th;D{zjl)=M@DEBu-Rk1E``&wB{C#}+4# zk0FUqZ_h)joGrB)xN`atSdYtl83*oGFIqP|SUKpJlaiY5fw}9y1>A$1f+KYrxNHTD$Y^dq|@Lp98&%@Fk9xEh1z5i?kPWLFz zdy#FxLu_oLyCgpSe(2l4-R@Do2i)zR=_v3yXm$SHVHeL!oTV~-Rh7f*6X(1EJj8;H zo&oN5|8xns+x^o=!0DbzbF_a+>GO9TyQsmu?shLV2e{k4)SbZH;{4)G@R%&eWj-9t znR&B-6Y@b^^=xS0YIJoz&|?^)e9dH-BgPFhu}Z6wTWE^ovO zy9IWHJJLxrnFz03^`+$~*+og-X<0i>+%%cFJ;K_XCJG}XdthRd4BFCGsJ3^uh&&H@&#CuKb*rf|_Q( YSNpGT_qcN9OFrx7@!z`XldUEG1u+4vi~s-t literal 0 HcmV?d00001 diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CMakeDetermineCompilerABI_CXX.bin b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CMakeDetermineCompilerABI_CXX.bin new file mode 100755 index 0000000000000000000000000000000000000000..ea701432becf6a6bd7cb452c08f7c7645d0f8607 GIT binary patch literal 8600 zcmeHMeQZH?|!^{&+{FjPN%~GoSg7=Aa0;c5s>i&II=*n67xePD6kBc zKp7&X_*X;;Q6tB6R+?s7A>~|1OYrY^8i3!ahz!%E1`JHOhD6C{d=XoUZ;W_@d^=W7taDE zSxTEP=n=}dOGE7y3c<)5v_)_LOj++q)T4UdYw}3J9_jCH{c=sVkEvwg@px>owdL`6 zq#+(lWX2oD{jCkHExvTp*DTsi_DOdA#y;VR`>_@|s&ftgX$(;Lsz112xwG!!%`@9i zpWL2qe)9TfAD^Q#Y7gm^Wd3(bK%p{v)#RtGy?XhNf0u6(6>U-jVqP13 z9%2h^@P5R+Hux)d!QZ$G-i5daYQgUrz+541#w_9W7W|OF7lC5Idl2{9$j1?10M+1; zMC48Vvk%&Q#Ao0MWIrXIXO7h*(&RVH;P~h{xW3ls) zlm}TKIZfbUfxDqZ;?fKNj<+EiUag>Ml-JUFIHhZ&;aGx^p>#$YjwNECb@g^@k!UKq zE0)%ysow5jJei30h6m$O(4vvB9!3=+h7n|TjV2S)qK4|5FdvB}v`ji0F%*D!1-eLGkU-%F~&O~nZ+?2 z{!VzuD2CbU0goUD@|`s@ZeubO1b({vAdg>I7mziIn;LYLcx^{qLPhiFR)CQUd>g23j&0cuc*?-~~IiL#N?0<`j za%ZdS4iI*XIF>&?>q2=o`#bgcr6*L!8TGx{3@ZPM1l5D@qq3SkY3QGm`UloEVSOR9 zpbs@?_G3l*PnIr2$Z_KYwNIT~H(Q1R`m%f#YWm*t;x2&lxikG2pF@@EI=GldN;b0J zzM^I`XHRw9Ca;G&uBb<=-#p;OMpyrK+R<^FkyR$-c0c-hf#f0ZR3MuRZ0*Y43iNel zKM3@O4zC!&3iPRm8;EWRJ#wMx6ZQBV7rm*O?$2{M_25-~8S96#mqOWF?Pw!c^A~mU zghO3@Idh3#;Ew*l(}DiL&VY7ec-Y7CH}JiRcP?MCqiB=>bZzY1v?d+f8%+*tkug2B zqtV}QfZ@T|4*Yn)1<4sql4Ce zN{+of;28HfmQjhaR8oJ zy!O$R%fCV}$+Y9YAL}L7rhwb?qBA(ZY!5n?Wf7zYusn(s+T5P+IXm37FS$D0-oqsw z?)vYRs_w=Y%T%|2vb@`^#NGaYyD{LdZ*zOw+_fm*=B^O!dL7lL(2jY&k;(h%eh=L5 zf%`r1|J(y!+>b?KDl1DHIwhu62Alt`n=g6(Zd=6V^1QS}^0d}cT5J%gmF2WPQ{wV} ze4a}Zf7GcE$)EYAN(`R9b12O^6(aC}cmjMVDSfX~sx=6FK~g69Zyx-7pu}sn*h7%# z{f54qD1FHwaJEztImS;*p6kv2RGz0k3 z6Qg=~5UHLr=m_Ux3H*W|179MkM}2{|t_D54OLDss8Q)+ghG)=N1boDegwrG7i%cZY zo);b#`93{5j(KsO@THRC(BO-XXv3-SXjB`C zpe}QUh89kx!V`uD=XVdG7+MdH#)i;!5)I#mA{4*#+YX$SXUQ9^^FB!pP zt-pZ+?8OXKmGyajIxY3No$TM*{ueCzyxyIa3cNlNOM8G-|0TqzPk4RibH7IdyzZlj zNU~d*g)HXG`i*6ZC~K7Z?4K1pGQ;!-$eZ=~{$fDt|HSgbSdZ&m`n!PX^4_EVrzlIWn)P{qImKuf0T3_awUPc+SKFIG2aZ!n7^<>19SdS^aAG1E+`_;<| zay{7u>oNZsW(ec<)Aa}?zf`o!lP`11AwyWB8N@v6cUy4QXG&oL_H7nD$o^SS7Ft;0 zo9B*M-y=ULc^!BN3u&+6_VBt!^V811QfFA(W-)H{Z%ElcU06H6Q<+of!qv9d7I%Se ziz&| zSbpw(u_14BpDXMX?xTzCc=GX%VtfIvV~QCPc^BS1^EzcNbisr9^F=XUgX_tF84`IH zo)UPyFc-Sui~0N2VjNEeJiko^E}Q#zDt6i2n;W=wS2X5e30$Y?Sd?hbb>Qj5T7Q}z zPQZJ7xnHu9PvX-SJRor>S6Ecgr|{`8)syGPu)yc`=V8Rjuh(Md$3lMYdpU-8uh8u|C0@oR5cdkC`0+!5&y5?s zhPYjv>1T*9#NOra9k%v!fiqX2?@BwoKXJ*Q5%)4>*8Z%M^47T2a>VWGN%3eqyhqrvSr3O&dRoumjrtJAgf;|wv{2WUUQL5S z_({`8wIK>XrGW!NCI|yjNo`j=IT(&>5j~koYvIf|;E8Z79@V1}U+e0xtwhT zoHQ{crKcvqIGaW?qoWh3V&XJ9(iVvZyTi{!gWI+R(NQcOP2tJfH#9Z|+V)UWYb-IG z)J&KDg!%=Dm;PwEvnSBqp>=F*$95Wx=6sPKijqarNo^#Yh*0FM{hJ#D-CaRMO=2R9 zhY$wo*y8%ornW#x+tk^)rK4Bt4YY+i$d8En-BXOu9NLrNJ|iw@jT|b9IU4t0#{{`8 Qh0vf8p8U7sgQ9cbUvrV1<^TWy literal 0 HcmV?d00001 diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CMakeSystem.cmake b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CMakeSystem.cmake new file mode 100644 index 0000000000..bbcd260466 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CMakeSystem.cmake @@ -0,0 +1,15 @@ +set(CMAKE_HOST_SYSTEM "Linux-3.17.0-031700-lowlatency") +set(CMAKE_HOST_SYSTEM_NAME "Linux") +set(CMAKE_HOST_SYSTEM_VERSION "3.17.0-031700-lowlatency") +set(CMAKE_HOST_SYSTEM_PROCESSOR "x86_64") + + + +set(CMAKE_SYSTEM "Linux-3.17.0-031700-lowlatency") +set(CMAKE_SYSTEM_NAME "Linux") +set(CMAKE_SYSTEM_VERSION "3.17.0-031700-lowlatency") +set(CMAKE_SYSTEM_PROCESSOR "x86_64") + +set(CMAKE_CROSSCOMPILING "FALSE") + +set(CMAKE_SYSTEM_LOADED 1) diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CompilerIdC/CMakeCCompilerId.c b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CompilerIdC/CMakeCCompilerId.c new file mode 100644 index 0000000000..cba81d4a6b --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CompilerIdC/CMakeCCompilerId.c @@ -0,0 +1,389 @@ +#ifdef __cplusplus +# error "A C++ compiler has been selected for C." +#endif + +/* Version number components: V=Version, R=Revision, P=Patch + Version date components: YYYY=Year, MM=Month, DD=Day */ + +#if defined(__18CXX) +# define ID_VOID_MAIN +#endif + +#if defined(__INTEL_COMPILER) || defined(__ICC) +# define COMPILER_ID "Intel" + /* __INTEL_COMPILER = VRP */ +# define COMPILER_VERSION_MAJOR DEC(__INTEL_COMPILER/100) +# define COMPILER_VERSION_MINOR DEC(__INTEL_COMPILER/10 % 10) +# define COMPILER_VERSION_PATCH DEC(__INTEL_COMPILER % 10) +# if defined(__INTEL_COMPILER_BUILD_DATE) + /* __INTEL_COMPILER_BUILD_DATE = YYYYMMDD */ +# define COMPILER_VERSION_TWEAK DEC(__INTEL_COMPILER_BUILD_DATE) +# endif + +#elif defined(__PATHCC__) +# define COMPILER_ID "PathScale" +# define COMPILER_VERSION_MAJOR DEC(__PATHCC__) +# define COMPILER_VERSION_MINOR DEC(__PATHCC_MINOR__) +# if defined(__PATHCC_PATCHLEVEL__) +# define COMPILER_VERSION_PATCH DEC(__PATHCC_PATCHLEVEL__) +# endif + +#elif defined(__clang__) +# define COMPILER_ID "Clang" +# define COMPILER_VERSION_MAJOR DEC(__clang_major__) +# define COMPILER_VERSION_MINOR DEC(__clang_minor__) +# define COMPILER_VERSION_PATCH DEC(__clang_patchlevel__) + +#elif defined(__BORLANDC__) && defined(__CODEGEARC_VERSION__) +# define COMPILER_ID "Embarcadero" +# define COMPILER_VERSION_MAJOR HEX(__CODEGEARC_VERSION__>>24 & 0x00FF) +# define COMPILER_VERSION_MINOR HEX(__CODEGEARC_VERSION__>>16 & 0x00FF) +# define COMPILER_VERSION_PATCH HEX(__CODEGEARC_VERSION__ & 0xFFFF) + +#elif defined(__BORLANDC__) +# define COMPILER_ID "Borland" + /* __BORLANDC__ = 0xVRR */ +# define COMPILER_VERSION_MAJOR HEX(__BORLANDC__>>8) +# define COMPILER_VERSION_MINOR HEX(__BORLANDC__ & 0xFF) + +#elif defined(__WATCOMC__) +# define COMPILER_ID "Watcom" + /* __WATCOMC__ = VVRR */ +# define COMPILER_VERSION_MAJOR DEC(__WATCOMC__ / 100) +# define COMPILER_VERSION_MINOR DEC(__WATCOMC__ % 100) + +#elif defined(__SUNPRO_C) +# define COMPILER_ID "SunPro" +# if __SUNPRO_C >= 0x5100 + /* __SUNPRO_C = 0xVRRP */ +# define COMPILER_VERSION_MAJOR HEX(__SUNPRO_C>>12) +# define COMPILER_VERSION_MINOR HEX(__SUNPRO_C>>4 & 0xFF) +# define COMPILER_VERSION_PATCH HEX(__SUNPRO_C & 0xF) +# else + /* __SUNPRO_C = 0xVRP */ +# define COMPILER_VERSION_MAJOR HEX(__SUNPRO_C>>8) +# define COMPILER_VERSION_MINOR HEX(__SUNPRO_C>>4 & 0xF) +# define COMPILER_VERSION_PATCH HEX(__SUNPRO_C & 0xF) +# endif + +#elif defined(__HP_cc) +# define COMPILER_ID "HP" + /* __HP_cc = VVRRPP */ +# define COMPILER_VERSION_MAJOR DEC(__HP_cc/10000) +# define COMPILER_VERSION_MINOR DEC(__HP_cc/100 % 100) +# define COMPILER_VERSION_PATCH DEC(__HP_cc % 100) + +#elif defined(__DECC) +# define COMPILER_ID "Compaq" + /* __DECC_VER = VVRRTPPPP */ +# define COMPILER_VERSION_MAJOR DEC(__DECC_VER/10000000) +# define COMPILER_VERSION_MINOR DEC(__DECC_VER/100000 % 100) +# define COMPILER_VERSION_PATCH DEC(__DECC_VER % 10000) + +#elif defined(__IBMC__) +# if defined(__COMPILER_VER__) +# define COMPILER_ID "zOS" +# else +# if __IBMC__ >= 800 +# define COMPILER_ID "XL" +# else +# define COMPILER_ID "VisualAge" +# endif + /* __IBMC__ = VRP */ +# define COMPILER_VERSION_MAJOR DEC(__IBMC__/100) +# define COMPILER_VERSION_MINOR DEC(__IBMC__/10 % 10) +# define COMPILER_VERSION_PATCH DEC(__IBMC__ % 10) +# endif + +#elif defined(__PGI) +# define COMPILER_ID "PGI" +# define COMPILER_VERSION_MAJOR DEC(__PGIC__) +# define COMPILER_VERSION_MINOR DEC(__PGIC_MINOR__) +# if defined(__PGIC_PATCHLEVEL__) +# define COMPILER_VERSION_PATCH DEC(__PGIC_PATCHLEVEL__) +# endif + +#elif defined(_CRAYC) +# define COMPILER_ID "Cray" +# define COMPILER_VERSION_MAJOR DEC(_RELEASE) +# define COMPILER_VERSION_MINOR DEC(_RELEASE_MINOR) + +#elif defined(__TI_COMPILER_VERSION__) +# define COMPILER_ID "TI" + /* __TI_COMPILER_VERSION__ = VVVRRRPPP */ +# define COMPILER_VERSION_MAJOR DEC(__TI_COMPILER_VERSION__/1000000) +# define COMPILER_VERSION_MINOR DEC(__TI_COMPILER_VERSION__/1000 % 1000) +# define COMPILER_VERSION_PATCH DEC(__TI_COMPILER_VERSION__ % 1000) + +#elif defined(__TINYC__) +# define COMPILER_ID "TinyCC" + +#elif defined(__SCO_VERSION__) +# define COMPILER_ID "SCO" + +#elif defined(__GNUC__) +# define COMPILER_ID "GNU" +# define COMPILER_VERSION_MAJOR DEC(__GNUC__) +# define COMPILER_VERSION_MINOR DEC(__GNUC_MINOR__) +# if defined(__GNUC_PATCHLEVEL__) +# define COMPILER_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__) +# endif + +#elif defined(_MSC_VER) +# define COMPILER_ID "MSVC" + /* _MSC_VER = VVRR */ +# define COMPILER_VERSION_MAJOR DEC(_MSC_VER / 100) +# define COMPILER_VERSION_MINOR DEC(_MSC_VER % 100) +# if defined(_MSC_FULL_VER) +# if _MSC_VER >= 1400 + /* _MSC_FULL_VER = VVRRPPPPP */ +# define COMPILER_VERSION_PATCH DEC(_MSC_FULL_VER % 100000) +# else + /* _MSC_FULL_VER = VVRRPPPP */ +# define COMPILER_VERSION_PATCH DEC(_MSC_FULL_VER % 10000) +# endif +# endif +# if defined(_MSC_BUILD) +# define COMPILER_VERSION_TWEAK DEC(_MSC_BUILD) +# endif + +/* Analog VisualDSP++ >= 4.5.6 */ +#elif defined(__VISUALDSPVERSION__) +# define COMPILER_ID "ADSP" + /* __VISUALDSPVERSION__ = 0xVVRRPP00 */ +# define COMPILER_VERSION_MAJOR HEX(__VISUALDSPVERSION__>>24) +# define COMPILER_VERSION_MINOR HEX(__VISUALDSPVERSION__>>16 & 0xFF) +# define COMPILER_VERSION_PATCH HEX(__VISUALDSPVERSION__>>8 & 0xFF) + +/* Analog VisualDSP++ < 4.5.6 */ +#elif defined(__ADSPBLACKFIN__) || defined(__ADSPTS__) || defined(__ADSP21000__) +# define COMPILER_ID "ADSP" + +/* IAR Systems compiler for embedded systems. + http://www.iar.com */ +#elif defined(__IAR_SYSTEMS_ICC__ ) || defined(__IAR_SYSTEMS_ICC) +# define COMPILER_ID "IAR" + +/* sdcc, the small devices C compiler for embedded systems, + http://sdcc.sourceforge.net */ +#elif defined(SDCC) +# define COMPILER_ID "SDCC" + /* SDCC = VRP */ +# define COMPILER_VERSION_MAJOR DEC(SDCC/100) +# define COMPILER_VERSION_MINOR DEC(SDCC/10 % 10) +# define COMPILER_VERSION_PATCH DEC(SDCC % 10) + +#elif defined(_SGI_COMPILER_VERSION) || defined(_COMPILER_VERSION) +# define COMPILER_ID "MIPSpro" +# if defined(_SGI_COMPILER_VERSION) + /* _SGI_COMPILER_VERSION = VRP */ +# define COMPILER_VERSION_MAJOR DEC(_SGI_COMPILER_VERSION/100) +# define COMPILER_VERSION_MINOR DEC(_SGI_COMPILER_VERSION/10 % 10) +# define COMPILER_VERSION_PATCH DEC(_SGI_COMPILER_VERSION % 10) +# else + /* _COMPILER_VERSION = VRP */ +# define COMPILER_VERSION_MAJOR DEC(_COMPILER_VERSION/100) +# define COMPILER_VERSION_MINOR DEC(_COMPILER_VERSION/10 % 10) +# define COMPILER_VERSION_PATCH DEC(_COMPILER_VERSION % 10) +# endif + +/* This compiler is either not known or is too old to define an + identification macro. Try to identify the platform and guess that + it is the native compiler. */ +#elif defined(__sgi) +# define COMPILER_ID "MIPSpro" + +#elif defined(__hpux) || defined(__hpua) +# define COMPILER_ID "HP" + +#else /* unknown compiler */ +# define COMPILER_ID "" + +#endif + +/* Construct the string literal in pieces to prevent the source from + getting matched. Store it in a pointer rather than an array + because some compilers will just produce instructions to fill the + array rather than assigning a pointer to a static array. */ +char const* info_compiler = "INFO" ":" "compiler[" COMPILER_ID "]"; + +/* Identify known platforms by name. */ +#if defined(__linux) || defined(__linux__) || defined(linux) +# define PLATFORM_ID "Linux" + +#elif defined(__CYGWIN__) +# define PLATFORM_ID "Cygwin" + +#elif defined(__MINGW32__) +# define PLATFORM_ID "MinGW" + +#elif defined(__APPLE__) +# define PLATFORM_ID "Darwin" + +#elif defined(_WIN32) || defined(__WIN32__) || defined(WIN32) +# define PLATFORM_ID "Windows" + +#elif defined(__FreeBSD__) || defined(__FreeBSD) +# define PLATFORM_ID "FreeBSD" + +#elif defined(__NetBSD__) || defined(__NetBSD) +# define PLATFORM_ID "NetBSD" + +#elif defined(__OpenBSD__) || defined(__OPENBSD) +# define PLATFORM_ID "OpenBSD" + +#elif defined(__sun) || defined(sun) +# define PLATFORM_ID "SunOS" + +#elif defined(_AIX) || defined(__AIX) || defined(__AIX__) || defined(__aix) || defined(__aix__) +# define PLATFORM_ID "AIX" + +#elif defined(__sgi) || defined(__sgi__) || defined(_SGI) +# define PLATFORM_ID "IRIX" + +#elif defined(__hpux) || defined(__hpux__) +# define PLATFORM_ID "HP-UX" + +#elif defined(__HAIKU__) +# define PLATFORM_ID "Haiku" + +#elif defined(__BeOS) || defined(__BEOS__) || defined(_BEOS) +# define PLATFORM_ID "BeOS" + +#elif defined(__QNX__) || defined(__QNXNTO__) +# define PLATFORM_ID "QNX" + +#elif defined(__tru64) || defined(_tru64) || defined(__TRU64__) +# define PLATFORM_ID "Tru64" + +#elif defined(__riscos) || defined(__riscos__) +# define PLATFORM_ID "RISCos" + +#elif defined(__sinix) || defined(__sinix__) || defined(__SINIX__) +# define PLATFORM_ID "SINIX" + +#elif defined(__UNIX_SV__) +# define PLATFORM_ID "UNIX_SV" + +#elif defined(__bsdos__) +# define PLATFORM_ID "BSDOS" + +#elif defined(_MPRAS) || defined(MPRAS) +# define PLATFORM_ID "MP-RAS" + +#elif defined(__osf) || defined(__osf__) +# define PLATFORM_ID "OSF1" + +#elif defined(_SCO_SV) || defined(SCO_SV) || defined(sco_sv) +# define PLATFORM_ID "SCO_SV" + +#elif defined(__ultrix) || defined(__ultrix__) || defined(_ULTRIX) +# define PLATFORM_ID "ULTRIX" + +#elif defined(__XENIX__) || defined(_XENIX) || defined(XENIX) +# define PLATFORM_ID "Xenix" + +#else /* unknown platform */ +# define PLATFORM_ID "" + +#endif + +/* For windows compilers MSVC and Intel we can determine + the architecture of the compiler being used. This is because + the compilers do not have flags that can change the architecture, + but rather depend on which compiler is being used +*/ +#if defined(_WIN32) && defined(_MSC_VER) +# if defined(_M_IA64) +# define ARCHITECTURE_ID "IA64" + +# elif defined(_M_X64) || defined(_M_AMD64) +# define ARCHITECTURE_ID "x64" + +# elif defined(_M_IX86) +# define ARCHITECTURE_ID "X86" + +# elif defined(_M_ARM) +# define ARCHITECTURE_ID "ARM" + +# elif defined(_M_MIPS) +# define ARCHITECTURE_ID "MIPS" + +# elif defined(_M_SH) +# define ARCHITECTURE_ID "SHx" + +# else /* unknown architecture */ +# define ARCHITECTURE_ID "" +# endif + +#else +# define ARCHITECTURE_ID "" +#endif + +/* Convert integer to decimal digit literals. */ +#define DEC(n) \ + ('0' + (((n) / 10000000)%10)), \ + ('0' + (((n) / 1000000)%10)), \ + ('0' + (((n) / 100000)%10)), \ + ('0' + (((n) / 10000)%10)), \ + ('0' + (((n) / 1000)%10)), \ + ('0' + (((n) / 100)%10)), \ + ('0' + (((n) / 10)%10)), \ + ('0' + ((n) % 10)) + +/* Convert integer to hex digit literals. */ +#define HEX(n) \ + ('0' + ((n)>>28 & 0xF)), \ + ('0' + ((n)>>24 & 0xF)), \ + ('0' + ((n)>>20 & 0xF)), \ + ('0' + ((n)>>16 & 0xF)), \ + ('0' + ((n)>>12 & 0xF)), \ + ('0' + ((n)>>8 & 0xF)), \ + ('0' + ((n)>>4 & 0xF)), \ + ('0' + ((n) & 0xF)) + +/* Construct a string literal encoding the version number components. */ +#ifdef COMPILER_VERSION_MAJOR +char const info_version[] = { + 'I', 'N', 'F', 'O', ':', + 'c','o','m','p','i','l','e','r','_','v','e','r','s','i','o','n','[', + COMPILER_VERSION_MAJOR, +# ifdef COMPILER_VERSION_MINOR + '.', COMPILER_VERSION_MINOR, +# ifdef COMPILER_VERSION_PATCH + '.', COMPILER_VERSION_PATCH, +# ifdef COMPILER_VERSION_TWEAK + '.', COMPILER_VERSION_TWEAK, +# endif +# endif +# endif + ']','\0'}; +#endif + +/* Construct the string literal in pieces to prevent the source from + getting matched. Store it in a pointer rather than an array + because some compilers will just produce instructions to fill the + array rather than assigning a pointer to a static array. */ +char const* info_platform = "INFO" ":" "platform[" PLATFORM_ID "]"; +char const* info_arch = "INFO" ":" "arch[" ARCHITECTURE_ID "]"; + + + +/*--------------------------------------------------------------------------*/ + +#ifdef ID_VOID_MAIN +void main() {} +#else +int main(int argc, char* argv[]) +{ + int require = 0; + require += info_compiler[argc]; + require += info_platform[argc]; + require += info_arch[argc]; +#ifdef COMPILER_VERSION_MAJOR + require += info_version[argc]; +#endif + (void)argv; + return require; +} +#endif diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CompilerIdC/a.out b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CompilerIdC/a.out new file mode 100755 index 0000000000000000000000000000000000000000..1d7e438b92300abaac114123c512167b14d7d259 GIT binary patch literal 8683 zcmeHMZ){sv6~DIguWf2Op#`^P&C_V5v|79*&5FBe>^X_k=gMhI>a?4>^x27>#LRz+ z{k$auwn}LytgK@a2n7VFACL$V5+6V%;sZ;`w0?j|=`^GvKq?ch`d2DisUqlR&bjZL z`uW906B2yNmEJw~{OIPL+_E3o+lq5<;jVAl5;? zU2GE#0N2CAaw?UWu8?V_O=QLev<{wt(*y!eRTh|j-h>5Hju0vOt0a|*CjCL9$ubo} zkpSvptX{WdfyQKksY-EZL|G46)N3cbcG6?IOo1`w_F>!biITmjQw0ur6^ZDVd4-}Z zro&f^1eOhSDydpUdn6|WQ`Y-3=#dIZ{Ac2&>LK#?uztBi?PE%;cs!jN-P`kcI?<6% zWs6fCQ-Qr5dwcwaoWEPP8||a){)5BP6ZfMJIE;A{JU9lh{$|~&^}CYqzB=)X(_0P? z9$g&T_VXX1EsZzcMm%rmnRqG-$V4WWB}5nd zBjMgYz1!dIe*!F-FV+E3Vw~Kc#jUAzSoawDTJgkW3EvG31qE_o(9SFx_1E@*hBotd(-Lc%wERRjh?IBsK<;T%p@jS-R$jkchO~1x^62vV zGO%5@!=+0nw9<##%-`-Dj)pHTF4wC7*It1@M&7CaEM^2qhCfr_V1TrU7c8>MgD(n`h47en`@*V)b8U~D#YOPhm$Jm-byH;azY zeQkF0qYuGbYvIy>=lm(9K_v^bq5C6C<8KC!1xw}N(QxTra5!B0LogaSyK}Bdfi5}Q zf%HgZ*Ojh6X%{|r;TyiT`IB;4J9FFE?rA%X@rg+3Mx=DFA8eF2{aKq?a%lT*7H{B- zKRyzCJ~$FQ5!9E)$Nen-5sU{pR%mEAsz#kOS(Swk4jg)NESEW%N+6 z{l#RykjiC`cbcikPlW&%dPYo*lj*oIp37&BM{so@FrFWqJP!69+gwj|f*V}NpZ~aA z{yNatfkuE%LkIjA=q;dcV?DgKW*DuwUSM*(JR}@bUdOiP#-=wNjb6m@8xa8g-6%k* zw!9EKpdRHvxL+<~48rXlaQhB;HoVkyN<6dmsoi^aJc=;N^uzNm*!?O3LAUocXWzyK zXBs@4bqRnKh%<@xy>9QfoFTXG4OhsmoUIGF+h4EO+?}sAXzsvFsET*K9KKqH_3MW4AeESW1a74axJa(z*-Ni^}t#Wto6YEs|OZgzlZ4@QOQ8YdsL>) zR59;TWoaYv@58nc(-xWIc`GJM+lc4$(N^MpRFB_VOkDquPs%yu=bS2%%9)S+;eHy^ zf>T8z*2^6B0Yvc}fXQbPv6(0nJbTCl+fz*Z?Uj21;CcUm`*Td6Gl`fY|BT0o=eXG) z90Fuw9zO4~Ju1n=wnp*}lDk8Efa(eUpA$aE+8te`IPN_xo(5H_3=y3my1%dQNu_;w zw3s!DN{>I_@9F3+O0MgbF4!;j>@rcYO0c`5YadCPGTlP>3)2}RJ_^*xn{<*(sjQLA zpA`OV&Pe)$z2OccK0(|>w&))%rr>OvN(eu4lkvi&@F%9TV9%sR-mIY=Z55+KT|SwP zqXLyqrVZgwWmAwF$tlRkfq}YQB5uTmKRKz7=i`~AKA8Yr=1dJep3ldpO${!8Wemi? zdOVXF1J^k)2$^4cF)fZ33c?Tj@=P*o*x${6!{hwJvBu*(;8cOD{D0y3Cqc+i)|$Qm z432r$k2+Q0D*rbW$yKttN>P@&Ah+rpPF3Ot8QdYcN@myZhpKxpN7(kFP2w2%ZypNYNyPCy0D zdDiE79w2>Q&p3XTWBLN<;~K&|uOlkyE94mMSmP&HybJ~GQ`V1B{4vt!cCvqa`%l~S zc^#Z0eO@JnFmN&Ty&-hKKu<8rickn=MXGNl{#}wa>Rll9|+bO_@>9g5?LIG`Y`|-CNro*Jq zek2GP`m&}nFo<NoBj9%O$P}uf3V-JwzEO-`dy7T3tpG2@s05DQLT_HyI@7( zb<|qvf|Y{T$7Z5t$sj>T6V5T)z($x;hwa!`n{VSzdHU_2-Jb6MB9682fP*f z0dG|>@iG$tT#-n17M1wwaiRn6h4Et_C*y#()|f|WiC5c3ZkFuW$Kf2{%4%`(6Tn-X zKGA7w*Dn#b%v0WPEJ@raRFda)_!8jQ4>9V8B>DO);9eO2&)V!?C3*Y0ahvQ1Z1(>} zcI^Gr2px`o@g574{Fe{38E^#wTT%eW_S)?{_7M32X@B*47(qMGKMJi^aF~_pIf?s( zW{Y2p<&A<-gqxf(xOP0yH>5|xN20ne63KjWB2|FHu5M)Xv2-q*EQlJAt|xN(L^?Mb zPwNRImoMn?;*`LfopjPjCj5K%eQ^(1t|6r3S=Kz6>Tuf3PYd%bn7)1YGEbUXrA ziS`Y~Ur6@#(FIaCA;TXS3J!+!(7}F)-)sz*tMn5>?|<%Ka4_5lQkEKd11t3Xkwd+~ zh<<2b;7BN{M}xhQ5So*hv}1*$3|r{o=%8Ndqv&8C_E0oFnobHlNt>6qLQl$LHR;$d zdR5hWwF{kOQLMfKhPpydpNwY{U|$a(0`rMfRxcKk36aW<=XAdKvIdGxg9x(FUbAUZ zk}usr5)S)RV_rKScu^msm)@6-7Ygvkbsd_>24 & 0x00FF) +# define COMPILER_VERSION_MINOR HEX(__CODEGEARC_VERSION__>>16 & 0x00FF) +# define COMPILER_VERSION_PATCH HEX(__CODEGEARC_VERSION__ & 0xFFFF) + +#elif defined(__BORLANDC__) +# define COMPILER_ID "Borland" + /* __BORLANDC__ = 0xVRR */ +# define COMPILER_VERSION_MAJOR HEX(__BORLANDC__>>8) +# define COMPILER_VERSION_MINOR HEX(__BORLANDC__ & 0xFF) + +#elif defined(__WATCOMC__) +# define COMPILER_ID "Watcom" + /* __WATCOMC__ = VVRR */ +# define COMPILER_VERSION_MAJOR DEC(__WATCOMC__ / 100) +# define COMPILER_VERSION_MINOR DEC(__WATCOMC__ % 100) + +#elif defined(__SUNPRO_CC) +# define COMPILER_ID "SunPro" +# if __SUNPRO_CC >= 0x5100 + /* __SUNPRO_CC = 0xVRRP */ +# define COMPILER_VERSION_MAJOR HEX(__SUNPRO_CC>>12) +# define COMPILER_VERSION_MINOR HEX(__SUNPRO_CC>>4 & 0xFF) +# define COMPILER_VERSION_PATCH HEX(__SUNPRO_CC & 0xF) +# else + /* __SUNPRO_CC = 0xVRP */ +# define COMPILER_VERSION_MAJOR HEX(__SUNPRO_CC>>8) +# define COMPILER_VERSION_MINOR HEX(__SUNPRO_CC>>4 & 0xF) +# define COMPILER_VERSION_PATCH HEX(__SUNPRO_CC & 0xF) +# endif + +#elif defined(__HP_aCC) +# define COMPILER_ID "HP" + /* __HP_aCC = VVRRPP */ +# define COMPILER_VERSION_MAJOR DEC(__HP_aCC/10000) +# define COMPILER_VERSION_MINOR DEC(__HP_aCC/100 % 100) +# define COMPILER_VERSION_PATCH DEC(__HP_aCC % 100) + +#elif defined(__DECCXX) +# define COMPILER_ID "Compaq" + /* __DECCXX_VER = VVRRTPPPP */ +# define COMPILER_VERSION_MAJOR DEC(__DECCXX_VER/10000000) +# define COMPILER_VERSION_MINOR DEC(__DECCXX_VER/100000 % 100) +# define COMPILER_VERSION_PATCH DEC(__DECCXX_VER % 10000) + +#elif defined(__IBMCPP__) +# if defined(__COMPILER_VER__) +# define COMPILER_ID "zOS" +# else +# if __IBMCPP__ >= 800 +# define COMPILER_ID "XL" +# else +# define COMPILER_ID "VisualAge" +# endif + /* __IBMCPP__ = VRP */ +# define COMPILER_VERSION_MAJOR DEC(__IBMCPP__/100) +# define COMPILER_VERSION_MINOR DEC(__IBMCPP__/10 % 10) +# define COMPILER_VERSION_PATCH DEC(__IBMCPP__ % 10) +# endif + +#elif defined(__PGI) +# define COMPILER_ID "PGI" +# define COMPILER_VERSION_MAJOR DEC(__PGIC__) +# define COMPILER_VERSION_MINOR DEC(__PGIC_MINOR__) +# if defined(__PGIC_PATCHLEVEL__) +# define COMPILER_VERSION_PATCH DEC(__PGIC_PATCHLEVEL__) +# endif + +#elif defined(_CRAYC) +# define COMPILER_ID "Cray" +# define COMPILER_VERSION_MAJOR DEC(_RELEASE) +# define COMPILER_VERSION_MINOR DEC(_RELEASE_MINOR) + +#elif defined(__TI_COMPILER_VERSION__) +# define COMPILER_ID "TI" + /* __TI_COMPILER_VERSION__ = VVVRRRPPP */ +# define COMPILER_VERSION_MAJOR DEC(__TI_COMPILER_VERSION__/1000000) +# define COMPILER_VERSION_MINOR DEC(__TI_COMPILER_VERSION__/1000 % 1000) +# define COMPILER_VERSION_PATCH DEC(__TI_COMPILER_VERSION__ % 1000) + +#elif defined(__SCO_VERSION__) +# define COMPILER_ID "SCO" + +#elif defined(__GNUC__) +# define COMPILER_ID "GNU" +# define COMPILER_VERSION_MAJOR DEC(__GNUC__) +# define COMPILER_VERSION_MINOR DEC(__GNUC_MINOR__) +# if defined(__GNUC_PATCHLEVEL__) +# define COMPILER_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__) +# endif + +#elif defined(_MSC_VER) +# define COMPILER_ID "MSVC" + /* _MSC_VER = VVRR */ +# define COMPILER_VERSION_MAJOR DEC(_MSC_VER / 100) +# define COMPILER_VERSION_MINOR DEC(_MSC_VER % 100) +# if defined(_MSC_FULL_VER) +# if _MSC_VER >= 1400 + /* _MSC_FULL_VER = VVRRPPPPP */ +# define COMPILER_VERSION_PATCH DEC(_MSC_FULL_VER % 100000) +# else + /* _MSC_FULL_VER = VVRRPPPP */ +# define COMPILER_VERSION_PATCH DEC(_MSC_FULL_VER % 10000) +# endif +# endif +# if defined(_MSC_BUILD) +# define COMPILER_VERSION_TWEAK DEC(_MSC_BUILD) +# endif + +/* Analog VisualDSP++ >= 4.5.6 */ +#elif defined(__VISUALDSPVERSION__) +# define COMPILER_ID "ADSP" + /* __VISUALDSPVERSION__ = 0xVVRRPP00 */ +# define COMPILER_VERSION_MAJOR HEX(__VISUALDSPVERSION__>>24) +# define COMPILER_VERSION_MINOR HEX(__VISUALDSPVERSION__>>16 & 0xFF) +# define COMPILER_VERSION_PATCH HEX(__VISUALDSPVERSION__>>8 & 0xFF) + +/* Analog VisualDSP++ < 4.5.6 */ +#elif defined(__ADSPBLACKFIN__) || defined(__ADSPTS__) || defined(__ADSP21000__) +# define COMPILER_ID "ADSP" + +/* IAR Systems compiler for embedded systems. + http://www.iar.com */ +#elif defined(__IAR_SYSTEMS_ICC__ ) || defined(__IAR_SYSTEMS_ICC) +# define COMPILER_ID "IAR" + +#elif defined(_SGI_COMPILER_VERSION) || defined(_COMPILER_VERSION) +# define COMPILER_ID "MIPSpro" +# if defined(_SGI_COMPILER_VERSION) + /* _SGI_COMPILER_VERSION = VRP */ +# define COMPILER_VERSION_MAJOR DEC(_SGI_COMPILER_VERSION/100) +# define COMPILER_VERSION_MINOR DEC(_SGI_COMPILER_VERSION/10 % 10) +# define COMPILER_VERSION_PATCH DEC(_SGI_COMPILER_VERSION % 10) +# else + /* _COMPILER_VERSION = VRP */ +# define COMPILER_VERSION_MAJOR DEC(_COMPILER_VERSION/100) +# define COMPILER_VERSION_MINOR DEC(_COMPILER_VERSION/10 % 10) +# define COMPILER_VERSION_PATCH DEC(_COMPILER_VERSION % 10) +# endif + +/* This compiler is either not known or is too old to define an + identification macro. Try to identify the platform and guess that + it is the native compiler. */ +#elif defined(__sgi) +# define COMPILER_ID "MIPSpro" + +#elif defined(__hpux) || defined(__hpua) +# define COMPILER_ID "HP" + +#else /* unknown compiler */ +# define COMPILER_ID "" + +#endif + +/* Construct the string literal in pieces to prevent the source from + getting matched. Store it in a pointer rather than an array + because some compilers will just produce instructions to fill the + array rather than assigning a pointer to a static array. */ +char const* info_compiler = "INFO" ":" "compiler[" COMPILER_ID "]"; + +/* Identify known platforms by name. */ +#if defined(__linux) || defined(__linux__) || defined(linux) +# define PLATFORM_ID "Linux" + +#elif defined(__CYGWIN__) +# define PLATFORM_ID "Cygwin" + +#elif defined(__MINGW32__) +# define PLATFORM_ID "MinGW" + +#elif defined(__APPLE__) +# define PLATFORM_ID "Darwin" + +#elif defined(_WIN32) || defined(__WIN32__) || defined(WIN32) +# define PLATFORM_ID "Windows" + +#elif defined(__FreeBSD__) || defined(__FreeBSD) +# define PLATFORM_ID "FreeBSD" + +#elif defined(__NetBSD__) || defined(__NetBSD) +# define PLATFORM_ID "NetBSD" + +#elif defined(__OpenBSD__) || defined(__OPENBSD) +# define PLATFORM_ID "OpenBSD" + +#elif defined(__sun) || defined(sun) +# define PLATFORM_ID "SunOS" + +#elif defined(_AIX) || defined(__AIX) || defined(__AIX__) || defined(__aix) || defined(__aix__) +# define PLATFORM_ID "AIX" + +#elif defined(__sgi) || defined(__sgi__) || defined(_SGI) +# define PLATFORM_ID "IRIX" + +#elif defined(__hpux) || defined(__hpux__) +# define PLATFORM_ID "HP-UX" + +#elif defined(__HAIKU__) +# define PLATFORM_ID "Haiku" + +#elif defined(__BeOS) || defined(__BEOS__) || defined(_BEOS) +# define PLATFORM_ID "BeOS" + +#elif defined(__QNX__) || defined(__QNXNTO__) +# define PLATFORM_ID "QNX" + +#elif defined(__tru64) || defined(_tru64) || defined(__TRU64__) +# define PLATFORM_ID "Tru64" + +#elif defined(__riscos) || defined(__riscos__) +# define PLATFORM_ID "RISCos" + +#elif defined(__sinix) || defined(__sinix__) || defined(__SINIX__) +# define PLATFORM_ID "SINIX" + +#elif defined(__UNIX_SV__) +# define PLATFORM_ID "UNIX_SV" + +#elif defined(__bsdos__) +# define PLATFORM_ID "BSDOS" + +#elif defined(_MPRAS) || defined(MPRAS) +# define PLATFORM_ID "MP-RAS" + +#elif defined(__osf) || defined(__osf__) +# define PLATFORM_ID "OSF1" + +#elif defined(_SCO_SV) || defined(SCO_SV) || defined(sco_sv) +# define PLATFORM_ID "SCO_SV" + +#elif defined(__ultrix) || defined(__ultrix__) || defined(_ULTRIX) +# define PLATFORM_ID "ULTRIX" + +#elif defined(__XENIX__) || defined(_XENIX) || defined(XENIX) +# define PLATFORM_ID "Xenix" + +#else /* unknown platform */ +# define PLATFORM_ID "" + +#endif + +/* For windows compilers MSVC and Intel we can determine + the architecture of the compiler being used. This is because + the compilers do not have flags that can change the architecture, + but rather depend on which compiler is being used +*/ +#if defined(_WIN32) && defined(_MSC_VER) +# if defined(_M_IA64) +# define ARCHITECTURE_ID "IA64" + +# elif defined(_M_X64) || defined(_M_AMD64) +# define ARCHITECTURE_ID "x64" + +# elif defined(_M_IX86) +# define ARCHITECTURE_ID "X86" + +# elif defined(_M_ARM) +# define ARCHITECTURE_ID "ARM" + +# elif defined(_M_MIPS) +# define ARCHITECTURE_ID "MIPS" + +# elif defined(_M_SH) +# define ARCHITECTURE_ID "SHx" + +# else /* unknown architecture */ +# define ARCHITECTURE_ID "" +# endif + +#else +# define ARCHITECTURE_ID "" +#endif + +/* Convert integer to decimal digit literals. */ +#define DEC(n) \ + ('0' + (((n) / 10000000)%10)), \ + ('0' + (((n) / 1000000)%10)), \ + ('0' + (((n) / 100000)%10)), \ + ('0' + (((n) / 10000)%10)), \ + ('0' + (((n) / 1000)%10)), \ + ('0' + (((n) / 100)%10)), \ + ('0' + (((n) / 10)%10)), \ + ('0' + ((n) % 10)) + +/* Convert integer to hex digit literals. */ +#define HEX(n) \ + ('0' + ((n)>>28 & 0xF)), \ + ('0' + ((n)>>24 & 0xF)), \ + ('0' + ((n)>>20 & 0xF)), \ + ('0' + ((n)>>16 & 0xF)), \ + ('0' + ((n)>>12 & 0xF)), \ + ('0' + ((n)>>8 & 0xF)), \ + ('0' + ((n)>>4 & 0xF)), \ + ('0' + ((n) & 0xF)) + +/* Construct a string literal encoding the version number components. */ +#ifdef COMPILER_VERSION_MAJOR +char const info_version[] = { + 'I', 'N', 'F', 'O', ':', + 'c','o','m','p','i','l','e','r','_','v','e','r','s','i','o','n','[', + COMPILER_VERSION_MAJOR, +# ifdef COMPILER_VERSION_MINOR + '.', COMPILER_VERSION_MINOR, +# ifdef COMPILER_VERSION_PATCH + '.', COMPILER_VERSION_PATCH, +# ifdef COMPILER_VERSION_TWEAK + '.', COMPILER_VERSION_TWEAK, +# endif +# endif +# endif + ']','\0'}; +#endif + +/* Construct the string literal in pieces to prevent the source from + getting matched. Store it in a pointer rather than an array + because some compilers will just produce instructions to fill the + array rather than assigning a pointer to a static array. */ +char const* info_platform = "INFO" ":" "platform[" PLATFORM_ID "]"; +char const* info_arch = "INFO" ":" "arch[" ARCHITECTURE_ID "]"; + + + +/*--------------------------------------------------------------------------*/ + +int main(int argc, char* argv[]) +{ + int require = 0; + require += info_compiler[argc]; + require += info_platform[argc]; +#ifdef COMPILER_VERSION_MAJOR + require += info_version[argc]; +#endif + (void)argv; + return require; +} diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CompilerIdCXX/a.out b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CompilerIdCXX/a.out new file mode 100755 index 0000000000000000000000000000000000000000..aeee00b0724a9ab52a33c118ab316ac8e587fac6 GIT binary patch literal 8692 zcmeHMZ){W76+gC<5DM51g)P8nEC!N6i%CM7nO1F|<2ZRnPGH~^7=&jhc8FX5iR|Y# zX}bp_x#TN^X|Rx-gmzliuBuUHsD}~$3bWfihzt5V77%V02J`UN{k6&G;bmKtTfREp90Dik75-h)Dz`&AgNRrB{1Vttd`J)wv$`ZgM z0OCz7-yeJrI4JJYGrp6;FLM0+}w zEl#yh`Fq-Xx_yP5uS>L>{FCj#(6A_p`>_=@s`EO0Xbe#PrFSXPwvm+#?(s6`-&`U$rTeRdN*^V;PyhHX1Yry{Q{ zqS|>gTzc=ATKZ6(`SY!P(eTCj`9=lQi|6+Vaq(t@0#|>IhPTIEZG8Z92eE>~YWqGE z>dcZ;EnRumKC&=J1yIFqkGw@$<;$+N6NJr?#`foz9B8kW-d4|Fe?qk_s_!iok^BoX zR8L+)vRZn_;D0FjCm#FBDi1)hWf+-PU&M-xywmu7glwNIQ2W%G#}2JT1O1_URaiIt zmdA;;D_tosj$C^lDXuoSRzOKUO5eDlmWr1zhVF_|Pp$7lXQx6p)H7Hi*Ew+gYTg#Q ztDaiFr5-K}UFS|HO^UQU6}mgJFz$1;y+r;Xa4=9R2c8UJKqLQo0@~-RVOg<#ivZGYd9#_s7NS^rDZ9 z1dawq0>=W{!g!^;Pw@SVu~9n|M15>kqfS6oQFy3-?;~Tm%w#H^%pbwoI06EiOvm-{ zTt0IoLepD<@%-4tk&*lJwP%v~LMoR%(qV*dpG^2U(M@dICdZ>4C}|x(`f0iR0?JoW zMo>;;hrEIE1C$p~M)0+*#?eaa1qIu4`@uHlwryIyqWL?v6>h@m8{tR(4l0Z(jvbjPl(TL>nbK74+Qeh(86aJpZ%2iG*&qgb+$ zmq6H!^-NNJuhac)d&t@Pnj_@&oNfp?y{|T^&W@LxRHuJt#h_D3JN*G?N5JXrb$WW8 zt!UrtY!>bMDboGu$2{N3<#Jf=f#n`p?t$eVSnh%UR}akNeviUgDTRU&?@?K62-bH&9X^-0)q1&Y0EvfruzJ&khg3qzmfv8ZUC$#Z=Jd@NW63AuEU}*7tK0a+QIQ`TZnxXf2 zCN+jd=g=WWK2eI{akNkXAMVRD$*gXDH~)=J^N+?Fk8{6WL9O!th3B6DF(O-Y_%bRq z=9wS0E2vfeZ+L`Oi5eVQb&%%cW z#mJEby-m(dfq4x55EJI|`8#((b{MbsY;UdqS;^=Azuc$@)60_oU7=MXPbDc*vlvtP z%-5R~f%AXDZlP5oYx(Ce%gmpZ{8{-zZda%x#qW>dc}&nRP}$x0zU%zo&}whhe}i0? ziO=8tR{3AmYH!uwM=sT$%cnm)6g;1k|3|c?rZS(ud;DLQ|KIZXGyXAVnE4?09XwFIOq7y&Eb0B2`CiHQ$_n0(&u;&T3G&75r{8iE_DMdM zBS4I(EORKMLRg0x#5D5cyBc2&ye?PcYw+Wvm?4pN;EKZQ zs5#StD+RBQ)wmn)MHDk6(hg_=UeC;#4!jBA^G7xQAn^KAjjzM?BxZ(0+JUDBUN6j< z4)_A_I#7+{X@TdrDZ_!M5uUdu7{}!XoJTP;B+?GBeie;5*Z_Z{=~xx$n`^^Ui?#kV zJ?yXsIxPK9bA<4i1rJF4tOY+P{8#E}L!H7nJ~pWB&(nyL|9Oj_9|-%}_cDigy>`7T z>|H=V+$rFpKm;nkp8cN?x8Zm=vqBMe9Q{?`wf#f+_5A!x5ZBg>6Z#izt1}+fiw>!6 zmsi-=j)%t)UrYTX_W`{83?c3jWmiW}3A}dv6cKmhxU!C)7Z6`tXMTN4;MKlK`?2(6 z9iKl#+*4}~ZzA4eZ-oxaxcxQZruobJklzcu6%=XD>+@d_r+%R8CJIRr1N;MVH_nSg z7XNppy>&ftUc&dPhT}{tuW9eKrS%5l_ zrX_OP@pNu9p4Jk2E?>~%#VMehope%9CVV}+zq$)O*D=!QENh%hH9T$Rr@=VOCW@KN zG*V2OMn~W()8JtI>16QGp`g4%3MYJHlaru*J<{2g%8uvwN(lY*?+*-yw9rr=w#sNC zr>ndsKEzh~|M literal 0 HcmV?d00001 diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeDirectoryInformation.cmake b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeDirectoryInformation.cmake new file mode 100644 index 0000000000..335b0cbcf2 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeDirectoryInformation.cmake @@ -0,0 +1,16 @@ +# CMAKE generated file: DO NOT EDIT! +# Generated by "Unix Makefiles" Generator, CMake Version 2.8 + +# Relative path conversion top directories. +SET(CMAKE_RELATIVE_PATH_TOP_SOURCE "/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C") +SET(CMAKE_RELATIVE_PATH_TOP_BINARY "/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build") + +# Force unix paths in dependencies. +SET(CMAKE_FORCE_UNIX_PATHS 1) + + +# The C and CXX include file regular expressions for this directory. +SET(CMAKE_C_INCLUDE_REGEX_SCAN "^.*$") +SET(CMAKE_C_INCLUDE_REGEX_COMPLAIN "^$") +SET(CMAKE_CXX_INCLUDE_REGEX_SCAN ${CMAKE_C_INCLUDE_REGEX_SCAN}) +SET(CMAKE_CXX_INCLUDE_REGEX_COMPLAIN ${CMAKE_C_INCLUDE_REGEX_COMPLAIN}) diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeOutput.log b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeOutput.log new file mode 100644 index 0000000000..10bdcf5f63 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeOutput.log @@ -0,0 +1,263 @@ +The system is: Linux - 3.17.0-031700-lowlatency - x86_64 +Compiling the C compiler identification source file "CMakeCCompilerId.c" succeeded. +Compiler: /usr/bin/cc +Build flags: +Id flags: + +The output was: +0 + + +Compilation of the C compiler identification source "CMakeCCompilerId.c" produced "a.out" + +The C compiler identification is GNU, found in "/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CompilerIdC/a.out" + +Compiling the CXX compiler identification source file "CMakeCXXCompilerId.cpp" succeeded. +Compiler: /usr/bin/c++ +Build flags: +Id flags: + +The output was: +0 + + +Compilation of the CXX compiler identification source "CMakeCXXCompilerId.cpp" produced "a.out" + +The CXX compiler identification is GNU, found in "/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CompilerIdCXX/a.out" + +Determining if the C compiler works passed with the following output: +Change Dir: /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp + +Run Build Command:/usr/bin/make "cmTryCompileExec4097118404/fast" +/usr/bin/make -f CMakeFiles/cmTryCompileExec4097118404.dir/build.make CMakeFiles/cmTryCompileExec4097118404.dir/build +make[1]: Entering directory `/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp' +/usr/bin/cmake -E cmake_progress_report /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp/CMakeFiles 1 +Building C object CMakeFiles/cmTryCompileExec4097118404.dir/testCCompiler.c.o +/usr/bin/cc -o CMakeFiles/cmTryCompileExec4097118404.dir/testCCompiler.c.o -c /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp/testCCompiler.c +Linking C executable cmTryCompileExec4097118404 +/usr/bin/cmake -E cmake_link_script CMakeFiles/cmTryCompileExec4097118404.dir/link.txt --verbose=1 +/usr/bin/cc CMakeFiles/cmTryCompileExec4097118404.dir/testCCompiler.c.o -o cmTryCompileExec4097118404 -rdynamic +make[1]: Leaving directory `/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp' + + +Detecting C compiler ABI info compiled with the following output: +Change Dir: /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp + +Run Build Command:/usr/bin/make "cmTryCompileExec3603593924/fast" +/usr/bin/make -f CMakeFiles/cmTryCompileExec3603593924.dir/build.make CMakeFiles/cmTryCompileExec3603593924.dir/build +make[1]: Entering directory `/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp' +/usr/bin/cmake -E cmake_progress_report /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp/CMakeFiles 1 +Building C object CMakeFiles/cmTryCompileExec3603593924.dir/CMakeCCompilerABI.c.o +/usr/bin/cc -o CMakeFiles/cmTryCompileExec3603593924.dir/CMakeCCompilerABI.c.o -c /usr/share/cmake-2.8/Modules/CMakeCCompilerABI.c +Linking C executable cmTryCompileExec3603593924 +/usr/bin/cmake -E cmake_link_script CMakeFiles/cmTryCompileExec3603593924.dir/link.txt --verbose=1 +/usr/bin/cc -v CMakeFiles/cmTryCompileExec3603593924.dir/CMakeCCompilerABI.c.o -o cmTryCompileExec3603593924 -rdynamic +Using built-in specs. +COLLECT_GCC=/usr/bin/cc +COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/4.8/lto-wrapper +Target: x86_64-linux-gnu +Configured with: ../src/configure -v --with-pkgversion='Ubuntu 4.8.4-2ubuntu1~14.04' --with-bugurl=file:///usr/share/doc/gcc-4.8/README.Bugs --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-4.8 --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --with-gxx-include-dir=/usr/include/c++/4.8 --libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-gnu-unique-object --disable-libmudflap --enable-plugin --with-system-zlib --disable-browser-plugin --enable-java-awt=gtk --enable-gtk-cairo --with-java-home=/usr/lib/jvm/java-1.5.0-gcj-4.8-amd64/jre --enable-java-home --with-jvm-root-dir=/usr/lib/jvm/java-1.5.0-gcj-4.8-amd64 --with-jvm-jar-dir=/usr/lib/jvm-exports/java-1.5.0-gcj-4.8-amd64 --with-arch-directory=amd64 --with-ecj-jar=/usr/share/java/eclipse-ecj.jar --enable-objc-gc --enable-multiarch --disable-werror --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --with-tune=generic --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu +Thread model: posix +gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04) +COMPILER_PATH=/usr/lib/gcc/x86_64-linux-gnu/4.8/:/usr/lib/gcc/x86_64-linux-gnu/4.8/:/usr/lib/gcc/x86_64-linux-gnu/:/usr/lib/gcc/x86_64-linux-gnu/4.8/:/usr/lib/gcc/x86_64-linux-gnu/ +LIBRARY_PATH=/usr/lib/gcc/x86_64-linux-gnu/4.8/:/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu/:/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../../lib/:/lib/x86_64-linux-gnu/:/lib/../lib/:/usr/lib/x86_64-linux-gnu/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../:/lib/:/usr/lib/ +COLLECT_GCC_OPTIONS='-v' '-o' 'cmTryCompileExec3603593924' '-rdynamic' '-mtune=generic' '-march=x86-64' + /usr/lib/gcc/x86_64-linux-gnu/4.8/collect2 --sysroot=/ --build-id --eh-frame-hdr -m elf_x86_64 --hash-style=gnu --as-needed -export-dynamic -dynamic-linker /lib64/ld-linux-x86-64.so.2 -z relro -o cmTryCompileExec3603593924 /usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu/crt1.o /usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu/crti.o /usr/lib/gcc/x86_64-linux-gnu/4.8/crtbegin.o -L/usr/lib/gcc/x86_64-linux-gnu/4.8 -L/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu -L/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../../lib -L/lib/x86_64-linux-gnu -L/lib/../lib -L/usr/lib/x86_64-linux-gnu -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-linux-gnu/4.8/../../.. CMakeFiles/cmTryCompileExec3603593924.dir/CMakeCCompilerABI.c.o -lgcc --as-needed -lgcc_s --no-as-needed -lc -lgcc --as-needed -lgcc_s --no-as-needed /usr/lib/gcc/x86_64-linux-gnu/4.8/crtend.o /usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu/crtn.o +make[1]: Leaving directory `/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp' + + +Parsed C implicit link information from above output: + link line regex: [^( *|.*[/\])(ld|([^/\]+-)?ld|collect2)[^/\]*( |$)] + ignore line: [Change Dir: /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp] + ignore line: [] + ignore line: [Run Build Command:/usr/bin/make "cmTryCompileExec3603593924/fast"] + ignore line: [/usr/bin/make -f CMakeFiles/cmTryCompileExec3603593924.dir/build.make CMakeFiles/cmTryCompileExec3603593924.dir/build] + ignore line: [make[1]: Entering directory `/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp'] + ignore line: [/usr/bin/cmake -E cmake_progress_report /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp/CMakeFiles 1] + ignore line: [Building C object CMakeFiles/cmTryCompileExec3603593924.dir/CMakeCCompilerABI.c.o] + ignore line: [/usr/bin/cc -o CMakeFiles/cmTryCompileExec3603593924.dir/CMakeCCompilerABI.c.o -c /usr/share/cmake-2.8/Modules/CMakeCCompilerABI.c] + ignore line: [Linking C executable cmTryCompileExec3603593924] + ignore line: [/usr/bin/cmake -E cmake_link_script CMakeFiles/cmTryCompileExec3603593924.dir/link.txt --verbose=1] + ignore line: [/usr/bin/cc -v CMakeFiles/cmTryCompileExec3603593924.dir/CMakeCCompilerABI.c.o -o cmTryCompileExec3603593924 -rdynamic ] + ignore line: [Using built-in specs.] + ignore line: [COLLECT_GCC=/usr/bin/cc] + ignore line: [COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/4.8/lto-wrapper] + ignore line: [Target: x86_64-linux-gnu] + ignore line: [Configured with: ../src/configure -v --with-pkgversion='Ubuntu 4.8.4-2ubuntu1~14.04' --with-bugurl=file:///usr/share/doc/gcc-4.8/README.Bugs --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-4.8 --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --with-gxx-include-dir=/usr/include/c++/4.8 --libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-gnu-unique-object --disable-libmudflap --enable-plugin --with-system-zlib --disable-browser-plugin --enable-java-awt=gtk --enable-gtk-cairo --with-java-home=/usr/lib/jvm/java-1.5.0-gcj-4.8-amd64/jre --enable-java-home --with-jvm-root-dir=/usr/lib/jvm/java-1.5.0-gcj-4.8-amd64 --with-jvm-jar-dir=/usr/lib/jvm-exports/java-1.5.0-gcj-4.8-amd64 --with-arch-directory=amd64 --with-ecj-jar=/usr/share/java/eclipse-ecj.jar --enable-objc-gc --enable-multiarch --disable-werror --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --with-tune=generic --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu] + ignore line: [Thread model: posix] + ignore line: [gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04) ] + ignore line: [COMPILER_PATH=/usr/lib/gcc/x86_64-linux-gnu/4.8/:/usr/lib/gcc/x86_64-linux-gnu/4.8/:/usr/lib/gcc/x86_64-linux-gnu/:/usr/lib/gcc/x86_64-linux-gnu/4.8/:/usr/lib/gcc/x86_64-linux-gnu/] + ignore line: [LIBRARY_PATH=/usr/lib/gcc/x86_64-linux-gnu/4.8/:/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu/:/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../../lib/:/lib/x86_64-linux-gnu/:/lib/../lib/:/usr/lib/x86_64-linux-gnu/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../:/lib/:/usr/lib/] + ignore line: [COLLECT_GCC_OPTIONS='-v' '-o' 'cmTryCompileExec3603593924' '-rdynamic' '-mtune=generic' '-march=x86-64'] + link line: [ /usr/lib/gcc/x86_64-linux-gnu/4.8/collect2 --sysroot=/ --build-id --eh-frame-hdr -m elf_x86_64 --hash-style=gnu --as-needed -export-dynamic -dynamic-linker /lib64/ld-linux-x86-64.so.2 -z relro -o cmTryCompileExec3603593924 /usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu/crt1.o /usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu/crti.o /usr/lib/gcc/x86_64-linux-gnu/4.8/crtbegin.o -L/usr/lib/gcc/x86_64-linux-gnu/4.8 -L/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu -L/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../../lib -L/lib/x86_64-linux-gnu -L/lib/../lib -L/usr/lib/x86_64-linux-gnu -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-linux-gnu/4.8/../../.. CMakeFiles/cmTryCompileExec3603593924.dir/CMakeCCompilerABI.c.o -lgcc --as-needed -lgcc_s --no-as-needed -lc -lgcc --as-needed -lgcc_s --no-as-needed /usr/lib/gcc/x86_64-linux-gnu/4.8/crtend.o /usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu/crtn.o] + arg [/usr/lib/gcc/x86_64-linux-gnu/4.8/collect2] ==> ignore + arg [--sysroot=/] ==> ignore + arg [--build-id] ==> ignore + arg [--eh-frame-hdr] ==> ignore + arg [-m] ==> ignore + arg [elf_x86_64] ==> ignore + arg [--hash-style=gnu] ==> ignore + arg [--as-needed] ==> ignore + arg [-export-dynamic] ==> ignore + arg [-dynamic-linker] ==> ignore + arg [/lib64/ld-linux-x86-64.so.2] ==> ignore + arg [-zrelro] ==> ignore + arg [-o] ==> ignore + arg [cmTryCompileExec3603593924] ==> ignore + arg [/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu/crt1.o] ==> ignore + arg [/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu/crti.o] ==> ignore + arg [/usr/lib/gcc/x86_64-linux-gnu/4.8/crtbegin.o] ==> ignore + arg [-L/usr/lib/gcc/x86_64-linux-gnu/4.8] ==> dir [/usr/lib/gcc/x86_64-linux-gnu/4.8] + arg [-L/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu] ==> dir [/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu] + arg [-L/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../../lib] ==> dir [/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../../lib] + arg [-L/lib/x86_64-linux-gnu] ==> dir [/lib/x86_64-linux-gnu] + arg [-L/lib/../lib] ==> dir [/lib/../lib] + arg [-L/usr/lib/x86_64-linux-gnu] ==> dir [/usr/lib/x86_64-linux-gnu] + arg [-L/usr/lib/../lib] ==> dir [/usr/lib/../lib] + arg [-L/usr/lib/gcc/x86_64-linux-gnu/4.8/../../..] ==> dir [/usr/lib/gcc/x86_64-linux-gnu/4.8/../../..] + arg [CMakeFiles/cmTryCompileExec3603593924.dir/CMakeCCompilerABI.c.o] ==> ignore + arg [-lgcc] ==> lib [gcc] + arg [--as-needed] ==> ignore + arg [-lgcc_s] ==> lib [gcc_s] + arg [--no-as-needed] ==> ignore + arg [-lc] ==> lib [c] + arg [-lgcc] ==> lib [gcc] + arg [--as-needed] ==> ignore + arg [-lgcc_s] ==> lib [gcc_s] + arg [--no-as-needed] ==> ignore + arg [/usr/lib/gcc/x86_64-linux-gnu/4.8/crtend.o] ==> ignore + arg [/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu/crtn.o] ==> ignore + remove lib [gcc] + remove lib [gcc_s] + remove lib [gcc] + remove lib [gcc_s] + collapse library dir [/usr/lib/gcc/x86_64-linux-gnu/4.8] ==> [/usr/lib/gcc/x86_64-linux-gnu/4.8] + collapse library dir [/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu] ==> [/usr/lib/x86_64-linux-gnu] + collapse library dir [/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../../lib] ==> [/usr/lib] + collapse library dir [/lib/x86_64-linux-gnu] ==> [/lib/x86_64-linux-gnu] + collapse library dir [/lib/../lib] ==> [/lib] + collapse library dir [/usr/lib/x86_64-linux-gnu] ==> [/usr/lib/x86_64-linux-gnu] + collapse library dir [/usr/lib/../lib] ==> [/usr/lib] + collapse library dir [/usr/lib/gcc/x86_64-linux-gnu/4.8/../../..] ==> [/usr/lib] + implicit libs: [c] + implicit dirs: [/usr/lib/gcc/x86_64-linux-gnu/4.8;/usr/lib/x86_64-linux-gnu;/usr/lib;/lib/x86_64-linux-gnu;/lib] + implicit fwks: [] + + +Determining if the CXX compiler works passed with the following output: +Change Dir: /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp + +Run Build Command:/usr/bin/make "cmTryCompileExec997608794/fast" +/usr/bin/make -f CMakeFiles/cmTryCompileExec997608794.dir/build.make CMakeFiles/cmTryCompileExec997608794.dir/build +make[1]: Entering directory `/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp' +/usr/bin/cmake -E cmake_progress_report /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp/CMakeFiles 1 +Building CXX object CMakeFiles/cmTryCompileExec997608794.dir/testCXXCompiler.cxx.o +/usr/bin/c++ -o CMakeFiles/cmTryCompileExec997608794.dir/testCXXCompiler.cxx.o -c /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp/testCXXCompiler.cxx +Linking CXX executable cmTryCompileExec997608794 +/usr/bin/cmake -E cmake_link_script CMakeFiles/cmTryCompileExec997608794.dir/link.txt --verbose=1 +/usr/bin/c++ CMakeFiles/cmTryCompileExec997608794.dir/testCXXCompiler.cxx.o -o cmTryCompileExec997608794 -rdynamic +make[1]: Leaving directory `/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp' + + +Detecting CXX compiler ABI info compiled with the following output: +Change Dir: /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp + +Run Build Command:/usr/bin/make "cmTryCompileExec2573420878/fast" +/usr/bin/make -f CMakeFiles/cmTryCompileExec2573420878.dir/build.make CMakeFiles/cmTryCompileExec2573420878.dir/build +make[1]: Entering directory `/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp' +/usr/bin/cmake -E cmake_progress_report /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp/CMakeFiles 1 +Building CXX object CMakeFiles/cmTryCompileExec2573420878.dir/CMakeCXXCompilerABI.cpp.o +/usr/bin/c++ -o CMakeFiles/cmTryCompileExec2573420878.dir/CMakeCXXCompilerABI.cpp.o -c /usr/share/cmake-2.8/Modules/CMakeCXXCompilerABI.cpp +Linking CXX executable cmTryCompileExec2573420878 +/usr/bin/cmake -E cmake_link_script CMakeFiles/cmTryCompileExec2573420878.dir/link.txt --verbose=1 +/usr/bin/c++ -v CMakeFiles/cmTryCompileExec2573420878.dir/CMakeCXXCompilerABI.cpp.o -o cmTryCompileExec2573420878 -rdynamic +Using built-in specs. +COLLECT_GCC=/usr/bin/c++ +COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/4.8/lto-wrapper +Target: x86_64-linux-gnu +Configured with: ../src/configure -v --with-pkgversion='Ubuntu 4.8.4-2ubuntu1~14.04' --with-bugurl=file:///usr/share/doc/gcc-4.8/README.Bugs --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-4.8 --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --with-gxx-include-dir=/usr/include/c++/4.8 --libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-gnu-unique-object --disable-libmudflap --enable-plugin --with-system-zlib --disable-browser-plugin --enable-java-awt=gtk --enable-gtk-cairo --with-java-home=/usr/lib/jvm/java-1.5.0-gcj-4.8-amd64/jre --enable-java-home --with-jvm-root-dir=/usr/lib/jvm/java-1.5.0-gcj-4.8-amd64 --with-jvm-jar-dir=/usr/lib/jvm-exports/java-1.5.0-gcj-4.8-amd64 --with-arch-directory=amd64 --with-ecj-jar=/usr/share/java/eclipse-ecj.jar --enable-objc-gc --enable-multiarch --disable-werror --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --with-tune=generic --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu +Thread model: posix +gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04) +COMPILER_PATH=/usr/lib/gcc/x86_64-linux-gnu/4.8/:/usr/lib/gcc/x86_64-linux-gnu/4.8/:/usr/lib/gcc/x86_64-linux-gnu/:/usr/lib/gcc/x86_64-linux-gnu/4.8/:/usr/lib/gcc/x86_64-linux-gnu/ +LIBRARY_PATH=/usr/lib/gcc/x86_64-linux-gnu/4.8/:/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu/:/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../../lib/:/lib/x86_64-linux-gnu/:/lib/../lib/:/usr/lib/x86_64-linux-gnu/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../:/lib/:/usr/lib/ +COLLECT_GCC_OPTIONS='-v' '-o' 'cmTryCompileExec2573420878' '-rdynamic' '-shared-libgcc' '-mtune=generic' '-march=x86-64' + /usr/lib/gcc/x86_64-linux-gnu/4.8/collect2 --sysroot=/ --build-id --eh-frame-hdr -m elf_x86_64 --hash-style=gnu --as-needed -export-dynamic -dynamic-linker /lib64/ld-linux-x86-64.so.2 -z relro -o cmTryCompileExec2573420878 /usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu/crt1.o /usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu/crti.o /usr/lib/gcc/x86_64-linux-gnu/4.8/crtbegin.o -L/usr/lib/gcc/x86_64-linux-gnu/4.8 -L/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu -L/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../../lib -L/lib/x86_64-linux-gnu -L/lib/../lib -L/usr/lib/x86_64-linux-gnu -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-linux-gnu/4.8/../../.. CMakeFiles/cmTryCompileExec2573420878.dir/CMakeCXXCompilerABI.cpp.o -lstdc++ -lm -lgcc_s -lgcc -lc -lgcc_s -lgcc /usr/lib/gcc/x86_64-linux-gnu/4.8/crtend.o /usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu/crtn.o +make[1]: Leaving directory `/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp' + + +Parsed CXX implicit link information from above output: + link line regex: [^( *|.*[/\])(ld|([^/\]+-)?ld|collect2)[^/\]*( |$)] + ignore line: [Change Dir: /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp] + ignore line: [] + ignore line: [Run Build Command:/usr/bin/make "cmTryCompileExec2573420878/fast"] + ignore line: [/usr/bin/make -f CMakeFiles/cmTryCompileExec2573420878.dir/build.make CMakeFiles/cmTryCompileExec2573420878.dir/build] + ignore line: [make[1]: Entering directory `/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp'] + ignore line: [/usr/bin/cmake -E cmake_progress_report /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp/CMakeFiles 1] + ignore line: [Building CXX object CMakeFiles/cmTryCompileExec2573420878.dir/CMakeCXXCompilerABI.cpp.o] + ignore line: [/usr/bin/c++ -o CMakeFiles/cmTryCompileExec2573420878.dir/CMakeCXXCompilerABI.cpp.o -c /usr/share/cmake-2.8/Modules/CMakeCXXCompilerABI.cpp] + ignore line: [Linking CXX executable cmTryCompileExec2573420878] + ignore line: [/usr/bin/cmake -E cmake_link_script CMakeFiles/cmTryCompileExec2573420878.dir/link.txt --verbose=1] + ignore line: [/usr/bin/c++ -v CMakeFiles/cmTryCompileExec2573420878.dir/CMakeCXXCompilerABI.cpp.o -o cmTryCompileExec2573420878 -rdynamic ] + ignore line: [Using built-in specs.] + ignore line: [COLLECT_GCC=/usr/bin/c++] + ignore line: [COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/4.8/lto-wrapper] + ignore line: [Target: x86_64-linux-gnu] + ignore line: [Configured with: ../src/configure -v --with-pkgversion='Ubuntu 4.8.4-2ubuntu1~14.04' --with-bugurl=file:///usr/share/doc/gcc-4.8/README.Bugs --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-4.8 --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --with-gxx-include-dir=/usr/include/c++/4.8 --libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-gnu-unique-object --disable-libmudflap --enable-plugin --with-system-zlib --disable-browser-plugin --enable-java-awt=gtk --enable-gtk-cairo --with-java-home=/usr/lib/jvm/java-1.5.0-gcj-4.8-amd64/jre --enable-java-home --with-jvm-root-dir=/usr/lib/jvm/java-1.5.0-gcj-4.8-amd64 --with-jvm-jar-dir=/usr/lib/jvm-exports/java-1.5.0-gcj-4.8-amd64 --with-arch-directory=amd64 --with-ecj-jar=/usr/share/java/eclipse-ecj.jar --enable-objc-gc --enable-multiarch --disable-werror --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --with-tune=generic --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu] + ignore line: [Thread model: posix] + ignore line: [gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04) ] + ignore line: [COMPILER_PATH=/usr/lib/gcc/x86_64-linux-gnu/4.8/:/usr/lib/gcc/x86_64-linux-gnu/4.8/:/usr/lib/gcc/x86_64-linux-gnu/:/usr/lib/gcc/x86_64-linux-gnu/4.8/:/usr/lib/gcc/x86_64-linux-gnu/] + ignore line: [LIBRARY_PATH=/usr/lib/gcc/x86_64-linux-gnu/4.8/:/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu/:/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../../lib/:/lib/x86_64-linux-gnu/:/lib/../lib/:/usr/lib/x86_64-linux-gnu/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../:/lib/:/usr/lib/] + ignore line: [COLLECT_GCC_OPTIONS='-v' '-o' 'cmTryCompileExec2573420878' '-rdynamic' '-shared-libgcc' '-mtune=generic' '-march=x86-64'] + link line: [ /usr/lib/gcc/x86_64-linux-gnu/4.8/collect2 --sysroot=/ --build-id --eh-frame-hdr -m elf_x86_64 --hash-style=gnu --as-needed -export-dynamic -dynamic-linker /lib64/ld-linux-x86-64.so.2 -z relro -o cmTryCompileExec2573420878 /usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu/crt1.o /usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu/crti.o /usr/lib/gcc/x86_64-linux-gnu/4.8/crtbegin.o -L/usr/lib/gcc/x86_64-linux-gnu/4.8 -L/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu -L/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../../lib -L/lib/x86_64-linux-gnu -L/lib/../lib -L/usr/lib/x86_64-linux-gnu -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-linux-gnu/4.8/../../.. CMakeFiles/cmTryCompileExec2573420878.dir/CMakeCXXCompilerABI.cpp.o -lstdc++ -lm -lgcc_s -lgcc -lc -lgcc_s -lgcc /usr/lib/gcc/x86_64-linux-gnu/4.8/crtend.o /usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu/crtn.o] + arg [/usr/lib/gcc/x86_64-linux-gnu/4.8/collect2] ==> ignore + arg [--sysroot=/] ==> ignore + arg [--build-id] ==> ignore + arg [--eh-frame-hdr] ==> ignore + arg [-m] ==> ignore + arg [elf_x86_64] ==> ignore + arg [--hash-style=gnu] ==> ignore + arg [--as-needed] ==> ignore + arg [-export-dynamic] ==> ignore + arg [-dynamic-linker] ==> ignore + arg [/lib64/ld-linux-x86-64.so.2] ==> ignore + arg [-zrelro] ==> ignore + arg [-o] ==> ignore + arg [cmTryCompileExec2573420878] ==> ignore + arg [/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu/crt1.o] ==> ignore + arg [/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu/crti.o] ==> ignore + arg [/usr/lib/gcc/x86_64-linux-gnu/4.8/crtbegin.o] ==> ignore + arg [-L/usr/lib/gcc/x86_64-linux-gnu/4.8] ==> dir [/usr/lib/gcc/x86_64-linux-gnu/4.8] + arg [-L/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu] ==> dir [/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu] + arg [-L/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../../lib] ==> dir [/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../../lib] + arg [-L/lib/x86_64-linux-gnu] ==> dir [/lib/x86_64-linux-gnu] + arg [-L/lib/../lib] ==> dir [/lib/../lib] + arg [-L/usr/lib/x86_64-linux-gnu] ==> dir [/usr/lib/x86_64-linux-gnu] + arg [-L/usr/lib/../lib] ==> dir [/usr/lib/../lib] + arg [-L/usr/lib/gcc/x86_64-linux-gnu/4.8/../../..] ==> dir [/usr/lib/gcc/x86_64-linux-gnu/4.8/../../..] + arg [CMakeFiles/cmTryCompileExec2573420878.dir/CMakeCXXCompilerABI.cpp.o] ==> ignore + arg [-lstdc++] ==> lib [stdc++] + arg [-lm] ==> lib [m] + arg [-lgcc_s] ==> lib [gcc_s] + arg [-lgcc] ==> lib [gcc] + arg [-lc] ==> lib [c] + arg [-lgcc_s] ==> lib [gcc_s] + arg [-lgcc] ==> lib [gcc] + arg [/usr/lib/gcc/x86_64-linux-gnu/4.8/crtend.o] ==> ignore + arg [/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu/crtn.o] ==> ignore + remove lib [gcc_s] + remove lib [gcc] + remove lib [gcc_s] + remove lib [gcc] + collapse library dir [/usr/lib/gcc/x86_64-linux-gnu/4.8] ==> [/usr/lib/gcc/x86_64-linux-gnu/4.8] + collapse library dir [/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu] ==> [/usr/lib/x86_64-linux-gnu] + collapse library dir [/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../../lib] ==> [/usr/lib] + collapse library dir [/lib/x86_64-linux-gnu] ==> [/lib/x86_64-linux-gnu] + collapse library dir [/lib/../lib] ==> [/lib] + collapse library dir [/usr/lib/x86_64-linux-gnu] ==> [/usr/lib/x86_64-linux-gnu] + collapse library dir [/usr/lib/../lib] ==> [/usr/lib] + collapse library dir [/usr/lib/gcc/x86_64-linux-gnu/4.8/../../..] ==> [/usr/lib] + implicit libs: [stdc++;m;c] + implicit dirs: [/usr/lib/gcc/x86_64-linux-gnu/4.8;/usr/lib/x86_64-linux-gnu;/usr/lib;/lib/x86_64-linux-gnu;/lib] + implicit fwks: [] + + diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Makefile.cmake b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Makefile.cmake new file mode 100644 index 0000000000..119272f1f1 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Makefile.cmake @@ -0,0 +1,43 @@ +# CMAKE generated file: DO NOT EDIT! +# Generated by "Unix Makefiles" Generator, CMake Version 2.8 + +# The generator used is: +SET(CMAKE_DEPENDS_GENERATOR "Unix Makefiles") + +# The top level Makefile was generated from the following files: +SET(CMAKE_MAKEFILE_DEPENDS + "CMakeCache.txt" + "../CMakeLists.txt" + "CMakeFiles/2.8.12.2/CMakeCCompiler.cmake" + "CMakeFiles/2.8.12.2/CMakeCXXCompiler.cmake" + "CMakeFiles/2.8.12.2/CMakeSystem.cmake" + "/usr/share/cmake-2.8/Modules/CMakeCInformation.cmake" + "/usr/share/cmake-2.8/Modules/CMakeCXXInformation.cmake" + "/usr/share/cmake-2.8/Modules/CMakeCommonLanguageInclude.cmake" + "/usr/share/cmake-2.8/Modules/CMakeGenericSystem.cmake" + "/usr/share/cmake-2.8/Modules/CMakeSystemSpecificInformation.cmake" + "/usr/share/cmake-2.8/Modules/Compiler/GNU-C.cmake" + "/usr/share/cmake-2.8/Modules/Compiler/GNU-CXX.cmake" + "/usr/share/cmake-2.8/Modules/Compiler/GNU.cmake" + "/usr/share/cmake-2.8/Modules/Platform/Linux-GNU-C.cmake" + "/usr/share/cmake-2.8/Modules/Platform/Linux-GNU-CXX.cmake" + "/usr/share/cmake-2.8/Modules/Platform/Linux-GNU.cmake" + "/usr/share/cmake-2.8/Modules/Platform/Linux.cmake" + "/usr/share/cmake-2.8/Modules/Platform/UnixPaths.cmake" + ) + +# The corresponding makefile is: +SET(CMAKE_MAKEFILE_OUTPUTS + "Makefile" + "CMakeFiles/cmake.check_cache" + ) + +# Byproducts of CMake generate step: +SET(CMAKE_MAKEFILE_PRODUCTS + "CMakeFiles/CMakeDirectoryInformation.cmake" + ) + +# Dependency information for all targets: +SET(CMAKE_DEPEND_INFO_FILES + "CMakeFiles/Si5351C.dir/DependInfo.cmake" + ) diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Makefile2 b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Makefile2 new file mode 100644 index 0000000000..16016a9bd2 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Makefile2 @@ -0,0 +1,102 @@ +# CMAKE generated file: DO NOT EDIT! +# Generated by "Unix Makefiles" Generator, CMake Version 2.8 + +# Default target executed when no arguments are given to make. +default_target: all +.PHONY : default_target + +# The main recursive all target +all: +.PHONY : all + +# The main recursive preinstall target +preinstall: +.PHONY : preinstall + +#============================================================================= +# Special targets provided by cmake. + +# Disable implicit rules so canonical targets will work. +.SUFFIXES: + +# Remove some rules from gmake that .SUFFIXES does not remove. +SUFFIXES = + +.SUFFIXES: .hpux_make_needs_suffix_list + +# Suppress display of executed commands. +$(VERBOSE).SILENT: + +# A target that is always out of date. +cmake_force: +.PHONY : cmake_force + +#============================================================================= +# Set environment variables for the build. + +# The shell in which to execute make rules. +SHELL = /bin/sh + +# The CMake executable. +CMAKE_COMMAND = /usr/bin/cmake + +# The command to remove a file. +RM = /usr/bin/cmake -E remove -f + +# Escaping for special characters. +EQUALS = = + +# The program to use to edit the cache. +CMAKE_EDIT_COMMAND = /usr/bin/ccmake + +# The top-level source directory on which CMake was run. +CMAKE_SOURCE_DIR = /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C + +# The top-level build directory on which CMake was run. +CMAKE_BINARY_DIR = /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build + +#============================================================================= +# Target rules for target CMakeFiles/Si5351C.dir + +# All Build rule for target. +CMakeFiles/Si5351C.dir/all: + $(MAKE) -f CMakeFiles/Si5351C.dir/build.make CMakeFiles/Si5351C.dir/depend + $(MAKE) -f CMakeFiles/Si5351C.dir/build.make CMakeFiles/Si5351C.dir/build + $(CMAKE_COMMAND) -E cmake_progress_report /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles 1 + @echo "Built target Si5351C" +.PHONY : CMakeFiles/Si5351C.dir/all + +# Include target in all. +all: CMakeFiles/Si5351C.dir/all +.PHONY : all + +# Build rule for subdir invocation for target. +CMakeFiles/Si5351C.dir/rule: cmake_check_build_system + $(CMAKE_COMMAND) -E cmake_progress_start /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles 1 + $(MAKE) -f CMakeFiles/Makefile2 CMakeFiles/Si5351C.dir/all + $(CMAKE_COMMAND) -E cmake_progress_start /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles 0 +.PHONY : CMakeFiles/Si5351C.dir/rule + +# Convenience name for target. +Si5351C: CMakeFiles/Si5351C.dir/rule +.PHONY : Si5351C + +# clean rule for target. +CMakeFiles/Si5351C.dir/clean: + $(MAKE) -f CMakeFiles/Si5351C.dir/build.make CMakeFiles/Si5351C.dir/clean +.PHONY : CMakeFiles/Si5351C.dir/clean + +# clean rule for target. +clean: CMakeFiles/Si5351C.dir/clean +.PHONY : clean + +#============================================================================= +# Special targets to cleanup operation of make. + +# Special rule to run CMake to check the build system integrity. +# No rule that depends on this can have commands that come from listfiles +# because they might be regenerated. +cmake_check_build_system: + $(CMAKE_COMMAND) -H$(CMAKE_SOURCE_DIR) -B$(CMAKE_BINARY_DIR) --check-build-system CMakeFiles/Makefile.cmake 0 +.PHONY : cmake_check_build_system + diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/CXX.includecache b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/CXX.includecache new file mode 100644 index 0000000000..b84d7a1def --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/CXX.includecache @@ -0,0 +1,8 @@ +#IncludeRegexLine: ^[ ]*#[ ]*(include|import)[ ]*[<"]([^">]+)([">]) + +#IncludeRegexScan: ^.*$ + +#IncludeRegexComplain: ^$ + +#IncludeRegexTransform: + diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/DependInfo.cmake b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/DependInfo.cmake new file mode 100644 index 0000000000..8fbd267efc --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/DependInfo.cmake @@ -0,0 +1,22 @@ +# The set of languages for which implicit dependencies are needed: +SET(CMAKE_DEPENDS_LANGUAGES + "CXX" + ) +# The set of files for implicit dependencies of each language: +SET(CMAKE_DEPENDS_CHECK_CXX + "/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/Si5351C.cpp" "/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/Si5351C.o" + ) +SET(CMAKE_CXX_COMPILER_ID "GNU") + +# Targets to which this target links. +SET(CMAKE_TARGET_LINKED_INFO_FILES + ) + +# The include file search paths: +SET(CMAKE_C_TARGET_INCLUDE_PATH + "../../lms7002m" + ".." + ) +SET(CMAKE_CXX_TARGET_INCLUDE_PATH ${CMAKE_C_TARGET_INCLUDE_PATH}) +SET(CMAKE_Fortran_TARGET_INCLUDE_PATH ${CMAKE_C_TARGET_INCLUDE_PATH}) +SET(CMAKE_ASM_TARGET_INCLUDE_PATH ${CMAKE_C_TARGET_INCLUDE_PATH}) diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/Si5351C.o b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/Si5351C.o new file mode 100644 index 0000000000000000000000000000000000000000..9c3483db4eb7c2c2bfd8b4bd29d4f87b7c961757 GIT binary patch literal 144184 zcmeFa4R}?>wKqP=A%F@dDk@rPV~Q5PFo6I;Q3K@Qi3AdppjOetAvqx_`8Z8Z_^@cv z5K9`dRHe1I)>5mjw^}dPqNR#8C^I6I6bZ%G0RKr?P;`u~eQ(aJMAG z%6U{?N#$p$yoSp8R9;8r0xB0$Sx03(l}RcWQQ1W0=crsvWiyqnRJKw1c`DnfOjEgp z%B55;r}BC#zd+>*DsQB6C6zZ(*+u0lDsQ3kOH}qy`DH3^rSdi^*HZaaD(|3j9hG0F z@*7lslghiP{1%n>P`RGUd#U^`mG@D3Kb7C7@&PJ;K;?r}{*cOtsoX&2BUEmr@=+>( zOywpjAE$CNl|QBODJr*6`3#j?sr(t0+o;?@<+D^iN99f`pQrLgD*LH?iOOG4`AaHa zq4HN$?xONHRK7~(YgF#0@(n8Ar1C8)_fYvZl>=1%iON4yxu42+sCFfHaCjKPt{V=rWhcYG!@hVNin|MBbo z9qZ}b73-PT|88zxblEPQ!-1Z8V8R1X z1zG~$b;AMH`KD+O)$jE@jrW3AFH=Z=Po6O3^xB$O*S>t{!!B$X>*^c+1Pl@@@7X$# zSJCrFTnSlu*VfUou7Rvr*M}c>zD?~)o)~6mm+xtpQv%!`$93+f$SKydopanC-G?6s z#`i||V*A6tz`task7SlzbOw`L=guIRpOXb`*T=kTF@JJ$lO z1MRxD=3g^?{V0gjmIiWRabO< zR@V*dhu!$Z_UL`N$Zd9S^gcT)s07Ddv$hb70j5}uQ)NxnaNrJ#_krTC$PRZ!?*q>F z&A;(KwnraWN1PwX#QA|ibABM}rW+pk0r0%>A+XPXTKWc6581112Isw6v-U#lpubnV z7RHbFRrplb{;XAf>0x{{2QHEgpbh>v4@Ud=*qS-u2QR>oe%#*^eW>e(hgj$E-sr}z z16h(T=LzVI5J;}tvuohgSkE(D2ZCZfFxiDr@V#Z%NYCrqmxta5!C-%^>xTWT^OT<; zx5ux8K5+Mc3O{mp0`(4nR{LW;dCv;Jt%=>VFE$ip_dL1j?;n30>v?no6!o#*A!m#O zs#s5SPf=fNO?N-9BZ# z=XMc|b06!*+G(He%pQnC8~os!y)bFA2a>>K2MS-aZYwWb?Rc!_J?-tr>fUwOw&$f- z?>gSQyJ%L+4&@BTaVBl~Nal85@v%}-*3jsVb4(bzC_7&FlJcX0)tT>TN+^U;;OShtK9Yf?~D^mI2uvAugU{EOz@-hCI`!3`T| z=;imcl=MK%?dA-!`nQ*k!WP#0ZKbDKE1&M=3t!KSye`f@OK`c6Yp~*0DI}*41mr$e zItI+Py8COOld9RR*L)pnwsqfuI&bT~6ALgtLmNw9UejHuf22+*{;T>rPw}x{)t9?! z8R!YT7U;xlqH7(#(LQ;CxdNr8Al`gu>n1y4Qi0z9H%9?gM!5lc=daJU!k0fa8Sb z4dhV8dPn2zgenJNv8m7G-q{CncAOBBFHzQ_PPn*?04^(^YB>`m-_1!8rbD#=rZ(An~^*8{_Ph110z7Z;}#KN4+qnUO-HD6 zB5-CHOkHAN&u}nZE~jhk868gyhqd`cFbWPN4^!!3o6rKZd*aa=K5y?{4-Eikd*{Q) zUjEUre8qYp3X7P!q#$Ffy}iIJLyOq(43$?62d_+lMvtRPu@Byb#5+UtWuE3A;C`{Y zFLxd69QtBe`(a(!0{PO~frZ<-Q*owi)^Vp^GiR-^tTrR(^?}QKreg;2kY@LS2SLUS zGWad6IwR==E;&n9b#bF+bv=ou&dI$EU2uE%eef^WXM6Wcoto|cPt;I2dKr~ zM}efb8$a3xsk<*d*4l!y0|?vM0}ar9#~FKB?>f%5?&mSc&bGXs0~y*%l#}&btoO3v zG$4N^3-i!F*2RIR#)={M3vS_N4)5aHLhq6Lu-w}&7A~zfypS6s_YPc6&e3@SlOA5D zgP6wmaGSYMpY32QaXhh)YC7UV@-TL)S1{=ATQ=<77;MW2PK?2V_0rp2yR%|PJ&n-Q z@8(|B2kkKPgY7-Izee+pp9Z0)Vc#xk#HMoDFvNGb*(3BEG=27+-0QY9z|Ow`w*H!^ z5!<^T0;%X7d#hnL+RHy?9&jWuv~UJIXD=SMSXiwYk!`5~=kDdR5}j1d${@Re!KUYB z;24wE^te^`ZQQ>toq-$~QeR``zoY|u9}dtagE(|&VzNJ%r>V5zKffW ztSB}Rxwqc^Pw*X2&QHq+ZVxQW$6g+pHb_Usqf6L@n%$5(gOSP7LU+_JWMTykPlGs- zvlq|it?WGOl|?AFqV>w!0@o{RWy-Svz0cPxYx94}dgaMDGH5&K^$I%x5gQ9wug-+R zwO;K30E3g)XJ8ei^=c!vp!Etr8iJGN6_yr`SD4l-PITngD`X43$KuGXS7@`CzTkT1 zTMz6jGOSl!PjaJo9xLNYPdDc%)~DE-*l4KW$Y4S2Y7JO#J$g#lT7IjUqWcrGYZV=7w1&QO3+4k!c5N8%N@e*0ijntqeA@D z4OR)(#l^v@ht1@wx5TjOxs%9&MdG|y9a;@U1fY^v0$e**iRnjZ5)*q1nch2x$2V=o zQ%8AzJbfNMjk#$bK8b)+-~*^=Z#OUSXkXr@O6Yd_Cbsv!Nk3t;p82#qUHB;;Og@zd z|KK49gWPrv-&Z-QFwt&Xi3jVj4;&$9=#HcK*#L@zCo)(I)Iw(O8f+D-dp6d!C7bUN zvUb2k8wD8xKDFUIdba%Ht)Bfy^(&&){ODd(!c!60R`8zOwQUuDoC9k(GF_8`d=YQ- zCb^G^Hi}n91^Tw^9tLu^ND1nRk<@;j(EjJ}Lavr1!U50^Dq1kMe>mO~DeebtDL%0U8FV#13wuRAoW_ukxvpueR zzlbX-)C8Q_rC~3Z;b`Kj1V)0G^mkQe@L}92z@Y{=%%fGjSR?H4BAkeVHt?L8mpl~o zehXWc_1=#y%X)vvTPlOP)h+A!voxklnX;a@jCjv$63(dZ2-sW<<4d+l^iUcRSvNGYS8T3EU)bWWoK& z@%Z^$V3j|&ucv!7Pz!ECL_dgFCqy7)5V{ADAMQ~?p_%Z+Z+!3})b^2p&vs)I5WtDw z$(`TdkUQ>a5;BGhL4G~m`TQRL-Lhx6iW5Wz`gq}6ZyK+3doZ5|@qxcLP#mIN;=rqm=TfkX#b5!u*mK^8fG7AvQgs4hhJW$@91#e-2i_1iC_1cUC#hd`=gqvV{cOIyNA$IQr5cGQaN4~P3N-KNs z8XhZo1-<{31tSy4sMMww6 zaT!R{(|s<#7i$NsaVS2++5t-?w%BsOw06k#9M)vfC@%viScOoH3@u@F)^hLMl>0WN1EeG=K8!jOYau~dUhiWPdkW07ZV$4CPwV;mO<)wknYh<#O zeASZ2VOT}-Kyp^@ZL|OJ@yGJbs}w*o2EnUwE#g(HLJb|bL}2JcvgN=z0z=nO*vSIZ zr+_>#(WPjwZpCieiiaccvgh<`oj14e0XLkNG;-eSu7aXxM_JF)rK=yUhx^q$#a+Fw z7VcL*iO8_rFX20+v74U6wwHVg-tjq(K41=#drL0Vnod$yLUV2R(A$ml>S4`bH;OSJ z%6;rxs0qY+M!h)z*l|x0;@EiO8_a(d`Y-$AwlsA}sB_9~SQ1 z$JTL$d-+RnuI85hK71FmXFt4_y{Bi+{?*ako*5&Y_dfGM)}9!WT3>iRi1`n`@O)5z;rXEFh37p^#@rP>2roPzlrKC# zOK&Q6?P~;Kcfm`h`0fFe^3=oijx)Y>xGnl1WE0T`W2U#6AH>&SOjW=X7(+57{+kCM zGQK#Qv-dKbOl$ay$N4Uo%zX^}rfchQn`$89^>G5ZEcjN$N09p z@C=Q?_9%bb9X!D{+!>sNyO-t(cLjI?y?T8JuTWzr_`Cb?1~q&qq^A?U$8a#K^D{Ty zZ~*rWou@g+BmAk1XJaL%#!s;+elv&d*#Iw_T>A{%*{*r5i(A{4w&r)F6Y0(lmftBp zJI%9L_V5V27oEd~vSDmEJBl66j$tF%NOmmC9g>)hvs2iq z>=P@;uumRy+WDVi`RsI7z&_2!vNPD3>@#c}JByvo&dEBLoi}nkJD(M@A~u0d%qnJ+ zMowl^SP7fTE?^gCO=B00yqI0WO4)QagU!q;W6_bb*rhDS%GqUXc2)(OGjcAgWL4~P zR?TX%YT3MzSFkJDRqV6u>eH?{Z9cn}UB}{V0ZXujtd7;QBx_)cSR-pam-NbHYU2GNWX1A~}vDK`HeVO&L zTiF_R8~X}d%f8BPXLqnW**f+$_H}j_`v&_r_Dyy-`xd*0eVeUk-(mN%@3Q;Y{p@?} z`|JVs@9YQcLG}>)A$yqp2iw5@lRd(I#5S@=3m;=Y{`sZ_KUwfNd!lbMdlEL^Pq99> zg+0xlVO!bH*f#j4=nnQQdyf4V+sU41FTl4#``JtE=j<2kW%f(<3i}n?#eU6x!+y(N zW&b_$HTFBUo4wB7V83T?vOlo5*dN8o9t`gJjcqN-^HYgbQ*(1$>-lY|WNV_Sy{R>w zY;Q=^B_}O9Kb>e_luUP=KfQWp?EH#3H8o|`=g+H&R@YQbpBX*BqI|~rHBFNyPAZxy z%kg!o6l-Z+lz;j~`K_JJ&8c)d`*d_}S-h&ca#ndol%3IZ?itJ2%!=78zoD`-oqth2 z%bydwp5^Dy>1<9nbu4d9H|Cc$EorJxwnG(oM^#0|bo^%qw5iUorz)iDXzOgROCk$# zkuLe??aKMSeMa>YCf?7U$Qs zwKg;@>IBOy%5P|E&u?jKPv)l^6Rr70lL}G${MNQ~ep5@TIoXl~>(vt@hY$33vPByt zO)g2cay1qu+kw_aH|0?1u9#Vw-_V}?d}p$?Zn?4`J?_%P1^7)8^ z0yr#=W-Xl^>HLLB_%FRQ2{tHM48}~f*5?;ZE(E)d=ROig3&S8UN!F#?+Ap{uJ|~_8 zTZ4zjQCd9FxlD{320O@yeb>CXv*%V`IoF3DDiFP5#^gh#HPMwdEo!>79r|yoJOm8+ zRVV8YfznI@{hea2IW+X@@~Wz6^`X(4sA^!6Ce!&d+7j(Yq|?~n_>u`GQHO-pq}!8; zmO~;n63uOcc#$wx9THfUNGEDiiT1^ZMC~W4o^{@lWXE9PnOs;n;k zC+HVFk_y(el_jf>;COf~dZgpmyty^=s;VlhYoldeQHS(-Ze?x$^ed*9S4^J)EBxVK zbC$O^CF+X~pAm5o{EpmwKGO3qRyC)nu(0q5_xH$!?AV;DBgf3p%XzK!$%dxZWc~TG z5>3sW?MY9YnQfR_L0;v-`3VOu+-tPZH%RVOJ^txvW#S$o0Q6+|kyhH#i%bkkdh)L0G<*M;;pTGb?Vpo7^Ia@I$r<45cCdj}@;Fam=w=D;ggN|22>y9e2YB-vZ#`V-8}q<# zd+89t4{wJ%wXY29fN7#%LcvnzzHWDkCa2!2ibPoKmP)-@U7D_abI56ntzk_g8zwEF4E;d@u zEgU~95ziva+)==);+K&ZhOplcfm?(oLOK8Wtp04aCtE;;-FS0ncFt?#*h|?t&y8dM zot^X8IJP%C=l*f*ACcb~}+ResVhd^{~4m z@L|<4$3K5M>mKpY2>9@`(K)Z5&iYQdGaEkq{u9Ul?R54Xd>#pEoOnHyzs#zBFTx(n zK7MzE-Aei$I~FQtl>*))5$wd|QuwKqO<95%8L0o+$C1;sPAPy9yMD?m*;%h;K|&9` zVC?2d^qFk#xggQg2CDsSKF&J2H0N(w?7pn|Tu1jO;BiXUaX3chIg7FuqJXTNTE*X9 zC(nQI)D~S?I)OOc0q4rI)KGhMf`n(WKn>r)hm&96v_ICHCm3R}NAeY5Pt|Y|pxB66 zC*>g@?8TRlv4jIp=NoT+7K7|PadjRp zc#Y>8MPWM-&cA^GWoce)>eJ~Ww`TYw2yWH*n{8D*AjV*T22OxDhob1s*(0`1PFN|5C!_+k(Z?gL|+3k__*{X-v~iJluzY8#%IE6<@8mm&Hq?ILG}K~@$lkFFVd zsIvxVGFc3Sp9R0d0DeOeM+6*~i@-R^iR8*@ls2B&XqfHpY2c2CmN+ww`w~f3>QO-S z=;sYNr2IK31#(nWaXS&oaq=i!2tGK(NUkwRnq;U@_E0D}zx z&Jx0Us`B=(0_7o9V>01g;LdBi;Fq91lLq=0&WJ@>bhY! z>)hatho$suUm3C}J)Zne&@|Kf=dKe!Uk2TWOs$79K50u>nRx1xE$k&6!mtWf!B}hp z4jaI>8^jXl*tQ3~4{9|8EGl8_t|$viVFandr{Q2Pr%$l%%9TS{RJ0U7 zD&}u#j>qWJ|2q=&D|BFK@V?S<{}=6_=Z!;L2esSg2NM+i@t$w+ol*But0?9kSNv_W z^vR-o=;g4?IYCp=2yWaPZR@#z>O$O;a|I*v|E{039-sC9_WJ4eFTS>Ab^{DQGK<;; zfx92#@ec4vxR->O5IG;udIs~LUWlo%v$!39as&^|cBtlhTYeJdkm9FU}#&YS7jX0^LFJolyH zfP3wjQN|wLOYKMz@O&*kjZ^oet&CN$%1~6LTma(iXdmLNd|E8Rd|c`TaY-LgdzcdR z|F85XME;b=M~J88nvW2wju8|?IsV@H40e__cX5e3!kc&DC>tI-Z2DW!%d$I-=W_y|` zt&Iam`J$LT;`e|{VF-3WMIS^A=;@pd;_dIQ8~RvhHK+!4r0IpxP3cnI9`M7#{7Z{m z`8839B2J1awwV<@Z@7Eq`h~L9(ci85?ONanU6 zb?%V_e9bH!2S--4XRR6sO~4+W03O{va108QbX{9Z`R@n|PjqZ^0I2u#MA}{xIv;k; z1F6CP&IdIZxKvBCaL4)I`S3q=KG@F=U=Go$>`(P!Mu`q-xeUZ2YkOz?=`n8&WKKBF zmG5ZLJ@>KE5J@2Q*(P2S=Gg`8-?LYbhHMOz9JvPN0SlP*TCQN!mABw?cE32Y?idQt zexBe#$0axKY6vk`h0pyW8O;$2hrA1{{tZvxxHGsqKN6pOzP^9Ci@0K;QteiwBAaWarF_R9xZ3K;X8!& z6}?3J+cNOOUalO(pQQ}Wx_&zF8`~N$bdbMqFhn+VbzXP7L8&08;%**f@u0_*K;vN; zRFO)?10H8iZE6tLP~jJnwQ-h<*S3K5wx{s4Mnqf4sgALnAfeZ7nkTNDaQyLo(Lnyf zt6*8fryKg%I)CZL*bmsZx=ciGqY(?fXVp){#2=iYU?Tz;MWW1y?H~gW-sL-VN=LD> z!>Cu~%jhTP$6@k?g}du%h#BfH*(g6lwej3SDdDPtkP520ObBO*g*+LhXumBAKNgR^ z)XVcsu&Xye!_h`Iz04hA=#z&Z@WOm`k9?s3!zKJZqqH~-?ZK=c)1Y0N93VjnyWqD% zz;5cgbmq(p^2g0v*x8!y%r72aGQRk{37z~?(TzpL;|q(=5-1VyztI8rS=U#ytYvvw zpBOQ0_*%#~@%={rjw6)EW83M+=G~G#bL7xD(17ZuAr9BI_>Zj5zKS#HibWrjuYV?^3#EPTNK@oIwq`5UEDMzkxE9e4QDV+Icwx3z3j>C~^H`lqpxtj~Uu zH^>L*KB~vR0jcUQy*1J`B>QLBXbiykch>OYUq_QXqK*vwJ7;)}$A4sflc>jj>_;4~ zHuzGNw=a=oHgAY>3h7H%7hz+`XPLvNgygJ%(#0p%6^XQEDL(kCsCb=<|42Ub1Rs=h zS3vzHsy|kzFL&s7QN7JK4g}DT=EDuD>HJqX{7b0bCjY7o^l0w|B)=P+!e^&tqqrbk zRaR5G;^RE+D%M199nzH(`SfwTE%Mw*ZO1_AA-p=vuSNK;w0-tM&IfHjiW4*V z&a7U)NXZ#P^rv{`fZs<*4(d}z?Y6?bOCOvck8^h1cUO@-lP}~0?XARTrkBr+4v!tg z!!{m!s2*2R)#t?y{cw0)7cUzI-!K*E%-bPxUyrlzw$iecmvvVC+QvN9teY)E82{%|2CBZ}YPh)!X{F zHlTh(Kz%>eTl-J-*8bz-4%g}UkLvBmHK> zy=xw1&*DN*?ndHa8-tgro_`ZY_MzU<@x1{0QAdFgxNgFKBz?9B{wTkg>T#~BdYY$W z0h&hqU+}Jh7$3JfYv2mvW3$!W0ri`yzFyaZ5)ah#RjRk;ZwCYTkKxILeT|+*^)~tQ zsoo}k1=ZWe@$P{7%>nhVQvD3wJ~udiaFFVs)9Xb_#eIFuF<3!)u=E4X*QZhaS=dO{ zYkoFApne6_Tl-J-HvKnKy-ojDsorM)gH&(Re+>UZ6oX&zF!yg7)!X!+PxYo;5&d%o z)m#0a>Wg*xZO-^@rusAV`UOt?t5k2Br*BgKgXZa2{x@qG{8kBEa-3hwz-`#ePTEwHXA{*gw$pr8-!qDA{X9r~Z2cSq zdoH|e@o5^>+x&4p)tlxtkAGBev(w#FZ;CreznSV?c7(XI9EK_%>bFw=Q2r43UyY@f z4~xScW<4Xx=SF7iVx1lZz-QEGaJG{mKCP^;B;ggFdRCuJhOS>AR`k zW@Cnb5*sdCeLmHnjg917NILqLQoT*T1ypa-Z)Je|^#S#LRBzL7H`Q}9Nd2`lJaH(+ z*tvTD#8#h=Z$2Fmo~hR-wEk1QEk{^D^|m>%lIq9l{I&hqda5_+hcWE|>fdc}@A7e6 ze^)tr?jb%lI}GO=KD!;pQN67nF{-!qqcH=2>_>|93+l%P;$w?B{Zwy?2{>Q(Q@zb! z^Gd!+VlD^TQUmGBQ1JzsmPxZEO+8;olcQPu* z;5Y2xlKN@!vXJU+epD4upQ3skbH!gfD_%?WwwS*mfPa5L{r-UZywRu_oo&nhYx)&Z zy-mL=s<-)9it4T7PxTe3gp{9sDR&U`-wjk>qStF@Wc^e>Td&v74)zDo=W)k{9~jW- zA(r5hg7OQgo=;b)AD!jrLwyz1yY$CcG{f=nbO4V#2f6lL-q4_M3jqh0Al1?myGTko9MtRqsY)*_%Czqw!_XNB+9D3HA1V!g& zrXcY(@SA-#>7t48^0tn6CH%x>OIv-iChqB=ja3=%s8_g$xF$WZC6Ov`X{t#VHzzwf z%3Go}iE{Xmf}gW2pWV_FjYb6{H43OckaZ-}Qy7mHrPWSaQyZ@YDZVaG7C+Tk-U!3c7>yd7 zttRbhBgRJ=y%_CVUfme2G~2sYYFSw`AyEF*RA)yc|Ehfd+qA>4>IF7$h zT3$0bUa_!9`nX5G!x0o>eg$~XH?<0X*<&KCP%4-Fx|?nDpxPW z@L-v?=5RQW`iDD^QjEDP%7JNu${zIj5IfOg)Lky&6-SwpG}6}@{ZT0;tBYdZO z-qEi~m&D7Gkg~QdFRyBBj4r8-*A&I8VHLOK5*gP`drsuBXwd}y2c63?XNWE-OYtG8-IwpoJ3o+Kb#fTBF#K?19x&WUQI;hK-)-&Cde~AgZ3IK} zwD^U~EkZN(`AJbxJf5hpZ--Nswg&f70}E$$jVVhr=OYTm%*Y(18_lOSmIP-aOzZk2 zWe2c2!H*}qHsELpC%K{A#@&RUH4G-dINa>QV5Y%k7l)D=xloLsOsDUM^fS3izj zALmDSO%3tZHagf$K++3gK;)CqU&wwZ#$onX*A{vE29d&+h)$`e3>wC231yVNULMX& z*AhP0nU0u5(lArw@kOnj@w#QpiYB%umrCQo!3F5YG%Tt4_FnXiZHgutrW~w znXWr|G}+?Z8k;+e*l& zIP&y86wRbhiP|(lM(%m9060&G$6FGMlm2{JJ#~V#86uR(r{$9<@a$-mC(-U6!MO=A zbZ6pqZK>sPahB<30^<$SxKZ$_DaL%9pGL!y>E@bg=Y|tsc@PY~dF&@EFLSm%mi>irb57f1dPSK@X-A&+G7aeGNzEXuf|bk{N}yqhKQH6Qg{G`bPs*I# zY$o;8ih@}@U*~17>{O_IrtCp1$%7o$AZG5J3FIT%L30=tRjP2vdI1NIG81%VTtP4> z+Ty{TIJOTsNeH(@lL()qQJ6hBFMz4shEi=akDwLI-1yVycgWO8`QPJ5s}~3-*kBF+AUe z(dQ3)59QUMNpke3`Zp+MZ-g)h{i=c8v)HhgWBQh1{|W7IUvJodwy5WAzJmtXPZyf@ z)8+i^1cE2+wc)W|YPltt!+|hGb6D_wyW5bFFVkrPL>RNF%oEphbmL53;NyLEIWhdR zOPJ4aG>LC}P4^CIm_ECG?g(|?%{1z@gv*%?)|edL8sOhGGq^QodaMDuWN;ohixJOC z`SFYse`bfVA%tmH@^Ux}rylO%)mi>>k1KtX5i*p9?g2S6%DQ>#dQXC2C0+o|kb1(T z!LvC$h7)g{;wGV*z%!0(uKET2NPVX}tfd@l;(umKT@r`P? z+MqR95>C#fB_Tx?W}E9^CbJnBLB!R}X0@7fLbRA~(2BX9?kryKWL0Cu!a_KsQ9Ux9 z3&6WNN)xUJS^?IJ$?fo0(%V|%iMl#?k4JrZ0KV9@D9YdefYaC(d_V?5E`o>xZ%7errWpnoF-J^wx? zwAc0jeF*vm&=#)|qTv016Yiznvb6QTndo%+zYAf%w1NH)A>^+x(7zReewBg#k0I!9 zHPAEgA!#>R+U$3yfj%n){oMxo>=5+#8R#P+=pQoB4+%lP(LkRQf_}4seh*;M?y|Jm zf2)ChZwUIG2Kosh^nckv|8|J^^QwWqIE4H+4fF#ctOwzRW;BG6a2vf&SPK^tA^15h3X38|aS-L0@m6uL?om zY@p8#L7z6z=Y^oh--X6YpTEb2pkHO69~FZBRs;QsA?WWk(4P>3{%!;P@geB%Gti$M zg8m@`{a;}`JXwJ^rS-?6)j!{eRg&9}hwQ zs)2rD2>Le-^pir+?=#R(4nhB(fgW=LX*XHg?03*W|F;nIn5*KY$B&Cc=#R15OMg)a zdW0KPQCzW&{1)5cFvS{g*<}qp#ql&)tLeR^< zoucdC9zy@I2KgN!=+8CKr$f*e8|Xg{(f?@%dImY6w7V>A_LqNCMz`Pc5c*dbP)G`g=mqpKGB1b_n`n1HJk?3tApvn}5>`^!J94 zUuK}kJrTjGw8^h9(BB_|zScnhy%6;C4fIEcnE&+#`hO20zu7?lUquS=zkMJewl&(*bwq74D|mULVm4*{i+?K&^nVCJzsf-WRtWlA4fKBuL4T)#eoqMcyAAYsCOcUB z-DjZxa|rr}4D^2uLBG*J|4s<{%?5frQyy&pw;JgG7J`1Kf&POK^e-Fe@o$L_R{vKG z^nVXQ|E7Wd!w~fQ4D@&=KUn?WGthq&g8ra^{^JnzL+I}}>+64Ri11{~5IP_8-lHZv z59m$(KVTTYmw=bI|5uTGFW;Rcf3-(pudFtU{AWd z89saU|DHvD>mcQS$0EPfApaGEe0U%v6jccM-7UnBadz+1n(_Cvq( zjtREE%Ao(R0r%SPJd6An2dRIvh5j|7pROwp_g?+=cPjLzDbin$fB2meum1Q<#$>-w z@jr}6f8SGMjBWMnWefdyq7TylMW8p?f4xEf-+^GS{+Lsm^iPrep!uWc)Ox@A4deg1 zL4E-&+$Q;7CiydUrf?7Hx~@+Gy{Z3uNPdi3WBmO++lKu({{q;mo%cvRwul+9vdQ<;b8v2j#Uwixis73x(l3%4HiyN=}4Ho%3NWLCF z@%>w`{6AXckD4pw1;w8?EbVL0A{_P~6{tUa)!Yltp3;p+r z{#ZpRZg8&Y*Jx14H2)qWdg*_X#w-5>pf`S`hU|R|3;F3dVu_|S>*Q{lAX^qYx3$p7|P^xtF9f0RN0vyV29|0{!(e+JN-#*gI)Pto(IlMM3bS>*30 z`LqpDR`mK`l|}w&lCQ^~(FXZnu*jcQB}97Tr&s<@EcBNV{aH$LaRVy2u8kJ`V+Q+u z!l3_di~J6Y{$BZ?I>tQyHxvC$E^Yn$*HeMsH2w=n{{=*k@&7b~{-3qTkKn;DT;BZE ztADLUexG6d^9}M}w#c7G@?Y=>^p5|F7Ww;0{%)ej{udbJpFF~B|D$U}|AXfL@j!2~ zfB!I{sXqV48ss-xT(n$3lxY8P z2KmEAn(cot$@f0L@XC){=r<11epds%Y5W$D{`&ZxW6=NG7Wpp>QvSbLaO-_I=a*BZv}e1rUa2+#og&W|f<#lQ!R-$D!hbwuxt|0qkp?y=A}50d^b z7W(T4Nk2Z<-2c@?KSNg*?!Eqd7SNmgZ$H_;kmzy#OfuL%Ws(0J$$u_D{$h*#d=v=R z14NG>rx@hFX_0^DJV6+ge~r&G+iwHWd)IHD{ea$Nza6B%K7TJT=-*+H|C>R|Z?(wZ zZID0BApbut@*`IW`vv*`@yD6%cRbP0pz)K1*M1{`-ekW6q<Sx2`d@94UrX|X z{BNE`{y6-xA-Ht^n{JT*x<&qJR|>_0;?HDg0Bn8ntB~k}{I3Y;P4??2{dNBV{Ukpqf4jsYf3!jVY=ivy7Wr?J{9@H}apUd(l@|Gh2KjRg^1o)0f7(?--WeYG zz`}KX)gnJ;kY8z#{}YS+nIyl&B~AE>4sEo^UqJHp_;a~I{)ACx|64)wgZ2;S0lmrp z){=aE|4?I)-(it|+0~+#LH%#F$WM(Fo}%}Eo!LnAA5sqv|z)3KlQT)`HL;`SCRYzqL+nN z{v8(j?-Bi6Nk}EyTEA|y=)acqk5OZ^-+Y7qZ&>8NNAiQ_?|)n5?=sl$I)nWDlg$2e z>U^PiLhmfxd+qlLpf~x?ev+^I?*fDTRTlXxNIo2|xGt~!ofi6Ah#rF>4B|A6RAUDEva`xelf?3a%}_6L{lKS_iAM#BWbK6&5YdYj}YI2Y$1ul-H{ zdXxM{lCO{7B7^+J7WozQ;$YDDJz$}~g6M> zWWT!%d1K7||HlGB7DV4_p+6xZ=!5+4c?*33(Fe_+9YAlgU*qwjr+WNcVX)sh zpEUQsf#e7I-=)#Jzq8Q4Mf5@b_Zy4;Y?QE{?teEK z^iQ8=w%`7`!TC?0h5qPzK@Zd0bqTE;=n0@V*?$-5ug9NN2K|3wkw2E?2d$skpECD< zJkb|8s`5Lp{{OV-zu%z$mkj!sSmalc{Gj>QZlS-9=u15Mg9@&z1?Y#k5b^>xp})96wDHC-Fa5g~`ieo)&;7Jn|Er1q zY)4go=apX$^d|o)HQ4VSgZ=s}@>h}kpz(XcBL6Cb{PhO;Z&~EuL-K>hZ`N3|{dN!1 z{$I1u|9Oz~Z&~OM5`ED4y$QwICpZ?IqK8Rq_F)eZZjqZ!GfbN&cBGY5wz*e_H6jO!Ps|Zw^@W-(;}=g9iPlfr4lg z@A=C{k`Lj*b$RD+vxWW@q95m?_V<4g(3|YvZ_xi?gZ^K)$p47s2aW&j7WsP&i(+#vseMSe5M5AwfvE%F;lzV3gU4f2;kfHIBWKS+Mi{_p!1`XQea z!#2}3dj9xvFVLIDuk;i#e!BghGU)#&i~LJTzBhlszUtQ=i~JPH*ZpUULH_Bmz?$s0 zkmLvDZ`WApQ$!E17q~93|F5yo-%RvD=T|?r(0`NY&vQu^ebu2yfZjBIs}1(sX0YFf z7Wq3!evti&V1sC~|0_g)w5}}Nd+m3lg?=~D7X;8R2YOTg*Bko(oT2|OTjXai7J`HH zKM4YqssAI0K1l!LfZnA4CWHRZ8}v_DVGxSkJW|2 zy?6YN1A0^c`wjhn$<%*~{3Rs6#3SF^|M?dAdq}<>|9)YRzt1B7;X&H(it%Rq^;zh> z_UpFL|J*|F?f-ig`ZtL_X#D;H^rrC}eX7t@kKelt_NzMI-2dUtV&H2kEL_+77WpxQ{DTJh=T0_{|JalebDT?> zfBmho&`%=zV?Fd<{a0D&XA*sF0R0z%-sFD^4E@LC!R!Bj0D9Ch;*oO~$(QYAwfFOG zi~MB<`S_D2l3x1dU#b6vQUI0fN&eX$T-r~T{~&r#Gxi+OdvQr8@!Tn5{KagMC}aIZ zUjpyf=$F)AVn+kL$^L7p{|}rfTH^e}98=QE{-b|+ZI2YgZxwX;z+b<-`r~J>?$~}$ zRJ6>yOi<(35q=JkSN>5@ZIXZBD}w&`8bL4r6{!4VFR|Sa_ScV1Eh21-2?jl$vEW-R z_|JU!NI^MkzoP9HuFkZi4AQ>jH6l&H^cauWQ# zAG~l~!}hYBEN=uH+pougfeU|g9j`m!e{A2*KQVR=mEVUF+pio!0Cjj1e8l$OBKXr( zz5pd}kA{Lv&bv3@9&veIChhhC;c^|4_z<|k_Huei9KYj^IJ}m{FNvQ;IJ|D;!tq0d z|FWXM^?xJmMg60?kFb7qFK;g7{2f1$aLHt96?eT+vMA%*nK48KBWWoPp!T)N(-?iX>v*76M z{wu-`_(4D-?C%!*Lks>-3vLXPz&}fOV?`Tb_)9weE5dMA`mYGfvEV~3_;3q;v<1gs zR`FjEcB}=@wcy8D@DnUJ{-THfiZF~q{wu=p7cl%+gq>=^@fRojSA>1if}du=^DQ|3 zB7*;lu(1~WObb5Ff}d@{@tgGiE5d&b)`XvLX5P+JsNF zw7<4q3CC}g`L77O#)8kc;MZC31r~gv1+TN<^%gv7!SS0q{wuM$5!PzK+bsC!EqJ>H$8S*huLxUW!SNdl{wui#e(CT+x{!UdMx;tEjYfx?7t%HHVeMif`8S5-(kV=%~$^wVfaR> z|B5htQ`CP&*f%Zs-4^^?7W^IyzTSf0Yr(&3!SA!+_y(Z=im>ln@CPjT4=nhD7W{`6 z{9y}@Z+iK!2!8|1gm1L8$2Xq*SA_l8g5w)T{wu;Bx8R#C_)jf3z5(OE;5@;CKV!kS zTJWD)@NE`+hXsGuf{h7W`Kh9G^J*uL%2% z1%K6ozh=RATktn5_?s5|EepQKg1>FS2Q2uXEcl--I6kTIUlINU#e~0SY5%?j$0q^) zE5iO^!4F#Sk1Y7d795VGJQuE{cutiE&oS}3NE8es5}qT;zhgv`d-z3w-Ub<#^JE|A6C*eE9D0;5?AedT%A1D|#XR8RDS@=abl12mE~) z0uU!HICoNCU4(JxGT_`P3^*S&1I~?Sz`2nOxO`~hu8J@U{%#ohb*u*wA0sT+g8Snt zHjFTTTow577Ct9f@KF|AU*()8a4zb6(C#A4AGfg@&P%mc&TT|JC2}ylgL70jK%XM& zDUrK6qMj0Yaru3;t;fKGuStVZqO|;GePJ<1F}D z7W`}revSn{*MgsC!TswgHjFU;dMa@LdMfZDEPPjlQIh7ViLi+tM0|{}VhcXWg2T%K zh6~P<4Jh`@zrJI`hOPRS`ozAaI!l69XzD>|!^d@JlRssRf^I z!Tos%HjJ>DmiGSqM6{1u+Rw7!ms;?c1uwVYms#-H7QDiO&#~bC{0bYw`MITil?A`t zf>&Gc8Vg=)!RJ}f`7w;|CrUm!!i?Lxuy|v~hi?Dm#0DX$EZ(H#77W_LF{9X(GT?>An z1;5{df6sz{--172!T;TY|Gef^V|m{&N^?2+z4J?VqsVn=Sa07W}6c{3#3G=fl5n4E!Ay?LFAzsYMsZcc}I< z1N){0{}IQZQ|)EOzukiWmg75BdzpcKV8KrqfqFi#+RKb*BH(!nb#7w3{p$)imF^N8 z|GmOz(%tnIK0Um>U+%wiykGGdMR(5temp$C=%de1Q~7JakAvq3`Scmzy~gV!YJW3* zeo4UW*pcRbod`Jc_qIQS@Y-y_;ArAA$%01#FVNnD9Z&6(7QCDITu1!dsC0X{TBROFrcaZ zWDDM5!EdnOk6Q4jEcmk)e8@>=Jx{dYRTlhe3;sO|{*VQK6L7TujB|yl>1&AWBf_s6 zFK~I{aN^0L{WijzX@t%qe8Twxpr2!4vj8t(C#Z2BL+#_#zM@C~TM56Ow||{JG4+Jt z4vstTX-mKQ5y$=O^-hkTs^rQz@G-}o_q5L2x^Rs}Rt@uFL;n!l0k5hO(;V*F9A1D9J@pDvrspqG`F$&nbMD2`w zisR?`+OM^=|8I`}P4SU-KK_%)zew?s`p@O~`3jf%-^1|_6dyV6Z*%;B5C7C@$p7yO zzl`oWIPSb>4(jpi5lj1_pF%!Uls+9Y(FC6#Bhulx2o|UTo8PxtW9CyC=A^UX= z$1hjyrGGxl@fwB8IPfvY{c&deSd=?YwU>MzSaAFu$O3kq;sYP~Rd}YE&&7b7;^Y#J`{UtejxSLB z6U6`2&mfr{K`|8H}=-iKE}B2>VV3NIzOKjyeU?(O5a^ZtK= z+E0ZERiM59FZE1u+z<~r{y8OA>iGu87yIyuXCwb+g-bnqIqrNPNBZp+j!#tWB|hRD z+`34g}+)2>%Mlo$m|4vdFJz zIPQlJ_5{vwWFtZ>=iJ2>uquSfQ)--3@EkNj6EKC)kx9KTWFvR@lGev`sw zzb=8iszCdGfz)#)$Nll`VUDj-d}RE5g5$R+T>91TIPQm4kK!Zk zGn?aIR=A8OFLB%-_b!3_uYmdEUMI(IReWaBI6lI0f84uZ0`j>{wU>Hc1Gp(JE$8i> z?>m5-@#`xb|El71G2u^g{0@c7comt5a@Q#w)Z^D&jyvCXknQ_8?vG2S!9r7@eGfv8 zS2@R>??Fr_{u?>&k7M}zCI#$nrH>q!%O@f3d_O|s-{JT@sy$3|ehr_D?fr3S9>>?K z_EOJIj^C^B>BQ$njyEY>`rFVc$p5ec>&#U&5&&gAfkMsSe3#ngK7QBb!&i6Zxr}ocq`~k%u!V$lYzX19FK;f`# z@#}1kKd5jB{d_gYA67UlEBtzZ>v2J_8)@Qn<9kxtAcHpDJAXc@@X~arjz} z`{VFUfSc^Unzwhp&m#T#8IJqoZFwo`yR*g-bpAIR31{rJb{9ApdVDT zJ_8*0&zIz-$j3h~dN}U)=dB!nRq>bOI5~!V{QfhKWakEszoBs1-^gXy-ajs@IsT?h#KPz1F88a8#`}NMl;iKK_Hk@K9&Z|PX2UL5h&utw4hY#P$@q-GN z`P&B^_v?Au<;dTUM=f|W$Nl=>Yr%I}@MEh{?ng?`(WqFQ8e+=WV$T5q^T}BH_?(TNmk6MiI+vM5Owq+K6m<@XbnOW zilBLPSt`-m(bU#Dqb<>1k7PxK$>>#8@fnrVtIIg$B=ymuEt=SoPNX|KCV=#&)Etq@&!j|s-MrSOv~2b{-mDnVcqhWLC3b3JqPe-PE|G3)k0;s}K|=s1H!W&y zYfp*~MTParhGcsjS}i7|DBZq1o^I2j!bE*rDy<7|MNf-lp#;a>;VF0EBpDU)gL^*s&C7RmHXSXy(qfxDGM>1XB;%eHW*H2!O ztOLg>Zv-BV(Wq3SChe)vI0j00n3Tk;7sk`=$s|`nDOi&(DvZ}8n?W=rmnH;ZJSfuNIINY`V7%gP%1K4qDyu3cynr=!jN4x7I0A}^6JTZgH zLChQt#mLsACpZ@2!7JXBPPXH;2UQlr(3Mw%VW&7&b84#>E{R4fYvYx*h3Ncqq1}Y| z6@2953lkklIs6WaCU-P&aJ{u-BXhk&e>fwhq@a^)7H(~;Pg>nx6BuOYjQm}5MUI2n z#(V^7isC*~XBsvTUOn43YGR}^Nv(;C2`^+%^vgC6jDzAZYX)f4B8O%|J-C3fhdy_u zC|D{MwRXnqmMtrq*qU4#R}0v`W{5Sf5ut?U<)Nr!@Q5m~iLzE4{gO{A@C808vD%rr z+-)IrOo@A^q!{P`X24X?f!h?xxon*C&^e=I;Z*@nS%psNQ(AY(06h(&rL)#d^>y7e zqjaakb;-mL)(Nf?u3f={sd;yBERpQ^+UhsOpu{O2V9S;^NHA2uuHyREh-iH1vq1_7 z!vP#vl9|RBmXY%6+0ZCjmVy;S47s=ep0Oz}hn_%20z`_cb!khL$d9~v(*(+!ym*lz zpOS6$9E;i+b1Z6atRp&W{>5qIi7XtOras8eWghF5QN2xf+1^_3;a@a$UaGk*QSVli zJBiPXQ&XKCjSxob7Dp=^jU%A7sGiN66iornt&r6~|K}uH6N{4Vlgm5Mn!>YWKP@{L z7LO-7I+E?_ctfJ8SvS;#q6$#EI=SeIM001dV^(`x%dDp6WVEJ3XjU{4(jwU3G{9aa znP@4mgP|;{YfQ95?wf$rzq}6S92sMFO~<4<*bub~op8{DiHqB?6IHX3@x-|9BV2)| zDT|Wn=B8HIkJU9Z;9b{}VjUfIiPi?Jhgd#U$Y^Q^4h1UUi(aS^{Y zel4N-;eHYrwjjq!Six)Ku!TU08rSNKY#|G>saY-9I{OkiL#NDw=y}D=%4n5$*IiYl zEd?ztV*Ukhh~@0Fjb~8(o9*ov5V+V2;7N5v-DCyZnljQ1`oQcPA9ZJs<5uzb_!>OQs zA%T2UtS08AASlv9u9?g#Mwgf*N&gotQ-N&KZ_cF+6saVDikaSy&De2KrkIv5_@2x3%#D z#;{t+xN~SJz0;HZ zHZ6Y0cjl-t78pengF{?5p6UG}?-SXxN>a&M)tqO(DWeYJ$nN=ep0FWda&}Zs2(9zeEw0mmUuHBco#pxPX@KxKd&L zfB@!A@QEQZgTrjtRAf5mvE)ET7YfS8jUE$3t!k@`O@W@cs>pPf37G`pSAZCZ8 zL8c)N5}0vBTfAEca1uja36{$c5+`aQQ4gd%6SeJ{jN6gSnL3=VPYCmDB~um-UIz() zrL!W`$^-vQY(S-=Fe+)$B52%-Cc{(|+Z}w={P|8;{_s3dPHCI+dj20moF}snL8+2) z&`6Pi=5?@DhDUV#2;0Hcu{;=Aa~9bvJiN@{YM#|su|0%i2!nmq=_%fr?Te2@Ef$tt zz^ytE2gh31-s^C>qL1C-h5w+jbPch4D2w3zf<%3NJ3I<+YXIws>BFCcLk?42Blcgw zU@%WSWthfP%88hRB2__oFs+@%$J{!o9@e2baPCVvAS{}VbQEG{r*>p|K1}Jbdp=~$ zK|Lon5fQ)SG{Lsocrekl{{Ewk8%f!?T@+ z@~b-9=fVa9-z-sCc)T&$49^qb;H4Y8F78J*Eagpx>CF|qj z`B(!yK20vGOTv3d3D~khJQTYcFdXdNCdMHQR>Q6tj_T`{CE{=-5Qq1k>frRBf9Bb! zMEFkAwo97A-#dbBAvnMi+U^jO_9VO%)V4Ilwui<+ZR)@&4kxM_vspc^4Jyd{GF5tg zMn;w}j|_F;S}r??&5#O;hhvZun0oC^iyG5>Z=g6iPuj&;sft5bl&64*=48XaP(slp z9Z3Ufv@q!HUKTQV^rZjO-noZIRb2~wRPe!D4K)=X0kL{5 zl_Ug=_(C8c4-p}@Xe~*AAV^XWqJl3_@YPbq8o^djw20OxR#fUURTO(KR-{Iw z74N0JRPYljO4mAP?U~=4IeRh*^uK$)FOTz^HEXZE_S)|~XE0Hh{A7y_cStA}T=uA8GH;Q&W4Jk#%`>IR_>|dJxY^jN zxT2!AYD#tHbFTlN&CU6o27hSXjau$nsU^16LHp~@&NH#c&z;F;va#!6Fz zRbOIz9U3j2b?vj_7XwmduGKNN%$xL2Q$?IHyNVr2XPa=z;U#XZha*hi*hrc}-3^LO zq(z7NWgjOeWf+bJZ%Edg)H+DEOmed4m0L&+<=d^f0XJCc^2ZbjS|VUW?THs$XkoiNL`nH&TQw75?I#KvXn=t}Xa$)3|@+WLvk>DA+^ zYO3Uf>NsC?70RH(jrC%^A`NM5(qYE3&S&MFS|E`=J(o6u{bbg?z*F{3bKz#XF&~G? zsgA{XD2vKun6zMV)L$Lxvz*2j+3KfM#9)-^sZdPI>Xw_N#MQqv@z`ociRK%hbZC}( z*X$HBD`IjMA6FyPW3D<%o8F`w;_H?3yMJgWA67~YedH#G3AYVJC)9)=0?MX4ZAz#! zXB{VKwvtV!chV8rlndse@iUM3ExGK|LC(8#&4AkrO3Q*qbo}nK_voS)r!U*7iDp1=FyFNTXUyx61g$-H9uaLao|{T6eR)YHIDsddW4sKOQO7dV)7M*Iro1g; zTXASxvxYmm5pzYbXPu>U#TlFl)$Rm+uP)r$IWup zDmMs=uX3@a!GpFk+zmGdT5{C3*d4V!C38aDWG12mH)(#P$m9BoTJ{u42ex1|5Gjjj zB}6BlWvyLD#_qiIJ~Sq&DobFn?n}w087aog%h6S&y@?d2CIy4OZgh#9^^(BRlV>eD zqb;A82+wGrni)7uHn&V>L{jb}4}UwC+gJfknG`N1r}dsnOyE049wlQ_vm_Q;Z|c7es#1xnMUOTRI_V6cH8-IBc~hk&Nd@^p#XUm{JCuxtYVTMj({62?BFp%x##8h}4^#DO{$VOc+JcRgNUPrRvfUeRr$EyK5Qr@p)B=MmiNN5X2Ir%4q3Adtz$zdeYBlr#2fo==373Y7k1~lO^9OkWfXcc zsACG;Tig8eq-bqxmbcQ&d@mfAu82PDEuC!m0aj^wTI$Di^%*Wri_aLhdh3zjt&w^p zMXOtZy6YD{uSv@~ebY}jt0ise5zkGD$*0qbdbz#A@F;@}J0z+_P)=Y5`+$L(s^THq zc?Bmf%VfJx>VUXSYMq-ArVZj{UsFDQ;D)^JF(J)qbjS(?;a8XbS&$VrjxWf2So^thRRQc*uS9Xee~QFi-WDN31zMK&VE;)=|@ zTSgWrvgVdpaYl)06lD}_@etSRxq^)qE6PDE&AYN|5?5N8%A@ZZ8dJtiy-Tc%c~`J9 zoKbB`f+7mGUPUcScI2et;|gULD_M-m6)E}5L9!%*a?tXYabch7vIIW0RvsugUOtbI zeBMt*UDYLJ!4i~gyw~cXV;SMfTv`q^%kWQXq&%EO?FwsKsXV45h?^39(qcGDtC%oj zYK1&_a6(P2P`KO{9DE}A&|$%2bVst zn7rD!lV5sB2x^QwdB+z-t!J>$~d*JBPQTg^Ecs?TUo-O)~aeZ{C+PTBzJDEbq zcN=$4OjoW?Dc-#&yxxZV2Jl_rAA`5EXO*fSJ~A2kH*t)I&oHik^eMtF-ABRoX}gZU z;o<-1;cX7k)DyvjSgEJ4hfe_4r{TJE>%pn#WpK)W0#5n;ERNJ%@}oSwFF5s|3%(V0 zE(6!67d!i(^YB-}{|xz0jJvpPusGQk;qFPlUqtvwE02FbzdkM4+0##hQZ5zKrx!bZ z9{AtECxh!#jh*~L@a^DF8h7?rm_5%yUY{cD^lXgC*O>ff$bSL(BMuDA5A4^c3p+hU z;9r85fveA){G}d#IXKJZDsZiXPS5cNrR-6YTiJt%Zv#I_^5o=~c=-F^2Sff75C7c5 z=N_E0=Md;Av3612OI{1!2J$z0_!988kbly{*L(P8aN4sST-!9~w>{wP!H?BIlS@#d z19%^B>L~-Ko@#LFc?O*R*$7TQYzN;D_O#Q6SuVA+BX}2Z+Ia#v?HmkFJ0Aq6o%%h) zdTF|}^J8$@xf`5zwzYmz_0Y~E!D(k-aN2nTIPF{pPCFaGX{UZ~uwGGrZULvAJHTmY zp0%&4hjyL_u1^_vaaiKv13Y{bxIRzZ>ABI`2~D>(_&wnCf9H;x+c3X}LjHR2!@ytj z@bw=4m4_c;0~@uI`g?eIfAGU$&-vha;FG{RgWqv@klmns>9^kU{i1rQJ@nf!aQf|a zaQdz2TY;KD5A!v{!*B5LM?HLvhkxkdpM%qH`yG+8lYYwwr{8Y22mh;o^y&UC-WGcJ zL*R__RUW?9!yCbw?hX&%1I~W-{4S~d9*B6T1mA>w%>X|F@`H{^>B$Gb09?PT)%oYg z;75XA3*H5MHMsWs?X2E58rN<>`E+@YURxlq-!<#f-3fj)_}39VSD2pG$AzLo^Khn6fXSV6-26^h40)uU=?*gP^gL&JMnIl= zF7)uR&~vQmNXRu2@&&?OInD;}3Vxe$wWk~O+zI*PAb&UHneI}^GuLxdGso9jz?;hZU%U36x#~uyNe04LfdYG>hAkTdDggo=L81ic87)$qlaHhK)dYJB` zkY~D2L!RkwhP;caH{WNg)@8#g^-^YWqU0MjP z`EvdH3gfO^3N63SMR>9CH4$E7{B7u`AKv%yO%Xl)P0yzu`7gma9@rhxGg}=iSF01l zztK1!1((2AMtAL7w@#6`cLxZ4o_gJg^Y*)N?;L^(>F*S#0@w0`kag zf*!`<>yT$0{so-<>0hCT@&7sG*`Iz1d8WGu@=UkGzop8HaXSE9&RV$TLo=!5N=*(8Ktg z1$oBjb&zMeH$k51-UZHbd=NaX98Zof_krM)*YAVI#)RGj|+ockuTz`4Ir@8SBr(|W1?ljN7HN39D3oWXl~_=O%m*TWz2 z@C_dRjfWQ$rR?N>N0Eo04$ktb0;fOcg43V(dibZ{wC5il-nuwtKkYf$xYl>8qJdy9 z$R8?WF;`xtkUz}EX!?dTz^SJ{_~DQr4E=e~zomVUd_qDn(HZjHLmb43wpUwCPQFe! zxHPVmZ!_+`cQ(pxIF{5CC;tKB-@1iBo_uteY{2zfOr3wmg456W;FP!SE<=y|o=&y@ zE9fWJZ;5p2o&^1>%yFi>Ke)L+NSE?QK~Jk3OrO`ul*>&QcHW>)~gBGp^1Ar=L#)XS)47yuXK+fivAf;7oS_ILmi1 zxOEpnxeNvG3%{KMZp%f1{BZF8kRJxl{GRLKBfxFBH_(3`IO9S0eqEe19?l16x}!XN zw1=02)1C{!Z8LP8Zxg{s!5*et1%3(SX+PV6+ab?(>2dH$(DN!d zCF4`lmqt4#?Afp2MO2FGHU8 zyKj=X%KhE81tKTZQ;xd&Ty-688Lm`y8H!+*j>0BSL7vO9US&qXYuWOmEy&VHi`AajJMU`jJMx`Gu~bYXS}@uo=dz@e=hMxe=^>fF8#@IApJ={Gu}83 zWW23GzH*5-`rj9CY;S)L{fxu49?tO+JC-7q-zY(1FzX#qO^6!IF{sVBz{~4U}e*x!u8rwJ8$@Yiq zLYtt6`WwN0`ng{H5#+i4%=VN1XMa5u{`oKH83R5Ud^|YY&ne(sf8aQc{r+6Y`_>0G zBVGF8zrl0y=O>W&>7hSAg*^Sq_JRIf26_5(3;4gnpB%sW{Knh}DAiw0pzz>8T#smF8&U{@6JqN&_w7)&{lXn1Tf7%gz0QBpbN;e)b z9PFz~vWau80u@01ASWb$`+*+}UI~5(_#E&y;7h?ZU3WFuKg#syRJ(7qzm8A0`@nGd z-|;2Jzbj)Ny)@1D?SH-RXaB2wz5=_3K;HEc`qCuGyES3uw}7jz28D7x9N{{GpZ7M8c)xc)Qji|B=Z% zJ@zq^gvP2~`p4A~yGbf@QcAK!G8ok2Yf8}Qt%4!2JlMoM(`@|M7!`t?H>nT06rePANU0DO7Lp% zIp7n)mx5mc-T*!cyb*jdc%prHqxN44eu!}`HXRqWvvCzazdQx<=Ri*lcnx?h_1Ayi4wfp_W{-l&~dffs^b4L%b58t`f0*MctqzYcr__-ycX;B&yYfnN{4%eaf5 zLW`gLPN9(I>jub|g3kpX13nLYCisoucZ1&qz6$(i@b|!P0sqLjv;R!9KXGU%r1swm z`2z5tfcFFcDR?FLeDFEoKLcM1ej9iL`0e10;0wS%Gw$*=-161xuuw?zbqD0TgZ~_S zAo!i&6Ts`i=Yih^z6^XJ_-gP);G4nk25)tEc%%0J0=zr8n?vZ!1Htcs`~>jD;Pb$j zfG-2T7koANec+qHmx8y-3vbl^`@y?|KL9=u{8!);z?Xr~1Ah>F8TfMW)!+|-zh&IT z&q#}(t&o2h^6ff@H=3_sgZBV`1bjI7qu@2*kAcqze;oWSOSP>%m_K zUkUyO_y+Jb;5)$I1kd|+c%%0J9=rtn-@(hl{{ws`_*(G0!QTRZ5&RF}AA-LPo;WhR zQ9IXx7l6M5-Vb~|cqRBB!RLT)0AC9JE_eg@pTHZzH-aa+gg0ux{&Xr1?+YT_t<(M! DuMANa literal 0 HcmV?d00001 diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/build.make b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/build.make new file mode 100644 index 0000000000..55f2ff4765 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/build.make @@ -0,0 +1,106 @@ +# CMAKE generated file: DO NOT EDIT! +# Generated by "Unix Makefiles" Generator, CMake Version 2.8 + +#============================================================================= +# Special targets provided by cmake. + +# Disable implicit rules so canonical targets will work. +.SUFFIXES: + +# Remove some rules from gmake that .SUFFIXES does not remove. +SUFFIXES = + +.SUFFIXES: .hpux_make_needs_suffix_list + +# Suppress display of executed commands. +$(VERBOSE).SILENT: + +# A target that is always out of date. +cmake_force: +.PHONY : cmake_force + +#============================================================================= +# Set environment variables for the build. + +# The shell in which to execute make rules. +SHELL = /bin/sh + +# The CMake executable. +CMAKE_COMMAND = /usr/bin/cmake + +# The command to remove a file. +RM = /usr/bin/cmake -E remove -f + +# Escaping for special characters. +EQUALS = = + +# The program to use to edit the cache. +CMAKE_EDIT_COMMAND = /usr/bin/ccmake + +# The top-level source directory on which CMake was run. +CMAKE_SOURCE_DIR = /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C + +# The top-level build directory on which CMake was run. +CMAKE_BINARY_DIR = /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build + +# Include any dependencies generated for this target. +include CMakeFiles/Si5351C.dir/depend.make + +# Include the progress variables for this target. +include CMakeFiles/Si5351C.dir/progress.make + +# Include the compile flags for this target's objects. +include CMakeFiles/Si5351C.dir/flags.make + +CMakeFiles/Si5351C.dir/Si5351C.o: CMakeFiles/Si5351C.dir/flags.make +CMakeFiles/Si5351C.dir/Si5351C.o: ../Si5351C.cpp + $(CMAKE_COMMAND) -E cmake_progress_report /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles $(CMAKE_PROGRESS_1) + @$(CMAKE_COMMAND) -E cmake_echo_color --switch=$(COLOR) --green "Building CXX object CMakeFiles/Si5351C.dir/Si5351C.o" + /usr/bin/c++ $(CXX_DEFINES) $(CXX_FLAGS) -o CMakeFiles/Si5351C.dir/Si5351C.o -c /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/Si5351C.cpp + +CMakeFiles/Si5351C.dir/Si5351C.i: cmake_force + @$(CMAKE_COMMAND) -E cmake_echo_color --switch=$(COLOR) --green "Preprocessing CXX source to CMakeFiles/Si5351C.dir/Si5351C.i" + /usr/bin/c++ $(CXX_DEFINES) $(CXX_FLAGS) -E /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/Si5351C.cpp > CMakeFiles/Si5351C.dir/Si5351C.i + +CMakeFiles/Si5351C.dir/Si5351C.s: cmake_force + @$(CMAKE_COMMAND) -E cmake_echo_color --switch=$(COLOR) --green "Compiling CXX source to assembly CMakeFiles/Si5351C.dir/Si5351C.s" + /usr/bin/c++ $(CXX_DEFINES) $(CXX_FLAGS) -S /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/Si5351C.cpp -o CMakeFiles/Si5351C.dir/Si5351C.s + +CMakeFiles/Si5351C.dir/Si5351C.o.requires: +.PHONY : CMakeFiles/Si5351C.dir/Si5351C.o.requires + +CMakeFiles/Si5351C.dir/Si5351C.o.provides: CMakeFiles/Si5351C.dir/Si5351C.o.requires + $(MAKE) -f CMakeFiles/Si5351C.dir/build.make CMakeFiles/Si5351C.dir/Si5351C.o.provides.build +.PHONY : CMakeFiles/Si5351C.dir/Si5351C.o.provides + +CMakeFiles/Si5351C.dir/Si5351C.o.provides.build: CMakeFiles/Si5351C.dir/Si5351C.o + +# Object files for target Si5351C +Si5351C_OBJECTS = \ +"CMakeFiles/Si5351C.dir/Si5351C.o" + +# External object files for target Si5351C +Si5351C_EXTERNAL_OBJECTS = + +libSi5351C.a: CMakeFiles/Si5351C.dir/Si5351C.o +libSi5351C.a: CMakeFiles/Si5351C.dir/build.make +libSi5351C.a: CMakeFiles/Si5351C.dir/link.txt + @$(CMAKE_COMMAND) -E cmake_echo_color --switch=$(COLOR) --red --bold "Linking CXX static library libSi5351C.a" + $(CMAKE_COMMAND) -P CMakeFiles/Si5351C.dir/cmake_clean_target.cmake + $(CMAKE_COMMAND) -E cmake_link_script CMakeFiles/Si5351C.dir/link.txt --verbose=$(VERBOSE) + +# Rule to build all files generated by this target. +CMakeFiles/Si5351C.dir/build: libSi5351C.a +.PHONY : CMakeFiles/Si5351C.dir/build + +CMakeFiles/Si5351C.dir/requires: CMakeFiles/Si5351C.dir/Si5351C.o.requires +.PHONY : CMakeFiles/Si5351C.dir/requires + +CMakeFiles/Si5351C.dir/clean: + $(CMAKE_COMMAND) -P CMakeFiles/Si5351C.dir/cmake_clean.cmake +.PHONY : CMakeFiles/Si5351C.dir/clean + +CMakeFiles/Si5351C.dir/depend: + cd /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build && $(CMAKE_COMMAND) -E cmake_depends "Unix Makefiles" /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/DependInfo.cmake --color=$(COLOR) +.PHONY : CMakeFiles/Si5351C.dir/depend + diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/cmake_clean.cmake b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/cmake_clean.cmake new file mode 100644 index 0000000000..e300fd2668 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/cmake_clean.cmake @@ -0,0 +1,10 @@ +FILE(REMOVE_RECURSE + "CMakeFiles/Si5351C.dir/Si5351C.o" + "libSi5351C.pdb" + "libSi5351C.a" +) + +# Per-language clean rules from dependency scanning. +FOREACH(lang CXX) + INCLUDE(CMakeFiles/Si5351C.dir/cmake_clean_${lang}.cmake OPTIONAL) +ENDFOREACH(lang) diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/cmake_clean_target.cmake b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/cmake_clean_target.cmake new file mode 100644 index 0000000000..bb2fb4b00e --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/cmake_clean_target.cmake @@ -0,0 +1,3 @@ +FILE(REMOVE_RECURSE + "libSi5351C.a" +) diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/depend.internal b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/depend.internal new file mode 100644 index 0000000000..2b377e7bc4 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/depend.internal @@ -0,0 +1,6 @@ +# CMAKE generated file: DO NOT EDIT! +# Generated by "Unix Makefiles" Generator, CMake Version 2.8 + +CMakeFiles/Si5351C.dir/Si5351C.o + /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/Si5351C.cpp + /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/Si5351C.h diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/depend.make b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/depend.make new file mode 100644 index 0000000000..f55fdb2688 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/depend.make @@ -0,0 +1,6 @@ +# CMAKE generated file: DO NOT EDIT! +# Generated by "Unix Makefiles" Generator, CMake Version 2.8 + +CMakeFiles/Si5351C.dir/Si5351C.o: ../Si5351C.cpp +CMakeFiles/Si5351C.dir/Si5351C.o: ../Si5351C.h + diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/flags.make b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/flags.make new file mode 100644 index 0000000000..3515e5e131 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/flags.make @@ -0,0 +1,8 @@ +# CMAKE generated file: DO NOT EDIT! +# Generated by "Unix Makefiles" Generator, CMake Version 2.8 + +# compile CXX with /usr/bin/c++ +CXX_FLAGS = -std=c++11 -I/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/../lms7002m -I/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C + +CXX_DEFINES = + diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/link.txt b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/link.txt new file mode 100644 index 0000000000..000b6e0ee0 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/link.txt @@ -0,0 +1,2 @@ +/usr/bin/ar cr libSi5351C.a CMakeFiles/Si5351C.dir/Si5351C.o +/usr/bin/ranlib libSi5351C.a diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/progress.make b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/progress.make new file mode 100644 index 0000000000..781c7de277 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/progress.make @@ -0,0 +1,2 @@ +CMAKE_PROGRESS_1 = 1 + diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/TargetDirectories.txt b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/TargetDirectories.txt new file mode 100644 index 0000000000..8bed4f4e60 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/TargetDirectories.txt @@ -0,0 +1 @@ +/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/cmake.check_cache b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/cmake.check_cache new file mode 100644 index 0000000000..3dccd73172 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/cmake.check_cache @@ -0,0 +1 @@ +# This file is generated by cmake for dependency checking of the CMakeCache.txt file diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/progress.marks b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/progress.marks new file mode 100644 index 0000000000..d00491fd7e --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/progress.marks @@ -0,0 +1 @@ +1 diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/Makefile b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/Makefile new file mode 100644 index 0000000000..45a34a03b1 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/Makefile @@ -0,0 +1,157 @@ +# CMAKE generated file: DO NOT EDIT! +# Generated by "Unix Makefiles" Generator, CMake Version 2.8 + +# Default target executed when no arguments are given to make. +default_target: all +.PHONY : default_target + +#============================================================================= +# Special targets provided by cmake. + +# Disable implicit rules so canonical targets will work. +.SUFFIXES: + +# Remove some rules from gmake that .SUFFIXES does not remove. +SUFFIXES = + +.SUFFIXES: .hpux_make_needs_suffix_list + +# Suppress display of executed commands. +$(VERBOSE).SILENT: + +# A target that is always out of date. +cmake_force: +.PHONY : cmake_force + +#============================================================================= +# Set environment variables for the build. + +# The shell in which to execute make rules. +SHELL = /bin/sh + +# The CMake executable. +CMAKE_COMMAND = /usr/bin/cmake + +# The command to remove a file. +RM = /usr/bin/cmake -E remove -f + +# Escaping for special characters. +EQUALS = = + +# The program to use to edit the cache. +CMAKE_EDIT_COMMAND = /usr/bin/ccmake + +# The top-level source directory on which CMake was run. +CMAKE_SOURCE_DIR = /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C + +# The top-level build directory on which CMake was run. +CMAKE_BINARY_DIR = /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build + +#============================================================================= +# Targets provided globally by CMake. + +# Special rule for the target edit_cache +edit_cache: + @$(CMAKE_COMMAND) -E cmake_echo_color --switch=$(COLOR) --cyan "Running CMake cache editor..." + /usr/bin/ccmake -H$(CMAKE_SOURCE_DIR) -B$(CMAKE_BINARY_DIR) +.PHONY : edit_cache + +# Special rule for the target edit_cache +edit_cache/fast: edit_cache +.PHONY : edit_cache/fast + +# Special rule for the target rebuild_cache +rebuild_cache: + @$(CMAKE_COMMAND) -E cmake_echo_color --switch=$(COLOR) --cyan "Running CMake to regenerate build system..." + /usr/bin/cmake -H$(CMAKE_SOURCE_DIR) -B$(CMAKE_BINARY_DIR) +.PHONY : rebuild_cache + +# Special rule for the target rebuild_cache +rebuild_cache/fast: rebuild_cache +.PHONY : rebuild_cache/fast + +# The main all target +all: cmake_check_build_system + $(CMAKE_COMMAND) -E cmake_progress_start /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/progress.marks + $(MAKE) -f CMakeFiles/Makefile2 all + $(CMAKE_COMMAND) -E cmake_progress_start /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles 0 +.PHONY : all + +# The main clean target +clean: + $(MAKE) -f CMakeFiles/Makefile2 clean +.PHONY : clean + +# The main clean target +clean/fast: clean +.PHONY : clean/fast + +# Prepare targets for installation. +preinstall: all + $(MAKE) -f CMakeFiles/Makefile2 preinstall +.PHONY : preinstall + +# Prepare targets for installation. +preinstall/fast: + $(MAKE) -f CMakeFiles/Makefile2 preinstall +.PHONY : preinstall/fast + +# clear depends +depend: + $(CMAKE_COMMAND) -H$(CMAKE_SOURCE_DIR) -B$(CMAKE_BINARY_DIR) --check-build-system CMakeFiles/Makefile.cmake 1 +.PHONY : depend + +#============================================================================= +# Target rules for targets named Si5351C + +# Build rule for target. +Si5351C: cmake_check_build_system + $(MAKE) -f CMakeFiles/Makefile2 Si5351C +.PHONY : Si5351C + +# fast build rule for target. +Si5351C/fast: + $(MAKE) -f CMakeFiles/Si5351C.dir/build.make CMakeFiles/Si5351C.dir/build +.PHONY : Si5351C/fast + +# target to build an object file +Si5351C.o: + $(MAKE) -f CMakeFiles/Si5351C.dir/build.make CMakeFiles/Si5351C.dir/Si5351C.o +.PHONY : Si5351C.o + +# target to preprocess a source file +Si5351C.i: + $(MAKE) -f CMakeFiles/Si5351C.dir/build.make CMakeFiles/Si5351C.dir/Si5351C.i +.PHONY : Si5351C.i + +# target to generate assembly for a file +Si5351C.s: + $(MAKE) -f CMakeFiles/Si5351C.dir/build.make CMakeFiles/Si5351C.dir/Si5351C.s +.PHONY : Si5351C.s + +# Help Target +help: + @echo "The following are some of the valid targets for this Makefile:" + @echo "... all (the default if no target is provided)" + @echo "... clean" + @echo "... depend" + @echo "... Si5351C" + @echo "... edit_cache" + @echo "... rebuild_cache" + @echo "... Si5351C.o" + @echo "... Si5351C.i" + @echo "... Si5351C.s" +.PHONY : help + + + +#============================================================================= +# Special targets to cleanup operation of make. + +# Special rule to run CMake to check the build system integrity. +# No rule that depends on this can have commands that come from listfiles +# because they might be regenerated. +cmake_check_build_system: + $(CMAKE_COMMAND) -H$(CMAKE_SOURCE_DIR) -B$(CMAKE_BINARY_DIR) --check-build-system CMakeFiles/Makefile.cmake 0 +.PHONY : cmake_check_build_system + diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/cmake_install.cmake b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/cmake_install.cmake new file mode 100644 index 0000000000..d7797d84e9 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/cmake_install.cmake @@ -0,0 +1,44 @@ +# Install script for directory: /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C + +# Set the install prefix +IF(NOT DEFINED CMAKE_INSTALL_PREFIX) + SET(CMAKE_INSTALL_PREFIX "/usr/local") +ENDIF(NOT DEFINED CMAKE_INSTALL_PREFIX) +STRING(REGEX REPLACE "/$" "" CMAKE_INSTALL_PREFIX "${CMAKE_INSTALL_PREFIX}") + +# Set the install configuration name. +IF(NOT DEFINED CMAKE_INSTALL_CONFIG_NAME) + IF(BUILD_TYPE) + STRING(REGEX REPLACE "^[^A-Za-z0-9_]+" "" + CMAKE_INSTALL_CONFIG_NAME "${BUILD_TYPE}") + ELSE(BUILD_TYPE) + SET(CMAKE_INSTALL_CONFIG_NAME "") + ENDIF(BUILD_TYPE) + MESSAGE(STATUS "Install configuration: \"${CMAKE_INSTALL_CONFIG_NAME}\"") +ENDIF(NOT DEFINED CMAKE_INSTALL_CONFIG_NAME) + +# Set the component getting installed. +IF(NOT CMAKE_INSTALL_COMPONENT) + IF(COMPONENT) + MESSAGE(STATUS "Install component: \"${COMPONENT}\"") + SET(CMAKE_INSTALL_COMPONENT "${COMPONENT}") + ELSE(COMPONENT) + SET(CMAKE_INSTALL_COMPONENT) + ENDIF(COMPONENT) +ENDIF(NOT CMAKE_INSTALL_COMPONENT) + +# Install shared libraries without execute permission? +IF(NOT DEFINED CMAKE_INSTALL_SO_NO_EXE) + SET(CMAKE_INSTALL_SO_NO_EXE "1") +ENDIF(NOT DEFINED CMAKE_INSTALL_SO_NO_EXE) + +IF(CMAKE_INSTALL_COMPONENT) + SET(CMAKE_INSTALL_MANIFEST "install_manifest_${CMAKE_INSTALL_COMPONENT}.txt") +ELSE(CMAKE_INSTALL_COMPONENT) + SET(CMAKE_INSTALL_MANIFEST "install_manifest.txt") +ENDIF(CMAKE_INSTALL_COMPONENT) + +FILE(WRITE "/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/${CMAKE_INSTALL_MANIFEST}" "") +FOREACH(file ${CMAKE_INSTALL_MANIFEST_FILES}) + FILE(APPEND "/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/${CMAKE_INSTALL_MANIFEST}" "${file}\n") +ENDFOREACH(file) diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/libSi5351C.a b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/libSi5351C.a new file mode 100644 index 0000000000000000000000000000000000000000..bc5d760e0aedfec3c12ab319e446c9ce801c5bcc GIT binary patch literal 162342 zcmeFa3w%|@wLd<|;iaO9ii(!nNYUa869^C#H9QWU$SWqGR?$O94kRV7CMO71EjGlG zMl4ln?X9)eYU{1m%k`qAiZv(&^!mWodTHymXsrdIEmf{&nfaBC8c9a%f^o>oiMhjs90v%e~XGr z%8JJ*Wd7koV`g=2OH)&O z$(V~W&6&1_+RB>R#hI+8tnoWsx3#gQrp_;+?BS5YCbV|6 z*QXbNx|6f(u@SjSR85yf44>kP=7wxTO=H8gnPjDr&Q`_fk{KXKRc6tpHH{sa_GxV` zP1710Gs)_9#cNDcO>0F{Lv^;aG1J~&(UgS#g^SjjhPI07O%2IpQa8RjTb8a`kj}Pc zG8IjB5$MO_bakc?45XwzTTwkao%B}+KvJuyI@<@1)E!W^J(HEpJmH!ci9n595c zbG9M74BKJ12#KO9Rr%G~@e5npuBmCOt7u5ho|CSE{wNvOmT78Pl1aB^7G~Nq&9#|| z>f&^=G`p-dBkfLW1N1eeq@rO-GFdgf35Y?(R((ye>%$I!3Y)OT+12TaIq5mT*I#Q@ z&T30|F{@OybJDY+Qrl$4PittdyL8IzWM$AzRf1npehd6iQ&V3p$a5C%{*1~W*U;Ra zY0IKgk>zyGF2*j%ENW<09uo?U9;59wUE9*!o=rDoGvF-1i8UqbGOAeaQmw6~GPmSo zGR<|SNG^WO8IT@~rmrfaCgWg&?oUGh;~ALZc+)1+n(ESYask?wR!-!QE^SALLH;Ou zJO=dYl)-ixtyx`nbWzf9U)+LE*^xCXjgRqJcF9=nkuy^oTWS}#D>=10EvtqZ5AkGu z(}D%4O`S6ia=_#PZ?NI9RT*$l{z`BL&3d!1)Rs5YL0V2}>rVXQmfrvgtXk>6%7R01gr<1p54`nf7d3 z%d(2f`ugOOIqB+>bQR1IhF?SeS)uk6kj(G!^Ew8VHmsRA@6nI*YcB+H6IA1=b03 z$DGGBzN|C6j81&?h7s3qfNmu5IWrv8-V6=1hHc*muLm5RWh33B41}nnLCbJ zkeo8QqKcESY5|6~UL2acF0eX?q?pDk8&|8B+|__cC2>Tu#(7k~m5hU-s6y6sM{~pH zJ7D^o4jrLa37qhD3>Sl4AUcadX#y&%@3oM)^vhv6fyvZjsw=>?3$!$PW#~{B%$^wa zg392;tu9<;G75_=fiE0Bn5NiWad6(;>Y9?0bh@Ult__ywEeri~C4?AN)hfgVEji;b z55;NF_%PhWF&BL!H9pg;(vCho6d8GQgNNItqw>LX&xCy*3ejLrtEbhbyEa= zR>3D&_MJ0C3@qyV79t*OfT;T~81=dXL|^a=;bD-ZMUet=z(OdTs=w z_R=)^ezQAQmzEny4GYuFEt#dYnbvH&23Azy-_)W56bDPIF==pXRdY(Blr+AM)@0DV zOK7d3#1A&pX+)$~dzEo8Ue6gk#&*J?SdCT=+EYwOrx!JMq-&QhEg93CxkmQ}?B;;$ z^Hv?X78HG0dl)BoFbXMyq14u}s6H!0aZ?j?eI2f0+cT=KOvV9hr;Y~}jhTi2gB(i6 zN)Ig8{!;SX>k6weQSp(}UZRMsE>`O~S~nbsdDzPdmrY>4%MhYujNk83HOB7ds0#bk ztD&_8M6Z2}1+AIZ9k=CPkl10RRaMUQNMO>|!M}SoBv&FZg@u+Jkz^$mVKSHleD@q` z8}%NwFZzq>l+mRy)NudJw`fSWwzMBmbr5r#^@m=0xV3>h1!mxS?x}hT+!N4qkaJN9 zqt3C*AngVshFlxrF!-aEZ#l_?pVC;&M{8hY0}9;!3V=^iDf2qx5vf2PoE3ORl?UZplSZ zQp_xVXg6N&7R#Mgs6|JEl^71nFp`?WZE=T!eOx9Sx=??t4E41I_AS&$2@YnPJ=Q8J zuq?{e5%zjS@6M~8eF)iOs+r>MIEucw&ugmidZetWW@*~o>63R7mcp&is_9@Nu-a31 zTXMC%%q+iQeS~)lp^nk%bW_dZOn5nCZb!nZ2K=*H?&uq?Ft(FPxyF&TjD}kLtE1YM z)@86F3R8kjgR7}m#MPy^Mv}LmU>7n<``|jw&;avtt9_gqKHfr>S;6W%IcCN@fVkb7 zxKtRcS2>TzD30Zf_BXx|!*+2{fp69T*9O_%6BOv{k`@o2Ab?}=V4fX+G%mj}K$?XsD0AOV-6uV8;mk4`ZqkA0gkh~r>YzFpMQ!cK9@-^SsJHa$ zCzshksO_|ssBn~HcF?AApzEqb*8L!W*XKA2oP8dtpQtVlMx#~ESUJ~{3ZCe&?^UY+ zl#71A72@p`CllCq3*KCbt_*IB^reSDIfDyUd4Q|kB z&`PYF>rJ3Ubp~eSzKn2tmdm-?9DisAyIxFIPdH>lK1Y?NlMf&W;s=whGthc;7&8uH zJZ^MhoP#~g3J{5vu~}23rd{cu|3A)^>slk7l`f!gZtiB?sb~IAkL)~ zy8-$pjjsu4%4R3RzMslJ!iP?gYqqySG}FTLT=IG4>DkfXIuBNB(3xt60lsD7MIO7v zvsZXHYIDh9f;i}89m4VDL6Cs^_8GAkB)jef1d2vlVH7j}#ttkz^l9926UQOcSS_eDsF%s@g3_`47 z3SlKhCI_&2HCjI-IzGJcjBG?OKmvb(vN`;5lkL-u0uNx`4)jHEP+8NhZ{qgvT4MyN zAM`zh!kDUZ7=}HTp=W(Ug7A|OR>2HjHVQxY68QNk2oF3uIE^7I1|E#W3%mB zBSV(d_ZWfqTXG_Z*gUGYM^e4ol=V$_AU`*C!4nzPuoI~^I4f{blVgVu%Hck!V~4NF zJfmW^s{>n?IHirIDGglL=wjE_Wrf^|hiQhkHR17?)@9682g_cX>mYbldy2do!w$&q z-vjpa2RK25HiX&WA}lvLr@(y&&v`;U!N-io#DB~P{3$Gc@S*!jIk)EB!uh>AxzmI9 z>IdGp2cvDjm4p=Ub3hK|kBhH-@JZE^rShl5RDM8KyB|u^7au}L35;@#OV~zJPhrWM z407QZr|-bN1L1K@YP;R=u9uq5`?i8{8+3TIkx@H3oE>fa!X`M{a;zM}^7;GxAQb1X z$kyRlm}J%4bKrRnRFD4Z9plKdPlsCBam1@NFpfZVc*_m%uBn&3P?!FjYk1oic;hpQ zUNLyBs$`75C#N0?s4m5U2?gQVM0vkWR#P)tPG0g^#3Vd=2x9=$2BQu~05bF6i)zB> z=5@$R?_lLvtGOz$XMJErMj7g%0ApWIpbTD=Vzw;ej5uF?K9RAeiQXDjPxEGUM%MW!3g77{#-Z+b%Z z1NJw>h2z?4n(JDc(lxcU@T9(Z*EpT6S(KD}MsS0>3Ey3W2p87I@Tf0@e=s8Hiw&b% z=#w@2OEqIl;Hxyn#qd!Y^LO01Qn)HDEh&SvsA&G-Urf%JmYU{{4=CM7>E9^*kkWrp`Z1-bO4J1^ z2Gf3&_NR0JrGqFvoYKLR9z|&ZrAJeGETuyzJ)Y8`l%7QCCn)_Sr6*HbMCou!M^Jhi zr6ValgVHl8J)6>VC@rCMG^JxGEv0lUrQ<1`Kh|p zP&%E`nUv0^^b$&|DV48 z($$oHjndmFT|?3&K-qV!`*MZOSoQ{BJszJ7mCa(`Fv4I?1w+;`L$he4XE-InU! zmfE-@Kb40`zf^y4iDGyE^_X1sw1aR^9Kz1)_lu<`z~6yiJQ~^E0X+Jw7zV5l8!hMhhQUcz2{XWt0rYaBF?{zK_om&2GrIqPGoh&H+%z=RxjQe_`QgVMZ&SIl#|Jvf6$Q%mFN4}1 z!+GwfSW~Kdi>z@=at~ha9@UfFQ}F0=JTG{3FI;r?=5_ZLJh~E*RL|V)soKpeZ_dX` zI+J_yp+M^VpTkAl7AXa42g-GBD!OvgysMsGjiv!j*{9luEn5ngD^shIYdy|ukCk;N zSEhPIs;jr-aM|EpgTN*?C%=<`!rw`)n!7gD`P86P_vTdhe@TfU>tiNsOY&~0QS833 zCwX^gZ{bR$=jvF&WOXL*&g;DX?twQvz9o5Y0oFFXCwVVl6=Z_pu3B9T$^ccY#G$gP zauC!Gg7<>pujmGMChvus@11wUzimn0zlLhQKUdB7_qpc#^KQKU{vSe}H#`XX`FEym zko6#+#VK62YSrrVuz}%L$z13^*;Zv!oqO|E^kxUj-rRk@E&yfl-(2YJV^XVTf*rg7 zUHb91?&O1=*FPva2K6M@b?(d4bp0QP)+mN#s@>anpOor;TFO9Bsv8EoVhXmm^h#}c zoqGz=`oJ0NO?6(sS9F~C6RhpAtDz0j{GY^2X-**CK9Fi}s=M$RWw+I-8~3CJ0PpT6 z*8lC}k5k=`tc9d5)zk0PkwBH|PVOw}O|9zMCNqh9PZt(4!gOz>0*?)nB+yhEZ(Ywp zInhsuU0=bRRjYP<2z08p#}Jo#QH2X0?ZVuNpYF)torW@a;Tyd$X!3Vwppvb~eASvw zGVzs@zFM}lrwg-t)?nH0mr^}zWb5vrQLP))e-QRFNh^D@pzG3)jfgsjddH^(=!~AL zcGjiF43mn=j@bQ4*DmB)QN3Hb?tn8m5xW=m$a9)Xy20mm$qMqeZ7CmuCD{DUs6t)pDMc;JTYNlm5NHpy1K+VW75^U0(;8OwJBF=Npi-x$8ERd2`q8n1J#H>R8+I zs;*-Dk{V&^U(wrfVyNmBy#*_lf}Bv-e4BVxaADj*gXTeEDXZ%16?Xt) z>h6^n<>1A-_Co313j#TngL-5&se*rdipoFbl)guh7@e8YmssSD7g_scOp4KWhF*i)CgZKgQ1q?Pe`p4tUw1~dZ!mI zXpkCghli;F1FiH-7%Wce>#8l16O=_w`}Bl15bVyobh-&B=F@tsZIY#QK z1zNaSj;OrNU1+3vyKwd5A7w9~tlDCG;euLj2+=!Wm->eC|E2Z@nMO9b5tmt)8T}hU+a|cS8Zd#jbg9*&{C<(^skoys+}AONQqxwW|jz%TXdVC`abygTN|V zL88Y{q|^uRLg1aF_|ib}4{*KM)myLzRt~+XyuC0lY=n4e_3i~*q*2LASFMpoy=vxa zrCDo4&g})04-Cf~>>x*_r4D-vp{L$0xV#t2VdMwPdoX{C=AAGNLQlcEUDK#V<I4HdU8 zVHN5&Luw3qCZ>dKs9(rc6%;%f{6zmZZgL2SZCA;4l@|&V?dIjUu@39N!Fq&lJxuNm zAUn7tgSkMhc=oKqQmNW!Qk@&~uQS zR|J+7vL$zHULkMiz#NX1u4;vN5l`$Q1&^vSrmma<^lscS5cqD?9LyafE&UoL{m~6EeCNHV9W%_|~ zWZcF)lxaZq<@O?un;5-&wpYVF+oQYoD!~`g`F)u=Y#0{` zu&E&x^GKykRw+Ha2s@%64cupzsdNQB-^P+td+x)MQ+s|SOB#jx#hu#yC#_7MFjKqV za^l^uX*j32gJE$oP~O4WO}E+D9w?sLGap(feOE}EoERxj4xiXiPq|djnpRA_ZqOOs zo1a8)DfQ%})Rq;L*K;VK>(n6lBk$N0jM{h&-hn`er@B4`;i|82`JjSPvh0%6Bu7R7 zc{6iY7yL9_=M(6~`WJk4K*IQGuWrBTp1=I1y@LwA+#>@e>}c?i?-ZP|1I+Y3G>o1u zGy;4qp{EP20?xL+3wsjb2NR@9V9P?8@Xgv2em;M}Pg^zZ3H_@LNyA$4I^6( zo&g;*dgM%D;)<24Z-sgk2wQ-#g}efz{^$|;F5JNk)rC*JS#@RGqU(78Z}xN zi)cEZkX;v;w~dJYxPhC1BO;vKecw|)1i~EE)b{WLta2;sm;$pdM+yUvp5YVLqJ4%z3JJ7B8B5*zoq z<_n=`C2zq^rmeeA4ZHsz>T)lVrf}08;*R_+f9Ew}3hn_B^H#ckgx=>63QNg3%MoGZeW1XQD4zrL!KZ?{^gF!bW zwYEy#zP04kQ$&tcj;(LFKdz+eR&Ht6eK2tsJi0~-+#?@?^DSqdg2xT84_8he5>X1f zVC7`kW(d|r5zng1atKDGQoHkak5=Yki>A#(DviXm%wsj!2O0xC)rZewcJGD9vUhgR z+`BUQ-tz0;%e!WJ!K3&X^~`;aFhf2;+mqax>dwzys<0=yw|nwn@43$+;I%V_r0fIF z`!W8(2cGxa4?OP=Jn+2Ji<)Oy6rVkSRPTEDo^i&f z4mT$sfM_E5K+5$r^8@%8j4KN&g^D2^pwOY8GPab3EcW$cJyT|ynyRr-fx#*YCr1L&wS9_K3VI6IfWOq485Jif`tK zoonG?ldGPFGwzt%ytujLn&zT*`MZ~*s6$f)fgciW9|2;uFhZ8MYs5h=n*%IRpJ)$Rk2!pP24JO6Ss>s;_KoY z;tugm@h{?A;!g2xahLdxxLbTz+#|jx?iKfm?~5OZ`^CSCABqRWgW^ZxA@Ofwt@wBG zu=o$LPCQclsQB^E*U$gS{Kv%Oy&J?6u=svb^oot*De<(}Bz`6~!<(X8#WUhr@t@*3 z@w|8e-U{6&UJ^eSzYs5rUy4`6e~InlSK`;=H{wYnN&3; zbq@SEdG*w)bLLjV?`l>~nvy(cM#bcF=)GB;j;d{K6-~{HicUGdsJWxDu{GN!KAoI3 zHCgwje}=XQeu-56!g&L<3x1WlsHvqbQJ(s=vx00Eq;Sv^&2`nh=)VR+*#9S&Ax0_2tQCD zdFkYF2TJRro7%9b;Uf4w_hwh-0bp2PRi^F$DBUE`-tq3714FNVw151Q){v{)vYyci`f$K zGODJXeJHCFF!78lE*^dM-0I0i)!ByHgOwBHOCCxAt6QdKst#d)1hsvr{ny-C)pIK= zXIIThP7Sg;pzB$)=M+u4bW+8PNt0oQKlo$jvbKhrx{`yhh-y&v9lG&+sK;NbawdLU zd}E7b;+R zg_p4dG0j>mUoi^KYtTUu+vVj#v;wwn^3Wp-X5D++rL*+=_ zFt7f>s{TSP13dYSr-54Njd`eVOL;$4AD#~KP6vCZ_#BxO$GjkiWrup`Fgzs=xc@NJ zY=c?vWrJKhVTTj8$Y`euu8kNwNsQem<8GfS3GaPUN#A?cLt&Euwxb6R?GGOo>OWOn z1t}^>Z5Z^(?;squO}AISi;bG|GskPg;u);6Uq5QqfGD z{23vBJYY!oaPiv#{eNV~NjLaf z6Bg{jhmSFZ4Nvclw{R7GY(3TL-CPJN&)17ecfee}fdFZFVQRut*%H5G_z?uZX!6On zO6d?&&_TP81wV(q0KIBn>3W8|qwc40lVas)eR&KNKjnxbZSc_ZG96;i0Xb}3+ft~9 zpdH4h3LcdsVWlzp&OOC2TDHSz*#_mdgPylpI)?WfcgR7s3R3xXk(rRpv zgV2y3tp2Hw909?-p(gpw1XD(@Wrhp&4aQ1k zVA5M*;Ppb0t?I6Z4Bd>pFy{AZLs6+tN#eCqgCs3@NswQl_yVLPwiE;>f2`Ym1P z8jK=$5BHVn1`ab(qaZ_2ERbQQ4J+QAo64-aR>nV((u{$4o-3GxrUTV>?ATo)8%p`g zP$9#J>d(c=985w=Y8L@B18sF)ze9Aa4f?}!`r22HD9ZLH{~ILDHUIhZ)aT2f`4Fjf zQ^cor2{V%nee#vQltDOV!Aj_h^-#lF(Cu0^#d*5zM(cxI3js|lRy*PGkL--i$ro{S ztTk4M0}4gyz>We^vc&G>Hn!6NC>Occ@1cJicgK?ElPu{TW z!E7w%z0=jXX=E_c;YPK;H8S?4?tpV^n^F57*-C3m5%40*KaDi!B(3&UFw2lvrC0#` z?9dS6&3u+G!gyTE1b)fxP~J@``u|tj6C-{qlszQFa?3^tHQNZLLf!wt@eF#_I``G6 zV-&1O(^h)1m@jnN4x+3#^}wLSsB8BnfP%GxL0cnCjfM3ve%4w;XJzum<=4L`vi`w{ zZU8FKUIWhY8eUcWz9R~g^mCwuEy!N*4)EU>u7Q6!1z>O-u&Q7}y=xVXRt(Z>DR4ao z;zKOzO{{&X@-wi!Q_GW8FfsFCrq(ug9L0-j^r-IvmqQn9g^XVC7|_z0Yt_@=o!9q@ zjw%oh@<`J2lIyeOwm#s)!Sba=Dg3G=co8qeRLjg6-Ea6?<@-X}%H(fX{AM-O2u;`8 z!1xDlv}Uaw2}M930SBJkvHJ*Qrs+C2 zmCNr4D@*irvk$2E%0QaWi5(C7#(|dLpX0%F22RylEz)rQIUfGEjt7440LBo_%HdES zMwDuh70ZAxV#|B;Pq%w%pku<3zIey-?gfty1y2H@&t~-GTv?Uex@G+fsfoDIR}8uz(Z1*83y*S797nROIW!y-%i zFVLCi1?7re`W>ZQ$b|idZYbCduQ$m32iUKdRhlg=Q>$uW>^RQqs~i!X{9Fkt54IUl ziQYBr%6mQ(vaFcR?t4o*AjdFR?TvEnuzKo$nS|Po;7*~>vY|&|64Q177QHG7@Aa6@ zwOWCFgq?~VDQyi-<^7Rcz563%BRDPQ+}ZKXX*dIs-NHA0jdV))s8L{}1;mXs-@O)l zk4P6{TA|k<+vPgV8jrMi+Ge-}7G84O)wg*KI@>)a*Y>ZpdW`3cCiQNuS;HKf9+CR_ z|E~s>wdkG&LzbRrJ6IIxUOBgDZ%e+*GdQBOqf@_+*wPDccHpZWCft%93~iMnG^anz z=?iI0c%I0N1RPah_SX0_0&4zo%7Sv_vnU>?0AkIf;TuB6a|fmJc@fu^nU*!cO}7o4 z!2c%_S*_J3<7*>$J(|wA?mK|_6|KbjZ5jBmmoEkhM=5>NZkP`2hMVJ+4Ep;9{d7TJ z<88C+lL&e!?vPFvH+p;lG;W4L7K!BC;PJ-P`i1HkpzK0d?HuLmu`Q^2^OLw+qr5G| zR7Ws7NN9EI=c=QBy!!EZ(a8FhRl&4|cQ@?5^?vEb*$!B@`cyXC6K=rtIhVQ*tKJ;Lu|=qgYj)P?ctPW?aux=Z*y zqpaEt?Z&7d!=UXJA0R;v+u>Uwpf__|G-b-UMI+}f=xEM%6qSxD8&!Jt=ni>Razjb! zsN&Mo6-os1H#*=v@7gMnx3neW+5e6EAkS5K-l zk!Z;?_25@g@i+%Y#czl`!Z z{+H*VM}5yH{#{@cAw4Y}A{pVVvXaV`9vvt*V^!kjex3ajpFUca#X8qf*MZd3 z5FVYC$0Gczb)UaL)`PkqB8dgOGi&EBGJJ*+{fR+7VD|~)gYrzJa+~1XCl8K~$7FTV zc2^KTmn{?l?afrrlwdtKcy(;0I=KGWN%=UFnl>-?=m){$x_EH(_*63<@_i(uGv!QB zXDP~ewE^?%bL1C6ek;jW2Iulr^Jw>Ed@x5H$m6*j`N-qtKJX}nPif)7>7h6xzmoDV z#!7S>@|7b(8Cxm8(w9G7HWKq!Q$DB1wGsK-D1W$J|5ct2_fkHNEhAs8mtQy#GlVz} z|7iIuz5HUz=k!xa`JA1#Qa;zd)e-q?Bl5RVKHGlEXWNgHI~=FrAKiX6CCjl|O!?SX zCjT-|Kb4fvwXZctei2l;l;oQZ=e}`}KTR@0zU!zCt`AZW@C0GdekzYv@Q(LZkT=D_Qy9!^(xM&xgx{5o3>3OrEG zS1F&1-}Xn;KTHM_{2V=z@;UzVD4*kh9p!WVcxOcZhKT%EDSxu9pX)t4*iZS-+W9J^ zlD0nV2+W{3SlfYR>k}#ebS$LvEjybRk$)ZKv+bvRPW}y)&&mHP<#YPqPx+ku!{iH5 z0>0qkZr?=8=j5M9`L0+I?ejXyXYHTzOKtuwUjJ>N{8R1x`Ck63l+TURH>v$m<8*}l z%~}E9DuF}yGmZBmfTmLZGj=}4I8S=A)aR%Jb+MB2U49#R+)w$lf;^^rJf5R6oIdtY zevMs6zPH{QEIX24L!3qVoITBm$Zw?la-07bJo#^?d``XxDPIm--4E6p=eY>}dm{1& z7ocE5l;a;=za`&UlrO8%`PQ0a2IXU%YUr&PwK0PJX39U$reEUe=RwMEf_cT%pQx7; z3fjvoR?mv_8%6Um(*JFAIJ&o8Bz#;;5ZTg=yuNWFIXL z=i0fB^0{_yAU#C2b3fI?wR0G(x$xlp(?rVW>~S9DyT-Kif0WPZ=}yXb`5mO+K>0pB zg5OyNT~!46o2Y%rzaRWJeQCwRYI8@hdn83t$wFLU(<1}8Mj6T}pYu8MDZj*~Z}jMw zN6_C*`CK3LQvM{neruh+gYr2Y3;aoJIJo>G%0B}O>9LUUcgcr7?S5+CEpYC$ah!iwcyjKfdN@4{k_$dw4N@w z`PWfC7aQD3`JAuWK>3`ndX@6$_~cieCEHK=-1>CbCy>y+7br%xFKf!yEPyoIrqX(S z)|P3k8I{c}&5BWV@VPB9YC(Iu7$woR7KLE$sPq-h*ECfwp)7)Cm6WQ_yQHVUR|lIj zjZ;P^Lq&?I2z)A0WozQ`^l6xq;%fPQ&&dthc1Hze`fD*IV=l@xXWANSE8$yynXD?h zsJ1qpSz4QE&8DGcjTsPhR&EMnU!84ftIn2;NmsPAr)R?_CYxI7GS%ro1G%cE%7zA+ z2Z*b)W14DOE1DXrv!#uh_V$XVWOYpiT(rXHEGworH6)WsRgvih6d%aiGuetJA61hs zYQ!H8pM1OqzARVKkeodyT?J$%XWnG`kteuoLxOSlK+I(j`sRA zewi{kyWXjh>A;BZ+tHd?R6{LBRnvh}(A*-e)Tybmbk%}1d_piIP1V>m*kN(HI@1VW z#Vl#hR)8LoK1)U*3FD54)A)VTit2Ic84F6ZjR)jA7)CM1S5zZmKu$xi9xoQEr2WHs1-Ql=~=Jrfm7X4PhqNj5nbnJr6qK4+s6vdVw zlWDHQ(xjE`c-(+Exrtg^V{oX;ScNSQt>+Y+QVz&rL{C(tZXD0x%#+Yv zc;+_2>e6&lno>X$sOU&vQ`+8et!!q%3q(^g-P;$Yj-GanEv;uccdPCm6YlOvO4aAS z_JL}m$+A}O!~7GNsv4FigChYd9i6^ZexDfTnf8pH`8*W8uhU0*MQlQ+k8~IHxh3t9?^^U>*i2hH)!DN2)C`2IEz2q@>+6$C=A^4j(p4~vbFoCu zd6SQc0vatDZGX_Y0%L~clBumSOtR&Zv4D{t=ENEZWh+#WF+qC5wvO6tMSTU#z8Le( zsci&pRHseW!q)V{*5Y(~Yi*-(#@Mult>APaGy|tnIVTOAtH*}TEhsc<)Rr4RL|s9w z8R-vZhIN?)M!D8>*bJd{U*g__5u*%S-3B(EtaR{(n8S19Xif(nx*#L>JmRZ2YF6*7 z+DzadFgU9TQLJ*RrioKbUurdaaKsYRbB6O)>>8$p4vZbx2rK>u+fD>O?`_l4kR-2 zhd?Geg2qmOpAmq)ymZ6Dip$&EW`U0_DNB3NQo26V*qUjBt)z;ntr#XHlVjl*K{{a7 zK$~4MV5%N3Bc`%o!~}yR*r?IaN452t+QsR{OmniSa(ZpJ1B_wV@i5rkOdYpoF#NVg zVt|QraKYN7G>z`wd>p$jEw}I*7N(n9Xk)Vmf?jX~DxQS)Li9T(4WqwmPD!wB;3>v2 zf#~=;ilCvdmQX|)YUROoC7I?=)0|9QGHfMi>B3}^SX>&DS174aE!(SqsGj_9DD-vk&)#ak<-AvnD2j0yl#C7& z!DdX(TL4(0u{v)AfY+5bRhoj#_hVPg#4D0rONrT7;k=u#yQPT!&*c z!c;UxbfE! zJq2!kz^tG}guZnyrC_u=JJzPmwbzOC(0t1oNRQojo3&%UoST;854rj3u)cbN&xivy zXW5G_E3`Q}pwDGM(l&MXpbCA}**6Dk;l7Ao22{hgYG72Gm8w9~h3 zdWNstesJl*jmBhO4A9mn-iLG8BJv0}5O3S{b)IoX>3sB2pDZa3hUvPOKnbJu2Bh3g zllQ8iE*(-;VoW8&vY^C#JQfOnF@`>L!S7fZ{Dy2KmjWDHl}psNBLtm+hJ}OZvZk7) zX}xz(nv+}aOW~GO)pXDfYIdd zEC@Q^-S^{+m3hk^X1x>M8;;(G^^YdsTxE~ZpqqlR3E9>|4FH61fYMD}m?UsgYsfah z&o-)iJKo4TC^w6%FPx`mVc2fgJ@#D^-oDT@^fs`Jdi>i4NwZ#pJ$D%0Fc3mrdoZ%g zl_UJ>WUM&d)t?aj<>cmywcJ$y=!w!s*ZMS5xVTcM;X=UcHutFG~;0AG{YjM5yWN|wh9v+yDS4n zUeGr9Nl1sYJ`a(rxGzS-h>?xZK#|;5pcksq$hFPDz0b+rrZ<$ig!cGZ57U5rfzS-1 zDwxSat^^8}h2t{0UFeF+?4ZnB&E^u%%qSSe%Xwb6il;*9b43qoO73H~MpfotnLs>Z zZ8XOb(S!;IEEm)e5N5P3jL!*1d0X7LQ``0tI|=b7h(NV5y+f4HGG4%t6P>7ICUcLu za0i1Tlh#;<)dbBo2k>ynX#H@=c;Cj4Y54){BnOljH1*Kjkz)@7qXS&_=`rQAk=V{S zAed=m-vWTx><(3T+l&J}Ukdkkq4(v@-UE3wXsqu23E>5b+Zw^mLA$D9^{f``6&Swd zSbst}T-Q6+pH1d|TWF&J*3-qV^>l^YI|1iOYi+o#*Sd^x=CC15-W(?U(CRj(=gYO5 z03ODzD)+z*Y~6T+7wQS#yBrh$-X)A@*qX$ry(R^_G)|lSHg|}c@2@l&)P&EN9oiTd zUmIZG)sv+*rUbMBvg9xx*o#s3O6B&9=YOWh(IL2LU+{7;6Q}L&;n7+7aE~v1(;hOG zg#HdWG{XApwB;TP&PqK1oFnvvL4$j9xDBVCI>k{G3e|AG3*D<%3|^in8KXDv)Gjyd zt@#&pKm#|-<;I+>v1YV%DDnn*67GjXmxF*XBK>5@D=>*QL9mIBMdD1%JkuGV@Tmof zy>$Rn0qoxAR)Tbfc&8B`D!?bI{bGaEph?&{)0%`3S*dN7hq=_|s0ci+r8ZV;#t2bk zp-wB6a{8lqyOEXkGZqxX9*t>{YhM7K)iIJtIZz8QUyN&mUrBFiO4roZ!gD<4)+yKiMxwL%|2BsH zvJU#+$KZdRgZ`};^eY_ne~3YUvx8oM4QajUl+)ks4*I+p^mjVw^JCE8>!44>pnuRo z-!BIJItP9K81x$)^g995de7d^o zgZ~}}{o8I_2mGJLvxugMNsE z{?9S!hdJmkiqZcg9Q3Ie^k+Hf_r{RF)IpDPu-3ayIsH#`&>tRyeyW51$Qbl99P~%U zpr7NQ9~^^zo`e2~81!`x`pOvejSl*P81z{OePIlG{4O*e_V_(I2K@>L{g4>+H#_K$ zi$Q<8gZ|hU^mjVwkBLEluY>-K81xT1=>G!!p~tOGx$(QsLH|w+`V9{HcVp0Ra?qa> zqy5i0=<%E8y4^bE+W)eHJ{^PpRR{f;81!#C=*PyO-{YVk7lZyi2R+6FT5me#^tazZ z|JNAw7^~u8`;QA^$dA4{NPm6|dh|6x`u73Q?ba#Re*89jkp6=h^dlVf(_+YfmV-VS zgC1kmp#0axpr7cVzdi>2R0sVHG3aMF==a6Y{~QNB)~Wklr(FNfbI|`S2LCz-{mdBr z8y)nsV$f$D^k0rakG6t`J%0ZV*II8n<@C40L4QdM{x>`5t76dK?x3%ZL4T)%9&Jju zTc=$6?{&~$8iW2p2mOaJ^uNwQk83(Dw@x|vH#q2VOlUfta`c-V^jF8Af6hUVzr~^X z>XhUEvV*=R2K}oJ`q~)uZ#w8RG3fU==oiMIf6qa`Cw*HpIkbj1Q|Ftpb=Q!xU5QBc6gZ`ly^mPvUycqgxbkP5M4E|XMeSQr7 z*E#6F6odZ?2mOsP=x=t=cgCQ<-9ev-(f&If^!;Mc-|L`%GKTyQI_Uey;J?m6-xGuX z1_%9DV$g4L&|^%e{f16C|M8rIen5=&zwDqN7=!**2mPQJ^lv)oZ;jFZJr4TYV$i?m zpuar^{eB1iH)7EDqYk$H|2JdM4|dRhD+ay(Z8V$zoiXT#Irx7&2K@*J{arEW&vMXz zCkB0~gWmkkf)xjF<8Pva{+<~8r#k3yO+>IsIsP*o^!LS}pW~qaehm6~4*J7mjQ=_Z z{lCWG-{_!!AO?NbL62)nf=$Zl|2hZ#k7CfTaL})dL4UJ@{*f5;w>#(`jX{5>gZ{@c z=O&&S~3uRlyOaM<(jOEKsNJLtE? zpdaF(|9K4hVGjDiG4waWLH|k&{%1Mp|0@Q4se}H=81hea(EmCH|EUi8qhj!%;h_KT z82slr=wFLLKhHtGBL;n)gZ}jx^o|Z(f0Kj$ zuQBMKbI^YfgZ^a)J^q$>U*&(*LI1ZH^lv)oKa4@Y$3c&K@_m*6JqP_qG3fU@=s%7@ z-;aL3*`EIkV)*~T4*J3v^g|r<{a{a{ulgJ2pzj}peuRU5Kn(h`9P~%Vpf7dM9~Fas zqJzG`L0<$h9(0SK;&7&psRS$-tr3-i3Hc8E=^ouDc1GdvuvQ@oKdDfBc5x$|YI~xe zhZ3g&h9yBX-|_u2-=(=wwVF%$dwN(WM;|O7ydDR%hy~l#OZ>~^j~;paio8>KhQF!g zYJU;csN0F{{~44GwjY1*5%~`Y2(WJ&fN;p)KU1gjZ&3bA0CmwHevu-&%A&>702?s_ zFqiygRI-@pQU0xP9+W=|n2Ucs@lO)HPJ;YfAj8GK-ogJ_C>!K|3t%q(4-x+w&6v_4 z|3?`5!jvLth@f8!`7ZhIAo=GLJ?igyI1kGI8^BQh{D5G~h<_o`>jcZ%2d)Va3))XN z(GRf;!+DT?G(&$E(T@ty2gDR-1HG&L`yBoE64VuJ|K-F#SnqShe`P@6Ag>li{y7&b z!Re>ROe=zXKF7#E5??lf!ydmc!*x*p?=$?H`^f*h4F7Tm|5qIR@i|NQ7wZ3RG^ zLj8}=M7!v}PV^I?ZuqvU@P=w151+adpNfpJiN zj4566w-W!T@ngr-cDuGY`u}wY|KTukyZC>F_)oDbg>w+scYG4)UG3jV{8LmK{qOJK zJlOt84FBi**nc-L^sf@VwjV8YQ2u3%{KYgOXnK_YErxGZ_-}LYKia|nd4~Vp#D7=>|GzNw8;Cy2{`N5P?{vsN#3BC~hr9d#l|J%673f|4 zC;BT(vE!%X9sK7q{Pz-nT80=c2JNqs;Xjo4+x};$gZ~#8{u3(|%b@=Z^8X1#e=*UY zZX{PHAcF5$$H<>@= zlO6JZmf@ekjbS)~@oP~2ISl_^NB)2rvxx|BDR&y~KY9(PR6EJNTb4 z*scG=t5y4>#{V%u@6!Lafl5+){Ecw%uV?s==p+AHhW}0n|I-}&?_&60K>X{J8qD9I z{=doa7lTyE`9z8OAL-yf@JP4*?;-xd`xim}X@-7XAN6+y(7XC?KFM$Q-d?7yEe{8u~r?;HpJB5=?EhxU(W%uyX5)qe{Z`m2dP z=>L(IecZ*+H};YK&kX&weWV{%;BNm)qMvLF3+F-mJss#>_P3YxUrh8ke#ScV-^%cR zmiRv#!GAHszX%z^aX-=H<#-4GHyQr7&sBs`@z1~>hlBq_2mgO(_$Mw^`irvvV~%#~?--(=O#P>mp#F{odYAt8k^IF( zh?f^S*#mo#B7-WlHcU|1%B>K(!(NRZR3z_E!S* zF8ysI`EC1~>X5&O;eSOR`QOCw-|65#&B6ay4F68zA7y_>9P8HKtwevm>IU;SXnzBM z-lac*Hx}Wr^;hALe=5U&8}W~d-!5eM4|VXL?%+R<;r}-AFEuS!C&Bh##_%t8@So}6 z|8<7{$(JjBrv~^#6~5zZ4F8ma|7-{UpD_HV5dShCH)Sg}w2t9FpZMGU=Mo41(L>z! zcOCJMT0fi(^e+2bP5kZkL$!l{JH!9tD^x3^+TYCZZ#`03irxOX4*mmRgA(A7|N0W~ zf5uieoCobM59nR(znl1PCwlb%mpS;K%kZCZr6LTrKgfS9!+$A$>4E;?+ z57V3P01Hk6x3K=c4fHPk72(JJ;IQo{i?}oKP5u`!+_o;{|-n0NIpqJ4;eRRdZ$jl- zN09&f4F8eDzn@61oS+rN(LK=0yz2l2PPmh zkzWi^`m^otMu+^_lim8;TiZAL>1F5-uT%6eynTm~%7Y#UdYAsUll->-S>cfX7YzRq z#6N2O%>R_T{iBF}xF@PS3(EfwM*h7H`M>Otzl`BuN&KV6UmHVzHPM#^S^4sz6*BtUc$M9cB{G--STNwU3 zh`&94Z*%bfNC&za4$l|JND%KlPFRErxzS(MR>)>pd@bP4*iv%>TdsOi&Uji@mm)| zUq_73-6!&gQ5Ql(MR3C*~iGg-l6{o z9P&>D0Z}Kx{g-vbAKZiQ2#()IhW-_zAL*kGw|^1PyY#=!A^$@T`M<&N|A_cU_5ZC5 z|DBHhU+duiF2nzfde!h-BHI5ahX2qLl%}^6J+5CLcJQC~8F&A!C;n06=V6BaS)z~9 z-;aRa)qi_QetY~p;*kF&Fc5%4_V+&VkFvkH4E@jsr8vm;9YOo8gaR)4i-xL_cKop3 zA%73Uznu6->F*|ne;M(&_4k;A|2~F)Bk_;2zjqn_^~B${zYPxlOTj_8`tR?=KWhE= z1BSle=Tx^%@%3KVf7}D~uKp`OQT3m#zb75?|B>N;5%CYk57<`w*vas3CH}VkY;^EH z1twUR{uU7bsQB$lhQ5{P;qe0B5w!nR4E>jgK5GB!#|-_qi2iIJchy!KdKlL_a)&ei_ia+JCpB{m(ku|1!fr zf3ad5CI9i@pj_=AO!QIm9}V;_`PVz-f8HT~4a0vF@ej^lD64&}XXwlONPj#SsH^=| zL_fl22Is;4KN{#=?ce5T|4Xj+GyInj|FQu8VEgAW{C5(6+yDK-!G90K|DitW@6u6j z{q-{RLH%_x^gn0lgYAEhp?{O;qx$d9K=10mp(iOxZU4R9p})#=-0dIKs5&mH|E2@I zi+?fkxBKtc4*q{;_?Hv^sQK${hW~s=`(JhNZv+9cPlD@*D~Lasm+!!`_OS@)UF~1$ z;QyL~{|gNNmBfFB%?!?i_V*0Ke>L$>5k1D=I~@E^f(MV zIQT!s@E_cy1fL$!{wEmzgFc}&Ww-xL2mcdCyW4*m@sDc%5TJLpzmoVv_s9eF|CWRQ zHirLKiT|`f`?0U=<3Abx%N_0C>EPdgjJy4>5Px_)%6A0qZ#F~!Hql4f@5Mmx(%)8x z{JS0U|A65?u33p4CI5bg{$iq!lK%rn{=#8l`}>na{`yk4{=ZKAqx@ej(7W_^Iq|ps z|6T|GO$`6F#Q$<%?<-kt=t+iuEAgLCh0*@saq$0;;XkNF5z=FvhGo$H-e>r4bF?3S zlW!2!r1f(4ShxP?6aTc~tWJXbM*_V||2v7lJ^tT!@NZ`LKS}(f`oDqUKlGDIQr%9} z|2_x*hZ+9A>LdRjG5m`i{QvIY{~^QwUE&Y!-FHA0zT?Jw30D7~BbpAo>d{&f0xq7M`k&k}tQ*K`^$7_a(YjTVgx zv5n}<;Q1Q+(DG~SaG-bTe>JuL{^L|h9Df*NYI@y%w6CD*EV#4Fx~b(Rp@tt;;|A%5juSZ4|G8|%tDO^8>$3+pT)UbC*e(}eh~cVV3+#Ov0T zcbbr2R`ag)Swj3?pZd~-{F0duk{1cFGYkTf5W5(BH-rC?!T-$Qe_`-<8T_vdj@BMN z5@KH%1SBE;#^4_^_&*rj=_aB6Jll*7Z9?FebizkM;HV5A3DKXy2Qc^`20xs^@yjaV zBO#7r@B#)un!%4{aQvc2_(%x!Lg6DJ@Cz8>BOy*=aQxy#_(+IPGWf|1Uc}(|MTGE? z5F;4;GzK5Z;Ab#6zDXZG67p-XF8my(dxePv$ z!7pHNd;>RpB*Y{JpTgi%8GIUprx+aH$P6C|fp1ENkA%QC7{frcv4p|#jfL=$5X%_+S_c0DgI~wsH!%2e2FEAc!$(4NGWZGx zzlp)|$?fow5Zw&^6$ZyAn8Qax+`{0i8T@Muej9`1lds_;A@GUR@R1Psq-gj^h;K3Y zoechM2EU8J?`H6O82oz-elLUL6M*3(A%4K%_cQnp8Tf#Nha(SNKTCC$L=j zI;K26@f1E1;>Qe*PZ))dgm{d>H!%25862O02_LYZz~E0a_$CJb8G~B4E`#EzsBG@82k+ef0M!A zV(^^|{x*Z}X7E2U_@5XY@6?2kguH{|!rx=czt7-!Cm?(z#NQcwKZAe7;2$$MY)J(U zoJnz?su1pD;&Hx81bQUgN7BDzN!w-uM+)Lw3D7w9IO6(uD>eRCs(&WcPusDQ3#_9< z^5AW2tY;_f|LFZvB!G2vsJz01PY(z&U6u?Nua!`E$MqVCYpJDp@(=#zv=IG0fX@Cy z;sZnYFC=bDt%~4pM+rfjiWb$Uq$q_JqE5>s9=!V@#3d3xK2-jCiJuU{e2Nxam34Cnf$^2uA?+1Ldd>X2QN=5R%v64;fqz;!qycAHom-KgrIdj5VeS(7vlHenQ4rU6iGq08&tr*% z_>{jOT_r>jgP+3S!x{Y33_gOvPi64a82mE~K9a#tXYex^{7eQvi^0!k@bG+!1rs7X zpDH{&pDMfrlhBb66r=@m5@JjMQI`o(%HU%e93B>M9I&74K(Srn`5g-;%w1bQSwfua z2k0sx!tnrRB^>d9!gUl(6;P587x)2#U&!F)3_gj$!*K`}Oo%B=`EY!q$|srf(-{0B z22U|~1%qGA;L{m=27}LJ@Nj&E1!4c3DPPIpmoRu0gI6>790s4u;FmJ^Wek2fgMXI6 z!|@~*g#CP`{5%G~iovgD@HB(ZXYd*ZU%=qC3|`0J;kXwICd5Lfd^jFfKAVeoG;cz9im1rz3}H9uKG z+~o)8Dj~kZ;CD0lcNzR12LB#|-^<|lG5Gfx{09tvKZE}(ga44hA7JnY8T>~K{t$!z z8-uT9@PB9UhZ+1o7UTGWd@fd_9AQ_hGOg+~;D-KhEGA82kwa|0#n%$>6;q z{0m3G@32_U!5%{;Iwiit=^uOt2~4E`I5KWED82}kM{f%_M|bo~^i zzXJSdxQ|do*ZAx;9v@NpFVXc&3KmBl>2B9?fMfl^@~09$Ctp=?IMp+j!IOXwx1NI? zMddRL-bM9XP4%}>dcQ3H7Eyc8599Bk47Z;1TudeY2)L`ijyy`W>xF)*;Q3U(7;snl z3#k0y{;J@0q`x|*{H+ZBT?YR>gMYx_A2E3U0=N7n3|`CNUt{ol03U8Whpg@V1&RNe zwCMeA)DTdnt9-e{Uoqu%J@Y00SA&<)*&3$&BNE?k%7a?uu}k8=GWY~K>wh%L^BaTf z@)IQfs=+7G*_9H1&EUHHYKi~W;JW<30gmHk#0kfuoC8cf z#e`=iKFHu&o_i&JcnE)4;zt|&6fFVhX}BmbxR&!wi4QiouK%+VKg!@*&Tha_|3`g7 zRa^>s$K!s$!6ZV*UIsr46zD2Hj=|d*{CWm|gu$O=@Mjpj-|=oak7Mvk2ET&Azt7+g zGWeT-qy8tKrBqF?A&QR(zj~Cy^^U`FC#dq932&qxI-T&*=O}vSc|9fI2=?mefi?dm@y9-gnCllV!7ul55UOWb=-`*h+|G!*6Z zp7)+kc)7%XZ{*SSv`PGAQ~!-r;=2;x87lu@5-&34%c#UfCnDeB27iIhz9{jq|9L>- zBTRX%hrdYtkA|QxCWuc`TOrNQ2iA{({8A ze)3NeKhu=ga()^NW4L&isJ(t~mH64A@~fHh|1I&qntHUJkNG6lUt;Rf^3Rg^IR@AA z-zD)6Og*~a-(wIfy5ZhneyNK85v+H}dF+IV zA&E~6;co%%@`ooBVg3D0dEKtL68D}<*L+`*_!LuK>#gV%tY@mhwLG7b__PrIFyJnE z-jL-}ro5KtFqj~Qiy;Qrb~0Y#(?j@FrhJ>kz31M~m)aNNZi$EeNw36bn)*wr{GTNr z_74T0MmcAj@~2Yy&q&;R??boiN{L@$%4_?4M&i{5*M8t*iHH5ns1e9_t|_nUc~s(I zKXV!gHr#ry{uz>Uw#2>X>UBNWO5A&{9-1$YZ%BNe;X8})-vI9F-`xz3-+>%1t~T|+ zr96sHbJueL;4VM8MB-t8xIyCcP5m`g|4E<0dKMU5uY>Trf-XP#Wr^3C^4k92mUvwV zp81Ir06m#KV4XkHo#_|7)oH1Q<}mt>^!>oUIaf_(O?*&hXW8z9I3&A$-gk zSbw9zwVXW?_uj|RcDqsHV@!FC4?Yv?DGlM}5+7^u$<(fE82llLFEQn{{97fSHFy)9 zodEI5aQO=ds^Y^4|Ek2j_XS{Dl*iK&5BuT#v$39QP5rw3`4Ydt;JUrHN!)v{N4IMm zgC98x>tAl_(e0Wo@f!@T+qG8WHyT{G>q3aDhFk9!XgQZlJnY{dlK2W!kM^IBOZ+B- zYrFcb#KV4dkHo$A5wsr|R*dp=n|icZ15BsH)VWJssy$7NDt3u-5dk~YT{&f-$`!W2!$#8L}kw^E-C1Vly z-jC4ucO`z8DG$S39)reV`LJJ_EAhKcc`av$#P2cqB&z2{i8mNr+uMNgSpWA7uH~te z_`M-~jl}OWxR!I5#G4JS>lqD(H(azBT-(nV8T>hkf8LbW^_(yP>+#-iI*-~_$>7}* z_ulU~hRQ!J@%v5v;Ev>R%(+{2_zGv?7oD zCGNf7q51wz;t!khw@~?c&_LICxeM^&)_YhdQu&`tJnTP@oQUPWVCvWUtdY3hjT7cc zk#!6{5CXR0^675HQ0ucw;*Xg6b-UI{+*r00uQ%njehOfK54YYo(e->@;u}nP zt)JZz?=-m9!&w(%JwG+Lw)0AfhyCzX5)b>~8v%Fef2Az%z0acU`DuxV{cS}#$`kgV zH%a_yBd6|{$0WYd;3p|{i=7hRWbmU2A2P`;=h+NC2JqqHXQm#lwnhL ztp?X}_DcL2gKItKPsaMcX>cw7*%E)&;MyLpm-urA*Y&KEc-X(aEb-?}d0o$m&=JF} z_iMC$ehzR~KmLm>zs=O6%l}d0FBu%dczK*X73=?n!NE<*<6()1$M11TEdNVWUe~`& z;;)48dnE3?kE6>En1=OiH|4cFmr4BB2G{cJmUwu)WG=#b!sDV_;$eHj>&KR*-e z|D!3d>v>$_e=@kPXV@$(AC`Zs#P^!=y1!1Gjpg4l_~j&LQsV!oy|a&#t11uws);WU z-ZYd{didZAq3L0%d zD=Jt}sG_C{Vt>VoG!}kpORQA!_oFS9SU^GgJm;Qs=R0@qotfPY|NZ9kNp|OZpZlEW zJm)#*Jm;J{vxh_eX3L9)x7z=8!~Z*!_pJP3!&~j#G^XV~9?Cm=t}y)9E&Oi7pA5On z-ySo()y|ilqxxHUI)N7rZ?*qZ3H<&9e(boG``ggY6RaQ3G`#WoDK}1TGQ9DC{)Cmk zLHP0ZcmB9Jf&aboXHzox{r&{`M-uo`!k4zH>FLQ92Kxt7Bd^I+4^W|d8Odz z{hfuH@8!!gwR&}XzAl$WQ~hiG`f7hiA@6UZIP5>h;s-jd`m!t{h)&?i>u?HttRJ*Xp_Y_FA8mUYOZhFoLOo zd3AqRV9#J~GQVl2PrA=o2X9in zlm3)n^+al$C8>IKw^uI{_2wqal{(0<=M~BYDNXLVV8b%&%~WqjP$5?=yxmWa4U2E` zT*@;t3wA@8X!bECW~&v?0+NpI2*8bROp z76NCePH#LrAq}un^qjkLA}xAGQ$vn7(SAqAHjQRQaP8>ERVzoO%aF^@ z;zW5(HJ6_nFJ!%}S|#eFdRyz$a&gkjs8WX?po+Ejky`WTF8&(^4t7+r|YY2dD(h@DObsq3fcNV z(XZ7qrF1rzkvElGp_*A&Dx}kC$kzONrqm=_;`N~&eqI76Gc7u%(`jc!wjQ|vjU7vG zC>i#~w|Moc?;8_B1GDv1ub1_UQnUnqCfnzwn=Dk2PW8K+y+Wx{%w&hW(Jd+3J|FF< zPppSx>mYty?qw$ZnR=nVTm8-!5Vy9N+~3CJPRbe<1}&Sd_cc6X1~0Er_p93N#gr}5 zbeVB+?6QW}8dt}+>`13KPIwz9dNuerh+Lm{u4#F1ORna-=5J7SdBcJRr*y+d@z)#o z&!?rrQZ&fn;hFNJpBVNiu#=zL>Tl{Rt{viiY+4|j@>*QouGysU@pVb97PM5mQnOyr z;e)dKTg#4bm#>6L~w>*tY)2SpDOsCY#jh<`5R)&scUbIUF4c$SRC=KqDut~YT9NXum zal zmsjztwepN)xb@xMj^4lpk$h;xYHLlD%!N%eI}4KCj{CLkB~8LNB$gWJ$;vElS|d}g zc^fPKOi4x&lc>h0uVFUc*H@ApdMdZQSRX0ROcl0nmyAG?Y11#98%DHhCBGz@j@lAp zTL<@kb;NtC?e!$voqXc;i2l^_O_gFfH`#2c36d5!F0X8_P0KKv-02ML(Ub1(v1yB`uQm&6KQV{9GxMm!?eRr*l=weRGofXY$hLtTWbSYlC@N z5LE-4w9z}?JW$q3jIC3}{T^e)7*JTY)vp%|GqN7b7kfl^zEtU{)$+NSDZMUZ`SPHQ zLRoByF|OY)PtC@j!F;h?^JjBM5KFoc%y0AZ)7wHHceR|cftjs`)9f4;6fT^*D$%x< z$i^-YT@mma9^ zuK2+eXxD!-2#=&P1<4U)5D&(0=qt@ypROlGVM#S^lo@=&lO=?f2(9C7)k+qWWafCF zwy`d8J#^U`89mP(*_a-SuDZukmGqKw`#XzA{2FTmcR(t2r@OPL^>8;qrpFg78akbFS;b4fC(OY%}lP40%M}yfUek$lR(#y#0=c=-EA!|ULN93REP?;1Z zTWj=!)U2$L9nGo+S1=vc>^PUL7i$_X(V0+pDeRmlg$EPngzNwfdNRS84qYzR(z+G6 zA*;Vl%5RczN}LyCC$AWN!6+p=Mxm0iHRIWGHdro5fX<6A(yHX<>R>6G<_n0J9+caVCsc}70SYxhj z>|01*X>3|8_ttxo0C^LY#zulMLTBgIy1`uDof(^+PVboTWYIh>ZDc30L}P53(%w4j zX2z$}8&$S-7M8#bX19$pI+|#U?wqFjeA#5l<#kgazb&J?tmz$YZN*u1ofMKh+sjgy z(`afa+%s`Wrc_IGFVDMkjm)$xB6z8cH*+mLwlp$=abwuhOYT&!8*5j&)FrQo%anI z(fW)S66U4z(SBrX9F`D3y3>>jbAv$oP3Ij$RVJI+vZ!dc&y$b?#fDI)Y& zR!y17A{dI2|z++gQ3=K__tFdCZ%R$5=M(o?Uovnt{5zL^r-o5 z+hzLG{Xo~HlZsAxUbYFf z$m|=cox?UnjDN%3Q~f30zj`E^;9*w8?oyXdywby*A!nT{=@ZYH|o0_<}DO2)% zL2h!gDo5evDe+#=eatzyWJP`LIogoBKoC95k}y)Ljlb-wf2XUu0DvkDJ70pwav@dRKEY zes)wmu}b1sP0CL z4};NdkwtVih8KQB{HE2d`vl(G5Z@I@vh;cJHKd*3H~WVOOo%ve=Pyy31U%DN~*O3W;eeRJC0oMJ9Q-8i_C5 zERAH!YkBCY<87%->uoX*H9cRKFS-MlrV+JMqx20(SJMr_rd5nrDc9ztPBQ9nLFAS~ z@!m*!CT2t)ymJ$K>?&6V<(O>`6E`xMv|9*D=kK(hYT)%xPyB+ULCq70Tz0wX zEO`dP(#)*WI!;;BX?+4d%ul&kvd05v``SESEXBIqP#)4UYb3V5zP>|a;Q)nKJ$4nB6tbJ^qTWZfcb$KY_N zoo9x__>|RFaM;-2=Xs^vHotXoga-+A^lpB*Pv(+>HyD+;XNUVTAAEaF+c~}wbqX$zl zH-`3RN}bwVPoTob+Ge%%8kn(Lsu0si=$H7f157N z!mK7%rc`oI%go9>sAPCwBMe%`)lU9S>4I5~&E!Eaqs4s!AT}-=kFNAB4`)uh($-IO zR{brxVosh=-I5ety^>V8TrbuuGLXg=9aOCCdRFe#28qn+-HZ{OC)=I{E;};Agp2$J{IGlHY&p~nZxF2a(AT9y2>ru^-t-DCd*9dP%O*#Ew@OC>wit+vE7Ukvo}6; zXq$dF>k?W!Vz`Qr>k;ZP*Bxa{@92j3e&zh0oZ88Ul^Us!yy;@WZBx<7V(=lLcDkFE zgt~IpJVC1!4xNdMj>w^$S%=22JmQb!+AjyW?(Vh%?kuRO3L4Szr_YIxE^2coRlBhe z4d<72?d)sF2g^!{6T5KTqMv=&FAvZQ@`sM{`fd5|nGhC~K=_BJfs;*#}x+UIhZN8 zMQrN}Y@1cOqX#iN%$aqY$raDwO#1E_91WK+N#JuE65rv4&Iw_}fbh;XV{gZt$E|YJ zDwl-Cce&Ws;Dff3?gj?~b9vOZ&pm3ptaU-$u@ce5O@<$7^0>L8#F-*=;2g4nNLxfZ zAtv!Qd+nMTyXU2kpfRDUHi5yuFD=_-q!=%kqq|7+i4>M54THHZJ0Q<`N#N*{XLEW+ zTRtxlJfpq5HE>vLca?03r0z412v{X(p6szp}DJ8f?pEbg|WD z=TYQz_cmtdu@pXu6K=9cwp4Wr?6Xs#3|+eQ8#4=<0|c3t>@|4^sIog@YLw-;of{=3 z4)!{e-Pk$+v3=(}Gt6;9Y1ybw%vDC~0wg(*P9X{Gr)9U&f^DD&zc-Svo&rE8Ahf zJNpO@lu}Teekt2~!Lw%O@IzD9HmP-N2sLNhZ8F~2yIF7fgkCV6cefyl)z{MKVNl03 zcw%o$UMEF++pN6R+~)IeT(ctja8M@M-~+5O^32tb&FWiR+7zELZcXe*$!?AGBWYSa z3e;1-;QN}it(y=1^srjWmKkwVN((>=bG~I1DEo;uL+sW7$@@pTdB{Dv@I2A$-x&q@sRuI&iwQqMY`*R+KginruUZ#Wk6`TQUnY z*=$>^ucgH_idq`BFXLuC*RZi-sV>Btyep?Bajn&=JbKsJF>T!GF0n4=F0(V-(rpGz z6Pcq|QOlMcn;zZLE2mgtGln}-@|lCMB}_YLdrMw8RFy68a!I~WFfX4+2*2;gtLL_+ z%@&j#yqEN$W65x3EiDf;OZq20Qofu;?FxF^uzXF2iJJlaro|vj^CoL$Pri6?vKT8A zY`2+*pk)((mwsiVSFvAiDCZ$|bKibP<{9?q(eiVl{5!ND0P^+m=B3|POzvCmkh${%kPI{u{P?i$em?`E>C59^?;#KLP$z@J05!O4ScPu`=>&&&v{c&2s&r-y-bFy#ZXmZP)Q{C-DDF z;72`2OYbpX#7aG9CGbgb{We@z?p|=}`8qh|e+EwZXW2MXbID(lz|R7w{`KGw!_NKS z`t8Ne{#z6HH^KiI@;|fO#q9wbCyzw9`=;MtMfjL)k6%N-ep|4!XN3l(yi`oTz1Z=M z;Qs|)0M~CdcJfz&KMH=M<<5T3+H))9^;?9Up8F#5MJxXxnd3p+h2 z@W;T@;Oa9c|JDS)9h~j*c5v;3PS5GjYuKYEFR))kdQQb>k0zV4!?@8d-f*%d}8x#1w3H(8D+Vd#5j%m(sPlF!={&Ed8 zc?s${7JLYtdeY$3E>cK#Hcc0LJCJCC;Wr0SuaF9xTbXMxksOTcO8esJ1(0GxK}-woDR)SnN5 z)6T=-v~#f?UsVt7d=w0-#N)KKL48kv z{JX(l2>z`Ees2Q*O#(m3CN^p(^`DWzSAo9>_M8L07Q7vxyI_b3-Z+SeQ@e|Jfi30R?pKB{+E`&W@+Gm=g-erK4iJR zWw|TCS?(Ikot|5*o(+(vp7Rs6rA-s)pFItdc6|z ztk;>4XT7e0yxMu5E%%e)EcbfoVYxRzp5@*Qd6xSiu?%?kQ<*J^A^6xYo4^t8TD$7fjyLkAH^-mR? zcJ728`sbaHr=6EUo_2l}T_0O$PvT5!(q6X2ZR^WYqpt^(J3x%vGj%U!$l+WOua;eD3h72yMxe-HZU zhaV>J2O@e_Sv@~bkbexE`M{GAJr}EE<+b2d!Ov)%kApKG*kQTz!y0SPMUZE`J^;>n z@QR2Ymk(S8dFuHjIQ3i~(Q}Qh*B2m9J-2~V&)1-bad;=>8HfJ@&iVA;p@;GROUQFR zeGKv}_i4zp+++V&qrDinBj6ghZk`$k=e)B8T;<(7_1EB(|Hkh($~|3t?DC2qfYY8| zB=Dya_z7n;^i$92;4HTnoa>0sf^)s_HE^yM{vDkC{rEo!>~V2^fsOMemPh-`so;#O zS4Q+qTRmq&p7HrcaQ5HT(8D+xg*@ZL2WNcNp@;Fg8}f|Liy+T(-wSz``w?)q<8|Oo z?f9Dbc3%xndHp-m`cnV1-TyB*&qtoJ{AiKq`N(l+sutNBlYivvELZ*aKdTYvZwBYN z$!>6-FYHa=`gf=GrTSkj|G9p&u-D)ger5tcKY?GGz(1S74<_*6Ch(=HhMhd`NG0&s zfwR4G;PmIE;PmIm6Zp@;Y0s|{_`<%1{j}#bmTP~vUDOEnL;eKG#aw$0L;i&}N7EZ# z4^BO+z+VLUwa~v9`X4&R6yGBu*mEM}PYbY#6CJM}wsP|4gw0FiO8Fy}yT3adXNrBV;K5*8zADr*Ad8a1J=j9Z%rd1U>;ydp3dF?O0>y zx!^4Kyaav$_;UE|E#PVJ^TA&Mej&I`H;g?V_*%$s1}}h9{vF^s$TNNhz!`6OaJ$VP z?(=-wP7bu+hdkqL3Va;)u-qK@R>;$SjsqWrJjbQagHJ=xH^C|Y0651nKKH_QTq|R> zzC?9T0s6z=@XNq&2d6ykd@tmaIQ{TG z$amw1KZZR0@F(E(1Lp<$;d02+4<7)hAN~}aexN+-OZg^ z^fSkE`gt$ppNa9A<>nAS9IrS&Z-zbpe|!#}hdff_Gvk5tCgb61`2VG7uRjOpc*u4f zg}m-%y7BfraLR8@;1_{^40`s0Q_uC_wDYzEZnxjeJaP^6p91-7!Ro3xZdG<`4-5pf#1Fa{ub~rgTD=&^Z3Q!%m+RJ&iV0+;CiO*{QMp8 z+rWPceiQf;;C}y!KcPQq&xfIh`3dLQ zufm=?Ab&gf{{yH0p9E+A%((gn^e_&|8E;(IGv2-lJ&d<+fzv{pR3-#(I z-su0Nc;k5cchJu`ygPw2Ut)ZI7xJ8!Igh6h|MyBCcjFK3xd(b^&-WAfz2Kbp{}Fr` z89IsR~8=mF@V z{zKqN`ng~I6UcM_nd2w@&-wan_~&1t=REKNcpjYN=QeQeKQK?@yniX=llBK5M7i|C zzkzq-&!0g)Ne}(`bI8-593SY<{g9_W9|C_S{K@<+$)6ktIBs+^4m=F|nb-XXILC*i z@rwLqX!rk0(8IXp`1VW4Q_o>=+Qasuo?k(p{f^@p>-!kwssC~Cq;YQz>dSGDdXnn< z1oTt>H{eO-rn@LN$v;m*KjY`O;4GK?wJ7&#$WssNn-qtf-+P|Zn5U?R_IIP_+0esw zUjWW=dm%XYRmfkD`jW2$e=hVe9_R;h*6V!ec@F$Z`;UQs@?*g{pB@K30{!|-rOO8_ zHs`8RY|nbzftEu4c}_@vt^j{N_-61IfbRi63Va{9mg`;z>@Ujn-*Wr@kp1a+)xI}| z%kPd~Yx(a>&Z93a^N03#eZRu~uJTJ1*jEPfZjR7P(~x(2!ph$duDT8=l-Fk>{1W^A z?g*dIo8+aRoz$1Ub$wsoFS6J5hyJ_JzCY3a)Oxu-BER+wSgt?x-#;u++SB98aeUFj zfd7$|cY5r{OnNj{^`$>tAJO;MfG<^GU$=vw;-LKeG5D$APlCS!{3Q~T`qIlTH`Dj8 z13z7XeZ2+z_Z*a;?*vy}?|*J^@jaHi`nr4eN92#SiR$Mg@)y`L?up2+vIFG*iOBzj zm47@Uf1w>o}Ti1z};M<{1I@MV<>+jqW=Mf@>*=;PV3cgNbuhP_yG6> z_#k*4dAfn zb{pj11o`{HGvJSdpAEjmPOe%nmwV{tVenDNp9j7kJZHJH^C5d}59BvM-hFR`mb(%B z0OZHO4}qTpZYE@TuX@J8m#QK1Ql2%x1^=x8p8($sz6pE}__^Twz~2mh0NkzJ^ztEa zmz$Z}jt*{CJKdb1WGVO`1|sJF72t0H-wggo;CsL?1m6elfgb?h41Nea2i~(Nc%$}j z0bdH92VVg`3BDQJ2j2re1-=h_EBFEMY4Ahf1@N9@f;VdaTftvoxi*{TMT=}+#m_Hq zgZ!JIrwCpIFM(eUJ_G(a@G|&4;1zK9T%p?kHt^$*4c;gZb6fe{eZE9_Ef6vPk3qf; zUIE_@ekJ%0@SDJQg5Lwa3;YrA-QdR`7raqB-wxgj{toal@OOe&z~2RaCHO_)H-TRa zeh>H_@JGPk4gQ4XE`EA#{46;>5Yl>G0{LO^OTo_rzYKgA_NRTXwcv$;kk;!%kUtIl&%jrMe;9lcd@uNA;2#0s4}KN+9pG1kKM4L&@C7dl-l+Y5 z4t^TATSMsO)!-k4{3Q4_;Fp143%(!x-AUQXMleed=&f!@FMu< zz%K{?JorZ}cXk%7owq>#3y?nuek1r{@SDIF|4#5m>-9zO0r0;Dp8&rZybgW~_+IcY zf!_lDW$=UGw}KxAzYToxNx>Vn|8Kwtz`p`M0sd9+I{5A2d%?d3ehc{5!4HCe1N<=f z0r163f;Vda-+~W-e-nHH{9E94@H@cwg5L>#3;4Ie4}#wXei-~a;ER7Zc%%0J9rytF z{|27`|9kLV;CF+66#Tp3w}bx!_>aNA2j27I;EmdO5BO5>?}M)ZzZZNn_&lte_frame_parms.samples_per_tti>>1; else len = phy_vars_eNB->lte_frame_parms.samples_per_tti; - + /* for (i=0;irx_total_gain_dB;//-USRP_GAIN_OFFSET; - +#if 0 switch(UE->lte_frame_parms.N_RB_DL) { case 6: openair0_cfg[card].rx_gain[i] -= 12; @@ -555,7 +555,7 @@ static void *UE_thread_synch(void *arg) printf("Unknown number of RBs %d\n",UE->lte_frame_parms.N_RB_DL); break; } - +#endif #endif } } From 98a05dfbb816cc6d2346a3fec408c865f5780557 Mon Sep 17 00:00:00 2001 From: kaltenbe Date: Thu, 11 Feb 2016 10:13:43 +0100 Subject: [PATCH 18/55] deleted unnecessary files and added lmsSDR, lms7002m directories --- .../LIB/Si5351C/build/CMakeCache.txt | 326 -- .../CMakeFiles/2.8.12.2/CMakeCCompiler.cmake | 56 - .../2.8.12.2/CMakeCXXCompiler.cmake | 57 - .../2.8.12.2/CMakeDetermineCompilerABI_C.bin | Bin 8587 -> 0 bytes .../CMakeDetermineCompilerABI_CXX.bin | Bin 8600 -> 0 bytes .../CMakeFiles/2.8.12.2/CMakeSystem.cmake | 15 - .../2.8.12.2/CompilerIdC/CMakeCCompilerId.c | 389 --- .../CMakeFiles/2.8.12.2/CompilerIdC/a.out | Bin 8683 -> 0 bytes .../CompilerIdCXX/CMakeCXXCompilerId.cpp | 377 --- .../CMakeFiles/2.8.12.2/CompilerIdCXX/a.out | Bin 8692 -> 0 bytes .../CMakeDirectoryInformation.cmake | 16 - .../Si5351C/build/CMakeFiles/CMakeOutput.log | 263 -- .../Si5351C/build/CMakeFiles/Makefile.cmake | 43 - .../LIB/Si5351C/build/CMakeFiles/Makefile2 | 102 - .../CMakeFiles/Si5351C.dir/CXX.includecache | 8 - .../CMakeFiles/Si5351C.dir/DependInfo.cmake | 22 - .../build/CMakeFiles/Si5351C.dir/Si5351C.o | Bin 144184 -> 0 bytes .../build/CMakeFiles/Si5351C.dir/build.make | 106 - .../CMakeFiles/Si5351C.dir/cmake_clean.cmake | 10 - .../Si5351C.dir/cmake_clean_target.cmake | 3 - .../CMakeFiles/Si5351C.dir/depend.internal | 6 - .../build/CMakeFiles/Si5351C.dir/depend.make | 6 - .../build/CMakeFiles/Si5351C.dir/flags.make | 8 - .../build/CMakeFiles/Si5351C.dir/link.txt | 2 - .../CMakeFiles/Si5351C.dir/progress.make | 2 - .../build/CMakeFiles/TargetDirectories.txt | 1 - .../build/CMakeFiles/cmake.check_cache | 1 - .../Si5351C/build/CMakeFiles/progress.marks | 1 - .../USERSPACE/LIB/Si5351C/build/Makefile | 157 - .../LIB/Si5351C/build/cmake_install.cmake | 44 - .../USERSPACE/LIB/Si5351C/build/libSi5351C.a | Bin 162342 -> 0 bytes .../USERSPACE/LIB/lms7002m/CMakeLists.txt | 63 + .../USERSPACE/LIB/lms7002m/LMS7002M.cpp | 2612 +++++++++++++++++ .../LMSSDR/USERSPACE/LIB/lms7002m/LMS7002M.h | 177 ++ .../LIB/lms7002m/LMS7002M_RegistersMap.cpp | 68 + .../LIB/lms7002m/LMS7002M_RegistersMap.h | 35 + .../lms7002m/LMS7002M_filtersCalibration.cpp | 861 ++++++ .../LIB/lms7002m/LMS7002M_parameters.cpp | 601 ++++ .../LIB/lms7002m/LMS7002M_parameters.h | 613 ++++ .../LIB/lms7002m/LMS7002M_statuses.cpp | 16 + .../LIB/lms7002m/LMS7002M_statuses.h | 48 + .../connectionManager/ConnectionCOM.cpp | 596 ++++ .../connectionManager/ConnectionCOM.h | 62 + .../connectionManager/ConnectionManager.cpp | 314 ++ .../connectionManager/ConnectionManager.h | 60 + .../connectionManager/ConnectionSPI.cpp | 290 ++ .../connectionManager/ConnectionSPI.h | 41 + .../connectionManager/ConnectionUSB.cpp | 762 +++++ .../connectionManager/ConnectionUSB.h | 144 + .../lms7002m/connectionManager/IConnection.h | 68 + .../USERSPACE/LIB/lms7002m/lms7002_defines.h | 218 ++ .../USERSPACE/LIB/lms7002m/lmsComms.cpp | 326 ++ .../LMSSDR/USERSPACE/LIB/lms7002m/lmsComms.h | 111 + .../LMSSDR/USERSPACE/LIB/lms7002m/typedefs.h | 18 + .../LMSSDR/USERSPACE/LIB/lmsSDR/LMS_SDR.cpp | 334 +++ .../LMSSDR/USERSPACE/LIB/lmsSDR/LMS_SDR.h | 143 + .../LIB/lmsSDR/LMS_StreamBoard/CMakeLists.txt | 22 + .../LMS_StreamBoard/LMS_StreamBoard.cpp | 770 +++++ .../lmsSDR/LMS_StreamBoard/LMS_StreamBoard.h | 107 + .../LMS_StreamBoard/LMS_StreamBoard_FIFO.h | 122 + .../lmsSDR/LMS_StreamBoard/lms7002_defines.h | 215 ++ .../lmsSDR/connectionManager/CMakeLists.txt | 34 + .../connectionManager/ConnectionCOM.cpp | 596 ++++ .../lmsSDR/connectionManager/ConnectionCOM.h | 62 + .../connectionManager/ConnectionManager.cpp | 319 ++ .../connectionManager/ConnectionManager.h | 60 + .../connectionManager/ConnectionSPI.cpp | 313 ++ .../lmsSDR/connectionManager/ConnectionSPI.h | 41 + .../connectionManager/ConnectionUSB.cpp | 771 +++++ .../lmsSDR/connectionManager/ConnectionUSB.h | 144 + .../lmsSDR/connectionManager/IConnection.h | 68 + .../LIB/lmsSDR/connectionManager/lmsComms.cpp | 325 ++ .../LIB/lmsSDR/connectionManager/lmsComms.h | 111 + .../LMSSDR/USERSPACE/LIB/lmsSDR/dataTypes.h | 33 + .../ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/fifo.h | 180 ++ .../LMSSDR/USERSPACE/LIB/lmsSDR/ringBuffer.h | 143 + targets/ARCH/LMSSDR/USERSPACE/LIB/lms_lib.cpp | 862 ++++++ 77 files changed, 13879 insertions(+), 2021 deletions(-) delete mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeCache.txt delete mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CMakeCCompiler.cmake delete mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CMakeCXXCompiler.cmake delete mode 100755 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CMakeDetermineCompilerABI_C.bin delete mode 100755 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CMakeDetermineCompilerABI_CXX.bin delete mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CMakeSystem.cmake delete mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CompilerIdC/CMakeCCompilerId.c delete mode 100755 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CompilerIdC/a.out delete mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CompilerIdCXX/CMakeCXXCompilerId.cpp delete mode 100755 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CompilerIdCXX/a.out delete mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeDirectoryInformation.cmake delete mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeOutput.log delete mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Makefile.cmake delete mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Makefile2 delete mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/CXX.includecache delete mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/DependInfo.cmake delete mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/Si5351C.o delete mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/build.make delete mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/cmake_clean.cmake delete mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/cmake_clean_target.cmake delete mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/depend.internal delete mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/depend.make delete mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/flags.make delete mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/link.txt delete mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/progress.make delete mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/TargetDirectories.txt delete mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/cmake.check_cache delete mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/progress.marks delete mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/Makefile delete mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/cmake_install.cmake delete mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/libSi5351C.a create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/CMakeLists.txt create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/LMS7002M.cpp create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/LMS7002M.h create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/LMS7002M_RegistersMap.cpp create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/LMS7002M_RegistersMap.h create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/LMS7002M_filtersCalibration.cpp create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/LMS7002M_parameters.cpp create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/LMS7002M_parameters.h create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/LMS7002M_statuses.cpp create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/LMS7002M_statuses.h create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/connectionManager/ConnectionCOM.cpp create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/connectionManager/ConnectionCOM.h create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/connectionManager/ConnectionManager.cpp create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/connectionManager/ConnectionManager.h create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/connectionManager/ConnectionSPI.cpp create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/connectionManager/ConnectionSPI.h create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/connectionManager/ConnectionUSB.cpp create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/connectionManager/ConnectionUSB.h create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/connectionManager/IConnection.h create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/lms7002_defines.h create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/lmsComms.cpp create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/lmsComms.h create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/typedefs.h create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/LMS_SDR.cpp create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/LMS_SDR.h create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/LMS_StreamBoard/CMakeLists.txt create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/LMS_StreamBoard/LMS_StreamBoard.cpp create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/LMS_StreamBoard/LMS_StreamBoard.h create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/LMS_StreamBoard/LMS_StreamBoard_FIFO.h create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/LMS_StreamBoard/lms7002_defines.h create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/CMakeLists.txt create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/ConnectionCOM.cpp create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/ConnectionCOM.h create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/ConnectionManager.cpp create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/ConnectionManager.h create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/ConnectionSPI.cpp create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/ConnectionSPI.h create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/ConnectionUSB.cpp create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/ConnectionUSB.h create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/IConnection.h create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/lmsComms.cpp create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/lmsComms.h create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/dataTypes.h create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/fifo.h create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/ringBuffer.h create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lms_lib.cpp diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeCache.txt b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeCache.txt deleted file mode 100644 index 2bd212843c..0000000000 --- a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeCache.txt +++ /dev/null @@ -1,326 +0,0 @@ -# This is the CMakeCache file. -# For build in directory: /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build -# It was generated by CMake: /usr/bin/cmake -# You can edit this file to change values found and used by cmake. -# If you do not want to change any of the values, simply exit the editor. -# If you do want to change a value, simply edit, save, and exit the editor. -# The syntax for the file is as follows: -# KEY:TYPE=VALUE -# KEY is the name of a variable in the cache. -# TYPE is a hint to GUIs for the type of VALUE, DO NOT EDIT TYPE!. -# VALUE is the current value for the KEY. - -######################## -# EXTERNAL cache entries -######################## - -//Path to a program. -CMAKE_AR:FILEPATH=/usr/bin/ar - -//For backwards compatibility, what version of CMake commands and -// syntax should this version of CMake try to support. -CMAKE_BACKWARDS_COMPATIBILITY:STRING=2.4 - -//Choose the type of build, options are: None(CMAKE_CXX_FLAGS or -// CMAKE_C_FLAGS used) Debug Release RelWithDebInfo MinSizeRel. -CMAKE_BUILD_TYPE:STRING= - -//Enable/Disable color output during build. -CMAKE_COLOR_MAKEFILE:BOOL=ON - -//CXX compiler. -CMAKE_CXX_COMPILER:FILEPATH=/usr/bin/c++ - -//Flags used by the compiler during all build types. -CMAKE_CXX_FLAGS:STRING= - -//Flags used by the compiler during debug builds. -CMAKE_CXX_FLAGS_DEBUG:STRING=-g - -//Flags used by the compiler during release minsize builds. -CMAKE_CXX_FLAGS_MINSIZEREL:STRING=-Os -DNDEBUG - -//Flags used by the compiler during release builds (/MD /Ob1 /Oi -// /Ot /Oy /Gs will produce slightly less optimized but smaller -// files). -CMAKE_CXX_FLAGS_RELEASE:STRING=-O3 -DNDEBUG - -//Flags used by the compiler during Release with Debug Info builds. -CMAKE_CXX_FLAGS_RELWITHDEBINFO:STRING=-O2 -g -DNDEBUG - -//C compiler. -CMAKE_C_COMPILER:FILEPATH=/usr/bin/cc - -//Flags used by the compiler during all build types. -CMAKE_C_FLAGS:STRING= - -//Flags used by the compiler during debug builds. -CMAKE_C_FLAGS_DEBUG:STRING=-g - -//Flags used by the compiler during release minsize builds. -CMAKE_C_FLAGS_MINSIZEREL:STRING=-Os -DNDEBUG - -//Flags used by the compiler during release builds (/MD /Ob1 /Oi -// /Ot /Oy /Gs will produce slightly less optimized but smaller -// files). -CMAKE_C_FLAGS_RELEASE:STRING=-O3 -DNDEBUG - -//Flags used by the compiler during Release with Debug Info builds. -CMAKE_C_FLAGS_RELWITHDEBINFO:STRING=-O2 -g -DNDEBUG - -//Flags used by the linker. -CMAKE_EXE_LINKER_FLAGS:STRING=' ' - -//Flags used by the linker during debug builds. -CMAKE_EXE_LINKER_FLAGS_DEBUG:STRING= - -//Flags used by the linker during release minsize builds. -CMAKE_EXE_LINKER_FLAGS_MINSIZEREL:STRING= - -//Flags used by the linker during release builds. -CMAKE_EXE_LINKER_FLAGS_RELEASE:STRING= - -//Flags used by the linker during Release with Debug Info builds. -CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO:STRING= - -//Enable/Disable output of compile commands during generation. -CMAKE_EXPORT_COMPILE_COMMANDS:BOOL=OFF - -//Install path prefix, prepended onto install directories. -CMAKE_INSTALL_PREFIX:PATH=/usr/local - -//Path to a program. -CMAKE_LINKER:FILEPATH=/usr/bin/ld - -//Path to a program. -CMAKE_MAKE_PROGRAM:FILEPATH=/usr/bin/make - -//Flags used by the linker during the creation of modules. -CMAKE_MODULE_LINKER_FLAGS:STRING=' ' - -//Flags used by the linker during debug builds. -CMAKE_MODULE_LINKER_FLAGS_DEBUG:STRING= - -//Flags used by the linker during release minsize builds. -CMAKE_MODULE_LINKER_FLAGS_MINSIZEREL:STRING= - -//Flags used by the linker during release builds. -CMAKE_MODULE_LINKER_FLAGS_RELEASE:STRING= - -//Flags used by the linker during Release with Debug Info builds. -CMAKE_MODULE_LINKER_FLAGS_RELWITHDEBINFO:STRING= - -//Path to a program. -CMAKE_NM:FILEPATH=/usr/bin/nm - -//Path to a program. -CMAKE_OBJCOPY:FILEPATH=/usr/bin/objcopy - -//Path to a program. -CMAKE_OBJDUMP:FILEPATH=/usr/bin/objdump - -//Value Computed by CMake -CMAKE_PROJECT_NAME:STATIC=Project - -//Path to a program. -CMAKE_RANLIB:FILEPATH=/usr/bin/ranlib - -//Flags used by the linker during the creation of dll's. -CMAKE_SHARED_LINKER_FLAGS:STRING=' ' - -//Flags used by the linker during debug builds. -CMAKE_SHARED_LINKER_FLAGS_DEBUG:STRING= - -//Flags used by the linker during release minsize builds. -CMAKE_SHARED_LINKER_FLAGS_MINSIZEREL:STRING= - -//Flags used by the linker during release builds. -CMAKE_SHARED_LINKER_FLAGS_RELEASE:STRING= - -//Flags used by the linker during Release with Debug Info builds. -CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO:STRING= - -//If set, runtime paths are not added when installing shared libraries, -// but are added when building. -CMAKE_SKIP_INSTALL_RPATH:BOOL=NO - -//If set, runtime paths are not added when using shared libraries. -CMAKE_SKIP_RPATH:BOOL=NO - -//Flags used by the linker during the creation of static libraries. -CMAKE_STATIC_LINKER_FLAGS:STRING= - -//Flags used by the linker during debug builds. -CMAKE_STATIC_LINKER_FLAGS_DEBUG:STRING= - -//Flags used by the linker during release minsize builds. -CMAKE_STATIC_LINKER_FLAGS_MINSIZEREL:STRING= - -//Flags used by the linker during release builds. -CMAKE_STATIC_LINKER_FLAGS_RELEASE:STRING= - -//Flags used by the linker during Release with Debug Info builds. -CMAKE_STATIC_LINKER_FLAGS_RELWITHDEBINFO:STRING= - -//Path to a program. -CMAKE_STRIP:FILEPATH=/usr/bin/strip - -//If true, cmake will use relative paths in makefiles and projects. -CMAKE_USE_RELATIVE_PATHS:BOOL=OFF - -//If this value is on, makefiles will be generated without the -// .SILENT directive, and all commands will be echoed to the console -// during the make. This is useful for debugging only. With Visual -// Studio IDE projects all commands are done without /nologo. -CMAKE_VERBOSE_MAKEFILE:BOOL=FALSE - -//Single output directory for building all executables. -EXECUTABLE_OUTPUT_PATH:PATH= - -//Single output directory for building all libraries. -LIBRARY_OUTPUT_PATH:PATH= - -//Value Computed by CMake -Project_BINARY_DIR:STATIC=/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build - -//Value Computed by CMake -Project_SOURCE_DIR:STATIC=/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C - -//Dependencies for the target -Si5351C_LIB_DEPENDS:STATIC=general;LMS7002M; - - -######################## -# INTERNAL cache entries -######################## - -//ADVANCED property for variable: CMAKE_AR -CMAKE_AR-ADVANCED:INTERNAL=1 -//ADVANCED property for variable: CMAKE_BUILD_TOOL -CMAKE_BUILD_TOOL-ADVANCED:INTERNAL=1 -//What is the target build tool cmake is generating for. -CMAKE_BUILD_TOOL:INTERNAL=/usr/bin/make -//This is the directory where this CMakeCache.txt was created -CMAKE_CACHEFILE_DIR:INTERNAL=/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build -//Major version of cmake used to create the current loaded cache -CMAKE_CACHE_MAJOR_VERSION:INTERNAL=2 -//Minor version of cmake used to create the current loaded cache -CMAKE_CACHE_MINOR_VERSION:INTERNAL=8 -//Patch version of cmake used to create the current loaded cache -CMAKE_CACHE_PATCH_VERSION:INTERNAL=12 -//ADVANCED property for variable: CMAKE_COLOR_MAKEFILE -CMAKE_COLOR_MAKEFILE-ADVANCED:INTERNAL=1 -//Path to CMake executable. -CMAKE_COMMAND:INTERNAL=/usr/bin/cmake -//Path to cpack program executable. -CMAKE_CPACK_COMMAND:INTERNAL=/usr/bin/cpack -//Path to ctest program executable. -CMAKE_CTEST_COMMAND:INTERNAL=/usr/bin/ctest -//ADVANCED property for variable: CMAKE_CXX_COMPILER -CMAKE_CXX_COMPILER-ADVANCED:INTERNAL=1 -//ADVANCED property for variable: CMAKE_CXX_FLAGS -CMAKE_CXX_FLAGS-ADVANCED:INTERNAL=1 -//ADVANCED property for variable: CMAKE_CXX_FLAGS_DEBUG -CMAKE_CXX_FLAGS_DEBUG-ADVANCED:INTERNAL=1 -//ADVANCED property for variable: CMAKE_CXX_FLAGS_MINSIZEREL -CMAKE_CXX_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1 -//ADVANCED property for variable: CMAKE_CXX_FLAGS_RELEASE -CMAKE_CXX_FLAGS_RELEASE-ADVANCED:INTERNAL=1 -//ADVANCED property for variable: CMAKE_CXX_FLAGS_RELWITHDEBINFO -CMAKE_CXX_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1 -//ADVANCED property for variable: CMAKE_C_COMPILER -CMAKE_C_COMPILER-ADVANCED:INTERNAL=1 -//ADVANCED property for variable: CMAKE_C_FLAGS -CMAKE_C_FLAGS-ADVANCED:INTERNAL=1 -//ADVANCED property for variable: CMAKE_C_FLAGS_DEBUG -CMAKE_C_FLAGS_DEBUG-ADVANCED:INTERNAL=1 -//ADVANCED property for variable: CMAKE_C_FLAGS_MINSIZEREL -CMAKE_C_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1 -//ADVANCED property for variable: CMAKE_C_FLAGS_RELEASE -CMAKE_C_FLAGS_RELEASE-ADVANCED:INTERNAL=1 -//ADVANCED property for variable: CMAKE_C_FLAGS_RELWITHDEBINFO -CMAKE_C_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1 -//Path to cache edit program executable. -CMAKE_EDIT_COMMAND:INTERNAL=/usr/bin/ccmake -//Executable file format -CMAKE_EXECUTABLE_FORMAT:INTERNAL=ELF -//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS -CMAKE_EXE_LINKER_FLAGS-ADVANCED:INTERNAL=1 -//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS_DEBUG -CMAKE_EXE_LINKER_FLAGS_DEBUG-ADVANCED:INTERNAL=1 -//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS_MINSIZEREL -CMAKE_EXE_LINKER_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1 -//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS_RELEASE -CMAKE_EXE_LINKER_FLAGS_RELEASE-ADVANCED:INTERNAL=1 -//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO -CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1 -//ADVANCED property for variable: CMAKE_EXPORT_COMPILE_COMMANDS -CMAKE_EXPORT_COMPILE_COMMANDS-ADVANCED:INTERNAL=1 -//Name of generator. -CMAKE_GENERATOR:INTERNAL=Unix Makefiles -//Name of generator toolset. -CMAKE_GENERATOR_TOOLSET:INTERNAL= -//Start directory with the top level CMakeLists.txt file for this -// project -CMAKE_HOME_DIRECTORY:INTERNAL=/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C -//Install .so files without execute permission. -CMAKE_INSTALL_SO_NO_EXE:INTERNAL=1 -//ADVANCED property for variable: CMAKE_LINKER -CMAKE_LINKER-ADVANCED:INTERNAL=1 -//ADVANCED property for variable: CMAKE_MAKE_PROGRAM -CMAKE_MAKE_PROGRAM-ADVANCED:INTERNAL=1 -//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS -CMAKE_MODULE_LINKER_FLAGS-ADVANCED:INTERNAL=1 -//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS_DEBUG -CMAKE_MODULE_LINKER_FLAGS_DEBUG-ADVANCED:INTERNAL=1 -//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS_MINSIZEREL -CMAKE_MODULE_LINKER_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1 -//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS_RELEASE -CMAKE_MODULE_LINKER_FLAGS_RELEASE-ADVANCED:INTERNAL=1 -//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS_RELWITHDEBINFO -CMAKE_MODULE_LINKER_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1 -//ADVANCED property for variable: CMAKE_NM -CMAKE_NM-ADVANCED:INTERNAL=1 -//number of local generators -CMAKE_NUMBER_OF_LOCAL_GENERATORS:INTERNAL=1 -//ADVANCED property for variable: CMAKE_OBJCOPY -CMAKE_OBJCOPY-ADVANCED:INTERNAL=1 -//ADVANCED property for variable: CMAKE_OBJDUMP -CMAKE_OBJDUMP-ADVANCED:INTERNAL=1 -//ADVANCED property for variable: CMAKE_RANLIB -CMAKE_RANLIB-ADVANCED:INTERNAL=1 -//Path to CMake installation. -CMAKE_ROOT:INTERNAL=/usr/share/cmake-2.8 -//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS -CMAKE_SHARED_LINKER_FLAGS-ADVANCED:INTERNAL=1 -//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS_DEBUG -CMAKE_SHARED_LINKER_FLAGS_DEBUG-ADVANCED:INTERNAL=1 -//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS_MINSIZEREL -CMAKE_SHARED_LINKER_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1 -//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS_RELEASE -CMAKE_SHARED_LINKER_FLAGS_RELEASE-ADVANCED:INTERNAL=1 -//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO -CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1 -//ADVANCED property for variable: CMAKE_SKIP_INSTALL_RPATH -CMAKE_SKIP_INSTALL_RPATH-ADVANCED:INTERNAL=1 -//ADVANCED property for variable: CMAKE_SKIP_RPATH -CMAKE_SKIP_RPATH-ADVANCED:INTERNAL=1 -//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS -CMAKE_STATIC_LINKER_FLAGS-ADVANCED:INTERNAL=1 -//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS_DEBUG -CMAKE_STATIC_LINKER_FLAGS_DEBUG-ADVANCED:INTERNAL=1 -//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS_MINSIZEREL -CMAKE_STATIC_LINKER_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1 -//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS_RELEASE -CMAKE_STATIC_LINKER_FLAGS_RELEASE-ADVANCED:INTERNAL=1 -//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS_RELWITHDEBINFO -CMAKE_STATIC_LINKER_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1 -//ADVANCED property for variable: CMAKE_STRIP -CMAKE_STRIP-ADVANCED:INTERNAL=1 -//uname command -CMAKE_UNAME:INTERNAL=/bin/uname -//ADVANCED property for variable: CMAKE_USE_RELATIVE_PATHS -CMAKE_USE_RELATIVE_PATHS-ADVANCED:INTERNAL=1 -//ADVANCED property for variable: CMAKE_VERBOSE_MAKEFILE -CMAKE_VERBOSE_MAKEFILE-ADVANCED:INTERNAL=1 - diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CMakeCCompiler.cmake b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CMakeCCompiler.cmake deleted file mode 100644 index f4a508bee8..0000000000 --- a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CMakeCCompiler.cmake +++ /dev/null @@ -1,56 +0,0 @@ -set(CMAKE_C_COMPILER "/usr/bin/cc") -set(CMAKE_C_COMPILER_ARG1 "") -set(CMAKE_C_COMPILER_ID "GNU") -set(CMAKE_C_COMPILER_VERSION "4.8.4") -set(CMAKE_C_PLATFORM_ID "Linux") - -set(CMAKE_AR "/usr/bin/ar") -set(CMAKE_RANLIB "/usr/bin/ranlib") -set(CMAKE_LINKER "/usr/bin/ld") -set(CMAKE_COMPILER_IS_GNUCC 1) -set(CMAKE_C_COMPILER_LOADED 1) -set(CMAKE_C_COMPILER_WORKS TRUE) -set(CMAKE_C_ABI_COMPILED TRUE) -set(CMAKE_COMPILER_IS_MINGW ) -set(CMAKE_COMPILER_IS_CYGWIN ) -if(CMAKE_COMPILER_IS_CYGWIN) - set(CYGWIN 1) - set(UNIX 1) -endif() - -set(CMAKE_C_COMPILER_ENV_VAR "CC") - -if(CMAKE_COMPILER_IS_MINGW) - set(MINGW 1) -endif() -set(CMAKE_C_COMPILER_ID_RUN 1) -set(CMAKE_C_SOURCE_FILE_EXTENSIONS c) -set(CMAKE_C_IGNORE_EXTENSIONS h;H;o;O;obj;OBJ;def;DEF;rc;RC) -set(CMAKE_C_LINKER_PREFERENCE 10) - -# Save compiler ABI information. -set(CMAKE_C_SIZEOF_DATA_PTR "8") -set(CMAKE_C_COMPILER_ABI "ELF") -set(CMAKE_C_LIBRARY_ARCHITECTURE "x86_64-linux-gnu") - -if(CMAKE_C_SIZEOF_DATA_PTR) - set(CMAKE_SIZEOF_VOID_P "${CMAKE_C_SIZEOF_DATA_PTR}") -endif() - -if(CMAKE_C_COMPILER_ABI) - set(CMAKE_INTERNAL_PLATFORM_ABI "${CMAKE_C_COMPILER_ABI}") -endif() - -if(CMAKE_C_LIBRARY_ARCHITECTURE) - set(CMAKE_LIBRARY_ARCHITECTURE "x86_64-linux-gnu") -endif() - - - - -set(CMAKE_C_IMPLICIT_LINK_LIBRARIES "c") -set(CMAKE_C_IMPLICIT_LINK_DIRECTORIES "/usr/lib/gcc/x86_64-linux-gnu/4.8;/usr/lib/x86_64-linux-gnu;/usr/lib;/lib/x86_64-linux-gnu;/lib") -set(CMAKE_C_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES "") - - - diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CMakeCXXCompiler.cmake b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CMakeCXXCompiler.cmake deleted file mode 100644 index 1ca40dbcd6..0000000000 --- a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CMakeCXXCompiler.cmake +++ /dev/null @@ -1,57 +0,0 @@ -set(CMAKE_CXX_COMPILER "/usr/bin/c++") -set(CMAKE_CXX_COMPILER_ARG1 "") -set(CMAKE_CXX_COMPILER_ID "GNU") -set(CMAKE_CXX_COMPILER_VERSION "4.8.4") -set(CMAKE_CXX_PLATFORM_ID "Linux") - -set(CMAKE_AR "/usr/bin/ar") -set(CMAKE_RANLIB "/usr/bin/ranlib") -set(CMAKE_LINKER "/usr/bin/ld") -set(CMAKE_COMPILER_IS_GNUCXX 1) -set(CMAKE_CXX_COMPILER_LOADED 1) -set(CMAKE_CXX_COMPILER_WORKS TRUE) -set(CMAKE_CXX_ABI_COMPILED TRUE) -set(CMAKE_COMPILER_IS_MINGW ) -set(CMAKE_COMPILER_IS_CYGWIN ) -if(CMAKE_COMPILER_IS_CYGWIN) - set(CYGWIN 1) - set(UNIX 1) -endif() - -set(CMAKE_CXX_COMPILER_ENV_VAR "CXX") - -if(CMAKE_COMPILER_IS_MINGW) - set(MINGW 1) -endif() -set(CMAKE_CXX_COMPILER_ID_RUN 1) -set(CMAKE_CXX_IGNORE_EXTENSIONS inl;h;hpp;HPP;H;o;O;obj;OBJ;def;DEF;rc;RC) -set(CMAKE_CXX_SOURCE_FILE_EXTENSIONS C;M;c++;cc;cpp;cxx;m;mm;CPP) -set(CMAKE_CXX_LINKER_PREFERENCE 30) -set(CMAKE_CXX_LINKER_PREFERENCE_PROPAGATES 1) - -# Save compiler ABI information. -set(CMAKE_CXX_SIZEOF_DATA_PTR "8") -set(CMAKE_CXX_COMPILER_ABI "ELF") -set(CMAKE_CXX_LIBRARY_ARCHITECTURE "x86_64-linux-gnu") - -if(CMAKE_CXX_SIZEOF_DATA_PTR) - set(CMAKE_SIZEOF_VOID_P "${CMAKE_CXX_SIZEOF_DATA_PTR}") -endif() - -if(CMAKE_CXX_COMPILER_ABI) - set(CMAKE_INTERNAL_PLATFORM_ABI "${CMAKE_CXX_COMPILER_ABI}") -endif() - -if(CMAKE_CXX_LIBRARY_ARCHITECTURE) - set(CMAKE_LIBRARY_ARCHITECTURE "x86_64-linux-gnu") -endif() - - - - -set(CMAKE_CXX_IMPLICIT_LINK_LIBRARIES "stdc++;m;c") -set(CMAKE_CXX_IMPLICIT_LINK_DIRECTORIES "/usr/lib/gcc/x86_64-linux-gnu/4.8;/usr/lib/x86_64-linux-gnu;/usr/lib;/lib/x86_64-linux-gnu;/lib") -set(CMAKE_CXX_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES "") - - - diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CMakeDetermineCompilerABI_C.bin b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CMakeDetermineCompilerABI_C.bin deleted file mode 100755 index 3458fc29190dbceb43a4fb44955cbce374660b02..0000000000000000000000000000000000000000 GIT binary patch literal 0 HcmV?d00001 literal 8587 zcmeHMeQZAT{-bS~SDQ*aX8BoV_62l85z-ZELW9f?%JH)MHGy9pZ zK^rXv)oSU`Hf;=5Ra^BBGm> z{PK|4rtL4T<#*2c-E;0a_rCk_?!Ax4y4HC;9>K{gzAQ*OT%$?IdP1HpMTJE~ozTQ0 zu|U)Ssm5QEIYcdv>7*)}sbA^&K&$YNcr75})g;4op#=-393fHiS5BH@E&6PoB{CHv zBmuIcSc3s6g7!;>X`_mxSy8qlk?b0kU8AyNdRhg>l1z>ea))f7~UTa~|?waYbCKc-3)_oY(e~PG>vP}T zH*@t5XS}@e+{B-Mf9|=KfiqX%{^nN~KJxg{eZM?(Juq|b+2_U^s>d(?@jdl6VeCjv zkV6iP#2NU{altddLN54EZh{}b3I289LD3*0!G3V%6bDOqqXU0d;&%znfe!)?x#;f) zK3miaP4y%0H%|kfBW8(-S`C~KN%<6FJ1F5i4=7l?046BznieO$SJL0F%2}ffejxD~ zB2uF%#3FY~e3ocd@u*=UI)PK1TNM6jW%UKA9}ukySFjN1hlAAZRtm!)-pHHroN0{2 zQyE4E^95rll}QPsv!~lgBy-8_sl1uY^>nwVvzcU1d?1|^smxH;$fx!uvqMH=hnW*b zG7&f9D1(SqDunGL*^F{wpuElC6RC_*$R`tackpJSgbaZL`8=C%*lBE4&fC-Rd_I}C zVsedWeOG5&yU`ME39qnf%WdSr$a4SDn4_OHF374dKZRl96=$p>#AJQHcKm7ZUn`3A6gbawzL#ulY}qRXLSbya<)jJul%|zgPoD z@-Qh}e5ZtT&ry;oYmg3o0A0?|B4j#1Alorg?7fppQxA)Z$Rt@NvPWN5>7EJ0Fi;H72`asvc z=a-$)kALi=H+CWRNvWhCxN0t9`>x`puHuIsD5Es@FZ$RCkG|@1;S#;bZGF*iMEjx- zM~xFhLt)l`AMaPbd-bY46}?4>&Q0q!ueJ@NZOxHB3ycq>w&7!=4}EljZ%s2|ug3q% z$EDIf(1i%B3$zZ+@)Bql=xd$JL zK_z#6A(kMY^oOBOF^E8LU7%q@{fu4yQL%RZnx)H^e3oF+>A=4aaml$X8VDZrw$G~B z3CAig0XmBOB&cW$1i#~r1sb05#R8#2Rk1+h)75&Q`CyG6h>X>C2efn`5)Cv*1C4Eg zP+On@`fUNftk=shKZbJb3;?#HD zEG6^z*Rz^xR-%{fIe|}QRl6=Ig5t-WaO;lMjeZNqe^lC)J z9r7u}yNc5HI;94S2>y;#V)@$#p97S5?v-l-WL`gNWv&o+D(bJ%B**x*YD?z0*&ppq zD6x#`UDoHc(#NtUWp2-FN zqivl{W_-Jnwr2|AfkFy<&{RT%Ng9slhebHCCxh}ViVu02voo2?r?Qy}!9ZRvnU0fz z;&!A>5tbkCVKccKyxcd0b6L3;2q%Y)p_Ii&Y{v2O>O}9T`bxOlKSaCo+vQ>QmgGBVG+s`J9EvnFR6R{>Sp?z);_2 z`yQ_bseFzRl2Z9mRc0l(3{Shg>D44|ssfitsr+!-cOdISj0N_8#H&f=BMRu3Qh7e$ zai?Ih2@H*Wwx9HBkZ7KeM7*vlO!Eh^Y|rELL147cVSAo$CRCvBBF~7AS zkLP3bv5WM1i%iXDtjF|GIrJL6Zd*b9b2WqY2Vt|@!2rxK^t{|SdZ z&v$+`;qv@Q_Ou2#+wU1*)Fw)OYJG?(faiUv$fTN;MNtH2x9_jfWM03+KN|!U!}R-* z?e=_raah^E=y+jl$K@S$*z*e_q*h`}28=rtFuqp`uRz#~k*2?#JhW ztqyyq|5qIL$FOarbWHjGKuYC@f~SB9aCA6EV}KH`-+Vsk)OX5nz@{F5w&(S|feJ-( z>O1APp+m2T?P=#sDRhhWe}yi+YPRR~jn8lSoK|&*sd)H3{2jJ-|9oCDNtHr!#>+C( z%h0jg3-x^=4=Rz@NQKxE+cBm0W4GsXzeW`x$H_&o9m^kqA&l!!#~qX+%FwA#zU-+4 zfv{#f2%hb`9XQ)FrE3EAZC5?O{#j9FIz;K4$Bx}Ts6Hs0)r-3unG_?}hvzjKpKkuO z#a3w>9fdpnTUzcp>-chv0d>5}$rQ6r}w)9=jZDl#-^XSTQf>ZY$mH2GT zW11b3ybmYOJWts(ed1G7`-@6^F6NVdJ0y7@b_qOR*fV`%-qg8iC5~MIk8fLs&*l7` zvVAV+<`(W;6|FH?C9czOtVp!xdayfj#!th;D{zjl)=M@DEBu-Rk1E``&wB{C#}+4# zk0FUqZ_h)joGrB)xN`atSdYtl83*oGFIqP|SUKpJlaiY5fw}9y1>A$1f+KYrxNHTD$Y^dq|@Lp98&%@Fk9xEh1z5i?kPWLFz zdy#FxLu_oLyCgpSe(2l4-R@Do2i)zR=_v3yXm$SHVHeL!oTV~-Rh7f*6X(1EJj8;H zo&oN5|8xns+x^o=!0DbzbF_a+>GO9TyQsmu?shLV2e{k4)SbZH;{4)G@R%&eWj-9t znR&B-6Y@b^^=xS0YIJoz&|?^)e9dH-BgPFhu}Z6wTWE^ovO zy9IWHJJLxrnFz03^`+$~*+og-X<0i>+%%cFJ;K_XCJG}XdthRd4BFCGsJ3^uh&&H@&#CuKb*rf|_Q( YSNpGT_qcN9OFrx7@!z`XldUEG1u+4vi~s-t diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CMakeDetermineCompilerABI_CXX.bin b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CMakeDetermineCompilerABI_CXX.bin deleted file mode 100755 index ea701432becf6a6bd7cb452c08f7c7645d0f8607..0000000000000000000000000000000000000000 GIT binary patch literal 0 HcmV?d00001 literal 8600 zcmeHMeQZH?|!^{&+{FjPN%~GoSg7=Aa0;c5s>i&II=*n67xePD6kBc zKp7&X_*X;;Q6tB6R+?s7A>~|1OYrY^8i3!ahz!%E1`JHOhD6C{d=XoUZ;W_@d^=W7taDE zSxTEP=n=}dOGE7y3c<)5v_)_LOj++q)T4UdYw}3J9_jCH{c=sVkEvwg@px>owdL`6 zq#+(lWX2oD{jCkHExvTp*DTsi_DOdA#y;VR`>_@|s&ftgX$(;Lsz112xwG!!%`@9i zpWL2qe)9TfAD^Q#Y7gm^Wd3(bK%p{v)#RtGy?XhNf0u6(6>U-jVqP13 z9%2h^@P5R+Hux)d!QZ$G-i5daYQgUrz+541#w_9W7W|OF7lC5Idl2{9$j1?10M+1; zMC48Vvk%&Q#Ao0MWIrXIXO7h*(&RVH;P~h{xW3ls) zlm}TKIZfbUfxDqZ;?fKNj<+EiUag>Ml-JUFIHhZ&;aGx^p>#$YjwNECb@g^@k!UKq zE0)%ysow5jJei30h6m$O(4vvB9!3=+h7n|TjV2S)qK4|5FdvB}v`ji0F%*D!1-eLGkU-%F~&O~nZ+?2 z{!VzuD2CbU0goUD@|`s@ZeubO1b({vAdg>I7mziIn;LYLcx^{qLPhiFR)CQUd>g23j&0cuc*?-~~IiL#N?0<`j za%ZdS4iI*XIF>&?>q2=o`#bgcr6*L!8TGx{3@ZPM1l5D@qq3SkY3QGm`UloEVSOR9 zpbs@?_G3l*PnIr2$Z_KYwNIT~H(Q1R`m%f#YWm*t;x2&lxikG2pF@@EI=GldN;b0J zzM^I`XHRw9Ca;G&uBb<=-#p;OMpyrK+R<^FkyR$-c0c-hf#f0ZR3MuRZ0*Y43iNel zKM3@O4zC!&3iPRm8;EWRJ#wMx6ZQBV7rm*O?$2{M_25-~8S96#mqOWF?Pw!c^A~mU zghO3@Idh3#;Ew*l(}DiL&VY7ec-Y7CH}JiRcP?MCqiB=>bZzY1v?d+f8%+*tkug2B zqtV}QfZ@T|4*Yn)1<4sql4Ce zN{+of;28HfmQjhaR8oJ zy!O$R%fCV}$+Y9YAL}L7rhwb?qBA(ZY!5n?Wf7zYusn(s+T5P+IXm37FS$D0-oqsw z?)vYRs_w=Y%T%|2vb@`^#NGaYyD{LdZ*zOw+_fm*=B^O!dL7lL(2jY&k;(h%eh=L5 zf%`r1|J(y!+>b?KDl1DHIwhu62Alt`n=g6(Zd=6V^1QS}^0d}cT5J%gmF2WPQ{wV} ze4a}Zf7GcE$)EYAN(`R9b12O^6(aC}cmjMVDSfX~sx=6FK~g69Zyx-7pu}sn*h7%# z{f54qD1FHwaJEztImS;*p6kv2RGz0k3 z6Qg=~5UHLr=m_Ux3H*W|179MkM}2{|t_D54OLDss8Q)+ghG)=N1boDegwrG7i%cZY zo);b#`93{5j(KsO@THRC(BO-XXv3-SXjB`C zpe}QUh89kx!V`uD=XVdG7+MdH#)i;!5)I#mA{4*#+YX$SXUQ9^^FB!pP zt-pZ+?8OXKmGyajIxY3No$TM*{ueCzyxyIa3cNlNOM8G-|0TqzPk4RibH7IdyzZlj zNU~d*g)HXG`i*6ZC~K7Z?4K1pGQ;!-$eZ=~{$fDt|HSgbSdZ&m`n!PX^4_EVrzlIWn)P{qImKuf0T3_awUPc+SKFIG2aZ!n7^<>19SdS^aAG1E+`_;<| zay{7u>oNZsW(ec<)Aa}?zf`o!lP`11AwyWB8N@v6cUy4QXG&oL_H7nD$o^SS7Ft;0 zo9B*M-y=ULc^!BN3u&+6_VBt!^V811QfFA(W-)H{Z%ElcU06H6Q<+of!qv9d7I%Se ziz&| zSbpw(u_14BpDXMX?xTzCc=GX%VtfIvV~QCPc^BS1^EzcNbisr9^F=XUgX_tF84`IH zo)UPyFc-Sui~0N2VjNEeJiko^E}Q#zDt6i2n;W=wS2X5e30$Y?Sd?hbb>Qj5T7Q}z zPQZJ7xnHu9PvX-SJRor>S6Ecgr|{`8)syGPu)yc`=V8Rjuh(Md$3lMYdpU-8uh8u|C0@oR5cdkC`0+!5&y5?s zhPYjv>1T*9#NOra9k%v!fiqX2?@BwoKXJ*Q5%)4>*8Z%M^47T2a>VWGN%3eqyhqrvSr3O&dRoumjrtJAgf;|wv{2WUUQL5S z_({`8wIK>XrGW!NCI|yjNo`j=IT(&>5j~koYvIf|;E8Z79@V1}U+e0xtwhT zoHQ{crKcvqIGaW?qoWh3V&XJ9(iVvZyTi{!gWI+R(NQcOP2tJfH#9Z|+V)UWYb-IG z)J&KDg!%=Dm;PwEvnSBqp>=F*$95Wx=6sPKijqarNo^#Yh*0FM{hJ#D-CaRMO=2R9 zhY$wo*y8%ornW#x+tk^)rK4Bt4YY+i$d8En-BXOu9NLrNJ|iw@jT|b9IU4t0#{{`8 Qh0vf8p8U7sgQ9cbUvrV1<^TWy diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CMakeSystem.cmake b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CMakeSystem.cmake deleted file mode 100644 index bbcd260466..0000000000 --- a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CMakeSystem.cmake +++ /dev/null @@ -1,15 +0,0 @@ -set(CMAKE_HOST_SYSTEM "Linux-3.17.0-031700-lowlatency") -set(CMAKE_HOST_SYSTEM_NAME "Linux") -set(CMAKE_HOST_SYSTEM_VERSION "3.17.0-031700-lowlatency") -set(CMAKE_HOST_SYSTEM_PROCESSOR "x86_64") - - - -set(CMAKE_SYSTEM "Linux-3.17.0-031700-lowlatency") -set(CMAKE_SYSTEM_NAME "Linux") -set(CMAKE_SYSTEM_VERSION "3.17.0-031700-lowlatency") -set(CMAKE_SYSTEM_PROCESSOR "x86_64") - -set(CMAKE_CROSSCOMPILING "FALSE") - -set(CMAKE_SYSTEM_LOADED 1) diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CompilerIdC/CMakeCCompilerId.c b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CompilerIdC/CMakeCCompilerId.c deleted file mode 100644 index cba81d4a6b..0000000000 --- a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CompilerIdC/CMakeCCompilerId.c +++ /dev/null @@ -1,389 +0,0 @@ -#ifdef __cplusplus -# error "A C++ compiler has been selected for C." -#endif - -/* Version number components: V=Version, R=Revision, P=Patch - Version date components: YYYY=Year, MM=Month, DD=Day */ - -#if defined(__18CXX) -# define ID_VOID_MAIN -#endif - -#if defined(__INTEL_COMPILER) || defined(__ICC) -# define COMPILER_ID "Intel" - /* __INTEL_COMPILER = VRP */ -# define COMPILER_VERSION_MAJOR DEC(__INTEL_COMPILER/100) -# define COMPILER_VERSION_MINOR DEC(__INTEL_COMPILER/10 % 10) -# define COMPILER_VERSION_PATCH DEC(__INTEL_COMPILER % 10) -# if defined(__INTEL_COMPILER_BUILD_DATE) - /* __INTEL_COMPILER_BUILD_DATE = YYYYMMDD */ -# define COMPILER_VERSION_TWEAK DEC(__INTEL_COMPILER_BUILD_DATE) -# endif - -#elif defined(__PATHCC__) -# define COMPILER_ID "PathScale" -# define COMPILER_VERSION_MAJOR DEC(__PATHCC__) -# define COMPILER_VERSION_MINOR DEC(__PATHCC_MINOR__) -# if defined(__PATHCC_PATCHLEVEL__) -# define COMPILER_VERSION_PATCH DEC(__PATHCC_PATCHLEVEL__) -# endif - -#elif defined(__clang__) -# define COMPILER_ID "Clang" -# define COMPILER_VERSION_MAJOR DEC(__clang_major__) -# define COMPILER_VERSION_MINOR DEC(__clang_minor__) -# define COMPILER_VERSION_PATCH DEC(__clang_patchlevel__) - -#elif defined(__BORLANDC__) && defined(__CODEGEARC_VERSION__) -# define COMPILER_ID "Embarcadero" -# define COMPILER_VERSION_MAJOR HEX(__CODEGEARC_VERSION__>>24 & 0x00FF) -# define COMPILER_VERSION_MINOR HEX(__CODEGEARC_VERSION__>>16 & 0x00FF) -# define COMPILER_VERSION_PATCH HEX(__CODEGEARC_VERSION__ & 0xFFFF) - -#elif defined(__BORLANDC__) -# define COMPILER_ID "Borland" - /* __BORLANDC__ = 0xVRR */ -# define COMPILER_VERSION_MAJOR HEX(__BORLANDC__>>8) -# define COMPILER_VERSION_MINOR HEX(__BORLANDC__ & 0xFF) - -#elif defined(__WATCOMC__) -# define COMPILER_ID "Watcom" - /* __WATCOMC__ = VVRR */ -# define COMPILER_VERSION_MAJOR DEC(__WATCOMC__ / 100) -# define COMPILER_VERSION_MINOR DEC(__WATCOMC__ % 100) - -#elif defined(__SUNPRO_C) -# define COMPILER_ID "SunPro" -# if __SUNPRO_C >= 0x5100 - /* __SUNPRO_C = 0xVRRP */ -# define COMPILER_VERSION_MAJOR HEX(__SUNPRO_C>>12) -# define COMPILER_VERSION_MINOR HEX(__SUNPRO_C>>4 & 0xFF) -# define COMPILER_VERSION_PATCH HEX(__SUNPRO_C & 0xF) -# else - /* __SUNPRO_C = 0xVRP */ -# define COMPILER_VERSION_MAJOR HEX(__SUNPRO_C>>8) -# define COMPILER_VERSION_MINOR HEX(__SUNPRO_C>>4 & 0xF) -# define COMPILER_VERSION_PATCH HEX(__SUNPRO_C & 0xF) -# endif - -#elif defined(__HP_cc) -# define COMPILER_ID "HP" - /* __HP_cc = VVRRPP */ -# define COMPILER_VERSION_MAJOR DEC(__HP_cc/10000) -# define COMPILER_VERSION_MINOR DEC(__HP_cc/100 % 100) -# define COMPILER_VERSION_PATCH DEC(__HP_cc % 100) - -#elif defined(__DECC) -# define COMPILER_ID "Compaq" - /* __DECC_VER = VVRRTPPPP */ -# define COMPILER_VERSION_MAJOR DEC(__DECC_VER/10000000) -# define COMPILER_VERSION_MINOR DEC(__DECC_VER/100000 % 100) -# define COMPILER_VERSION_PATCH DEC(__DECC_VER % 10000) - -#elif defined(__IBMC__) -# if defined(__COMPILER_VER__) -# define COMPILER_ID "zOS" -# else -# if __IBMC__ >= 800 -# define COMPILER_ID "XL" -# else -# define COMPILER_ID "VisualAge" -# endif - /* __IBMC__ = VRP */ -# define COMPILER_VERSION_MAJOR DEC(__IBMC__/100) -# define COMPILER_VERSION_MINOR DEC(__IBMC__/10 % 10) -# define COMPILER_VERSION_PATCH DEC(__IBMC__ % 10) -# endif - -#elif defined(__PGI) -# define COMPILER_ID "PGI" -# define COMPILER_VERSION_MAJOR DEC(__PGIC__) -# define COMPILER_VERSION_MINOR DEC(__PGIC_MINOR__) -# if defined(__PGIC_PATCHLEVEL__) -# define COMPILER_VERSION_PATCH DEC(__PGIC_PATCHLEVEL__) -# endif - -#elif defined(_CRAYC) -# define COMPILER_ID "Cray" -# define COMPILER_VERSION_MAJOR DEC(_RELEASE) -# define COMPILER_VERSION_MINOR DEC(_RELEASE_MINOR) - -#elif defined(__TI_COMPILER_VERSION__) -# define COMPILER_ID "TI" - /* __TI_COMPILER_VERSION__ = VVVRRRPPP */ -# define COMPILER_VERSION_MAJOR DEC(__TI_COMPILER_VERSION__/1000000) -# define COMPILER_VERSION_MINOR DEC(__TI_COMPILER_VERSION__/1000 % 1000) -# define COMPILER_VERSION_PATCH DEC(__TI_COMPILER_VERSION__ % 1000) - -#elif defined(__TINYC__) -# define COMPILER_ID "TinyCC" - -#elif defined(__SCO_VERSION__) -# define COMPILER_ID "SCO" - -#elif defined(__GNUC__) -# define COMPILER_ID "GNU" -# define COMPILER_VERSION_MAJOR DEC(__GNUC__) -# define COMPILER_VERSION_MINOR DEC(__GNUC_MINOR__) -# if defined(__GNUC_PATCHLEVEL__) -# define COMPILER_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__) -# endif - -#elif defined(_MSC_VER) -# define COMPILER_ID "MSVC" - /* _MSC_VER = VVRR */ -# define COMPILER_VERSION_MAJOR DEC(_MSC_VER / 100) -# define COMPILER_VERSION_MINOR DEC(_MSC_VER % 100) -# if defined(_MSC_FULL_VER) -# if _MSC_VER >= 1400 - /* _MSC_FULL_VER = VVRRPPPPP */ -# define COMPILER_VERSION_PATCH DEC(_MSC_FULL_VER % 100000) -# else - /* _MSC_FULL_VER = VVRRPPPP */ -# define COMPILER_VERSION_PATCH DEC(_MSC_FULL_VER % 10000) -# endif -# endif -# if defined(_MSC_BUILD) -# define COMPILER_VERSION_TWEAK DEC(_MSC_BUILD) -# endif - -/* Analog VisualDSP++ >= 4.5.6 */ -#elif defined(__VISUALDSPVERSION__) -# define COMPILER_ID "ADSP" - /* __VISUALDSPVERSION__ = 0xVVRRPP00 */ -# define COMPILER_VERSION_MAJOR HEX(__VISUALDSPVERSION__>>24) -# define COMPILER_VERSION_MINOR HEX(__VISUALDSPVERSION__>>16 & 0xFF) -# define COMPILER_VERSION_PATCH HEX(__VISUALDSPVERSION__>>8 & 0xFF) - -/* Analog VisualDSP++ < 4.5.6 */ -#elif defined(__ADSPBLACKFIN__) || defined(__ADSPTS__) || defined(__ADSP21000__) -# define COMPILER_ID "ADSP" - -/* IAR Systems compiler for embedded systems. - http://www.iar.com */ -#elif defined(__IAR_SYSTEMS_ICC__ ) || defined(__IAR_SYSTEMS_ICC) -# define COMPILER_ID "IAR" - -/* sdcc, the small devices C compiler for embedded systems, - http://sdcc.sourceforge.net */ -#elif defined(SDCC) -# define COMPILER_ID "SDCC" - /* SDCC = VRP */ -# define COMPILER_VERSION_MAJOR DEC(SDCC/100) -# define COMPILER_VERSION_MINOR DEC(SDCC/10 % 10) -# define COMPILER_VERSION_PATCH DEC(SDCC % 10) - -#elif defined(_SGI_COMPILER_VERSION) || defined(_COMPILER_VERSION) -# define COMPILER_ID "MIPSpro" -# if defined(_SGI_COMPILER_VERSION) - /* _SGI_COMPILER_VERSION = VRP */ -# define COMPILER_VERSION_MAJOR DEC(_SGI_COMPILER_VERSION/100) -# define COMPILER_VERSION_MINOR DEC(_SGI_COMPILER_VERSION/10 % 10) -# define COMPILER_VERSION_PATCH DEC(_SGI_COMPILER_VERSION % 10) -# else - /* _COMPILER_VERSION = VRP */ -# define COMPILER_VERSION_MAJOR DEC(_COMPILER_VERSION/100) -# define COMPILER_VERSION_MINOR DEC(_COMPILER_VERSION/10 % 10) -# define COMPILER_VERSION_PATCH DEC(_COMPILER_VERSION % 10) -# endif - -/* This compiler is either not known or is too old to define an - identification macro. Try to identify the platform and guess that - it is the native compiler. */ -#elif defined(__sgi) -# define COMPILER_ID "MIPSpro" - -#elif defined(__hpux) || defined(__hpua) -# define COMPILER_ID "HP" - -#else /* unknown compiler */ -# define COMPILER_ID "" - -#endif - -/* Construct the string literal in pieces to prevent the source from - getting matched. Store it in a pointer rather than an array - because some compilers will just produce instructions to fill the - array rather than assigning a pointer to a static array. */ -char const* info_compiler = "INFO" ":" "compiler[" COMPILER_ID "]"; - -/* Identify known platforms by name. */ -#if defined(__linux) || defined(__linux__) || defined(linux) -# define PLATFORM_ID "Linux" - -#elif defined(__CYGWIN__) -# define PLATFORM_ID "Cygwin" - -#elif defined(__MINGW32__) -# define PLATFORM_ID "MinGW" - -#elif defined(__APPLE__) -# define PLATFORM_ID "Darwin" - -#elif defined(_WIN32) || defined(__WIN32__) || defined(WIN32) -# define PLATFORM_ID "Windows" - -#elif defined(__FreeBSD__) || defined(__FreeBSD) -# define PLATFORM_ID "FreeBSD" - -#elif defined(__NetBSD__) || defined(__NetBSD) -# define PLATFORM_ID "NetBSD" - -#elif defined(__OpenBSD__) || defined(__OPENBSD) -# define PLATFORM_ID "OpenBSD" - -#elif defined(__sun) || defined(sun) -# define PLATFORM_ID "SunOS" - -#elif defined(_AIX) || defined(__AIX) || defined(__AIX__) || defined(__aix) || defined(__aix__) -# define PLATFORM_ID "AIX" - -#elif defined(__sgi) || defined(__sgi__) || defined(_SGI) -# define PLATFORM_ID "IRIX" - -#elif defined(__hpux) || defined(__hpux__) -# define PLATFORM_ID "HP-UX" - -#elif defined(__HAIKU__) -# define PLATFORM_ID "Haiku" - -#elif defined(__BeOS) || defined(__BEOS__) || defined(_BEOS) -# define PLATFORM_ID "BeOS" - -#elif defined(__QNX__) || defined(__QNXNTO__) -# define PLATFORM_ID "QNX" - -#elif defined(__tru64) || defined(_tru64) || defined(__TRU64__) -# define PLATFORM_ID "Tru64" - -#elif defined(__riscos) || defined(__riscos__) -# define PLATFORM_ID "RISCos" - -#elif defined(__sinix) || defined(__sinix__) || defined(__SINIX__) -# define PLATFORM_ID "SINIX" - -#elif defined(__UNIX_SV__) -# define PLATFORM_ID "UNIX_SV" - -#elif defined(__bsdos__) -# define PLATFORM_ID "BSDOS" - -#elif defined(_MPRAS) || defined(MPRAS) -# define PLATFORM_ID "MP-RAS" - -#elif defined(__osf) || defined(__osf__) -# define PLATFORM_ID "OSF1" - -#elif defined(_SCO_SV) || defined(SCO_SV) || defined(sco_sv) -# define PLATFORM_ID "SCO_SV" - -#elif defined(__ultrix) || defined(__ultrix__) || defined(_ULTRIX) -# define PLATFORM_ID "ULTRIX" - -#elif defined(__XENIX__) || defined(_XENIX) || defined(XENIX) -# define PLATFORM_ID "Xenix" - -#else /* unknown platform */ -# define PLATFORM_ID "" - -#endif - -/* For windows compilers MSVC and Intel we can determine - the architecture of the compiler being used. This is because - the compilers do not have flags that can change the architecture, - but rather depend on which compiler is being used -*/ -#if defined(_WIN32) && defined(_MSC_VER) -# if defined(_M_IA64) -# define ARCHITECTURE_ID "IA64" - -# elif defined(_M_X64) || defined(_M_AMD64) -# define ARCHITECTURE_ID "x64" - -# elif defined(_M_IX86) -# define ARCHITECTURE_ID "X86" - -# elif defined(_M_ARM) -# define ARCHITECTURE_ID "ARM" - -# elif defined(_M_MIPS) -# define ARCHITECTURE_ID "MIPS" - -# elif defined(_M_SH) -# define ARCHITECTURE_ID "SHx" - -# else /* unknown architecture */ -# define ARCHITECTURE_ID "" -# endif - -#else -# define ARCHITECTURE_ID "" -#endif - -/* Convert integer to decimal digit literals. */ -#define DEC(n) \ - ('0' + (((n) / 10000000)%10)), \ - ('0' + (((n) / 1000000)%10)), \ - ('0' + (((n) / 100000)%10)), \ - ('0' + (((n) / 10000)%10)), \ - ('0' + (((n) / 1000)%10)), \ - ('0' + (((n) / 100)%10)), \ - ('0' + (((n) / 10)%10)), \ - ('0' + ((n) % 10)) - -/* Convert integer to hex digit literals. */ -#define HEX(n) \ - ('0' + ((n)>>28 & 0xF)), \ - ('0' + ((n)>>24 & 0xF)), \ - ('0' + ((n)>>20 & 0xF)), \ - ('0' + ((n)>>16 & 0xF)), \ - ('0' + ((n)>>12 & 0xF)), \ - ('0' + ((n)>>8 & 0xF)), \ - ('0' + ((n)>>4 & 0xF)), \ - ('0' + ((n) & 0xF)) - -/* Construct a string literal encoding the version number components. */ -#ifdef COMPILER_VERSION_MAJOR -char const info_version[] = { - 'I', 'N', 'F', 'O', ':', - 'c','o','m','p','i','l','e','r','_','v','e','r','s','i','o','n','[', - COMPILER_VERSION_MAJOR, -# ifdef COMPILER_VERSION_MINOR - '.', COMPILER_VERSION_MINOR, -# ifdef COMPILER_VERSION_PATCH - '.', COMPILER_VERSION_PATCH, -# ifdef COMPILER_VERSION_TWEAK - '.', COMPILER_VERSION_TWEAK, -# endif -# endif -# endif - ']','\0'}; -#endif - -/* Construct the string literal in pieces to prevent the source from - getting matched. Store it in a pointer rather than an array - because some compilers will just produce instructions to fill the - array rather than assigning a pointer to a static array. */ -char const* info_platform = "INFO" ":" "platform[" PLATFORM_ID "]"; -char const* info_arch = "INFO" ":" "arch[" ARCHITECTURE_ID "]"; - - - -/*--------------------------------------------------------------------------*/ - -#ifdef ID_VOID_MAIN -void main() {} -#else -int main(int argc, char* argv[]) -{ - int require = 0; - require += info_compiler[argc]; - require += info_platform[argc]; - require += info_arch[argc]; -#ifdef COMPILER_VERSION_MAJOR - require += info_version[argc]; -#endif - (void)argv; - return require; -} -#endif diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CompilerIdC/a.out b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CompilerIdC/a.out deleted file mode 100755 index 1d7e438b92300abaac114123c512167b14d7d259..0000000000000000000000000000000000000000 GIT binary patch literal 0 HcmV?d00001 literal 8683 zcmeHMZ){sv6~DIguWf2Op#`^P&C_V5v|79*&5FBe>^X_k=gMhI>a?4>^x27>#LRz+ z{k$auwn}LytgK@a2n7VFACL$V5+6V%;sZ;`w0?j|=`^GvKq?ch`d2DisUqlR&bjZL z`uW906B2yNmEJw~{OIPL+_E3o+lq5<;jVAl5;? zU2GE#0N2CAaw?UWu8?V_O=QLev<{wt(*y!eRTh|j-h>5Hju0vOt0a|*CjCL9$ubo} zkpSvptX{WdfyQKksY-EZL|G46)N3cbcG6?IOo1`w_F>!biITmjQw0ur6^ZDVd4-}Z zro&f^1eOhSDydpUdn6|WQ`Y-3=#dIZ{Ac2&>LK#?uztBi?PE%;cs!jN-P`kcI?<6% zWs6fCQ-Qr5dwcwaoWEPP8||a){)5BP6ZfMJIE;A{JU9lh{$|~&^}CYqzB=)X(_0P? z9$g&T_VXX1EsZzcMm%rmnRqG-$V4WWB}5nd zBjMgYz1!dIe*!F-FV+E3Vw~Kc#jUAzSoawDTJgkW3EvG31qE_o(9SFx_1E@*hBotd(-Lc%wERRjh?IBsK<;T%p@jS-R$jkchO~1x^62vV zGO%5@!=+0nw9<##%-`-Dj)pHTF4wC7*It1@M&7CaEM^2qhCfr_V1TrU7c8>MgD(n`h47en`@*V)b8U~D#YOPhm$Jm-byH;azY zeQkF0qYuGbYvIy>=lm(9K_v^bq5C6C<8KC!1xw}N(QxTra5!B0LogaSyK}Bdfi5}Q zf%HgZ*Ojh6X%{|r;TyiT`IB;4J9FFE?rA%X@rg+3Mx=DFA8eF2{aKq?a%lT*7H{B- zKRyzCJ~$FQ5!9E)$Nen-5sU{pR%mEAsz#kOS(Swk4jg)NESEW%N+6 z{l#RykjiC`cbcikPlW&%dPYo*lj*oIp37&BM{so@FrFWqJP!69+gwj|f*V}NpZ~aA z{yNatfkuE%LkIjA=q;dcV?DgKW*DuwUSM*(JR}@bUdOiP#-=wNjb6m@8xa8g-6%k* zw!9EKpdRHvxL+<~48rXlaQhB;HoVkyN<6dmsoi^aJc=;N^uzNm*!?O3LAUocXWzyK zXBs@4bqRnKh%<@xy>9QfoFTXG4OhsmoUIGF+h4EO+?}sAXzsvFsET*K9KKqH_3MW4AeESW1a74axJa(z*-Ni^}t#Wto6YEs|OZgzlZ4@QOQ8YdsL>) zR59;TWoaYv@58nc(-xWIc`GJM+lc4$(N^MpRFB_VOkDquPs%yu=bS2%%9)S+;eHy^ zf>T8z*2^6B0Yvc}fXQbPv6(0nJbTCl+fz*Z?Uj21;CcUm`*Td6Gl`fY|BT0o=eXG) z90Fuw9zO4~Ju1n=wnp*}lDk8Efa(eUpA$aE+8te`IPN_xo(5H_3=y3my1%dQNu_;w zw3s!DN{>I_@9F3+O0MgbF4!;j>@rcYO0c`5YadCPGTlP>3)2}RJ_^*xn{<*(sjQLA zpA`OV&Pe)$z2OccK0(|>w&))%rr>OvN(eu4lkvi&@F%9TV9%sR-mIY=Z55+KT|SwP zqXLyqrVZgwWmAwF$tlRkfq}YQB5uTmKRKz7=i`~AKA8Yr=1dJep3ldpO${!8Wemi? zdOVXF1J^k)2$^4cF)fZ33c?Tj@=P*o*x${6!{hwJvBu*(;8cOD{D0y3Cqc+i)|$Qm z432r$k2+Q0D*rbW$yKttN>P@&Ah+rpPF3Ot8QdYcN@myZhpKxpN7(kFP2w2%ZypNYNyPCy0D zdDiE79w2>Q&p3XTWBLN<;~K&|uOlkyE94mMSmP&HybJ~GQ`V1B{4vt!cCvqa`%l~S zc^#Z0eO@JnFmN&Ty&-hKKu<8rickn=MXGNl{#}wa>Rll9|+bO_@>9g5?LIG`Y`|-CNro*Jq zek2GP`m&}nFo<NoBj9%O$P}uf3V-JwzEO-`dy7T3tpG2@s05DQLT_HyI@7( zb<|qvf|Y{T$7Z5t$sj>T6V5T)z($x;hwa!`n{VSzdHU_2-Jb6MB9682fP*f z0dG|>@iG$tT#-n17M1wwaiRn6h4Et_C*y#()|f|WiC5c3ZkFuW$Kf2{%4%`(6Tn-X zKGA7w*Dn#b%v0WPEJ@raRFda)_!8jQ4>9V8B>DO);9eO2&)V!?C3*Y0ahvQ1Z1(>} zcI^Gr2px`o@g574{Fe{38E^#wTT%eW_S)?{_7M32X@B*47(qMGKMJi^aF~_pIf?s( zW{Y2p<&A<-gqxf(xOP0yH>5|xN20ne63KjWB2|FHu5M)Xv2-q*EQlJAt|xN(L^?Mb zPwNRImoMn?;*`LfopjPjCj5K%eQ^(1t|6r3S=Kz6>Tuf3PYd%bn7)1YGEbUXrA ziS`Y~Ur6@#(FIaCA;TXS3J!+!(7}F)-)sz*tMn5>?|<%Ka4_5lQkEKd11t3Xkwd+~ zh<<2b;7BN{M}xhQ5So*hv}1*$3|r{o=%8Ndqv&8C_E0oFnobHlNt>6qLQl$LHR;$d zdR5hWwF{kOQLMfKhPpydpNwY{U|$a(0`rMfRxcKk36aW<=XAdKvIdGxg9x(FUbAUZ zk}usr5)S)RV_rKScu^msm)@6-7Ygvkbsd_>24 & 0x00FF) -# define COMPILER_VERSION_MINOR HEX(__CODEGEARC_VERSION__>>16 & 0x00FF) -# define COMPILER_VERSION_PATCH HEX(__CODEGEARC_VERSION__ & 0xFFFF) - -#elif defined(__BORLANDC__) -# define COMPILER_ID "Borland" - /* __BORLANDC__ = 0xVRR */ -# define COMPILER_VERSION_MAJOR HEX(__BORLANDC__>>8) -# define COMPILER_VERSION_MINOR HEX(__BORLANDC__ & 0xFF) - -#elif defined(__WATCOMC__) -# define COMPILER_ID "Watcom" - /* __WATCOMC__ = VVRR */ -# define COMPILER_VERSION_MAJOR DEC(__WATCOMC__ / 100) -# define COMPILER_VERSION_MINOR DEC(__WATCOMC__ % 100) - -#elif defined(__SUNPRO_CC) -# define COMPILER_ID "SunPro" -# if __SUNPRO_CC >= 0x5100 - /* __SUNPRO_CC = 0xVRRP */ -# define COMPILER_VERSION_MAJOR HEX(__SUNPRO_CC>>12) -# define COMPILER_VERSION_MINOR HEX(__SUNPRO_CC>>4 & 0xFF) -# define COMPILER_VERSION_PATCH HEX(__SUNPRO_CC & 0xF) -# else - /* __SUNPRO_CC = 0xVRP */ -# define COMPILER_VERSION_MAJOR HEX(__SUNPRO_CC>>8) -# define COMPILER_VERSION_MINOR HEX(__SUNPRO_CC>>4 & 0xF) -# define COMPILER_VERSION_PATCH HEX(__SUNPRO_CC & 0xF) -# endif - -#elif defined(__HP_aCC) -# define COMPILER_ID "HP" - /* __HP_aCC = VVRRPP */ -# define COMPILER_VERSION_MAJOR DEC(__HP_aCC/10000) -# define COMPILER_VERSION_MINOR DEC(__HP_aCC/100 % 100) -# define COMPILER_VERSION_PATCH DEC(__HP_aCC % 100) - -#elif defined(__DECCXX) -# define COMPILER_ID "Compaq" - /* __DECCXX_VER = VVRRTPPPP */ -# define COMPILER_VERSION_MAJOR DEC(__DECCXX_VER/10000000) -# define COMPILER_VERSION_MINOR DEC(__DECCXX_VER/100000 % 100) -# define COMPILER_VERSION_PATCH DEC(__DECCXX_VER % 10000) - -#elif defined(__IBMCPP__) -# if defined(__COMPILER_VER__) -# define COMPILER_ID "zOS" -# else -# if __IBMCPP__ >= 800 -# define COMPILER_ID "XL" -# else -# define COMPILER_ID "VisualAge" -# endif - /* __IBMCPP__ = VRP */ -# define COMPILER_VERSION_MAJOR DEC(__IBMCPP__/100) -# define COMPILER_VERSION_MINOR DEC(__IBMCPP__/10 % 10) -# define COMPILER_VERSION_PATCH DEC(__IBMCPP__ % 10) -# endif - -#elif defined(__PGI) -# define COMPILER_ID "PGI" -# define COMPILER_VERSION_MAJOR DEC(__PGIC__) -# define COMPILER_VERSION_MINOR DEC(__PGIC_MINOR__) -# if defined(__PGIC_PATCHLEVEL__) -# define COMPILER_VERSION_PATCH DEC(__PGIC_PATCHLEVEL__) -# endif - -#elif defined(_CRAYC) -# define COMPILER_ID "Cray" -# define COMPILER_VERSION_MAJOR DEC(_RELEASE) -# define COMPILER_VERSION_MINOR DEC(_RELEASE_MINOR) - -#elif defined(__TI_COMPILER_VERSION__) -# define COMPILER_ID "TI" - /* __TI_COMPILER_VERSION__ = VVVRRRPPP */ -# define COMPILER_VERSION_MAJOR DEC(__TI_COMPILER_VERSION__/1000000) -# define COMPILER_VERSION_MINOR DEC(__TI_COMPILER_VERSION__/1000 % 1000) -# define COMPILER_VERSION_PATCH DEC(__TI_COMPILER_VERSION__ % 1000) - -#elif defined(__SCO_VERSION__) -# define COMPILER_ID "SCO" - -#elif defined(__GNUC__) -# define COMPILER_ID "GNU" -# define COMPILER_VERSION_MAJOR DEC(__GNUC__) -# define COMPILER_VERSION_MINOR DEC(__GNUC_MINOR__) -# if defined(__GNUC_PATCHLEVEL__) -# define COMPILER_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__) -# endif - -#elif defined(_MSC_VER) -# define COMPILER_ID "MSVC" - /* _MSC_VER = VVRR */ -# define COMPILER_VERSION_MAJOR DEC(_MSC_VER / 100) -# define COMPILER_VERSION_MINOR DEC(_MSC_VER % 100) -# if defined(_MSC_FULL_VER) -# if _MSC_VER >= 1400 - /* _MSC_FULL_VER = VVRRPPPPP */ -# define COMPILER_VERSION_PATCH DEC(_MSC_FULL_VER % 100000) -# else - /* _MSC_FULL_VER = VVRRPPPP */ -# define COMPILER_VERSION_PATCH DEC(_MSC_FULL_VER % 10000) -# endif -# endif -# if defined(_MSC_BUILD) -# define COMPILER_VERSION_TWEAK DEC(_MSC_BUILD) -# endif - -/* Analog VisualDSP++ >= 4.5.6 */ -#elif defined(__VISUALDSPVERSION__) -# define COMPILER_ID "ADSP" - /* __VISUALDSPVERSION__ = 0xVVRRPP00 */ -# define COMPILER_VERSION_MAJOR HEX(__VISUALDSPVERSION__>>24) -# define COMPILER_VERSION_MINOR HEX(__VISUALDSPVERSION__>>16 & 0xFF) -# define COMPILER_VERSION_PATCH HEX(__VISUALDSPVERSION__>>8 & 0xFF) - -/* Analog VisualDSP++ < 4.5.6 */ -#elif defined(__ADSPBLACKFIN__) || defined(__ADSPTS__) || defined(__ADSP21000__) -# define COMPILER_ID "ADSP" - -/* IAR Systems compiler for embedded systems. - http://www.iar.com */ -#elif defined(__IAR_SYSTEMS_ICC__ ) || defined(__IAR_SYSTEMS_ICC) -# define COMPILER_ID "IAR" - -#elif defined(_SGI_COMPILER_VERSION) || defined(_COMPILER_VERSION) -# define COMPILER_ID "MIPSpro" -# if defined(_SGI_COMPILER_VERSION) - /* _SGI_COMPILER_VERSION = VRP */ -# define COMPILER_VERSION_MAJOR DEC(_SGI_COMPILER_VERSION/100) -# define COMPILER_VERSION_MINOR DEC(_SGI_COMPILER_VERSION/10 % 10) -# define COMPILER_VERSION_PATCH DEC(_SGI_COMPILER_VERSION % 10) -# else - /* _COMPILER_VERSION = VRP */ -# define COMPILER_VERSION_MAJOR DEC(_COMPILER_VERSION/100) -# define COMPILER_VERSION_MINOR DEC(_COMPILER_VERSION/10 % 10) -# define COMPILER_VERSION_PATCH DEC(_COMPILER_VERSION % 10) -# endif - -/* This compiler is either not known or is too old to define an - identification macro. Try to identify the platform and guess that - it is the native compiler. */ -#elif defined(__sgi) -# define COMPILER_ID "MIPSpro" - -#elif defined(__hpux) || defined(__hpua) -# define COMPILER_ID "HP" - -#else /* unknown compiler */ -# define COMPILER_ID "" - -#endif - -/* Construct the string literal in pieces to prevent the source from - getting matched. Store it in a pointer rather than an array - because some compilers will just produce instructions to fill the - array rather than assigning a pointer to a static array. */ -char const* info_compiler = "INFO" ":" "compiler[" COMPILER_ID "]"; - -/* Identify known platforms by name. */ -#if defined(__linux) || defined(__linux__) || defined(linux) -# define PLATFORM_ID "Linux" - -#elif defined(__CYGWIN__) -# define PLATFORM_ID "Cygwin" - -#elif defined(__MINGW32__) -# define PLATFORM_ID "MinGW" - -#elif defined(__APPLE__) -# define PLATFORM_ID "Darwin" - -#elif defined(_WIN32) || defined(__WIN32__) || defined(WIN32) -# define PLATFORM_ID "Windows" - -#elif defined(__FreeBSD__) || defined(__FreeBSD) -# define PLATFORM_ID "FreeBSD" - -#elif defined(__NetBSD__) || defined(__NetBSD) -# define PLATFORM_ID "NetBSD" - -#elif defined(__OpenBSD__) || defined(__OPENBSD) -# define PLATFORM_ID "OpenBSD" - -#elif defined(__sun) || defined(sun) -# define PLATFORM_ID "SunOS" - -#elif defined(_AIX) || defined(__AIX) || defined(__AIX__) || defined(__aix) || defined(__aix__) -# define PLATFORM_ID "AIX" - -#elif defined(__sgi) || defined(__sgi__) || defined(_SGI) -# define PLATFORM_ID "IRIX" - -#elif defined(__hpux) || defined(__hpux__) -# define PLATFORM_ID "HP-UX" - -#elif defined(__HAIKU__) -# define PLATFORM_ID "Haiku" - -#elif defined(__BeOS) || defined(__BEOS__) || defined(_BEOS) -# define PLATFORM_ID "BeOS" - -#elif defined(__QNX__) || defined(__QNXNTO__) -# define PLATFORM_ID "QNX" - -#elif defined(__tru64) || defined(_tru64) || defined(__TRU64__) -# define PLATFORM_ID "Tru64" - -#elif defined(__riscos) || defined(__riscos__) -# define PLATFORM_ID "RISCos" - -#elif defined(__sinix) || defined(__sinix__) || defined(__SINIX__) -# define PLATFORM_ID "SINIX" - -#elif defined(__UNIX_SV__) -# define PLATFORM_ID "UNIX_SV" - -#elif defined(__bsdos__) -# define PLATFORM_ID "BSDOS" - -#elif defined(_MPRAS) || defined(MPRAS) -# define PLATFORM_ID "MP-RAS" - -#elif defined(__osf) || defined(__osf__) -# define PLATFORM_ID "OSF1" - -#elif defined(_SCO_SV) || defined(SCO_SV) || defined(sco_sv) -# define PLATFORM_ID "SCO_SV" - -#elif defined(__ultrix) || defined(__ultrix__) || defined(_ULTRIX) -# define PLATFORM_ID "ULTRIX" - -#elif defined(__XENIX__) || defined(_XENIX) || defined(XENIX) -# define PLATFORM_ID "Xenix" - -#else /* unknown platform */ -# define PLATFORM_ID "" - -#endif - -/* For windows compilers MSVC and Intel we can determine - the architecture of the compiler being used. This is because - the compilers do not have flags that can change the architecture, - but rather depend on which compiler is being used -*/ -#if defined(_WIN32) && defined(_MSC_VER) -# if defined(_M_IA64) -# define ARCHITECTURE_ID "IA64" - -# elif defined(_M_X64) || defined(_M_AMD64) -# define ARCHITECTURE_ID "x64" - -# elif defined(_M_IX86) -# define ARCHITECTURE_ID "X86" - -# elif defined(_M_ARM) -# define ARCHITECTURE_ID "ARM" - -# elif defined(_M_MIPS) -# define ARCHITECTURE_ID "MIPS" - -# elif defined(_M_SH) -# define ARCHITECTURE_ID "SHx" - -# else /* unknown architecture */ -# define ARCHITECTURE_ID "" -# endif - -#else -# define ARCHITECTURE_ID "" -#endif - -/* Convert integer to decimal digit literals. */ -#define DEC(n) \ - ('0' + (((n) / 10000000)%10)), \ - ('0' + (((n) / 1000000)%10)), \ - ('0' + (((n) / 100000)%10)), \ - ('0' + (((n) / 10000)%10)), \ - ('0' + (((n) / 1000)%10)), \ - ('0' + (((n) / 100)%10)), \ - ('0' + (((n) / 10)%10)), \ - ('0' + ((n) % 10)) - -/* Convert integer to hex digit literals. */ -#define HEX(n) \ - ('0' + ((n)>>28 & 0xF)), \ - ('0' + ((n)>>24 & 0xF)), \ - ('0' + ((n)>>20 & 0xF)), \ - ('0' + ((n)>>16 & 0xF)), \ - ('0' + ((n)>>12 & 0xF)), \ - ('0' + ((n)>>8 & 0xF)), \ - ('0' + ((n)>>4 & 0xF)), \ - ('0' + ((n) & 0xF)) - -/* Construct a string literal encoding the version number components. */ -#ifdef COMPILER_VERSION_MAJOR -char const info_version[] = { - 'I', 'N', 'F', 'O', ':', - 'c','o','m','p','i','l','e','r','_','v','e','r','s','i','o','n','[', - COMPILER_VERSION_MAJOR, -# ifdef COMPILER_VERSION_MINOR - '.', COMPILER_VERSION_MINOR, -# ifdef COMPILER_VERSION_PATCH - '.', COMPILER_VERSION_PATCH, -# ifdef COMPILER_VERSION_TWEAK - '.', COMPILER_VERSION_TWEAK, -# endif -# endif -# endif - ']','\0'}; -#endif - -/* Construct the string literal in pieces to prevent the source from - getting matched. Store it in a pointer rather than an array - because some compilers will just produce instructions to fill the - array rather than assigning a pointer to a static array. */ -char const* info_platform = "INFO" ":" "platform[" PLATFORM_ID "]"; -char const* info_arch = "INFO" ":" "arch[" ARCHITECTURE_ID "]"; - - - -/*--------------------------------------------------------------------------*/ - -int main(int argc, char* argv[]) -{ - int require = 0; - require += info_compiler[argc]; - require += info_platform[argc]; -#ifdef COMPILER_VERSION_MAJOR - require += info_version[argc]; -#endif - (void)argv; - return require; -} diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CompilerIdCXX/a.out b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CompilerIdCXX/a.out deleted file mode 100755 index aeee00b0724a9ab52a33c118ab316ac8e587fac6..0000000000000000000000000000000000000000 GIT binary patch literal 0 HcmV?d00001 literal 8692 zcmeHMZ){W76+gC<5DM51g)P8nEC!N6i%CM7nO1F|<2ZRnPGH~^7=&jhc8FX5iR|Y# zX}bp_x#TN^X|Rx-gmzliuBuUHsD}~$3bWfihzt5V77%V02J`UN{k6&G;bmKtTfREp90Dik75-h)Dz`&AgNRrB{1Vttd`J)wv$`ZgM z0OCz7-yeJrI4JJYGrp6;FLM0+}w zEl#yh`Fq-Xx_yP5uS>L>{FCj#(6A_p`>_=@s`EO0Xbe#PrFSXPwvm+#?(s6`-&`U$rTeRdN*^V;PyhHX1Yry{Q{ zqS|>gTzc=ATKZ6(`SY!P(eTCj`9=lQi|6+Vaq(t@0#|>IhPTIEZG8Z92eE>~YWqGE z>dcZ;EnRumKC&=J1yIFqkGw@$<;$+N6NJr?#`foz9B8kW-d4|Fe?qk_s_!iok^BoX zR8L+)vRZn_;D0FjCm#FBDi1)hWf+-PU&M-xywmu7glwNIQ2W%G#}2JT1O1_URaiIt zmdA;;D_tosj$C^lDXuoSRzOKUO5eDlmWr1zhVF_|Pp$7lXQx6p)H7Hi*Ew+gYTg#Q ztDaiFr5-K}UFS|HO^UQU6}mgJFz$1;y+r;Xa4=9R2c8UJKqLQo0@~-RVOg<#ivZGYd9#_s7NS^rDZ9 z1dawq0>=W{!g!^;Pw@SVu~9n|M15>kqfS6oQFy3-?;~Tm%w#H^%pbwoI06EiOvm-{ zTt0IoLepD<@%-4tk&*lJwP%v~LMoR%(qV*dpG^2U(M@dICdZ>4C}|x(`f0iR0?JoW zMo>;;hrEIE1C$p~M)0+*#?eaa1qIu4`@uHlwryIyqWL?v6>h@m8{tR(4l0Z(jvbjPl(TL>nbK74+Qeh(86aJpZ%2iG*&qgb+$ zmq6H!^-NNJuhac)d&t@Pnj_@&oNfp?y{|T^&W@LxRHuJt#h_D3JN*G?N5JXrb$WW8 zt!UrtY!>bMDboGu$2{N3<#Jf=f#n`p?t$eVSnh%UR}akNeviUgDTRU&?@?K62-bH&9X^-0)q1&Y0EvfruzJ&khg3qzmfv8ZUC$#Z=Jd@NW63AuEU}*7tK0a+QIQ`TZnxXf2 zCN+jd=g=WWK2eI{akNkXAMVRD$*gXDH~)=J^N+?Fk8{6WL9O!th3B6DF(O-Y_%bRq z=9wS0E2vfeZ+L`Oi5eVQb&%%cW z#mJEby-m(dfq4x55EJI|`8#((b{MbsY;UdqS;^=Azuc$@)60_oU7=MXPbDc*vlvtP z%-5R~f%AXDZlP5oYx(Ce%gmpZ{8{-zZda%x#qW>dc}&nRP}$x0zU%zo&}whhe}i0? ziO=8tR{3AmYH!uwM=sT$%cnm)6g;1k|3|c?rZS(ud;DLQ|KIZXGyXAVnE4?09XwFIOq7y&Eb0B2`CiHQ$_n0(&u;&T3G&75r{8iE_DMdM zBS4I(EORKMLRg0x#5D5cyBc2&ye?PcYw+Wvm?4pN;EKZQ zs5#StD+RBQ)wmn)MHDk6(hg_=UeC;#4!jBA^G7xQAn^KAjjzM?BxZ(0+JUDBUN6j< z4)_A_I#7+{X@TdrDZ_!M5uUdu7{}!XoJTP;B+?GBeie;5*Z_Z{=~xx$n`^^Ui?#kV zJ?yXsIxPK9bA<4i1rJF4tOY+P{8#E}L!H7nJ~pWB&(nyL|9Oj_9|-%}_cDigy>`7T z>|H=V+$rFpKm;nkp8cN?x8Zm=vqBMe9Q{?`wf#f+_5A!x5ZBg>6Z#izt1}+fiw>!6 zmsi-=j)%t)UrYTX_W`{83?c3jWmiW}3A}dv6cKmhxU!C)7Z6`tXMTN4;MKlK`?2(6 z9iKl#+*4}~ZzA4eZ-oxaxcxQZruobJklzcu6%=XD>+@d_r+%R8CJIRr1N;MVH_nSg z7XNppy>&ftUc&dPhT}{tuW9eKrS%5l_ zrX_OP@pNu9p4Jk2E?>~%#VMehope%9CVV}+zq$)O*D=!QENh%hH9T$Rr@=VOCW@KN zG*V2OMn~W()8JtI>16QGp`g4%3MYJHlaru*J<{2g%8uvwN(lY*?+*-yw9rr=w#sNC zr>ndsKEzh~|M diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeDirectoryInformation.cmake b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeDirectoryInformation.cmake deleted file mode 100644 index 335b0cbcf2..0000000000 --- a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeDirectoryInformation.cmake +++ /dev/null @@ -1,16 +0,0 @@ -# CMAKE generated file: DO NOT EDIT! -# Generated by "Unix Makefiles" Generator, CMake Version 2.8 - -# Relative path conversion top directories. -SET(CMAKE_RELATIVE_PATH_TOP_SOURCE "/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C") -SET(CMAKE_RELATIVE_PATH_TOP_BINARY "/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build") - -# Force unix paths in dependencies. -SET(CMAKE_FORCE_UNIX_PATHS 1) - - -# The C and CXX include file regular expressions for this directory. -SET(CMAKE_C_INCLUDE_REGEX_SCAN "^.*$") -SET(CMAKE_C_INCLUDE_REGEX_COMPLAIN "^$") -SET(CMAKE_CXX_INCLUDE_REGEX_SCAN ${CMAKE_C_INCLUDE_REGEX_SCAN}) -SET(CMAKE_CXX_INCLUDE_REGEX_COMPLAIN ${CMAKE_C_INCLUDE_REGEX_COMPLAIN}) diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeOutput.log b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeOutput.log deleted file mode 100644 index 10bdcf5f63..0000000000 --- a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeOutput.log +++ /dev/null @@ -1,263 +0,0 @@ -The system is: Linux - 3.17.0-031700-lowlatency - x86_64 -Compiling the C compiler identification source file "CMakeCCompilerId.c" succeeded. -Compiler: /usr/bin/cc -Build flags: -Id flags: - -The output was: -0 - - -Compilation of the C compiler identification source "CMakeCCompilerId.c" produced "a.out" - -The C compiler identification is GNU, found in "/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CompilerIdC/a.out" - -Compiling the CXX compiler identification source file "CMakeCXXCompilerId.cpp" succeeded. -Compiler: /usr/bin/c++ -Build flags: -Id flags: - -The output was: -0 - - -Compilation of the CXX compiler identification source "CMakeCXXCompilerId.cpp" produced "a.out" - -The CXX compiler identification is GNU, found in "/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/2.8.12.2/CompilerIdCXX/a.out" - -Determining if the C compiler works passed with the following output: -Change Dir: /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp - -Run Build Command:/usr/bin/make "cmTryCompileExec4097118404/fast" -/usr/bin/make -f CMakeFiles/cmTryCompileExec4097118404.dir/build.make CMakeFiles/cmTryCompileExec4097118404.dir/build -make[1]: Entering directory `/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp' -/usr/bin/cmake -E cmake_progress_report /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp/CMakeFiles 1 -Building C object CMakeFiles/cmTryCompileExec4097118404.dir/testCCompiler.c.o -/usr/bin/cc -o CMakeFiles/cmTryCompileExec4097118404.dir/testCCompiler.c.o -c /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp/testCCompiler.c -Linking C executable cmTryCompileExec4097118404 -/usr/bin/cmake -E cmake_link_script CMakeFiles/cmTryCompileExec4097118404.dir/link.txt --verbose=1 -/usr/bin/cc CMakeFiles/cmTryCompileExec4097118404.dir/testCCompiler.c.o -o cmTryCompileExec4097118404 -rdynamic -make[1]: Leaving directory `/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp' - - -Detecting C compiler ABI info compiled with the following output: -Change Dir: /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp - -Run Build Command:/usr/bin/make "cmTryCompileExec3603593924/fast" -/usr/bin/make -f CMakeFiles/cmTryCompileExec3603593924.dir/build.make CMakeFiles/cmTryCompileExec3603593924.dir/build -make[1]: Entering directory `/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp' -/usr/bin/cmake -E cmake_progress_report /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp/CMakeFiles 1 -Building C object CMakeFiles/cmTryCompileExec3603593924.dir/CMakeCCompilerABI.c.o -/usr/bin/cc -o CMakeFiles/cmTryCompileExec3603593924.dir/CMakeCCompilerABI.c.o -c /usr/share/cmake-2.8/Modules/CMakeCCompilerABI.c -Linking C executable cmTryCompileExec3603593924 -/usr/bin/cmake -E cmake_link_script CMakeFiles/cmTryCompileExec3603593924.dir/link.txt --verbose=1 -/usr/bin/cc -v CMakeFiles/cmTryCompileExec3603593924.dir/CMakeCCompilerABI.c.o -o cmTryCompileExec3603593924 -rdynamic -Using built-in specs. -COLLECT_GCC=/usr/bin/cc -COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/4.8/lto-wrapper -Target: x86_64-linux-gnu -Configured with: ../src/configure -v --with-pkgversion='Ubuntu 4.8.4-2ubuntu1~14.04' --with-bugurl=file:///usr/share/doc/gcc-4.8/README.Bugs --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-4.8 --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --with-gxx-include-dir=/usr/include/c++/4.8 --libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-gnu-unique-object --disable-libmudflap --enable-plugin --with-system-zlib --disable-browser-plugin --enable-java-awt=gtk --enable-gtk-cairo --with-java-home=/usr/lib/jvm/java-1.5.0-gcj-4.8-amd64/jre --enable-java-home --with-jvm-root-dir=/usr/lib/jvm/java-1.5.0-gcj-4.8-amd64 --with-jvm-jar-dir=/usr/lib/jvm-exports/java-1.5.0-gcj-4.8-amd64 --with-arch-directory=amd64 --with-ecj-jar=/usr/share/java/eclipse-ecj.jar --enable-objc-gc --enable-multiarch --disable-werror --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --with-tune=generic --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu -Thread model: posix -gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04) -COMPILER_PATH=/usr/lib/gcc/x86_64-linux-gnu/4.8/:/usr/lib/gcc/x86_64-linux-gnu/4.8/:/usr/lib/gcc/x86_64-linux-gnu/:/usr/lib/gcc/x86_64-linux-gnu/4.8/:/usr/lib/gcc/x86_64-linux-gnu/ -LIBRARY_PATH=/usr/lib/gcc/x86_64-linux-gnu/4.8/:/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu/:/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../../lib/:/lib/x86_64-linux-gnu/:/lib/../lib/:/usr/lib/x86_64-linux-gnu/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../:/lib/:/usr/lib/ -COLLECT_GCC_OPTIONS='-v' '-o' 'cmTryCompileExec3603593924' '-rdynamic' '-mtune=generic' '-march=x86-64' - /usr/lib/gcc/x86_64-linux-gnu/4.8/collect2 --sysroot=/ --build-id --eh-frame-hdr -m elf_x86_64 --hash-style=gnu --as-needed -export-dynamic -dynamic-linker /lib64/ld-linux-x86-64.so.2 -z relro -o cmTryCompileExec3603593924 /usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu/crt1.o /usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu/crti.o /usr/lib/gcc/x86_64-linux-gnu/4.8/crtbegin.o -L/usr/lib/gcc/x86_64-linux-gnu/4.8 -L/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu -L/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../../lib -L/lib/x86_64-linux-gnu -L/lib/../lib -L/usr/lib/x86_64-linux-gnu -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-linux-gnu/4.8/../../.. CMakeFiles/cmTryCompileExec3603593924.dir/CMakeCCompilerABI.c.o -lgcc --as-needed -lgcc_s --no-as-needed -lc -lgcc --as-needed -lgcc_s --no-as-needed /usr/lib/gcc/x86_64-linux-gnu/4.8/crtend.o /usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu/crtn.o -make[1]: Leaving directory `/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp' - - -Parsed C implicit link information from above output: - link line regex: [^( *|.*[/\])(ld|([^/\]+-)?ld|collect2)[^/\]*( |$)] - ignore line: [Change Dir: /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp] - ignore line: [] - ignore line: [Run Build Command:/usr/bin/make "cmTryCompileExec3603593924/fast"] - ignore line: [/usr/bin/make -f CMakeFiles/cmTryCompileExec3603593924.dir/build.make CMakeFiles/cmTryCompileExec3603593924.dir/build] - ignore line: [make[1]: Entering directory `/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp'] - ignore line: [/usr/bin/cmake -E cmake_progress_report /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp/CMakeFiles 1] - ignore line: [Building C object CMakeFiles/cmTryCompileExec3603593924.dir/CMakeCCompilerABI.c.o] - ignore line: [/usr/bin/cc -o CMakeFiles/cmTryCompileExec3603593924.dir/CMakeCCompilerABI.c.o -c /usr/share/cmake-2.8/Modules/CMakeCCompilerABI.c] - ignore line: [Linking C executable cmTryCompileExec3603593924] - ignore line: [/usr/bin/cmake -E cmake_link_script CMakeFiles/cmTryCompileExec3603593924.dir/link.txt --verbose=1] - ignore line: [/usr/bin/cc -v CMakeFiles/cmTryCompileExec3603593924.dir/CMakeCCompilerABI.c.o -o cmTryCompileExec3603593924 -rdynamic ] - ignore line: [Using built-in specs.] - ignore line: [COLLECT_GCC=/usr/bin/cc] - ignore line: [COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/4.8/lto-wrapper] - ignore line: [Target: x86_64-linux-gnu] - ignore line: [Configured with: ../src/configure -v --with-pkgversion='Ubuntu 4.8.4-2ubuntu1~14.04' --with-bugurl=file:///usr/share/doc/gcc-4.8/README.Bugs --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-4.8 --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --with-gxx-include-dir=/usr/include/c++/4.8 --libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-gnu-unique-object --disable-libmudflap --enable-plugin --with-system-zlib --disable-browser-plugin --enable-java-awt=gtk --enable-gtk-cairo --with-java-home=/usr/lib/jvm/java-1.5.0-gcj-4.8-amd64/jre --enable-java-home --with-jvm-root-dir=/usr/lib/jvm/java-1.5.0-gcj-4.8-amd64 --with-jvm-jar-dir=/usr/lib/jvm-exports/java-1.5.0-gcj-4.8-amd64 --with-arch-directory=amd64 --with-ecj-jar=/usr/share/java/eclipse-ecj.jar --enable-objc-gc --enable-multiarch --disable-werror --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --with-tune=generic --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu] - ignore line: [Thread model: posix] - ignore line: [gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04) ] - ignore line: [COMPILER_PATH=/usr/lib/gcc/x86_64-linux-gnu/4.8/:/usr/lib/gcc/x86_64-linux-gnu/4.8/:/usr/lib/gcc/x86_64-linux-gnu/:/usr/lib/gcc/x86_64-linux-gnu/4.8/:/usr/lib/gcc/x86_64-linux-gnu/] - ignore line: [LIBRARY_PATH=/usr/lib/gcc/x86_64-linux-gnu/4.8/:/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu/:/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../../lib/:/lib/x86_64-linux-gnu/:/lib/../lib/:/usr/lib/x86_64-linux-gnu/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../:/lib/:/usr/lib/] - ignore line: [COLLECT_GCC_OPTIONS='-v' '-o' 'cmTryCompileExec3603593924' '-rdynamic' '-mtune=generic' '-march=x86-64'] - link line: [ /usr/lib/gcc/x86_64-linux-gnu/4.8/collect2 --sysroot=/ --build-id --eh-frame-hdr -m elf_x86_64 --hash-style=gnu --as-needed -export-dynamic -dynamic-linker /lib64/ld-linux-x86-64.so.2 -z relro -o cmTryCompileExec3603593924 /usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu/crt1.o /usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu/crti.o /usr/lib/gcc/x86_64-linux-gnu/4.8/crtbegin.o -L/usr/lib/gcc/x86_64-linux-gnu/4.8 -L/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu -L/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../../lib -L/lib/x86_64-linux-gnu -L/lib/../lib -L/usr/lib/x86_64-linux-gnu -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-linux-gnu/4.8/../../.. CMakeFiles/cmTryCompileExec3603593924.dir/CMakeCCompilerABI.c.o -lgcc --as-needed -lgcc_s --no-as-needed -lc -lgcc --as-needed -lgcc_s --no-as-needed /usr/lib/gcc/x86_64-linux-gnu/4.8/crtend.o /usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu/crtn.o] - arg [/usr/lib/gcc/x86_64-linux-gnu/4.8/collect2] ==> ignore - arg [--sysroot=/] ==> ignore - arg [--build-id] ==> ignore - arg [--eh-frame-hdr] ==> ignore - arg [-m] ==> ignore - arg [elf_x86_64] ==> ignore - arg [--hash-style=gnu] ==> ignore - arg [--as-needed] ==> ignore - arg [-export-dynamic] ==> ignore - arg [-dynamic-linker] ==> ignore - arg [/lib64/ld-linux-x86-64.so.2] ==> ignore - arg [-zrelro] ==> ignore - arg [-o] ==> ignore - arg [cmTryCompileExec3603593924] ==> ignore - arg [/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu/crt1.o] ==> ignore - arg [/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu/crti.o] ==> ignore - arg [/usr/lib/gcc/x86_64-linux-gnu/4.8/crtbegin.o] ==> ignore - arg [-L/usr/lib/gcc/x86_64-linux-gnu/4.8] ==> dir [/usr/lib/gcc/x86_64-linux-gnu/4.8] - arg [-L/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu] ==> dir [/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu] - arg [-L/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../../lib] ==> dir [/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../../lib] - arg [-L/lib/x86_64-linux-gnu] ==> dir [/lib/x86_64-linux-gnu] - arg [-L/lib/../lib] ==> dir [/lib/../lib] - arg [-L/usr/lib/x86_64-linux-gnu] ==> dir [/usr/lib/x86_64-linux-gnu] - arg [-L/usr/lib/../lib] ==> dir [/usr/lib/../lib] - arg [-L/usr/lib/gcc/x86_64-linux-gnu/4.8/../../..] ==> dir [/usr/lib/gcc/x86_64-linux-gnu/4.8/../../..] - arg [CMakeFiles/cmTryCompileExec3603593924.dir/CMakeCCompilerABI.c.o] ==> ignore - arg [-lgcc] ==> lib [gcc] - arg [--as-needed] ==> ignore - arg [-lgcc_s] ==> lib [gcc_s] - arg [--no-as-needed] ==> ignore - arg [-lc] ==> lib [c] - arg [-lgcc] ==> lib [gcc] - arg [--as-needed] ==> ignore - arg [-lgcc_s] ==> lib [gcc_s] - arg [--no-as-needed] ==> ignore - arg [/usr/lib/gcc/x86_64-linux-gnu/4.8/crtend.o] ==> ignore - arg [/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu/crtn.o] ==> ignore - remove lib [gcc] - remove lib [gcc_s] - remove lib [gcc] - remove lib [gcc_s] - collapse library dir [/usr/lib/gcc/x86_64-linux-gnu/4.8] ==> [/usr/lib/gcc/x86_64-linux-gnu/4.8] - collapse library dir [/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu] ==> [/usr/lib/x86_64-linux-gnu] - collapse library dir [/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../../lib] ==> [/usr/lib] - collapse library dir [/lib/x86_64-linux-gnu] ==> [/lib/x86_64-linux-gnu] - collapse library dir [/lib/../lib] ==> [/lib] - collapse library dir [/usr/lib/x86_64-linux-gnu] ==> [/usr/lib/x86_64-linux-gnu] - collapse library dir [/usr/lib/../lib] ==> [/usr/lib] - collapse library dir [/usr/lib/gcc/x86_64-linux-gnu/4.8/../../..] ==> [/usr/lib] - implicit libs: [c] - implicit dirs: [/usr/lib/gcc/x86_64-linux-gnu/4.8;/usr/lib/x86_64-linux-gnu;/usr/lib;/lib/x86_64-linux-gnu;/lib] - implicit fwks: [] - - -Determining if the CXX compiler works passed with the following output: -Change Dir: /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp - -Run Build Command:/usr/bin/make "cmTryCompileExec997608794/fast" -/usr/bin/make -f CMakeFiles/cmTryCompileExec997608794.dir/build.make CMakeFiles/cmTryCompileExec997608794.dir/build -make[1]: Entering directory `/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp' -/usr/bin/cmake -E cmake_progress_report /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp/CMakeFiles 1 -Building CXX object CMakeFiles/cmTryCompileExec997608794.dir/testCXXCompiler.cxx.o -/usr/bin/c++ -o CMakeFiles/cmTryCompileExec997608794.dir/testCXXCompiler.cxx.o -c /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp/testCXXCompiler.cxx -Linking CXX executable cmTryCompileExec997608794 -/usr/bin/cmake -E cmake_link_script CMakeFiles/cmTryCompileExec997608794.dir/link.txt --verbose=1 -/usr/bin/c++ CMakeFiles/cmTryCompileExec997608794.dir/testCXXCompiler.cxx.o -o cmTryCompileExec997608794 -rdynamic -make[1]: Leaving directory `/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp' - - -Detecting CXX compiler ABI info compiled with the following output: -Change Dir: /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp - -Run Build Command:/usr/bin/make "cmTryCompileExec2573420878/fast" -/usr/bin/make -f CMakeFiles/cmTryCompileExec2573420878.dir/build.make CMakeFiles/cmTryCompileExec2573420878.dir/build -make[1]: Entering directory `/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp' -/usr/bin/cmake -E cmake_progress_report /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp/CMakeFiles 1 -Building CXX object CMakeFiles/cmTryCompileExec2573420878.dir/CMakeCXXCompilerABI.cpp.o -/usr/bin/c++ -o CMakeFiles/cmTryCompileExec2573420878.dir/CMakeCXXCompilerABI.cpp.o -c /usr/share/cmake-2.8/Modules/CMakeCXXCompilerABI.cpp -Linking CXX executable cmTryCompileExec2573420878 -/usr/bin/cmake -E cmake_link_script CMakeFiles/cmTryCompileExec2573420878.dir/link.txt --verbose=1 -/usr/bin/c++ -v CMakeFiles/cmTryCompileExec2573420878.dir/CMakeCXXCompilerABI.cpp.o -o cmTryCompileExec2573420878 -rdynamic -Using built-in specs. -COLLECT_GCC=/usr/bin/c++ -COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/4.8/lto-wrapper -Target: x86_64-linux-gnu -Configured with: ../src/configure -v --with-pkgversion='Ubuntu 4.8.4-2ubuntu1~14.04' --with-bugurl=file:///usr/share/doc/gcc-4.8/README.Bugs --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-4.8 --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --with-gxx-include-dir=/usr/include/c++/4.8 --libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-gnu-unique-object --disable-libmudflap --enable-plugin --with-system-zlib --disable-browser-plugin --enable-java-awt=gtk --enable-gtk-cairo --with-java-home=/usr/lib/jvm/java-1.5.0-gcj-4.8-amd64/jre --enable-java-home --with-jvm-root-dir=/usr/lib/jvm/java-1.5.0-gcj-4.8-amd64 --with-jvm-jar-dir=/usr/lib/jvm-exports/java-1.5.0-gcj-4.8-amd64 --with-arch-directory=amd64 --with-ecj-jar=/usr/share/java/eclipse-ecj.jar --enable-objc-gc --enable-multiarch --disable-werror --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --with-tune=generic --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu -Thread model: posix -gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04) -COMPILER_PATH=/usr/lib/gcc/x86_64-linux-gnu/4.8/:/usr/lib/gcc/x86_64-linux-gnu/4.8/:/usr/lib/gcc/x86_64-linux-gnu/:/usr/lib/gcc/x86_64-linux-gnu/4.8/:/usr/lib/gcc/x86_64-linux-gnu/ -LIBRARY_PATH=/usr/lib/gcc/x86_64-linux-gnu/4.8/:/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu/:/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../../lib/:/lib/x86_64-linux-gnu/:/lib/../lib/:/usr/lib/x86_64-linux-gnu/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../:/lib/:/usr/lib/ -COLLECT_GCC_OPTIONS='-v' '-o' 'cmTryCompileExec2573420878' '-rdynamic' '-shared-libgcc' '-mtune=generic' '-march=x86-64' - /usr/lib/gcc/x86_64-linux-gnu/4.8/collect2 --sysroot=/ --build-id --eh-frame-hdr -m elf_x86_64 --hash-style=gnu --as-needed -export-dynamic -dynamic-linker /lib64/ld-linux-x86-64.so.2 -z relro -o cmTryCompileExec2573420878 /usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu/crt1.o /usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu/crti.o /usr/lib/gcc/x86_64-linux-gnu/4.8/crtbegin.o -L/usr/lib/gcc/x86_64-linux-gnu/4.8 -L/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu -L/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../../lib -L/lib/x86_64-linux-gnu -L/lib/../lib -L/usr/lib/x86_64-linux-gnu -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-linux-gnu/4.8/../../.. CMakeFiles/cmTryCompileExec2573420878.dir/CMakeCXXCompilerABI.cpp.o -lstdc++ -lm -lgcc_s -lgcc -lc -lgcc_s -lgcc /usr/lib/gcc/x86_64-linux-gnu/4.8/crtend.o /usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu/crtn.o -make[1]: Leaving directory `/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp' - - -Parsed CXX implicit link information from above output: - link line regex: [^( *|.*[/\])(ld|([^/\]+-)?ld|collect2)[^/\]*( |$)] - ignore line: [Change Dir: /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp] - ignore line: [] - ignore line: [Run Build Command:/usr/bin/make "cmTryCompileExec2573420878/fast"] - ignore line: [/usr/bin/make -f CMakeFiles/cmTryCompileExec2573420878.dir/build.make CMakeFiles/cmTryCompileExec2573420878.dir/build] - ignore line: [make[1]: Entering directory `/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp'] - ignore line: [/usr/bin/cmake -E cmake_progress_report /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/CMakeTmp/CMakeFiles 1] - ignore line: [Building CXX object CMakeFiles/cmTryCompileExec2573420878.dir/CMakeCXXCompilerABI.cpp.o] - ignore line: [/usr/bin/c++ -o CMakeFiles/cmTryCompileExec2573420878.dir/CMakeCXXCompilerABI.cpp.o -c /usr/share/cmake-2.8/Modules/CMakeCXXCompilerABI.cpp] - ignore line: [Linking CXX executable cmTryCompileExec2573420878] - ignore line: [/usr/bin/cmake -E cmake_link_script CMakeFiles/cmTryCompileExec2573420878.dir/link.txt --verbose=1] - ignore line: [/usr/bin/c++ -v CMakeFiles/cmTryCompileExec2573420878.dir/CMakeCXXCompilerABI.cpp.o -o cmTryCompileExec2573420878 -rdynamic ] - ignore line: [Using built-in specs.] - ignore line: [COLLECT_GCC=/usr/bin/c++] - ignore line: [COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/4.8/lto-wrapper] - ignore line: [Target: x86_64-linux-gnu] - ignore line: [Configured with: ../src/configure -v --with-pkgversion='Ubuntu 4.8.4-2ubuntu1~14.04' --with-bugurl=file:///usr/share/doc/gcc-4.8/README.Bugs --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-4.8 --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --with-gxx-include-dir=/usr/include/c++/4.8 --libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-gnu-unique-object --disable-libmudflap --enable-plugin --with-system-zlib --disable-browser-plugin --enable-java-awt=gtk --enable-gtk-cairo --with-java-home=/usr/lib/jvm/java-1.5.0-gcj-4.8-amd64/jre --enable-java-home --with-jvm-root-dir=/usr/lib/jvm/java-1.5.0-gcj-4.8-amd64 --with-jvm-jar-dir=/usr/lib/jvm-exports/java-1.5.0-gcj-4.8-amd64 --with-arch-directory=amd64 --with-ecj-jar=/usr/share/java/eclipse-ecj.jar --enable-objc-gc --enable-multiarch --disable-werror --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --with-tune=generic --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu] - ignore line: [Thread model: posix] - ignore line: [gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04) ] - ignore line: [COMPILER_PATH=/usr/lib/gcc/x86_64-linux-gnu/4.8/:/usr/lib/gcc/x86_64-linux-gnu/4.8/:/usr/lib/gcc/x86_64-linux-gnu/:/usr/lib/gcc/x86_64-linux-gnu/4.8/:/usr/lib/gcc/x86_64-linux-gnu/] - ignore line: [LIBRARY_PATH=/usr/lib/gcc/x86_64-linux-gnu/4.8/:/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu/:/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../../lib/:/lib/x86_64-linux-gnu/:/lib/../lib/:/usr/lib/x86_64-linux-gnu/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../:/lib/:/usr/lib/] - ignore line: [COLLECT_GCC_OPTIONS='-v' '-o' 'cmTryCompileExec2573420878' '-rdynamic' '-shared-libgcc' '-mtune=generic' '-march=x86-64'] - link line: [ /usr/lib/gcc/x86_64-linux-gnu/4.8/collect2 --sysroot=/ --build-id --eh-frame-hdr -m elf_x86_64 --hash-style=gnu --as-needed -export-dynamic -dynamic-linker /lib64/ld-linux-x86-64.so.2 -z relro -o cmTryCompileExec2573420878 /usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu/crt1.o /usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu/crti.o /usr/lib/gcc/x86_64-linux-gnu/4.8/crtbegin.o -L/usr/lib/gcc/x86_64-linux-gnu/4.8 -L/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu -L/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../../lib -L/lib/x86_64-linux-gnu -L/lib/../lib -L/usr/lib/x86_64-linux-gnu -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-linux-gnu/4.8/../../.. CMakeFiles/cmTryCompileExec2573420878.dir/CMakeCXXCompilerABI.cpp.o -lstdc++ -lm -lgcc_s -lgcc -lc -lgcc_s -lgcc /usr/lib/gcc/x86_64-linux-gnu/4.8/crtend.o /usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu/crtn.o] - arg [/usr/lib/gcc/x86_64-linux-gnu/4.8/collect2] ==> ignore - arg [--sysroot=/] ==> ignore - arg [--build-id] ==> ignore - arg [--eh-frame-hdr] ==> ignore - arg [-m] ==> ignore - arg [elf_x86_64] ==> ignore - arg [--hash-style=gnu] ==> ignore - arg [--as-needed] ==> ignore - arg [-export-dynamic] ==> ignore - arg [-dynamic-linker] ==> ignore - arg [/lib64/ld-linux-x86-64.so.2] ==> ignore - arg [-zrelro] ==> ignore - arg [-o] ==> ignore - arg [cmTryCompileExec2573420878] ==> ignore - arg [/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu/crt1.o] ==> ignore - arg [/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu/crti.o] ==> ignore - arg [/usr/lib/gcc/x86_64-linux-gnu/4.8/crtbegin.o] ==> ignore - arg [-L/usr/lib/gcc/x86_64-linux-gnu/4.8] ==> dir [/usr/lib/gcc/x86_64-linux-gnu/4.8] - arg [-L/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu] ==> dir [/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu] - arg [-L/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../../lib] ==> dir [/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../../lib] - arg [-L/lib/x86_64-linux-gnu] ==> dir [/lib/x86_64-linux-gnu] - arg [-L/lib/../lib] ==> dir [/lib/../lib] - arg [-L/usr/lib/x86_64-linux-gnu] ==> dir [/usr/lib/x86_64-linux-gnu] - arg [-L/usr/lib/../lib] ==> dir [/usr/lib/../lib] - arg [-L/usr/lib/gcc/x86_64-linux-gnu/4.8/../../..] ==> dir [/usr/lib/gcc/x86_64-linux-gnu/4.8/../../..] - arg [CMakeFiles/cmTryCompileExec2573420878.dir/CMakeCXXCompilerABI.cpp.o] ==> ignore - arg [-lstdc++] ==> lib [stdc++] - arg [-lm] ==> lib [m] - arg [-lgcc_s] ==> lib [gcc_s] - arg [-lgcc] ==> lib [gcc] - arg [-lc] ==> lib [c] - arg [-lgcc_s] ==> lib [gcc_s] - arg [-lgcc] ==> lib [gcc] - arg [/usr/lib/gcc/x86_64-linux-gnu/4.8/crtend.o] ==> ignore - arg [/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu/crtn.o] ==> ignore - remove lib [gcc_s] - remove lib [gcc] - remove lib [gcc_s] - remove lib [gcc] - collapse library dir [/usr/lib/gcc/x86_64-linux-gnu/4.8] ==> [/usr/lib/gcc/x86_64-linux-gnu/4.8] - collapse library dir [/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../x86_64-linux-gnu] ==> [/usr/lib/x86_64-linux-gnu] - collapse library dir [/usr/lib/gcc/x86_64-linux-gnu/4.8/../../../../lib] ==> [/usr/lib] - collapse library dir [/lib/x86_64-linux-gnu] ==> [/lib/x86_64-linux-gnu] - collapse library dir [/lib/../lib] ==> [/lib] - collapse library dir [/usr/lib/x86_64-linux-gnu] ==> [/usr/lib/x86_64-linux-gnu] - collapse library dir [/usr/lib/../lib] ==> [/usr/lib] - collapse library dir [/usr/lib/gcc/x86_64-linux-gnu/4.8/../../..] ==> [/usr/lib] - implicit libs: [stdc++;m;c] - implicit dirs: [/usr/lib/gcc/x86_64-linux-gnu/4.8;/usr/lib/x86_64-linux-gnu;/usr/lib;/lib/x86_64-linux-gnu;/lib] - implicit fwks: [] - - diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Makefile.cmake b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Makefile.cmake deleted file mode 100644 index 119272f1f1..0000000000 --- a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Makefile.cmake +++ /dev/null @@ -1,43 +0,0 @@ -# CMAKE generated file: DO NOT EDIT! -# Generated by "Unix Makefiles" Generator, CMake Version 2.8 - -# The generator used is: -SET(CMAKE_DEPENDS_GENERATOR "Unix Makefiles") - -# The top level Makefile was generated from the following files: -SET(CMAKE_MAKEFILE_DEPENDS - "CMakeCache.txt" - "../CMakeLists.txt" - "CMakeFiles/2.8.12.2/CMakeCCompiler.cmake" - "CMakeFiles/2.8.12.2/CMakeCXXCompiler.cmake" - "CMakeFiles/2.8.12.2/CMakeSystem.cmake" - "/usr/share/cmake-2.8/Modules/CMakeCInformation.cmake" - "/usr/share/cmake-2.8/Modules/CMakeCXXInformation.cmake" - "/usr/share/cmake-2.8/Modules/CMakeCommonLanguageInclude.cmake" - "/usr/share/cmake-2.8/Modules/CMakeGenericSystem.cmake" - "/usr/share/cmake-2.8/Modules/CMakeSystemSpecificInformation.cmake" - "/usr/share/cmake-2.8/Modules/Compiler/GNU-C.cmake" - "/usr/share/cmake-2.8/Modules/Compiler/GNU-CXX.cmake" - "/usr/share/cmake-2.8/Modules/Compiler/GNU.cmake" - "/usr/share/cmake-2.8/Modules/Platform/Linux-GNU-C.cmake" - "/usr/share/cmake-2.8/Modules/Platform/Linux-GNU-CXX.cmake" - "/usr/share/cmake-2.8/Modules/Platform/Linux-GNU.cmake" - "/usr/share/cmake-2.8/Modules/Platform/Linux.cmake" - "/usr/share/cmake-2.8/Modules/Platform/UnixPaths.cmake" - ) - -# The corresponding makefile is: -SET(CMAKE_MAKEFILE_OUTPUTS - "Makefile" - "CMakeFiles/cmake.check_cache" - ) - -# Byproducts of CMake generate step: -SET(CMAKE_MAKEFILE_PRODUCTS - "CMakeFiles/CMakeDirectoryInformation.cmake" - ) - -# Dependency information for all targets: -SET(CMAKE_DEPEND_INFO_FILES - "CMakeFiles/Si5351C.dir/DependInfo.cmake" - ) diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Makefile2 b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Makefile2 deleted file mode 100644 index 16016a9bd2..0000000000 --- a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Makefile2 +++ /dev/null @@ -1,102 +0,0 @@ -# CMAKE generated file: DO NOT EDIT! -# Generated by "Unix Makefiles" Generator, CMake Version 2.8 - -# Default target executed when no arguments are given to make. -default_target: all -.PHONY : default_target - -# The main recursive all target -all: -.PHONY : all - -# The main recursive preinstall target -preinstall: -.PHONY : preinstall - -#============================================================================= -# Special targets provided by cmake. - -# Disable implicit rules so canonical targets will work. -.SUFFIXES: - -# Remove some rules from gmake that .SUFFIXES does not remove. -SUFFIXES = - -.SUFFIXES: .hpux_make_needs_suffix_list - -# Suppress display of executed commands. -$(VERBOSE).SILENT: - -# A target that is always out of date. -cmake_force: -.PHONY : cmake_force - -#============================================================================= -# Set environment variables for the build. - -# The shell in which to execute make rules. -SHELL = /bin/sh - -# The CMake executable. -CMAKE_COMMAND = /usr/bin/cmake - -# The command to remove a file. -RM = /usr/bin/cmake -E remove -f - -# Escaping for special characters. -EQUALS = = - -# The program to use to edit the cache. -CMAKE_EDIT_COMMAND = /usr/bin/ccmake - -# The top-level source directory on which CMake was run. -CMAKE_SOURCE_DIR = /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C - -# The top-level build directory on which CMake was run. -CMAKE_BINARY_DIR = /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build - -#============================================================================= -# Target rules for target CMakeFiles/Si5351C.dir - -# All Build rule for target. -CMakeFiles/Si5351C.dir/all: - $(MAKE) -f CMakeFiles/Si5351C.dir/build.make CMakeFiles/Si5351C.dir/depend - $(MAKE) -f CMakeFiles/Si5351C.dir/build.make CMakeFiles/Si5351C.dir/build - $(CMAKE_COMMAND) -E cmake_progress_report /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles 1 - @echo "Built target Si5351C" -.PHONY : CMakeFiles/Si5351C.dir/all - -# Include target in all. -all: CMakeFiles/Si5351C.dir/all -.PHONY : all - -# Build rule for subdir invocation for target. -CMakeFiles/Si5351C.dir/rule: cmake_check_build_system - $(CMAKE_COMMAND) -E cmake_progress_start /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles 1 - $(MAKE) -f CMakeFiles/Makefile2 CMakeFiles/Si5351C.dir/all - $(CMAKE_COMMAND) -E cmake_progress_start /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles 0 -.PHONY : CMakeFiles/Si5351C.dir/rule - -# Convenience name for target. -Si5351C: CMakeFiles/Si5351C.dir/rule -.PHONY : Si5351C - -# clean rule for target. -CMakeFiles/Si5351C.dir/clean: - $(MAKE) -f CMakeFiles/Si5351C.dir/build.make CMakeFiles/Si5351C.dir/clean -.PHONY : CMakeFiles/Si5351C.dir/clean - -# clean rule for target. -clean: CMakeFiles/Si5351C.dir/clean -.PHONY : clean - -#============================================================================= -# Special targets to cleanup operation of make. - -# Special rule to run CMake to check the build system integrity. -# No rule that depends on this can have commands that come from listfiles -# because they might be regenerated. -cmake_check_build_system: - $(CMAKE_COMMAND) -H$(CMAKE_SOURCE_DIR) -B$(CMAKE_BINARY_DIR) --check-build-system CMakeFiles/Makefile.cmake 0 -.PHONY : cmake_check_build_system - diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/CXX.includecache b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/CXX.includecache deleted file mode 100644 index b84d7a1def..0000000000 --- a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/CXX.includecache +++ /dev/null @@ -1,8 +0,0 @@ -#IncludeRegexLine: ^[ ]*#[ ]*(include|import)[ ]*[<"]([^">]+)([">]) - -#IncludeRegexScan: ^.*$ - -#IncludeRegexComplain: ^$ - -#IncludeRegexTransform: - diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/DependInfo.cmake b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/DependInfo.cmake deleted file mode 100644 index 8fbd267efc..0000000000 --- a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/DependInfo.cmake +++ /dev/null @@ -1,22 +0,0 @@ -# The set of languages for which implicit dependencies are needed: -SET(CMAKE_DEPENDS_LANGUAGES - "CXX" - ) -# The set of files for implicit dependencies of each language: -SET(CMAKE_DEPENDS_CHECK_CXX - "/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/Si5351C.cpp" "/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/Si5351C.o" - ) -SET(CMAKE_CXX_COMPILER_ID "GNU") - -# Targets to which this target links. -SET(CMAKE_TARGET_LINKED_INFO_FILES - ) - -# The include file search paths: -SET(CMAKE_C_TARGET_INCLUDE_PATH - "../../lms7002m" - ".." - ) -SET(CMAKE_CXX_TARGET_INCLUDE_PATH ${CMAKE_C_TARGET_INCLUDE_PATH}) -SET(CMAKE_Fortran_TARGET_INCLUDE_PATH ${CMAKE_C_TARGET_INCLUDE_PATH}) -SET(CMAKE_ASM_TARGET_INCLUDE_PATH ${CMAKE_C_TARGET_INCLUDE_PATH}) diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/Si5351C.o b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/Si5351C.o deleted file mode 100644 index 9c3483db4eb7c2c2bfd8b4bd29d4f87b7c961757..0000000000000000000000000000000000000000 GIT binary patch literal 0 HcmV?d00001 literal 144184 zcmeFa4R}?>wKqP=A%F@dDk@rPV~Q5PFo6I;Q3K@Qi3AdppjOetAvqx_`8Z8Z_^@cv z5K9`dRHe1I)>5mjw^}dPqNR#8C^I6I6bZ%G0RKr?P;`u~eQ(aJMAG z%6U{?N#$p$yoSp8R9;8r0xB0$Sx03(l}RcWQQ1W0=crsvWiyqnRJKw1c`DnfOjEgp z%B55;r}BC#zd+>*DsQB6C6zZ(*+u0lDsQ3kOH}qy`DH3^rSdi^*HZaaD(|3j9hG0F z@*7lslghiP{1%n>P`RGUd#U^`mG@D3Kb7C7@&PJ;K;?r}{*cOtsoX&2BUEmr@=+>( zOywpjAE$CNl|QBODJr*6`3#j?sr(t0+o;?@<+D^iN99f`pQrLgD*LH?iOOG4`AaHa zq4HN$?xONHRK7~(YgF#0@(n8Ar1C8)_fYvZl>=1%iON4yxu42+sCFfHaCjKPt{V=rWhcYG!@hVNin|MBbo z9qZ}b73-PT|88zxblEPQ!-1Z8V8R1X z1zG~$b;AMH`KD+O)$jE@jrW3AFH=Z=Po6O3^xB$O*S>t{!!B$X>*^c+1Pl@@@7X$# zSJCrFTnSlu*VfUou7Rvr*M}c>zD?~)o)~6mm+xtpQv%!`$93+f$SKydopanC-G?6s z#`i||V*A6tz`task7SlzbOw`L=guIRpOXb`*T=kTF@JJ$lO z1MRxD=3g^?{V0gjmIiWRabO< zR@V*dhu!$Z_UL`N$Zd9S^gcT)s07Ddv$hb70j5}uQ)NxnaNrJ#_krTC$PRZ!?*q>F z&A;(KwnraWN1PwX#QA|ibABM}rW+pk0r0%>A+XPXTKWc6581112Isw6v-U#lpubnV z7RHbFRrplb{;XAf>0x{{2QHEgpbh>v4@Ud=*qS-u2QR>oe%#*^eW>e(hgj$E-sr}z z16h(T=LzVI5J;}tvuohgSkE(D2ZCZfFxiDr@V#Z%NYCrqmxta5!C-%^>xTWT^OT<; zx5ux8K5+Mc3O{mp0`(4nR{LW;dCv;Jt%=>VFE$ip_dL1j?;n30>v?no6!o#*A!m#O zs#s5SPf=fNO?N-9BZ# z=XMc|b06!*+G(He%pQnC8~os!y)bFA2a>>K2MS-aZYwWb?Rc!_J?-tr>fUwOw&$f- z?>gSQyJ%L+4&@BTaVBl~Nal85@v%}-*3jsVb4(bzC_7&FlJcX0)tT>TN+^U;;OShtK9Yf?~D^mI2uvAugU{EOz@-hCI`!3`T| z=;imcl=MK%?dA-!`nQ*k!WP#0ZKbDKE1&M=3t!KSye`f@OK`c6Yp~*0DI}*41mr$e zItI+Py8COOld9RR*L)pnwsqfuI&bT~6ALgtLmNw9UejHuf22+*{;T>rPw}x{)t9?! z8R!YT7U;xlqH7(#(LQ;CxdNr8Al`gu>n1y4Qi0z9H%9?gM!5lc=daJU!k0fa8Sb z4dhV8dPn2zgenJNv8m7G-q{CncAOBBFHzQ_PPn*?04^(^YB>`m-_1!8rbD#=rZ(An~^*8{_Ph110z7Z;}#KN4+qnUO-HD6 zB5-CHOkHAN&u}nZE~jhk868gyhqd`cFbWPN4^!!3o6rKZd*aa=K5y?{4-Eikd*{Q) zUjEUre8qYp3X7P!q#$Ffy}iIJLyOq(43$?62d_+lMvtRPu@Byb#5+UtWuE3A;C`{Y zFLxd69QtBe`(a(!0{PO~frZ<-Q*owi)^Vp^GiR-^tTrR(^?}QKreg;2kY@LS2SLUS zGWad6IwR==E;&n9b#bF+bv=ou&dI$EU2uE%eef^WXM6Wcoto|cPt;I2dKr~ zM}efb8$a3xsk<*d*4l!y0|?vM0}ar9#~FKB?>f%5?&mSc&bGXs0~y*%l#}&btoO3v zG$4N^3-i!F*2RIR#)={M3vS_N4)5aHLhq6Lu-w}&7A~zfypS6s_YPc6&e3@SlOA5D zgP6wmaGSYMpY32QaXhh)YC7UV@-TL)S1{=ATQ=<77;MW2PK?2V_0rp2yR%|PJ&n-Q z@8(|B2kkKPgY7-Izee+pp9Z0)Vc#xk#HMoDFvNGb*(3BEG=27+-0QY9z|Ow`w*H!^ z5!<^T0;%X7d#hnL+RHy?9&jWuv~UJIXD=SMSXiwYk!`5~=kDdR5}j1d${@Re!KUYB z;24wE^te^`ZQQ>toq-$~QeR``zoY|u9}dtagE(|&VzNJ%r>V5zKffW ztSB}Rxwqc^Pw*X2&QHq+ZVxQW$6g+pHb_Usqf6L@n%$5(gOSP7LU+_JWMTykPlGs- zvlq|it?WGOl|?AFqV>w!0@o{RWy-Svz0cPxYx94}dgaMDGH5&K^$I%x5gQ9wug-+R zwO;K30E3g)XJ8ei^=c!vp!Etr8iJGN6_yr`SD4l-PITngD`X43$KuGXS7@`CzTkT1 zTMz6jGOSl!PjaJo9xLNYPdDc%)~DE-*l4KW$Y4S2Y7JO#J$g#lT7IjUqWcrGYZV=7w1&QO3+4k!c5N8%N@e*0ijntqeA@D z4OR)(#l^v@ht1@wx5TjOxs%9&MdG|y9a;@U1fY^v0$e**iRnjZ5)*q1nch2x$2V=o zQ%8AzJbfNMjk#$bK8b)+-~*^=Z#OUSXkXr@O6Yd_Cbsv!Nk3t;p82#qUHB;;Og@zd z|KK49gWPrv-&Z-QFwt&Xi3jVj4;&$9=#HcK*#L@zCo)(I)Iw(O8f+D-dp6d!C7bUN zvUb2k8wD8xKDFUIdba%Ht)Bfy^(&&){ODd(!c!60R`8zOwQUuDoC9k(GF_8`d=YQ- zCb^G^Hi}n91^Tw^9tLu^ND1nRk<@;j(EjJ}Lavr1!U50^Dq1kMe>mO~DeebtDL%0U8FV#13wuRAoW_ukxvpueR zzlbX-)C8Q_rC~3Z;b`Kj1V)0G^mkQe@L}92z@Y{=%%fGjSR?H4BAkeVHt?L8mpl~o zehXWc_1=#y%X)vvTPlOP)h+A!voxklnX;a@jCjv$63(dZ2-sW<<4d+l^iUcRSvNGYS8T3EU)bWWoK& z@%Z^$V3j|&ucv!7Pz!ECL_dgFCqy7)5V{ADAMQ~?p_%Z+Z+!3})b^2p&vs)I5WtDw z$(`TdkUQ>a5;BGhL4G~m`TQRL-Lhx6iW5Wz`gq}6ZyK+3doZ5|@qxcLP#mIN;=rqm=TfkX#b5!u*mK^8fG7AvQgs4hhJW$@91#e-2i_1iC_1cUC#hd`=gqvV{cOIyNA$IQr5cGQaN4~P3N-KNs z8XhZo1-<{31tSy4sMMww6 zaT!R{(|s<#7i$NsaVS2++5t-?w%BsOw06k#9M)vfC@%viScOoH3@u@F)^hLMl>0WN1EeG=K8!jOYau~dUhiWPdkW07ZV$4CPwV;mO<)wknYh<#O zeASZ2VOT}-Kyp^@ZL|OJ@yGJbs}w*o2EnUwE#g(HLJb|bL}2JcvgN=z0z=nO*vSIZ zr+_>#(WPjwZpCieiiaccvgh<`oj14e0XLkNG;-eSu7aXxM_JF)rK=yUhx^q$#a+Fw z7VcL*iO8_rFX20+v74U6wwHVg-tjq(K41=#drL0Vnod$yLUV2R(A$ml>S4`bH;OSJ z%6;rxs0qY+M!h)z*l|x0;@EiO8_a(d`Y-$AwlsA}sB_9~SQ1 z$JTL$d-+RnuI85hK71FmXFt4_y{Bi+{?*ako*5&Y_dfGM)}9!WT3>iRi1`n`@O)5z;rXEFh37p^#@rP>2roPzlrKC# zOK&Q6?P~;Kcfm`h`0fFe^3=oijx)Y>xGnl1WE0T`W2U#6AH>&SOjW=X7(+57{+kCM zGQK#Qv-dKbOl$ay$N4Uo%zX^}rfchQn`$89^>G5ZEcjN$N09p z@C=Q?_9%bb9X!D{+!>sNyO-t(cLjI?y?T8JuTWzr_`Cb?1~q&qq^A?U$8a#K^D{Ty zZ~*rWou@g+BmAk1XJaL%#!s;+elv&d*#Iw_T>A{%*{*r5i(A{4w&r)F6Y0(lmftBp zJI%9L_V5V27oEd~vSDmEJBl66j$tF%NOmmC9g>)hvs2iq z>=P@;uumRy+WDVi`RsI7z&_2!vNPD3>@#c}JByvo&dEBLoi}nkJD(M@A~u0d%qnJ+ zMowl^SP7fTE?^gCO=B00yqI0WO4)QagU!q;W6_bb*rhDS%GqUXc2)(OGjcAgWL4~P zR?TX%YT3MzSFkJDRqV6u>eH?{Z9cn}UB}{V0ZXujtd7;QBx_)cSR-pam-NbHYU2GNWX1A~}vDK`HeVO&L zTiF_R8~X}d%f8BPXLqnW**f+$_H}j_`v&_r_Dyy-`xd*0eVeUk-(mN%@3Q;Y{p@?} z`|JVs@9YQcLG}>)A$yqp2iw5@lRd(I#5S@=3m;=Y{`sZ_KUwfNd!lbMdlEL^Pq99> zg+0xlVO!bH*f#j4=nnQQdyf4V+sU41FTl4#``JtE=j<2kW%f(<3i}n?#eU6x!+y(N zW&b_$HTFBUo4wB7V83T?vOlo5*dN8o9t`gJjcqN-^HYgbQ*(1$>-lY|WNV_Sy{R>w zY;Q=^B_}O9Kb>e_luUP=KfQWp?EH#3H8o|`=g+H&R@YQbpBX*BqI|~rHBFNyPAZxy z%kg!o6l-Z+lz;j~`K_JJ&8c)d`*d_}S-h&ca#ndol%3IZ?itJ2%!=78zoD`-oqth2 z%bydwp5^Dy>1<9nbu4d9H|Cc$EorJxwnG(oM^#0|bo^%qw5iUorz)iDXzOgROCk$# zkuLe??aKMSeMa>YCf?7U$Qs zwKg;@>IBOy%5P|E&u?jKPv)l^6Rr70lL}G${MNQ~ep5@TIoXl~>(vt@hY$33vPByt zO)g2cay1qu+kw_aH|0?1u9#Vw-_V}?d}p$?Zn?4`J?_%P1^7)8^ z0yr#=W-Xl^>HLLB_%FRQ2{tHM48}~f*5?;ZE(E)d=ROig3&S8UN!F#?+Ap{uJ|~_8 zTZ4zjQCd9FxlD{320O@yeb>CXv*%V`IoF3DDiFP5#^gh#HPMwdEo!>79r|yoJOm8+ zRVV8YfznI@{hea2IW+X@@~Wz6^`X(4sA^!6Ce!&d+7j(Yq|?~n_>u`GQHO-pq}!8; zmO~;n63uOcc#$wx9THfUNGEDiiT1^ZMC~W4o^{@lWXE9PnOs;n;k zC+HVFk_y(el_jf>;COf~dZgpmyty^=s;VlhYoldeQHS(-Ze?x$^ed*9S4^J)EBxVK zbC$O^CF+X~pAm5o{EpmwKGO3qRyC)nu(0q5_xH$!?AV;DBgf3p%XzK!$%dxZWc~TG z5>3sW?MY9YnQfR_L0;v-`3VOu+-tPZH%RVOJ^txvW#S$o0Q6+|kyhH#i%bkkdh)L0G<*M;;pTGb?Vpo7^Ia@I$r<45cCdj}@;Fam=w=D;ggN|22>y9e2YB-vZ#`V-8}q<# zd+89t4{wJ%wXY29fN7#%LcvnzzHWDkCa2!2ibPoKmP)-@U7D_abI56ntzk_g8zwEF4E;d@u zEgU~95ziva+)==);+K&ZhOplcfm?(oLOK8Wtp04aCtE;;-FS0ncFt?#*h|?t&y8dM zot^X8IJP%C=l*f*ACcb~}+ResVhd^{~4m z@L|<4$3K5M>mKpY2>9@`(K)Z5&iYQdGaEkq{u9Ul?R54Xd>#pEoOnHyzs#zBFTx(n zK7MzE-Aei$I~FQtl>*))5$wd|QuwKqO<95%8L0o+$C1;sPAPy9yMD?m*;%h;K|&9` zVC?2d^qFk#xggQg2CDsSKF&J2H0N(w?7pn|Tu1jO;BiXUaX3chIg7FuqJXTNTE*X9 zC(nQI)D~S?I)OOc0q4rI)KGhMf`n(WKn>r)hm&96v_ICHCm3R}NAeY5Pt|Y|pxB66 zC*>g@?8TRlv4jIp=NoT+7K7|PadjRp zc#Y>8MPWM-&cA^GWoce)>eJ~Ww`TYw2yWH*n{8D*AjV*T22OxDhob1s*(0`1PFN|5C!_+k(Z?gL|+3k__*{X-v~iJluzY8#%IE6<@8mm&Hq?ILG}K~@$lkFFVd zsIvxVGFc3Sp9R0d0DeOeM+6*~i@-R^iR8*@ls2B&XqfHpY2c2CmN+ww`w~f3>QO-S z=;sYNr2IK31#(nWaXS&oaq=i!2tGK(NUkwRnq;U@_E0D}zx z&Jx0Us`B=(0_7o9V>01g;LdBi;Fq91lLq=0&WJ@>bhY! z>)hatho$suUm3C}J)Zne&@|Kf=dKe!Uk2TWOs$79K50u>nRx1xE$k&6!mtWf!B}hp z4jaI>8^jXl*tQ3~4{9|8EGl8_t|$viVFandr{Q2Pr%$l%%9TS{RJ0U7 zD&}u#j>qWJ|2q=&D|BFK@V?S<{}=6_=Z!;L2esSg2NM+i@t$w+ol*But0?9kSNv_W z^vR-o=;g4?IYCp=2yWaPZR@#z>O$O;a|I*v|E{039-sC9_WJ4eFTS>Ab^{DQGK<;; zfx92#@ec4vxR->O5IG;udIs~LUWlo%v$!39as&^|cBtlhTYeJdkm9FU}#&YS7jX0^LFJolyH zfP3wjQN|wLOYKMz@O&*kjZ^oet&CN$%1~6LTma(iXdmLNd|E8Rd|c`TaY-LgdzcdR z|F85XME;b=M~J88nvW2wju8|?IsV@H40e__cX5e3!kc&DC>tI-Z2DW!%d$I-=W_y|` zt&Iam`J$LT;`e|{VF-3WMIS^A=;@pd;_dIQ8~RvhHK+!4r0IpxP3cnI9`M7#{7Z{m z`8839B2J1awwV<@Z@7Eq`h~L9(ci85?ONanU6 zb?%V_e9bH!2S--4XRR6sO~4+W03O{va108QbX{9Z`R@n|PjqZ^0I2u#MA}{xIv;k; z1F6CP&IdIZxKvBCaL4)I`S3q=KG@F=U=Go$>`(P!Mu`q-xeUZ2YkOz?=`n8&WKKBF zmG5ZLJ@>KE5J@2Q*(P2S=Gg`8-?LYbhHMOz9JvPN0SlP*TCQN!mABw?cE32Y?idQt zexBe#$0axKY6vk`h0pyW8O;$2hrA1{{tZvxxHGsqKN6pOzP^9Ci@0K;QteiwBAaWarF_R9xZ3K;X8!& z6}?3J+cNOOUalO(pQQ}Wx_&zF8`~N$bdbMqFhn+VbzXP7L8&08;%**f@u0_*K;vN; zRFO)?10H8iZE6tLP~jJnwQ-h<*S3K5wx{s4Mnqf4sgALnAfeZ7nkTNDaQyLo(Lnyf zt6*8fryKg%I)CZL*bmsZx=ciGqY(?fXVp){#2=iYU?Tz;MWW1y?H~gW-sL-VN=LD> z!>Cu~%jhTP$6@k?g}du%h#BfH*(g6lwej3SDdDPtkP520ObBO*g*+LhXumBAKNgR^ z)XVcsu&Xye!_h`Iz04hA=#z&Z@WOm`k9?s3!zKJZqqH~-?ZK=c)1Y0N93VjnyWqD% zz;5cgbmq(p^2g0v*x8!y%r72aGQRk{37z~?(TzpL;|q(=5-1VyztI8rS=U#ytYvvw zpBOQ0_*%#~@%={rjw6)EW83M+=G~G#bL7xD(17ZuAr9BI_>Zj5zKS#HibWrjuYV?^3#EPTNK@oIwq`5UEDMzkxE9e4QDV+Icwx3z3j>C~^H`lqpxtj~Uu zH^>L*KB~vR0jcUQy*1J`B>QLBXbiykch>OYUq_QXqK*vwJ7;)}$A4sflc>jj>_;4~ zHuzGNw=a=oHgAY>3h7H%7hz+`XPLvNgygJ%(#0p%6^XQEDL(kCsCb=<|42Ub1Rs=h zS3vzHsy|kzFL&s7QN7JK4g}DT=EDuD>HJqX{7b0bCjY7o^l0w|B)=P+!e^&tqqrbk zRaR5G;^RE+D%M199nzH(`SfwTE%Mw*ZO1_AA-p=vuSNK;w0-tM&IfHjiW4*V z&a7U)NXZ#P^rv{`fZs<*4(d}z?Y6?bOCOvck8^h1cUO@-lP}~0?XARTrkBr+4v!tg z!!{m!s2*2R)#t?y{cw0)7cUzI-!K*E%-bPxUyrlzw$iecmvvVC+QvN9teY)E82{%|2CBZ}YPh)!X{F zHlTh(Kz%>eTl-J-*8bz-4%g}UkLvBmHK> zy=xw1&*DN*?ndHa8-tgro_`ZY_MzU<@x1{0QAdFgxNgFKBz?9B{wTkg>T#~BdYY$W z0h&hqU+}Jh7$3JfYv2mvW3$!W0ri`yzFyaZ5)ah#RjRk;ZwCYTkKxILeT|+*^)~tQ zsoo}k1=ZWe@$P{7%>nhVQvD3wJ~udiaFFVs)9Xb_#eIFuF<3!)u=E4X*QZhaS=dO{ zYkoFApne6_Tl-J-HvKnKy-ojDsorM)gH&(Re+>UZ6oX&zF!yg7)!X!+PxYo;5&d%o z)m#0a>Wg*xZO-^@rusAV`UOt?t5k2Br*BgKgXZa2{x@qG{8kBEa-3hwz-`#ePTEwHXA{*gw$pr8-!qDA{X9r~Z2cSq zdoH|e@o5^>+x&4p)tlxtkAGBev(w#FZ;CreznSV?c7(XI9EK_%>bFw=Q2r43UyY@f z4~xScW<4Xx=SF7iVx1lZz-QEGaJG{mKCP^;B;ggFdRCuJhOS>AR`k zW@Cnb5*sdCeLmHnjg917NILqLQoT*T1ypa-Z)Je|^#S#LRBzL7H`Q}9Nd2`lJaH(+ z*tvTD#8#h=Z$2Fmo~hR-wEk1QEk{^D^|m>%lIq9l{I&hqda5_+hcWE|>fdc}@A7e6 ze^)tr?jb%lI}GO=KD!;pQN67nF{-!qqcH=2>_>|93+l%P;$w?B{Zwy?2{>Q(Q@zb! z^Gd!+VlD^TQUmGBQ1JzsmPxZEO+8;olcQPu* z;5Y2xlKN@!vXJU+epD4upQ3skbH!gfD_%?WwwS*mfPa5L{r-UZywRu_oo&nhYx)&Z zy-mL=s<-)9it4T7PxTe3gp{9sDR&U`-wjk>qStF@Wc^e>Td&v74)zDo=W)k{9~jW- zA(r5hg7OQgo=;b)AD!jrLwyz1yY$CcG{f=nbO4V#2f6lL-q4_M3jqh0Al1?myGTko9MtRqsY)*_%Czqw!_XNB+9D3HA1V!g& zrXcY(@SA-#>7t48^0tn6CH%x>OIv-iChqB=ja3=%s8_g$xF$WZC6Ov`X{t#VHzzwf z%3Go}iE{Xmf}gW2pWV_FjYb6{H43OckaZ-}Qy7mHrPWSaQyZ@YDZVaG7C+Tk-U!3c7>yd7 zttRbhBgRJ=y%_CVUfme2G~2sYYFSw`AyEF*RA)yc|Ehfd+qA>4>IF7$h zT3$0bUa_!9`nX5G!x0o>eg$~XH?<0X*<&KCP%4-Fx|?nDpxPW z@L-v?=5RQW`iDD^QjEDP%7JNu${zIj5IfOg)Lky&6-SwpG}6}@{ZT0;tBYdZO z-qEi~m&D7Gkg~QdFRyBBj4r8-*A&I8VHLOK5*gP`drsuBXwd}y2c63?XNWE-OYtG8-IwpoJ3o+Kb#fTBF#K?19x&WUQI;hK-)-&Cde~AgZ3IK} zwD^U~EkZN(`AJbxJf5hpZ--Nswg&f70}E$$jVVhr=OYTm%*Y(18_lOSmIP-aOzZk2 zWe2c2!H*}qHsELpC%K{A#@&RUH4G-dINa>QV5Y%k7l)D=xloLsOsDUM^fS3izj zALmDSO%3tZHagf$K++3gK;)CqU&wwZ#$onX*A{vE29d&+h)$`e3>wC231yVNULMX& z*AhP0nU0u5(lArw@kOnj@w#QpiYB%umrCQo!3F5YG%Tt4_FnXiZHgutrW~w znXWr|G}+?Z8k;+e*l& zIP&y86wRbhiP|(lM(%m9060&G$6FGMlm2{JJ#~V#86uR(r{$9<@a$-mC(-U6!MO=A zbZ6pqZK>sPahB<30^<$SxKZ$_DaL%9pGL!y>E@bg=Y|tsc@PY~dF&@EFLSm%mi>irb57f1dPSK@X-A&+G7aeGNzEXuf|bk{N}yqhKQH6Qg{G`bPs*I# zY$o;8ih@}@U*~17>{O_IrtCp1$%7o$AZG5J3FIT%L30=tRjP2vdI1NIG81%VTtP4> z+Ty{TIJOTsNeH(@lL()qQJ6hBFMz4shEi=akDwLI-1yVycgWO8`QPJ5s}~3-*kBF+AUe z(dQ3)59QUMNpke3`Zp+MZ-g)h{i=c8v)HhgWBQh1{|W7IUvJodwy5WAzJmtXPZyf@ z)8+i^1cE2+wc)W|YPltt!+|hGb6D_wyW5bFFVkrPL>RNF%oEphbmL53;NyLEIWhdR zOPJ4aG>LC}P4^CIm_ECG?g(|?%{1z@gv*%?)|edL8sOhGGq^QodaMDuWN;ohixJOC z`SFYse`bfVA%tmH@^Ux}rylO%)mi>>k1KtX5i*p9?g2S6%DQ>#dQXC2C0+o|kb1(T z!LvC$h7)g{;wGV*z%!0(uKET2NPVX}tfd@l;(umKT@r`P? z+MqR95>C#fB_Tx?W}E9^CbJnBLB!R}X0@7fLbRA~(2BX9?kryKWL0Cu!a_KsQ9Ux9 z3&6WNN)xUJS^?IJ$?fo0(%V|%iMl#?k4JrZ0KV9@D9YdefYaC(d_V?5E`o>xZ%7errWpnoF-J^wx? zwAc0jeF*vm&=#)|qTv016Yiznvb6QTndo%+zYAf%w1NH)A>^+x(7zReewBg#k0I!9 zHPAEgA!#>R+U$3yfj%n){oMxo>=5+#8R#P+=pQoB4+%lP(LkRQf_}4seh*;M?y|Jm zf2)ChZwUIG2Kosh^nckv|8|J^^QwWqIE4H+4fF#ctOwzRW;BG6a2vf&SPK^tA^15h3X38|aS-L0@m6uL?om zY@p8#L7z6z=Y^oh--X6YpTEb2pkHO69~FZBRs;QsA?WWk(4P>3{%!;P@geB%Gti$M zg8m@`{a;}`JXwJ^rS-?6)j!{eRg&9}hwQ zs)2rD2>Le-^pir+?=#R(4nhB(fgW=LX*XHg?03*W|F;nIn5*KY$B&Cc=#R15OMg)a zdW0KPQCzW&{1)5cFvS{g*<}qp#ql&)tLeR^< zoucdC9zy@I2KgN!=+8CKr$f*e8|Xg{(f?@%dImY6w7V>A_LqNCMz`Pc5c*dbP)G`g=mqpKGB1b_n`n1HJk?3tApvn}5>`^!J94 zUuK}kJrTjGw8^h9(BB_|zScnhy%6;C4fIEcnE&+#`hO20zu7?lUquS=zkMJewl&(*bwq74D|mULVm4*{i+?K&^nVCJzsf-WRtWlA4fKBuL4T)#eoqMcyAAYsCOcUB z-DjZxa|rr}4D^2uLBG*J|4s<{%?5frQyy&pw;JgG7J`1Kf&POK^e-Fe@o$L_R{vKG z^nVXQ|E7Wd!w~fQ4D@&=KUn?WGthq&g8ra^{^JnzL+I}}>+64Ri11{~5IP_8-lHZv z59m$(KVTTYmw=bI|5uTGFW;Rcf3-(pudFtU{AWd z89saU|DHvD>mcQS$0EPfApaGEe0U%v6jccM-7UnBadz+1n(_Cvq( zjtREE%Ao(R0r%SPJd6An2dRIvh5j|7pROwp_g?+=cPjLzDbin$fB2meum1Q<#$>-w z@jr}6f8SGMjBWMnWefdyq7TylMW8p?f4xEf-+^GS{+Lsm^iPrep!uWc)Ox@A4deg1 zL4E-&+$Q;7CiydUrf?7Hx~@+Gy{Z3uNPdi3WBmO++lKu({{q;mo%cvRwul+9vdQ<;b8v2j#Uwixis73x(l3%4HiyN=}4Ho%3NWLCF z@%>w`{6AXckD4pw1;w8?EbVL0A{_P~6{tUa)!Yltp3;p+r z{#ZpRZg8&Y*Jx14H2)qWdg*_X#w-5>pf`S`hU|R|3;F3dVu_|S>*Q{lAX^qYx3$p7|P^xtF9f0RN0vyV29|0{!(e+JN-#*gI)Pto(IlMM3bS>*30 z`LqpDR`mK`l|}w&lCQ^~(FXZnu*jcQB}97Tr&s<@EcBNV{aH$LaRVy2u8kJ`V+Q+u z!l3_di~J6Y{$BZ?I>tQyHxvC$E^Yn$*HeMsH2w=n{{=*k@&7b~{-3qTkKn;DT;BZE ztADLUexG6d^9}M}w#c7G@?Y=>^p5|F7Ww;0{%)ej{udbJpFF~B|D$U}|AXfL@j!2~ zfB!I{sXqV48ss-xT(n$3lxY8P z2KmEAn(cot$@f0L@XC){=r<11epds%Y5W$D{`&ZxW6=NG7Wpp>QvSbLaO-_I=a*BZv}e1rUa2+#og&W|f<#lQ!R-$D!hbwuxt|0qkp?y=A}50d^b z7W(T4Nk2Z<-2c@?KSNg*?!Eqd7SNmgZ$H_;kmzy#OfuL%Ws(0J$$u_D{$h*#d=v=R z14NG>rx@hFX_0^DJV6+ge~r&G+iwHWd)IHD{ea$Nza6B%K7TJT=-*+H|C>R|Z?(wZ zZID0BApbut@*`IW`vv*`@yD6%cRbP0pz)K1*M1{`-ekW6q<Sx2`d@94UrX|X z{BNE`{y6-xA-Ht^n{JT*x<&qJR|>_0;?HDg0Bn8ntB~k}{I3Y;P4??2{dNBV{Ukpqf4jsYf3!jVY=ivy7Wr?J{9@H}apUd(l@|Gh2KjRg^1o)0f7(?--WeYG zz`}KX)gnJ;kY8z#{}YS+nIyl&B~AE>4sEo^UqJHp_;a~I{)ACx|64)wgZ2;S0lmrp z){=aE|4?I)-(it|+0~+#LH%#F$WM(Fo}%}Eo!LnAA5sqv|z)3KlQT)`HL;`SCRYzqL+nN z{v8(j?-Bi6Nk}EyTEA|y=)acqk5OZ^-+Y7qZ&>8NNAiQ_?|)n5?=sl$I)nWDlg$2e z>U^PiLhmfxd+qlLpf~x?ev+^I?*fDTRTlXxNIo2|xGt~!ofi6Ah#rF>4B|A6RAUDEva`xelf?3a%}_6L{lKS_iAM#BWbK6&5YdYj}YI2Y$1ul-H{ zdXxM{lCO{7B7^+J7WozQ;$YDDJz$}~g6M> zWWT!%d1K7||HlGB7DV4_p+6xZ=!5+4c?*33(Fe_+9YAlgU*qwjr+WNcVX)sh zpEUQsf#e7I-=)#Jzq8Q4Mf5@b_Zy4;Y?QE{?teEK z^iQ8=w%`7`!TC?0h5qPzK@Zd0bqTE;=n0@V*?$-5ug9NN2K|3wkw2E?2d$skpECD< zJkb|8s`5Lp{{OV-zu%z$mkj!sSmalc{Gj>QZlS-9=u15Mg9@&z1?Y#k5b^>xp})96wDHC-Fa5g~`ieo)&;7Jn|Er1q zY)4go=apX$^d|o)HQ4VSgZ=s}@>h}kpz(XcBL6Cb{PhO;Z&~EuL-K>hZ`N3|{dN!1 z{$I1u|9Oz~Z&~OM5`ED4y$QwICpZ?IqK8Rq_F)eZZjqZ!GfbN&cBGY5wz*e_H6jO!Ps|Zw^@W-(;}=g9iPlfr4lg z@A=C{k`Lj*b$RD+vxWW@q95m?_V<4g(3|YvZ_xi?gZ^K)$p47s2aW&j7WsP&i(+#vseMSe5M5AwfvE%F;lzV3gU4f2;kfHIBWKS+Mi{_p!1`XQea z!#2}3dj9xvFVLIDuk;i#e!BghGU)#&i~LJTzBhlszUtQ=i~JPH*ZpUULH_Bmz?$s0 zkmLvDZ`WApQ$!E17q~93|F5yo-%RvD=T|?r(0`NY&vQu^ebu2yfZjBIs}1(sX0YFf z7Wq3!evti&V1sC~|0_g)w5}}Nd+m3lg?=~D7X;8R2YOTg*Bko(oT2|OTjXai7J`HH zKM4YqssAI0K1l!LfZnA4CWHRZ8}v_DVGxSkJW|2 zy?6YN1A0^c`wjhn$<%*~{3Rs6#3SF^|M?dAdq}<>|9)YRzt1B7;X&H(it%Rq^;zh> z_UpFL|J*|F?f-ig`ZtL_X#D;H^rrC}eX7t@kKelt_NzMI-2dUtV&H2kEL_+77WpxQ{DTJh=T0_{|JalebDT?> zfBmho&`%=zV?Fd<{a0D&XA*sF0R0z%-sFD^4E@LC!R!Bj0D9Ch;*oO~$(QYAwfFOG zi~MB<`S_D2l3x1dU#b6vQUI0fN&eX$T-r~T{~&r#Gxi+OdvQr8@!Tn5{KagMC}aIZ zUjpyf=$F)AVn+kL$^L7p{|}rfTH^e}98=QE{-b|+ZI2YgZxwX;z+b<-`r~J>?$~}$ zRJ6>yOi<(35q=JkSN>5@ZIXZBD}w&`8bL4r6{!4VFR|Sa_ScV1Eh21-2?jl$vEW-R z_|JU!NI^MkzoP9HuFkZi4AQ>jH6l&H^cauWQ# zAG~l~!}hYBEN=uH+pougfeU|g9j`m!e{A2*KQVR=mEVUF+pio!0Cjj1e8l$OBKXr( zz5pd}kA{Lv&bv3@9&veIChhhC;c^|4_z<|k_Huei9KYj^IJ}m{FNvQ;IJ|D;!tq0d z|FWXM^?xJmMg60?kFb7qFK;g7{2f1$aLHt96?eT+vMA%*nK48KBWWoPp!T)N(-?iX>v*76M z{wu-`_(4D-?C%!*Lks>-3vLXPz&}fOV?`Tb_)9weE5dMA`mYGfvEV~3_;3q;v<1gs zR`FjEcB}=@wcy8D@DnUJ{-THfiZF~q{wu=p7cl%+gq>=^@fRojSA>1if}du=^DQ|3 zB7*;lu(1~WObb5Ff}d@{@tgGiE5d&b)`XvLX5P+JsNF zw7<4q3CC}g`L77O#)8kc;MZC31r~gv1+TN<^%gv7!SS0q{wuM$5!PzK+bsC!EqJ>H$8S*huLxUW!SNdl{wui#e(CT+x{!UdMx;tEjYfx?7t%HHVeMif`8S5-(kV=%~$^wVfaR> z|B5htQ`CP&*f%Zs-4^^?7W^IyzTSf0Yr(&3!SA!+_y(Z=im>ln@CPjT4=nhD7W{`6 z{9y}@Z+iK!2!8|1gm1L8$2Xq*SA_l8g5w)T{wu;Bx8R#C_)jf3z5(OE;5@;CKV!kS zTJWD)@NE`+hXsGuf{h7W`Kh9G^J*uL%2% z1%K6ozh=RATktn5_?s5|EepQKg1>FS2Q2uXEcl--I6kTIUlINU#e~0SY5%?j$0q^) zE5iO^!4F#Sk1Y7d795VGJQuE{cutiE&oS}3NE8es5}qT;zhgv`d-z3w-Ub<#^JE|A6C*eE9D0;5?AedT%A1D|#XR8RDS@=abl12mE~) z0uU!HICoNCU4(JxGT_`P3^*S&1I~?Sz`2nOxO`~hu8J@U{%#ohb*u*wA0sT+g8Snt zHjFTTTow577Ct9f@KF|AU*()8a4zb6(C#A4AGfg@&P%mc&TT|JC2}ylgL70jK%XM& zDUrK6qMj0Yaru3;t;fKGuStVZqO|;GePJ<1F}D z7W`}revSn{*MgsC!TswgHjFU;dMa@LdMfZDEPPjlQIh7ViLi+tM0|{}VhcXWg2T%K zh6~P<4Jh`@zrJI`hOPRS`ozAaI!l69XzD>|!^d@JlRssRf^I z!Tos%HjJ>DmiGSqM6{1u+Rw7!ms;?c1uwVYms#-H7QDiO&#~bC{0bYw`MITil?A`t zf>&Gc8Vg=)!RJ}f`7w;|CrUm!!i?Lxuy|v~hi?Dm#0DX$EZ(H#77W_LF{9X(GT?>An z1;5{df6sz{--172!T;TY|Gef^V|m{&N^?2+z4J?VqsVn=Sa07W}6c{3#3G=fl5n4E!Ay?LFAzsYMsZcc}I< z1N){0{}IQZQ|)EOzukiWmg75BdzpcKV8KrqfqFi#+RKb*BH(!nb#7w3{p$)imF^N8 z|GmOz(%tnIK0Um>U+%wiykGGdMR(5temp$C=%de1Q~7JakAvq3`Scmzy~gV!YJW3* zeo4UW*pcRbod`Jc_qIQS@Y-y_;ArAA$%01#FVNnD9Z&6(7QCDITu1!dsC0X{TBROFrcaZ zWDDM5!EdnOk6Q4jEcmk)e8@>=Jx{dYRTlhe3;sO|{*VQK6L7TujB|yl>1&AWBf_s6 zFK~I{aN^0L{WijzX@t%qe8Twxpr2!4vj8t(C#Z2BL+#_#zM@C~TM56Ow||{JG4+Jt z4vstTX-mKQ5y$=O^-hkTs^rQz@G-}o_q5L2x^Rs}Rt@uFL;n!l0k5hO(;V*F9A1D9J@pDvrspqG`F$&nbMD2`w zisR?`+OM^=|8I`}P4SU-KK_%)zew?s`p@O~`3jf%-^1|_6dyV6Z*%;B5C7C@$p7yO zzl`oWIPSb>4(jpi5lj1_pF%!Uls+9Y(FC6#Bhulx2o|UTo8PxtW9CyC=A^UX= z$1hjyrGGxl@fwB8IPfvY{c&deSd=?YwU>MzSaAFu$O3kq;sYP~Rd}YE&&7b7;^Y#J`{UtejxSLB z6U6`2&mfr{K`|8H}=-iKE}B2>VV3NIzOKjyeU?(O5a^ZtK= z+E0ZERiM59FZE1u+z<~r{y8OA>iGu87yIyuXCwb+g-bnqIqrNPNBZp+j!#tWB|hRD z+`34g}+)2>%Mlo$m|4vdFJz zIPQlJ_5{vwWFtZ>=iJ2>uquSfQ)--3@EkNj6EKC)kx9KTWFvR@lGev`sw zzb=8iszCdGfz)#)$Nll`VUDj-d}RE5g5$R+T>91TIPQm4kK!Zk zGn?aIR=A8OFLB%-_b!3_uYmdEUMI(IReWaBI6lI0f84uZ0`j>{wU>Hc1Gp(JE$8i> z?>m5-@#`xb|El71G2u^g{0@c7comt5a@Q#w)Z^D&jyvCXknQ_8?vG2S!9r7@eGfv8 zS2@R>??Fr_{u?>&k7M}zCI#$nrH>q!%O@f3d_O|s-{JT@sy$3|ehr_D?fr3S9>>?K z_EOJIj^C^B>BQ$njyEY>`rFVc$p5ec>&#U&5&&gAfkMsSe3#ngK7QBb!&i6Zxr}ocq`~k%u!V$lYzX19FK;f`# z@#}1kKd5jB{d_gYA67UlEBtzZ>v2J_8)@Qn<9kxtAcHpDJAXc@@X~arjz} z`{VFUfSc^Unzwhp&m#T#8IJqoZFwo`yR*g-bpAIR31{rJb{9ApdVDT zJ_8*0&zIz-$j3h~dN}U)=dB!nRq>bOI5~!V{QfhKWakEszoBs1-^gXy-ajs@IsT?h#KPz1F88a8#`}NMl;iKK_Hk@K9&Z|PX2UL5h&utw4hY#P$@q-GN z`P&B^_v?Au<;dTUM=f|W$Nl=>Yr%I}@MEh{?ng?`(WqFQ8e+=WV$T5q^T}BH_?(TNmk6MiI+vM5Owq+K6m<@XbnOW zilBLPSt`-m(bU#Dqb<>1k7PxK$>>#8@fnrVtIIg$B=ymuEt=SoPNX|KCV=#&)Etq@&!j|s-MrSOv~2b{-mDnVcqhWLC3b3JqPe-PE|G3)k0;s}K|=s1H!W&y zYfp*~MTParhGcsjS}i7|DBZq1o^I2j!bE*rDy<7|MNf-lp#;a>;VF0EBpDU)gL^*s&C7RmHXSXy(qfxDGM>1XB;%eHW*H2!O ztOLg>Zv-BV(Wq3SChe)vI0j00n3Tk;7sk`=$s|`nDOi&(DvZ}8n?W=rmnH;ZJSfuNIINY`V7%gP%1K4qDyu3cynr=!jN4x7I0A}^6JTZgH zLChQt#mLsACpZ@2!7JXBPPXH;2UQlr(3Mw%VW&7&b84#>E{R4fYvYx*h3Ncqq1}Y| z6@2953lkklIs6WaCU-P&aJ{u-BXhk&e>fwhq@a^)7H(~;Pg>nx6BuOYjQm}5MUI2n z#(V^7isC*~XBsvTUOn43YGR}^Nv(;C2`^+%^vgC6jDzAZYX)f4B8O%|J-C3fhdy_u zC|D{MwRXnqmMtrq*qU4#R}0v`W{5Sf5ut?U<)Nr!@Q5m~iLzE4{gO{A@C808vD%rr z+-)IrOo@A^q!{P`X24X?f!h?xxon*C&^e=I;Z*@nS%psNQ(AY(06h(&rL)#d^>y7e zqjaakb;-mL)(Nf?u3f={sd;yBERpQ^+UhsOpu{O2V9S;^NHA2uuHyREh-iH1vq1_7 z!vP#vl9|RBmXY%6+0ZCjmVy;S47s=ep0Oz}hn_%20z`_cb!khL$d9~v(*(+!ym*lz zpOS6$9E;i+b1Z6atRp&W{>5qIi7XtOras8eWghF5QN2xf+1^_3;a@a$UaGk*QSVli zJBiPXQ&XKCjSxob7Dp=^jU%A7sGiN66iornt&r6~|K}uH6N{4Vlgm5Mn!>YWKP@{L z7LO-7I+E?_ctfJ8SvS;#q6$#EI=SeIM001dV^(`x%dDp6WVEJ3XjU{4(jwU3G{9aa znP@4mgP|;{YfQ95?wf$rzq}6S92sMFO~<4<*bub~op8{DiHqB?6IHX3@x-|9BV2)| zDT|Wn=B8HIkJU9Z;9b{}VjUfIiPi?Jhgd#U$Y^Q^4h1UUi(aS^{Y zel4N-;eHYrwjjq!Six)Ku!TU08rSNKY#|G>saY-9I{OkiL#NDw=y}D=%4n5$*IiYl zEd?ztV*Ukhh~@0Fjb~8(o9*ov5V+V2;7N5v-DCyZnljQ1`oQcPA9ZJs<5uzb_!>OQs zA%T2UtS08AASlv9u9?g#Mwgf*N&gotQ-N&KZ_cF+6saVDikaSy&De2KrkIv5_@2x3%#D z#;{t+xN~SJz0;HZ zHZ6Y0cjl-t78pengF{?5p6UG}?-SXxN>a&M)tqO(DWeYJ$nN=ep0FWda&}Zs2(9zeEw0mmUuHBco#pxPX@KxKd&L zfB@!A@QEQZgTrjtRAf5mvE)ET7YfS8jUE$3t!k@`O@W@cs>pPf37G`pSAZCZ8 zL8c)N5}0vBTfAEca1uja36{$c5+`aQQ4gd%6SeJ{jN6gSnL3=VPYCmDB~um-UIz() zrL!W`$^-vQY(S-=Fe+)$B52%-Cc{(|+Z}w={P|8;{_s3dPHCI+dj20moF}snL8+2) z&`6Pi=5?@DhDUV#2;0Hcu{;=Aa~9bvJiN@{YM#|su|0%i2!nmq=_%fr?Te2@Ef$tt zz^ytE2gh31-s^C>qL1C-h5w+jbPch4D2w3zf<%3NJ3I<+YXIws>BFCcLk?42Blcgw zU@%WSWthfP%88hRB2__oFs+@%$J{!o9@e2baPCVvAS{}VbQEG{r*>p|K1}Jbdp=~$ zK|Lon5fQ)SG{Lsocrekl{{Ewk8%f!?T@+ z@~b-9=fVa9-z-sCc)T&$49^qb;H4Y8F78J*Eagpx>CF|qj z`B(!yK20vGOTv3d3D~khJQTYcFdXdNCdMHQR>Q6tj_T`{CE{=-5Qq1k>frRBf9Bb! zMEFkAwo97A-#dbBAvnMi+U^jO_9VO%)V4Ilwui<+ZR)@&4kxM_vspc^4Jyd{GF5tg zMn;w}j|_F;S}r??&5#O;hhvZun0oC^iyG5>Z=g6iPuj&;sft5bl&64*=48XaP(slp z9Z3Ufv@q!HUKTQV^rZjO-noZIRb2~wRPe!D4K)=X0kL{5 zl_Ug=_(C8c4-p}@Xe~*AAV^XWqJl3_@YPbq8o^djw20OxR#fUURTO(KR-{Iw z74N0JRPYljO4mAP?U~=4IeRh*^uK$)FOTz^HEXZE_S)|~XE0Hh{A7y_cStA}T=uA8GH;Q&W4Jk#%`>IR_>|dJxY^jN zxT2!AYD#tHbFTlN&CU6o27hSXjau$nsU^16LHp~@&NH#c&z;F;va#!6Fz zRbOIz9U3j2b?vj_7XwmduGKNN%$xL2Q$?IHyNVr2XPa=z;U#XZha*hi*hrc}-3^LO zq(z7NWgjOeWf+bJZ%Edg)H+DEOmed4m0L&+<=d^f0XJCc^2ZbjS|VUW?THs$XkoiNL`nH&TQw75?I#KvXn=t}Xa$)3|@+WLvk>DA+^ zYO3Uf>NsC?70RH(jrC%^A`NM5(qYE3&S&MFS|E`=J(o6u{bbg?z*F{3bKz#XF&~G? zsgA{XD2vKun6zMV)L$Lxvz*2j+3KfM#9)-^sZdPI>Xw_N#MQqv@z`ociRK%hbZC}( z*X$HBD`IjMA6FyPW3D<%o8F`w;_H?3yMJgWA67~YedH#G3AYVJC)9)=0?MX4ZAz#! zXB{VKwvtV!chV8rlndse@iUM3ExGK|LC(8#&4AkrO3Q*qbo}nK_voS)r!U*7iDp1=FyFNTXUyx61g$-H9uaLao|{T6eR)YHIDsddW4sKOQO7dV)7M*Iro1g; zTXASxvxYmm5pzYbXPu>U#TlFl)$Rm+uP)r$IWup zDmMs=uX3@a!GpFk+zmGdT5{C3*d4V!C38aDWG12mH)(#P$m9BoTJ{u42ex1|5Gjjj zB}6BlWvyLD#_qiIJ~Sq&DobFn?n}w087aog%h6S&y@?d2CIy4OZgh#9^^(BRlV>eD zqb;A82+wGrni)7uHn&V>L{jb}4}UwC+gJfknG`N1r}dsnOyE049wlQ_vm_Q;Z|c7es#1xnMUOTRI_V6cH8-IBc~hk&Nd@^p#XUm{JCuxtYVTMj({62?BFp%x##8h}4^#DO{$VOc+JcRgNUPrRvfUeRr$EyK5Qr@p)B=MmiNN5X2Ir%4q3Adtz$zdeYBlr#2fo==373Y7k1~lO^9OkWfXcc zsACG;Tig8eq-bqxmbcQ&d@mfAu82PDEuC!m0aj^wTI$Di^%*Wri_aLhdh3zjt&w^p zMXOtZy6YD{uSv@~ebY}jt0ise5zkGD$*0qbdbz#A@F;@}J0z+_P)=Y5`+$L(s^THq zc?Bmf%VfJx>VUXSYMq-ArVZj{UsFDQ;D)^JF(J)qbjS(?;a8XbS&$VrjxWf2So^thRRQc*uS9Xee~QFi-WDN31zMK&VE;)=|@ zTSgWrvgVdpaYl)06lD}_@etSRxq^)qE6PDE&AYN|5?5N8%A@ZZ8dJtiy-Tc%c~`J9 zoKbB`f+7mGUPUcScI2et;|gULD_M-m6)E}5L9!%*a?tXYabch7vIIW0RvsugUOtbI zeBMt*UDYLJ!4i~gyw~cXV;SMfTv`q^%kWQXq&%EO?FwsKsXV45h?^39(qcGDtC%oj zYK1&_a6(P2P`KO{9DE}A&|$%2bVst zn7rD!lV5sB2x^QwdB+z-t!J>$~d*JBPQTg^Ecs?TUo-O)~aeZ{C+PTBzJDEbq zcN=$4OjoW?Dc-#&yxxZV2Jl_rAA`5EXO*fSJ~A2kH*t)I&oHik^eMtF-ABRoX}gZU z;o<-1;cX7k)DyvjSgEJ4hfe_4r{TJE>%pn#WpK)W0#5n;ERNJ%@}oSwFF5s|3%(V0 zE(6!67d!i(^YB-}{|xz0jJvpPusGQk;qFPlUqtvwE02FbzdkM4+0##hQZ5zKrx!bZ z9{AtECxh!#jh*~L@a^DF8h7?rm_5%yUY{cD^lXgC*O>ff$bSL(BMuDA5A4^c3p+hU z;9r85fveA){G}d#IXKJZDsZiXPS5cNrR-6YTiJt%Zv#I_^5o=~c=-F^2Sff75C7c5 z=N_E0=Md;Av3612OI{1!2J$z0_!988kbly{*L(P8aN4sST-!9~w>{wP!H?BIlS@#d z19%^B>L~-Ko@#LFc?O*R*$7TQYzN;D_O#Q6SuVA+BX}2Z+Ia#v?HmkFJ0Aq6o%%h) zdTF|}^J8$@xf`5zwzYmz_0Y~E!D(k-aN2nTIPF{pPCFaGX{UZ~uwGGrZULvAJHTmY zp0%&4hjyL_u1^_vaaiKv13Y{bxIRzZ>ABI`2~D>(_&wnCf9H;x+c3X}LjHR2!@ytj z@bw=4m4_c;0~@uI`g?eIfAGU$&-vha;FG{RgWqv@klmns>9^kU{i1rQJ@nf!aQf|a zaQdz2TY;KD5A!v{!*B5LM?HLvhkxkdpM%qH`yG+8lYYwwr{8Y22mh;o^y&UC-WGcJ zL*R__RUW?9!yCbw?hX&%1I~W-{4S~d9*B6T1mA>w%>X|F@`H{^>B$Gb09?PT)%oYg z;75XA3*H5MHMsWs?X2E58rN<>`E+@YURxlq-!<#f-3fj)_}39VSD2pG$AzLo^Khn6fXSV6-26^h40)uU=?*gP^gL&JMnIl= zF7)uR&~vQmNXRu2@&&?OInD;}3Vxe$wWk~O+zI*PAb&UHneI}^GuLxdGso9jz?;hZU%U36x#~uyNe04LfdYG>hAkTdDggo=L81ic87)$qlaHhK)dYJB` zkY~D2L!RkwhP;caH{WNg)@8#g^-^YWqU0MjP z`EvdH3gfO^3N63SMR>9CH4$E7{B7u`AKv%yO%Xl)P0yzu`7gma9@rhxGg}=iSF01l zztK1!1((2AMtAL7w@#6`cLxZ4o_gJg^Y*)N?;L^(>F*S#0@w0`kag zf*!`<>yT$0{so-<>0hCT@&7sG*`Iz1d8WGu@=UkGzop8HaXSE9&RV$TLo=!5N=*(8Ktg z1$oBjb&zMeH$k51-UZHbd=NaX98Zof_krM)*YAVI#)RGj|+ockuTz`4Ir@8SBr(|W1?ljN7HN39D3oWXl~_=O%m*TWz2 z@C_dRjfWQ$rR?N>N0Eo04$ktb0;fOcg43V(dibZ{wC5il-nuwtKkYf$xYl>8qJdy9 z$R8?WF;`xtkUz}EX!?dTz^SJ{_~DQr4E=e~zomVUd_qDn(HZjHLmb43wpUwCPQFe! zxHPVmZ!_+`cQ(pxIF{5CC;tKB-@1iBo_uteY{2zfOr3wmg456W;FP!SE<=y|o=&y@ zE9fWJZ;5p2o&^1>%yFi>Ke)L+NSE?QK~Jk3OrO`ul*>&QcHW>)~gBGp^1Ar=L#)XS)47yuXK+fivAf;7oS_ILmi1 zxOEpnxeNvG3%{KMZp%f1{BZF8kRJxl{GRLKBfxFBH_(3`IO9S0eqEe19?l16x}!XN zw1=02)1C{!Z8LP8Zxg{s!5*et1%3(SX+PV6+ab?(>2dH$(DN!d zCF4`lmqt4#?Afp2MO2FGHU8 zyKj=X%KhE81tKTZQ;xd&Ty-688Lm`y8H!+*j>0BSL7vO9US&qXYuWOmEy&VHi`AajJMU`jJMx`Gu~bYXS}@uo=dz@e=hMxe=^>fF8#@IApJ={Gu}83 zWW23GzH*5-`rj9CY;S)L{fxu49?tO+JC-7q-zY(1FzX#qO^6!IF{sVBz{~4U}e*x!u8rwJ8$@Yiq zLYtt6`WwN0`ng{H5#+i4%=VN1XMa5u{`oKH83R5Ud^|YY&ne(sf8aQc{r+6Y`_>0G zBVGF8zrl0y=O>W&>7hSAg*^Sq_JRIf26_5(3;4gnpB%sW{Knh}DAiw0pzz>8T#smF8&U{@6JqN&_w7)&{lXn1Tf7%gz0QBpbN;e)b z9PFz~vWau80u@01ASWb$`+*+}UI~5(_#E&y;7h?ZU3WFuKg#syRJ(7qzm8A0`@nGd z-|;2Jzbj)Ny)@1D?SH-RXaB2wz5=_3K;HEc`qCuGyES3uw}7jz28D7x9N{{GpZ7M8c)xc)Qji|B=Z% zJ@zq^gvP2~`p4A~yGbf@QcAK!G8ok2Yf8}Qt%4!2JlMoM(`@|M7!`t?H>nT06rePANU0DO7Lp% zIp7n)mx5mc-T*!cyb*jdc%prHqxN44eu!}`HXRqWvvCzazdQx<=Ri*lcnx?h_1Ayi4wfp_W{-l&~dffs^b4L%b58t`f0*MctqzYcr__-ycX;B&yYfnN{4%eaf5 zLW`gLPN9(I>jub|g3kpX13nLYCisoucZ1&qz6$(i@b|!P0sqLjv;R!9KXGU%r1swm z`2z5tfcFFcDR?FLeDFEoKLcM1ej9iL`0e10;0wS%Gw$*=-161xuuw?zbqD0TgZ~_S zAo!i&6Ts`i=Yih^z6^XJ_-gP);G4nk25)tEc%%0J0=zr8n?vZ!1Htcs`~>jD;Pb$j zfG-2T7koANec+qHmx8y-3vbl^`@y?|KL9=u{8!);z?Xr~1Ah>F8TfMW)!+|-zh&IT z&q#}(t&o2h^6ff@H=3_sgZBV`1bjI7qu@2*kAcqze;oWSOSP>%m_K zUkUyO_y+Jb;5)$I1kd|+c%%0J9=rtn-@(hl{{ws`_*(G0!QTRZ5&RF}AA-LPo;WhR zQ9IXx7l6M5-Vb~|cqRBB!RLT)0AC9JE_eg@pTHZzH-aa+gg0ux{&Xr1?+YT_t<(M! DuMANa diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/build.make b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/build.make deleted file mode 100644 index 55f2ff4765..0000000000 --- a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/build.make +++ /dev/null @@ -1,106 +0,0 @@ -# CMAKE generated file: DO NOT EDIT! -# Generated by "Unix Makefiles" Generator, CMake Version 2.8 - -#============================================================================= -# Special targets provided by cmake. - -# Disable implicit rules so canonical targets will work. -.SUFFIXES: - -# Remove some rules from gmake that .SUFFIXES does not remove. -SUFFIXES = - -.SUFFIXES: .hpux_make_needs_suffix_list - -# Suppress display of executed commands. -$(VERBOSE).SILENT: - -# A target that is always out of date. -cmake_force: -.PHONY : cmake_force - -#============================================================================= -# Set environment variables for the build. - -# The shell in which to execute make rules. -SHELL = /bin/sh - -# The CMake executable. -CMAKE_COMMAND = /usr/bin/cmake - -# The command to remove a file. -RM = /usr/bin/cmake -E remove -f - -# Escaping for special characters. -EQUALS = = - -# The program to use to edit the cache. -CMAKE_EDIT_COMMAND = /usr/bin/ccmake - -# The top-level source directory on which CMake was run. -CMAKE_SOURCE_DIR = /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C - -# The top-level build directory on which CMake was run. -CMAKE_BINARY_DIR = /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build - -# Include any dependencies generated for this target. -include CMakeFiles/Si5351C.dir/depend.make - -# Include the progress variables for this target. -include CMakeFiles/Si5351C.dir/progress.make - -# Include the compile flags for this target's objects. -include CMakeFiles/Si5351C.dir/flags.make - -CMakeFiles/Si5351C.dir/Si5351C.o: CMakeFiles/Si5351C.dir/flags.make -CMakeFiles/Si5351C.dir/Si5351C.o: ../Si5351C.cpp - $(CMAKE_COMMAND) -E cmake_progress_report /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles $(CMAKE_PROGRESS_1) - @$(CMAKE_COMMAND) -E cmake_echo_color --switch=$(COLOR) --green "Building CXX object CMakeFiles/Si5351C.dir/Si5351C.o" - /usr/bin/c++ $(CXX_DEFINES) $(CXX_FLAGS) -o CMakeFiles/Si5351C.dir/Si5351C.o -c /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/Si5351C.cpp - -CMakeFiles/Si5351C.dir/Si5351C.i: cmake_force - @$(CMAKE_COMMAND) -E cmake_echo_color --switch=$(COLOR) --green "Preprocessing CXX source to CMakeFiles/Si5351C.dir/Si5351C.i" - /usr/bin/c++ $(CXX_DEFINES) $(CXX_FLAGS) -E /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/Si5351C.cpp > CMakeFiles/Si5351C.dir/Si5351C.i - -CMakeFiles/Si5351C.dir/Si5351C.s: cmake_force - @$(CMAKE_COMMAND) -E cmake_echo_color --switch=$(COLOR) --green "Compiling CXX source to assembly CMakeFiles/Si5351C.dir/Si5351C.s" - /usr/bin/c++ $(CXX_DEFINES) $(CXX_FLAGS) -S /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/Si5351C.cpp -o CMakeFiles/Si5351C.dir/Si5351C.s - -CMakeFiles/Si5351C.dir/Si5351C.o.requires: -.PHONY : CMakeFiles/Si5351C.dir/Si5351C.o.requires - -CMakeFiles/Si5351C.dir/Si5351C.o.provides: CMakeFiles/Si5351C.dir/Si5351C.o.requires - $(MAKE) -f CMakeFiles/Si5351C.dir/build.make CMakeFiles/Si5351C.dir/Si5351C.o.provides.build -.PHONY : CMakeFiles/Si5351C.dir/Si5351C.o.provides - -CMakeFiles/Si5351C.dir/Si5351C.o.provides.build: CMakeFiles/Si5351C.dir/Si5351C.o - -# Object files for target Si5351C -Si5351C_OBJECTS = \ -"CMakeFiles/Si5351C.dir/Si5351C.o" - -# External object files for target Si5351C -Si5351C_EXTERNAL_OBJECTS = - -libSi5351C.a: CMakeFiles/Si5351C.dir/Si5351C.o -libSi5351C.a: CMakeFiles/Si5351C.dir/build.make -libSi5351C.a: CMakeFiles/Si5351C.dir/link.txt - @$(CMAKE_COMMAND) -E cmake_echo_color --switch=$(COLOR) --red --bold "Linking CXX static library libSi5351C.a" - $(CMAKE_COMMAND) -P CMakeFiles/Si5351C.dir/cmake_clean_target.cmake - $(CMAKE_COMMAND) -E cmake_link_script CMakeFiles/Si5351C.dir/link.txt --verbose=$(VERBOSE) - -# Rule to build all files generated by this target. -CMakeFiles/Si5351C.dir/build: libSi5351C.a -.PHONY : CMakeFiles/Si5351C.dir/build - -CMakeFiles/Si5351C.dir/requires: CMakeFiles/Si5351C.dir/Si5351C.o.requires -.PHONY : CMakeFiles/Si5351C.dir/requires - -CMakeFiles/Si5351C.dir/clean: - $(CMAKE_COMMAND) -P CMakeFiles/Si5351C.dir/cmake_clean.cmake -.PHONY : CMakeFiles/Si5351C.dir/clean - -CMakeFiles/Si5351C.dir/depend: - cd /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build && $(CMAKE_COMMAND) -E cmake_depends "Unix Makefiles" /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/DependInfo.cmake --color=$(COLOR) -.PHONY : CMakeFiles/Si5351C.dir/depend - diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/cmake_clean.cmake b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/cmake_clean.cmake deleted file mode 100644 index e300fd2668..0000000000 --- a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/cmake_clean.cmake +++ /dev/null @@ -1,10 +0,0 @@ -FILE(REMOVE_RECURSE - "CMakeFiles/Si5351C.dir/Si5351C.o" - "libSi5351C.pdb" - "libSi5351C.a" -) - -# Per-language clean rules from dependency scanning. -FOREACH(lang CXX) - INCLUDE(CMakeFiles/Si5351C.dir/cmake_clean_${lang}.cmake OPTIONAL) -ENDFOREACH(lang) diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/cmake_clean_target.cmake b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/cmake_clean_target.cmake deleted file mode 100644 index bb2fb4b00e..0000000000 --- a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/cmake_clean_target.cmake +++ /dev/null @@ -1,3 +0,0 @@ -FILE(REMOVE_RECURSE - "libSi5351C.a" -) diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/depend.internal b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/depend.internal deleted file mode 100644 index 2b377e7bc4..0000000000 --- a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/depend.internal +++ /dev/null @@ -1,6 +0,0 @@ -# CMAKE generated file: DO NOT EDIT! -# Generated by "Unix Makefiles" Generator, CMake Version 2.8 - -CMakeFiles/Si5351C.dir/Si5351C.o - /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/Si5351C.cpp - /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/Si5351C.h diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/depend.make b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/depend.make deleted file mode 100644 index f55fdb2688..0000000000 --- a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/depend.make +++ /dev/null @@ -1,6 +0,0 @@ -# CMAKE generated file: DO NOT EDIT! -# Generated by "Unix Makefiles" Generator, CMake Version 2.8 - -CMakeFiles/Si5351C.dir/Si5351C.o: ../Si5351C.cpp -CMakeFiles/Si5351C.dir/Si5351C.o: ../Si5351C.h - diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/flags.make b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/flags.make deleted file mode 100644 index 3515e5e131..0000000000 --- a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/flags.make +++ /dev/null @@ -1,8 +0,0 @@ -# CMAKE generated file: DO NOT EDIT! -# Generated by "Unix Makefiles" Generator, CMake Version 2.8 - -# compile CXX with /usr/bin/c++ -CXX_FLAGS = -std=c++11 -I/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/../lms7002m -I/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C - -CXX_DEFINES = - diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/link.txt b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/link.txt deleted file mode 100644 index 000b6e0ee0..0000000000 --- a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/link.txt +++ /dev/null @@ -1,2 +0,0 @@ -/usr/bin/ar cr libSi5351C.a CMakeFiles/Si5351C.dir/Si5351C.o -/usr/bin/ranlib libSi5351C.a diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/progress.make b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/progress.make deleted file mode 100644 index 781c7de277..0000000000 --- a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir/progress.make +++ /dev/null @@ -1,2 +0,0 @@ -CMAKE_PROGRESS_1 = 1 - diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/TargetDirectories.txt b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/TargetDirectories.txt deleted file mode 100644 index 8bed4f4e60..0000000000 --- a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/TargetDirectories.txt +++ /dev/null @@ -1 +0,0 @@ -/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/Si5351C.dir diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/cmake.check_cache b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/cmake.check_cache deleted file mode 100644 index 3dccd73172..0000000000 --- a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/cmake.check_cache +++ /dev/null @@ -1 +0,0 @@ -# This file is generated by cmake for dependency checking of the CMakeCache.txt file diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/progress.marks b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/progress.marks deleted file mode 100644 index d00491fd7e..0000000000 --- a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/progress.marks +++ /dev/null @@ -1 +0,0 @@ -1 diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/Makefile b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/Makefile deleted file mode 100644 index 45a34a03b1..0000000000 --- a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/Makefile +++ /dev/null @@ -1,157 +0,0 @@ -# CMAKE generated file: DO NOT EDIT! -# Generated by "Unix Makefiles" Generator, CMake Version 2.8 - -# Default target executed when no arguments are given to make. -default_target: all -.PHONY : default_target - -#============================================================================= -# Special targets provided by cmake. - -# Disable implicit rules so canonical targets will work. -.SUFFIXES: - -# Remove some rules from gmake that .SUFFIXES does not remove. -SUFFIXES = - -.SUFFIXES: .hpux_make_needs_suffix_list - -# Suppress display of executed commands. -$(VERBOSE).SILENT: - -# A target that is always out of date. -cmake_force: -.PHONY : cmake_force - -#============================================================================= -# Set environment variables for the build. - -# The shell in which to execute make rules. -SHELL = /bin/sh - -# The CMake executable. -CMAKE_COMMAND = /usr/bin/cmake - -# The command to remove a file. -RM = /usr/bin/cmake -E remove -f - -# Escaping for special characters. -EQUALS = = - -# The program to use to edit the cache. -CMAKE_EDIT_COMMAND = /usr/bin/ccmake - -# The top-level source directory on which CMake was run. -CMAKE_SOURCE_DIR = /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C - -# The top-level build directory on which CMake was run. -CMAKE_BINARY_DIR = /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build - -#============================================================================= -# Targets provided globally by CMake. - -# Special rule for the target edit_cache -edit_cache: - @$(CMAKE_COMMAND) -E cmake_echo_color --switch=$(COLOR) --cyan "Running CMake cache editor..." - /usr/bin/ccmake -H$(CMAKE_SOURCE_DIR) -B$(CMAKE_BINARY_DIR) -.PHONY : edit_cache - -# Special rule for the target edit_cache -edit_cache/fast: edit_cache -.PHONY : edit_cache/fast - -# Special rule for the target rebuild_cache -rebuild_cache: - @$(CMAKE_COMMAND) -E cmake_echo_color --switch=$(COLOR) --cyan "Running CMake to regenerate build system..." - /usr/bin/cmake -H$(CMAKE_SOURCE_DIR) -B$(CMAKE_BINARY_DIR) -.PHONY : rebuild_cache - -# Special rule for the target rebuild_cache -rebuild_cache/fast: rebuild_cache -.PHONY : rebuild_cache/fast - -# The main all target -all: cmake_check_build_system - $(CMAKE_COMMAND) -E cmake_progress_start /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles/progress.marks - $(MAKE) -f CMakeFiles/Makefile2 all - $(CMAKE_COMMAND) -E cmake_progress_start /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/CMakeFiles 0 -.PHONY : all - -# The main clean target -clean: - $(MAKE) -f CMakeFiles/Makefile2 clean -.PHONY : clean - -# The main clean target -clean/fast: clean -.PHONY : clean/fast - -# Prepare targets for installation. -preinstall: all - $(MAKE) -f CMakeFiles/Makefile2 preinstall -.PHONY : preinstall - -# Prepare targets for installation. -preinstall/fast: - $(MAKE) -f CMakeFiles/Makefile2 preinstall -.PHONY : preinstall/fast - -# clear depends -depend: - $(CMAKE_COMMAND) -H$(CMAKE_SOURCE_DIR) -B$(CMAKE_BINARY_DIR) --check-build-system CMakeFiles/Makefile.cmake 1 -.PHONY : depend - -#============================================================================= -# Target rules for targets named Si5351C - -# Build rule for target. -Si5351C: cmake_check_build_system - $(MAKE) -f CMakeFiles/Makefile2 Si5351C -.PHONY : Si5351C - -# fast build rule for target. -Si5351C/fast: - $(MAKE) -f CMakeFiles/Si5351C.dir/build.make CMakeFiles/Si5351C.dir/build -.PHONY : Si5351C/fast - -# target to build an object file -Si5351C.o: - $(MAKE) -f CMakeFiles/Si5351C.dir/build.make CMakeFiles/Si5351C.dir/Si5351C.o -.PHONY : Si5351C.o - -# target to preprocess a source file -Si5351C.i: - $(MAKE) -f CMakeFiles/Si5351C.dir/build.make CMakeFiles/Si5351C.dir/Si5351C.i -.PHONY : Si5351C.i - -# target to generate assembly for a file -Si5351C.s: - $(MAKE) -f CMakeFiles/Si5351C.dir/build.make CMakeFiles/Si5351C.dir/Si5351C.s -.PHONY : Si5351C.s - -# Help Target -help: - @echo "The following are some of the valid targets for this Makefile:" - @echo "... all (the default if no target is provided)" - @echo "... clean" - @echo "... depend" - @echo "... Si5351C" - @echo "... edit_cache" - @echo "... rebuild_cache" - @echo "... Si5351C.o" - @echo "... Si5351C.i" - @echo "... Si5351C.s" -.PHONY : help - - - -#============================================================================= -# Special targets to cleanup operation of make. - -# Special rule to run CMake to check the build system integrity. -# No rule that depends on this can have commands that come from listfiles -# because they might be regenerated. -cmake_check_build_system: - $(CMAKE_COMMAND) -H$(CMAKE_SOURCE_DIR) -B$(CMAKE_BINARY_DIR) --check-build-system CMakeFiles/Makefile.cmake 0 -.PHONY : cmake_check_build_system - diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/cmake_install.cmake b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/cmake_install.cmake deleted file mode 100644 index d7797d84e9..0000000000 --- a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/cmake_install.cmake +++ /dev/null @@ -1,44 +0,0 @@ -# Install script for directory: /home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C - -# Set the install prefix -IF(NOT DEFINED CMAKE_INSTALL_PREFIX) - SET(CMAKE_INSTALL_PREFIX "/usr/local") -ENDIF(NOT DEFINED CMAKE_INSTALL_PREFIX) -STRING(REGEX REPLACE "/$" "" CMAKE_INSTALL_PREFIX "${CMAKE_INSTALL_PREFIX}") - -# Set the install configuration name. -IF(NOT DEFINED CMAKE_INSTALL_CONFIG_NAME) - IF(BUILD_TYPE) - STRING(REGEX REPLACE "^[^A-Za-z0-9_]+" "" - CMAKE_INSTALL_CONFIG_NAME "${BUILD_TYPE}") - ELSE(BUILD_TYPE) - SET(CMAKE_INSTALL_CONFIG_NAME "") - ENDIF(BUILD_TYPE) - MESSAGE(STATUS "Install configuration: \"${CMAKE_INSTALL_CONFIG_NAME}\"") -ENDIF(NOT DEFINED CMAKE_INSTALL_CONFIG_NAME) - -# Set the component getting installed. -IF(NOT CMAKE_INSTALL_COMPONENT) - IF(COMPONENT) - MESSAGE(STATUS "Install component: \"${COMPONENT}\"") - SET(CMAKE_INSTALL_COMPONENT "${COMPONENT}") - ELSE(COMPONENT) - SET(CMAKE_INSTALL_COMPONENT) - ENDIF(COMPONENT) -ENDIF(NOT CMAKE_INSTALL_COMPONENT) - -# Install shared libraries without execute permission? -IF(NOT DEFINED CMAKE_INSTALL_SO_NO_EXE) - SET(CMAKE_INSTALL_SO_NO_EXE "1") -ENDIF(NOT DEFINED CMAKE_INSTALL_SO_NO_EXE) - -IF(CMAKE_INSTALL_COMPONENT) - SET(CMAKE_INSTALL_MANIFEST "install_manifest_${CMAKE_INSTALL_COMPONENT}.txt") -ELSE(CMAKE_INSTALL_COMPONENT) - SET(CMAKE_INSTALL_MANIFEST "install_manifest.txt") -ENDIF(CMAKE_INSTALL_COMPONENT) - -FILE(WRITE "/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/${CMAKE_INSTALL_MANIFEST}" "") -FOREACH(file ${CMAKE_INSTALL_MANIFEST_FILES}) - FILE(APPEND "/home/papillon/openairinterface5g/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/${CMAKE_INSTALL_MANIFEST}" "${file}\n") -ENDFOREACH(file) diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/libSi5351C.a b/targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build/libSi5351C.a deleted file mode 100644 index bc5d760e0aedfec3c12ab319e446c9ce801c5bcc..0000000000000000000000000000000000000000 GIT binary patch literal 0 HcmV?d00001 literal 162342 zcmeFa3w%|@wLd<|;iaO9ii(!nNYUa869^C#H9QWU$SWqGR?$O94kRV7CMO71EjGlG zMl4ln?X9)eYU{1m%k`qAiZv(&^!mWodTHymXsrdIEmf{&nfaBC8c9a%f^o>oiMhjs90v%e~XGr z%8JJ*Wd7koV`g=2OH)&O z$(V~W&6&1_+RB>R#hI+8tnoWsx3#gQrp_;+?BS5YCbV|6 z*QXbNx|6f(u@SjSR85yf44>kP=7wxTO=H8gnPjDr&Q`_fk{KXKRc6tpHH{sa_GxV` zP1710Gs)_9#cNDcO>0F{Lv^;aG1J~&(UgS#g^SjjhPI07O%2IpQa8RjTb8a`kj}Pc zG8IjB5$MO_bakc?45XwzTTwkao%B}+KvJuyI@<@1)E!W^J(HEpJmH!ci9n595c zbG9M74BKJ12#KO9Rr%G~@e5npuBmCOt7u5ho|CSE{wNvOmT78Pl1aB^7G~Nq&9#|| z>f&^=G`p-dBkfLW1N1eeq@rO-GFdgf35Y?(R((ye>%$I!3Y)OT+12TaIq5mT*I#Q@ z&T30|F{@OybJDY+Qrl$4PittdyL8IzWM$AzRf1npehd6iQ&V3p$a5C%{*1~W*U;Ra zY0IKgk>zyGF2*j%ENW<09uo?U9;59wUE9*!o=rDoGvF-1i8UqbGOAeaQmw6~GPmSo zGR<|SNG^WO8IT@~rmrfaCgWg&?oUGh;~ALZc+)1+n(ESYask?wR!-!QE^SALLH;Ou zJO=dYl)-ixtyx`nbWzf9U)+LE*^xCXjgRqJcF9=nkuy^oTWS}#D>=10EvtqZ5AkGu z(}D%4O`S6ia=_#PZ?NI9RT*$l{z`BL&3d!1)Rs5YL0V2}>rVXQmfrvgtXk>6%7R01gr<1p54`nf7d3 z%d(2f`ugOOIqB+>bQR1IhF?SeS)uk6kj(G!^Ew8VHmsRA@6nI*YcB+H6IA1=b03 z$DGGBzN|C6j81&?h7s3qfNmu5IWrv8-V6=1hHc*muLm5RWh33B41}nnLCbJ zkeo8QqKcESY5|6~UL2acF0eX?q?pDk8&|8B+|__cC2>Tu#(7k~m5hU-s6y6sM{~pH zJ7D^o4jrLa37qhD3>Sl4AUcadX#y&%@3oM)^vhv6fyvZjsw=>?3$!$PW#~{B%$^wa zg392;tu9<;G75_=fiE0Bn5NiWad6(;>Y9?0bh@Ult__ywEeri~C4?AN)hfgVEji;b z55;NF_%PhWF&BL!H9pg;(vCho6d8GQgNNItqw>LX&xCy*3ejLrtEbhbyEa= zR>3D&_MJ0C3@qyV79t*OfT;T~81=dXL|^a=;bD-ZMUet=z(OdTs=w z_R=)^ezQAQmzEny4GYuFEt#dYnbvH&23Azy-_)W56bDPIF==pXRdY(Blr+AM)@0DV zOK7d3#1A&pX+)$~dzEo8Ue6gk#&*J?SdCT=+EYwOrx!JMq-&QhEg93CxkmQ}?B;;$ z^Hv?X78HG0dl)BoFbXMyq14u}s6H!0aZ?j?eI2f0+cT=KOvV9hr;Y~}jhTi2gB(i6 zN)Ig8{!;SX>k6weQSp(}UZRMsE>`O~S~nbsdDzPdmrY>4%MhYujNk83HOB7ds0#bk ztD&_8M6Z2}1+AIZ9k=CPkl10RRaMUQNMO>|!M}SoBv&FZg@u+Jkz^$mVKSHleD@q` z8}%NwFZzq>l+mRy)NudJw`fSWwzMBmbr5r#^@m=0xV3>h1!mxS?x}hT+!N4qkaJN9 zqt3C*AngVshFlxrF!-aEZ#l_?pVC;&M{8hY0}9;!3V=^iDf2qx5vf2PoE3ORl?UZplSZ zQp_xVXg6N&7R#Mgs6|JEl^71nFp`?WZE=T!eOx9Sx=??t4E41I_AS&$2@YnPJ=Q8J zuq?{e5%zjS@6M~8eF)iOs+r>MIEucw&ugmidZetWW@*~o>63R7mcp&is_9@Nu-a31 zTXMC%%q+iQeS~)lp^nk%bW_dZOn5nCZb!nZ2K=*H?&uq?Ft(FPxyF&TjD}kLtE1YM z)@86F3R8kjgR7}m#MPy^Mv}LmU>7n<``|jw&;avtt9_gqKHfr>S;6W%IcCN@fVkb7 zxKtRcS2>TzD30Zf_BXx|!*+2{fp69T*9O_%6BOv{k`@o2Ab?}=V4fX+G%mj}K$?XsD0AOV-6uV8;mk4`ZqkA0gkh~r>YzFpMQ!cK9@-^SsJHa$ zCzshksO_|ssBn~HcF?AApzEqb*8L!W*XKA2oP8dtpQtVlMx#~ESUJ~{3ZCe&?^UY+ zl#71A72@p`CllCq3*KCbt_*IB^reSDIfDyUd4Q|kB z&`PYF>rJ3Ubp~eSzKn2tmdm-?9DisAyIxFIPdH>lK1Y?NlMf&W;s=whGthc;7&8uH zJZ^MhoP#~g3J{5vu~}23rd{cu|3A)^>slk7l`f!gZtiB?sb~IAkL)~ zy8-$pjjsu4%4R3RzMslJ!iP?gYqqySG}FTLT=IG4>DkfXIuBNB(3xt60lsD7MIO7v zvsZXHYIDh9f;i}89m4VDL6Cs^_8GAkB)jef1d2vlVH7j}#ttkz^l9926UQOcSS_eDsF%s@g3_`47 z3SlKhCI_&2HCjI-IzGJcjBG?OKmvb(vN`;5lkL-u0uNx`4)jHEP+8NhZ{qgvT4MyN zAM`zh!kDUZ7=}HTp=W(Ug7A|OR>2HjHVQxY68QNk2oF3uIE^7I1|E#W3%mB zBSV(d_ZWfqTXG_Z*gUGYM^e4ol=V$_AU`*C!4nzPuoI~^I4f{blVgVu%Hck!V~4NF zJfmW^s{>n?IHirIDGglL=wjE_Wrf^|hiQhkHR17?)@9682g_cX>mYbldy2do!w$&q z-vjpa2RK25HiX&WA}lvLr@(y&&v`;U!N-io#DB~P{3$Gc@S*!jIk)EB!uh>AxzmI9 z>IdGp2cvDjm4p=Ub3hK|kBhH-@JZE^rShl5RDM8KyB|u^7au}L35;@#OV~zJPhrWM z407QZr|-bN1L1K@YP;R=u9uq5`?i8{8+3TIkx@H3oE>fa!X`M{a;zM}^7;GxAQb1X z$kyRlm}J%4bKrRnRFD4Z9plKdPlsCBam1@NFpfZVc*_m%uBn&3P?!FjYk1oic;hpQ zUNLyBs$`75C#N0?s4m5U2?gQVM0vkWR#P)tPG0g^#3Vd=2x9=$2BQu~05bF6i)zB> z=5@$R?_lLvtGOz$XMJErMj7g%0ApWIpbTD=Vzw;ej5uF?K9RAeiQXDjPxEGUM%MW!3g77{#-Z+b%Z z1NJw>h2z?4n(JDc(lxcU@T9(Z*EpT6S(KD}MsS0>3Ey3W2p87I@Tf0@e=s8Hiw&b% z=#w@2OEqIl;Hxyn#qd!Y^LO01Qn)HDEh&SvsA&G-Urf%JmYU{{4=CM7>E9^*kkWrp`Z1-bO4J1^ z2Gf3&_NR0JrGqFvoYKLR9z|&ZrAJeGETuyzJ)Y8`l%7QCCn)_Sr6*HbMCou!M^Jhi zr6ValgVHl8J)6>VC@rCMG^JxGEv0lUrQ<1`Kh|p zP&%E`nUv0^^b$&|DV48 z($$oHjndmFT|?3&K-qV!`*MZOSoQ{BJszJ7mCa(`Fv4I?1w+;`L$he4XE-InU! zmfE-@Kb40`zf^y4iDGyE^_X1sw1aR^9Kz1)_lu<`z~6yiJQ~^E0X+Jw7zV5l8!hMhhQUcz2{XWt0rYaBF?{zK_om&2GrIqPGoh&H+%z=RxjQe_`QgVMZ&SIl#|Jvf6$Q%mFN4}1 z!+GwfSW~Kdi>z@=at~ha9@UfFQ}F0=JTG{3FI;r?=5_ZLJh~E*RL|V)soKpeZ_dX` zI+J_yp+M^VpTkAl7AXa42g-GBD!OvgysMsGjiv!j*{9luEn5ngD^shIYdy|ukCk;N zSEhPIs;jr-aM|EpgTN*?C%=<`!rw`)n!7gD`P86P_vTdhe@TfU>tiNsOY&~0QS833 zCwX^gZ{bR$=jvF&WOXL*&g;DX?twQvz9o5Y0oFFXCwVVl6=Z_pu3B9T$^ccY#G$gP zauC!Gg7<>pujmGMChvus@11wUzimn0zlLhQKUdB7_qpc#^KQKU{vSe}H#`XX`FEym zko6#+#VK62YSrrVuz}%L$z13^*;Zv!oqO|E^kxUj-rRk@E&yfl-(2YJV^XVTf*rg7 zUHb91?&O1=*FPva2K6M@b?(d4bp0QP)+mN#s@>anpOor;TFO9Bsv8EoVhXmm^h#}c zoqGz=`oJ0NO?6(sS9F~C6RhpAtDz0j{GY^2X-**CK9Fi}s=M$RWw+I-8~3CJ0PpT6 z*8lC}k5k=`tc9d5)zk0PkwBH|PVOw}O|9zMCNqh9PZt(4!gOz>0*?)nB+yhEZ(Ywp zInhsuU0=bRRjYP<2z08p#}Jo#QH2X0?ZVuNpYF)torW@a;Tyd$X!3Vwppvb~eASvw zGVzs@zFM}lrwg-t)?nH0mr^}zWb5vrQLP))e-QRFNh^D@pzG3)jfgsjddH^(=!~AL zcGjiF43mn=j@bQ4*DmB)QN3Hb?tn8m5xW=m$a9)Xy20mm$qMqeZ7CmuCD{DUs6t)pDMc;JTYNlm5NHpy1K+VW75^U0(;8OwJBF=Npi-x$8ERd2`q8n1J#H>R8+I zs;*-Dk{V&^U(wrfVyNmBy#*_lf}Bv-e4BVxaADj*gXTeEDXZ%16?Xt) z>h6^n<>1A-_Co313j#TngL-5&se*rdipoFbl)guh7@e8YmssSD7g_scOp4KWhF*i)CgZKgQ1q?Pe`p4tUw1~dZ!mI zXpkCghli;F1FiH-7%Wce>#8l16O=_w`}Bl15bVyobh-&B=F@tsZIY#QK z1zNaSj;OrNU1+3vyKwd5A7w9~tlDCG;euLj2+=!Wm->eC|E2Z@nMO9b5tmt)8T}hU+a|cS8Zd#jbg9*&{C<(^skoys+}AONQqxwW|jz%TXdVC`abygTN|V zL88Y{q|^uRLg1aF_|ib}4{*KM)myLzRt~+XyuC0lY=n4e_3i~*q*2LASFMpoy=vxa zrCDo4&g})04-Cf~>>x*_r4D-vp{L$0xV#t2VdMwPdoX{C=AAGNLQlcEUDK#V<I4HdU8 zVHN5&Luw3qCZ>dKs9(rc6%;%f{6zmZZgL2SZCA;4l@|&V?dIjUu@39N!Fq&lJxuNm zAUn7tgSkMhc=oKqQmNW!Qk@&~uQS zR|J+7vL$zHULkMiz#NX1u4;vN5l`$Q1&^vSrmma<^lscS5cqD?9LyafE&UoL{m~6EeCNHV9W%_|~ zWZcF)lxaZq<@O?un;5-&wpYVF+oQYoD!~`g`F)u=Y#0{` zu&E&x^GKykRw+Ha2s@%64cupzsdNQB-^P+td+x)MQ+s|SOB#jx#hu#yC#_7MFjKqV za^l^uX*j32gJE$oP~O4WO}E+D9w?sLGap(feOE}EoERxj4xiXiPq|djnpRA_ZqOOs zo1a8)DfQ%})Rq;L*K;VK>(n6lBk$N0jM{h&-hn`er@B4`;i|82`JjSPvh0%6Bu7R7 zc{6iY7yL9_=M(6~`WJk4K*IQGuWrBTp1=I1y@LwA+#>@e>}c?i?-ZP|1I+Y3G>o1u zGy;4qp{EP20?xL+3wsjb2NR@9V9P?8@Xgv2em;M}Pg^zZ3H_@LNyA$4I^6( zo&g;*dgM%D;)<24Z-sgk2wQ-#g}efz{^$|;F5JNk)rC*JS#@RGqU(78Z}xN zi)cEZkX;v;w~dJYxPhC1BO;vKecw|)1i~EE)b{WLta2;sm;$pdM+yUvp5YVLqJ4%z3JJ7B8B5*zoq z<_n=`C2zq^rmeeA4ZHsz>T)lVrf}08;*R_+f9Ew}3hn_B^H#ckgx=>63QNg3%MoGZeW1XQD4zrL!KZ?{^gF!bW zwYEy#zP04kQ$&tcj;(LFKdz+eR&Ht6eK2tsJi0~-+#?@?^DSqdg2xT84_8he5>X1f zVC7`kW(d|r5zng1atKDGQoHkak5=Yki>A#(DviXm%wsj!2O0xC)rZewcJGD9vUhgR z+`BUQ-tz0;%e!WJ!K3&X^~`;aFhf2;+mqax>dwzys<0=yw|nwn@43$+;I%V_r0fIF z`!W8(2cGxa4?OP=Jn+2Ji<)Oy6rVkSRPTEDo^i&f z4mT$sfM_E5K+5$r^8@%8j4KN&g^D2^pwOY8GPab3EcW$cJyT|ynyRr-fx#*YCr1L&wS9_K3VI6IfWOq485Jif`tK zoonG?ldGPFGwzt%ytujLn&zT*`MZ~*s6$f)fgciW9|2;uFhZ8MYs5h=n*%IRpJ)$Rk2!pP24JO6Ss>s;_KoY z;tugm@h{?A;!g2xahLdxxLbTz+#|jx?iKfm?~5OZ`^CSCABqRWgW^ZxA@Ofwt@wBG zu=o$LPCQclsQB^E*U$gS{Kv%Oy&J?6u=svb^oot*De<(}Bz`6~!<(X8#WUhr@t@*3 z@w|8e-U{6&UJ^eSzYs5rUy4`6e~InlSK`;=H{wYnN&3; zbq@SEdG*w)bLLjV?`l>~nvy(cM#bcF=)GB;j;d{K6-~{HicUGdsJWxDu{GN!KAoI3 zHCgwje}=XQeu-56!g&L<3x1WlsHvqbQJ(s=vx00Eq;Sv^&2`nh=)VR+*#9S&Ax0_2tQCD zdFkYF2TJRro7%9b;Uf4w_hwh-0bp2PRi^F$DBUE`-tq3714FNVw151Q){v{)vYyci`f$K zGODJXeJHCFF!78lE*^dM-0I0i)!ByHgOwBHOCCxAt6QdKst#d)1hsvr{ny-C)pIK= zXIIThP7Sg;pzB$)=M+u4bW+8PNt0oQKlo$jvbKhrx{`yhh-y&v9lG&+sK;NbawdLU zd}E7b;+R zg_p4dG0j>mUoi^KYtTUu+vVj#v;wwn^3Wp-X5D++rL*+=_ zFt7f>s{TSP13dYSr-54Njd`eVOL;$4AD#~KP6vCZ_#BxO$GjkiWrup`Fgzs=xc@NJ zY=c?vWrJKhVTTj8$Y`euu8kNwNsQem<8GfS3GaPUN#A?cLt&Euwxb6R?GGOo>OWOn z1t}^>Z5Z^(?;squO}AISi;bG|GskPg;u);6Uq5QqfGD z{23vBJYY!oaPiv#{eNV~NjLaf z6Bg{jhmSFZ4Nvclw{R7GY(3TL-CPJN&)17ecfee}fdFZFVQRut*%H5G_z?uZX!6On zO6d?&&_TP81wV(q0KIBn>3W8|qwc40lVas)eR&KNKjnxbZSc_ZG96;i0Xb}3+ft~9 zpdH4h3LcdsVWlzp&OOC2TDHSz*#_mdgPylpI)?WfcgR7s3R3xXk(rRpv zgV2y3tp2Hw909?-p(gpw1XD(@Wrhp&4aQ1k zVA5M*;Ppb0t?I6Z4Bd>pFy{AZLs6+tN#eCqgCs3@NswQl_yVLPwiE;>f2`Ym1P z8jK=$5BHVn1`ab(qaZ_2ERbQQ4J+QAo64-aR>nV((u{$4o-3GxrUTV>?ATo)8%p`g zP$9#J>d(c=985w=Y8L@B18sF)ze9Aa4f?}!`r22HD9ZLH{~ILDHUIhZ)aT2f`4Fjf zQ^cor2{V%nee#vQltDOV!Aj_h^-#lF(Cu0^#d*5zM(cxI3js|lRy*PGkL--i$ro{S ztTk4M0}4gyz>We^vc&G>Hn!6NC>Occ@1cJicgK?ElPu{TW z!E7w%z0=jXX=E_c;YPK;H8S?4?tpV^n^F57*-C3m5%40*KaDi!B(3&UFw2lvrC0#` z?9dS6&3u+G!gyTE1b)fxP~J@``u|tj6C-{qlszQFa?3^tHQNZLLf!wt@eF#_I``G6 zV-&1O(^h)1m@jnN4x+3#^}wLSsB8BnfP%GxL0cnCjfM3ve%4w;XJzum<=4L`vi`w{ zZU8FKUIWhY8eUcWz9R~g^mCwuEy!N*4)EU>u7Q6!1z>O-u&Q7}y=xVXRt(Z>DR4ao z;zKOzO{{&X@-wi!Q_GW8FfsFCrq(ug9L0-j^r-IvmqQn9g^XVC7|_z0Yt_@=o!9q@ zjw%oh@<`J2lIyeOwm#s)!Sba=Dg3G=co8qeRLjg6-Ea6?<@-X}%H(fX{AM-O2u;`8 z!1xDlv}Uaw2}M930SBJkvHJ*Qrs+C2 zmCNr4D@*irvk$2E%0QaWi5(C7#(|dLpX0%F22RylEz)rQIUfGEjt7440LBo_%HdES zMwDuh70ZAxV#|B;Pq%w%pku<3zIey-?gfty1y2H@&t~-GTv?Uex@G+fsfoDIR}8uz(Z1*83y*S797nROIW!y-%i zFVLCi1?7re`W>ZQ$b|idZYbCduQ$m32iUKdRhlg=Q>$uW>^RQqs~i!X{9Fkt54IUl ziQYBr%6mQ(vaFcR?t4o*AjdFR?TvEnuzKo$nS|Po;7*~>vY|&|64Q177QHG7@Aa6@ zwOWCFgq?~VDQyi-<^7Rcz563%BRDPQ+}ZKXX*dIs-NHA0jdV))s8L{}1;mXs-@O)l zk4P6{TA|k<+vPgV8jrMi+Ge-}7G84O)wg*KI@>)a*Y>ZpdW`3cCiQNuS;HKf9+CR_ z|E~s>wdkG&LzbRrJ6IIxUOBgDZ%e+*GdQBOqf@_+*wPDccHpZWCft%93~iMnG^anz z=?iI0c%I0N1RPah_SX0_0&4zo%7Sv_vnU>?0AkIf;TuB6a|fmJc@fu^nU*!cO}7o4 z!2c%_S*_J3<7*>$J(|wA?mK|_6|KbjZ5jBmmoEkhM=5>NZkP`2hMVJ+4Ep;9{d7TJ z<88C+lL&e!?vPFvH+p;lG;W4L7K!BC;PJ-P`i1HkpzK0d?HuLmu`Q^2^OLw+qr5G| zR7Ws7NN9EI=c=QBy!!EZ(a8FhRl&4|cQ@?5^?vEb*$!B@`cyXC6K=rtIhVQ*tKJ;Lu|=qgYj)P?ctPW?aux=Z*y zqpaEt?Z&7d!=UXJA0R;v+u>Uwpf__|G-b-UMI+}f=xEM%6qSxD8&!Jt=ni>Razjb! zsN&Mo6-os1H#*=v@7gMnx3neW+5e6EAkS5K-l zk!Z;?_25@g@i+%Y#czl`!Z z{+H*VM}5yH{#{@cAw4Y}A{pVVvXaV`9vvt*V^!kjex3ajpFUca#X8qf*MZd3 z5FVYC$0Gczb)UaL)`PkqB8dgOGi&EBGJJ*+{fR+7VD|~)gYrzJa+~1XCl8K~$7FTV zc2^KTmn{?l?afrrlwdtKcy(;0I=KGWN%=UFnl>-?=m){$x_EH(_*63<@_i(uGv!QB zXDP~ewE^?%bL1C6ek;jW2Iulr^Jw>Ed@x5H$m6*j`N-qtKJX}nPif)7>7h6xzmoDV z#!7S>@|7b(8Cxm8(w9G7HWKq!Q$DB1wGsK-D1W$J|5ct2_fkHNEhAs8mtQy#GlVz} z|7iIuz5HUz=k!xa`JA1#Qa;zd)e-q?Bl5RVKHGlEXWNgHI~=FrAKiX6CCjl|O!?SX zCjT-|Kb4fvwXZctei2l;l;oQZ=e}`}KTR@0zU!zCt`AZW@C0GdekzYv@Q(LZkT=D_Qy9!^(xM&xgx{5o3>3OrEG zS1F&1-}Xn;KTHM_{2V=z@;UzVD4*kh9p!WVcxOcZhKT%EDSxu9pX)t4*iZS-+W9J^ zlD0nV2+W{3SlfYR>k}#ebS$LvEjybRk$)ZKv+bvRPW}y)&&mHP<#YPqPx+ku!{iH5 z0>0qkZr?=8=j5M9`L0+I?ejXyXYHTzOKtuwUjJ>N{8R1x`Ck63l+TURH>v$m<8*}l z%~}E9DuF}yGmZBmfTmLZGj=}4I8S=A)aR%Jb+MB2U49#R+)w$lf;^^rJf5R6oIdtY zevMs6zPH{QEIX24L!3qVoITBm$Zw?la-07bJo#^?d``XxDPIm--4E6p=eY>}dm{1& z7ocE5l;a;=za`&UlrO8%`PQ0a2IXU%YUr&PwK0PJX39U$reEUe=RwMEf_cT%pQx7; z3fjvoR?mv_8%6Um(*JFAIJ&o8Bz#;;5ZTg=yuNWFIXL z=i0fB^0{_yAU#C2b3fI?wR0G(x$xlp(?rVW>~S9DyT-Kif0WPZ=}yXb`5mO+K>0pB zg5OyNT~!46o2Y%rzaRWJeQCwRYI8@hdn83t$wFLU(<1}8Mj6T}pYu8MDZj*~Z}jMw zN6_C*`CK3LQvM{neruh+gYr2Y3;aoJIJo>G%0B}O>9LUUcgcr7?S5+CEpYC$ah!iwcyjKfdN@4{k_$dw4N@w z`PWfC7aQD3`JAuWK>3`ndX@6$_~cieCEHK=-1>CbCy>y+7br%xFKf!yEPyoIrqX(S z)|P3k8I{c}&5BWV@VPB9YC(Iu7$woR7KLE$sPq-h*ECfwp)7)Cm6WQ_yQHVUR|lIj zjZ;P^Lq&?I2z)A0WozQ`^l6xq;%fPQ&&dthc1Hze`fD*IV=l@xXWANSE8$yynXD?h zsJ1qpSz4QE&8DGcjTsPhR&EMnU!84ftIn2;NmsPAr)R?_CYxI7GS%ro1G%cE%7zA+ z2Z*b)W14DOE1DXrv!#uh_V$XVWOYpiT(rXHEGworH6)WsRgvih6d%aiGuetJA61hs zYQ!H8pM1OqzARVKkeodyT?J$%XWnG`kteuoLxOSlK+I(j`sRA zewi{kyWXjh>A;BZ+tHd?R6{LBRnvh}(A*-e)Tybmbk%}1d_piIP1V>m*kN(HI@1VW z#Vl#hR)8LoK1)U*3FD54)A)VTit2Ic84F6ZjR)jA7)CM1S5zZmKu$xi9xoQEr2WHs1-Ql=~=Jrfm7X4PhqNj5nbnJr6qK4+s6vdVw zlWDHQ(xjE`c-(+Exrtg^V{oX;ScNSQt>+Y+QVz&rL{C(tZXD0x%#+Yv zc;+_2>e6&lno>X$sOU&vQ`+8et!!q%3q(^g-P;$Yj-GanEv;uccdPCm6YlOvO4aAS z_JL}m$+A}O!~7GNsv4FigChYd9i6^ZexDfTnf8pH`8*W8uhU0*MQlQ+k8~IHxh3t9?^^U>*i2hH)!DN2)C`2IEz2q@>+6$C=A^4j(p4~vbFoCu zd6SQc0vatDZGX_Y0%L~clBumSOtR&Zv4D{t=ENEZWh+#WF+qC5wvO6tMSTU#z8Le( zsci&pRHseW!q)V{*5Y(~Yi*-(#@Mult>APaGy|tnIVTOAtH*}TEhsc<)Rr4RL|s9w z8R-vZhIN?)M!D8>*bJd{U*g__5u*%S-3B(EtaR{(n8S19Xif(nx*#L>JmRZ2YF6*7 z+DzadFgU9TQLJ*RrioKbUurdaaKsYRbB6O)>>8$p4vZbx2rK>u+fD>O?`_l4kR-2 zhd?Geg2qmOpAmq)ymZ6Dip$&EW`U0_DNB3NQo26V*qUjBt)z;ntr#XHlVjl*K{{a7 zK$~4MV5%N3Bc`%o!~}yR*r?IaN452t+QsR{OmniSa(ZpJ1B_wV@i5rkOdYpoF#NVg zVt|QraKYN7G>z`wd>p$jEw}I*7N(n9Xk)Vmf?jX~DxQS)Li9T(4WqwmPD!wB;3>v2 zf#~=;ilCvdmQX|)YUROoC7I?=)0|9QGHfMi>B3}^SX>&DS174aE!(SqsGj_9DD-vk&)#ak<-AvnD2j0yl#C7& z!DdX(TL4(0u{v)AfY+5bRhoj#_hVPg#4D0rONrT7;k=u#yQPT!&*c z!c;UxbfE! zJq2!kz^tG}guZnyrC_u=JJzPmwbzOC(0t1oNRQojo3&%UoST;854rj3u)cbN&xivy zXW5G_E3`Q}pwDGM(l&MXpbCA}**6Dk;l7Ao22{hgYG72Gm8w9~h3 zdWNstesJl*jmBhO4A9mn-iLG8BJv0}5O3S{b)IoX>3sB2pDZa3hUvPOKnbJu2Bh3g zllQ8iE*(-;VoW8&vY^C#JQfOnF@`>L!S7fZ{Dy2KmjWDHl}psNBLtm+hJ}OZvZk7) zX}xz(nv+}aOW~GO)pXDfYIdd zEC@Q^-S^{+m3hk^X1x>M8;;(G^^YdsTxE~ZpqqlR3E9>|4FH61fYMD}m?UsgYsfah z&o-)iJKo4TC^w6%FPx`mVc2fgJ@#D^-oDT@^fs`Jdi>i4NwZ#pJ$D%0Fc3mrdoZ%g zl_UJ>WUM&d)t?aj<>cmywcJ$y=!w!s*ZMS5xVTcM;X=UcHutFG~;0AG{YjM5yWN|wh9v+yDS4n zUeGr9Nl1sYJ`a(rxGzS-h>?xZK#|;5pcksq$hFPDz0b+rrZ<$ig!cGZ57U5rfzS-1 zDwxSat^^8}h2t{0UFeF+?4ZnB&E^u%%qSSe%Xwb6il;*9b43qoO73H~MpfotnLs>Z zZ8XOb(S!;IEEm)e5N5P3jL!*1d0X7LQ``0tI|=b7h(NV5y+f4HGG4%t6P>7ICUcLu za0i1Tlh#;<)dbBo2k>ynX#H@=c;Cj4Y54){BnOljH1*Kjkz)@7qXS&_=`rQAk=V{S zAed=m-vWTx><(3T+l&J}Ukdkkq4(v@-UE3wXsqu23E>5b+Zw^mLA$D9^{f``6&Swd zSbst}T-Q6+pH1d|TWF&J*3-qV^>l^YI|1iOYi+o#*Sd^x=CC15-W(?U(CRj(=gYO5 z03ODzD)+z*Y~6T+7wQS#yBrh$-X)A@*qX$ry(R^_G)|lSHg|}c@2@l&)P&EN9oiTd zUmIZG)sv+*rUbMBvg9xx*o#s3O6B&9=YOWh(IL2LU+{7;6Q}L&;n7+7aE~v1(;hOG zg#HdWG{XApwB;TP&PqK1oFnvvL4$j9xDBVCI>k{G3e|AG3*D<%3|^in8KXDv)Gjyd zt@#&pKm#|-<;I+>v1YV%DDnn*67GjXmxF*XBK>5@D=>*QL9mIBMdD1%JkuGV@Tmof zy>$Rn0qoxAR)Tbfc&8B`D!?bI{bGaEph?&{)0%`3S*dN7hq=_|s0ci+r8ZV;#t2bk zp-wB6a{8lqyOEXkGZqxX9*t>{YhM7K)iIJtIZz8QUyN&mUrBFiO4roZ!gD<4)+yKiMxwL%|2BsH zvJU#+$KZdRgZ`};^eY_ne~3YUvx8oM4QajUl+)ks4*I+p^mjVw^JCE8>!44>pnuRo z-!BIJItP9K81x$)^g995de7d^o zgZ~}}{o8I_2mGJLvxugMNsE z{?9S!hdJmkiqZcg9Q3Ie^k+Hf_r{RF)IpDPu-3ayIsH#`&>tRyeyW51$Qbl99P~%U zpr7NQ9~^^zo`e2~81!`x`pOvejSl*P81z{OePIlG{4O*e_V_(I2K@>L{g4>+H#_K$ zi$Q<8gZ|hU^mjVwkBLEluY>-K81xT1=>G!!p~tOGx$(QsLH|w+`V9{HcVp0Ra?qa> zqy5i0=<%E8y4^bE+W)eHJ{^PpRR{f;81!#C=*PyO-{YVk7lZyi2R+6FT5me#^tazZ z|JNAw7^~u8`;QA^$dA4{NPm6|dh|6x`u73Q?ba#Re*89jkp6=h^dlVf(_+YfmV-VS zgC1kmp#0axpr7cVzdi>2R0sVHG3aMF==a6Y{~QNB)~Wklr(FNfbI|`S2LCz-{mdBr z8y)nsV$f$D^k0rakG6t`J%0ZV*II8n<@C40L4QdM{x>`5t76dK?x3%ZL4T)%9&Jju zTc=$6?{&~$8iW2p2mOaJ^uNwQk83(Dw@x|vH#q2VOlUfta`c-V^jF8Af6hUVzr~^X z>XhUEvV*=R2K}oJ`q~)uZ#w8RG3fU==oiMIf6qa`Cw*HpIkbj1Q|Ftpb=Q!xU5QBc6gZ`ly^mPvUycqgxbkP5M4E|XMeSQr7 z*E#6F6odZ?2mOsP=x=t=cgCQ<-9ev-(f&If^!;Mc-|L`%GKTyQI_Uey;J?m6-xGuX z1_%9DV$g4L&|^%e{f16C|M8rIen5=&zwDqN7=!**2mPQJ^lv)oZ;jFZJr4TYV$i?m zpuar^{eB1iH)7EDqYk$H|2JdM4|dRhD+ay(Z8V$zoiXT#Irx7&2K@*J{arEW&vMXz zCkB0~gWmkkf)xjF<8Pva{+<~8r#k3yO+>IsIsP*o^!LS}pW~qaehm6~4*J7mjQ=_Z z{lCWG-{_!!AO?NbL62)nf=$Zl|2hZ#k7CfTaL})dL4UJ@{*f5;w>#(`jX{5>gZ{@c z=O&&S~3uRlyOaM<(jOEKsNJLtE? zpdaF(|9K4hVGjDiG4waWLH|k&{%1Mp|0@Q4se}H=81hea(EmCH|EUi8qhj!%;h_KT z82slr=wFLLKhHtGBL;n)gZ}jx^o|Z(f0Kj$ zuQBMKbI^YfgZ^a)J^q$>U*&(*LI1ZH^lv)oKa4@Y$3c&K@_m*6JqP_qG3fU@=s%7@ z-;aL3*`EIkV)*~T4*J3v^g|r<{a{a{ulgJ2pzj}peuRU5Kn(h`9P~%Vpf7dM9~Fas zqJzG`L0<$h9(0SK;&7&psRS$-tr3-i3Hc8E=^ouDc1GdvuvQ@oKdDfBc5x$|YI~xe zhZ3g&h9yBX-|_u2-=(=wwVF%$dwN(WM;|O7ydDR%hy~l#OZ>~^j~;paio8>KhQF!g zYJU;csN0F{{~44GwjY1*5%~`Y2(WJ&fN;p)KU1gjZ&3bA0CmwHevu-&%A&>702?s_ zFqiygRI-@pQU0xP9+W=|n2Ucs@lO)HPJ;YfAj8GK-ogJ_C>!K|3t%q(4-x+w&6v_4 z|3?`5!jvLth@f8!`7ZhIAo=GLJ?igyI1kGI8^BQh{D5G~h<_o`>jcZ%2d)Va3))XN z(GRf;!+DT?G(&$E(T@ty2gDR-1HG&L`yBoE64VuJ|K-F#SnqShe`P@6Ag>li{y7&b z!Re>ROe=zXKF7#E5??lf!ydmc!*x*p?=$?H`^f*h4F7Tm|5qIR@i|NQ7wZ3RG^ zLj8}=M7!v}PV^I?ZuqvU@P=w151+adpNfpJiN zj4566w-W!T@ngr-cDuGY`u}wY|KTukyZC>F_)oDbg>w+scYG4)UG3jV{8LmK{qOJK zJlOt84FBi**nc-L^sf@VwjV8YQ2u3%{KYgOXnK_YErxGZ_-}LYKia|nd4~Vp#D7=>|GzNw8;Cy2{`N5P?{vsN#3BC~hr9d#l|J%673f|4 zC;BT(vE!%X9sK7q{Pz-nT80=c2JNqs;Xjo4+x};$gZ~#8{u3(|%b@=Z^8X1#e=*UY zZX{PHAcF5$$H<>@= zlO6JZmf@ekjbS)~@oP~2ISl_^NB)2rvxx|BDR&y~KY9(PR6EJNTb4 z*scG=t5y4>#{V%u@6!Lafl5+){Ecw%uV?s==p+AHhW}0n|I-}&?_&60K>X{J8qD9I z{=doa7lTyE`9z8OAL-yf@JP4*?;-xd`xim}X@-7XAN6+y(7XC?KFM$Q-d?7yEe{8u~r?;HpJB5=?EhxU(W%uyX5)qe{Z`m2dP z=>L(IecZ*+H};YK&kX&weWV{%;BNm)qMvLF3+F-mJss#>_P3YxUrh8ke#ScV-^%cR zmiRv#!GAHszX%z^aX-=H<#-4GHyQr7&sBs`@z1~>hlBq_2mgO(_$Mw^`irvvV~%#~?--(=O#P>mp#F{odYAt8k^IF( zh?f^S*#mo#B7-WlHcU|1%B>K(!(NRZR3z_E!S* zF8ysI`EC1~>X5&O;eSOR`QOCw-|65#&B6ay4F68zA7y_>9P8HKtwevm>IU;SXnzBM z-lac*Hx}Wr^;hALe=5U&8}W~d-!5eM4|VXL?%+R<;r}-AFEuS!C&Bh##_%t8@So}6 z|8<7{$(JjBrv~^#6~5zZ4F8ma|7-{UpD_HV5dShCH)Sg}w2t9FpZMGU=Mo41(L>z! zcOCJMT0fi(^e+2bP5kZkL$!l{JH!9tD^x3^+TYCZZ#`03irxOX4*mmRgA(A7|N0W~ zf5uieoCobM59nR(znl1PCwlb%mpS;K%kZCZr6LTrKgfS9!+$A$>4E;?+ z57V3P01Hk6x3K=c4fHPk72(JJ;IQo{i?}oKP5u`!+_o;{|-n0NIpqJ4;eRRdZ$jl- zN09&f4F8eDzn@61oS+rN(LK=0yz2l2PPmh zkzWi^`m^otMu+^_lim8;TiZAL>1F5-uT%6eynTm~%7Y#UdYAsUll->-S>cfX7YzRq z#6N2O%>R_T{iBF}xF@PS3(EfwM*h7H`M>Otzl`BuN&KV6UmHVzHPM#^S^4sz6*BtUc$M9cB{G--STNwU3 zh`&94Z*%bfNC&za4$l|JND%KlPFRErxzS(MR>)>pd@bP4*iv%>TdsOi&Uji@mm)| zUq_73-6!&gQ5Ql(MR3C*~iGg-l6{o z9P&>D0Z}Kx{g-vbAKZiQ2#()IhW-_zAL*kGw|^1PyY#=!A^$@T`M<&N|A_cU_5ZC5 z|DBHhU+duiF2nzfde!h-BHI5ahX2qLl%}^6J+5CLcJQC~8F&A!C;n06=V6BaS)z~9 z-;aRa)qi_QetY~p;*kF&Fc5%4_V+&VkFvkH4E@jsr8vm;9YOo8gaR)4i-xL_cKop3 zA%73Uznu6->F*|ne;M(&_4k;A|2~F)Bk_;2zjqn_^~B${zYPxlOTj_8`tR?=KWhE= z1BSle=Tx^%@%3KVf7}D~uKp`OQT3m#zb75?|B>N;5%CYk57<`w*vas3CH}VkY;^EH z1twUR{uU7bsQB$lhQ5{P;qe0B5w!nR4E>jgK5GB!#|-_qi2iIJchy!KdKlL_a)&ei_ia+JCpB{m(ku|1!fr zf3ad5CI9i@pj_=AO!QIm9}V;_`PVz-f8HT~4a0vF@ej^lD64&}XXwlONPj#SsH^=| zL_fl22Is;4KN{#=?ce5T|4Xj+GyInj|FQu8VEgAW{C5(6+yDK-!G90K|DitW@6u6j z{q-{RLH%_x^gn0lgYAEhp?{O;qx$d9K=10mp(iOxZU4R9p})#=-0dIKs5&mH|E2@I zi+?fkxBKtc4*q{;_?Hv^sQK${hW~s=`(JhNZv+9cPlD@*D~Lasm+!!`_OS@)UF~1$ z;QyL~{|gNNmBfFB%?!?i_V*0Ke>L$>5k1D=I~@E^f(MV zIQT!s@E_cy1fL$!{wEmzgFc}&Ww-xL2mcdCyW4*m@sDc%5TJLpzmoVv_s9eF|CWRQ zHirLKiT|`f`?0U=<3Abx%N_0C>EPdgjJy4>5Px_)%6A0qZ#F~!Hql4f@5Mmx(%)8x z{JS0U|A65?u33p4CI5bg{$iq!lK%rn{=#8l`}>na{`yk4{=ZKAqx@ej(7W_^Iq|ps z|6T|GO$`6F#Q$<%?<-kt=t+iuEAgLCh0*@saq$0;;XkNF5z=FvhGo$H-e>r4bF?3S zlW!2!r1f(4ShxP?6aTc~tWJXbM*_V||2v7lJ^tT!@NZ`LKS}(f`oDqUKlGDIQr%9} z|2_x*hZ+9A>LdRjG5m`i{QvIY{~^QwUE&Y!-FHA0zT?Jw30D7~BbpAo>d{&f0xq7M`k&k}tQ*K`^$7_a(YjTVgx zv5n}<;Q1Q+(DG~SaG-bTe>JuL{^L|h9Df*NYI@y%w6CD*EV#4Fx~b(Rp@tt;;|A%5juSZ4|G8|%tDO^8>$3+pT)UbC*e(}eh~cVV3+#Ov0T zcbbr2R`ag)Swj3?pZd~-{F0duk{1cFGYkTf5W5(BH-rC?!T-$Qe_`-<8T_vdj@BMN z5@KH%1SBE;#^4_^_&*rj=_aB6Jll*7Z9?FebizkM;HV5A3DKXy2Qc^`20xs^@yjaV zBO#7r@B#)un!%4{aQvc2_(%x!Lg6DJ@Cz8>BOy*=aQxy#_(+IPGWf|1Uc}(|MTGE? z5F;4;GzK5Z;Ab#6zDXZG67p-XF8my(dxePv$ z!7pHNd;>RpB*Y{JpTgi%8GIUprx+aH$P6C|fp1ENkA%QC7{frcv4p|#jfL=$5X%_+S_c0DgI~wsH!%2e2FEAc!$(4NGWZGx zzlp)|$?fow5Zw&^6$ZyAn8Qax+`{0i8T@Muej9`1lds_;A@GUR@R1Psq-gj^h;K3Y zoechM2EU8J?`H6O82oz-elLUL6M*3(A%4K%_cQnp8Tf#Nha(SNKTCC$L=j zI;K26@f1E1;>Qe*PZ))dgm{d>H!%25862O02_LYZz~E0a_$CJb8G~B4E`#EzsBG@82k+ef0M!A zV(^^|{x*Z}X7E2U_@5XY@6?2kguH{|!rx=czt7-!Cm?(z#NQcwKZAe7;2$$MY)J(U zoJnz?su1pD;&Hx81bQUgN7BDzN!w-uM+)Lw3D7w9IO6(uD>eRCs(&WcPusDQ3#_9< z^5AW2tY;_f|LFZvB!G2vsJz01PY(z&U6u?Nua!`E$MqVCYpJDp@(=#zv=IG0fX@Cy z;sZnYFC=bDt%~4pM+rfjiWb$Uq$q_JqE5>s9=!V@#3d3xK2-jCiJuU{e2Nxam34Cnf$^2uA?+1Ldd>X2QN=5R%v64;fqz;!qycAHom-KgrIdj5VeS(7vlHenQ4rU6iGq08&tr*% z_>{jOT_r>jgP+3S!x{Y33_gOvPi64a82mE~K9a#tXYex^{7eQvi^0!k@bG+!1rs7X zpDH{&pDMfrlhBb66r=@m5@JjMQI`o(%HU%e93B>M9I&74K(Srn`5g-;%w1bQSwfua z2k0sx!tnrRB^>d9!gUl(6;P587x)2#U&!F)3_gj$!*K`}Oo%B=`EY!q$|srf(-{0B z22U|~1%qGA;L{m=27}LJ@Nj&E1!4c3DPPIpmoRu0gI6>790s4u;FmJ^Wek2fgMXI6 z!|@~*g#CP`{5%G~iovgD@HB(ZXYd*ZU%=qC3|`0J;kXwICd5Lfd^jFfKAVeoG;cz9im1rz3}H9uKG z+~o)8Dj~kZ;CD0lcNzR12LB#|-^<|lG5Gfx{09tvKZE}(ga44hA7JnY8T>~K{t$!z z8-uT9@PB9UhZ+1o7UTGWd@fd_9AQ_hGOg+~;D-KhEGA82kwa|0#n%$>6;q z{0m3G@32_U!5%{;Iwiit=^uOt2~4E`I5KWED82}kM{f%_M|bo~^i zzXJSdxQ|do*ZAx;9v@NpFVXc&3KmBl>2B9?fMfl^@~09$Ctp=?IMp+j!IOXwx1NI? zMddRL-bM9XP4%}>dcQ3H7Eyc8599Bk47Z;1TudeY2)L`ijyy`W>xF)*;Q3U(7;snl z3#k0y{;J@0q`x|*{H+ZBT?YR>gMYx_A2E3U0=N7n3|`CNUt{ol03U8Whpg@V1&RNe zwCMeA)DTdnt9-e{Uoqu%J@Y00SA&<)*&3$&BNE?k%7a?uu}k8=GWY~K>wh%L^BaTf z@)IQfs=+7G*_9H1&EUHHYKi~W;JW<30gmHk#0kfuoC8cf z#e`=iKFHu&o_i&JcnE)4;zt|&6fFVhX}BmbxR&!wi4QiouK%+VKg!@*&Tha_|3`g7 zRa^>s$K!s$!6ZV*UIsr46zD2Hj=|d*{CWm|gu$O=@Mjpj-|=oak7Mvk2ET&Azt7+g zGWeT-qy8tKrBqF?A&QR(zj~Cy^^U`FC#dq932&qxI-T&*=O}vSc|9fI2=?mefi?dm@y9-gnCllV!7ul55UOWb=-`*h+|G!*6Z zp7)+kc)7%XZ{*SSv`PGAQ~!-r;=2;x87lu@5-&34%c#UfCnDeB27iIhz9{jq|9L>- zBTRX%hrdYtkA|QxCWuc`TOrNQ2iA{({8A ze)3NeKhu=ga()^NW4L&isJ(t~mH64A@~fHh|1I&qntHUJkNG6lUt;Rf^3Rg^IR@AA z-zD)6Og*~a-(wIfy5ZhneyNK85v+H}dF+IV zA&E~6;co%%@`ooBVg3D0dEKtL68D}<*L+`*_!LuK>#gV%tY@mhwLG7b__PrIFyJnE z-jL-}ro5KtFqj~Qiy;Qrb~0Y#(?j@FrhJ>kz31M~m)aNNZi$EeNw36bn)*wr{GTNr z_74T0MmcAj@~2Yy&q&;R??boiN{L@$%4_?4M&i{5*M8t*iHH5ns1e9_t|_nUc~s(I zKXV!gHr#ry{uz>Uw#2>X>UBNWO5A&{9-1$YZ%BNe;X8})-vI9F-`xz3-+>%1t~T|+ zr96sHbJueL;4VM8MB-t8xIyCcP5m`g|4E<0dKMU5uY>Trf-XP#Wr^3C^4k92mUvwV zp81Ir06m#KV4XkHo#_|7)oH1Q<}mt>^!>oUIaf_(O?*&hXW8z9I3&A$-gk zSbw9zwVXW?_uj|RcDqsHV@!FC4?Yv?DGlM}5+7^u$<(fE82llLFEQn{{97fSHFy)9 zodEI5aQO=ds^Y^4|Ek2j_XS{Dl*iK&5BuT#v$39QP5rw3`4Ydt;JUrHN!)v{N4IMm zgC98x>tAl_(e0Wo@f!@T+qG8WHyT{G>q3aDhFk9!XgQZlJnY{dlK2W!kM^IBOZ+B- zYrFcb#KV4dkHo$A5wsr|R*dp=n|icZ15BsH)VWJssy$7NDt3u-5dk~YT{&f-$`!W2!$#8L}kw^E-C1Vly z-jC4ucO`z8DG$S39)reV`LJJ_EAhKcc`av$#P2cqB&z2{i8mNr+uMNgSpWA7uH~te z_`M-~jl}OWxR!I5#G4JS>lqD(H(azBT-(nV8T>hkf8LbW^_(yP>+#-iI*-~_$>7}* z_ulU~hRQ!J@%v5v;Ev>R%(+{2_zGv?7oD zCGNf7q51wz;t!khw@~?c&_LICxeM^&)_YhdQu&`tJnTP@oQUPWVCvWUtdY3hjT7cc zk#!6{5CXR0^675HQ0ucw;*Xg6b-UI{+*r00uQ%njehOfK54YYo(e->@;u}nP zt)JZz?=-m9!&w(%JwG+Lw)0AfhyCzX5)b>~8v%Fef2Az%z0acU`DuxV{cS}#$`kgV zH%a_yBd6|{$0WYd;3p|{i=7hRWbmU2A2P`;=h+NC2JqqHXQm#lwnhL ztp?X}_DcL2gKItKPsaMcX>cw7*%E)&;MyLpm-urA*Y&KEc-X(aEb-?}d0o$m&=JF} z_iMC$ehzR~KmLm>zs=O6%l}d0FBu%dczK*X73=?n!NE<*<6()1$M11TEdNVWUe~`& z;;)48dnE3?kE6>En1=OiH|4cFmr4BB2G{cJmUwu)WG=#b!sDV_;$eHj>&KR*-e z|D!3d>v>$_e=@kPXV@$(AC`Zs#P^!=y1!1Gjpg4l_~j&LQsV!oy|a&#t11uws);WU z-ZYd{didZAq3L0%d zD=Jt}sG_C{Vt>VoG!}kpORQA!_oFS9SU^GgJm;Qs=R0@qotfPY|NZ9kNp|OZpZlEW zJm)#*Jm;J{vxh_eX3L9)x7z=8!~Z*!_pJP3!&~j#G^XV~9?Cm=t}y)9E&Oi7pA5On z-ySo()y|ilqxxHUI)N7rZ?*qZ3H<&9e(boG``ggY6RaQ3G`#WoDK}1TGQ9DC{)Cmk zLHP0ZcmB9Jf&aboXHzox{r&{`M-uo`!k4zH>FLQ92Kxt7Bd^I+4^W|d8Odz z{hfuH@8!!gwR&}XzAl$WQ~hiG`f7hiA@6UZIP5>h;s-jd`m!t{h)&?i>u?HttRJ*Xp_Y_FA8mUYOZhFoLOo zd3AqRV9#J~GQVl2PrA=o2X9in zlm3)n^+al$C8>IKw^uI{_2wqal{(0<=M~BYDNXLVV8b%&%~WqjP$5?=yxmWa4U2E` zT*@;t3wA@8X!bECW~&v?0+NpI2*8bROp z76NCePH#LrAq}un^qjkLA}xAGQ$vn7(SAqAHjQRQaP8>ERVzoO%aF^@ z;zW5(HJ6_nFJ!%}S|#eFdRyz$a&gkjs8WX?po+Ejky`WTF8&(^4t7+r|YY2dD(h@DObsq3fcNV z(XZ7qrF1rzkvElGp_*A&Dx}kC$kzONrqm=_;`N~&eqI76Gc7u%(`jc!wjQ|vjU7vG zC>i#~w|Moc?;8_B1GDv1ub1_UQnUnqCfnzwn=Dk2PW8K+y+Wx{%w&hW(Jd+3J|FF< zPppSx>mYty?qw$ZnR=nVTm8-!5Vy9N+~3CJPRbe<1}&Sd_cc6X1~0Er_p93N#gr}5 zbeVB+?6QW}8dt}+>`13KPIwz9dNuerh+Lm{u4#F1ORna-=5J7SdBcJRr*y+d@z)#o z&!?rrQZ&fn;hFNJpBVNiu#=zL>Tl{Rt{viiY+4|j@>*QouGysU@pVb97PM5mQnOyr z;e)dKTg#4bm#>6L~w>*tY)2SpDOsCY#jh<`5R)&scUbIUF4c$SRC=KqDut~YT9NXum zal zmsjztwepN)xb@xMj^4lpk$h;xYHLlD%!N%eI}4KCj{CLkB~8LNB$gWJ$;vElS|d}g zc^fPKOi4x&lc>h0uVFUc*H@ApdMdZQSRX0ROcl0nmyAG?Y11#98%DHhCBGz@j@lAp zTL<@kb;NtC?e!$voqXc;i2l^_O_gFfH`#2c36d5!F0X8_P0KKv-02ML(Ub1(v1yB`uQm&6KQV{9GxMm!?eRr*l=weRGofXY$hLtTWbSYlC@N z5LE-4w9z}?JW$q3jIC3}{T^e)7*JTY)vp%|GqN7b7kfl^zEtU{)$+NSDZMUZ`SPHQ zLRoByF|OY)PtC@j!F;h?^JjBM5KFoc%y0AZ)7wHHceR|cftjs`)9f4;6fT^*D$%x< z$i^-YT@mma9^ zuK2+eXxD!-2#=&P1<4U)5D&(0=qt@ypROlGVM#S^lo@=&lO=?f2(9C7)k+qWWafCF zwy`d8J#^U`89mP(*_a-SuDZukmGqKw`#XzA{2FTmcR(t2r@OPL^>8;qrpFg78akbFS;b4fC(OY%}lP40%M}yfUek$lR(#y#0=c=-EA!|ULN93REP?;1Z zTWj=!)U2$L9nGo+S1=vc>^PUL7i$_X(V0+pDeRmlg$EPngzNwfdNRS84qYzR(z+G6 zA*;Vl%5RczN}LyCC$AWN!6+p=Mxm0iHRIWGHdro5fX<6A(yHX<>R>6G<_n0J9+caVCsc}70SYxhj z>|01*X>3|8_ttxo0C^LY#zulMLTBgIy1`uDof(^+PVboTWYIh>ZDc30L}P53(%w4j zX2z$}8&$S-7M8#bX19$pI+|#U?wqFjeA#5l<#kgazb&J?tmz$YZN*u1ofMKh+sjgy z(`afa+%s`Wrc_IGFVDMkjm)$xB6z8cH*+mLwlp$=abwuhOYT&!8*5j&)FrQo%anI z(fW)S66U4z(SBrX9F`D3y3>>jbAv$oP3Ij$RVJI+vZ!dc&y$b?#fDI)Y& zR!y17A{dI2|z++gQ3=K__tFdCZ%R$5=M(o?Uovnt{5zL^r-o5 z+hzLG{Xo~HlZsAxUbYFf z$m|=cox?UnjDN%3Q~f30zj`E^;9*w8?oyXdywby*A!nT{=@ZYH|o0_<}DO2)% zL2h!gDo5evDe+#=eatzyWJP`LIogoBKoC95k}y)Ljlb-wf2XUu0DvkDJ70pwav@dRKEY zes)wmu}b1sP0CL z4};NdkwtVih8KQB{HE2d`vl(G5Z@I@vh;cJHKd*3H~WVOOo%ve=Pyy31U%DN~*O3W;eeRJC0oMJ9Q-8i_C5 zERAH!YkBCY<87%->uoX*H9cRKFS-MlrV+JMqx20(SJMr_rd5nrDc9ztPBQ9nLFAS~ z@!m*!CT2t)ymJ$K>?&6V<(O>`6E`xMv|9*D=kK(hYT)%xPyB+ULCq70Tz0wX zEO`dP(#)*WI!;;BX?+4d%ul&kvd05v``SESEXBIqP#)4UYb3V5zP>|a;Q)nKJ$4nB6tbJ^qTWZfcb$KY_N zoo9x__>|RFaM;-2=Xs^vHotXoga-+A^lpB*Pv(+>HyD+;XNUVTAAEaF+c~}wbqX$zl zH-`3RN}bwVPoTob+Ge%%8kn(Lsu0si=$H7f157N z!mK7%rc`oI%go9>sAPCwBMe%`)lU9S>4I5~&E!Eaqs4s!AT}-=kFNAB4`)uh($-IO zR{brxVosh=-I5ety^>V8TrbuuGLXg=9aOCCdRFe#28qn+-HZ{OC)=I{E;};Agp2$J{IGlHY&p~nZxF2a(AT9y2>ru^-t-DCd*9dP%O*#Ew@OC>wit+vE7Ukvo}6; zXq$dF>k?W!Vz`Qr>k;ZP*Bxa{@92j3e&zh0oZ88Ul^Us!yy;@WZBx<7V(=lLcDkFE zgt~IpJVC1!4xNdMj>w^$S%=22JmQb!+AjyW?(Vh%?kuRO3L4Szr_YIxE^2coRlBhe z4d<72?d)sF2g^!{6T5KTqMv=&FAvZQ@`sM{`fd5|nGhC~K=_BJfs;*#}x+UIhZN8 zMQrN}Y@1cOqX#iN%$aqY$raDwO#1E_91WK+N#JuE65rv4&Iw_}fbh;XV{gZt$E|YJ zDwl-Cce&Ws;Dff3?gj?~b9vOZ&pm3ptaU-$u@ce5O@<$7^0>L8#F-*=;2g4nNLxfZ zAtv!Qd+nMTyXU2kpfRDUHi5yuFD=_-q!=%kqq|7+i4>M54THHZJ0Q<`N#N*{XLEW+ zTRtxlJfpq5HE>vLca?03r0z412v{X(p6szp}DJ8f?pEbg|WD z=TYQz_cmtdu@pXu6K=9cwp4Wr?6Xs#3|+eQ8#4=<0|c3t>@|4^sIog@YLw-;of{=3 z4)!{e-Pk$+v3=(}Gt6;9Y1ybw%vDC~0wg(*P9X{Gr)9U&f^DD&zc-Svo&rE8Ahf zJNpO@lu}Teekt2~!Lw%O@IzD9HmP-N2sLNhZ8F~2yIF7fgkCV6cefyl)z{MKVNl03 zcw%o$UMEF++pN6R+~)IeT(ctja8M@M-~+5O^32tb&FWiR+7zELZcXe*$!?AGBWYSa z3e;1-;QN}it(y=1^srjWmKkwVN((>=bG~I1DEo;uL+sW7$@@pTdB{Dv@I2A$-x&q@sRuI&iwQqMY`*R+KginruUZ#Wk6`TQUnY z*=$>^ucgH_idq`BFXLuC*RZi-sV>Btyep?Bajn&=JbKsJF>T!GF0n4=F0(V-(rpGz z6Pcq|QOlMcn;zZLE2mgtGln}-@|lCMB}_YLdrMw8RFy68a!I~WFfX4+2*2;gtLL_+ z%@&j#yqEN$W65x3EiDf;OZq20Qofu;?FxF^uzXF2iJJlaro|vj^CoL$Pri6?vKT8A zY`2+*pk)((mwsiVSFvAiDCZ$|bKibP<{9?q(eiVl{5!ND0P^+m=B3|POzvCmkh${%kPI{u{P?i$em?`E>C59^?;#KLP$z@J05!O4ScPu`=>&&&v{c&2s&r-y-bFy#ZXmZP)Q{C-DDF z;72`2OYbpX#7aG9CGbgb{We@z?p|=}`8qh|e+EwZXW2MXbID(lz|R7w{`KGw!_NKS z`t8Ne{#z6HH^KiI@;|fO#q9wbCyzw9`=;MtMfjL)k6%N-ep|4!XN3l(yi`oTz1Z=M z;Qs|)0M~CdcJfz&KMH=M<<5T3+H))9^;?9Up8F#5MJxXxnd3p+h2 z@W;T@;Oa9c|JDS)9h~j*c5v;3PS5GjYuKYEFR))kdQQb>k0zV4!?@8d-f*%d}8x#1w3H(8D+Vd#5j%m(sPlF!={&Ed8 zc?s${7JLYtdeY$3E>cK#Hcc0LJCJCC;Wr0SuaF9xTbXMxksOTcO8esJ1(0GxK}-woDR)SnN5 z)6T=-v~#f?UsVt7d=w0-#N)KKL48kv z{JX(l2>z`Ees2Q*O#(m3CN^p(^`DWzSAo9>_M8L07Q7vxyI_b3-Z+SeQ@e|Jfi30R?pKB{+E`&W@+Gm=g-erK4iJR zWw|TCS?(Ikot|5*o(+(vp7Rs6rA-s)pFItdc6|z ztk;>4XT7e0yxMu5E%%e)EcbfoVYxRzp5@*Qd6xSiu?%?kQ<*J^A^6xYo4^t8TD$7fjyLkAH^-mR? zcJ728`sbaHr=6EUo_2l}T_0O$PvT5!(q6X2ZR^WYqpt^(J3x%vGj%U!$l+WOua;eD3h72yMxe-HZU zhaV>J2O@e_Sv@~bkbexE`M{GAJr}EE<+b2d!Ov)%kApKG*kQTz!y0SPMUZE`J^;>n z@QR2Ymk(S8dFuHjIQ3i~(Q}Qh*B2m9J-2~V&)1-bad;=>8HfJ@&iVA;p@;GROUQFR zeGKv}_i4zp+++V&qrDinBj6ghZk`$k=e)B8T;<(7_1EB(|Hkh($~|3t?DC2qfYY8| zB=Dya_z7n;^i$92;4HTnoa>0sf^)s_HE^yM{vDkC{rEo!>~V2^fsOMemPh-`so;#O zS4Q+qTRmq&p7HrcaQ5HT(8D+xg*@ZL2WNcNp@;Fg8}f|Liy+T(-wSz``w?)q<8|Oo z?f9Dbc3%xndHp-m`cnV1-TyB*&qtoJ{AiKq`N(l+sutNBlYivvELZ*aKdTYvZwBYN z$!>6-FYHa=`gf=GrTSkj|G9p&u-D)ger5tcKY?GGz(1S74<_*6Ch(=HhMhd`NG0&s zfwR4G;PmIE;PmIm6Zp@;Y0s|{_`<%1{j}#bmTP~vUDOEnL;eKG#aw$0L;i&}N7EZ# z4^BO+z+VLUwa~v9`X4&R6yGBu*mEM}PYbY#6CJM}wsP|4gw0FiO8Fy}yT3adXNrBV;K5*8zADr*Ad8a1J=j9Z%rd1U>;ydp3dF?O0>y zx!^4Kyaav$_;UE|E#PVJ^TA&Mej&I`H;g?V_*%$s1}}h9{vF^s$TNNhz!`6OaJ$VP z?(=-wP7bu+hdkqL3Va;)u-qK@R>;$SjsqWrJjbQagHJ=xH^C|Y0651nKKH_QTq|R> zzC?9T0s6z=@XNq&2d6ykd@tmaIQ{TG z$amw1KZZR0@F(E(1Lp<$;d02+4<7)hAN~}aexN+-OZg^ z^fSkE`gt$ppNa9A<>nAS9IrS&Z-zbpe|!#}hdff_Gvk5tCgb61`2VG7uRjOpc*u4f zg}m-%y7BfraLR8@;1_{^40`s0Q_uC_wDYzEZnxjeJaP^6p91-7!Ro3xZdG<`4-5pf#1Fa{ub~rgTD=&^Z3Q!%m+RJ&iV0+;CiO*{QMp8 z+rWPceiQf;;C}y!KcPQq&xfIh`3dLQ zufm=?Ab&gf{{yH0p9E+A%((gn^e_&|8E;(IGv2-lJ&d<+fzv{pR3-#(I z-su0Nc;k5cchJu`ygPw2Ut)ZI7xJ8!Igh6h|MyBCcjFK3xd(b^&-WAfz2Kbp{}Fr` z89IsR~8=mF@V z{zKqN`ng~I6UcM_nd2w@&-wan_~&1t=REKNcpjYN=QeQeKQK?@yniX=llBK5M7i|C zzkzq-&!0g)Ne}(`bI8-593SY<{g9_W9|C_S{K@<+$)6ktIBs+^4m=F|nb-XXILC*i z@rwLqX!rk0(8IXp`1VW4Q_o>=+Qasuo?k(p{f^@p>-!kwssC~Cq;YQz>dSGDdXnn< z1oTt>H{eO-rn@LN$v;m*KjY`O;4GK?wJ7&#$WssNn-qtf-+P|Zn5U?R_IIP_+0esw zUjWW=dm%XYRmfkD`jW2$e=hVe9_R;h*6V!ec@F$Z`;UQs@?*g{pB@K30{!|-rOO8_ zHs`8RY|nbzftEu4c}_@vt^j{N_-61IfbRi63Va{9mg`;z>@Ujn-*Wr@kp1a+)xI}| z%kPd~Yx(a>&Z93a^N03#eZRu~uJTJ1*jEPfZjR7P(~x(2!ph$duDT8=l-Fk>{1W^A z?g*dIo8+aRoz$1Ub$wsoFS6J5hyJ_JzCY3a)Oxu-BER+wSgt?x-#;u++SB98aeUFj zfd7$|cY5r{OnNj{^`$>tAJO;MfG<^GU$=vw;-LKeG5D$APlCS!{3Q~T`qIlTH`Dj8 z13z7XeZ2+z_Z*a;?*vy}?|*J^@jaHi`nr4eN92#SiR$Mg@)y`L?up2+vIFG*iOBzj zm47@Uf1w>o}Ti1z};M<{1I@MV<>+jqW=Mf@>*=;PV3cgNbuhP_yG6> z_#k*4dAfn zb{pj11o`{HGvJSdpAEjmPOe%nmwV{tVenDNp9j7kJZHJH^C5d}59BvM-hFR`mb(%B z0OZHO4}qTpZYE@TuX@J8m#QK1Ql2%x1^=x8p8($sz6pE}__^Twz~2mh0NkzJ^ztEa zmz$Z}jt*{CJKdb1WGVO`1|sJF72t0H-wggo;CsL?1m6elfgb?h41Nea2i~(Nc%$}j z0bdH92VVg`3BDQJ2j2re1-=h_EBFEMY4Ahf1@N9@f;VdaTftvoxi*{TMT=}+#m_Hq zgZ!JIrwCpIFM(eUJ_G(a@G|&4;1zK9T%p?kHt^$*4c;gZb6fe{eZE9_Ef6vPk3qf; zUIE_@ekJ%0@SDJQg5Lwa3;YrA-QdR`7raqB-wxgj{toal@OOe&z~2RaCHO_)H-TRa zeh>H_@JGPk4gQ4XE`EA#{46;>5Yl>G0{LO^OTo_rzYKgA_NRTXwcv$;kk;!%kUtIl&%jrMe;9lcd@uNA;2#0s4}KN+9pG1kKM4L&@C7dl-l+Y5 z4t^TATSMsO)!-k4{3Q4_;Fp143%(!x-AUQXMleed=&f!@FMu< zz%K{?JorZ}cXk%7owq>#3y?nuek1r{@SDIF|4#5m>-9zO0r0;Dp8&rZybgW~_+IcY zf!_lDW$=UGw}KxAzYToxNx>Vn|8Kwtz`p`M0sd9+I{5A2d%?d3ehc{5!4HCe1N<=f z0r163f;Vda-+~W-e-nHH{9E94@H@cwg5L>#3;4Ie4}#wXei-~a;ER7Zc%%0J9rytF z{|27`|9kLV;CF+66#Tp3w}bx!_>aNA2j27I;EmdO5BO5>?}M)ZzZZNn_& +#include +#include "lmsComms.h" +#include "INI.h" +#include +#include +#include +#include "LMS7002M_RegistersMap.h" + +#include +#include + +float_type LMS7002M::gVCO_frequency_table[3][2] = { { 3800, 5222 }, { 4961, 6754 }, {6306, 7714} }; +float_type LMS7002M::gCGEN_VCO_frequencies[2] = {2000, 2700}; + +///define for parameter enumeration if prefix might be needed +#define LMS7param(id) id + +//module addresses needs to be sorted in ascending order +const uint16_t LMS7002M::readOnlyRegisters[] = { 0x002F, 0x008C, 0x00A8, 0x00A9, 0x00AA, 0x00AB, 0x00AC, 0x0123, 0x0209, 0x020A, 0x020B, 0x040E, 0x040F }; +const uint16_t LMS7002M::readOnlyRegistersMasks[] = { 0x0000, 0x0FFF, 0x007F, 0x0000, 0x0000, 0x0000, 0x0000, 0x003F, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000 }; + +/** @brief Simple logging function to print status messages + @param text message to print + @param type message type for filtering specific information +*/ +void LMS7002M::Log(const char* text, LogType type) +{ + switch(type) + { + case LOG_INFO: + printf("%s\n", text); + break; + case LOG_WARNING: + printf("Warning: %s\n", text); + break; + case LOG_ERROR: + printf("ERROR: %s\n", text); + break; + case LOG_DATA: + printf("DATA: %s\n", text); + break; + } +} + +LMS7002M::LMS7002M() : controlPort(NULL), mRegistersMap(new LMS7002M_RegistersMap()) +{ + mRefClkSXR_MHz = 30.72; + mRefClkSXT_MHz = 30.72; +} + +/** @brief Creates LMS7002M main control object, it requires LMScomms to communicate with chip + @param controlPort data connection for controlling LMS7002 chip registers +*/ +LMS7002M::LMS7002M(LMScomms* controlPort) : + controlPort(controlPort), mRegistersMap(new LMS7002M_RegistersMap()) +{ + mRefClkSXR_MHz = 30.72; + mRefClkSXT_MHz = 30.72; + + //memory intervals for registers tests and calibration algorithms + MemorySectionAddresses[LimeLight][0] = 0x0020; + MemorySectionAddresses[LimeLight][1] = 0x002F; + MemorySectionAddresses[EN_DIR][0] = 0x0081; + MemorySectionAddresses[EN_DIR][1] = 0x0081; + MemorySectionAddresses[AFE][0] = 0x0082; + MemorySectionAddresses[AFE][1] = 0x0082; + MemorySectionAddresses[BIAS][0] = 0x0084; + MemorySectionAddresses[BIAS][1] = 0x0084; + MemorySectionAddresses[XBUF][0] = 0x0085; + MemorySectionAddresses[XBUF][1] = 0x0085; + MemorySectionAddresses[CGEN][0] = 0x0086; + MemorySectionAddresses[CGEN][1] = 0x008C; + MemorySectionAddresses[LDO][0] = 0x0092; + MemorySectionAddresses[LDO][1] = 0x00A7; + MemorySectionAddresses[BIST][0] = 0x00A8; + MemorySectionAddresses[BIST][1] = 0x00AC; + MemorySectionAddresses[CDS][0] = 0x00AD; + MemorySectionAddresses[CDS][1] = 0x00AE; + MemorySectionAddresses[TRF][0] = 0x0100; + MemorySectionAddresses[TRF][1] = 0x0104; + MemorySectionAddresses[TBB][0] = 0x0105; + MemorySectionAddresses[TBB][1] = 0x010A; + MemorySectionAddresses[RFE][0] = 0x010C; + MemorySectionAddresses[RFE][1] = 0x0114; + MemorySectionAddresses[RBB][0] = 0x0115; + MemorySectionAddresses[RBB][1] = 0x011A; + MemorySectionAddresses[SX][0] = 0x011C; + MemorySectionAddresses[SX][1] = 0x0124; + MemorySectionAddresses[TxTSP][0] = 0x0200; + MemorySectionAddresses[TxTSP][1] = 0x020C; + MemorySectionAddresses[TxNCO][0] = 0x0240; + MemorySectionAddresses[TxNCO][1] = 0x0261; + MemorySectionAddresses[TxGFIR1][0] = 0x0280; + MemorySectionAddresses[TxGFIR1][1] = 0x02A7; + MemorySectionAddresses[TxGFIR2][0] = 0x02C0; + MemorySectionAddresses[TxGFIR2][1] = 0x02E7; + MemorySectionAddresses[TxGFIR3a][0] = 0x0300; + MemorySectionAddresses[TxGFIR3a][1] = 0x0327; + MemorySectionAddresses[TxGFIR3b][0] = 0x0340; + MemorySectionAddresses[TxGFIR3b][1] = 0x0367; + MemorySectionAddresses[TxGFIR3c][0] = 0x0380; + MemorySectionAddresses[TxGFIR3c][1] = 0x03A7; + MemorySectionAddresses[RxTSP][0] = 0x0400; + MemorySectionAddresses[RxTSP][1] = 0x040F; + MemorySectionAddresses[RxNCO][0] = 0x0440; + MemorySectionAddresses[RxNCO][1] = 0x0461; + MemorySectionAddresses[RxGFIR1][0] = 0x0480; + MemorySectionAddresses[RxGFIR1][1] = 0x04A7; + MemorySectionAddresses[RxGFIR2][0] = 0x04C0; + MemorySectionAddresses[RxGFIR2][1] = 0x04E7; + MemorySectionAddresses[RxGFIR3a][0] = 0x0500; + MemorySectionAddresses[RxGFIR3a][1] = 0x0527; + MemorySectionAddresses[RxGFIR3b][0] = 0x0540; + MemorySectionAddresses[RxGFIR3b][1] = 0x0567; + MemorySectionAddresses[RxGFIR3c][0] = 0x0580; + MemorySectionAddresses[RxGFIR3c][1] = 0x05A7; + + mRegistersMap->InitializeDefaultValues(LMS7parameterList); +} + +LMS7002M::~LMS7002M() +{ + +} + +/** @brief Sends reset signal to chip, after reset enables B channel controls + @return 0-success, other-failure +*/ +liblms7_status LMS7002M::ResetChip() +{ + if (controlPort == NULL) + return LIBLMS7_NO_CONNECTION_MANAGER; + if (controlPort->IsOpen() == false) + return LIBLMS7_NOT_CONNECTED; + + LMScomms::GenericPacket pkt; + pkt.cmd = CMD_LMS7002_RST; + pkt.outBuffer.push_back(LMS_RST_PULSE); + controlPort->TransferPacket(pkt); + if (pkt.status == STATUS_COMPLETED_CMD) + { + Modify_SPI_Reg_bits(LMS7param(MIMO_SISO), 0); //enable B channel after reset + return LIBLMS7_SUCCESS; + } + else + return LIBLMS7_FAILURE; +} + +liblms7_status LMS7002M::LoadConfigLegacyFile(const char* filename) +{ + ifstream f(filename); + if (f.good() == false) //file not found + { + f.close(); + return LIBLMS7_FILE_NOT_FOUND; + } + f.close(); + uint16_t addr = 0; + uint16_t value = 0; + uint8_t ch = (uint8_t)Get_SPI_Reg_bits(LMS7param(MAC)); //remember used channel + liblms7_status status; + typedef INI ini_t; + ini_t parser(filename, true); + if (parser.select("FILE INFO") == false) + return LIBLMS7_FILE_INVALID_FORMAT; + + string type = ""; + type = parser.get("type", "undefined"); + stringstream ss; + if (type.find("LMS7002 configuration") == string::npos) + { + ss << "File " << filename << " not recognized" << endl; + return LIBLMS7_FILE_INVALID_FORMAT; + } + + int fileVersion = 0; + fileVersion = parser.get("version", 0); + + vector addrToWrite; + vector dataToWrite; + if (fileVersion == 1) + { + if (parser.select("Reference clocks")) + { + mRefClkSXR_MHz = parser.get("SXR reference frequency MHz", 30.72); + mRefClkSXT_MHz = parser.get("SXT reference frequency MHz", 30.72); + } + + if (parser.select("LMS7002 registers ch.A") == true) + { + ini_t::sectionsit_t section = parser.sections.find("LMS7002 registers ch.A"); + + uint16_t x0020_value = 0; + Modify_SPI_Reg_bits(LMS7param(MAC), 1); //select A channel + for (ini_t::keysit_t pairs = section->second->begin(); pairs != section->second->end(); pairs++) + { + sscanf(pairs->first.c_str(), "%hx", &addr); + sscanf(pairs->second.c_str(), "%hx", &value); + if (addr == LMS7param(MAC).address) //skip register containing channel selection + { + x0020_value = value; + continue; + } + addrToWrite.push_back(addr); + dataToWrite.push_back(value); + } + status = SPI_write_batch(&addrToWrite[0], &dataToWrite[0], addrToWrite.size()); + if (status != LIBLMS7_SUCCESS && status != LIBLMS7_NOT_CONNECTED) + return status; + + //parse FCW or PHO + if (parser.select("NCO Rx ch.A") == true) + { + char varname[64]; + int mode = Get_SPI_Reg_bits(LMS7param(MODE_RX)); + if (mode == 0) //FCW + { + for (int i = 0; i < 16; ++i) + { + sprintf(varname, "FCW%02i", i); + SetNCOFrequency(LMS7002M::Rx, i, parser.get(varname, 0.0)); + } + } + else + { + for (int i = 0; i < 16; ++i) + { + sprintf(varname, "PHO%02i", i); + SetNCOPhaseOffset(LMS7002M::Rx, i, parser.get(varname, 0.0)); + } + } + } + if (parser.select("NCO Tx ch.A") == true) + { + char varname[64]; + int mode = Get_SPI_Reg_bits(LMS7param(MODE_TX)); + if (mode == 0) //FCW + { + for (int i = 0; i < 16; ++i) + { + sprintf(varname, "FCW%02i", i); + SetNCOFrequency(LMS7002M::Tx, i, parser.get(varname, 0.0)); + } + } + else + { + for (int i = 0; i < 16; ++i) + { + sprintf(varname, "PHO%02i", i); + SetNCOPhaseOffset(LMS7002M::Tx, i, parser.get(varname, 0.0)); + } + } + } + status = SPI_write(0x0020, x0020_value); + if (status != LIBLMS7_SUCCESS && status != LIBLMS7_NOT_CONNECTED) + return status; + } + + Modify_SPI_Reg_bits(LMS7param(MAC), 2); + + if (parser.select("LMS7002 registers ch.B") == true) + { + addrToWrite.clear(); + dataToWrite.clear(); + ini_t::sectionsit_t section = parser.sections.find("LMS7002 registers ch.B"); + for (ini_t::keysit_t pairs = section->second->begin(); pairs != section->second->end(); pairs++) + { + sscanf(pairs->first.c_str(), "%hx", &addr); + sscanf(pairs->second.c_str(), "%hx", &value); + addrToWrite.push_back(addr); + dataToWrite.push_back(value); + } + Modify_SPI_Reg_bits(LMS7param(MAC), 2); //select B channel + status = SPI_write_batch(&addrToWrite[0], &dataToWrite[0], addrToWrite.size()); + if (status != LIBLMS7_SUCCESS && status != LIBLMS7_NOT_CONNECTED) + return status; + + //parse FCW or PHO + if (parser.select("NCO Rx ch.B") == true) + { + char varname[64]; + int mode = Get_SPI_Reg_bits(LMS7param(MODE_RX)); + if (mode == 0) //FCW + { + for (int i = 0; i < 16; ++i) + { + sprintf(varname, "FCW%02i", i); + SetNCOFrequency(LMS7002M::Rx, i, parser.get(varname, 0.0)); + } + } + else + { + for (int i = 0; i < 16; ++i) + { + sprintf(varname, "PHO%02i", i); + SetNCOPhaseOffset(LMS7002M::Rx, i, parser.get(varname, 0.0)); + } + } + } + if (parser.select("NCO Tx ch.A") == true) + { + char varname[64]; + int mode = Get_SPI_Reg_bits(LMS7param(MODE_TX)); + if (mode == 0) //FCW + { + for (int i = 0; i < 16; ++i) + { + sprintf(varname, "FCW%02i", i); + SetNCOFrequency(LMS7002M::Tx, i, parser.get(varname, 0.0)); + } + } + else + { + for (int i = 0; i < 16; ++i) + { + sprintf(varname, "PHO%02i", i); + SetNCOPhaseOffset(LMS7002M::Tx, i, parser.get(varname, 0.0)); + } + } + } + } + Modify_SPI_Reg_bits(LMS7param(MAC), ch); + return LIBLMS7_SUCCESS; + } + else + return LIBLMS7_FILE_INVALID_FORMAT; + return LIBLMS7_FAILURE; +} + +/** @brief Reads configuration file and uploads registers to chip + @param filename Configuration source file + @return 0-success, other-failure +*/ +liblms7_status LMS7002M::LoadConfig(const char* filename) +{ + ifstream f(filename); + if (f.good() == false) //file not found + { + f.close(); + return LIBLMS7_FILE_NOT_FOUND; + } + f.close(); + uint16_t addr = 0; + uint16_t value = 0; + uint8_t ch = (uint8_t)Get_SPI_Reg_bits(LMS7param(MAC)); //remember used channel + + liblms7_status status; + typedef INI ini_t; + ini_t parser(filename, true); + if (parser.select("file_info") == false) + { + //try loading as legacy format + status = LoadConfigLegacyFile(filename); + Modify_SPI_Reg_bits(MAC, 1); + return status; + } + string type = ""; + type = parser.get("type", "undefined"); + stringstream ss; + if (type.find("lms7002m_minimal_config") == string::npos) + { + ss << "File " << filename << " not recognized" << endl; + return LIBLMS7_FILE_INVALID_FORMAT; + } + + int fileVersion = 0; + fileVersion = parser.get("version", 0); + + vector addrToWrite; + vector dataToWrite; + + if (fileVersion == 1) + { + if(parser.select("lms7002_registers_a") == true) + { + ini_t::sectionsit_t section = parser.sections.find("lms7002_registers_a"); + + uint16_t x0020_value = 0; + Modify_SPI_Reg_bits(LMS7param(MAC), 1); //select A channel + for (ini_t::keysit_t pairs = section->second->begin(); pairs != section->second->end(); pairs++) + { + sscanf(pairs->first.c_str(), "%hx", &addr); + sscanf(pairs->second.c_str(), "%hx", &value); + if (addr == LMS7param(MAC).address) //skip register containing channel selection + { + x0020_value = value; + continue; + } + addrToWrite.push_back(addr); + dataToWrite.push_back(value); + } + status = SPI_write_batch(&addrToWrite[0], &dataToWrite[0], addrToWrite.size()); + if (status != LIBLMS7_SUCCESS && status != LIBLMS7_NOT_CONNECTED) + return status; + status = SPI_write(0x0020, x0020_value); + if (status != LIBLMS7_SUCCESS && status != LIBLMS7_NOT_CONNECTED) + return status; + Modify_SPI_Reg_bits(LMS7param(MAC), 2); + if (status != LIBLMS7_SUCCESS && status != LIBLMS7_NOT_CONNECTED) + return status; + } + + if (parser.select("lms7002_registers_b") == true) + { + addrToWrite.clear(); + dataToWrite.clear(); + ini_t::sectionsit_t section = parser.sections.find("lms7002_registers_b"); + for (ini_t::keysit_t pairs = section->second->begin(); pairs != section->second->end(); pairs++) + { + sscanf(pairs->first.c_str(), "%hx", &addr); + sscanf(pairs->second.c_str(), "%hx", &value); + addrToWrite.push_back(addr); + dataToWrite.push_back(value); + } + Modify_SPI_Reg_bits(LMS7param(MAC), 2); //select B channel + status = SPI_write_batch(&addrToWrite[0], &dataToWrite[0], addrToWrite.size()); + if (status != LIBLMS7_SUCCESS && status != LIBLMS7_NOT_CONNECTED) + return status; + } + Modify_SPI_Reg_bits(LMS7param(MAC), ch); + + parser.select("reference_clocks"); + mRefClkSXR_MHz = parser.get("sxr_ref_clk_mhz", 30.72); + mRefClkSXT_MHz = parser.get("sxt_ref_clk_mhz", 30.72); + } + + Modify_SPI_Reg_bits(MAC, 1); + if (controlPort == NULL) + return LIBLMS7_NO_CONNECTION_MANAGER; + if (controlPort->IsOpen() == false) + return LIBLMS7_NOT_CONNECTED; + return LIBLMS7_SUCCESS; +} + +/** @brief Reads all registers from chip and saves to file + @param filename destination filename + @return 0-success, other failure +*/ +liblms7_status LMS7002M::SaveConfig(const char* filename) +{ + liblms7_status status; + typedef INI<> ini_t; + ini_t parser(filename, true); + parser.create("file_info"); + parser.set("type", "lms7002m_minimal_config"); + parser.set("version", 1); + + char addr[80]; + char value[80]; + + uint8_t ch = (uint8_t)Get_SPI_Reg_bits(LMS7param(MAC)); + + vector addrToRead; + for (uint8_t i = 0; i < MEMORY_SECTIONS_COUNT; ++i) + for (uint16_t addr = MemorySectionAddresses[i][0]; addr <= MemorySectionAddresses[i][1]; ++addr) + addrToRead.push_back(addr); + vector dataReceived; + dataReceived.resize(addrToRead.size(), 0); + + parser.create("lms7002_registers_a"); + Modify_SPI_Reg_bits(LMS7param(MAC), 1); + for (uint16_t i = 0; i < addrToRead.size(); ++i) + { + dataReceived[i] = Get_SPI_Reg_bits(addrToRead[i], 15, 0, false); + sprintf(addr, "0x%04X", addrToRead[i]); + sprintf(value, "0x%04X", dataReceived[i]); + parser.set(addr, value); + } + + parser.create("lms7002_registers_b"); + addrToRead.clear(); //add only B channel addresses + for (uint8_t i = 0; i < MEMORY_SECTIONS_COUNT; ++i) + for (uint16_t addr = MemorySectionAddresses[i][0]; addr <= MemorySectionAddresses[i][1]; ++addr) + if (addr >= 0x0100) + addrToRead.push_back(addr); + + Modify_SPI_Reg_bits(LMS7param(MAC), 2); + for (uint16_t i = 0; i < addrToRead.size(); ++i) + { + dataReceived[i] = Get_SPI_Reg_bits(addrToRead[i], 15, 0, false); + sprintf(addr, "0x%04X", addrToRead[i]); + sprintf(value, "0x%04X", dataReceived[i]); + parser.set(addr, value); + } + + Modify_SPI_Reg_bits(LMS7param(MAC), ch); //retore previously used channel + + parser.create("reference_clocks"); + parser.set("sxt_ref_clk_mhz", mRefClkSXT_MHz); + parser.set("sxr_ref_clk_mhz", mRefClkSXR_MHz); + parser.save(filename); + return LIBLMS7_SUCCESS; +} + +/** @brief Returns reference clock in MHz used for SXT or SXR + @param Tx transmitter or receiver selection +*/ +float_type LMS7002M::GetReferenceClk_SX(bool tx) +{ + return tx ? mRefClkSXT_MHz : mRefClkSXR_MHz; +} + +/** @return Current CLKGEN frequency in MHz + Returned frequency depends on reference clock used for Receiver +*/ +float_type LMS7002M::GetFrequencyCGEN_MHz() +{ + float_type dMul = (mRefClkSXR_MHz/2.0)/(Get_SPI_Reg_bits(LMS7param(DIV_OUTCH_CGEN))+1); //DIV_OUTCH_CGEN + uint16_t gINT = Get_SPI_Reg_bits(0x0088, 13, 0); //read whole register to reduce SPI transfers + uint32_t gFRAC = ((gINT & 0xF) * 65536) | Get_SPI_Reg_bits(0x0087, 15, 0); + return dMul * (((gINT>>4) + 1 + gFRAC/1048576.0)); +} + +/** @brief Returns TSP reference frequency + @param tx TxTSP or RxTSP selection + @return TSP reference frequency in MHz +*/ +float_type LMS7002M::GetReferenceClk_TSP_MHz(bool tx) +{ + float_type cgenFreq = GetFrequencyCGEN_MHz(); + float_type clklfreq = cgenFreq/pow(2.0, Get_SPI_Reg_bits(LMS7param(CLKH_OV_CLKL_CGEN))); + if(Get_SPI_Reg_bits(LMS7param(EN_ADCCLKH_CLKGN)) == 0) + return tx ? clklfreq : cgenFreq/4.0; + else + return tx ? cgenFreq : clklfreq/4.0; +} + +/** @brief Sets CLKGEN frequency, calculations use receiver'r reference clock + @param freq_MHz desired frequency in MHz + @return 0-succes, other-cannot deliver desired frequency +*/ +liblms7_status LMS7002M::SetFrequencyCGEN(const float_type freq_MHz) +{ + float_type dFvco; + float_type dFrac; + int16_t iHdiv; + + //VCO frequency selection according to F_CLKH + iHdiv = (int16_t)((gCGEN_VCO_frequencies[1]/ 2) / freq_MHz) - 1; + dFvco = 2*(iHdiv+1) * freq_MHz; + + //Integer division + uint16_t gINT = (uint16_t)(dFvco/mRefClkSXR_MHz - 1); + + //Fractional division + dFrac = dFvco/mRefClkSXR_MHz - (uint32_t)(dFvco/mRefClkSXR_MHz); + uint32_t gFRAC = (uint32_t)(dFrac * 1048576); + + Modify_SPI_Reg_bits(LMS7param(INT_SDM_CGEN), gINT); //INT_SDM_CGEN + Modify_SPI_Reg_bits(0x0087, 15, 0, gFRAC&0xFFFF); //INT_SDM_CGEN[15:0] + Modify_SPI_Reg_bits(0x0088, 3, 0, gFRAC>>16); //INT_SDM_CGEN[19:16] + Modify_SPI_Reg_bits(LMS7param(DIV_OUTCH_CGEN), iHdiv); //DIV_OUTCH_CGEN + + return TuneVCO(VCO_CGEN); +} + +/** @brief Performs VCO tuning operations for CLKGEN, SXR, SXT modules + @param module module selection for tuning 0-cgen, 1-SXR, 2-SXT + @return 0-success, other-failure +*/ +liblms7_status LMS7002M::TuneVCO(VCO_Module module) // 0-cgen, 1-SXR, 2-SXT +{ + if (controlPort == NULL) + return LIBLMS7_NO_CONNECTION_MANAGER; + if (controlPort->IsOpen() == false) + return LIBLMS7_NOT_CONNECTED; + int8_t i; + uint8_t cmphl; //comparators + int16_t csw_lowest = -1; + uint16_t addrVCOpd; // VCO power down address + uint16_t addrCSW_VCO; + uint16_t addrCMP; //comparator address + uint8_t lsb; //SWC lsb index + uint8_t msb; //SWC msb index + + uint8_t ch = (uint8_t)Get_SPI_Reg_bits(LMS7param(MAC)); //remember used channel + + if(module != VCO_CGEN) //set addresses to SX module + { + Modify_SPI_Reg_bits(LMS7param(MAC), module); + addrVCOpd = LMS7param(PD_VCO).address; + addrCSW_VCO = LMS7param(CSW_VCO).address; + lsb = LMS7param(CSW_VCO).lsb; + msb = LMS7param(CSW_VCO).msb; + addrCMP = LMS7param(VCO_CMPHO).address; + } + else //set addresses to CGEN module + { + addrVCOpd = LMS7param(PD_VCO_CGEN).address; + addrCSW_VCO = LMS7param(CSW_VCO_CGEN).address; + lsb = LMS7param(CSW_VCO_CGEN).lsb; + msb = LMS7param(CSW_VCO_CGEN).msb; + addrCMP = LMS7param(VCO_CMPHO_CGEN).address; + } + // Initialization + Modify_SPI_Reg_bits (addrVCOpd, 2, 1, 0); //activate VCO and comparator + if (Get_SPI_Reg_bits(addrVCOpd, 2, 1) != 0) + return LIBLMS7_VCO_IS_POWERED_DOWN; + if(module == VCO_CGEN) + Modify_SPI_Reg_bits(LMS7param(SPDUP_VCO_CGEN), 1); //SHORT_NOISEFIL=1 SPDUP_VCO_ Short the noise filter resistor to speed up the settling time + else + Modify_SPI_Reg_bits(LMS7param(SPDUP_VCO), 1); //SHORT_NOISEFIL=1 SPDUP_VCO_ Short the noise filter resistor to speed up the settling time + Modify_SPI_Reg_bits (addrCSW_VCO , msb, lsb , 0); //Set SWC_VCO<7:0>=<00000000> + + i=7; + while(i>=0) + { + Modify_SPI_Reg_bits (addrCSW_VCO, lsb + i, lsb + i, 1); // CSW_VCO=1 + std::this_thread::sleep_for(std::chrono::milliseconds(5)); + cmphl = (uint8_t)Get_SPI_Reg_bits(addrCMP, 13, 12); + if ( (cmphl&0x01) == 1) // reduce CSW + Modify_SPI_Reg_bits (addrCSW_VCO, lsb + i, lsb + i, 0); // CSW_VCO=0 + if( cmphl == 2 && csw_lowest < 0) + csw_lowest = Get_SPI_Reg_bits(addrCSW_VCO, msb, lsb); + --i; + } + if(csw_lowest >= 0) + { + uint16_t csw_highest = Get_SPI_Reg_bits(addrCSW_VCO, msb, lsb); + if(csw_lowest == csw_highest) + { + while(csw_lowest>=0) + { + Modify_SPI_Reg_bits(addrCSW_VCO, msb, lsb, csw_lowest); + std::this_thread::sleep_for(std::chrono::milliseconds(5)); + if(Get_SPI_Reg_bits(addrCMP, 13, 12) == 0) + { + ++csw_lowest; + break; + } + else + --csw_lowest; + } + } + Modify_SPI_Reg_bits(addrCSW_VCO, msb, lsb, csw_lowest+(csw_highest-csw_lowest)/2); + } + if (module == VCO_CGEN) + Modify_SPI_Reg_bits(LMS7param(SPDUP_VCO_CGEN), 0); //SHORT_NOISEFIL=1 SPDUP_VCO_ Short the noise filter resistor to speed up the settling time + else + Modify_SPI_Reg_bits(LMS7param(SPDUP_VCO), 0); //SHORT_NOISEFIL=1 SPDUP_VCO_ Short the noise filter resistor to speed up the settling time + cmphl = (uint8_t)Get_SPI_Reg_bits(addrCMP, 13, 12); + Modify_SPI_Reg_bits(LMS7param(MAC), ch); //restore previously used channel + if(cmphl == 2) + return LIBLMS7_SUCCESS; + else + return LIBLMS7_FAILURE; +} + +/** @brief Returns given parameter value from chip register + @param param LMS7002M control parameter + @param fromChip read directly from chip + @return parameter value +*/ +uint16_t LMS7002M::Get_SPI_Reg_bits(const LMS7Parameter ¶m, bool fromChip) +{ + return Get_SPI_Reg_bits(param.address, param.msb, param.lsb, fromChip); +} + +/** @brief Returns given parameter value from chip register + @param address register address + @param msb most significant bit index + @param lsb least significant bit index + @param fromChip read directly from chip + @return register bits from selected interval, shifted to right by lsb bits +*/ +uint16_t LMS7002M::Get_SPI_Reg_bits(uint16_t address, uint8_t msb, uint8_t lsb, bool fromChip) +{ + return (SPI_read(address, fromChip) & (~(~0<<(msb+1)))) >> lsb; //shift bits to LSB +} + +/** @brief Change given parameter value + @param param LMS7002M control parameter + @param fromChip read initial value directly from chip + @param value new parameter value +*/ +liblms7_status LMS7002M::Modify_SPI_Reg_bits(const LMS7Parameter ¶m, const uint16_t value, bool fromChip) +{ + return Modify_SPI_Reg_bits(param.address, param.msb, param.lsb, value, fromChip); +} + +/** @brief Change given parameter value + @param address register address + @param value new bits value, the value is shifted left by lsb bits + @param fromChip read initial value directly from chip +*/ +liblms7_status LMS7002M::Modify_SPI_Reg_bits(const uint16_t address, const uint8_t msb, const uint8_t lsb, const uint16_t value, bool fromChip) +{ + uint16_t spiDataReg = SPI_read(address, fromChip); //read current SPI reg data + uint16_t spiMask = (~(~0 << (msb - lsb + 1))) << (lsb); // creates bit mask + spiDataReg = (spiDataReg & (~spiMask)) | ((value << lsb) & spiMask);//clear bits + return SPI_write(address, spiDataReg); //write modified data back to SPI reg +} + +/** @brief Modifies given registers with values applied using masks + @param addr array of register addresses + @param masks array of applied masks + @param values array of values to be written + @param start starting index of given arrays + @param stop end index of given arrays +*/ +liblms7_status LMS7002M::Modify_SPI_Reg_mask(const uint16_t *addr, const uint16_t *masks, const uint16_t *values, uint8_t start, uint8_t stop) +{ + liblms7_status status; + uint16_t reg_data; + vector addresses; + vector data; + while (start <= stop) + { + reg_data = SPI_read(addr[start], true, &status); //read current SPI reg data + reg_data &= ~masks[start];//clear bits + reg_data |= (values[start] & masks[start]); + addresses.push_back(addr[start]); + data.push_back(reg_data); + ++start; + } + if (status != LIBLMS7_SUCCESS) + return status; + SPI_write_batch(&addresses[0], &data[0], addresses.size()); + return status; +} + +/** @brief Sets SX frequency + @param Tx Rx/Tx module selection + @param freq_MHz desired frequency in MHz + @param refClk_MHz reference clock in MHz + @return 0-success, other-cannot deliver requested frequency +*/ +liblms7_status LMS7002M::SetFrequencySX(bool tx, float_type freq_MHz, float_type refClk_MHz) +{ + if (controlPort == NULL) + return LIBLMS7_NO_CONNECTION_MANAGER; + if (controlPort->IsOpen() == false) + return LIBLMS7_NOT_CONNECTED; + const uint8_t sxVCO_N = 2; //number of entries in VCO frequencies + const float_type m_dThrF = 5500; //threshold to enable additional divider + uint8_t ch; //remember used channel + float_type VCOfreq; + int8_t div_loch; + int8_t sel_vco; + bool canDeliverFrequency = false; + uint16_t integerPart; + uint32_t fractionalPart; + int8_t i; + + //find required VCO frequency + for (div_loch = 6; div_loch >= 0; --div_loch) + { + VCOfreq = (1 << (div_loch + 1)) * freq_MHz; + if ((VCOfreq >= gVCO_frequency_table[0][0]) && (VCOfreq <= gVCO_frequency_table[2][sxVCO_N - 1])) + { + canDeliverFrequency = true; + break; + } + } + if (canDeliverFrequency == false) + return LIBLMS7_CANNOT_DELIVER_FREQUENCY; + + integerPart = (uint16_t)(VCOfreq / (refClk_MHz * (1 + (VCOfreq > m_dThrF))) - 4); + fractionalPart = (uint32_t)((VCOfreq / (refClk_MHz * (1 + (VCOfreq > m_dThrF))) - (uint32_t)(VCOfreq / (refClk_MHz * (1 + (VCOfreq > m_dThrF))))) * 1048576); + + ch = (uint8_t)Get_SPI_Reg_bits(LMS7param(MAC)); + Modify_SPI_Reg_bits(LMS7param(MAC), tx + 1); + Modify_SPI_Reg_bits(LMS7param(INT_SDM), integerPart); //INT_SDM + Modify_SPI_Reg_bits(0x011D, 15, 0, fractionalPart & 0xFFFF); //FRAC_SDM[15:0] + Modify_SPI_Reg_bits(0x011E, 3, 0, (fractionalPart >> 16)); //FRAC_SDM[19:16] + Modify_SPI_Reg_bits(LMS7param(DIV_LOCH), div_loch); //DIV_LOCH + Modify_SPI_Reg_bits(LMS7param(EN_DIV2_DIVPROG), (VCOfreq > m_dThrF)); //EN_DIV2_DIVPROG + + //find which VCO supports required frequency + Modify_SPI_Reg_bits(LMS7param(PD_VCO), 0); // + Modify_SPI_Reg_bits(LMS7param(PD_VCO_COMP), 0); // + int cswBackup = Get_SPI_Reg_bits(LMS7param(CSW_VCO)); //remember to restore previous tune value + canDeliverFrequency = false; + int tuneScore[] = { -128, -128, -128 }; //best is closest to 0 + for (sel_vco = 0; sel_vco < 3; ++sel_vco) + { + Modify_SPI_Reg_bits(LMS7param(SEL_VCO), sel_vco); + liblms7_status status = TuneVCO(tx ? VCO_SXT : VCO_SXR); + int csw = Get_SPI_Reg_bits(LMS7param(CSW_VCO), true); + tuneScore[sel_vco] = -128 + csw; + if (status == LIBLMS7_SUCCESS) + canDeliverFrequency = true; + } + if (abs(tuneScore[0]) < abs(tuneScore[1])) + { + if (abs(tuneScore[0]) < abs(tuneScore[2])) + sel_vco = 0; + else + sel_vco = 2; + } + else + { + if (abs(tuneScore[1]) < abs(tuneScore[2])) + sel_vco = 1; + else + sel_vco = 2; + } + Modify_SPI_Reg_bits(LMS7param(SEL_VCO), sel_vco); + Modify_SPI_Reg_bits(LMS7param(CSW_VCO), cswBackup); + Modify_SPI_Reg_bits(LMS7param(MAC), ch); //restore used channel + if (tx) + mRefClkSXT_MHz = refClk_MHz; + else + mRefClkSXR_MHz = refClk_MHz; + if (canDeliverFrequency == false) + return LIBLMS7_CANNOT_DELIVER_FREQUENCY; + return TuneVCO( tx ? VCO_SXT : VCO_SXR); //Rx-1, Tx-2 +} + +/** @brief Returns currently set SXR/SXT frequency + @return SX frequency MHz +*/ +float_type LMS7002M::GetFrequencySX_MHz(bool Tx, float_type refClk_MHz) +{ + uint8_t ch = (uint8_t)Get_SPI_Reg_bits(LMS7param(MAC)); //remember previously used channel + float_type dMul; + if(Tx) + Modify_SPI_Reg_bits(LMS7param(MAC), 2); // Rx mac = 1, Tx max = 2 + else + Modify_SPI_Reg_bits(LMS7param(MAC), 1); // Rx mac = 1, Tx max = 2 + uint16_t gINT = Get_SPI_Reg_bits(0x011E, 13, 0); // read whole register to reduce SPI transfers + uint32_t gFRAC = ((gINT&0xF) * 65536) | Get_SPI_Reg_bits(0x011D, 15, 0); + + dMul = (float_type)refClk_MHz / (1 << (Get_SPI_Reg_bits(LMS7param(DIV_LOCH)) + 1)); + //Calculate real frequency according to the calculated parameters + dMul = dMul * ((gINT >> 4) + 4 + (float_type)gFRAC / 1048576.0) * (Get_SPI_Reg_bits(LMS7param(EN_DIV2_DIVPROG)) + 1); + Modify_SPI_Reg_bits(LMS7param(MAC), ch); //restore used channel + return dMul; +} + +/** @brief Loads given DC_REG values into registers + @param tx TxTSP or RxTSP selection + @param I DC_REG I value + @param Q DC_REG Q value +*/ +liblms7_status LMS7002M::LoadDC_REG_IQ(bool tx, int16_t I, int16_t Q) +{ + if(tx) + { + Modify_SPI_Reg_bits(LMS7param(DC_REG_TXTSP), I); + Modify_SPI_Reg_bits(LMS7param(TSGDCLDI_TXTSP), 0); + Modify_SPI_Reg_bits(LMS7param(TSGDCLDI_TXTSP), 1); + Modify_SPI_Reg_bits(LMS7param(TSGDCLDI_TXTSP), 0); + Modify_SPI_Reg_bits(LMS7param(DC_REG_TXTSP), Q); + Modify_SPI_Reg_bits(LMS7param(TSGDCLDQ_TXTSP), 0); + Modify_SPI_Reg_bits(LMS7param(TSGDCLDQ_TXTSP), 1); + Modify_SPI_Reg_bits(LMS7param(TSGDCLDQ_TXTSP), 0); + Modify_SPI_Reg_bits(LMS7param(DC_BYP_TXTSP), 0); //DC_BYP + } + else + { + Modify_SPI_Reg_bits(LMS7param(DC_REG_RXTSP), I); + Modify_SPI_Reg_bits(LMS7param(TSGDCLDI_RXTSP), 0); + Modify_SPI_Reg_bits(LMS7param(TSGDCLDI_RXTSP), 1); + Modify_SPI_Reg_bits(LMS7param(TSGDCLDI_RXTSP), 0); + Modify_SPI_Reg_bits(LMS7param(DC_REG_TXTSP), Q); + Modify_SPI_Reg_bits(LMS7param(TSGDCLDQ_RXTSP), 0); + Modify_SPI_Reg_bits(LMS7param(TSGDCLDQ_RXTSP), 1); + Modify_SPI_Reg_bits(LMS7param(TSGDCLDQ_RXTSP), 0); + Modify_SPI_Reg_bits(LMS7param(DC_BYP_RXTSP), 0); //DC_BYP + } + return LIBLMS7_SUCCESS; +} + +/** @brief Sets chosen NCO's frequency + @param tx transmitter or receiver selection + @param index NCO index from 0 to 15 + @param freq_MHz desired NCO frequency + @return 0-success, other-failure +*/ +liblms7_status LMS7002M::SetNCOFrequency(bool tx, uint8_t index, float_type freq_MHz) +{ + if(index > 15) + return LIBLMS7_INDEX_OUT_OF_RANGE; + float_type refClk_MHz = GetReferenceClk_TSP_MHz(tx); + uint16_t addr = tx ? 0x0240 : 0x0440; + uint32_t fcw = (uint32_t)((freq_MHz/refClk_MHz)*4294967296); + SPI_write(addr+2+index*2, (fcw >> 16)); //NCO frequency control word register MSB part. + SPI_write(addr+3+index*2, fcw); //NCO frequency control word register LSB part. + return LIBLMS7_SUCCESS; +} + +/** @brief Returns chosen NCO's frequency in MHz + @param tx transmitter or receiver selection + @param index NCO index from 0 to 15 + @param fromChip read frequency directly from chip or local registers + @return NCO frequency in MHz +*/ +float_type LMS7002M::GetNCOFrequency_MHz(bool tx, uint8_t index, const float_type refClk_MHz, bool fromChip) +{ + if(index > 15) + return LIBLMS7_INDEX_OUT_OF_RANGE; + uint16_t addr = tx ? 0x0240 : 0x0440; + uint32_t fcw = 0; + fcw |= SPI_read(addr + 2 + index * 2, fromChip) << 16; //NCO frequency control word register MSB part. + fcw |= SPI_read(addr + 3 + index * 2, fromChip); //NCO frequency control word register LSB part. + return refClk_MHz*(fcw/4294967296.0); +} + +/** @brief Sets chosen NCO phase offset angle when memory table MODE is 0 +@param tx transmitter or receiver selection +@param angle_deg phase offset angle in degrees +@return 0-success, other-failure +*/ +liblms7_status LMS7002M::SetNCOPhaseOffsetForMode0(bool tx, float_type angle_deg) +{ + uint16_t addr = tx ? 0x0241 : 0x0441; + uint16_t pho = (uint16_t)(65536 * (angle_deg / 360 )); + SPI_write(addr, pho); + return LIBLMS7_SUCCESS; +} + +/** @brief Sets chosen NCO's phase offset angle + @param tx transmitter or receiver selection + @param index PHO index from 0 to 15 + @param angle_deg phase offset angle in degrees + @return 0-success, other-failure +*/ +liblms7_status LMS7002M::SetNCOPhaseOffset(bool tx, uint8_t index, float_type angle_deg) +{ + if(index > 15) + return LIBLMS7_INDEX_OUT_OF_RANGE; + uint16_t addr = tx ? 0x0244 : 0x0444; + uint16_t pho = (uint16_t)(65536*(angle_deg / 360)); + SPI_write(addr+index, pho); + return LIBLMS7_SUCCESS; +} + +/** @brief Returns chosen NCO's phase offset angle in radians + @param tx transmitter or receiver selection + @param index PHO index from 0 to 15 + @return phase offset angle in degrees +*/ +float_type LMS7002M::GetNCOPhaseOffset_Deg(bool tx, uint8_t index) +{ + uint16_t addr = tx ? 0x0244 : 0x0444; + uint16_t pho = SPI_read(addr+index); + float_type angle = 360*pho/65536.0; + return angle; +} + +/** @brief Uploads given FIR coefficients to chip + @param tx Transmitter or receiver selection + @param GFIR_index GIR index from 0 to 2 + @param coef array of coefficients + @param coefCount number of coefficients + @return 0-success, other-failure + + This function does not change GFIR*_L or GFIR*_N parameters, they have to be set manually +*/ +liblms7_status LMS7002M::SetGFIRCoefficients(bool tx, uint8_t GFIR_index, const int16_t *coef, uint8_t coefCount) +{ + uint8_t index; + uint8_t coefLimit; + uint16_t startAddr; + if (GFIR_index == 0) + startAddr = 0x0280; + else if (GFIR_index == 1) + startAddr = 0x02C0; + else + startAddr = 0x0300; + + if (tx == false) + startAddr += 0x0200; + if (GFIR_index < 2) + coefLimit = 40; + else + coefLimit = 120; + if (coefCount > coefLimit) + return LIBLMS7_TOO_MANY_VALUES; + vector addresses; + for (index = 0; index < coefCount; ++index) + addresses.push_back(startAddr + index + 24 * (index / 40)); + SPI_write_batch(&addresses[0], (uint16_t*)coef, coefCount); + return LIBLMS7_SUCCESS; +} + +/** @brief Returns currently loaded FIR coefficients + @param tx Transmitter or receiver selection + @param GFIR_index GIR index from 0 to 2 + @param coef array of returned coefficients + @param coefCount number of coefficients to read + @return 0-success, other-failure +*/ +liblms7_status LMS7002M::GetGFIRCoefficients(bool tx, uint8_t GFIR_index, int16_t *coef, uint8_t coefCount) +{ + liblms7_status status = LIBLMS7_FAILURE; + uint8_t index; + uint8_t coefLimit; + uint16_t startAddr; + if(GFIR_index == 0) + startAddr = 0x0280; + else if (GFIR_index == 1) + startAddr = 0x02C0; + else + startAddr = 0x0300; + + if (tx == false) + startAddr += 0x0200; + if (GFIR_index < 2) + coefLimit = 40; + else + coefLimit = 120; + if (coefCount > coefLimit) + return LIBLMS7_TOO_MANY_VALUES; + + std::vector addresses; + for (index = 0; index < coefCount; ++index) + addresses.push_back(startAddr + index + 24 * (index / 40)); + uint16_t spiData[120]; + memset(spiData, 0, 120 * sizeof(uint16_t)); + if (controlPort->IsOpen()) + { + status = SPI_read_batch(&addresses[0], spiData, coefCount); + for (index = 0; index < coefCount; ++index) + coef[index] = spiData[index]; + } + else + { + const int channel = Get_SPI_Reg_bits(LMS7param(MAC), false) > 1 ? 1 : 0; + for (index = 0; index < coefCount; ++index) + coef[index] = mRegistersMap->GetValue(channel, addresses[index]); + status = LIBLMS7_SUCCESS; + } + + return status; +} + +/** @brief Write given data value to whole register + @param address SPI address + @param data new register value + @return 0-succes, other-failure +*/ +liblms7_status LMS7002M::SPI_write(uint16_t address, uint16_t data) +{ + if (controlPort == NULL) + return LIBLMS7_NO_CONNECTION_MANAGER; + + if ((mRegistersMap->GetValue(0, LMS7param(MAC).address) & 0x0003) > 1 && address >= 0x0100) + mRegistersMap->SetValue(1, address, data); + else + mRegistersMap->SetValue(0, address, data); + + if (controlPort->IsOpen() == false) + return LIBLMS7_NOT_CONNECTED; + + LMScomms::GenericPacket pkt; + pkt.cmd = CMD_LMS7002_WR; + pkt.outBuffer.push_back(address >> 8); + pkt.outBuffer.push_back(address & 0xFF); + pkt.outBuffer.push_back(data >> 8); + pkt.outBuffer.push_back(data & 0xFF); + controlPort->TransferPacket(pkt); + if (pkt.status == STATUS_COMPLETED_CMD) + return LIBLMS7_SUCCESS; + else + return LIBLMS7_FAILURE; +} + +/** @brief Reads whole register value from given address + @param address SPI address + @param status operation status(optional) + @param fromChip read value directly from chip + @return register value +*/ +uint16_t LMS7002M::SPI_read(uint16_t address, bool fromChip, liblms7_status *status) +{ + if (controlPort == NULL) + { + if (status) + *status = LIBLMS7_NO_CONNECTION_MANAGER; + } + if (controlPort->IsOpen() == false || fromChip == false) + { + if ((mRegistersMap->GetValue(0, LMS7param(MAC).address) & 0x0003) > 1 && address >= 0x0100) + return mRegistersMap->GetValue(1, address); + else + return mRegistersMap->GetValue(0, address); + } + + LMScomms::GenericPacket pkt; + pkt.cmd = CMD_LMS7002_RD; + pkt.outBuffer.push_back(address >> 8); + pkt.outBuffer.push_back(address & 0xFF); + if (controlPort->TransferPacket(pkt) == LMScomms::TRANSFER_SUCCESS) + { + if (status) + *status = (pkt.status == STATUS_COMPLETED_CMD ? LIBLMS7_SUCCESS : LIBLMS7_FAILURE); + return (pkt.inBuffer[2] << 8) | pkt.inBuffer[3]; + } + else + return 0; +} + +/** @brief Batches multiple register writes into least ammount of transactions + @param spiAddr spi register addresses to be written + @param spiData registers data to be written + @param cnt number of registers to write + @return 0-success, other-failure +*/ +liblms7_status LMS7002M::SPI_write_batch(const uint16_t* spiAddr, const uint16_t* spiData, uint16_t cnt) +{ + LMScomms::GenericPacket pkt; + pkt.cmd = CMD_LMS7002_WR; + uint32_t index = 0; + for (uint32_t i = 0; i < cnt; ++i) + { + pkt.outBuffer.push_back(spiAddr[i] >> 8); + pkt.outBuffer.push_back(spiAddr[i] & 0xFF); + pkt.outBuffer.push_back(spiData[i] >> 8); + pkt.outBuffer.push_back(spiData[i] & 0xFF); + + if ((mRegistersMap->GetValue(0, LMS7param(MAC).address) & 0x0003) > 1) + mRegistersMap->SetValue(1, spiAddr[i], spiData[i]); + else + mRegistersMap->SetValue(0, spiAddr[i], spiData[i]); + + } + if (controlPort == NULL) + return LIBLMS7_NO_CONNECTION_MANAGER; + if (controlPort->IsOpen() == false) + return LIBLMS7_NOT_CONNECTED; + + controlPort->TransferPacket(pkt); + if (pkt.status == STATUS_COMPLETED_CMD) + return LIBLMS7_SUCCESS; + else + return LIBLMS7_FAILURE; +} + +/** @brief Batches multiple register reads into least amount of transactions + @param spiAddr SPI addresses to read + @param spiData array for read data + @param cnt number of registers to read + @return 0-success, other-failure +*/ +liblms7_status LMS7002M::SPI_read_batch(const uint16_t* spiAddr, uint16_t* spiData, uint16_t cnt) +{ + LMScomms::GenericPacket pkt; + pkt.cmd = CMD_LMS7002_RD; + uint32_t index = 0; + for (uint32_t i = 0; i < cnt; ++i) + { + pkt.outBuffer.push_back(spiAddr[i] >> 8); + pkt.outBuffer.push_back(spiAddr[i] & 0xFF); + } + if (controlPort == NULL) + return LIBLMS7_NO_CONNECTION_MANAGER; + if (controlPort->IsOpen() == false) + return LIBLMS7_NOT_CONNECTED; + + LMScomms::TransferStatus status = controlPort->TransferPacket(pkt); + if (status != LMScomms::TRANSFER_SUCCESS) + return LIBLMS7_FAILURE; + + for (uint32_t i = 0; i < cnt; ++i) + { + spiData[i] = (pkt.inBuffer[2*sizeof(uint16_t)*i + 2] << 8) | pkt.inBuffer[2*sizeof(uint16_t)*i + 3]; + if ((mRegistersMap->GetValue(0, LMS7param(MAC).address) & 0x0003) > 1) + mRegistersMap->SetValue(1, spiAddr[i], spiData[i]); + else + mRegistersMap->SetValue(0, spiAddr[i], spiData[i]); + } + return pkt.status == STATUS_COMPLETED_CMD ? LIBLMS7_SUCCESS : LIBLMS7_FAILURE; + /* + for(int i=0; iGetValue(0, LMS7param(MAC).address) & 0x0003) > 1) + mRegistersMap->SetValue(1, spiAddr[i], spiData[i]); + else + mRegistersMap->SetValue(0, spiAddr[i], spiData[i]); + } + return LIBLMS7_SUCCESS;*/ +} + +/** @brief Performs registers test by writing known data and confirming readback data + @return 0-registers test passed, other-failure +*/ +liblms7_status LMS7002M::RegistersTest() +{ + char chex[16]; + if (controlPort == NULL) + return LIBLMS7_NO_CONNECTION_MANAGER; + if (controlPort->IsOpen() == false) + return LIBLMS7_NOT_CONNECTED; + + liblms7_status status; + uint8_t ch = (uint8_t)Get_SPI_Reg_bits(LMS7param(MAC)); + + //backup both channel data for restoration after test + vector ch1Addresses; + for (uint8_t i = 0; i < MEMORY_SECTIONS_COUNT; ++i) + for (uint16_t addr = MemorySectionAddresses[i][0]; addr <= MemorySectionAddresses[i][1]; ++addr) + ch1Addresses.push_back(addr); + vector ch1Data; + ch1Data.resize(ch1Addresses.size(), 0); + + //backup A channel + Modify_SPI_Reg_bits(LMS7param(MAC), 1); + status = SPI_read_batch(&ch1Addresses[0], &ch1Data[0], ch1Addresses.size()); + if (status != LIBLMS7_SUCCESS) + return status; + + vector ch2Addresses; + for (uint8_t i = 0; i < MEMORY_SECTIONS_COUNT; ++i) + for (uint16_t addr = MemorySectionAddresses[i][0]; addr <= MemorySectionAddresses[i][1]; ++addr) + if (addr >= 0x0100) + ch2Addresses.push_back(addr); + vector ch2Data; + ch2Data.resize(ch2Addresses.size(), 0); + + Modify_SPI_Reg_bits(LMS7param(MAC), 2); + status = SPI_read_batch(&ch2Addresses[0], &ch2Data[0], ch2Addresses.size()); + if (status != LIBLMS7_SUCCESS) + return status; + + //test registers + ResetChip(); + Modify_SPI_Reg_bits(LMS7param(MIMO_SISO), 0); + Modify_SPI_Reg_bits(LMS7param(PD_RX_AFE2), 0); + Modify_SPI_Reg_bits(LMS7param(PD_TX_AFE2), 0); + Modify_SPI_Reg_bits(LMS7param(MAC), 1); + + stringstream ss; + + //check single channel memory sections + vector modulesToCheck = { AFE, BIAS, XBUF, CGEN, LDO, BIST, CDS, TRF, TBB, RFE, RBB, SX, + TxTSP, TxNCO, TxGFIR1, TxGFIR2, TxGFIR3a, TxGFIR3b, TxGFIR3c, + RxTSP, RxNCO, RxGFIR1, RxGFIR2, RxGFIR3a, RxGFIR3b, RxGFIR3c, LimeLight }; + const char* moduleNames[] = { "AFE", "BIAS", "XBUF", "CGEN", "LDO", "BIST", "CDS", "TRF", "TBB", "RFE", "RBB", "SX", + "TxTSP", "TxNCO", "TxGFIR1", "TxGFIR2", "TxGFIR3a", "TxGFIR3b", "TxGFIR3c", + "RxTSP", "RxNCO", "RxGFIR1", "RxGFIR2", "RxGFIR3a", "RxGFIR3b", "RxGFIR3c", "LimeLight" }; + + const uint16_t patterns[] = { 0xAAAA, 0x5555 }; + const uint8_t patternsCount = 2; + + bool allTestSuccess = true; + + for (unsigned i = 0; i < modulesToCheck.size(); ++i) + { + bool moduleTestsSuccess = true; + uint16_t startAddr = MemorySectionAddresses[modulesToCheck[i]][0]; + uint16_t endAddr = MemorySectionAddresses[modulesToCheck[i]][1]; + uint8_t channelCount = startAddr >= 0x0100 ? 2 : 1; + for (int cc = 1; cc <= channelCount; ++cc) + { + Modify_SPI_Reg_bits(LMS7param(MAC), cc); + sprintf(chex, "0x%04X", startAddr); + ss << moduleNames[i] << " [" << chex << ":"; + sprintf(chex, "0x%04X", endAddr); + ss << chex << "]"; + if (startAddr >= 0x0100) + ss << " Ch." << (cc == 1 ? "A" : "B"); + ss << endl; + for (uint8_t p = 0; p < patternsCount; ++p) + moduleTestsSuccess &= RegistersTestInterval(startAddr, endAddr, patterns[p], ss) == LIBLMS7_SUCCESS; + } + allTestSuccess &= moduleTestsSuccess; + } + + //restore register values + Modify_SPI_Reg_bits(LMS7param(MAC), 1); + SPI_write_batch(&ch1Addresses[0], &ch1Data[0], ch1Addresses.size()); + Modify_SPI_Reg_bits(LMS7param(MAC), 2); + SPI_write_batch(&ch2Addresses[0], &ch2Data[0], ch2Addresses.size()); + Modify_SPI_Reg_bits(LMS7param(MAC), ch); + + fstream fout; + fout.open("registersTest.txt", ios::out); + fout << ss.str() << endl; + fout.close(); + + return allTestSuccess ? LIBLMS7_SUCCESS : LIBLMS7_FAILURE; +} + +/** @brief Performs registers test for given address interval by writing given pattern data + @param startAddr first register address + @param endAddr last reigster address + @param pattern data to be written into registers + @return 0-register test passed, other-failure +*/ +liblms7_status LMS7002M::RegistersTestInterval(uint16_t startAddr, uint16_t endAddr, uint16_t pattern, stringstream &ss) +{ + vector addrToWrite; + vector dataToWrite; + vector dataReceived; + vector dataMasks; + + for (uint16_t addr = startAddr; addr <= endAddr; ++addr) + { + addrToWrite.push_back(addr); + } + dataMasks.resize(addrToWrite.size(), 0xFFFF); + for (uint16_t j = 0; j < sizeof(readOnlyRegisters)/sizeof(uint16_t); ++j) + for (uint16_t k = 0; k < addrToWrite.size(); ++k) + if (readOnlyRegisters[j] == addrToWrite[k]) + { + dataMasks[k] = readOnlyRegistersMasks[j]; + break; + } + + dataToWrite.clear(); + dataReceived.clear(); + for (uint16_t j = 0; j < addrToWrite.size(); ++j) + { + if (addrToWrite[j] == 0x00A6) + dataToWrite.push_back(0x1 | pattern & ~0x2); + else if (addrToWrite[j] == 0x0084) + dataToWrite.push_back(pattern & ~0x19); + else + dataToWrite.push_back(pattern & dataMasks[j]); + } + dataReceived.resize(addrToWrite.size(), 0); + liblms7_status status; + status = SPI_write_batch(&addrToWrite[0], &dataToWrite[0], addrToWrite.size()); + if (status != LIBLMS7_SUCCESS) + return status; + status = SPI_read_batch(&addrToWrite[0], &dataReceived[0], addrToWrite.size()); + if (status != LIBLMS7_SUCCESS) + return status; + bool registersMatch = true; + char ctemp[16]; + for (uint16_t j = 0; j < dataToWrite.size(); ++j) + { + if (dataToWrite[j] != (dataReceived[j] & dataMasks[j])) + { + registersMatch = false; + sprintf(ctemp, "0x%04X", addrToWrite[j]); + ss << "\t" << ctemp << "(wr/rd): "; + sprintf(ctemp, "0x%04X", dataToWrite[j]); + ss << ctemp << "/"; + sprintf(ctemp, "0x%04X", dataReceived[j]); + ss << ctemp << endl; + } + } + if (registersMatch) + { + sprintf(ctemp, "0x%04X", pattern); + ss << "\tRegisters OK (" << ctemp << ")\n"; + } + return registersMatch ? LIBLMS7_SUCCESS : LIBLMS7_FAILURE; +} + +/** @brief Parameters setup instructions for Tx calibration + @return 0-success, other-failure +*/ +liblms7_status LMS7002M::CalibrateTxSetup(float_type bandwidth_MHz) +{ + //Stage 2 + uint8_t ch = (uint8_t)Get_SPI_Reg_bits(LMS7param(MAC)); + uint8_t sel_band1_trf = (uint8_t)Get_SPI_Reg_bits(LMS7param(SEL_BAND1_TRF)); + uint8_t sel_band2_trf = (uint8_t)Get_SPI_Reg_bits(LMS7param(SEL_BAND2_TRF)); + + //rfe + //reset RFE to defaults + SetDefaults(RFE); + if (sel_band1_trf == 1) + Modify_SPI_Reg_bits(LMS7param(SEL_PATH_RFE), 3); //SEL_PATH_RFE 3 + else if (sel_band2_trf == 1) + Modify_SPI_Reg_bits(LMS7param(SEL_PATH_RFE), 2); + else + return LIBLMS7_BAND_NOT_SELECTED; + + if (ch == 2) + Modify_SPI_Reg_bits(LMS7param(EN_NEXTRX_RFE), 1); // EN_NEXTTX_RFE 1 + + Modify_SPI_Reg_bits(LMS7param(G_RXLOOPB_RFE), 8); //G_RXLOOPB_RFE 8 + Modify_SPI_Reg_bits(0x010C, 4, 3, 0); //PD_MXLOBUF_RFE 0, PD_QGEN_RFE 0 + Modify_SPI_Reg_bits(LMS7param(CCOMP_TIA_RFE), 10); //CCOMP_TIA_RFE 10 + Modify_SPI_Reg_bits(LMS7param(CFB_TIA_RFE), 2600); //CFB_TIA_RFE 2600 + Modify_SPI_Reg_bits(LMS7param(ICT_LODC_RFE), 31); //ICT_LODC_RFE 31 + Modify_SPI_Reg_bits(LMS7param(PD_LNA_RFE), 1); + + //RBB + //reset RBB to defaults + SetDefaults(RBB); + Modify_SPI_Reg_bits(LMS7param(PD_LPFL_RBB), 0); //PD_LPFL_RBB 0 + Modify_SPI_Reg_bits(LMS7param(RCC_CTL_LPFL_RBB), 0); //RCC_CTL_LPFL_RBB 0 + Modify_SPI_Reg_bits(LMS7param(C_CTL_LPFL_RBB), 1500); //C_CTL_LPFL_RBB 1500 + Modify_SPI_Reg_bits(LMS7param(G_PGA_RBB), 22); //G_PGA_RBB 22 + + //TRF + //reset TRF to defaults + //SetDefaults(TRF); + Modify_SPI_Reg_bits(LMS7param(L_LOOPB_TXPAD_TRF), 0); //L_LOOPB_TXPAD_TRF 0 + Modify_SPI_Reg_bits(LMS7param(EN_LOOPB_TXPAD_TRF), 1); //EN_LOOPB_TXPAD_TRF 1 + Modify_SPI_Reg_bits(LMS7param(EN_G_TRF), 0); //EN_G_TRF 0 + if (ch == 2) + Modify_SPI_Reg_bits(LMS7param(EN_NEXTTX_TRF), 1); //EN_NEXTTX_TRF 1 + Modify_SPI_Reg_bits(LMS7param(LOSS_LIN_TXPAD_TRF), 0); //LOSS_LIN_TXPAD_TRF 5 + Modify_SPI_Reg_bits(LMS7param(LOSS_MAIN_TXPAD_TRF), 0); //LOSS_MAIN_TXPAD_TRF 5 + + //TBB + //reset TBB to defaults + /*SetDefaults(TBB); + Modify_SPI_Reg_bits(LMS7param(CG_IAMP_TBB), 9); //CG_IAMP_TBB 9 + Modify_SPI_Reg_bits(LMS7param(ICT_IAMP_FRP_TBB), 1); //ICT_IAMP_FRP_TBB 1 + Modify_SPI_Reg_bits(LMS7param(ICT_IAMP_GG_FRP_TBB), 6); //ICT_IAMP_GG_FRP_TBB 6 + Modify_SPI_Reg_bits(LMS7param(RCAL_LPFH_TBB), 125); //RCAL_LPFH_TBB 0 + */ + //AFE + //reset AFE to defaults + uint8_t isel_dac_afe =(uint8_t) Get_SPI_Reg_bits(LMS7param(ISEL_DAC_AFE)); + SetDefaults(AFE); + Modify_SPI_Reg_bits(LMS7param(PD_RX_AFE2), 0); //PD_RX_AFE2 0 + Modify_SPI_Reg_bits(LMS7param(ISEL_DAC_AFE), isel_dac_afe); + + if (ch == 2) + Modify_SPI_Reg_bits(LMS7param(PD_TX_AFE2), 0); + //BIAS + uint16_t backup = Get_SPI_Reg_bits(LMS7param(RP_CALIB_BIAS)); + SetDefaults(BIAS); + Modify_SPI_Reg_bits(LMS7param(RP_CALIB_BIAS), backup); //RP_CALIB_BIAS + + //XBUF + Modify_SPI_Reg_bits(0x0085, 2, 0, 1); //PD_XBUF_RX 0, PD_XBUF_TX 0, EN_G_XBUF 1 + + //CGEN + //reset CGEN to defaults + SetDefaults(CGEN); + //power up VCO + Modify_SPI_Reg_bits(LMS7param(PD_VCO_CGEN), 0); + + if (SetFrequencyCGEN(122.88) != LIBLMS7_SUCCESS) + return LIBLMS7_FAILURE; + if (TuneVCO(VCO_CGEN) != LIBLMS7_SUCCESS) + return LIBLMS7_FAILURE; + + //SXR + Modify_SPI_Reg_bits(LMS7param(MAC), 1); + SetDefaults(SX); + float_type SXTfreqMHz = GetFrequencySX_MHz(Tx, mRefClkSXT_MHz); + + float_type SXRfreqMHz = SXTfreqMHz - bandwidth_MHz / 4 - 1; + if (SetFrequencySX(Rx, SXRfreqMHz, mRefClkSXR_MHz) != LIBLMS7_SUCCESS) + return LIBLMS7_FAILURE; + if (TuneVCO(VCO_SXR) != LIBLMS7_SUCCESS) + return LIBLMS7_FAILURE; + + //SXT + Modify_SPI_Reg_bits(LMS7param(MAC), 2); + Modify_SPI_Reg_bits(LMS7param(PD_LOCH_T2RBUF), 1); //PD_LOCH_T2RBUF 1 + if (SetFrequencySX(Tx, SXTfreqMHz, mRefClkSXT_MHz) != LIBLMS7_SUCCESS) + return LIBLMS7_FAILURE; + if (TuneVCO(VCO_SXT) != LIBLMS7_SUCCESS) + return LIBLMS7_FAILURE; + Modify_SPI_Reg_bits(LMS7param(MAC), ch); + + //TXTSP + SetDefaults(TxTSP); + Modify_SPI_Reg_bits(0x0200, 3, 2, 0x3); //TSGMODE 1, INSEL 1 + Modify_SPI_Reg_bits(0x0208, 6, 4, 0x7); //GFIR3_BYP 1, GFIR2_BYP 1, GFIR1_BYP 1 + LoadDC_REG_IQ(Tx, (int16_t)0x7FFF, (int16_t)0x8000); + Modify_SPI_Reg_bits(LMS7param(MAC), ch); + Modify_SPI_Reg_bits(0x0440, 4, 0, 0); //TX SEL[3:0] = 0 & MODE = 0 + + float_type offset = 0.2; + if (bandwidth_MHz == 8) + { + //SXR + Modify_SPI_Reg_bits(LMS7param(MAC), 1); + SetDefaults(SX); + float_type SXTfreqMHz = GetFrequencySX_MHz(Tx, mRefClkSXT_MHz); + + float_type sxrFreq = SXTfreqMHz - bandwidth_MHz / 4 - 1 - offset; + if (SetFrequencySX(Rx, sxrFreq, mRefClkSXR_MHz) != LIBLMS7_SUCCESS) + return LIBLMS7_FAILURE; + SetNCOFrequency(Tx, 0, bandwidth_MHz / 4 + offset); + } + else + SetNCOFrequency(Tx, 0, bandwidth_MHz / 4); + + //RXTSP + SetDefaults(RxTSP); + Modify_SPI_Reg_bits(LMS7param(AGC_MODE_RXTSP), 1); //AGC_MODE 1 + Modify_SPI_Reg_bits(0x040C, 7, 0, 0xBF); + Modify_SPI_Reg_bits(LMS7param(CAPSEL), 0); + Modify_SPI_Reg_bits(LMS7param(HBD_OVR_RXTSP), 0); //Decimation HBD ratio + Modify_SPI_Reg_bits(LMS7param(AGC_AVG_RXTSP), 0x7); //agc_avg iq corr + + return LIBLMS7_SUCCESS; +} + +/** @brief Flips the CAPTURE bit and returns digital RSSI value +*/ +uint32_t LMS7002M::GetRSSI() +{ + Modify_SPI_Reg_bits(LMS7param(CAPTURE), 0); + Modify_SPI_Reg_bits(LMS7param(CAPTURE), 1); + return (Get_SPI_Reg_bits(0x040F, 15, 0) << 2) | Get_SPI_Reg_bits(0x040E, 1, 0); +} + +/** @brief Sets Rx Dc offsets by converting two's complementary numbers to sign and magnitude +*/ +void LMS7002M::SetRxDCOFF(int8_t offsetI, int8_t offsetQ) +{ + uint16_t valToSend = 0; + if (offsetI < 0) + valToSend |= 0x40; + valToSend |= labs(offsetI); + valToSend = valToSend << 7; + if (offsetQ < 0) + valToSend |= 0x40; + valToSend |= labs(offsetQ); + SPI_write(0x010E, valToSend); +} + +/** @brief Calibrates Transmitter. DC correction, IQ gains, IQ phase correction + @return 0-success, other-failure +*/ +liblms7_status LMS7002M::CalibrateTx(float_type bandwidth_MHz) +{ + liblms7_status status; + Log("Tx calibration started", LOG_INFO); + BackupAllRegisters(); + + int16_t iqcorr = 0; + uint16_t gcorrq = 0; + uint16_t gcorri = 0; + uint16_t dccorri; + uint16_t dccorrq; + int16_t corrI = 0; + int16_t corrQ = 0; + uint32_t minRSSI_i; + uint32_t minRSSI_q; + uint32_t minRSSI_iq; + int16_t i; + int16_t offsetI = 0; + int16_t offsetQ = 0; + + const short firCoefs[] = + { + -2531, + -517, + 2708, + 188, + -3059, + 216, + 3569, + -770, + -4199, + 1541, + 4886, + -2577, + -5552, + 3909, + 6108, + -5537, + -6457, + 7440, + 6507, + -9566, + -6174, + 11845, + 5391, + -14179, + -4110, + 16457, + 2310, + -18561, + 0, + 20369, + -2780, + -21752, + 5963, + 22610, + -9456, + -22859, + 13127, + 22444, + -16854, + -21319, + 20489, + 19492, + -23883, + -17002, + 26881, + 13902, + -29372, + -10313, + 31226, + 6345, + -32380, + -2141, + 32767, + -2141, + -32380, + 6345, + 31226, + -10313, + -29372, + 13902, + 26881, + -17002, + -23883, + 19492, + 20489, + -21319, + -16854, + 22444, + 13127, + -22859, + -9456, + 22610, + 5963, + -21752, + -2780, + 20369, + 0, + -18561, + 2310, + 16457, + -4110, + -14179, + 5391, + 11845, + -6174, + -9566, + 6507, + 7440, + -6457, + -5537, + 6108, + 3909, + -5552, + -2577, + 4886, + 1541, + -4199, + -770, + 3569, + 216, + -3059, + 188, + 2708, + -517, + -2531 + }; + + uint8_t ch = (uint8_t)Get_SPI_Reg_bits(LMS7param(MAC)); + //Stage 1 + uint8_t sel_band1_trf = (uint8_t)Get_SPI_Reg_bits(LMS7param(SEL_BAND1_TRF)); + uint8_t sel_band2_trf = (uint8_t)Get_SPI_Reg_bits(LMS7param(SEL_BAND2_TRF)); + Log("Setup stage", LOG_INFO); + status = CalibrateTxSetup(bandwidth_MHz); + if (status != LIBLMS7_SUCCESS) + goto TxCalibrationEnd; //go to ending stage to restore registers + + //Stage 3 + //Calibrate Rx DC + Log("Rx DC calibration", LOG_INFO); + { + uint16_t requiredRegs[] = { 0x0400, 0x040A, 0x010D, 0x040C }; + uint16_t requiredMask[] = { 0x6000, 0x3007, 0x0040, 0x00FF }; //CAPSEL, AGC_MODE, AGC_AVG, EN_DCOFF, Bypasses + uint16_t requiredValue[] = { 0x0000, 0x1007, 0x0040, 0x00BD }; + + Modify_SPI_Reg_mask(requiredRegs, requiredMask, requiredValue, 0, 3); + } + + for (i = 0; i<6; ++i) + { + FindMinRSSI(LMS7param(DCOFFI_RFE), offsetI, &offsetI, 3, 2, 32 >> i); + FindMinRSSI(LMS7param(DCOFFQ_RFE), offsetQ, &offsetQ, 3, 2, 32 >> i); + } + SetRxDCOFF((int8_t)offsetI, (int8_t)offsetQ); + Modify_SPI_Reg_bits(LMS7param(DC_BYP_RXTSP), 0); // DC_BYP 0 + + sel_band1_trf = (uint8_t)Get_SPI_Reg_bits(LMS7param(SEL_BAND1_TRF)); + sel_band2_trf = (uint8_t)Get_SPI_Reg_bits(LMS7param(SEL_BAND2_TRF)); + //B + Modify_SPI_Reg_bits(0x0100, 0, 0, 1); //EN_G_TRF 1 + if (sel_band1_trf == 1) + { + Modify_SPI_Reg_bits(LMS7param(PD_RLOOPB_1_RFE), 0); //PD_RLOOPB_1_RFE 0 + Modify_SPI_Reg_bits(LMS7param(EN_INSHSW_LB1_RFE), 0); //EN_INSHSW_LB1 0 + } + if (sel_band2_trf == 1) + { + Modify_SPI_Reg_bits(LMS7param(PD_RLOOPB_2_RFE), 0); //PD_RLOOPB_2_RFE 0 + Modify_SPI_Reg_bits(LMS7param(EN_INSHSW_LB2_RFE), 0); // EN_INSHSW_LB2 0 + } + FixRXSaturation(); + + Modify_SPI_Reg_bits(LMS7param(GFIR3_BYP_RXTSP), 0); //GFIR3_BYP 0 + Modify_SPI_Reg_bits(LMS7param(HBD_OVR_RXTSP), 2); + Modify_SPI_Reg_bits(LMS7param(GFIR3_L_RXTSP), 7); + Modify_SPI_Reg_bits(LMS7param(GFIR3_N_RXTSP), 7); + + SetGFIRCoefficients(Rx, 2, firCoefs, sizeof(firCoefs) / sizeof(int16_t)); + + Log("IQ correction stage", LOG_INFO); + Modify_SPI_Reg_bits(LMS7param(GCORRI_TXTSP), 2047); + Modify_SPI_Reg_bits(LMS7param(GCORRQ_TXTSP), 2047); + + Modify_SPI_Reg_bits(LMS7param(IQCORR_TXTSP), 0); + + Log("I gain", LOG_INFO); + minRSSI_i = FindMinRSSI_Gain(LMS7param(GCORRI_TXTSP), &gcorri); + + Modify_SPI_Reg_bits(LMS7param(GCORRI_TXTSP), 2047); + Modify_SPI_Reg_bits(LMS7param(GCORRQ_TXTSP), 2047); + + Log("Q gain", LOG_INFO); + minRSSI_q = FindMinRSSI_Gain(LMS7param(GCORRQ_TXTSP), &gcorrq); + + if (minRSSI_i < minRSSI_q) + gcorrq = 2047; + else + gcorri = 2047; + + Modify_SPI_Reg_bits(LMS7param(GCORRI_TXTSP), gcorri); + Modify_SPI_Reg_bits(LMS7param(GCORRQ_TXTSP), gcorrq); + + Log("Phase", LOG_INFO); + iqcorr = 0; + for (uint8_t i = 0; i<9; ++i) + minRSSI_iq = FindMinRSSI(LMS7param(IQCORR_TXTSP), iqcorr, &iqcorr, 3, 1, 256 >> i); + + Modify_SPI_Reg_bits(LMS7param(GCORRI_TXTSP), gcorri); + Modify_SPI_Reg_bits(LMS7param(GCORRQ_TXTSP), gcorrq); + Modify_SPI_Reg_bits(LMS7param(IQCORR_TXTSP), iqcorr); + + Modify_SPI_Reg_bits(LMS7param(MAC), 1); + status = SetFrequencySX(Rx, GetFrequencySX_MHz(Tx, mRefClkSXT_MHz)-1, mRefClkSXR_MHz); + if (status != LIBLMS7_SUCCESS) + goto TxCalibrationEnd; //go to ending stage to restore registers + + //C + Modify_SPI_Reg_bits(LMS7param(MAC), ch); + Modify_SPI_Reg_bits(LMS7param(AGC_MODE_RXTSP), 1); + Modify_SPI_Reg_bits(LMS7param(CAPSEL), 0); + + Log("TX LO calibration", LOG_INFO); + + //Calibrate Tx DC + for (uint8_t i = 0; i<7; ++i) + { + FindMinRSSI(LMS7param(DCCORRI_TXTSP), corrI, &corrI, 3, 1, 64 >> i); + FindMinRSSI(LMS7param(DCCORRQ_TXTSP), corrQ, &corrQ, 3, 1, 64 >> i); + } + + dccorri = Get_SPI_Reg_bits(LMS7param(DCCORRI_TXTSP)); + dccorrq = Get_SPI_Reg_bits(LMS7param(DCCORRQ_TXTSP)); + + // Stage 4 +TxCalibrationEnd: + Log("Restoring registers state", LOG_INFO); + Modify_SPI_Reg_bits(LMS7param(MAC), ch); + RestoreAllRegisters(); + if (status != LIBLMS7_SUCCESS) + { + Log("Tx calibration failed", LOG_WARNING); + return status; + } + + Modify_SPI_Reg_bits(LMS7param(MAC), ch); + Modify_SPI_Reg_bits(LMS7param(DCCORRI_TXTSP), dccorri); + Modify_SPI_Reg_bits(LMS7param(DCCORRQ_TXTSP), dccorrq); + Modify_SPI_Reg_bits(LMS7param(GCORRI_TXTSP), gcorri); + Modify_SPI_Reg_bits(LMS7param(GCORRQ_TXTSP), gcorrq); + Modify_SPI_Reg_bits(LMS7param(IQCORR_TXTSP), iqcorr); + + Modify_SPI_Reg_bits(LMS7param(DC_BYP_TXTSP), 0); //DC_BYP + Modify_SPI_Reg_bits(0x0208, 1, 0, 0); //GC_BYP PH_BYP + Log("Tx calibration finished", LOG_INFO); + return LIBLMS7_SUCCESS; +} + +/** @brief Performs Rx DC offsets calibration +*/ +void LMS7002M::CalibrateRxDC_RSSI() +{ + int16_t i; + int16_t offsetI = 0; + int16_t offsetQ = 0; + uint16_t requiredRegs[] = { 0x0400, 0x040A, 0x010D, 0x040C }; + uint16_t requiredMask[] = { 0x6000, 0x3007, 0x0040, 0x00FF }; //CAPSEL, AGC_MODE, AGC_AVG, EN_DCOFF, Bypasses + uint16_t requiredValue[] = { 0x0000, 0x1007, 0x0040, 0x00BD }; + + Modify_SPI_Reg_mask(requiredRegs, requiredMask, requiredValue, 0, 3); + for (i = 0; i<6; ++i) + { + FindMinRSSI(LMS7param(DCOFFI_RFE), offsetI, &offsetI, 3, 2, 32 >> i); + FindMinRSSI(LMS7param(DCOFFQ_RFE), offsetQ, &offsetQ, 3, 2, 32 >> i); + } + Modify_SPI_Reg_bits(LMS7param(EN_DCOFF_RXFE_RFE), 1); + SetRxDCOFF((int8_t)offsetI, (int8_t)offsetQ); + Modify_SPI_Reg_bits(LMS7param(DC_BYP_RXTSP), 0); // DC_BYP 0 +} + +/** @brief Tries to detect and fix gains if Rx is saturated + @return 0-success, other-failure +*/ +liblms7_status LMS7002M::FixRXSaturation() +{ + uint8_t g_rxloopb = 0; + Modify_SPI_Reg_bits(LMS7param(G_RXLOOPB_RFE), g_rxloopb); + Modify_SPI_Reg_bits(LMS7param(L_LOOPB_TXPAD_TRF), 3); + + int8_t lLoopb = 3; + const uint32_t rssi_saturation_level = 0xD000; + while (g_rxloopb < 15) + { + g_rxloopb += 1; + Modify_SPI_Reg_bits(LMS7param(G_RXLOOPB_RFE), g_rxloopb); + Modify_SPI_Reg_bits(LMS7param(L_LOOPB_TXPAD_TRF), 3); + if (GetRSSI() < rssi_saturation_level) + { + for (lLoopb = 3; lLoopb >= 0; --lLoopb) + { + Modify_SPI_Reg_bits(LMS7param(L_LOOPB_TXPAD_TRF), lLoopb); + if (GetRSSI() > rssi_saturation_level) + { + ++lLoopb; + Modify_SPI_Reg_bits(LMS7param(L_LOOPB_TXPAD_TRF), lLoopb); + goto finished; + } + } + } + else + { + g_rxloopb -= 1; + Modify_SPI_Reg_bits(LMS7param(G_RXLOOPB_RFE), g_rxloopb); + break; + } + } +finished: + return GetRSSI() < rssi_saturation_level ? LIBLMS7_SUCCESS : LIBLMS7_FAILURE; +} + +uint32_t LMS7002M::FindMinRSSI(const LMS7Parameter ¶m, const int16_t startValue, int16_t *result, const uint8_t scanWidth, const uint8_t twoCompl, int8_t stepMult) +{ + return FindMinRSSI(param.address, param.msb, param.lsb, startValue, result, scanWidth, twoCompl, stepMult); +} + +/** @brief Searches for minimal RSSI value while changing given address bits +@param addr address of parameter being changed +@param msb most significant bit index +@param lsb least significant bit index +@param startValue initial value where to start search +@param result found minimal parameter value will be set here +@param twoCompl varying parameter value is treated as two's complement +@return found minimal RSSI value +*/ +uint32_t LMS7002M::FindMinRSSI(const uint16_t addr, const uint8_t msb, const uint8_t lsb, const int16_t startValue, int16_t *result, const uint8_t scanWidth, const uint8_t twoCompl, int8_t stepMult) +{ + if (scanWidth < 1) + return ~0; + int minI; + int min = startValue; + int globMin = 0; + uint32_t minRSSI = ~0; + unsigned int *rssiField = new unsigned int[scanWidth]; + int minRSSIindex; + int i; + int maxVal; + int minVal = 0; + if (twoCompl) + { + maxVal = (~(~0x0 << (msb - lsb + 1))) / 2; + minVal = -(~(~0x0 << (msb - lsb + 1))) / 2 - 1; + } + else + maxVal = (~(~0x0 << (msb - lsb + 1))); + + Modify_SPI_Reg_bits(addr, msb, lsb, startValue); + + Modify_SPI_Reg_bits(LMS7param(AGC_MODE_RXTSP), 1); + Modify_SPI_Reg_bits(LMS7param(CAPSEL), 0); + + minRSSIindex = 0; + for (i = 0; i maxVal) + currentValue = maxVal; + if (twoCompl == 2) + { + uint16_t valToSend = 0; + if (currentValue < 0) + valToSend |= 0x40; + valToSend |= labs(currentValue); + Modify_SPI_Reg_bits(addr, msb, lsb, valToSend); + } + else + Modify_SPI_Reg_bits(addr, msb, lsb, currentValue); + + rssiField[i] = GetRSSI(); + } + minI = min; + minRSSIindex = 0; + for (i = 0; i maxVal) + minI = maxVal; + else if (minI < minVal) + minI = minVal; + globMin = minI; + } + min = minI; + + Modify_SPI_Reg_bits(addr, msb, lsb, min); + + *result = min; + return minRSSI; +} + +/** @brief Sets given module registers to default values + @return 0-success, other-failure +*/ +liblms7_status LMS7002M::SetDefaults(MemorySection module) +{ + liblms7_status status = LIBLMS7_SUCCESS; + vector addrs; + vector values; + for(uint32_t address = MemorySectionAddresses[module][0]; address <= MemorySectionAddresses[module][1]; ++address) + { + addrs.push_back(address); + values.push_back(mRegistersMap->GetDefaultValue(address)); + } + status = SPI_write_batch(&addrs[0], &values[0], addrs.size()); + return status; +} + +/** @brief Parameters setup instructions for Rx calibration + @param bandwidth_MHz filter bandwidth in MHz + @return 0-success, other-failure +*/ +liblms7_status LMS7002M::CalibrateRxSetup(float_type bandwidth_MHz) +{ + uint8_t ch = (uint8_t)Get_SPI_Reg_bits(LMS7param(MAC)); + + //rfe + if (ch == 2) + Modify_SPI_Reg_bits(LMS7param(EN_NEXTTX_TRF), 1); // EN_NEXTTX_TRF 0 + + Modify_SPI_Reg_bits(LMS7param(G_RXLOOPB_RFE), 15); //G_RXLOOPB_RFE 15 + Modify_SPI_Reg_bits(0x010C, 4, 3, 0); //PD_MXLOBUF_RFE 0, PD_QGEN_RFE 0 + Modify_SPI_Reg_bits(0x010C, 1, 1, 0); //PD_TIA 0 + Modify_SPI_Reg_bits(0x010C, 7, 7, 1); //PD_LNA 1 + + Modify_SPI_Reg_bits(0x0110, 4, 0, 31); //ICT_LO_RFE 31 + Modify_SPI_Reg_bits(0x010D, 4, 1, 0xFF); // all short switches are enabled + + //RBB + Modify_SPI_Reg_bits(0x0115, 15, 14, 0); //Loopback switches disable + Modify_SPI_Reg_bits(0x0119, 15, 15, 0); //OSW_PGA 0 + + //TRF + //reset TRF to defaults + SetDefaults(TRF); + Modify_SPI_Reg_bits(LMS7param(L_LOOPB_TXPAD_TRF), 0); //L_LOOPB_TXPAD_TRF 0 + Modify_SPI_Reg_bits(LMS7param(EN_LOOPB_TXPAD_TRF), 1); //EN_LOOPB_TXPAD_TRF 1 + Modify_SPI_Reg_bits(LMS7param(EN_G_TRF), 0); //EN_G_TRF 0 + if (ch == 2) + Modify_SPI_Reg_bits(LMS7param(EN_NEXTTX_TRF), 1); //EN_NEXTTX_TRF 1 + Modify_SPI_Reg_bits(LMS7param(LOSS_LIN_TXPAD_TRF), 0); //LOSS_LIN_TXPAD_TRF 5 + Modify_SPI_Reg_bits(LMS7param(LOSS_MAIN_TXPAD_TRF), 0); //LOSS_MAIN_TXPAD_TRF 5 + + //TBB + //reset TBB to defaults + SetDefaults(TBB); + Modify_SPI_Reg_bits(LMS7param(CG_IAMP_TBB), 9); //CG_IAMP_TBB 9 + Modify_SPI_Reg_bits(LMS7param(ICT_IAMP_FRP_TBB), 1); //ICT_IAMP_FRP_TBB 1 + Modify_SPI_Reg_bits(LMS7param(ICT_IAMP_GG_FRP_TBB), 6); //ICT_IAMP_GG_FRP_TBB 6 + + //AFE + //reset AFE to defaults + SetDefaults(AFE); + Modify_SPI_Reg_bits(LMS7param(PD_RX_AFE2), 0); //PD_RX_AFE2 + if (ch == 2) + { + Modify_SPI_Reg_bits(LMS7param(PD_TX_AFE2), 0); //PD_TX_AFE2 + } + //BIAS + uint16_t backup = Get_SPI_Reg_bits(0x0084, 10, 6); + SetDefaults(BIAS); + Modify_SPI_Reg_bits(0x0084, 10, 6, backup); //RP_CALIB_BIAS + + //XBUF + Modify_SPI_Reg_bits(0x0085, 2, 0, 1); //PD_XBUF_RX 0, PD_XBUF_TX 0, EN_G_XBUF 1 + + //CGEN + //reset CGEN to defaults + SetDefaults(CGEN); + //power up VCO + Modify_SPI_Reg_bits(0x0086, 2, 2, 0); + + liblms7_status status = SetFrequencyCGEN(122.88); + if (status != LIBLMS7_SUCCESS) + return status; + + // //SXR + Modify_SPI_Reg_bits(LMS7param(MAC), 1); + float_type SXRfreqMHz = GetFrequencySX_MHz(Rx, mRefClkSXR_MHz); + + //SXT + Modify_SPI_Reg_bits(LMS7param(MAC), 2); + Modify_SPI_Reg_bits(LMS7param(PD_LOCH_T2RBUF), 1); //PD_LOCH_t2RBUF 1 + status = SetFrequencySX(Tx, SXRfreqMHz + bandwidth_MHz / 4, mRefClkSXT_MHz); + if ( status != LIBLMS7_SUCCESS) + return status; + Modify_SPI_Reg_bits(LMS7param(MAC), ch); + + //TXTSP + SetDefaults(TxTSP); + Modify_SPI_Reg_bits(0x0200, 3, 2, 0x3); //TSGMODE 1, INSEL 1 + //Modify_SPI_Reg_bits(0x0208, 6, 4, 0xFFFF); //GFIR3_BYP 1, GFIR2_BYP 1, GFIR1_BYP 1 + Modify_SPI_Reg_bits(0x0208, 6, 6, 1); //GFIR3_BYP 1, GFIR2_BYP 1, GFIR1_BYP 1 + Modify_SPI_Reg_bits(0x0208, 5, 5, 1); //GFIR3_BYP 1, GFIR2_BYP 1, GFIR1_BYP 1 + Modify_SPI_Reg_bits(0x0208, 4, 4, 1); //GFIR3_BYP 1, GFIR2_BYP 1, GFIR1_BYP 1 + LoadDC_REG_IQ(Tx, (int16_t)0x7FFF, (int16_t)0x8000); + SetNCOFrequency(Tx, 0, 0); + + //RXTSP + SetDefaults(RxTSP); + Modify_SPI_Reg_bits(LMS7param(AGC_MODE_RXTSP), 1); //AGC_MODE 1 + Modify_SPI_Reg_bits(0x040C, 7, 7, 0x1); //CMIX_BYP 1 + Modify_SPI_Reg_bits(0x040C, 6, 6, 0x0); //AGC_BYP 0 + Modify_SPI_Reg_bits(0x040C, 5, 5, 1); // + Modify_SPI_Reg_bits(0x040C, 4, 4, 1); // + Modify_SPI_Reg_bits(0x040C, 3, 3, 1); // + Modify_SPI_Reg_bits(0x040C, 2, 2, 1); // DC_BYP + Modify_SPI_Reg_bits(0x040C, 1, 1, 1); // + Modify_SPI_Reg_bits(0x040C, 0, 0, 1); // + + Modify_SPI_Reg_bits(LMS7param(CAPSEL), 0); + Modify_SPI_Reg_bits(LMS7param(HBD_OVR_RXTSP), 2); + Modify_SPI_Reg_bits(LMS7param(AGC_AVG_RXTSP), 0x7); //agc_avg iq corr + return LIBLMS7_SUCCESS; +} + +/** @brief Calibrates Receiver. DC offset, IQ gains, IQ phase correction + @return 0-success, other-failure +*/ +liblms7_status LMS7002M::CalibrateRx(float_type bandwidth_MHz) +{ + liblms7_status status; + uint32_t minRSSI_i; + uint32_t minRSSI_q; + int16_t iqcorr_rx = 0; + uint32_t minRSSI_iq; + int16_t dcoffi; + int16_t dcoffq; + + const int16_t firCoefs[] = + { + -2531, + -517, + 2708, + 188, + -3059, + 216, + 3569, + -770, + -4199, + 1541, + 4886, + -2577, + -5552, + 3909, + 6108, + -5537, + -6457, + 7440, + 6507, + -9566, + -6174, + 11845, + 5391, + -14179, + -4110, + 16457, + 2310, + -18561, + 0, + 20369, + -2780, + -21752, + 5963, + 22610, + -9456, + -22859, + 13127, + 22444, + -16854, + -21319, + 20489, + 19492, + -23883, + -17002, + 26881, + 13902, + -29372, + -10313, + 31226, + 6345, + -32380, + -2141, + 32767, + -2141, + -32380, + 6345, + 31226, + -10313, + -29372, + 13902, + 26881, + -17002, + -23883, + 19492, + 20489, + -21319, + -16854, + 22444, + 13127, + -22859, + -9456, + 22610, + 5963, + -21752, + -2780, + 20369, + 0, + -18561, + 2310, + 16457, + -4110, + -14179, + 5391, + 11845, + -6174, + -9566, + 6507, + 7440, + -6457, + -5537, + 6108, + 3909, + -5552, + -2577, + 4886, + 1541, + -4199, + -770, + 3569, + 216, + -3059, + 188, + 2708, + -517, + -2531 + }; + + Log("Rx calibration started", LOG_INFO); + uint8_t ch = (uint8_t)Get_SPI_Reg_bits(LMS7param(MAC)); + Log("Saving registers state", LOG_INFO); + BackupAllRegisters(); + uint8_t sel_path_rfe = (uint8_t)Get_SPI_Reg_bits(LMS7param(SEL_PATH_RFE)); + if (sel_path_rfe == 1 || sel_path_rfe == 0) + return LIBLMS7_BAD_SEL_PATH; + + Log("Setup stage", LOG_INFO); + status = CalibrateRxSetup(bandwidth_MHz); + if (status != LIBLMS7_SUCCESS) + goto RxCalibrationEndStage; + + Log("Rx DC calibration", LOG_INFO); + CalibrateRxDC_RSSI(); + dcoffi = Get_SPI_Reg_bits(LMS7param(DCOFFI_RFE)); + dcoffq = Get_SPI_Reg_bits(LMS7param(DCOFFQ_RFE)); + Modify_SPI_Reg_bits(LMS7param(EN_G_TRF), 1); + + if (sel_path_rfe == 2) + { + Modify_SPI_Reg_bits(LMS7param(PD_RLOOPB_2_RFE), 0); + Modify_SPI_Reg_bits(0x0103, 10, 10, 1); + Modify_SPI_Reg_bits(0x0103, 11, 11, 0); + Modify_SPI_Reg_bits(LMS7param(EN_INSHSW_LB2_RFE), 0); + } + if (sel_path_rfe == 3) + { + Modify_SPI_Reg_bits(LMS7param(PD_RLOOPB_1_RFE), 0); + Modify_SPI_Reg_bits(0x0103, 11, 11, 1); + Modify_SPI_Reg_bits(0x0103, 10, 10, 0); + Modify_SPI_Reg_bits(LMS7param(EN_INSHSW_LB1_RFE), 0); + } + + Modify_SPI_Reg_bits(0x040C, 7, 7, 0); //CMIX_BYP 0 + Modify_SPI_Reg_bits(0x040C, 2, 0, 0); //DC_BYP 0, GC_BYP 0, PH_BYP 0 + Modify_SPI_Reg_bits(LMS7param(CMIX_GAIN_RXTSP), 1); //CMIX_GAIN 1 +6 db + Modify_SPI_Reg_bits(0x040C, 13, 13, 1); //CMIX_SC 1 + + FixRXSaturation(); + + Modify_SPI_Reg_bits(0x040C, 5, 5, 0); //GFIR3_BYP 0 + Modify_SPI_Reg_bits(LMS7param(HBD_OVR_RXTSP), 2); + Modify_SPI_Reg_bits(LMS7param(GFIR3_L_RXTSP), 7); + Modify_SPI_Reg_bits(LMS7param(GFIR3_N_RXTSP), 7); + + SetGFIRCoefficients(Rx, 2, firCoefs, sizeof(firCoefs) / sizeof(int16_t)); + + SetNCOFrequency(Rx, 0, bandwidth_MHz / 4 + 1); + Modify_SPI_Reg_bits(LMS7param(GCORRI_RXTSP), 2047); + Modify_SPI_Reg_bits(LMS7param(GCORRQ_RXTSP), 2047); + + Log("IQ correction stage", LOG_INFO); + iqcorr_rx = 0; + for (int i = 0; i<9; ++i) + minRSSI_iq = FindMinRSSI(LMS7param(IQCORR_RXTSP), iqcorr_rx, &iqcorr_rx, 3, 1, 256 >> i); + Modify_SPI_Reg_bits(LMS7param(IQCORR_RXTSP), iqcorr_rx); + + uint16_t mingcorri; + Log("I gain", LOG_INFO); + minRSSI_i = FindMinRSSI_Gain(LMS7param(GCORRI_RXTSP), &mingcorri); + + Modify_SPI_Reg_bits(LMS7param(GCORRI_RXTSP), 2047); + Modify_SPI_Reg_bits(LMS7param(GCORRQ_RXTSP), 2047); + + Log("Q gain", LOG_INFO); + uint16_t mingcorrq; + minRSSI_q = FindMinRSSI_Gain(LMS7param(GCORRQ_RXTSP), &mingcorrq); + + if (minRSSI_i < minRSSI_q) + mingcorrq = 2047; + else + mingcorri = 2047; + + Modify_SPI_Reg_bits(LMS7param(GCORRI_RXTSP), mingcorri); + Modify_SPI_Reg_bits(LMS7param(GCORRQ_RXTSP), mingcorrq); + + Log("Phase", LOG_INFO); + for (int i = 0; i<9; ++i) + minRSSI_iq = FindMinRSSI(LMS7param(IQCORR_RXTSP), iqcorr_rx, &iqcorr_rx, 3, 1, 256 >> i); + +RxCalibrationEndStage: + Log("Restoring registers state", LOG_INFO); + RestoreAllRegisters(); + if (status != LIBLMS7_SUCCESS) + { + Log("Rx calibration failed", LOG_WARNING); + return status; + } + + Modify_SPI_Reg_bits(LMS7param(MAC), ch); + SetRxDCOFF((int8_t)dcoffi, (int8_t)dcoffq); + Modify_SPI_Reg_bits(LMS7param(EN_DCOFF_RXFE_RFE), 1); + Modify_SPI_Reg_bits(LMS7param(GCORRI_RXTSP), mingcorri); + Modify_SPI_Reg_bits(LMS7param(GCORRQ_RXTSP), mingcorrq); + Modify_SPI_Reg_bits(LMS7param(IQCORR_RXTSP), iqcorr_rx); + Modify_SPI_Reg_bits(0x040C, 2, 0, 0); //DC_BYP 0, GC_BYP 0, PH_BYP 0 + Modify_SPI_Reg_bits(0x0110, 4, 0, 31); //ICT_LO_RFE 31 + Log("Rx calibration finished", LOG_INFO); + return LIBLMS7_SUCCESS; +} + +const uint16_t backupAddrs[] = { + 0x0020, 0x0021, 0x0022, 0x0023, 0x0024, 0x0025, 0x0026, 0x0027, 0x0028, + 0x0029, 0x002A, 0x002B, 0x002C, 0x002E, 0x0081, 0x0082, 0x0084, 0x0085, + 0x0086, 0x0087, 0x0088, 0x0089, 0x008A, 0x008B, 0x008C, 0x0092, 0x0093, 0x0094, + 0x0095, 0x0096, 0x0097, 0x0098, 0x0099, 0x009A, 0x009B, 0x009C, 0x009D, 0x009E, + 0x009F, 0x00A0, 0x00A1, 0x00A2, 0x00A3, 0x00A4, 0x00A5, 0x00A6, 0x00A7, 0x00A8, + 0x00A9, 0x00AA, 0x00AB, 0x00AC, 0x00AD, 0x00AE, 0x0100, 0x0101, 0x0102, 0x0103, + 0x0104, 0x0105, 0x0106, 0x0107, 0x0108, 0x0109, 0x010A, 0x010C, 0x010D, 0x010E, + 0x010F, 0x0110, 0x0111, 0x0112, 0x0113, 0x0114, 0x0115, 0x0116, 0x0117, 0x0118, + 0x0119, 0x011A, 0x011C, 0x011D, 0x011E, 0x011F, 0x0120, 0x0121, 0x0122, 0x0123, + 0x0124, 0x0200, 0x0201, 0x0202, 0x0203, 0x0204, 0x0205, 0x0206, 0x0207, 0x0208, + 0x0240, 0x0242, 0x0243, 0x0400, 0x0401, 0x0402, + 0x0403, 0x0404, 0x0405, 0x0406, 0x0407, 0x0408, 0x0409, 0x040A, 0x040B, 0x040C, + 0x0440, 0x0442, 0x0443 }; +uint16_t backupRegs[sizeof(backupAddrs) / 2]; +const uint16_t backupSXAddr[] = { 0x011C, 0x011D, 0x011E, 0x011F, 0x01200, 0x0121, 0x0122, 0x0123, 0x0124 }; +uint16_t backupRegsSXR[sizeof(backupSXAddr) / 2]; +uint16_t backupRegsSXT[sizeof(backupSXAddr) / 2]; + +/** @brief Stores chip current registers state into memory for later restoration +*/ +void LMS7002M::BackupAllRegisters() +{ + uint8_t ch = (uint8_t)Get_SPI_Reg_bits(LMS7param(MAC)); + SPI_read_batch(backupAddrs, backupRegs, sizeof(backupAddrs) / sizeof(uint16_t)); + Modify_SPI_Reg_bits(LMS7param(MAC), 1); // channel A + SPI_read_batch(backupSXAddr, backupRegsSXR, sizeof(backupRegsSXR) / sizeof(uint16_t)); + Modify_SPI_Reg_bits(LMS7param(MAC), 2); // channel B + SPI_read_batch(backupSXAddr, backupRegsSXT, sizeof(backupRegsSXR) / sizeof(uint16_t)); + Modify_SPI_Reg_bits(LMS7param(MAC), ch); +} + +/** @brief Sets chip registers to state that was stored in memory using BackupAllRegisters() +*/ +void LMS7002M::RestoreAllRegisters() +{ + uint8_t ch = (uint8_t)Get_SPI_Reg_bits(LMS7param(MAC)); + SPI_write_batch(backupAddrs, backupRegs, sizeof(backupAddrs) / sizeof(uint16_t)); + Modify_SPI_Reg_bits(LMS7param(MAC), 1); // channel A + SPI_write_batch(backupSXAddr, backupRegsSXR, sizeof(backupRegsSXR) / sizeof(uint16_t)); + Modify_SPI_Reg_bits(LMS7param(MAC), 2); // channel B + SPI_write_batch(backupSXAddr, backupRegsSXT, sizeof(backupRegsSXR) / sizeof(uint16_t)); + Modify_SPI_Reg_bits(LMS7param(MAC), ch); +} + +/** @brief Searches for minimal digital RSSI value by changing given gain parameter + @param param LMS7002M gain correction parameter + @param foundValue returns value which achieved minimal RSSI + @return minimal found RSSI value +*/ +uint32_t LMS7002M::FindMinRSSI_Gain(const LMS7Parameter ¶m, uint16_t *foundValue) +{ + uint32_t RSSI = ~0 - 2; + uint32_t prevRSSI = RSSI + 1; + uint8_t decrement = 2; + uint16_t gcorr = 2047; + while (gcorr > 1024) + { + Modify_SPI_Reg_bits(param, gcorr); + RSSI = GetRSSI(); + if (RSSI < prevRSSI) + { + prevRSSI = RSSI; + *foundValue = gcorr; + gcorr -= decrement; + decrement *= 2; + } + else + { + if (decrement == 2) + break; + gcorr -= decrement; + decrement = 2; + } + } + return prevRSSI; +} + +/** @brief Reads all chip configuration and checks if it matches with local registers copy +*/ +bool LMS7002M::IsSynced() +{ + if (controlPort->IsOpen() == false) + return false; + bool isSynced = true; + liblms7_status status; + + uint8_t ch = (uint8_t)Get_SPI_Reg_bits(LMS7param(MAC)); + + vector addrToRead = mRegistersMap->GetUsedAddresses(0); + vector dataReceived; + dataReceived.resize(addrToRead.size(), 0); + + Modify_SPI_Reg_bits(LMS7param(MAC), 1); + status = SPI_read_batch(&addrToRead[0], &dataReceived[0], addrToRead.size()); + if (status != LIBLMS7_SUCCESS) + { + isSynced = false; + goto isSyncedEnding; + } + + //mask out readonly bits + for (uint16_t j = 0; j < sizeof(readOnlyRegisters) / sizeof(uint16_t); ++j) + for (uint16_t k = 0; k < addrToRead.size(); ++k) + if (readOnlyRegisters[j] == addrToRead[k]) + { + dataReceived[k] &= readOnlyRegistersMasks[j]; + break; + } + + //check if local copy matches chip + for (uint16_t i = 0; i < addrToRead.size(); ++i) + { + if (dataReceived[i] != mRegistersMap->GetValue(0, addrToRead[i])) + { + isSynced = false; + goto isSyncedEnding; + } + } + + addrToRead.clear(); //add only B channel addresses + addrToRead = mRegistersMap->GetUsedAddresses(1); + + //mask out readonly bits + for (uint16_t j = 0; j < sizeof(readOnlyRegisters) / sizeof(uint16_t); ++j) + for (uint16_t k = 0; k < addrToRead.size(); ++k) + if (readOnlyRegisters[j] == addrToRead[k]) + { + dataReceived[k] &= readOnlyRegistersMasks[j]; + break; + } + + Modify_SPI_Reg_bits(LMS7param(MAC), 2); + status = SPI_read_batch(&addrToRead[0], &dataReceived[0], addrToRead.size()); + if (status != LIBLMS7_SUCCESS) + return false; + //check if local copy matches chip + for (uint16_t i = 0; i < addrToRead.size(); ++i) + if (dataReceived[i] != mRegistersMap->GetValue(1, addrToRead[i])) + { + isSynced = false; + break; + } + +isSyncedEnding: + Modify_SPI_Reg_bits(LMS7param(MAC), ch); //restore previously used channel + return isSynced; +} + +/** @brief Writes all registers from host to chip + +When used on Novena board, also changes gpios to match rx path and tx band selections +*/ +liblms7_status LMS7002M::UploadAll() +{ + if (controlPort == NULL) + return LIBLMS7_NO_CONNECTION_MANAGER; + if (controlPort->IsOpen() == false) + return LIBLMS7_NOT_CONNECTED; + + uint8_t ch = (uint8_t)Get_SPI_Reg_bits(LMS7param(MAC)); //remember used channel + + liblms7_status status; + + vector addrToWrite; + vector dataToWrite; + + uint16_t x0020_value = mRegistersMap->GetValue(0, 0x0020); + Modify_SPI_Reg_bits(LMS7param(MAC), 1); //select A channel + + addrToWrite = mRegistersMap->GetUsedAddresses(0); + //remove 0x0020 register from list, to not change MAC + addrToWrite.erase( find(addrToWrite.begin(), addrToWrite.end(), 0x0020) ); + for (auto address : addrToWrite) + dataToWrite.push_back(mRegistersMap->GetValue(0, address)); + + status = SPI_write_batch(&addrToWrite[0], &dataToWrite[0], addrToWrite.size()); + status = LIBLMS7_SUCCESS; + if (status != LIBLMS7_SUCCESS) + return status; + //after all channel A registers have been written, update 0x0020 register value + status = SPI_write(0x0020, x0020_value); + if (status != LIBLMS7_SUCCESS) + return status; + Modify_SPI_Reg_bits(LMS7param(MAC), 2); + if (status != LIBLMS7_SUCCESS) + return status; + + addrToWrite = mRegistersMap->GetUsedAddresses(1); + dataToWrite.clear(); + for (auto address : addrToWrite) + { + dataToWrite.push_back(mRegistersMap->GetValue(1, address)); + } + Modify_SPI_Reg_bits(LMS7param(MAC), 2); //select B channel + status = SPI_write_batch(&addrToWrite[0], &dataToWrite[0], addrToWrite.size()); + if (status != LIBLMS7_SUCCESS) + return status; + Modify_SPI_Reg_bits(LMS7param(MAC), ch); //restore last used channel + + //in case of Novena board, need to update GPIO + if(controlPort->GetInfo().device == LMS_DEV_NOVENA) + { + uint16_t regValue = SPI_read(0x0706) & 0xFFF8; + //lms_gpio2 - tx output selection: + // 0 - TX1_A and TX1_B (Band 1), + // 1 - TX2_A and TX2_B (Band 2) + regValue |= Get_SPI_Reg_bits(LMS7param(SEL_BAND2_TRF)) << 2; //gpio2 + //RX active paths + //lms_gpio0 | lms_gpio1 RX_A RX_B + // 0 0 => no active path + // 1 0 => LNAW_A LNAW_B + // 0 1 => LNAH_A LNAH_B + // 1 1 => LNAL_A LNAL_B + switch(Get_SPI_Reg_bits(LMS7param(SEL_PATH_RFE))) + { + //set gpio1:gpio0 + case 0: regValue |= 0x0; break; + case 1: regValue |= 0x2; break; + case 2: regValue |= 0x3; break; + case 3: regValue |= 0x1; break; + } + SPI_write(0x0706, regValue); + } + return LIBLMS7_SUCCESS; +} + +/** @brief Reads all registers from the chip to host + +When used on Novena board, also updates gpios to match rx path and tx band selections +*/ +liblms7_status LMS7002M::DownloadAll() +{ + if (controlPort == nullptr) + return LIBLMS7_NO_CONNECTION_MANAGER; + if (controlPort->IsOpen() == false) + return LIBLMS7_NOT_CONNECTED; + liblms7_status status; + uint8_t ch = (uint8_t)Get_SPI_Reg_bits(LMS7param(MAC), false); + + vector addrToRead = mRegistersMap->GetUsedAddresses(0); + vector dataReceived; + dataReceived.resize(addrToRead.size(), 0); + Modify_SPI_Reg_bits(LMS7param(MAC), 1); + status = SPI_read_batch(&addrToRead[0], &dataReceived[0], addrToRead.size()); + if (status != LIBLMS7_SUCCESS) + return status; + + for (uint16_t i = 0; i < addrToRead.size(); ++i) + { + uint16_t adr = addrToRead[i]; + uint16_t val = dataReceived[i]; + mRegistersMap->SetValue(0, addrToRead[i], dataReceived[i]); + } + + addrToRead.clear(); //add only B channel addresses + addrToRead = mRegistersMap->GetUsedAddresses(1); + dataReceived.resize(addrToRead.size(), 0); + + Modify_SPI_Reg_bits(LMS7param(MAC), 2); + status = SPI_read_batch(&addrToRead[0], &dataReceived[0], addrToRead.size()); + if (status != LIBLMS7_SUCCESS) + return status; + for (uint16_t i = 0; i < addrToRead.size(); ++i) + mRegistersMap->SetValue(1, addrToRead[i], dataReceived[i]); + + Modify_SPI_Reg_bits(LMS7param(MAC), ch); //retore previously used channel + + //in case of Novena board, update GPIO + if(controlPort->GetInfo().device == LMS_DEV_NOVENA) + { + uint16_t regValue = SPI_read(0x0706) & 0xFFF8; + //lms_gpio2 - tx output selection: + // 0 - TX1_A and TX1_B (Band 1), + // 1 - TX2_A and TX2_B (Band 2) + regValue |= Get_SPI_Reg_bits(LMS7param(SEL_BAND2_TRF)) << 2; //gpio2 + //RX active paths + //lms_gpio0 | lms_gpio1 RX_A RX_B + // 0 0 => no active path + // 1 0 => LNAW_A LNAW_B + // 0 1 => LNAH_A LNAH_B + // 1 1 => LNAL_A LNAL_B + switch(Get_SPI_Reg_bits(LMS7param(SEL_PATH_RFE))) + { + //set gpio1:gpio0 + case 0: regValue |= 0x0; break; + case 1: regValue |= 0x2; break; + case 2: regValue |= 0x3; break; + case 3: regValue |= 0x1; break; + } + SPI_write(0x0706, regValue); + } + + return LIBLMS7_SUCCESS; +} + +/** @brief Configures interfaces for desired frequency + Sets interpolation and decimation, changes MCLK sources and TSP clock dividers accordingly to selected interpolation and decimation +*/ +liblms7_status LMS7002M::SetInterfaceFrequency(float_type cgen_freq_MHz, const uint8_t interpolation, const uint8_t decimation) +{ + Modify_SPI_Reg_bits(LMS7param(HBD_OVR_RXTSP), decimation); + Modify_SPI_Reg_bits(LMS7param(HBI_OVR_TXTSP), interpolation); + liblms7_status status = SetFrequencyCGEN(cgen_freq_MHz); + if (status != LIBLMS7_SUCCESS) + return status; + + if (decimation == 7 || decimation == 0) //bypass + { + Modify_SPI_Reg_bits(LMS7param(RXTSPCLKA_DIV), 0); + Modify_SPI_Reg_bits(LMS7param(RXDIVEN), false); + Modify_SPI_Reg_bits(LMS7param(MCLK2SRC), 3); + } + else + { + uint8_t divider = (uint8_t)pow(2.0, decimation); + if (divider > 1) + Modify_SPI_Reg_bits(LMS7param(RXTSPCLKA_DIV), (divider / 2) - 1); + else + Modify_SPI_Reg_bits(LMS7param(RXTSPCLKA_DIV), 0); + Modify_SPI_Reg_bits(LMS7param(RXDIVEN), true); + Modify_SPI_Reg_bits(LMS7param(MCLK2SRC), 1); + } + if (interpolation == 7 || interpolation == 0) //bypass + { + Modify_SPI_Reg_bits(LMS7param(TXTSPCLKA_DIV), 0); + Modify_SPI_Reg_bits(LMS7param(TXDIVEN), false); + Modify_SPI_Reg_bits(LMS7param(MCLK1SRC), 2); + } + else + { + uint8_t divider = (uint8_t)pow(2.0, interpolation); + if (divider > 1) + Modify_SPI_Reg_bits(LMS7param(TXTSPCLKA_DIV), (divider / 2) - 1); + else + Modify_SPI_Reg_bits(LMS7param(TXTSPCLKA_DIV), 0); + Modify_SPI_Reg_bits(LMS7param(TXDIVEN), true); + Modify_SPI_Reg_bits(LMS7param(MCLK1SRC), 0); + } + return status; +} diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/LMS7002M.h b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/LMS7002M.h new file mode 100644 index 0000000000..81234c28a3 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/LMS7002M.h @@ -0,0 +1,177 @@ +/** +@file LMS7002M.h +@author Lime Microsystems (www.limemicro.com) +@brief LMS7002M transceiver configuration interface +*/ + +#ifndef LMS7API_H +#define LMS7API_H + +#include "LMS7002M_statuses.h" +#include "LMS7002M_parameters.h" +#include "typedefs.h" + +#include + +class LMScomms; +class LMS7002M_RegistersMap; + +class LMS7002M +{ +public: + enum + { + Rx, Tx + }; + + LMS7002M(); + LMS7002M(LMScomms* controlPort); + virtual ~LMS7002M(); + + ///@name Registers writing and reading + liblms7_status UploadAll(); + liblms7_status DownloadAll(); + bool IsSynced(); + + liblms7_status ResetChip(); + liblms7_status LoadConfig(const char* filename); + liblms7_status SaveConfig(const char* filename); + ///@} + + ///@name Registers writing and reading + uint16_t Get_SPI_Reg_bits(const LMS7Parameter ¶m, bool fromChip = true); + uint16_t Get_SPI_Reg_bits(uint16_t address, uint8_t msb, uint8_t lsb, bool fromChip = true); + liblms7_status Modify_SPI_Reg_bits(const LMS7Parameter ¶m, const uint16_t value, bool fromChip = true); + liblms7_status Modify_SPI_Reg_bits(uint16_t address, uint8_t msb, uint8_t lsb, uint16_t value, bool fromChip = true); + liblms7_status SPI_write(uint16_t address, uint16_t data); + uint16_t SPI_read(uint16_t address, bool fromChip = true, liblms7_status *status = 0); + liblms7_status RegistersTest(); + ///@} + + ///@name Transmitter, Receiver calibrations + liblms7_status CalibrateRx(float_type bandwidth_MHz); + liblms7_status CalibrateTx(float_type bandwidth_MHz); + ///@} + + ///@name Filters tuning + enum TxFilter + { + TX_LADDER, TX_REALPOLE, TX_HIGHBAND + }; + enum RxFilter + { + RX_TIA, RX_LPF_LOWBAND, RX_LPF_HIGHBAND + }; + liblms7_status TuneTxFilter(TxFilter filterType, float_type bandwidth_MHz); + liblms7_status TuneTxFilterLowBandChain(float_type ladder_bw_MHz, float_type realpole_bw_MHz); + liblms7_status TuneRxFilter(RxFilter filterType, float_type bandwidth_MHz); + ///@} + + ///@name CGEN and PLL + float_type GetReferenceClk_SX(bool tx); + float_type GetFrequencyCGEN_MHz(); + liblms7_status SetFrequencyCGEN(float_type freq_MHz); + float_type GetFrequencySX_MHz(bool tx, float_type refClk_MHz); + liblms7_status SetFrequencySX(bool tx, float_type freq_MHz, float_type refClk_MHz); + ///VCO modules available for tuning + enum VCO_Module + { + VCO_CGEN, VCO_SXR, VCO_SXT + }; + liblms7_status TuneVCO(VCO_Module module); + ///@} + + ///@name TSP + liblms7_status LoadDC_REG_IQ(bool tx, int16_t I, int16_t Q); + liblms7_status SetNCOFrequency(bool tx, uint8_t index, float_type freq_MHz); + float_type GetNCOFrequency_MHz(bool tx, uint8_t index, float_type refClk_MHz, bool fromChip = true); + liblms7_status SetNCOPhaseOffsetForMode0(bool tx, float_type angle_Deg); + liblms7_status SetNCOPhaseOffset(bool tx, uint8_t index, float_type angle_Deg); + float_type GetNCOPhaseOffset_Deg(bool tx, uint8_t index); + liblms7_status SetGFIRCoefficients(bool tx, uint8_t GFIR_index, const int16_t *coef, uint8_t coefCount); + liblms7_status GetGFIRCoefficients(bool tx, uint8_t GFIR_index, int16_t *coef, uint8_t coefCount); + float_type GetReferenceClk_TSP_MHz(bool tx); + ///@} + + liblms7_status SetInterfaceFrequency(float_type cgen_freq_MHz, const uint8_t interpolation, const uint8_t decimation); + + ///enumeration to indicate module registers intervals + enum MemorySection + { + LimeLight = 0, EN_DIR, AFE, BIAS, XBUF, CGEN, LDO, BIST, CDS, + TRF, TBB, RFE, RBB, SX, TxTSP, + TxNCO, TxGFIR1, TxGFIR2, TxGFIR3a, TxGFIR3b, TxGFIR3c, + RxTSP, RxNCO, RxGFIR1, RxGFIR2, RxGFIR3a, RxGFIR3b, RxGFIR3c, + MEMORY_SECTIONS_COUNT + }; + virtual liblms7_status SetDefaults(MemorySection module); + LMScomms* GetControlPort() const { return controlPort;}; + + static const float_type gLadder_lower_limit; + static const float_type gLadder_higher_limit; + static const float_type gRealpole_lower_limit; + static const float_type gRealpole_higher_limit; + static const float_type gHighband_lower_limit; + static const float_type gHighband_higher_limit; + + static const float_type gRxTIA_higher_limit; + static const float_type gRxTIA_lower_limit_g1; + static const float_type gRxTIA_lower_limit_g23; + static const float_type gRxLPF_low_lower_limit; + static const float_type gRxLPF_low_higher_limit; + static const float_type gRxLPF_high_lower_limit; + static const float_type gRxLPF_high_higher_limit; + + static float_type gVCO_frequency_table[3][2]; + static float_type gCGEN_VCO_frequencies[2]; + + //protected: + LMS7002M_RegistersMap *mRegistersMap; + static const uint16_t readOnlyRegisters[]; + static const uint16_t readOnlyRegistersMasks[]; + + uint16_t MemorySectionAddresses[MEMORY_SECTIONS_COUNT][2]; + ///@name Algorithms functions + void BackupAllRegisters(); + void RestoreAllRegisters(); + uint32_t GetRSSI(); + void SetRxDCOFF(int8_t offsetI, int8_t offsetQ); + uint32_t FindMinRSSI_Gain(const LMS7Parameter ¶m, uint16_t *foundValue); + uint32_t FindMinRSSI(const LMS7Parameter ¶m, const int16_t startValue, int16_t *result, const uint8_t scanWidth, const uint8_t twoCompl, int8_t stepMult = 1); + uint32_t FindMinRSSI(const uint16_t addr, const uint8_t msb, const uint8_t lsb, const int16_t startValue, int16_t *result, const uint8_t scanWidth, const uint8_t twoCompl, int8_t stepMult = 1); + void CalibrateRxDC_RSSI(); + liblms7_status CalibrateTxSetup(float_type bandwidth_MHz); + liblms7_status CalibrateRxSetup(float_type bandwidth_MHz); + liblms7_status FixRXSaturation(); + void FilterTuning_AdjustGains(); + liblms7_status TuneTxFilterSetup(TxFilter type, float_type cutoff_MHz); + liblms7_status TuneRxFilterSetup(RxFilter type, float_type cutoff_MHz); + liblms7_status RFE_TIA_Calibration(float_type TIA_freq_MHz); + liblms7_status RxLPFLow_Calibration(float_type RxLPFL_freq_MHz); + liblms7_status RxLPFHigh_Calibration(float_type RxLPFH_freq_MHz); + + liblms7_status RegistersTestInterval(uint16_t startAddr, uint16_t endAddr, uint16_t pattern, std::stringstream &ss); + liblms7_status SPI_write_batch(const uint16_t* spiAddr, const uint16_t* spiData, uint16_t cnt); + liblms7_status SPI_read_batch(const uint16_t* spiAddr, uint16_t* spiData, uint16_t cnt); + liblms7_status Modify_SPI_Reg_mask(const uint16_t *addr, const uint16_t *masks, const uint16_t *values, uint8_t start, uint8_t stop); + ///@} + ///Reference clock used for Receiver frequency calculations + float_type mRefClkSXR_MHz; + ///Reference clock used for Transmitter frequency calculations + float_type mRefClkSXT_MHz; + + enum LogType + { + LOG_INFO, + LOG_WARNING, + LOG_ERROR, + LOG_DATA + }; + virtual void Log(const char* text, LogType type); + + ///port used for communicating with LMS7002M + LMScomms* controlPort; + + liblms7_status LoadConfigLegacyFile(const char* filename); +}; +#endif diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/LMS7002M_RegistersMap.cpp b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/LMS7002M_RegistersMap.cpp new file mode 100644 index 0000000000..8c870ffcc0 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/LMS7002M_RegistersMap.cpp @@ -0,0 +1,68 @@ +#include "LMS7002M_RegistersMap.h" +#include "LMS7002M_parameters.h" + +LMS7002M_RegistersMap::LMS7002M_RegistersMap() +{ + +} + +LMS7002M_RegistersMap::~LMS7002M_RegistersMap() +{ + +} + +uint16_t LMS7002M_RegistersMap::GetDefaultValue(uint16_t address) const +{ + std::map::const_iterator iter = mChannelA.find(address); + if( iter != mChannelA.end()) + return iter->second.defaultValue; + else + return 0; +} + +void LMS7002M_RegistersMap::InitializeDefaultValues(const std::vector parameterList) +{ + for(auto parameter : parameterList) + { + uint16_t regValue = mChannelA[parameter->address].defaultValue; + mChannelA[parameter->address].defaultValue = regValue | (parameter->defaultValue << parameter->lsb); + mChannelA[parameter->address].value = mChannelA[parameter->address].defaultValue; + if(parameter->address >= 0x0100) + mChannelB[parameter->address].value = mChannelA[parameter->address].value; + } +} + +void LMS7002M_RegistersMap::SetValue(uint8_t channel, const uint16_t address, const uint16_t value) +{ + if(channel == 0) + mChannelA[address].value = value; + else if(channel == 1) + mChannelB[address].value = value; +} + +uint16_t LMS7002M_RegistersMap::GetValue(uint8_t channel, uint16_t address) const +{ + const std::map *regMap; + if(channel == 0) + regMap = &mChannelA; + else if(channel == 1) + regMap = &mChannelB; + std::map::const_iterator iter; + iter = regMap->find(address); + if (iter != regMap->end()) + return iter->second.value; + else + return 0; +} + +std::vector LMS7002M_RegistersMap::GetUsedAddresses(const uint8_t channel) const +{ + std::vector addresses; + if(channel == 0) + for(auto iter : mChannelA) + addresses.push_back(iter.first); + else if(channel == 1) + for(auto iter : mChannelB) + addresses.push_back(iter.first); + return addresses; +} diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/LMS7002M_RegistersMap.h b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/LMS7002M_RegistersMap.h new file mode 100644 index 0000000000..5ccda752db --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/LMS7002M_RegistersMap.h @@ -0,0 +1,35 @@ +#ifndef LMS7002M_REGISTERS_MAP_H +#define LMS7002M_REGISTERS_MAP_H + +#include +#include +#include + +struct LMS7Parameter; + +class LMS7002M_RegistersMap +{ +public: + struct Register + { + uint16_t value; + uint16_t defaultValue; + uint16_t mask; + }; + + LMS7002M_RegistersMap(); + ~LMS7002M_RegistersMap(); + + uint16_t GetValue(uint8_t channel, uint16_t address) const; + void SetValue(uint8_t channel, const uint16_t address, const uint16_t value); + + void InitializeDefaultValues(const std::vector parameterList); + uint16_t GetDefaultValue(uint16_t address) const; + std::vector GetUsedAddresses(const uint8_t channel) const; + +protected: + std::map mChannelA; + std::map mChannelB; +}; + +#endif diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/LMS7002M_filtersCalibration.cpp b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/LMS7002M_filtersCalibration.cpp new file mode 100644 index 0000000000..2f3d38c1b5 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/LMS7002M_filtersCalibration.cpp @@ -0,0 +1,861 @@ +/** +@file LMS7002M_filtersCalibration.cpp +@author Lime Microsystems (www.limemicro.com) +@brief Implementation of LMS7002M transceiver filters calibration algorithms +*/ + +#include "LMS7002M.h" +#include + +///define for parameter enumeration if prefix might be needed +#define LMS7param(id) id + +const float_type LMS7002M::gLadder_lower_limit = 2; +const float_type LMS7002M::gLadder_higher_limit = 16; +const float_type LMS7002M::gRealpole_lower_limit = 0.8; +const float_type LMS7002M::gRealpole_higher_limit = 3.2; +const float_type LMS7002M::gHighband_lower_limit = 28; +const float_type LMS7002M::gHighband_higher_limit = 70; + +const float_type LMS7002M::gRxTIA_higher_limit = 60; +const float_type LMS7002M::gRxTIA_lower_limit_g1 = 1.5; +const float_type LMS7002M::gRxTIA_lower_limit_g23 = 0.5; +const float_type LMS7002M::gRxLPF_low_lower_limit = 1; +const float_type LMS7002M::gRxLPF_low_higher_limit = 20; +const float_type LMS7002M::gRxLPF_high_lower_limit = 20; +const float_type LMS7002M::gRxLPF_high_higher_limit = 70; + +liblms7_status LMS7002M::TuneTxFilterSetup(LMS7002M::TxFilter type, float_type cutoff_MHz) +{ + Modify_SPI_Reg_bits(LMS7param(EN_G_RFE), 0); + Modify_SPI_Reg_bits(LMS7param(EN_G_TRF), 0); + + //RBB + SetDefaults(RBB); + Modify_SPI_Reg_bits(LMS7param(PD_LPFL_RBB), 1); + Modify_SPI_Reg_bits(LMS7param(INPUT_CTL_PGA_RBB), 3); + Modify_SPI_Reg_bits(LMS7param(ICT_PGA_OUT_RBB), 20); + Modify_SPI_Reg_bits(LMS7param(ICT_PGA_IN_RBB), 20); + Modify_SPI_Reg_bits(LMS7param(C_CTL_PGA_RBB), 3); + + //TBB + SetDefaults(TBB); + Modify_SPI_Reg_bits(LMS7param(CG_IAMP_TBB), 1); + Modify_SPI_Reg_bits(LMS7param(ICT_IAMP_FRP_TBB), 1); + Modify_SPI_Reg_bits(LMS7param(ICT_IAMP_GG_FRP_TBB), 6); + + //AFE + uint8_t isel_dac_afe = (uint8_t)Get_SPI_Reg_bits(0x0082, 15, 13); + SetDefaults(AFE); + if (Get_SPI_Reg_bits(LMS7param(MAC)) == 2) + { + Modify_SPI_Reg_bits(LMS7param(PD_TX_AFE2), 0); //PD_RX_AFE2 0 + Modify_SPI_Reg_bits(LMS7param(PD_RX_AFE2), 0); //PD_RX_AFE2 0 + } + Modify_SPI_Reg_bits(0x0082, 15, 13, isel_dac_afe); + + //BIAS + uint8_t rpcalib_bias = (uint8_t)Get_SPI_Reg_bits(LMS7param(RP_CALIB_BIAS)); + SetDefaults(BIAS); + Modify_SPI_Reg_bits(LMS7param(RP_CALIB_BIAS), rpcalib_bias); + + //XBUF + Modify_SPI_Reg_bits(LMS7param(PD_XBUF_RX), 0); + Modify_SPI_Reg_bits(LMS7param(PD_XBUF_TX), 0); + Modify_SPI_Reg_bits(LMS7param(EN_G_XBUF), 1); + + //CGEN + SetDefaults(CGEN); + + //txtsp + SetDefaults(TxTSP); + Modify_SPI_Reg_bits(LMS7param(TSGMODE_TXTSP), 1); + Modify_SPI_Reg_bits(LMS7param(INSEL_TXTSP), 1); + Modify_SPI_Reg_bits(0x0208, 6, 4, 7); + LoadDC_REG_IQ(Tx, (int16_t)0x7FFF, (int16_t)0x8000); + float_type txNCOfreq = 0.05; + SetNCOFrequency(Tx, 0, txNCOfreq); + + //rxtsp + SetDefaults(RxTSP); + SetNCOFrequency(Rx, 0, txNCOfreq - 1); + + Modify_SPI_Reg_bits(LMS7param(AGC_MODE_RXTSP), 1); + Modify_SPI_Reg_bits(0x040C, 6, 3, 0x07); + + Modify_SPI_Reg_bits(LMS7param(AGC_AVG_RXTSP), 7); + Modify_SPI_Reg_bits(LMS7param(CMIX_GAIN_RXTSP), 1); + + return LIBLMS7_SUCCESS; +} + + +liblms7_status LMS7002M::TuneTxFilter(LMS7002M::TxFilter type, float_type cutoff_MHz) +{ + liblms7_status status; + float_type lowLimit = 0; + float_type highLimit = 1000; + uint32_t rssi = 0; + int8_t dir; + uint8_t ccal_lpflad_tbb; + uint32_t rssi_value_100k; + int16_t rcal; + + float_type ncoFreq = 0.05; + float_type cgenFreq; + uint8_t loopb_tbb; + uint8_t cg_iamp_tbb = 1; + uint8_t bypladder_tbb; + uint8_t pd_lpfh_tbb; + uint8_t pd_lpflad_tbb; + uint8_t pd_lpfs5; + uint8_t en_g_tbb = 1; + uint8_t pd_iamp_tbb = 0; + uint8_t tstin_tbb = 0; + + BackupAllRegisters(); + //float_type userCLKGENfreq = GetFrequencyCGEN_MHz(); + + status = TuneTxFilterSetup(type, cutoff_MHz); + if (status != LIBLMS7_SUCCESS) + goto TxFilterTuneEnd; + cgenFreq = cutoff_MHz * 20; + if (cgenFreq < 60) + cgenFreq = 60; + if (cgenFreq > 640) + cgenFreq = 640; + if (type == TX_LADDER) + { + loopb_tbb = 2; + bypladder_tbb = 0; + pd_lpfh_tbb = 1; + pd_lpflad_tbb = 0; + pd_lpfs5 = 1; + lowLimit = gLadder_lower_limit; + highLimit = gLadder_higher_limit; + } + else if (type == TX_REALPOLE) + { + loopb_tbb = 3; + bypladder_tbb = 1; + pd_lpfh_tbb = 1; + pd_lpflad_tbb = 1; + pd_lpfs5 = 0; + lowLimit = gRealpole_lower_limit; + highLimit = gRealpole_higher_limit; + } + else if (type == TX_HIGHBAND) + { + loopb_tbb = 3; + bypladder_tbb = 0; + pd_lpfh_tbb = 0; + pd_lpflad_tbb = 1; + pd_lpfs5 = 1; + lowLimit = gHighband_lower_limit; + highLimit = gHighband_higher_limit; + } + if (cutoff_MHz == cgenFreq / 16) + cgenFreq -= 10; + + if (cutoff_MHz < lowLimit || cutoff_MHz > highLimit) + { + status = LIBLMS7_FREQUENCY_OUT_OF_RANGE; + goto TxFilterTuneEnd; + } + + status = SetFrequencyCGEN(cgenFreq); + if (status != LIBLMS7_SUCCESS) + goto TxFilterTuneEnd; + + Modify_SPI_Reg_bits(LMS7param(LOOPB_TBB), loopb_tbb); + Modify_SPI_Reg_bits(LMS7param(CG_IAMP_TBB), cg_iamp_tbb); + Modify_SPI_Reg_bits(LMS7param(BYPLADDER_TBB), bypladder_tbb); + Modify_SPI_Reg_bits(LMS7param(TSTIN_TBB), tstin_tbb); + Modify_SPI_Reg_bits(LMS7param(PD_LPFH_TBB), pd_lpfh_tbb); + Modify_SPI_Reg_bits(LMS7param(PD_LPFIAMP_TBB), pd_iamp_tbb); + Modify_SPI_Reg_bits(LMS7param(PD_LPFLAD_TBB), pd_lpflad_tbb); + Modify_SPI_Reg_bits(LMS7param(PD_LPFS5_TBB), pd_lpfs5); + Modify_SPI_Reg_bits(LMS7param(EN_G_TBB), en_g_tbb); + + //B + //LADDER coefficients + float_type p1, p2, p3, p4, p5; + switch (type) + { + case TX_LADDER: + p1 = 1.29858903647958E-16; + p2 = -0.000110746929967704; + p3 = 0.00277593485991029; + p4 = 21.0384293169607; + p5 = -48.4092606238297; + break; + case TX_REALPOLE: + p1 = 1.93821841029921E-15; + p2 = -0.0429694461214244; + p3 = 0.253501254059498; + p4 = 88.9545445989649; + p5 = -48.0847491316861; + break; + case TX_HIGHBAND: + p1 = 1.10383E-06; + p2 = -0.0002108; + p3 = 0.019049487; + p4 = 1.433174459; + p5 = -47.69507793; + break; + } + rcal = (int16_t)(pow(cutoff_MHz, 4)*p1 + pow(cutoff_MHz, 3)*p2 + pow(cutoff_MHz, 2)*p3 + cutoff_MHz * p4 + p5); + if (rcal < 0) + rcal = 0; + if (rcal > 255) + rcal = 255; + + if (type == TX_REALPOLE) + Modify_SPI_Reg_bits(LMS7param(RCAL_LPFS5_TBB), rcal); + else if (type == TX_LADDER) + Modify_SPI_Reg_bits(LMS7param(RCAL_LPFLAD_TBB), rcal); + else if (type == TX_HIGHBAND) + Modify_SPI_Reg_bits(LMS7param(RCAL_LPFH_TBB), rcal); + + FilterTuning_AdjustGains(); + + rssi_value_100k = (uint32_t)( GetRSSI()*0.707 ); + + SetNCOFrequency(Tx, 0, cutoff_MHz); + SetNCOFrequency(Rx, 0, cutoff_MHz - 1); + + for (ccal_lpflad_tbb = 31; ccal_lpflad_tbb > 0; --ccal_lpflad_tbb) + { + Modify_SPI_Reg_bits(LMS7param(CCAL_LPFLAD_TBB), ccal_lpflad_tbb); + rssi = GetRSSI(); + if (rssi > rssi_value_100k && ccal_lpflad_tbb == 31) + break; //skip this search, continue to advanced search + if (rssi > rssi_value_100k) + { + status = LIBLMS7_SUCCESS; + goto TxFilterTuneEnd; //found correct value + } + } + + + //advanced search for c and r values + status = LIBLMS7_FAILURE; + dir = ccal_lpflad_tbb == 31 ? -1 : 1; + while (rcal > 0 && rcal < 255) + { + rcal += 5 * dir; + if (rcal < 0 && rcal > 255) + break; + if (type == TX_REALPOLE) + Modify_SPI_Reg_bits(LMS7param(RCAL_LPFS5_TBB), rcal); + else if (type == TX_LADDER) + Modify_SPI_Reg_bits(LMS7param(RCAL_LPFLAD_TBB), rcal); + else if (type == TX_HIGHBAND) + Modify_SPI_Reg_bits(LMS7param(RCAL_LPFH_TBB), rcal); + SetNCOFrequency(Tx, 0, ncoFreq); + SetNCOFrequency(Rx, 0, ncoFreq - 1); + Modify_SPI_Reg_bits(LMS7param(CCAL_LPFLAD_TBB), 16); + rssi_value_100k = GetRSSI(); + SetNCOFrequency(Tx, 0, cutoff_MHz); + SetNCOFrequency(Rx, 0, cutoff_MHz - 1); + for (ccal_lpflad_tbb = 31; ccal_lpflad_tbb > 0; --ccal_lpflad_tbb) + { + Modify_SPI_Reg_bits(LMS7param(CCAL_LPFLAD_TBB), ccal_lpflad_tbb); + rssi = GetRSSI(); + if (rssi > rssi_value_100k*0.707 && ccal_lpflad_tbb == 31) + break; //skip c search, need to change r value + if (rssi > rssi_value_100k*0.707) + { + status = LIBLMS7_SUCCESS; + goto TxFilterTuneEnd; + } + } + } + + //end +TxFilterTuneEnd: + RestoreAllRegisters(); + if (status != LIBLMS7_SUCCESS) + return status; + Modify_SPI_Reg_bits(LMS7param(CCAL_LPFLAD_TBB), ccal_lpflad_tbb); + Modify_SPI_Reg_bits(LMS7param(ICT_IAMP_FRP_TBB), 1); + Modify_SPI_Reg_bits(LMS7param(ICT_IAMP_GG_FRP_TBB), 6); + + if (type == TX_REALPOLE) + Modify_SPI_Reg_bits(LMS7param(RCAL_LPFS5_TBB), rcal); + else if (type == TX_LADDER) + Modify_SPI_Reg_bits(LMS7param(RCAL_LPFLAD_TBB), rcal); + else if (type == TX_HIGHBAND) + { + Modify_SPI_Reg_bits(LMS7param(RCAL_LPFH_TBB), rcal); + Modify_SPI_Reg_bits(0x0105, 4, 0, 0x7); //set powerdowns + } + return LIBLMS7_SUCCESS; +} + +void LMS7002M::FilterTuning_AdjustGains() +{ + uint8_t cg_iamp_tbb; + uint32_t rssi = 0; + const uint32_t rssi_required = 0x8400; + uint8_t g_pga_rbb = (uint8_t)Get_SPI_Reg_bits(LMS7param(G_PGA_RBB)); + + while (g_pga_rbb < 31) + { + cg_iamp_tbb = 0; + while (cg_iamp_tbb < 63 && rssi < rssi_required) + { + Modify_SPI_Reg_bits(LMS7param(CG_IAMP_TBB), cg_iamp_tbb); + rssi = GetRSSI(); + if (rssi > rssi_required) + return; + ++cg_iamp_tbb; + } + g_pga_rbb += 6; + if (g_pga_rbb > 31) + g_pga_rbb = 31; + Modify_SPI_Reg_bits(LMS7param(G_PGA_RBB), g_pga_rbb); + } +} + +liblms7_status LMS7002M::TuneTxFilterLowBandChain(float_type bandwidth, float_type realpole_MHz) +{ + uint32_t rssi; + uint32_t rssi_value_10k; + bool prevRSSIbigger; + int16_t rcal; + float_type p1,p2,p3,p4,p5; + float_type ncoFreq = 0.05; + float_type cgenFreq; + BackupAllRegisters(); + + liblms7_status status = TuneTxFilter(TX_LADDER, bandwidth); + uint8_t ladder_c_value = (uint8_t)Get_SPI_Reg_bits(LMS7param(CCAL_LPFLAD_TBB)); + uint8_t ladder_r_value = (uint8_t)Get_SPI_Reg_bits(LMS7param(RCAL_LPFLAD_TBB)); + status = TuneTxFilterSetup(TX_LADDER, bandwidth); + + if (bandwidth < gLadder_lower_limit || bandwidth > gLadder_higher_limit) + { + status = LIBLMS7_FREQUENCY_OUT_OF_RANGE; + goto TxFilterLowBandChainEnd; + } + + //realpole calibration + //float userCLKGENfreq = GetFrequencyCGEN(); + + cgenFreq = realpole_MHz * 20; + if (cgenFreq < 60) + cgenFreq = 60; + if (cgenFreq > 640) + cgenFreq = 640; + + if (realpole_MHz < gRealpole_lower_limit || realpole_MHz > gRealpole_higher_limit) + { + status = LIBLMS7_FREQUENCY_OUT_OF_RANGE; + goto TxFilterLowBandChainEnd; + } + + status = SetFrequencyCGEN(cgenFreq); + if (status != LIBLMS7_SUCCESS) + goto TxFilterLowBandChainEnd; + + Modify_SPI_Reg_bits(LMS7param(LOOPB_TBB), 3); + Modify_SPI_Reg_bits(LMS7param(CG_IAMP_TBB), 1); + Modify_SPI_Reg_bits(LMS7param(BYPLADDER_TBB), 1); + Modify_SPI_Reg_bits(LMS7param(TSTIN_TBB), 0); + Modify_SPI_Reg_bits(LMS7param(PD_LPFH_TBB), 1); + Modify_SPI_Reg_bits(LMS7param(PD_LPFIAMP_TBB), 0); + Modify_SPI_Reg_bits(LMS7param(PD_LPFLAD_TBB), 1); + Modify_SPI_Reg_bits(LMS7param(PD_LPFS5_TBB), 0); + Modify_SPI_Reg_bits(LMS7param(EN_G_TBB), 1); + + //B + p1 = 1.93821841029921E-15; + p2 = -0.0429694461214244; + p3 = 0.253501254059498; + p4 = 88.9545445989649; + p5 = -48.0847491316861; + rcal = (int16_t)(pow(realpole_MHz, 4)*p1 + pow(realpole_MHz, 3)*p2 + pow(realpole_MHz, 2)*p3 + realpole_MHz * p4 + p5); + if (rcal < 0) + rcal = 0; + if (rcal > 255) + rcal = 255; + Modify_SPI_Reg_bits(LMS7param(RCAL_LPFS5_TBB), rcal); + + FilterTuning_AdjustGains(); + + rssi_value_10k = GetRSSI(); + SetNCOFrequency(Tx, 0, realpole_MHz); + SetNCOFrequency(Rx, 0, realpole_MHz - 1); + + prevRSSIbigger = GetRSSI() > rssi_value_10k*0.707; + status = LIBLMS7_FAILURE; //assuming r value is not found + while (rcal >= 0 && rcal < 256) + { + Modify_SPI_Reg_bits(LMS7param(RCAL_LPFS5_TBB), rcal); + SetNCOFrequency(Tx, 0, ncoFreq); + SetNCOFrequency(Rx, 0, ncoFreq - 1); + rssi_value_10k = (uint32_t)( GetRSSI()*0.707 ); + + SetNCOFrequency(Tx, 0, realpole_MHz); + SetNCOFrequency(Rx, 0, realpole_MHz - 1); + + rssi = GetRSSI(); + if (rssi > rssi_value_10k) + --rcal; + else + { + if (prevRSSIbigger) + { + --rcal; + status = LIBLMS7_SUCCESS; + goto TxFilterLowBandChainEnd; + } + ++rcal; + } + prevRSSIbigger = rssi > rssi_value_10k; + } + + //end +TxFilterLowBandChainEnd: + RestoreAllRegisters(); + if (status != LIBLMS7_SUCCESS) + return status; + + Modify_SPI_Reg_bits(LMS7param(CCAL_LPFLAD_TBB), ladder_c_value); + Modify_SPI_Reg_bits(LMS7param(RCAL_LPFLAD_TBB), ladder_r_value); + Modify_SPI_Reg_bits(LMS7param(ICT_IAMP_FRP_TBB), 1); + Modify_SPI_Reg_bits(LMS7param(ICT_IAMP_GG_FRP_TBB), 6); + Modify_SPI_Reg_bits(LMS7param(RCAL_LPFS5_TBB), rcal); + Modify_SPI_Reg_bits(0x0105, 4, 0, 0x11); //set powerdowns + + return LIBLMS7_SUCCESS; +} + +liblms7_status LMS7002M::TuneRxFilter(RxFilter filter, float_type bandwidth_MHz) +{ + liblms7_status status; + uint16_t cfb_tia_rfe; + uint16_t c_ctl_lpfl_rbb; + uint8_t ccomp_tia_rfe; + uint8_t rcomp_tia_rfe; + uint8_t c_ctl_lpfh_rbb; + uint8_t ict_pga_out; + uint8_t ict_pga_in; + uint8_t r_ctl_lpf_rbb; + uint8_t c_ctl_pga_rbb; + uint8_t rcc_ctl_lpfl_rbb; + uint8_t rcc_ctl_lpfh_rbb; + float_type lowerLimit; + float_type higherLimit; + if (filter == RX_TIA) + { + lowerLimit = Get_SPI_Reg_bits(LMS7param(G_TIA_RFE)) == 1 ? gRxTIA_lower_limit_g1 : gRxTIA_lower_limit_g23; + higherLimit = gRxTIA_higher_limit; + } + else if (filter == RX_LPF_LOWBAND) + { + lowerLimit = gRxLPF_low_lower_limit; + higherLimit = gRxLPF_low_higher_limit; + } + else if (filter == RX_LPF_HIGHBAND) + { + lowerLimit = gRxLPF_high_lower_limit; + higherLimit = gRxLPF_high_higher_limit; + } + if (bandwidth_MHz < lowerLimit || bandwidth_MHz > higherLimit) + return LIBLMS7_FREQUENCY_OUT_OF_RANGE; + + BackupAllRegisters(); + + status = TuneRxFilterSetup(filter, bandwidth_MHz); + if (status != LIBLMS7_SUCCESS) + goto RxFilterTuneEnd; + + if (filter == RX_TIA) + status = RFE_TIA_Calibration(bandwidth_MHz); + else if (filter == RX_LPF_LOWBAND) + status = RxLPFLow_Calibration(bandwidth_MHz); + else if (filter == RX_LPF_HIGHBAND) + status = RxLPFHigh_Calibration(bandwidth_MHz); + + cfb_tia_rfe = Get_SPI_Reg_bits(LMS7param(CFB_TIA_RFE)); + c_ctl_lpfl_rbb = Get_SPI_Reg_bits(LMS7param(C_CTL_LPFL_RBB)); + ccomp_tia_rfe = (int8_t)Get_SPI_Reg_bits(LMS7param(CCOMP_TIA_RFE)); + rcomp_tia_rfe = (int8_t)Get_SPI_Reg_bits(LMS7param(RCOMP_TIA_RFE)); + c_ctl_lpfh_rbb = (int8_t)Get_SPI_Reg_bits(LMS7param(C_CTL_LPFH_RBB)); + ict_pga_out = (int8_t)Get_SPI_Reg_bits(LMS7param(ICT_PGA_OUT_RBB)); + ict_pga_in = (int8_t)Get_SPI_Reg_bits(LMS7param(ICT_PGA_IN_RBB)); + r_ctl_lpf_rbb = (int8_t)Get_SPI_Reg_bits(LMS7param(R_CTL_LPF_RBB)); + c_ctl_pga_rbb = (int8_t)Get_SPI_Reg_bits(LMS7param(C_CTL_PGA_RBB)); + rcc_ctl_lpfl_rbb = (int8_t)Get_SPI_Reg_bits(LMS7param(RCC_CTL_LPFL_RBB)); + rcc_ctl_lpfh_rbb = (int8_t)Get_SPI_Reg_bits(LMS7param(RCC_CTL_LPFH_RBB)); + +RxFilterTuneEnd: + RestoreAllRegisters(); + if (status != LIBLMS7_SUCCESS) + return status; + + if (filter == RX_TIA) + { + Modify_SPI_Reg_bits(LMS7param(ICT_TIAMAIN_RFE), 2); + Modify_SPI_Reg_bits(LMS7param(ICT_TIAOUT_RFE), 2); + Modify_SPI_Reg_bits(LMS7param(RFB_TIA_RFE), 16); + Modify_SPI_Reg_bits(LMS7param(CFB_TIA_RFE), cfb_tia_rfe); + Modify_SPI_Reg_bits(LMS7param(CCOMP_TIA_RFE), ccomp_tia_rfe); + Modify_SPI_Reg_bits(LMS7param(RCOMP_TIA_RFE), rcomp_tia_rfe); + Modify_SPI_Reg_bits(0x010c, 1, 0, 0x1); + } + else if (filter == RX_LPF_LOWBAND) + { + Modify_SPI_Reg_bits(LMS7param(RCC_CTL_LPFL_RBB), rcc_ctl_lpfl_rbb); + Modify_SPI_Reg_bits(LMS7param(C_CTL_LPFL_RBB), c_ctl_lpfl_rbb); + Modify_SPI_Reg_bits(LMS7param(ICT_PGA_OUT_RBB), ict_pga_out); + Modify_SPI_Reg_bits(LMS7param(ICT_PGA_IN_RBB), ict_pga_in); + Modify_SPI_Reg_bits(LMS7param(R_CTL_LPF_RBB), r_ctl_lpf_rbb); + Modify_SPI_Reg_bits(LMS7param(C_CTL_PGA_RBB), c_ctl_pga_rbb); + Modify_SPI_Reg_bits(0x0115, 3, 0, 0x9); + Modify_SPI_Reg_bits(0x0118, 15, 13, 0x1); + } + else if (filter == RX_LPF_HIGHBAND) + { + Modify_SPI_Reg_bits(LMS7param(RCC_CTL_LPFH_RBB), rcc_ctl_lpfh_rbb); + Modify_SPI_Reg_bits(LMS7param(C_CTL_LPFH_RBB), c_ctl_lpfh_rbb); + Modify_SPI_Reg_bits(LMS7param(ICT_PGA_OUT_RBB), ict_pga_out); + Modify_SPI_Reg_bits(LMS7param(ICT_PGA_IN_RBB), ict_pga_in); + Modify_SPI_Reg_bits(LMS7param(R_CTL_LPF_RBB), r_ctl_lpf_rbb); + Modify_SPI_Reg_bits(LMS7param(C_CTL_PGA_RBB), c_ctl_pga_rbb); + Modify_SPI_Reg_bits(0x0115, 3, 0, 0x5); + Modify_SPI_Reg_bits(0x0118, 15, 13, 0x0); + } + return LIBLMS7_SUCCESS; +} + +liblms7_status LMS7002M::TuneRxFilterSetup(RxFilter type, float_type cutoff_MHz) +{ + liblms7_status status; + uint8_t ch = (uint8_t)Get_SPI_Reg_bits(LMS7param(MAC)); + + //RFE + uint8_t g_tia_rfe = (uint8_t)Get_SPI_Reg_bits(LMS7param(G_TIA_RFE)); + SetDefaults(RFE); + Modify_SPI_Reg_bits(LMS7param(SEL_PATH_RFE), 2); + + if (ch == 2) + Modify_SPI_Reg_bits(LMS7param(EN_NEXTRX_RFE), 1); + else + Modify_SPI_Reg_bits(LMS7param(EN_NEXTRX_RFE), 0); + + Modify_SPI_Reg_bits(LMS7param(G_RXLOOPB_RFE), 8); + Modify_SPI_Reg_bits(LMS7param(PD_RLOOPB_2_RFE), 0); + Modify_SPI_Reg_bits(LMS7param(EN_INSHSW_LB2_RFE), 0); + Modify_SPI_Reg_bits(LMS7param(PD_MXLOBUF_RFE), 0); + Modify_SPI_Reg_bits(LMS7param(PD_QGEN_RFE), 0); + Modify_SPI_Reg_bits(LMS7param(ICT_TIAMAIN_RFE), 2); + Modify_SPI_Reg_bits(LMS7param(ICT_TIAOUT_RFE), 2); + Modify_SPI_Reg_bits(LMS7param(RFB_TIA_RFE), 16); + Modify_SPI_Reg_bits(LMS7param(G_TIA_RFE), g_tia_rfe); + + //RBB + SetDefaults(RBB); + Modify_SPI_Reg_bits(LMS7param(ICT_PGA_OUT_RBB), 20); + Modify_SPI_Reg_bits(LMS7param(ICT_PGA_IN_RBB), 20); + Modify_SPI_Reg_bits(LMS7param(C_CTL_PGA_RBB), 3); + + //TRF + SetDefaults(TRF); + Modify_SPI_Reg_bits(LMS7param(L_LOOPB_TXPAD_TRF), 0); + Modify_SPI_Reg_bits(LMS7param(EN_LOOPB_TXPAD_TRF), 1); + if (ch == 2) + Modify_SPI_Reg_bits(LMS7param(EN_NEXTTX_TRF), 1); + else + Modify_SPI_Reg_bits(LMS7param(EN_NEXTTX_TRF), 0); + Modify_SPI_Reg_bits(LMS7param(SEL_BAND1_TRF), 0); + Modify_SPI_Reg_bits(LMS7param(SEL_BAND2_TRF), 1); + + //TBB + SetDefaults(TBB); + Modify_SPI_Reg_bits(LMS7param(CG_IAMP_TBB), 1); + Modify_SPI_Reg_bits(LMS7param(ICT_IAMP_FRP_TBB), 1); + Modify_SPI_Reg_bits(LMS7param(ICT_IAMP_GG_FRP_TBB), 6); + + //AFE + SetDefaults(AFE); + if (ch == 2) + { + Modify_SPI_Reg_bits(LMS7param(PD_TX_AFE2), 0); + Modify_SPI_Reg_bits(LMS7param(PD_RX_AFE2), 0); + } + //BIAS + uint8_t rp_calib_bias = (uint8_t)Get_SPI_Reg_bits(LMS7param(RP_CALIB_BIAS)); + SetDefaults(BIAS); + Modify_SPI_Reg_bits(LMS7param(RP_CALIB_BIAS), rp_calib_bias); + + //XBUF + Modify_SPI_Reg_bits(LMS7param(PD_XBUF_RX), 0); + Modify_SPI_Reg_bits(LMS7param(PD_XBUF_TX), 0); + Modify_SPI_Reg_bits(LMS7param(EN_G_TRF), 1); + + //CLKGEN + SetDefaults(CGEN); + + //SXR + Modify_SPI_Reg_bits(LMS7param(MAC), 1); + SetDefaults(SX); + status = SetFrequencySX(Rx, 499.95, mRefClkSXR_MHz); + if (status != LIBLMS7_SUCCESS) + return status; + Modify_SPI_Reg_bits(LMS7param(PD_VCO), 0); + + //SXT + Modify_SPI_Reg_bits(LMS7param(MAC), 2); + SetDefaults(SX); + status = SetFrequencySX(Tx, 500, mRefClkSXT_MHz); + if (status != LIBLMS7_SUCCESS) + return status; + Modify_SPI_Reg_bits(LMS7param(PD_VCO), 0); + + Modify_SPI_Reg_bits(LMS7param(MAC), ch); + //TxTSP + SetDefaults(TxTSP); + Modify_SPI_Reg_bits(LMS7param(TSGMODE_TXTSP), 1); + Modify_SPI_Reg_bits(LMS7param(INSEL_TXTSP), 1); + Modify_SPI_Reg_bits(0x0208, 8, 8, 1); + Modify_SPI_Reg_bits(0x0208, 6, 4, 0x7); + LoadDC_REG_IQ(Tx, (int16_t)0x7FFF, (int16_t)0x8000); + SetNCOFrequency(Tx, 0, 0); + + //RxTSP + SetDefaults(RxTSP); + Modify_SPI_Reg_bits(LMS7param(AGC_MODE_RXTSP), 1); + Modify_SPI_Reg_bits(0x040C, 5, 3, 0x7); + Modify_SPI_Reg_bits(LMS7param(AGC_AVG_RXTSP), 7); + Modify_SPI_Reg_bits(LMS7param(CMIX_GAIN_RXTSP), 1); + + float_type sxtfreq = GetFrequencySX_MHz(Tx, mRefClkSXT_MHz); + float_type sxrfreq = GetFrequencySX_MHz(Rx, mRefClkSXR_MHz); + SetNCOFrequency(Rx, 0, sxtfreq - sxrfreq - 1); + return LIBLMS7_SUCCESS; +} + +liblms7_status LMS7002M::RFE_TIA_Calibration(float_type TIA_freq_MHz) +{ + liblms7_status status; + bool prevRSSIbigger; + uint8_t ccomp_tia_rfe_value; + int16_t rcomp_tia_rfe; + float_type cgenFreq = TIA_freq_MHz * 20; + uint32_t rssi; + uint32_t rssi_value_50k; + //RFE + uint8_t g_tia_rfe = (uint8_t)Get_SPI_Reg_bits(LMS7param(G_TIA_RFE)); + int16_t cfb_tia_rfe_value; + if (g_tia_rfe == 1) + cfb_tia_rfe_value = (uint16_t)(5400 / TIA_freq_MHz - 15); + else if (g_tia_rfe > 1) + cfb_tia_rfe_value = (uint16_t)(1680 / TIA_freq_MHz - 10); + else + return LIBLMS7_FAILURE; + Modify_SPI_Reg_bits(LMS7param(CFB_TIA_RFE), cfb_tia_rfe_value); + + if (g_tia_rfe == 1) + ccomp_tia_rfe_value = (uint8_t)(cfb_tia_rfe_value / 100 + 1); + else if (g_tia_rfe > 1) + ccomp_tia_rfe_value = (uint8_t)(cfb_tia_rfe_value / 100); + else + return LIBLMS7_FAILURE; + if (ccomp_tia_rfe_value > 15) + ccomp_tia_rfe_value = 15; + + Modify_SPI_Reg_bits(LMS7param(CCOMP_TIA_RFE), ccomp_tia_rfe_value); + + rcomp_tia_rfe = (int16_t)(15 - cfb_tia_rfe_value * 2 / 100); + if (rcomp_tia_rfe < 0) + rcomp_tia_rfe = 0; + Modify_SPI_Reg_bits(LMS7param(RCOMP_TIA_RFE), rcomp_tia_rfe); + + //RBB + Modify_SPI_Reg_bits(LMS7param(INPUT_CTL_PGA_RBB), 2); + Modify_SPI_Reg_bits(LMS7param(PD_LPFL_RBB), 1); + + //CLKGEN + if (cgenFreq < 60) + cgenFreq = 60; + if (cgenFreq > 640) + cgenFreq = 640; + + if (cgenFreq / 16 == TIA_freq_MHz) + status = SetFrequencyCGEN(cgenFreq - 10); + else + status = SetFrequencyCGEN(cgenFreq); + if (status != LIBLMS7_SUCCESS) + return status; + + FilterTuning_AdjustGains(); + + rssi_value_50k = (uint32_t)( GetRSSI() * 0.707 ); + status = SetFrequencySX(Rx, GetFrequencySX_MHz(Tx, mRefClkSXT_MHz) - TIA_freq_MHz, mRefClkSXR_MHz); + if (status != LIBLMS7_SUCCESS) + return status; + SetNCOFrequency(Rx, 0, GetFrequencySX_MHz(Tx, mRefClkSXT_MHz) - GetFrequencySX_MHz(Rx, mRefClkSXR_MHz) - 1); + + prevRSSIbigger = GetRSSI() > rssi_value_50k; + while (cfb_tia_rfe_value >= 0 && cfb_tia_rfe_value < 4096) + { + Modify_SPI_Reg_bits(LMS7param(CFB_TIA_RFE), cfb_tia_rfe_value); + rssi = GetRSSI(); + if (rssi > rssi_value_50k) + ++cfb_tia_rfe_value; + else + { + --cfb_tia_rfe_value; + if (prevRSSIbigger) + return LIBLMS7_SUCCESS; //found correct value + } + prevRSSIbigger = rssi > rssi_value_50k; + } + return LIBLMS7_FAILURE; +} + +liblms7_status LMS7002M::RxLPFLow_Calibration(float_type RxLPFL_freq_MHz) +{ + liblms7_status status; + uint32_t rssi; + uint32_t rssi_value_50k; + int32_t c_ctl_lpfl_rbb; + bool prevRSSIbigger; + float_type cgenFreq_MHz = RxLPFL_freq_MHz * 20; + //RFE + Modify_SPI_Reg_bits(LMS7param(CFB_TIA_RFE), 15); + Modify_SPI_Reg_bits(LMS7param(CCOMP_TIA_RFE), 1); + Modify_SPI_Reg_bits(LMS7param(RCOMP_TIA_RFE), 15); + Modify_SPI_Reg_bits(LMS7param(G_TIA_RFE), 1); + + //RBB + c_ctl_lpfl_rbb = (int32_t)(2160 / RxLPFL_freq_MHz - 103); + if (c_ctl_lpfl_rbb < 0) + c_ctl_lpfl_rbb = 0; + if (c_ctl_lpfl_rbb > 2047) + c_ctl_lpfl_rbb = 2047; + Modify_SPI_Reg_bits(LMS7param(C_CTL_LPFL_RBB), c_ctl_lpfl_rbb); + + if (RxLPFL_freq_MHz >= 15) + Modify_SPI_Reg_bits(LMS7param(RCC_CTL_LPFL_RBB), 5); + else if (RxLPFL_freq_MHz >= 10) + Modify_SPI_Reg_bits(LMS7param(RCC_CTL_LPFL_RBB), 4); + else if (RxLPFL_freq_MHz >= 5) + Modify_SPI_Reg_bits(LMS7param(RCC_CTL_LPFL_RBB), 3); + else if (RxLPFL_freq_MHz >= 3) + Modify_SPI_Reg_bits(LMS7param(RCC_CTL_LPFL_RBB), 2); + else if (RxLPFL_freq_MHz >= 1.4) + Modify_SPI_Reg_bits(LMS7param(RCC_CTL_LPFL_RBB), 1); + else + Modify_SPI_Reg_bits(LMS7param(RCC_CTL_LPFL_RBB), 0); + + //CLKGEN + if (cgenFreq_MHz < 60) + cgenFreq_MHz = 60; + if (cgenFreq_MHz > 640) + cgenFreq_MHz = 640; + if (cgenFreq_MHz / 16 == RxLPFL_freq_MHz) + status = SetFrequencyCGEN(cgenFreq_MHz - 10); + else + status = SetFrequencyCGEN(cgenFreq_MHz); + if (status != LIBLMS7_SUCCESS) + return status; + + FilterTuning_AdjustGains(); + + rssi_value_50k = (uint32_t)( GetRSSI() * 0.707 ); + status = SetFrequencySX(Rx, GetFrequencySX_MHz(Tx, mRefClkSXT_MHz) - RxLPFL_freq_MHz, mRefClkSXR_MHz); + if (status != LIBLMS7_SUCCESS) + return status; + SetNCOFrequency(Rx, 0, GetFrequencySX_MHz(Tx, mRefClkSXT_MHz) - GetFrequencySX_MHz(Rx, mRefClkSXR_MHz) - 1); + + prevRSSIbigger = GetRSSI() > rssi_value_50k; + while (c_ctl_lpfl_rbb >= 0 && c_ctl_lpfl_rbb < 2048) + { + Modify_SPI_Reg_bits(LMS7param(C_CTL_LPFL_RBB), c_ctl_lpfl_rbb); + rssi = GetRSSI(); + if (rssi > rssi_value_50k) + ++c_ctl_lpfl_rbb; + else + { + --c_ctl_lpfl_rbb; + if (prevRSSIbigger) + return LIBLMS7_SUCCESS; //found correct value + } + prevRSSIbigger = rssi > rssi_value_50k; + } + return LIBLMS7_FAILURE; +} + +liblms7_status LMS7002M::RxLPFHigh_Calibration(float_type RxLPFH_freq_MHz) +{ + liblms7_status status; + int16_t c_ctl_lpfh_rbb; + int16_t rcc_ctl_lpfh_rbb; + float_type cgenFreq = RxLPFH_freq_MHz * 20; + uint32_t rssi; + uint32_t rssi_value_50k; + bool prevRSSIbigger; + //RFE + Modify_SPI_Reg_bits(LMS7param(CFB_TIA_RFE), 15); + Modify_SPI_Reg_bits(LMS7param(CCOMP_TIA_RFE), 1); + Modify_SPI_Reg_bits(LMS7param(RCOMP_TIA_RFE), 15); + Modify_SPI_Reg_bits(LMS7param(G_TIA_RFE), 1); + + //RBB + c_ctl_lpfh_rbb = (int16_t)(6000 / RxLPFH_freq_MHz - 50); + if (c_ctl_lpfh_rbb < 0) + c_ctl_lpfh_rbb = 0; + if (c_ctl_lpfh_rbb > 255) + c_ctl_lpfh_rbb = 255; + Modify_SPI_Reg_bits(LMS7param(C_CTL_LPFH_RBB), c_ctl_lpfh_rbb); + + rcc_ctl_lpfh_rbb = (int16_t)(RxLPFH_freq_MHz / 10 - 3); + if (rcc_ctl_lpfh_rbb < 0) + rcc_ctl_lpfh_rbb = 0; + Modify_SPI_Reg_bits(LMS7param(RCC_CTL_LPFH_RBB), rcc_ctl_lpfh_rbb); + + Modify_SPI_Reg_bits(LMS7param(INPUT_CTL_PGA_RBB), 1); + Modify_SPI_Reg_bits(LMS7param(PD_LPFL_RBB), 1); + Modify_SPI_Reg_bits(LMS7param(PD_LPFH_RBB), 0); + + //CLKGEN + if (cgenFreq < 60) + cgenFreq = 60; + if (cgenFreq > 640) + cgenFreq = 640; + if (cgenFreq / 16 == RxLPFH_freq_MHz) + status = SetFrequencyCGEN(cgenFreq - 10); + else + status = SetFrequencyCGEN(cgenFreq); + if (status != LIBLMS7_SUCCESS) + return status; + + FilterTuning_AdjustGains(); + + rssi_value_50k = (uint32_t)( GetRSSI() * 0.707); + status = SetFrequencySX(Rx, GetFrequencySX_MHz(Tx, mRefClkSXT_MHz) - RxLPFH_freq_MHz, mRefClkSXR_MHz); + if (status != LIBLMS7_SUCCESS) + return status; + SetNCOFrequency(Rx, 0, GetFrequencySX_MHz(Tx, mRefClkSXT_MHz) - GetFrequencySX_MHz(Rx, mRefClkSXR_MHz) - 1); + + prevRSSIbigger = GetRSSI() > rssi_value_50k; + while (c_ctl_lpfh_rbb >= 0 && c_ctl_lpfh_rbb < 256) + { + Modify_SPI_Reg_bits(LMS7param(C_CTL_LPFH_RBB), c_ctl_lpfh_rbb); + rssi = GetRSSI(); + if (rssi > rssi_value_50k) + ++c_ctl_lpfh_rbb; + else + { + --c_ctl_lpfh_rbb; + if (prevRSSIbigger) + return LIBLMS7_SUCCESS; //found correct value + } + prevRSSIbigger = rssi > rssi_value_50k; + } + return LIBLMS7_FAILURE; +} diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/LMS7002M_parameters.cpp b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/LMS7002M_parameters.cpp new file mode 100644 index 0000000000..b28887d776 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/LMS7002M_parameters.cpp @@ -0,0 +1,601 @@ +/** +@file LMS7002M_parameters.cpp +@author Lime Microsystems (www.limemicro.com) +@brief Definition of LMS7002M transceiver control parameters registers +*/ + +#include "LMS7002M_parameters.h" + +std::vector LMS7parameterList; + +const struct LMS7Parameter LRST_TX_B = { 0x0020, 15, 15, 1, "LRST_TX_B", "Resets all the logic registers to the default state for Tx MIMO channel B" }; +const struct LMS7Parameter MRST_TX_B = { 0x0020, 14, 14, 1, "MRST_TX_B", "Resets all the configuration memory to the default state for Tx MIMO channel B" }; +const struct LMS7Parameter LRST_TX_A = { 0x0020, 13, 13, 1, "LRST_TX_A", "Resets all the logic registers to the default state for Tx MIMO channel A" }; +const struct LMS7Parameter MRST_TX_A = { 0x0020, 12, 12, 1, "MRST_TX_A", "Resets all the configuration memory to the default state for Tx MIMO channel A" }; +const struct LMS7Parameter LRST_RX_B = { 0x0020, 11, 11, 1, "LRST_RX_B", "Resets all the logic registers to the default state for Rx MIMO channel B" }; +const struct LMS7Parameter MRST_RX_B = { 0x0020, 10, 10, 1, "MRST_RX_B", "Resets all the configuration memory to the default state for Rx MIMO channel B" }; +const struct LMS7Parameter LRST_RX_A = { 0x0020, 9, 9, 1, "LRST_RX_A", "Resets all the logic registers to the default state for Rx MIMO channel A" }; +const struct LMS7Parameter MRST_RX_A = { 0x0020, 8, 8, 1, "MRST_RX_A", "Resets all the configuration memory to the default state for Rx MIMO channel A" }; +const struct LMS7Parameter SRST_RXFIFO = { 0x0020, 7, 7, 1, "SRST_RXFIFO", "RX FIFO soft reset (LimeLight Interface)" }; +const struct LMS7Parameter SRST_TXFIFO = { 0x0020, 6, 6, 1, "SRST_TXFIFO", "TX FIFO soft reset (LimeLight Interface)" }; +const struct LMS7Parameter RXEN_B = { 0x0020, 5, 5, 1, "RXEN_B", "Power control for Rx MIMO channel B" }; +const struct LMS7Parameter RXEN_A = { 0x0020, 4, 4, 1, "RXEN_A", "Power control for Rx MIMO channel A" }; +const struct LMS7Parameter TXEN_B = { 0x0020, 3, 3, 1, "TXEN_B", "Power control for Tx MIMO channel B" }; +const struct LMS7Parameter TXEN_A = { 0x0020, 2, 2, 1, "TXEN_A", "Power control for Tx MIMO channel A" }; +const struct LMS7Parameter MAC = { 0x0020, 1, 0, 3, "MAC", "Selects MIMO channel for communication" }; +const struct LMS7Parameter TX_CLK_PE = { 0x0021, 11, 11, 1, "TX_CLK_PE", "Pull up control of TX_CLK pad" }; +const struct LMS7Parameter RX_CLK_PE = { 0x0021, 10, 10, 1, "RX_CLK_PE", "Pull up control of RX_CLK pad" }; +const struct LMS7Parameter SDA_PE = { 0x0021, 9, 9, 1, "SDA_PE", "Pull up control of SDA pad" }; +const struct LMS7Parameter SDA_DS = { 0x0021, 8, 8, 0, "SDA_DS", "Driver strength of SDA pad" }; +const struct LMS7Parameter SCL_PE = { 0x0021, 7, 7, 1, "SCL_PE", "Pull up control of SCL pad" }; +const struct LMS7Parameter SCL_DS = { 0x0021, 6, 6, 0, "SCL_DS", "Driver strength of SCL pad" }; +const struct LMS7Parameter SDIO_DS = { 0x0021, 5, 5, 0, "SDIO_DS", "Driver strength of SDIO pad" }; +const struct LMS7Parameter SDIO_PE = { 0x0021, 4, 4, 1, "SDIO_PE", "Pull up control of SDIO pad" }; +const struct LMS7Parameter SDO_PE = { 0x0021, 3, 3, 1, "SDO_PE", "Pull up control of SDO pad" }; +const struct LMS7Parameter SCLK_PE = { 0x0021, 2, 2, 1, "SCLK_PE", "Pull up control of SCLK pad" }; +const struct LMS7Parameter SEN_PE = { 0x0021, 1, 1, 1, "SEN_PE", "Pull up control of SEN pad" }; +const struct LMS7Parameter SPIMODE = { 0x0021, 0, 0, 1, "SPIMODE", "SPI communication mode" }; +const struct LMS7Parameter DIQ2_DS = { 0x0022, 11, 11, 0, "DIQ2_DS", "Driver strength of DIQ2 pad" }; +const struct LMS7Parameter DIQ2_PE = { 0x0022, 10, 10, 1, "DIQ2_PE", "Pull up control of DIQ2 pad" }; +const struct LMS7Parameter IQ_SEL_EN_2_PE = { 0x0022, 9, 9, 1, "IQ_SEL_EN_2_PE", "Pull up control of IQ_SEL_EN_2 pad" }; +const struct LMS7Parameter TXNRX2_PE = { 0x0022, 8, 8, 1, "TXNRX2_PE", "Pull up control of TXNRX2 pad" }; +const struct LMS7Parameter FCLK2_PE = { 0x0022, 7, 7, 1, "FCLK2_PE", "Pull up control of FCLK2 pad" }; +const struct LMS7Parameter MCLK2_PE = { 0x0022, 6, 6, 1, "MCLK2_PE", "Pull up control of MCLK2 pad" }; +const struct LMS7Parameter DIQ1_DS = { 0x0022, 5, 5, 0, "DIQ1_DS", "Pull up control of MCLK2 pad" }; +const struct LMS7Parameter DIQ1_PE = { 0x0022, 4, 4, 1, "DIQ1_PE", "Pull up control of DIQ1 pad" }; +const struct LMS7Parameter IQ_SEL_EN_1_PE = { 0x0022, 3, 3, 1, "IQ_SEL_EN_1_PE", "Pull up control of IQ_SEL_EN_1 pad" }; +const struct LMS7Parameter TXNRX1_PE = { 0x0022, 2, 2, 1, "TXNRX1_PE", "Pull up control of TXNRX1 pad" }; +const struct LMS7Parameter FCLK1_PE = { 0x0022, 1, 1, 1, "FCLK1_PE", "Pull up control of FCLK1 pad" }; +const struct LMS7Parameter MCLK1_PE = { 0x0022, 0, 0, 1, "MCLK1_PE", "Pull up control of MCLK1 pad" }; +const struct LMS7Parameter DIQDIRCTR2 = { 0x0023, 15, 15, 0, "DIQDIRCTR2", "DIQ2 direction control mode" }; +const struct LMS7Parameter DIQDIR2 = { 0x0023, 14, 14, 1, "DIQDIR2", "DIQ2 direction" }; +const struct LMS7Parameter DIQDIRCTR1 = { 0x0023, 13, 13, 0, "DIQDIRCTR1", "DIQ1 direction control mode" }; +const struct LMS7Parameter DIQDIR1 = { 0x0023, 12, 12, 1, "DIQDIR1", "DIQ1 direction" }; +const struct LMS7Parameter ENABLEDIRCTR2 = { 0x0023, 11, 11, 0, "ENABLEDIRCTR2", "ENABLE2 direction control mode" }; +const struct LMS7Parameter ENABLEDIR2 = { 0x0023, 10, 10, 1, "ENABLEDIR2", "ENABLE2 direction" }; +const struct LMS7Parameter ENABLEDIRCTR1 = { 0x0023, 9, 9, 0, "ENABLEDIRCTR1", "ENABLE1 direction control mode" }; +const struct LMS7Parameter ENABLEDIR1 = { 0x0023, 8, 8, 1, "ENABLEDIR1", "ENABLE1 direction." }; +const struct LMS7Parameter MOD_EN = { 0x0023, 6, 6, 1, "MOD_EN", "LimeLight interface enable" }; +const struct LMS7Parameter LML2_FIDM = { 0x0023, 5, 5, 0, "LML2_FIDM", "Frame start ID selection for Port 2 when LML_MODE2 = 0" }; +const struct LMS7Parameter LML2_TXNRXIQ = { 0x0023, 4, 4, 1, "LML2_TXNRXIQ", "TXIQ/RXIQ mode selection for Port 2 when LML_MODE2 = 0" }; +const struct LMS7Parameter LML2_MODE = { 0x0023, 3, 3, 1, "LML2_MODE", "Mode of LimeLight Port 2" }; +const struct LMS7Parameter LML1_FIDM = { 0x0023, 2, 2, 0, "LML1_FIDM", "Frame start ID selection for Port 1 when LML_MODE1 = 0" }; +const struct LMS7Parameter LML1_TXNRXIQ = { 0x0023, 1, 1, 0, "LML1_TXNRXIQ", "TXIQ/RXIQ mode selection for Port 1 when LML_MODE1 = 0" }; +const struct LMS7Parameter LML1_MODE = { 0x0023, 0, 0, 1, "LML1_MODE", "Mode of LimeLight Port 1" }; +const struct LMS7Parameter LML1_S3S = { 0x0024, 15, 14, 3, "LML1_S3S", "Sample source in position 3, when Port 1 is RF2BB" }; +const struct LMS7Parameter LML1_S2S = { 0x0024, 13, 12, 2, "LML1_S2S", "Sample source in position 2, when Port 1 is RF2BB" }; +const struct LMS7Parameter LML1_S1S = { 0x0024, 11, 10, 1, "LML1_S1S", "Sample source in position 1, when Port 1 is RF2BB" }; +const struct LMS7Parameter LML1_S0S = { 0x0024, 9, 8, 0, "LML1_S0S", "Sample source in position 0, when Port 1 is RF2BB" }; +const struct LMS7Parameter LML1_BQP = { 0x0024, 7, 6, 3, "LML1_BQP", "BQ sample position in frame, when Port 1 is BB2RF" }; +const struct LMS7Parameter LML1_BIP = { 0x0024, 5, 4, 2, "LML1_BIP", "BI sample position in frame, when Port 1 is BB2RF" }; +const struct LMS7Parameter LML1_AQP = { 0x0024, 3, 2, 1, "LML1_AQP", "AQ sample position in frame, when Port 1 is BB2RF" }; +const struct LMS7Parameter LML1_AIP = { 0x0024, 1, 0, 0, "LML1_AIP", "AI sample position in frame, when Port 1 is BB2RF" }; +const struct LMS7Parameter LML1_BB2RF_PST = { 0x0025, 15, 8, 1, "LML1_BB2RF_PST", "Number of clock cycles to wait before data drive stop after burst stop is detected in JESD207 mode on Port 1 and Port 1 BB2RF" }; +const struct LMS7Parameter LML1_BB2RF_PRE = { 0x0025, 7, 0, 1, "LML1_BB2RF_PRE", "Number of clock cycles to wait before data drive start after burst start is detected in JESD207 mode on Port 1 and Port 1 BB2RF" }; +const struct LMS7Parameter LML1_RF2BB_PST = { 0x0026, 15, 8, 1, "LML1_RF2BB_PST", "Number of clock cycles to wait before data capture stop after burst stop is detected in JESD207 mode on Port 1 and Port 1 is RF2BB" }; +const struct LMS7Parameter LML1_RF2BB_PRE = { 0x0026, 7, 0, 1, "LML1_RF2BB_PRE", "Number of clock cycles to wait before data capture start after burst start is detected in JESD207 mode on Port 1 and Port 1 RF2BB" }; +const struct LMS7Parameter LML2_S3S = { 0x0027, 15, 14, 3, "LML2_S3S", "Sample source in position 3, when Port 2 is RF2BB" }; +const struct LMS7Parameter LML2_S2S = { 0x0027, 13, 12, 2, "LML2_S2S", "Sample source in position 2, when Port 2 is RF2BB" }; +const struct LMS7Parameter LML2_S1S = { 0x0027, 11, 10, 1, "LML2_S1S", "Sample source in position 1, when Port 2 is RF2BB" }; +const struct LMS7Parameter LML2_S0S = { 0x0027, 9, 8, 0, "LML2_S0S", "Sample source in position 0, when Port 2 is RF2BB" }; +const struct LMS7Parameter LML2_BQP = { 0x0027, 7, 6, 3, "LML2_BQP", "BQ sample position in frame, when Port 2 is BB2RF" }; +const struct LMS7Parameter LML2_BIP = { 0x0027, 5, 4, 2, "LML2_BIP", "BI sample position in frame, when Port 2 is BB2RF" }; +const struct LMS7Parameter LML2_AQP = { 0x0027, 3, 2, 1, "LML2_AQP", "AQ sample position in frame, when Port 2 is BB2RF" }; +const struct LMS7Parameter LML2_AIP = { 0x0027, 1, 0, 0, "LML2_AIP", "AI sample position in frame, when Port 2 is BB2RF" }; +const struct LMS7Parameter LML2_BB2RF_PST = { 0x0028, 15, 8, 1, "LML2_BB2RF_PST", "Number of clock cycles to wait before data drive stop after burst stop is detected in JESD207 mode on Port 2 and Port 2 BB2RF" }; +const struct LMS7Parameter LML2_BB2RF_PRE = { 0x0028, 7, 0, 1, "LML2_BB2RF_PRE", "Number of clock cycles to wait before data drive start after burst start is detected in JESD207 mode on Port 2 and Port 2 BB2RF" }; +const struct LMS7Parameter LML2_RF2BB_PST = { 0x0029, 15, 8, 1, "LML2_RF2BB_PST", "Number of clock cycles to wait before data capture stop after burst stop is detected in JESD207 mode on Port 2 and Port 2 RF2BB" }; +const struct LMS7Parameter LML2_RF2BB_PRE = { 0x0029, 7, 0, 1, "LML2_RF2BB_PRE", "Number of clock cycles to wait before data capture start after burst start is detected in JESD207 mode on Port 2 and Port 2 RF2BB" }; +const struct LMS7Parameter FCLK2_DLY = { 0x002A, 15, 14, 0, "FCLK2_DLY", "" }; +const struct LMS7Parameter FCLK1_DLY = { 0x002A, 13, 12, 0, "FCLK1_DLY", "" }; +const struct LMS7Parameter RX_MUX = { 0x002A, 11, 10, 0, "RX_MUX", "RxFIFO data source selection" }; +const struct LMS7Parameter TX_MUX = { 0x002A, 9, 8, 0, "TX_MUX", "Port selection for data transmit to TSP" }; +const struct LMS7Parameter TXRDCLK_MUX = { 0x002A, 7, 6, 2, "TXRDCLK_MUX", "TX FIFO read clock selection" }; +const struct LMS7Parameter TXWRCLK_MUX = { 0x002A, 5, 4, 0, "TXWRCLK_MUX", "TX FIFO write clock selection" }; +const struct LMS7Parameter RXRDCLK_MUX = { 0x002A, 3, 2, 1, "RXRDCLK_MUX", "RX FIFO read clock selection" }; +const struct LMS7Parameter RXWRCLK_MUX = { 0x002A, 1, 0, 2, "RXWRCLK_MUX", "RX FIFO write clock selection" }; +const struct LMS7Parameter FCLK2_INV = { 0x002B, 15, 15, 0, "FCLK2_INV", "FCLK2 clock inversion" }; +const struct LMS7Parameter FCLK1_INV = { 0x002B, 14, 14, 0, "FCLK1_INV", "FCLK1 clock inversion" }; +const struct LMS7Parameter MCLK2DLY = { 0x002B, 13, 12, 0, "MCLK2DLY", "MCLK2 clock internal delay" }; +const struct LMS7Parameter MCLK1DLY = { 0x002B, 11, 10, 0, "MCLK1DLY", "MCLK1 clock internal delay" }; +const struct LMS7Parameter MCLK2SRC = { 0x002B, 5, 4, 1, "MCLK2SRC", "MCLK2 clock source" }; +const struct LMS7Parameter MCLK1SRC = { 0x002B, 3, 2, 0, "MCLK1SRC", "MCLK1 clock source" }; +const struct LMS7Parameter TXDIVEN = { 0x002B, 1, 1, 0, "TXDIVEN", "TX clock divider enable" }; +const struct LMS7Parameter RXDIVEN = { 0x002B, 0, 0, 0, "RXDIVEN", "RX clock divider enable" }; +const struct LMS7Parameter TXTSPCLKA_DIV = { 0x002C, 15, 8, 255, "TXTSPCLKA_DIV", "TxTSP clock divider, used to produce MCLK(1/2). Clock division ratio is 2(TXTSPCLKA_DIV + 1)"}; +const struct LMS7Parameter RXTSPCLKA_DIV = { 0x002C, 7, 0, 255, "RXTSPCLKA_DIV", "RxTSP clock divider, used to produce MCLK(1/2). Clock division ratio is 2(RXTSPCLKA_DIV + 1)"}; +const struct LMS7Parameter MIMO_SISO = { 0x002E, 15, 15, 0, "MIMO_SISO", "MIMO channel B enable control" }; +const struct LMS7Parameter VER = { 0x002F, 15, 11, 7, "VER", "" }; +const struct LMS7Parameter REV = { 0x002F, 10, 6, 1, "REV", "" }; +const struct LMS7Parameter MASK = { 0x002F, 5, 0, 0, "MASK", "" }; +const struct LMS7Parameter EN_DIR_LDO = { 0x0081, 3, 3, 0, "EN_DIR_LDO", "" }; +const struct LMS7Parameter EN_DIR_CGEN = { 0x0081, 2, 2, 0, "EN_DIR_CGEN", "" }; +const struct LMS7Parameter EN_DIR_XBUF = { 0x0081, 1, 1, 0, "EN_DIR_XBUF", "" }; +const struct LMS7Parameter EN_DIR_AFE = { 0x0081, 0, 0, 0, "EN_DIR_AFE", "" }; +const struct LMS7Parameter ISEL_DAC_AFE = { 0x0082, 15, 13, 4, "ISEL_DAC_AFE", "Controls the peak current of the DAC output current" }; +const struct LMS7Parameter MODE_INTERLEAVE_AFE = { 0x0082, 12, 12, 0, "MODE_INTERLEAVE_AFE", "time interleaves the two ADCs into one ADC" }; +const struct LMS7Parameter MUX_AFE_1 = { 0x0082, 11, 10, 0, "MUX_AFE_1", "Controls the MUX at the input of the ADC channel 1" }; +const struct LMS7Parameter MUX_AFE_2 = { 0x0082, 9, 8, 0, "MUX_AFE_2", "Controls the MUX at the input of the ADC channel 2" }; +const struct LMS7Parameter PD_AFE = { 0x0082, 5, 5, 0, "PD_AFE", "Power down control for the AFE current mirror in BIAS_TOP" }; +const struct LMS7Parameter PD_RX_AFE1 = { 0x0082, 4, 4, 0, "PD_RX_AFE1", "Power down control for the ADC of channel 1" }; +const struct LMS7Parameter PD_RX_AFE2 = { 0x0082, 3, 3, 1, "PD_RX_AFE2", "Power down control for the ADC of channel 2" }; +const struct LMS7Parameter PD_TX_AFE1 = { 0x0082, 2, 2, 0, "PD_TX_AFE1", "Power down control for the DAC of channel 1" }; +const struct LMS7Parameter PD_TX_AFE2 = { 0x0082, 1, 1, 1, "PD_TX_AFE2", "Power down control for the DAC of channel 2" }; +const struct LMS7Parameter EN_G_AFE = { 0x0082, 0, 0, 1, "EN_G_AFE", "Enable control for all the AFE power downs" }; +const struct LMS7Parameter MUX_BIAS_OUT = { 0x0084, 12, 11, 0, "MUX_BIAS_OUT", "Test mode of the BIAS_TOP" }; +const struct LMS7Parameter RP_CALIB_BIAS = { 0x0084, 10, 6, 16, "RP_CALIB_BIAS", "Calibration code for rppolywo. This code is set by the calibration algorithm: BIAS_RPPOLY_calibration" }; +const struct LMS7Parameter PD_FRP_BIAS = { 0x0084, 4, 4, 0, "PD_FRP_BIAS", "Power down signal for Fix/RP block" }; +const struct LMS7Parameter PD_F_BIAS = { 0x0084, 3, 3, 0, "PD_F_BIAS", "Power down signal for Fix" }; +const struct LMS7Parameter PD_PTRP_BIAS = { 0x0084, 2, 2, 0, "PD_PTRP_BIAS", "Power down signal for PTAT/RP block" }; +const struct LMS7Parameter PD_PT_BIAS = { 0x0084, 1, 1, 0, "PD_PT_BIAS", "Power down signal for PTAT block" }; +const struct LMS7Parameter PD_BIAS_MASTER = { 0x0084, 0, 0, 0, "PD_BIAS_MASTER", "Enable signal for central bias block" }; +const struct LMS7Parameter SLFB_XBUF_RX = { 0x0085, 8, 8, 0, "SLFB_XBUF_RX", "Self biasing digital contol SLFB_XBUF_RX" }; +const struct LMS7Parameter SLFB_XBUF_TX = { 0x0085, 7, 7, 0, "SLFB_XBUF_TX", "Self biasing digital contol SLFB_XBUF_TX" }; +const struct LMS7Parameter BYP_XBUF_RX = { 0x0085, 6, 6, 0, "BYP_XBUF_RX", "Shorts the Input 3.3V buffer in XBUF" }; +const struct LMS7Parameter BYP_XBUF_TX = { 0x0085, 5, 5, 0, "BYP_XBUF_TX", "Shorts the Input 3.3V buffer in XBUF" }; +const struct LMS7Parameter EN_OUT2_XBUF_TX = { 0x0085, 4, 4, 0, "EN_OUT2_XBUF_TX", "Enables the 2nd output of TX XBUF. This 2nd buffer goes to XBUF_RX. This should be active when only 1 XBUF is to be used" }; +const struct LMS7Parameter EN_TBUFIN_XBUF_RX = { 0x0085, 3, 3, 0, "EN_TBUFIN_XBUF_RX", "Disables the input from the external XOSC and buffers the 2nd input signal (from TX XBUF 2nd output) to the RX. This should be active when only 1 XBUF is to be used" }; +const struct LMS7Parameter PD_XBUF_RX = { 0x0085, 2, 2, 0, "PD_XBUF_RX", "Power down signal PD_XBUF_RX" }; +const struct LMS7Parameter PD_XBUF_TX = { 0x0085, 1, 1, 0, "PD_XBUF_TX", "Power down signal PD_XBUF_TX" }; +const struct LMS7Parameter EN_G_XBUF = { 0x0085, 0, 0, 1, "EN_G_XBUF", "Enable control for all the XBUF power downs" }; +const struct LMS7Parameter SPDUP_VCO_CGEN = { 0x0086, 15, 15, 0, "SPDUP_VCO_CGEN", "Bypasses the noise filter resistor for fast setlling time. It should be connected to a 1us pulse" }; +const struct LMS7Parameter RESET_N_CGEN = { 0x0086, 14, 14, 1, "RESET_N_CGEN", "A pulse should be used in the start-up to reset ( 1-normal operation)" }; +const struct LMS7Parameter EN_ADCCLKH_CLKGN = { 0x0086, 11, 11, 1, "EN_ADCCLKH_CLKGN", "Selects if F_CLKH or F_CLKL is connected to FCLK_ADC" }; +const struct LMS7Parameter EN_COARSE_CKLGEN = { 0x0086, 10, 10, 0, "EN_COARSE_CKLGEN", "Enable signal for coarse tuning block" }; +const struct LMS7Parameter EN_INTONLY_SDM_CGEN = { 0x0086, 9, 9, 0, "EN_INTONLY_SDM_CGEN", "Enables INTEGER-N mode of the SX " }; +const struct LMS7Parameter EN_SDM_CLK_CGEN = { 0x0086, 8, 8, 1, "EN_SDM_CLK_CGEN", "Enables/Disables SDM clock. In INT-N mode or for noise testing, SDM clock can be disabled" }; +const struct LMS7Parameter PD_CP_CGEN = { 0x0086, 6, 6, 0, "PD_CP_CGEN", "Power down for Charge Pump" }; +const struct LMS7Parameter PD_FDIV_FB_CGEN = { 0x0086, 5, 5, 0, "PD_FDIV_FB_CGEN", "Power down for feedback frequency divider" }; +const struct LMS7Parameter PD_FDIV_O_CGEN = { 0x0086, 4, 4, 0, "PD_FDIV_O_CGEN", "Power down for forward frequency divider of the CGEN block" }; +const struct LMS7Parameter PD_SDM_CGEN = { 0x0086, 3, 3, 0, "PD_SDM_CGEN", "Power down for SDM" }; +const struct LMS7Parameter PD_VCO_CGEN = { 0x0086, 2, 2, 0, "PD_VCO_CGEN", "Power down for VCO" }; +const struct LMS7Parameter PD_VCO_COMP_CGEN = { 0x0086, 1, 1, 0, "PD_VCO_COMP_CGEN", "Power down for VCO comparator" }; +const struct LMS7Parameter EN_G_CGEN = { 0x0086, 0, 0, 1, "EN_G_CGEN", "Enable control for all the CGEN power downs" }; +const struct LMS7Parameter FRAC_SDM_CGEN_LSB = { 0x0087, 15, 0, 0x0400, "FRAC_SDM_CGEN_LSB", "" }; +const struct LMS7Parameter INT_SDM_CGEN = { 0x0088, 13, 4, 120, "INT_SDM_CGEN", "" }; +const struct LMS7Parameter FRAC_SDM_CGEN_MSB = { 0x0088, 3, 0, 0, "FRAC_SDM_CGEN_MSB", "" }; +const struct LMS7Parameter REV_SDMCLK_CGEN = { 0x0089, 15, 15, 0, "REV_SDMCLK_CGEN", "Reverses the SDM clock" }; +const struct LMS7Parameter SEL_SDMCLK_CGEN = { 0x0089, 14, 14, 0, "SEL_SDMCLK_CGEN", "Selects between the feedback divider output and Fref for SDM" }; +const struct LMS7Parameter SX_DITHER_EN_CGEN = { 0x0089, 13, 13, 0, "SX_DITHER_EN_CGEN", "Enabled dithering in SDM" }; +const struct LMS7Parameter CLKH_OV_CLKL_CGEN = { 0x0089, 12, 11, 0, "CLKH_OV_CLKL_CGEN", "FCLKL here is ADC clock. FCLKH is the clock to the DAC and if no division is added to the ADC as well" }; +const struct LMS7Parameter DIV_OUTCH_CGEN = { 0x0089, 10, 3, 4, "DIV_OUTCH_CGEN", "" }; +const struct LMS7Parameter TST_CGEN = { 0x0089, 2, 0, 0, "TST_CGEN", +"Controls the test mode of the SX\n\ +0 - TST disabled; RSSI analog outputs enabled if RSSI blocks active and when all PLL test signals are off\n\ +1 - tstdo[0] = ADC clock; tstdo[1] = DAC clock; tstao = High impedance;\n\ +2 - tstdo[0] = SDM clock; tstdo[1] = feedback divider output; tstao = VCO tune through a 60kOhm resistor;\n\ +3 - tstdo[0] = Reference clock; tstdo[1] = feedback divider output; tstao = VCO tune through a 10kOhm resistor;\n\ +4 - tstdo[0] = High impedance; tstdo[1] = High impedance; tstao = High impedance;\n\ +5 - tstdo[0] = Charge pump Down signal; tstdo[1] = Charge pump Up signal; tstao = High impedance;\n\ +6 - tstdo[0] = High impedance; tstdo[1] = High impedance; tstao = VCO tune through a 60kOhm resistor;\n\ +7 - tstdo[0] = High impedance; tstdo[1] = High impedance; tstao = VCO tune through a 10kOhm resistor;\n\ +if TST_SX[2] = 1 --> VCO_TSTBUF active generating VCO_TST_DIV20 and VCO_TST_DIV40"}; +const struct LMS7Parameter REV_CLKDAC_CGEN = { 0x008A, 14, 14, 0, "REV_CLKDAC_CGEN", "Inverts the clock F_CLKL" }; +const struct LMS7Parameter CMPLO_CTRL_CGEN = { 0x008A, 27, 14, 0, "CMPLO_CTRL_CGEN", "" }; +const struct LMS7Parameter REV_CLKADC_CGEN = { 0x008A, 13, 13, 0, "REV_CLKADC_CGEN", "Inverts the clock F_CLKL" }; +const struct LMS7Parameter REVPH_PFD_CGEN = { 0x008A, 12, 12, 0, "REVPH_PFD_CGEN", "Reverse the pulses of PFD. It can be used to reverse the polarity of the PLL loop (positive feedback to negative feedback)" }; +const struct LMS7Parameter IOFFSET_CP_CGEN = { 0x008A, 11, 6, 20, "IOFFSET_CP_CGEN", "Scales the offset current of the charge pump, 0-->63. This current is used in Fran-N mode to create an offset in the CP response and avoide the non-linear section" }; +const struct LMS7Parameter IPULSE_CP_CGEN = { 0x008A, 5, 0, 20, "IPULSE_CP_CGEN", "Scales the pulse current of the charge pump" }; +const struct LMS7Parameter ICT_VCO_CGEN = { 0x008B, 13, 9, 16, "ICT_VCO_CGEN", "Scales the VCO bias current from 0 to 2.5xInom" }; +const struct LMS7Parameter CSW_VCO_CGEN = { 0x008B, 8, 1, 128, "CSW_VCO_CGEN", "" }; +const struct LMS7Parameter COARSE_START_CGEN = { 0x008B, 0, 0, 0, "COARSE_START_CGEN", "Control signal for coarse tuning algorithm (SX_SWC_calibration)" }; +const struct LMS7Parameter COARSE_STEPDONE_CGEN = { 0x008C, 15, 15, 0, "COARSE_STEPDONE_CGEN", "" }; +const struct LMS7Parameter COARSEPLL_COMPO_CGEN = { 0x008C, 14, 14, 0, "COARSEPLL_COMPO_CGEN", "" }; +const struct LMS7Parameter VCO_CMPHO_CGEN = { 0x008C, 13, 13, 0, "VCO_CMPHO_CGEN", "" }; +const struct LMS7Parameter VCO_CMPLO_CGEN = { 0x008C, 12, 12, 0, "VCO_CMPLO_CGEN", "" }; +const struct LMS7Parameter CP2_CGEN = { 0x008C, 11, 8, 6, "CP2_CGEN", "Controls the value of CP2 (cap from CP output to GND) in the PLL filter" }; +const struct LMS7Parameter CP3_CGEN = { 0x008C, 7, 4, 7, "CP3_CGEN", "Controls the value of CP3 (cap from VCO Vtune input to GND) in the PLL filter" }; +const struct LMS7Parameter CZ_CGEN = { 0x008C, 3, 0, 11, "CZ_CGEN", "Controls the value of CZ (Zero capacitor) in the PLL filter" }; +const struct LMS7Parameter EN_LDO_DIG = { 0x0092, 15, 15, 0, "EN_LDO_DIG", "Enables the LDO" }; +const struct LMS7Parameter EN_LDO_DIGGN = { 0x0092, 14, 14, 0, "EN_LDO_DIGGN", "Enables the LDO" }; +const struct LMS7Parameter EN_LDO_DIGSXR = { 0x0092, 13, 13, 0, "EN_LDO_DIGSXR", "Enables the LDO" }; +const struct LMS7Parameter EN_LDO_DIGSXT = { 0x0092, 12, 12, 0, "EN_LDO_DIGSXT", "Enables the LDO" }; +const struct LMS7Parameter EN_LDO_DIVGN = { 0x0092, 11, 11, 0, "EN_LDO_DIVGN", "Enables the LDO" }; +const struct LMS7Parameter EN_LDO_DIVSXR = { 0x0092, 10, 10, 0, "EN_LDO_DIVSXR", "Enables the LDO" }; +const struct LMS7Parameter EN_LDO_DIVSXT = { 0x0092, 9, 9, 0, "EN_LDO_DIVSXT", "Enables the LDO" }; +const struct LMS7Parameter EN_LDO_LNA12 = { 0x0092, 8, 8, 0, "EN_LDO_LNA12", "Enables the LDO" }; +const struct LMS7Parameter EN_LDO_LNA14 = { 0x0092, 7, 7, 0, "EN_LDO_LNA14", "Enables the LDO" }; +const struct LMS7Parameter EN_LDO_MXRFE = { 0x0092, 6, 6, 0, "EN_LDO_MXRFE", "Enables the LDO" }; +const struct LMS7Parameter EN_LDO_RBB = { 0x0092, 5, 5, 0, "EN_LDO_RBB", "Enables the LDO" }; +const struct LMS7Parameter EN_LDO_RXBUF = { 0x0092, 4, 4, 0, "EN_LDO_RXBUF", "Enables the LDO" }; +const struct LMS7Parameter EN_LDO_TBB = { 0x0092, 3, 3, 0, "EN_LDO_TBB", "Enables the LDO" }; +const struct LMS7Parameter EN_LDO_TIA12 = { 0x0092, 2, 2, 0, "EN_LDO_TIA12", "Enables the LDO" }; +const struct LMS7Parameter EN_LDO_TIA14 = { 0x0092, 1, 1, 0, "EN_LDO_TIA14", "Enables the LDO" }; +const struct LMS7Parameter EN_G_LDO = { 0x0092, 0, 0, 1, "EN_G_LDO", "Enable control for all the LDO power downs" }; +const struct LMS7Parameter EN_LOADIMP_LDO_TLOB = { 0x0093, 15, 15, 0, "EN_LOADIMP_LDO_TLOB", "Enables the load dependent bias to optimize the load regulation" }; +const struct LMS7Parameter EN_LOADIMP_LDO_TPAD = { 0x0093, 14, 14, 0, "EN_LOADIMP_LDO_TPAD", "Enables the load dependent bias to optimize the load regulation" }; +const struct LMS7Parameter EN_LOADIMP_LDO_TXBUF = { 0x0093, 13, 13, 0, "EN_LOADIMP_LDO_TXBUF", "Enables the load dependent bias to optimize the load regulation" }; +const struct LMS7Parameter EN_LOADIMP_LDO_VCOGN = { 0x0093, 12, 12, 0, "EN_LOADIMP_LDO_VCOGN", "Enables the load dependent bias to optimize the load regulation" }; +const struct LMS7Parameter EN_LOADIMP_LDO_VCOSXR = { 0x0093, 11, 11, 0, "EN_LOADIMP_LDO_VCOSXR", "Enables the load dependent bias to optimize the load regulation" }; +const struct LMS7Parameter EN_LOADIMP_LDO_VCOSXT = { 0x0093, 10, 10, 0, "EN_LOADIMP_LDO_VCOSXT", "Enables the load dependent bias to optimize the load regulation" }; +const struct LMS7Parameter EN_LDO_AFE = { 0x0093, 9, 9, 0, "EN_LDO_AFE", "Enables the LDO" }; +const struct LMS7Parameter EN_LDO_CPGN = { 0x0093, 8, 8, 0, "EN_LDO_CPGN", "Enables the LDO" }; +const struct LMS7Parameter EN_LDO_CPSXR = { 0x0093, 7, 7, 0, "EN_LDO_CPSXR", "Enables the LDO" }; +const struct LMS7Parameter EN_LDO_TLOB = { 0x0093, 6, 6, 0, "EN_LDO_TLOB", "Enables the LDO" }; +const struct LMS7Parameter EN_LDO_TPAD = { 0x0093, 5, 5, 0, "EN_LDO_TPAD", "Enables the LDO" }; +const struct LMS7Parameter EN_LDO_TXBUF = { 0x0093, 4, 4, 0, "EN_LDO_TXBUF", "Enables the LDO" }; +const struct LMS7Parameter EN_LDO_VCOGN = { 0x0093, 3, 3, 0, "EN_LDO_VCOGN", "Enables the LDO" }; +const struct LMS7Parameter EN_LDO_VCOSXR = { 0x0093, 2, 2, 0, "EN_LDO_VCOSXR", "Enables the LDO" }; +const struct LMS7Parameter EN_LDO_VCOSXT = { 0x0093, 1, 1, 0, "EN_LDO_VCOSXT", "Enables the LDO" }; +const struct LMS7Parameter EN_LDO_CPSXT = { 0x0093, 0, 0, 0, "EN_LDO_CPSXT", "Enables the LDO" }; +const struct LMS7Parameter EN_LOADIMP_LDO_CPSXT = { 0x0094, 15, 15, 0, "EN_LOADIMP_LDO_CPSXT", "Enables the load dependent bias to optimize the load regulation" }; +const struct LMS7Parameter EN_LOADIMP_LDO_DIG = { 0x0094, 14, 14, 0, "EN_LOADIMP_LDO_DIG", "Enables the load dependent bias to optimize the load regulation" }; +const struct LMS7Parameter EN_LOADIMP_LDO_DIGGN = { 0x0094, 13, 13, 0, "EN_LOADIMP_LDO_DIGGN", "Enables the load dependent bias to optimize the load regulation" }; +const struct LMS7Parameter EN_LOADIMP_LDO_DIGSXR = { 0x0094, 12, 12, 0, "EN_LOADIMP_LDO_DIGSXR", "Enables the load dependent bias to optimize the load regulation" }; +const struct LMS7Parameter EN_LOADIMP_LDO_DIGSXT = { 0x0094, 11, 11, 0, "EN_LOADIMP_LDO_DIGSXT", "Enables the load dependent bias to optimize the load regulation" }; +const struct LMS7Parameter EN_LOADIMP_LDO_DIVGN = { 0x0094, 10, 10, 0, "EN_LOADIMP_LDO_DIVGN", "Enables the load dependent bias to optimize the load regulation" }; +const struct LMS7Parameter EN_LOADIMP_LDO_DIVSXR = { 0x0094, 9, 9, 0, "EN_LOADIMP_LDO_DIVSXR", "Enables the load dependent bias to optimize the load regulation" }; +const struct LMS7Parameter EN_LOADIMP_LDO_DIVSXT = { 0x0094, 8, 8, 0, "EN_LOADIMP_LDO_DIVSXT", "Enables the load dependent bias to optimize the load regulation" }; +const struct LMS7Parameter EN_LOADIMP_LDO_LNA12 = { 0x0094, 7, 7, 0, "EN_LOADIMP_LDO_LNA12", "Enables the load dependent bias to optimize the load regulation" }; +const struct LMS7Parameter EN_LOADIMP_LDO_LNA14 = { 0x0094, 6, 6, 0, "EN_LOADIMP_LDO_LNA14", "Enables the load dependent bias to optimize the load regulation" }; +const struct LMS7Parameter EN_LOADIMP_LDO_MXRFE = { 0x0094, 5, 5, 0, "EN_LOADIMP_LDO_MXRFE", "Enables the load dependent bias to optimize the load regulation" }; +const struct LMS7Parameter EN_LOADIMP_LDO_RBB = { 0x0094, 4, 4, 0, "EN_LOADIMP_LDO_RBB", "Enables the load dependent bias to optimize the load regulation" }; +const struct LMS7Parameter EN_LOADIMP_LDO_RXBUF = { 0x0094, 3, 3, 0, "EN_LOADIMP_LDO_RXBUF", "Enables the load dependent bias to optimize the load regulation" }; +const struct LMS7Parameter EN_LOADIMP_LDO_TBB = { 0x0094, 2, 2, 0, "EN_LOADIMP_LDO_TBB", "Enables the load dependent bias to optimize the load regulation" }; +const struct LMS7Parameter EN_LOADIMP_LDO_TIA12 = { 0x0094, 1, 1, 0, "EN_LOADIMP_LDO_TIA12", "Enables the load dependent bias to optimize the load regulation" }; +const struct LMS7Parameter EN_LOADIMP_LDO_TIA14 = { 0x0094, 0, 0, 0, "EN_LOADIMP_LDO_TIA14", "Enables the load dependent bias to optimize the load regulation" }; +const struct LMS7Parameter BYP_LDO_TBB = { 0x0095, 15, 15, 0, "BYP_LDO_TBB", "Bypass signal for the LDO" }; +const struct LMS7Parameter BYP_LDO_TIA12 = { 0x0095, 14, 14, 0, "BYP_LDO_TIA12", "Bypass signal for the LDO" }; +const struct LMS7Parameter BYP_LDO_TIA14 = { 0x0095, 13, 13, 0, "BYP_LDO_TIA14", "Bypass signal for the LDO" }; +const struct LMS7Parameter BYP_LDO_TLOB = { 0x0095, 12, 12, 0, "BYP_LDO_TLOB", "Bypass signal for the LDO" }; +const struct LMS7Parameter BYP_LDO_TPAD = { 0x0095, 11, 11, 0, "BYP_LDO_TPAD", "Bypass signal for the LDO" }; +const struct LMS7Parameter BYP_LDO_TXBUF = { 0x0095, 10, 10, 0, "BYP_LDO_TXBUF", "Bypass signal for the LDO" }; +const struct LMS7Parameter BYP_LDO_VCOGN = { 0x0095, 9, 9, 0, "BYP_LDO_VCOGN", "Bypass signal for the LDO" }; +const struct LMS7Parameter BYP_LDO_VCOSXR = { 0x0095, 8, 8, 0, "BYP_LDO_VCOSXR", "Bypass signal for the LDO" }; +const struct LMS7Parameter BYP_LDO_VCOSXT = { 0x0095, 7, 7, 0, "BYP_LDO_VCOSXT", "Bypass signal for the LDO" }; +const struct LMS7Parameter EN_LOADIMP_LDO_AFE = { 0x0095, 2, 2, 0, "EN_LOADIMP_LDO_AFE", "Enables the load dependent bias to optimize the load regulation" }; +const struct LMS7Parameter EN_LOADIMP_LDO_CPGN = { 0x0095, 1, 1, 0, "EN_LOADIMP_LDO_CPGN", "Enables the load dependent bias to optimize the load regulation" }; +const struct LMS7Parameter EN_LOADIMP_LDO_CPSXR = { 0x0095, 0, 0, 0, "EN_LOADIMP_LDO_CPSXR", "Enables the load dependent bias to optimize the load regulation" }; +const struct LMS7Parameter BYP_LDO_AFE = { 0x0096, 15, 15, 0, "BYP_LDO_AFE", "Bypass signal for the LDO" }; +const struct LMS7Parameter BYP_LDO_CPGN = { 0x0096, 14, 14, 0, "BYP_LDO_CPGN", "Bypass signal for the LDO" }; +const struct LMS7Parameter BYP_LDO_CPSXR = { 0x0096, 13, 13, 0, "BYP_LDO_CPSXR", "Bypass signal for the LDO" }; +const struct LMS7Parameter BYP_LDO_CPSXT = { 0x0096, 12, 12, 0, "BYP_LDO_CPSXT", "Bypass signal for the LDO" }; +const struct LMS7Parameter BYP_LDO_DIG = { 0x0096, 11, 11, 0, "BYP_LDO_DIG", "Bypass signal for the LDO" }; +const struct LMS7Parameter BYP_LDO_DIGGN = { 0x0096, 10, 10, 0, "BYP_LDO_DIGGN", "Bypass signal for the LDO" }; +const struct LMS7Parameter BYP_LDO_DIGSXR = { 0x0096, 9, 9, 0, "BYP_LDO_DIGSXR", "Bypass signal for the LDO" }; +const struct LMS7Parameter BYP_LDO_DIGSXT = { 0x0096, 8, 8, 0, "BYP_LDO_DIGSXT", "Bypass signal for the LDO" }; +const struct LMS7Parameter BYP_LDO_DIVGN = { 0x0096, 7, 7, 0, "BYP_LDO_DIVGN", "Bypass signal for the LDO" }; +const struct LMS7Parameter BYP_LDO_DIVSXR = { 0x0096, 6, 6, 0, "BYP_LDO_DIVSXR", "Bypass signal for the LDO" }; +const struct LMS7Parameter BYP_LDO_DIVSXT = { 0x0096, 5, 5, 0, "BYP_LDO_DIVSXT", "Bypass signal for the LDO" }; +const struct LMS7Parameter BYP_LDO_LNA12 = { 0x0096, 4, 4, 0, "BYP_LDO_LNA12", "Bypass signal for the LDO" }; +const struct LMS7Parameter BYP_LDO_LNA14 = { 0x0096, 3, 3, 0, "BYP_LDO_LNA14", "Bypass signal for the LDO" }; +const struct LMS7Parameter BYP_LDO_MXRFE = { 0x0096, 2, 2, 0, "BYP_LDO_MXRFE", "Bypass signal for the LDO" }; +const struct LMS7Parameter BYP_LDO_RBB = { 0x0096, 1, 1, 0, "BYP_LDO_RBB", "Bypass signal for the LDO" }; +const struct LMS7Parameter BYP_LDO_RXBUF = { 0x0096, 0, 0, 0, "BYP_LDO_RXBUF", "Bypass signal for the LDO" }; +const struct LMS7Parameter SPDUP_LDO_DIVSXR = { 0x0097, 15, 15, 0, "SPDUP_LDO_DIVSXR", "Short the noise filter resistor to speed up the settling time" }; +const struct LMS7Parameter SPDUP_LDO_DIVSXT = { 0x0097, 14, 14, 0, "SPDUP_LDO_DIVSXT", "Short the noise filter resistor to speed up the settling time" }; +const struct LMS7Parameter SPDUP_LDO_LNA12 = { 0x0097, 13, 13, 0, "SPDUP_LDO_LNA12", "Short the noise filter resistor to speed up the settling time" }; +const struct LMS7Parameter SPDUP_LDO_LNA14 = { 0x0097, 12, 12, 0, "SPDUP_LDO_LNA14", "Short the noise filter resistor to speed up the settling time" }; +const struct LMS7Parameter SPDUP_LDO_MXRFE = { 0x0097, 11, 11, 0, "SPDUP_LDO_MXRFE", "Short the noise filter resistor to speed up the settling time" }; +const struct LMS7Parameter SPDUP_LDO_RBB = { 0x0097, 10, 10, 0, "SPDUP_LDO_RBB", "Short the noise filter resistor to speed up the settling time" }; +const struct LMS7Parameter SPDUP_LDO_RXBUF = { 0x0097, 9, 9, 0, "SPDUP_LDO_RXBUF", "Short the noise filter resistor to speed up the settling time" }; +const struct LMS7Parameter SPDUP_LDO_TBB = { 0x0097, 8, 8, 0, "SPDUP_LDO_TBB", "Short the noise filter resistor to speed up the settling time" }; +const struct LMS7Parameter SPDUP_LDO_TIA12 = { 0x0097, 7, 7, 0, "SPDUP_LDO_TIA12", "Short the noise filter resistor to speed up the settling time" }; +const struct LMS7Parameter SPDUP_LDO_TIA14 = { 0x0097, 6, 6, 0, "SPDUP_LDO_TIA14", "Short the noise filter resistor to speed up the settling time" }; +const struct LMS7Parameter SPDUP_LDO_TLOB = { 0x0097, 5, 5, 0, "SPDUP_LDO_TLOB", "Short the noise filter resistor to speed up the settling time" }; +const struct LMS7Parameter SPDUP_LDO_TPAD = { 0x0097, 4, 4, 0, "SPDUP_LDO_TPAD", "Short the noise filter resistor to speed up the settling time" }; +const struct LMS7Parameter SPDUP_LDO_TXBUF = { 0x0097, 3, 3, 0, "SPDUP_LDO_TXBUF", "Short the noise filter resistor to speed up the settling time" }; +const struct LMS7Parameter SPDUP_LDO_VCOGN = { 0x0097, 2, 2, 0, "SPDUP_LDO_VCOGN", "Short the noise filter resistor to speed up the settling time" }; +const struct LMS7Parameter SPDUP_LDO_VCOSXR = { 0x0097, 1, 1, 0, "SPDUP_LDO_VCOSXR", "Short the noise filter resistor to speed up the settling time" }; +const struct LMS7Parameter SPDUP_LDO_VCOSXT = { 0x0097, 0, 0, 0, "SPDUP_LDO_VCOSXT", "Short the noise filter resistor to speed up the settling time" }; +const struct LMS7Parameter SPDUP_LDO_AFE = { 0x0098, 8, 8, 0, "SPDUP_LDO_AFE", "Short the noise filter resistor to speed up the settling time" }; +const struct LMS7Parameter SPDUP_LDO_CPGN = { 0x0098, 7, 7, 0, "SPDUP_LDO_CPGN", "Short the noise filter resistor to speed up the settling time" }; +const struct LMS7Parameter SPDUP_LDO_CPSXR = { 0x0098, 6, 6, 0, "SPDUP_LDO_CPSXR", "Short the noise filter resistor to speed up the settling time" }; +const struct LMS7Parameter SPDUP_LDO_CPSXT = { 0x0098, 5, 5, 0, "SPDUP_LDO_CPSXT", "Short the noise filter resistor to speed up the settling time" }; +const struct LMS7Parameter SPDUP_LDO_DIG = { 0x0098, 4, 4, 0, "SPDUP_LDO_DIG", "Short the noise filter resistor to speed up the settling time" }; +const struct LMS7Parameter SPDUP_LDO_DIGGN = { 0x0098, 3, 3, 0, "SPDUP_LDO_DIGGN", "Short the noise filter resistor to speed up the settling time" }; +const struct LMS7Parameter SPDUP_LDO_DIGSXR = { 0x0098, 2, 2, 0, "SPDUP_LDO_DIGSXR", "Short the noise filter resistor to speed up the settling time" }; +const struct LMS7Parameter SPDUP_LDO_DIGSXT = { 0x0098, 1, 1, 0, "SPDUP_LDO_DIGSXT", "Short the noise filter resistor to speed up the settling time" }; +const struct LMS7Parameter SPDUP_LDO_DIVGN = { 0x0098, 0, 0, 0, "SPDUP_LDO_DIVGN", "Short the noise filter resistor to speed up the settling time" }; +const struct LMS7Parameter RDIV_VCOSXR = { 0x0099, 15, 8, 101, "RDIV_VCOSXR", "Controls the output voltage of the LDO by setting the resistive voltage divider ratio" }; +const struct LMS7Parameter RDIV_VCOSXT = { 0x0099, 7, 0, 101, "RDIV_VCOSXT", "Controls the output voltage of the LDO by setting the resistive voltage divider ratio" }; +const struct LMS7Parameter RDIV_TXBUF = { 0x009A, 15, 8, 101, "RDIV_TXBUF", "Controls the output voltage of the LDO by setting the resistive voltage divider ratio" }; +const struct LMS7Parameter RDIV_VCOGN = { 0x009A, 7, 0, 140, "RDIV_VCOGN", "Controls the output voltage of the LDO by setting the resistive voltage divider ratio" }; +const struct LMS7Parameter RDIV_TLOB = { 0x009B, 15, 8, 101, "RDIV_TLOB", "Controls the output voltage of the LDO by setting the resistive voltage divider ratio" }; +const struct LMS7Parameter RDIV_TPAD = { 0x009B, 7, 0, 101, "RDIV_TPAD", "Controls the output voltage of the LDO by setting the resistive voltage divider ratio" }; +const struct LMS7Parameter RDIV_TIA12 = { 0x009C, 15, 8, 101, "RDIV_TIA12", "Controls the output voltage of the LDO by setting the resistive voltage divider ratio" }; +const struct LMS7Parameter RDIV_TIA14 = { 0x009C, 7, 0, 140, "RDIV_TIA14", "Controls the output voltage of the LDO by setting the resistive voltage divider ratio" }; +const struct LMS7Parameter RDIV_RXBUF = { 0x009D, 15, 8, 101, "RDIV_RXBUF", "Controls the output voltage of the LDO by setting the resistive voltage divider ratio" }; +const struct LMS7Parameter RDIV_TBB = { 0x009D, 7, 0, 101, "RDIV_TBB", "Controls the output voltage of the LDO by setting the resistive voltage divider ratio" }; +const struct LMS7Parameter RDIV_MXRFE = { 0x009E, 15, 8, 101, "RDIV_MXRFE", "Controls the output voltage of the LDO by setting the resistive voltage divider ratio" }; +const struct LMS7Parameter RDIV_RBB = { 0x009E, 7, 0, 140, "RDIV_RBB", "Controls the output voltage of the LDO by setting the resistive voltage divider ratio" }; +const struct LMS7Parameter RDIV_LNA12 = { 0x009F, 15, 8, 101, "RDIV_LNA12", "Controls the output voltage of the LDO by setting the resistive voltage divider ratio" }; +const struct LMS7Parameter RDIV_LNA14 = { 0x009F, 7, 0, 140, "RDIV_LNA14", "Controls the output voltage of the LDO by setting the resistive voltage divider ratio" }; +const struct LMS7Parameter RDIV_DIVSXR = { 0x00A0, 15, 8, 101, "RDIV_DIVSXR", "Controls the output voltage of the LDO by setting the resistive voltage divider ratio" }; +const struct LMS7Parameter RDIV_DIVSXT = { 0x00A0, 7, 0, 101, "RDIV_DIVSXT", "Controls the output voltage of the LDO by setting the resistive voltage divider ratio" }; +const struct LMS7Parameter RDIV_DIGSXT = { 0x00A1, 15, 8, 101, "RDIV_DIGSXT", "Controls the output voltage of the LDO by setting the resistive voltage divider ratio" }; +const struct LMS7Parameter RDIV_DIVGN = { 0x00A1, 7, 0, 101, "RDIV_DIVGN", "Controls the output voltage of the LDO by setting the resistive voltage divider ratio" }; +const struct LMS7Parameter RDIV_DIGGN = { 0x00A2, 15, 8, 101, "RDIV_DIGGN", "Controls the output voltage of the LDO by setting the resistive voltage divider ratio" }; +const struct LMS7Parameter RDIV_DIGSXR = { 0x00A2, 7, 0, 101, "RDIV_DIGSXR", "Controls the output voltage of the LDO by setting the resistive voltage divider ratio" }; +const struct LMS7Parameter RDIV_CPSXT = { 0x00A3, 15, 8, 101, "RDIV_CPSXT", "Controls the output voltage of the LDO by setting the resistive voltage divider ratio" }; +const struct LMS7Parameter RDIV_DIG = { 0x00A3, 7, 0, 101, "RDIV_DIG", "Controls the output voltage of the LDO by setting the resistive voltage divider ratio" }; +const struct LMS7Parameter RDIV_CPGN = { 0x00A4, 15, 8, 101, "RDIV_CPGN", "Controls the output voltage of the LDO by setting the resistive voltage divider ratio" }; +const struct LMS7Parameter RDIV_CPSXR = { 0x00A4, 7, 0, 101, "RDIV_CPSXR", "Controls the output voltage of the LDO by setting the resistive voltage divider ratio" }; +const struct LMS7Parameter RDIV_SPIBUF = { 0x00A5, 15, 8, 101, "RDIV_SPIBUF", "Controls the output voltage of the LDO by setting the resistive voltage divider ratio" }; +const struct LMS7Parameter RDIV_AFE = { 0x00A5, 7, 0, 101, "RDIV_AFE", "Controls the output voltage of the LDO by setting the resistive voltage divider ratio" }; +const struct LMS7Parameter SPDUP_LDO_SPIBUF = { 0x00A6, 12, 12, 0, "SPDUP_LDO_SPIBUF", "Short the noise filter resistor to speed up the settling time" }; +const struct LMS7Parameter SPDUP_LDO_DIGIp2 = { 0x00A6, 11, 11, 0, "SPDUP_LDO_DIGIp2", "Short the noise filter resistor to speed up the settling time" }; +const struct LMS7Parameter SPDUP_LDO_DIGIp1 = { 0x00A6, 10, 10, 0, "SPDUP_LDO_DIGIp1", "Short the noise filter resistor to speed up the settling time" }; +const struct LMS7Parameter BYP_LDO_SPIBUF = { 0x00A6, 9, 9, 0, "BYP_LDO_SPIBUF", "Bypass signal for the LDO" }; +const struct LMS7Parameter BYP_LDO_DIGIp2 = { 0x00A6, 8, 8, 0, "BYP_LDO_DIGIp2", "Bypass signal for the LDO" }; +const struct LMS7Parameter BYP_LDO_DIGIp1 = { 0x00A6, 7, 7, 0, "BYP_LDO_DIGIp1", "Bypass signal for the LDO" }; +const struct LMS7Parameter EN_LOADIMP_LDO_SPIBUF = { 0x00A6, 6, 6, 0, "EN_LOADIMP_LDO_SPIBUF", "Enables the load dependent bias to optimize the load regulation" }; +const struct LMS7Parameter EN_LOADIMP_LDO_DIGIp2 = { 0x00A6, 5, 5, 0, "EN_LOADIMP_LDO_DIGIp2", "Enables the load dependent bias to optimize the load regulation" }; +const struct LMS7Parameter EN_LOADIMP_LDO_DIGIp1 = { 0x00A6, 4, 4, 0, "EN_LOADIMP_LDO_DIGIp1", "Enables the load dependent bias to optimize the load regulation" }; +const struct LMS7Parameter PD_LDO_SPIBUF = { 0x00A6, 3, 3, 1, "PD_LDO_SPIBUF", "Enables the LDO" }; +const struct LMS7Parameter PD_LDO_DIGIp2 = { 0x00A6, 2, 2, 1, "PD_LDO_DIGIp2", "Enables the LDO" }; +const struct LMS7Parameter PD_LDO_DIGIp1 = { 0x00A6, 1, 1, 1, "PD_LDO_DIGIp1", "Enables the LDO" }; +const struct LMS7Parameter EN_G_LDOP = { 0x00A6, 0, 0, 1, "EN_G_LDOP", "Enable control for all the LDO power downs" }; +const struct LMS7Parameter RDIV_DIGIp2 = { 0x00A7, 15, 8, 101, "RDIV_DIGIp2", "Controls the output voltage of the LDO by setting the resistive voltage divider ratio" }; +const struct LMS7Parameter RDIV_DIGIp1 = { 0x00A7, 7, 0, 101, "RDIV_DIGIp1", "Controls the output voltage of the LDO by setting the resistive voltage divider ratio" }; +const struct LMS7Parameter BSIGT = { 0x00A8, 31, 9, 0, "BSIGT", "" }; +const struct LMS7Parameter BSTATE = { 0x00A8, 8, 8, 0, "BSTATE", "" }; +const struct LMS7Parameter EN_SDM_TSTO_SXT = { 0x00A8, 6, 6, 0, "EN_SDM_TSTO_SXT", "Enables the SDM_TSTO_SXT" }; +const struct LMS7Parameter EN_SDM_TSTO_SXR = { 0x00A8, 5, 5, 0, "EN_SDM_TSTO_SXR", "Enables the SDM_TSTO_SXR" }; +const struct LMS7Parameter EN_SDM_TSTO_CGEN = { 0x00A8, 4, 4, 0, "EN_SDM_TSTO_CGEN", "Enables the SDM_TSTO_CGEN" }; +const struct LMS7Parameter BENC = { 0x00A8, 3, 3, 0, "BENC", "enables CGEN BIST" }; +const struct LMS7Parameter BENR = { 0x00A8, 2, 2, 0, "BENR", "enables SXR BIST" }; +const struct LMS7Parameter BENT = { 0x00A8, 1, 1, 0, "BENT", "enables SXT BIST" }; +const struct LMS7Parameter BSTART = { 0x00A8, 0, 0, 0, "BSTART", "Starts delta sigma built in self test. Keep it at 1 one at least three clock cycles" }; +const struct LMS7Parameter BSIGR = { 0x00AA, 22, 0, 0, "BSIGR", "" }; +const struct LMS7Parameter BSIGC = { 0x00AB, 29, 7, 0, "BSIGC", "" }; +const struct LMS7Parameter CDS_MCLK2 = { 0x00AD, 15, 14, 0, "CDS_MCLK2", "MCLK2 clock delay" }; +const struct LMS7Parameter CDS_MCLK1 = { 0x00AD, 13, 12, 0, "CDS_MCLK1", "MCLK1 clock delay" }; +const struct LMS7Parameter CDSN_TXBTSP = { 0x00AD, 9, 9, 1, "CDSN_TXBTSP", "TX TSPB clock inversion control" }; +const struct LMS7Parameter CDSN_TXATSP = { 0x00AD, 8, 8, 1, "CDSN_TXATSP", "TX TSPA clock inversion control" }; +const struct LMS7Parameter CDSN_RXBTSP = { 0x00AD, 7, 7, 1, "CDSN_RXBTSP", "RX TSPB clock inversion control" }; +const struct LMS7Parameter CDSN_RXATSP = { 0x00AD, 6, 6, 1, "CDSN_RXATSP", "RX TSPA clock inversion control" }; +const struct LMS7Parameter CDSN_TXBLML = { 0x00AD, 5, 5, 1, "CDSN_TXBLML", "TX LMLB clock inversion control" }; +const struct LMS7Parameter CDSN_TXALML = { 0x00AD, 4, 4, 1, "CDSN_TXALML", "TX LMLA clock inversion control" }; +const struct LMS7Parameter CDSN_RXBLML = { 0x00AD, 3, 3, 1, "CDSN_RXBLML", "RX LMLB clock inversion control" }; +const struct LMS7Parameter CDSN_RXALML = { 0x00AD, 2, 2, 1, "CDSN_RXALML", "RX LMLA clock inversion control" }; +const struct LMS7Parameter CDSN_MCLK2 = { 0x00AD, 1, 1, 1, "CDSN_MCLK2", "MCLK2 clock inversion control" }; +const struct LMS7Parameter CDSN_MCLK1 = { 0x00AD, 0, 0, 1, "CDSN_MCLK1", "MCLK1 clock inversion control" }; +const struct LMS7Parameter CDS_TXBTSP = { 0x00AE, 15, 14, 0, "CDS_TXBTSP", "TX TSP B clock delay" }; +const struct LMS7Parameter CDS_TXATSP = { 0x00AE, 13, 12, 0, "CDS_TXATSP", "TX TSP A clock delay" }; +const struct LMS7Parameter CDS_RXBTSP = { 0x00AE, 11, 10, 0, "CDS_RXBTSP", "RX TSP B clock delay" }; +const struct LMS7Parameter CDS_RXATSP = { 0x00AE, 9, 8, 0, "CDS_RXATSP", "RX TSP A clock delay" }; +const struct LMS7Parameter CDS_TXBLML = { 0x00AE, 7, 6, 0, "CDS_TXBLML", "TX LML B clock delay" }; +const struct LMS7Parameter CDS_TXALML = { 0x00AE, 5, 4, 0, "CDS_TXALML", "TX LML A clock delay" }; +const struct LMS7Parameter CDS_RXBLML = { 0x00AE, 3, 2, 0, "CDS_RXBLML", "RX LML B clock delay" }; +const struct LMS7Parameter CDS_RXALML = { 0x00AE, 1, 0, 0, "CDS_RXALML", "RX LML A clock delay" }; +const struct LMS7Parameter EN_LOWBWLOMX_TMX_TRF = { 0x0100, 15, 15, 0, "EN_LOWBWLOMX_TMX_TRF", "Controls the high pass pole frequency of the RC biasing the gate of the mixer switches" }; +const struct LMS7Parameter EN_NEXTTX_TRF = { 0x0100, 14, 14, 0, "EN_NEXTTX_TRF", "Enables the daisy change LO buffer going from TRF_1 to TRF2" }; +const struct LMS7Parameter EN_AMPHF_PDET_TRF = { 0x0100, 13, 12, 3, "EN_AMPHF_PDET_TRF", "Enables the TXPAD power detector preamplifier" }; +const struct LMS7Parameter LOADR_PDET_TRF = { 0x0100, 11, 10, 1, "LOADR_PDET_TRF", "Controls the resistive load of the Power detector" }; +const struct LMS7Parameter PD_PDET_TRF = { 0x0100, 3, 3, 1, "PD_PDET_TRF", "Powerdown signal for Power Detector" }; +const struct LMS7Parameter PD_TLOBUF_TRF = { 0x0100, 2, 2, 0, "PD_TLOBUF_TRF", "Powerdown signal for TX LO buffer" }; +const struct LMS7Parameter PD_TXPAD_TRF = { 0x0100, 1, 1, 0, "PD_TXPAD_TRF", "Powerdown signal for TXPAD" }; +const struct LMS7Parameter EN_G_TRF = { 0x0100, 0, 0, 1, "EN_G_TRF", "Enable control for all the TRF_1 power downs" }; +const struct LMS7Parameter F_TXPAD_TRF = { 0x0101, 15, 13, 3, "F_TXPAD_TRF", "Controls the switched capacitor at the TXPAD output. Is used for fine tuning of the TXPAD output" }; +const struct LMS7Parameter L_LOOPB_TXPAD_TRF = { 0x0101, 12, 11, 3, "L_LOOPB_TXPAD_TRF", "Controls the loss of the of the loopback path at the TX side" }; +const struct LMS7Parameter LOSS_LIN_TXPAD_TRF = { 0x0101, 10, 6, 0, "LOSS_LIN_TXPAD_TRF", "Controls the gain of the linearizing part of of the TXPAD" }; +const struct LMS7Parameter LOSS_MAIN_TXPAD_TRF = { 0x0101, 5, 1, 0, "LOSS_MAIN_TXPAD_TRF", "Controls the gain output power of the TXPAD" }; +const struct LMS7Parameter EN_LOOPB_TXPAD_TRF = { 0x0101, 0, 0, 0, "EN_LOOPB_TXPAD_TRF", "Enables the TXPAD loopback path" }; +const struct LMS7Parameter GCAS_GNDREF_TXPAD_TRF = { 0x0102, 15, 15, 0, "GCAS_GNDREF_TXPAD_TRF", "Controls if the TXPAD cascode transistor gate bias is referred to VDD or GND" }; +const struct LMS7Parameter ICT_LIN_TXPAD_TRF = { 0x0102, 14, 10, 12, "ICT_LIN_TXPAD_TRF", "Control the bias current of the linearization section of the TXPAD" }; +const struct LMS7Parameter ICT_MAIN_TXPAD_TRF = { 0x0102, 9, 5, 12, "ICT_MAIN_TXPAD_TRF", "Control the bias current of the main gm section of the TXPAD" }; +const struct LMS7Parameter VGCAS_TXPAD_TRF = { 0x0102, 4, 0, 0, "VGCAS_TXPAD_TRF", "Controls the bias voltage at the gate of TXPAD cascade" }; +const struct LMS7Parameter SEL_BAND1_TRF = { 0x0103, 11, 11, 1, "SEL_BAND1_TRF", "" }; +const struct LMS7Parameter SEL_BAND2_TRF = { 0x0103, 10, 10, 0, "SEL_BAND2_TRF", "" }; +const struct LMS7Parameter LOBIASN_TXM_TRF = { 0x0103, 9, 5, 16, "LOBIASN_TXM_TRF", "Controls the bias at the gate of the mixer NMOS" }; +const struct LMS7Parameter LOBIASP_TXX_TRF = { 0x0103, 4, 0, 18, "LOBIASP_TXX_TRF", "Controls the bias at the gate of the mixer PMOS" }; +const struct LMS7Parameter CDC_I_TRF = { 0x0104, 7, 4, 8, "CDC_I_TRF", "" }; +const struct LMS7Parameter CDC_Q_TRF = { 0x0104, 3, 0, 8, "CDC_Q_TRF", "" }; +const struct LMS7Parameter STATPULSE_TBB = { 0x0105, 15, 15, 0, "STATPULSE_TBB", "" }; +const struct LMS7Parameter LOOPB_TBB = { 0x0105, 14, 12, 0, "LOOPB_TBB", "This controls which signal is connected to the loopback output pins. Note: when both the lowpass ladder and real pole are powered down, the output of the active highband biquad is routed to the loopb output" }; +const struct LMS7Parameter PD_LPFH_TBB = { 0x0105, 4, 4, 0, "PD_LPFH_TBB", "This selectively powers down the LPFH_TBB biquad" }; +const struct LMS7Parameter PD_LPFIAMP_TBB = { 0x0105, 3, 3, 0, "PD_LPFIAMP_TBB", "selectively powers down the LPFIAMP_TBB front-end current amp of the transmitter baseband" }; +const struct LMS7Parameter PD_LPFLAD_TBB = { 0x0105, 2, 2, 1, "PD_LPFLAD_TBB", "This selectively powers down the LPFLAD_TBB low pass ladder filter of the transmitter baseband" }; +const struct LMS7Parameter PD_LPFS5_TBB = { 0x0105, 1, 1, 1, "PD_LPFS5_TBB", "This selectively powers down the LPFS5_TBB low pass real-pole filter of the transmitter baseband" }; +const struct LMS7Parameter EN_G_TBB = { 0x0105, 0, 0, 1, "EN_G_TBB", "Enable control for all the TBB_TOP power downs" }; +const struct LMS7Parameter ICT_LPFS5_F_TBB = { 0x0106, 14, 10, 12, "ICT_LPFS5_F_TBB", "This controls the operational amplifier's output stage bias current of the low band real pole filter of the transmitter's baseband" }; +const struct LMS7Parameter ICT_LPFS5_PT_TBB = { 0x0106, 9, 5, 12, "ICT_LPFS5_PT_TBB", "This controls the operational amplifier's input stage bias current of the low band real pole filter of the transmitter's baseband" }; +const struct LMS7Parameter ICT_LPF_H_PT_TBB = { 0x0106, 4, 0, 12, "ICT_LPF_H_PT_TBB", "This controls the operational amplifiers input stage bias reference current of the high band low pass filter of the transmitter's baseband " }; +const struct LMS7Parameter ICT_LPFH_F_TBB = { 0x0107, 14, 10, 12, "ICT_LPFH_F_TBB", "controls the operational amplifiers output stage bias reference current of the high band low pass filter of the transmitter's baseband (LPFH_TBB)" }; +const struct LMS7Parameter ICT_LPFLAD_F_TBB = { 0x0107, 9, 5, 12, "ICT_LPFLAD_F_TBB", "This controls the operational amplfiers' output stages bias referene current of the low band ladder filter of the transmisster's baseband" }; +const struct LMS7Parameter ICT_LPFLAD_PT_TBB = { 0x0107, 4, 0, 12, "ICT_LPFLAD_PT_TBB", "This controls the operational amplifers' input stages bias reference current of the low band ladder filter of the transmitter's baseband" }; +const struct LMS7Parameter CG_IAMP_TBB = { 0x0108, 15, 10, 37, "CG_IAMP_TBB", "This controls the frontend gain of the TBB. For a given gain value, this control value varies with the set TX mode. After resistance calibration, the following table gives the nominal values for each frequency setting. However, this table is to be updated and corrected after calibration" }; +const struct LMS7Parameter ICT_IAMP_FRP_TBB = { 0x0108, 9, 5, 1, "ICT_IAMP_FRP_TBB", "This controls the reference bias current of the IAMP main bias current sources" }; +const struct LMS7Parameter ICT_IAMP_GG_FRP_TBB = { 0x0108, 4, 0, 6, "ICT_IAMP_GG_FRP_TBB", "This controls the reference bias current of the IAMP's cascode transistors gate voltages that set the IAMP's input voltage level. The IAMP's input is connected to the DAC output" }; +const struct LMS7Parameter RCAL_LPFH_TBB = { 0x0109, 15, 8, 97, "RCAL_LPFH_TBB", "This controls the value of the equivalent resistance of the resistor banks of the biquad filter stage (of the high band section) of the transmitter baseband(TBB)" }; +const struct LMS7Parameter RCAL_LPFLAD_TBB = { 0x0109, 7, 0, 193, "RCAL_LPFLAD_TBB", "This controls the value of the equivalent resistance of the resistor banks of the low pass filter ladder (of the low band section) of the transmitter baseband(TBB)" }; +const struct LMS7Parameter TSTIN_TBB = { 0x010A, 15, 14, 0, "TSTIN_TBB", "This control selects where the input test signal (vinp/n_aux_bbq/i) is routed to as well as disabling the route." }; +const struct LMS7Parameter BYPLADDER_TBB = { 0x010A, 13, 13, 0, "BYPLADDER_TBB", "This signal bypasses the LPF ladder of TBB and directly connects the output of current amplifier to the null port of the real pole stage of TBB low pass filter" }; +const struct LMS7Parameter CCAL_LPFLAD_TBB = { 0x010A, 12, 8, 16, "CCAL_LPFLAD_TBB", "A common control signal for all the capacitor banks of TBB filters (including the ladder, real pole, and the high band biquad). It is the calibrated value of the banks control that sets the value of the banks' equivalent capacitor to their respective nominal values" }; +const struct LMS7Parameter RCAL_LPFS5_TBB = { 0x010A, 7, 0, 76, "RCAL_LPFS5_TBB", "This controls the value of the equivalent resistance of the resistor banks of the real pole filter stage (of the low band section) of the transmitter baseband (TBB). Following is a nominal values table that are corrected for any process variation after calibration" }; +const struct LMS7Parameter CDC_I_RFE = { 0x010C, 15, 12, 8, "CDC_I_RFE", "" }; +const struct LMS7Parameter CDC_Q_RFE = { 0x010C, 11, 8, 8, "CDC_Q_RFE", "" }; +const struct LMS7Parameter PD_LNA_RFE = { 0x010C, 7, 7, 1, "PD_LNA_RFE", "Power control signal for LNA_RFE" }; +const struct LMS7Parameter PD_RLOOPB_1_RFE = { 0x010C, 6, 6, 1, "PD_RLOOPB_1_RFE", "Power control signal for RXFE loopback 1" }; +const struct LMS7Parameter PD_RLOOPB_2_RFE = { 0x010C, 5, 5, 1, "PD_RLOOPB_2_RFE", "Power control signal for RXFE loopback 2" }; +const struct LMS7Parameter PD_MXLOBUF_RFE = { 0x010C, 4, 4, 1, "PD_MXLOBUF_RFE", "Power control signal for RXFE mixer lo buffer" }; +const struct LMS7Parameter PD_QGEN_RFE = { 0x010C, 3, 3, 1, "PD_QGEN_RFE", "Power control signal for RXFE Quadrature LO generator" }; +const struct LMS7Parameter PD_RSSI_RFE = { 0x010C, 2, 2, 1, "PD_RSSI_RFE", "Power control signal for RXFE RSSI" }; +const struct LMS7Parameter PD_TIA_RFE = { 0x010C, 1, 1, 0, "PD_TIA_RFE", "Power control signal for RXFE TIA" }; +const struct LMS7Parameter EN_G_RFE = { 0x010C, 0, 0, 1, "EN_G_RFE", "Enable control for all the RFE_1 power downs" }; +const struct LMS7Parameter SEL_PATH_RFE = { 0x010D, 8, 7, 1, "SEL_PATH_RFE", "Selects the active path of the RXFE" }; +const struct LMS7Parameter EN_DCOFF_RXFE_RFE = { 0x010D, 6, 6, 0, "EN_DCOFF_RXFE_RFE", "Enables the DCOFFSET block for the RXFE" }; +const struct LMS7Parameter EN_INSHSW_LB1_RFE = { 0x010D, 4, 4, 1, "EN_INSHSW_LB1_RFE", "Enables the input shorting switch at the input of the loopback 1 (in parallel with LNAL mixer)" }; +const struct LMS7Parameter EN_INSHSW_LB2_RFE = { 0x010D, 3, 3, 1, "EN_INSHSW_LB2_RFE", "Enables the input shorting switch at the input of the loopback 2 (in parallel with LNAW mixer)" }; +const struct LMS7Parameter EN_INSHSW_L_RFE = { 0x010D, 2, 2, 1, "EN_INSHSW_L_RFE", "Enables the input shorting switch at the input of the LNAL" }; +const struct LMS7Parameter EN_INSHSW_W_RFE = { 0x010D, 1, 1, 1, "EN_INSHSW_W_RFE", "Enables the input shorting switch at the input of the LNAW" }; +const struct LMS7Parameter EN_NEXTRX_RFE = { 0x010D, 0, 0, 0, "EN_NEXTRX_RFE", "Enables the daisy chain LO buffer going from RXFE1 to RXFE2" }; +const struct LMS7Parameter DCOFFI_RFE = { 0x010E, 13, 7, 64, "DCOFFI_RFE", "Controls DC offset at the output of the TIA by injecting current to the input of the TIA (I side)" }; +const struct LMS7Parameter DCOFFQ_RFE = { 0x010E, 6, 0, 64, "DCOFFQ_RFE", "Controls DC offset at the output of the TIA by injecting current to the input of the TIA (Q side)" }; +const struct LMS7Parameter ICT_LOOPB_RFE = { 0x010F, 14, 10, 12, "ICT_LOOPB_RFE", "Controls the reference current of the RXFE loopback amplifier" }; +const struct LMS7Parameter ICT_TIAMAIN_RFE = { 0x010F, 9, 5, 2, "ICT_TIAMAIN_RFE", "Controls the reference current of the RXFE TIA first stage" }; +const struct LMS7Parameter ICT_TIAOUT_RFE = { 0x010F, 4, 0, 2, "ICT_TIAOUT_RFE", "Controls the reference current of the RXFE TIA 2nd stage" }; +const struct LMS7Parameter ICT_LNACMO_RFE = { 0x0110, 14, 10, 2, "ICT_LNACMO_RFE", "Controls the current generating LNA output common mode voltage" }; +const struct LMS7Parameter ICT_LNA_RFE = { 0x0110, 9, 5, 31, "ICT_LNA_RFE", "Controls the current of the LNA core" }; +const struct LMS7Parameter ICT_LODC_RFE = { 0x0110, 4, 0, 20, "ICT_LODC_RFE", "Controls the DC of the mixer LO signal at the gate of the mixer switches" }; +const struct LMS7Parameter CAP_RXMXO_RFE = { 0x0111, 9, 5, 4, "CAP_RXMXO_RFE", "Control the decoupling cap at the output of the RX Mixer" }; +const struct LMS7Parameter CGSIN_LNA_RFE = { 0x0111, 4, 0, 3, "CGSIN_LNA_RFE", "Controls the cap parallel with the LNA input input NMOS CGS to control the Q of the maching circuit and provides trade off between gain/NF and IIP. The higher the frequency, the lower CGSIN_LNA_RFE should be. Also, the higher CGSIN, the lower the Q, The lower the gain, the higher the NF, and the higher the IIP3" }; +const struct LMS7Parameter CCOMP_TIA_RFE = { 0x0112, 15, 12, 12, "CCOMP_TIA_RFE", "Compensation capacitor for TIA" }; +const struct LMS7Parameter CFB_TIA_RFE = { 0x0112, 11, 0, 230, "CFB_TIA_RFE", "Feeback capacitor for TIA. Controls the 3dB BW of the TIA. Should be set with calibration through digital baseband" }; +const struct LMS7Parameter G_LNA_RFE = { 0x0113, 9, 6, 15, "G_LNA_RFE", "Controls the gain of the LNA" }; +const struct LMS7Parameter G_RXLOOPB_RFE = { 0x0113, 5, 2, 0, "G_RXLOOPB_RFE", "Controls RXFE loopback gain" }; +const struct LMS7Parameter G_TIA_RFE = { 0x0113, 1, 0, 3, "G_TIA_RFE", "Controls the Gain of the TIA" }; +const struct LMS7Parameter RCOMP_TIA_RFE = { 0x0114, 8, 5, 4, "RCOMP_TIA_RFE", "Controls the compensation resistors of the TIA opamp" }; +const struct LMS7Parameter RFB_TIA_RFE = { 0x0114, 4, 0, 13, "RFB_TIA_RFE", "Sets the feedback resistor to the nominal value" }; +const struct LMS7Parameter EN_LB_LPFH_RBB = { 0x0115, 15, 15, 0, "EN_LB_LPFH_RBB", "" }; +const struct LMS7Parameter EN_LB_LPFL_RBB = { 0x0115, 14, 14, 0, "EN_LB_LPFL_RBB", "" }; +const struct LMS7Parameter PD_LPFH_RBB = { 0x0115, 3, 3, 1, "PD_LPFH_RBB", "Power down of the LPFH block" }; +const struct LMS7Parameter PD_LPFL_RBB = { 0x0115, 2, 2, 0, "PD_LPFL_RBB", "Power down of the LPFL block" }; +const struct LMS7Parameter PD_PGA_RBB = { 0x0115, 1, 1, 0, "PD_PGA_RBB", "Power down of the PGA block" }; +const struct LMS7Parameter EN_G_RBB = { 0x0115, 0, 0, 1, "EN_G_RBB", "Enable control for all the RBB_1 power downs" }; +const struct LMS7Parameter R_CTL_LPF_RBB = { 0x0116, 15, 11, 16, "R_CTL_LPF_RBB", "Controls the absolute value of the resistance of the RC time constant of the RBB_LPF blocks (both Low and High)" }; +const struct LMS7Parameter RCC_CTL_LPFH_RBB = { 0x0116, 10, 8, 1, "RCC_CTL_LPFH_RBB", "Controls the stability passive compensation of the LPFH_RBB operational amplifier" }; +const struct LMS7Parameter C_CTL_LPFH_RBB = { 0x0116, 7, 0, 128, "C_CTL_LPFH_RBB", "Controls the capacitance value of the RC time constant of RBB_LPFH and it varies with the respective rxMode from 37MHz to 108MHz" }; +const struct LMS7Parameter RCC_CTL_LPFL_RBB = { 0x0117, 13, 11, 5, "RCC_CTL_LPFL_RBB", "Controls the stability passive compensation of the LPFL_RBB operational amplifier" }; +const struct LMS7Parameter C_CTL_LPFL_RBB = { 0x0117, 10, 0, 12, "C_CTL_LPFL_RBB", "Controls the capacitance value of the RC time constant of RBB_LPFH and it varies with the respective rxMode from 1.4MHz to 20MHz." }; +const struct LMS7Parameter INPUT_CTL_PGA_RBB = { 0x0118, 15, 13, 0, "INPUT_CTL_PGA_RBB", "There are a total of four different differential inputs to the PGA. Only one of them is active at a time" }; +const struct LMS7Parameter ICT_LPF_IN_RBB = { 0x0118, 9, 5, 12, "ICT_LPF_IN_RBB", "Controls the reference bias current of the input stage of the operational amplifier used in RBB_LPF blocks (Low or High). " }; +const struct LMS7Parameter ICT_LPF_OUT_RBB = { 0x0118, 4, 0, 12, "ICT_LPF_OUT_RBB", "The reference bias current of the output stage of the operational amplifier used in RBB_LPF blocks (low or High)" }; +const struct LMS7Parameter OSW_PGA_RBB = { 0x0119, 15, 15, 0, "OSW_PGA_RBB", "There are two instances of the PGA circuit in the design. The output of the RBB_LPF blocks are connected the input of these PGA blocks (common). The output of one of them is connected to two pads pgaoutn and pgaoutp and the output of the other PGA is connected directly to the ADC input" }; +const struct LMS7Parameter ICT_PGA_OUT_RBB = { 0x0119, 14, 10, 6, "ICT_PGA_OUT_RBB", "Controls the output stage reference bias current of the operational amplifier used in the PGA circuit" }; +const struct LMS7Parameter ICT_PGA_IN_RBB = { 0x0119, 9, 5, 6, "ICT_PGA_IN_RBB", "Controls the input stage reference bias current of the operational amplifier used in the PGA circuit" }; +const struct LMS7Parameter G_PGA_RBB = { 0x0119, 4, 0, 11, "G_PGA_RBB", "This is the gain of the PGA" }; +const struct LMS7Parameter RCC_CTL_PGA_RBB = { 0x011A, 13, 9, 23, "RCC_CTL_PGA_RBB", "Controls the stability passive compensation of the PGA_RBB operational amplifier" }; +const struct LMS7Parameter C_CTL_PGA_RBB = { 0x011A, 6, 0, 2, "C_CTL_PGA_RBB", "Control the value of the feedback capacitor of the PGA that is used to help against the parasitic cap at the virtual node for stability" }; +const struct LMS7Parameter RESET_N = { 0x011C, 15, 15, 1, "RESET_N", "Resets SX. A pulse should be used in the start-up to reset" }; +const struct LMS7Parameter SPDUP_VCO = { 0x011C, 14, 14, 0, "SPDUP_VCO", "Bypasses the noise filter resistor for fast settling time. It should be connected to a 1uS pulse" }; +const struct LMS7Parameter BYPLDO_VCO = { 0x011C, 13, 13, 1, "BYPLDO_VCO", "Controls the bypass signal for the SX LDO" }; +const struct LMS7Parameter EN_COARSEPLL = { 0x011C, 12, 12, 0, "EN_COARSEPLL", "Enable signal for coarse tuning block" }; +const struct LMS7Parameter CURLIM_VCO = { 0x011C, 11, 11, 1, "CURLIM_VCO", "Enables the output current limitation in the VCO regulator" }; +const struct LMS7Parameter EN_DIV2_DIVPROG = { 0x011C, 10, 10, 1, "EN_DIV2_DIVPROG", "" }; +const struct LMS7Parameter EN_INTONLY_SDM = { 0x011C, 9, 9, 0, "EN_INTONLY_SDM", "Enables INTEGER-N mode of the SX " }; +const struct LMS7Parameter EN_SDM_CLK = { 0x011C, 8, 8, 1, "EN_SDM_CLK", "Enables/Disables SDM clock. In INT-N mode or for noise testing, SDM clock can be disabled" }; +const struct LMS7Parameter PD_FBDIV = { 0x011C, 7, 7, 0, "PD_FBDIV", "Power down the feedback divider block" }; +const struct LMS7Parameter PD_LOCH_T2RBUF = { 0x011C, 6, 6, 1, "PD_LOCH_T2RBUF", "Power down for LO buffer from SXT to SXR. To be active only in the TDD mode" }; +const struct LMS7Parameter PD_CP = { 0x011C, 5, 5, 0, "PD_CP", "Power down for Charge Pump" }; +const struct LMS7Parameter PD_FDIV = { 0x011C, 4, 4, 0, "PD_FDIV", "Power down for feedback frequency and forward dividers" }; +const struct LMS7Parameter PD_SDM = { 0x011C, 3, 3, 0, "PD_SDM", "Power down for SDM" }; +const struct LMS7Parameter PD_VCO_COMP = { 0x011C, 2, 2, 0, "PD_VCO_COMP", "Power down for VCO comparator" }; +const struct LMS7Parameter PD_VCO = { 0x011C, 1, 1, 1, "PD_VCO", "Power down for VCO" }; +const struct LMS7Parameter EN_G = { 0x011C, 0, 0, 1, "EN_G", "Enable control for all the SXT power downs" }; +const struct LMS7Parameter FRAC_SDM_LSB = { 0x011D, 15, 0, 0x0400, "FRAC_SDM_LSB", "" }; +const struct LMS7Parameter INT_SDM = { 0x011E, 13, 4, 120, "INT_SDM", "" }; +const struct LMS7Parameter FRAC_SDM_MSB = { 0x011E, 3, 0, 0, "FRAC_SDM_MSB", "" }; +const struct LMS7Parameter PW_DIV2_LOCH = { 0x011F, 14, 12, 3, "PW_DIV2_LOCH", "trims the duty cycle of DIV2 LOCH. Only works when forward divider is dividing by at least 2 (excluding quadrature block division). If in bypass mode, this does not work" }; +const struct LMS7Parameter PW_DIV4_LOCH = { 0x011F, 11, 9, 3, "PW_DIV4_LOCH", "trims the duty cycle of DIV4 LOCH. Only works when forward divider is dividing by at least 4 (excluding quadrature block division). If in bypass mode, this does not work" }; +const struct LMS7Parameter DIV_LOCH = { 0x011F, 8, 6, 1, "DIV_LOCH", "Controls the division ratio in the LOCH_DIV" }; +const struct LMS7Parameter TST_SX = { 0x011F, 5, 3, 0, "TST_SX", +"Controls the test mode of PLLs. TST signal lines are shared between all PLLs (CGEN, RX and TX). Only one TST signal of any PLL should be active at a given time.\n\ +0 - TST disabled; RSSI analog outputs enabled if RSSI blocks active and when all PLL test signals are off(default)\n\ +1 - tstdo[0] = VCO / 20 clock*; tstdo[1] = VCO / 40 clock*; tstao = High impedance;\n\ +2 - tstdo[0] = SDM clock; tstdo[1] = feedback divider output; tstao = VCO tune through a 60kOhm resistor;\n\ +3 - tstdo[0] = Reference clock; tstdo[1] = feedback divider output; tstao = VCO tune through a 10kOhm resistor;\n\ +4 - tstdo[0] = High impedance; tstdo[1] = High impedance; tstao = High impedance;\n\ +5 - tstdo[0] = Charge pump Down signal; tstdo[1] = Charge pump Up signal; tstao = High impedance;\n\ +6 - tstdo[0] = High impedance; tstdo[1] = High impedance; tstao = VCO tune through a 60kOhm resistor;\n\ +7 - tstdo[0] = High impedance; tstdo[1] = High impedance; tstao = VCO tune through a 10kOhm resistor;\n\ +if TST_SX[2] = 1 --> VCO_TSTBUF active generating VCO_TST_DIV20 and VCO_TST_DIV40\n\ +* When EN_DIV2_DIVPROG_(SXR, SXT) is active, the division ratio must be multiplied by 2 (40 / 80)"}; +const struct LMS7Parameter SEL_SDMCLK = { 0x011F, 2, 2, 0, "SEL_SDMCLK", "Selects between the feedback divider output and Fref for SDM" }; +const struct LMS7Parameter SX_DITHER_EN = { 0x011F, 1, 1, 0, "SX_DITHER_EN", "Enabled dithering in SDM" }; +const struct LMS7Parameter REV_SDMCLK = { 0x011F, 0, 0, 0, "REV_SDMCLK", "Reverses the SDM clock" }; +const struct LMS7Parameter VDIV_VCO = { 0x0120, 15, 8, 185, "VDIV_VCO", "Controls VCO LDO output voltage" }; +const struct LMS7Parameter ICT_VCO = { 0x0120, 7, 0, 255, "ICT_VCO", "Scales the VCO bias current from 0 to 2.5xInom" }; +const struct LMS7Parameter RSEL_LDO_VCO = { 0x0121, 15, 11, 6, "RSEL_LDO_VCO", "Set the reference voltage that supplies bias voltage of switch-cap array and varactor" }; +const struct LMS7Parameter CSW_VCO = { 0x0121, 10, 3, 128, "CSW_VCO", "Coarse control of VCO frequency, 0 for lowest frequency and 255 for highest. This control is set by SX_SWC_calibration" }; +const struct LMS7Parameter SEL_VCO = { 0x0121, 2, 1, 2, "SEL_VCO", "Selects the active VCO. It is set by SX_SWC_calibration" }; +const struct LMS7Parameter COARSE_START = { 0x0121, 0, 0, 0, "COARSE_START", "" }; +const struct LMS7Parameter REVPH_PFD = { 0x0122, 12, 12, 0, "REVPH_PFD", "Reverse the pulses of PFD. It can be used to reverse the polarity of the PLL loop (positive feedback to negative feedback)" }; +const struct LMS7Parameter IOFFSET_CP = { 0x0122, 11, 6, 12, "IOFFSET_CP", "Scales the offset current of the charge pump, 0-->63. This current is used in Fran-N mode to create an offset in the CP response and avoid the non-linear section" }; +const struct LMS7Parameter IPULSE_CP = { 0x0122, 5, 0, 63, "IPULSE_CP", "Scales the pulse current of the charge pump" }; +const struct LMS7Parameter COARSE_STEPDONE = { 0x0123, 15, 15, 0, "COARSE_STEPDONE", "" }; +const struct LMS7Parameter COARSEPLL_COMPO = { 0x0123, 14, 14, 0, "COARSEPLL_COMPO", "" }; +const struct LMS7Parameter VCO_CMPHO = { 0x0123, 13, 13, 0, "VCO_CMPHO", "" }; +const struct LMS7Parameter VCO_CMPLO = { 0x0123, 12, 12, 0, "VCO_CMPLO", "" }; +const struct LMS7Parameter CP2_PLL = { 0x0123, 11, 8, 6, "CP2_PLL", "Controls the value of CP2 (cap from CP output to GND) in the PLL filter" }; +const struct LMS7Parameter CP3_PLL = { 0x0123, 7, 4, 7, "CP3_PLL", "Controls the value of CP3 (cap from VCO Vtune input to GND) in the PLL filter" }; +const struct LMS7Parameter CZ = { 0x0123, 3, 0, 11, "CZ", "Controls the value of CZ (Zero capacitor) in the PLL filter" }; +const struct LMS7Parameter EN_DIR_SXRSXT = { 0x0124, 4, 4, 0, "EN_DIR_SXRSXT", "Enables direct control of PDs and ENs for SXR/SXT module" }; +const struct LMS7Parameter EN_DIR_RBB = { 0x0124, 3, 3, 0, "EN_DIR_RBB", "Enables direct control of PDs and ENs for RBB module" }; +const struct LMS7Parameter EN_DIR_RFE = { 0x0124, 2, 2, 0, "EN_DIR_RFE", "Enables direct control of PDs and ENs for RFE module" }; +const struct LMS7Parameter EN_DIR_TBB = { 0x0124, 1, 1, 0, "EN_DIR_TBB", "Enables direct control of PDs and ENs for TBB module" }; +const struct LMS7Parameter EN_DIR_TRF = { 0x0124, 0, 0, 0, "EN_DIR_TRF", "Enables direct control of PDs and ENs for TRF module" }; +const struct LMS7Parameter TSGFC_TXTSP = { 0x0200, 9, 9, 0, "TSGFC_TXTSP", "TSG full scale control" }; +const struct LMS7Parameter TSGFCW_TXTSP = { 0x0200, 8, 7, 1, "TSGFCW_TXTSP", "Set frequency of TSG's NCO" }; +const struct LMS7Parameter TSGDCLDQ_TXTSP = { 0x0200, 6, 6, 0, "TSGDCLDQ_TXTSP", "" }; +const struct LMS7Parameter TSGDCLDI_TXTSP = { 0x0200, 5, 5, 0, "TSGDCLDI_TXTSP", "" }; +const struct LMS7Parameter TSGSWAPIQ_TXTSP = { 0x0200, 4, 4, 0, "TSGSWAPIQ_TXTSP", "Swap signals at test signal generator's output" }; +const struct LMS7Parameter TSGMODE_TXTSP = { 0x0200, 3, 3, 0, "TSGMODE_TXTSP", "Test signal generator mode" }; +const struct LMS7Parameter INSEL_TXTSP = { 0x0200, 2, 2, 0, "INSEL_TXTSP", "Input source of TxTSP" }; +const struct LMS7Parameter BSTART_TXTSP = { 0x0200, 1, 1, 0, "BSTART_TXTSP", "Starts delta sigma built in self test. Keep it at 1 one at least three clock cycles" }; +const struct LMS7Parameter EN_TXTSP = { 0x0200, 0, 0, 1, "EN_TXTSP", "TxTSP modules enable" }; +const struct LMS7Parameter GCORRQ_TXTSP = { 0x0201, 10, 0, 2047, "GCORRQ_TXTSP", "corrector value, channel Q Unsigned integer" }; +const struct LMS7Parameter GCORRI_TXTSP = { 0x0202, 10, 0, 2047, "GCORRI_TXTSP", "corrector value, channel I Unsigned integer" }; +const struct LMS7Parameter HBI_OVR_TXTSP = { 0x0203, 14, 12, 0, "HBI_OVR_TXTSP", "HBI interpolation ratio" }; +const struct LMS7Parameter IQCORR_TXTSP = { 0x0203, 11, 0, 0, "IQCORR_TXTSP", "Phase corrector value (tan(Alpha/2)). Integer, 2's complement" }; +const struct LMS7Parameter DCCORRI_TXTSP = { 0x0204, 15, 8, 0, "DCCORRI_TXTSP", "DC corrector value, channel I. Integer, 2's complement" }; +const struct LMS7Parameter DCCORRQ_TXTSP = { 0x0204, 7, 0, 0, "DCCORRQ_TXTSP", "DC corrector value, channel Q. Integer, 2's complement" }; +const struct LMS7Parameter GFIR1_L_TXTSP = { 0x0205, 10, 8, 0, "GFIR1_L_TXTSP", "Parameter l of GFIR1 (l = roundUp(CoeffN/5)-1). Unsigned integer" }; +const struct LMS7Parameter GFIR1_N_TXTSP = { 0x0205, 7, 0, 0, "GFIR1_N_TXTSP", "Clock division ratio of GFIR1 is GFIR1_N + 1. Unsigned integer" }; +const struct LMS7Parameter GFIR2_L_TXTSP = { 0x0206, 10, 8, 0, "GFIR2_L_TXTSP", "Parameter l of GFIR2 (l = roundUp(CoeffN/5)-1). Unsigned integer" }; +const struct LMS7Parameter GFIR2_N_TXTSP = { 0x0206, 7, 0, 0, "GFIR2_N_TXTSP", "Clock division ratio of GFIR2 is GFIR2_N + 1. Unsigned integer" }; +const struct LMS7Parameter GFIR3_L_TXTSP = { 0x0207, 10, 8, 0, "GFIR3_L_TXTSP", "Parameter l of GFIR3 (l = roundUp(CoeffN/5)-1). Unsigned integer" }; +const struct LMS7Parameter GFIR3_N_TXTSP = { 0x0207, 7, 0, 0, "GFIR3_N_TXTSP", "Clock division ratio of GFIR3 is GFIR3_N + 1. Unsigned integer" }; +const struct LMS7Parameter CMIX_GAIN_TXTSP = { 0x0208, 15, 14, 0, "CMIX_GAIN_TXTSP", "Gain of CMIX output" }; +const struct LMS7Parameter CMIX_SC_TXTSP = { 0x0208, 13, 13, 0, "CMIX_SC_TXTSP", "Spectrum control of CMIX" }; +const struct LMS7Parameter CMIX_BYP_TXTSP = { 0x0208, 8, 8, 0, "CMIX_BYP_TXTSP", "CMIX bypass" }; +const struct LMS7Parameter ISINC_BYP_TXTSP = { 0x0208, 7, 7, 0, "ISINC_BYP_TXTSP", "ISINC bypass" }; +const struct LMS7Parameter GFIR3_BYP_TXTSP = { 0x0208, 6, 6, 0, "GFIR3_BYP_TXTSP", "GFIR3 bypass" }; +const struct LMS7Parameter GFIR2_BYP_TXTSP = { 0x0208, 5, 5, 0, "GFIR2_BYP_TXTSP", "GFIR2 bypass" }; +const struct LMS7Parameter GFIR1_BYP_TXTSP = { 0x0208, 4, 4, 0, "GFIR1_BYP_TXTSP", "GFIR1 bypass" }; +const struct LMS7Parameter DC_BYP_TXTSP = { 0x0208, 3, 3, 0, "DC_BYP_TXTSP", "DC corrector bypass" }; +const struct LMS7Parameter GC_BYP_TXTSP = { 0x0208, 1, 1, 0, "GC_BYP_TXTSP", "Gain corrector bypass" }; +const struct LMS7Parameter PH_BYP_TXTSP = { 0x0208, 0, 0, 0, "PH_BYP_TXTSP", "Phase corrector bypass" }; +const struct LMS7Parameter BSIGI_TXTSP = { 0x0209, 23, 1, 0, "BSIGI_TXTSP", "" }; +const struct LMS7Parameter BSTATE_TXTSP = { 0x0209, 0, 0, 0, "BSTATE_TXTSP", "" }; +const struct LMS7Parameter BSIGQ_TXTSP = { 0x020A, 30, 8, 0, "BSIGQ_TXTSP", "" }; +const struct LMS7Parameter DC_REG_TXTSP = { 0x020C, 15, 0, 0, "DC_REG_TXTSP", "" }; +const struct LMS7Parameter DTHBIT_TX = { 0x0240, 8, 5, 1, "DTHBIT_TX", "NCO bits to dither" }; +const struct LMS7Parameter SEL_TX = { 0x0240, 4, 1, 0, "SEL_TX", "" }; +const struct LMS7Parameter MODE_TX = { 0x0240, 0, 0, 0, "MODE_TX", "" }; +const struct LMS7Parameter CAPTURE = { 0x0400, 15, 15, 0, "CAPTURE", "" }; +const struct LMS7Parameter CAPSEL = { 0x0400, 14, 13, 0, "CAPSEL", "" }; +const struct LMS7Parameter CAPSEL_ADC = { 0x0400, 12, 12, 0, "CAPSEL_ADC", "" }; +const struct LMS7Parameter TSGFC_RXTSP = { 0x0400, 9, 9, 0, "TSGFC_RXTSP", "TSG full scale control" }; +const struct LMS7Parameter TSGFCW_RXTSP = { 0x0400, 8, 7, 1, "TSGFCW_RXTSP", "Set frequency of TSG's NCO" }; +const struct LMS7Parameter TSGDCLDQ_RXTSP = { 0x0400, 6, 6, 0, "TSGDCLDQ_RXTSP", "" }; +const struct LMS7Parameter TSGDCLDI_RXTSP = { 0x0400, 5, 5, 0, "TSGDCLDI_RXTSP", "" }; +const struct LMS7Parameter TSGSWAPIQ_RXTSP = { 0x0400, 4, 4, 0, "TSGSWAPIQ_RXTSP", "Swap signals at test signal generator's output" }; +const struct LMS7Parameter TSGMODE_RXTSP = { 0x0400, 3, 3, 0, "TSGMODE_RXTSP", "Test signal generator mode" }; +const struct LMS7Parameter INSEL_RXTSP = { 0x0400, 2, 2, 0, "INSEL_RXTSP", "Input source of RxTSP" }; +const struct LMS7Parameter BSTART_RXTSP = { 0x0400, 1, 1, 0, "BSTART_RXTSP", "Starts delta sigma built in self test. Keep it at 1 one at least three clock cycles" }; +const struct LMS7Parameter EN_RXTSP = { 0x0400, 0, 0, 1, "EN_RXTSP", "RxTSP modules enable" }; +const struct LMS7Parameter GCORRQ_RXTSP = { 0x0401, 10, 0, 2047, "GCORRQ_RXTSP", "corrector value, channel Q Unsigned integer" }; +const struct LMS7Parameter GCORRI_RXTSP = { 0x0402, 10, 0, 2047, "GCORRI_RXTSP", "corrector value, channel I Unsigned integer" }; +const struct LMS7Parameter HBD_OVR_RXTSP = { 0x0403, 14, 12, 0, "HBD_OVR_RXTSP", "HBD interpolation ratio. Interpolation ratio is 2HBD_OVR+1" }; +const struct LMS7Parameter IQCORR_RXTSP = { 0x0403, 11, 0, 0, "IQCORR_RXTSP", "Phase corrector value (tan(Alpha/2)). Integer, 2's complement" }; +const struct LMS7Parameter HBD_DLY = { 0x0404, 15, 13, 0, "HBD_DLY", "" }; +const struct LMS7Parameter DCLOOP_BYP = { 0x0404, 8, 8, 0, "DCLOOP_BYP", "" }; +const struct LMS7Parameter DCCORR_AVG_RXTSP = { 0x0404, 2, 0, 0, "DCCORR_AVG_RXTSP", "Number of samples to average for Automatic DC corrector. Number of samples to average is 2DCCORR_AVG + 12" }; +const struct LMS7Parameter GFIR1_L_RXTSP = { 0x0405, 10, 8, 0, "GFIR1_L_RXTSP", "Parameter l of GFIR1 (l = roundUp(CoeffN/5)-1). Unsigned integer" }; +const struct LMS7Parameter GFIR1_N_RXTSP = { 0x0405, 7, 0, 0, "GFIR1_N_RXTSP", "Clock division ratio of GFIR1 is GFIR1_N + 1. Unsigned integer" }; +const struct LMS7Parameter GFIR2_L_RXTSP = { 0x0406, 10, 8, 0, "GFIR2_L_RXTSP", "Parameter l of GFIR2 (l = roundUp(CoeffN/5)-1). Unsigned integer" }; +const struct LMS7Parameter GFIR2_N_RXTSP = { 0x0406, 7, 0, 0, "GFIR2_N_RXTSP", "Clock division ratio of GFIR2 is GFIR2_N + 1. Unsigned integer" }; +const struct LMS7Parameter GFIR3_L_RXTSP = { 0x0407, 10, 8, 0, "GFIR3_L_RXTSP", "Parameter l of GFIR3 (l = roundUp(CoeffN/5)-1). Unsigned integer" }; +const struct LMS7Parameter GFIR3_N_RXTSP = { 0x0407, 7, 0, 0, "GFIR3_N_RXTSP", "Clock division ratio of GFIR3 is GFIR3_N + 1. Unsigned integer" }; +const struct LMS7Parameter AGC_K_RXTSP = { 0x0408, 17, 0, 0, "AGC_K_RXTSP", "AGC loop gain" }; +const struct LMS7Parameter AGC_ADESIRED_RXTSP = { 0x0409, 15, 4, 0, "AGC_ADESIRED_RXTSP", "AGC_ADESIRED" }; +const struct LMS7Parameter RSSI_MODE = { 0x040A, 15, 14, 0, "RSSI_MODE", "" }; +const struct LMS7Parameter AGC_MODE_RXTSP = { 0x040A, 13, 12, 0, "AGC_MODE_RXTSP", "" }; +const struct LMS7Parameter AGC_AVG_RXTSP = { 0x040A, 2, 0, 0, "AGC_AVG_RXTSP", "AGC Averaging window size" }; +const struct LMS7Parameter DC_REG_RXTSP = { 0x040B, 15, 0, 0, "DC_REG_RXTSP", "" }; +const struct LMS7Parameter CMIX_GAIN_RXTSP = { 0x040C, 15, 14, 0, "CMIX_GAIN_RXTSP", "Gain of CMIX output" }; +const struct LMS7Parameter CMIX_SC_RXTSP = { 0x040C, 13, 13, 0, "CMIX_SC_RXTSP", "Spectrum control of CMIX" }; +const struct LMS7Parameter CMIX_BYP_RXTSP = { 0x040C, 7, 7, 0, "CMIX_BYP_RXTSP", "CMIX bypass" }; +const struct LMS7Parameter AGC_BYP_RXTSP = { 0x040C, 6, 6, 0, "AGC_BYP_RXTSP", "AGC bypass" }; +const struct LMS7Parameter GFIR3_BYP_RXTSP = { 0x040C, 5, 5, 0, "GFIR3_BYP_RXTSP", "GFIR3 bypass" }; +const struct LMS7Parameter GFIR2_BYP_RXTSP = { 0x040C, 4, 4, 0, "GFIR2_BYP_RXTSP", "GFIR2 bypass" }; +const struct LMS7Parameter GFIR1_BYP_RXTSP = { 0x040C, 3, 3, 0, "GFIR1_BYP_RXTSP", "GFIR1 bypass" }; +const struct LMS7Parameter DC_BYP_RXTSP = { 0x040C, 2, 2, 0, "DC_BYP_RXTSP", "DC corrector bypass" }; +const struct LMS7Parameter GC_BYP_RXTSP = { 0x040C, 1, 1, 0, "GC_BYP_RXTSP", "Gain corrector bypass" }; +const struct LMS7Parameter PH_BYP_RXTSP = { 0x040C, 0, 0, 0, "PH_BYP_RXTSP", "Phase corrector bypass" }; +const struct LMS7Parameter CAPD = { 0x040E, 31, 0, 0, "CAPD", "" }; +const struct LMS7Parameter DTHBIT_RX = { 0x0440, 8, 5, 1, "DTHBIT_RX", "NCO bits to dither" }; +const struct LMS7Parameter SEL_RX = { 0x0440, 4, 1, 0, "SEL_RX", "" }; +const struct LMS7Parameter MODE_RX = { 0x0440, 0, 0, 0, "MODE_RX", "" }; diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/LMS7002M_parameters.h b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/LMS7002M_parameters.h new file mode 100644 index 0000000000..3fc4e0be6b --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/LMS7002M_parameters.h @@ -0,0 +1,613 @@ +/** +@file LMS7002M_parameters.h +@author Lime Microsystems (www.limemicro.com) +@brief List of LMS7002M transceiver control parameters +*/ + +#ifndef LMS7002M_PARAMETERS_H +#define LMS7002M_PARAMETERS_H + +#include "typedefs.h" +#include + +struct LMS7Parameter; +extern std::vector LMS7parameterList; + +struct LMS7Parameter +{ + LMS7Parameter() : address(0), msb(0), lsb(0), defaultValue(0), name(nullptr), tooltip(nullptr) + { + } + + LMS7Parameter(uint16_t address, uint8_t msb, uint8_t lsb, uint16_t defaultValue, const char *name, const char* tooltip) + : address(address), msb(msb), lsb(lsb), defaultValue(defaultValue), name(name), tooltip(tooltip) + { + LMS7parameterList.push_back(this); + } + + uint16_t address; + uint8_t msb; + uint8_t lsb; + uint16_t defaultValue; + const char* name; + const char* tooltip; + inline bool operator==(const LMS7Parameter& obj) + { + if (address == obj.address && msb == obj.msb && lsb == obj.lsb) + return true; + return false; + }; +}; + +extern const struct LMS7Parameter LRST_TX_B; +extern const struct LMS7Parameter MRST_TX_B; +extern const struct LMS7Parameter LRST_TX_A; +extern const struct LMS7Parameter MRST_TX_A; +extern const struct LMS7Parameter LRST_RX_B; +extern const struct LMS7Parameter MRST_RX_B; +extern const struct LMS7Parameter LRST_RX_A; +extern const struct LMS7Parameter MRST_RX_A; +extern const struct LMS7Parameter SRST_RXFIFO; +extern const struct LMS7Parameter SRST_TXFIFO; +extern const struct LMS7Parameter RXEN_B; +extern const struct LMS7Parameter RXEN_A; +extern const struct LMS7Parameter TXEN_B; +extern const struct LMS7Parameter TXEN_A; +extern const struct LMS7Parameter MAC; +extern const struct LMS7Parameter TX_CLK_PE; +extern const struct LMS7Parameter RX_CLK_PE; +extern const struct LMS7Parameter SDA_PE; +extern const struct LMS7Parameter SDA_DS; +extern const struct LMS7Parameter SCL_PE; +extern const struct LMS7Parameter SCL_DS; +extern const struct LMS7Parameter SDIO_DS; +extern const struct LMS7Parameter SDIO_PE; +extern const struct LMS7Parameter SDO_PE; +extern const struct LMS7Parameter SCLK_PE; +extern const struct LMS7Parameter SEN_PE; +extern const struct LMS7Parameter SPIMODE; +extern const struct LMS7Parameter DIQ2_DS; +extern const struct LMS7Parameter DIQ2_PE; +extern const struct LMS7Parameter IQ_SEL_EN_2_PE; +extern const struct LMS7Parameter TXNRX2_PE; +extern const struct LMS7Parameter FCLK2_PE; +extern const struct LMS7Parameter MCLK2_PE; +extern const struct LMS7Parameter DIQ1_DS; +extern const struct LMS7Parameter DIQ1_PE; +extern const struct LMS7Parameter IQ_SEL_EN_1_PE; +extern const struct LMS7Parameter TXNRX1_PE; +extern const struct LMS7Parameter FCLK1_PE; +extern const struct LMS7Parameter MCLK1_PE; +extern const struct LMS7Parameter DIQDIRCTR2; +extern const struct LMS7Parameter DIQDIR2; +extern const struct LMS7Parameter DIQDIRCTR1; +extern const struct LMS7Parameter DIQDIR1; +extern const struct LMS7Parameter ENABLEDIRCTR2; +extern const struct LMS7Parameter ENABLEDIR2; +extern const struct LMS7Parameter ENABLEDIRCTR1; +extern const struct LMS7Parameter ENABLEDIR1; +extern const struct LMS7Parameter MOD_EN; +extern const struct LMS7Parameter LML2_FIDM; +extern const struct LMS7Parameter LML2_TXNRXIQ; +extern const struct LMS7Parameter LML2_MODE; +extern const struct LMS7Parameter LML1_FIDM; +extern const struct LMS7Parameter LML1_TXNRXIQ; +extern const struct LMS7Parameter LML1_MODE; +extern const struct LMS7Parameter LML1_S3S; +extern const struct LMS7Parameter LML1_S2S; +extern const struct LMS7Parameter LML1_S1S; +extern const struct LMS7Parameter LML1_S0S; +extern const struct LMS7Parameter LML1_BQP; +extern const struct LMS7Parameter LML1_BIP; +extern const struct LMS7Parameter LML1_AQP; +extern const struct LMS7Parameter LML1_AIP; +extern const struct LMS7Parameter LML1_BB2RF_PST; +extern const struct LMS7Parameter LML1_BB2RF_PRE; +extern const struct LMS7Parameter LML1_RF2BB_PST; +extern const struct LMS7Parameter LML1_RF2BB_PRE; +extern const struct LMS7Parameter LML2_S3S; +extern const struct LMS7Parameter LML2_S2S; +extern const struct LMS7Parameter LML2_S1S; +extern const struct LMS7Parameter LML2_S0S; +extern const struct LMS7Parameter LML2_BQP; +extern const struct LMS7Parameter LML2_BIP; +extern const struct LMS7Parameter LML2_AQP; +extern const struct LMS7Parameter LML2_AIP; +extern const struct LMS7Parameter LML2_BB2RF_PST; +extern const struct LMS7Parameter LML2_BB2RF_PRE; +extern const struct LMS7Parameter LML2_RF2BB_PST; +extern const struct LMS7Parameter LML2_RF2BB_PRE; +extern const struct LMS7Parameter FCLK2_DLY; +extern const struct LMS7Parameter FCLK1_DLY; +extern const struct LMS7Parameter RX_MUX; +extern const struct LMS7Parameter TX_MUX; +extern const struct LMS7Parameter TXRDCLK_MUX; +extern const struct LMS7Parameter TXWRCLK_MUX; +extern const struct LMS7Parameter RXRDCLK_MUX; +extern const struct LMS7Parameter RXWRCLK_MUX; +extern const struct LMS7Parameter FCLK2_INV; +extern const struct LMS7Parameter FCLK1_INV; +extern const struct LMS7Parameter MCLK2DLY; +extern const struct LMS7Parameter MCLK1DLY; +extern const struct LMS7Parameter MCLK2SRC; +extern const struct LMS7Parameter MCLK1SRC; +extern const struct LMS7Parameter TXDIVEN; +extern const struct LMS7Parameter RXDIVEN; +extern const struct LMS7Parameter TXTSPCLKA_DIV; +extern const struct LMS7Parameter RXTSPCLKA_DIV; +extern const struct LMS7Parameter MIMO_SISO; +extern const struct LMS7Parameter VER; +extern const struct LMS7Parameter REV; +extern const struct LMS7Parameter MASK; +extern const struct LMS7Parameter EN_DIR_LDO; +extern const struct LMS7Parameter EN_DIR_CGEN; +extern const struct LMS7Parameter EN_DIR_XBUF; +extern const struct LMS7Parameter EN_DIR_AFE; +extern const struct LMS7Parameter ISEL_DAC_AFE; +extern const struct LMS7Parameter MODE_INTERLEAVE_AFE; +extern const struct LMS7Parameter MUX_AFE_1; +extern const struct LMS7Parameter MUX_AFE_2; +extern const struct LMS7Parameter PD_AFE; +extern const struct LMS7Parameter PD_RX_AFE1; +extern const struct LMS7Parameter PD_RX_AFE2; +extern const struct LMS7Parameter PD_TX_AFE1; +extern const struct LMS7Parameter PD_TX_AFE2; +extern const struct LMS7Parameter EN_G_AFE; +extern const struct LMS7Parameter MUX_BIAS_OUT; +extern const struct LMS7Parameter RP_CALIB_BIAS; +extern const struct LMS7Parameter PD_FRP_BIAS; +extern const struct LMS7Parameter PD_F_BIAS; +extern const struct LMS7Parameter PD_PTRP_BIAS; +extern const struct LMS7Parameter PD_PT_BIAS; +extern const struct LMS7Parameter PD_BIAS_MASTER; +extern const struct LMS7Parameter SLFB_XBUF_RX; +extern const struct LMS7Parameter SLFB_XBUF_TX; +extern const struct LMS7Parameter BYP_XBUF_RX; +extern const struct LMS7Parameter BYP_XBUF_TX; +extern const struct LMS7Parameter EN_OUT2_XBUF_TX; +extern const struct LMS7Parameter EN_TBUFIN_XBUF_RX; +extern const struct LMS7Parameter PD_XBUF_RX; +extern const struct LMS7Parameter PD_XBUF_TX; +extern const struct LMS7Parameter EN_G_XBUF; +extern const struct LMS7Parameter SPDUP_VCO_CGEN; +extern const struct LMS7Parameter RESET_N_CGEN; +extern const struct LMS7Parameter EN_ADCCLKH_CLKGN; +extern const struct LMS7Parameter EN_COARSE_CKLGEN; +extern const struct LMS7Parameter EN_INTONLY_SDM_CGEN; +extern const struct LMS7Parameter EN_SDM_CLK_CGEN; +extern const struct LMS7Parameter PD_CP_CGEN; +extern const struct LMS7Parameter PD_FDIV_FB_CGEN; +extern const struct LMS7Parameter PD_FDIV_O_CGEN; +extern const struct LMS7Parameter PD_SDM_CGEN; +extern const struct LMS7Parameter PD_VCO_CGEN; +extern const struct LMS7Parameter PD_VCO_COMP_CGEN; +extern const struct LMS7Parameter EN_G_CGEN; +extern const struct LMS7Parameter FRAC_SDM_CGEN_LSB; +extern const struct LMS7Parameter INT_SDM_CGEN; +extern const struct LMS7Parameter FRAC_SDM_CGEN_MSB; +extern const struct LMS7Parameter REV_SDMCLK_CGEN; +extern const struct LMS7Parameter SEL_SDMCLK_CGEN; +extern const struct LMS7Parameter SX_DITHER_EN_CGEN; +extern const struct LMS7Parameter CLKH_OV_CLKL_CGEN; +extern const struct LMS7Parameter DIV_OUTCH_CGEN; +extern const struct LMS7Parameter TST_CGEN; +extern const struct LMS7Parameter REV_CLKDAC_CGEN; +extern const struct LMS7Parameter CMPLO_CTRL_CGEN; +extern const struct LMS7Parameter REV_CLKADC_CGEN; +extern const struct LMS7Parameter REVPH_PFD_CGEN; +extern const struct LMS7Parameter IOFFSET_CP_CGEN; +extern const struct LMS7Parameter IPULSE_CP_CGEN; +extern const struct LMS7Parameter ICT_VCO_CGEN; +extern const struct LMS7Parameter CSW_VCO_CGEN; +extern const struct LMS7Parameter COARSE_START_CGEN; +extern const struct LMS7Parameter COARSE_STEPDONE_CGEN; +extern const struct LMS7Parameter COARSEPLL_COMPO_CGEN; +extern const struct LMS7Parameter VCO_CMPHO_CGEN; +extern const struct LMS7Parameter VCO_CMPLO_CGEN; +extern const struct LMS7Parameter CP2_CGEN; +extern const struct LMS7Parameter CP3_CGEN; +extern const struct LMS7Parameter CZ_CGEN; +extern const struct LMS7Parameter EN_LDO_DIG; +extern const struct LMS7Parameter EN_LDO_DIGGN; +extern const struct LMS7Parameter EN_LDO_DIGSXR; +extern const struct LMS7Parameter EN_LDO_DIGSXT; +extern const struct LMS7Parameter EN_LDO_DIVGN; +extern const struct LMS7Parameter EN_LDO_DIVSXR; +extern const struct LMS7Parameter EN_LDO_DIVSXT; +extern const struct LMS7Parameter EN_LDO_LNA12; +extern const struct LMS7Parameter EN_LDO_LNA14; +extern const struct LMS7Parameter EN_LDO_MXRFE; +extern const struct LMS7Parameter EN_LDO_RBB; +extern const struct LMS7Parameter EN_LDO_RXBUF; +extern const struct LMS7Parameter EN_LDO_TBB; +extern const struct LMS7Parameter EN_LDO_TIA12; +extern const struct LMS7Parameter EN_LDO_TIA14; +extern const struct LMS7Parameter EN_G_LDO; +extern const struct LMS7Parameter EN_LOADIMP_LDO_TLOB; +extern const struct LMS7Parameter EN_LOADIMP_LDO_TPAD; +extern const struct LMS7Parameter EN_LOADIMP_LDO_TXBUF; +extern const struct LMS7Parameter EN_LOADIMP_LDO_VCOGN; +extern const struct LMS7Parameter EN_LOADIMP_LDO_VCOSXR; +extern const struct LMS7Parameter EN_LOADIMP_LDO_VCOSXT; +extern const struct LMS7Parameter EN_LDO_AFE; +extern const struct LMS7Parameter EN_LDO_CPGN; +extern const struct LMS7Parameter EN_LDO_CPSXR; +extern const struct LMS7Parameter EN_LDO_TLOB; +extern const struct LMS7Parameter EN_LDO_TPAD; +extern const struct LMS7Parameter EN_LDO_TXBUF; +extern const struct LMS7Parameter EN_LDO_VCOGN; +extern const struct LMS7Parameter EN_LDO_VCOSXR; +extern const struct LMS7Parameter EN_LDO_VCOSXT; +extern const struct LMS7Parameter EN_LDO_CPSXT; +extern const struct LMS7Parameter EN_LOADIMP_LDO_CPSXT; +extern const struct LMS7Parameter EN_LOADIMP_LDO_DIG; +extern const struct LMS7Parameter EN_LOADIMP_LDO_DIGGN; +extern const struct LMS7Parameter EN_LOADIMP_LDO_DIGSXR; +extern const struct LMS7Parameter EN_LOADIMP_LDO_DIGSXT; +extern const struct LMS7Parameter EN_LOADIMP_LDO_DIVGN; +extern const struct LMS7Parameter EN_LOADIMP_LDO_DIVSXR; +extern const struct LMS7Parameter EN_LOADIMP_LDO_DIVSXT; +extern const struct LMS7Parameter EN_LOADIMP_LDO_LNA12; +extern const struct LMS7Parameter EN_LOADIMP_LDO_LNA14; +extern const struct LMS7Parameter EN_LOADIMP_LDO_MXRFE; +extern const struct LMS7Parameter EN_LOADIMP_LDO_RBB; +extern const struct LMS7Parameter EN_LOADIMP_LDO_RXBUF; +extern const struct LMS7Parameter EN_LOADIMP_LDO_TBB; +extern const struct LMS7Parameter EN_LOADIMP_LDO_TIA12; +extern const struct LMS7Parameter EN_LOADIMP_LDO_TIA14; +extern const struct LMS7Parameter BYP_LDO_TBB; +extern const struct LMS7Parameter BYP_LDO_TIA12; +extern const struct LMS7Parameter BYP_LDO_TIA14; +extern const struct LMS7Parameter BYP_LDO_TLOB; +extern const struct LMS7Parameter BYP_LDO_TPAD; +extern const struct LMS7Parameter BYP_LDO_TXBUF; +extern const struct LMS7Parameter BYP_LDO_VCOGN; +extern const struct LMS7Parameter BYP_LDO_VCOSXR; +extern const struct LMS7Parameter BYP_LDO_VCOSXT; +extern const struct LMS7Parameter EN_LOADIMP_LDO_AFE; +extern const struct LMS7Parameter EN_LOADIMP_LDO_CPGN; +extern const struct LMS7Parameter EN_LOADIMP_LDO_CPSXR; +extern const struct LMS7Parameter BYP_LDO_AFE; +extern const struct LMS7Parameter BYP_LDO_CPGN; +extern const struct LMS7Parameter BYP_LDO_CPSXR; +extern const struct LMS7Parameter BYP_LDO_CPSXT; +extern const struct LMS7Parameter BYP_LDO_DIG; +extern const struct LMS7Parameter BYP_LDO_DIGGN; +extern const struct LMS7Parameter BYP_LDO_DIGSXR; +extern const struct LMS7Parameter BYP_LDO_DIGSXT; +extern const struct LMS7Parameter BYP_LDO_DIVGN; +extern const struct LMS7Parameter BYP_LDO_DIVSXR; +extern const struct LMS7Parameter BYP_LDO_DIVSXT; +extern const struct LMS7Parameter BYP_LDO_LNA12; +extern const struct LMS7Parameter BYP_LDO_LNA14; +extern const struct LMS7Parameter BYP_LDO_MXRFE; +extern const struct LMS7Parameter BYP_LDO_RBB; +extern const struct LMS7Parameter BYP_LDO_RXBUF; +extern const struct LMS7Parameter SPDUP_LDO_DIVSXR; +extern const struct LMS7Parameter SPDUP_LDO_DIVSXT; +extern const struct LMS7Parameter SPDUP_LDO_LNA12; +extern const struct LMS7Parameter SPDUP_LDO_LNA14; +extern const struct LMS7Parameter SPDUP_LDO_MXRFE; +extern const struct LMS7Parameter SPDUP_LDO_RBB; +extern const struct LMS7Parameter SPDUP_LDO_RXBUF; +extern const struct LMS7Parameter SPDUP_LDO_TBB; +extern const struct LMS7Parameter SPDUP_LDO_TIA12; +extern const struct LMS7Parameter SPDUP_LDO_TIA14; +extern const struct LMS7Parameter SPDUP_LDO_TLOB; +extern const struct LMS7Parameter SPDUP_LDO_TPAD; +extern const struct LMS7Parameter SPDUP_LDO_TXBUF; +extern const struct LMS7Parameter SPDUP_LDO_VCOGN; +extern const struct LMS7Parameter SPDUP_LDO_VCOSXR; +extern const struct LMS7Parameter SPDUP_LDO_VCOSXT; +extern const struct LMS7Parameter SPDUP_LDO_AFE; +extern const struct LMS7Parameter SPDUP_LDO_CPGN; +extern const struct LMS7Parameter SPDUP_LDO_CPSXR; +extern const struct LMS7Parameter SPDUP_LDO_CPSXT; +extern const struct LMS7Parameter SPDUP_LDO_DIG; +extern const struct LMS7Parameter SPDUP_LDO_DIGGN; +extern const struct LMS7Parameter SPDUP_LDO_DIGSXR; +extern const struct LMS7Parameter SPDUP_LDO_DIGSXT; +extern const struct LMS7Parameter SPDUP_LDO_DIVGN; +extern const struct LMS7Parameter RDIV_VCOSXR; +extern const struct LMS7Parameter RDIV_VCOSXT; +extern const struct LMS7Parameter RDIV_TXBUF; +extern const struct LMS7Parameter RDIV_VCOGN; +extern const struct LMS7Parameter RDIV_TLOB; +extern const struct LMS7Parameter RDIV_TPAD; +extern const struct LMS7Parameter RDIV_TIA12; +extern const struct LMS7Parameter RDIV_TIA14; +extern const struct LMS7Parameter RDIV_RXBUF; +extern const struct LMS7Parameter RDIV_TBB; +extern const struct LMS7Parameter RDIV_MXRFE; +extern const struct LMS7Parameter RDIV_RBB; +extern const struct LMS7Parameter RDIV_LNA12; +extern const struct LMS7Parameter RDIV_LNA14; +extern const struct LMS7Parameter RDIV_DIVSXR; +extern const struct LMS7Parameter RDIV_DIVSXT; +extern const struct LMS7Parameter RDIV_DIGSXT; +extern const struct LMS7Parameter RDIV_DIVGN; +extern const struct LMS7Parameter RDIV_DIGGN; +extern const struct LMS7Parameter RDIV_DIGSXR; +extern const struct LMS7Parameter RDIV_CPSXT; +extern const struct LMS7Parameter RDIV_DIG; +extern const struct LMS7Parameter RDIV_CPGN; +extern const struct LMS7Parameter RDIV_CPSXR; +extern const struct LMS7Parameter RDIV_SPIBUF; +extern const struct LMS7Parameter RDIV_AFE; +extern const struct LMS7Parameter SPDUP_LDO_SPIBUF; +extern const struct LMS7Parameter SPDUP_LDO_DIGIp2; +extern const struct LMS7Parameter SPDUP_LDO_DIGIp1; +extern const struct LMS7Parameter BYP_LDO_SPIBUF; +extern const struct LMS7Parameter BYP_LDO_DIGIp2; +extern const struct LMS7Parameter BYP_LDO_DIGIp1; +extern const struct LMS7Parameter EN_LOADIMP_LDO_SPIBUF; +extern const struct LMS7Parameter EN_LOADIMP_LDO_DIGIp2; +extern const struct LMS7Parameter EN_LOADIMP_LDO_DIGIp1; +extern const struct LMS7Parameter PD_LDO_SPIBUF; +extern const struct LMS7Parameter PD_LDO_DIGIp2; +extern const struct LMS7Parameter PD_LDO_DIGIp1; +extern const struct LMS7Parameter EN_G_LDOP; +extern const struct LMS7Parameter RDIV_DIGIp2; +extern const struct LMS7Parameter RDIV_DIGIp1; +extern const struct LMS7Parameter BSIGT; +extern const struct LMS7Parameter BSTATE; +extern const struct LMS7Parameter EN_SDM_TSTO_SXT; +extern const struct LMS7Parameter EN_SDM_TSTO_SXR; +extern const struct LMS7Parameter EN_SDM_TSTO_CGEN; +extern const struct LMS7Parameter BENC; +extern const struct LMS7Parameter BENR; +extern const struct LMS7Parameter BENT; +extern const struct LMS7Parameter BSTART; +extern const struct LMS7Parameter BSIGR; +extern const struct LMS7Parameter BSIGC; +extern const struct LMS7Parameter CDS_MCLK2; +extern const struct LMS7Parameter CDS_MCLK1; +extern const struct LMS7Parameter CDSN_TXBTSP; +extern const struct LMS7Parameter CDSN_TXATSP; +extern const struct LMS7Parameter CDSN_RXBTSP; +extern const struct LMS7Parameter CDSN_RXATSP; +extern const struct LMS7Parameter CDSN_TXBLML; +extern const struct LMS7Parameter CDSN_TXALML; +extern const struct LMS7Parameter CDSN_RXBLML; +extern const struct LMS7Parameter CDSN_RXALML; +extern const struct LMS7Parameter CDSN_MCLK2; +extern const struct LMS7Parameter CDSN_MCLK1; +extern const struct LMS7Parameter CDS_TXBTSP; +extern const struct LMS7Parameter CDS_TXATSP; +extern const struct LMS7Parameter CDS_RXBTSP; +extern const struct LMS7Parameter CDS_RXATSP; +extern const struct LMS7Parameter CDS_TXBLML; +extern const struct LMS7Parameter CDS_TXALML; +extern const struct LMS7Parameter CDS_RXBLML; +extern const struct LMS7Parameter CDS_RXALML; +extern const struct LMS7Parameter EN_LOWBWLOMX_TMX_TRF; +extern const struct LMS7Parameter EN_NEXTTX_TRF; +extern const struct LMS7Parameter EN_AMPHF_PDET_TRF; +extern const struct LMS7Parameter LOADR_PDET_TRF; +extern const struct LMS7Parameter PD_PDET_TRF; +extern const struct LMS7Parameter PD_TLOBUF_TRF; +extern const struct LMS7Parameter PD_TXPAD_TRF; +extern const struct LMS7Parameter EN_G_TRF; +extern const struct LMS7Parameter F_TXPAD_TRF; +extern const struct LMS7Parameter L_LOOPB_TXPAD_TRF; +extern const struct LMS7Parameter LOSS_LIN_TXPAD_TRF; +extern const struct LMS7Parameter LOSS_MAIN_TXPAD_TRF; +extern const struct LMS7Parameter EN_LOOPB_TXPAD_TRF; +extern const struct LMS7Parameter GCAS_GNDREF_TXPAD_TRF; +extern const struct LMS7Parameter ICT_LIN_TXPAD_TRF; +extern const struct LMS7Parameter ICT_MAIN_TXPAD_TRF; +extern const struct LMS7Parameter VGCAS_TXPAD_TRF; +extern const struct LMS7Parameter SEL_BAND1_TRF; +extern const struct LMS7Parameter SEL_BAND2_TRF; +extern const struct LMS7Parameter LOBIASN_TXM_TRF; +extern const struct LMS7Parameter LOBIASP_TXX_TRF; +extern const struct LMS7Parameter CDC_I_TRF; +extern const struct LMS7Parameter CDC_Q_TRF; +extern const struct LMS7Parameter STATPULSE_TBB; +extern const struct LMS7Parameter LOOPB_TBB; +extern const struct LMS7Parameter PD_LPFH_TBB; +extern const struct LMS7Parameter PD_LPFIAMP_TBB; +extern const struct LMS7Parameter PD_LPFLAD_TBB; +extern const struct LMS7Parameter PD_LPFS5_TBB; +extern const struct LMS7Parameter EN_G_TBB; +extern const struct LMS7Parameter ICT_LPFS5_F_TBB; +extern const struct LMS7Parameter ICT_LPFS5_PT_TBB; +extern const struct LMS7Parameter ICT_LPF_H_PT_TBB; +extern const struct LMS7Parameter ICT_LPFH_F_TBB; +extern const struct LMS7Parameter ICT_LPFLAD_F_TBB; +extern const struct LMS7Parameter ICT_LPFLAD_PT_TBB; +extern const struct LMS7Parameter CG_IAMP_TBB; +extern const struct LMS7Parameter ICT_IAMP_FRP_TBB; +extern const struct LMS7Parameter ICT_IAMP_GG_FRP_TBB; +extern const struct LMS7Parameter RCAL_LPFH_TBB; +extern const struct LMS7Parameter RCAL_LPFLAD_TBB; +extern const struct LMS7Parameter TSTIN_TBB; +extern const struct LMS7Parameter BYPLADDER_TBB; +extern const struct LMS7Parameter CCAL_LPFLAD_TBB; +extern const struct LMS7Parameter RCAL_LPFS5_TBB; +extern const struct LMS7Parameter CDC_I_RFE; +extern const struct LMS7Parameter CDC_Q_RFE; +extern const struct LMS7Parameter PD_LNA_RFE; +extern const struct LMS7Parameter PD_RLOOPB_1_RFE; +extern const struct LMS7Parameter PD_RLOOPB_2_RFE; +extern const struct LMS7Parameter PD_MXLOBUF_RFE; +extern const struct LMS7Parameter PD_QGEN_RFE; +extern const struct LMS7Parameter PD_RSSI_RFE; +extern const struct LMS7Parameter PD_TIA_RFE; +extern const struct LMS7Parameter EN_G_RFE; +extern const struct LMS7Parameter SEL_PATH_RFE; +extern const struct LMS7Parameter EN_DCOFF_RXFE_RFE; +extern const struct LMS7Parameter EN_INSHSW_LB1_RFE; +extern const struct LMS7Parameter EN_INSHSW_LB2_RFE; +extern const struct LMS7Parameter EN_INSHSW_L_RFE; +extern const struct LMS7Parameter EN_INSHSW_W_RFE; +extern const struct LMS7Parameter EN_NEXTRX_RFE; +extern const struct LMS7Parameter DCOFFI_RFE; +extern const struct LMS7Parameter DCOFFQ_RFE; +extern const struct LMS7Parameter ICT_LOOPB_RFE; +extern const struct LMS7Parameter ICT_TIAMAIN_RFE; +extern const struct LMS7Parameter ICT_TIAOUT_RFE; +extern const struct LMS7Parameter ICT_LNACMO_RFE; +extern const struct LMS7Parameter ICT_LNA_RFE; +extern const struct LMS7Parameter ICT_LODC_RFE; +extern const struct LMS7Parameter CAP_RXMXO_RFE; +extern const struct LMS7Parameter CGSIN_LNA_RFE; +extern const struct LMS7Parameter CCOMP_TIA_RFE; +extern const struct LMS7Parameter CFB_TIA_RFE; +extern const struct LMS7Parameter G_LNA_RFE; +extern const struct LMS7Parameter G_RXLOOPB_RFE; +extern const struct LMS7Parameter G_TIA_RFE; +extern const struct LMS7Parameter RCOMP_TIA_RFE; +extern const struct LMS7Parameter RFB_TIA_RFE; +extern const struct LMS7Parameter EN_LB_LPFH_RBB; +extern const struct LMS7Parameter EN_LB_LPFL_RBB; +extern const struct LMS7Parameter PD_LPFH_RBB; +extern const struct LMS7Parameter PD_LPFL_RBB; +extern const struct LMS7Parameter PD_PGA_RBB; +extern const struct LMS7Parameter EN_G_RBB; +extern const struct LMS7Parameter R_CTL_LPF_RBB; +extern const struct LMS7Parameter RCC_CTL_LPFH_RBB; +extern const struct LMS7Parameter C_CTL_LPFH_RBB; +extern const struct LMS7Parameter RCC_CTL_LPFL_RBB; +extern const struct LMS7Parameter C_CTL_LPFL_RBB; +extern const struct LMS7Parameter INPUT_CTL_PGA_RBB; +extern const struct LMS7Parameter ICT_LPF_IN_RBB; +extern const struct LMS7Parameter ICT_LPF_OUT_RBB; +extern const struct LMS7Parameter OSW_PGA_RBB; +extern const struct LMS7Parameter ICT_PGA_OUT_RBB; +extern const struct LMS7Parameter ICT_PGA_IN_RBB; +extern const struct LMS7Parameter G_PGA_RBB; +extern const struct LMS7Parameter RCC_CTL_PGA_RBB; +extern const struct LMS7Parameter C_CTL_PGA_RBB; +extern const struct LMS7Parameter RESET_N; +extern const struct LMS7Parameter SPDUP_VCO; +extern const struct LMS7Parameter BYPLDO_VCO; +extern const struct LMS7Parameter EN_COARSEPLL; +extern const struct LMS7Parameter CURLIM_VCO; +extern const struct LMS7Parameter EN_DIV2_DIVPROG; +extern const struct LMS7Parameter EN_INTONLY_SDM; +extern const struct LMS7Parameter EN_SDM_CLK; +extern const struct LMS7Parameter PD_FBDIV; +extern const struct LMS7Parameter PD_LOCH_T2RBUF; +extern const struct LMS7Parameter PD_CP; +extern const struct LMS7Parameter PD_FDIV; +extern const struct LMS7Parameter PD_SDM; +extern const struct LMS7Parameter PD_VCO_COMP; +extern const struct LMS7Parameter PD_VCO; +extern const struct LMS7Parameter EN_G; +extern const struct LMS7Parameter FRAC_SDM_LSB; +extern const struct LMS7Parameter INT_SDM; +extern const struct LMS7Parameter FRAC_SDM_MSB; +extern const struct LMS7Parameter PW_DIV2_LOCH; +extern const struct LMS7Parameter PW_DIV4_LOCH; +extern const struct LMS7Parameter DIV_LOCH; +extern const struct LMS7Parameter TST_SX; +extern const struct LMS7Parameter SEL_SDMCLK; +extern const struct LMS7Parameter SX_DITHER_EN; +extern const struct LMS7Parameter REV_SDMCLK; +extern const struct LMS7Parameter VDIV_VCO; +extern const struct LMS7Parameter ICT_VCO; +extern const struct LMS7Parameter RSEL_LDO_VCO; +extern const struct LMS7Parameter CSW_VCO; +extern const struct LMS7Parameter SEL_VCO; +extern const struct LMS7Parameter COARSE_START; +extern const struct LMS7Parameter REVPH_PFD; +extern const struct LMS7Parameter IOFFSET_CP; +extern const struct LMS7Parameter IPULSE_CP; +extern const struct LMS7Parameter COARSE_STEPDONE; +extern const struct LMS7Parameter COARSEPLL_COMPO; +extern const struct LMS7Parameter VCO_CMPHO; +extern const struct LMS7Parameter VCO_CMPLO; +extern const struct LMS7Parameter CP2_PLL; +extern const struct LMS7Parameter CP3_PLL; +extern const struct LMS7Parameter CZ; +extern const struct LMS7Parameter EN_DIR_SXRSXT; +extern const struct LMS7Parameter EN_DIR_RBB; +extern const struct LMS7Parameter EN_DIR_RFE; +extern const struct LMS7Parameter EN_DIR_TBB; +extern const struct LMS7Parameter EN_DIR_TRF; +extern const struct LMS7Parameter TSGFC_TXTSP; +extern const struct LMS7Parameter TSGFCW_TXTSP; +extern const struct LMS7Parameter TSGDCLDQ_TXTSP; +extern const struct LMS7Parameter TSGDCLDI_TXTSP; +extern const struct LMS7Parameter TSGSWAPIQ_TXTSP; +extern const struct LMS7Parameter TSGMODE_TXTSP; +extern const struct LMS7Parameter INSEL_TXTSP; +extern const struct LMS7Parameter BSTART_TXTSP; +extern const struct LMS7Parameter EN_TXTSP; +extern const struct LMS7Parameter GCORRQ_TXTSP; +extern const struct LMS7Parameter GCORRI_TXTSP; +extern const struct LMS7Parameter HBI_OVR_TXTSP; +extern const struct LMS7Parameter IQCORR_TXTSP; +extern const struct LMS7Parameter DCCORRI_TXTSP; +extern const struct LMS7Parameter DCCORRQ_TXTSP; +extern const struct LMS7Parameter GFIR1_L_TXTSP; +extern const struct LMS7Parameter GFIR1_N_TXTSP; +extern const struct LMS7Parameter GFIR2_L_TXTSP; +extern const struct LMS7Parameter GFIR2_N_TXTSP; +extern const struct LMS7Parameter GFIR3_L_TXTSP; +extern const struct LMS7Parameter GFIR3_N_TXTSP; +extern const struct LMS7Parameter CMIX_GAIN_TXTSP; +extern const struct LMS7Parameter CMIX_SC_TXTSP; +extern const struct LMS7Parameter CMIX_BYP_TXTSP; +extern const struct LMS7Parameter ISINC_BYP_TXTSP; +extern const struct LMS7Parameter GFIR3_BYP_TXTSP; +extern const struct LMS7Parameter GFIR2_BYP_TXTSP; +extern const struct LMS7Parameter GFIR1_BYP_TXTSP; +extern const struct LMS7Parameter DC_BYP_TXTSP; +extern const struct LMS7Parameter GC_BYP_TXTSP; +extern const struct LMS7Parameter PH_BYP_TXTSP; +extern const struct LMS7Parameter BSIGI_TXTSP; +extern const struct LMS7Parameter BSTATE_TXTSP; +extern const struct LMS7Parameter BSIGQ_TXTSP; +extern const struct LMS7Parameter DC_REG_TXTSP; +extern const struct LMS7Parameter DTHBIT_TX; +extern const struct LMS7Parameter SEL_TX; +extern const struct LMS7Parameter MODE_TX; +extern const struct LMS7Parameter CAPTURE; +extern const struct LMS7Parameter CAPSEL; +extern const struct LMS7Parameter CAPSEL_ADC; +extern const struct LMS7Parameter TSGFC_RXTSP; +extern const struct LMS7Parameter TSGFCW_RXTSP; +extern const struct LMS7Parameter TSGDCLDQ_RXTSP; +extern const struct LMS7Parameter TSGDCLDI_RXTSP; +extern const struct LMS7Parameter TSGSWAPIQ_RXTSP; +extern const struct LMS7Parameter TSGMODE_RXTSP; +extern const struct LMS7Parameter INSEL_RXTSP; +extern const struct LMS7Parameter BSTART_RXTSP; +extern const struct LMS7Parameter EN_RXTSP; +extern const struct LMS7Parameter GCORRQ_RXTSP; +extern const struct LMS7Parameter GCORRI_RXTSP; +extern const struct LMS7Parameter HBD_OVR_RXTSP; +extern const struct LMS7Parameter IQCORR_RXTSP; +extern const struct LMS7Parameter HBD_DLY; +extern const struct LMS7Parameter DCLOOP_BYP; +extern const struct LMS7Parameter DCCORR_AVG_RXTSP; +extern const struct LMS7Parameter GFIR1_L_RXTSP; +extern const struct LMS7Parameter GFIR1_N_RXTSP; +extern const struct LMS7Parameter GFIR2_L_RXTSP; +extern const struct LMS7Parameter GFIR2_N_RXTSP; +extern const struct LMS7Parameter GFIR3_L_RXTSP; +extern const struct LMS7Parameter GFIR3_N_RXTSP; +extern const struct LMS7Parameter AGC_K_RXTSP; +extern const struct LMS7Parameter AGC_ADESIRED_RXTSP; +extern const struct LMS7Parameter RSSI_MODE; +extern const struct LMS7Parameter AGC_MODE_RXTSP; +extern const struct LMS7Parameter AGC_AVG_RXTSP; +extern const struct LMS7Parameter DC_REG_RXTSP; +extern const struct LMS7Parameter CMIX_GAIN_RXTSP; +extern const struct LMS7Parameter CMIX_SC_RXTSP; +extern const struct LMS7Parameter CMIX_BYP_RXTSP; +extern const struct LMS7Parameter AGC_BYP_RXTSP; +extern const struct LMS7Parameter GFIR3_BYP_RXTSP; +extern const struct LMS7Parameter GFIR2_BYP_RXTSP; +extern const struct LMS7Parameter GFIR1_BYP_RXTSP; +extern const struct LMS7Parameter DC_BYP_RXTSP; +extern const struct LMS7Parameter GC_BYP_RXTSP; +extern const struct LMS7Parameter PH_BYP_RXTSP; +extern const struct LMS7Parameter CAPD; +extern const struct LMS7Parameter DTHBIT_RX; +extern const struct LMS7Parameter SEL_RX; +extern const struct LMS7Parameter MODE_RX; + +#endif diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/LMS7002M_statuses.cpp b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/LMS7002M_statuses.cpp new file mode 100644 index 0000000000..4e00854e14 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/LMS7002M_statuses.cpp @@ -0,0 +1,16 @@ +/** +@file LMS7002M_statuses.cpp +@author Lime Microsystems (www.limemicro.com) +*/ + +#include "LMS7002M_statuses.h" + +const char* undefinedStatusStr = "undefined status"; + +const char* liblms7_status2string(liblms7_status status) +{ + if (status >= 0 && status < LIBLMS7_STATUS_COUNT) + return liblms7_status_strings[status]; + else + return undefinedStatusStr; +} diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/LMS7002M_statuses.h b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/LMS7002M_statuses.h new file mode 100644 index 0000000000..43b736bfd5 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/LMS7002M_statuses.h @@ -0,0 +1,48 @@ +/** +@file LMS7002M_statuses.h +@author Lime Microsystems (www.limemicro.com) +@brief LMS7002M control library statuses enumerations +*/ + +#ifndef LMS7API_STATUSES_H +#define LMS7API_STATUSES_H + +const char liblms7_status_strings[][64] = +{ +"success", +"failure", +"index out of range", +"too many values", +"connection manager is NULL", +"port not connected", +"frequency out of range", +"cannot deliver frequency", +"VCO is powered down", +"Bad SEL_PATH_RFE", +"Band not selected", +"file not found", +"file invalid format", +}; + +enum liblms7_status +{ + LIBLMS7_SUCCESS = 0, + LIBLMS7_FAILURE, + LIBLMS7_INDEX_OUT_OF_RANGE, + LIBLMS7_TOO_MANY_VALUES, + LIBLMS7_NO_CONNECTION_MANAGER, + LIBLMS7_NOT_CONNECTED, + LIBLMS7_FREQUENCY_OUT_OF_RANGE, + LIBLMS7_CANNOT_DELIVER_FREQUENCY, + LIBLMS7_VCO_IS_POWERED_DOWN, + LIBLMS7_BAD_SEL_PATH, + LIBLMS7_BAND_NOT_SELECTED, + LIBLMS7_FILE_NOT_FOUND, + LIBLMS7_FILE_INVALID_FORMAT, + + LIBLMS7_STATUS_COUNT +}; + +const char* liblms7_status2string(liblms7_status status); + +#endif diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/connectionManager/ConnectionCOM.cpp b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/connectionManager/ConnectionCOM.cpp new file mode 100644 index 0000000000..6c7fc0d829 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/connectionManager/ConnectionCOM.cpp @@ -0,0 +1,596 @@ +/** + @file ConnectionCOM.cpp + @author Lime Microsystems (www.limemicro.com) + @brief Implementation of communications through COM port +*/ + +#include "ConnectionCOM.h" + +#include "string.h" +#ifdef __unix__ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#endif // LINUX + +const int COM_RETRY_INTERVAL = 20; //ms +const int COM_TOTAL_TIMEOUT = 300; //ms + +/** @brief Initializes com port connection +*/ +ConnectionCOM::ConnectionCOM() +{ + currentDeviceIndex = -1; + connected = false; + comPortList.clear(); + m_deviceNames.clear(); + m_connectionType = COM_PORT; +#ifndef __unix__ + hComm = INVALID_HANDLE_VALUE; +#else + hComm = -1; +#endif + comBaudrate = 9600; +} + +/** @brief When object is destroyed it closes it's opened COM port +*/ +ConnectionCOM::~ConnectionCOM() +{ + Close(); +} + +/** @brief Opens connection to first found chip + @return 0-success +*/ +IConnection::DeviceStatus ConnectionCOM::Open() +{ + comPortList.clear(); + if(comPortList.size() == 0) + FindAllComPorts(); + + m_deviceNames.clear(); + if(m_deviceNames.size() == 0) + RefreshDeviceList(); + + for(unsigned int i=0; i 0 ) + { + comPortName = m_deviceNames[toOpen]; + IConnection::DeviceStatus status = Open(comPortName.c_str(), comBaudrate); + if( status == SUCCESS ) + currentDeviceIndex = toOpen; + return status; + } + return FAILURE; +} + +/** @brief Closes connection to chip +*/ +void ConnectionCOM::Close() +{ + connected = false; + currentDeviceIndex = -1; +#ifndef __unix__ + if (hComm != INVALID_HANDLE_VALUE) + { + SetCommTimeouts(hComm, &m_ctmoOld); + CloseHandle(hComm); + } + hComm = INVALID_HANDLE_VALUE; +#else + if( hComm >= 0) + { + close(hComm); + } + hComm = -1; +#endif +} + +/** @brief Returns whether chip is connected + @return chip is connected +*/ +bool ConnectionCOM::IsOpen() +{ +#ifndef __unix__ + if (hComm != INVALID_HANDLE_VALUE && TestConnectivity() ) + return true; +#else + if( hComm != -1 && TestConnectivity() ) + return true; +#endif + return false; +} + +int ConnectionCOM::GetOpenedIndex() +{ + return currentDeviceIndex; +} + +/** @brief Sends data through COM port + @param buffer data buffer to send + @param length size of data buffer + @param timeout_ms timeout limit for operation in milliseconds + @return Number of bytes sent +*/ +int ConnectionCOM::Write(const unsigned char *buffer, int length, int timeout_ms) +{ + if(timeout_ms == 0) + { + timeout_ms = COM_TOTAL_TIMEOUT; + } + int retryCount = 0; + const int maxRetries = (timeout_ms/COM_RETRY_INTERVAL) > 1 ? (timeout_ms/COM_RETRY_INTERVAL) : 1; + bool status = false; +#ifndef __unix__ + unsigned long bytesWriten = 0; + m_osWOverlap.InternalHigh = 0; + + for(int i = 0; iwrite("COM PORT: error writing data\n", LOG_ERROR); +// if(bytesWriten == 0) +// MessageLog::getInstance()->write("COM PORT: data bytes sent 0\n", LOG_WARNING); + status = false; + } + else + status = true; + ++retryCount; + } +#endif + if(bytesWriten == length) + status = true; + + return bytesWriten; +} + +/** @brief Reads data from COM port + @param buffer pointer to data buffer for receiving + @param length number of bytes to read + @param timeout_ms timeout limit for operation in milliseconds + @return Number of bytes received +*/ +int ConnectionCOM::Read(unsigned char *buffer, int length, int timeout_ms) +{ + if(timeout_ms == 0) + { + timeout_ms = COM_TOTAL_TIMEOUT; + } + int retryCount = 0; + const int maxRetries = (timeout_ms/COM_RETRY_INTERVAL) > 1 ? (timeout_ms/COM_RETRY_INTERVAL) : 1; + bool status = false; + + memset(buffer, 0, length); + long bytesReaded = 0; + unsigned long totalBytesReaded = 0; + char cRawData[COM_BUFFER_LENGTH]; + unsigned long bytesToRead = length; + + memset(cRawData, '\0', sizeof(cRawData[0])*COM_BUFFER_LENGTH); + + for(int i=0; iwrite("COM PORT: error reading data\n", LOG_ERROR); +// if(bytesReaded == 0) +// MessageLog::getInstance()->write("COM PORT: reading 0 bytes\n", LOG_WARNING); + status = false; + } +#endif + retryCount++; + + for(int j=0; jwrite(ss.str(), LOG_DATA); + +// if(retryCount == maxRetries) +// MessageLog::getInstance()->write("COM PORT: read data timeout\n", LOG_WARNING); +// +// if(totalBytesReaded > length) +// MessageLog::getInstance()->write("COM PORT: read data corrupted, received length > requested length\n", LOG_ERROR); + return totalBytesReaded; +} + +/** @brief Searches for available COM ports and adds them to list +*/ +void ConnectionCOM::FindAllComPorts() +{ + Close(); + comPortList.clear(); +#ifndef __unix__ + HKEY hSERIALCOMM; + if (RegOpenKeyEx(HKEY_LOCAL_MACHINE, TEXT("HARDWARE\\DEVICEMAP\\SERIALCOMM"), 0, KEY_QUERY_VALUE, &hSERIALCOMM) == ERROR_SUCCESS) + { + // Get the max value name and max value lengths + DWORD dwMaxValueNameLen; + DWORD dwMaxValueLen; + DWORD dwQueryInfo = RegQueryInfoKey(hSERIALCOMM, NULL, NULL, NULL, NULL, NULL, NULL, NULL, &dwMaxValueNameLen, &dwMaxValueLen, NULL, NULL); + if (dwQueryInfo == ERROR_SUCCESS) + { + DWORD dwMaxValueNameSizeInChars = dwMaxValueNameLen + 1; + // Include space for the NULL terminator + DWORD dwMaxValueNameSizeInBytes = dwMaxValueNameSizeInChars*sizeof(TCHAR); + DWORD dwMaxValueDataSizeInChars = dwMaxValueLen / sizeof(TCHAR) + 1; + // Include space for the NULL terminator + DWORD dwMaxValueDataSizeInBytes = dwMaxValueDataSizeInChars*sizeof(TCHAR); + + // Allocate some space for the value name and value data + TCHAR* szValueName = new TCHAR[dwMaxValueNameSizeInChars]; + TCHAR* byValue = new TCHAR[dwMaxValueDataSizeInBytes]; + if (szValueName && byValue) + { + // Enumerate all the values underneath HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\SERIALCOMM + DWORD dwIndex = 0; + DWORD dwType; + DWORD dwValueNameSize = dwMaxValueNameSizeInChars; + DWORD dwDataSize = dwMaxValueDataSizeInBytes; + memset(szValueName, 0, dwMaxValueNameSizeInBytes); + memset(byValue, 0, dwMaxValueDataSizeInBytes); + LONG nEnum = RegEnumValue(hSERIALCOMM, dwIndex, szValueName, &dwValueNameSize, NULL, &dwType, (LPBYTE)byValue, &dwDataSize); + while (nEnum == ERROR_SUCCESS) + { + // If the value is of the correct type, then add it to the array + if (dwType == REG_SZ) + { + char portname[512]; + TCHAR* szPort = byValue; + int nUserNameLenUnicode = lstrlen( szPort ); // Convert all UNICODE characters + int nUserNameLen = WideCharToMultiByte( CP_ACP, // ANSI Code Page + 0, // No special handling of unmapped chars + (LPCWSTR)szPort, // wide-character string to be converted + nUserNameLenUnicode, + NULL, 0, // No output buffer since we are calculating length + NULL, NULL ); // Unrepresented char replacement - Use Default + TCHAR* pszUserName = new TCHAR[ nUserNameLen ]; // nUserNameLen includes the NULL character + WideCharToMultiByte( CP_ACP, // ANSI Code Page + 0, // No special handling of unmapped chars + (LPCWSTR)szPort, // wide-character string to be converted + nUserNameLenUnicode, + portname, + nUserNameLen, + NULL, NULL ); // Unrepresented char replacement - Use Default + portname[nUserNameLen] = 0; +#ifdef UNICODE + comPortList.push_back(portname); +#else + comPortList.push_back(szPort); +#endif + } + // Prepare for the next time around + dwValueNameSize = dwMaxValueNameSizeInChars; + dwDataSize = dwMaxValueDataSizeInBytes; + memset(szValueName, 0, dwMaxValueNameSizeInBytes); + memset(byValue, 0, dwMaxValueDataSizeInBytes); + ++dwIndex; + nEnum = RegEnumValue(hSERIALCOMM, dwIndex, szValueName, &dwValueNameSize, NULL, &dwType, (LPBYTE)byValue, &dwDataSize); + } + } + delete szValueName; + delete byValue; + } + // Close the registry key now that we are finished with it + RegCloseKey(hSERIALCOMM); + + if (dwQueryInfo != ERROR_SUCCESS) + SetLastError(dwQueryInfo); + } +#else + char tempBuffer[256]; + string result = ""; +#warning Currently searching only for ACM connections + system( "ls /dev | grep ttyACM > /tmp/foundSerialPorts.txt"); + + fstream fin; + fin.open("/tmp/foundSerialPorts.txt", ios::in); + while(!fin.eof()) + { + fin.getline(tempBuffer, 256); + result = "/dev/"; + result.append(tempBuffer); + if( strlen(tempBuffer) > 3 ) //longer than tty + comPortList.push_back(result); + } + fin.close(); +#endif +} + +/** @brief Opens COM port + @param comName COM port name + @param baudrate COM port baudrate + @return 0 on success +*/ +IConnection::DeviceStatus ConnectionCOM::Open(const char *comName, int baudrate) +{ + Close(); + if (strlen(comName) == 0) + return FAILURE; + + DeviceStatus errorCode = SUCCESS; + +#ifndef __unix__ + // Initialize Overlap structures + m_osROverlap.Internal = 0; + m_osROverlap.InternalHigh = 0; + m_osROverlap.Offset = 0; + m_osROverlap.OffsetHigh = 0; + m_osROverlap.hEvent = CreateEvent(NULL, false, false, NULL); + + m_osWOverlap.Internal = 0; + m_osWOverlap.InternalHigh = 0; + m_osWOverlap.Offset = 0; + m_osWOverlap.OffsetHigh = 0; + m_osWOverlap.hEvent = CreateEvent(NULL, false, false, NULL); + + // Initialize DSB structure + memset(&m_dcbCommPort, 0, sizeof(m_dcbCommPort)); + + m_dcbCommPort.BaudRate = comBaudrate; + m_dcbCommPort.fBinary = 1; + m_dcbCommPort.fParity = 0; + m_dcbCommPort.fOutxCtsFlow = 0; + m_dcbCommPort.fOutxDsrFlow = 0; + m_dcbCommPort.fDtrControl = 0; + m_dcbCommPort.fDsrSensitivity = 0; + m_dcbCommPort.fTXContinueOnXoff = 0; + m_dcbCommPort.fOutX = 0; + m_dcbCommPort.fInX = 0; + m_dcbCommPort.fErrorChar = 0; + m_dcbCommPort.fNull = 0; + m_dcbCommPort.fRtsControl = 0; + m_dcbCommPort.fAbortOnError = 0; + m_dcbCommPort.fDummy2 = 0; + // m_dcbCommPort.wReserved = 0; + m_dcbCommPort.XonLim = 512; + m_dcbCommPort.XoffLim = 512; + m_dcbCommPort.ByteSize = 8; + m_dcbCommPort.Parity = 0; + m_dcbCommPort.StopBits = 0; + //m_dcbCommPort.StopBits = 1; + m_dcbCommPort.XonChar = 17; + m_dcbCommPort.XoffChar = 19; + m_dcbCommPort.ErrorChar = 0; + m_dcbCommPort.EofChar = 26; + m_dcbCommPort.EvtChar = 0; + m_dcbCommPort.wReserved1 = 0; + m_dcbCommPort.DCBlength = sizeof(DCB); + + // Initialize Timeout's + m_ctmoNew.ReadIntervalTimeout = 50; + m_ctmoNew.ReadTotalTimeoutMultiplier = 0; + m_ctmoNew.ReadTotalTimeoutConstant = 100; // 1; + m_ctmoNew.WriteTotalTimeoutMultiplier = 0; + m_ctmoNew.WriteTotalTimeoutConstant = 100; + + // Open COM port + string stmp; + stmp = "\\\\.\\"; + stmp.append(comName); + hComm = CreateFileA(stmp.c_str(), GENERIC_READ | GENERIC_WRITE, 0, 0, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, 0); + + if (hComm != INVALID_HANDLE_VALUE) + { + // Set Events + if (!SetCommMask(hComm, 0)) + errorCode = FAILURE; + + // Set Timeouts + GetCommTimeouts(hComm, &m_ctmoOld); + if (!SetCommTimeouts(hComm, &m_ctmoNew)) + errorCode = FAILURE; + + // Set DCB + if (!SetCommState(hComm, &m_dcbCommPort)) + errorCode = FAILURE; + } + else + { + errorCode = FAILURE; + }; + + // Check the results + if (errorCode != 0) + { + //unsigned long err = GetLastError(); + CloseHandle(hComm); + hComm = INVALID_HANDLE_VALUE; + return errorCode; + } + else + { + PurgeComm(hComm, PURGE_TXCLEAR | PURGE_RXCLEAR); + return SUCCESS; + } +#else + hComm = open(comName, O_RDWR | O_NOCTTY | O_SYNC); + if(hComm < 0) + { +// printf("%s",strerror(errno)); +// MessageLog::getInstance()->write("Connection manager: failed opening COM port\n", LOG_ERROR); + return FAILURE; + } + + struct termios tty; + memset(&tty, 0, sizeof(tty)); + if( tcgetattr(hComm, &tty) != 0) + { +// MessageLog::getInstance()->write("Connection Manager: error from tcgetattr\n", LOG_ERROR); + return FAILURE; + } + int speed = B9600; + cfsetospeed(&tty, speed); + cfsetispeed(&tty, speed); + + tty.c_cflag = (tty.c_cflag & ~CSIZE) | CS8; + tty.c_iflag &= ~IGNBRK; + tty.c_lflag = 0; + tty.c_oflag = 0; + tty.c_cc[VMIN] = 0; // read non blocking + tty.c_cc[VTIME] = 5; // 0.5 seconds read timeout + + tty.c_iflag &= ~(IXON | IXOFF | IXANY); + tty.c_cflag |= (CLOCAL | CREAD); + + if(tcsetattr(hComm, TCSANOW, &tty) != 0) + { +// MessageLog::getInstance()->write("Connection manager: error from tcsetattr\n", LOG_ERROR); + return FAILURE; + } +#endif + return SUCCESS; +} + +/** @brief Checks if chip is connected to currently open port + @return chip is connected +*/ +bool ConnectionCOM::TestConnectivity() +{ +//currently set to always return true to show all com ports + return true; +#ifndef __unix__ + if (hComm != INVALID_HANDLE_VALUE) +#else + if( hComm >= 0) +#endif + { +// unsigned char out[64]; +// unsigned char in[64]; +// memset(in, 0, 64); +// out[0] = CMD_GET_INFO; +// SendData(out, 64); +// ReadData(in, 64); +// if(in[0] == CMD_GET_INFO && in[1] == 0x01) +// return true; +// else +// return false; + } + return false; +} + +/** @brief Finds all chips connected to com ports + @return number of devices found +*/ +int ConnectionCOM::RefreshDeviceList() +{ + int wasOpen = -1; + string wasOpenName = ""; + if(IsOpen()) + { + wasOpen = GetOpenedIndex(); + wasOpenName = comPortName; + } + Close(); + comPortList.clear(); + if(comPortList.size() == 0) + FindAllComPorts(); + + m_deviceNames.clear(); + string comName; + for(unsigned int i=0; i ConnectionCOM::GetDeviceNames() +{ + return m_deviceNames; +} + +/** @brief Purges communication buffers +*/ +void ConnectionCOM::ClearComm() +{ +#ifndef __unix__ + PurgeComm(hComm, PURGE_TXCLEAR|PURGE_RXCLEAR); +#endif +} diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/connectionManager/ConnectionCOM.h b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/connectionManager/ConnectionCOM.h new file mode 100644 index 0000000000..0549472db1 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/connectionManager/ConnectionCOM.h @@ -0,0 +1,62 @@ +/** +@file ConnectionCOM.h +@author Lime Microsystems (www.limemicro.com) +@brief Class for data communications through COM port +*/ + +#ifndef CONNECTION_COM_PORT_H +#define CONNECTION_COM_PORT_H + +#ifndef __unix__ + #include "windows.h" +#endif + +#include "IConnection.h" + +class ConnectionCOM : public IConnection +{ +public: + static const int COM_BUFFER_LENGTH = 1024; //max buffer size for data + + ConnectionCOM(); + ~ConnectionCOM(); + + DeviceStatus Open(); + DeviceStatus Open(unsigned i); + void Close(); + bool IsOpen(); + int GetOpenedIndex(); + + int Write(const unsigned char *buffer, int length, int timeout_ms = 0); + int Read(unsigned char *buffer, int length, int timeout_ms = 0); + + std::vector GetDeviceNames(); + int RefreshDeviceList(); + void ClearComm(); +private: + void FindAllComPorts(); + DeviceStatus Open(const char *comName, int baudrate); + + bool TestConnectivity(); + + std::string comPortName; + int comBaudrate; + bool connected; + + int currentDeviceIndex; + std::vector comPortList; + std::vector m_deviceNames; + +#ifndef __unix__ + HANDLE hComm; + COMMTIMEOUTS m_ctmoNew; + COMMTIMEOUTS m_ctmoOld; + OVERLAPPED m_osROverlap; + OVERLAPPED m_osWOverlap; + DCB m_dcbCommPort; +#else + int hComm; //com port file descriptor +#endif + +}; +#endif diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/connectionManager/ConnectionManager.cpp b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/connectionManager/ConnectionManager.cpp new file mode 100644 index 0000000000..36f73da5d7 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/connectionManager/ConnectionManager.cpp @@ -0,0 +1,314 @@ +/** + @file ConnectionManager.cpp + @author Lime Microsystems (www.limemicro.com) + @brief Implementation of various connection types to devices +*/ + +#include "ConnectionManager.h" +#include "ConnectionCOM.h" + +#ifdef ENABLE_USB_CONNECTION + #include "ConnectionUSB.h" +#endif +#ifdef ENABLE_SPI_CONNECTION + #include "ConnectionSPI.h" +#endif + +#include +#include +#include + +/** @brief Creates connection interfaces +*/ +ConnectionManager::ConnectionManager() : activeControlPort(NULL) +{ + mLogData = false; + mOpenedDevice = -1; + m_connections[IConnection::COM_PORT] = new ConnectionCOM(); +#ifdef ENABLE_USB_CONNECTION + m_connections[IConnection::USB_PORT] = new ConnectionUSB(); +#endif +#ifdef ENABLE_SPI_CONNECTION + m_connections[IConnection::SPI_PORT] = new ConnectionSPI(); +#endif +} + +/** @brief Destroys connection interfaces +*/ +ConnectionManager::~ConnectionManager() +{ + for (auto iter = m_connections.begin(); iter != m_connections.end(); ++iter) + { + delete iter->second; + } +} + +/** @brief Checks if connection to device is opened + @return True if device is connected +*/ +bool ConnectionManager::IsOpen() +{ + return activeControlPort ? activeControlPort->IsOpen() : false; +} + +/** @brief Opens connection to first available device + @return True if connected to device +*/ +bool ConnectionManager::Open() +{ + return Open(0); +} + +/** @brief Connects to selected device + @param i device index from device list + @return 1:Success, 0:failure +*/ +int ConnectionManager::Open(unsigned i) +{ + if(i >= mDevices.size()) + return 0; + + if(activeControlPort) + activeControlPort->Close(); + switch(mDevices[i].port) + { + case IConnection::COM_PORT: + activeControlPort = m_connections[IConnection::COM_PORT]; + break; + case IConnection::USB_PORT: + activeControlPort = m_connections[IConnection::USB_PORT]; + break; + case IConnection::SPI_PORT: + activeControlPort = m_connections[IConnection::SPI_PORT]; + break; + default: + return 0; + } + mOpenedDevice = -1; + if( i < mDevices.size() ) + { + if( activeControlPort->Open(mDevices[i].portIndex) ) + { + mOpenedDevice = i; + return 1; + } + } + return 0; +} + +/** @brief Closes connection to device +*/ +void ConnectionManager::Close() +{ + if(activeControlPort) + { + activeControlPort->Close(); + //Notify(LMS_Message(MSG_BOARD_DISCONNECTED, "", 0, 0)); + } + mOpenedDevice = -1; +} + +/** @brief Finds all currently connected devices and forms device list + @return number of devices found +*/ +int ConnectionManager::RefreshDeviceList() +{ + mDeviceList.clear(); + mDevices.clear(); + DeviceInfo dev; + for (auto iter = m_connections.begin(); iter != m_connections.end(); ++iter) + { + vector names; + IConnection *port = iter->second; + if(port->RefreshDeviceList() > 0) + { + names = port->GetDeviceNames(); + for(unsigned i=0; ifirst; + dev.portIndex = i; + mDevices.push_back(dev); + } + } + } + for(unsigned i=0; iWrite(buffer, length, timeout_ms); +#ifndef NDEBUG + if(mLogData) + { + stringstream ss; + ss << "WR(" << (bytesTransferred>=0?bytesTransferred: 0) << "): "; + ss << std::hex << std::setfill('0'); + int repeatedZeros = 0; + for(int i=length-1; i>=0; --i) + if(buffer[i] == 0) + ++repeatedZeros; + else break; + if(repeatedZeros == 1) + repeatedZeros = 0; + repeatedZeros = repeatedZeros - (repeatedZeros & 0x1); + for(int i=0; i 1) + ss << " (00 x " << std::dec << repeatedZeros << " times)"; + cout << ss.str() << endl; + } +#endif + return bytesTransferred; + } + return -1; +} + +/** @brief Receives data from currently opened connection + @param buffer incomming data buffer, must be big enough for length bytes + @param length bytes to read + @param timeout_ms timeout in milliseconds + @return number of bytes received +*/ +int ConnectionManager::Read(unsigned char *buffer, int length, int timeout_ms) +{ + if(activeControlPort) + { + int bytesTransferred = activeControlPort->Read(buffer, length, timeout_ms); +#ifndef NDEBUG + if(mLogData) + { + stringstream ss; + ss << "RD(" << (bytesTransferred>=0?bytesTransferred: 0) << "): "; + ss << std::hex << std::setfill('0'); + int repeatedZeros = 0; + for(int i=length-1; i>=0; --i) + if(buffer[i] == 0) + ++repeatedZeros; + else break; + if(repeatedZeros == 2) + repeatedZeros = 0; + repeatedZeros = repeatedZeros - (repeatedZeros & 0x1); + for(int i=0; i 2) + ss << " (00 x " << std::dec << repeatedZeros << " times)"; + cout << ss.str() << endl; + } +#endif + return bytesTransferred; + } + return -1; +} + +int ConnectionManager::WriteStream(const char *buffer, int length) +{ + return 0; +} + +int ConnectionManager::ReadStream(char *buffer, int length, unsigned int timeout_ms) +{ + /*int handle = activeControlPort->BeginDataReading(buffer, length); + activeControlPort->WaitForReading(handle, timeout_ms); + long received = length; + activeControlPort->FinishDataReading(buffer, received, handle); + return received; + */ + long len = length; + int status = activeControlPort->ReadDataBlocking(buffer, len, 0); + return len; +} + + +int ConnectionManager::BeginDataReading(char *buffer, long length) +{ + return activeControlPort->BeginDataReading(buffer, length); +} +/** +@brief Blocks until data is received or set number of milliseconds have passed. +@param contextHandle handle returned by BeginDataReading() +@param timeout_ms number of milliseconds to wait +@return 1-data received, 0-data not received +*/ +int ConnectionManager::WaitForReading(int contextHandle, unsigned int timeout_ms) +{ + return activeControlPort->WaitForReading(contextHandle, timeout_ms); +} +/** +@brief Finished asynchronous data reading. +@param buffer where to put received data +@param length number of bytes to read, will be changed to actual number of bytes received +@param contextHandle context handle returned by BeginDataReading() +@return received data length +*/ +int ConnectionManager::FinishDataReading(char *buffer, long &length, int contextHandle) +{ + return activeControlPort->FinishDataReading(buffer, length, contextHandle); +} + +/** +@brief Aborts reading operations +*/ +void ConnectionManager::AbortReading() +{ + activeControlPort->AbortReading(); +} + +/** +@brief Start asynchronous data sending. +@param buffer data buffer to be sent +@param length number of bytes to send. +@return context handle +*/ +int ConnectionManager::BeginDataSending(const char *buffer, long length) +{ + return activeControlPort->BeginDataSending(buffer, length); +} +/** +@brief Blocks until data is sent or set number of miliseconds have passed. +@param contextHandle handle returned by BeginDataReading() +@param timeout_ms number of miliseconds to wait +@return 1-data sent, 0-data not sent +*/ +int ConnectionManager::WaitForSending(int contextHandle, unsigned int timeout_ms) +{ + return activeControlPort->WaitForSending(contextHandle, timeout_ms); +} +/** +@brief Finished asynchronous data sending. +@param buffer where to put received data +@param length number of bytes to send, will be changed to actual number of bytes sent +@param contextHandle context handle returned by BeginDataReading() +@return sent data length +*/ +int ConnectionManager::FinishDataSending(const char *buffer, long &length, int contextHandle) +{ + return activeControlPort->FinishDataSending(buffer, length, contextHandle); +} + +/** +@brief Aborts sending operations +*/ +void ConnectionManager::AbortSending() +{ + activeControlPort->AbortSending(); +} diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/connectionManager/ConnectionManager.h b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/connectionManager/ConnectionManager.h new file mode 100644 index 0000000000..edd01d3833 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/connectionManager/ConnectionManager.h @@ -0,0 +1,60 @@ +/** + @file ConnectionManager.h + @author Lime Microsystems (www.limemicro.com) + @brief Class for managing connection to devices +*/ + +#ifndef LMS_CONNECTION_MANAGER_H +#define LMS_CONNECTION_MANAGER_H + +#include "IConnection.h" +#include + +class ConnectionManager +{ +public: + struct DeviceInfo + { + std::string name; + IConnection::eConnectionType port; + int portIndex; + }; + + ConnectionManager(); + ~ConnectionManager(); + bool IsOpen(); + bool Open(); + int Open(unsigned i); + void Close(); + int RefreshDeviceList(); + int GetOpenedIndex(); + std::vector GetDeviceList(){return mDeviceList;}; + + int Write(const unsigned char *buffer, int length, int timeout_ms = 0); + int Read(unsigned char *buffer, int length, int timeout_ms = 0); + + int WriteStream(const char *buffer, int length); + int ReadStream(char *buffer, int length, unsigned int timeout_ms); + + int BeginDataReading(char *buffer, long length); + int WaitForReading(int contextHandle, unsigned int timeout_ms); + int FinishDataReading(char *buffer, long &length, int contextHandle); + void AbortReading(); + + int BeginDataSending(const char *buffer, long length); + int WaitForSending(int contextHandle, unsigned int timeout_ms); + int FinishDataSending(const char *buffer, long &length, int contextHandle); + void AbortSending(); + +protected: + bool mLogData; + /// Port used for communication. + IConnection *activeControlPort; + std::vector mDevices; + std::vector mDeviceList; + int mOpenedDevice; + std::map m_connections; +}; + +#endif // LMS_CONNECTION_MANAGER_H + diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/connectionManager/ConnectionSPI.cpp b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/connectionManager/ConnectionSPI.cpp new file mode 100644 index 0000000000..e490db4dab --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/connectionManager/ConnectionSPI.cpp @@ -0,0 +1,290 @@ +/** + @file ConnectionSPI.cpp + @author Lime Microsystems (www.limemicro.com) + @brief Implementation of communications through SPI port +*/ + +#include "ConnectionSPI.h" + +#include "string.h" +#ifdef __unix__ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#endif // LINUX + +#include +#include + +const int ConnectionSPI::cSPI_BUF_SIZE = 128; +const int ConnectionSPI::cSPI_SPEED_HZ = 2000000; + +/** @brief Tries to read EEPROM for Novena board signature + @return true if Novena board +*/ +bool IsNovenaBoard() +{ +#ifdef __unix__ + char data[8]; + int count = 6; + memset(data, 0, 8); + int addr = 0; + struct i2c_rdwr_ioctl_data session; + struct i2c_msg messages[2]; + char set_addr_buf[2]; + memset(set_addr_buf, 0, sizeof(set_addr_buf)); + memset(data, 0, count); + set_addr_buf[0] = addr>>8; + set_addr_buf[1] = addr; + messages[0].addr = 0xac>>1; + messages[0].flags = 0; + messages[0].len = sizeof(set_addr_buf); + messages[0].buf = set_addr_buf; + messages[1].addr = 0xac>>1; + messages[1].flags = I2C_M_RD; + messages[1].len = count; + messages[1].buf = data; + session.msgs = messages; + session.nmsgs = 2; + + bool isNovena = false; + + int fd = open("/dev/i2c-2", O_RDWR); + if(fd > 0) + { + if(ioctl(fd, I2C_RDWR, &session) < 0) + { + perror("Unable to communicate with i2c device"); + isNovena = false; + } + if(strcmp("Novena", data) == 0) + isNovena = true; + } + close(fd); + return isNovena; +#else + return false; +#endif +} + +/** @brief Initializes SPI port and exports needed GPIO +*/ +ConnectionSPI::ConnectionSPI() +{ + fd = -1; + m_connectionType = SPI_PORT; + std::fstream gpio; + //export SEN pin + gpio.open("/sys/class/gpio/export", ios::out); + if(gpio.good()) + { + gpio << 122; + gpio.flush(); + gpio.close(); + gpio.open("/sys/class/gpio/gpio122/direction", ios::out); + gpio << "out"; + gpio.flush(); + gpio.close(); + m_SEN.open("/sys/class/gpio/gpio122/value", ios::out); + m_SEN<< 1; + m_SEN.flush(); + cout << "GPIO122: set to 1" << endl; + } +} + +ConnectionSPI::~ConnectionSPI() +{ + Close(); + m_SEN.close(); +} + +/** @brief Opens connection to first found chip + @return 0-success +*/ +IConnection::DeviceStatus ConnectionSPI::Open() +{ + Close(); +#ifdef __unix__ + fd = open("/dev/spidev2.0", O_RDWR | O_SYNC); + if (fd < 0) + { + //MessageLog::getInstance()->write("SPI PORT: device not found\n", LOG_ERROR); + return IConnection::FAILURE; + } + int mode = SPI_MODE_0; + int ret = ioctl(fd, SPI_IOC_WR_MODE, &mode); + if (ret == -1) + printf("can't set spi mode"); + + ret = ioctl(fd, SPI_IOC_RD_MODE, &mode); + if (ret == -1) + printf("can't get spi mode"); + + /* + * bits per word + */ + int bits = 8; + ret = ioctl(fd, SPI_IOC_WR_BITS_PER_WORD, &bits); + if (ret == -1) + printf("can't set bits per word"); + + ret = ioctl(fd, SPI_IOC_RD_BITS_PER_WORD, &bits); + if (ret == -1) + printf("can't get bits per word"); + + /* + * max speed hz + */ + int speed = cSPI_SPEED_HZ; + ret = ioctl(fd, SPI_IOC_WR_MAX_SPEED_HZ, &speed); + if (ret == -1) + printf("can't set max speed hz"); + + ret = ioctl(fd, SPI_IOC_RD_MAX_SPEED_HZ, &speed); + if (ret == -1) + printf("can't get max speed hz"); + + printf("spi mode: 0x%x\n", mode); + printf("bits per word: %d\n", bits); + printf("max speed: %d Hz (%d KHz)\n", speed, speed/1000); + return IConnection::SUCCESS; +#else + return IConnection::FAILURE; +#endif +} + +/** @brief Opens connection to selected chip + @param index chip index in device list + @return 0-success +*/ +IConnection::DeviceStatus ConnectionSPI::Open(unsigned index) +{ + return Open(); +} + +/** @brief Closes connection to chip +*/ +void ConnectionSPI::Close() +{ +#ifdef __unix__ + close(fd); + fd = -1; +#endif +} + +/** @brief Returns whether chip is connected + @return chip is connected +*/ +bool ConnectionSPI::IsOpen() +{ + return (fd >= 0); +} + +/** @brief Sends data through SPI port + @param buffer data buffer to send + @param length size of data buffer + @param timeout_ms timeout limit for operation in milliseconds + @return Number of bytes sent +*/ +int ConnectionSPI::Write(const unsigned char *buffer, int length, int timeout_ms) +{ + #ifdef __unix__ + if(fd < 0) + return 0; + m_SEN << 0; + m_SEN.flush(); + unsigned long bytesWritten = 0; + rxbuf.clear(); + int bytesReceived = 0; + char rxbytes[2]; + while(bytesWritten < length) + { + int toWrite = length-bytesWritten > cSPI_BUF_SIZE ? cSPI_BUF_SIZE : length-bytesWritten; + for(int i=0; i rxbuf.size() ? rxbuf.size() : length; + memcpy(buffer, &rxbuf[0], tocpy); + rxbuf.clear(); + return tocpy; +#else + return 0; +#endif +} + +/** @brief Finds SPI port + @return number of devices found +*/ +int ConnectionSPI::RefreshDeviceList() +{ + m_deviceNames.clear(); +#ifdef __unix__ + int spidev = open("/dev/spidev2.0", O_RDWR); + if (spidev >= 0) + { + if(IsNovenaBoard() == true) + m_deviceNames.push_back("SPI (Novena)"); + else + m_deviceNames.push_back("SPI"); + } + close(spidev); +#endif + return m_deviceNames.size(); +} + +/** @brief Returns found devices names + @return vector of device names +*/ +vector ConnectionSPI::GetDeviceNames() +{ + return m_deviceNames; +} + +int ConnectionSPI::GetOpenedIndex() +{ + return 0; +} diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/connectionManager/ConnectionSPI.h b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/connectionManager/ConnectionSPI.h new file mode 100644 index 0000000000..79d9bd9b9b --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/connectionManager/ConnectionSPI.h @@ -0,0 +1,41 @@ +/** +@file ConnectionSPI.h +@author Lime Microsystems (www.limemicro.com) +@brief Class for data communications through SPI port +*/ + +#ifndef CONNECTION_SPI_PORT_H +#define CONNECTION_SPI_PORT_H + +#include "IConnection.h" +#include +#include +#include + +class ConnectionSPI : public IConnection +{ +public: + static const int cSPI_BUF_SIZE; + static const int cSPI_SPEED_HZ; + + ConnectionSPI(); + ~ConnectionSPI(); + + DeviceStatus Open(); + DeviceStatus Open(unsigned i); + void Close(); + bool IsOpen(); + int GetOpenedIndex(); + + int Write(const unsigned char *buffer, int length, int timeout_ms = 0); + int Read(unsigned char *buffer, int length, int timeout_ms = 0); + + std::vector GetDeviceNames(); + int RefreshDeviceList(); +protected: + std::vector m_deviceNames; + std::vector rxbuf; + int fd; + std::fstream m_SEN; +}; +#endif diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/connectionManager/ConnectionUSB.cpp b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/connectionManager/ConnectionUSB.cpp new file mode 100644 index 0000000000..b99fe6490b --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/connectionManager/ConnectionUSB.cpp @@ -0,0 +1,762 @@ +/** +@file ConnectionUSB.cpp +@author Lime Microsystems (www.limemicro.com) +@brief Data writing and reading through USB port +*/ + +#include "ConnectionUSB.h" +#include + +#ifdef __unix__ + #include + #include +#endif + +#define USB_TIMEOUT 1000 + +#define HW_LDIGIRED L"DigiRed" +#define HW_LDIGIGREEN L"DigiGreen" +#define HW_LSTREAMER L"Stream" + +#define HW_DIGIRED "DigiRed" +#define HW_DIGIGREEN "DigiGreen" +#define HW_STREAMER "Stream" + +#define CTR_W_REQCODE 0xC1 +#define CTR_W_VALUE 0x0000 +#define CTR_W_INDEX 0x0000 + +#define CTR_R_REQCODE 0xC0 +#define CTR_R_VALUE 0x0000 +#define CTR_R_INDEX 0x0000 + +/** @brief Initializes port type and object necessary to communicate to usb device. +*/ +ConnectionUSB::ConnectionUSB() +{ + m_hardwareName = ""; + isConnected = false; + m_connectionType = USB_PORT; +#ifndef __unix__ + USBDevicePrimary = new CCyUSBDevice(NULL); + OutCtrEndPt = NULL; + InCtrEndPt = NULL; + InCtrlEndPt3 = NULL; + OutCtrlEndPt3 = NULL; +#else + dev_handle = 0; + devs = 0; + int r = libusb_init(&ctx); //initialize the library for the session we just declared + if(r < 0) + printf("Init Error %i\n", r); //there was an error + libusb_set_debug(ctx, 3); //set verbosity level to 3, as suggested in the documentation +#endif + currentDeviceIndex = -1; +} + +/** @brief Closes connection to chip and deallocates used memory. +*/ +ConnectionUSB::~ConnectionUSB() +{ + Close(); +#ifndef __unix__ + delete USBDevicePrimary; +#else + libusb_exit(ctx); +#endif +} + +/** @brief Automatically open first available chip connected to usb port. + @return 0-success, other-failure +*/ +IConnection::DeviceStatus ConnectionUSB::Open() +{ + currentDeviceIndex = -1; + if(m_deviceNames.size() == 0) + RefreshDeviceList(); + +#ifndef __unix__ + for(int i=0; iDeviceCount(); ++i) + if( Open(i) == SUCCESS) + { + currentDeviceIndex = i; + return SUCCESS; + } +#else + if(Open(0) == SUCCESS) + return SUCCESS; +#endif + return FAILURE; +} + +/** @brief Tries to open connected USB device and find communication endpoints. + @return Returns 1-Success, 0-EndPoints not found or device didn't connect. +*/ +IConnection::DeviceStatus ConnectionUSB::Open(unsigned index) +{ +#ifndef __unix__ + wstring m_hardwareDesc = L""; + if( index < USBDevicePrimary->DeviceCount()) + { + if(USBDevicePrimary->Open(index)) + { + m_hardwareDesc = USBDevicePrimary->Product; + unsigned int pos; + //determine connected board type + pos = m_hardwareDesc.find(HW_LDIGIRED, 0); + if( pos != wstring::npos ) + m_hardwareName = HW_DIGIRED; + else if (m_hardwareDesc.find(HW_LSTREAMER, 0) != wstring::npos) + m_hardwareName = HW_STREAMER; + else + m_hardwareName = HW_STREAMER; + + + if (InCtrlEndPt3) + { + delete InCtrlEndPt3; + InCtrlEndPt3 = NULL; + } + InCtrlEndPt3 = new CCyControlEndPoint(*USBDevicePrimary->ControlEndPt); + + if (OutCtrlEndPt3) + { + delete OutCtrlEndPt3; + OutCtrlEndPt3 = NULL; + } + OutCtrlEndPt3 = new CCyControlEndPoint(*USBDevicePrimary->ControlEndPt); + + InCtrlEndPt3->ReqCode = CTR_R_REQCODE; + InCtrlEndPt3->Value = CTR_R_VALUE; + InCtrlEndPt3->Index = CTR_R_INDEX; + + OutCtrlEndPt3->ReqCode = CTR_W_REQCODE; + OutCtrlEndPt3->Value = CTR_W_VALUE; + OutCtrlEndPt3->Index = CTR_W_INDEX; + + for (int i=0; iEndPointCount(); i++) + if(USBDevicePrimary->EndPoints[i]->Address == 0x01) + { + OutEndPt = USBDevicePrimary->EndPoints[i]; + long len = OutEndPt->MaxPktSize * 64; + OutEndPt->SetXferSize(len); + break; + } + for (int i=0; iEndPointCount(); i++) + if(USBDevicePrimary->EndPoints[i]->Address == 0x81) + { + InEndPt = USBDevicePrimary->EndPoints[i]; + long len = InEndPt->MaxPktSize * 64; + InEndPt->SetXferSize(len); + break; + } + isConnected = true; + return SUCCESS; + } //successfully opened device + } //if has devices + return FAILURE; +#else + if(index >= 0 && index < m_dev_pid_vid.size()) + { + dev_handle = libusb_open_device_with_vid_pid(ctx, m_dev_pid_vid[index].second, m_dev_pid_vid[index].first); + + if(dev_handle == 0) + return FAILURE; + if(libusb_kernel_driver_active(dev_handle, 0) == 1) //find out if kernel driver is attached + { + printf("Kernel Driver Active\n"); + if(libusb_detach_kernel_driver(dev_handle, 0) == 0) //detach it + printf("Kernel Driver Detached!\n"); + } + int r = libusb_claim_interface(dev_handle, 0); //claim interface 0 (the first) of device + if(r < 0) + { + printf("Cannot Claim Interface\n"); + return CANNOT_CLAIM_INTERFACE; + } + printf("Claimed Interface\n"); + isConnected = true; + return SUCCESS; + } + else + { + return FAILURE; + } +#endif +} + +/** @brief Closes communication to device. +*/ +void ConnectionUSB::Close() +{ + #ifndef __unix__ + USBDevicePrimary->Close(); + InEndPt = NULL; + OutEndPt = NULL; + if (InCtrlEndPt3) + { + delete InCtrlEndPt3; + InCtrlEndPt3 = NULL; + } + if (OutCtrlEndPt3) + { + delete OutCtrlEndPt3; + OutCtrlEndPt3 = NULL; + } + #else + if(dev_handle != 0) + { + libusb_release_interface(dev_handle, 0); + libusb_close(dev_handle); + dev_handle = 0; + } + #endif + isConnected = false; +} + +/** @brief Returns connection status + @return 1-connection open, 0-connection closed. +*/ +bool ConnectionUSB::IsOpen() +{ + #ifndef __unix__ + return USBDevicePrimary->IsOpen() && isConnected; + #else + return isConnected; + #endif +} + +/** @brief Sends given data buffer to chip through USB port. + @param buffer data buffer, must not be longer than 64 bytes. + @param length given buffer size. + @param timeout_ms timeout limit for operation in milliseconds + @return number of bytes sent. +*/ +int ConnectionUSB::Write(const unsigned char *buffer, const int length, int timeout_ms) +{ + long len = length; + if(IsOpen()) + { + unsigned char* wbuffer = new unsigned char[length]; + memcpy(wbuffer, buffer, length); + if(m_hardwareName == HW_DIGIRED || m_hardwareName == HW_STREAMER) + { + #ifndef __unix__ + if(OutCtrlEndPt3) + OutCtrlEndPt3->Write(wbuffer, len); + else + len = 0; + #else + len = libusb_control_transfer(dev_handle, LIBUSB_REQUEST_TYPE_VENDOR,CTR_W_REQCODE ,CTR_W_VALUE, CTR_W_INDEX, wbuffer, length, USB_TIMEOUT); + #endif + } + else + { + #ifndef __unix__ + if(OutCtrEndPt) + OutCtrEndPt->XferData(wbuffer, len); + else + len = 0; + #else + int actual = 0; + libusb_bulk_transfer(dev_handle, 0x01, wbuffer, len, &actual, USB_TIMEOUT); + len = actual; + #endif + } + delete wbuffer; + } + else + return 0; + return len; +} + +/** @brief Reads data coming from the chip through USB port. + @param buffer pointer to array where received data will be copied, array must be + big enough to fit received data. + @param length number of bytes to read from chip. + @param timeout_ms timeout limit for operation in milliseconds + @return number of bytes received. +*/ +int ConnectionUSB::Read(unsigned char *buffer, const int length, int timeout_ms) +{ + long len = length; + if(IsOpen()) + { + if(m_hardwareName == HW_DIGIRED || m_hardwareName == HW_STREAMER) + { + #ifndef __unix__ + if(InCtrlEndPt3) + InCtrlEndPt3->Read(buffer, len); + else + len = 0; + #else + len = libusb_control_transfer(dev_handle, LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_ENDPOINT_IN ,CTR_R_REQCODE ,CTR_R_VALUE, CTR_R_INDEX, buffer, len, USB_TIMEOUT); + #endif + } + else + { + #ifndef __unix__ + if(InCtrEndPt) + InCtrEndPt->XferData(buffer, len); + else + len = 0; + #else + int actual = 0; + libusb_bulk_transfer(dev_handle, 0x81, buffer, len, &actual, USB_TIMEOUT); + len = actual; + #endif + } + } + return len; +} + +#ifdef __unix__ +/** @brief Function for handling libusb callbacks +*/ +void callback_libusbtransfer(libusb_transfer *trans) +{ + USBTransferContext *context = reinterpret_cast(trans->user_data); + switch(trans->status) + { + case LIBUSB_TRANSFER_CANCELLED: + printf("Transfer canceled\n" ); + context->bytesXfered = trans->actual_length; + context->done = true; + context->used = false; + context->reset(); + break; + case LIBUSB_TRANSFER_COMPLETED: + if(trans->actual_length == context->bytesExpected) + { + context->bytesXfered = trans->actual_length; + context->done = true; + } + //printf("Transfer complete %i\n", trans->actual_length); + break; + case LIBUSB_TRANSFER_ERROR: + printf("TRANSFER ERRRO\n"); + break; + case LIBUSB_TRANSFER_TIMED_OUT: + printf("transfer timed out\n"); + + break; + case LIBUSB_TRANSFER_OVERFLOW: + printf("transfer overflow\n"); + + break; + case LIBUSB_TRANSFER_STALL: + printf("transfer stalled\n"); + break; + } + context->mPacketProcessed.notify_one(); +} +#endif + +/** @brief Finds all chips connected to usb ports + @return number of devices found +*/ +int ConnectionUSB::RefreshDeviceList() +{ + #ifndef __unix__ + USBDevicePrimary->Close(); + currentDeviceIndex = -1; + m_deviceNames.clear(); + string name; + if (USBDevicePrimary->DeviceCount()) + { + for (int i=0; iDeviceCount(); ++i) + { + Open(i); + name = DeviceName(); + m_deviceNames.push_back(name); + } + currentDeviceIndex = -1; + } + #else + m_dev_pid_vid.clear(); + m_deviceNames.clear(); + int usbDeviceCount = libusb_get_device_list(ctx, &devs); + if(usbDeviceCount > 0) + { + libusb_device_descriptor desc; + for(int i=0; i(pid,vid)); + } + else if(pid == 241) + { + m_hardwareName = HW_DIGIRED; + libusb_device_handle *tempDev_handle; + tempDev_handle = libusb_open_device_with_vid_pid(ctx, vid, pid); + if(libusb_kernel_driver_active(tempDev_handle, 0) == 1) //find out if kernel driver is attached + { + if(libusb_detach_kernel_driver(tempDev_handle, 0) == 0) //detach it + printf("Kernel Driver Detached!\n"); + } + if(libusb_claim_interface(tempDev_handle, 0) < 0) //claim interface 0 (the first) of device + { + printf("Cannot Claim Interface\n"); + } + + string fullName; + //check operating speed + int speed = libusb_get_device_speed(devs[i]); + if(speed == LIBUSB_SPEED_HIGH) + fullName = "USB 2.0"; + else if(speed == LIBUSB_SPEED_SUPER) + fullName = "USB 3.0"; + else + fullName = "USB"; + fullName += " ("; + //read device name + char data[255]; + memset(data, 0, 255); + int st = libusb_get_string_descriptor_ascii(tempDev_handle, 2, (unsigned char*)data, 255); + if(strlen(data) > 0) + fullName += data; + fullName += ")"; + libusb_close(tempDev_handle); + + m_deviceNames.push_back(fullName); + m_dev_pid_vid.push_back( pair(pid,vid)); + } + } + } + } + else + { + libusb_free_device_list(devs, 1); + return 0; + } + #endif + return m_deviceNames.size(); +} + +void ConnectionUSB::ClearComm() +{ +} + +/** @return name of currently opened device as string. +*/ +string ConnectionUSB::DeviceName() +{ +#ifndef __unix__ + string name; + char tempName[USB_STRING_MAXLEN]; + //memcpy(tempName, USBDevicePrimary->FriendlyName, USB_STRING_MAXLEN); + //name = tempName; + + for (int i = 0; i < USB_STRING_MAXLEN; ++i) + tempName[i] = USBDevicePrimary->DeviceName[i]; + if (USBDevicePrimary->bSuperSpeed == true) + name = "USB 3.0"; + else if (USBDevicePrimary->bHighSpeed == true) + name = "USB 2.0"; + else + name = "USB"; + name += " ("; + name += tempName; + name += ")"; + return name; +#else + if(dev_handle != 0) + { + char data[255]; + int st = libusb_get_string_descriptor_ascii(dev_handle, 2, (unsigned char*)data, 255); + return string(data); + } + return "no name"; +#endif +} + +/** + @brief Starts asynchronous data reading from board + @param *buffer buffer where to store received data + @param length number of bytes to read + @return handle of transfer context +*/ +int ConnectionUSB::BeginDataReading(char *buffer, long length) +{ + int i = 0; + bool contextFound = false; + //find not used context + for(i = 0; iBeginDataXfer((unsigned char*)buffer, length, contexts[i].inOvLap); + return i; + #else + unsigned int Timeout = 1000; + libusb_transfer *tr = contexts[i].transfer; + libusb_fill_bulk_transfer(tr, dev_handle, 0x81, (unsigned char*)buffer, length, callback_libusbtransfer, &contexts[i], Timeout); + contexts[i].done = false; + contexts[i].bytesXfered = 0; + contexts[i].bytesExpected = length; + int status = libusb_submit_transfer(tr); + int actual = 0; + //int status = libusb_bulk_transfer(dev_handle, 0x81, (unsigned char*)buffer, length, &actual, USB_TIMEOUT); + if(status != 0) + printf("ERROR BEGIN DATA TRANSFER %s\n", libusb_error_name(status)); + #endif + return i; +} + +/** + @brief Waits for asynchronous data reception + @param contextHandle handle of which context data to wait + @param timeout_ms number of miliseconds to wait + @return 1-data received, 0-data not received +*/ +int ConnectionUSB::WaitForReading(int contextHandle, unsigned int timeout_ms) +{ + if( contexts[contextHandle].used == true && contextHandle >= 0) + { + int status = 0; + #ifndef __unix__ + if(InEndPt) + status = InEndPt->WaitForXfer(contexts[contextHandle].inOvLap, timeout_ms); + return status; + #else + auto t1 = chrono::high_resolution_clock::now(); + auto t2 = chrono::high_resolution_clock::now(); + while(contexts[contextHandle].done == false && std::chrono::duration_cast(t2 - t1).count() < timeout_ms) + { + struct timeval tv; + tv.tv_sec = 1; + tv.tv_usec = 0; + //if(libusb_handle_events(ctx) != 0) + if(libusb_handle_events_timeout_completed(ctx, &tv, NULL) != 0) + printf("error libusb_handle_events %i\n", status); + t2 = chrono::high_resolution_clock::now(); + std::this_thread::sleep_for(std::chrono::milliseconds(1)); + } + std::unique_lock lck(contexts[contextHandle].m_lock); + while(contexts[contextHandle].done == false) //is changed in libusb callback + { + if(contexts[contextHandle].mPacketProcessed.wait_for(lck, std::chrono::milliseconds(timeout_ms)) == std::cv_status::timeout) + return 0; + } + return contexts[contextHandle].done == true; + #endif + } + else + return 0; +} + +/** + @brief Finishes asynchronous data reading from board + @param buffer array where to store received data + @param length number of bytes to read, function changes this value to number of bytes actually received + @param contextHandle handle of which context to finish + @return false failure, true number of bytes received +*/ +int ConnectionUSB::FinishDataReading(char *buffer, long &length, int contextHandle) +{ + if( contexts[contextHandle].used == true && contextHandle >= 0) + { + #ifndef __unix__ + int status = 0; + if(InEndPt) + status = InEndPt->FinishDataXfer((unsigned char*)buffer, length, contexts[contextHandle].inOvLap, contexts[contextHandle].context); + contexts[contextHandle].used = false; + contexts[contextHandle].reset(); + return length; + #else + length = contexts[contextHandle].bytesXfered; + contexts[contextHandle].used = false; + contexts[contextHandle].reset(); + return length; + #endif + } + else + return 0; +} + +int ConnectionUSB::ReadDataBlocking(char *buffer, long &length, int timeout_ms) +{ +#ifndef __unix__ + return InEndPt->XferData((unsigned char*)buffer, length); +#else + return 0; +#endif +} + + +/** + @brief Aborts reading operations +*/ +void ConnectionUSB::AbortReading() +{ +#ifndef __unix__ + InEndPt->Abort(); +#else + for(int i=0; iBeginDataXfer((unsigned char*)buffer, length, contextsToSend[i].inOvLap); + return i; + #else + unsigned int Timeout = 1000; + libusb_transfer *tr = contextsToSend[i].transfer; + //libusb_set_iso_packet_lengths(contexts[i].transfer, 512*64); + libusb_fill_bulk_transfer(tr, dev_handle, 0x1, (unsigned char*)buffer, length, callback_libusbtransfer, &contextsToSend[i], Timeout); + contextsToSend[i].done = false; + contextsToSend[i].bytesXfered = 0; + contextsToSend[i].bytesExpected = length; + libusb_submit_transfer(tr); + #endif + return i; +} + +/** + @brief Waits for asynchronous data sending + @param contextHandle handle of which context data to wait + @param timeout_ms number of miliseconds to wait + @return 1-data received, 0-data not received +*/ +int ConnectionUSB::WaitForSending(int contextHandle, unsigned int timeout_ms) +{ + if( contextsToSend[contextHandle].used == true ) + { + #ifndef __unix__ + int status = 0; + if(OutEndPt) + status = OutEndPt->WaitForXfer(contextsToSend[contextHandle].inOvLap, timeout_ms); + return status; + #else + auto t1 = chrono::high_resolution_clock::now(); + auto t2 = chrono::high_resolution_clock::now(); + while(contextsToSend[contextHandle].done == false && std::chrono::duration_cast(t2 - t1).count() < timeout_ms) + { + struct timeval tv; + tv.tv_sec = 1; + tv.tv_usec = 0; + int status = libusb_handle_events_timeout_completed(ctx, &tv, NULL); + if(status != 0) + printf("error libusb_handle_events %i\n", status); + t2 = chrono::high_resolution_clock::now(); + std::this_thread::sleep_for(std::chrono::milliseconds(1)); + } + std::unique_lock lck(contextsToSend[contextHandle].m_lock); + while(contextsToSend[contextHandle].done == false) //is changed in libusb callback + { + if(contextsToSend[contextHandle].mPacketProcessed.wait_for(lck, std::chrono::milliseconds(timeout_ms)) == std::cv_status::timeout) + return 0; + } + return contextsToSend[contextHandle].done == true; + #endif + } + else + return 0; +} + +/** + @brief Finishes asynchronous data sending to board + @param buffer array where to store received data + @param length number of bytes to read, function changes this value to number of bytes acctually received + @param contextHandle handle of which context to finish + @return false failure, true number of bytes sent +*/ +int ConnectionUSB::FinishDataSending(const char *buffer, long &length, int contextHandle) +{ + if( contextsToSend[contextHandle].used == true) + { + #ifndef __unix__ + if(OutEndPt) + OutEndPt->FinishDataXfer((unsigned char*)buffer, length, contextsToSend[contextHandle].inOvLap, contextsToSend[contextHandle].context); + contextsToSend[contextHandle].used = false; + contextsToSend[contextHandle].reset(); + return length; + #else + length = contextsToSend[contextHandle].bytesXfered; + contextsToSend[contextHandle].used = false; + contextsToSend[contextHandle].reset(); + return length; + #endif + } + else + return 0; +} + +/** + @brief Aborts sending operations +*/ +void ConnectionUSB::AbortSending() +{ +#ifndef __unix__ + OutEndPt->Abort(); +#else + for (int i = 0; i ConnectionUSB::GetDeviceNames() +{ + return m_deviceNames; +} diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/connectionManager/ConnectionUSB.h b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/connectionManager/ConnectionUSB.h new file mode 100644 index 0000000000..f3048c1842 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/connectionManager/ConnectionUSB.h @@ -0,0 +1,144 @@ +/** +@file ConnectionUSB.h +@author Lime Microsystems (www.limemicro.com) +@brief Class for data writing and reading through USB port +*/ + +#ifndef USB_PORT_CONNECTION_H +#define USB_PORT_CONNECTION_H + +#include "IConnection.h" + +#ifndef __unix__ +#include "windows.h" +#include "CyAPI.h" +#else +#include +#include +#include +#include +#endif + +#define USB_MAX_CONTEXTS 64 //maximum number of contexts for asynchronous transfers + +/** @brief Wrapper class for holding USB asynchronous transfers contexts +*/ +class USBTransferContext +{ +public: + USBTransferContext() : used(false) + { + #ifndef __unix__ + inOvLap = new OVERLAPPED; + memset(inOvLap, 0, sizeof(OVERLAPPED)); + inOvLap->hEvent = CreateEvent(NULL, false, false, NULL); + context = NULL; + #else + transfer = libusb_alloc_transfer(0); + bytesXfered = 0; + bytesExpected = 0; + done = 0; + #endif + } + ~USBTransferContext() + { + #ifndef __unix__ + CloseHandle(inOvLap->hEvent); + delete inOvLap; + #else + libusb_free_transfer(transfer); + #endif + } + bool reset() + { + if(used) + return false; + #ifndef __unix__ + CloseHandle(inOvLap->hEvent); + memset(inOvLap, 0, sizeof(OVERLAPPED)); + inOvLap->hEvent = CreateEvent(NULL, false, false, NULL); + #endif + return true; + } + bool used; + #ifndef __unix__ + PUCHAR context; + OVERLAPPED *inOvLap; + #else + libusb_transfer* transfer; + long bytesXfered; + long bytesExpected; + bool done; + std::mutex m_lock; + std::condition_variable mPacketProcessed; + #endif +}; + +class ConnectionUSB : public IConnection +{ +public: + ConnectionUSB(); + ~ConnectionUSB(); + + void FindDevices(); + DeviceStatus Open(); + DeviceStatus Open(unsigned index); + void Close(); + bool IsOpen(); + int GetOpenedIndex(); + + int Write(const unsigned char *buffer, int length, int timeout_ms = 0); + int Read(unsigned char *buffer, int length, int timeout_ms = 0); + + virtual int BeginDataReading(char *buffer, long length); + virtual int WaitForReading(int contextHandle, unsigned int timeout_ms); + virtual int FinishDataReading(char *buffer, long &length, int contextHandle); + virtual void AbortReading(); + virtual int ReadDataBlocking(char *buffer, long &length, int timeout_ms); + + virtual int BeginDataSending(const char *buffer, long length); + virtual int WaitForSending(int contextHandle, unsigned int timeout_ms); + virtual int FinishDataSending(const char *buffer, long &length, int contextHandle); + virtual void AbortSending(); + + std::vector GetDeviceNames(); + int RefreshDeviceList(); + void ClearComm(); +private: + int currentDeviceIndex; + std::string DeviceName(); + + std::vector m_deviceNames; + std::string m_hardwareName; + int m_hardwareVer; + + USBTransferContext contexts[USB_MAX_CONTEXTS]; + USBTransferContext contextsToSend[USB_MAX_CONTEXTS]; + void Initialize(); + + bool isConnected; + int currentPortIndex; + + #ifndef __unix__ + CCyUSBDevice *USBDevicePrimary; + //control endpoints for DigiRed + CCyControlEndPoint *InCtrlEndPt3; + CCyControlEndPoint *OutCtrlEndPt3; + + //control endpoints for DigiGreen + CCyUSBEndPoint *OutCtrEndPt; + CCyUSBEndPoint *InCtrEndPt; + + //end points for samples reading and writing + CCyUSBEndPoint *InEndPt; + CCyUSBEndPoint *OutEndPt; + + #else + libusb_device **devs; //pointer to pointer of device, used to retrieve a list of devices + libusb_device_handle *dev_handle; //a device handle + libusb_context *ctx; //a libusb session + std::vector > m_dev_pid_vid; + #endif +}; + +#endif diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/connectionManager/IConnection.h b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/connectionManager/IConnection.h new file mode 100644 index 0000000000..5804f1149f --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/connectionManager/IConnection.h @@ -0,0 +1,68 @@ +/** + @file IConnection.h + @author Lime Microsystems + @brief Interface class for connection types +*/ + +#ifndef ICONNECTION_H +#define ICONNECTION_H + +#include +#include + +using namespace std; + +class IConnection +{ +public: + /// Supported connection types. + enum eConnectionType + { + CONNECTION_UNDEFINED = -1, + COM_PORT = 0, + USB_PORT = 1, + SPI_PORT = 2, + //insert new types here + CONNECTION_TYPES_COUNT //used only for memory allocation + }; + + enum DeviceStatus + { + SUCCESS, + FAILURE, + END_POINTS_NOT_FOUND, + CANNOT_CLAIM_INTERFACE + }; + + IConnection() : m_connectionType(CONNECTION_UNDEFINED){}; + virtual ~IConnection(){}; + virtual int RefreshDeviceList() = 0; + virtual DeviceStatus Open(unsigned i) = 0; + virtual void Close() = 0; + virtual bool IsOpen() = 0; + virtual int GetOpenedIndex() = 0; + + virtual int Write(const unsigned char *buffer, int length, int timeout_ms = 0) = 0; + virtual int Read(unsigned char *buffer, int length, int timeout_ms = 0) = 0; + + virtual std::vector GetDeviceNames() = 0; + + virtual eConnectionType GetType() { return m_connectionType; }; + virtual bool SetParam(const char *name, const char* value) {return false;}; + + virtual int BeginDataReading(char *buffer, long length){ return -1; }; + virtual int WaitForReading(int contextHandle, unsigned int timeout_ms){ return 0;}; + virtual int FinishDataReading(char *buffer, long &length, int contextHandle){ return 0;} + virtual void AbortReading(){}; + virtual int ReadDataBlocking(char *buffer, long &length, int timeout_ms){ return 0; } + + virtual int BeginDataSending(const char *buffer, long length){ return -1; }; + virtual int WaitForSending(int contextHandle, unsigned int timeout_ms){ return 0;}; + virtual int FinishDataSending(const char *buffer, long &length, int contextHandle){ return 0;} + virtual void AbortSending(){}; +protected: + eConnectionType m_connectionType; +}; + +#endif + diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/lms7002_defines.h b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/lms7002_defines.h new file mode 100644 index 0000000000..6b06a51c7e --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/lms7002_defines.h @@ -0,0 +1,218 @@ +/** +@file lms7002_defines.h +@author Lime Microsystems +@brief enumerations of available LMS7002M commands and statuses +*/ +#pragma once + +const int LMS_RST_DEACTIVATE = 0; +const int LMS_RST_ACTIVATE = 1; +const int LMS_RST_PULSE = 2; + +enum eLMS_DEV +{ + LMS_DEV_UNKNOWN, + LMS_DEV_EVB6, + LMS_DEV_DIGIGREEN, + LMS_DEV_DIGIRED, + LMS_DEV_EVB7, + LMS_DEV_ZIPPER, + LMS_DEV_SOCKETBOARD, + LMS_DEV_EVB7V2, + LMS_DEV_STREAM, + LMS_DEV_NOVENA, + LMS_DEV_DATASPARK, + LMS_DEV_RFSPARK, + LMS_DEV_LMS6002USB, + LMS_DEV_RFESPARK, + LMS_DEV_SODERA, + + LMS_DEV_COUNT +}; + +const char LMS_DEV_NAMES[][80] = +{ + "UNKNOWN", + "EVB6", + "DigiGreen", + "DigiRed", + "EVB7", + "ZIPPER", + "Socket Board", + "EVB7_v2", + "Stream", + "Novena", + "DataSpark", + "RF-Spark", + "LMS6002-USB Stick", + "RF-ESpark", + "SoDeRa", +}; + +static const char* GetDeviceName(const eLMS_DEV device) +{ + if (LMS_DEV_UNKNOWN < device && device < LMS_DEV_COUNT) + return LMS_DEV_NAMES[device]; + else + return LMS_DEV_NAMES[LMS_DEV_UNKNOWN]; +} + +enum eEXP_BOARD +{ + EXP_BOARD_UNKNOWN, + EXP_BOARD_UNSUPPORTED, + EXP_BOARD_NO, + EXP_BOARD_MYRIAD1, + EXP_BOARD_MYRIAD2, + EXP_BOARD_MYRIAD_NOVENA, + EXP_BOARD_HPM1000, + EXP_BOARD_MYRIAD7, + EXP_BOARD_HPM7, + + EXP_BOARD_COUNT +}; + +const char EXP_BOARD_NAMES[][80] = +{ + "UNKNOWN", + "UNSUPPORTED", + "NOT AVAILABLE", + "Myriad1", + "Myriad2", + "Novena", + "HPM1000", + "Myriad7", + "HMP7" +}; + +static const char* GetExpansionBoardName(const eEXP_BOARD board) +{ + if (EXP_BOARD_UNKNOWN < board && board < EXP_BOARD_COUNT) + return EXP_BOARD_NAMES[board]; + else + return EXP_BOARD_NAMES[EXP_BOARD_UNKNOWN]; +} + +struct LMS64C_Info +{ + unsigned char firmware; + unsigned char deviceType; + unsigned char protocol; + unsigned char hardware; + unsigned char expansionBoard; +}; + +enum eCMD_LMS +{ + CMD_GET_INFO = 0x00, + CMD_LMS6002_RST = 0x10, + ///Writes data to SI5356 synthesizer via I2C + CMD_SI5356_WR = 0x11, + ///Reads data from SI5356 synthesizer via I2C + CMD_SI5356_RD = 0x12, + ///Writes data to SI5351 synthesizer via I2C + CMD_SI5351_WR = 0x13, + ///Reads data from SI5351 synthesizer via I2C + CMD_SI5351_RD = 0x14, + ///PanelBus DVI (HDMI) Transmitter control + CMD_TFP410_WR = 0x15, + ///PanelBus DVI (HDMI) Transmitter control + CMD_TFP410_RD = 0x16, + ///Sets new LMS7002M chip’s RESET pin level (0, 1, pulse) + CMD_LMS7002_RST = 0x20, + ///Writes data to LMS7002M chip via SPI + CMD_LMS7002_WR = 0x21, + ///Reads data from LMS7002M chip via SPI + CMD_LMS7002_RD = 0x22, + ///Writes data to LMS6002 chip via SPI + CMD_LMS6002_WR = 0x23, + ///Reads data from LMS6002 chip via SPI + CMD_LMS6002_RD = 0x24, + + CMD_LMS_LNA = 0x2A, + CMD_LMS_PA = 0x2B, + + CMD_PROG_MCU = 0x2C, + ///Writes data to ADF4002 chip via SPI + CMD_ADF4002_WR = 0x31, + + CMD_USB_FIFO_RST = 0x40, + CMD_PE636040_WR = 0x41, + CMD_PE636040_RD = 0x42, + + CMD_GPIO_WR = 0x51, + CMD_GPIO_RD = 0x52, + + CMD_ALTERA_FPGA_GW_WR = 0x53, + CMD_ALTERA_FPGA_GW_RD = 0x54, + + CMD_BRDSPI_WR = 0x55,//16 bit spi for stream, dataspark control + CMD_BRDSPI_RD = 0x56,//16 bit spi for stream, dataspark control + CMD_BRDSPI8_WR = 0x57, //8 + 8 bit spi for stream, dataspark control + CMD_BRDSPI8_RD = 0x58, //8 + 8 bit spi for stream, dataspark control + + CMD_BRDCONF_WR = 0x5D, //write config data to board + CMD_BRDCONF_RD = 0x5E, //read config data from board + + CMD_ANALOG_VAL_WR = 0x61, //write analog value + CMD_ANALOG_VAL_RD = 0x62, //read analog value + + CMD_MYRIAD_RST = 0x80, + CMD_MYRIAD_WR = 0x81, + CMD_MYRIAD_RD = 0x82, + CMD_MYRIAD_PROG = 0x8C +}; + +enum eCMD_STATUS +{ + STATUS_UNDEFINED, + STATUS_COMPLETED_CMD, + STATUS_UNKNOWN_CMD, + STATUS_BUSY_CMD, + STATUS_MANY_BLOCKS_CMD, + STATUS_ERROR_CMD, + STATUS_WRONG_ORDER_CMD, + STATUS_RESOURCE_DENIED_CMD, + STATUS_COUNT +}; + +static const char status_text[][32]= +{ + "Undefined/Failure", + "Completed", + "Unknown command", + "Busy", + "Too many blocks", + "Error", + "Wrong order", + "Resource denied" +}; + +static const char* status2string(const int status) +{ + if(status >= 0 && status < STATUS_COUNT) + return status_text[status]; + else + return "Unknown status"; +} + +enum eADC_UNITS +{ + RAW, + VOLTAGE, + CURRENT, + RESISTANCE, + POWER, + TEMPERATURE, + ADC_UNITS_COUNT +}; + +static const char adc_units_text[][8] = {"", "V", "A", "Ohm", "W", "C"}; + +static const char* adcUnits2string(const unsigned units) +{ + if (units < ADC_UNITS_COUNT) + return adc_units_text[units]; + else + return " unknown"; +} diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/lmsComms.cpp b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/lmsComms.cpp new file mode 100644 index 0000000000..5b74ef8975 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/lmsComms.cpp @@ -0,0 +1,326 @@ +/** +@file LMScomms.cpp +@author Lime Microsystems (www.limemicro.com) +@brief Implementation of data transmission to LMS boards +*/ + +#include "lmsComms.h" + +LMScomms::LMScomms() +{ + callback_logData = nullptr; + unsigned short test = 0x1234; + unsigned char* bytes = (unsigned char*)&test; + if(bytes[0] == 0x12 && bytes[1] == 0x34) + mSystemBigEndian = true; + else + mSystemBigEndian = false; +} + +LMScomms::~LMScomms() +{ +} + +/** @brief Transfers data between packet and connected device + @param pkt packet containing output data and to receive incomming data + @return 0: success, other: failure +*/ +LMScomms::TransferStatus LMScomms::TransferPacket(GenericPacket& pkt) +{ + std::lock_guard lock(mControlPortLock); + TransferStatus status = TRANSFER_SUCCESS; + if(IsOpen() == false) + return NOT_CONNECTED; + + int packetLen; + eLMS_PROTOCOL protocol = LMS_PROTOCOL_UNDEFINED; + if(activeControlPort->GetType() == IConnection::SPI_PORT) + protocol = LMS_PROTOCOL_NOVENA; + else + protocol = LMS_PROTOCOL_LMS64C; + switch(protocol) + { + case LMS_PROTOCOL_UNDEFINED: + return TRANSFER_FAILED; + case LMS_PROTOCOL_LMS64C: + packetLen = ProtocolLMS64C::pktLength; + break; + case LMS_PROTOCOL_NOVENA: + packetLen = pkt.outBuffer.size() > ProtocolNovena::pktLength ? ProtocolNovena::pktLength : pkt.outBuffer.size(); + break; + default: + packetLen = 0; + return TRANSFER_FAILED; + } + int outLen = 0; + unsigned char* outBuffer = NULL; + outBuffer = PreparePacket(pkt, outLen, protocol); + unsigned char* inBuffer = new unsigned char[outLen]; + memset(inBuffer, 0, outLen); + + int outBufPos = 0; + int inDataPos = 0; + if(outLen == 0) + { + //printf("packet outlen = 0\n"); + outLen = 1; + } + + if(protocol == LMS_PROTOCOL_NOVENA) + { + bool transferData = true; //some commands are fake, so don't need transferring + if(pkt.cmd == CMD_GET_INFO) + { + //spi does not have GET INFO, fake it to inform what device it is + pkt.status = STATUS_COMPLETED_CMD; + pkt.inBuffer.clear(); + pkt.inBuffer.resize(64, 0); + pkt.inBuffer[0] = 0; //firmware + pkt.inBuffer[1] = LMS_DEV_NOVENA; //device + pkt.inBuffer[2] = 0; //protocol + pkt.inBuffer[3] = 0; //hardware + pkt.inBuffer[4] = EXP_BOARD_UNSUPPORTED; //expansion + transferData = false; + } + + if(transferData) + { + if (callback_logData) + callback_logData(true, outBuffer, outLen); + int bytesWritten = Write(outBuffer, outLen); + if( bytesWritten == outLen) + { + if(pkt.cmd == CMD_LMS7002_RD) + { + inDataPos = Read(&inBuffer[inDataPos], outLen); + if(inDataPos != outLen) + status = TRANSFER_FAILED; + else + { + if (callback_logData) + callback_logData(false, inBuffer, inDataPos); + } + } + ParsePacket(pkt, inBuffer, inDataPos, protocol); + } + else + status = TRANSFER_FAILED; + } + } + else + { + for(int i=0; i= 5) + { + info.firmware = pkt.inBuffer[0]; + info.device = pkt.inBuffer[1] < LMS_DEV_COUNT ? (eLMS_DEV)pkt.inBuffer[1] : LMS_DEV_UNKNOWN; + info.protocol = pkt.inBuffer[2]; + info.hardware = pkt.inBuffer[3]; + info.expansion = pkt.inBuffer[4] < EXP_BOARD_COUNT ? (eEXP_BOARD)pkt.inBuffer[4] : EXP_BOARD_UNKNOWN; + } + return info; +} + +/** @brief Takes generic packet and converts to specific protocol buffer + @param pkt generic data packet to convert + @param length returns length of returned buffer + @param protocol which protocol to use for data + @return pointer to data buffer, must be manually deleted after use +*/ +unsigned char* LMScomms::PreparePacket(const GenericPacket& pkt, int& length, const eLMS_PROTOCOL protocol) +{ + unsigned char* buffer = NULL; + if(protocol == LMS_PROTOCOL_UNDEFINED) + return NULL; + + if(protocol == LMS_PROTOCOL_LMS64C) + { + ProtocolLMS64C packet; + int maxDataLength = packet.maxDataLength; + packet.cmd = pkt.cmd; + packet.status = pkt.status; + int byteBlockRatio = 1; //block ratio - how many bytes in one block + switch( packet.cmd ) + { + case CMD_PROG_MCU: + case CMD_GET_INFO: + case CMD_SI5351_RD: + case CMD_SI5356_RD: + byteBlockRatio = 1; + break; + case CMD_SI5351_WR: + case CMD_SI5356_WR: + byteBlockRatio = 2; + break; + case CMD_LMS7002_RD: + case CMD_BRDSPI_RD: + case CMD_BRDSPI8_RD: + byteBlockRatio = 2; + break; + case CMD_ADF4002_WR: + byteBlockRatio = 3; + break; + case CMD_LMS7002_WR: + case CMD_BRDSPI_WR: + case CMD_ANALOG_VAL_WR: + byteBlockRatio = 4; + break; + default: + byteBlockRatio = 1; + } + if (packet.cmd == CMD_LMS7002_RD || packet.cmd == CMD_BRDSPI_RD) + maxDataLength = maxDataLength/2; + if (packet.cmd == CMD_ANALOG_VAL_RD) + maxDataLength = maxDataLength / 4; + int blockCount = pkt.outBuffer.size()/byteBlockRatio; + int bufLen = blockCount/(maxDataLength/byteBlockRatio) + +(blockCount%(maxDataLength/byteBlockRatio)!=0); + bufLen *= packet.pktLength; + if(bufLen == 0) + bufLen = packet.pktLength; + buffer = new unsigned char[bufLen]; + memset(buffer, 0, bufLen); + int srcPos = 0; + for(int j=0; j*packet.pktLength (maxDataLength/byteBlockRatio)) + { + buffer[pktPos+2] = maxDataLength/byteBlockRatio; + blockCount -= buffer[pktPos+2]; + } + else + buffer[pktPos+2] = blockCount; + memcpy(&buffer[pktPos+3], packet.reserved, sizeof(packet.reserved)); + int bytesToPack = (maxDataLength/byteBlockRatio)*byteBlockRatio; + for (int k = 0; k> 8) | 0x80; + buffer[1] = NOVENA_GPIO_ADDR & 0xFF; + buffer[2] = 0x00; + buffer[3] = 0x18; + buffer[4] = (NOVENA_GPIO_ADDR >> 8) | 0x80; + buffer[5] = NOVENA_GPIO_ADDR & 0xFF; + buffer[6] = 0x00; + buffer[7] = 0x38; + length = 8; + } + else + { + buffer = new unsigned char[pkt.outBuffer.size()]; + memcpy(buffer, &pkt.outBuffer[0], pkt.outBuffer.size()); + if (pkt.cmd == CMD_LMS7002_WR) + { + for(int i=0; i callback) +{ + callback_logData = callback; +} diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/lmsComms.h b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/lmsComms.h new file mode 100644 index 0000000000..3d94d8ece2 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/lmsComms.h @@ -0,0 +1,111 @@ +/** +@file LMScomms.h +@author Lime Microsystems (www.limemicro.com) +@brief Class for handling data transmission to LMS boards +*/ + +#ifndef LMS_COMMS_H +#define LMS_COMMS_H + +#include "lms7002_defines.h" +#include "connectionManager/ConnectionManager.h" +#include +#include + +struct LMSinfo +{ + eLMS_DEV device; + eEXP_BOARD expansion; + int firmware; + int hardware; + int protocol; +}; + +/* @brief Class for abstracting transfering data to and from chip +*/ +class LMScomms : public ConnectionManager +{ +public: + enum TransferStatus + { + TRANSFER_SUCCESS, + TRANSFER_FAILED, + NOT_CONNECTED + }; + + enum eLMS_PROTOCOL + { + LMS_PROTOCOL_UNDEFINED = 0, + LMS_PROTOCOL_DIGIC, + LMS_PROTOCOL_LMS64C, + LMS_PROTOCOL_NOVENA, + }; + struct ProtocolDIGIC + { + static const int pktLength = 64; + static const int maxDataLength = 60; + ProtocolDIGIC() : cmd(0), i2cAddr(0), blockCount(0) {}; + unsigned char cmd; + unsigned char i2cAddr; + unsigned char blockCount; + unsigned char reserved; + unsigned char data[maxDataLength]; + }; + + struct ProtocolLMS64C + { + static const int pktLength = 64; + static const int maxDataLength = 56; + ProtocolLMS64C() :cmd(0),status(STATUS_UNDEFINED),blockCount(0) + { + memset(reserved, 0, 5); + }; + unsigned char cmd; + unsigned char status; + unsigned char blockCount; + unsigned char reserved[5]; + unsigned char data[maxDataLength]; + }; + + struct ProtocolNovena + { + static const int pktLength = 128; + static const int maxDataLength = 128; + ProtocolNovena() :cmd(0),status(0) {}; + unsigned char cmd; + unsigned char status; + unsigned char blockCount; + unsigned char data[maxDataLength]; + }; + + struct GenericPacket + { + GenericPacket() + { + cmd = CMD_GET_INFO; + status = STATUS_UNDEFINED; + } + + eCMD_LMS cmd; + eCMD_STATUS status; + vector outBuffer; + vector inBuffer; + }; + + LMScomms(); + ~LMScomms(); + + virtual TransferStatus TransferPacket(GenericPacket &pkt); + LMSinfo GetInfo(); + void SetDataLogCallback(std::function callback); +protected: + std::function callback_logData; + std::mutex mControlPortLock; + unsigned char* PreparePacket(const GenericPacket &pkt, int &length, const eLMS_PROTOCOL protocol); + int ParsePacket(GenericPacket &pkt, const unsigned char* buffer, const int length, const eLMS_PROTOCOL protocol); +protected: + bool mSystemBigEndian; +}; + +#endif // LMS_COMMS_H + diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/typedefs.h b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/typedefs.h new file mode 100644 index 0000000000..9ae0c25d93 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/typedefs.h @@ -0,0 +1,18 @@ +/** +@file typedefs.h +@author Lime Microsystems (www.limemicro.com) +@brief Variables types definitions +*/ + +#ifndef LMS7002M_TYPEDEFS_H +#define LMS7002M_TYPEDEFS_H + +typedef unsigned int uint32_t; +typedef int int32_t; +typedef unsigned short uint16_t; +typedef short int16_t; +typedef signed char int8_t; +typedef unsigned char uint8_t; +typedef double float_type; + +#endif diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/LMS_SDR.cpp b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/LMS_SDR.cpp new file mode 100644 index 0000000000..1ff4bbf1de --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/LMS_SDR.cpp @@ -0,0 +1,334 @@ +/** +@author Lime Microsystems +@brief Stream board communications for Matlab +*/ + +#include "LMS_SDR.h" + +#include "lmsComms.h" +#include "LMS_StreamBoard.h" +#include "ringBuffer.h" +#include "IConnection.h" +#include "fifo.h" +#include "dataTypes.h" +#include +#include + +#include +#include +#include +#include +#include + +#define _USE_MATH_DEFINES +#include + +using namespace std; + +typedef enum +{ + LMS_SUCCESS = 0, + LMS_ERROR +} LMS_STATUS; + +LMS_SamplesFIFO rxBuffer(1); +static thread rxThread; +atomic rxStop(1); +atomic rxRunning(0); +atomic rxDroppedSamples(0); +atomic RxDataRate(0); +atomic rxSamplingRate(0); + +LMS_SamplesFIFO txBuffer(1); +static thread txThread; +atomic txStop(1); +atomic txRunning(0); +atomic txDroppedSamples(0); +atomic TxDataRate(0); +atomic txSamplingRate(0); + +LMScomms comPort(IConnection::COM_PORT); +LMScomms usbPort(IConnection::USB_PORT); +LMS_StreamBoard streamer(&usbPort); + +const int samplesInPacket = 1024; +unsigned int opMode = 0; + +DLL_EXPORT void LMS_Stats(uint32_t *RxBufSize, uint32_t *RxBufFilled, uint32_t *RxSamplingRate, uint32_t *TxBufSize, uint32_t *TxBufFilled, uint32_t *TxSamplingRate) +{ + LMS_SamplesFIFO::BufferInfo rxStats = rxBuffer.GetInfo(); + LMS_SamplesFIFO::BufferInfo txStats = txBuffer.GetInfo(); + if (RxBufSize) + *RxBufSize = rxStats.size*samplesInPacket; + if (RxBufFilled) + *RxBufFilled = rxStats.itemsFilled*samplesInPacket; + if (TxBufSize) + *TxBufSize = txStats.size*samplesInPacket; + if (TxBufFilled) + *TxBufFilled = txStats.itemsFilled*samplesInPacket; + if (TxSamplingRate) + *TxSamplingRate = txSamplingRate.load(); + if (RxSamplingRate) + *RxSamplingRate = rxSamplingRate.load(); +} + +DLL_EXPORT int LMS_Init(const int OperationMode, uint32_t trxBuffersLength) +{ + opMode = OperationMode; + unsigned int packetsNeeded = trxBuffersLength / samplesInPacket; + if (trxBuffersLength % samplesInPacket != 0) + ++packetsNeeded; + if (packetsNeeded >= (uint32_t)(1 << 31)) + packetsNeeded = (uint32_t)(1 << 31); + for (int i = 0; i < 32; ++i) + if ((1 << i) >= packetsNeeded) + { + packetsNeeded = (1 << i); + break; + } + rxBuffer.Reset(packetsNeeded); + txBuffer.Reset(packetsNeeded); + return LMS_SUCCESS; +} + +DLL_EXPORT int LMS_Destroy() +{ + LMS_RxStop(); + //buffers size is reduced to lower memory consumption when not used + rxBuffer.Reset(1); + txBuffer.Reset(1); + return LMS_SUCCESS; +} + +DLL_EXPORT LMScomms* LMS_GetUSBPort() +{ + return &usbPort; +} + +DLL_EXPORT LMScomms* LMS_GetCOMPort() +{ + return &comPort; +} + +const int maxDevListLen = 32; +const int maxDevNameLen = 256; //each device name not longer than 256 +static char DeviceNames[maxDevListLen][maxDevNameLen]; + +DLL_EXPORT int LMS_UpdateDeviceList(LMScomms* port) +{ + memset(DeviceNames, 0, maxDevListLen*maxDevNameLen); + port->Close(); + int devCount = port->RefreshDeviceList(); + vector names = port->GetDeviceList(); + int charsWritten = 0; + for (unsigned int i = 0; i < names.size() && i < maxDevListLen; ++i) + { + charsWritten += sprintf(DeviceNames[i], "[%i] %.*s", i, maxDevNameLen, names[i].c_str()); + } + return devCount; +} + +DLL_EXPORT const char* LMS_GetDeviceName(LMScomms* port, unsigned int deviceIndex) +{ + if (deviceIndex < maxDevListLen) + return DeviceNames[deviceIndex]; + else + return ""; +} + +DLL_EXPORT int LMS_DeviceOpen(LMScomms* port, const uint32_t deviceIndex) +{ + port->Close(); + int status = port->Open(deviceIndex); + if (status == 1) + { + return LMS_SUCCESS; + } + else + { + return LMS_ERROR; + } +} + +DLL_EXPORT void LMS_DeviceClose(LMScomms* port) +{ + port->Close(); +} + +DLL_EXPORT uint32_t LMS_ControlWrite(LMScomms* port, const uint8_t *buffer, const uint16_t bufLen) +{ + return port->Write(buffer, bufLen, 0); +} + +DLL_EXPORT uint32_t LMS_ControlRead(LMScomms* port, uint8_t* buffer, const uint16_t bufLen) +{ + return port->Read(buffer, bufLen, 0); +} + + + +const int RX_BUFF_SZ (1020*1024/4); +uint32_t rx_buffer[RX_BUFF_SZ]; +uint64_t start_timestamp = 0;; +uint32_t wr_pos = 0; +uint32_t rd_pos = 0; + +void ReceivePackets() +{ + rxRunning.store(true); + uint32_t samplesCollected = 0; + + const int bufferSize = 4096;// 4096; + const int buffersCount = 32; // must be power of 2 + const int buffersCountMask = buffersCount - 1; + int handles[buffersCount]= {0}; + char buffers[buffersCount*bufferSize]={0}; + + struct sched_param sp; + sp.sched_priority = sched_get_priority_max(SCHED_FIFO); + if (pthread_setschedparam(pthread_self(),SCHED_FIFO,&sp)!=0) + { + printf("Shed prams failed\n"); + } + + //switch off Rx + uint16_t regVal = streamer.SPI_read(0x0005); + streamer.SPI_write(0x0005, regVal & ~0x6); + //USB FIFO reset + LMScomms::GenericPacket ctrPkt; + ctrPkt.cmd = CMD_USB_FIFO_RST; + ctrPkt.outBuffer.push_back(0x01); + usbPort.TransferPacket(ctrPkt); + ctrPkt.outBuffer[0] = 0x00; + usbPort.TransferPacket(ctrPkt); + + streamer.SPI_write(0x0005, regVal | 0x6); + + streamer.SPI_write(0x0001, 0x0001); + streamer.SPI_write(0x0007, 0x0000); + + for (int i = 0; i 0) + { + PacketLTE* pkt = (PacketLTE*)&buffers[bi*bufferSize]; + for(uint16_t sampleIndex = 0; sampleIndex < sizeof(pkt->samples)/sizeof(int16_t); sampleIndex++) + { + pkt->samples[sampleIndex] <<= 4; + pkt->samples[sampleIndex] >>= 4; + } + + rxBuffer.push_samples((complex16_t*)pkt->samples, 1020, pkt->counter, 100); + } + // Re-submit this request to keep the queue full + memset(&buffers[bi*bufferSize], 0, bufferSize); + handles[bi] = usbPort.BeginDataReading(&buffers[bi*bufferSize], bufferSize); + bi = (bi + 1) & buffersCountMask; + pthread_yield(); + } + + usbPort.AbortReading(); + for (int j = 0; jsamples)[index++]=(((uint32_t*)data)[i]& 0xFFF0FFF) | 0x1000; + + if (index == 1020) + { + pkt->counter = ts; + + if (bufferUsed[bi]) + { + if (usbPort.WaitForSending(handles[bi], 1000) == false) + return -1; + // Must always call FinishDataXfer to release memory of contexts[i] + long tempToSend = sizeof(PacketLTE); + usbPort.FinishDataSending(&buffers[bi*bufferSize], tempToSend, handles[bi]); + + bufferUsed[bi] = false; + } + handles[bi] = usbPort.BeginDataSending(&buffers[bi*bufferSize], sizeof(PacketLTE)); + bufferUsed[bi] = true; + bi = (bi + 1) & buffersCountMask; + pkt = (PacketLTE*)&buffers[bi*bufferSize]; + ts += 1020; + index = 0; + } + } +} + +vector PacketsBuffer(2048, PacketLTE()); +DLL_EXPORT uint32_t LMS_TRxRead(int16_t *buffer, const uint32_t samplesCount, const uint32_t antenna_id, uint64_t *timestamp, const uint32_t timeout_ms) +{ + if (usbPort.IsOpen() == false && opMode != -1) + return 0; + pthread_yield(); + uint32_t samplesPopped = rxBuffer.pop_samples((complex16_t*)buffer, samplesCount, timestamp, timeout_ms); + return samplesPopped; +} + + +DLL_EXPORT int LMS_RxStart() +{ + if (rxRunning.load()) + return 1; + if (usbPort.IsOpen() == false && opMode != -1) + return 1; + rxStop.store(false); + unsigned int bufSz = rxBuffer.GetInfo().size; + rxBuffer.Reset(bufSz); + rxThread = thread(ReceivePackets); + return 0; +} + +DLL_EXPORT int LMS_RxStop() +{ + if (rxRunning.load()) + { + if (rxThread.joinable()) + { + rxStop.store(true); + rxThread.join(); + } + rxStop.store(true); + } + return 0; +} diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/LMS_SDR.h b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/LMS_SDR.h new file mode 100644 index 0000000000..27a72e351a --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/LMS_SDR.h @@ -0,0 +1,143 @@ +/** +@author Lime Microsystems +@brief Interface for implementing SDR using Lime microsystems boards +*/ + +#ifndef LMS_SDR_INTERFACE_H +#define LMS_SDR_INTERFACE_H + +#include + +#ifdef __cplusplus +class LMScomms; +#else +typedef void LMScomms; +#endif + +#define BUILD_DLL +#ifndef __unix__ +#ifdef BUILD_DLL + #define DLL_EXPORT __declspec(dllexport) +#else + #define DLL_EXPORT __declspec(dllimport) +#endif +#else +#define DLL_EXPORT +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +/** @brief Returns stats of internal buffers + @param RxBufSize Receiver buffer size in samples + @param RxBufFilled Number of samples currently in the receiver buffer + @param RxSamplingRate Approximate receiver sampling rate, calculated from incomming data + @param TxBufSize Transmitter buffer size in samples + @param TxBufFilled Number of samples currently in the transmitter buffer + @param TxSamplingRate Approximate transmitter sampling rate, calculated from incomming data +*/ +DLL_EXPORT void LMS_Stats(uint32_t *RxBufSize, uint32_t *RxBufFilled, uint32_t *RxSamplingRate, uint32_t *TxBufSize, uint32_t *TxBufFilled, uint32_t *TxSamplingRate); + +/** @brief Initializes internal memory for samples buffering to hardware + @param OperationMode samples transfering mode: 0-packets synchronized, 1-packets not synchronized + @param trxBuffersLength Rx and Tx internal buffers size in samples + @return 0 success, -1 failure + + Generally trxBuffersSamplesCount should be more than 65536 +*/ +DLL_EXPORT int LMS_Init(const int OperationMode, uint32_t trxBuffersLength); + +/** @brief Stops internal threads and frees internal buffers memory + @return 0 success, -1 failure +*/ +DLL_EXPORT int LMS_Destroy(); + +///@name Device connection +/** @return object for communicating over USB port +*/ +DLL_EXPORT LMScomms* LMS_GetUSBPort(); + +/** @return object for communicating over COM port +*/ +DLL_EXPORT LMScomms* LMS_GetCOMPort(); + +/** @brief Refreshes currently connected device list + @param port Communications port to update + @return number of devices connected +*/ +DLL_EXPORT int LMS_UpdateDeviceList(LMScomms* port); + +/** @brief Returns pointer to static null terminated c-string name of selected device + @param port Communications port object + @param deviceIndex index from communications port device list +*/ +DLL_EXPORT const char* LMS_GetDeviceName(LMScomms* port, unsigned int deviceIndex); + +/** @brief Connects to selected device on given port + @param port Communications port object + @param deviceIndex index from communications port device list + @return 0-success +*/ +DLL_EXPORT int LMS_DeviceOpen(LMScomms* port, const uint32_t deviceIndex); + +/** @brief Closes connection on given port + @param port Communications port to close +*/ +DLL_EXPORT void LMS_DeviceClose(LMScomms* port); +///@} + +///@name Communications +/** @brief Writes given data to control port + @param port Port for communications + @param buffer data to be written + @param bufLen buffer length in bytes + @return number of bytes written +*/ +DLL_EXPORT uint32_t LMS_ControlWrite(LMScomms* port, const uint8_t *buffer, const uint16_t bufLen); + +/** @brief Reads given data from SPI regiter + @param port Port for communications + @param buffer destination buffer for data + @param bufLen number of bytes to read + @return number of bytes read +*/ +DLL_EXPORT uint32_t LMS_ControlRead(LMScomms* port, uint8_t* buffer, const uint16_t bufLen); + +/** @brief Starts thread for samples receiving + @return 0-success +*/ +DLL_EXPORT int LMS_RxStart(); + +/** @brief Stops samples receiving thread + @return 0:success, 1:failed +*/ +DLL_EXPORT int LMS_RxStop(); + +/** @brief Adds given samples to transmitter buffer, to be sent at specified timestamp +@param buffer source array for interleaved values (IQIQIQ...), each value amplitude should be from -2048 to 2047 +@param samplesCount number of samples in buffer, 1 sample = 2 bytes I + 2 bytes Q +@param channel_id destination channel +@param timestamp timestamp when the first sample in buffer should be transmitted (used only in synchronized operating mode) +@param timeout_ms time amount in milliseconds to try adding samples +@return number of samples written +*/ +DLL_EXPORT uint32_t LMS_TRxWrite(const int16_t *buffer, const uint32_t samplesCount, const uint32_t channel_id, uint64_t timestamp); + +/** @brief Reads samples from receiver buffer +@param buffer destination array for interleaved values (IQIQIQ...), must be big enough to store requested number of samples, each value amplitude will be from -2048 to 2047 +@param samplesCount number of samples to read, 1 sample = 2 bytes I + 2 bytes Q +@param antenna_id source channel +@param timestamp returns timestamp of the first sample in the buffer (used only in synchronized operating mode) +@param timeout_ms time amount in milliseconds to try reading samples +@return number of samples read +*/ +DLL_EXPORT uint32_t LMS_TRxRead(int16_t *buffer, const uint32_t samplesCount, const uint32_t channel_id, uint64_t *timestamp, const uint32_t timeout_ms); + +///@} + +#ifdef __cplusplus +} //extern "C" +#endif + +#endif //LMS_SDR_INTERFACE_H diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/LMS_StreamBoard/CMakeLists.txt b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/LMS_StreamBoard/CMakeLists.txt new file mode 100644 index 0000000000..02e6bb5ab9 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/LMS_StreamBoard/CMakeLists.txt @@ -0,0 +1,22 @@ +set(streamBoard_src_files + LMS_StreamBoard.cpp +) + +add_library(LMS_StreamBoard STATIC ${streamBoard_src_files}) +target_include_directories(LMS_StreamBoard PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}) + +target_link_libraries(LMS_StreamBoard ConnectionManager) + +if(WIN32 AND ENABLE_USB_CONNECTION) + find_package(CyAPI REQUIRED) + LINK_DIRECTORIES(${CYAPI_LIBRARIES}) + include_directories(${CYAPI_INCLUDE_DIRS}) + set(CONNECTION_MANAGER_LIBS ${CYAPI_LIBRARIES} SetupAPI) + target_link_libraries(LMS_StreamBoard ${CONNECTION_MANAGER_LIBS}) +endif() +if(UNIX AND ENABLE_USB_CONNECTION) + set(CONNECTION_MANAGER_LIBS usb-1.0 -lpthread) + target_link_libraries(LMS_StreamBoard ${CONNECTION_MANAGER_LIBS}) +endif() + + diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/LMS_StreamBoard/LMS_StreamBoard.cpp b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/LMS_StreamBoard/LMS_StreamBoard.cpp new file mode 100644 index 0000000000..da9e4a7b8e --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/LMS_StreamBoard/LMS_StreamBoard.cpp @@ -0,0 +1,770 @@ +#include "LMS_StreamBoard.h" +#include "lmsComms.h" +#include "lms7002_defines.h" +#include +#include + +/** @brief Configures Stream board FPGA clocks + @param serPort Communications port to send data + @param fOutTx_MHz transmitter frequency in MHz + @param fOutRx_MHz receiver frequency in MHz + @param phaseShift_deg IQ phase shift in degrees + @return 0-success, other-failure +*/ +LMS_StreamBoard::Status LMS_StreamBoard::ConfigurePLL(LMScomms *serPort, const float fOutTx_MHz, const float fOutRx_MHz, const float phaseShift_deg) +{ + assert(serPort != nullptr); + if (serPort == NULL) + return FAILURE; + if (serPort->IsOpen() == false) + return FAILURE; + const float vcoLimits_MHz[2] = { 600, 1300 }; + int M, C; + const short bufSize = 64; + + float fOut_MHz = fOutTx_MHz; + float coef = 0.8*vcoLimits_MHz[1] / fOut_MHz; + M = C = (int)coef; + int chigh = (((int)coef) / 2) + ((int)(coef) % 2); + int clow = ((int)coef) / 2; + + LMScomms::GenericPacket pkt; + pkt.cmd = CMD_BRDSPI_WR; + + if (fOut_MHz*M > vcoLimits_MHz[0] && fOut_MHz*M < vcoLimits_MHz[1]) + { + pkt.outBuffer.push_back(0x00); + pkt.outBuffer.push_back(0x0F); + pkt.outBuffer.push_back(0x15); //c4-c2_bypassed + pkt.outBuffer.push_back(0x01 | ((M % 2 != 0) ? 0x08 : 0x00) | ((C % 2 != 0) ? 0x20 : 0x00)); //N_bypassed + + pkt.outBuffer.push_back(0x00); + pkt.outBuffer.push_back(0x08); + pkt.outBuffer.push_back(1); //N_high_cnt + pkt.outBuffer.push_back(1);//N_low_cnt + pkt.outBuffer.push_back(0x00); + pkt.outBuffer.push_back(0x09); + pkt.outBuffer.push_back(chigh); //M_high_cnt + pkt.outBuffer.push_back(clow); //M_low_cnt + for (int i = 0; i <= 1; ++i) + { + pkt.outBuffer.push_back(0x00); + pkt.outBuffer.push_back(0x0A + i); + pkt.outBuffer.push_back(chigh); //cX_high_cnt + pkt.outBuffer.push_back(clow); //cX_low_cnt + } + + float Fstep_us = 1 / (8 * fOutTx_MHz*C); + float Fstep_deg = (360 * Fstep_us) / (1 / fOutTx_MHz); + short nSteps = phaseShift_deg / Fstep_deg; + unsigned short reg2 = 0x0400 | (nSteps & 0x3FF); + pkt.outBuffer.push_back(0x00); + pkt.outBuffer.push_back(0x02); + pkt.outBuffer.push_back((reg2 >> 8)); + pkt.outBuffer.push_back(reg2); //phase + + pkt.outBuffer.push_back(0x00); + pkt.outBuffer.push_back(0x03); + pkt.outBuffer.push_back(0x00); + pkt.outBuffer.push_back(0x01); + + pkt.outBuffer.push_back(0x00); + pkt.outBuffer.push_back(0x03); + pkt.outBuffer.push_back(0x00); + pkt.outBuffer.push_back(0x00); + + reg2 = reg2 | 0x800; + pkt.outBuffer.push_back(0x00); + pkt.outBuffer.push_back(0x02); + pkt.outBuffer.push_back((reg2 >> 8)); + pkt.outBuffer.push_back(reg2); + + if(serPort->TransferPacket(pkt) != LMScomms::TRANSFER_SUCCESS || pkt.status != STATUS_COMPLETED_CMD) + return FAILURE; + } + else + return FAILURE; + + fOut_MHz = fOutRx_MHz; + coef = 0.8*vcoLimits_MHz[1] / fOut_MHz; + M = C = (int)coef; + chigh = (((int)coef) / 2) + ((int)(coef) % 2); + clow = ((int)coef) / 2; + if (fOut_MHz*M > vcoLimits_MHz[0] && fOut_MHz*M < vcoLimits_MHz[1]) + { + short index = 0; + pkt.outBuffer.clear(); + pkt.outBuffer.push_back(0x00); + pkt.outBuffer.push_back(0x0F); + pkt.outBuffer.push_back(0x15); //c4-c2_bypassed + pkt.outBuffer.push_back(0x41 | ((M % 2 != 0) ? 0x08 : 0x00) | ((C % 2 != 0) ? 0x20 : 0x00)); //N_bypassed, c1 bypassed + + pkt.outBuffer.push_back(0x00); + pkt.outBuffer.push_back(0x08); + pkt.outBuffer.push_back(1); //N_high_cnt + pkt.outBuffer.push_back(1);//N_low_cnt + pkt.outBuffer.push_back(0x00); + pkt.outBuffer.push_back(0x09); + pkt.outBuffer.push_back(chigh); //M_high_cnt + pkt.outBuffer.push_back(clow); //M_low_cnt + for (int i = 0; i <= 1; ++i) + { + pkt.outBuffer.push_back(0x00); + pkt.outBuffer.push_back(0x0A + i); + pkt.outBuffer.push_back(chigh); //cX_high_cnt + pkt.outBuffer.push_back(clow); //cX_low_cnt + } + + pkt.outBuffer.push_back(0x00); + pkt.outBuffer.push_back(0x03); + pkt.outBuffer.push_back(0x00); + pkt.outBuffer.push_back(0x02); + + pkt.outBuffer.push_back(0x00); + pkt.outBuffer.push_back(0x03); + pkt.outBuffer.push_back(0x00); + pkt.outBuffer.push_back(0x00); + + if (serPort->TransferPacket(pkt) != LMScomms::TRANSFER_SUCCESS || pkt.status != STATUS_COMPLETED_CMD) + return FAILURE; + } + else + return FAILURE; + return SUCCESS; +} + +/** @brief Captures IQ samples from Stream board, this is blocking function, it blocks until desired frames count is captured + @param isamples destination array for I samples, must be big enough to contain samplesCount + @param qsamples destination array for Q samples, must be big enough to contain samplesCount + @param framesCount number of IQ frames to capture + @param frameStart frame start indicator 0 or 1 + @return 0-success, other-failure +*/ +LMS_StreamBoard::Status LMS_StreamBoard::CaptureIQSamples(LMScomms *dataPort, int16_t *isamples, int16_t *qsamples, const uint32_t framesCount, const bool frameStart) +{ + assert(dataPort != nullptr); + if (dataPort == NULL) + return FAILURE; + if (dataPort->IsOpen() == false) + return FAILURE; + + int16_t sample_value; + const uint32_t bufSize = framesCount * 2 * sizeof(uint16_t); + char *buffer = new char[bufSize]; + if (buffer == 0) + { +#ifndef NDEBUG + std::cout << "Failed to allocate memory for samples buffer" << std::endl; +#endif + return FAILURE; + } + memset(buffer, 0, bufSize); + + LMScomms::GenericPacket pkt; + pkt.cmd = CMD_BRDSPI_RD; + pkt.outBuffer.push_back(0x00); + pkt.outBuffer.push_back(0x05); + dataPort->TransferPacket(pkt); + if (pkt.status != STATUS_COMPLETED_CMD) + return FAILURE; + + uint16_t regVal = (pkt.inBuffer[2] * 256) + pkt.inBuffer[3]; + pkt.cmd = CMD_BRDSPI_WR; + pkt.outBuffer.clear(); + pkt.outBuffer.push_back(0x00); + pkt.outBuffer.push_back(0x05); + pkt.outBuffer.push_back(0); + pkt.outBuffer.push_back(regVal | 0x4); + dataPort->TransferPacket(pkt); + if (pkt.status != STATUS_COMPLETED_CMD) + return FAILURE; + + int bytesReceived = 0; + for(int i = 0; i<3; ++i) + bytesReceived = dataPort->ReadStream(buffer, bufSize, 5000); + if (bytesReceived > 0) + { + bool iqSelect = false; + int16_t frameCounter = 0; + for (uint32_t b = 0; b < bufSize;) + { + sample_value = buffer[b++] & 0xFF; + sample_value |= (buffer[b++] & 0x0F) << 8; + sample_value = sample_value << 4; //shift left then right to fill sign bits + sample_value = sample_value >> 4; + if (iqSelect == false) + isamples[frameCounter] = sample_value; + else + qsamples[frameCounter] = sample_value; + frameCounter += iqSelect; + iqSelect = !iqSelect; + } + } + pkt.cmd = CMD_BRDSPI_RD; + pkt.outBuffer.clear(); + pkt.outBuffer.push_back(0x00); + pkt.outBuffer.push_back(0x01); + pkt.outBuffer.push_back(0x00); + pkt.outBuffer.push_back(0x05); + dataPort->TransferPacket(pkt); + + regVal = (pkt.inBuffer[2] * 256) + pkt.inBuffer[3]; + pkt.cmd = CMD_BRDSPI_WR; + pkt.outBuffer.clear(); + pkt.outBuffer.push_back(0x00); + pkt.outBuffer.push_back(0x05); + pkt.outBuffer.push_back(0); + pkt.outBuffer.push_back(regVal & ~0x4); + dataPort->TransferPacket(pkt); + + delete[] buffer; + return SUCCESS; +} + +/** @brief Blocking operation to upload IQ samples to Stream board RAM + @param serPort port to use for communication + @param isamples I channel samples + @param qsamples Q channel samples + @param framesCount number of samples in arrays + @return 0-success, other-failure +*/ +LMS_StreamBoard::Status LMS_StreamBoard::UploadIQSamples(LMScomms* serPort, int16_t *isamples, int16_t *qsamples, const uint32_t framesCount) +{ + int bufferSize = framesCount * 2; + uint16_t *buffer = new uint16_t[bufferSize]; + memset(buffer, 0, bufferSize*sizeof(uint16_t)); + int bufPos = 0; + for (unsigned i = 0; iTransferPacket(pkt); + pkt.cmd = CMD_BRDSPI_WR; + pkt.outBuffer.clear(); + pkt.outBuffer.push_back(0x00); + pkt.outBuffer.push_back(0x05); + pkt.outBuffer.push_back(pkt.inBuffer[2]); + pkt.outBuffer.push_back(pkt.inBuffer[3] & ~0x7); + serPort->TransferPacket(pkt); + + while (sent packetSize ? packetSize : outLen - sent; + long toSend = toSendBytes; + int context = serPort->BeginDataSending(&outBuf[sent], toSend); + if (serPort->WaitForSending(context, 5000) == false) + { + success = false; + serPort->FinishDataSending(&outBuf[sent], toSend, context); + break; + } + sent += serPort->FinishDataSending(&outBuf[sent], toSend, context); + } + + pkt.cmd = CMD_BRDSPI_RD; + pkt.outBuffer.push_back(0x00); + pkt.outBuffer.push_back(0x05); + + serPort->TransferPacket(pkt); + pkt.cmd = CMD_BRDSPI_WR; + pkt.outBuffer.clear(); + pkt.outBuffer.push_back(0x00); + pkt.outBuffer.push_back(0x05); + pkt.outBuffer.push_back(pkt.inBuffer[2]); + pkt.outBuffer.push_back(pkt.inBuffer[3] | 0x3); + serPort->TransferPacket(pkt); + return success ? SUCCESS : FAILURE; +} + +LMS_StreamBoard::LMS_StreamBoard(LMScomms* dataPort) +{ + mRxFrameStart.store(true); + mDataPort = dataPort; + mRxFIFO = new LMS_StreamBoard_FIFO(1024*4); + mTxFIFO = new LMS_StreamBoard_FIFO(1024*4); + mStreamRunning.store(false); + mTxCyclicRunning.store(false); +} + +LMS_StreamBoard::~LMS_StreamBoard() +{ + StopReceiving(); + delete mRxFIFO; + delete mTxFIFO; +} + +/** @brief Crates threads for packets receiving, processing and transmitting +*/ +LMS_StreamBoard::Status LMS_StreamBoard::StartReceiving(unsigned int fftSize) +{ + if (mStreamRunning.load() == true) + return FAILURE; + if (mDataPort->IsOpen() == false) + return FAILURE; + mRxFIFO->reset(); + stopRx.store(false); + threadRx = std::thread(ReceivePackets, this); + mStreamRunning.store(true); + return SUCCESS; +} + +/** @brief Stops receiving, processing and transmitting threads +*/ +LMS_StreamBoard::Status LMS_StreamBoard::StopReceiving() +{ + if (mStreamRunning.load() == false) + return FAILURE; + stopTx.store(true); + stopRx.store(true); + threadRx.join(); + mStreamRunning.store(false); + return SUCCESS; +} + +/** @brief Function dedicated for receiving data samples from board +*/ +void LMS_StreamBoard::ReceivePackets(LMS_StreamBoard* pthis) +{ + SamplesPacket pkt; + int samplesCollected = 0; + auto t1 = chrono::high_resolution_clock::now(); + auto t2 = chrono::high_resolution_clock::now(); + + const int buffer_size = 65536;// 4096; + const int buffers_count = 16; // must be power of 2 + const int buffers_count_mask = buffers_count - 1; + int handles[buffers_count]; + memset(handles, 0, sizeof(int)*buffers_count); + char *buffers = NULL; + buffers = new char[buffers_count*buffer_size]; + if (buffers == 0) + { + printf("error allocating buffers\n"); + return; + } + memset(buffers, 0, buffers_count*buffer_size); + + //USB FIFO reset + LMScomms::GenericPacket ctrPkt; + ctrPkt.cmd = CMD_USB_FIFO_RST; + ctrPkt.outBuffer.push_back(0x01); + pthis->mDataPort->TransferPacket(ctrPkt); + ctrPkt.outBuffer[0] = 0x00; + pthis->mDataPort->TransferPacket(ctrPkt); + + uint16_t regVal = pthis->SPI_read(0x0005); + pthis->SPI_write(0x0005, regVal | 0x4); + + for (int i = 0; imDataPort->BeginDataReading(&buffers[i*buffer_size], buffer_size); + + int bi = 0; + int packetsReceived = 0; + unsigned long BytesReceived = 0; + int m_bufferFailures = 0; + short sample; + + bool frameStart = pthis->mRxFrameStart.load(); + while (pthis->stopRx.load() == false) + { + if (pthis->mDataPort->WaitForReading(handles[bi], 1000) == false) + ++m_bufferFailures; + + long bytesToRead = buffer_size; + long bytesReceived = pthis->mDataPort->FinishDataReading(&buffers[bi*buffer_size], bytesToRead, handles[bi]); + if (bytesReceived > 0) + { + ++packetsReceived; + BytesReceived += bytesReceived; + char* bufStart = &buffers[bi*buffer_size]; + + for (int p = 0; p < bytesReceived; p+=2) + { + if (samplesCollected == 0) //find frame start + { + int frameStartOffset = FindFrameStart(&bufStart[p], bytesReceived-p, frameStart); + if (frameStartOffset < 0) + break; //frame start was not found, move on to next buffer + p += frameStartOffset; + } + sample = (bufStart[p+1] & 0x0F); + sample = sample << 8; + sample |= (bufStart[p] & 0xFF); + sample = sample << 4; + sample = sample >> 4; + pkt.iqdata[samplesCollected] = sample; + ++samplesCollected; + if (pkt.samplesCount == samplesCollected) + { + samplesCollected = 0; + if (pthis->mRxFIFO->push_back(pkt, 200) == false) + ++m_bufferFailures; + } + } + } + else + { + ++m_bufferFailures; + } + + t2 = chrono::high_resolution_clock::now(); + long timePeriod = std::chrono::duration_cast(t2 - t1).count(); + if (timePeriod >= 1000) + { + // periodically update frame start, user might change it during operation + frameStart = pthis->mRxFrameStart.load(); + float m_dataRate = 1000.0*BytesReceived / timePeriod; + t1 = t2; + BytesReceived = 0; + LMS_StreamBoard_FIFO::Status rxstats = pthis->mRxFIFO->GetStatus(); + + pthis->mRxDataRate.store(m_dataRate); + pthis->mRxFIFOfilled.store(100.0*rxstats.filledElements / rxstats.maxElements); +#ifndef NDEBUG + printf("Rx: %.1f%% \t rate: %.0f kB/s failures:%i\n", 100.0*rxstats.filledElements / rxstats.maxElements, m_dataRate / 1000.0, m_bufferFailures); +#endif + m_bufferFailures = 0; + } + + // Re-submit this request to keep the queue full + memset(&buffers[bi*buffer_size], 0, buffer_size); + handles[bi] = pthis->mDataPort->BeginDataReading(&buffers[bi*buffer_size], buffer_size); + bi = (bi + 1) & buffers_count_mask; + } + pthis->mDataPort->AbortReading(); + for (int j = 0; jmDataPort->WaitForReading(handles[j], 1000); + pthis->mDataPort->FinishDataReading(&buffers[j*buffer_size], bytesToRead, handles[j]); + } + + regVal = pthis->SPI_read(0x0005); + pthis->SPI_write(0x0005, regVal & ~0x4); + + delete[] buffers; +#ifndef NDEBUG + printf("Rx finished\n"); +#endif +} + +/** @brief Function dedicated for transmitting samples to board +*/ +void LMS_StreamBoard::TransmitPackets(LMS_StreamBoard* pthis) +{ + const int packetsToBatch = 16; + const int buffer_size = sizeof(SamplesPacket)*packetsToBatch; + const int buffers_count = 16; // must be power of 2 + const int buffers_count_mask = buffers_count - 1; + int handles[buffers_count]; + memset(handles, 0, sizeof(int)*buffers_count); + char *buffers = NULL; + buffers = new char[buffers_count*buffer_size]; + if (buffers == 0) + { + printf("error allocating buffers\n"); + } + memset(buffers, 0, buffers_count*buffer_size); + bool *bufferUsed = new bool[buffers_count]; + memset(bufferUsed, 0, sizeof(bool)*buffers_count); + + int bi = 0; //buffer index + + SamplesPacket* pkt = new SamplesPacket[packetsToBatch]; + int m_bufferFailures = 0; + long bytesSent = 0; + auto t1 = chrono::high_resolution_clock::now(); + auto t2 = chrono::high_resolution_clock::now(); + long totalBytesSent = 0; + + unsigned long outputCounter = 0; + + while (pthis->stopTx.load() == false) + { + for (int i = 0; i < packetsToBatch; ++i) + { + if (pthis->mTxFIFO->pop_front(&pkt[i], 200) == false) + { + printf("Error popping from TX\n"); + if (pthis->stopTx.load() == false) + break; + continue; + } + } + //wait for desired slot buffer to be transferred + if (bufferUsed[bi]) + { + if (pthis->mDataPort->WaitForSending(handles[bi], 1000) == false) + { + ++m_bufferFailures; + } + // Must always call FinishDataXfer to release memory of contexts[i] + long bytesToSend = buffer_size; + bytesSent = pthis->mDataPort->FinishDataSending(&buffers[bi*buffer_size], bytesToSend, handles[bi]); + if (bytesSent > 0) + totalBytesSent += bytesSent; + else + ++m_bufferFailures; + bufferUsed[bi] = false; + } + + memcpy(&buffers[bi*buffer_size], &pkt[0], sizeof(SamplesPacket)*packetsToBatch); + handles[bi] = pthis->mDataPort->BeginDataSending(&buffers[bi*buffer_size], buffer_size); + bufferUsed[bi] = true; + + t2 = chrono::high_resolution_clock::now(); + long timePeriod = std::chrono::duration_cast(t2 - t1).count(); + if (timePeriod >= 1000) + { + float m_dataRate = 1000.0*totalBytesSent / timePeriod; + t1 = t2; + totalBytesSent = 0; +#ifndef NDEBUG + cout << "Tx rate: " << m_dataRate / 1000 << " kB/s\t failures: " << m_bufferFailures << endl; +#endif + LMS_StreamBoard_FIFO::Status txstats = pthis->mTxFIFO->GetStatus(); + pthis->mTxDataRate.store(m_dataRate); + pthis->mTxFIFOfilled.store(100.0*txstats.filledElements / txstats.maxElements); + m_bufferFailures = 0; + } + bi = (bi + 1) & buffers_count_mask; + } + + // Wait for all the queued requests to be cancelled + pthis->mDataPort->AbortSending(); + for (int j = 0; jmDataPort->WaitForSending(handles[j], 1000); + pthis->mDataPort->FinishDataSending(&buffers[j*buffer_size], bytesToSend, handles[j]); + } + } + + delete[] buffers; + delete[] bufferUsed; + delete[] pkt; +#ifndef NDEBUG + printf("Tx finished\n"); +#endif +} + +/** @brief Returns current data state for user interface +*/ +LMS_StreamBoard::DataToGUI LMS_StreamBoard::GetIncomingData() +{ + std::unique_lock lck(mLockIncomingPacket); + return mIncomingPacket; +} + +/** @brief Returns data rate info and Tx Rx FIFO fill percentage +*/ +LMS_StreamBoard::ProgressStats LMS_StreamBoard::GetStats() +{ + ProgressStats stats; + stats.RxRate_Bps = mRxDataRate.load(); + stats.TxRate_Bps = mTxDataRate.load(); + stats.RxFIFOfilled = mRxFIFOfilled.load(); + stats.TxFIFOfilled = mTxFIFOfilled.load(); + return stats; +} + +/** @brief Helper function to write board spi regiters + @param address spi address + @param data register value +*/ +LMS_StreamBoard::Status LMS_StreamBoard::SPI_write(uint16_t address, uint16_t data) +{ + assert(mDataPort != nullptr); + LMScomms::GenericPacket ctrPkt; + ctrPkt.cmd = CMD_BRDSPI_WR; + ctrPkt.outBuffer.push_back((address >> 8) & 0xFF); + ctrPkt.outBuffer.push_back(address & 0xFF); + ctrPkt.outBuffer.push_back((data >> 8) & 0xFF); + ctrPkt.outBuffer.push_back(data & 0xFF); + mDataPort->TransferPacket(ctrPkt); + return ctrPkt.status == 1 ? SUCCESS : FAILURE; +} + +/** @brief Helper function to read board spi registers + @param address spi address + @return register value +*/ +uint16_t LMS_StreamBoard::SPI_read(uint16_t address) +{ + assert(mDataPort != nullptr); + LMScomms::GenericPacket ctrPkt; + ctrPkt.cmd = CMD_BRDSPI_RD; + ctrPkt.outBuffer.push_back((address >> 8) & 0xFF); + ctrPkt.outBuffer.push_back(address & 0xFF); + mDataPort->TransferPacket(ctrPkt); + if (ctrPkt.status == STATUS_COMPLETED_CMD && ctrPkt.inBuffer.size() >= 4) + return ctrPkt.inBuffer[2] * 256 + ctrPkt.inBuffer[3]; + else + return 0; +} + +/** @brief Changes which frame start to look for when receiving data +*/ +void LMS_StreamBoard::SetRxFrameStart(const bool startValue) +{ + mRxFrameStart.store(startValue); +} + +/** @brief Searches for frame start index in given buffer + @return frameStart index in buffer, -1 if frame start was not found + Frame start indicator is 13th bit inside each I and Q sample +*/ +int LMS_StreamBoard::FindFrameStart(const char* buffer, const int bufLen, const bool frameStart) +{ + int startIndex = -1; + for (int i = 0; i < bufLen; i+=2) + if ((buffer[i+1] & 0x10)>0 == frameStart) + { + startIndex = i; + break; + } + return startIndex; +} + +/** @brief Starts a thread for continuous cyclic transmitting of given samples + @param isamples I channel samples + @param qsamples Q channel samples + @param framesCount number of samples in given arrays + @return 0:success, other:failure +*/ +LMS_StreamBoard::Status LMS_StreamBoard::StartCyclicTransmitting(const int16_t* isamples, const int16_t* qsamples, uint32_t framesCount) +{ + if (mDataPort->IsOpen() == false) + return FAILURE; + + stopTxCyclic.store(false); + threadTxCyclic = std::thread([](LMS_StreamBoard* pthis) + { + const int buffer_size = 65536; + const int buffers_count = 16; // must be power of 2 + const int buffers_count_mask = buffers_count - 1; + int handles[buffers_count]; + memset(handles, 0, sizeof(int)*buffers_count); + char *buffers = NULL; + buffers = new char[buffers_count*buffer_size]; + if (buffers == 0) + { + printf("error allocating buffers\n"); + return 0; + } + memset(buffers, 0, buffers_count*buffer_size); + + //timers for data rate calculation + auto t1 = chrono::high_resolution_clock::now(); + auto t2 = chrono::high_resolution_clock::now(); + + int bi = 0; //buffer index + + //setup output data + int dataIndex = 0; + for (int i = 0; i < buffers_count; ++i) + { + for (int j = 0; j < buffer_size; ++j) + { + buffers[i*buffer_size + j] = pthis->mCyclicTransmittingSourceData[dataIndex]; + ++dataIndex; + if (dataIndex > pthis->mCyclicTransmittingSourceData.size()) + dataIndex = 0; + } + } + + for (int i = 0; i < buffers_count; ++i) + handles[i] = pthis->mDataPort->BeginDataSending(&buffers[i*buffer_size], buffer_size); + + int m_bufferFailures = 0; + int bytesSent = 0; + int totalBytesSent = 0; + int sleepTime = 200; + while (pthis->stopTxCyclic.load() != true) + { + if (pthis->mDataPort->WaitForSending(handles[bi], 1000) == false) + { + ++m_bufferFailures; + } + long bytesToSend = buffer_size; + bytesSent = pthis->mDataPort->FinishDataSending(&buffers[bi*buffer_size], bytesToSend, handles[bi]); + if (bytesSent > 0) + totalBytesSent += bytesSent; + else + { + ++m_bufferFailures; + } + + t2 = chrono::high_resolution_clock::now(); + long timePeriod = std::chrono::duration_cast(t2 - t1).count(); + if (timePeriod >= 1000) + { + pthis->mTxDataRate.store(1000.0*totalBytesSent / timePeriod); + t1 = t2; + totalBytesSent = 0; +#ifndef NDEBUG + printf("Upload rate: %f\t failures:%li\n", 1000.0*totalBytesSent / timePeriod, m_bufferFailures); +#endif + m_bufferFailures = 0; + } + + //fill up next buffer + for (int j = 0; j < buffer_size; ++j) + { + buffers[bi*buffer_size + j] = pthis->mCyclicTransmittingSourceData[dataIndex]; + ++dataIndex; + if (dataIndex >= pthis->mCyclicTransmittingSourceData.size()) + dataIndex = 0; + } + + // Re-submit this request to keep the queue full + handles[bi] = pthis->mDataPort->BeginDataSending(&buffers[bi*buffer_size], buffer_size); + bi = (bi + 1) & buffers_count_mask; + } + + // Wait for all the queued requests to be cancelled + pthis->mDataPort->AbortSending(); + for (int j = 0; j < buffers_count; j++) + { + long bytesToSend = buffer_size; + pthis->mDataPort->WaitForSending(handles[j], 1000); + pthis->mDataPort->FinishDataSending(&buffers[j*buffer_size], bytesToSend, handles[j]); + } +#ifndef NDEBUG + printf("Cyclic transmitting FULLY STOPPED\n"); +#endif + delete[] buffers; + return 0; + }, this); + mTxCyclicRunning.store(true); + + return LMS_StreamBoard::SUCCESS; +} + +/** @brief Stops cyclic transmitting thread +*/ +LMS_StreamBoard::Status LMS_StreamBoard::StopCyclicTransmitting() +{ + stopTxCyclic.store(true); + if (mTxCyclicRunning.load() == true) + { + threadTxCyclic.join(); + mTxCyclicRunning.store(false); + } + return LMS_StreamBoard::SUCCESS; +} diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/LMS_StreamBoard/LMS_StreamBoard.h b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/LMS_StreamBoard/LMS_StreamBoard.h new file mode 100644 index 0000000000..99b3636336 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/LMS_StreamBoard/LMS_StreamBoard.h @@ -0,0 +1,107 @@ +#ifndef STREAM_BOARD_API_H +#define STREAM_BOARD_API_H + +#include +#include +#include +#include +#include "LMS_StreamBoard_FIFO.h" + +class LMScomms; + +class LMS_StreamBoard +{ +public: + struct SamplesPacket + { + public: + SamplesPacket() : channel(0) + {} + ~SamplesPacket() + {} + + SamplesPacket& operator=(const SamplesPacket& obj) + { + memcpy(this->iqdata, obj.iqdata, sizeof(float)*samplesCount); + this->channel = obj.channel; + return *this; + } + const static int samplesCount = 32768; + float iqdata[samplesCount]; + int channel; + }; + + + enum Status + { + SUCCESS, + FAILURE, + }; + + static Status CaptureIQSamples(LMScomms* serPort, int16_t *isamples, int16_t *qsamples, uint32_t framesCount, bool frameStart); + static Status UploadIQSamples(LMScomms* serPort, int16_t *isamples, int16_t *qsamples, uint32_t framesCount); + static Status ConfigurePLL(LMScomms *serPort, const float fOutTx_MHz, const float fOutRx_MHz, const float phaseShift_deg); + + struct DataToGUI + { + std::vector samplesI; + std::vector samplesQ; + std::vector fftBins_dbFS; + float nyquist_MHz; + }; + + struct ProgressStats + { + float RxRate_Bps; + float TxRate_Bps; + float RxFIFOfilled; + float TxFIFOfilled; + }; + + LMS_StreamBoard(LMScomms* dataPort); + virtual ~LMS_StreamBoard(); + + void SetRxFrameStart(const bool startValue); + virtual Status StartReceiving(unsigned int fftSize); + virtual Status StopReceiving(); + + virtual Status StartCyclicTransmitting(const int16_t* isamples, const int16_t* qsamples, uint32_t framesCount); + virtual Status StopCyclicTransmitting(); + + DataToGUI GetIncomingData(); + ProgressStats GetStats(); + + Status SPI_write(uint16_t address, uint16_t data); + uint16_t SPI_read(uint16_t address); +protected: + static int FindFrameStart(const char* buffer, const int bufLen, const bool frameStart); + std::mutex mLockIncomingPacket; + DataToGUI mIncomingPacket; + + LMS_StreamBoard_FIFO *mRxFIFO; + LMS_StreamBoard_FIFO *mTxFIFO; + + static void ReceivePackets(LMS_StreamBoard* pthis); + static void TransmitPackets(LMS_StreamBoard* pthis); + + std::atomic_bool mRxFrameStart; + std::atomic_bool mStreamRunning; + std::atomic_bool stopRx; + std::atomic_bool stopTx; + + std::thread threadRx; + std::thread threadTx; + LMScomms* mDataPort; + + std::atomic mRxDataRate; + std::atomic mTxDataRate; + std::atomic mRxFIFOfilled; + std::atomic mTxFIFOfilled; + + std::vector mCyclicTransmittingSourceData; + std::atomic_bool mTxCyclicRunning; + std::thread threadTxCyclic; + std::atomic_bool stopTxCyclic; +}; +#endif + diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/LMS_StreamBoard/LMS_StreamBoard_FIFO.h b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/LMS_StreamBoard/LMS_StreamBoard_FIFO.h new file mode 100644 index 0000000000..833f7a37c0 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/LMS_StreamBoard/LMS_StreamBoard_FIFO.h @@ -0,0 +1,122 @@ +/** +@file LMS_StreamBoard_FIFO.h +@author Lime Microsystems (www.limemicro.com) +@brief blocking FIFO for packets storing +*/ + +#ifndef LMS_STREAMBOARD_FIFO_H +#define LMS_STREAMBOARD_FIFO_H + +#include +#include +#include +#include +#include +#include +#include + +template +class LMS_StreamBoard_FIFO +{ +private: + LMS_StreamBoard_FIFO(){}; +public: + struct Status + { + uint32_t maxElements; + uint32_t filledElements; + uint32_t head; + uint32_t tail; + }; + + LMS_StreamBoard_FIFO(uint64_t FIFO_length) + { + mHead = 0; + mTail = 0; + mElements.resize(FIFO_length); + mElementsFilled = 0; + } + + ~LMS_StreamBoard_FIFO() + { + + } + + /** @brief Copies given src element to queue. + @param src Source data + @return true if element was inserted + + Copies element to queue. This function blocks until element is copied to + queue or certain amount of time has passed. + */ + bool push_back(const T &src, unsigned int timeout_ms = 200) + { + std::unique_lock lck(mElementsLock); + while (mElementsFilled == mElements.size()) + { + if (canWrite.wait_for(lck, std::chrono::milliseconds(timeout_ms)) == std::cv_status::timeout) + return false; + } + memcpy(&mElements[mTail], &src, sizeof(T)); + mTail = (mTail+1) % mElements.size(); + ++mElementsFilled; + canRead.notify_one(); + return true; + } + + /** @brief Copies and removes first element from queue to dest. + @param dest destination container for data + @return true if element was copied + Copies element from queue to destination and then removes it. + This function blocks until element is returned, or certain amount of time + has passed. + */ + bool pop_front(T *dest, unsigned int timeout_ms = 200) + { + assert(dest != nullptr); + std::unique_lock lck(mElementsLock); + while (mElementsFilled == 0) + { + if (canRead.wait_for(lck, std::chrono::milliseconds(timeout_ms)) == std::cv_status::timeout) + return false; + } + if (mElementsFilled == 0) + return false; + *dest = mElements[mHead]; + memcpy(dest, &mElements[mHead], sizeof(T)); + mHead = (mHead + 1) % mElements.size(); + --mElementsFilled; + canWrite.notify_one(); + return true; + } + void reset() + { + std::unique_lock lck(mElementsLock); + mElementsFilled = 0; + mHead = 0; + mTail = 0; + } + + Status GetStatus() + { + Status stats; + std::unique_lock lck(mElementsLock); + stats.maxElements = mElements.size(); + stats.filledElements = mElementsFilled; + stats.head = mHead; + stats.tail = mTail; + return stats; + }; + +protected: + uint32_t mHead; //reading pos + uint32_t mTail; //writing pos + uint32_t mElementsFilled; + + std::mutex mElementsLock; // condition variable for critical section + std::vector mElements; + std::condition_variable canWrite; + std::condition_variable canRead; +}; + +#endif // LMS_STREAMBOARD_FIFO_H diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/LMS_StreamBoard/lms7002_defines.h b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/LMS_StreamBoard/lms7002_defines.h new file mode 100644 index 0000000000..c098dfe965 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/LMS_StreamBoard/lms7002_defines.h @@ -0,0 +1,215 @@ +/** +@file lms7002_defines.h +@author Lime Microsystems +@brief enumerations of available LMS7002M commands and statuses +*/ +#pragma once + +const int LMS_RST_DEACTIVATE = 0; +const int LMS_RST_ACTIVATE = 1; +const int LMS_RST_PULSE = 2; + +enum eLMS_DEV +{ + LMS_DEV_UNKNOWN, + LMS_DEV_EVB6, + LMS_DEV_DIGIGREEN, + LMS_DEV_DIGIRED, + LMS_DEV_EVB7, + LMS_DEV_ZIPPER, + LMS_DEV_SOCKETBOARD, + LMS_DEV_EVB7V2, + LMS_DEV_STREAM, + LMS_DEV_NOVENA, + LMS_DEV_DATASPARK, + LMS_DEV_RFSPARK, + LMS_DEV_LMS6002USB, + LMS_DEV_RFESPARK, + + LMS_DEV_COUNT +}; + +const char LMS_DEV_NAMES[][80] = +{ + "UNKNOWN", + "EVB6", + "DigiGreen", + "DigiRed", + "EVB7", + "ZIPPER", + "Socket Board", + "EVB7_v2", + "Stream", + "Novena", + "DataSpark", + "RF-Spark", + "LMS6002-USB Stick", + "RF-ESpark" +}; + +static const char* GetDeviceName(const eLMS_DEV device) +{ + if (LMS_DEV_UNKNOWN < device && device < LMS_DEV_COUNT) + return LMS_DEV_NAMES[device]; + else + return LMS_DEV_NAMES[LMS_DEV_UNKNOWN]; +} + +enum eEXP_BOARD +{ + EXP_BOARD_UNKNOWN, + EXP_BOARD_UNSUPPORTED, + EXP_BOARD_NO, + EXP_BOARD_MYRIAD1, + EXP_BOARD_MYRIAD2, + EXP_BOARD_MYRIAD_NOVENA, + EXP_BOARD_HPM1000, + EXP_BOARD_MYRIAD7, + EXP_BOARD_HPM7, + + EXP_BOARD_COUNT +}; + +const char EXP_BOARD_NAMES[][80] = +{ + "UNKNOWN", + "UNSUPPORTED", + "NOT AVAILABLE", + "Myriad1", + "Myriad2", + "Novena", + "HPM1000", + "Myriad7", + "HMP7" +}; + +static const char* GetExpansionBoardName(const eEXP_BOARD board) +{ + if (EXP_BOARD_UNKNOWN < board && board < EXP_BOARD_COUNT) + return EXP_BOARD_NAMES[board]; + else + return EXP_BOARD_NAMES[EXP_BOARD_UNKNOWN]; +} + +struct LMS64C_Info +{ + unsigned char firmware; + unsigned char deviceType; + unsigned char protocol; + unsigned char hardware; + unsigned char expansionBoard; +}; + +enum eCMD_LMS +{ + CMD_GET_INFO = 0x00, + CMD_LMS6002_RST = 0x10, + ///Writes data to SI5356 synthesizer via I2C + CMD_SI5356_WR = 0x11, + ///Reads data from SI5356 synthesizer via I2C + CMD_SI5356_RD = 0x12, + ///Writes data to SI5351 synthesizer via I2C + CMD_SI5351_WR = 0x13, + ///Reads data from SI5351 synthesizer via I2C + CMD_SI5351_RD = 0x14, + ///PanelBus DVI (HDMI) Transmitter control + CMD_TFP410_WR = 0x15, + ///PanelBus DVI (HDMI) Transmitter control + CMD_TFP410_RD = 0x16, + ///Sets new LMS7002M chip’s RESET pin level (0, 1, pulse) + CMD_LMS7002_RST = 0x20, + ///Writes data to LMS7002M chip via SPI + CMD_LMS7002_WR = 0x21, + ///Reads data from LMS7002M chip via SPI + CMD_LMS7002_RD = 0x22, + ///Writes data to LMS6002 chip via SPI + CMD_LMS6002_WR = 0x23, + ///Reads data from LMS6002 chip via SPI + CMD_LMS6002_RD = 0x24, + + CMD_LMS_LNA = 0x2A, + CMD_LMS_PA = 0x2B, + + CMD_PROG_MCU = 0x2C, + ///Writes data to ADF4002 chip via SPI + CMD_ADF4002_WR = 0x31, + + CMD_USB_FIFO_RST = 0x40, + CMD_PE636040_WR = 0x41, + CMD_PE636040_RD = 0x42, + + CMD_GPIO_WR = 0x51, + CMD_GPIO_RD = 0x52, + + CMD_ALTERA_FPGA_GW_WR = 0x53, + CMD_ALTERA_FPGA_GW_RD = 0x54, + + CMD_BRDSPI_WR = 0x55,//16 bit spi for stream, dataspark control + CMD_BRDSPI_RD = 0x56,//16 bit spi for stream, dataspark control + CMD_BRDSPI8_WR = 0x57, //8 + 8 bit spi for stream, dataspark control + CMD_BRDSPI8_RD = 0x58, //8 + 8 bit spi for stream, dataspark control + + CMD_BRDCONF_WR = 0x5D, //write config data to board + CMD_BRDCONF_RD = 0x5E, //read config data from board + + CMD_ANALOG_VAL_WR = 0x61, //write analog value + CMD_ANALOG_VAL_RD = 0x62, //read analog value + + CMD_MYRIAD_RST = 0x80, + CMD_MYRIAD_WR = 0x81, + CMD_MYRIAD_RD = 0x82, + CMD_MYRIAD_PROG = 0x8C +}; + +enum eCMD_STATUS +{ + STATUS_UNDEFINED, + STATUS_COMPLETED_CMD, + STATUS_UNKNOWN_CMD, + STATUS_BUSY_CMD, + STATUS_MANY_BLOCKS_CMD, + STATUS_ERROR_CMD, + STATUS_WRONG_ORDER_CMD, + STATUS_RESOURCE_DENIED_CMD, + STATUS_COUNT +}; + +static const char status_text[][32]= +{ + "Undefined/Failure", + "Completed", + "Unknown command", + "Busy", + "Too many blocks", + "Error", + "Wrong order", + "Resource denied" +}; + +static const char* status2string(const int status) +{ + if(status >= 0 && status < STATUS_COUNT) + return status_text[status]; + else + return "Unknown status"; +} + +enum eADC_UNITS +{ + RAW, + VOLTAGE, + CURRENT, + RESISTANCE, + POWER, + ADC_UNITS_COUNT +}; + +static const char adc_units_text[][8] = {"", "V", "A", "Ohm", "W"}; + +static const char* adcUnits2string(const unsigned units) +{ + if (units < ADC_UNITS_COUNT) + return adc_units_text[units]; + else + return " unknown"; +} diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/CMakeLists.txt b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/CMakeLists.txt new file mode 100644 index 0000000000..d9124aaef1 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/CMakeLists.txt @@ -0,0 +1,34 @@ +set(ENABLE_USB_CONNECTION "YES" CACHE BOOL INTERNAL) +set(ENABLE_SPI_CONNECTION "NO" CACHE BOOL INTERNAL) +set(CONNECTION_MANAGER_DIR connectionManager) +set(connectionManager_src_files + ConnectionManager.cpp + ConnectionCOM.cpp + ConnectionManager.h + ConnectionCOM.h + lmsComms.h + lmsComms.cpp +) +if(ENABLE_USB_CONNECTION) + list(APPEND connectionManager_src_files ConnectionUSB.cpp ConnectionUSB.h) + add_definitions(-DENABLE_USB_CONNECTION) +endif() +if(ENABLE_SPI_CONNECTION) + list(APPEND connectionManager_src_files ConnectionSPI.cpp ConnectionSPI.h) + add_definitions(-DENABLE_SPI_CONNECTION) +endif() + +add_library(ConnectionManager STATIC ${connectionManager_src_files}) +target_include_directories(ConnectionManager PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}) + +if(WIN32 AND ENABLE_USB_CONNECTION) + find_package(CyAPI REQUIRED) + LINK_DIRECTORIES(${CYAPI_LIBRARIES}) + include_directories(${CYAPI_INCLUDE_DIRS}) + set(CONNECTION_MANAGER_LIBS ${CYAPI_LIBRARIES} SetupAPI) + target_link_libraries(ConnectionManager ${CONNECTION_MANAGER_LIBS}) +endif() +if(UNIX AND ENABLE_USB_CONNECTION) + set(CONNECTION_MANAGER_LIBS usb-1.0 -lpthread) + target_link_libraries(ConnectionManager ${CONNECTION_MANAGER_LIBS}) +endif() diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/ConnectionCOM.cpp b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/ConnectionCOM.cpp new file mode 100644 index 0000000000..6c7fc0d829 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/ConnectionCOM.cpp @@ -0,0 +1,596 @@ +/** + @file ConnectionCOM.cpp + @author Lime Microsystems (www.limemicro.com) + @brief Implementation of communications through COM port +*/ + +#include "ConnectionCOM.h" + +#include "string.h" +#ifdef __unix__ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#endif // LINUX + +const int COM_RETRY_INTERVAL = 20; //ms +const int COM_TOTAL_TIMEOUT = 300; //ms + +/** @brief Initializes com port connection +*/ +ConnectionCOM::ConnectionCOM() +{ + currentDeviceIndex = -1; + connected = false; + comPortList.clear(); + m_deviceNames.clear(); + m_connectionType = COM_PORT; +#ifndef __unix__ + hComm = INVALID_HANDLE_VALUE; +#else + hComm = -1; +#endif + comBaudrate = 9600; +} + +/** @brief When object is destroyed it closes it's opened COM port +*/ +ConnectionCOM::~ConnectionCOM() +{ + Close(); +} + +/** @brief Opens connection to first found chip + @return 0-success +*/ +IConnection::DeviceStatus ConnectionCOM::Open() +{ + comPortList.clear(); + if(comPortList.size() == 0) + FindAllComPorts(); + + m_deviceNames.clear(); + if(m_deviceNames.size() == 0) + RefreshDeviceList(); + + for(unsigned int i=0; i 0 ) + { + comPortName = m_deviceNames[toOpen]; + IConnection::DeviceStatus status = Open(comPortName.c_str(), comBaudrate); + if( status == SUCCESS ) + currentDeviceIndex = toOpen; + return status; + } + return FAILURE; +} + +/** @brief Closes connection to chip +*/ +void ConnectionCOM::Close() +{ + connected = false; + currentDeviceIndex = -1; +#ifndef __unix__ + if (hComm != INVALID_HANDLE_VALUE) + { + SetCommTimeouts(hComm, &m_ctmoOld); + CloseHandle(hComm); + } + hComm = INVALID_HANDLE_VALUE; +#else + if( hComm >= 0) + { + close(hComm); + } + hComm = -1; +#endif +} + +/** @brief Returns whether chip is connected + @return chip is connected +*/ +bool ConnectionCOM::IsOpen() +{ +#ifndef __unix__ + if (hComm != INVALID_HANDLE_VALUE && TestConnectivity() ) + return true; +#else + if( hComm != -1 && TestConnectivity() ) + return true; +#endif + return false; +} + +int ConnectionCOM::GetOpenedIndex() +{ + return currentDeviceIndex; +} + +/** @brief Sends data through COM port + @param buffer data buffer to send + @param length size of data buffer + @param timeout_ms timeout limit for operation in milliseconds + @return Number of bytes sent +*/ +int ConnectionCOM::Write(const unsigned char *buffer, int length, int timeout_ms) +{ + if(timeout_ms == 0) + { + timeout_ms = COM_TOTAL_TIMEOUT; + } + int retryCount = 0; + const int maxRetries = (timeout_ms/COM_RETRY_INTERVAL) > 1 ? (timeout_ms/COM_RETRY_INTERVAL) : 1; + bool status = false; +#ifndef __unix__ + unsigned long bytesWriten = 0; + m_osWOverlap.InternalHigh = 0; + + for(int i = 0; iwrite("COM PORT: error writing data\n", LOG_ERROR); +// if(bytesWriten == 0) +// MessageLog::getInstance()->write("COM PORT: data bytes sent 0\n", LOG_WARNING); + status = false; + } + else + status = true; + ++retryCount; + } +#endif + if(bytesWriten == length) + status = true; + + return bytesWriten; +} + +/** @brief Reads data from COM port + @param buffer pointer to data buffer for receiving + @param length number of bytes to read + @param timeout_ms timeout limit for operation in milliseconds + @return Number of bytes received +*/ +int ConnectionCOM::Read(unsigned char *buffer, int length, int timeout_ms) +{ + if(timeout_ms == 0) + { + timeout_ms = COM_TOTAL_TIMEOUT; + } + int retryCount = 0; + const int maxRetries = (timeout_ms/COM_RETRY_INTERVAL) > 1 ? (timeout_ms/COM_RETRY_INTERVAL) : 1; + bool status = false; + + memset(buffer, 0, length); + long bytesReaded = 0; + unsigned long totalBytesReaded = 0; + char cRawData[COM_BUFFER_LENGTH]; + unsigned long bytesToRead = length; + + memset(cRawData, '\0', sizeof(cRawData[0])*COM_BUFFER_LENGTH); + + for(int i=0; iwrite("COM PORT: error reading data\n", LOG_ERROR); +// if(bytesReaded == 0) +// MessageLog::getInstance()->write("COM PORT: reading 0 bytes\n", LOG_WARNING); + status = false; + } +#endif + retryCount++; + + for(int j=0; jwrite(ss.str(), LOG_DATA); + +// if(retryCount == maxRetries) +// MessageLog::getInstance()->write("COM PORT: read data timeout\n", LOG_WARNING); +// +// if(totalBytesReaded > length) +// MessageLog::getInstance()->write("COM PORT: read data corrupted, received length > requested length\n", LOG_ERROR); + return totalBytesReaded; +} + +/** @brief Searches for available COM ports and adds them to list +*/ +void ConnectionCOM::FindAllComPorts() +{ + Close(); + comPortList.clear(); +#ifndef __unix__ + HKEY hSERIALCOMM; + if (RegOpenKeyEx(HKEY_LOCAL_MACHINE, TEXT("HARDWARE\\DEVICEMAP\\SERIALCOMM"), 0, KEY_QUERY_VALUE, &hSERIALCOMM) == ERROR_SUCCESS) + { + // Get the max value name and max value lengths + DWORD dwMaxValueNameLen; + DWORD dwMaxValueLen; + DWORD dwQueryInfo = RegQueryInfoKey(hSERIALCOMM, NULL, NULL, NULL, NULL, NULL, NULL, NULL, &dwMaxValueNameLen, &dwMaxValueLen, NULL, NULL); + if (dwQueryInfo == ERROR_SUCCESS) + { + DWORD dwMaxValueNameSizeInChars = dwMaxValueNameLen + 1; + // Include space for the NULL terminator + DWORD dwMaxValueNameSizeInBytes = dwMaxValueNameSizeInChars*sizeof(TCHAR); + DWORD dwMaxValueDataSizeInChars = dwMaxValueLen / sizeof(TCHAR) + 1; + // Include space for the NULL terminator + DWORD dwMaxValueDataSizeInBytes = dwMaxValueDataSizeInChars*sizeof(TCHAR); + + // Allocate some space for the value name and value data + TCHAR* szValueName = new TCHAR[dwMaxValueNameSizeInChars]; + TCHAR* byValue = new TCHAR[dwMaxValueDataSizeInBytes]; + if (szValueName && byValue) + { + // Enumerate all the values underneath HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\SERIALCOMM + DWORD dwIndex = 0; + DWORD dwType; + DWORD dwValueNameSize = dwMaxValueNameSizeInChars; + DWORD dwDataSize = dwMaxValueDataSizeInBytes; + memset(szValueName, 0, dwMaxValueNameSizeInBytes); + memset(byValue, 0, dwMaxValueDataSizeInBytes); + LONG nEnum = RegEnumValue(hSERIALCOMM, dwIndex, szValueName, &dwValueNameSize, NULL, &dwType, (LPBYTE)byValue, &dwDataSize); + while (nEnum == ERROR_SUCCESS) + { + // If the value is of the correct type, then add it to the array + if (dwType == REG_SZ) + { + char portname[512]; + TCHAR* szPort = byValue; + int nUserNameLenUnicode = lstrlen( szPort ); // Convert all UNICODE characters + int nUserNameLen = WideCharToMultiByte( CP_ACP, // ANSI Code Page + 0, // No special handling of unmapped chars + (LPCWSTR)szPort, // wide-character string to be converted + nUserNameLenUnicode, + NULL, 0, // No output buffer since we are calculating length + NULL, NULL ); // Unrepresented char replacement - Use Default + TCHAR* pszUserName = new TCHAR[ nUserNameLen ]; // nUserNameLen includes the NULL character + WideCharToMultiByte( CP_ACP, // ANSI Code Page + 0, // No special handling of unmapped chars + (LPCWSTR)szPort, // wide-character string to be converted + nUserNameLenUnicode, + portname, + nUserNameLen, + NULL, NULL ); // Unrepresented char replacement - Use Default + portname[nUserNameLen] = 0; +#ifdef UNICODE + comPortList.push_back(portname); +#else + comPortList.push_back(szPort); +#endif + } + // Prepare for the next time around + dwValueNameSize = dwMaxValueNameSizeInChars; + dwDataSize = dwMaxValueDataSizeInBytes; + memset(szValueName, 0, dwMaxValueNameSizeInBytes); + memset(byValue, 0, dwMaxValueDataSizeInBytes); + ++dwIndex; + nEnum = RegEnumValue(hSERIALCOMM, dwIndex, szValueName, &dwValueNameSize, NULL, &dwType, (LPBYTE)byValue, &dwDataSize); + } + } + delete szValueName; + delete byValue; + } + // Close the registry key now that we are finished with it + RegCloseKey(hSERIALCOMM); + + if (dwQueryInfo != ERROR_SUCCESS) + SetLastError(dwQueryInfo); + } +#else + char tempBuffer[256]; + string result = ""; +#warning Currently searching only for ACM connections + system( "ls /dev | grep ttyACM > /tmp/foundSerialPorts.txt"); + + fstream fin; + fin.open("/tmp/foundSerialPorts.txt", ios::in); + while(!fin.eof()) + { + fin.getline(tempBuffer, 256); + result = "/dev/"; + result.append(tempBuffer); + if( strlen(tempBuffer) > 3 ) //longer than tty + comPortList.push_back(result); + } + fin.close(); +#endif +} + +/** @brief Opens COM port + @param comName COM port name + @param baudrate COM port baudrate + @return 0 on success +*/ +IConnection::DeviceStatus ConnectionCOM::Open(const char *comName, int baudrate) +{ + Close(); + if (strlen(comName) == 0) + return FAILURE; + + DeviceStatus errorCode = SUCCESS; + +#ifndef __unix__ + // Initialize Overlap structures + m_osROverlap.Internal = 0; + m_osROverlap.InternalHigh = 0; + m_osROverlap.Offset = 0; + m_osROverlap.OffsetHigh = 0; + m_osROverlap.hEvent = CreateEvent(NULL, false, false, NULL); + + m_osWOverlap.Internal = 0; + m_osWOverlap.InternalHigh = 0; + m_osWOverlap.Offset = 0; + m_osWOverlap.OffsetHigh = 0; + m_osWOverlap.hEvent = CreateEvent(NULL, false, false, NULL); + + // Initialize DSB structure + memset(&m_dcbCommPort, 0, sizeof(m_dcbCommPort)); + + m_dcbCommPort.BaudRate = comBaudrate; + m_dcbCommPort.fBinary = 1; + m_dcbCommPort.fParity = 0; + m_dcbCommPort.fOutxCtsFlow = 0; + m_dcbCommPort.fOutxDsrFlow = 0; + m_dcbCommPort.fDtrControl = 0; + m_dcbCommPort.fDsrSensitivity = 0; + m_dcbCommPort.fTXContinueOnXoff = 0; + m_dcbCommPort.fOutX = 0; + m_dcbCommPort.fInX = 0; + m_dcbCommPort.fErrorChar = 0; + m_dcbCommPort.fNull = 0; + m_dcbCommPort.fRtsControl = 0; + m_dcbCommPort.fAbortOnError = 0; + m_dcbCommPort.fDummy2 = 0; + // m_dcbCommPort.wReserved = 0; + m_dcbCommPort.XonLim = 512; + m_dcbCommPort.XoffLim = 512; + m_dcbCommPort.ByteSize = 8; + m_dcbCommPort.Parity = 0; + m_dcbCommPort.StopBits = 0; + //m_dcbCommPort.StopBits = 1; + m_dcbCommPort.XonChar = 17; + m_dcbCommPort.XoffChar = 19; + m_dcbCommPort.ErrorChar = 0; + m_dcbCommPort.EofChar = 26; + m_dcbCommPort.EvtChar = 0; + m_dcbCommPort.wReserved1 = 0; + m_dcbCommPort.DCBlength = sizeof(DCB); + + // Initialize Timeout's + m_ctmoNew.ReadIntervalTimeout = 50; + m_ctmoNew.ReadTotalTimeoutMultiplier = 0; + m_ctmoNew.ReadTotalTimeoutConstant = 100; // 1; + m_ctmoNew.WriteTotalTimeoutMultiplier = 0; + m_ctmoNew.WriteTotalTimeoutConstant = 100; + + // Open COM port + string stmp; + stmp = "\\\\.\\"; + stmp.append(comName); + hComm = CreateFileA(stmp.c_str(), GENERIC_READ | GENERIC_WRITE, 0, 0, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, 0); + + if (hComm != INVALID_HANDLE_VALUE) + { + // Set Events + if (!SetCommMask(hComm, 0)) + errorCode = FAILURE; + + // Set Timeouts + GetCommTimeouts(hComm, &m_ctmoOld); + if (!SetCommTimeouts(hComm, &m_ctmoNew)) + errorCode = FAILURE; + + // Set DCB + if (!SetCommState(hComm, &m_dcbCommPort)) + errorCode = FAILURE; + } + else + { + errorCode = FAILURE; + }; + + // Check the results + if (errorCode != 0) + { + //unsigned long err = GetLastError(); + CloseHandle(hComm); + hComm = INVALID_HANDLE_VALUE; + return errorCode; + } + else + { + PurgeComm(hComm, PURGE_TXCLEAR | PURGE_RXCLEAR); + return SUCCESS; + } +#else + hComm = open(comName, O_RDWR | O_NOCTTY | O_SYNC); + if(hComm < 0) + { +// printf("%s",strerror(errno)); +// MessageLog::getInstance()->write("Connection manager: failed opening COM port\n", LOG_ERROR); + return FAILURE; + } + + struct termios tty; + memset(&tty, 0, sizeof(tty)); + if( tcgetattr(hComm, &tty) != 0) + { +// MessageLog::getInstance()->write("Connection Manager: error from tcgetattr\n", LOG_ERROR); + return FAILURE; + } + int speed = B9600; + cfsetospeed(&tty, speed); + cfsetispeed(&tty, speed); + + tty.c_cflag = (tty.c_cflag & ~CSIZE) | CS8; + tty.c_iflag &= ~IGNBRK; + tty.c_lflag = 0; + tty.c_oflag = 0; + tty.c_cc[VMIN] = 0; // read non blocking + tty.c_cc[VTIME] = 5; // 0.5 seconds read timeout + + tty.c_iflag &= ~(IXON | IXOFF | IXANY); + tty.c_cflag |= (CLOCAL | CREAD); + + if(tcsetattr(hComm, TCSANOW, &tty) != 0) + { +// MessageLog::getInstance()->write("Connection manager: error from tcsetattr\n", LOG_ERROR); + return FAILURE; + } +#endif + return SUCCESS; +} + +/** @brief Checks if chip is connected to currently open port + @return chip is connected +*/ +bool ConnectionCOM::TestConnectivity() +{ +//currently set to always return true to show all com ports + return true; +#ifndef __unix__ + if (hComm != INVALID_HANDLE_VALUE) +#else + if( hComm >= 0) +#endif + { +// unsigned char out[64]; +// unsigned char in[64]; +// memset(in, 0, 64); +// out[0] = CMD_GET_INFO; +// SendData(out, 64); +// ReadData(in, 64); +// if(in[0] == CMD_GET_INFO && in[1] == 0x01) +// return true; +// else +// return false; + } + return false; +} + +/** @brief Finds all chips connected to com ports + @return number of devices found +*/ +int ConnectionCOM::RefreshDeviceList() +{ + int wasOpen = -1; + string wasOpenName = ""; + if(IsOpen()) + { + wasOpen = GetOpenedIndex(); + wasOpenName = comPortName; + } + Close(); + comPortList.clear(); + if(comPortList.size() == 0) + FindAllComPorts(); + + m_deviceNames.clear(); + string comName; + for(unsigned int i=0; i ConnectionCOM::GetDeviceNames() +{ + return m_deviceNames; +} + +/** @brief Purges communication buffers +*/ +void ConnectionCOM::ClearComm() +{ +#ifndef __unix__ + PurgeComm(hComm, PURGE_TXCLEAR|PURGE_RXCLEAR); +#endif +} diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/ConnectionCOM.h b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/ConnectionCOM.h new file mode 100644 index 0000000000..0549472db1 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/ConnectionCOM.h @@ -0,0 +1,62 @@ +/** +@file ConnectionCOM.h +@author Lime Microsystems (www.limemicro.com) +@brief Class for data communications through COM port +*/ + +#ifndef CONNECTION_COM_PORT_H +#define CONNECTION_COM_PORT_H + +#ifndef __unix__ + #include "windows.h" +#endif + +#include "IConnection.h" + +class ConnectionCOM : public IConnection +{ +public: + static const int COM_BUFFER_LENGTH = 1024; //max buffer size for data + + ConnectionCOM(); + ~ConnectionCOM(); + + DeviceStatus Open(); + DeviceStatus Open(unsigned i); + void Close(); + bool IsOpen(); + int GetOpenedIndex(); + + int Write(const unsigned char *buffer, int length, int timeout_ms = 0); + int Read(unsigned char *buffer, int length, int timeout_ms = 0); + + std::vector GetDeviceNames(); + int RefreshDeviceList(); + void ClearComm(); +private: + void FindAllComPorts(); + DeviceStatus Open(const char *comName, int baudrate); + + bool TestConnectivity(); + + std::string comPortName; + int comBaudrate; + bool connected; + + int currentDeviceIndex; + std::vector comPortList; + std::vector m_deviceNames; + +#ifndef __unix__ + HANDLE hComm; + COMMTIMEOUTS m_ctmoNew; + COMMTIMEOUTS m_ctmoOld; + OVERLAPPED m_osROverlap; + OVERLAPPED m_osWOverlap; + DCB m_dcbCommPort; +#else + int hComm; //com port file descriptor +#endif + +}; +#endif diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/ConnectionManager.cpp b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/ConnectionManager.cpp new file mode 100644 index 0000000000..9ec16e0d88 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/ConnectionManager.cpp @@ -0,0 +1,319 @@ +/** + @file ConnectionManager.cpp + @author Lime Microsystems (www.limemicro.com) + @brief Implementation of various connection types to devices +*/ + +#include "ConnectionManager.h" +#include "ConnectionCOM.h" + +#ifdef ENABLE_USB_CONNECTION + #include "ConnectionUSB.h" +#endif +#ifdef ENABLE_SPI_CONNECTION + #include "ConnectionSPI.h" +#endif + +#include +#include +#include + +/** @brief Creates connection interfaces +*/ +ConnectionManager::ConnectionManager(const IConnection::eConnectionType port_type) : activeControlPort(NULL) +{ + mLogData = false; + mOpenedDevice = -1; + if (port_type == IConnection::COM_PORT) + m_connections[IConnection::COM_PORT] = new ConnectionCOM(); +#ifdef ENABLE_USB_CONNECTION + if (port_type == IConnection::USB_PORT) + m_connections[IConnection::USB_PORT] = new ConnectionUSB(); +#endif +#ifdef ENABLE_SPI_CONNECTION + m_connections[IConnection::SPI_PORT] = new ConnectionSPI(); +#endif +} + +/** @brief Destroys connection interfaces +*/ +ConnectionManager::~ConnectionManager() +{ + for (auto iter = m_connections.begin(); iter != m_connections.end(); ++iter) + { + delete iter->second; + } +} + +/** @brief Checks if connection to device is opened + @return True if device is connected +*/ +bool ConnectionManager::IsOpen() +{ + return activeControlPort ? activeControlPort->IsOpen() : false; +} + +/** @brief Opens connection to first available device + @return True if connected to device +*/ +bool ConnectionManager::Open() +{ + return Open(0); +} + +/** @brief Connects to selected device + @param i device index from device list + @return 1:Success, 0:failure +*/ +int ConnectionManager::Open(unsigned i) +{ + if(i >= mDevices.size()) + return 0; + + if(activeControlPort) + activeControlPort->Close(); + switch(mDevices[i].port) + { + case IConnection::COM_PORT: + activeControlPort = m_connections[IConnection::COM_PORT]; + break; + case IConnection::USB_PORT: + activeControlPort = m_connections[IConnection::USB_PORT]; + break; + case IConnection::SPI_PORT: + activeControlPort = m_connections[IConnection::SPI_PORT]; + break; + default: + return 0; + } + mOpenedDevice = -1; + if( i < mDevices.size() ) + { + if (activeControlPort->Open(mDevices[i].portIndex) == IConnection::SUCCESS) + { + mOpenedDevice = i; + return 1; + } + } + return 0; +} + +/** @brief Closes connection to device +*/ +void ConnectionManager::Close() +{ + if(activeControlPort) + { + activeControlPort->Close(); + //Notify(LMS_Message(MSG_BOARD_DISCONNECTED, "", 0, 0)); + } + mOpenedDevice = -1; +} + +/** @brief Finds all currently connected devices and forms device list + @return number of devices found +*/ +int ConnectionManager::RefreshDeviceList() +{ + mDeviceList.clear(); + mDevices.clear(); + DeviceInfo dev; + for (auto iter = m_connections.begin(); iter != m_connections.end(); ++iter) + { + vector names; + IConnection *port = iter->second; + if(port->RefreshDeviceList() > 0) + { + names = port->GetDeviceNames(); + for(unsigned i=0; ifirst; + dev.portIndex = i; + mDevices.push_back(dev); + } + } + } + for(unsigned i=0; iWrite(buffer, length, timeout_ms); +#ifndef NDEBUG + if(mLogData) + { + stringstream ss; + ss << "WR(" << (bytesTransferred>=0?bytesTransferred: 0) << "): "; + ss << std::hex << std::setfill('0'); + int repeatedZeros = 0; + for(int i=length-1; i>=0; --i) + if(buffer[i] == 0) + ++repeatedZeros; + else break; + if(repeatedZeros == 1) + repeatedZeros = 0; + repeatedZeros = repeatedZeros - (repeatedZeros & 0x1); + for(int i=0; i 1) + ss << " (00 x " << std::dec << repeatedZeros << " times)"; + cout << ss.str() << endl; +#ifndef __unix__ + OutputDebugString(ss.str().c_str()); +#endif + } +#endif + return bytesTransferred; + } + return -1; +} + +/** @brief Receives data from currently opened connection + @param buffer incomming data buffer, must be big enough for length bytes + @param length bytes to read + @param timeout_ms timeout in milliseconds + @return number of bytes received +*/ +int ConnectionManager::Read(unsigned char *buffer, int length, int timeout_ms) +{ + if(activeControlPort) + { + int bytesTransferred = activeControlPort->Read(buffer, length, timeout_ms); +#ifndef NDEBUG + if(mLogData) + { + stringstream ss; + ss << "RD(" << (bytesTransferred>=0?bytesTransferred: 0) << "): "; + ss << std::hex << std::setfill('0'); + int repeatedZeros = 0; + for(int i=length-1; i>=0; --i) + if(buffer[i] == 0) + ++repeatedZeros; + else break; + if(repeatedZeros == 2) + repeatedZeros = 0; + repeatedZeros = repeatedZeros - (repeatedZeros & 0x1); + for(int i=0; i 2) + ss << " (00 x " << std::dec << repeatedZeros << " times)"; + cout << ss.str() << endl; + } +#endif + return bytesTransferred; + } + return -1; +} + +int ConnectionManager::WriteStream(const char *buffer, int length) +{ + return 0; +} + +int ConnectionManager::ReadStream(char *buffer, int length, unsigned int timeout_ms) +{ + /*int handle = activeControlPort->BeginDataReading(buffer, length); + activeControlPort->WaitForReading(handle, timeout_ms); + long received = length; + activeControlPort->FinishDataReading(buffer, received, handle); + return received; + */ + long len = length; + int status = activeControlPort->ReadDataBlocking(buffer, len, 0); + return len; +} + + +int ConnectionManager::BeginDataReading(char *buffer, long length) +{ + return activeControlPort->BeginDataReading(buffer, length); +} +/** +@brief Blocks until data is received or set number of milliseconds have passed. +@param contextHandle handle returned by BeginDataReading() +@param timeout_ms number of milliseconds to wait +@return 1-data received, 0-data not received +*/ +int ConnectionManager::WaitForReading(int contextHandle, unsigned int timeout_ms) +{ + return activeControlPort->WaitForReading(contextHandle, timeout_ms); +} +/** +@brief Finished asynchronous data reading. +@param buffer where to put received data +@param length number of bytes to read, will be changed to actual number of bytes received +@param contextHandle context handle returned by BeginDataReading() +@return received data length +*/ +int ConnectionManager::FinishDataReading(char *buffer, long &length, int contextHandle) +{ + return activeControlPort->FinishDataReading(buffer, length, contextHandle); +} + +/** +@brief Aborts reading operations +*/ +void ConnectionManager::AbortReading() +{ + activeControlPort->AbortReading(); +} + +/** +@brief Start asynchronous data sending. +@param buffer data buffer to be sent +@param length number of bytes to send. +@return context handle +*/ +int ConnectionManager::BeginDataSending(const char *buffer, long length) +{ + return activeControlPort->BeginDataSending(buffer, length); +} +/** +@brief Blocks until data is sent or set number of miliseconds have passed. +@param contextHandle handle returned by BeginDataReading() +@param timeout_ms number of miliseconds to wait +@return 1-data sent, 0-data not sent +*/ +int ConnectionManager::WaitForSending(int contextHandle, unsigned int timeout_ms) +{ + return activeControlPort->WaitForSending(contextHandle, timeout_ms); +} +/** +@brief Finished asynchronous data sending. +@param buffer where to put received data +@param length number of bytes to send, will be changed to actual number of bytes sent +@param contextHandle context handle returned by BeginDataReading() +@return sent data length +*/ +int ConnectionManager::FinishDataSending(const char *buffer, long &length, int contextHandle) +{ + return activeControlPort->FinishDataSending(buffer, length, contextHandle); +} + +/** +@brief Aborts sending operations +*/ +void ConnectionManager::AbortSending() +{ + activeControlPort->AbortSending(); +} diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/ConnectionManager.h b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/ConnectionManager.h new file mode 100644 index 0000000000..68819011ff --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/ConnectionManager.h @@ -0,0 +1,60 @@ +/** + @file ConnectionManager.h + @author Lime Microsystems (www.limemicro.com) + @brief Class for managing connection to devices +*/ + +#ifndef LMS_CONNECTION_MANAGER_H +#define LMS_CONNECTION_MANAGER_H + +#include "IConnection.h" +#include + +class ConnectionManager +{ +public: + struct DeviceInfo + { + std::string name; + IConnection::eConnectionType port; + int portIndex; + }; + + ConnectionManager(const IConnection::eConnectionType port_type); + ~ConnectionManager(); + bool IsOpen(); + bool Open(); + int Open(unsigned i); + void Close(); + int RefreshDeviceList(); + int GetOpenedIndex(); + std::vector GetDeviceList(){return mDeviceList;}; + + int Write(const unsigned char *buffer, int length, int timeout_ms = 0); + int Read(unsigned char *buffer, int length, int timeout_ms = 0); + + int WriteStream(const char *buffer, int length); + int ReadStream(char *buffer, int length, unsigned int timeout_ms); + + int BeginDataReading(char *buffer, long length); + int WaitForReading(int contextHandle, unsigned int timeout_ms); + int FinishDataReading(char *buffer, long &length, int contextHandle); + void AbortReading(); + + int BeginDataSending(const char *buffer, long length); + int WaitForSending(int contextHandle, unsigned int timeout_ms); + int FinishDataSending(const char *buffer, long &length, int contextHandle); + void AbortSending(); + +protected: + bool mLogData; + /// Port used for communication. + IConnection *activeControlPort; + std::vector mDevices; + std::vector mDeviceList; + int mOpenedDevice; + std::map m_connections; +}; + +#endif // LMS_CONNECTION_MANAGER_H + diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/ConnectionSPI.cpp b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/ConnectionSPI.cpp new file mode 100644 index 0000000000..fb305f9c1c --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/ConnectionSPI.cpp @@ -0,0 +1,313 @@ +/** + @file ConnectionSPI.cpp + @author Lime Microsystems (www.limemicro.com) + @brief Implementation of communications through SPI port +*/ + +#include "ConnectionSPI.h" + +#include "string.h" +#ifdef __unix__ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#endif // LINUX + +#include +#include + +const int ConnectionSPI::cSPI_BUF_SIZE = 128; +const int ConnectionSPI::cSPI_SPEED_HZ = 2000000; + +/** @brief Tries to read EEPROM for Novena board signature + @return true if Novena board +*/ +bool IsNovenaBoard() +{ +#ifdef __unix__ + char data[8]; + int count = 6; + memset(data, 0, 8); + int addr = 0; + struct i2c_rdwr_ioctl_data session; + struct i2c_msg messages[2]; + char set_addr_buf[2]; + memset(set_addr_buf, 0, sizeof(set_addr_buf)); + memset(data, 0, count); + set_addr_buf[0] = addr>>8; + set_addr_buf[1] = addr; + messages[0].addr = 0xac>>1; + messages[0].flags = 0; + messages[0].len = sizeof(set_addr_buf); + messages[0].buf = set_addr_buf; + messages[1].addr = 0xac>>1; + messages[1].flags = I2C_M_RD; + messages[1].len = count; + messages[1].buf = data; + session.msgs = messages; + session.nmsgs = 2; + + bool isNovena = false; + + int fd = open("/dev/i2c-2", O_RDWR); + if(fd > 0) + { + if(ioctl(fd, I2C_RDWR, &session) < 0) + { + perror("Unable to communicate with i2c device"); + isNovena = false; + } + if(strcmp("Novena", data) == 0) + isNovena = true; + } + close(fd); + return isNovena; +#else + return false; +#endif +} + +/** @brief Initializes SPI port and exports needed GPIO +*/ +ConnectionSPI::ConnectionSPI() +{ + fd = -1; + m_connectionType = SPI_PORT; + std::fstream gpio; + //export SEN pin + gpio.open("/sys/class/gpio/export", ios::out); + if(gpio.good()) + { + gpio << 122; + gpio.flush(); + gpio.close(); + gpio.open("/sys/class/gpio/gpio122/direction", ios::out); + gpio << "out"; + gpio.flush(); + gpio.close(); + m_SEN.open("/sys/class/gpio/gpio122/value", ios::out); + m_SEN<< 1; + m_SEN.flush(); + cout << "GPIO122: set to 1" << endl; + } +} + +ConnectionSPI::~ConnectionSPI() +{ + Close(); + m_SEN.close(); +} + +/** @brief Opens connection to first found chip + @return 0-success +*/ +IConnection::DeviceStatus ConnectionSPI::Open() +{ + Close(); +#ifdef __unix__ + fd = open("/dev/spidev2.0", O_RDWR | O_SYNC); + if (fd < 0) + { + //MessageLog::getInstance()->write("SPI PORT: device not found\n", LOG_ERROR); + return IConnection::FAILURE; + } + int mode = SPI_MODE_0; + int ret = ioctl(fd, SPI_IOC_WR_MODE, &mode); + if (ret == -1) + printf("can't set spi mode"); + + ret = ioctl(fd, SPI_IOC_RD_MODE, &mode); + if (ret == -1) + printf("can't get spi mode"); + + /* + * bits per word + */ + int bits = 8; + ret = ioctl(fd, SPI_IOC_WR_BITS_PER_WORD, &bits); + if (ret == -1) + printf("can't set bits per word"); + + ret = ioctl(fd, SPI_IOC_RD_BITS_PER_WORD, &bits); + if (ret == -1) + printf("can't get bits per word"); + + /* + * max speed hz + */ + int speed = cSPI_SPEED_HZ; + ret = ioctl(fd, SPI_IOC_WR_MAX_SPEED_HZ, &speed); + if (ret == -1) + printf("can't set max speed hz"); + + ret = ioctl(fd, SPI_IOC_RD_MAX_SPEED_HZ, &speed); + if (ret == -1) + printf("can't get max speed hz"); + + printf("spi mode: 0x%x\n", mode); + printf("bits per word: %d\n", bits); + printf("max speed: %d Hz (%d KHz)\n", speed, speed/1000); + return IConnection::SUCCESS; +#else + return IConnection::FAILURE; +#endif +} + +/** @brief Opens connection to selected chip + @param index chip index in device list + @return 0-success +*/ +IConnection::DeviceStatus ConnectionSPI::Open(unsigned index) +{ + return Open(); +} + +/** @brief Closes connection to chip +*/ +void ConnectionSPI::Close() +{ +#ifdef __unix__ + close(fd); + fd = -1; +#endif +} + +/** @brief Returns whether chip is connected + @return chip is connected +*/ +bool ConnectionSPI::IsOpen() +{ + return (fd >= 0); +} + +/** @brief Sends data through COM port + @param buffer data buffer to send + @param length size of data buffer + @param timeout_ms timeout limit for operation in milliseconds + @return Number of bytes sent +*/ +int ConnectionSPI::Write(const unsigned char *buffer, int length, int timeout_ms) +{ + #ifdef __unix__ + if(fd < 0) + return 0; + m_SEN << 0; + m_SEN.flush(); + unsigned long bytesWritten = 0; + rxbuf.clear(); + int bytesReceived = 0; + char rxbytes[2]; + while(bytesWritten < length) + { + int toWrite = length-bytesWritten > cSPI_BUF_SIZE ? cSPI_BUF_SIZE : length-bytesWritten; + for(int i=0; i 0) +// { +// ss << " re443ad(" << toWrite << "): "; +// for(int i=0; iwrite(ss.str(), LOG_DATA); + + bytesWritten += toWrite; + } + m_SEN << 1; + m_SEN.flush(); + return bytesWritten; +#else + return 0; +#endif +} + +/** @brief Reads data from COM port + @param buffer pointer to data buffer for receiving + @param length number of bytes to read + @param timeout_ms timeout limit for operation in milliseconds + @return Number of bytes received +*/ +int ConnectionSPI::Read(unsigned char *buffer, int length, int timeout_ms) +{ +#ifdef __unix__ + if(fd < 0) + return 0; + //because transfer is done in full duplex, function returns data from last transfer + int tocpy = length > rxbuf.size() ? rxbuf.size() : length; + memcpy(buffer, &rxbuf[0], tocpy); + rxbuf.clear(); + return tocpy; +#else + return 0; +#endif +} + +/** @brief Finds all chips connected to com ports + @return number of devices found +*/ +int ConnectionSPI::RefreshDeviceList() +{ + m_deviceNames.clear(); +#ifdef __unix__ + int spidev = open("/dev/spidev2.0", O_RDWR); + if (spidev >= 0) + { + if(IsNovenaBoard() == true) + m_deviceNames.push_back("SPI (Novena)"); + else + m_deviceNames.push_back("SPI"); + } + close(spidev); +#endif + return m_deviceNames.size(); +} + +/** @brief Returns found devices names + @return vector of device names +*/ +vector ConnectionSPI::GetDeviceNames() +{ + return m_deviceNames; +} + +int ConnectionSPI::GetOpenedIndex() +{ + return 0; +} diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/ConnectionSPI.h b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/ConnectionSPI.h new file mode 100644 index 0000000000..79d9bd9b9b --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/ConnectionSPI.h @@ -0,0 +1,41 @@ +/** +@file ConnectionSPI.h +@author Lime Microsystems (www.limemicro.com) +@brief Class for data communications through SPI port +*/ + +#ifndef CONNECTION_SPI_PORT_H +#define CONNECTION_SPI_PORT_H + +#include "IConnection.h" +#include +#include +#include + +class ConnectionSPI : public IConnection +{ +public: + static const int cSPI_BUF_SIZE; + static const int cSPI_SPEED_HZ; + + ConnectionSPI(); + ~ConnectionSPI(); + + DeviceStatus Open(); + DeviceStatus Open(unsigned i); + void Close(); + bool IsOpen(); + int GetOpenedIndex(); + + int Write(const unsigned char *buffer, int length, int timeout_ms = 0); + int Read(unsigned char *buffer, int length, int timeout_ms = 0); + + std::vector GetDeviceNames(); + int RefreshDeviceList(); +protected: + std::vector m_deviceNames; + std::vector rxbuf; + int fd; + std::fstream m_SEN; +}; +#endif diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/ConnectionUSB.cpp b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/ConnectionUSB.cpp new file mode 100644 index 0000000000..148b7b776b --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/ConnectionUSB.cpp @@ -0,0 +1,771 @@ +/** +@file ConnectionUSB.cpp +@author Lime Microsystems (www.limemicro.com) +@brief Data writing and reading through USB port +*/ + +#include "ConnectionUSB.h" +#include + +#ifdef __unix__ + #include + #include +#endif + +#define USB_TIMEOUT 1000 + +#define HW_LDIGIRED L"DigiRed" +#define HW_LDIGIGREEN L"DigiGreen" +#define HW_LSTREAMER L"Stream" + +#define HW_DIGIRED "DigiRed" +#define HW_DIGIGREEN "DigiGreen" +#define HW_STREAMER "Stream" + +#define CTR_W_REQCODE 0xC1 +#define CTR_W_VALUE 0x0000 +#define CTR_W_INDEX 0x0000 + +#define CTR_R_REQCODE 0xC0 +#define CTR_R_VALUE 0x0000 +#define CTR_R_INDEX 0x0000 + +/** @brief Initializes port type and object necessary to communicate to usb device. +*/ +ConnectionUSB::ConnectionUSB() +{ + m_hardwareName = ""; + isConnected = false; + m_connectionType = USB_PORT; +#ifndef __unix__ + USBDevicePrimary = new CCyUSBDevice(NULL); + OutCtrEndPt = NULL; + InCtrEndPt = NULL; + InCtrlEndPt3 = NULL; + OutCtrlEndPt3 = NULL; +#else + dev_handle = 0; + devs = 0; + int r = libusb_init(&ctx); //initialize the library for the session we just declared + if(r < 0) + printf("Init Error %i\n", r); //there was an error + libusb_set_debug(ctx, 3); //set verbosity level to 3, as suggested in the documentation +#endif + currentDeviceIndex = -1; +} + +/** @brief Closes connection to chip and deallocates used memory. +*/ +ConnectionUSB::~ConnectionUSB() +{ + Close(); +#ifndef __unix__ + delete USBDevicePrimary; +#else + libusb_exit(ctx); +#endif +} + +/** @brief Automatically open first available chip connected to usb port. + @return 0-success, other-failure +*/ +IConnection::DeviceStatus ConnectionUSB::Open() +{ + currentDeviceIndex = -1; + if(m_deviceNames.size() == 0) + RefreshDeviceList(); + +#ifndef __unix__ + for(int i=0; iDeviceCount(); ++i) + if( Open(i) == SUCCESS) + { + currentDeviceIndex = i; + return SUCCESS; + } +#else + if(Open(0) == SUCCESS) + return SUCCESS; +#endif + return FAILURE; +} + +/** @brief Tries to open connected USB device and find communication endpoints. + @return Returns 1-Success, 0-EndPoints not found or device didn't connect. +*/ +IConnection::DeviceStatus ConnectionUSB::Open(unsigned index) +{ +#ifndef __unix__ + wstring m_hardwareDesc = L""; + if( index < USBDevicePrimary->DeviceCount()) + { + if(USBDevicePrimary->Open(index)) + { + m_hardwareDesc = USBDevicePrimary->Product; + unsigned int pos; + //determine connected board type + pos = m_hardwareDesc.find(HW_LDIGIRED, 0); + if( pos != wstring::npos ) + m_hardwareName = HW_DIGIRED; + else if (m_hardwareDesc.find(HW_LSTREAMER, 0) != wstring::npos) + m_hardwareName = HW_STREAMER; + else + m_hardwareName = HW_STREAMER; + + + if (InCtrlEndPt3) + { + delete InCtrlEndPt3; + InCtrlEndPt3 = NULL; + } + InCtrlEndPt3 = new CCyControlEndPoint(*USBDevicePrimary->ControlEndPt); + + if (OutCtrlEndPt3) + { + delete OutCtrlEndPt3; + OutCtrlEndPt3 = NULL; + } + OutCtrlEndPt3 = new CCyControlEndPoint(*USBDevicePrimary->ControlEndPt); + + InCtrlEndPt3->ReqCode = CTR_R_REQCODE; + InCtrlEndPt3->Value = CTR_R_VALUE; + InCtrlEndPt3->Index = CTR_R_INDEX; + + OutCtrlEndPt3->ReqCode = CTR_W_REQCODE; + OutCtrlEndPt3->Value = CTR_W_VALUE; + OutCtrlEndPt3->Index = CTR_W_INDEX; + + for (int i=0; iEndPointCount(); i++) + if(USBDevicePrimary->EndPoints[i]->Address == 0x01) + { + OutEndPt = USBDevicePrimary->EndPoints[i]; + long len = OutEndPt->MaxPktSize * 64; + OutEndPt->SetXferSize(len); + break; + } + for (int i=0; iEndPointCount(); i++) + if(USBDevicePrimary->EndPoints[i]->Address == 0x81) + { + InEndPt = USBDevicePrimary->EndPoints[i]; + long len = InEndPt->MaxPktSize * 64; + InEndPt->SetXferSize(len); + break; + } + isConnected = true; + return SUCCESS; + } //successfully opened device + } //if has devices + return FAILURE; +#else + if(index >= 0 && index < m_dev_pid_vid.size()) + { + dev_handle = libusb_open_device_with_vid_pid(ctx, m_dev_pid_vid[index].second, m_dev_pid_vid[index].first); + + if(dev_handle == 0) + return FAILURE; + if(libusb_kernel_driver_active(dev_handle, 0) == 1) //find out if kernel driver is attached + { + printf("Kernel Driver Active\n"); + if(libusb_detach_kernel_driver(dev_handle, 0) == 0) //detach it + printf("Kernel Driver Detached!\n"); + } + int r = libusb_claim_interface(dev_handle, 0); //claim interface 0 (the first) of device + if(r < 0) + { + printf("Cannot Claim Interface\n"); + return CANNOT_CLAIM_INTERFACE; + } + printf("Claimed Interface\n"); + isConnected = true; + return SUCCESS; + } + else + { + return FAILURE; + } +#endif +} + +/** @brief Closes communication to device. +*/ +void ConnectionUSB::Close() +{ + #ifndef __unix__ + USBDevicePrimary->Close(); + InEndPt = NULL; + OutEndPt = NULL; + if (InCtrlEndPt3) + { + delete InCtrlEndPt3; + InCtrlEndPt3 = NULL; + } + if (OutCtrlEndPt3) + { + delete OutCtrlEndPt3; + OutCtrlEndPt3 = NULL; + } + #else + if(dev_handle != 0) + { + libusb_release_interface(dev_handle, 0); + libusb_close(dev_handle); + dev_handle = 0; + } + #endif + isConnected = false; +} + +/** @brief Returns connection status + @return 1-connection open, 0-connection closed. +*/ +bool ConnectionUSB::IsOpen() +{ + #ifndef __unix__ + return USBDevicePrimary->IsOpen() && isConnected; + #else + return isConnected; + #endif +} + +/** @brief Sends given data buffer to chip through USB port. + @param buffer data buffer, must not be longer than 64 bytes. + @param length given buffer size. + @param timeout_ms timeout limit for operation in milliseconds + @return number of bytes sent. +*/ +int ConnectionUSB::Write(const unsigned char *buffer, const int length, int timeout_ms) +{ + long len = length; + if(IsOpen()) + { + unsigned char* wbuffer = new unsigned char[length]; + memcpy(wbuffer, buffer, length); + if(m_hardwareName == HW_DIGIRED || m_hardwareName == HW_STREAMER) + { + #ifndef __unix__ + if(OutCtrlEndPt3) + OutCtrlEndPt3->Write(wbuffer, len); + else + len = 0; + #else + len = libusb_control_transfer(dev_handle, LIBUSB_REQUEST_TYPE_VENDOR,CTR_W_REQCODE ,CTR_W_VALUE, CTR_W_INDEX, wbuffer, length, USB_TIMEOUT); + #endif + } + else + { + #ifndef __unix__ + if(OutCtrEndPt) + OutCtrEndPt->XferData(wbuffer, len); + else + len = 0; + #else + int actual = 0; + libusb_bulk_transfer(dev_handle, 0x01, wbuffer, len, &actual, USB_TIMEOUT); + len = actual; + #endif + } + delete wbuffer; + } + else + return 0; + return len; +} + +/** @brief Reads data coming from the chip through USB port. + @param buffer pointer to array where received data will be copied, array must be + big enough to fit received data. + @param length number of bytes to read from chip. + @param timeout_ms timeout limit for operation in milliseconds + @return number of bytes received. +*/ +int ConnectionUSB::Read(unsigned char *buffer, const int length, int timeout_ms) +{ + long len = length; + if(IsOpen()) + { + if(m_hardwareName == HW_DIGIRED || m_hardwareName == HW_STREAMER) + { + #ifndef __unix__ + if(InCtrlEndPt3) + InCtrlEndPt3->Read(buffer, len); + else + len = 0; + #else + len = libusb_control_transfer(dev_handle, LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_ENDPOINT_IN ,CTR_R_REQCODE ,CTR_R_VALUE, CTR_R_INDEX, buffer, len, USB_TIMEOUT); + #endif + } + else + { + #ifndef __unix__ + if(InCtrEndPt) + InCtrEndPt->XferData(buffer, len); + else + len = 0; + #else + int actual = 0; + libusb_bulk_transfer(dev_handle, 0x81, buffer, len, &actual, USB_TIMEOUT); + len = actual; + #endif + } + } + return len; +} + +#ifdef __unix__ +/** @brief Function for handling libusb callbacks +*/ +void callback_libusbtransfer(libusb_transfer *trans) +{ + USBTransferContext *context = reinterpret_cast(trans->user_data); + switch(trans->status) + { + case LIBUSB_TRANSFER_CANCELLED: + printf("Transfer canceled\n" ); + context->bytesXfered = trans->actual_length; + context->done = true; + context->used = false; + context->reset(); + break; + case LIBUSB_TRANSFER_COMPLETED: + if(trans->actual_length == context->bytesExpected) + { + context->bytesXfered = trans->actual_length; + context->done = true; + } + //printf("Transfer complete %i\n", trans->actual_length); + break; + case LIBUSB_TRANSFER_ERROR: + printf("TRANSFER ERRRO\n"); + break; + case LIBUSB_TRANSFER_TIMED_OUT: + printf("transfer timed out\n"); + + break; + case LIBUSB_TRANSFER_OVERFLOW: + printf("transfer overflow\n"); + + break; + case LIBUSB_TRANSFER_STALL: + printf("transfer stalled\n"); + break; + } + context->mPacketProcessed.notify_one(); +} +#endif + +/** @brief Finds all chips connected to usb ports + @return number of devices found +*/ +int ConnectionUSB::RefreshDeviceList() +{ + #ifndef __unix__ + USBDevicePrimary->Close(); + currentDeviceIndex = -1; + m_deviceNames.clear(); + string name; + if (USBDevicePrimary->DeviceCount()) + { + for (int i=0; iDeviceCount(); ++i) + { + Open(i); + name = DeviceName(); + m_deviceNames.push_back(name); + } + currentDeviceIndex = -1; + } + #else + m_dev_pid_vid.clear(); + m_deviceNames.clear(); + int usbDeviceCount = libusb_get_device_list(ctx, &devs); + if(usbDeviceCount > 0) + { + libusb_device_descriptor desc; + for(int i=0; i(pid,vid)); + } + else if(pid == 241) + { + m_hardwareName = HW_DIGIRED; + libusb_device_handle *tempDev_handle; + tempDev_handle = libusb_open_device_with_vid_pid(ctx, vid, pid); + if(libusb_kernel_driver_active(tempDev_handle, 0) == 1) //find out if kernel driver is attached + { + if(libusb_detach_kernel_driver(tempDev_handle, 0) == 0) //detach it + printf("Kernel Driver Detached!\n"); + } + if(libusb_claim_interface(tempDev_handle, 0) < 0) //claim interface 0 (the first) of device + { + printf("Cannot Claim Interface\n"); + } + + string fullName; + //check operating speed + int speed = libusb_get_device_speed(devs[i]); + if(speed == LIBUSB_SPEED_HIGH) + fullName = "USB 2.0"; + else if(speed == LIBUSB_SPEED_SUPER) + fullName = "USB 3.0"; + else + fullName = "USB"; + fullName += " ("; + //read device name + char data[255]; + memset(data, 0, 255); + int st = libusb_get_string_descriptor_ascii(tempDev_handle, 2, (unsigned char*)data, 255); + if(strlen(data) > 0) + fullName += data; + fullName += ")"; + libusb_close(tempDev_handle); + + m_deviceNames.push_back(fullName); + m_dev_pid_vid.push_back( pair(pid,vid)); + } + } + } + } + else + { + libusb_free_device_list(devs, 1); + return 0; + } + #endif + return m_deviceNames.size(); +} + +void ConnectionUSB::ClearComm() +{ +} + +/** @return name of currently opened device as string. +*/ +string ConnectionUSB::DeviceName() +{ +#ifndef __unix__ + string name; + char tempName[USB_STRING_MAXLEN]; + //memcpy(tempName, USBDevicePrimary->FriendlyName, USB_STRING_MAXLEN); + //name = tempName; + + for (int i = 0; i < USB_STRING_MAXLEN; ++i) + tempName[i] = USBDevicePrimary->DeviceName[i]; + if (USBDevicePrimary->bSuperSpeed == true) + name = "USB 3.0"; + else if (USBDevicePrimary->bHighSpeed == true) + name = "USB 2.0"; + else + name = "USB"; + name += " ("; + name += tempName; + name += ")"; + return name; +#else + if(dev_handle != 0) + { + char data[255]; + int st = libusb_get_string_descriptor_ascii(dev_handle, 2, (unsigned char*)data, 255); + return string(data); + } + return "no name"; +#endif +} + +/** + @brief Starts asynchronous data reading from board + @param *buffer buffer where to store received data + @param length number of bytes to read + @return handle of transfer context +*/ +int ConnectionUSB::BeginDataReading(char *buffer, long length) +{ + int i = 0; + bool contextFound = false; + //find not used context + for(i = 0; iBeginDataXfer((unsigned char*)buffer, length, contexts[i].inOvLap); + return i; + #else + unsigned int Timeout = 1000; + libusb_transfer *tr = contexts[i].transfer; + libusb_fill_bulk_transfer(tr, dev_handle, 0x81, (unsigned char*)buffer, length, callback_libusbtransfer, &contexts[i], Timeout); + contexts[i].done = false; + contexts[i].bytesXfered = 0; + contexts[i].bytesExpected = length; + int status = libusb_submit_transfer(tr); + int actual = 0; + //int status = libusb_bulk_transfer(dev_handle, 0x81, (unsigned char*)buffer, length, &actual, USB_TIMEOUT); + if(status != 0) + printf("ERROR BEGIN DATA TRANSFER %s\n", libusb_error_name(status)); + #endif + return i; +} + +/** + @brief Waits for asynchronous data reception + @param contextHandle handle of which context data to wait + @param timeout_ms number of miliseconds to wait + @return 1-data received, 0-data not received +*/ +int ConnectionUSB::WaitForReading(int contextHandle, unsigned int timeout_ms) +{ + if( contexts[contextHandle].used == true && contextHandle >= 0) + { + int status = 0; + #ifndef __unix__ + if(InEndPt) + status = InEndPt->WaitForXfer(contexts[contextHandle].inOvLap, timeout_ms); + return status; + #else + + struct timeval tv; + tv.tv_sec = 0; + tv.tv_usec = 0; + if(libusb_handle_events_timeout_completed(ctx, &tv, NULL) != 0) + printf("error libusb_handle_events %i\n", status); + + auto t1 = chrono::high_resolution_clock::now(); + auto t2 = chrono::high_resolution_clock::now(); + + while(contexts[contextHandle].done == false && std::chrono::duration_cast(t2 - t1).count() < timeout_ms) + { + struct timeval tv; + tv.tv_sec = 0; + tv.tv_usec = 300; + std::this_thread::yield(); + //if(libusb_handle_events(ctx) != 0) + if(libusb_handle_events_timeout_completed(ctx, &tv, NULL) != 0) + printf("error libusb_handle_events %i\n", status); + t2 = chrono::high_resolution_clock::now(); + //std::this_thread::sleep_for(std::chrono::milliseconds(1)); + } + std::unique_lock lck(contexts[contextHandle].m_lock); + while(contexts[contextHandle].done == false) //is changed in libusb callback + { + if(contexts[contextHandle].mPacketProcessed.wait_for(lck, std::chrono::milliseconds(timeout_ms)) == std::cv_status::timeout) + return 0; + } + return contexts[contextHandle].done == true; + #endif + } + else + return 0; +} + +/** + @brief Finishes asynchronous data reading from board + @param buffer array where to store received data + @param length number of bytes to read, function changes this value to number of bytes actually received + @param contextHandle handle of which context to finish + @return false failure, true number of bytes received +*/ +int ConnectionUSB::FinishDataReading(char *buffer, long &length, int contextHandle) +{ + if( contexts[contextHandle].used == true && contextHandle >= 0) + { + #ifndef __unix__ + int status = 0; + if(InEndPt) + status = InEndPt->FinishDataXfer((unsigned char*)buffer, length, contexts[contextHandle].inOvLap, contexts[contextHandle].context); + contexts[contextHandle].used = false; + contexts[contextHandle].reset(); + return length; + #else + length = contexts[contextHandle].bytesXfered; + contexts[contextHandle].used = false; + contexts[contextHandle].reset(); + return length; + #endif + } + else + return 0; +} + +int ConnectionUSB::ReadDataBlocking(char *buffer, long &length, int timeout_ms) +{ +#ifndef __unix__ + return InEndPt->XferData((unsigned char*)buffer, length); +#else + return 0; +#endif +} + + +/** + @brief Aborts reading operations +*/ +void ConnectionUSB::AbortReading() +{ +#ifndef __unix__ + InEndPt->Abort(); +#else + for(int i=0; iBeginDataXfer((unsigned char*)buffer, length, contextsToSend[i].inOvLap); + return i; + #else + unsigned int Timeout = 1000; + libusb_transfer *tr = contextsToSend[i].transfer; + //libusb_set_iso_packet_lengths(contexts[i].transfer, 512*64); + libusb_fill_bulk_transfer(tr, dev_handle, 0x1, (unsigned char*)buffer, length, callback_libusbtransfer, &contextsToSend[i], Timeout); + contextsToSend[i].done = false; + contextsToSend[i].bytesXfered = 0; + contextsToSend[i].bytesExpected = length; + libusb_submit_transfer(tr); + #endif + return i; +} + +/** + @brief Waits for asynchronous data sending + @param contextHandle handle of which context data to wait + @param timeout_ms number of miliseconds to wait + @return 1-data received, 0-data not received +*/ +int ConnectionUSB::WaitForSending(int contextHandle, unsigned int timeout_ms) +{ + if( contextsToSend[contextHandle].used == true ) + { + #ifndef __unix__ + int status = 0; + if(OutEndPt) + status = OutEndPt->WaitForXfer(contextsToSend[contextHandle].inOvLap, timeout_ms); + return status; + #else + auto t1 = chrono::high_resolution_clock::now(); + auto t2 = chrono::high_resolution_clock::now(); + while(contextsToSend[contextHandle].done == false && std::chrono::duration_cast(t2 - t1).count() < timeout_ms) + { + /* struct timeval tv; + tv.tv_sec = 1; + tv.tv_usec = 0; + int status = libusb_handle_events_timeout_completed(ctx, &tv, NULL); + if(status != 0) + printf("error libusb_handle_events %i\n", status);*/ + t2 = chrono::high_resolution_clock::now(); + //std::this_thread::sleep_for(std::chrono::milliseconds(1)); + } + std::unique_lock lck(contextsToSend[contextHandle].m_lock); + while(contextsToSend[contextHandle].done == false) //is changed in libusb callback + { + if(contextsToSend[contextHandle].mPacketProcessed.wait_for(lck, std::chrono::milliseconds(timeout_ms)) == std::cv_status::timeout) + return 0; + } + return contextsToSend[contextHandle].done == true; + #endif + } + else + return 0; +} + +/** + @brief Finishes asynchronous data sending to board + @param buffer array where to store received data + @param length number of bytes to read, function changes this value to number of bytes acctually received + @param contextHandle handle of which context to finish + @return false failure, true number of bytes sent +*/ +int ConnectionUSB::FinishDataSending(const char *buffer, long &length, int contextHandle) +{ + if( contextsToSend[contextHandle].used == true) + { + #ifndef __unix__ + if(OutEndPt) + OutEndPt->FinishDataXfer((unsigned char*)buffer, length, contextsToSend[contextHandle].inOvLap, contextsToSend[contextHandle].context); + contextsToSend[contextHandle].used = false; + contextsToSend[contextHandle].reset(); + return length; + #else + length = contextsToSend[contextHandle].bytesXfered; + contextsToSend[contextHandle].used = false; + contextsToSend[contextHandle].reset(); + return length; + #endif + } + else + return 0; +} + +/** + @brief Aborts sending operations +*/ +void ConnectionUSB::AbortSending() +{ +#ifndef __unix__ + OutEndPt->Abort(); +#else + for (int i = 0; i ConnectionUSB::GetDeviceNames() +{ + return m_deviceNames; +} diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/ConnectionUSB.h b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/ConnectionUSB.h new file mode 100644 index 0000000000..f3048c1842 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/ConnectionUSB.h @@ -0,0 +1,144 @@ +/** +@file ConnectionUSB.h +@author Lime Microsystems (www.limemicro.com) +@brief Class for data writing and reading through USB port +*/ + +#ifndef USB_PORT_CONNECTION_H +#define USB_PORT_CONNECTION_H + +#include "IConnection.h" + +#ifndef __unix__ +#include "windows.h" +#include "CyAPI.h" +#else +#include +#include +#include +#include +#endif + +#define USB_MAX_CONTEXTS 64 //maximum number of contexts for asynchronous transfers + +/** @brief Wrapper class for holding USB asynchronous transfers contexts +*/ +class USBTransferContext +{ +public: + USBTransferContext() : used(false) + { + #ifndef __unix__ + inOvLap = new OVERLAPPED; + memset(inOvLap, 0, sizeof(OVERLAPPED)); + inOvLap->hEvent = CreateEvent(NULL, false, false, NULL); + context = NULL; + #else + transfer = libusb_alloc_transfer(0); + bytesXfered = 0; + bytesExpected = 0; + done = 0; + #endif + } + ~USBTransferContext() + { + #ifndef __unix__ + CloseHandle(inOvLap->hEvent); + delete inOvLap; + #else + libusb_free_transfer(transfer); + #endif + } + bool reset() + { + if(used) + return false; + #ifndef __unix__ + CloseHandle(inOvLap->hEvent); + memset(inOvLap, 0, sizeof(OVERLAPPED)); + inOvLap->hEvent = CreateEvent(NULL, false, false, NULL); + #endif + return true; + } + bool used; + #ifndef __unix__ + PUCHAR context; + OVERLAPPED *inOvLap; + #else + libusb_transfer* transfer; + long bytesXfered; + long bytesExpected; + bool done; + std::mutex m_lock; + std::condition_variable mPacketProcessed; + #endif +}; + +class ConnectionUSB : public IConnection +{ +public: + ConnectionUSB(); + ~ConnectionUSB(); + + void FindDevices(); + DeviceStatus Open(); + DeviceStatus Open(unsigned index); + void Close(); + bool IsOpen(); + int GetOpenedIndex(); + + int Write(const unsigned char *buffer, int length, int timeout_ms = 0); + int Read(unsigned char *buffer, int length, int timeout_ms = 0); + + virtual int BeginDataReading(char *buffer, long length); + virtual int WaitForReading(int contextHandle, unsigned int timeout_ms); + virtual int FinishDataReading(char *buffer, long &length, int contextHandle); + virtual void AbortReading(); + virtual int ReadDataBlocking(char *buffer, long &length, int timeout_ms); + + virtual int BeginDataSending(const char *buffer, long length); + virtual int WaitForSending(int contextHandle, unsigned int timeout_ms); + virtual int FinishDataSending(const char *buffer, long &length, int contextHandle); + virtual void AbortSending(); + + std::vector GetDeviceNames(); + int RefreshDeviceList(); + void ClearComm(); +private: + int currentDeviceIndex; + std::string DeviceName(); + + std::vector m_deviceNames; + std::string m_hardwareName; + int m_hardwareVer; + + USBTransferContext contexts[USB_MAX_CONTEXTS]; + USBTransferContext contextsToSend[USB_MAX_CONTEXTS]; + void Initialize(); + + bool isConnected; + int currentPortIndex; + + #ifndef __unix__ + CCyUSBDevice *USBDevicePrimary; + //control endpoints for DigiRed + CCyControlEndPoint *InCtrlEndPt3; + CCyControlEndPoint *OutCtrlEndPt3; + + //control endpoints for DigiGreen + CCyUSBEndPoint *OutCtrEndPt; + CCyUSBEndPoint *InCtrEndPt; + + //end points for samples reading and writing + CCyUSBEndPoint *InEndPt; + CCyUSBEndPoint *OutEndPt; + + #else + libusb_device **devs; //pointer to pointer of device, used to retrieve a list of devices + libusb_device_handle *dev_handle; //a device handle + libusb_context *ctx; //a libusb session + std::vector > m_dev_pid_vid; + #endif +}; + +#endif diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/IConnection.h b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/IConnection.h new file mode 100644 index 0000000000..5804f1149f --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/IConnection.h @@ -0,0 +1,68 @@ +/** + @file IConnection.h + @author Lime Microsystems + @brief Interface class for connection types +*/ + +#ifndef ICONNECTION_H +#define ICONNECTION_H + +#include +#include + +using namespace std; + +class IConnection +{ +public: + /// Supported connection types. + enum eConnectionType + { + CONNECTION_UNDEFINED = -1, + COM_PORT = 0, + USB_PORT = 1, + SPI_PORT = 2, + //insert new types here + CONNECTION_TYPES_COUNT //used only for memory allocation + }; + + enum DeviceStatus + { + SUCCESS, + FAILURE, + END_POINTS_NOT_FOUND, + CANNOT_CLAIM_INTERFACE + }; + + IConnection() : m_connectionType(CONNECTION_UNDEFINED){}; + virtual ~IConnection(){}; + virtual int RefreshDeviceList() = 0; + virtual DeviceStatus Open(unsigned i) = 0; + virtual void Close() = 0; + virtual bool IsOpen() = 0; + virtual int GetOpenedIndex() = 0; + + virtual int Write(const unsigned char *buffer, int length, int timeout_ms = 0) = 0; + virtual int Read(unsigned char *buffer, int length, int timeout_ms = 0) = 0; + + virtual std::vector GetDeviceNames() = 0; + + virtual eConnectionType GetType() { return m_connectionType; }; + virtual bool SetParam(const char *name, const char* value) {return false;}; + + virtual int BeginDataReading(char *buffer, long length){ return -1; }; + virtual int WaitForReading(int contextHandle, unsigned int timeout_ms){ return 0;}; + virtual int FinishDataReading(char *buffer, long &length, int contextHandle){ return 0;} + virtual void AbortReading(){}; + virtual int ReadDataBlocking(char *buffer, long &length, int timeout_ms){ return 0; } + + virtual int BeginDataSending(const char *buffer, long length){ return -1; }; + virtual int WaitForSending(int contextHandle, unsigned int timeout_ms){ return 0;}; + virtual int FinishDataSending(const char *buffer, long &length, int contextHandle){ return 0;} + virtual void AbortSending(){}; +protected: + eConnectionType m_connectionType; +}; + +#endif + diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/lmsComms.cpp b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/lmsComms.cpp new file mode 100644 index 0000000000..0e5ec66762 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/lmsComms.cpp @@ -0,0 +1,325 @@ +/** +@file LMScomms.cpp +@author Lime Microsystems (www.limemicro.com) +@brief Implementation of data transmission to LMS boards +*/ + +#include "lmsComms.h" + +LMScomms::LMScomms(const IConnection::eConnectionType port_type) : ConnectionManager(port_type) +{ + callback_logData = nullptr; + unsigned short test = 0x1234; + unsigned char* bytes = (unsigned char*)&test; + if(bytes[0] == 0x12 && bytes[1] == 0x34) + mSystemBigEndian = true; + else + mSystemBigEndian = false; +} + +LMScomms::~LMScomms() +{ +} + +/** @brief Transfers data between packet and connected device + @param pkt packet containing output data and to receive incomming data + @return 0: success, other: failure +*/ +LMScomms::TransferStatus LMScomms::TransferPacket(GenericPacket& pkt) +{ + std::lock_guard lock(mControlPortLock); + TransferStatus status = TRANSFER_SUCCESS; + if(IsOpen() == false) + return NOT_CONNECTED; + + int packetLen; + eLMS_PROTOCOL protocol = LMS_PROTOCOL_UNDEFINED; + if(activeControlPort->GetType() == IConnection::SPI_PORT) + protocol = LMS_PROTOCOL_NOVENA; + else + protocol = LMS_PROTOCOL_LMS64C; + switch(protocol) + { + case LMS_PROTOCOL_UNDEFINED: + return TRANSFER_FAILED; + case LMS_PROTOCOL_LMS64C: + packetLen = ProtocolLMS64C::pktLength; + break; + case LMS_PROTOCOL_NOVENA: + packetLen = pkt.outBuffer.size() > ProtocolNovena::pktLength ? ProtocolNovena::pktLength : pkt.outBuffer.size(); + break; + default: + packetLen = 0; + return TRANSFER_FAILED; + } + int outLen = 0; + unsigned char* outBuffer = NULL; + outBuffer = PreparePacket(pkt, outLen, protocol); + unsigned char* inBuffer = new unsigned char[outLen]; + memset(inBuffer, 0, outLen); + + int outBufPos = 0; + int inDataPos = 0; + if(outLen == 0) + { + //printf("packet outlen = 0\n"); + outLen = 1; + } + + if(protocol == LMS_PROTOCOL_NOVENA) + { + bool transferData = true; //some commands are fake, so don't need transferring + if(pkt.cmd == CMD_GET_INFO) + { + //spi does not have GET INFO, fake it to inform what device it is + pkt.status = STATUS_COMPLETED_CMD; + pkt.inBuffer.clear(); + pkt.inBuffer.resize(64, 0); + pkt.inBuffer[0] = 0; //firmware + pkt.inBuffer[1] = LMS_DEV_NOVENA; //device + pkt.inBuffer[2] = 0; //protocol + pkt.inBuffer[3] = 0; //hardware + pkt.inBuffer[4] = EXP_BOARD_UNSUPPORTED; //expansion + transferData = false; + } + + if(transferData) + { + if (callback_logData) + callback_logData(true, outBuffer, outLen); + int bytesWritten = Write(outBuffer, outLen); + if( bytesWritten == outLen) + { + if(pkt.cmd == CMD_LMS7002_RD) + { + inDataPos = Read(&inBuffer[inDataPos], outLen); + if(inDataPos != outLen) + status = TRANSFER_FAILED; + else + { + if (callback_logData) + callback_logData(false, inBuffer, inDataPos); + } + } + ParsePacket(pkt, inBuffer, inDataPos, protocol); + } + else + status = TRANSFER_FAILED; + } + } + else + { + for(int i=0; i= 5) + { + info.firmware = pkt.inBuffer[0]; + info.device = pkt.inBuffer[1] < LMS_DEV_COUNT ? (eLMS_DEV)pkt.inBuffer[1] : LMS_DEV_UNKNOWN; + info.protocol = pkt.inBuffer[2]; + info.hardware = pkt.inBuffer[3]; + info.expansion = pkt.inBuffer[4] < EXP_BOARD_COUNT ? (eEXP_BOARD)pkt.inBuffer[4] : EXP_BOARD_UNKNOWN; + } + return info; +} + +/** @brief Takes generic packet and converts to specific protocol buffer + @param pkt generic data packet to convert + @param length returns length of returned buffer + @param protocol which protocol to use for data + @return pointer to data buffer, must be manually deleted after use +*/ +unsigned char* LMScomms::PreparePacket(const GenericPacket& pkt, int& length, const eLMS_PROTOCOL protocol) +{ + unsigned char* buffer = NULL; + if(protocol == LMS_PROTOCOL_UNDEFINED) + return NULL; + + if(protocol == LMS_PROTOCOL_LMS64C) + { + ProtocolLMS64C packet; + int maxDataLength = packet.maxDataLength; + packet.cmd = pkt.cmd; + packet.status = pkt.status; + int byteBlockRatio = 1; //block ratio - how many bytes in one block + switch( packet.cmd ) + { + case CMD_PROG_MCU: + case CMD_GET_INFO: + case CMD_SI5351_RD: + case CMD_SI5356_RD: + byteBlockRatio = 1; + break; + case CMD_SI5351_WR: + case CMD_SI5356_WR: + byteBlockRatio = 2; + break; + case CMD_LMS7002_RD: + case CMD_BRDSPI_RD: + case CMD_BRDSPI8_RD: + byteBlockRatio = 2; + break; + case CMD_ADF4002_WR: + byteBlockRatio = 3; + break; + case CMD_LMS7002_WR: + case CMD_BRDSPI_WR: + case CMD_ANALOG_VAL_WR: + byteBlockRatio = 4; + break; + default: + byteBlockRatio = 1; + } + if (packet.cmd == CMD_LMS7002_RD || packet.cmd == CMD_BRDSPI_RD) + maxDataLength = maxDataLength/2; + if (packet.cmd == CMD_ANALOG_VAL_RD) + maxDataLength = maxDataLength / 4; + int blockCount = pkt.outBuffer.size()/byteBlockRatio; + int bufLen = blockCount/(maxDataLength/byteBlockRatio) + +(blockCount%(maxDataLength/byteBlockRatio)!=0); + bufLen *= packet.pktLength; + if(bufLen == 0) + bufLen = packet.pktLength; + buffer = new unsigned char[bufLen]; + memset(buffer, 0, bufLen); + int srcPos = 0; + for(int j=0; j*packet.pktLength (maxDataLength/byteBlockRatio)) + { + buffer[pktPos+2] = maxDataLength/byteBlockRatio; + blockCount -= buffer[pktPos+2]; + } + else + buffer[pktPos+2] = blockCount; + memcpy(&buffer[pktPos+3], packet.reserved, sizeof(packet.reserved)); + int bytesToPack = (maxDataLength/byteBlockRatio)*byteBlockRatio; + for (int k = 0; k callback) +{ + callback_logData = callback; +} diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/lmsComms.h b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/lmsComms.h new file mode 100644 index 0000000000..f811d29302 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/connectionManager/lmsComms.h @@ -0,0 +1,111 @@ +/** +@file LMScomms.h +@author Lime Microsystems (www.limemicro.com) +@brief Class for handling data transmission to LMS boards +*/ + +#ifndef LMS_COMMS_H +#define LMS_COMMS_H + +#include "lms7002_defines.h" +#include "ConnectionManager.h" +#include +#include + +struct LMSinfo +{ + eLMS_DEV device; + eEXP_BOARD expansion; + int firmware; + int hardware; + int protocol; +}; + +/* @brief Class for abstracting transfering data to and from chip +*/ +class LMScomms : public ConnectionManager +{ +public: + enum TransferStatus + { + TRANSFER_SUCCESS, + TRANSFER_FAILED, + NOT_CONNECTED + }; + + enum eLMS_PROTOCOL + { + LMS_PROTOCOL_UNDEFINED = 0, + LMS_PROTOCOL_DIGIC, + LMS_PROTOCOL_LMS64C, + LMS_PROTOCOL_NOVENA, + }; + struct ProtocolDIGIC + { + static const int pktLength = 64; + static const int maxDataLength = 60; + ProtocolDIGIC() : cmd(0), i2cAddr(0), blockCount(0) {}; + unsigned char cmd; + unsigned char i2cAddr; + unsigned char blockCount; + unsigned char reserved; + unsigned char data[maxDataLength]; + }; + + struct ProtocolLMS64C + { + static const int pktLength = 64; + static const int maxDataLength = 56; + ProtocolLMS64C() :cmd(0),status(STATUS_UNDEFINED),blockCount(0) + { + memset(reserved, 0, 5); + }; + unsigned char cmd; + unsigned char status; + unsigned char blockCount; + unsigned char reserved[5]; + unsigned char data[maxDataLength]; + }; + + struct ProtocolNovena + { + static const int pktLength = 128; + static const int maxDataLength = 128; + ProtocolNovena() :cmd(0),status(0) {}; + unsigned char cmd; + unsigned char status; + unsigned char blockCount; + unsigned char data[maxDataLength]; + }; + + struct GenericPacket + { + GenericPacket() + { + cmd = CMD_GET_INFO; + status = STATUS_UNDEFINED; + } + + eCMD_LMS cmd; + eCMD_STATUS status; + vector outBuffer; + vector inBuffer; + }; + + LMScomms(const IConnection::eConnectionType port_type); + ~LMScomms(); + + virtual TransferStatus TransferPacket(GenericPacket &pkt); + LMSinfo GetInfo(); + void SetDataLogCallback(std::function callback); +protected: + std::function callback_logData; + std::mutex mControlPortLock; + unsigned char* PreparePacket(const GenericPacket &pkt, int &length, const eLMS_PROTOCOL protocol); + int ParsePacket(GenericPacket &pkt, const unsigned char* buffer, const int length, const eLMS_PROTOCOL protocol); +protected: + bool mSystemBigEndian; +}; + +#endif // LMS_COMMS_H + diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/dataTypes.h b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/dataTypes.h new file mode 100644 index 0000000000..cba2b7341e --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/dataTypes.h @@ -0,0 +1,33 @@ +#ifndef LMS_DATA_TYPES_H +#define LMS_DATA_TYPES_H + +typedef struct +{ + uint8_t reserved[8]; + uint64_t counter; + int16_t samples[2040]; +} PacketLTE; + +typedef struct +{ + int16_t i; + int16_t q; +} complex16_t; + +typedef struct +{ + uint64_t timestamp; //timestamp of the packet + uint16_t first; //index of first unused sample in samples[] + uint16_t last; //end index of samples + static const uint16_t samplesCount = 1024; //maximum number of samples in packet + complex16_t samples[samplesCount]; //must be power of two +} SamplesPacket; + +complex16_t operator &=(complex16_t & other1, const complex16_t & other) // copy assignment +{ + other1.i = other.i; + other1.q = other.q; + return other1; +} + +#endif \ No newline at end of file diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/fifo.h b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/fifo.h new file mode 100644 index 0000000000..1868c64af7 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/fifo.h @@ -0,0 +1,180 @@ +#ifndef LMS_FIFO_BUFFER_H +#define LMS_FIFO_BUFFER_H + +#include +#include +#include +#include +#include +#include "dataTypes.h" + +class LMS_SamplesFIFO +{ +public: + struct BufferInfo + { + uint32_t size; + uint32_t itemsFilled; + }; + + BufferInfo GetInfo() + { + std::unique_lock lck2(readLock); + std::unique_lock lck(writeLock); + BufferInfo stats; + stats.size = (uint32_t)mBuffer.size(); + stats.itemsFilled = mElementsFilled.load(); + return stats; + } + + LMS_SamplesFIFO(uint32_t bufLength) + { + Reset(bufLength); + } + + ~LMS_SamplesFIFO(){}; + + /** @brief inserts items to ring buffer + @param buffer data source + @param itemCount number of buffer items to insert + @param timeout_ms timeout duration for operation + @param overwrite enable to overwrite oldest items inside the buffer + @return number of items added + */ + uint32_t push_packet(SamplesPacket *buffer, const uint32_t itemCount, const uint32_t timeout_ms, const bool overwrite = true) + { + uint32_t addedItems = 0; + std::unique_lock lck(writeLock); + while (addedItems < itemCount) + { + while (mElementsFilled.load() >= mBuffer.size()) //wait for free space to insert items + { + if (canWrite.wait_for(lck, std::chrono::milliseconds(timeout_ms)) == std::cv_status::timeout) + return addedItems; //dropped all items + } + + uint32_t itemsToInsert = itemCount - addedItems; + uint32_t itemsToEnd = (uint32_t)mBuffer.size() - mTail.load(); //might need to split memcpy into two operations + if (itemsToInsert > itemsToEnd) + { + memcpy(&mBuffer[mTail], &buffer[addedItems], itemsToEnd*sizeof(SamplesPacket)); + memcpy(&mBuffer[0], &buffer[addedItems+itemsToEnd], (itemsToInsert - itemsToEnd)*sizeof(SamplesPacket)); + } + else + memcpy(&mBuffer[mTail], &buffer[addedItems], itemsToInsert*sizeof(SamplesPacket)); + mTail.store((mTail.load() + itemsToInsert) & (mBuffer.size() - 1)); + mElementsFilled.fetch_add(itemsToInsert); + canRead.notify_one(); + addedItems += itemsToInsert; + } + return addedItems; + } + + /** @brief inserts items to ring buffer + @param buffer data source + @param itemCount number of buffer items to insert + @param timeout_ms timeout duration for operation + @param overwrite enable to overwrite oldest items inside the buffer + @return number of items added + */ + uint32_t push_samples(const complex16_t *buffer, const uint32_t samplesCount, uint64_t timestamp, const uint32_t timeout_ms, const bool overwrite = true) + { + assert(buffer != nullptr); + const int samplesInPacket = SamplesPacket::samplesCount; + uint32_t samplesTaken = 0; + std::unique_lock lck(writeLock); + while (samplesTaken < samplesCount) + { + while (mElementsFilled.load() >= mBuffer.size()) //buffer might be full, wait for free slots + { + if (canWrite.wait_for(lck, std::chrono::milliseconds(timeout_ms)) == std::cv_status::timeout) + return samplesTaken; + } + + int tailIndex = mTail.load(); //which element to fill + while (mElementsFilled.load() < mBuffer.size() && samplesTaken < samplesCount) // not to release lock too often + { + mBuffer[tailIndex].timestamp = timestamp + samplesTaken; + mBuffer[tailIndex].first = 0; + mBuffer[tailIndex].last = 0; + while (mBuffer[tailIndex].last < samplesInPacket && samplesTaken < samplesCount) + { + mBuffer[tailIndex].samples[mBuffer[tailIndex].last++] = buffer[samplesTaken++]; + } + mTail.store((tailIndex + 1) & (mBuffer.size() - 1));//advance to next one + tailIndex = mTail.load(); + mElementsFilled.fetch_add(1); + canRead.notify_one(); + } + } + return samplesTaken; + } + + /** @brief Takes items out of ring buffer + @param buffer data destination + @param samplesCount number of samples to pop + @param timestamp returns timestamp of the first sample in buffer + @param timeout_ms timeout duration for operation + @return number of samples returned + */ + uint32_t pop_samples(complex16_t* buffer, const uint32_t samplesCount, uint64_t *timestamp, const uint32_t timeout_ms) + { + assert(buffer != nullptr); + const int samplesInPacket = SamplesPacket::samplesCount; + uint32_t samplesFilled = 0; + *timestamp = 0; + std::unique_lock lck(readLock); + while (samplesFilled < samplesCount) + { + while (mElementsFilled.load() == 0) //buffer might be empty, wait for packets + { + if (canRead.wait_for(lck, std::chrono::milliseconds(timeout_ms)) == std::cv_status::timeout) + return samplesFilled; + } + if(samplesFilled == 0) + *timestamp = mBuffer[mHead.load()].timestamp + mBuffer[mHead.load()].first; + + while(mElementsFilled.load() > 0 && samplesFilled < samplesCount) + { + int headIndex = mHead.load(); + while (mBuffer[headIndex].first < mBuffer[headIndex].last && samplesFilled < samplesCount) + { + buffer[samplesFilled++] = mBuffer[headIndex].samples[mBuffer[headIndex].first++]; + } + if (mBuffer[headIndex].first == mBuffer[headIndex].last) //packet depleated + { + mBuffer[headIndex].first = 0; + mBuffer[headIndex].last = 0; + mBuffer[headIndex].timestamp = 0; + mHead.store( (headIndex + 1) & (mBuffer.size() - 1) );//advance to next one + headIndex = mHead.load(); + mElementsFilled.fetch_sub(1); + canWrite.notify_one(); + } + } + } + return samplesFilled; + } + + void Reset(uint32_t bufLength) + { + std::unique_lock lck(writeLock); + std::unique_lock lck2(readLock); + mBuffer.resize(bufLength); + mHead.store(0); + mTail.store(0); + mElementsFilled.store(0); + } + +protected: + std::vector mBuffer; + std::atomic mHead; + std::atomic mTail; + std::mutex writeLock; + std::mutex readLock; + std::atomic mElementsFilled; + std::condition_variable canWrite; + std::condition_variable canRead; +}; + +#endif diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/ringBuffer.h b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/ringBuffer.h new file mode 100644 index 0000000000..e4882f8924 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/ringBuffer.h @@ -0,0 +1,143 @@ +#ifndef LMS_RING_BUFFER_H +#define LMS_RING_BUFFER_H + +#include +#include +#include +#include + +template +class RingBuffer +{ +public: + struct BufferInfo + { + uint32_t size; + uint32_t itemsFilled; + }; + + BufferInfo GetInfo() + { + unique_lock lck(mLock); + BufferInfo stats; + stats.size = (uint32_t)mBuffer.size(); + stats.itemsFilled = mElementsFilled; + return stats; + } + + RingBuffer(uint32_t bufLength) + { + Reset(bufLength); + } + ~RingBuffer(){}; + + /** @brief inserts items to ring buffer + @param buffer data source + @param itemCount number of buffer items to insert + @param timeout_ms timeout duration for operation + @return number of items added + */ + uint32_t push_back(const T* buffer, const uint32_t itemCount, const uint32_t timeout_ms) + { + uint32_t addedItems = 0; + while (addedItems < itemCount) + { + unique_lock lck(mLock); + while (mElementsFilled >= mBuffer.size()) //wait for free space to insert items + { + if (canWrite.wait_for(lck, std::chrono::milliseconds(timeout_ms)) == std::cv_status::timeout) + return addedItems; //dropped all items + } + + uint32_t itemsToInsert = itemCount - addedItems; + uint32_t itemsToEnd = (uint32_t)mBuffer.size() - mTail.load(); //might need to split memcpy into two operations + if (itemsToInsert > itemsToEnd) + { + memcpy(&mBuffer[mTail], &buffer[addedItems], itemsToEnd*sizeof(T)); + memcpy(&mBuffer[0], &buffer[addedItems+itemsToEnd], (itemsToInsert - itemsToEnd)*sizeof(T)); + } + else + memcpy(&mBuffer[mTail], &buffer[addedItems], itemsToInsert*sizeof(T)); + mTail.store((mTail.load() + itemsToInsert) & (mBuffer.size() - 1)); + mElementsFilled += itemsToInsert; + lck.unlock(); + canRead.notify_one(); + addedItems += itemsToInsert; + } + return addedItems; + } + + /** @brief Takes items out of ring buffer + @param buffer data destination + @param itemCount number of items to extract from ring buffer + @param timeout_ms timeout duration for operation + @return number of items returned + */ + uint32_t pop_front(T* buffer, const uint32_t itemCount, const uint32_t timeout_ms) + { + assert(buffer != nullptr); + uint32_t itemsTaken = 0; + T* destBuffer = buffer; + while (itemsTaken < itemCount) + { + unique_lock lck(mLock); + while (mElementsFilled == 0) //buffer might be empty, wait for items + { + if (canRead.wait_for(lck, std::chrono::milliseconds(timeout_ms)) == std::cv_status::timeout) + return itemsTaken; + } + + unsigned int itemsToCopy = itemCount - itemsTaken; + if (itemsToCopy > mElementsFilled) + itemsToCopy = mElementsFilled; + unsigned int itemsToEnd = (uint32_t)mBuffer.size() - mHead.load(); //migth need to split memcpy into two operations + if (itemsToEnd < itemsToCopy) + { + memcpy(&destBuffer[itemsTaken], &mBuffer[mHead.load()], sizeof(T)*itemsToEnd); + memcpy(&destBuffer[itemsTaken+itemsToEnd], &mBuffer[0], sizeof(T)*(itemsToCopy - itemsToEnd)); + mHead.store((itemsToCopy - itemsToEnd) & (mBuffer.size() - 1)); + } + else + { + memcpy(&destBuffer[itemsTaken], &mBuffer[mHead.load()], sizeof(T)*itemsToCopy); + int headVal = mHead.load(); + int valueToStore = (headVal + itemsToCopy) & (mBuffer.size() - 1); + mHead.store(valueToStore); + headVal = mHead.load(); + } + mElementsFilled -= itemsToCopy; + lck.unlock(); + canWrite.notify_one(); + itemsTaken += itemsToCopy; + } + return itemsTaken; + } + + void Reset(uint32_t bufLength) + { + std::unique_lock lck(mLock); + if (bufLength >= (uint32_t)(1 << 31)) + bufLength = (uint32_t)(1 << 31); + for (int i = 0; i < 32; ++i) + if ((1 << i) >= bufLength) + { + bufLength = (1 << i); + break; + } + mBuffer.resize(bufLength); + mHead.store(0); + mTail.store(0); + mElementsFilled = 0; + } + +protected: + std::vector mBuffer; + std::atomic mHead; + std::atomic mTail; + std::mutex mLock; + uint32_t mElementsFilled; + std::condition_variable canWrite; + std::condition_variable canRead; +}; + +#endif diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lms_lib.cpp b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms_lib.cpp new file mode 100644 index 0000000000..8c85863e80 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms_lib.cpp @@ -0,0 +1,862 @@ +/******************************************************************************* + OpenAirInterface + Copyright(c) 1999 - 2014 Eurecom + + OpenAirInterface is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + + OpenAirInterface is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with OpenAirInterface.The full GNU General Public License is + included in this distribution in the file called "COPYING". If not, + see . + + Contact Information + OpenAirInterface Admin: openair_admin@eurecom.fr + OpenAirInterface Tech : openair_tech@eurecom.fr + OpenAirInterface Dev : openair4g-devel@eurecom.fr + + Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE + + *******************************************************************************/ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "common_lib.h" +#include "LMS_SDR.h" +#include "LMS7002M.h" +#include "Si5351C.h" +#include "LMS_StreamBoard.h" +#include "LMS7002M_RegistersMap.h" + +#include + + +///define for parameter enumeration if prefix might be needed +#define LMS7param(id) id + +LMScomms* usbport; +LMScomms* comport; +LMS7002M* lms7; +Si5351C* Si; +LMS_StreamBoard *lmsStream; + +#define RXDCLENGTH 4096 +#define NUMBUFF 40 +int16_t cos_fsover8[8] = {2047, 1447, 0, -1448, -2047, -1448, 0, 1447}; +int16_t cos_3fsover8[8] = {2047, -1448, 0, 1447, -2047, 1447, 0, -1448}; + +extern "C" +{ +int write_output(const char *fname,const char *vname,void *data,int length,int dec,char format); +} + +int trx_lms_write(openair0_device *device, openair0_timestamp timestamp, void **buff, int nsamps, int antenna_id, int flags) { + + LMS_TRxWrite((int16_t*)buff[0], nsamps,0, timestamp); + + return nsamps; +} + + +int trx_lms_read(openair0_device *device, openair0_timestamp *ptimestamp, void **buff, int nsamps, int antenna_id) { + + uint64_t timestamp; + int16_t *dst_ptr = (int16_t*) buff[0]; + int ret; + ret = LMS_TRxRead(dst_ptr, nsamps,0,×tamp, 100); + *ptimestamp=timestamp; + + return ret; +} +void set_rx_gain_offset(openair0_config_t *openair0_cfg, int chain_index) { + + int i=0; + // loop through calibration table to find best adjustment factor for RX frequency + double min_diff = 6e9,diff; + + while (openair0_cfg->rx_gain_calib_table[i].freq>0) { + diff = fabs(openair0_cfg->rx_freq[chain_index] - openair0_cfg->rx_gain_calib_table[i].freq); + printf("cal %d: freq %f, offset %f, diff %f\n", + i, + openair0_cfg->rx_gain_calib_table[i].freq, + openair0_cfg->rx_gain_calib_table[i].offset,diff); + if (min_diff > diff) { + min_diff = diff; + openair0_cfg->rx_gain_offset[chain_index] = openair0_cfg->rx_gain_calib_table[i].offset; + } + i++; + } + +} +/* +void calibrate_rf(openair0_device *device) { + + openair0_timestamp ptimestamp; + int16_t *calib_buffp,*calib_tx_buffp; + int16_t calib_buff[2*RXDCLENGTH]; + int16_t calib_tx_buff[2*RXDCLENGTH]; + int i,j; + int8_t offI,offQ,offIold,offQold,offInew,offQnew,offphase,offphaseold,offphasenew,offgain,offgainold,offgainnew; + int32_t meanI,meanQ,meanIold,meanQold; + int cnt=0,loop; + liblms7_status opStatus; + int16_t dcoffi; + int16_t dcoffq; + int16_t dccorri; + int16_t dccorrq; + const int16_t firCoefs[] = + { + -2531, + -517, + 2708, + 188, + -3059, + 216, + 3569, + -770, + -4199, + 1541, + 4886, + -2577, + -5552, + 3909, + 6108, + -5537, + -6457, + 7440, + 6507, + -9566, + -6174, + 11845, + 5391, + -14179, + -4110, + 16457, + 2310, + -18561, + 0, + 20369, + -2780, + -21752, + 5963, + 22610, + -9456, + -22859, + 13127, + 22444, + -16854, + -21319, + 20489, + 19492, + -23883, + -17002, + 26881, + 13902, + -29372, + -10313, + 31226, + 6345, + -32380, + -2141, + 32767, + -2141, + -32380, + 6345, + 31226, + -10313, + -29372, + 13902, + 26881, + -17002, + -23883, + 19492, + 20489, + -21319, + -16854, + 22444, + 13127, + -22859, + -9456, + 22610, + 5963, + -21752, + -2780, + 20369, + 0, + -18561, + 2310, + 16457, + -4110, + -14179, + 5391, + 11845, + -6174, + -9566, + 6507, + 7440, + -6457, + -5537, + 6108, + 3909, + -5552, + -2577, + 4886, + 1541, + -4199, + -770, + 3569, + 216, + -3059, + 188, + 2708, + -517, + -2531 + }; + + j=0; + for (i=0;iBackupAllRegisters(); + uint8_t ch = (uint8_t)lms7->Get_SPI_Reg_bits(LMS7param(MAC)); + //Stage 1 + uint8_t sel_band1_trf = (uint8_t)lms7->Get_SPI_Reg_bits(LMS7param(SEL_BAND1_TRF)); + uint8_t sel_band2_trf = (uint8_t)lms7->Get_SPI_Reg_bits(LMS7param(SEL_BAND2_TRF)); + { + uint16_t requiredRegs[] = { 0x0400, 0x040A, 0x010D, 0x040C }; + uint16_t requiredMask[] = { 0x6000, 0x3007, 0x0040, 0x00FF }; //CAPSEL, AGC_MODE, AGC_AVG, EN_DCOFF, Bypasses + uint16_t requiredValue[] = { 0x0000, 0x1007, 0x0040, 0x00BD }; + + lms7->Modify_SPI_Reg_mask(requiredRegs, requiredMask, requiredValue, 0, 3); + } + + // opStatus = lms7->SetFrequencySX(LMS7002M::Rx, device->openair0_cfg[0].tx_freq[0]/1e6,30.72); + // put TX on fs/4 + opStatus = lms7->CalibrateRxSetup(device->openair0_cfg[0].sample_rate/1e6); + if (opStatus != LIBLMS7_SUCCESS) { + printf("Cannot calibrate for %f MHz\n",device->openair0_cfg[0].sample_rate/1e6); + exit(-1); + } + // fill TX buffer with fs/8 complex sinusoid + offIold=offQold=64; + lms7->SetRxDCOFF(offIold,offQold); + LMS_RxStart(); + for (i=0;i (%d,%d)\n",offIold,offQold,meanIold,meanQold); + + offI=offQ=-64; + lms7->SetRxDCOFF(offI,offQ); + + for (i=0;i (%d,%d)\n",offI,offQ,meanI,meanQ); + + while (cnt++ < 7) { + + offInew=(offIold+offI)>>1; + offQnew=(offQold+offQ)>>1; + + if (meanI*meanI < meanIold*meanIold) { + meanIold = meanI; + offIold = offI; + printf("[LMS] *** RX DC: offI %d => %d\n",offIold,meanI); + } + if (meanQ*meanQ < meanQold*meanQold) { + meanQold = meanQ; + offQold = offQ; + printf("[LMS] *** RX DC: offQ %d => %d\n",offQold,meanQ); + } + offI = offInew; + offQ = offQnew; + + lms7->SetRxDCOFF(offI,offQ); + + for (i=0;i (%d,%d)\n",offI,offQ,meanI,meanQ); + } + + if (meanI*meanI < meanIold*meanIold) { + meanIold = meanI; + offIold = offI; + printf("[LMS] *** RX DC: offI %d => %d\n",offIold,meanI); + } + if (meanQ*meanQ < meanQold*meanQold) { + meanQold = meanQ; + offQold = offQ; + printf("[LMS] *** RX DC: offQ %d => %d\n",offQold,meanQ); + } + + printf("[LMS] RX DC: (%d,%d) => (%d,%d)\n",offIold,offQold,meanIold,meanQold); + + lms7->SetRxDCOFF(offIold,offQold); + + dcoffi = offIold; + dcoffq = offQold; + + lms7->Modify_SPI_Reg_bits(LMS7param(MAC), ch); + lms7->Modify_SPI_Reg_bits(LMS7param(AGC_MODE_RXTSP), 1); + lms7->Modify_SPI_Reg_bits(LMS7param(CAPSEL), 0); + + // TX LO leakage + offQold=offIold=127; + lms7->SPI_write(0x0204,(((int16_t)offIold)<<7)|offQold); + + { + uint16_t requiredRegs[] = { 0x0400, 0x040A, 0x010D, 0x040C }; + uint16_t requiredMask[] = { 0x6000, 0x3007, 0x0040, 0x00FF }; //CAPSEL, AGC_MODE, AGC_AVG, EN_DCOFF, Bypasses + uint16_t requiredValue[] = { 0x0000, 0x1007, 0x0040, 0x00BD }; + + lms7->Modify_SPI_Reg_mask(requiredRegs, requiredMask, requiredValue, 0, 3); + } + sel_band1_trf = (uint8_t)lms7->Get_SPI_Reg_bits(LMS7param(SEL_BAND1_TRF)); + sel_band2_trf = (uint8_t)lms7->Get_SPI_Reg_bits(LMS7param(SEL_BAND2_TRF)); + //B + lms7->Modify_SPI_Reg_bits(0x0100, 0, 0, 1); //EN_G_TRF 1 + if (sel_band1_trf == 1) + { + lms7->Modify_SPI_Reg_bits(LMS7param(PD_RLOOPB_1_RFE), 0); //PD_RLOOPB_1_RFE 0 + lms7->Modify_SPI_Reg_bits(LMS7param(EN_INSHSW_LB1_RFE), 0); //EN_INSHSW_LB1 0 + } + if (sel_band2_trf == 1) + { + lms7->Modify_SPI_Reg_bits(LMS7param(PD_RLOOPB_2_RFE), 0); //PD_RLOOPB_2_RFE 0 + lms7->Modify_SPI_Reg_bits(LMS7param(EN_INSHSW_LB2_RFE), 0); // EN_INSHSW_LB2 0 + } + // FixRXSaturation(); + + lms7->Modify_SPI_Reg_bits(LMS7param(GFIR3_BYP_RXTSP), 0); //GFIR3_BYP 0 + lms7->Modify_SPI_Reg_bits(LMS7param(HBD_OVR_RXTSP), 2); + lms7->Modify_SPI_Reg_bits(LMS7param(GFIR3_L_RXTSP), 7); + lms7->Modify_SPI_Reg_bits(LMS7param(GFIR3_N_RXTSP), 7); + + lms7->SetGFIRCoefficients(LMS7002M::Rx, 2, firCoefs, sizeof(firCoefs) / sizeof(int16_t)); + + for (i=0;i (%d,%d)\n",offIold,meanIold,meanQold); + + offI=-128; + lms7->SPI_write(0x0204,(((int16_t)offI)<<7)|offQold); + + for (i=0;i (%d,%d)\n",offI,meanI,meanQ); + cnt = 0; + while (cnt++ < 8) { + + offInew=(offIold+offI)>>1; + if (meanI*meanI+meanQ*meanQ < meanIold*meanIold +meanQold*meanQold) { + printf("[LMS] TX DC (offI): ([%d,%d]) => %d : %d\n",offIold,offI,offInew,meanI*meanI+meanQ*meanQ); + meanIold = meanI; + meanQold = meanQ; + offIold = offI; + } + offI = offInew; + lms7->SPI_write(0x0204,(((int16_t)offI)<<7)|offQold); + + for (i=0;i (%d,%d)\n",offI,meanI,meanQ); + } + + + if (meanI*meanI+meanQ*meanQ < meanIold*meanIold +meanQold*meanQold) { + printf("[LMS] TX DC (offI): ([%d,%d]) => %d : %d\n",offIold,offI,offInew,meanI*meanI+meanQ*meanQ); + meanIold = meanI; + meanQold = meanQ; + offIold = offI; + } + offQ=-128; + lms7->SPI_write(0x0204,(((int16_t)offIold)<<7)|offQ); + + for (i=0;i (%d,%d)\n",offQ,meanI,meanQ); + + cnt=0; + while (cnt++ < 8) { + + offQnew=(offQold+offQ)>>1; + if (meanI*meanI+meanQ*meanQ < meanIold*meanIold +meanQold*meanQold) { + printf("[LMS] TX DC (offQ): ([%d,%d]) => %d : %d\n",offQold,offQ,offQnew,meanI*meanI+meanQ*meanQ); + + meanIold = meanI; + meanQold = meanQ; + offQold = offQ; + } + offQ = offQnew; + lms7->SPI_write(0x0204,(((int16_t)offIold)<<7)|offQ); + + + for (i=0;i (%d,%d)\n",offQ,meanI,meanQ); + } + + LMS_RxStop(); + + printf("[LMS] TX DC: (%d,%d) => (%d,%d)\n",offIold,offQold,meanIold,meanQold); + + dccorri = offIold; + dccorrq = offQold; + + + lms7->RestoreAllRegisters(); + lms7->Modify_SPI_Reg_bits(LMS7param(MAC), ch); + + lms7->Modify_SPI_Reg_bits(LMS7param(DCOFFI_RFE), dcoffi); + lms7->Modify_SPI_Reg_bits(LMS7param(DCOFFQ_RFE), dcoffq); + lms7->Modify_SPI_Reg_bits(LMS7param(DCCORRI_TXTSP), dccorri); + lms7->Modify_SPI_Reg_bits(LMS7param(DCCORRQ_TXTSP), dccorrq); + // lms7->Modify_SPI_Reg_bits(LMS7param(GCORRI_TXTSP), gcorri); + // lms7->Modify_SPI_Reg_bits(LMS7param(GCORRQ_TXTSP), gcorrq); + // lms7->Modify_SPI_Reg_bits(LMS7param(IQCORR_TXTSP), iqcorr); + + // lms7->Modify_SPI_Reg_bits(LMS7param(DC_BYP_TXTSP), 0); //DC_BYP + lms7->Modify_SPI_Reg_bits(0x0208, 1, 0, 0); //GC_BYP PH_BYP + +} +*/ + +int trx_lms_start(openair0_device *device){ + + + LMS_Init(0, 128*1024); + usbport = LMS_GetUSBPort(); + //connect data stream port + LMS_UpdateDeviceList(usbport); + const char *name = LMS_GetDeviceName(usbport, 0); + printf("Connecting to device: %s\n",name); + + + + if (LMS_DeviceOpen(usbport, 0)==0) + { + Si = new Si5351C(); + lms7 = new LMS7002M(usbport); + liblms7_status opStatus; + + printf("Configuring Si5351C\n"); + Si->Initialize(usbport); + Si->SetPLL(0, 25000000, 0); + Si->SetPLL(1, 25000000, 0); + Si->SetClock(0, 27000000, true, false); + Si->SetClock(1, 27000000, true, false); + for (int i = 2; i < 8; ++i) + Si->SetClock(i, 27000000, false, false); + Si5351C::Status status = Si->ConfigureClocks(); + if (status != Si5351C::SUCCESS) + { + printf("Failed to configure Si5351C"); + exit(-1); + } + status = Si->UploadConfiguration(); + if (status != Si5351C::SUCCESS) + printf("Failed to upload Si5351C configuration"); + + + + lms7->ResetChip(); + + opStatus = lms7->LoadConfig(device->openair0_cfg[0].configFilename); + + if (opStatus != LIBLMS7_SUCCESS) { + printf("Failed to load configuration file %s\n",device->openair0_cfg[0].configFilename); + exit(-1); + } + opStatus = lms7->UploadAll(); + + if (opStatus != LIBLMS7_SUCCESS) { + printf("Failed to upload configuration file\n"); + exit(-1); + } + + // Set TX filter + + printf("Tuning TX filter\n"); + opStatus = lms7->TuneTxFilter(LMS7002M::TxFilter::TX_HIGHBAND,28.0); + + if (opStatus != LIBLMS7_SUCCESS) { + printf("Warning: Could not tune TX filter\n"); + } + + printf("Tuning RX filter\n"); + opStatus = lms7->TuneRxFilter(LMS7002M::RxFilter::RX_LPF_LOWBAND,5.0); + + if (opStatus != LIBLMS7_SUCCESS) { + printf("Warning: Could not tune TX filter\n"); + } + + opStatus = lms7->SetInterfaceFrequency(lms7->GetFrequencyCGEN_MHz(), + lms7->Get_SPI_Reg_bits(HBI_OVR_TXTSP), + lms7->Get_SPI_Reg_bits(HBD_OVR_RXTSP)); + if (opStatus != LIBLMS7_SUCCESS) { + printf("SetInterfaceFrequency failed: %f,%d,%d\n", + lms7->GetFrequencyCGEN_MHz(), + lms7->Get_SPI_Reg_bits(HBI_OVR_TXTSP), + lms7->Get_SPI_Reg_bits(HBD_OVR_RXTSP)); + } + else { + printf("SetInterfaceFrequency as %f,%d,%d\n", + lms7->GetFrequencyCGEN_MHz(), + lms7->Get_SPI_Reg_bits(HBI_OVR_TXTSP), + lms7->Get_SPI_Reg_bits(HBD_OVR_RXTSP)); + } + lmsStream = new LMS_StreamBoard(usbport); + LMS_StreamBoard::Status opStreamStatus; + // this will configure that sampling rate at output of FPGA + opStreamStatus = lmsStream->ConfigurePLL(usbport,device->openair0_cfg[0].sample_rate,device->openair0_cfg[0].sample_rate,90); + if (opStatus != LIBLMS7_SUCCESS){ + printf("Sample rate programming failed\n"); + exit(-1); + } + + opStatus = lms7->SetFrequencySX(LMS7002M::Tx, device->openair0_cfg[0].tx_freq[0]/1e6,30.72); + + if (opStatus != LIBLMS7_SUCCESS) { + printf("Cannot set TX frequency %f MHz\n",device->openair0_cfg[0].tx_freq[0]/1e6); + exit(-1); + } + else { + printf("Set TX frequency %f MHz\n",device->openair0_cfg[0].tx_freq[0]/1e6); + } + opStatus = lms7->SetFrequencySX(LMS7002M::Rx, device->openair0_cfg[0].rx_freq[0]/1e6,30.72); + + if (opStatus != LIBLMS7_SUCCESS) { + printf("Cannot set RX frequency %f MHz\n",device->openair0_cfg[0].rx_freq[0]/1e6); + exit(-1); + } + else { + printf("Set RX frequency %f MHz\n",device->openair0_cfg[0].rx_freq[0]/1e6); + } + + // Run calibration procedure + // calibrate_rf(device); + //lms7->CalibrateTx(5.0); + LMS_RxStart(); + } + else + { + return(-1); + } + + //connect control port + + /* comport = LMS_GetCOMPort(); + LMS_UpdateDeviceList(comport); + name = LMS_GetDeviceName(comport, 0); + if (*name == 0) + comport = usbport; //attempt to use data port + else + { + printf("Connecting to device: %s\n",name); + if (LMS_DeviceOpen(comport, 0)!=0) + return (-1); + } + lms7 = new LMS7002M(comport); + if( access( "./config.ini", F_OK ) != -1 ) //load config file + lms7->LoadConfig("./config.ini"); + //calibration takes too long + //lms7->CalibrateRx(5.0); + //lms7->CalibrateTx(5.0); + */ + + return 0; +} + + +int trx_lms_stop(int card) { + /* + LMS_DeviceClose(usbport); + LMS_DeviceClose(comport); + delete lms7; + return LMS_Destroy(); + */ +} + +int trx_lms_set_freq(openair0_device* device, openair0_config_t *openair0_cfg,int exmimo_dump_config) { + //Control port must be connected + + lms7->SetFrequencySX(LMS7002M::Tx,openair0_cfg->tx_freq[0]/1e6,30.72); + lms7->SetFrequencySX(LMS7002M::Rx,openair0_cfg->rx_freq[0]/1e6,30.72); + printf ("[LMS] rx frequency:%f;\n",openair0_cfg->rx_freq[0]/1e6); + set_rx_gain_offset(openair0_cfg,0); + return(0); + +} + +// 31 = 19 dB => 105 dB total gain @ 2.6 GHz +rx_gain_calib_table_t calib_table_sodera[] = { + {3500000000.0,70.0}, + {2660000000.0,80.0}, + {2300000000.0,80.0}, + {1880000000.0,80.0}, + {816000000.0,80.0}, + {-1,0}}; + + + + + +int trx_lms_set_gains(openair0_device* device, openair0_config_t *openair0_cfg) { + + double gv = openair0_cfg[0].rx_gain[0] - openair0_cfg[0].rx_gain_offset[0]; + + if (gv > 31) { + printf("RX Gain 0 too high, reduce by %f dB\n",gv-31); + gv = 31; + } + if (gv < 0) { + printf("RX Gain 0 too low, increase by %f dB\n",-gv); + gv = 0; + } + printf("[LMS] Setting 7002M G_PGA_RBB to %d\n", (int16_t)gv); + lms7->Modify_SPI_Reg_bits(LMS7param(G_PGA_RBB),(int16_t)gv); + + return(0); +} + + +int trx_lms_get_stats(openair0_device* device) { + + return(0); + +} + +int trx_lms_reset_stats(openair0_device* device) { + + return(0); + +} + +int openair0_set_gains(openair0_device* device, + openair0_config_t *openair0_cfg) { + + return(0); +} + +int openair0_set_frequencies(openair0_device* device, openair0_config_t *openair0_cfg, int dummy) { + + return(0); +} + + + +void trx_lms_end(openair0_device *device) { + + +} + + +int openair0_dev_init_lms(openair0_device *device, openair0_config_t *openair0_cfg){ + + + printf("LMSSDR: Initializing openair0_device for %s ...\n", ((device->func_type == BBU_FUNC) ? "BBU": "RRH")); + + switch ((int)openair0_cfg[0].sample_rate) { + case 30720000: + // from usrp_time_offset + openair0_cfg[0].samples_per_packet = 2048; + openair0_cfg[0].tx_sample_advance = 15; + openair0_cfg[0].tx_bw = 30.72e6; + openair0_cfg[0].rx_bw = 30.72e6; + openair0_cfg[0].tx_scheduling_advance = 8*openair0_cfg[0].samples_per_packet; + break; + case 15360000: + openair0_cfg[0].samples_per_packet = 2048; + openair0_cfg[0].tx_sample_advance = 45; + openair0_cfg[0].tx_bw = 15.36e6; + openair0_cfg[0].rx_bw = 15.36e6; + openair0_cfg[0].tx_scheduling_advance = 5*openair0_cfg[0].samples_per_packet; + break; + case 7680000: + openair0_cfg[0].samples_per_packet = 1024; + openair0_cfg[0].tx_sample_advance = 70; + openair0_cfg[0].tx_bw = 7.68e6; + openair0_cfg[0].rx_bw = 7.68e6; + openair0_cfg[0].tx_scheduling_advance = 12*openair0_cfg[0].samples_per_packet; + break; + case 1920000: + openair0_cfg[0].samples_per_packet = 256; + openair0_cfg[0].tx_sample_advance = 50; + openair0_cfg[0].tx_bw = 1.25e6; + openair0_cfg[0].rx_bw = 1.25e6; + openair0_cfg[0].tx_scheduling_advance = 8*openair0_cfg[0].samples_per_packet; + break; + default: + printf("Error: unknown sampling rate %f\n",openair0_cfg[0].sample_rate); + exit(-1); + break; + } + + openair0_cfg[0].rx_gain_calib_table = calib_table_sodera; + set_rx_gain_offset(openair0_cfg,0); + + device->Mod_id = 1; + device->trx_start_func = trx_lms_start; + device->trx_write_func = trx_lms_write; + device->trx_read_func = trx_lms_read; + device->trx_get_stats_func = trx_lms_get_stats; + device->trx_reset_stats_func = trx_lms_reset_stats; + device->trx_end_func = trx_lms_end; + device->trx_stop_func = trx_lms_stop; + device->trx_set_freq_func = trx_lms_set_freq; + device->trx_set_gains_func = trx_lms_set_gains; + + device->openair0_cfg = openair0_cfg; + + return 0; +} From 92987e4c9b4a00fd0a0026a56511b3aa98c4a30b Mon Sep 17 00:00:00 2001 From: kaltenbe Date: Sun, 14 Feb 2016 20:31:38 +0100 Subject: [PATCH 19/55] small modifications in lms_lib.cpp added configuration file for lowband of SoDeRa --- openair1/PHY/TOOLS/lte_phy_scope.c | 4 +- targets/ARCH/LMSSDR/USERSPACE/LIB/lms_lib.cpp | 49 +- ...enb_sodera_highband_5MHz_rx19dB_txfull.ini | 1128 +++++++++++++++++ ...sodera_lowband_Wrx_5MHz_rx19dB_txfull.ini} | 100 +- .../CONF/enb.band7.tm1.50PRB.usrpb210.conf | 4 +- 5 files changed, 1211 insertions(+), 74 deletions(-) create mode 100644 targets/ARCH/LMSSDR/enb_sodera_highband_5MHz_rx19dB_txfull.ini rename targets/ARCH/LMSSDR/{SoDeRa_MIMO.ini => enb_sodera_lowband_Wrx_5MHz_rx19dB_txfull.ini} (95%) mode change 100755 => 100644 diff --git a/openair1/PHY/TOOLS/lte_phy_scope.c b/openair1/PHY/TOOLS/lte_phy_scope.c index e507024c86..843a77fe62 100644 --- a/openair1/PHY/TOOLS/lte_phy_scope.c +++ b/openair1/PHY/TOOLS/lte_phy_scope.c @@ -88,7 +88,7 @@ FD_lte_phy_scope_enb *create_lte_phy_scope_enb( void ) fl_set_object_boxtype( fdui->rxsig_t, FL_EMBOSSED_BOX ); fl_set_object_color( fdui->rxsig_t, FL_BLACK, FL_RED ); fl_set_object_lcolor( fdui->rxsig_t, FL_WHITE ); // Label color - fl_set_xyplot_ybounds(fdui->rxsig_t,30,70); + fl_set_xyplot_ybounds(fdui->rxsig_t,10,70); // Time-domain channel response fdui->chest_t = fl_add_xyplot( FL_NORMAL_XYPLOT, 410, 20, 370, 100, "Channel Impulse Response (samples, abs)" ); @@ -396,7 +396,7 @@ FD_lte_phy_scope_ue *create_lte_phy_scope_ue( void ) fl_set_object_boxtype( fdui->rxsig_t, FL_EMBOSSED_BOX ); fl_set_object_color( fdui->rxsig_t, FL_BLACK, FL_RED ); fl_set_object_lcolor( fdui->rxsig_t, FL_WHITE ); // Label color - fl_set_xyplot_ybounds(fdui->rxsig_t,30,70); + fl_set_xyplot_ybounds(fdui->rxsig_t,10,70); // Time-domain channel response fdui->chest_t = fl_add_xyplot( FL_NORMAL_XYPLOT, 410, 20, 370, 100, "Channel Impulse Response (samples, abs)" ); diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lms_lib.cpp b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms_lib.cpp index 8c85863e80..2402027506 100644 --- a/targets/ARCH/LMSSDR/USERSPACE/LIB/lms_lib.cpp +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms_lib.cpp @@ -571,6 +571,24 @@ void calibrate_rf(openair0_device *device) { } */ +int trx_lms_set_gains(openair0_device* device, openair0_config_t *openair0_cfg) { + + double gv = openair0_cfg[0].rx_gain[0] - openair0_cfg[0].rx_gain_offset[0]; + + if (gv > 31) { + printf("RX Gain 0 too high, reduce by %f dB\n",gv-31); + gv = 31; + } + if (gv < 0) { + printf("RX Gain 0 too low, increase by %f dB\n",-gv); + gv = 0; + } + printf("[LMS] Setting 7002M G_PGA_RBB to %d\n", (int16_t)gv); + lms7->Modify_SPI_Reg_bits(LMS7param(G_PGA_RBB),(int16_t)gv); + + return(0); +} + int trx_lms_start(openair0_device *device){ @@ -637,7 +655,14 @@ int trx_lms_start(openair0_device *device){ opStatus = lms7->TuneRxFilter(LMS7002M::RxFilter::RX_LPF_LOWBAND,5.0); if (opStatus != LIBLMS7_SUCCESS) { - printf("Warning: Could not tune TX filter\n"); + printf("Warning: Could not tune RX filter\n"); + } + + printf("Tuning TIA filter\n"); + opStatus = lms7->TuneRxFilter(LMS7002M::RxFilter::RX_TIA,7.0); + + if (opStatus != LIBLMS7_SUCCESS) { + printf("Warning: Could not tune RX TIA filter\n"); } opStatus = lms7->SetInterfaceFrequency(lms7->GetFrequencyCGEN_MHz(), @@ -683,6 +708,7 @@ int trx_lms_start(openair0_device *device){ printf("Set RX frequency %f MHz\n",device->openair0_cfg[0].rx_freq[0]/1e6); } + trx_lms_set_gains(device, device->openair0_cfg); // Run calibration procedure // calibrate_rf(device); //lms7->CalibrateTx(5.0); @@ -743,31 +769,14 @@ rx_gain_calib_table_t calib_table_sodera[] = { {3500000000.0,70.0}, {2660000000.0,80.0}, {2300000000.0,80.0}, - {1880000000.0,80.0}, - {816000000.0,80.0}, + {1880000000.0,74.0}, // on W PAD + {816000000.0,76.0}, // on W PAD {-1,0}}; -int trx_lms_set_gains(openair0_device* device, openair0_config_t *openair0_cfg) { - - double gv = openair0_cfg[0].rx_gain[0] - openair0_cfg[0].rx_gain_offset[0]; - - if (gv > 31) { - printf("RX Gain 0 too high, reduce by %f dB\n",gv-31); - gv = 31; - } - if (gv < 0) { - printf("RX Gain 0 too low, increase by %f dB\n",-gv); - gv = 0; - } - printf("[LMS] Setting 7002M G_PGA_RBB to %d\n", (int16_t)gv); - lms7->Modify_SPI_Reg_bits(LMS7param(G_PGA_RBB),(int16_t)gv); - - return(0); -} int trx_lms_get_stats(openair0_device* device) { diff --git a/targets/ARCH/LMSSDR/enb_sodera_highband_5MHz_rx19dB_txfull.ini b/targets/ARCH/LMSSDR/enb_sodera_highband_5MHz_rx19dB_txfull.ini new file mode 100644 index 0000000000..a3c1aa2e6f --- /dev/null +++ b/targets/ARCH/LMSSDR/enb_sodera_highband_5MHz_rx19dB_txfull.ini @@ -0,0 +1,1128 @@ +[reference_clocks] +sxr_ref_clk_mhz=30.72 +sxt_ref_clk_mhz=30.72 +[lms7002_registers_b] +0x03A0=0x0000 +0x054E=0x0000 +0x02D0=0x0000 +0x0386=0x0000 +0x054F=0x0000 +0x0389=0x0000 +0x040F=0x0000 +0x04E3=0x0000 +0x0385=0x0000 +0x0315=0x0000 +0x0384=0x0000 +0x0382=0x0000 +0x0288=0x0000 +0x0381=0x0000 +0x0366=0x0000 +0x0365=0x0000 +0x0364=0x0000 +0x0325=0x0000 +0x035E=0x0000 +0x035D=0x0000 +0x0442=0x0000 +0x0452=0x0000 +0x0299=0x0000 +0x0359=0x0000 +0x029D=0x0000 +0x04A3=0x0000 +0x040E=0x0000 +0x0316=0x0000 +0x030D=0x0000 +0x0356=0x0000 +0x0348=0x0000 +0x0498=0x0000 +0x0490=0x0000 +0x02CD=0x0000 +0x050D=0x0000 +0x0353=0x0000 +0x0351=0x0000 +0x048F=0x0000 +0x0445=0x0000 +0x0350=0x0000 +0x03A6=0x0000 +0x0293=0x0000 +0x034E=0x0000 +0x035C=0x0000 +0x034D=0x0000 +0x034B=0x0000 +0x011A=0x2E02 +0x0455=0x0000 +0x034A=0x0000 +0x035B=0x0000 +0x0505=0x0000 +0x0345=0x0000 +0x035F=0x0000 +0x0597=0x0000 +0x0586=0x0000 +0x0484=0x0000 +0x02C8=0x0000 +0x035A=0x0000 +0x0561=0x0000 +0x0344=0x0000 +0x0343=0x0000 +0x0342=0x0000 +0x0380=0x0000 +0x0327=0x0000 +0x025E=0x0000 +0x04DA=0x0000 +0x04C2=0x0000 +0x028C=0x0000 +0x0352=0x0000 +0x059C=0x0000 +0x04DD=0x0000 +0x028A=0x0000 +0x0289=0x0000 +0x031A=0x0000 +0x0363=0x0000 +0x0396=0x0000 +0x0284=0x0000 +0x010C=0x88FD +0x044C=0x0000 +0x0355=0x0000 +0x025C=0x0000 +0x0515=0x0000 +0x0361=0x0000 +0x0205=0x0000 +0x025B=0x0000 +0x04C5=0x0000 +0x04E2=0x0000 +0x025A=0x0000 +0x0256=0x0000 +0x0240=0x0020 +0x0367=0x0000 +0x05A3=0x0000 +0x0502=0x0000 +0x0258=0x0000 +0x0255=0x0000 +0x040C=0x0000 +0x028B=0x0000 +0x0253=0x0000 +0x024E=0x0000 +0x0346=0x0000 +0x0280=0x0000 +0x0285=0x0000 +0x024A=0x0000 +0x0261=0x0000 +0x0249=0x0000 +0x04CD=0x0000 +0x040A=0x0000 +0x0556=0x0000 +0x0243=0x0000 +0x051D=0x0000 +0x0494=0x0000 +0x024C=0x0000 +0x02DC=0x0000 +0x038F=0x0000 +0x0241=0x0000 +0x0488=0x0000 +0x0251=0x0000 +0x020B=0x4000 +0x0108=0x9442 +0x04A0=0x0000 +0x0116=0x8180 +0x02CC=0x0000 +0x039A=0x0000 +0x0112=0xC0E6 +0x0307=0x0000 +0x038C=0x0000 +0x0282=0x0000 +0x0321=0x0000 +0x0507=0x0000 +0x0483=0x0000 +0x0201=0x07FF +0x02E1=0x0000 +0x0517=0x0000 +0x0481=0x0000 +0x02D5=0x0000 +0x0259=0x0000 +0x0527=0x0000 +0x02DD=0x0000 +0x0209=0x0000 +0x0297=0x0000 +0x0400=0x0081 +0x0104=0x0088 +0x0103=0x0A12 +0x0347=0x0000 +0x02D8=0x0000 +0x0457=0x0000 +0x0306=0x0000 +0x02D1=0x0000 +0x04C8=0x0000 +0x0546=0x0000 +0x0440=0x0020 +0x045E=0x0000 +0x031D=0x0000 +0x039C=0x0000 +0x02D2=0x0000 +0x010E=0x2040 +0x02A0=0x0000 +0x0544=0x0000 +0x029C=0x0000 +0x055A=0x0000 +0x0295=0x0000 +0x02CF=0x0000 +0x04D1=0x0000 +0x0291=0x0000 +0x02DF=0x0000 +0x0290=0x0000 +0x020A=0x0080 +0x0102=0x3180 +0x0120=0xB9FF +0x0388=0x0000 +0x0318=0x0000 +0x02A7=0x0000 +0x0200=0x0081 +0x0594=0x0000 +0x02C5=0x0000 +0x028D=0x0000 +0x02A1=0x0000 +0x0362=0x0000 +0x038A=0x0000 +0x0395=0x0000 +0x058D=0x0000 +0x02D7=0x0000 +0x0305=0x0000 +0x0393=0x0000 +0x0398=0x0000 +0x0408=0x0000 +0x039B=0x0000 +0x049E=0x0000 +0x02DB=0x0000 +0x0357=0x0000 +0x02C2=0x0000 +0x0514=0x0000 +0x051C=0x0000 +0x03A2=0x0000 +0x03A4=0x0000 +0x03A3=0x0000 +0x0493=0x0000 +0x0454=0x0000 +0x0448=0x0000 +0x0397=0x0000 +0x02E3=0x0000 +0x049C=0x0000 +0x040D=0x0000 +0x0281=0x0000 +0x048C=0x0000 +0x049A=0x0000 +0x0119=0x18CB +0x010F=0x3042 +0x02A6=0x0000 +0x0257=0x0000 +0x04D6=0x0000 +0x04A6=0x0000 +0x0324=0x0000 +0x038E=0x0000 +0x02E7=0x0000 +0x034F=0x0000 +0x04E0=0x0000 +0x0123=0x267B +0x0497=0x0000 +0x0459=0x0000 +0x0394=0x0000 +0x04A5=0x0000 +0x04D9=0x0000 +0x0304=0x0000 +0x04D5=0x0000 +0x0508=0x0000 +0x0443=0x0000 +0x0301=0x0000 +0x0548=0x0000 +0x04D2=0x0000 +0x0592=0x0000 +0x0591=0x0000 +0x04C7=0x0000 +0x049D=0x0000 +0x029A=0x0000 +0x051F=0x0000 +0x0309=0x0000 +0x0585=0x0000 +0x03A5=0x0000 +0x02D3=0x0000 +0x0451=0x0000 +0x0390=0x0000 +0x0562=0x0000 +0x02C4=0x0000 +0x029E=0x0000 +0x031E=0x0000 +0x04C0=0x0000 +0x04DC=0x0000 +0x04DE=0x0000 +0x058B=0x0000 +0x04DB=0x0000 +0x04D0=0x0000 +0x0492=0x0000 +0x04A1=0x0000 +0x054B=0x0000 +0x02C7=0x0000 +0x05A0=0x0000 +0x044B=0x0000 +0x0100=0x3409 +0x04CA=0x0000 +0x0446=0x0000 +0x02E4=0x0000 +0x04E4=0x0000 +0x04C3=0x0000 +0x0496=0x0000 +0x04CF=0x0000 +0x025F=0x0000 +0x04D4=0x0000 +0x0504=0x0000 +0x04CE=0x0000 +0x02DE=0x0000 +0x0399=0x0000 +0x050C=0x0000 +0x02A5=0x0000 +0x04CC=0x0000 +0x03A1=0x0000 +0x04E1=0x0000 +0x02A2=0x0000 +0x040B=0x7FFF +0x0283=0x0000 +0x048E=0x0000 +0x0580=0x0000 +0x0409=0x0000 +0x039F=0x0000 +0x0248=0x0000 +0x048B=0x0000 +0x0358=0x0000 +0x0589=0x0000 +0x038D=0x0000 +0x0487=0x0000 +0x0510=0x0000 +0x0302=0x0000 +0x0486=0x0000 +0x045F=0x0000 +0x0480=0x0000 +0x0567=0x0000 +0x02DA=0x0000 +0x045A=0x0000 +0x0254=0x0000 +0x0405=0x0000 +0x0387=0x0000 +0x0458=0x0000 +0x0314=0x0000 +0x0360=0x0000 +0x0559=0x0000 +0x0456=0x0000 +0x0453=0x0000 +0x02E2=0x0000 +0x044D=0x0000 +0x0441=0x0000 +0x02C3=0x0000 +0x04C1=0x0000 +0x04D3=0x0000 +0x0444=0x0000 +0x0207=0x0000 +0x04C6=0x0000 +0x0296=0x0000 +0x0555=0x0000 +0x0349=0x0000 +0x0109=0x61C1 +0x04A2=0x0000 +0x0447=0x0000 +0x0460=0x0000 +0x048D=0x0000 +0x059A=0x0000 +0x0407=0x0000 +0x02C0=0x0000 +0x0499=0x0000 +0x0543=0x0000 +0x04C9=0x0000 +0x02CA=0x0000 +0x0404=0x0000 +0x0560=0x0000 +0x02C1=0x0000 +0x04D8=0x0000 +0x0403=0x0000 +0x0491=0x0000 +0x029B=0x0000 +0x04C4=0x0000 +0x010D=0x009E +0x0402=0x07FF +0x055E=0x0000 +0x03A7=0x0000 +0x0520=0x0000 +0x0392=0x0000 +0x030B=0x0000 +0x0588=0x0000 +0x0308=0x0000 +0x048A=0x0000 +0x044A=0x0000 +0x04A4=0x0000 +0x0300=0x0000 +0x0587=0x0000 +0x044E=0x0000 +0x055B=0x0000 +0x02E5=0x0000 +0x0114=0x008D +0x0323=0x0000 +0x0320=0x0000 +0x0503=0x0000 +0x0513=0x0000 +0x0319=0x0000 +0x0260=0x0000 +0x0549=0x0000 +0x0552=0x0000 +0x0509=0x0000 +0x0521=0x0000 +0x0286=0x0000 +0x04D7=0x0000 +0x059E=0x0000 +0x058F=0x0000 +0x0557=0x0000 +0x0322=0x0000 +0x059B=0x0000 +0x049F=0x0000 +0x0522=0x0000 +0x0545=0x0000 +0x0551=0x0000 +0x0312=0x0000 +0x055D=0x0000 +0x0298=0x0000 +0x055F=0x0000 +0x011D=0xAAAA +0x039E=0x0000 +0x0547=0x0000 +0x0598=0x0000 +0x0449=0x0000 +0x0564=0x0000 +0x0242=0x0000 +0x0525=0x0000 +0x0523=0x0000 +0x0565=0x0000 +0x0124=0x0000 +0x0563=0x0000 +0x024D=0x0000 +0x05A5=0x0000 +0x0566=0x0000 +0x030A=0x0000 +0x029F=0x0000 +0x054C=0x0000 +0x0582=0x0000 +0x0599=0x0000 +0x0511=0x0000 +0x0506=0x0000 +0x0595=0x0000 +0x0584=0x0000 +0x058C=0x0000 +0x05A6=0x0000 +0x051E=0x0000 +0x050F=0x0000 +0x0590=0x0000 +0x0596=0x0000 +0x05A7=0x0000 +0x058A=0x0000 +0x059D=0x0000 +0x0485=0x0000 +0x0581=0x0000 +0x045D=0x0000 +0x0245=0x0000 +0x0310=0x0000 +0x058E=0x0000 +0x05A2=0x0000 +0x054D=0x0000 +0x020C=0x7FFF +0x031F=0x0000 +0x0292=0x0000 +0x059F=0x0000 +0x0583=0x0000 +0x0317=0x0000 +0x0244=0x0000 +0x0554=0x0000 +0x0593=0x0000 +0x05A4=0x0000 +0x02A3=0x0000 +0x0553=0x0000 +0x0542=0x0000 +0x0519=0x0000 +0x024F=0x0000 +0x0524=0x0000 +0x0518=0x0000 +0x0354=0x0000 +0x0526=0x0000 +0x031B=0x0000 +0x050E=0x0000 +0x0516=0x0000 +0x02CB=0x0000 +0x0250=0x0000 +0x031C=0x0000 +0x028F=0x0000 +0x051A=0x0000 +0x055C=0x0000 +0x050A=0x0000 +0x050B=0x0000 +0x04E7=0x0000 +0x04E6=0x0000 +0x04E5=0x0000 +0x0512=0x0000 +0x0206=0x0000 +0x0550=0x0000 +0x030E=0x0000 +0x0203=0x0000 +0x0482=0x0000 +0x0541=0x0000 +0x0122=0x033F +0x0110=0x0BF4 +0x0204=0x0000 +0x0252=0x0000 +0x011E=0x0AA7 +0x049B=0x0000 +0x0294=0x0000 +0x011C=0xA941 +0x02D6=0x0000 +0x0311=0x0000 +0x0117=0x280C +0x02A4=0x0000 +0x0540=0x0000 +0x02E0=0x0000 +0x0118=0x018C +0x0489=0x0000 +0x04A7=0x0000 +0x0101=0x7800 +0x0558=0x0000 +0x02C6=0x0000 +0x05A1=0x0000 +0x02C9=0x0000 +0x039D=0x0000 +0x0500=0x0000 +0x0450=0x0000 +0x011F=0x3600 +0x030C=0x0000 +0x04DF=0x0000 +0x0106=0x3182 +0x028E=0x0000 +0x0326=0x0000 +0x0113=0x03C3 +0x04CB=0x0000 +0x0391=0x0000 +0x0105=0x0007 +0x02D9=0x0000 +0x02CE=0x0000 +0x044F=0x0000 +0x038B=0x0000 +0x02D4=0x0000 +0x0107=0x318C +0x0495=0x0000 +0x0246=0x0000 +0x0303=0x0000 +0x02E6=0x0000 +0x045B=0x0000 +0x0340=0x0000 +0x0208=0x0070 +0x0111=0x0083 +0x0247=0x0000 +0x024B=0x0000 +0x045C=0x0000 +0x0383=0x0000 +0x0202=0x07FF +0x054A=0x0000 +0x0401=0x07FF +0x0341=0x0000 +0x0287=0x0000 +0x034C=0x0000 +0x0501=0x0000 +0x030F=0x0000 +0x025D=0x0000 +0x0406=0x0000 +0x0313=0x0000 +0x010A=0x104C +0x0461=0x0000 +0x051B=0x0000 +0x0121=0x31FA +0x0115=0x0009 +[lms7002_registers_a] +0x0107=0x318C +0x02D4=0x0000 +0x0082=0x8001 +0x0209=0x0000 +0x02CA=0x0000 +0x04C9=0x0000 +0x0120=0xB9FF +0x0388=0x0000 +0x029D=0x0000 +0x04A3=0x0000 +0x0208=0x0170 +0x0340=0x0000 +0x0094=0x0000 +0x0244=0x0000 +0x0317=0x0000 +0x00A9=0x8000 +0x0115=0x0009 +0x039A=0x0000 +0x0112=0x3171 +0x048C=0x0000 +0x0023=0x5550 +0x0587=0x1D10 +0x04C0=0x0000 +0x031E=0x0000 +0x0205=0x0000 +0x0361=0x0000 +0x051F=0xAB08 +0x029A=0x0000 +0x0396=0x0000 +0x0284=0x0000 +0x02CE=0x0000 +0x02D9=0x0000 +0x038B=0x0000 +0x044F=0x0000 +0x0367=0x0000 +0x0240=0x0028 +0x05A3=0x0000 +0x0105=0x0007 +0x009B=0x6565 +0x0400=0x0101 +0x02DB=0x0000 +0x0357=0x0000 +0x0104=0x0088 +0x0103=0x0612 +0x0457=0x0000 +0x0347=0x0000 +0x02D8=0x0000 +0x010C=0x8865 +0x0086=0x4101 +0x0202=0x0794 +0x0383=0x0000 +0x020B=0x4000 +0x0108=0xFC26 +0x0098=0x0000 +0x0117=0x100C +0x0027=0x05E4 +0x00A7=0x6565 +0x024A=0x0000 +0x0029=0x0101 +0x00AD=0x03FF +0x0540=0x5009 +0x02A4=0x0000 +0x02DE=0x0000 +0x002E=0x0000 +0x0261=0x0000 +0x00AB=0x0040 +0x0564=0x0000 +0x00A8=0x0000 +0x0517=0xC89D +0x0481=0x0000 +0x02C1=0x0000 +0x0301=0x0000 +0x00A5=0x6565 +0x0515=0x2E45 +0x025C=0x0000 +0x009F=0x658C +0x0519=0x4049 +0x054B=0xF7A3 +0x02C7=0x0000 +0x038C=0x0000 +0x0307=0x0000 +0x0282=0x0000 +0x0289=0x0000 +0x011C=0xA941 +0x0562=0xF524 +0x0025=0x0101 +0x02CC=0x0000 +0x0116=0x8180 +0x0597=0xFDFB +0x035F=0x0000 +0x002F=0x3840 +0x0589=0xEA5F +0x00A2=0x6565 +0x0099=0x6565 +0x0310=0x0000 +0x040C=0x40F8 +0x028B=0x0000 +0x0253=0x0000 +0x00AC=0x2000 +0x002D=0xFFFF +0x00A6=0x0001 +0x054D=0xF7A3 +0x002C=0x0000 +0x0249=0x0000 +0x04CD=0x0000 +0x0401=0x07FF +0x00A4=0x6565 +0x054A=0x8184 +0x038F=0x0000 +0x008C=0x267B +0x0241=0x0000 +0x0356=0x0000 +0x00A1=0x6565 +0x0260=0x0000 +0x0453=0x0000 +0x008A=0x0491 +0x048F=0x0000 +0x0445=0x0000 +0x0350=0x0000 +0x00AA=0x0000 +0x034C=0x0000 +0x0501=0xFDFB +0x0490=0x0000 +0x02CD=0x0000 +0x050D=0x0F45 +0x0353=0x0000 +0x0024=0x50D8 +0x04E5=0x0000 +0x0512=0x196B +0x0247=0x0000 +0x045C=0x0000 +0x024B=0x0000 +0x0395=0x0000 +0x011F=0x3600 +0x039D=0x0000 +0x0500=0xF61D +0x02C9=0x0000 +0x05A1=0x0000 +0x02A6=0x0000 +0x0119=0x18DF +0x010F=0x3042 +0x04CB=0x0000 +0x0391=0x0000 +0x0113=0x03C3 +0x0326=0x0000 +0x028E=0x0000 +0x0106=0x3182 +0x0524=0x3347 +0x009D=0x6565 +0x0294=0x0000 +0x0026=0x0101 +0x0110=0x0BFF +0x0122=0x033F +0x0381=0x0000 +0x009C=0x658C +0x05A0=0x0000 +0x0482=0x0000 +0x030E=0x0000 +0x0203=0x2F99 +0x0095=0x0000 +0x0111=0x0099 +0x0256=0x0000 +0x0089=0x00A0 +0x0085=0x0001 +0x0088=0x0530 +0x0459=0x0000 +0x0394=0x0000 +0x010E=0x0285 +0x02A0=0x0000 +0x002B=0x4038 +0x039C=0x0000 +0x02D2=0x0000 +0x0581=0xC89D +0x045D=0x0000 +0x0245=0x0000 +0x002A=0x0086 +0x0118=0x018C +0x02E0=0x0000 +0x0489=0x0000 +0x04A7=0x0000 +0x039E=0x0000 +0x011D=0xAAAA +0x02E1=0x0000 +0x0259=0x0000 +0x02D5=0x0000 +0x051D=0x4F91 +0x0243=0x0000 +0x0556=0xA2B5 +0x040A=0x1000 +0x05A2=0x0000 +0x020C=0x8000 +0x020A=0x0080 +0x0102=0x3180 +0x034F=0x0000 +0x0303=0x0000 +0x0306=0x0000 +0x0255=0x0000 +0x0300=0x0000 +0x044E=0x0000 +0x0309=0x0000 +0x0585=0xDAA2 +0x0527=0xACB9 +0x044A=0x0000 +0x04A4=0x0000 +0x048A=0x0000 +0x0392=0x0000 +0x030B=0x0000 +0x05A7=0x0000 +0x0252=0x0000 +0x0204=0xC016 +0x0308=0x0000 +0x0588=0xE6C7 +0x0321=0x0000 +0x0507=0xFCFE +0x0312=0x0000 +0x050B=0xF5EF +0x0360=0x0000 +0x0021=0x0E9F +0x04C2=0x0000 +0x030D=0x0000 +0x040E=0x0003 +0x0316=0x0000 +0x031F=0x0000 +0x030C=0x0000 +0x04DF=0x0000 +0x0318=0x0000 +0x0250=0x0000 +0x02CB=0x0000 +0x045E=0x0000 +0x0440=0x0024 +0x031D=0x0000 +0x058D=0xF5EF +0x02D7=0x0000 +0x0380=0x0000 +0x0342=0x0000 +0x0343=0x0000 +0x0566=0x0906 +0x0345=0x0000 +0x049C=0x0000 +0x02E3=0x0000 +0x0397=0x0000 +0x035B=0x0000 +0x0505=0x00D8 +0x028D=0x0000 +0x02A1=0x0000 +0x028F=0x0000 +0x031C=0x0000 +0x031A=0x0000 +0x0363=0x0000 +0x0596=0x0A94 +0x0354=0x0000 +0x0518=0xEFF2 +0x035C=0x0000 +0x034D=0x0000 +0x0344=0x0000 +0x0561=0xAB08 +0x0096=0x0000 +0x010D=0x00DE +0x04C4=0x0000 +0x0351=0x0000 +0x0311=0x0000 +0x02D6=0x0000 +0x02D1=0x0000 +0x0546=0x8D44 +0x04C8=0x0000 +0x048B=0x0000 +0x0358=0x0000 +0x0522=0xDB10 +0x049F=0x0000 +0x034A=0x0000 +0x0455=0x0000 +0x0359=0x0000 +0x03A4=0x0000 +0x03A3=0x0000 +0x0341=0x0000 +0x0287=0x0000 +0x04DA=0x0000 +0x025E=0x0000 +0x0580=0xEFF2 +0x0409=0x0000 +0x059A=0x0000 +0x048D=0x0000 +0x0514=0xE7E2 +0x039B=0x0000 +0x0101=0x7800 +0x0558=0x5009 +0x02C6=0x0000 +0x051B=0xB77F +0x0313=0x0000 +0x010A=0x104C +0x0461=0x0000 +0x0406=0x0000 +0x030F=0x0000 +0x025D=0x0000 +0x034B=0x0000 +0x011A=0x2E14 +0x029F=0x0000 +0x030A=0x0000 +0x034E=0x0000 +0x0293=0x0000 +0x03A6=0x0000 +0x0560=0x174B +0x0404=0x0000 +0x00A0=0x6565 +0x0547=0xD7B7 +0x0454=0x0000 +0x0448=0x0000 +0x0327=0x0000 +0x0305=0x0000 +0x0393=0x0000 +0x0510=0xE6C7 +0x0302=0x0000 +0x0486=0x0000 +0x045F=0x0000 +0x0365=0x0000 +0x048E=0x0000 +0x0022=0x07FF +0x0283=0x0000 +0x044B=0x0000 +0x045A=0x0000 +0x02DA=0x0000 +0x04E4=0x0000 +0x02E4=0x0000 +0x03A5=0x0000 +0x040B=0x000F +0x0366=0x0000 +0x0443=0x0000 +0x0508=0xEF99 +0x00A3=0x6565 +0x02E2=0x0000 +0x044D=0x0000 +0x0314=0x0000 +0x0458=0x0000 +0x0493=0x0000 +0x0346=0x0000 +0x024E=0x0000 +0x055E=0xDB10 +0x0402=0x07D9 +0x0384=0x0000 +0x02E6=0x0000 +0x045B=0x0000 +0x0480=0x0000 +0x0567=0x4049 +0x04CA=0x0000 +0x0446=0x0000 +0x0447=0x0000 +0x0460=0x0000 +0x0559=0xACB9 +0x0456=0x0000 +0x0441=0x0000 +0x0444=0x0000 +0x0390=0x0000 +0x0451=0x0000 +0x049E=0x0000 +0x0324=0x0000 +0x02E7=0x0000 +0x038E=0x0000 +0x0403=0x0013 +0x04D8=0x0000 +0x029B=0x0000 +0x0491=0x0000 +0x03A1=0x0000 +0x04E1=0x0000 +0x02A2=0x0000 +0x051C=0x0000 +0x03A2=0x0000 +0x0407=0x0000 +0x0258=0x0000 +0x0502=0x0A94 +0x038A=0x0000 +0x0362=0x0000 +0x028C=0x0000 +0x0352=0x0000 +0x0385=0x0000 +0x0315=0x0000 +0x040D=0x0000 +0x039F=0x0000 +0x0248=0x0000 +0x0405=0x0000 +0x0254=0x0000 +0x0398=0x0000 +0x0408=0x0000 +0x0487=0x0000 +0x038D=0x0000 +0x035E=0x0000 +0x03A7=0x0000 +0x0520=0x174B +0x0449=0x0000 +0x02C8=0x0000 +0x035A=0x0000 +0x0387=0x0000 +0x0386=0x0000 +0x0452=0x0000 +0x0299=0x0000 +0x0084=0x0400 +0x0498=0x0000 +0x0348=0x0000 +0x02D0=0x0000 +0x054E=0x8184 +0x03A0=0x0000 +0x009A=0x658C +0x055D=0xA6B5 +0x0298=0x0000 +0x0364=0x0000 +0x0081=0x0000 +0x0325=0x0000 +0x040F=0x43E4 +0x04E3=0x0000 +0x050E=0x17DC +0x0516=0x150F +0x0389=0x0000 +0x054F=0x18C9 +0x0304=0x0000 +0x04D5=0x0000 +0x059B=0x0000 +0x0322=0x0000 +0x0442=0x0000 +0x035D=0x0000 +0x0492=0x0000 +0x04A1=0x0000 +0x0382=0x0000 +0x0288=0x0000 +0x0296=0x0000 +0x0555=0xBD96 +0x0349=0x0000 +0x0484=0x0000 +0x0586=0x196B +0x0281=0x0000 +0x0200=0x0301 +0x0594=0xF40D +0x02C5=0x0000 +0x0319=0x0000 +0x0121=0x3760 +0x025B=0x0000 +0x0290=0x0000 +0x02DF=0x0000 +0x0291=0x0000 +0x029C=0x0000 +0x008B=0x278A +0x02A3=0x0000 +0x05A4=0x0000 +0x02A7=0x0000 +0x0483=0x0000 +0x0201=0x07FF +0x02C2=0x0000 +0x02C4=0x0000 +0x0207=0x0000 +0x04C6=0x0000 +0x0093=0x0000 +0x02D3=0x0000 +0x0494=0x0000 +0x04CF=0x0000 +0x025F=0x0000 +0x0251=0x0000 +0x0488=0x0000 +0x0496=0x0000 +0x04C3=0x0000 +0x0100=0x3409 +0x04CC=0x0000 +0x02A5=0x0000 +0x0257=0x0000 +0x04D6=0x0000 +0x04A6=0x0000 +0x049A=0x0000 +0x049B=0x0000 +0x0097=0x0000 +0x011E=0x0A2A +0x0285=0x0000 +0x0280=0x0000 +0x0020=0xFFFD +0x02DD=0x0000 +0x0297=0x0000 +0x044C=0x0000 +0x0355=0x0000 +0x04A0=0x0000 +0x02CF=0x0000 +0x04D1=0x0000 +0x0526=0xBE2A +0x0092=0x0001 +0x031B=0x0000 +0x0541=0x4C24 +0x0543=0xBD96 +0x02C0=0x0000 +0x0499=0x0000 +0x0513=0xDAA2 +0x0549=0x18C9 +0x0552=0x8D44 +0x0521=0x5852 +0x0509=0x0605 +0x0286=0x0000 +0x024F=0x0000 +0x04E0=0x0000 +0x0545=0x364E +0x0551=0xD7B7 +0x055F=0x5852 +0x009E=0x658C +0x0598=0xF61D +0x0123=0x067B +0x0497=0x0000 +0x04A5=0x0000 +0x0565=0xB77F +0x0124=0x0000 +0x0592=0x0DF1 +0x0591=0xFCFE +0x0548=0x79FA +0x04D2=0x0000 +0x0599=0x0000 +0x0511=0x1D10 +0x0506=0x0DF1 +0x0595=0x00BC +0x0584=0xE7E2 +0x0242=0x0000 +0x025A=0x0000 +0x04E2=0x0000 +0x04C5=0x0000 +0x058C=0xEA50 +0x0450=0x0000 +0x058A=0x17DC +0x059D=0x0000 +0x0485=0x0000 +0x058E=0x1316 +0x0550=0x79FA +0x0554=0x6901 +0x0593=0x00D8 +0x0553=0x364E +0x0542=0xA2B5 +0x0563=0x4F91 +0x024D=0x0000 +0x055A=0xBE2A +0x0295=0x0000 +0x028A=0x0000 +0x059C=0x0000 +0x04DD=0x0000 +0x054C=0x7FFF +0x0582=0x150F +0x0109=0x8CC1 +0x04A2=0x0000 +0x0292=0x0000 +0x0583=0x2E45 +0x059F=0x0000 +0x0525=0x57AC +0x0523=0xA6B5 +0x0206=0x0000 +0x051A=0x0906 +0x055C=0x3347 +0x05A6=0x0000 +0x050F=0xEA5F +0x051E=0xF524 +0x050A=0x1316 +0x04C7=0x0000 +0x049D=0x0000 +0x050C=0xEA50 +0x0087=0x0000 +0x0399=0x0000 +0x0495=0x0000 +0x0246=0x0000 +0x0503=0x00BC +0x0320=0x0000 +0x0323=0x0000 +0x055B=0x57AC +0x0114=0x0110 +0x02E5=0x0000 +0x04E7=0x0000 +0x04D0=0x0000 +0x04E6=0x0000 +0x00AE=0x0000 +0x0544=0x6901 +0x04DE=0x0000 +0x058B=0x0F45 +0x0028=0x0101 +0x029E=0x0000 +0x04DC=0x0000 +0x04D9=0x0000 +0x058F=0x0605 +0x0557=0x4C24 +0x04DB=0x0000 +0x04D7=0x0000 +0x059E=0x0000 +0x024C=0x0000 +0x02DC=0x0000 +0x04D4=0x0000 +0x0504=0xF40D +0x02C3=0x0000 +0x04C1=0x0000 +0x04D3=0x0000 +0x0590=0xEF99 +0x04CE=0x0000 +0x05A5=0x0000 +[file_info] +version=1 +type=lms7002m_minimal_config diff --git a/targets/ARCH/LMSSDR/SoDeRa_MIMO.ini b/targets/ARCH/LMSSDR/enb_sodera_lowband_Wrx_5MHz_rx19dB_txfull.ini old mode 100755 new mode 100644 similarity index 95% rename from targets/ARCH/LMSSDR/SoDeRa_MIMO.ini rename to targets/ARCH/LMSSDR/enb_sodera_lowband_Wrx_5MHz_rx19dB_txfull.ini index a3feaa269b..0243742f32 --- a/targets/ARCH/LMSSDR/SoDeRa_MIMO.ini +++ b/targets/ARCH/LMSSDR/enb_sodera_lowband_Wrx_5MHz_rx19dB_txfull.ini @@ -28,8 +28,8 @@ version=1 0x0454=0x0000 0x0446=0x0000 0x04CA=0x0000 -0x0444=0x02B1 -0x0443=0xCCCD +0x0444=0x0000 +0x0443=0x0000 0x0508=0xEF99 0x0441=0x0000 0x040D=0x0000 @@ -42,7 +42,7 @@ version=1 0x0404=0x0000 0x00A0=0x6565 0x0560=0x174B -0x0403=0x0000 +0x0403=0x009C 0x0402=0x07FF 0x055E=0xDB10 0x03A7=0x0000 @@ -92,7 +92,7 @@ version=1 0x038A=0x0000 0x035E=0x0000 0x035D=0x0000 -0x0442=0x0CCC +0x0442=0x0000 0x0449=0x0000 0x035A=0x0000 0x02C8=0x0000 @@ -109,7 +109,7 @@ version=1 0x035C=0x0000 0x034D=0x0000 0x034B=0x0000 -0x011A=0x2E02 +0x011A=0x2E03 0x0455=0x0000 0x034A=0x0000 0x0348=0x0000 @@ -130,7 +130,7 @@ version=1 0x059B=0x0000 0x0321=0x0000 0x045E=0x0000 -0x0440=0x0020 +0x0440=0x0024 0x031D=0x0000 0x0363=0x0000 0x031A=0x0000 @@ -148,7 +148,7 @@ version=1 0x0360=0x0000 0x0313=0x0000 0x0461=0x0000 -0x010A=0x104C +0x010A=0x184C 0x051B=0xB77F 0x0312=0x0000 0x0346=0x0000 @@ -188,27 +188,27 @@ version=1 0x0102=0x3180 0x020C=0x8000 0x05A2=0x0000 -0x040A=0x0003 +0x040A=0x1000 0x0556=0xA2B5 0x0243=0x0000 0x051D=0x4F91 0x0259=0x0000 0x02D5=0x0000 0x02E1=0x0000 -0x011D=0xB555 +0x011D=0xFEEE 0x039E=0x0000 0x0252=0x0000 -0x0204=0x0000 +0x0204=0xFFAD 0x0255=0x0000 0x0281=0x0000 -0x0200=0x0081 +0x0200=0x0301 0x0594=0xF40D 0x02C5=0x0000 0x0406=0x0000 0x030F=0x0000 0x025D=0x0000 0x0319=0x0000 -0x0121=0x323C +0x0121=0x313C 0x0101=0x7800 0x025B=0x0000 0x02C6=0x0000 @@ -222,7 +222,7 @@ version=1 0x029C=0x0000 0x028D=0x0000 0x02A1=0x0000 -0x008B=0x21A6 +0x008B=0x278A 0x02A3=0x0000 0x05A4=0x0000 0x02A7=0x0000 @@ -249,7 +249,7 @@ version=1 0x0488=0x0000 0x0496=0x0000 0x04C3=0x0000 -0x0100=0x7409 +0x0100=0xB409 0x04CC=0x0000 0x02A5=0x0000 0x0257=0x0000 @@ -258,7 +258,7 @@ version=1 0x049A=0x0000 0x049B=0x0000 0x0097=0x0000 -0x011E=0x068E +0x011E=0x0663 0x0285=0x0000 0x0280=0x0000 0x049E=0x0000 @@ -346,7 +346,7 @@ version=1 0x054C=0x7FFF 0x0582=0x150F 0x0585=0xDAA2 -0x0109=0x61C1 +0x0109=0x03C1 0x04A2=0x0000 0x0292=0x0000 0x059F=0x0000 @@ -371,7 +371,7 @@ version=1 0x0399=0x0000 0x050B=0xF5EF 0x0507=0xFCFE -0x010D=0x015B +0x010D=0x01DC 0x04C4=0x0000 0x0495=0x0000 0x0246=0x0000 @@ -380,7 +380,7 @@ version=1 0x0323=0x0000 0x02E5=0x0000 0x055B=0x57AC -0x0114=0x008D +0x0114=0x0170 0x04D8=0x0000 0x04E7=0x0000 0x04D0=0x0000 @@ -413,25 +413,25 @@ version=1 0x04A7=0x0000 0x0489=0x0000 0x02E0=0x0000 -0x0118=0x018C +0x0118=0x218C 0x002A=0x0086 0x0245=0x0000 0x045D=0x0000 0x0581=0xC89D 0x02D2=0x0000 0x039C=0x0000 -0x002B=0x0038 +0x002B=0x4032 0x02A0=0x0000 -0x010E=0x0000 +0x010E=0x070C 0x0394=0x0000 0x0459=0x0000 -0x0088=0x0550 +0x0088=0x0530 0x0085=0x0001 -0x0089=0x1150 +0x0089=0x00A0 0x0256=0x0000 -0x0111=0x0083 +0x0111=0x0099 0x0095=0x0000 -0x0203=0x0000 +0x0203=0x2F6C 0x030E=0x0000 0x0482=0x0000 0x05A0=0x0000 @@ -450,7 +450,7 @@ version=1 0x0391=0x0000 0x04CB=0x0000 0x010F=0x3042 -0x0119=0x18CB +0x0119=0x529F 0x02A6=0x0000 0x05A1=0x0000 0x02C9=0x0000 @@ -463,7 +463,7 @@ version=1 0x0247=0x0000 0x0512=0x196B 0x04E5=0x0000 -0x0024=0xE4E4 +0x0024=0x50D8 0x0353=0x0000 0x050D=0x0F45 0x02CD=0x0000 @@ -472,9 +472,9 @@ version=1 0x034C=0x0000 0x00AA=0x0000 0x0350=0x0000 -0x0445=0xDA02 +0x0445=0x0000 0x048F=0x0000 -0x008A=0x0514 +0x008A=0x0491 0x0453=0x0000 0x0260=0x0000 0x00A1=0x6565 @@ -484,17 +484,17 @@ version=1 0x038F=0x0000 0x054A=0x8184 0x00A4=0x6565 -0x0401=0x07FF +0x0401=0x07ED 0x04CD=0x0000 0x0249=0x0000 -0x002C=0x0000 +0x002C=0x0100 0x054D=0xF7A3 0x00A6=0x0001 0x002D=0xFFFF 0x00AC=0x2000 0x0253=0x0000 0x028B=0x0000 -0x040C=0x00FC +0x040C=0x40F8 0x0310=0x0000 0x0099=0x6565 0x00A2=0x6565 @@ -534,13 +534,13 @@ version=1 0x0029=0x0101 0x024A=0x0000 0x00A7=0x6565 -0x0027=0xB1E4 -0x0117=0x280C +0x0027=0x05E4 +0x0117=0x1939 0x0098=0x0000 -0x0108=0x3042 +0x0108=0xFC26 0x020B=0x0000 0x0383=0x0000 -0x0202=0x07FF +0x0202=0x07F9 0x0086=0x4101 0x010C=0x8865 0x02D8=0x0000 @@ -550,11 +550,11 @@ version=1 0x0104=0x0088 0x0357=0x0000 0x02DB=0x0000 -0x0400=0x0081 +0x0400=0x0101 0x009B=0x6565 0x0105=0x0007 0x05A3=0x0000 -0x0240=0x0020 +0x0240=0x0028 0x0367=0x0000 0x044F=0x0000 0x038B=0x0000 @@ -571,7 +571,7 @@ version=1 0x0587=0x1D10 0x0023=0x5550 0x048C=0x0000 -0x0112=0xC0E6 +0x0112=0x20E5 0x039A=0x0000 0x0115=0x0009 0x00A9=0x8000 @@ -715,7 +715,7 @@ version=1 0x038A=0x0000 0x0362=0x0000 0x0387=0x0000 -0x0200=0x0101 +0x0200=0x0081 0x0594=0x0000 0x02C5=0x0000 0x02A7=0x0000 @@ -732,7 +732,7 @@ version=1 0x0295=0x0000 0x055A=0x0000 0x029C=0x0000 -0x010E=0x2000 +0x010E=0x2040 0x02A0=0x0000 0x010F=0x3042 0x02A6=0x0000 @@ -765,7 +765,7 @@ version=1 0x0104=0x0088 0x0357=0x0000 0x02DB=0x0000 -0x0400=0x0101 +0x0400=0x0081 0x0209=0x0000 0x0297=0x0000 0x02DD=0x0000 @@ -798,7 +798,7 @@ version=1 0x044A=0x0000 0x04A4=0x0000 0x04C4=0x0000 -0x010D=0x019C +0x010D=0x009E 0x0300=0x0000 0x0587=0x0000 0x044E=0x0000 @@ -834,7 +834,7 @@ version=1 0x055D=0x0000 0x0298=0x0000 0x055F=0x0000 -0x011D=0x7555 +0x011D=0x699D 0x039E=0x0000 0x0547=0x0000 0x0598=0x0000 @@ -932,7 +932,7 @@ version=1 0x0110=0x0BF4 0x0204=0x0000 0x0252=0x0000 -0x011E=0x06EC +0x011E=0x06B9 0x049B=0x0000 0x0294=0x0000 0x011C=0xAD41 @@ -977,7 +977,7 @@ version=1 0x045B=0x0000 0x0100=0x3409 0x0340=0x0000 -0x0208=0x0170 +0x0208=0x0070 0x0111=0x0083 0x0247=0x0000 0x024B=0x0000 @@ -997,14 +997,14 @@ version=1 0x010A=0x104C 0x0461=0x0000 0x051B=0x0000 -0x0121=0x348C +0x0121=0x333C 0x0115=0x0009 0x0112=0xC0E6 0x039A=0x0000 0x02CC=0x0000 0x0116=0x8180 0x04A0=0x0000 -0x0108=0x3042 +0x0108=0x9442 0x020B=0x4000 0x0251=0x0000 0x0488=0x0000 @@ -1027,7 +1027,7 @@ version=1 0x024E=0x0000 0x0253=0x0000 0x028B=0x0000 -0x040C=0x00FC +0x040C=0x0000 0x0255=0x0000 0x0258=0x0000 0x0502=0x0000 @@ -1045,7 +1045,7 @@ version=1 0x025C=0x0000 0x0355=0x0000 0x044C=0x0000 -0x010C=0x8865 +0x010C=0x88FD 0x0284=0x0000 0x0396=0x0000 0x0363=0x0000 diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpb210.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpb210.conf index e94e7c79a9..2ce9598129 100644 --- a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpb210.conf +++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpb210.conf @@ -140,10 +140,10 @@ eNBs = NETWORK_INTERFACES : { ENB_INTERFACE_NAME_FOR_S1_MME = "eth0"; - ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.212/24"; + ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.215/24"; ENB_INTERFACE_NAME_FOR_S1U = "eth0"; - ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.212/24"; + ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.215/24"; ENB_PORT_FOR_S1U = 2152; # Spec 2152 }; From fdb71a0a13ace9fbae7d6df9de31868dae6c5f65 Mon Sep 17 00:00:00 2001 From: Rohit Gupta Date: Mon, 15 Feb 2016 19:20:15 +0100 Subject: [PATCH 20/55] fixes for Ethernet timing --- .../ETHERNET/USERSPACE/LIB/ethernet_lib.c | 22 +++++++++---------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/targets/ARCH/ETHERNET/USERSPACE/LIB/ethernet_lib.c b/targets/ARCH/ETHERNET/USERSPACE/LIB/ethernet_lib.c index 1582273d48..4fa522f21a 100644 --- a/targets/ARCH/ETHERNET/USERSPACE/LIB/ethernet_lib.c +++ b/targets/ARCH/ETHERNET/USERSPACE/LIB/ethernet_lib.c @@ -353,28 +353,28 @@ int transport_init(openair0_device *device, openair0_config_t *openair0_cfg, eth switch ((int)openair0_cfg[0].sample_rate) { case 30720000: openair0_cfg[0].samples_per_packet = 4096; - openair0_cfg[0].tx_sample_advance = 0; - openair0_cfg[0].tx_scheduling_advance = 22*openair0_cfg[0].samples_per_packet; + openair0_cfg[0].tx_sample_advance = 115; + openair0_cfg[0].tx_scheduling_advance = 11*openair0_cfg[0].samples_per_packet; break; case 23040000: openair0_cfg[0].samples_per_packet = 2048; - openair0_cfg[0].tx_sample_advance = 0; - openair0_cfg[0].tx_scheduling_advance = 16*openair0_cfg[0].samples_per_packet; + openair0_cfg[0].tx_sample_advance = 113; + openair0_cfg[0].tx_scheduling_advance = 8*openair0_cfg[0].samples_per_packet; break; case 15360000: openair0_cfg[0].samples_per_packet = 2048; - openair0_cfg[0].tx_sample_advance = 0; - openair0_cfg[0].tx_scheduling_advance = 10*openair0_cfg[0].samples_per_packet; + openair0_cfg[0].tx_sample_advance = 113; + openair0_cfg[0].tx_scheduling_advance = 9*openair0_cfg[0].samples_per_packet; break; case 7680000: openair0_cfg[0].samples_per_packet = 1024; - openair0_cfg[0].tx_sample_advance = 0; - openair0_cfg[0].tx_scheduling_advance = 10*openair0_cfg[0].samples_per_packet; - break; + openair0_cfg[0].tx_sample_advance = 70; + openair0_cfg[0].tx_scheduling_advance = 9*openair0_cfg[0].samples_per_packet; + break; case 1920000: openair0_cfg[0].samples_per_packet = 256; - openair0_cfg[0].tx_sample_advance = 0; - openair0_cfg[0].tx_scheduling_advance = 16*openair0_cfg[0].samples_per_packet; + openair0_cfg[0].tx_sample_advance = 40; + openair0_cfg[0].tx_scheduling_advance = 8*openair0_cfg[0].samples_per_packet; break; default: printf("Error: unknown sampling rate %f\n",openair0_cfg[0].sample_rate); From dded63e6e9b9ddb06cec686cf172c896dc2adc1e Mon Sep 17 00:00:00 2001 From: Rohit Gupta Date: Mon, 15 Feb 2016 19:42:59 +0100 Subject: [PATCH 21/55] added flags param to trx_brf_write --- targets/ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/targets/ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.c b/targets/ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.c index a5f0c0adbb..2f73d6978c 100644 --- a/targets/ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.c +++ b/targets/ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.c @@ -104,8 +104,9 @@ static void trx_brf_stats(openair0_device *device){ @param buff Buffer which holds the samples @param nsamps number of samples to be sent @param cc index of the component carrier + @param flags Ignored for the moment */ -static int trx_brf_write(openair0_device *device,openair0_timestamp ptimestamp, void **buff, int nsamps, int cc) { +static int trx_brf_write(openair0_device *device,openair0_timestamp ptimestamp, void **buff, int nsamps, int cc, int flags) { int status; brf_state_t *brf = (brf_state_t*)device->priv; From 7998985dd5ae3434093e77cd89177be42337cc51 Mon Sep 17 00:00:00 2001 From: kaltenbe Date: Mon, 15 Feb 2016 22:31:28 +0100 Subject: [PATCH 22/55] 10 MHz configurations for SoDeRa. --- targets/ARCH/LMSSDR/USERSPACE/LIB/lms_lib.cpp | 29 +- ...nb_sodera_highband_10MHz_rx19dB_txfull.ini | 1128 +++++++++++++++++ 2 files changed, 1144 insertions(+), 13 deletions(-) create mode 100644 targets/ARCH/LMSSDR/enb_sodera_highband_10MHz_rx19dB_txfull.ini diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lms_lib.cpp b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms_lib.cpp index 2402027506..8ee4845b51 100644 --- a/targets/ARCH/LMSSDR/USERSPACE/LIB/lms_lib.cpp +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms_lib.cpp @@ -645,25 +645,26 @@ int trx_lms_start(openair0_device *device){ // Set TX filter printf("Tuning TX filter\n"); - opStatus = lms7->TuneTxFilter(LMS7002M::TxFilter::TX_HIGHBAND,28.0); + opStatus = lms7->TuneTxFilter(LMS7002M::TxFilter::TX_HIGHBAND,device->openair0_cfg[0].tx_bw/1e6); if (opStatus != LIBLMS7_SUCCESS) { - printf("Warning: Could not tune TX filter\n"); + printf("Warning: Could not tune TX filter to %f MHz\n",device->openair0_cfg[0].tx_bw/1e6); } printf("Tuning RX filter\n"); - opStatus = lms7->TuneRxFilter(LMS7002M::RxFilter::RX_LPF_LOWBAND,5.0); + + opStatus = lms7->TuneRxFilter(LMS7002M::RxFilter::RX_LPF_LOWBAND,device->openair0_cfg[0].rx_bw/1e6); if (opStatus != LIBLMS7_SUCCESS) { - printf("Warning: Could not tune RX filter\n"); + printf("Warning: Could not tune RX filter to %f MHz\n",device->openair0_cfg[0].rx_bw/1e6); } - printf("Tuning TIA filter\n"); + /* printf("Tuning TIA filter\n"); opStatus = lms7->TuneRxFilter(LMS7002M::RxFilter::RX_TIA,7.0); if (opStatus != LIBLMS7_SUCCESS) { printf("Warning: Could not tune RX TIA filter\n"); - } + }*/ opStatus = lms7->SetInterfaceFrequency(lms7->GetFrequencyCGEN_MHz(), lms7->Get_SPI_Reg_bits(HBI_OVR_TXTSP), @@ -683,7 +684,9 @@ int trx_lms_start(openair0_device *device){ lmsStream = new LMS_StreamBoard(usbport); LMS_StreamBoard::Status opStreamStatus; // this will configure that sampling rate at output of FPGA - opStreamStatus = lmsStream->ConfigurePLL(usbport,device->openair0_cfg[0].sample_rate,device->openair0_cfg[0].sample_rate,90); + opStreamStatus = lmsStream->ConfigurePLL(usbport, + device->openair0_cfg[0].sample_rate, + device->openair0_cfg[0].sample_rate,90); if (opStatus != LIBLMS7_SUCCESS){ printf("Sample rate programming failed\n"); exit(-1); @@ -827,16 +830,16 @@ int openair0_dev_init_lms(openair0_device *device, openair0_config_t *openair0_c case 15360000: openair0_cfg[0].samples_per_packet = 2048; openair0_cfg[0].tx_sample_advance = 45; - openair0_cfg[0].tx_bw = 15.36e6; - openair0_cfg[0].rx_bw = 15.36e6; - openair0_cfg[0].tx_scheduling_advance = 5*openair0_cfg[0].samples_per_packet; + openair0_cfg[0].tx_bw = 28e6; + openair0_cfg[0].rx_bw = 10e6; + openair0_cfg[0].tx_scheduling_advance = 8*openair0_cfg[0].samples_per_packet; break; case 7680000: openair0_cfg[0].samples_per_packet = 1024; openair0_cfg[0].tx_sample_advance = 70; - openair0_cfg[0].tx_bw = 7.68e6; - openair0_cfg[0].rx_bw = 7.68e6; - openair0_cfg[0].tx_scheduling_advance = 12*openair0_cfg[0].samples_per_packet; + openair0_cfg[0].tx_bw = 28e6; + openair0_cfg[0].rx_bw = 5.0e6; + openair0_cfg[0].tx_scheduling_advance = 5*openair0_cfg[0].samples_per_packet; break; case 1920000: openair0_cfg[0].samples_per_packet = 256; diff --git a/targets/ARCH/LMSSDR/enb_sodera_highband_10MHz_rx19dB_txfull.ini b/targets/ARCH/LMSSDR/enb_sodera_highband_10MHz_rx19dB_txfull.ini new file mode 100644 index 0000000000..e4e420c334 --- /dev/null +++ b/targets/ARCH/LMSSDR/enb_sodera_highband_10MHz_rx19dB_txfull.ini @@ -0,0 +1,1128 @@ +[file_info] +type=lms7002m_minimal_config +version=1 +[lms7002_registers_a] +0x0493=0x0000 +0x0492=0x0000 +0x0491=0x0000 +0x029B=0x0000 +0x048E=0x0000 +0x0022=0x07FF +0x0283=0x0000 +0x0487=0x0000 +0x0486=0x0000 +0x045F=0x0000 +0x0480=0x0000 +0x0460=0x0000 +0x0447=0x0000 +0x045A=0x0000 +0x02DA=0x0000 +0x0458=0x0000 +0x0314=0x0000 +0x0456=0x0000 +0x0559=0xACB9 +0x0451=0x0000 +0x0390=0x0000 +0x044B=0x0000 +0x0448=0x0000 +0x0454=0x0000 +0x0446=0x0000 +0x04CA=0x0000 +0x0444=0x0000 +0x0443=0x0000 +0x0508=0xEF99 +0x0441=0x0000 +0x040D=0x0000 +0x040B=0x000F +0x0409=0x0000 +0x0580=0xEFF2 +0x0407=0x0000 +0x0405=0x0000 +0x0254=0x0000 +0x0404=0x0000 +0x00A0=0x6565 +0x0560=0x174B +0x0403=0x0013 +0x0402=0x07D9 +0x055E=0xDB10 +0x03A7=0x0000 +0x0520=0x174B +0x03A5=0x0000 +0x03A4=0x0000 +0x03A3=0x0000 +0x03A2=0x0000 +0x051C=0x0000 +0x048D=0x0000 +0x059A=0x0000 +0x03A1=0x0000 +0x02A2=0x0000 +0x04E1=0x0000 +0x039F=0x0000 +0x0248=0x0000 +0x039B=0x0000 +0x0408=0x0000 +0x0398=0x0000 +0x0393=0x0000 +0x0305=0x0000 +0x038E=0x0000 +0x0324=0x0000 +0x02E7=0x0000 +0x038D=0x0000 +0x0387=0x0000 +0x03A0=0x0000 +0x02D0=0x0000 +0x009A=0x658C +0x054E=0x8184 +0x0386=0x0000 +0x040F=0x43E4 +0x04E3=0x0000 +0x0389=0x0000 +0x054F=0x18C9 +0x0385=0x0000 +0x0315=0x0000 +0x0384=0x0000 +0x0382=0x0000 +0x0288=0x0000 +0x0366=0x0000 +0x0365=0x0000 +0x0364=0x0000 +0x0325=0x0000 +0x0081=0x0000 +0x0362=0x0000 +0x038A=0x0000 +0x035E=0x0000 +0x035D=0x0000 +0x0442=0x0000 +0x0449=0x0000 +0x035A=0x0000 +0x02C8=0x0000 +0x0452=0x0000 +0x0299=0x0000 +0x0359=0x0000 +0x0358=0x0000 +0x048B=0x0000 +0x0354=0x0000 +0x0351=0x0000 +0x03A6=0x0000 +0x0293=0x0000 +0x034E=0x0000 +0x035C=0x0000 +0x034D=0x0000 +0x034B=0x0000 +0x011A=0x2E14 +0x0455=0x0000 +0x034A=0x0000 +0x0348=0x0000 +0x0084=0x0400 +0x0498=0x0000 +0x035B=0x0000 +0x0505=0x00D8 +0x0345=0x0000 +0x0484=0x0000 +0x0586=0x196B +0x0344=0x0000 +0x0561=0xAB08 +0x0343=0x0000 +0x0342=0x0000 +0x0380=0x0000 +0x0327=0x0000 +0x0322=0x0000 +0x059B=0x0000 +0x0321=0x0000 +0x045E=0x0000 +0x0440=0x0024 +0x031D=0x0000 +0x0363=0x0000 +0x031A=0x0000 +0x031C=0x0000 +0x028F=0x0000 +0x0341=0x0000 +0x0287=0x0000 +0x0318=0x0000 +0x031F=0x0000 +0x0316=0x0000 +0x030D=0x0000 +0x040E=0x0003 +0x0352=0x0000 +0x028C=0x0000 +0x0360=0x0000 +0x0313=0x0000 +0x0461=0x0000 +0x010A=0x104C +0x051B=0xB77F +0x0312=0x0000 +0x0346=0x0000 +0x024E=0x0000 +0x0311=0x0000 +0x02D6=0x0000 +0x030C=0x0000 +0x04DF=0x0000 +0x030B=0x0000 +0x0392=0x0000 +0x030A=0x0000 +0x029F=0x0000 +0x0309=0x0000 +0x048A=0x0000 +0x0308=0x0000 +0x0588=0xE6C7 +0x0397=0x0000 +0x02E3=0x0000 +0x049C=0x0000 +0x044A=0x0000 +0x04A4=0x0000 +0x0306=0x0000 +0x0304=0x0000 +0x04D5=0x0000 +0x0303=0x0000 +0x0302=0x0000 +0x0510=0xE6C7 +0x044E=0x0000 +0x0300=0x0000 +0x034F=0x0000 +0x045B=0x0000 +0x02E6=0x0000 +0x00A3=0x6565 +0x04DA=0x0000 +0x025E=0x0000 +0x020A=0x0080 +0x0102=0x3180 +0x020C=0x8000 +0x05A2=0x0000 +0x040A=0x1000 +0x0556=0xA2B5 +0x0243=0x0000 +0x051D=0x4F91 +0x0259=0x0000 +0x02D5=0x0000 +0x02E1=0x0000 +0x011D=0xAAAA +0x039E=0x0000 +0x0252=0x0000 +0x0204=0xC016 +0x0255=0x0000 +0x0281=0x0000 +0x0200=0x0301 +0x0594=0xF40D +0x02C5=0x0000 +0x0406=0x0000 +0x030F=0x0000 +0x025D=0x0000 +0x0319=0x0000 +0x0121=0x3760 +0x0101=0x7800 +0x025B=0x0000 +0x02C6=0x0000 +0x0558=0x5009 +0x0021=0x0E9F +0x04C2=0x0000 +0x0290=0x0000 +0x02DF=0x0000 +0x0291=0x0000 +0x0296=0x0000 +0x029C=0x0000 +0x028D=0x0000 +0x02A1=0x0000 +0x008B=0x2756 +0x02A3=0x0000 +0x05A4=0x0000 +0x02A7=0x0000 +0x0483=0x0000 +0x0201=0x07FF +0x02C2=0x0000 +0x02C4=0x0000 +0x044D=0x0000 +0x02E2=0x0000 +0x02D1=0x0000 +0x0546=0x8D44 +0x04C8=0x0000 +0x0207=0x0000 +0x04C6=0x0000 +0x0096=0x0000 +0x0093=0x0000 +0x0250=0x0000 +0x02CB=0x0000 +0x02D3=0x0000 +0x0494=0x0000 +0x04CF=0x0000 +0x025F=0x0000 +0x0251=0x0000 +0x0488=0x0000 +0x0496=0x0000 +0x04C3=0x0000 +0x0100=0x3409 +0x04CC=0x0000 +0x02A5=0x0000 +0x0257=0x0000 +0x04D6=0x0000 +0x04A6=0x0000 +0x049A=0x0000 +0x049B=0x0000 +0x0097=0x0000 +0x011E=0x0A2A +0x0285=0x0000 +0x0280=0x0000 +0x049E=0x0000 +0x0020=0xFFFD +0x02DD=0x0000 +0x0297=0x0000 +0x049F=0x0000 +0x0522=0xDB10 +0x044C=0x0000 +0x0355=0x0000 +0x04A0=0x0000 +0x02CF=0x0000 +0x04D1=0x0000 +0x0526=0xBE2A +0x0092=0x0001 +0x031B=0x0000 +0x0541=0x4C24 +0x0518=0xEFF2 +0x0543=0xBD96 +0x02C0=0x0000 +0x0499=0x0000 +0x04A1=0x0000 +0x058D=0xF5EF +0x02D7=0x0000 +0x0513=0xDAA2 +0x0549=0x18C9 +0x0552=0x8D44 +0x0521=0x5852 +0x0509=0x0605 +0x0286=0x0000 +0x024F=0x0000 +0x04E0=0x0000 +0x0545=0x364E +0x0349=0x0000 +0x0555=0xBD96 +0x04E4=0x0000 +0x02E4=0x0000 +0x0551=0xD7B7 +0x055D=0xA6B5 +0x0298=0x0000 +0x055F=0x5852 +0x009E=0x658C +0x0547=0xD7B7 +0x0598=0xF61D +0x0123=0x067B +0x0497=0x0000 +0x04A5=0x0000 +0x0565=0xB77F +0x0124=0x0000 +0x0592=0x0DF1 +0x0591=0xFCFE +0x0548=0x79FA +0x04D2=0x0000 +0x0599=0x0000 +0x0511=0x1D10 +0x0506=0x0DF1 +0x0595=0x00BC +0x0584=0xE7E2 +0x0242=0x0000 +0x025A=0x0000 +0x04E2=0x0000 +0x04C5=0x0000 +0x058C=0xEA50 +0x0450=0x0000 +0x0596=0x0A94 +0x05A7=0x0000 +0x058A=0x17DC +0x059D=0x0000 +0x0485=0x0000 +0x058E=0x1316 +0x0550=0x79FA +0x0554=0x6901 +0x0593=0x00D8 +0x0542=0xA2B5 +0x0553=0x364E +0x0563=0x4F91 +0x024D=0x0000 +0x0567=0x4049 +0x055A=0xBE2A +0x0295=0x0000 +0x0566=0x0906 +0x028A=0x0000 +0x059C=0x0000 +0x04DD=0x0000 +0x054C=0x7FFF +0x0582=0x150F +0x0585=0xDAA2 +0x0109=0x8CC1 +0x04A2=0x0000 +0x0292=0x0000 +0x059F=0x0000 +0x0583=0x2E45 +0x050E=0x17DC +0x0516=0x150F +0x0523=0xA6B5 +0x0525=0x57AC +0x0206=0x0000 +0x051A=0x0906 +0x055C=0x3347 +0x0514=0xE7E2 +0x050F=0xEA5F +0x05A6=0x0000 +0x051E=0xF524 +0x050A=0x1316 +0x04C7=0x0000 +0x049D=0x0000 +0x0527=0xACB9 +0x050C=0xEA50 +0x0087=0x0000 +0x0399=0x0000 +0x050B=0xF5EF +0x0507=0xFCFE +0x010D=0x00DE +0x04C4=0x0000 +0x0495=0x0000 +0x0246=0x0000 +0x0503=0x00BC +0x0320=0x0000 +0x0323=0x0000 +0x02E5=0x0000 +0x055B=0x57AC +0x0114=0x0110 +0x04D8=0x0000 +0x04E7=0x0000 +0x04D0=0x0000 +0x04E6=0x0000 +0x00AE=0x0000 +0x0544=0x6901 +0x0258=0x0000 +0x0502=0x0A94 +0x04DE=0x0000 +0x058B=0x0F45 +0x0028=0x0101 +0x029E=0x0000 +0x04DC=0x0000 +0x04D9=0x0000 +0x0557=0x4C24 +0x058F=0x0605 +0x04DB=0x0000 +0x04D7=0x0000 +0x059E=0x0000 +0x024C=0x0000 +0x02DC=0x0000 +0x04D4=0x0000 +0x0504=0xF40D +0x02C3=0x0000 +0x04C1=0x0000 +0x04D3=0x0000 +0x0590=0xEF99 +0x04CE=0x0000 +0x05A5=0x0000 +0x04A7=0x0000 +0x0489=0x0000 +0x02E0=0x0000 +0x0118=0x018C +0x002A=0x0086 +0x0245=0x0000 +0x045D=0x0000 +0x0581=0xC89D +0x02D2=0x0000 +0x039C=0x0000 +0x002B=0x4032 +0x02A0=0x0000 +0x010E=0x0285 +0x0394=0x0000 +0x0459=0x0000 +0x0088=0x04F0 +0x0085=0x0001 +0x0089=0x0048 +0x0256=0x0000 +0x0111=0x0099 +0x0095=0x0000 +0x0203=0x2F99 +0x030E=0x0000 +0x0482=0x0000 +0x05A0=0x0000 +0x009C=0x658C +0x0381=0x0000 +0x0122=0x033F +0x0110=0x0BFF +0x0026=0x0101 +0x0294=0x0000 +0x009D=0x6565 +0x0524=0x3347 +0x0106=0x3182 +0x028E=0x0000 +0x0326=0x0000 +0x0113=0x03C3 +0x0391=0x0000 +0x04CB=0x0000 +0x010F=0x3042 +0x0119=0x18DF +0x02A6=0x0000 +0x05A1=0x0000 +0x02C9=0x0000 +0x0500=0xF61D +0x039D=0x0000 +0x011F=0x3600 +0x0395=0x0000 +0x024B=0x0000 +0x045C=0x0000 +0x0247=0x0000 +0x0512=0x196B +0x04E5=0x0000 +0x0024=0x50D8 +0x0353=0x0000 +0x050D=0x0F45 +0x02CD=0x0000 +0x0490=0x0000 +0x0501=0xFDFB +0x034C=0x0000 +0x00AA=0x0000 +0x0350=0x0000 +0x0445=0x0000 +0x048F=0x0000 +0x008A=0x0491 +0x0453=0x0000 +0x0260=0x0000 +0x00A1=0x6565 +0x0356=0x0000 +0x0241=0x0000 +0x008C=0x267B +0x038F=0x0000 +0x054A=0x8184 +0x00A4=0x6565 +0x0401=0x07FF +0x04CD=0x0000 +0x0249=0x0000 +0x002C=0x0000 +0x054D=0xF7A3 +0x00A6=0x0001 +0x002D=0xFFFF +0x00AC=0x2000 +0x0253=0x0000 +0x028B=0x0000 +0x040C=0x40F8 +0x0310=0x0000 +0x0099=0x6565 +0x00A2=0x6565 +0x0589=0xEA5F +0x002F=0x3840 +0x035F=0x0000 +0x0597=0xFDFB +0x0116=0x8180 +0x02CC=0x0000 +0x0025=0x0101 +0x0562=0xF524 +0x011C=0xA941 +0x0289=0x0000 +0x0282=0x0000 +0x0307=0x0000 +0x038C=0x0000 +0x02C7=0x0000 +0x054B=0xF7A3 +0x0519=0x4049 +0x009F=0x658C +0x025C=0x0000 +0x0515=0x2E45 +0x00A5=0x6565 +0x0301=0x0000 +0x02C1=0x0000 +0x0481=0x0000 +0x0517=0xC89D +0x00A8=0x0000 +0x0564=0x0000 +0x00AB=0x0040 +0x0261=0x0000 +0x002E=0x0000 +0x02DE=0x0000 +0x02A4=0x0000 +0x0540=0x5009 +0x00AD=0x03FF +0x0029=0x0101 +0x024A=0x0000 +0x00A7=0x6565 +0x0027=0x05E4 +0x0117=0x100C +0x0098=0x0000 +0x0108=0xFC26 +0x020B=0x4000 +0x0383=0x0000 +0x0202=0x0794 +0x0086=0x4101 +0x010C=0x8865 +0x02D8=0x0000 +0x0347=0x0000 +0x0457=0x0000 +0x0103=0x0612 +0x0104=0x0088 +0x0357=0x0000 +0x02DB=0x0000 +0x0400=0x0101 +0x009B=0x6565 +0x0105=0x0007 +0x05A3=0x0000 +0x0240=0x0028 +0x0367=0x0000 +0x044F=0x0000 +0x038B=0x0000 +0x02D9=0x0000 +0x02CE=0x0000 +0x0284=0x0000 +0x0396=0x0000 +0x029A=0x0000 +0x051F=0xAB08 +0x0361=0x0000 +0x0205=0x0000 +0x031E=0x0000 +0x04C0=0x0000 +0x0587=0x1D10 +0x0023=0x5550 +0x048C=0x0000 +0x0112=0x3171 +0x039A=0x0000 +0x0115=0x0009 +0x00A9=0x8000 +0x0317=0x0000 +0x0244=0x0000 +0x0094=0x0000 +0x0340=0x0000 +0x0208=0x0170 +0x04A3=0x0000 +0x029D=0x0000 +0x0388=0x0000 +0x0120=0xB9FF +0x04C9=0x0000 +0x02CA=0x0000 +0x0209=0x0000 +0x0082=0x8001 +0x02D4=0x0000 +0x0107=0x318C +[lms7002_registers_b] +0x04E1=0x0000 +0x03A1=0x0000 +0x02A2=0x0000 +0x04E0=0x0000 +0x04DE=0x0000 +0x058B=0x0000 +0x04DC=0x0000 +0x04DB=0x0000 +0x04D9=0x0000 +0x04D5=0x0000 +0x0304=0x0000 +0x04D4=0x0000 +0x0504=0x0000 +0x04D3=0x0000 +0x04D2=0x0000 +0x0548=0x0000 +0x04D0=0x0000 +0x04CF=0x0000 +0x025F=0x0000 +0x04CE=0x0000 +0x04CC=0x0000 +0x02A5=0x0000 +0x04C6=0x0000 +0x0207=0x0000 +0x04C1=0x0000 +0x02C3=0x0000 +0x04C9=0x0000 +0x02CA=0x0000 +0x04C0=0x0000 +0x031E=0x0000 +0x04D6=0x0000 +0x0257=0x0000 +0x04A6=0x0000 +0x04A5=0x0000 +0x04A2=0x0000 +0x0109=0x61C1 +0x049D=0x0000 +0x04C7=0x0000 +0x049C=0x0000 +0x0397=0x0000 +0x02E3=0x0000 +0x0499=0x0000 +0x02C0=0x0000 +0x0496=0x0000 +0x04C3=0x0000 +0x0493=0x0000 +0x04A1=0x0000 +0x0492=0x0000 +0x0491=0x0000 +0x029B=0x0000 +0x048E=0x0000 +0x0283=0x0000 +0x048C=0x0000 +0x048B=0x0000 +0x0358=0x0000 +0x0487=0x0000 +0x0486=0x0000 +0x045F=0x0000 +0x0480=0x0000 +0x0460=0x0000 +0x0447=0x0000 +0x045A=0x0000 +0x02DA=0x0000 +0x0458=0x0000 +0x0314=0x0000 +0x0456=0x0000 +0x0559=0x0000 +0x0453=0x0000 +0x0451=0x0000 +0x0390=0x0000 +0x044D=0x0000 +0x02E2=0x0000 +0x044B=0x0000 +0x0448=0x0000 +0x0454=0x0000 +0x0446=0x0000 +0x04CA=0x0000 +0x0444=0x0000 +0x0443=0x0000 +0x0508=0x0000 +0x0441=0x0000 +0x040D=0x0000 +0x040B=0x7FFF +0x0409=0x0000 +0x0580=0x0000 +0x0407=0x0000 +0x0405=0x0000 +0x0254=0x0000 +0x0404=0x0000 +0x0560=0x0000 +0x04D8=0x0000 +0x0403=0x0000 +0x0402=0x07FF +0x055E=0x0000 +0x03A7=0x0000 +0x0520=0x0000 +0x03A5=0x0000 +0x03A4=0x0000 +0x03A3=0x0000 +0x03A2=0x0000 +0x051C=0x0000 +0x048D=0x0000 +0x059A=0x0000 +0x049E=0x0000 +0x039F=0x0000 +0x0248=0x0000 +0x039B=0x0000 +0x0399=0x0000 +0x0408=0x0000 +0x0398=0x0000 +0x0497=0x0000 +0x0123=0x267B +0x0394=0x0000 +0x0459=0x0000 +0x0393=0x0000 +0x0305=0x0000 +0x038E=0x0000 +0x0324=0x0000 +0x02E7=0x0000 +0x038D=0x0000 +0x0395=0x0000 +0x038A=0x0000 +0x0362=0x0000 +0x0387=0x0000 +0x0200=0x0081 +0x0594=0x0000 +0x02C5=0x0000 +0x02A7=0x0000 +0x0318=0x0000 +0x0544=0x0000 +0x049A=0x0000 +0x0388=0x0000 +0x0120=0xB9FF +0x020A=0x0080 +0x0102=0x3180 +0x0290=0x0000 +0x02DF=0x0000 +0x0291=0x0000 +0x0295=0x0000 +0x055A=0x0000 +0x029C=0x0000 +0x010E=0x2040 +0x02A0=0x0000 +0x010F=0x3042 +0x02A6=0x0000 +0x0119=0x18CB +0x02D2=0x0000 +0x039C=0x0000 +0x028D=0x0000 +0x02A1=0x0000 +0x02C2=0x0000 +0x045E=0x0000 +0x031D=0x0000 +0x0440=0x0020 +0x02C4=0x0000 +0x04D1=0x0000 +0x02CF=0x0000 +0x02C1=0x0000 +0x02C7=0x0000 +0x054B=0x0000 +0x02D3=0x0000 +0x04C8=0x0000 +0x02D1=0x0000 +0x0546=0x0000 +0x0306=0x0000 +0x02D7=0x0000 +0x058D=0x0000 +0x0457=0x0000 +0x02D8=0x0000 +0x0347=0x0000 +0x0103=0x0A12 +0x0104=0x0088 +0x0357=0x0000 +0x02DB=0x0000 +0x0400=0x0081 +0x0209=0x0000 +0x0297=0x0000 +0x02DD=0x0000 +0x029E=0x0000 +0x02DE=0x0000 +0x0527=0x0000 +0x02D5=0x0000 +0x02E1=0x0000 +0x0259=0x0000 +0x0481=0x0000 +0x0517=0x0000 +0x029A=0x0000 +0x051F=0x0000 +0x0483=0x0000 +0x0201=0x07FF +0x0507=0x0000 +0x0321=0x0000 +0x034F=0x0000 +0x0296=0x0000 +0x0510=0x0000 +0x0302=0x0000 +0x038C=0x0000 +0x0307=0x0000 +0x0282=0x0000 +0x0392=0x0000 +0x030B=0x0000 +0x0588=0x0000 +0x0308=0x0000 +0x048A=0x0000 +0x044A=0x0000 +0x04A4=0x0000 +0x04C4=0x0000 +0x010D=0x009E +0x0300=0x0000 +0x0587=0x0000 +0x044E=0x0000 +0x0309=0x0000 +0x0585=0x0000 +0x02E5=0x0000 +0x055B=0x0000 +0x0114=0x008D +0x0323=0x0000 +0x0320=0x0000 +0x0503=0x0000 +0x0513=0x0000 +0x0319=0x0000 +0x0260=0x0000 +0x0549=0x0000 +0x0552=0x0000 +0x0509=0x0000 +0x0521=0x0000 +0x0286=0x0000 +0x04D7=0x0000 +0x059E=0x0000 +0x0557=0x0000 +0x058F=0x0000 +0x0322=0x0000 +0x059B=0x0000 +0x0545=0x0000 +0x0349=0x0000 +0x0555=0x0000 +0x02E4=0x0000 +0x04E4=0x0000 +0x0551=0x0000 +0x0312=0x0000 +0x055D=0x0000 +0x0298=0x0000 +0x055F=0x0000 +0x011D=0xAAAA +0x039E=0x0000 +0x0547=0x0000 +0x0598=0x0000 +0x0449=0x0000 +0x0564=0x0000 +0x0242=0x0000 +0x0525=0x0000 +0x0523=0x0000 +0x0565=0x0000 +0x0124=0x0000 +0x0592=0x0000 +0x0591=0x0000 +0x0563=0x0000 +0x024D=0x0000 +0x0567=0x0000 +0x05A5=0x0000 +0x0566=0x0000 +0x030A=0x0000 +0x029F=0x0000 +0x054C=0x0000 +0x0582=0x0000 +0x0599=0x0000 +0x0511=0x0000 +0x0506=0x0000 +0x0301=0x0000 +0x0595=0x0000 +0x0584=0x0000 +0x058C=0x0000 +0x051E=0x0000 +0x05A6=0x0000 +0x050F=0x0000 +0x0590=0x0000 +0x05A0=0x0000 +0x0596=0x0000 +0x05A7=0x0000 +0x0562=0x0000 +0x058A=0x0000 +0x059D=0x0000 +0x0485=0x0000 +0x0581=0x0000 +0x045D=0x0000 +0x0245=0x0000 +0x0310=0x0000 +0x058E=0x0000 +0x05A2=0x0000 +0x054D=0x0000 +0x020C=0x7FFF +0x0589=0x0000 +0x0522=0x0000 +0x049F=0x0000 +0x031F=0x0000 +0x0292=0x0000 +0x059F=0x0000 +0x0583=0x0000 +0x0543=0x0000 +0x0317=0x0000 +0x0244=0x0000 +0x0554=0x0000 +0x0593=0x0000 +0x05A4=0x0000 +0x02A3=0x0000 +0x0553=0x0000 +0x0542=0x0000 +0x0519=0x0000 +0x024F=0x0000 +0x0524=0x0000 +0x0518=0x0000 +0x0354=0x0000 +0x0526=0x0000 +0x031B=0x0000 +0x050E=0x0000 +0x0516=0x0000 +0x02CB=0x0000 +0x0250=0x0000 +0x031C=0x0000 +0x028F=0x0000 +0x051A=0x0000 +0x055C=0x0000 +0x0514=0x0000 +0x050A=0x0000 +0x050C=0x0000 +0x050B=0x0000 +0x04E7=0x0000 +0x04E6=0x0000 +0x04E5=0x0000 +0x0512=0x0000 +0x0206=0x0000 +0x0550=0x0000 +0x0360=0x0000 +0x030E=0x0000 +0x0203=0x0000 +0x0482=0x0000 +0x0541=0x0000 +0x0122=0x033F +0x0110=0x0BF4 +0x0204=0x0000 +0x0252=0x0000 +0x011E=0x0AA7 +0x049B=0x0000 +0x0294=0x0000 +0x011C=0xA941 +0x02D6=0x0000 +0x0311=0x0000 +0x0117=0x280C +0x02A4=0x0000 +0x0540=0x0000 +0x02E0=0x0000 +0x0118=0x018C +0x0489=0x0000 +0x04A7=0x0000 +0x0101=0x7800 +0x0558=0x0000 +0x02C6=0x0000 +0x05A1=0x0000 +0x02C9=0x0000 +0x039D=0x0000 +0x0500=0x0000 +0x0450=0x0000 +0x011F=0x3600 +0x030C=0x0000 +0x04DF=0x0000 +0x0281=0x0000 +0x0106=0x3182 +0x028E=0x0000 +0x0326=0x0000 +0x0113=0x03C3 +0x04CB=0x0000 +0x0391=0x0000 +0x0105=0x0007 +0x02D9=0x0000 +0x02CE=0x0000 +0x038B=0x0000 +0x044F=0x0000 +0x02D4=0x0000 +0x0107=0x318C +0x0495=0x0000 +0x0246=0x0000 +0x0303=0x0000 +0x02E6=0x0000 +0x045B=0x0000 +0x0100=0x3409 +0x0340=0x0000 +0x0208=0x0070 +0x0111=0x0083 +0x0247=0x0000 +0x024B=0x0000 +0x045C=0x0000 +0x0383=0x0000 +0x0202=0x07FF +0x054A=0x0000 +0x0401=0x07FF +0x0341=0x0000 +0x0287=0x0000 +0x034C=0x0000 +0x0501=0x0000 +0x030F=0x0000 +0x025D=0x0000 +0x0406=0x0000 +0x0313=0x0000 +0x010A=0x104C +0x0461=0x0000 +0x051B=0x0000 +0x0121=0x31FA +0x0115=0x0009 +0x0112=0xC0E6 +0x039A=0x0000 +0x02CC=0x0000 +0x0116=0x8180 +0x04A0=0x0000 +0x0108=0x9442 +0x020B=0x4000 +0x0251=0x0000 +0x0488=0x0000 +0x0241=0x0000 +0x038F=0x0000 +0x02DC=0x0000 +0x024C=0x0000 +0x0494=0x0000 +0x051D=0x0000 +0x0243=0x0000 +0x0556=0x0000 +0x040A=0x0000 +0x04CD=0x0000 +0x0249=0x0000 +0x0261=0x0000 +0x024A=0x0000 +0x0285=0x0000 +0x0280=0x0000 +0x0346=0x0000 +0x024E=0x0000 +0x0253=0x0000 +0x028B=0x0000 +0x040C=0x0000 +0x0255=0x0000 +0x0258=0x0000 +0x0502=0x0000 +0x05A3=0x0000 +0x0367=0x0000 +0x0240=0x0020 +0x0256=0x0000 +0x025A=0x0000 +0x04E2=0x0000 +0x04C5=0x0000 +0x025B=0x0000 +0x0205=0x0000 +0x0361=0x0000 +0x0515=0x0000 +0x025C=0x0000 +0x0355=0x0000 +0x044C=0x0000 +0x010C=0x88FD +0x0284=0x0000 +0x0396=0x0000 +0x0363=0x0000 +0x031A=0x0000 +0x0289=0x0000 +0x028A=0x0000 +0x04DD=0x0000 +0x059C=0x0000 +0x0352=0x0000 +0x028C=0x0000 +0x04C2=0x0000 +0x04DA=0x0000 +0x025E=0x0000 +0x0327=0x0000 +0x0380=0x0000 +0x0342=0x0000 +0x0343=0x0000 +0x0344=0x0000 +0x0561=0x0000 +0x035A=0x0000 +0x02C8=0x0000 +0x0484=0x0000 +0x0586=0x0000 +0x0597=0x0000 +0x035F=0x0000 +0x0345=0x0000 +0x0505=0x0000 +0x035B=0x0000 +0x034A=0x0000 +0x0455=0x0000 +0x011A=0x2E02 +0x034B=0x0000 +0x034D=0x0000 +0x035C=0x0000 +0x034E=0x0000 +0x0293=0x0000 +0x03A6=0x0000 +0x0350=0x0000 +0x0445=0x0000 +0x048F=0x0000 +0x0351=0x0000 +0x0353=0x0000 +0x050D=0x0000 +0x02CD=0x0000 +0x0490=0x0000 +0x0498=0x0000 +0x0348=0x0000 +0x0356=0x0000 +0x030D=0x0000 +0x0316=0x0000 +0x040E=0x0000 +0x04A3=0x0000 +0x029D=0x0000 +0x0359=0x0000 +0x0299=0x0000 +0x0452=0x0000 +0x0442=0x0000 +0x035D=0x0000 +0x035E=0x0000 +0x0325=0x0000 +0x0364=0x0000 +0x0365=0x0000 +0x0366=0x0000 +0x0381=0x0000 +0x0288=0x0000 +0x0382=0x0000 +0x0384=0x0000 +0x0315=0x0000 +0x0385=0x0000 +0x04E3=0x0000 +0x040F=0x0000 +0x0389=0x0000 +0x054F=0x0000 +0x0386=0x0000 +0x02D0=0x0000 +0x054E=0x0000 +0x03A0=0x0000 +[reference_clocks] +sxt_ref_clk_mhz=30.72 +sxr_ref_clk_mhz=30.72 From b30d3c92ad5c18b70da0b7d89b8349d42fe211da Mon Sep 17 00:00:00 2001 From: Raymond Knopp Date: Tue, 16 Feb 2016 02:31:48 -0800 Subject: [PATCH 23/55] added missing threequarter_fs parameter to lte_param_init in ulsim.c --- openair1/SIMULATION/LTE_PHY/dlsim.c | 12 +++++++++++- openair1/SIMULATION/LTE_PHY/ulsim.c | 8 +++++++- 2 files changed, 18 insertions(+), 2 deletions(-) diff --git a/openair1/SIMULATION/LTE_PHY/dlsim.c b/openair1/SIMULATION/LTE_PHY/dlsim.c index fbb88bf052..2c3d0848c2 100644 --- a/openair1/SIMULATION/LTE_PHY/dlsim.c +++ b/openair1/SIMULATION/LTE_PHY/dlsim.c @@ -656,7 +656,17 @@ int main(int argc, char **argv) printf("dual_stream_UE=%d\n", dual_stream_UE); } - lte_param_init(n_tx,n_rx,transmission_mode,extended_prefix_flag,frame_type,Nid_cell,tdd_config,N_RB_DL,threequarter_fs,osf,perfect_ce); + lte_param_init(n_tx, + n_rx, + transmission_mode, + extended_prefix_flag, + frame_type, + Nid_cell, + tdd_config, + N_RB_DL, + threequarter_fs, + osf, + perfect_ce); diff --git a/openair1/SIMULATION/LTE_PHY/ulsim.c b/openair1/SIMULATION/LTE_PHY/ulsim.c index a72f2ad6c5..463c74c123 100644 --- a/openair1/SIMULATION/LTE_PHY/ulsim.c +++ b/openair1/SIMULATION/LTE_PHY/ulsim.c @@ -194,6 +194,7 @@ int main(int argc, char **argv) int nb_rb_set = 0; int sf; + int threequarter_fs=0; opp_enabled=1; // to enable the time meas cpu_freq_GHz = (double)get_cpu_freq_GHz(); @@ -203,7 +204,7 @@ int main(int argc, char **argv) logInit(); - while ((c = getopt (argc, argv, "hapZbm:n:Y:X:x:s:w:e:q:d:D:O:c:r:i:f:y:c:oA:C:R:g:N:l:S:T:QB:PI:L")) != -1) { + while ((c = getopt (argc, argv, "hapZEbm:n:Y:X:x:s:w:e:q:d:D:O:c:r:i:f:y:c:oA:C:R:g:N:l:S:T:QB:PI:L")) != -1) { switch (c) { case 'a': channel_model = AWGN; @@ -373,6 +374,10 @@ int main(int argc, char **argv) cyclic_shift = atoi(optarg); break; + case 'E': + threequarter_fs=1; + break; + case 'N': N0 = atoi(optarg); break; @@ -470,6 +475,7 @@ int main(int argc, char **argv) 0, tdd_config, N_RB_DL, + threequarter_fs, osf, 0); From f1298f804a4c98eb9d6e6dcb3504d7e81091be74 Mon Sep 17 00:00:00 2001 From: kaltenbe Date: Tue, 16 Feb 2016 15:50:02 +0100 Subject: [PATCH 24/55] added CMakeLists.txt to LMSSDR/lmsSDR --- .../USERSPACE/LIB/lmsSDR/CMakeLists.txt | 58 +++++++++++++++++++ 1 file changed, 58 insertions(+) create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/CMakeLists.txt diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/CMakeLists.txt b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/CMakeLists.txt new file mode 100644 index 0000000000..0225e1d4d6 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/CMakeLists.txt @@ -0,0 +1,58 @@ +cmake_minimum_required(VERSION 2.8) +set(CMAKE_CONFIGURATION_TYPES "Debug;Release" CACHE TYPE INTERNAL FORCE) +project("matlab_StreamDLL") +#include modules for finding CyAPI +set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} "${CMAKE_SOURCE_DIR}/cmake/Modules/") +cmake_policy(SET CMP0015 OLD) +if(${CMAKE_MAJOR_VERSION} GREATER 2) + cmake_policy(SET CMP0043 NEW) +endif() +ADD_DEFINITIONS(-D_CRT_SECURE_NO_WARNINGS) +if(CMAKE_COMPILER_IS_GNUCXX) + SET(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++0x -fPIC") +endif() + +# Add sub-directories +add_subdirectory(LMS_StreamBoard) +include_directories(LMS_StreamBoard) +add_subdirectory(connectionManager) +include_directories(connectionManager) + +set(BINARY_OUTPUT_DIR "${CMAKE_BINARY_DIR}/bin") + +if (MSVC) + SET( MSVC_MULTITHREAD_COMPILE_FLAGS "/MP") + SET( CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${MSVC_MULTITHREAD_COMPILE_FLAGS}" ) +endif(MSVC) + +set(Library_file_list LMS_SDR.cpp ) + +set(BUILD_STATIC_LIB OFF CACHE BOOL "Build static or dynamic library") +if( BUILD_STATIC_LIB ) + add_library(LMS_SDR STATIC ${Library_file_list}) +else() + add_library(LMS_SDR SHARED ${Library_file_list}) +endif(BUILD_STATIC_LIB) + +set(AUTO_UPDATE_VERSION OFF CACHE BOOL "Uses python script to increment version") +if(AUTO_UPDATE_VERSION) + add_custom_target(updateVersion ALL COMMAND python ${CMAKE_CURRENT_SOURCE_DIR}/auto_version.py WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}) + add_dependencies(LMS_SDR updateVersion) +endif() + +target_link_libraries(LMS_SDR + LMS_StreamBoard + ${CYAPI_LIBRARIES} + ) + +if(WIN32) + find_package(CyAPI REQUIRED) + LINK_DIRECTORIES(${CYAPI_LIBRARIES}) + include_directories(${CYAPI_INCLUDE_DIRS}) + set(CONNECTION_MANAGER_LIBS ${CYAPI_LIBRARIES} SetupAPI) +endif() +if(UNIX) + set(CONNECTION_MANAGER_LIBS usb-1.0 -lpthread) +endif() + +target_link_libraries(LMS_SDR ${CONNECTION_MANAGER_LIBS}) From c5bdcd5cb3a4dcc69b57239226bc86c4f82872cb Mon Sep 17 00:00:00 2001 From: kaltenbe Date: Tue, 16 Feb 2016 15:54:19 +0100 Subject: [PATCH 25/55] added missing directory to lms7002m --- .../LIB/lms7002m/cpp-feather-ini-parser/INI.h | 639 ++++++++++++++ .../lms7002m/cpp-feather-ini-parser/LICENSE | 21 + .../lms7002m/cpp-feather-ini-parser/README.md | 47 + .../example/example.cpp | 130 +++ .../cpp-feather-ini-parser/example/file.ini | 5 + .../example/file_ints.ini | 400 +++++++++ .../cpp-feather-ini-parser/example/merge.ini | 5 + .../example/project.cbp | 57 ++ .../example/project.depend | 802 ++++++++++++++++++ 9 files changed, 2106 insertions(+) create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/cpp-feather-ini-parser/INI.h create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/cpp-feather-ini-parser/LICENSE create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/cpp-feather-ini-parser/README.md create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/cpp-feather-ini-parser/example/example.cpp create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/cpp-feather-ini-parser/example/file.ini create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/cpp-feather-ini-parser/example/file_ints.ini create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/cpp-feather-ini-parser/example/merge.ini create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/cpp-feather-ini-parser/example/project.cbp create mode 100644 targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/cpp-feather-ini-parser/example/project.depend diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/cpp-feather-ini-parser/INI.h b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/cpp-feather-ini-parser/INI.h new file mode 100644 index 0000000000..de54b4e7b4 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/cpp-feather-ini-parser/INI.h @@ -0,0 +1,639 @@ +/* + Feather INI Parser - 1.40 + You are free to use this however you wish. + + If you find a bug, please attept to debug the cause. + Post your environment details and the cause or fix in the issues section of GitHub. + + Written by Turbine. + + Website: + https://github.com/Turbine1991/feather-ini-parser + http://code.google.com/p/feather-ini-parser/downloads + + Help: + Bundled example & readme. + http://code.google.com/p/feather-ini-parser/wiki/Tutorials +*/ + +#pragma once + +#include +#include +#include +#include +#include +#include + +#define FINI_SAFE +#define FINI_BUFFER_SIZE 128 + +#if __cplusplus >= 201103L + #include + #define FINI_CPP11 + #define ALLOCATE_SECTIONS 100 + #define ALLOCATE_KEYS 5 +#else + #include +#endif + +#ifdef FINI_WIDE_SUPPORT + #include + + typedef std::wstringstream fini_sstream_t; + typedef std::wstring fini_string_t; + typedef wchar_t fini_char_t; + typedef std::wifstream fini_ifstream_t; + typedef std::wofstream fini_ofstream_t; + + #define fini_strlen(a) wcslen(a) + #define fini_strncpy(a, b) wcscpy(a, b) + #define fini_strncpy(a, b, c) wcsncpy(a, b, c) + #define fini_strtok(a, b) wcstok(a, b) + + #define _T(x) L ##x +#else + #include + + typedef std::stringstream fini_sstream_t; + typedef std::string fini_string_t; + typedef char fini_char_t; + typedef std::ifstream fini_ifstream_t; + typedef std::ofstream fini_ofstream_t; + + #define fini_strlen(a) strlen(a) + #define fini_strcpy(a, b) strcpy(a, b) + #define fini_strncpy(a, b, c) strncpy(a, b, c) + #define fini_strtok(a, b) strtok(a, b) + + #define _T(x) x +#endif + +#define CHAR_SIZE sizeof(fini_char_t) + +///Simple converter using templates and streams to effectively required for the flexibility of handling native types +class Converters +{ +public: + template + static T Convert(U value); + template + static void GetLine(fini_sstream_t& out, T& value); + static void GetLine(fini_sstream_t& out, fini_string_t& value); + template + static size_t GetDataSize(T& value); + static size_t GetDataSize(fini_string_t value); +}; + +/// +template + class INI +{ +public: + typedef T section_t; + typedef U key_t; + typedef V value_t; + typedef INI ini_t; + +///Type definition declarations +#ifdef FINI_CPP11 + typedef typename std::unordered_map keys_t; + typedef typename std::unordered_map sections_t; +#else + typedef typename std::map keys_t; + typedef typename std::map sections_t; +#endif + + typedef typename keys_t::iterator keysit_t; + typedef typename sections_t::iterator sectionsit_t; + + typedef typename std::pair keyspair_t; + typedef typename std::pair sectionspair_t; + + typedef char data_t; + + enum source_e {SOURCE_FILE, SOURCE_MEMORY}; + +///Data members + std::string filename; + data_t* data; + size_t dataSize; + keys_t* current; + sections_t sections; + source_e source; + +///Constuctor/Destructor + //Specify the filename to associate and whether to parse immediately + INI(const std::string filename, bool doParse): filename(filename) + { + init(SOURCE_FILE, doParse); + } + + //Used for loading INI from memory + INI(void* data, size_t dataSize, bool doParse): data((data_t*)data), dataSize(dataSize) + { + init(SOURCE_MEMORY, doParse); + } + + ~INI() + { + clear(); + } + +///Access Content + //Provide bracket access to section contents + keys_t& operator[](section_t section) + { + #ifdef FINI_SAFE + if (!sections[section]) + sections[section] = new keys_t; + #endif + + return *sections[section]; + } + + //Create a new section and select it + bool create(const section_t section) + { + if (select(section)) + return false; + + current = new keys_t; + sections[section] = current; + + reserveKeys(current); + + return true; + } + + //Select a section for performing operations + bool select(const section_t section) + { + sectionsit_t sectionsit = sections.find(section); + if (sectionsit == sections.end()) + return false; + + current = sectionsit->second; + + return true; + } + +///Set + //Assign a value for key under the selected section + bool set(const key_t key, const value_t value) + { + if (current == NULL) + return false; + + (*current)[key] = value; + + return true; + } + + template + bool set(const W key, const X value) + { return set(Converters::Convert(key), Converters::Convert(value)); } + +///Get + value_t get(const key_t key, value_t def = value_t()) + { + keysit_t it = current->find(key); + if (current == NULL || it == current->end()) + return def; + + return it->second; + } + + value_t get(const section_t section, const key_t key, value_t def) + { + if (!select(section)) + return def; + + return get(key, def); + } + + template + X get(const W key, const X def = value_t()) + { return Converters::Convert(get(Converters::Convert(key), Converters::Convert(def))); } + + template + fini_string_t get(const W key, const fini_char_t* def = _T("")) //Handle C string default value without casting + { return Converters::Convert(get(Converters::Convert(key), Converters::Convert(def))); } + + template + Y get(const W section, const X key, const Y def) + { return Converters::Convert(get(Converters::Convert(section), Converters::Convert(key), Converters::Convert(def))); } + + template + fini_string_t get(const W section, const X key, const fini_char_t* def) //Handle C string default value without casting + { return Converters::Convert(Converters::Convert(section), get(Converters::Convert(key), Converters::Convert(def))); } + +///Functions + void parse(std::istream& file) + { + fini_char_t line[FINI_BUFFER_SIZE]; + bool first = true; + fini_sstream_t out; + + while(!file.eof()) + { + file.getline(line, FINI_BUFFER_SIZE); + + if (first) + { + first = false; + if (line[0] == 0xEF) //Allows handling of UTF-16/32 documents + { + memmove(line, line + (CHAR_SIZE * 3), CHAR_SIZE * (FINI_BUFFER_SIZE - 3)); + return; + } + } + + nake(line); + + if (line[0]) + { + size_t len = fini_strlen(line); + if (len > 0 && !((len >= 2 && (line[0] == '/' && line[1] == '/')) || (len >= 1 && line[0] == '#'))) //Ignore comment and empty lines + { + if (line[0] == '[') //Section + { + section_t section; + size_t length = fini_strlen(line) - 2; //Without section brackets + while(isspace(line[length + 1])) //Leave out any additional new line characters, not "spaces" as the name suggests + --length; + + fini_char_t* ssection = (fini_char_t*)calloc(CHAR_SIZE, length + 1); + fini_strncpy(ssection, line + 1, length); //Count after first bracket + + current = new keys_t; + + out << ssection; + free(ssection); + Converters::GetLine(out, section); + + sections[section] = current; + } + else //Key + { + key_t key; + value_t value; + + fini_char_t* skey; + fini_char_t* svalue; + + skey = fini_strtok(line, _T("=")); + svalue = fini_strtok(NULL, _T("\n")); + + if (skey && svalue) + { + size_t index = 0; //Without section brackets + while(isspace(skey[index])) //Leave out any additional new line characters, not "spaces" as the name suggests + index++; + + if (index != 0) //Has preceeding white space + fini_strcpy(skey, skey + index); + + out << skey; + + Converters::GetLine(out, key); + + out.clear(); + out.str(fini_string_t()); + + out << svalue; + Converters::GetLine(out, value); + + if (value != value_t()) + (*current)[key] = value; + } + } + + out.clear(); + out.str(fini_string_t()); //Clear existing stream; + } + } + } + } + + //Parse an INI's contents into memory from the filename given during construction + bool parse() + { + switch(source) + { + case SOURCE_FILE: { + fini_ifstream_t file(filename.c_str()); + + if (!file.is_open()) + return false; + + parse(file); + + file.close(); + } + break; + + case SOURCE_MEMORY: { + std::stringstream sstream; + sstream.rdbuf()->pubsetbuf(data, dataSize); + + parse(sstream); + } + break; + } + + return true; + } + + bool parseBinary() + { + fini_ifstream_t file(filename.c_str(), std::ios::binary); + if (!file.is_open()) + return false; + + size_t sectionCount; + size_t keyCount; + key_t key; + value_t value; + section_t section; + + //file.read((fini_char_t*)§ionCount, sizeof(sectionCount)); + file >> sectionCount; + + for(size_t i = 0; i < sectionCount; i++) + { + if (i > 0) + file.seekg(1 + file.tellg()); + + file.read((fini_char_t*)&keyCount, sizeof(keyCount)); + file >> section; + + create(section); + + for(size_t j = 0; j < keyCount; j++) + { + file >> key; + file >> value; + set(key, value); + } + } + + file.close(); + + return true; + } + + //Clear the contents from memory + void clear() + { + clean(); + sections.clear(); + } + +///Output + //Save from memory into file + bool save(const std::string filename = "") + { + if (!hasFileAssociation(filename)) + return false; + + fini_ofstream_t file(((filename == "")? this->filename: filename).c_str(), std::ios::trunc); + if (!file.is_open()) + return false; + + //Loop through sections + for(typename INI::sectionsit_t i = sections.begin(); i != sections.end(); i++) + { + if (i->second->size() == 0) //No keys/values in section, skip to next + continue; + + //Write section + const fini_string_t temp = makeSection(i->first); + const fini_char_t* line = temp.c_str(); + file.write(line, fini_strlen(line)); + + for(typename INI::keysit_t j = i->second->begin(); j != i->second->end(); j++) + { + //Write key and value + const fini_string_t temp = makeKeyValue(j->first, j->second); + const fini_char_t* line = temp.c_str(); + file.write(line, fini_strlen(line)); + } + } + + file.close(); + + return true; + } + + //Saves it without any conventional INI formatting characters, however it only uses string streams + bool saveBinary(const std::string filename = "") + { + if (!hasFileAssociation(filename)) + return false; + + fini_ofstream_t file(((filename == "")? this->filename: filename).c_str(), std::ios::trunc | std::ios::binary); + if (!file.is_open()) + return false; + + size_t sectionCount = sections.size(); + size_t keyCount; + + file.write((fini_char_t*)§ionCount, sizeof(sectionCount)); + + //Loop through sections + for(typename INI::sectionsit_t i = sections.begin(); i != sections.end(); i++) + { + keyCount = i->second->size(); + file.write((fini_char_t*)&keyCount, sizeof(keyCount)); + + file << i->first << std::endl; + + for(typename INI::keysit_t j = i->second->begin(); j != i->second->end(); j++) + { + file << j->first << std::endl; + file << j->second << std::endl; + } + } + + file.close(); + + return true; + } + + //Saves it as a true binary file, intended to replace the existing one. Don't bother using it with all strings. + bool saveBinaryExperimental(std::string filename = "") + { + if (!hasFileAssociation(filename)) + return false; + + fini_ofstream_t file(((filename == "")? this->filename: filename).c_str(), std::ios::trunc | std::ios::binary); + if (!file.is_open()) + return false; + + size_t sectionCount = sections.size(); + size_t keyCount; + + file.write((fini_char_t*)§ionCount, sizeof(sectionCount)); + + //Loop through sections + for(typename INI::sectionsit_t i = sections.begin(); i != sections.end(); i++) + { + keyCount = i->second->size(); + file.write((fini_char_t*)&keyCount, sizeof(keyCount)); + + file.write((fini_char_t*)&i->first, Converters::GetDataSize(i->first)); + + for(typename INI::keysit_t j = i->second->begin(); j != i->second->end(); j++) + { + file.write((fini_char_t*)&j->first, Converters::GetDataSize(j->first)); + file.write((fini_char_t*)&j->second, Converters::GetDataSize(j->second)); + } + } + + file.close(); + + return true; + } + + //Alows another INI's contents to be insert into another, with the ability to retain the original values + void merge(ini_t& other, bool retainValues = true) + { + for(typename INI::sectionsit_t i = other.sections.begin(); i != other.sections.end(); i++) + { + if (!select(i->first)) //Create and insert all key values into a missing section + { + keys_t* keys = new keys_t(*i->second); + sections.insert(std::make_pair(i->first, keys)); + } + else + { + for(typename INI::keysit_t j = i->second->begin(); j != i->second->end(); j++) + { + keysit_t it = current->find(j->first); + if (it == current->end()) + current->insert(std::make_pair(j->first, j->second)); + else if (!retainValues) + it->second = j->second; + } + } + } + } + +private: +///Functions + //Init the INI in with values set by constructor + void init(source_e source, bool doParse) + { + this->source = source; + + reserveSections(); + if (doParse) + parse(); + } + + //Clean the contents for descruction + void clean() + { + for(sectionsit_t i = sections.begin(); i != sections.end(); i++) + delete i->second; + + current = NULL; + } + + //Make any alterations to the raw line + void nake(const fini_char_t*) //Strip the line of any non-interpretable characters + { + + } + + void reserveSections() + { + #ifdef FINI_CPP11 + sections.reserve(ALLOCATE_SECTIONS); + #endif + } + + void reserveKeys(keys_t* current) + { + #ifdef FINI_CPP11 + current->reserve(ALLOCATE_KEYS); + #endif + } + + bool hasFileAssociation(std::string filename) + { + if (source == SOURCE_MEMORY && filename == "") //No association to a file + return false; + + return true; + } + +///Output + //Creates a section as a string + fini_string_t makeSection(const section_t& section) + { + fini_sstream_t line; + line << '[' << section << ']' << std::endl; + + return line.str(); + } + + //Creates a key and a value as a string + fini_string_t makeKeyValue(const key_t& key, const value_t& value) + { + fini_sstream_t line; + line << key << '=' << value << std::endl; + + return line.str(); + } +}; + +///Definitions +template + inline T Converters::Convert(U value) +{ + fini_sstream_t sout; + T result; + + sout << value; + sout >> result; + + sout.str(fini_string_t()); + + return result; +} + +template <> + inline fini_string_t Converters::Convert(fini_string_t value) +{ + return value; +} + +template <> + inline fini_string_t Converters::Convert(const fini_char_t* value) +{ + return value; +} + +template + inline void Converters::GetLine(fini_sstream_t& out, T& value) +{ + out >> value; +} + +inline void Converters::GetLine(fini_sstream_t& out, fini_string_t& value) +{ + std::getline(out, value); +} + +template + inline size_t Converters::GetDataSize(T& value) +{ + return sizeof(value); +} + +inline size_t Converters::GetDataSize(fini_string_t value) +{ + return value.size() + 1; +} diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/cpp-feather-ini-parser/LICENSE b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/cpp-feather-ini-parser/LICENSE new file mode 100644 index 0000000000..7d961cc6e5 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/cpp-feather-ini-parser/LICENSE @@ -0,0 +1,21 @@ +The MIT License (MIT) + +Copyright (c) 2014 Turbine1991 + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. \ No newline at end of file diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/cpp-feather-ini-parser/README.md b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/cpp-feather-ini-parser/README.md new file mode 100644 index 0000000000..f1245971cd --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/cpp-feather-ini-parser/README.md @@ -0,0 +1,47 @@ +feather-ini-parser +================== + +Simple like your girlfriend, fast, lightweight, header, portable INI parser for ANSI C++. + +Why use feather-ini-parser? It's a fast, intuitive, uses C++, supports native data types, wide char support (enable), converting to data types simply by setting a default value or providing the type as a template parameter. + +##Methods + +Statement | Return Type +------------- | ------------- +ini(filename, doParse)|constructor +ini(data, dataSize, doParse)|constructor +ini.parse()|bool +ini.merge(other INI, retainValues)|void +ini.create(section)|bool +ini.select(section)|bool +ini.set(key, value)|bool +ini.get(key, dvalue = value_t())|dvalue_t +ini.save(filename = "")|bool +ini.clear()|bool +ini[section][key]|value_t& +ini[section]|keys_t& + +##Example +``` +#include +#include "INI.h" + +using namespace std; +``` +... +``` +typedef INI<> ini_t; +//or +//typedef INI ini_t; + +ini_t ini("filename.ini", true); +ini.create("section1"); //Create and select section1 +ini.set("key", "value"); +cout << ini.get("keynumeric", -1) << endl; +ini["section2"]["key"] = "value"; +ini.save(); +``` + +##More +Please see the example .cpp file and Code::Blocks .cbp project for a compilable GCC and VSC++ example. Additionally includes enabling wide char support and iterating through contents. diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/cpp-feather-ini-parser/example/example.cpp b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/cpp-feather-ini-parser/example/example.cpp new file mode 100644 index 0000000000..462dd241dc --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/cpp-feather-ini-parser/example/example.cpp @@ -0,0 +1,130 @@ +#include +#include +#include +#include "../INI.h" + +using namespace std; + +void centerString(string str); //Printing to console +std::string getStringFromFile(const std::string& path); //Source for data loading from memory. + +int main() +{ + ///Declare + typedef INI<> ini_t; //Makes things shorter/easier to write + //or + //typedef INI ini_t; //Equivelant to previous line when wide characters are disabled + ini_t ini("file.ini", true); //File to open/default save filename. The constuctor is set to parse by default, unless specified as false + + ///Manipulate and access contents + centerString("########## Access & Manipulate Contents ##########"); + + //Common usage + ini.create("Section 1"); + ini.create("Section 2"); + ini.get("Key1", "DefaultValue"); + ini.select("Section 1"); + ini.set("Key2", "Value"); + ini.save(); //Save contents to file, optional filename parameter available + ini.clear(); //Clear INI contents from memory + + //Extended usage + ini["Section Name"]["Key"] = "Value"; //You are not required to create a section first + + ini.create("Section1"); //Also selects as current section + ini.create("Section2"); //Current + + ini.set("Key1", "Value1"); //Added pair under section "Section2" + + ini.select("Section1"); //Current + cout << ini.get("Key1", "-1") << endl; //Returns "-1" as no key exists, no default will return NULL for data type, eg int() is 0 + + ini.select("Section2"); + ini.set("Key1", "1.123"); + cout << ini.get("Key1", -1.0) << endl; //Return value as double + ini.set(123, 123); //Will convert to provided INI data type for key/value, in this case string for both + + ini.save(); + ini.clear(); + ini.parse(); //Parses file into objects in memory + + cout << ini["Section2"]["Key1"] << endl; //Returns "Value1", slightly more overhead involved seeking section, avoid using excessively + + ///Iterate through sections and keys for both C++11 and C++98 + centerString("########## Iterate Contents ##########"); + +#ifdef FINI_CPP11 + for(auto i: ini.sections) + { + cout << "[" << i.first << "]" << endl; + + //for(auto j = i.second->begin(); j != i.second->end(); j++) + for(auto j: *i.second) + { + cout << " " << j.first << "=" << j.second << endl; + } + } +#else + for(ini_t::sectionsit_t i = ini.sections.begin(); i != ini.sections.end(); i++) + { + //Section name as ini_t::section_t + cout << i->first << endl; + + if (i->second->size() == 0) //No keys/values in section, skip to next + continue; + + for(ini_t::keysit_t j = i->second->begin(); j != i->second->end(); j++) + { + //Name as ini_t::key_t & Value as ini_t::key_t + cout << " " << j->first << "=" << j->second << endl; + } + } +#endif + +///Example with different data types + typedef INI ini_int_t; //Makes things shorter/easier to write + ini_int_t ini_int("file_ints.ini", false); //File to open/default save filename. The constuctor is set to parse by default, unless specified as false + for(int i = 1; i <= 200; i++) + { + ini_int.create(i); //Section + ini_int.set("Key", i / 2.f); + } + + ini_int.save(); + +///Wide char support example (please define FINI_WIDE_SUPPORT in project) + /* + ini_t ini_w("file.ini", true); + wcout << ini_w[L"Section2"][L"Key1"] << endl; + */ + +///Load from memory + std::string str = getStringFromFile("config/test.ini"); //Allows us to tap into a source for the purpose of this example + + ini_t ini_mem((void*)str.c_str(), str.size(), true); //This is the line which parses data from memory + +///Merge contents and keep values + ini_t inid("file.ini", true); + ini_t inis("merge.ini", true); + inid.merge(inis, true); + inid.save("merged.ini"); + + return EXIT_SUCCESS; +} + +void centerString(string str) +{ + const char* s = str.c_str(); + int l = strlen(s); + int pos = (int)((80 - l) / 2); + for(int i = 0; i < pos; i++) + cout << " "; + cout << s << endl; +} + +std::string getStringFromFile(const std::string& path) { + std::ostringstream buf; + std::ifstream input (path.c_str()); + buf << input.rdbuf(); + return buf.str(); +} diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/cpp-feather-ini-parser/example/file.ini b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/cpp-feather-ini-parser/example/file.ini new file mode 100644 index 0000000000..e1c485ba2a --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/cpp-feather-ini-parser/example/file.ini @@ -0,0 +1,5 @@ +[Section2] +123=123 +Key1=1.123 +[Section Name] +Key=Value diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/cpp-feather-ini-parser/example/file_ints.ini b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/cpp-feather-ini-parser/example/file_ints.ini new file mode 100644 index 0000000000..3d71e76cae --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/cpp-feather-ini-parser/example/file_ints.ini @@ -0,0 +1,400 @@ +[200] +Key=100 +[199] +Key=99.5 +[198] +Key=99 +[197] +Key=98.5 +[196] +Key=98 +[195] +Key=97.5 +[194] +Key=97 +[193] +Key=96.5 +[192] +Key=96 +[191] +Key=95.5 +[190] +Key=95 +[189] +Key=94.5 +[188] +Key=94 +[187] +Key=93.5 +[186] +Key=93 +[185] +Key=92.5 +[184] +Key=92 +[183] +Key=91.5 +[182] +Key=91 +[181] +Key=90.5 +[180] +Key=90 +[179] +Key=89.5 +[178] +Key=89 +[177] +Key=88.5 +[176] +Key=88 +[175] +Key=87.5 +[174] +Key=87 +[173] +Key=86.5 +[172] +Key=86 +[171] +Key=85.5 +[170] +Key=85 +[169] +Key=84.5 +[168] +Key=84 +[167] +Key=83.5 +[166] +Key=83 +[165] +Key=82.5 +[164] +Key=82 +[163] +Key=81.5 +[162] +Key=81 +[161] +Key=80.5 +[160] +Key=80 +[159] +Key=79.5 +[158] +Key=79 +[157] +Key=78.5 +[156] +Key=78 +[155] +Key=77.5 +[154] +Key=77 +[153] +Key=76.5 +[152] +Key=76 +[151] +Key=75.5 +[150] +Key=75 +[149] +Key=74.5 +[148] +Key=74 +[147] +Key=73.5 +[146] +Key=73 +[145] +Key=72.5 +[144] +Key=72 +[143] +Key=71.5 +[142] +Key=71 +[141] +Key=70.5 +[140] +Key=70 +[139] +Key=69.5 +[138] +Key=69 +[137] +Key=68.5 +[136] +Key=68 +[135] +Key=67.5 +[134] +Key=67 +[133] +Key=66.5 +[132] +Key=66 +[131] +Key=65.5 +[130] +Key=65 +[129] +Key=64.5 +[128] +Key=64 +[127] +Key=63.5 +[126] +Key=63 +[125] +Key=62.5 +[124] +Key=62 +[123] +Key=61.5 +[122] +Key=61 +[121] +Key=60.5 +[120] +Key=60 +[119] +Key=59.5 +[118] +Key=59 +[117] +Key=58.5 +[116] +Key=58 +[115] +Key=57.5 +[114] +Key=57 +[113] +Key=56.5 +[112] +Key=56 +[111] +Key=55.5 +[110] +Key=55 +[109] +Key=54.5 +[108] +Key=54 +[107] +Key=53.5 +[106] +Key=53 +[105] +Key=52.5 +[104] +Key=52 +[103] +Key=51.5 +[1] +Key=0.5 +[2] +Key=1 +[3] +Key=1.5 +[4] +Key=2 +[5] +Key=2.5 +[6] +Key=3 +[7] +Key=3.5 +[8] +Key=4 +[9] +Key=4.5 +[10] +Key=5 +[11] +Key=5.5 +[12] +Key=6 +[13] +Key=6.5 +[14] +Key=7 +[15] +Key=7.5 +[16] +Key=8 +[17] +Key=8.5 +[18] +Key=9 +[19] +Key=9.5 +[20] +Key=10 +[21] +Key=10.5 +[22] +Key=11 +[23] +Key=11.5 +[24] +Key=12 +[25] +Key=12.5 +[26] +Key=13 +[27] +Key=13.5 +[28] +Key=14 +[29] +Key=14.5 +[30] +Key=15 +[31] +Key=15.5 +[32] +Key=16 +[33] +Key=16.5 +[34] +Key=17 +[35] +Key=17.5 +[36] +Key=18 +[37] +Key=18.5 +[38] +Key=19 +[39] +Key=19.5 +[40] +Key=20 +[41] +Key=20.5 +[42] +Key=21 +[43] +Key=21.5 +[44] +Key=22 +[45] +Key=22.5 +[46] +Key=23 +[47] +Key=23.5 +[48] +Key=24 +[49] +Key=24.5 +[50] +Key=25 +[51] +Key=25.5 +[52] +Key=26 +[53] +Key=26.5 +[54] +Key=27 +[55] +Key=27.5 +[56] +Key=28 +[57] +Key=28.5 +[58] +Key=29 +[59] +Key=29.5 +[60] +Key=30 +[61] +Key=30.5 +[62] +Key=31 +[63] +Key=31.5 +[64] +Key=32 +[65] +Key=32.5 +[66] +Key=33 +[67] +Key=33.5 +[68] +Key=34 +[69] +Key=34.5 +[70] +Key=35 +[71] +Key=35.5 +[72] +Key=36 +[73] +Key=36.5 +[74] +Key=37 +[75] +Key=37.5 +[76] +Key=38 +[77] +Key=38.5 +[78] +Key=39 +[79] +Key=39.5 +[80] +Key=40 +[81] +Key=40.5 +[82] +Key=41 +[83] +Key=41.5 +[84] +Key=42 +[85] +Key=42.5 +[86] +Key=43 +[87] +Key=43.5 +[88] +Key=44 +[89] +Key=44.5 +[90] +Key=45 +[91] +Key=45.5 +[92] +Key=46 +[93] +Key=46.5 +[94] +Key=47 +[95] +Key=47.5 +[96] +Key=48 +[97] +Key=48.5 +[98] +Key=49 +[99] +Key=49.5 +[100] +Key=50 +[101] +Key=50.5 +[102] +Key=51 diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/cpp-feather-ini-parser/example/merge.ini b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/cpp-feather-ini-parser/example/merge.ini new file mode 100644 index 0000000000..dfdc381084 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/cpp-feather-ini-parser/example/merge.ini @@ -0,0 +1,5 @@ +[NewSection] +Key=Value +[Section2] +NewKey=Value +123=456 \ No newline at end of file diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/cpp-feather-ini-parser/example/project.cbp b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/cpp-feather-ini-parser/example/project.cbp new file mode 100644 index 0000000000..913928a115 --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/cpp-feather-ini-parser/example/project.cbp @@ -0,0 +1,57 @@ + + + + + + diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/cpp-feather-ini-parser/example/project.depend b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/cpp-feather-ini-parser/example/project.depend new file mode 100644 index 0000000000..02c743092d --- /dev/null +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/cpp-feather-ini-parser/example/project.depend @@ -0,0 +1,802 @@ +# depslib dependency file v1.0 +1399614205 source:d:\projects\feather-ini-parser\example\example.cpp + + + + "../INI.h" + +1399625159 d:\projects\feather-ini-parser\ini.h + + + + + + + + + + + +1374412936 c:\program files (x86)\microsoft visual studio 12.0\vc\include\iostream + + +1374726946 c:\program files (x86)\microsoft visual studio 12.0\vc\include\istream + + +1374726946 c:\program files (x86)\microsoft visual studio 12.0\vc\include\ostream + + +1374726946 c:\program files (x86)\microsoft visual studio 12.0\vc\include\ios + + +1374410776 c:\program files (x86)\microsoft visual studio 12.0\vc\include\xlocnum + + + + + + +1374410776 c:\program files (x86)\microsoft visual studio 12.0\vc\include\climits + + + +1374726946 c:\program files (x86)\microsoft visual studio 12.0\vc\include\yvals.h + + + + + +1374410776 c:\program files (x86)\microsoft visual studio 12.0\vc\include\xkeycheck.h + +1374412934 c:\program files (x86)\microsoft visual studio 12.0\vc\include\crtdefs.h + + + + +1374412934 c:\program files (x86)\microsoft visual studio 12.0\vc\include\sal.h + "codeanalysis\sourceannotations.h" + + +1374412934 c:\program files (x86)\microsoft visual studio 12.0\vc\include\codeanalysis\sourceannotations.h + +1374410776 c:\program files (x86)\microsoft visual studio 12.0\vc\include\concurrencysal.h + +1374412934 c:\program files (x86)\microsoft visual studio 12.0\vc\include\vadefs.h + + +1379495880 c:\program files (x86)\microsoft visual studio 12.0\vc\include\use_ansi.h + +1374412934 c:\program files (x86)\microsoft visual studio 12.0\vc\include\crtwrn.h + + +1374412934 c:\program files (x86)\microsoft visual studio 12.0\vc\include\limits.h + + +1375351090 c:\program files (x86)\microsoft visual studio 12.0\vc\include\cmath + + + + + + +1379495880 c:\program files (x86)\microsoft visual studio 12.0\vc\include\math.h + + +1379495880 c:\program files (x86)\microsoft visual studio 12.0\vc\include\xtgmath.h + + +1374412938 c:\program files (x86)\microsoft visual studio 12.0\vc\include\xtr1common + + +1375351090 c:\program files (x86)\microsoft visual studio 12.0\vc\include\cstdio + + + + +1374410776 c:\program files (x86)\microsoft visual studio 12.0\vc\include\stdio.h + + + +1374726946 c:\program files (x86)\microsoft visual studio 12.0\vc\include\swprintf.inl + + +1375351090 c:\program files (x86)\microsoft visual studio 12.0\vc\include\cstdlib + + + + +1374410776 c:\program files (x86)\microsoft visual studio 12.0\vc\include\stdlib.h + + + +1374412936 c:\program files (x86)\microsoft visual studio 12.0\vc\include\streambuf + + +1374726946 c:\program files (x86)\microsoft visual studio 12.0\vc\include\xiosbase + + + + +1374726946 c:\program files (x86)\microsoft visual studio 12.0\vc\include\xlocale + + + + + + + + +1375351090 c:\program files (x86)\microsoft visual studio 12.0\vc\include\cstring + + + + +1374410776 c:\program files (x86)\microsoft visual studio 12.0\vc\include\string.h + + +1374412936 c:\program files (x86)\microsoft visual studio 12.0\vc\include\stdexcept + + + +1374412936 c:\program files (x86)\microsoft visual studio 12.0\vc\include\exception + + + + + +1374412938 c:\program files (x86)\microsoft visual studio 12.0\vc\include\xstddef + + + + + +1374412936 c:\program files (x86)\microsoft visual studio 12.0\vc\include\cstddef + + + + +1374410776 c:\program files (x86)\microsoft visual studio 12.0\vc\include\stddef.h + + +1374412936 c:\program files (x86)\microsoft visual studio 12.0\vc\include\initializer_list + + +1374412934 c:\program files (x86)\microsoft visual studio 12.0\vc\include\eh.h + + +1374412934 c:\program files (x86)\microsoft visual studio 12.0\vc\include\malloc.h + + +1374412938 c:\program files (x86)\microsoft visual studio 12.0\vc\include\xstring + + +1374726946 c:\program files (x86)\microsoft visual studio 12.0\vc\include\xmemory0 + + + + + + + + +1374412936 c:\program files (x86)\microsoft visual studio 12.0\vc\include\limits + + + + + + + +1374410776 c:\program files (x86)\microsoft visual studio 12.0\vc\include\ymath.h + + +1374412936 c:\program files (x86)\microsoft visual studio 12.0\vc\include\cfloat + + + +1374410776 c:\program files (x86)\microsoft visual studio 12.0\vc\include\float.h + + + +1375351090 c:\program files (x86)\microsoft visual studio 12.0\vc\include\cwchar + + + + +1374726946 c:\program files (x86)\microsoft visual studio 12.0\vc\include\wchar.h + + + + +1374412934 c:\program files (x86)\microsoft visual studio 12.0\vc\include\wtime.inl + +1374412936 c:\program files (x86)\microsoft visual studio 12.0\vc\include\new + + +1374726946 c:\program files (x86)\microsoft visual studio 12.0\vc\include\xutility + + + + +1374412938 c:\program files (x86)\microsoft visual studio 12.0\vc\include\utility + + + + +1374412936 c:\program files (x86)\microsoft visual studio 12.0\vc\include\iosfwd + + + + + + +1374412934 c:\program files (x86)\microsoft visual studio 12.0\vc\include\crtdbg.h + + +1374726946 c:\program files (x86)\microsoft visual studio 12.0\vc\include\type_traits + + + +1374726946 c:\program files (x86)\microsoft visual studio 12.0\vc\include\xrefwrap + +1374412938 c:\program files (x86)\microsoft visual studio 12.0\vc\include\xatomic0.h + + +1379495880 c:\program files (x86)\microsoft visual studio 12.0\vc\include\intrin.h + + + + + + + + +1374412934 c:\program files (x86)\microsoft visual studio 12.0\vc\include\setjmp.h + + + +1374412934 c:\program files (x86)\microsoft visual studio 12.0\vc\include\setjmpex.h + + +1374412934 c:\program files (x86)\microsoft visual studio 12.0\vc\include\immintrin.h + + +1374412934 c:\program files (x86)\microsoft visual studio 12.0\vc\include\wmmintrin.h + + +1374412934 c:\program files (x86)\microsoft visual studio 12.0\vc\include\nmmintrin.h + + +1374412934 c:\program files (x86)\microsoft visual studio 12.0\vc\include\smmintrin.h + + +1374412934 c:\program files (x86)\microsoft visual studio 12.0\vc\include\tmmintrin.h + + +1374412934 c:\program files (x86)\microsoft visual studio 12.0\vc\include\pmmintrin.h + + +1374412934 c:\program files (x86)\microsoft visual studio 12.0\vc\include\emmintrin.h + + +1374410776 c:\program files (x86)\microsoft visual studio 12.0\vc\include\xmmintrin.h + + "xmm_func.h" + + +1374412934 c:\program files (x86)\microsoft visual studio 12.0\vc\include\mmintrin.h + + +1374412934 c:\program files (x86)\microsoft visual studio 12.0\vc\include\ammintrin.h + +1374412934 c:\program files (x86)\microsoft visual studio 12.0\vc\include\mm3dnow.h + + + + +1374412934 c:\program files (x86)\microsoft visual studio 12.0\vc\include\armintr.h + +1374412938 c:\program files (x86)\microsoft visual studio 12.0\vc\include\xatomic.h + + + + + + + +1374726946 c:\program files (x86)\microsoft visual studio 12.0\vc\include\typeinfo + + + + +1374726946 c:\program files (x86)\microsoft visual studio 12.0\vc\include\xlocinfo + + + + +1374410776 c:\program files (x86)\microsoft visual studio 12.0\vc\include\xlocinfo.h + + + + + +1374412934 c:\program files (x86)\microsoft visual studio 12.0\vc\include\ctype.h + + +1374412934 c:\program files (x86)\microsoft visual studio 12.0\vc\include\locale.h + + +1374412938 c:\program files (x86)\microsoft visual studio 12.0\vc\include\xdebug + + + + +1374410776 c:\program files (x86)\microsoft visual studio 12.0\vc\include\xmemory + + +1374410776 c:\program files (x86)\microsoft visual studio 12.0\vc\include\xfacet + + +1374726946 c:\program files (x86)\microsoft visual studio 12.0\vc\include\system_error + + + + +1374412936 c:\program files (x86)\microsoft visual studio 12.0\vc\include\cerrno + + + + +1374410776 c:\program files (x86)\microsoft visual studio 12.0\vc\include\errno.h + + +1374412934 c:\program files (x86)\microsoft visual studio 12.0\vc\include\share.h + +1374412936 c:\program files (x86)\microsoft visual studio 12.0\vc\include\stdint.h + + +1374412936 c:\program files (x86)\microsoft visual studio 12.0\vc\include\string + + +1374412936 c:\program files (x86)\microsoft visual studio 12.0\vc\include\iterator + + + +1374726946 c:\program files (x86)\microsoft visual studio 12.0\vc\include\fstream + + +1374726946 c:\program files (x86)\microsoft visual studio 12.0\vc\include\sstream + + +1374412938 c:\program files (x86)\microsoft visual studio 12.0\vc\include\unordered_map + + + +1374410776 c:\program files (x86)\microsoft visual studio 12.0\vc\include\xhash + + + + + +1374412936 c:\program files (x86)\microsoft visual studio 12.0\vc\include\list + + + +1374410776 c:\program files (x86)\microsoft visual studio 12.0\vc\include\vector + + + +1374412938 c:\program files (x86)\microsoft visual studio 12.0\vc\include\tuple + + + + +1374412936 c:\program files (x86)\microsoft visual studio 12.0\vc\include\map + + + +1374726946 c:\program files (x86)\microsoft visual studio 12.0\vc\include\xtree + + + +1254299028 c:\program files (x86)\microsoft visual studio 10.0\vc\include\iostream + + +1257671184 c:\program files (x86)\microsoft visual studio 10.0\vc\include\istream + + +1257671184 c:\program files (x86)\microsoft visual studio 10.0\vc\include\ostream + + +1257671184 c:\program files (x86)\microsoft visual studio 10.0\vc\include\ios + + +1251642866 c:\program files (x86)\microsoft visual studio 10.0\vc\include\xlocnum + + + + + + +1251642866 c:\program files (x86)\microsoft visual studio 10.0\vc\include\climits + + + +1258271576 c:\program files (x86)\microsoft visual studio 10.0\vc\include\yvals.h + + + + + + + +1260264954 c:\program files (x86)\microsoft visual studio 10.0\vc\include\crtdefs.h + + + +1263987576 c:\program files (x86)\microsoft visual studio 10.0\vc\include\sal.h + "codeanalysis\sourceannotations.h" + +1263303828 c:\program files (x86)\microsoft visual studio 10.0\vc\include\codeanalysis\sourceannotations.h + +1251642866 c:\program files (x86)\microsoft visual studio 10.0\vc\include\vadefs.h + +1251647994 c:\program files (x86)\microsoft visual studio 10.0\vc\include\xkeycheck.h + +1257671184 c:\program files (x86)\microsoft visual studio 10.0\vc\include\crtwrn.h + + +1254299028 c:\program files (x86)\microsoft visual studio 10.0\vc\include\use_ansi.h + +1251642866 c:\program files (x86)\microsoft visual studio 10.0\vc\include\limits.h + + +1251642866 c:\program files (x86)\microsoft visual studio 10.0\vc\include\cmath + + + + +1251642866 c:\program files (x86)\microsoft visual studio 10.0\vc\include\math.h + + +1251642866 c:\program files (x86)\microsoft visual studio 10.0\vc\include\cstdio + + + + +1257335008 c:\program files (x86)\microsoft visual studio 10.0\vc\include\stdio.h + + + +1256197836 c:\program files (x86)\microsoft visual studio 10.0\vc\include\swprintf.inl + + +1251642866 c:\program files (x86)\microsoft visual studio 10.0\vc\include\cstdlib + + + + +1257671184 c:\program files (x86)\microsoft visual studio 10.0\vc\include\stdlib.h + + + +1254299028 c:\program files (x86)\microsoft visual studio 10.0\vc\include\streambuf + + +1254299028 c:\program files (x86)\microsoft visual studio 10.0\vc\include\xiosbase + + + + +1263118342 c:\program files (x86)\microsoft visual studio 10.0\vc\include\xlocale + + + + + + + +1251642866 c:\program files (x86)\microsoft visual studio 10.0\vc\include\cstring + + + + +1260264954 c:\program files (x86)\microsoft visual studio 10.0\vc\include\string.h + + +1251642866 c:\program files (x86)\microsoft visual studio 10.0\vc\include\stdexcept + + + +1254299028 c:\program files (x86)\microsoft visual studio 10.0\vc\include\exception + + + + + +1254299028 c:\program files (x86)\microsoft visual studio 10.0\vc\include\xstddef + + + +1251642866 c:\program files (x86)\microsoft visual studio 10.0\vc\include\cstddef + + + + +1254299028 c:\program files (x86)\microsoft visual studio 10.0\vc\include\stddef.h + + +1254299028 c:\program files (x86)\microsoft visual studio 10.0\vc\include\eh.h + + +1251642866 c:\program files (x86)\microsoft visual studio 10.0\vc\include\malloc.h + + +1257671184 c:\program files (x86)\microsoft visual studio 10.0\vc\include\xstring + + +1254299028 c:\program files (x86)\microsoft visual studio 10.0\vc\include\xmemory + + + + +1251642866 c:\program files (x86)\microsoft visual studio 10.0\vc\include\new + + +1258271576 c:\program files (x86)\microsoft visual studio 10.0\vc\include\xutility + + + + +1257671184 c:\program files (x86)\microsoft visual studio 10.0\vc\include\utility + + + + +1254299028 c:\program files (x86)\microsoft visual studio 10.0\vc\include\iosfwd + + + + + + +1251642866 c:\program files (x86)\microsoft visual studio 10.0\vc\include\cwchar + + + + +1257335008 c:\program files (x86)\microsoft visual studio 10.0\vc\include\wchar.h + + + + +1251642866 c:\program files (x86)\microsoft visual studio 10.0\vc\include\wtime.inl + +1254299028 c:\program files (x86)\microsoft visual studio 10.0\vc\include\crtdbg.h + + +1263118342 c:\program files (x86)\microsoft visual studio 10.0\vc\include\type_traits + + + + +1251642866 c:\program files (x86)\microsoft visual studio 10.0\vc\include\limits + + + + + + + +1251642866 c:\program files (x86)\microsoft visual studio 10.0\vc\include\ymath.h + + +1251642866 c:\program files (x86)\microsoft visual studio 10.0\vc\include\cfloat + + + +1251642866 c:\program files (x86)\microsoft visual studio 10.0\vc\include\float.h + + + +1254299028 c:\program files (x86)\microsoft visual studio 10.0\vc\include\xtr1common + + +1263118342 c:\program files (x86)\microsoft visual studio 10.0\vc\include\xfwrap + + + + + + + + + + + + +1263118342 c:\program files (x86)\microsoft visual studio 10.0\vc\include\xfwrap1 + + + + + + + + + + + + + + +1254299028 c:\program files (x86)\microsoft visual studio 10.0\vc\include\xxbind1 + +1254299028 c:\program files (x86)\microsoft visual studio 10.0\vc\include\xxcallfun + +1254299028 c:\program files (x86)\microsoft visual studio 10.0\vc\include\xxcallobj + +1254299028 c:\program files (x86)\microsoft visual studio 10.0\vc\include\xxcallpmf + +1257671184 c:\program files (x86)\microsoft visual studio 10.0\vc\include\xxfunction + +1251647994 c:\program files (x86)\microsoft visual studio 10.0\vc\include\xxmem_fn + +1254299028 c:\program files (x86)\microsoft visual studio 10.0\vc\include\xxpmfcaller + +1254299028 c:\program files (x86)\microsoft visual studio 10.0\vc\include\xxrefwrap + +1254299028 c:\program files (x86)\microsoft visual studio 10.0\vc\include\xxresult + +1251647994 c:\program files (x86)\microsoft visual studio 10.0\vc\include\xxshared + +1254299028 c:\program files (x86)\microsoft visual studio 10.0\vc\include\xxtuple0 + +1251647994 c:\program files (x86)\microsoft visual studio 10.0\vc\include\xxtuple1 + +1251647994 c:\program files (x86)\microsoft visual studio 10.0\vc\include\xxtype_traits + +1257671184 c:\program files (x86)\microsoft visual studio 10.0\vc\include\typeinfo + + + + +1254299028 c:\program files (x86)\microsoft visual studio 10.0\vc\include\xlocinfo + + + + +1254299028 c:\program files (x86)\microsoft visual studio 10.0\vc\include\xlocinfo.h + + + + + +1251642866 c:\program files (x86)\microsoft visual studio 10.0\vc\include\ctype.h + + +1251642866 c:\program files (x86)\microsoft visual studio 10.0\vc\include\locale.h + + +1263118342 c:\program files (x86)\microsoft visual studio 10.0\vc\include\xdebug + + + + +1260264954 c:\program files (x86)\microsoft visual studio 10.0\vc\include\system_error + + + + +1251642866 c:\program files (x86)\microsoft visual studio 10.0\vc\include\cerrno + + + + +1251642866 c:\program files (x86)\microsoft visual studio 10.0\vc\include\errno.h + + +1251642866 c:\program files (x86)\microsoft visual studio 10.0\vc\include\share.h + +1254299028 c:\program files (x86)\microsoft visual studio 10.0\vc\include\stdint.h + + +1257671184 c:\program files (x86)\microsoft visual studio 10.0\vc\include\string + + +1263118342 c:\program files (x86)\microsoft visual studio 10.0\vc\include\fstream + + +1254299028 c:\program files (x86)\microsoft visual studio 10.0\vc\include\sstream + + +1254299028 c:\program files (x86)\microsoft visual studio 10.0\vc\include\unordered_map + + +1263720180 c:\program files (x86)\microsoft visual studio 10.0\vc\include\xhash + + + + + + +1251647994 c:\program files (x86)\microsoft visual studio 10.0\vc\include\xfunctional + + + +1254299028 c:\program files (x86)\microsoft visual studio 10.0\vc\include\list + + + + +1267607544 c:\program files (x86)\microsoft visual studio 10.0\vc\include\memory + + + + + + + + + +1263118342 c:\program files (x86)\microsoft visual studio 10.0\vc\include\intrin.h + + + + + + +1251642866 c:\program files (x86)\microsoft visual studio 10.0\vc\include\setjmp.h + + + +1251642866 c:\program files (x86)\microsoft visual studio 10.0\vc\include\setjmpex.h + + +1251647992 c:\program files (x86)\microsoft visual studio 10.0\vc\include\immintrin.h + + +1251642866 c:\program files (x86)\microsoft visual studio 10.0\vc\include\wmmintrin.h + + +1251642866 c:\program files (x86)\microsoft visual studio 10.0\vc\include\nmmintrin.h + + +1251642866 c:\program files (x86)\microsoft visual studio 10.0\vc\include\smmintrin.h + + +1251642866 c:\program files (x86)\microsoft visual studio 10.0\vc\include\tmmintrin.h + + +1251642866 c:\program files (x86)\microsoft visual studio 10.0\vc\include\pmmintrin.h + + +1251642866 c:\program files (x86)\microsoft visual studio 10.0\vc\include\emmintrin.h + + +1251642866 c:\program files (x86)\microsoft visual studio 10.0\vc\include\xmmintrin.h + + "xmm_func.h" + + +1251642866 c:\program files (x86)\microsoft visual studio 10.0\vc\include\mmintrin.h + + +1251642866 c:\program files (x86)\microsoft visual studio 10.0\vc\include\mm3dnow.h + + + + +1258271576 c:\program files (x86)\microsoft visual studio 10.0\vc\include\vector + + + + +1254299028 c:\program files (x86)\microsoft visual studio 10.0\vc\include\map + + +1258271576 c:\program files (x86)\microsoft visual studio 10.0\vc\include\xtree + + + + From e18dddf3abc33e23e43d8fee2ff9916f108a12da Mon Sep 17 00:00:00 2001 From: kaltenbe Date: Tue, 16 Feb 2016 16:23:23 +0100 Subject: [PATCH 26/55] added SeDoRa eNodeB Configuration files --- .../CONF/enb.band13.tm1.50PRB.sedora.conf | 171 ++++++++++++++++++ .../CONF/enb.band7.tm1.50PRB.sedora.conf | 171 ++++++++++++++++++ .../CONF/enb.band7.tm1.sedora.conf | 171 ++++++++++++++++++ 3 files changed, 513 insertions(+) create mode 100644 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band13.tm1.50PRB.sedora.conf create mode 100644 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.sedora.conf create mode 100644 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.sedora.conf diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band13.tm1.50PRB.sedora.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band13.tm1.50PRB.sedora.conf new file mode 100644 index 0000000000..2d0b63e4b0 --- /dev/null +++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band13.tm1.50PRB.sedora.conf @@ -0,0 +1,171 @@ +Active_eNBs = ( "eNB_Eurecom_LTEBox"); +# Asn1_verbosity, choice in: none, info, annoying +Asn1_verbosity = "none"; + +eNBs = +( + { + ////////// Identification parameters: + eNB_ID = 0xe00; + + cell_type = "CELL_MACRO_ENB"; + + eNB_name = "eNB_Eurecom_LTEBox"; + + // Tracking area code, 0x0000 and 0xfffe are reserved values + tracking_area_code = "1"; + + mobile_country_code = "208"; + + mobile_network_code = "93"; + + ////////// Physical parameters: + + component_carriers = ( + { + frame_type = "FDD"; + tdd_config = 3; + tdd_config_s = 0; + prefix_type = "NORMAL"; + eutra_band = 7; + downlink_frequency = 751000000L; + uplink_frequency_offset = 30000000; + Nid_cell = 0; + N_RB_DL = 50; + Nid_cell_mbsfn = 0; + nb_antennas_tx = 1; + nb_antennas_rx = 1; + tx_gain = 60; + rx_gain = 111; + prach_root = 0; + prach_config_index = 0; + prach_high_speed = "DISABLE"; + prach_zero_correlation = 1; + prach_freq_offset = 2; + pucch_delta_shift = 1; + pucch_nRB_CQI = 1; + pucch_nCS_AN = 0; + pucch_n1_AN = 32; + pdsch_referenceSignalPower = -29; + pdsch_p_b = 0; + pusch_n_SB = 1; + pusch_enable64QAM = "DISABLE"; + pusch_hoppingMode = "interSubFrame"; + pusch_hoppingOffset = 0; + pusch_groupHoppingEnabled = "ENABLE"; + pusch_groupAssignment = 0; + pusch_sequenceHoppingEnabled = "DISABLE"; + pusch_nDMRS1 = 1; + phich_duration = "NORMAL"; + phich_resource = "ONESIXTH"; + srs_enable = "DISABLE"; + /* srs_BandwidthConfig =; + srs_SubframeConfig =; + srs_ackNackST =; + srs_MaxUpPts =;*/ + + pusch_p0_Nominal = -85; + pusch_alpha = "AL1"; + pucch_p0_Nominal = -96; + msg3_delta_Preamble = 6; + pucch_deltaF_Format1 = "deltaF2"; + pucch_deltaF_Format1b = "deltaF3"; + pucch_deltaF_Format2 = "deltaF0"; + pucch_deltaF_Format2a = "deltaF0"; + pucch_deltaF_Format2b = "deltaF0"; + + rach_numberOfRA_Preambles = 64; + rach_preamblesGroupAConfig = "DISABLE"; +/* + rach_sizeOfRA_PreamblesGroupA = ; + rach_messageSizeGroupA = ; + rach_messagePowerOffsetGroupB = ; +*/ + rach_powerRampingStep = 4; + rach_preambleInitialReceivedTargetPower = -100; + rach_preambleTransMax = 10; + rach_raResponseWindowSize = 10; + rach_macContentionResolutionTimer = 48; + rach_maxHARQ_Msg3Tx = 4; + + pcch_default_PagingCycle = 128; + pcch_nB = "oneT"; + bcch_modificationPeriodCoeff = 2; + ue_TimersAndConstants_t300 = 1000; + ue_TimersAndConstants_t301 = 1000; + ue_TimersAndConstants_t310 = 1000; + ue_TimersAndConstants_t311 = 10000; + ue_TimersAndConstants_n310 = 20; + ue_TimersAndConstants_n311 = 1; + + } + ); + + + srb1_parameters : + { + # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500] + timer_poll_retransmit = 80; + + # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200] + timer_reordering = 35; + + # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500] + timer_status_prohibit = 0; + + # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)] + poll_pdu = 4; + + # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)] + poll_byte = 99999; + + # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32] + max_retx_threshold = 4; + } + + # ------- SCTP definitions + SCTP : + { + # Number of streams to use in input/output + SCTP_INSTREAMS = 2; + SCTP_OUTSTREAMS = 2; + }; + + ////////// MME parameters: + mme_ip_address = ( { ipv4 = "192.168.12.11"; + ipv6 = "192:168:30::17"; + active = "yes"; + preference = "ipv4"; + } + ); + + NETWORK_INTERFACES : + { + ENB_INTERFACE_NAME_FOR_S1_MME = "eth0"; + ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.215/24"; + + ENB_INTERFACE_NAME_FOR_S1U = "eth0"; + ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.215/24"; + ENB_PORT_FOR_S1U = 2152; # Spec 2152 + }; + + log_config : + { + global_log_level ="info"; + global_log_verbosity ="medium"; + hw_log_level ="info"; + hw_log_verbosity ="medium"; + phy_log_level ="info"; + phy_log_verbosity ="medium"; + mac_log_level ="info"; + mac_log_verbosity ="high"; + rlc_log_level ="info"; + rlc_log_verbosity ="medium"; + pdcp_log_level ="info"; + pdcp_log_verbosity ="medium"; + rrc_log_level ="info"; + rrc_log_verbosity ="medium"; + }; + + } +); diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.sedora.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.sedora.conf new file mode 100644 index 0000000000..8a5f33af4b --- /dev/null +++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.sedora.conf @@ -0,0 +1,171 @@ +Active_eNBs = ( "eNB_Eurecom_LTEBox"); +# Asn1_verbosity, choice in: none, info, annoying +Asn1_verbosity = "none"; + +eNBs = +( + { + ////////// Identification parameters: + eNB_ID = 0xe00; + + cell_type = "CELL_MACRO_ENB"; + + eNB_name = "eNB_Eurecom_LTEBox"; + + // Tracking area code, 0x0000 and 0xfffe are reserved values + tracking_area_code = "1"; + + mobile_country_code = "208"; + + mobile_network_code = "93"; + + ////////// Physical parameters: + + component_carriers = ( + { + frame_type = "FDD"; + tdd_config = 3; + tdd_config_s = 0; + prefix_type = "NORMAL"; + eutra_band = 7; + downlink_frequency = 2660000000L; + uplink_frequency_offset = -120000000; + Nid_cell = 0; + N_RB_DL = 50; + Nid_cell_mbsfn = 0; + nb_antennas_tx = 1; + nb_antennas_rx = 1; + tx_gain = 60; + rx_gain = 111; + prach_root = 0; + prach_config_index = 0; + prach_high_speed = "DISABLE"; + prach_zero_correlation = 1; + prach_freq_offset = 2; + pucch_delta_shift = 1; + pucch_nRB_CQI = 1; + pucch_nCS_AN = 0; + pucch_n1_AN = 32; + pdsch_referenceSignalPower = -29; + pdsch_p_b = 0; + pusch_n_SB = 1; + pusch_enable64QAM = "DISABLE"; + pusch_hoppingMode = "interSubFrame"; + pusch_hoppingOffset = 0; + pusch_groupHoppingEnabled = "ENABLE"; + pusch_groupAssignment = 0; + pusch_sequenceHoppingEnabled = "DISABLE"; + pusch_nDMRS1 = 1; + phich_duration = "NORMAL"; + phich_resource = "ONESIXTH"; + srs_enable = "DISABLE"; + /* srs_BandwidthConfig =; + srs_SubframeConfig =; + srs_ackNackST =; + srs_MaxUpPts =;*/ + + pusch_p0_Nominal = -85; + pusch_alpha = "AL1"; + pucch_p0_Nominal = -96; + msg3_delta_Preamble = 6; + pucch_deltaF_Format1 = "deltaF2"; + pucch_deltaF_Format1b = "deltaF3"; + pucch_deltaF_Format2 = "deltaF0"; + pucch_deltaF_Format2a = "deltaF0"; + pucch_deltaF_Format2b = "deltaF0"; + + rach_numberOfRA_Preambles = 64; + rach_preamblesGroupAConfig = "DISABLE"; +/* + rach_sizeOfRA_PreamblesGroupA = ; + rach_messageSizeGroupA = ; + rach_messagePowerOffsetGroupB = ; +*/ + rach_powerRampingStep = 4; + rach_preambleInitialReceivedTargetPower = -100; + rach_preambleTransMax = 10; + rach_raResponseWindowSize = 10; + rach_macContentionResolutionTimer = 48; + rach_maxHARQ_Msg3Tx = 4; + + pcch_default_PagingCycle = 128; + pcch_nB = "oneT"; + bcch_modificationPeriodCoeff = 2; + ue_TimersAndConstants_t300 = 1000; + ue_TimersAndConstants_t301 = 1000; + ue_TimersAndConstants_t310 = 1000; + ue_TimersAndConstants_t311 = 10000; + ue_TimersAndConstants_n310 = 20; + ue_TimersAndConstants_n311 = 1; + + } + ); + + + srb1_parameters : + { + # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500] + timer_poll_retransmit = 80; + + # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200] + timer_reordering = 35; + + # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500] + timer_status_prohibit = 0; + + # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)] + poll_pdu = 4; + + # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)] + poll_byte = 99999; + + # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32] + max_retx_threshold = 4; + } + + # ------- SCTP definitions + SCTP : + { + # Number of streams to use in input/output + SCTP_INSTREAMS = 2; + SCTP_OUTSTREAMS = 2; + }; + + ////////// MME parameters: + mme_ip_address = ( { ipv4 = "192.168.12.11"; + ipv6 = "192:168:30::17"; + active = "yes"; + preference = "ipv4"; + } + ); + + NETWORK_INTERFACES : + { + ENB_INTERFACE_NAME_FOR_S1_MME = "eth0"; + ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.215/24"; + + ENB_INTERFACE_NAME_FOR_S1U = "eth0"; + ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.215/24"; + ENB_PORT_FOR_S1U = 2152; # Spec 2152 + }; + + log_config : + { + global_log_level ="info"; + global_log_verbosity ="medium"; + hw_log_level ="info"; + hw_log_verbosity ="medium"; + phy_log_level ="info"; + phy_log_verbosity ="medium"; + mac_log_level ="info"; + mac_log_verbosity ="high"; + rlc_log_level ="info"; + rlc_log_verbosity ="medium"; + pdcp_log_level ="info"; + pdcp_log_verbosity ="medium"; + rrc_log_level ="info"; + rrc_log_verbosity ="medium"; + }; + + } +); diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.sedora.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.sedora.conf new file mode 100644 index 0000000000..70fcc2e3f4 --- /dev/null +++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.sedora.conf @@ -0,0 +1,171 @@ +Active_eNBs = ( "eNB_Eurecom_LTEBox"); +# Asn1_verbosity, choice in: none, info, annoying +Asn1_verbosity = "none"; + +eNBs = +( + { + ////////// Identification parameters: + eNB_ID = 0xe00; + + cell_type = "CELL_MACRO_ENB"; + + eNB_name = "eNB_Eurecom_LTEBox"; + + // Tracking area code, 0x0000 and 0xfffe are reserved values + tracking_area_code = "1"; + + mobile_country_code = "208"; + + mobile_network_code = "93"; + + ////////// Physical parameters: + + component_carriers = ( + { + frame_type = "FDD"; + tdd_config = 3; + tdd_config_s = 0; + prefix_type = "NORMAL"; + eutra_band = 7; + downlink_frequency = 2660000000L; + uplink_frequency_offset = -120000000; + Nid_cell = 0; + N_RB_DL = 25; + Nid_cell_mbsfn = 0; + nb_antennas_tx = 1; + nb_antennas_rx = 1; + tx_gain = 60; + rx_gain = 111; + prach_root = 0; + prach_config_index = 0; + prach_high_speed = "DISABLE"; + prach_zero_correlation = 1; + prach_freq_offset = 2; + pucch_delta_shift = 1; + pucch_nRB_CQI = 1; + pucch_nCS_AN = 0; + pucch_n1_AN = 32; + pdsch_referenceSignalPower = -29; + pdsch_p_b = 0; + pusch_n_SB = 1; + pusch_enable64QAM = "DISABLE"; + pusch_hoppingMode = "interSubFrame"; + pusch_hoppingOffset = 0; + pusch_groupHoppingEnabled = "ENABLE"; + pusch_groupAssignment = 0; + pusch_sequenceHoppingEnabled = "DISABLE"; + pusch_nDMRS1 = 1; + phich_duration = "NORMAL"; + phich_resource = "ONESIXTH"; + srs_enable = "DISABLE"; + /* srs_BandwidthConfig =; + srs_SubframeConfig =; + srs_ackNackST =; + srs_MaxUpPts =;*/ + + pusch_p0_Nominal = -85; + pusch_alpha = "AL1"; + pucch_p0_Nominal = -96; + msg3_delta_Preamble = 6; + pucch_deltaF_Format1 = "deltaF2"; + pucch_deltaF_Format1b = "deltaF3"; + pucch_deltaF_Format2 = "deltaF0"; + pucch_deltaF_Format2a = "deltaF0"; + pucch_deltaF_Format2b = "deltaF0"; + + rach_numberOfRA_Preambles = 64; + rach_preamblesGroupAConfig = "DISABLE"; +/* + rach_sizeOfRA_PreamblesGroupA = ; + rach_messageSizeGroupA = ; + rach_messagePowerOffsetGroupB = ; +*/ + rach_powerRampingStep = 4; + rach_preambleInitialReceivedTargetPower = -100; + rach_preambleTransMax = 10; + rach_raResponseWindowSize = 10; + rach_macContentionResolutionTimer = 48; + rach_maxHARQ_Msg3Tx = 4; + + pcch_default_PagingCycle = 128; + pcch_nB = "oneT"; + bcch_modificationPeriodCoeff = 2; + ue_TimersAndConstants_t300 = 1000; + ue_TimersAndConstants_t301 = 1000; + ue_TimersAndConstants_t310 = 1000; + ue_TimersAndConstants_t311 = 10000; + ue_TimersAndConstants_n310 = 20; + ue_TimersAndConstants_n311 = 1; + + } + ); + + + srb1_parameters : + { + # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500] + timer_poll_retransmit = 80; + + # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200] + timer_reordering = 35; + + # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500] + timer_status_prohibit = 0; + + # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)] + poll_pdu = 4; + + # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)] + poll_byte = 99999; + + # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32] + max_retx_threshold = 4; + } + + # ------- SCTP definitions + SCTP : + { + # Number of streams to use in input/output + SCTP_INSTREAMS = 2; + SCTP_OUTSTREAMS = 2; + }; + + ////////// MME parameters: + mme_ip_address = ( { ipv4 = "192.168.12.11"; + ipv6 = "192:168:30::17"; + active = "yes"; + preference = "ipv4"; + } + ); + + NETWORK_INTERFACES : + { + ENB_INTERFACE_NAME_FOR_S1_MME = "eth0"; + ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.215/24"; + + ENB_INTERFACE_NAME_FOR_S1U = "eth0"; + ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.215/24"; + ENB_PORT_FOR_S1U = 2152; # Spec 2152 + }; + + log_config : + { + global_log_level ="info"; + global_log_verbosity ="medium"; + hw_log_level ="info"; + hw_log_verbosity ="medium"; + phy_log_level ="info"; + phy_log_verbosity ="medium"; + mac_log_level ="info"; + mac_log_verbosity ="high"; + rlc_log_level ="info"; + rlc_log_verbosity ="medium"; + pdcp_log_level ="info"; + pdcp_log_verbosity ="medium"; + rrc_log_level ="info"; + rrc_log_verbosity ="medium"; + }; + + } +); From e697b22253821c0ec6b72bc8822c215754b1aac0 Mon Sep 17 00:00:00 2001 From: Aikaterini Trilyraki Date: Tue, 16 Feb 2016 16:29:44 +0100 Subject: [PATCH 27/55] Delete .#lte-softmodem.c --- targets/RT/USER/.#lte-softmodem.c | 1 - 1 file changed, 1 deletion(-) delete mode 120000 targets/RT/USER/.#lte-softmodem.c diff --git a/targets/RT/USER/.#lte-softmodem.c b/targets/RT/USER/.#lte-softmodem.c deleted file mode 120000 index dbbd658659..0000000000 --- a/targets/RT/USER/.#lte-softmodem.c +++ /dev/null @@ -1 +0,0 @@ -guepe@guepe.25164:1451994252 \ No newline at end of file From f722b2971dbfb155b14ef1ab50061edf3713cafa Mon Sep 17 00:00:00 2001 From: Florian Kaltenberger Date: Tue, 16 Feb 2016 16:53:07 +0100 Subject: [PATCH 28/55] including LMSSDR CMakeList.txt into main CMakeList.txt --- cmake_targets/CMakeLists.txt | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/cmake_targets/CMakeLists.txt b/cmake_targets/CMakeLists.txt index ee28608504..b5c3cffce6 100644 --- a/cmake_targets/CMakeLists.txt +++ b/cmake_targets/CMakeLists.txt @@ -42,6 +42,10 @@ set (OPENAIR_BIN_DIR ${CMAKE_CURRENT_BINARY_DIR}${CMAKE_FILES_DIRECTORY}) project (OpenAirInterface) +add_subdirectory(${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB/lms7002m lms7002m) +add_subdirectory(${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR lmsSDR) +add_subdirectory(${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB/Si5351C Si5351C) + ########################################### # macros to define options as there is numerous options in oai ################################################ @@ -498,9 +502,9 @@ elseif (${RF_BOARD} STREQUAL "OAI_LMSSDR") include_directories("${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB/Si5351C") include_directories("${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/LMS_StreamBoard") LINK_DIRECTORIES("/usr/lib/x86_64-linux-gnu") - LINK_DIRECTORIES("${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/build") - LINK_DIRECTORIES("${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/build") - LINK_DIRECTORIES("${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/build") + LINK_DIRECTORIES("${CMAKE_CURRENT_BINARY_DIR}/lmsSDR") + LINK_DIRECTORIES("${CMAKE_CURRENT_BINARY_DIR}/lms7002m") + LINK_DIRECTORIES("${CMAKE_CURRENT_BINARY_DIR}/Si5351C") set(HW_SOURCE ${HW_SOURCE} ${OPENAIR_TARGETS}/ARCH/LMSSDR/USERSPACE/LIB/lms_lib.cpp) set(LOWLATENCY False) set(option_HW_lib "-lLMS_SDR -lLMS7002M -lSi5351C -rdynamic -ldl") @@ -1558,7 +1562,10 @@ target_link_libraries (lte-softmodem-nos1 ${LIBXML2_LIBRARIES}) target_link_libraries (lte-softmodem-nos1 pthread m ${CONFIG_LIBRARIES} rt crypt ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} ${option_HW_lib} ${option_TP_lib} ${XFORMS_LIBRARIES} ) target_link_libraries (lte-softmodem-nos1 ${LIBBOOST_LIBRARIES}) - +if (${RF_BOARD} STREQUAL "OAI_LMSSDR") + add_dependencies(lte-softmodem LMS7002M LMS_SDR Si5351C) + add_dependencies(lte-softmodem-nos1 LMS7002M LMS_SDR Si5351C) +endif (${RF_BOARD} STREQUAL "OAI_LMSSDR") # rrh ################################ From 4079a46cb8db9ce0919d3f308effec2ebe173ff8 Mon Sep 17 00:00:00 2001 From: Aikaterini Date: Tue, 16 Feb 2016 17:33:15 +0100 Subject: [PATCH 29/55] config files for RRH SoDERA --- .../CONF/enb.band7.tm1.50PRB.rrh.sodera.conf | 190 +++++++++++++++++ .../CONF/enb.band7.tm1.rrh.sodera.conf | 192 ++++++++++++++++++ 2 files changed, 382 insertions(+) create mode 100644 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.rrh.sodera.conf create mode 100644 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.sodera.conf diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.rrh.sodera.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.rrh.sodera.conf new file mode 100644 index 0000000000..c3985c9dce --- /dev/null +++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.rrh.sodera.conf @@ -0,0 +1,190 @@ +Active_eNBs = ( "eNB_Eurecom_LTEBox"); +# Asn1_verbosity, choice in: none, info, annoying +Asn1_verbosity = "none"; + +eNBs = +( + { + ////////// Identification parameters: + eNB_ID = 0xe00; + + cell_type = "CELL_MACRO_ENB"; + + eNB_name = "eNB_Eurecom_LTEBox"; + + // Tracking area code, 0x0000 and 0xfffe are reserved values + tracking_area_code = "1"; + + mobile_country_code = "208"; + + mobile_network_code = "93"; + + ////////// Physical parameters: + + component_carriers = ( + { + frame_type = "FDD"; + tdd_config = 3; + tdd_config_s = 0; + prefix_type = "NORMAL"; + eutra_band = 7; + downlink_frequency = 2660000000L; + uplink_frequency_offset = -120000000; + Nid_cell = 0; + N_RB_DL = 50; + Nid_cell_mbsfn = 0; + nb_antennas_tx = 1; + nb_antennas_rx = 1; + tx_gain = 60; + rx_gain = 111; + prach_root = 0; + prach_config_index = 0; + prach_high_speed = "DISABLE"; + prach_zero_correlation = 1; + prach_freq_offset = 2; + pucch_delta_shift = 1; + pucch_nRB_CQI = 1; + pucch_nCS_AN = 0; + pucch_n1_AN = 32; + pdsch_referenceSignalPower = -29; + pdsch_p_b = 0; + pusch_n_SB = 1; + pusch_enable64QAM = "DISABLE"; + pusch_hoppingMode = "interSubFrame"; + pusch_hoppingOffset = 0; + pusch_groupHoppingEnabled = "ENABLE"; + pusch_groupAssignment = 0; + pusch_sequenceHoppingEnabled = "DISABLE"; + pusch_nDMRS1 = 1; + phich_duration = "NORMAL"; + phich_resource = "ONESIXTH"; + srs_enable = "DISABLE"; + /* srs_BandwidthConfig =; + srs_SubframeConfig =; + srs_ackNackST =; + srs_MaxUpPts =;*/ + + pusch_p0_Nominal = -85; + pusch_alpha = "AL1"; + pucch_p0_Nominal = -96; + msg3_delta_Preamble = 6; + pucch_deltaF_Format1 = "deltaF2"; + pucch_deltaF_Format1b = "deltaF3"; + pucch_deltaF_Format2 = "deltaF0"; + pucch_deltaF_Format2a = "deltaF0"; + pucch_deltaF_Format2b = "deltaF0"; + + rach_numberOfRA_Preambles = 64; + rach_preamblesGroupAConfig = "DISABLE"; +/* + rach_sizeOfRA_PreamblesGroupA = ; + rach_messageSizeGroupA = ; + rach_messagePowerOffsetGroupB = ; +*/ + rach_powerRampingStep = 4; + rach_preambleInitialReceivedTargetPower = -100; + rach_preambleTransMax = 10; + rach_raResponseWindowSize = 10; + rach_macContentionResolutionTimer = 48; + rach_maxHARQ_Msg3Tx = 4; + + pcch_default_PagingCycle = 128; + pcch_nB = "oneT"; + bcch_modificationPeriodCoeff = 2; + ue_TimersAndConstants_t300 = 1000; + ue_TimersAndConstants_t301 = 1000; + ue_TimersAndConstants_t310 = 1000; + ue_TimersAndConstants_t311 = 10000; + ue_TimersAndConstants_n310 = 20; + ue_TimersAndConstants_n311 = 1; + + } + ); + + + srb1_parameters : + { + # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500] + timer_poll_retransmit = 80; + + # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200] + timer_reordering = 35; + + # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500] + timer_status_prohibit = 0; + + # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)] + poll_pdu = 4; + + # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)] + poll_byte = 99999; + + # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32] + max_retx_threshold = 4; + } + + # ------- SCTP definitions + SCTP : + { + # Number of streams to use in input/output + SCTP_INSTREAMS = 2; + SCTP_OUTSTREAMS = 2; + }; + + ////////// MME parameters: + mme_ip_address = ( { ipv4 = "192.168.12.11"; + ipv6 = "192:168:30::17"; + active = "yes"; + preference = "ipv4"; + } + ); + + +rrh_gw_config = ( + { + local_if_name = "eth0"; + remote_address = "169.254.8.28"; + #remote_address = "127.0.0.1"; + #remote_address = "74:d4:35:cc:88:45"; + local_address = "169.254.7.91"; + #local_address = "127.0.0.1"; + #local_address = "d4:be:d9:22:0a:ac"; + #for raw option local port must be the same to remote + local_port = 50000; + remote_port = 50000; + active = "yes"; + preference = "raw"; + +} +); + + NETWORK_INTERFACES : + { + ENB_INTERFACE_NAME_FOR_S1_MME = "eth0"; + ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.111/24"; + + ENB_INTERFACE_NAME_FOR_S1U = "eth0"; + ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.111/24"; + ENB_PORT_FOR_S1U = 2152; # Spec 2152 + }; + + log_config : + { + global_log_level ="info"; + global_log_verbosity ="medium"; + hw_log_level ="info"; + hw_log_verbosity ="medium"; + phy_log_level ="info"; + phy_log_verbosity ="medium"; + mac_log_level ="info"; + mac_log_verbosity ="high"; + rlc_log_level ="info"; + rlc_log_verbosity ="medium"; + pdcp_log_level ="info"; + pdcp_log_verbosity ="medium"; + rrc_log_level ="info"; + rrc_log_verbosity ="medium"; + }; + + } +); diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.sodera.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.sodera.conf new file mode 100644 index 0000000000..2db6eb799b --- /dev/null +++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.sodera.conf @@ -0,0 +1,192 @@ +Active_eNBs = ( "eNB_Eurecom_LTEBox"); +# Asn1_verbosity, choice in: none, info, annoying +Asn1_verbosity = "none"; + +eNBs = +( + { + ////////// Identification parameters: + eNB_ID = 0xe00; + + cell_type = "CELL_MACRO_ENB"; + + eNB_name = "eNB_Eurecom_LTEBox"; + + // Tracking area code, 0x0000 and 0xfffe are reserved values + tracking_area_code = "1"; + + mobile_country_code = "208"; + + mobile_network_code = "92"; + + ////////// Physical parameters: + + component_carriers = ( + { + frame_type = "FDD"; + tdd_config = 3; + tdd_config_s = 0; + prefix_type = "NORMAL"; + eutra_band = 7; + downlink_frequency = 2660000000L; + uplink_frequency_offset = -120000000; + Nid_cell = 0; + N_RB_DL = 25; + Nid_cell_mbsfn = 0; + nb_antennas_tx = 1; + nb_antennas_rx = 1; + tx_gain = 60; + rx_gain = 111; + prach_root = 0; + prach_config_index = 0; + prach_high_speed = "DISABLE"; + prach_zero_correlation = 1; + prach_freq_offset = 2; + pucch_delta_shift = 1; + pucch_nRB_CQI = 1; + pucch_nCS_AN = 0; + pucch_n1_AN = 32; + pdsch_referenceSignalPower = -29; + pdsch_p_b = 0; + pusch_n_SB = 1; + pusch_enable64QAM = "DISABLE"; + pusch_hoppingMode = "interSubFrame"; + pusch_hoppingOffset = 0; + pusch_groupHoppingEnabled = "ENABLE"; + pusch_groupAssignment = 0; + pusch_sequenceHoppingEnabled = "DISABLE"; + pusch_nDMRS1 = 1; + phich_duration = "NORMAL"; + phich_resource = "ONESIXTH"; + srs_enable = "DISABLE"; + /* srs_BandwidthConfig =; + srs_SubframeConfig =; + srs_ackNackST =; + srs_MaxUpPts =;*/ + + pusch_p0_Nominal = -85; + pusch_alpha = "AL1"; + pucch_p0_Nominal = -96; + msg3_delta_Preamble = 6; + pucch_deltaF_Format1 = "deltaF2"; + pucch_deltaF_Format1b = "deltaF3"; + pucch_deltaF_Format2 = "deltaF0"; + pucch_deltaF_Format2a = "deltaF0"; + pucch_deltaF_Format2b = "deltaF0"; + + rach_numberOfRA_Preambles = 64; + rach_preamblesGroupAConfig = "DISABLE"; +/* + rach_sizeOfRA_PreamblesGroupA = ; + rach_messageSizeGroupA = ; + rach_messagePowerOffsetGroupB = ; +*/ + rach_powerRampingStep = 4; + rach_preambleInitialReceivedTargetPower = -100; + rach_preambleTransMax = 10; + rach_raResponseWindowSize = 10; + rach_macContentionResolutionTimer = 48; + rach_maxHARQ_Msg3Tx = 4; + + pcch_default_PagingCycle = 128; + pcch_nB = "oneT"; + bcch_modificationPeriodCoeff = 2; + ue_TimersAndConstants_t300 = 1000; + ue_TimersAndConstants_t301 = 1000; + ue_TimersAndConstants_t310 = 1000; + ue_TimersAndConstants_t311 = 10000; + ue_TimersAndConstants_n310 = 20; + ue_TimersAndConstants_n311 = 1; + + } + ); + + + srb1_parameters : + { + # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500] + timer_poll_retransmit = 80; + + # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200] + timer_reordering = 35; + + # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500] + timer_status_prohibit = 0; + + # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)] + poll_pdu = 4; + + # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)] + poll_byte = 99999; + + # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32] + max_retx_threshold = 4; + } + + # ------- SCTP definitions + SCTP : + { + # Number of streams to use in input/output + SCTP_INSTREAMS = 2; + SCTP_OUTSTREAMS = 2; + }; + + ////////// MME parameters: + mme_ip_address = ( { ipv4 = "192.168.12.26"; + ipv6 = "192:168:30::17"; + active = "yes"; + preference = "ipv4"; + } + ); + + + +rrh_gw_config = ( + { + local_if_name = "eth0"; + remote_address = "169.254.8.28"; + #remote_address = "127.0.0.1"; + #remote_address = "74:d4:35:cc:88:45"; + local_address = "169.254.7.91"; + #local_address = "127.0.0.1"; + #local_address = "d4:be:d9:22:0a:ac"; + #for raw option local port must be the same to remote + local_port = 50000; + remote_port = 50000; + active = "yes"; + preference = "raw"; + +} +); + + + NETWORK_INTERFACES : + { + ENB_INTERFACE_NAME_FOR_S1_MME = "eth4"; + ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.111/24"; + + ENB_INTERFACE_NAME_FOR_S1U = "eth4"; + ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.111/24"; + ENB_PORT_FOR_S1U = 2152; # Spec 2152 + }; + + log_config : + { + global_log_level ="info"; + global_log_verbosity ="medium"; + hw_log_level ="info"; + hw_log_verbosity ="medium"; + phy_log_level ="info"; + phy_log_verbosity ="medium"; + mac_log_level ="info"; + mac_log_verbosity ="high"; + rlc_log_level ="info"; + rlc_log_verbosity ="medium"; + pdcp_log_level ="info"; + pdcp_log_verbosity ="medium"; + rrc_log_level ="info"; + rrc_log_verbosity ="medium"; + }; + + } +); From ff6174aeb140d82ea2a124f3484f6077977466b0 Mon Sep 17 00:00:00 2001 From: Aikaterini Date: Tue, 16 Feb 2016 18:19:39 +0100 Subject: [PATCH 30/55] fix SoDERA RRH config --- cmake_targets/CMakeLists.txt | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/cmake_targets/CMakeLists.txt b/cmake_targets/CMakeLists.txt index b5c3cffce6..7477ef819f 100644 --- a/cmake_targets/CMakeLists.txt +++ b/cmake_targets/CMakeLists.txt @@ -1561,11 +1561,7 @@ target_link_libraries (lte-softmodem-nos1 target_link_libraries (lte-softmodem-nos1 ${LIBXML2_LIBRARIES}) target_link_libraries (lte-softmodem-nos1 pthread m ${CONFIG_LIBRARIES} rt crypt ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} ${option_HW_lib} ${option_TP_lib} ${XFORMS_LIBRARIES} ) target_link_libraries (lte-softmodem-nos1 ${LIBBOOST_LIBRARIES}) - -if (${RF_BOARD} STREQUAL "OAI_LMSSDR") - add_dependencies(lte-softmodem LMS7002M LMS_SDR Si5351C) - add_dependencies(lte-softmodem-nos1 LMS7002M LMS_SDR Si5351C) -endif (${RF_BOARD} STREQUAL "OAI_LMSSDR") +target_link_libraries (lte-softmodem-nos1 ${LIB_LMS_LIBRARIES}) # rrh ################################ @@ -1579,7 +1575,6 @@ add_executable(rrh_gw ${HW_SOURCE} ${TRANSPORT_SOURCE} ) -# assert target_include_directories(rrh_gw PRIVATE ${OPENAIR_DIR}/common/utils/itti) target_link_libraries(rrh_gw -Wl,--start-group @@ -1587,12 +1582,21 @@ target_link_libraries(rrh_gw -Wl,--end-group ) target_link_libraries (rrh_gw rt pthread m ) target_link_libraries (rrh_gw ${option_HW_lib} ${option_TP_lib} ${LIBBOOST_LIBRARIES} ) +target_link_libraries (rrh_gw ${LIB_LMS_LIBRARIES}) Message("-- option_HW_lib=${option_HW_lib}") Message("-- HW_SOURCE=${HW_SOURCE}") Message("-- option_TP_lib=${option_TP_lib}") Message("-- TRANSPORT_SOURCE=${TRANSPORT_SOURCE}") +if (${RF_BOARD} STREQUAL "OAI_LMSSDR") + add_dependencies(lte-softmodem LMS7002M LMS_SDR Si5351C) + add_dependencies(lte-softmodem-nos1 LMS7002M LMS_SDR Si5351C) + add_dependencies(rrh_gw LMS7002M LMS_SDR Si5351C) +endif (${RF_BOARD} STREQUAL "OAI_LMSSDR") + + + # USIM process ################# #add_executable(usim From f3c7d753647d5cb91fd1683611e920407dd27dc2 Mon Sep 17 00:00:00 2001 From: Aikaterini Date: Tue, 16 Feb 2016 21:10:24 +0100 Subject: [PATCH 31/55] fix for RRH --- targets/ARCH/LMSSDR/USERSPACE/LIB/lms_lib.cpp | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lms_lib.cpp b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms_lib.cpp index 9f7063e51d..e5f69d5577 100644 --- a/targets/ARCH/LMSSDR/USERSPACE/LIB/lms_lib.cpp +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms_lib.cpp @@ -819,7 +819,7 @@ extern "C" { */ int device_init(openair0_device *device, openair0_config_t *openair0_cfg){ - + device->type=LMSSDR_DEV; printf("LMSSDR: Initializing openair0_device for %s ...\n", ((device->host_type == BBU_HOST) ? "BBU": "RRH")); switch ((int)openair0_cfg[0].sample_rate) { From 1de3183dabdff6773c00403a79b5ef12fc125b43 Mon Sep 17 00:00:00 2001 From: Aikaterini Date: Tue, 16 Feb 2016 21:11:52 +0100 Subject: [PATCH 32/55] fix for RRH compilation --- targets/RT/USER/eNB_transport_IQ.c | 10 +++++++--- targets/RT/USER/rrh_gw.c | 15 +++++++++++---- targets/RT/USER/rrh_gw_externs.h | 1 + 3 files changed, 19 insertions(+), 7 deletions(-) diff --git a/targets/RT/USER/eNB_transport_IQ.c b/targets/RT/USER/eNB_transport_IQ.c index 594b075941..acb382386e 100644 --- a/targets/RT/USER/eNB_transport_IQ.c +++ b/targets/RT/USER/eNB_transport_IQ.c @@ -147,18 +147,22 @@ void config_BBU_mod( rrh_module_t *mod_enb, uint8_t RT_flag, uint8_t NRT_flag) { mod_enb->devs->openair0_cfg = mod_enb->eth_dev.openair0_cfg; /* check sanity of configuration parameters and print */ - check_dev_config(mod_enb); - + check_dev_config(mod_enb); + if (rf_config_file[0] == '\0') + mod_enb->devs->openair0_cfg->configFilename = NULL; + else + mod_enb->devs->openair0_cfg->configFilename = rf_config_file; /* initialize and configure the RF device */ if (openair0_device_load(mod_enb->devs, mod_enb->devs->openair0_cfg)<0) { LOG_E(RRH,"Exiting, cannot initialize RF device.\n"); exit(-1); - } else { + } else { if (mod_enb->devs->type != NONE_DEV) { /* start RF device */ if (mod_enb->devs->type == EXMIMO_DEV) { //call start function for exmino } else { + if (mod_enb->devs->trx_start_func(mod_enb->devs)!=0) LOG_E(RRH,"Unable to initiate RF device.\n"); else diff --git a/targets/RT/USER/rrh_gw.c b/targets/RT/USER/rrh_gw.c index 87c4d4d77d..3def754e3d 100644 --- a/targets/RT/USER/rrh_gw.c +++ b/targets/RT/USER/rrh_gw.c @@ -111,8 +111,7 @@ rrh_module_t *ue_array; openair0_vtimestamp hw_counter=0; - - +char rf_config_file[1024]; static void debug_init(void); static void get_options(int argc, char *argv[]); @@ -143,7 +142,7 @@ static int get_address(char* if_name, uint8_t flag); int main(int argc, char **argv) { unsigned int i; - + rf_config_file[0]='\0'; /* parse input arguments */ get_options(argc, argv); /* initialize logger and signal analyzer */ @@ -257,7 +256,7 @@ static void get_options(int argc, char *argv[]) { int opt; - while ((opt = getopt(argc, argv, "xvhlte:n:u:g:r:m:i:")) != -1) { + while ((opt = getopt(argc, argv, "xvhlte:n:u:g:r:m:i:f:")) != -1) { switch (opt) { case 'n': @@ -299,6 +298,14 @@ static void get_options(int argc, char *argv[]) { /*In loopback mode rrh sends back to bbu what it receives*/ loopback_flag=1; break; + case 'f': + if (strlen(optarg)<=1024) + strcpy(rf_config_file,optarg); + else { + printf("Configuration filename is too long\n"); + exit(-1); + } + break; case 't': /* When measurements are enabled statistics related to TX/RX time are printed */ measurements_flag=1; diff --git a/targets/RT/USER/rrh_gw_externs.h b/targets/RT/USER/rrh_gw_externs.h index 8d2d1d7e5e..df59b9b1af 100644 --- a/targets/RT/USER/rrh_gw_externs.h +++ b/targets/RT/USER/rrh_gw_externs.h @@ -39,6 +39,7 @@ #ifndef RRH_GW_EXTERNS_H_ #define RRH_GW_EXTERNS_H_ +extern char rf_config_file[1024]; extern openair0_timestamp timestamp_UE_tx[4] ,timestamp_UE_rx[4] ,timestamp_eNB_rx[4],timestamp_eNB_tx[4]; extern openair0_vtimestamp hw_counter; From 78a47159325187df73579317eff4f51702b871ac Mon Sep 17 00:00:00 2001 From: trilyrak Date: Wed, 17 Feb 2016 13:50:05 +0100 Subject: [PATCH 33/55] updated enb configuration params for rrh --- openair2/ENB_APP/enb_config.c | 80 ++++++++++++++++++++++++++++++----- 1 file changed, 70 insertions(+), 10 deletions(-) diff --git a/openair2/ENB_APP/enb_config.c b/openair2/ENB_APP/enb_config.c index b437c7e264..0f6e6b3706 100755 --- a/openair2/ENB_APP/enb_config.c +++ b/openair2/ENB_APP/enb_config.c @@ -177,7 +177,11 @@ #define ENB_CONFIG_STRING_RRH_GW_LOCAL_PORT "local_port" #define ENB_CONFIG_STRING_RRH_GW_REMOTE_PORT "remote_port" #define ENB_CONFIG_STRING_RRH_GW_ACTIVE "active" -#define ENB_CONFIG_STRING_RRH_GW_PREFERENCE "preference" +#define ENB_CONFIG_STRING_RRH_GW_TRANSPORT_PREFERENCE "tr_preference" +#define ENB_CONFIG_STRING_RRH_GW_RF_TARGET_PREFERENCE "rf_preference" +#define ENB_CONFIG_STRING_RRH_GW_IQ_TXSHIFT "iq_txshift" +#define ENB_CONFIG_STRING_RRH_GW_TX_SAMPLE_ADVANCE "tx_sample_advance" +#define ENB_CONFIG_STRING_RRH_GW_TX_SCHEDULING_ADVANCE "tx_scheduling_advance" #define ENB_CONFIG_STRING_ASN1_VERBOSITY "Asn1_verbosity" #define ENB_CONFIG_STRING_ASN1_VERBOSITY_NONE "none" @@ -291,7 +295,23 @@ static void enb_config_display(void) printf( "\tlocal port : \t%d:\n",enb_properties.properties[i]->rrh_gw_config[j].local_port); printf( "\tremote address : \t%s:\n",enb_properties.properties[i]->rrh_gw_config[j].remote_address); printf( "\tremote port : \t%d:\n",enb_properties.properties[i]->rrh_gw_config[j].remote_port); - printf( "\ttransport : \t%s Ethernet:\n\n",(enb_properties.properties[i]->rrh_gw_config[j].raw == 1)? "RAW" : "UDP"); + printf( "\ttx_scheduling_advance :\t%d:\n",enb_properties.properties[i]->rrh_gw_config[j].tx_scheduling_advance); + printf( "\ttx_sample_advance : \t%d:\n",enb_properties.properties[i]->rrh_gw_config[j].tx_sample_advance); + printf( "\tiq_txshift : \t%d:\n",enb_properties.properties[i]->rrh_gw_config[j].iq_txshift); + printf( "\ttransport : \t%s Ethernet:\n",(enb_properties.properties[i]->rrh_gw_config[j].raw == 1)? "RAW" : "UDP"); + if (enb_properties.properties[i]->rrh_gw_config[j].exmimo == 1) { + printf( "\tRF target : \tEXMIMO:\n\n"); + } else if (enb_properties.properties[i]->rrh_gw_config[j].usrp_b200 == 1) { + printf( "\tRF target : \tUSRP_B200:\n\n"); + } else if (enb_properties.properties[i]->rrh_gw_config[j].usrp_x300 == 1) { + printf( "\tRF target : \tUSRP_X300:\n\n"); + } else if (enb_properties.properties[i]->rrh_gw_config[j].bladerf == 1) { + printf( "\tRF target : \tBLADERF:\n\n"); + } else if (enb_properties.properties[i]->rrh_gw_config[j].lmssdr == 1) { + printf( "\tRF target : \tLMSSDR:\n\n"); + } else { + printf( "\tRF target : \tNONE:\n\n"); + } } } @@ -479,14 +499,14 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) config_setting_t *setting_rrh_gw = NULL; config_setting_t *setting_enb = NULL; config_setting_t *setting_otg = NULL; - config_setting_t *subsetting_otg = NULL; + config_setting_t *subsetting_otg = NULL; int num_enb_properties = 0; int enb_properties_index = 0; int num_enbs = 0; int num_mme_address = 0; int num_rrh_gw = 0; - int num_otg_elements =0; - int num_component_carriers =0; + int num_otg_elements = 0; + int num_component_carriers = 0; int i = 0; int j = 0; int parse_errors = 0; @@ -588,6 +608,12 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) char* ipv6 = NULL; char* active = NULL; char* preference = NULL; + + char* tr_preference = NULL; + char* rf_preference = NULL; + libconfig_int tx_scheduling_advance = 0; + libconfig_int tx_sample_advance = 0; + libconfig_int iq_txshift = 0; libconfig_int local_port = 0; libconfig_int remote_port = 0; const char* active_enb[MAX_ENB]; @@ -2180,7 +2206,11 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) && config_setting_lookup_int(setting_rrh_gw, ENB_CONFIG_STRING_RRH_GW_LOCAL_PORT, &local_port) && config_setting_lookup_int(setting_rrh_gw, ENB_CONFIG_STRING_RRH_GW_REMOTE_PORT, &remote_port) && config_setting_lookup_string(setting_rrh_gw, ENB_CONFIG_STRING_RRH_GW_ACTIVE, (const char **)&active) - && config_setting_lookup_string(setting_rrh_gw, ENB_CONFIG_STRING_RRH_GW_PREFERENCE, (const char **)&preference) + && config_setting_lookup_string(setting_rrh_gw, ENB_CONFIG_STRING_RRH_GW_TRANSPORT_PREFERENCE, (const char **)&tr_preference) + && config_setting_lookup_string(setting_rrh_gw, ENB_CONFIG_STRING_RRH_GW_RF_TARGET_PREFERENCE, (const char **)&rf_preference) + && config_setting_lookup_int(setting_rrh_gw, ENB_CONFIG_STRING_RRH_GW_IQ_TXSHIFT, &iq_txshift) + && config_setting_lookup_int(setting_rrh_gw, ENB_CONFIG_STRING_RRH_GW_TX_SAMPLE_ADVANCE, &tx_sample_advance) + && config_setting_lookup_int(setting_rrh_gw, ENB_CONFIG_STRING_RRH_GW_TX_SCHEDULING_ADVANCE, &tx_scheduling_advance) ) ) { AssertError (0, parse_errors ++, @@ -2194,21 +2224,43 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) enb_properties.properties[enb_properties_index]->rrh_gw_if_name = strdup(if_name); enb_properties.properties[enb_properties_index]->rrh_gw_config[j].local_address = strdup(ipv4); enb_properties.properties[enb_properties_index]->rrh_gw_config[j].remote_address = strdup(ipv4_remote); - enb_properties.properties[enb_properties_index]->rrh_gw_config[j].local_port= local_port; - enb_properties.properties[enb_properties_index]->rrh_gw_config[j].remote_port= remote_port; + enb_properties.properties[enb_properties_index]->rrh_gw_config[j].local_port = local_port; + enb_properties.properties[enb_properties_index]->rrh_gw_config[j].remote_port = remote_port; + enb_properties.properties[enb_properties_index]->rrh_gw_config[j].iq_txshift = iq_txshift; + enb_properties.properties[enb_properties_index]->rrh_gw_config[j].tx_sample_advance = tx_sample_advance; + enb_properties.properties[enb_properties_index]->rrh_gw_config[j].tx_scheduling_advance= tx_scheduling_advance; if (strcmp(active, "yes") == 0) { enb_properties.properties[enb_properties_index]->rrh_gw_config[j].active = 1; } - if (strcmp(preference, "udp") == 0) { + if (strcmp(tr_preference, "udp") == 0) { enb_properties.properties[enb_properties_index]->rrh_gw_config[j].udp = 1; - } else if (strcmp(preference, "raw") == 0) { + } else if (strcmp(tr_preference, "raw") == 0) { enb_properties.properties[enb_properties_index]->rrh_gw_config[j].raw = 1; } else {//if (strcmp(preference, "no") == 0) enb_properties.properties[enb_properties_index]->rrh_gw_config[j].udp = 1; enb_properties.properties[enb_properties_index]->rrh_gw_config[j].raw = 1; } + + if (strcmp(rf_preference, "exmimo") == 0) { + enb_properties.properties[enb_properties_index]->rrh_gw_config[j].exmimo = 1; + } else if (strcmp(rf_preference, "usrp_b200") == 0) { + enb_properties.properties[enb_properties_index]->rrh_gw_config[j].usrp_b200 = 1; + } else if (strcmp(rf_preference, "usrp_x300") == 0) { + enb_properties.properties[enb_properties_index]->rrh_gw_config[j].usrp_x300 = 1; + } else if (strcmp(rf_preference, "bladerf") == 0) { + enb_properties.properties[enb_properties_index]->rrh_gw_config[j].bladerf = 1; + } else if (strcmp(rf_preference, "bladerf") == 0) { + enb_properties.properties[enb_properties_index]->rrh_gw_config[j].lmssdr = 1; + } else {//if (strcmp(preference, "no") == 0) + enb_properties.properties[enb_properties_index]->rrh_gw_config[j].exmimo = 1; + enb_properties.properties[enb_properties_index]->rrh_gw_config[j].usrp_b200 = 1; + enb_properties.properties[enb_properties_index]->rrh_gw_config[j].usrp_x300 = 1; + enb_properties.properties[enb_properties_index]->rrh_gw_config[j].bladerf = 1; + enb_properties.properties[enb_properties_index]->rrh_gw_config[j].lmssdr = 1; + + } } } else { enb_properties.properties[enb_properties_index]->nb_rrh_gw = 0; @@ -2220,6 +2272,14 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) enb_properties.properties[enb_properties_index]->rrh_gw_config[j].active = 0; enb_properties.properties[enb_properties_index]->rrh_gw_config[j].udp = 0; enb_properties.properties[enb_properties_index]->rrh_gw_config[j].raw = 0; + enb_properties.properties[enb_properties_index]->rrh_gw_config[j].tx_scheduling_advance = 0; + enb_properties.properties[enb_properties_index]->rrh_gw_config[j].tx_sample_advance = 0; + enb_properties.properties[enb_properties_index]->rrh_gw_config[j].iq_txshift = 0; + enb_properties.properties[enb_properties_index]->rrh_gw_config[j].exmimo = 0; + enb_properties.properties[enb_properties_index]->rrh_gw_config[j].usrp_b200 = 0; + enb_properties.properties[enb_properties_index]->rrh_gw_config[j].usrp_x300 = 0; + enb_properties.properties[enb_properties_index]->rrh_gw_config[j].bladerf = 0; + enb_properties.properties[enb_properties_index]->rrh_gw_config[j].lmssdr = 0; } // SCTP SETTING From 1765790480bd51eda1cd39474b8d432445ca5fb1 Mon Sep 17 00:00:00 2001 From: trilyrak Date: Wed, 17 Feb 2016 13:50:12 +0100 Subject: [PATCH 34/55] updated enb configuration params for rrh --- openair2/ENB_APP/enb_config.h | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/openair2/ENB_APP/enb_config.h b/openair2/ENB_APP/enb_config.h index 9c271ca4f4..422ef67cd3 100755 --- a/openair2/ENB_APP/enb_config.h +++ b/openair2/ENB_APP/enb_config.h @@ -86,7 +86,14 @@ typedef struct rrh_gw_config_s { char *remote_address; uint16_t local_port; uint16_t remote_port; - + int tx_scheduling_advance; + int tx_sample_advance; + int iq_txshift; + unsigned exmimo:1; + unsigned usrp_b200:1; + unsigned usrp_x300:1; + unsigned bladerf:1; + unsigned lmssdr:1; } rrh_gw_config_t; typedef struct Enb_properties_s { From 0da275a81bb1d07733dd96d350de84933d270542 Mon Sep 17 00:00:00 2001 From: trilyrak Date: Wed, 17 Feb 2016 13:51:00 +0100 Subject: [PATCH 35/55] updates for rrh configuration params --- targets/ARCH/COMMON/common_lib.h | 16 ++++++++--- .../ETHERNET/USERSPACE/LIB/ethernet_lib.c | 24 ++++++----------- targets/RT/USER/lte-softmodem.c | 27 ++++++++++++------- 3 files changed, 37 insertions(+), 30 deletions(-) diff --git a/targets/ARCH/COMMON/common_lib.h b/targets/ARCH/COMMON/common_lib.h index 0abe8fd22e..2bd6e4e15d 100644 --- a/targets/ARCH/COMMON/common_lib.h +++ b/targets/ARCH/COMMON/common_lib.h @@ -209,15 +209,23 @@ typedef struct { typedef struct { char *remote_addr; //! remote port number for Ethernet interface - unsigned int remote_port; + uint16_t remote_port; //! local IP/MAC addr for Ethernet interface (eNB/BBU, UE) char *my_addr; //! local port number for Ethernet interface (eNB/BBU, UE) - unsigned int my_port; - //! local port number for Ethernet interface (eNB/BBU, UE) + uint16_t my_port; + //! local Ethernet interface (eNB/BBU, UE) char *local_if_name; - //! local port number for Ethernet interface (eNB/BBU, UE) + //! tx_sample_advance for RF + ETH + uint8_t tx_sample_advance; + //! tx_scheduling_advance for RF + ETH + uint8_t tx_scheduling_advance; + //! iq_txshift for RF + ETH + uint8_t iq_txshift; + //! transport type preference (RAW/UDP) uint8_t transp_preference; + //! radio front end preference (EXMIMO,USRP, BALDERF,LMSSDR) + uint8_t rf_preference; } eth_params_t; diff --git a/targets/ARCH/ETHERNET/USERSPACE/LIB/ethernet_lib.c b/targets/ARCH/ETHERNET/USERSPACE/LIB/ethernet_lib.c index 4fa522f21a..f15f2d98eb 100644 --- a/targets/ARCH/ETHERNET/USERSPACE/LIB/ethernet_lib.c +++ b/targets/ARCH/ETHERNET/USERSPACE/LIB/ethernet_lib.c @@ -344,43 +344,35 @@ int transport_init(openair0_device *device, openair0_config_t *openair0_cfg, eth /* device specific */ openair0_cfg[0].txlaunch_wait = 0;//manage when TX processing is triggered openair0_cfg[0].txlaunch_wait_slotcount = 0; //manage when TX processing is triggered - openair0_cfg[0].iq_txshift = 5;// shift openair0_cfg[0].iq_rxrescale = 15;//rescale iqs + openair0_cfg[0].iq_txshift = eth_params->iq_txshift;// shift + openair0_cfg[0].tx_sample_advance = eth_params->tx_sample_advance; /* RRH does not have any information to make this configuration atm */ if (device->host_type == BBU_HOST) { /*Note scheduling advance values valid only for case 7680000 */ switch ((int)openair0_cfg[0].sample_rate) { case 30720000: - openair0_cfg[0].samples_per_packet = 4096; - openair0_cfg[0].tx_sample_advance = 115; - openair0_cfg[0].tx_scheduling_advance = 11*openair0_cfg[0].samples_per_packet; + openair0_cfg[0].samples_per_packet = 4096; break; case 23040000: openair0_cfg[0].samples_per_packet = 2048; - openair0_cfg[0].tx_sample_advance = 113; - openair0_cfg[0].tx_scheduling_advance = 8*openair0_cfg[0].samples_per_packet; break; case 15360000: - openair0_cfg[0].samples_per_packet = 2048; - openair0_cfg[0].tx_sample_advance = 113; - openair0_cfg[0].tx_scheduling_advance = 9*openair0_cfg[0].samples_per_packet; + openair0_cfg[0].samples_per_packet = 2048; break; case 7680000: - openair0_cfg[0].samples_per_packet = 1024; - openair0_cfg[0].tx_sample_advance = 70; - openair0_cfg[0].tx_scheduling_advance = 9*openair0_cfg[0].samples_per_packet; - break; + openair0_cfg[0].samples_per_packet = 1024; + break; case 1920000: - openair0_cfg[0].samples_per_packet = 256; - openair0_cfg[0].tx_sample_advance = 40; - openair0_cfg[0].tx_scheduling_advance = 8*openair0_cfg[0].samples_per_packet; + openair0_cfg[0].samples_per_packet = 256; break; default: printf("Error: unknown sampling rate %f\n",openair0_cfg[0].sample_rate); exit(-1); break; } + openair0_cfg[0].tx_scheduling_advance = eth_params->tx_scheduling_advance*openair0_cfg[0].samples_per_packet; } device->openair0_cfg=&openair0_cfg[0]; diff --git a/targets/RT/USER/lte-softmodem.c b/targets/RT/USER/lte-softmodem.c index baba632de1..090fd4ecb5 100644 --- a/targets/RT/USER/lte-softmodem.c +++ b/targets/RT/USER/lte-softmodem.c @@ -2443,22 +2443,29 @@ static void get_options (int argc, char **argv) local_remote_radio = BBU_REMOTE_RADIO_HEAD; eth_params = (eth_params_t*)malloc(sizeof(eth_params_t)); memset(eth_params, 0, sizeof(eth_params_t)); - - printf( "\n\tRRH GW %d config for eNB %u:\n\n", j, i); - printf( "\tinterface name : \t%s:\n",enb_properties->properties[i]->rrh_gw_if_name); - printf( "\tlocal address : \t%s:\n",enb_properties->properties[i]->rrh_gw_config[j].local_address); - printf( "\tlocal port : \t%d:\n",enb_properties->properties[i]->rrh_gw_config[j].local_port); - printf( "\tremote address : \t%s:\n",enb_properties->properties[i]->rrh_gw_config[j].remote_address); - printf( "\tremote port : \t%d:\n",enb_properties->properties[i]->rrh_gw_config[j].remote_port); - printf( "\ttransport : \t%s Ethernet:\n\n",(enb_properties->properties[i]->rrh_gw_config[j].raw == 1)? "RAW" : "UDP"); eth_params->local_if_name = enb_properties->properties[i]->rrh_gw_if_name; eth_params->my_addr = enb_properties->properties[i]->rrh_gw_config[j].local_address; eth_params->my_port = enb_properties->properties[i]->rrh_gw_config[j].local_port; eth_params->remote_addr = enb_properties->properties[i]->rrh_gw_config[j].remote_address; eth_params->remote_port = enb_properties->properties[i]->rrh_gw_config[j].remote_port; - eth_params->transp_preference = enb_properties->properties[i]->rrh_gw_config[j].raw; - + eth_params->transp_preference = enb_properties->properties[i]->rrh_gw_config[j].raw; + eth_params->iq_txshift = enb_properties->properties[i]->rrh_gw_config[j].iq_txshift; + eth_params->tx_sample_advance = enb_properties->properties[i]->rrh_gw_config[j].tx_sample_advance; + eth_params->tx_scheduling_advance = enb_properties->properties[i]->rrh_gw_config[j].tx_scheduling_advance; + if (enb_properties->properties[i]->rrh_gw_config[j].exmimo == 1) { + eth_params->rf_preference = EXMIMO_DEV; + } else if (enb_properties->properties[i]->rrh_gw_config[j].usrp_b200 == 1) { + eth_params->rf_preference = USRP_B200_DEV; + } else if (enb_properties->properties[i]->rrh_gw_config[j].usrp_x300 == 1) { + eth_params->rf_preference = USRP_X300_DEV; + } else if (enb_properties->properties[i]->rrh_gw_config[j].bladerf == 1) { + eth_params->rf_preference = BLADERF_DEV; + } else if (enb_properties->properties[i]->rrh_gw_config[j].lmssdr == 1) { + //eth_params->rf_preference = LMSSDR_DEV; + } else { + eth_params->rf_preference = 0; + } } else { local_remote_radio = BBU_LOCAL_RADIO_HEAD; } From 0c104f3313bdcf7a6a86c695b624a5a707a8b578 Mon Sep 17 00:00:00 2001 From: trilyrak Date: Wed, 17 Feb 2016 13:51:24 +0100 Subject: [PATCH 36/55] update config file for rrh --- .../CONF/enb.band7.tm1.rrh.usrpb210.conf | 22 ++++++++++++------- 1 file changed, 14 insertions(+), 8 deletions(-) diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf index e8d49cca18..71d8fe7f34 100644 --- a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf +++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf @@ -143,28 +143,34 @@ eNBs = rrh_gw_config = ( { local_if_name = "eth0"; - remote_address = "169.254.8.28"; + remote_address = "169.254.10.158"; + local_address = "169.254.8.15"; #remote_address = "127.0.0.1"; - #remote_address = "74:d4:35:cc:88:45"; - local_address = "169.254.7.91"; + #remote_address = "74:d4:35:cc:88:45"; #local_address = "127.0.0.1"; #local_address = "d4:be:d9:22:0a:ac"; #for raw option local port must be the same to remote local_port = 50001; remote_port = 50000; active = "yes"; - preference = "udp"; + tr_preference = "udp"; + rf_preference = "usrp_b200"; + iq_txshift = 8; + tx_sample_advance = 50; + tx_scheduling_advance = 100; } ); NETWORK_INTERFACES : { - ENB_INTERFACE_NAME_FOR_S1_MME = "eth0"; - ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.242/24"; + ENB_INTERFACE_NAME_FOR_S1_MME = "eth6"; + ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.118/24"; - ENB_INTERFACE_NAME_FOR_S1U = "eth0"; - ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.242/24"; + ENB_INTERFACE_NAME_FOR_S1U = "eth6"; + + + ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.118/24"; ENB_PORT_FOR_S1U = 2152; # Spec 2152 }; From 21a62e94b1a8fdbe3532dbdd0310bf604409cde6 Mon Sep 17 00:00:00 2001 From: trilyrak Date: Wed, 17 Feb 2016 14:27:48 +0100 Subject: [PATCH 37/55] update/add config files for rrh + USRP/LMSSDR 5/10MHz --- .../CONF/enb.band7.tm1.50PRB.rrh.lmssdr.conf | 192 ++++++++++++++++++ .../enb.band7.tm1.50PRB.rrh.usrpb210.conf | 192 ++++++++++++++++++ .../CONF/enb.band7.tm1.rrh.lmssdr.conf | 192 ++++++++++++++++++ .../CONF/enb.band7.tm1.rrh.usrpb210.conf | 21 +- 4 files changed, 585 insertions(+), 12 deletions(-) create mode 100644 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.rrh.lmssdr.conf create mode 100644 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.rrh.usrpb210.conf create mode 100644 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.lmssdr.conf diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.rrh.lmssdr.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.rrh.lmssdr.conf new file mode 100644 index 0000000000..604226c31a --- /dev/null +++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.rrh.lmssdr.conf @@ -0,0 +1,192 @@ +Active_eNBs = ( "eNB_Eurecom_LTEBox"); +# Asn1_verbosity, choice in: none, info, annoying +Asn1_verbosity = "none"; + +eNBs = +( + { + ////////// Identification parameters: + eNB_ID = 0xe00; + + cell_type = "CELL_MACRO_ENB"; + + eNB_name = "eNB_Eurecom_LTEBox"; + + // Tracking area code, 0x0000 and 0xfffe are reserved values + tracking_area_code = "1"; + + mobile_country_code = "208"; + + mobile_network_code = "93"; + + ////////// Physical parameters: + + component_carriers = ( + { + frame_type = "FDD"; + tdd_config = 3; + tdd_config_s = 0; + prefix_type = "NORMAL"; + eutra_band = 7; + downlink_frequency = 2660000000L; + uplink_frequency_offset = -120000000; + Nid_cell = 0; + N_RB_DL = 50; + Nid_cell_mbsfn = 0; + nb_antennas_tx = 1; + nb_antennas_rx = 1; + tx_gain = 60; + rx_gain = 111; + prach_root = 0; + prach_config_index = 0; + prach_high_speed = "DISABLE"; + prach_zero_correlation = 1; + prach_freq_offset = 2; + pucch_delta_shift = 1; + pucch_nRB_CQI = 1; + pucch_nCS_AN = 0; + pucch_n1_AN = 32; + pdsch_referenceSignalPower = -29; + pdsch_p_b = 0; + pusch_n_SB = 1; + pusch_enable64QAM = "DISABLE"; + pusch_hoppingMode = "interSubFrame"; + pusch_hoppingOffset = 0; + pusch_groupHoppingEnabled = "ENABLE"; + pusch_groupAssignment = 0; + pusch_sequenceHoppingEnabled = "DISABLE"; + pusch_nDMRS1 = 1; + phich_duration = "NORMAL"; + phich_resource = "ONESIXTH"; + srs_enable = "DISABLE"; + /* srs_BandwidthConfig =; + srs_SubframeConfig =; + srs_ackNackST =; + srs_MaxUpPts =;*/ + + pusch_p0_Nominal = -85; + pusch_alpha = "AL1"; + pucch_p0_Nominal = -96; + msg3_delta_Preamble = 6; + pucch_deltaF_Format1 = "deltaF2"; + pucch_deltaF_Format1b = "deltaF3"; + pucch_deltaF_Format2 = "deltaF0"; + pucch_deltaF_Format2a = "deltaF0"; + pucch_deltaF_Format2b = "deltaF0"; + + rach_numberOfRA_Preambles = 64; + rach_preamblesGroupAConfig = "DISABLE"; +/* + rach_sizeOfRA_PreamblesGroupA = ; + rach_messageSizeGroupA = ; + rach_messagePowerOffsetGroupB = ; +*/ + rach_powerRampingStep = 4; + rach_preambleInitialReceivedTargetPower = -100; + rach_preambleTransMax = 10; + rach_raResponseWindowSize = 10; + rach_macContentionResolutionTimer = 48; + rach_maxHARQ_Msg3Tx = 4; + + pcch_default_PagingCycle = 128; + pcch_nB = "oneT"; + bcch_modificationPeriodCoeff = 2; + ue_TimersAndConstants_t300 = 1000; + ue_TimersAndConstants_t301 = 1000; + ue_TimersAndConstants_t310 = 1000; + ue_TimersAndConstants_t311 = 10000; + ue_TimersAndConstants_n310 = 20; + ue_TimersAndConstants_n311 = 1; + + } + ); + + + srb1_parameters : + { + # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500] + timer_poll_retransmit = 80; + + # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200] + timer_reordering = 35; + + # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500] + timer_status_prohibit = 0; + + # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)] + poll_pdu = 4; + + # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)] + poll_byte = 99999; + + # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32] + max_retx_threshold = 4; + } + + # ------- SCTP definitions + SCTP : + { + # Number of streams to use in input/output + SCTP_INSTREAMS = 2; + SCTP_OUTSTREAMS = 2; + }; + + + ////////// MME parameters: + mme_ip_address = ( { ipv4 = "192.168.12.170"; + ipv6 = "192:168:30::17"; + active = "yes"; + preference = "ipv4"; + } + ); + +rrh_gw_config = ( + { + local_if_name = "eth0"; + #remote_address = "169.254.10.158"; + #local_address = "169.254.8.15"; + remote_address = "74:d4:35:cc:88:45"; + local_address = "d4:be:d9:22:0a:ac"; + local_port = 50000; #for raw option local port must be the same to remote + remote_port = 50000; + active = "yes"; + tr_preference = "raw"; + rf_preference = "lmssdr"; + iq_txshift = 0; + tx_sample_advance = 45; + tx_scheduling_advance = 8; + +} +); + + NETWORK_INTERFACES : + { + ENB_INTERFACE_NAME_FOR_S1_MME = "eth6"; + ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.118/24"; + + ENB_INTERFACE_NAME_FOR_S1U = "eth6"; + + + ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.118/24"; + ENB_PORT_FOR_S1U = 2152; # Spec 2152 + }; + + log_config : + { + global_log_level ="info"; + global_log_verbosity ="medium"; + hw_log_level ="info"; + hw_log_verbosity ="medium"; + phy_log_level ="info"; + phy_log_verbosity ="medium"; + mac_log_level ="info"; + mac_log_verbosity ="high"; + rlc_log_level ="info"; + rlc_log_verbosity ="medium"; + pdcp_log_level ="info"; + pdcp_log_verbosity ="medium"; + rrc_log_level ="info"; + rrc_log_verbosity ="medium"; + }; + } +); diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.rrh.usrpb210.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.rrh.usrpb210.conf new file mode 100644 index 0000000000..abaf8de6ee --- /dev/null +++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.rrh.usrpb210.conf @@ -0,0 +1,192 @@ +Active_eNBs = ( "eNB_Eurecom_LTEBox"); +# Asn1_verbosity, choice in: none, info, annoying +Asn1_verbosity = "none"; + +eNBs = +( + { + ////////// Identification parameters: + eNB_ID = 0xe00; + + cell_type = "CELL_MACRO_ENB"; + + eNB_name = "eNB_Eurecom_LTEBox"; + + // Tracking area code, 0x0000 and 0xfffe are reserved values + tracking_area_code = "1"; + + mobile_country_code = "208"; + + mobile_network_code = "92"; + + ////////// Physical parameters: + + component_carriers = ( + { + frame_type = "FDD"; + tdd_config = 3; + tdd_config_s = 0; + prefix_type = "NORMAL"; + eutra_band = 7; + downlink_frequency = 2660000000L; + uplink_frequency_offset = -120000000; + Nid_cell = 0; + N_RB_DL = 25; + Nid_cell_mbsfn = 0; + nb_antennas_tx = 1; + nb_antennas_rx = 1; + tx_gain = 90; + rx_gain = 125; + prach_root = 0; + prach_config_index = 0; + prach_high_speed = "DISABLE"; + prach_zero_correlation = 1; + prach_freq_offset = 2; + pucch_delta_shift = 1; + pucch_nRB_CQI = 1; + pucch_nCS_AN = 0; + pucch_n1_AN = 32; + pdsch_referenceSignalPower = -29; + pdsch_p_b = 0; + pusch_n_SB = 1; + pusch_enable64QAM = "DISABLE"; + pusch_hoppingMode = "interSubFrame"; + pusch_hoppingOffset = 0; + pusch_groupHoppingEnabled = "ENABLE"; + pusch_groupAssignment = 0; + pusch_sequenceHoppingEnabled = "DISABLE"; + pusch_nDMRS1 = 1; + phich_duration = "NORMAL"; + phich_resource = "ONESIXTH"; + srs_enable = "DISABLE"; + /* srs_BandwidthConfig =; + srs_SubframeConfig =; + srs_ackNackST =; + srs_MaxUpPts =;*/ + + pusch_p0_Nominal = -90; + pusch_alpha = "AL1"; + pucch_p0_Nominal = -96; + msg3_delta_Preamble = 6; + pucch_deltaF_Format1 = "deltaF2"; + pucch_deltaF_Format1b = "deltaF3"; + pucch_deltaF_Format2 = "deltaF0"; + pucch_deltaF_Format2a = "deltaF0"; + pucch_deltaF_Format2b = "deltaF0"; + + rach_numberOfRA_Preambles = 64; + rach_preamblesGroupAConfig = "DISABLE"; + /* + rach_sizeOfRA_PreamblesGroupA = ; + rach_messageSizeGroupA = ; + rach_messagePowerOffsetGroupB = ; + */ + rach_powerRampingStep = 4; + rach_preambleInitialReceivedTargetPower = -108; + rach_preambleTransMax = 10; + rach_raResponseWindowSize = 10; + rach_macContentionResolutionTimer = 48; + rach_maxHARQ_Msg3Tx = 4; + + pcch_default_PagingCycle = 128; + pcch_nB = "oneT"; + bcch_modificationPeriodCoeff = 2; + ue_TimersAndConstants_t300 = 1000; + ue_TimersAndConstants_t301 = 1000; + ue_TimersAndConstants_t310 = 1000; + ue_TimersAndConstants_t311 = 10000; + ue_TimersAndConstants_n310 = 20; + ue_TimersAndConstants_n311 = 1; + + } + ); + + + srb1_parameters : + { + # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500] + timer_poll_retransmit = 80; + + # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200] + timer_reordering = 35; + + # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500] + timer_status_prohibit = 0; + + # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)] + poll_pdu = 4; + + # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)] + poll_byte = 99999; + + # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32] + max_retx_threshold = 4; + } + + # ------- SCTP definitions + SCTP : + { + # Number of streams to use in input/output + SCTP_INSTREAMS = 2; + SCTP_OUTSTREAMS = 2; + }; + + + ////////// MME parameters: + mme_ip_address = ( { ipv4 = "192.168.12.170"; + ipv6 = "192:168:30::17"; + active = "yes"; + preference = "ipv4"; + } + ); + +rrh_gw_config = ( + { + local_if_name = "eth0"; + #remote_address = "169.254.10.158"; + #local_address = "169.254.8.15"; + remote_address = "74:d4:35:cc:88:45"; + local_address = "d4:be:d9:22:0a:ac"; + local_port = 50000; #for raw option local port must be the same to remote + remote_port = 50000; + active = "yes"; + tr_preference = "raw"; + rf_preference = "usrp_b200"; + iq_txshift = 5; + tx_sample_advance = 113; + tx_scheduling_advance = 8; + +} +); + + NETWORK_INTERFACES : + { + ENB_INTERFACE_NAME_FOR_S1_MME = "eth6"; + ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.118/24"; + + ENB_INTERFACE_NAME_FOR_S1U = "eth6"; + + + ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.118/24"; + ENB_PORT_FOR_S1U = 2152; # Spec 2152 + }; + + log_config : + { + global_log_level ="info"; + global_log_verbosity ="medium"; + hw_log_level ="info"; + hw_log_verbosity ="medium"; + phy_log_level ="info"; + phy_log_verbosity ="medium"; + mac_log_level ="info"; + mac_log_verbosity ="high"; + rlc_log_level ="info"; + rlc_log_verbosity ="medium"; + pdcp_log_level ="info"; + pdcp_log_verbosity ="medium"; + rrc_log_level ="info"; + rrc_log_verbosity ="medium"; + }; + } +); diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.lmssdr.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.lmssdr.conf new file mode 100644 index 0000000000..93afe062e9 --- /dev/null +++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.lmssdr.conf @@ -0,0 +1,192 @@ +Active_eNBs = ( "eNB_Eurecom_LTEBox"); +# Asn1_verbosity, choice in: none, info, annoying +Asn1_verbosity = "none"; + +eNBs = +( + { + ////////// Identification parameters: + eNB_ID = 0xe00; + + cell_type = "CELL_MACRO_ENB"; + + eNB_name = "eNB_Eurecom_LTEBox"; + + // Tracking area code, 0x0000 and 0xfffe are reserved values + tracking_area_code = "1"; + + mobile_country_code = "208"; + + mobile_network_code = "92"; + + ////////// Physical parameters: + + component_carriers = ( + { + frame_type = "FDD"; + tdd_config = 3; + tdd_config_s = 0; + prefix_type = "NORMAL"; + eutra_band = 7; + downlink_frequency = 2660000000L; + uplink_frequency_offset = -120000000; + Nid_cell = 0; + N_RB_DL = 25; + Nid_cell_mbsfn = 0; + nb_antennas_tx = 1; + nb_antennas_rx = 1; + tx_gain = 60; + rx_gain = 111; + prach_root = 0; + prach_config_index = 0; + prach_high_speed = "DISABLE"; + prach_zero_correlation = 1; + prach_freq_offset = 2; + pucch_delta_shift = 1; + pucch_nRB_CQI = 1; + pucch_nCS_AN = 0; + pucch_n1_AN = 32; + pdsch_referenceSignalPower = -29; + pdsch_p_b = 0; + pusch_n_SB = 1; + pusch_enable64QAM = "DISABLE"; + pusch_hoppingMode = "interSubFrame"; + pusch_hoppingOffset = 0; + pusch_groupHoppingEnabled = "ENABLE"; + pusch_groupAssignment = 0; + pusch_sequenceHoppingEnabled = "DISABLE"; + pusch_nDMRS1 = 1; + phich_duration = "NORMAL"; + phich_resource = "ONESIXTH"; + srs_enable = "DISABLE"; + /* srs_BandwidthConfig =; + srs_SubframeConfig =; + srs_ackNackST =; + srs_MaxUpPts =;*/ + + pusch_p0_Nominal = -85; + pusch_alpha = "AL1"; + pucch_p0_Nominal = -96; + msg3_delta_Preamble = 6; + pucch_deltaF_Format1 = "deltaF2"; + pucch_deltaF_Format1b = "deltaF3"; + pucch_deltaF_Format2 = "deltaF0"; + pucch_deltaF_Format2a = "deltaF0"; + pucch_deltaF_Format2b = "deltaF0"; + + rach_numberOfRA_Preambles = 64; + rach_preamblesGroupAConfig = "DISABLE"; +/* + rach_sizeOfRA_PreamblesGroupA = ; + rach_messageSizeGroupA = ; + rach_messagePowerOffsetGroupB = ; +*/ + rach_powerRampingStep = 4; + rach_preambleInitialReceivedTargetPower = -100; + rach_preambleTransMax = 10; + rach_raResponseWindowSize = 10; + rach_macContentionResolutionTimer = 48; + rach_maxHARQ_Msg3Tx = 4; + + pcch_default_PagingCycle = 128; + pcch_nB = "oneT"; + bcch_modificationPeriodCoeff = 2; + ue_TimersAndConstants_t300 = 1000; + ue_TimersAndConstants_t301 = 1000; + ue_TimersAndConstants_t310 = 1000; + ue_TimersAndConstants_t311 = 10000; + ue_TimersAndConstants_n310 = 20; + ue_TimersAndConstants_n311 = 1; + + } + ); + + + srb1_parameters : + { + # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500] + timer_poll_retransmit = 80; + + # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200] + timer_reordering = 35; + + # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500] + timer_status_prohibit = 0; + + # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)] + poll_pdu = 4; + + # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)] + poll_byte = 99999; + + # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32] + max_retx_threshold = 4; + } + + # ------- SCTP definitions + SCTP : + { + # Number of streams to use in input/output + SCTP_INSTREAMS = 2; + SCTP_OUTSTREAMS = 2; + }; + + + ////////// MME parameters: + mme_ip_address = ( { ipv4 = "192.168.12.170"; + ipv6 = "192:168:30::17"; + active = "yes"; + preference = "ipv4"; + } + ); + +rrh_gw_config = ( + { + local_if_name = "eth0"; + #remote_address = "169.254.10.158"; + #local_address = "169.254.8.15"; + remote_address = "74:d4:35:cc:88:45"; + local_address = "d4:be:d9:22:0a:ac"; + local_port = 50000; #for raw option local port must be the same to remote + remote_port = 50000; + active = "yes"; + tr_preference = "raw"; + rf_preference = "lmssdr"; + iq_txshift = 0; + tx_sample_advance = 70; + tx_scheduling_advance = 8; + +} +); + + NETWORK_INTERFACES : + { + ENB_INTERFACE_NAME_FOR_S1_MME = "eth6"; + ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.118/24"; + + ENB_INTERFACE_NAME_FOR_S1U = "eth6"; + + + ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.118/24"; + ENB_PORT_FOR_S1U = 2152; # Spec 2152 + }; + + log_config : + { + global_log_level ="info"; + global_log_verbosity ="medium"; + hw_log_level ="info"; + hw_log_verbosity ="medium"; + phy_log_level ="info"; + phy_log_verbosity ="medium"; + mac_log_level ="info"; + mac_log_verbosity ="high"; + rlc_log_level ="info"; + rlc_log_verbosity ="medium"; + pdcp_log_level ="info"; + pdcp_log_verbosity ="medium"; + rrc_log_level ="info"; + rrc_log_verbosity ="medium"; + }; + } +); diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf index 71d8fe7f34..82ca458085 100644 --- a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf +++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf @@ -143,21 +143,18 @@ eNBs = rrh_gw_config = ( { local_if_name = "eth0"; - remote_address = "169.254.10.158"; - local_address = "169.254.8.15"; - #remote_address = "127.0.0.1"; - #remote_address = "74:d4:35:cc:88:45"; - #local_address = "127.0.0.1"; - #local_address = "d4:be:d9:22:0a:ac"; - #for raw option local port must be the same to remote - local_port = 50001; + #remote_address = "169.254.10.158"; + #local_address = "169.254.8.15"; + remote_address = "74:d4:35:cc:88:45"; + local_address = "d4:be:d9:22:0a:ac"; + local_port = 50000; #for raw option local port must be the same to remote remote_port = 50000; active = "yes"; - tr_preference = "udp"; + tr_preference = "raw"; rf_preference = "usrp_b200"; - iq_txshift = 8; - tx_sample_advance = 50; - tx_scheduling_advance = 100; + iq_txshift = 5; + tx_sample_advance = 70; + tx_scheduling_advance = 8; } ); From d13bb9d70345a5893f8247353396369d047e1675 Mon Sep 17 00:00:00 2001 From: Rohit Gupta Date: Wed, 17 Feb 2016 16:24:00 +0100 Subject: [PATCH 38/55] update config files for rrh + usrp --- .../enb.band7.tm1.50PRB.rrh.usrpb210.conf | 160 +++++++++--------- .../CONF/enb.band7.tm1.rrh.usrpb210.conf | 14 +- 2 files changed, 86 insertions(+), 88 deletions(-) diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.rrh.usrpb210.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.rrh.usrpb210.conf index abaf8de6ee..c42e1b7864 100644 --- a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.rrh.usrpb210.conf +++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.rrh.usrpb210.conf @@ -5,7 +5,7 @@ Asn1_verbosity = "none"; eNBs = ( { - ////////// Identification parameters: + ////////// Identification parameters: eNB_ID = 0xe00; cell_type = "CELL_MACRO_ENB"; @@ -23,85 +23,83 @@ eNBs = component_carriers = ( { - frame_type = "FDD"; - tdd_config = 3; - tdd_config_s = 0; - prefix_type = "NORMAL"; - eutra_band = 7; - downlink_frequency = 2660000000L; - uplink_frequency_offset = -120000000; - Nid_cell = 0; - N_RB_DL = 25; - Nid_cell_mbsfn = 0; - nb_antennas_tx = 1; - nb_antennas_rx = 1; - tx_gain = 90; - rx_gain = 125; - prach_root = 0; - prach_config_index = 0; - prach_high_speed = "DISABLE"; - prach_zero_correlation = 1; - prach_freq_offset = 2; - pucch_delta_shift = 1; - pucch_nRB_CQI = 1; - pucch_nCS_AN = 0; - pucch_n1_AN = 32; - pdsch_referenceSignalPower = -29; - pdsch_p_b = 0; - pusch_n_SB = 1; - pusch_enable64QAM = "DISABLE"; - pusch_hoppingMode = "interSubFrame"; - pusch_hoppingOffset = 0; - pusch_groupHoppingEnabled = "ENABLE"; - pusch_groupAssignment = 0; - pusch_sequenceHoppingEnabled = "DISABLE"; - pusch_nDMRS1 = 1; - phich_duration = "NORMAL"; - phich_resource = "ONESIXTH"; - srs_enable = "DISABLE"; - /* srs_BandwidthConfig =; - srs_SubframeConfig =; - srs_ackNackST =; - srs_MaxUpPts =;*/ + frame_type = "FDD"; + tdd_config = 3; + tdd_config_s = 0; + prefix_type = "NORMAL"; + eutra_band = 7; + downlink_frequency = 2680000000L; + uplink_frequency_offset = -120000000; + Nid_cell = 0; + N_RB_DL = 50; + Nid_cell_mbsfn = 0; + nb_antennas_tx = 1; + nb_antennas_rx = 1; + tx_gain = 90; + rx_gain = 125; + prach_root = 0; + prach_config_index = 0; + prach_high_speed = "DISABLE"; + prach_zero_correlation = 1; + prach_freq_offset = 2; + pucch_delta_shift = 1; + pucch_nRB_CQI = 1; + pucch_nCS_AN = 0; + pucch_n1_AN = 32; + pdsch_referenceSignalPower = -29; + pdsch_p_b = 0; + pusch_n_SB = 1; + pusch_enable64QAM = "DISABLE"; + pusch_hoppingMode = "interSubFrame"; + pusch_hoppingOffset = 0; + pusch_groupHoppingEnabled = "ENABLE"; + pusch_groupAssignment = 0; + pusch_sequenceHoppingEnabled = "DISABLE"; + pusch_nDMRS1 = 1; + phich_duration = "NORMAL"; + phich_resource = "ONESIXTH"; + srs_enable = "DISABLE"; + /* srs_BandwidthConfig =; + srs_SubframeConfig =; + srs_ackNackST =; + srs_MaxUpPts =;*/ - pusch_p0_Nominal = -90; - pusch_alpha = "AL1"; - pucch_p0_Nominal = -96; - msg3_delta_Preamble = 6; - pucch_deltaF_Format1 = "deltaF2"; - pucch_deltaF_Format1b = "deltaF3"; - pucch_deltaF_Format2 = "deltaF0"; - pucch_deltaF_Format2a = "deltaF0"; - pucch_deltaF_Format2b = "deltaF0"; + pusch_p0_Nominal = -90; + pusch_alpha = "AL1"; + pucch_p0_Nominal = -96; + msg3_delta_Preamble = 6; + pucch_deltaF_Format1 = "deltaF2"; + pucch_deltaF_Format1b = "deltaF3"; + pucch_deltaF_Format2 = "deltaF0"; + pucch_deltaF_Format2a = "deltaF0"; + pucch_deltaF_Format2b = "deltaF0"; - rach_numberOfRA_Preambles = 64; - rach_preamblesGroupAConfig = "DISABLE"; - /* - rach_sizeOfRA_PreamblesGroupA = ; - rach_messageSizeGroupA = ; - rach_messagePowerOffsetGroupB = ; - */ - rach_powerRampingStep = 4; - rach_preambleInitialReceivedTargetPower = -108; - rach_preambleTransMax = 10; - rach_raResponseWindowSize = 10; - rach_macContentionResolutionTimer = 48; - rach_maxHARQ_Msg3Tx = 4; - - pcch_default_PagingCycle = 128; - pcch_nB = "oneT"; - bcch_modificationPeriodCoeff = 2; - ue_TimersAndConstants_t300 = 1000; - ue_TimersAndConstants_t301 = 1000; - ue_TimersAndConstants_t310 = 1000; - ue_TimersAndConstants_t311 = 10000; - ue_TimersAndConstants_n310 = 20; - ue_TimersAndConstants_n311 = 1; + rach_numberOfRA_Preambles = 64; + rach_preamblesGroupAConfig = "DISABLE"; + /* + rach_sizeOfRA_PreamblesGroupA = ; + rach_messageSizeGroupA = ; + rach_messagePowerOffsetGroupB = ; + */ + rach_powerRampingStep = 4; + rach_preambleInitialReceivedTargetPower = -108; + rach_preambleTransMax = 10; + rach_raResponseWindowSize = 10; + rach_macContentionResolutionTimer = 48; + rach_maxHARQ_Msg3Tx = 4; + pcch_default_PagingCycle = 128; + pcch_nB = "oneT"; + bcch_modificationPeriodCoeff = 2; + ue_TimersAndConstants_t300 = 1000; + ue_TimersAndConstants_t301 = 1000; + ue_TimersAndConstants_t310 = 1000; + ue_TimersAndConstants_t311 = 10000; + ue_TimersAndConstants_n310 = 20; + ue_TimersAndConstants_n311 = 1; } ); - srb1_parameters : { # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500] @@ -133,7 +131,7 @@ eNBs = ////////// MME parameters: - mme_ip_address = ( { ipv4 = "192.168.12.170"; + mme_ip_address = ( { ipv4 = "192.168.12.26"; ipv6 = "192:168:30::17"; active = "yes"; preference = "ipv4"; @@ -146,7 +144,7 @@ rrh_gw_config = ( #remote_address = "169.254.10.158"; #local_address = "169.254.8.15"; remote_address = "74:d4:35:cc:88:45"; - local_address = "d4:be:d9:22:0a:ac"; + local_address = "98:90:96:df:66:07"; local_port = 50000; #for raw option local port must be the same to remote remote_port = 50000; active = "yes"; @@ -154,20 +152,20 @@ rrh_gw_config = ( rf_preference = "usrp_b200"; iq_txshift = 5; tx_sample_advance = 113; - tx_scheduling_advance = 8; + tx_scheduling_advance = 9; } ); NETWORK_INTERFACES : { - ENB_INTERFACE_NAME_FOR_S1_MME = "eth6"; - ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.118/24"; + ENB_INTERFACE_NAME_FOR_S1_MME = "eth4"; + ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.111/24"; - ENB_INTERFACE_NAME_FOR_S1U = "eth6"; + ENB_INTERFACE_NAME_FOR_S1U = "eth4"; - ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.118/24"; + ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.111/24"; ENB_PORT_FOR_S1U = 2152; # Spec 2152 }; diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf index 82ca458085..6b74698849 100644 --- a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf +++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf @@ -133,7 +133,7 @@ eNBs = ////////// MME parameters: - mme_ip_address = ( { ipv4 = "192.168.12.170"; + mme_ip_address = ( { ipv4 = "192.168.12.26"; ipv6 = "192:168:30::17"; active = "yes"; preference = "ipv4"; @@ -146,7 +146,7 @@ rrh_gw_config = ( #remote_address = "169.254.10.158"; #local_address = "169.254.8.15"; remote_address = "74:d4:35:cc:88:45"; - local_address = "d4:be:d9:22:0a:ac"; + local_address = "98:90:96:df:66:07"; local_port = 50000; #for raw option local port must be the same to remote remote_port = 50000; active = "yes"; @@ -154,20 +154,20 @@ rrh_gw_config = ( rf_preference = "usrp_b200"; iq_txshift = 5; tx_sample_advance = 70; - tx_scheduling_advance = 8; + tx_scheduling_advance = 9; } ); NETWORK_INTERFACES : { - ENB_INTERFACE_NAME_FOR_S1_MME = "eth6"; - ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.118/24"; + ENB_INTERFACE_NAME_FOR_S1_MME = "eth4"; + ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.111/24"; - ENB_INTERFACE_NAME_FOR_S1U = "eth6"; + ENB_INTERFACE_NAME_FOR_S1U = "eth4"; - ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.118/24"; + ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.111/24"; ENB_PORT_FOR_S1U = 2152; # Spec 2152 }; From e3c4cc9d79d6655457fff1db2c44a87a6c947b49 Mon Sep 17 00:00:00 2001 From: Aikaterini Date: Wed, 17 Feb 2016 17:08:18 +0100 Subject: [PATCH 39/55] fix name of SoDERA SDR config files --- ...a.conf => enb.band7.tm1.50PRB.lmssdr.conf} | 0 .../CONF/enb.band7.tm1.50PRB.rrh.sodera.conf | 190 ----------------- ....sedora.conf => enb.band7.tm1.lmssdr.conf} | 0 .../CONF/enb.band7.tm1.rrh.sodera.conf | 192 ------------------ 4 files changed, 382 deletions(-) rename targets/PROJECTS/GENERIC-LTE-EPC/CONF/{enb.band7.tm1.50PRB.sedora.conf => enb.band7.tm1.50PRB.lmssdr.conf} (100%) delete mode 100644 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.rrh.sodera.conf rename targets/PROJECTS/GENERIC-LTE-EPC/CONF/{enb.band7.tm1.sedora.conf => enb.band7.tm1.lmssdr.conf} (100%) delete mode 100644 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.sodera.conf diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.sedora.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.lmssdr.conf similarity index 100% rename from targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.sedora.conf rename to targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.lmssdr.conf diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.rrh.sodera.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.rrh.sodera.conf deleted file mode 100644 index c3985c9dce..0000000000 --- a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.rrh.sodera.conf +++ /dev/null @@ -1,190 +0,0 @@ -Active_eNBs = ( "eNB_Eurecom_LTEBox"); -# Asn1_verbosity, choice in: none, info, annoying -Asn1_verbosity = "none"; - -eNBs = -( - { - ////////// Identification parameters: - eNB_ID = 0xe00; - - cell_type = "CELL_MACRO_ENB"; - - eNB_name = "eNB_Eurecom_LTEBox"; - - // Tracking area code, 0x0000 and 0xfffe are reserved values - tracking_area_code = "1"; - - mobile_country_code = "208"; - - mobile_network_code = "93"; - - ////////// Physical parameters: - - component_carriers = ( - { - frame_type = "FDD"; - tdd_config = 3; - tdd_config_s = 0; - prefix_type = "NORMAL"; - eutra_band = 7; - downlink_frequency = 2660000000L; - uplink_frequency_offset = -120000000; - Nid_cell = 0; - N_RB_DL = 50; - Nid_cell_mbsfn = 0; - nb_antennas_tx = 1; - nb_antennas_rx = 1; - tx_gain = 60; - rx_gain = 111; - prach_root = 0; - prach_config_index = 0; - prach_high_speed = "DISABLE"; - prach_zero_correlation = 1; - prach_freq_offset = 2; - pucch_delta_shift = 1; - pucch_nRB_CQI = 1; - pucch_nCS_AN = 0; - pucch_n1_AN = 32; - pdsch_referenceSignalPower = -29; - pdsch_p_b = 0; - pusch_n_SB = 1; - pusch_enable64QAM = "DISABLE"; - pusch_hoppingMode = "interSubFrame"; - pusch_hoppingOffset = 0; - pusch_groupHoppingEnabled = "ENABLE"; - pusch_groupAssignment = 0; - pusch_sequenceHoppingEnabled = "DISABLE"; - pusch_nDMRS1 = 1; - phich_duration = "NORMAL"; - phich_resource = "ONESIXTH"; - srs_enable = "DISABLE"; - /* srs_BandwidthConfig =; - srs_SubframeConfig =; - srs_ackNackST =; - srs_MaxUpPts =;*/ - - pusch_p0_Nominal = -85; - pusch_alpha = "AL1"; - pucch_p0_Nominal = -96; - msg3_delta_Preamble = 6; - pucch_deltaF_Format1 = "deltaF2"; - pucch_deltaF_Format1b = "deltaF3"; - pucch_deltaF_Format2 = "deltaF0"; - pucch_deltaF_Format2a = "deltaF0"; - pucch_deltaF_Format2b = "deltaF0"; - - rach_numberOfRA_Preambles = 64; - rach_preamblesGroupAConfig = "DISABLE"; -/* - rach_sizeOfRA_PreamblesGroupA = ; - rach_messageSizeGroupA = ; - rach_messagePowerOffsetGroupB = ; -*/ - rach_powerRampingStep = 4; - rach_preambleInitialReceivedTargetPower = -100; - rach_preambleTransMax = 10; - rach_raResponseWindowSize = 10; - rach_macContentionResolutionTimer = 48; - rach_maxHARQ_Msg3Tx = 4; - - pcch_default_PagingCycle = 128; - pcch_nB = "oneT"; - bcch_modificationPeriodCoeff = 2; - ue_TimersAndConstants_t300 = 1000; - ue_TimersAndConstants_t301 = 1000; - ue_TimersAndConstants_t310 = 1000; - ue_TimersAndConstants_t311 = 10000; - ue_TimersAndConstants_n310 = 20; - ue_TimersAndConstants_n311 = 1; - - } - ); - - - srb1_parameters : - { - # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500] - timer_poll_retransmit = 80; - - # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200] - timer_reordering = 35; - - # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500] - timer_status_prohibit = 0; - - # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)] - poll_pdu = 4; - - # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)] - poll_byte = 99999; - - # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32] - max_retx_threshold = 4; - } - - # ------- SCTP definitions - SCTP : - { - # Number of streams to use in input/output - SCTP_INSTREAMS = 2; - SCTP_OUTSTREAMS = 2; - }; - - ////////// MME parameters: - mme_ip_address = ( { ipv4 = "192.168.12.11"; - ipv6 = "192:168:30::17"; - active = "yes"; - preference = "ipv4"; - } - ); - - -rrh_gw_config = ( - { - local_if_name = "eth0"; - remote_address = "169.254.8.28"; - #remote_address = "127.0.0.1"; - #remote_address = "74:d4:35:cc:88:45"; - local_address = "169.254.7.91"; - #local_address = "127.0.0.1"; - #local_address = "d4:be:d9:22:0a:ac"; - #for raw option local port must be the same to remote - local_port = 50000; - remote_port = 50000; - active = "yes"; - preference = "raw"; - -} -); - - NETWORK_INTERFACES : - { - ENB_INTERFACE_NAME_FOR_S1_MME = "eth0"; - ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.111/24"; - - ENB_INTERFACE_NAME_FOR_S1U = "eth0"; - ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.111/24"; - ENB_PORT_FOR_S1U = 2152; # Spec 2152 - }; - - log_config : - { - global_log_level ="info"; - global_log_verbosity ="medium"; - hw_log_level ="info"; - hw_log_verbosity ="medium"; - phy_log_level ="info"; - phy_log_verbosity ="medium"; - mac_log_level ="info"; - mac_log_verbosity ="high"; - rlc_log_level ="info"; - rlc_log_verbosity ="medium"; - pdcp_log_level ="info"; - pdcp_log_verbosity ="medium"; - rrc_log_level ="info"; - rrc_log_verbosity ="medium"; - }; - - } -); diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.sedora.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf similarity index 100% rename from targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.sedora.conf rename to targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.sodera.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.sodera.conf deleted file mode 100644 index 2db6eb799b..0000000000 --- a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.sodera.conf +++ /dev/null @@ -1,192 +0,0 @@ -Active_eNBs = ( "eNB_Eurecom_LTEBox"); -# Asn1_verbosity, choice in: none, info, annoying -Asn1_verbosity = "none"; - -eNBs = -( - { - ////////// Identification parameters: - eNB_ID = 0xe00; - - cell_type = "CELL_MACRO_ENB"; - - eNB_name = "eNB_Eurecom_LTEBox"; - - // Tracking area code, 0x0000 and 0xfffe are reserved values - tracking_area_code = "1"; - - mobile_country_code = "208"; - - mobile_network_code = "92"; - - ////////// Physical parameters: - - component_carriers = ( - { - frame_type = "FDD"; - tdd_config = 3; - tdd_config_s = 0; - prefix_type = "NORMAL"; - eutra_band = 7; - downlink_frequency = 2660000000L; - uplink_frequency_offset = -120000000; - Nid_cell = 0; - N_RB_DL = 25; - Nid_cell_mbsfn = 0; - nb_antennas_tx = 1; - nb_antennas_rx = 1; - tx_gain = 60; - rx_gain = 111; - prach_root = 0; - prach_config_index = 0; - prach_high_speed = "DISABLE"; - prach_zero_correlation = 1; - prach_freq_offset = 2; - pucch_delta_shift = 1; - pucch_nRB_CQI = 1; - pucch_nCS_AN = 0; - pucch_n1_AN = 32; - pdsch_referenceSignalPower = -29; - pdsch_p_b = 0; - pusch_n_SB = 1; - pusch_enable64QAM = "DISABLE"; - pusch_hoppingMode = "interSubFrame"; - pusch_hoppingOffset = 0; - pusch_groupHoppingEnabled = "ENABLE"; - pusch_groupAssignment = 0; - pusch_sequenceHoppingEnabled = "DISABLE"; - pusch_nDMRS1 = 1; - phich_duration = "NORMAL"; - phich_resource = "ONESIXTH"; - srs_enable = "DISABLE"; - /* srs_BandwidthConfig =; - srs_SubframeConfig =; - srs_ackNackST =; - srs_MaxUpPts =;*/ - - pusch_p0_Nominal = -85; - pusch_alpha = "AL1"; - pucch_p0_Nominal = -96; - msg3_delta_Preamble = 6; - pucch_deltaF_Format1 = "deltaF2"; - pucch_deltaF_Format1b = "deltaF3"; - pucch_deltaF_Format2 = "deltaF0"; - pucch_deltaF_Format2a = "deltaF0"; - pucch_deltaF_Format2b = "deltaF0"; - - rach_numberOfRA_Preambles = 64; - rach_preamblesGroupAConfig = "DISABLE"; -/* - rach_sizeOfRA_PreamblesGroupA = ; - rach_messageSizeGroupA = ; - rach_messagePowerOffsetGroupB = ; -*/ - rach_powerRampingStep = 4; - rach_preambleInitialReceivedTargetPower = -100; - rach_preambleTransMax = 10; - rach_raResponseWindowSize = 10; - rach_macContentionResolutionTimer = 48; - rach_maxHARQ_Msg3Tx = 4; - - pcch_default_PagingCycle = 128; - pcch_nB = "oneT"; - bcch_modificationPeriodCoeff = 2; - ue_TimersAndConstants_t300 = 1000; - ue_TimersAndConstants_t301 = 1000; - ue_TimersAndConstants_t310 = 1000; - ue_TimersAndConstants_t311 = 10000; - ue_TimersAndConstants_n310 = 20; - ue_TimersAndConstants_n311 = 1; - - } - ); - - - srb1_parameters : - { - # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500] - timer_poll_retransmit = 80; - - # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200] - timer_reordering = 35; - - # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500] - timer_status_prohibit = 0; - - # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)] - poll_pdu = 4; - - # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)] - poll_byte = 99999; - - # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32] - max_retx_threshold = 4; - } - - # ------- SCTP definitions - SCTP : - { - # Number of streams to use in input/output - SCTP_INSTREAMS = 2; - SCTP_OUTSTREAMS = 2; - }; - - ////////// MME parameters: - mme_ip_address = ( { ipv4 = "192.168.12.26"; - ipv6 = "192:168:30::17"; - active = "yes"; - preference = "ipv4"; - } - ); - - - -rrh_gw_config = ( - { - local_if_name = "eth0"; - remote_address = "169.254.8.28"; - #remote_address = "127.0.0.1"; - #remote_address = "74:d4:35:cc:88:45"; - local_address = "169.254.7.91"; - #local_address = "127.0.0.1"; - #local_address = "d4:be:d9:22:0a:ac"; - #for raw option local port must be the same to remote - local_port = 50000; - remote_port = 50000; - active = "yes"; - preference = "raw"; - -} -); - - - NETWORK_INTERFACES : - { - ENB_INTERFACE_NAME_FOR_S1_MME = "eth4"; - ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.111/24"; - - ENB_INTERFACE_NAME_FOR_S1U = "eth4"; - ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.111/24"; - ENB_PORT_FOR_S1U = 2152; # Spec 2152 - }; - - log_config : - { - global_log_level ="info"; - global_log_verbosity ="medium"; - hw_log_level ="info"; - hw_log_verbosity ="medium"; - phy_log_level ="info"; - phy_log_verbosity ="medium"; - mac_log_level ="info"; - mac_log_verbosity ="high"; - rlc_log_level ="info"; - rlc_log_verbosity ="medium"; - pdcp_log_level ="info"; - pdcp_log_verbosity ="medium"; - rrc_log_level ="info"; - rrc_log_verbosity ="medium"; - }; - - } -); From 87dc41f06794eec1da2ca46c8c57a690100480ea Mon Sep 17 00:00:00 2001 From: Aikaterini Trilyraki Date: Wed, 17 Feb 2016 19:55:03 +0100 Subject: [PATCH 40/55] Delete CMakelists.txt for rrH GW --- cmake_targets/rrh_gw/CMakeLists.txt | 6 ------ 1 file changed, 6 deletions(-) delete mode 100644 cmake_targets/rrh_gw/CMakeLists.txt diff --git a/cmake_targets/rrh_gw/CMakeLists.txt b/cmake_targets/rrh_gw/CMakeLists.txt deleted file mode 100644 index 9ff1437f0c..0000000000 --- a/cmake_targets/rrh_gw/CMakeLists.txt +++ /dev/null @@ -1,6 +0,0 @@ -cmake_minimum_required(VERSION 2.8) -set(ENABLE_VCD_FIFO False ) -set(ENABLE_ITTI False ) -set(RF_BOARD "ETHERNET") -set(PACKAGE_NAME "\"rrh_gw\"") -include(${CMAKE_CURRENT_SOURCE_DIR}/../CMakeLists.txt) From caf14c40d48377e4c2799de7f6f8e2ec5fe9ae21 Mon Sep 17 00:00:00 2001 From: Aikaterini Date: Thu, 18 Feb 2016 17:54:12 +0100 Subject: [PATCH 41/55] settings for 5MHz SoDERA --- targets/ARCH/LMSSDR/USERSPACE/LIB/lms_lib.cpp | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lms_lib.cpp b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms_lib.cpp index e5f69d5577..3ca15c6660 100644 --- a/targets/ARCH/LMSSDR/USERSPACE/LIB/lms_lib.cpp +++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms_lib.cpp @@ -82,7 +82,7 @@ int trx_lms_read(openair0_device *device, openair0_timestamp *ptimestamp, void * uint64_t timestamp; int16_t *dst_ptr = (int16_t*) buff[0]; int ret; - ret = LMS_TRxRead(dst_ptr, nsamps,0,×tamp, 100); + ret = LMS_TRxRead(dst_ptr, nsamps,0,×tamp, 10); *ptimestamp=timestamp; return ret; @@ -843,7 +843,7 @@ int device_init(openair0_device *device, openair0_config_t *openair0_cfg){ openair0_cfg[0].tx_sample_advance = 70; openair0_cfg[0].tx_bw = 28e6; openair0_cfg[0].rx_bw = 5.0e6; - openair0_cfg[0].tx_scheduling_advance = 5*openair0_cfg[0].samples_per_packet; + openair0_cfg[0].tx_scheduling_advance = 8*openair0_cfg[0].samples_per_packet; break; case 1920000: openair0_cfg[0].samples_per_packet = 256; From f7fde92665c1cbc35866e5e654519f7f82cb3eca Mon Sep 17 00:00:00 2001 From: Aikaterini Date: Thu, 18 Feb 2016 17:55:05 +0100 Subject: [PATCH 42/55] config files update --- .../CONF/enb.band7.tm1.50PRB.lmssdr.conf | 10 +++++----- .../GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf | 12 ++++++------ .../CONF/enb.band7.tm1.usrpb210.epc.remote.conf | 14 +++++++------- 3 files changed, 18 insertions(+), 18 deletions(-) diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.lmssdr.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.lmssdr.conf index 8a5f33af4b..e001bd12e9 100644 --- a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.lmssdr.conf +++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.lmssdr.conf @@ -132,7 +132,7 @@ eNBs = }; ////////// MME parameters: - mme_ip_address = ( { ipv4 = "192.168.12.11"; + mme_ip_address = ( { ipv4 = "192.168.12.171"; ipv6 = "192:168:30::17"; active = "yes"; preference = "ipv4"; @@ -141,11 +141,11 @@ eNBs = NETWORK_INTERFACES : { - ENB_INTERFACE_NAME_FOR_S1_MME = "eth0"; - ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.215/24"; + ENB_INTERFACE_NAME_FOR_S1_MME = "eth4"; + ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.242/24"; - ENB_INTERFACE_NAME_FOR_S1U = "eth0"; - ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.215/24"; + ENB_INTERFACE_NAME_FOR_S1U = "eth4"; + ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.242/24"; ENB_PORT_FOR_S1U = 2152; # Spec 2152 }; diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf index 70fcc2e3f4..47e2179d18 100644 --- a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf +++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf @@ -17,7 +17,7 @@ eNBs = mobile_country_code = "208"; - mobile_network_code = "93"; + mobile_network_code = "92"; ////////// Physical parameters: @@ -132,7 +132,7 @@ eNBs = }; ////////// MME parameters: - mme_ip_address = ( { ipv4 = "192.168.12.11"; + mme_ip_address = ( { ipv4 = "192.168.12.170"; ipv6 = "192:168:30::17"; active = "yes"; preference = "ipv4"; @@ -141,11 +141,11 @@ eNBs = NETWORK_INTERFACES : { - ENB_INTERFACE_NAME_FOR_S1_MME = "eth0"; - ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.215/24"; + ENB_INTERFACE_NAME_FOR_S1_MME = "eth4"; + ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.242/24"; - ENB_INTERFACE_NAME_FOR_S1U = "eth0"; - ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.215/24"; + ENB_INTERFACE_NAME_FOR_S1U = "eth4"; + ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.242/24"; ENB_PORT_FOR_S1U = 2152; # Spec 2152 }; diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf index 375a4a90ca..83b08cb4e0 100644 --- a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf +++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf @@ -16,7 +16,7 @@ eNBs = tracking_area_code = "1"; mobile_country_code = "208"; - mobile_network_code = "95"; + mobile_network_code = "92"; ////////// Physical parameters: @@ -35,7 +35,7 @@ eNBs = nb_antennas_tx = 1; nb_antennas_rx = 1; tx_gain = 90; - rx_gain = 132; + rx_gain = 125; prach_root = 0; prach_config_index = 0; prach_high_speed = "DISABLE"; @@ -130,18 +130,18 @@ eNBs = }; ////////// MME parameters: - mme_ip_address = ( {ipv4 = "192.168.12.17"; + mme_ip_address = ( {ipv4 = "192.168.12.170"; ipv6="192:168:30::17"; active="yes"; preference="ipv4";}); NETWORK_INTERFACES : { - ENB_INTERFACE_NAME_FOR_S1_MME = "eth0"; - ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.213/24"; + ENB_INTERFACE_NAME_FOR_S1_MME = "eth4"; + ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.242/24"; - ENB_INTERFACE_NAME_FOR_S1U = "eth0"; - ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.213/24"; + ENB_INTERFACE_NAME_FOR_S1U = "eth4"; + ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.242/24"; ENB_PORT_FOR_S1U = 2152; # Spec 2152 }; From 78913e263e68d38566c2030e4ca33e903500bbf7 Mon Sep 17 00:00:00 2001 From: Navid Nikaein Date: Fri, 19 Feb 2016 00:43:02 +0100 Subject: [PATCH 43/55] change rrh_gw_config naming in enb config file --- cmake_targets/tools/build_helper | 18 ++++++++++++++++++ openair2/ENB_APP/enb_config.c | 2 +- .../CONF/enb.band7.tm1.50PRB.rrh.lmssdr.conf | 2 +- .../CONF/enb.band7.tm1.50PRB.rrh.usrpb210.conf | 2 +- .../CONF/enb.band7.tm1.rrh.lmssdr.conf | 2 +- .../CONF/enb.band7.tm1.rrh.usrpb210.conf | 2 +- 6 files changed, 23 insertions(+), 5 deletions(-) diff --git a/cmake_targets/tools/build_helper b/cmake_targets/tools/build_helper index d29dbffe13..c8adf45257 100755 --- a/cmake_targets/tools/build_helper +++ b/cmake_targets/tools/build_helper @@ -380,3 +380,21 @@ done } +# get from http://www.linuxjournal.com/content/validating-ip-address-bash-script +validate_ip() { + +local ip=$1 +local stat=1 + +if [[ $ip =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ ]]; then + OIFS=$IFS + IFS='.' + ip=($ip) + IFS=$OIFS + [[ ${ip[0]} -le 255 && ${ip[1]} -le 255 \ + && ${ip[2]} -le 255 && ${ip[3]} -le 255 ]] + stat=$? +fi + +return $stat +} \ No newline at end of file diff --git a/openair2/ENB_APP/enb_config.c b/openair2/ENB_APP/enb_config.c index 0f6e6b3706..4c532285f2 100755 --- a/openair2/ENB_APP/enb_config.c +++ b/openair2/ENB_APP/enb_config.c @@ -176,7 +176,7 @@ #define ENB_CONFIG_STRING_RRH_GW_REMOTE_ADDRESS "remote_address" #define ENB_CONFIG_STRING_RRH_GW_LOCAL_PORT "local_port" #define ENB_CONFIG_STRING_RRH_GW_REMOTE_PORT "remote_port" -#define ENB_CONFIG_STRING_RRH_GW_ACTIVE "active" +#define ENB_CONFIG_STRING_RRH_GW_ACTIVE "rrh_gw_active" #define ENB_CONFIG_STRING_RRH_GW_TRANSPORT_PREFERENCE "tr_preference" #define ENB_CONFIG_STRING_RRH_GW_RF_TARGET_PREFERENCE "rf_preference" #define ENB_CONFIG_STRING_RRH_GW_IQ_TXSHIFT "iq_txshift" diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.rrh.lmssdr.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.rrh.lmssdr.conf index 604226c31a..4cd761645b 100644 --- a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.rrh.lmssdr.conf +++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.rrh.lmssdr.conf @@ -149,7 +149,7 @@ rrh_gw_config = ( local_address = "d4:be:d9:22:0a:ac"; local_port = 50000; #for raw option local port must be the same to remote remote_port = 50000; - active = "yes"; + rrh_gw_active = "yes"; tr_preference = "raw"; rf_preference = "lmssdr"; iq_txshift = 0; diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.rrh.usrpb210.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.rrh.usrpb210.conf index c42e1b7864..604f5567ef 100644 --- a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.rrh.usrpb210.conf +++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.rrh.usrpb210.conf @@ -147,7 +147,7 @@ rrh_gw_config = ( local_address = "98:90:96:df:66:07"; local_port = 50000; #for raw option local port must be the same to remote remote_port = 50000; - active = "yes"; + rrh_gw_active = "yes"; tr_preference = "raw"; rf_preference = "usrp_b200"; iq_txshift = 5; diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.lmssdr.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.lmssdr.conf index 93afe062e9..9b052bf7ba 100644 --- a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.lmssdr.conf +++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.lmssdr.conf @@ -149,7 +149,7 @@ rrh_gw_config = ( local_address = "d4:be:d9:22:0a:ac"; local_port = 50000; #for raw option local port must be the same to remote remote_port = 50000; - active = "yes"; + rrh_gw_active = "yes"; tr_preference = "raw"; rf_preference = "lmssdr"; iq_txshift = 0; diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf index 6b74698849..33db53740c 100644 --- a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf +++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf @@ -149,7 +149,7 @@ rrh_gw_config = ( local_address = "98:90:96:df:66:07"; local_port = 50000; #for raw option local port must be the same to remote remote_port = 50000; - active = "yes"; + rrh_gw_active = "yes"; tr_preference = "raw"; rf_preference = "usrp_b200"; iq_txshift = 5; From 8984944444e51f0b6c267233d718c4514724bcee Mon Sep 17 00:00:00 2001 From: Florian Kaltenberger Date: Fri, 19 Feb 2016 11:47:25 +0100 Subject: [PATCH 44/55] fixing a bug in cmult_vv, removing unused code. --- openair1/PHY/TOOLS/cmult_mm.c | 200 ------------------ openair1/PHY/TOOLS/cmult_vv.c | 5 +- openair1/PHY/TOOLS/cmult_vvh.c | 366 --------------------------------- openair1/PHY/TOOLS/defs.h | 208 +++---------------- openair1/PHY/TOOLS/time_meas.h | 4 + 5 files changed, 33 insertions(+), 750 deletions(-) delete mode 100644 openair1/PHY/TOOLS/cmult_mm.c delete mode 100644 openair1/PHY/TOOLS/cmult_vvh.c diff --git a/openair1/PHY/TOOLS/cmult_mm.c b/openair1/PHY/TOOLS/cmult_mm.c deleted file mode 100644 index 328958af29..0000000000 --- a/openair1/PHY/TOOLS/cmult_mm.c +++ /dev/null @@ -1,200 +0,0 @@ -/******************************************************************************* - OpenAirInterface - Copyright(c) 1999 - 2014 Eurecom - - OpenAirInterface is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - - OpenAirInterface is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with OpenAirInterface.The full GNU General Public License is - included in this distribution in the file called "COPYING". If not, - see . - - Contact Information - OpenAirInterface Admin: openair_admin@eurecom.fr - OpenAirInterface Tech : openair_tech@eurecom.fr - OpenAirInterface Dev : openair4g-devel@lists.eurecom.fr - - Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE - - *******************************************************************************/ -#include "defs.h" - -int mult_cpx_matrix_h(short *x1[2][2], - short *x2[2][2], - short *y[2][2], - unsigned int N, - unsigned short output_shift, - short hermitian) -{ - - if (hermitian) { - // this computes x1^H*x2 and stores it in y - mult_cpx_vector_h(x2[0][0],x1[0][0],y[0][0],N,output_shift,1); - mult_cpx_vector_h(x2[0][1],x1[0][1],y[0][0],N,output_shift,1); - mult_cpx_vector_h(x2[0][0],x1[1][0],y[1][0],N,output_shift,1); - mult_cpx_vector_h(x2[0][1],x1[1][1],y[1][0],N,output_shift,1); - mult_cpx_vector_h(x2[1][0],x1[0][0],y[0][1],N,output_shift,1); - mult_cpx_vector_h(x2[1][1],x1[0][1],y[0][1],N,output_shift,1); - mult_cpx_vector_h(x2[1][0],x1[1][0],y[1][1],N,output_shift,1); - mult_cpx_vector_h(x2[1][1],x1[1][1],y[1][1],N,output_shift,1); - } else { - // this computes x1*x2^H and stores it in y - mult_cpx_vector_h(x1[0][0],x2[0][0],y[0][0],N,output_shift,1); - mult_cpx_vector_h(x1[0][1],x2[0][1],y[0][0],N,output_shift,1); - mult_cpx_vector_h(x1[0][0],x2[1][0],y[0][1],N,output_shift,1); - mult_cpx_vector_h(x1[0][1],x2[1][1],y[0][1],N,output_shift,1); - mult_cpx_vector_h(x1[1][0],x2[0][0],y[1][0],N,output_shift,1); - mult_cpx_vector_h(x1[1][1],x2[0][1],y[1][0],N,output_shift,1); - mult_cpx_vector_h(x1[1][0],x2[1][0],y[1][1],N,output_shift,1); - mult_cpx_vector_h(x1[1][1],x2[1][1],y[1][1],N,output_shift,1); - } -} - -int mult_cpx_matrix_vector(int *x1[2][2], - int *x2[2], - int *y[2], - unsigned int N, - unsigned short output_shift) -{ - - Zero_Buffer(y[0],N*8); - Zero_Buffer(y[1],N*8); - - // this computes x1*x2 and stores it in y (32 bit) - mult_cpx_vector_add32((short*)x2[0],(short*)x1[0][0],(short*)y[0],N); - mult_cpx_vector_add32((short*)x2[1],(short*)x1[0][1],(short*)y[0],N); - mult_cpx_vector_add32((short*)x2[0],(short*)x1[1][0],(short*)y[1],N); - mult_cpx_vector_add32((short*)x2[1],(short*)x1[1][1],(short*)y[1],N); - - // shift and pack - shift_and_pack((short*)y[0],N,output_shift); - shift_and_pack((short*)y[1],N,output_shift); - -} - -#ifdef MAIN_MM -#include -#include -main () -{ - short x1_00[256] __attribute__((aligned(16))); - short x1_10[256] __attribute__((aligned(16))); - short x1_01[256] __attribute__((aligned(16))); - short x1_11[256] __attribute__((aligned(16))); - short x2_0[256] __attribute__((aligned(16))); - short x2_1[256] __attribute__((aligned(16))); - short y_0[256] __attribute__((aligned(16))); - short y_1[256] __attribute__((aligned(16))); - - int *x1[2][2]; - int *x2[2]; - int *y[2]; - int i,m,n; - - x1[0][0] = (int*)x1_00; - x1[0][1] = (int*)x1_01; - x1[1][0] = (int*)x1_10; - x1[1][1] = (int*)x1_11; - x2[0] = (int*)x2_0; - x2[1] = (int*)x2_1; - y[0] = (int*)y_0; - y[1] = (int*)y_1; - - for(m=0; m<2; m++) { - for(n=0; n<2; n++) { - for(i=0; i<256; i+=4) { - ((short*)x1[m][n])[i] = ((short) rand())/4; - ((short*)x1[m][n])[i+1] = ((short) rand())/4; - ((short*)x1[m][n])[i+2] = -((short*)x1[m][n])[i+1]; - ((short*)x1[m][n])[i+3] = ((short*)x1[m][n])[i]; - } - } - - for(i=0; i<256; i+=4) { - ((short*)x2[m])[i] = ((short) rand())/4; - ((short*)x2[m])[i+1] = ((short) rand())/4; - ((short*)x2[m])[i+2] = ((short*)x2[m])[i]; - ((short*)x2[m])[i+3] = ((short*)x2[m])[i+1]; - } - - Zero_Buffer(y[m],512); - } - - /* - input[0] = 100; - input[1] = 200; - input[2] = -200; - input[3] = 100; - input[4] = 1000; - input[5] = 2000; - input[6] = -2000; - input[7] = 1000; - input[8] = 100; - input[9] = 200; - input[10] = -200; - input[11] = 100; - input[12] = 1000; - input[13] = 2000; - input[14] = -2000; - input[15] = 1000; - - input2[0] = 2; - input2[1] = 1; - input2[2] = 2; - input2[3] = 1; - input2[4] = 20; - input2[5] = 10; - input2[6] = 20; - input2[7] = 10; - input2[8] = 2; - input2[9] = 1; - input2[10] = 2; - input2[11] = 1; - input2[12] = 2000; - input2[13] = 1000; - input2[14] = 2000; - input2[15] = 1000; - - x1[0][0] = (int*)input; - x1[0][1] = (int*)input; - x1[1][0] = (int*)input; - x1[1][1] = (int*)input; - - x2[0] = (int*)input2; - x2[1] = (int*)input2; - - y[0] = (int*)output; - y[1] = (int*)output2; - */ - - mult_cpx_matrix_vector(x1,x2,y,64,15); - - //mult_cpx_vector_add32(x2[0],x1[0][0],y[0],64); - - for (i=0; i<128; i+=2) - printf("i=%d, x1 = [%d+1i*%d %d+1i*%d; %d+1i*%d %d+1i*%d]; x2 = [%d+1i*%d; %d+1i*%d]; y = [%d+1i*%d; %d+1i*%d]; y_m= round(x1*x2./pow2(15)); y-y_m \n", - i, - ((short*)x1[0][0])[2*i], ((short*)x1[0][0])[2*i+2], - ((short*)x1[0][1])[2*i], ((short*)x1[0][1])[2*i+2], - ((short*)x1[1][0])[2*i], ((short*)x1[1][0])[2*i+2], - ((short*)x1[1][1])[2*i], ((short*)x1[1][1])[2*i+2], - ((short*)x2[0])[2*i], ((short*)x2[0])[2*i+1], - ((short*)x2[1])[2*i], ((short*)x2[1])[2*i+1], - ((short*)y[0])[2*i], ((short*)y[0])[2*i+1], - ((short*)y[1])[2*i], ((short*)y[1])[2*i+1]); - - //((int*)y[0])[i], ((int*)y[0])[i+1], - //((int*)y[1])[i], ((int*)y[1])[i+1]); - -} - -#endif diff --git a/openair1/PHY/TOOLS/cmult_vv.c b/openair1/PHY/TOOLS/cmult_vv.c index d7b7275508..f970d33224 100755 --- a/openair1/PHY/TOOLS/cmult_vv.c +++ b/openair1/PHY/TOOLS/cmult_vv.c @@ -50,7 +50,7 @@ int mult_cpx_conj_vector(int16_t *x1, uint32_t N, int output_shift) { - // Multiply elementwise two complex vectors of N elements with repeated formatted output + // Multiply elementwise the complex conjugate of x1 with x2. // x1 - input 1 in the format |Re0 Im0 Re1 Im1|,......,|Re(N-2) Im(N-2) Re(N-1) Im(N-1)| // We assume x1 with a dinamic of 15 bit maximum // @@ -90,7 +90,7 @@ int mult_cpx_conj_vector(int16_t *x1, tmp_im = _mm_shufflelo_epi16(*x1_128,_MM_SHUFFLE(2,3,0,1)); tmp_im = _mm_shufflehi_epi16(tmp_im,_MM_SHUFFLE(2,3,0,1)); tmp_im = _mm_sign_epi16(tmp_im,*(__m128i*)&conjug[0]); - tmp_im = _mm_madd_epi16(tmp_im,*x1_128); + tmp_im = _mm_madd_epi16(tmp_im,*x2_128); tmp_re = _mm_srai_epi32(tmp_re,output_shift); tmp_im = _mm_srai_epi32(tmp_im,output_shift); tmpy0 = _mm_unpacklo_epi32(tmp_re,tmp_im); @@ -130,3 +130,4 @@ int mult_cpx_conj_vector(int16_t *x1, return(0); } + diff --git a/openair1/PHY/TOOLS/cmult_vvh.c b/openair1/PHY/TOOLS/cmult_vvh.c deleted file mode 100644 index 64cf163d09..0000000000 --- a/openair1/PHY/TOOLS/cmult_vvh.c +++ /dev/null @@ -1,366 +0,0 @@ -/******************************************************************************* - OpenAirInterface - Copyright(c) 1999 - 2014 Eurecom - - OpenAirInterface is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - - OpenAirInterface is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with OpenAirInterface.The full GNU General Public License is - included in this distribution in the file called "COPYING". If not, - see . - - Contact Information - OpenAirInterface Admin: openair_admin@eurecom.fr - OpenAirInterface Tech : openair_tech@eurecom.fr - OpenAirInterface Dev : openair4g-devel@lists.eurecom.fr - - Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE - - *******************************************************************************/ -#include "defs.h" - -static __m128i shift __attribute__ ((aligned(16))); - - -int mult_cpx_vector_h(short *x1, - short *x2, - short *y, - unsigned int N, - unsigned short output_shift, - short sign) -{ - // Multiply elementwise the complex vector x1 with the complex conjugate of the complex vecotr x2 of N elements and adds it to the vector y. - // x1 - input 1 in the format |Re0 Im0 Re0 Im0|,......,|Re(N-1) Im(N-1) Re(N-1) Im(N-1)| - // We assume x1 with a dinamic of 15 bit maximum - // - // x2 - input 2 in the format |Re0 Im0 Re0 Im0|,......,|Re(N-1) Im(N-1) Re(N-1) Im(N-1)| - // We assume x2 with a dinamic of 14 bit maximum - // - // y - output in the format |Re0 Im0 Re0 Im0|,......,|Re(N-1) Im(N-1) Re(N-1) Im(N-1)| - // - // N - the size f the vectors (this function does N cpx mpy. WARNING: N>=4; - // - // log2_amp - increase the output amplitude by a factor 2^log2_amp (default is 0) - // WARNING: log2_amp>0 can cause overflow!! - // sign - +1..add, -1..substract - - unsigned int i; // loop counter - - register __m128i m0,m1,m2; - - short *temps; - int *tempd; - - __m128i *x1_128; - __m128i *x2_128; - __m128i *y_128; - __m128i mask; - - __m128i temp; - - shift = _mm_cvtsi32_si128(output_shift); - x1_128 = (__m128i *)&x1[0]; - x2_128 = (__m128i *)&x2[0]; - y_128 = (__m128i *)&y[0]; - - if (sign == -1) - mask = (__m128i) _mm_set_epi16 (-1,1,-1,-1,-1,1,-1,-1); - else - mask = (__m128i) _mm_set_epi16 (1,-1,1,1,1,-1,1,1); - - // we compute 2*4 cpx multiply for each loop - for(i=0; i<(N>>3); i++) { - - // printf("i=%d\n",i); - - // unroll 1 - // temps = (short *)x1_128; - // printf("x1 : %d,%d,%d,%d,%d,%d,%d,%d\n",temps[0],temps[1],temps[2],temps[3],temps[4],temps[5],temps[6],temps[7]); - m1 = x1_128[0]; - m2 = x2_128[0]; - - // temps = (short *)&x2_128[0]; - // printf("x2 : %x,%x,%x,%x,%x,%x,%x,%x\n",temps[0],temps[1],temps[2],temps[3],temps[4],temps[5],temps[6],temps[7]); - - // bring x2 in conjugate form - // the first two instructions might be replaced with a single one in SSE3 - m2 = _mm_shufflelo_epi16(m2,_MM_SHUFFLE(0,1,3,2)); - m2 = _mm_shufflehi_epi16(m2,_MM_SHUFFLE(0,1,3,2)); - m2 = _mm_mullo_epi16(m2, mask); - - // temp = m2; - // temps = (short *)&temp; - // printf("x2 conj : %x,%x,%x,%x,%x,%x,%x,%x\n",temps[0],temps[1],temps[2],temps[3],temps[4],temps[5],temps[6],temps[7]); - - m0 = _mm_madd_epi16(m1,m2); //pmaddwd_r2r(mm1,mm0); // 1- compute x1[0]*x2[0] - - // temp = m0; - - // tempd = &temp; - // printf("m0 : %d,%d,%d,%d\n",tempd[0],tempd[1],tempd[2],tempd[3]); - - m0 = _mm_sra_epi32(m0,shift); // 1- shift right by shift in order to compensate for the input amplitude - - // temp = m0; - - // tempd = (int *)&temp; - // printf("m0 : %d,%d,%d,%d\n",tempd[0],tempd[1],tempd[2],tempd[3]); - - m0 = _mm_packs_epi32(m0,m0); // 1- pack in a 128 bit register [re im re im] - m0 = _mm_unpacklo_epi32(m0,m0); // 1- pack in a 128 bit register [re im re im] - - y_128[0] = _mm_add_epi16(m0,y_128[0]); - - // temps = (short *)&y_128[0]; - // printf("y0 : %d,%d,%d,%d,%d,%d,%d,%d\n",temps[0],temps[1],temps[2],temps[3],temps[4],temps[5],temps[6],temps[7]); - - // unroll 2 - m1 = x1_128[1]; - m2 = x2_128[1]; - - m2 = _mm_shufflelo_epi16(m2,_MM_SHUFFLE(0,1,3,2)); - m2 = _mm_shufflehi_epi16(m2,_MM_SHUFFLE(0,1,3,2)); - m2 = _mm_mullo_epi16(m2, mask); - - m0 = _mm_madd_epi16(m1,m2); //pmaddwd_r2r(mm1,mm0); // 1- compute x1[0]*x2[0] - - m0 = _mm_sra_epi32(m0,shift); // 1- shift right by shift in order to compensate for the input amplitude - - m0 = _mm_packs_epi32(m0,m0); // 1- pack in a 128 bit register [re im re im] - m0 = _mm_unpacklo_epi32(m0,m0); // 1- pack in a 128 bit register [re im re im] - - y_128[1] = _mm_add_epi16(m0,y_128[1]); - - // unroll 3 - m1 = x1_128[2]; - m2 = x2_128[2]; - - m2 = _mm_shufflelo_epi16(m2,_MM_SHUFFLE(0,1,3,2)); - m2 = _mm_shufflehi_epi16(m2,_MM_SHUFFLE(0,1,3,2)); - m2 = _mm_mullo_epi16(m2, mask); - - m0 = _mm_madd_epi16(m1,m2); //pmaddwd_r2r(mm1,mm0); // 1- compute x1[0]*x2[0] - - m0 = _mm_sra_epi32(m0,shift); // 1- shift right by shift in order to compensate for the input amplitude - - m0 = _mm_packs_epi32(m0,m0); // 1- pack in a 128 bit register [re im re im] - m0 = _mm_unpacklo_epi32(m0,m0); // 1- pack in a 128 bit register [re im re im] - - y_128[2] = _mm_add_epi16(m0,y_128[2]); - - - // unroll 4 - m1 = x1_128[3]; - m2 = x2_128[3]; - - m2 = _mm_shufflelo_epi16(m2,_MM_SHUFFLE(0,1,3,2)); - m2 = _mm_shufflehi_epi16(m2,_MM_SHUFFLE(0,1,3,2)); - m2 = _mm_mullo_epi16(m2, mask); - - m0 = _mm_madd_epi16(m1,m2); //pmaddwd_r2r(mm1,mm0); // 1- compute x1[0]*x2[0] - - m0 = _mm_sra_epi32(m0,shift); // 1- shift right by shift in order to compensate for the input amplitude - - m0 = _mm_packs_epi32(m0,m0); // 1- pack in a 128 bit register [re im re im] - m0 = _mm_unpacklo_epi32(m0,m0); // 1- pack in a 128 bit register [re im re im] - - y_128[3] = _mm_add_epi16(m0,y_128[3]); - - x1_128+=4; - x2_128+=4; - y_128 +=4; - // printf("x1_128 = %p, x2_128 =%p, y_128=%p\n",x1_128,x2_128,y_128); - - } - - - _mm_empty(); - _m_empty(); - - return(0); -} - - -int mult_cpx_vector_h_add32(short *x1, - short *x2, - short *y, - unsigned int N, - short sign) -{ - // Multiply elementwise the complex vector x1 with the complex conjugate of the complex vecotr x2 of N elements and adds it to the vector y. - // x1 - input 1 in 16bit format |Re0 Im0 Re0 Im0|,......,|Re(N-1) Im(N-1) Re(N-1) Im(N-1)| - // We assume x1 with a dinamic of 15 bit maximum - // - // x2 - input 2 in 16bit format |Re0 Im0 Re0 Im0|,......,|Re(N-1) Im(N-1) Re(N-1) Im(N-1)| - // We assume x2 with a dinamic of 14 bit maximum - // - // y - output in 32bit format |Re0 Im0|,......,|Re(N-1) Im(N-1)| - // - // N - the size f the vectors (this function does N cpx mpy. WARNING: N>=4; - // - // sign - +1..add, -1..substract - - unsigned int i; // loop counter - - register __m128i m0,m1,m2; - - short *temps; - int *tempd; - - __m128i *x1_128; - __m128i *x2_128; - __m128i *y_128; - __m128i mask; - - __m128i temp; - - x1_128 = (__m128i *)&x1[0]; - x2_128 = (__m128i *)&x2[0]; - y_128 = (__m128i *)&y[0]; - - if (sign == -1) - mask = (__m128i) _mm_set_epi16 (-1,1,-1,-1,-1,1,-1,-1); - else - mask = (__m128i) _mm_set_epi16 (1,-1,1,1,1,-1,1,1); - - // we compute 2*4 cpx multiply for each loop - for(i=0; i<(N>>3); i++) { - - m1 = x1_128[0]; - m2 = x2_128[0]; - - // bring x2 in conjugate form - // the first two instructions might be replaced with a single one in SSE3 - m2 = _mm_shufflelo_epi16(m2,_MM_SHUFFLE(0,1,3,2)); - m2 = _mm_shufflehi_epi16(m2,_MM_SHUFFLE(0,1,3,2)); - m2 = _mm_mullo_epi16(m2, mask); - - m0 = _mm_madd_epi16(m1,m2); // 1- compute x1[0]*x2[0], result is 32bit - - y_128[0] = _mm_add_epi32(m0,y_128[0]); - - // unroll 2 - m1 = x1_128[1]; - m2 = x2_128[1]; - - m2 = _mm_shufflelo_epi16(m2,_MM_SHUFFLE(0,1,3,2)); - m2 = _mm_shufflehi_epi16(m2,_MM_SHUFFLE(0,1,3,2)); - m2 = _mm_mullo_epi16(m2, mask); - - m0 = _mm_madd_epi16(m1,m2); - - y_128[1] = _mm_add_epi32(m0,y_128[1]); - - // unroll 3 - m1 = x1_128[2]; - m2 = x2_128[2]; - - m2 = _mm_shufflelo_epi16(m2,_MM_SHUFFLE(0,1,3,2)); - m2 = _mm_shufflehi_epi16(m2,_MM_SHUFFLE(0,1,3,2)); - m2 = _mm_mullo_epi16(m2, mask); - - m0 = _mm_madd_epi16(m1,m2); - - y_128[2] = _mm_add_epi32(m0,y_128[2]); - - - // unroll 4 - m1 = x1_128[3]; - m2 = x2_128[3]; - - m2 = _mm_shufflelo_epi16(m2,_MM_SHUFFLE(0,1,3,2)); - m2 = _mm_shufflehi_epi16(m2,_MM_SHUFFLE(0,1,3,2)); - m2 = _mm_mullo_epi16(m2, mask); - - m0 = _mm_madd_epi16(m1,m2); - - y_128[3] = _mm_add_epi32(m0,y_128[3]); - - x1_128+=4; - x2_128+=4; - y_128 +=4; - - } - - - _mm_empty(); - _m_empty(); - - return(0); -} - -#ifdef MAIN -#define L 16 - -main () -{ - - short input[256] __attribute__((aligned(16))); - short input2[256] __attribute__((aligned(16))); - short output[256] __attribute__((aligned(16))); - - int i; - - Zero_Buffer(output,256*2); - - for (i=0; i<16; i+=2) - printf("output[%d] = %d + %d i\n",i,output[i],output[i+1]); - - input[0] = 100; - input[1] = 200; - input[2] = 100; - input[3] = 200; - input[4] = 1234; - input[5] = -1234; - input[6] = 1234; - input[7] = -1234; - input[8] = 100; - input[9] = 200; - input[10] = 100; - input[11] = 200; - input[12] = 1000; - input[13] = 2000; - input[14] = 1000; - input[15] = 2000; - - input2[0] = 1; - input2[1] = 2; - input2[2] = 1; - input2[3] = 2; - input2[4] = 10; - input2[5] = 20; - input2[6] = 10; - input2[7] = 20; - input2[8] = 1; - input2[9] = 2; - input2[10] = 1; - input2[11] = 2; - input2[12] = 1000; - input2[13] = 2000; - input2[14] = 1000; - input2[15] = 2000; - - - mult_cpx_vector_h(input2,input2,output,8,0,1); - - for (i=0; i<16; i+=2) - printf("output[%d] = %d + %d i\n",i,output[i],output[i+1]); - - Zero_Buffer(output,256*2); - mult_cpx_vector_h(input2,input2,output,8,0,-1); - - for (i=0; i<16; i+=2) - printf("output[%d] = %d + %d i\n",i,output[i],output[i+1]); - -} - -#endif //MAIN diff --git a/openair1/PHY/TOOLS/defs.h b/openair1/PHY/TOOLS/defs.h index 6960fcda4c..963c1384b7 100644 --- a/openair1/PHY/TOOLS/defs.h +++ b/openair1/PHY/TOOLS/defs.h @@ -64,6 +64,8 @@ struct complex32 { int32_t i; }; +//cmult_sv.h + /*!\fn void multadd_real_vector_complex_scalar(int16_t *x,int16_t *alpha,int16_t *y,uint32_t N) This function performs componentwise multiplication and accumulation of a complex scalar and a real vector. @param x Vector input (Q1.15) @@ -95,192 +97,14 @@ void multadd_complex_vector_real_scalar(int16_t *x, uint8_t zero_flag, uint32_t N); - -/*!\fn int32_t mult_cpx_vector(int16_t *x1,int16_t *x2,int16_t *y,uint32_t N,int32_t output_shift) -This function performs optimized componentwise multiplication of two Q1.15 vectors in repeated format. - -@param x1 Input 1 in the format |Re0 Im0 Re0 Im0|,......,|Re(N-1) Im(N-1) Re(N-1) Im(N-1)| -@param x2 Input 2 in the format |Re0 -Im0 Im0 Re0|,......,|Re(N-1) -Im(N-1) Im(N-1) Re(N-1)| -@param y Output in the format |Re0 Im0 Re0 Im0|,......,|Re(N-1) Im(N-1) Re(N-1) Im(N-1)| -@param N Length of Vector WARNING: N must be a multiple of 8 (4x loop unrolling and two complex multiplies per cycle) -@param output_shift Number of bits to shift output down to Q1.15 (should be 15 for Q1.15 inputs) WARNING: log2_amp>0 can cause overflow!! - -The function implemented is : \f$\mathbf{y} = \mathbf{x_1}\odot\mathbf{x_2}\f$ -*/ -int32_t mult_cpx_vector(int16_t *x1, - int16_t *x2, - int16_t *y, - uint32_t N, - int32_t output_shift); - -/*!\fn int32_t mult_cpx_vector_norep(int16_t *x1,int16_t *x2,int16_t *y,uint32_t N,int32_t output_shift) -This function performs optimized componentwise multiplication of two Q1.15 vectors with normal formatted output. - -@param x1 Input 1 in the format |Re0 Im0 Re0 Im0|,......,|Re(N-1) Im(N-1) Re(N-1) Im(N-1)| -@param x2 Input 2 in the format |Re0 -Im0 Im0 Re0|,......,|Re(N-1) -Im(N-1) Im(N-1) Re(N-1)| -@param y Output in the format |Re0 Im0 Re1 Im1|,......,|Re(N-2) Im(N-2) Re(N-1) Im(N-1)| -@param N Length of Vector WARNING: N must be a multiple of 8 (4x loop unrolling and two complex multiplies per cycle) -@param output_shift Number of bits to shift output down to Q1.15 (should be 15 for Q1.15 inputs) WARNING: log2_amp>0 can cause overflow!! - -The function implemented is : \f$\mathbf{y} = \mathbf{x_1}\odot\mathbf{x_2}\f$ -*/ -int32_t mult_cpx_vector_norep(int16_t *x1, - int16_t *x2, - int16_t *y, - uint32_t N, - int32_t output_shift); - - -/*!\fn int32_t mult_cpx_vector_norep2(int16_t *x1,int16_t *x2,int16_t *y,uint32_t N,int32_t output_shift) -This function performs optimized componentwise multiplication of two Q1.15 vectors with normal formatted output. - -@param x1 Input 1 in the format |Re0 Im0 Re0 Im0|,......,|Re(N-1) Im(N-1) Re(N-1) Im(N-1)| -@param x2 Input 2 in the format |Re0 -Im0 Im0 Re0|,......,|Re(N-1) -Im(N-1) Im(N-1) Re(N-1)| -@param y Output in the format |Re0 Im0 Re1 Im1|,......,|Re(N-2) Im(N-2) Re(N-1) Im(N-1)| -@param N Length of Vector WARNING: N must be a multiple of 8 (no unrolling and two complex multiplies per cycle) -@param output_shift Number of bits to shift output down to Q1.15 (should be 15 for Q1.15 inputs) WARNING: log2_amp>0 can cause overflow!! - -The function implemented is : \f$\mathbf{y} = \mathbf{x_1}\odot\mathbf{x_2}\f$ -*/ -int32_t mult_cpx_vector_norep2(int16_t *x1, - int16_t *x2, - int16_t *y, - uint32_t N, - int32_t output_shift); - -int32_t mult_cpx_vector_norep_conj(int16_t *x1, - int16_t *x2, - int16_t *y, - uint32_t N, - int32_t output_shift); - -int32_t mult_cpx_vector_norep_conj2(int16_t *x1, - int16_t *x2, - int16_t *y, - uint32_t N, - int32_t output_shift); - -/*!\fn int32_t mult_cpx_vector2(int16_t *x1,int16_t *x2,int16_t *y,uint32_t N,int32_t output_shift) -This function performs optimized componentwise multiplication of two Q1.15 vectors. - -@param x1 Input 1 in the format |Re0 Im0 Re0 Im0|,......,|Re(N-1) Im(N-1) Re(N-1) Im(N-1)| -@param x2 Input 2 in the format |Re0 -Im0 Im0 Re0|,......,|Re(N-1) -Im(N-1) Im(N-1) Re(N-1)| -@param y Output in the format |Re0 Im0 Re0 Im0|,......,|Re(N-1) Im(N-1) Re(N-1) Im(N-1)| -@param N Length of Vector WARNING: N must be a multiple of 2 (2 complex multiplies per cycle) -@param output_shift Number of bits to shift output down to Q1.15 (should be 15 for Q1.15 inputs) WARNING: log2_amp>0 can cause overflow!! - -The function implemented is : \f$\mathbf{y} = \mathbf{x_1}\odot\mathbf{x_2}\f$ -*/ -int32_t mult_cpx_vector2(int16_t *x1, - int16_t *x2, - int16_t *y, - uint32_t N, - int32_t output_shift); - -/*!\fn int32_t mult_cpx_vector_add(int16_t *x1,int16_t *x2,int16_t *y,uint32_t N,int32_t output_shift) -This function performs optimized componentwise multiplication of two Q1.15 vectors. The output IS ADDED TO y. WARNING: make sure that output_shift is set to the right value, so that the result of the multiplication has the comma at the same place as y. - -@param x1 Input 1 in the format |Re0 Im0 Re0 Im0|,......,|Re(N-1) Im(N-1) Re(N-1) Im(N-1)| -@param x2 Input 2 in the format |Re0 -Im0 Im0 Re0|,......,|Re(N-1) -Im(N-1) Im(N-1) Re(N-1)| -@param y Output in the format |Re0 Im0 Re0 Im0|,......,|Re(N-1) Im(N-1) Re(N-1) Im(N-1)| -@param N Length of Vector WARNING: N>=4 -@param output_shift Number of bits to shift output down to Q1.15 (should be 15 for Q1.15 inputs) WARNING: log2_amp>0 can cause overflow!! - -The function implemented is : \f$\mathbf{y} += \mathbf{x_1}\odot\mathbf{x_2}\f$ -*/ - -int32_t mult_cpx_vector_add(int16_t *x1, - int16_t *x2, - int16_t *y, - uint32_t N, - int32_t output_shift); - - -int32_t mult_cpx_vector_h_add32(int16_t *x1, - int16_t *x2, - int16_t *y, - uint32_t N, - int16_t sign); - -int32_t mult_cpx_vector_add32(int16_t *x1, - int16_t *x2, - int16_t *y, - uint32_t N); - -int32_t mult_vector32(int16_t *x1, - int16_t *x2, +int rotate_cpx_vector(int16_t *x, + int16_t *alpha, int16_t *y, - uint32_t N); - -int32_t mult_vector32_scalar(int16_t *x1, - int32_t x2, - int16_t *y, - uint32_t N); - -int32_t mult_cpx_vector32_conj(int16_t *x, - int16_t *y, - uint32_t N); - -int32_t mult_cpx_vector32_real(int16_t *x1, - int16_t *x2, - int16_t *y, - uint32_t N); - -int32_t shift_and_pack(int16_t *y, - uint32_t N, - int32_t output_shift); - -/*!\fn int32_t mult_cpx_vector_h(int16_t *x1,int16_t *x2,int16_t *y,uint32_t N,int32_t output_shift,int16_t sign) -This function performs optimized componentwise multiplication of the vector x1 with the conjugate of the vector x2. The output IS ADDED TO y. WARNING: make sure that output_shift is set to the right value, so that the result of the multiplication has the comma at the same place as y. - -@param x1 Input 1 in the format |Re0 Im0 Re0 Im0|,......,|Re(N-1) Im(N-1) Re(N-1) Im(N-1)| -@param x2 Input 2 in the format |Re0 Im0 Re0 Im0|,......,|Re(N-1) Im(N-1) Re(N-1) Im(N-1)| -@param y Output in the format |Re0 Im0 Re0 Im0|,......,|Re(N-1) Im(N-1) Re(N-1) Im(N-1)| -@param N Length of Vector (complex samples) WARNING: N>=4 -@param output_shift Number of bits to shift output down to Q1.15 (should be 15 for Q1.15 inputs) WARNING: log2_amp>0 can cause overflow!! -@param sign +1..add, -1..substract - -The function implemented is : \f$\mathbf{y} = \mathbf{y} + \mathbf{x_1}\odot\mathbf{x_2}^*\f$ -*/ -int32_t mult_cpx_vector_h(int16_t *x1, - int16_t *x2, - int16_t *y, - uint32_t N, - int32_t output_shift, - int16_t sign); - -/*!\fn int32_t mult_cpx_matrix_h(int16_t *x1[2][2],int16_t *x2[2][2],int16_t *y[2][2],uint32_t N,uint16_t output_shift,int16_t hermitian) -This function performs optimized componentwise matrix multiplication of the 2x2 matrices x1 with the 2x2 matrices x2. The output IS ADDED TO y (i.e. make sure y is initilized correctly). WARNING: make sure that output_shift is set to the right value, so that the result of the multiplication has the comma at the same place as y. - -@param x1 Input 1 in the format |Re0 Im0 Re0 Im0|,......,|Re(N-1) Im(N-1) Re(N-1) Im(N-1)| -@param x2 Input 2 in the format |Re0 Im0 Re0 Im0|,......,|Re(N-1) Im(N-1) Re(N-1) Im(N-1)| -@param y Output in the format |Re0 Im0 Re0 Im0|,......,|Re(N-1) Im(N-1) Re(N-1) Im(N-1)| -@param N Length of Vector (complex samples) WARNING: N>=4 -@param output_shift Number of bits to shift output down to Q1.15 (should be 15 for Q1.15 inputs) WARNING: log2_amp>0 can cause overflow!! -@param hermitian if !=0 the hermitian transpose is returned (i.e. A^H*B instead of A*B^H) -*/ -int32_t mult_cpx_matrix_h(int16_t *x1[2][2], - int16_t *x2[2][2], - int16_t *y[2][2], - uint32_t N, - uint16_t output_shift, - int16_t hermitian); + uint32_t N, + uint16_t output_shift); -/*!\fn int32_t mult_cpx_matrix_vector(int32_t *x1[2][2],int32_t *x2[2],int32_t *y[2],uint32_t N,uint16_t output_shift) -This function performs optimized componentwise matrix-vector multiplication of the 2x2 matrices x1 with the 2x1 vectors x2. The output IS ADDED TO y (i.e. make sure y is initilized correctly). WARNING: make sure that output_shift is set to the right value, so that the result of the multiplication has the comma at the same place as y. -@param x1 Input 1 in the format |Re0 Im0 Re0 Im0|,......,|Re(N-1) Im(N-1) Re(N-1) Im(N-1)| -@param x2 Input 2 in the format |Re0 -Im0 Im0 Re0|,......,|Re(N-1) -Im(N-1) Im(N-1) Re(N-1)| -@param y Output in the format |Re0 Im0 Re0 Im0|,......,|Re(N-1) Im(N-1) Re(N-1) Im(N-1)| WARNING: y must be different for x2 -@param N Length of Vector (complex samples) WARNING: N>=4 -@param output_shift Number of bits to shift output down to Q1.15 (should be 15 for Q1.15 inputs) WARNING: log2_amp>0 can cause overflow!! -*/ -int32_t mult_cpx_matrix_vector(int32_t *x1[2][2], - int32_t *x2[2], - int32_t *y[2], - uint32_t N, - uint16_t output_shift); /*!\fn void init_fft(uint16_t size,uint8_t logsize,uint16_t *rev) \brief Initialize the FFT engine for a given size @@ -289,6 +113,25 @@ int32_t mult_cpx_matrix_vector(int32_t *x1[2][2], @param rev Pointer to bit-reversal permutation array */ +//cmult_vv.c +/*! + Multiply elementwise the complex conjugate of x1 with x2. + @param x1 - input 1 in the format |Re0 Im0 Re1 Im1|,......,|Re(N-2) Im(N-2) Re(N-1) Im(N-1)| + We assume x1 with a dinamic of 15 bit maximum + @param x2 - input 2 in the format |Re0 Im0 Re1 Im1|,......,|Re(N-2) Im(N-2) Re(N-1) Im(N-1)| + We assume x2 with a dinamic of 14 bit maximum + @param y - output in the format |Re0 Im0 Re1 Im1|,......,|Re(N-2) Im(N-2) Re(N-1) Im(N-1)| + @param N - the size f the vectors (this function does N cpx mpy. WARNING: N>=4; + @param output_shift - shift to be applied to generate output +*/ + +int mult_cpx_conj_vector(int16_t *x1, + int16_t *x2, + int16_t *y, + uint32_t N, + int output_shift); + +// lte_dfts.c void init_fft(uint16_t size, uint8_t logsize, uint16_t *rev); @@ -355,6 +198,7 @@ int32_t rotate_cpx_vector(int16_t *x, uint16_t output_shift); +//cadd_sv.c /*!\fn int32_t add_cpx_vector(int16_t *x,int16_t *alpha,int16_t *y,uint32_t N) This function performs componentwise addition of a vector with a complex scalar. diff --git a/openair1/PHY/TOOLS/time_meas.h b/openair1/PHY/TOOLS/time_meas.h index a3df897053..3e621ac281 100644 --- a/openair1/PHY/TOOLS/time_meas.h +++ b/openair1/PHY/TOOLS/time_meas.h @@ -26,6 +26,9 @@ Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE *******************************************************************************/ +#ifndef __TIME_MEAS_DEFS__H__ +#define __TIME_MEAS_DEFS__H__ + #include #include #include @@ -148,3 +151,4 @@ static inline void copy_meas(time_stats_t *dst_ts,time_stats_t *src_ts) dst_ts->max=src_ts->max; } } +#endif From 38d8a7cde079a17caf6e7b8b20e0facefab27de0 Mon Sep 17 00:00:00 2001 From: Aikaterini Date: Fri, 19 Feb 2016 13:11:02 +0100 Subject: [PATCH 45/55] add config file for usrpb210@band13 --- .../CONF/enb.band13.tm1.usrpb210.conf | 171 ++++++++++++++++++ 1 file changed, 171 insertions(+) create mode 100644 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band13.tm1.usrpb210.conf diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band13.tm1.usrpb210.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band13.tm1.usrpb210.conf new file mode 100644 index 0000000000..69d8536217 --- /dev/null +++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band13.tm1.usrpb210.conf @@ -0,0 +1,171 @@ +Active_eNBs = ( "eNB_Eurecom_LTEBox"); +# Asn1_verbosity, choice in: none, info, annoying +Asn1_verbosity = "none"; + +eNBs = +( + { + ////////// Identification parameters: + eNB_ID = 0xe00; + + cell_type = "CELL_MACRO_ENB"; + + eNB_name = "eNB_Eurecom_LTEBox"; + + // Tracking area code, 0x0000 and 0xfffe are reserved values + tracking_area_code = "1"; + + mobile_country_code = "208"; + + mobile_network_code = "95"; + + ////////// Physical parameters: + + component_carriers = ( + { + frame_type = "FDD"; + tdd_config = 3; + tdd_config_s = 0; + prefix_type = "NORMAL"; + eutra_band = 13; + downlink_frequency = 751000000L; + uplink_frequency_offset = 31000000; + Nid_cell = 0; + N_RB_DL = 25; + Nid_cell_mbsfn = 0; + nb_antennas_tx = 1; + nb_antennas_rx = 1; + tx_gain = 90; + rx_gain = 100; + prach_root = 0; + prach_config_index = 0; + prach_high_speed = "DISABLE"; + prach_zero_correlation = 1; + prach_freq_offset = 2; + pucch_delta_shift = 1; + pucch_nRB_CQI = 1; + pucch_nCS_AN = 0; + pucch_n1_AN = 32; + pdsch_referenceSignalPower = -15; + pdsch_p_b = 0; + pusch_n_SB = 1; + pusch_enable64QAM = "DISABLE"; + pusch_hoppingMode = "interSubFrame"; + pusch_hoppingOffset = 0; + pusch_groupHoppingEnabled = "ENABLE"; + pusch_groupAssignment = 0; + pusch_sequenceHoppingEnabled = "DISABLE"; + pusch_nDMRS1 = 1; + phich_duration = "NORMAL"; + phich_resource = "ONESIXTH"; + srs_enable = "DISABLE"; + /* srs_BandwidthConfig =; + srs_SubframeConfig =; + srs_ackNackST =; + srs_MaxUpPts =;*/ + + pusch_p0_Nominal = -86; + pusch_alpha = "AL1"; + pucch_p0_Nominal = -96; + msg3_delta_Preamble = 6; + pucch_deltaF_Format1 = "deltaF2"; + pucch_deltaF_Format1b = "deltaF3"; + pucch_deltaF_Format2 = "deltaF0"; + pucch_deltaF_Format2a = "deltaF0"; + pucch_deltaF_Format2b = "deltaF0"; + + rach_numberOfRA_Preambles = 64; + rach_preamblesGroupAConfig = "DISABLE"; + /* + rach_sizeOfRA_PreamblesGroupA = ; + rach_messageSizeGroupA = ; + rach_messagePowerOffsetGroupB = ; + */ + rach_powerRampingStep = 4; + rach_preambleInitialReceivedTargetPower = -108; + rach_preambleTransMax = 10; + rach_raResponseWindowSize = 10; + rach_macContentionResolutionTimer = 48; + rach_maxHARQ_Msg3Tx = 4; + + pcch_default_PagingCycle = 128; + pcch_nB = "oneT"; + bcch_modificationPeriodCoeff = 2; + ue_TimersAndConstants_t300 = 1000; + ue_TimersAndConstants_t301 = 1000; + ue_TimersAndConstants_t310 = 1000; + ue_TimersAndConstants_t311 = 10000; + ue_TimersAndConstants_n310 = 20; + ue_TimersAndConstants_n311 = 1; + + } + ); + + + srb1_parameters : + { + # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500] + timer_poll_retransmit = 80; + + # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200] + timer_reordering = 35; + + # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500] + timer_status_prohibit = 0; + + # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)] + poll_pdu = 4; + + # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)] + poll_byte = 99999; + + # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32] + max_retx_threshold = 4; + } + + # ------- SCTP definitions + SCTP : + { + # Number of streams to use in input/output + SCTP_INSTREAMS = 2; + SCTP_OUTSTREAMS = 2; + }; + + + ////////// MME parameters: + mme_ip_address = ( { ipv4 = "192.168.12.62"; + ipv6 = "192:168:30::17"; + active = "yes"; + preference = "ipv4"; + } + ); + + NETWORK_INTERFACES : + { + ENB_INTERFACE_NAME_FOR_S1_MME = "eth4"; + ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.242/24"; + + ENB_INTERFACE_NAME_FOR_S1U = "eth4"; + ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.242/24"; + ENB_PORT_FOR_S1U = 2152; # Spec 2152 + }; + + log_config : + { + global_log_level ="info"; + global_log_verbosity ="medium"; + hw_log_level ="info"; + hw_log_verbosity ="medium"; + phy_log_level ="info"; + phy_log_verbosity ="medium"; + mac_log_level ="info"; + mac_log_verbosity ="high"; + rlc_log_level ="info"; + rlc_log_verbosity ="medium"; + pdcp_log_level ="info"; + pdcp_log_verbosity ="medium"; + rrc_log_level ="info"; + rrc_log_verbosity ="medium"; + }; + } +); From f261adc74fcc427afabcaeba43b5c90358d6790a Mon Sep 17 00:00:00 2001 From: Aikaterini Date: Fri, 19 Feb 2016 13:30:20 +0100 Subject: [PATCH 46/55] add config file for rrh+usrp@band13 --- .../CONF/enb.band13.tm1.rrh.usrpb210.conf | 190 ++++++++++++++++++ 1 file changed, 190 insertions(+) create mode 100644 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band13.tm1.rrh.usrpb210.conf diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band13.tm1.rrh.usrpb210.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band13.tm1.rrh.usrpb210.conf new file mode 100644 index 0000000000..98226144ab --- /dev/null +++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band13.tm1.rrh.usrpb210.conf @@ -0,0 +1,190 @@ +Active_eNBs = ( "eNB_Eurecom_LTEBox"); +# Asn1_verbosity, choice in: none, info, annoying +Asn1_verbosity = "none"; + +eNBs = +( + { + ////////// Identification parameters: + eNB_ID = 0xe00; + + cell_type = "CELL_MACRO_ENB"; + + eNB_name = "eNB_Eurecom_LTEBox"; + + // Tracking area code, 0x0000 and 0xfffe are reserved values + tracking_area_code = "1"; + + mobile_country_code = "208"; + + mobile_network_code = "95"; + + ////////// Physical parameters: + + component_carriers = ( + { + frame_type = "FDD"; + tdd_config = 3; + tdd_config_s = 0; + prefix_type = "NORMAL"; + eutra_band = 13; + downlink_frequency = 751000000L; + uplink_frequency_offset = 31000000; + Nid_cell = 0; + N_RB_DL = 25; + Nid_cell_mbsfn = 0; + nb_antennas_tx = 1; + nb_antennas_rx = 1; + tx_gain = 90; + rx_gain = 100; + prach_root = 0; + prach_config_index = 0; + prach_high_speed = "DISABLE"; + prach_zero_correlation = 1; + prach_freq_offset = 2; + pucch_delta_shift = 1; + pucch_nRB_CQI = 1; + pucch_nCS_AN = 0; + pucch_n1_AN = 32; + pdsch_referenceSignalPower = -15; + pdsch_p_b = 0; + pusch_n_SB = 1; + pusch_enable64QAM = "DISABLE"; + pusch_hoppingMode = "interSubFrame"; + pusch_hoppingOffset = 0; + pusch_groupHoppingEnabled = "ENABLE"; + pusch_groupAssignment = 0; + pusch_sequenceHoppingEnabled = "DISABLE"; + pusch_nDMRS1 = 1; + phich_duration = "NORMAL"; + phich_resource = "ONESIXTH"; + srs_enable = "DISABLE"; + /* srs_BandwidthConfig =; + srs_SubframeConfig =; + srs_ackNackST =; + srs_MaxUpPts =;*/ + + pusch_p0_Nominal = -86; + pusch_alpha = "AL1"; + pucch_p0_Nominal = -96; + msg3_delta_Preamble = 6; + pucch_deltaF_Format1 = "deltaF2"; + pucch_deltaF_Format1b = "deltaF3"; + pucch_deltaF_Format2 = "deltaF0"; + pucch_deltaF_Format2a = "deltaF0"; + pucch_deltaF_Format2b = "deltaF0"; + + rach_numberOfRA_Preambles = 64; + rach_preamblesGroupAConfig = "DISABLE"; + /* + rach_sizeOfRA_PreamblesGroupA = ; + rach_messageSizeGroupA = ; + rach_messagePowerOffsetGroupB = ; + */ + rach_powerRampingStep = 4; + rach_preambleInitialReceivedTargetPower = -108; + rach_preambleTransMax = 10; + rach_raResponseWindowSize = 10; + rach_macContentionResolutionTimer = 48; + rach_maxHARQ_Msg3Tx = 4; + + pcch_default_PagingCycle = 128; + pcch_nB = "oneT"; + bcch_modificationPeriodCoeff = 2; + ue_TimersAndConstants_t300 = 1000; + ue_TimersAndConstants_t301 = 1000; + ue_TimersAndConstants_t310 = 1000; + ue_TimersAndConstants_t311 = 10000; + ue_TimersAndConstants_n310 = 20; + ue_TimersAndConstants_n311 = 1; + + } + ); + + + srb1_parameters : + { + # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500] + timer_poll_retransmit = 80; + + # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200] + timer_reordering = 35; + + # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500] + timer_status_prohibit = 0; + + # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)] + poll_pdu = 4; + + # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)] + poll_byte = 99999; + + # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32] + max_retx_threshold = 4; + } + + # ------- SCTP definitions + SCTP : + { + # Number of streams to use in input/output + SCTP_INSTREAMS = 2; + SCTP_OUTSTREAMS = 2; + }; + + + ////////// MME parameters: + mme_ip_address = ( { ipv4 = "192.168.12.62"; + ipv6 = "192:168:30::17"; + active = "yes"; + preference = "ipv4"; + } + ); + +rrh_gw_config = ( + { + local_if_name = "eth0"; + #remote_address = "169.254.10.158"; + #local_address = "169.254.8.15"; + remote_address = "74:d4:35:cc:88:45"; + local_address = "98:90:96:df:66:07"; + local_port = 50000; #for raw option local port must be the same to remote + remote_port = 50000; + rrh_gw_active = "yes"; + tr_preference = "raw"; + rf_preference = "usrp_b200"; + iq_txshift = 5; + tx_sample_advance = 70; + tx_scheduling_advance = 9; + +} +); + + NETWORK_INTERFACES : + { + ENB_INTERFACE_NAME_FOR_S1_MME = "eth4"; + ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.242/24"; + + ENB_INTERFACE_NAME_FOR_S1U = "eth4"; + ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.242/24"; + ENB_PORT_FOR_S1U = 2152; # Spec 2152 + }; + + log_config : + { + global_log_level ="info"; + global_log_verbosity ="medium"; + hw_log_level ="info"; + hw_log_verbosity ="medium"; + phy_log_level ="info"; + phy_log_verbosity ="medium"; + mac_log_level ="info"; + mac_log_verbosity ="high"; + rlc_log_level ="info"; + rlc_log_verbosity ="medium"; + pdcp_log_level ="info"; + pdcp_log_verbosity ="medium"; + rrc_log_level ="info"; + rrc_log_verbosity ="medium"; + }; + } +); From eb48479b37b28d8a82689a017771771beba78615 Mon Sep 17 00:00:00 2001 From: Navid Nikaein Date: Fri, 19 Feb 2016 15:12:41 +0100 Subject: [PATCH 47/55] check the rf_config_file name, and ignore if it is null --- targets/RT/USER/rrh_gw.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/targets/RT/USER/rrh_gw.c b/targets/RT/USER/rrh_gw.c index 3def754e3d..8084644b85 100644 --- a/targets/RT/USER/rrh_gw.c +++ b/targets/RT/USER/rrh_gw.c @@ -299,11 +299,17 @@ static void get_options(int argc, char *argv[]) { loopback_flag=1; break; case 'f': - if (strlen(optarg)<=1024) - strcpy(rf_config_file,optarg); - else { - printf("Configuration filename is too long\n"); - exit(-1); + if (optarg){ + if ((strcmp("null", optarg) == 0) || (strcmp("NULL", optarg) == 0)) { + printf("no configuration filename is provided\n"); + } + else if (strlen(optarg)<=1024){ + // rf_config_file = strdup(optarg); + strcpy(rf_config_file,optarg); + }else { + printf("Configuration filename is too long\n"); + exit(-1); + } } break; case 't': From 3af10bca146ee7bef52d60f21c8dcfaa35a05f3c Mon Sep 17 00:00:00 2001 From: Rohit Gupta Date: Sun, 21 Feb 2016 14:46:15 +0100 Subject: [PATCH 48/55] config files for band13 --- ...sodera_lowband_Wrx_10MHz_rx19dB_txfull.ini | 1128 +++++++++++++++++ .../CONF/enb.band13.tm1.50PRB.lmssdr.conf | 171 +++ .../CONF/enb.band13.tm1.lmssdr.conf | 171 +++ .../CONF/enb.band7.tm1.50PRB.lmssdr.conf | 4 +- 4 files changed, 1472 insertions(+), 2 deletions(-) create mode 100644 targets/ARCH/LMSSDR/enb_sodera_lowband_Wrx_10MHz_rx19dB_txfull.ini create mode 100644 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band13.tm1.50PRB.lmssdr.conf create mode 100644 targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band13.tm1.lmssdr.conf diff --git a/targets/ARCH/LMSSDR/enb_sodera_lowband_Wrx_10MHz_rx19dB_txfull.ini b/targets/ARCH/LMSSDR/enb_sodera_lowband_Wrx_10MHz_rx19dB_txfull.ini new file mode 100644 index 0000000000..a0793ad395 --- /dev/null +++ b/targets/ARCH/LMSSDR/enb_sodera_lowband_Wrx_10MHz_rx19dB_txfull.ini @@ -0,0 +1,1128 @@ +[reference_clocks] +sxr_ref_clk_mhz=30.72 +sxt_ref_clk_mhz=30.72 +[lms7002_registers_b] +0x03A0=0x0000 +0x054E=0x0000 +0x02D0=0x0000 +0x0386=0x0000 +0x054F=0x0000 +0x0389=0x0000 +0x040F=0x0000 +0x04E3=0x0000 +0x0385=0x0000 +0x0315=0x0000 +0x0384=0x0000 +0x0382=0x0000 +0x0288=0x0000 +0x0381=0x0000 +0x0366=0x0000 +0x0365=0x0000 +0x0364=0x0000 +0x0325=0x0000 +0x035E=0x0000 +0x035D=0x0000 +0x0442=0x0000 +0x0452=0x0000 +0x0299=0x0000 +0x0359=0x0000 +0x029D=0x0000 +0x04A3=0x0000 +0x040E=0x0000 +0x0316=0x0000 +0x030D=0x0000 +0x0356=0x0000 +0x0348=0x0000 +0x0498=0x0000 +0x0490=0x0000 +0x02CD=0x0000 +0x050D=0x0000 +0x0353=0x0000 +0x0351=0x0000 +0x048F=0x0000 +0x0445=0x0000 +0x0350=0x0000 +0x03A6=0x0000 +0x0293=0x0000 +0x034E=0x0000 +0x035C=0x0000 +0x034D=0x0000 +0x034B=0x0000 +0x011A=0x2E02 +0x0455=0x0000 +0x034A=0x0000 +0x035B=0x0000 +0x0505=0x0000 +0x0345=0x0000 +0x035F=0x0000 +0x0597=0x0000 +0x0586=0x0000 +0x0484=0x0000 +0x02C8=0x0000 +0x035A=0x0000 +0x0561=0x0000 +0x0344=0x0000 +0x0343=0x0000 +0x0342=0x0000 +0x0380=0x0000 +0x0327=0x0000 +0x025E=0x0000 +0x04DA=0x0000 +0x04C2=0x0000 +0x028C=0x0000 +0x0352=0x0000 +0x059C=0x0000 +0x04DD=0x0000 +0x028A=0x0000 +0x0289=0x0000 +0x031A=0x0000 +0x0363=0x0000 +0x0396=0x0000 +0x0284=0x0000 +0x010C=0x88FD +0x044C=0x0000 +0x0355=0x0000 +0x025C=0x0000 +0x0515=0x0000 +0x0361=0x0000 +0x0205=0x0000 +0x025B=0x0000 +0x04C5=0x0000 +0x04E2=0x0000 +0x025A=0x0000 +0x0256=0x0000 +0x0240=0x0020 +0x0367=0x0000 +0x05A3=0x0000 +0x0502=0x0000 +0x0258=0x0000 +0x0255=0x0000 +0x040C=0x0000 +0x028B=0x0000 +0x0253=0x0000 +0x024E=0x0000 +0x0346=0x0000 +0x0280=0x0000 +0x0285=0x0000 +0x024A=0x0000 +0x0261=0x0000 +0x0249=0x0000 +0x04CD=0x0000 +0x040A=0x0000 +0x0556=0x0000 +0x0243=0x0000 +0x051D=0x0000 +0x0494=0x0000 +0x024C=0x0000 +0x02DC=0x0000 +0x038F=0x0000 +0x0241=0x0000 +0x0488=0x0000 +0x0251=0x0000 +0x020B=0x4000 +0x0108=0x9442 +0x04A0=0x0000 +0x0116=0x8180 +0x02CC=0x0000 +0x039A=0x0000 +0x0112=0xC0E6 +0x0307=0x0000 +0x038C=0x0000 +0x0282=0x0000 +0x0321=0x0000 +0x0507=0x0000 +0x0483=0x0000 +0x0201=0x07FF +0x02E1=0x0000 +0x0517=0x0000 +0x0481=0x0000 +0x02D5=0x0000 +0x0259=0x0000 +0x0527=0x0000 +0x02DD=0x0000 +0x0209=0x0000 +0x0297=0x0000 +0x0400=0x0081 +0x0104=0x0088 +0x0103=0x0A12 +0x0347=0x0000 +0x02D8=0x0000 +0x0457=0x0000 +0x0306=0x0000 +0x02D1=0x0000 +0x04C8=0x0000 +0x0546=0x0000 +0x0440=0x0020 +0x045E=0x0000 +0x031D=0x0000 +0x039C=0x0000 +0x02D2=0x0000 +0x010E=0x2040 +0x02A0=0x0000 +0x0544=0x0000 +0x029C=0x0000 +0x055A=0x0000 +0x0295=0x0000 +0x02CF=0x0000 +0x04D1=0x0000 +0x0291=0x0000 +0x02DF=0x0000 +0x0290=0x0000 +0x020A=0x0080 +0x0102=0x3180 +0x0120=0xB9FF +0x0388=0x0000 +0x0318=0x0000 +0x02A7=0x0000 +0x0200=0x0081 +0x0594=0x0000 +0x02C5=0x0000 +0x028D=0x0000 +0x02A1=0x0000 +0x0362=0x0000 +0x038A=0x0000 +0x0395=0x0000 +0x058D=0x0000 +0x02D7=0x0000 +0x0305=0x0000 +0x0393=0x0000 +0x0398=0x0000 +0x0408=0x0000 +0x039B=0x0000 +0x049E=0x0000 +0x02DB=0x0000 +0x0357=0x0000 +0x02C2=0x0000 +0x0514=0x0000 +0x051C=0x0000 +0x03A2=0x0000 +0x03A4=0x0000 +0x03A3=0x0000 +0x0493=0x0000 +0x0454=0x0000 +0x0448=0x0000 +0x0397=0x0000 +0x02E3=0x0000 +0x049C=0x0000 +0x040D=0x0000 +0x0281=0x0000 +0x048C=0x0000 +0x049A=0x0000 +0x0119=0x18CB +0x010F=0x3042 +0x02A6=0x0000 +0x0257=0x0000 +0x04D6=0x0000 +0x04A6=0x0000 +0x0324=0x0000 +0x038E=0x0000 +0x02E7=0x0000 +0x034F=0x0000 +0x04E0=0x0000 +0x0123=0x267B +0x0497=0x0000 +0x0459=0x0000 +0x0394=0x0000 +0x04A5=0x0000 +0x04D9=0x0000 +0x0304=0x0000 +0x04D5=0x0000 +0x0508=0x0000 +0x0443=0x0000 +0x0301=0x0000 +0x0548=0x0000 +0x04D2=0x0000 +0x0592=0x0000 +0x0591=0x0000 +0x04C7=0x0000 +0x049D=0x0000 +0x029A=0x0000 +0x051F=0x0000 +0x0309=0x0000 +0x0585=0x0000 +0x03A5=0x0000 +0x02D3=0x0000 +0x0451=0x0000 +0x0390=0x0000 +0x0562=0x0000 +0x02C4=0x0000 +0x029E=0x0000 +0x031E=0x0000 +0x04C0=0x0000 +0x04DC=0x0000 +0x04DE=0x0000 +0x058B=0x0000 +0x04DB=0x0000 +0x04D0=0x0000 +0x0492=0x0000 +0x04A1=0x0000 +0x054B=0x0000 +0x02C7=0x0000 +0x05A0=0x0000 +0x044B=0x0000 +0x0100=0x3409 +0x04CA=0x0000 +0x0446=0x0000 +0x02E4=0x0000 +0x04E4=0x0000 +0x04C3=0x0000 +0x0496=0x0000 +0x04CF=0x0000 +0x025F=0x0000 +0x04D4=0x0000 +0x0504=0x0000 +0x04CE=0x0000 +0x02DE=0x0000 +0x0399=0x0000 +0x050C=0x0000 +0x02A5=0x0000 +0x04CC=0x0000 +0x03A1=0x0000 +0x04E1=0x0000 +0x02A2=0x0000 +0x040B=0x7FFF +0x0283=0x0000 +0x048E=0x0000 +0x0580=0x0000 +0x0409=0x0000 +0x039F=0x0000 +0x0248=0x0000 +0x048B=0x0000 +0x0358=0x0000 +0x0589=0x0000 +0x038D=0x0000 +0x0487=0x0000 +0x0510=0x0000 +0x0302=0x0000 +0x0486=0x0000 +0x045F=0x0000 +0x0480=0x0000 +0x0567=0x0000 +0x02DA=0x0000 +0x045A=0x0000 +0x0254=0x0000 +0x0405=0x0000 +0x0387=0x0000 +0x0458=0x0000 +0x0314=0x0000 +0x0360=0x0000 +0x0559=0x0000 +0x0456=0x0000 +0x0453=0x0000 +0x02E2=0x0000 +0x044D=0x0000 +0x0441=0x0000 +0x02C3=0x0000 +0x04C1=0x0000 +0x04D3=0x0000 +0x0444=0x0000 +0x0207=0x0000 +0x04C6=0x0000 +0x0296=0x0000 +0x0555=0x0000 +0x0349=0x0000 +0x0109=0x61C1 +0x04A2=0x0000 +0x0447=0x0000 +0x0460=0x0000 +0x048D=0x0000 +0x059A=0x0000 +0x0407=0x0000 +0x02C0=0x0000 +0x0499=0x0000 +0x0543=0x0000 +0x04C9=0x0000 +0x02CA=0x0000 +0x0404=0x0000 +0x0560=0x0000 +0x02C1=0x0000 +0x04D8=0x0000 +0x0403=0x0000 +0x0491=0x0000 +0x029B=0x0000 +0x04C4=0x0000 +0x010D=0x009E +0x0402=0x07FF +0x055E=0x0000 +0x03A7=0x0000 +0x0520=0x0000 +0x0392=0x0000 +0x030B=0x0000 +0x0588=0x0000 +0x0308=0x0000 +0x048A=0x0000 +0x044A=0x0000 +0x04A4=0x0000 +0x0300=0x0000 +0x0587=0x0000 +0x044E=0x0000 +0x055B=0x0000 +0x02E5=0x0000 +0x0114=0x008D +0x0323=0x0000 +0x0320=0x0000 +0x0503=0x0000 +0x0513=0x0000 +0x0319=0x0000 +0x0260=0x0000 +0x0549=0x0000 +0x0552=0x0000 +0x0509=0x0000 +0x0521=0x0000 +0x0286=0x0000 +0x04D7=0x0000 +0x059E=0x0000 +0x058F=0x0000 +0x0557=0x0000 +0x0322=0x0000 +0x059B=0x0000 +0x049F=0x0000 +0x0522=0x0000 +0x0545=0x0000 +0x0551=0x0000 +0x0312=0x0000 +0x055D=0x0000 +0x0298=0x0000 +0x055F=0x0000 +0x011D=0x9555 +0x039E=0x0000 +0x0547=0x0000 +0x0598=0x0000 +0x0449=0x0000 +0x0564=0x0000 +0x0242=0x0000 +0x0525=0x0000 +0x0523=0x0000 +0x0565=0x0000 +0x0124=0x0000 +0x0563=0x0000 +0x024D=0x0000 +0x05A5=0x0000 +0x0566=0x0000 +0x030A=0x0000 +0x029F=0x0000 +0x054C=0x0000 +0x0582=0x0000 +0x0599=0x0000 +0x0511=0x0000 +0x0506=0x0000 +0x0595=0x0000 +0x0584=0x0000 +0x058C=0x0000 +0x05A6=0x0000 +0x051E=0x0000 +0x050F=0x0000 +0x0590=0x0000 +0x0596=0x0000 +0x05A7=0x0000 +0x058A=0x0000 +0x059D=0x0000 +0x0485=0x0000 +0x0581=0x0000 +0x045D=0x0000 +0x0245=0x0000 +0x0310=0x0000 +0x058E=0x0000 +0x05A2=0x0000 +0x054D=0x0000 +0x020C=0x7FFF +0x031F=0x0000 +0x0292=0x0000 +0x059F=0x0000 +0x0583=0x0000 +0x0317=0x0000 +0x0244=0x0000 +0x0554=0x0000 +0x0593=0x0000 +0x05A4=0x0000 +0x02A3=0x0000 +0x0553=0x0000 +0x0542=0x0000 +0x0519=0x0000 +0x024F=0x0000 +0x0524=0x0000 +0x0518=0x0000 +0x0354=0x0000 +0x0526=0x0000 +0x031B=0x0000 +0x050E=0x0000 +0x0516=0x0000 +0x02CB=0x0000 +0x0250=0x0000 +0x031C=0x0000 +0x028F=0x0000 +0x051A=0x0000 +0x055C=0x0000 +0x050A=0x0000 +0x050B=0x0000 +0x04E7=0x0000 +0x04E6=0x0000 +0x04E5=0x0000 +0x0512=0x0000 +0x0206=0x0000 +0x0550=0x0000 +0x030E=0x0000 +0x0203=0x0000 +0x0482=0x0000 +0x0541=0x0000 +0x0122=0x033F +0x0110=0x0BF4 +0x0204=0x0000 +0x0252=0x0000 +0x011E=0x05DC +0x049B=0x0000 +0x0294=0x0000 +0x011C=0xAD41 +0x02D6=0x0000 +0x0311=0x0000 +0x0117=0x280C +0x02A4=0x0000 +0x0540=0x0000 +0x02E0=0x0000 +0x0118=0x018C +0x0489=0x0000 +0x04A7=0x0000 +0x0101=0x7800 +0x0558=0x0000 +0x02C6=0x0000 +0x05A1=0x0000 +0x02C9=0x0000 +0x039D=0x0000 +0x0500=0x0000 +0x0450=0x0000 +0x011F=0x3680 +0x030C=0x0000 +0x04DF=0x0000 +0x0106=0x3182 +0x028E=0x0000 +0x0326=0x0000 +0x0113=0x03C3 +0x04CB=0x0000 +0x0391=0x0000 +0x0105=0x0007 +0x02D9=0x0000 +0x02CE=0x0000 +0x044F=0x0000 +0x038B=0x0000 +0x02D4=0x0000 +0x0107=0x318C +0x0495=0x0000 +0x0246=0x0000 +0x0303=0x0000 +0x02E6=0x0000 +0x045B=0x0000 +0x0340=0x0000 +0x0208=0x0070 +0x0111=0x0083 +0x0247=0x0000 +0x024B=0x0000 +0x045C=0x0000 +0x0383=0x0000 +0x0202=0x07FF +0x054A=0x0000 +0x0401=0x07FF +0x0341=0x0000 +0x0287=0x0000 +0x034C=0x0000 +0x0501=0x0000 +0x030F=0x0000 +0x025D=0x0000 +0x0406=0x0000 +0x0313=0x0000 +0x010A=0x104C +0x0461=0x0000 +0x051B=0x0000 +0x0121=0x356A +0x0115=0x0009 +[lms7002_registers_a] +0x0107=0x318C +0x02D4=0x0000 +0x0082=0x8001 +0x0209=0x0000 +0x02CA=0x0000 +0x04C9=0x0000 +0x0120=0xB9FF +0x0388=0x0000 +0x029D=0x0000 +0x04A3=0x0000 +0x0208=0x0170 +0x0340=0x0000 +0x0094=0x0000 +0x0244=0x0000 +0x0317=0x0000 +0x00A9=0x8000 +0x0115=0x0009 +0x039A=0x0000 +0x0112=0x3171 +0x048C=0x0000 +0x0023=0x5550 +0x0587=0x1D10 +0x04C0=0x0000 +0x031E=0x0000 +0x0205=0x0000 +0x0361=0x0000 +0x051F=0xAB08 +0x029A=0x0000 +0x0396=0x0000 +0x0284=0x0000 +0x02CE=0x0000 +0x02D9=0x0000 +0x038B=0x0000 +0x044F=0x0000 +0x0367=0x0000 +0x0240=0x0028 +0x05A3=0x0000 +0x0105=0x0007 +0x009B=0x6565 +0x0400=0x0101 +0x02DB=0x0000 +0x0357=0x0000 +0x0104=0x0088 +0x0103=0x0A12 +0x0457=0x0000 +0x0347=0x0000 +0x02D8=0x0000 +0x010C=0x8865 +0x0086=0x4101 +0x0202=0x0794 +0x0383=0x0000 +0x020B=0x4000 +0x0108=0xFC26 +0x0098=0x0000 +0x0117=0x100C +0x0027=0x05E4 +0x00A7=0x6565 +0x024A=0x0000 +0x0029=0x0101 +0x00AD=0x03FF +0x0540=0x5009 +0x02A4=0x0000 +0x02DE=0x0000 +0x002E=0x0000 +0x0261=0x0000 +0x00AB=0x0040 +0x0564=0x0000 +0x00A8=0x0000 +0x0517=0xC89D +0x0481=0x0000 +0x02C1=0x0000 +0x0301=0x0000 +0x00A5=0x6565 +0x0515=0x2E45 +0x025C=0x0000 +0x009F=0x658C +0x0519=0x4049 +0x054B=0xF7A3 +0x02C7=0x0000 +0x038C=0x0000 +0x0307=0x0000 +0x0282=0x0000 +0x0289=0x0000 +0x011C=0xAD41 +0x0562=0xF524 +0x0025=0x0101 +0x02CC=0x0000 +0x0116=0x8180 +0x0597=0xFDFB +0x035F=0x0000 +0x002F=0x3840 +0x0589=0xEA5F +0x00A2=0x6565 +0x0099=0x6565 +0x0310=0x0000 +0x040C=0x40F8 +0x028B=0x0000 +0x0253=0x0000 +0x00AC=0x2000 +0x002D=0xFFFF +0x00A6=0x0001 +0x054D=0xF7A3 +0x002C=0x0000 +0x0249=0x0000 +0x04CD=0x0000 +0x0401=0x07FF +0x00A4=0x6565 +0x054A=0x8184 +0x038F=0x0000 +0x008C=0x267B +0x0241=0x0000 +0x0356=0x0000 +0x00A1=0x6565 +0x0260=0x0000 +0x0453=0x0000 +0x008A=0x0491 +0x048F=0x0000 +0x0445=0x0000 +0x0350=0x0000 +0x00AA=0x0000 +0x034C=0x0000 +0x0501=0xFDFB +0x0490=0x0000 +0x02CD=0x0000 +0x050D=0x0F45 +0x0353=0x0000 +0x0024=0x50D8 +0x04E5=0x0000 +0x0512=0x196B +0x0247=0x0000 +0x045C=0x0000 +0x024B=0x0000 +0x0395=0x0000 +0x011F=0x3680 +0x039D=0x0000 +0x0500=0xF61D +0x02C9=0x0000 +0x05A1=0x0000 +0x02A6=0x0000 +0x0119=0x18DF +0x010F=0x3042 +0x04CB=0x0000 +0x0391=0x0000 +0x0113=0x03C3 +0x0326=0x0000 +0x028E=0x0000 +0x0106=0x3182 +0x0524=0x3347 +0x009D=0x6565 +0x0294=0x0000 +0x0026=0x0101 +0x0110=0x0BFF +0x0122=0x033F +0x0381=0x0000 +0x009C=0x658C +0x05A0=0x0000 +0x0482=0x0000 +0x030E=0x0000 +0x0203=0x2F99 +0x0095=0x0000 +0x0111=0x0099 +0x0256=0x0000 +0x0089=0x0048 +0x0085=0x0001 +0x0088=0x04F0 +0x0459=0x0000 +0x0394=0x0000 +0x010E=0x0285 +0x02A0=0x0000 +0x002B=0x4032 +0x039C=0x0000 +0x02D2=0x0000 +0x0581=0xC89D +0x045D=0x0000 +0x0245=0x0000 +0x002A=0x0086 +0x0118=0x018C +0x02E0=0x0000 +0x0489=0x0000 +0x04A7=0x0000 +0x039E=0x0000 +0x011D=0x2AAA +0x02E1=0x0000 +0x0259=0x0000 +0x02D5=0x0000 +0x051D=0x4F91 +0x0243=0x0000 +0x0556=0xA2B5 +0x040A=0x1000 +0x05A2=0x0000 +0x020C=0x8000 +0x020A=0x0080 +0x0102=0x3180 +0x034F=0x0000 +0x0303=0x0000 +0x0306=0x0000 +0x0255=0x0000 +0x0300=0x0000 +0x044E=0x0000 +0x0309=0x0000 +0x0585=0xDAA2 +0x0527=0xACB9 +0x044A=0x0000 +0x04A4=0x0000 +0x048A=0x0000 +0x0392=0x0000 +0x030B=0x0000 +0x05A7=0x0000 +0x0252=0x0000 +0x0204=0xC016 +0x0308=0x0000 +0x0588=0xE6C7 +0x0321=0x0000 +0x0507=0xFCFE +0x0312=0x0000 +0x050B=0xF5EF +0x0360=0x0000 +0x0021=0x0E9F +0x04C2=0x0000 +0x030D=0x0000 +0x040E=0x0003 +0x0316=0x0000 +0x031F=0x0000 +0x030C=0x0000 +0x04DF=0x0000 +0x0318=0x0000 +0x0250=0x0000 +0x02CB=0x0000 +0x045E=0x0000 +0x0440=0x0024 +0x031D=0x0000 +0x058D=0xF5EF +0x02D7=0x0000 +0x0380=0x0000 +0x0342=0x0000 +0x0343=0x0000 +0x0566=0x0906 +0x0345=0x0000 +0x049C=0x0000 +0x02E3=0x0000 +0x0397=0x0000 +0x035B=0x0000 +0x0505=0x00D8 +0x028D=0x0000 +0x02A1=0x0000 +0x028F=0x0000 +0x031C=0x0000 +0x031A=0x0000 +0x0363=0x0000 +0x0596=0x0A94 +0x0354=0x0000 +0x0518=0xEFF2 +0x035C=0x0000 +0x034D=0x0000 +0x0344=0x0000 +0x0561=0xAB08 +0x0096=0x0000 +0x010D=0x01DC +0x04C4=0x0000 +0x0351=0x0000 +0x0311=0x0000 +0x02D6=0x0000 +0x02D1=0x0000 +0x0546=0x8D44 +0x04C8=0x0000 +0x048B=0x0000 +0x0358=0x0000 +0x0522=0xDB10 +0x049F=0x0000 +0x034A=0x0000 +0x0455=0x0000 +0x0359=0x0000 +0x03A4=0x0000 +0x03A3=0x0000 +0x0341=0x0000 +0x0287=0x0000 +0x04DA=0x0000 +0x025E=0x0000 +0x0580=0xEFF2 +0x0409=0x0000 +0x059A=0x0000 +0x048D=0x0000 +0x0514=0xE7E2 +0x039B=0x0000 +0x0101=0x7800 +0x0558=0x5009 +0x02C6=0x0000 +0x051B=0xB77F +0x0313=0x0000 +0x010A=0x104C +0x0461=0x0000 +0x0406=0x0000 +0x030F=0x0000 +0x025D=0x0000 +0x034B=0x0000 +0x011A=0x2E14 +0x029F=0x0000 +0x030A=0x0000 +0x034E=0x0000 +0x0293=0x0000 +0x03A6=0x0000 +0x0560=0x174B +0x0404=0x0000 +0x00A0=0x6565 +0x0547=0xD7B7 +0x0454=0x0000 +0x0448=0x0000 +0x0327=0x0000 +0x0305=0x0000 +0x0393=0x0000 +0x0510=0xE6C7 +0x0302=0x0000 +0x0486=0x0000 +0x045F=0x0000 +0x0365=0x0000 +0x048E=0x0000 +0x0022=0x07FF +0x0283=0x0000 +0x044B=0x0000 +0x045A=0x0000 +0x02DA=0x0000 +0x04E4=0x0000 +0x02E4=0x0000 +0x03A5=0x0000 +0x040B=0x000F +0x0366=0x0000 +0x0443=0x0000 +0x0508=0xEF99 +0x00A3=0x6565 +0x02E2=0x0000 +0x044D=0x0000 +0x0314=0x0000 +0x0458=0x0000 +0x0493=0x0000 +0x0346=0x0000 +0x024E=0x0000 +0x055E=0xDB10 +0x0402=0x07D9 +0x0384=0x0000 +0x02E6=0x0000 +0x045B=0x0000 +0x0480=0x0000 +0x0567=0x4049 +0x04CA=0x0000 +0x0446=0x0000 +0x0447=0x0000 +0x0460=0x0000 +0x0559=0xACB9 +0x0456=0x0000 +0x0441=0x0000 +0x0444=0x0000 +0x0390=0x0000 +0x0451=0x0000 +0x049E=0x0000 +0x0324=0x0000 +0x02E7=0x0000 +0x038E=0x0000 +0x0403=0x0013 +0x04D8=0x0000 +0x029B=0x0000 +0x0491=0x0000 +0x03A1=0x0000 +0x04E1=0x0000 +0x02A2=0x0000 +0x051C=0x0000 +0x03A2=0x0000 +0x0407=0x0000 +0x0258=0x0000 +0x0502=0x0A94 +0x038A=0x0000 +0x0362=0x0000 +0x028C=0x0000 +0x0352=0x0000 +0x0385=0x0000 +0x0315=0x0000 +0x040D=0x0000 +0x039F=0x0000 +0x0248=0x0000 +0x0405=0x0000 +0x0254=0x0000 +0x0398=0x0000 +0x0408=0x0000 +0x0487=0x0000 +0x038D=0x0000 +0x035E=0x0000 +0x03A7=0x0000 +0x0520=0x174B +0x0449=0x0000 +0x02C8=0x0000 +0x035A=0x0000 +0x0387=0x0000 +0x0386=0x0000 +0x0452=0x0000 +0x0299=0x0000 +0x0084=0x0400 +0x0498=0x0000 +0x0348=0x0000 +0x02D0=0x0000 +0x054E=0x8184 +0x03A0=0x0000 +0x009A=0x658C +0x055D=0xA6B5 +0x0298=0x0000 +0x0364=0x0000 +0x0081=0x0000 +0x0325=0x0000 +0x040F=0x43E4 +0x04E3=0x0000 +0x050E=0x17DC +0x0516=0x150F +0x0389=0x0000 +0x054F=0x18C9 +0x0304=0x0000 +0x04D5=0x0000 +0x059B=0x0000 +0x0322=0x0000 +0x0442=0x0000 +0x035D=0x0000 +0x0492=0x0000 +0x04A1=0x0000 +0x0382=0x0000 +0x0288=0x0000 +0x0296=0x0000 +0x0555=0xBD96 +0x0349=0x0000 +0x0484=0x0000 +0x0586=0x196B +0x0281=0x0000 +0x0200=0x0301 +0x0594=0xF40D +0x02C5=0x0000 +0x0319=0x0000 +0x0121=0x3652 +0x025B=0x0000 +0x0290=0x0000 +0x02DF=0x0000 +0x0291=0x0000 +0x029C=0x0000 +0x008B=0x2756 +0x02A3=0x0000 +0x05A4=0x0000 +0x02A7=0x0000 +0x0483=0x0000 +0x0201=0x07FF +0x02C2=0x0000 +0x02C4=0x0000 +0x0207=0x0000 +0x04C6=0x0000 +0x0093=0x0000 +0x02D3=0x0000 +0x0494=0x0000 +0x04CF=0x0000 +0x025F=0x0000 +0x0251=0x0000 +0x0488=0x0000 +0x0496=0x0000 +0x04C3=0x0000 +0x0100=0xB409 +0x04CC=0x0000 +0x02A5=0x0000 +0x0257=0x0000 +0x04D6=0x0000 +0x04A6=0x0000 +0x049A=0x0000 +0x049B=0x0000 +0x0097=0x0000 +0x011E=0x061D +0x0285=0x0000 +0x0280=0x0000 +0x0020=0xFFFD +0x02DD=0x0000 +0x0297=0x0000 +0x044C=0x0000 +0x0355=0x0000 +0x04A0=0x0000 +0x02CF=0x0000 +0x04D1=0x0000 +0x0526=0xBE2A +0x0092=0x0001 +0x031B=0x0000 +0x0541=0x4C24 +0x0543=0xBD96 +0x02C0=0x0000 +0x0499=0x0000 +0x0513=0xDAA2 +0x0549=0x18C9 +0x0552=0x8D44 +0x0521=0x5852 +0x0509=0x0605 +0x0286=0x0000 +0x024F=0x0000 +0x04E0=0x0000 +0x0545=0x364E +0x0551=0xD7B7 +0x055F=0x5852 +0x009E=0x658C +0x0598=0xF61D +0x0123=0x067B +0x0497=0x0000 +0x04A5=0x0000 +0x0565=0xB77F +0x0124=0x0000 +0x0592=0x0DF1 +0x0591=0xFCFE +0x0548=0x79FA +0x04D2=0x0000 +0x0599=0x0000 +0x0511=0x1D10 +0x0506=0x0DF1 +0x0595=0x00BC +0x0584=0xE7E2 +0x0242=0x0000 +0x025A=0x0000 +0x04E2=0x0000 +0x04C5=0x0000 +0x058C=0xEA50 +0x0450=0x0000 +0x058A=0x17DC +0x059D=0x0000 +0x0485=0x0000 +0x058E=0x1316 +0x0550=0x79FA +0x0554=0x6901 +0x0593=0x00D8 +0x0553=0x364E +0x0542=0xA2B5 +0x0563=0x4F91 +0x024D=0x0000 +0x055A=0xBE2A +0x0295=0x0000 +0x028A=0x0000 +0x059C=0x0000 +0x04DD=0x0000 +0x054C=0x7FFF +0x0582=0x150F +0x0109=0x8CC1 +0x04A2=0x0000 +0x0292=0x0000 +0x0583=0x2E45 +0x059F=0x0000 +0x0525=0x57AC +0x0523=0xA6B5 +0x0206=0x0000 +0x051A=0x0906 +0x055C=0x3347 +0x05A6=0x0000 +0x050F=0xEA5F +0x051E=0xF524 +0x050A=0x1316 +0x04C7=0x0000 +0x049D=0x0000 +0x050C=0xEA50 +0x0087=0x0000 +0x0399=0x0000 +0x0495=0x0000 +0x0246=0x0000 +0x0503=0x00BC +0x0320=0x0000 +0x0323=0x0000 +0x055B=0x57AC +0x0114=0x0110 +0x02E5=0x0000 +0x04E7=0x0000 +0x04D0=0x0000 +0x04E6=0x0000 +0x00AE=0x0000 +0x0544=0x6901 +0x04DE=0x0000 +0x058B=0x0F45 +0x0028=0x0101 +0x029E=0x0000 +0x04DC=0x0000 +0x04D9=0x0000 +0x058F=0x0605 +0x0557=0x4C24 +0x04DB=0x0000 +0x04D7=0x0000 +0x059E=0x0000 +0x024C=0x0000 +0x02DC=0x0000 +0x04D4=0x0000 +0x0504=0xF40D +0x02C3=0x0000 +0x04C1=0x0000 +0x04D3=0x0000 +0x0590=0xEF99 +0x04CE=0x0000 +0x05A5=0x0000 +[file_info] +version=1 +type=lms7002m_minimal_config diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band13.tm1.50PRB.lmssdr.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band13.tm1.50PRB.lmssdr.conf new file mode 100644 index 0000000000..6b93021426 --- /dev/null +++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band13.tm1.50PRB.lmssdr.conf @@ -0,0 +1,171 @@ +Active_eNBs = ( "eNB_Eurecom_LTEBox"); +# Asn1_verbosity, choice in: none, info, annoying +Asn1_verbosity = "none"; + +eNBs = +( + { + ////////// Identification parameters: + eNB_ID = 0xe00; + + cell_type = "CELL_MACRO_ENB"; + + eNB_name = "eNB_Eurecom_LTEBox"; + + // Tracking area code, 0x0000 and 0xfffe are reserved values + tracking_area_code = "1"; + + mobile_country_code = "208"; + + mobile_network_code = "95"; + + ////////// Physical parameters: + + component_carriers = ( + { + frame_type = "FDD"; + tdd_config = 3; + tdd_config_s = 0; + prefix_type = "NORMAL"; + eutra_band = 13; + downlink_frequency = 751000000L; + uplink_frequency_offset = 31000000; + Nid_cell = 0; + N_RB_DL = 50; + Nid_cell_mbsfn = 0; + nb_antennas_tx = 1; + nb_antennas_rx = 1; + tx_gain = 90; + rx_gain = 125; + prach_root = 0; + prach_config_index = 0; + prach_high_speed = "DISABLE"; + prach_zero_correlation = 1; + prach_freq_offset = 2; + pucch_delta_shift = 1; + pucch_nRB_CQI = 1; + pucch_nCS_AN = 0; + pucch_n1_AN = 32; + pdsch_referenceSignalPower = -20; + pdsch_p_b = 0; + pusch_n_SB = 1; + pusch_enable64QAM = "DISABLE"; + pusch_hoppingMode = "interSubFrame"; + pusch_hoppingOffset = 0; + pusch_groupHoppingEnabled = "ENABLE"; + pusch_groupAssignment = 0; + pusch_sequenceHoppingEnabled = "DISABLE"; + pusch_nDMRS1 = 1; + phich_duration = "NORMAL"; + phich_resource = "ONESIXTH"; + srs_enable = "DISABLE"; + /* srs_BandwidthConfig =; + srs_SubframeConfig =; + srs_ackNackST =; + srs_MaxUpPts =;*/ + + pusch_p0_Nominal = -90; + pusch_alpha = "AL1"; + pucch_p0_Nominal = -96; + msg3_delta_Preamble = 6; + pucch_deltaF_Format1 = "deltaF2"; + pucch_deltaF_Format1b = "deltaF3"; + pucch_deltaF_Format2 = "deltaF0"; + pucch_deltaF_Format2a = "deltaF0"; + pucch_deltaF_Format2b = "deltaF0"; + + rach_numberOfRA_Preambles = 64; + rach_preamblesGroupAConfig = "DISABLE"; + /* + rach_sizeOfRA_PreamblesGroupA = ; + rach_messageSizeGroupA = ; + rach_messagePowerOffsetGroupB = ; + */ + rach_powerRampingStep = 4; + rach_preambleInitialReceivedTargetPower = -108; + rach_preambleTransMax = 10; + rach_raResponseWindowSize = 10; + rach_macContentionResolutionTimer = 48; + rach_maxHARQ_Msg3Tx = 4; + + pcch_default_PagingCycle = 128; + pcch_nB = "oneT"; + bcch_modificationPeriodCoeff = 2; + ue_TimersAndConstants_t300 = 1000; + ue_TimersAndConstants_t301 = 1000; + ue_TimersAndConstants_t310 = 1000; + ue_TimersAndConstants_t311 = 10000; + ue_TimersAndConstants_n310 = 20; + ue_TimersAndConstants_n311 = 1; + + } + ); + + + srb1_parameters : + { + # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500] + timer_poll_retransmit = 80; + + # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200] + timer_reordering = 35; + + # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500] + timer_status_prohibit = 0; + + # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)] + poll_pdu = 4; + + # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)] + poll_byte = 99999; + + # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32] + max_retx_threshold = 4; + } + + # ------- SCTP definitions + SCTP : + { + # Number of streams to use in input/output + SCTP_INSTREAMS = 2; + SCTP_OUTSTREAMS = 2; + }; + + + ////////// MME parameters: + mme_ip_address = ( { ipv4 = "192.168.12.62"; + ipv6 = "192:168:30::17"; + active = "yes"; + preference = "ipv4"; + } + ); + + NETWORK_INTERFACES : + { + ENB_INTERFACE_NAME_FOR_S1_MME = "eth4"; + ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.242/24"; + + ENB_INTERFACE_NAME_FOR_S1U = "eth4"; + ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.242/24"; + ENB_PORT_FOR_S1U = 2152; # Spec 2152 + }; + + log_config : + { + global_log_level ="info"; + global_log_verbosity ="medium"; + hw_log_level ="info"; + hw_log_verbosity ="medium"; + phy_log_level ="info"; + phy_log_verbosity ="medium"; + mac_log_level ="info"; + mac_log_verbosity ="high"; + rlc_log_level ="info"; + rlc_log_verbosity ="medium"; + pdcp_log_level ="info"; + pdcp_log_verbosity ="medium"; + rrc_log_level ="info"; + rrc_log_verbosity ="medium"; + }; + } +); diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band13.tm1.lmssdr.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band13.tm1.lmssdr.conf new file mode 100644 index 0000000000..dacc3e8664 --- /dev/null +++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band13.tm1.lmssdr.conf @@ -0,0 +1,171 @@ +Active_eNBs = ( "eNB_Eurecom_LTEBox"); +# Asn1_verbosity, choice in: none, info, annoying +Asn1_verbosity = "none"; + +eNBs = +( + { + ////////// Identification parameters: + eNB_ID = 0xe00; + + cell_type = "CELL_MACRO_ENB"; + + eNB_name = "eNB_Eurecom_LTEBox"; + + // Tracking area code, 0x0000 and 0xfffe are reserved values + tracking_area_code = "1"; + + mobile_country_code = "208"; + + mobile_network_code = "95"; + + ////////// Physical parameters: + + component_carriers = ( + { + frame_type = "FDD"; + tdd_config = 3; + tdd_config_s = 0; + prefix_type = "NORMAL"; + eutra_band = 13; + downlink_frequency = 751000000L; + uplink_frequency_offset = 31000000; + Nid_cell = 0; + N_RB_DL = 25; + Nid_cell_mbsfn = 0; + nb_antennas_tx = 1; + nb_antennas_rx = 1; + tx_gain = 90; + rx_gain = 125; + prach_root = 0; + prach_config_index = 0; + prach_high_speed = "DISABLE"; + prach_zero_correlation = 1; + prach_freq_offset = 2; + pucch_delta_shift = 1; + pucch_nRB_CQI = 1; + pucch_nCS_AN = 0; + pucch_n1_AN = 32; + pdsch_referenceSignalPower = -17; + pdsch_p_b = 0; + pusch_n_SB = 1; + pusch_enable64QAM = "DISABLE"; + pusch_hoppingMode = "interSubFrame"; + pusch_hoppingOffset = 0; + pusch_groupHoppingEnabled = "ENABLE"; + pusch_groupAssignment = 0; + pusch_sequenceHoppingEnabled = "DISABLE"; + pusch_nDMRS1 = 1; + phich_duration = "NORMAL"; + phich_resource = "ONESIXTH"; + srs_enable = "DISABLE"; + /* srs_BandwidthConfig =; + srs_SubframeConfig =; + srs_ackNackST =; + srs_MaxUpPts =;*/ + + pusch_p0_Nominal = -90; + pusch_alpha = "AL1"; + pucch_p0_Nominal = -96; + msg3_delta_Preamble = 6; + pucch_deltaF_Format1 = "deltaF2"; + pucch_deltaF_Format1b = "deltaF3"; + pucch_deltaF_Format2 = "deltaF0"; + pucch_deltaF_Format2a = "deltaF0"; + pucch_deltaF_Format2b = "deltaF0"; + + rach_numberOfRA_Preambles = 64; + rach_preamblesGroupAConfig = "DISABLE"; + /* + rach_sizeOfRA_PreamblesGroupA = ; + rach_messageSizeGroupA = ; + rach_messagePowerOffsetGroupB = ; + */ + rach_powerRampingStep = 4; + rach_preambleInitialReceivedTargetPower = -108; + rach_preambleTransMax = 10; + rach_raResponseWindowSize = 10; + rach_macContentionResolutionTimer = 48; + rach_maxHARQ_Msg3Tx = 4; + + pcch_default_PagingCycle = 128; + pcch_nB = "oneT"; + bcch_modificationPeriodCoeff = 2; + ue_TimersAndConstants_t300 = 1000; + ue_TimersAndConstants_t301 = 1000; + ue_TimersAndConstants_t310 = 1000; + ue_TimersAndConstants_t311 = 10000; + ue_TimersAndConstants_n310 = 20; + ue_TimersAndConstants_n311 = 1; + + } + ); + + + srb1_parameters : + { + # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500] + timer_poll_retransmit = 80; + + # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200] + timer_reordering = 35; + + # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500] + timer_status_prohibit = 0; + + # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)] + poll_pdu = 4; + + # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)] + poll_byte = 99999; + + # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32] + max_retx_threshold = 4; + } + + # ------- SCTP definitions + SCTP : + { + # Number of streams to use in input/output + SCTP_INSTREAMS = 2; + SCTP_OUTSTREAMS = 2; + }; + + + ////////// MME parameters: + mme_ip_address = ( { ipv4 = "192.168.12.62"; + ipv6 = "192:168:30::17"; + active = "yes"; + preference = "ipv4"; + } + ); + + NETWORK_INTERFACES : + { + ENB_INTERFACE_NAME_FOR_S1_MME = "eth4"; + ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.242/24"; + + ENB_INTERFACE_NAME_FOR_S1U = "eth4"; + ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.242/24"; + ENB_PORT_FOR_S1U = 2152; # Spec 2152 + }; + + log_config : + { + global_log_level ="info"; + global_log_verbosity ="medium"; + hw_log_level ="info"; + hw_log_verbosity ="medium"; + phy_log_level ="info"; + phy_log_verbosity ="medium"; + mac_log_level ="info"; + mac_log_verbosity ="high"; + rlc_log_level ="info"; + rlc_log_verbosity ="medium"; + pdcp_log_level ="info"; + pdcp_log_verbosity ="medium"; + rrc_log_level ="info"; + rrc_log_verbosity ="medium"; + }; + } +); diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.lmssdr.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.lmssdr.conf index e001bd12e9..dae0187f18 100644 --- a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.lmssdr.conf +++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.lmssdr.conf @@ -17,7 +17,7 @@ eNBs = mobile_country_code = "208"; - mobile_network_code = "93"; + mobile_network_code = "95"; ////////// Physical parameters: @@ -132,7 +132,7 @@ eNBs = }; ////////// MME parameters: - mme_ip_address = ( { ipv4 = "192.168.12.171"; + mme_ip_address = ( { ipv4 = "192.168.12.62"; ipv6 = "192:168:30::17"; active = "yes"; preference = "ipv4"; From 1740b0c517592047d004e42276de24ad77af5f6d Mon Sep 17 00:00:00 2001 From: Ubuntu Date: Sun, 21 Feb 2016 14:25:13 +0000 Subject: [PATCH 49/55] USRP Band 13 --- .../CONF/enb.band13.tm1.usrpb210.conf | 22 +++++++++---------- .../CONF/enb.band7.tm1.usrpb210.conf | 10 ++++----- 2 files changed, 16 insertions(+), 16 deletions(-) diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band13.tm1.usrpb210.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band13.tm1.usrpb210.conf index 69d8536217..f1cd67b196 100644 --- a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band13.tm1.usrpb210.conf +++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band13.tm1.usrpb210.conf @@ -27,16 +27,16 @@ eNBs = tdd_config = 3; tdd_config_s = 0; prefix_type = "NORMAL"; - eutra_band = 13; - downlink_frequency = 751000000L; - uplink_frequency_offset = 31000000; + eutra_band = 7; + downlink_frequency = 2685000000L; + uplink_frequency_offset = -120000000; Nid_cell = 0; N_RB_DL = 25; Nid_cell_mbsfn = 0; nb_antennas_tx = 1; nb_antennas_rx = 1; tx_gain = 90; - rx_gain = 100; + rx_gain = 125; prach_root = 0; prach_config_index = 0; prach_high_speed = "DISABLE"; @@ -46,7 +46,7 @@ eNBs = pucch_nRB_CQI = 1; pucch_nCS_AN = 0; pucch_n1_AN = 32; - pdsch_referenceSignalPower = -15; + pdsch_referenceSignalPower = -29; pdsch_p_b = 0; pusch_n_SB = 1; pusch_enable64QAM = "DISABLE"; @@ -64,7 +64,7 @@ eNBs = srs_ackNackST =; srs_MaxUpPts =;*/ - pusch_p0_Nominal = -86; + pusch_p0_Nominal = -90; pusch_alpha = "AL1"; pucch_p0_Nominal = -96; msg3_delta_Preamble = 6; @@ -133,7 +133,7 @@ eNBs = ////////// MME parameters: - mme_ip_address = ( { ipv4 = "192.168.12.62"; + mme_ip_address = ( { ipv4 = "172.27.8.52"; ipv6 = "192:168:30::17"; active = "yes"; preference = "ipv4"; @@ -142,11 +142,11 @@ eNBs = NETWORK_INTERFACES : { - ENB_INTERFACE_NAME_FOR_S1_MME = "eth4"; - ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.242/24"; + ENB_INTERFACE_NAME_FOR_S1_MME = "eth0"; + ENB_IPV4_ADDRESS_FOR_S1_MME = "172.27.8.51/23"; - ENB_INTERFACE_NAME_FOR_S1U = "eth4"; - ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.242/24"; + ENB_INTERFACE_NAME_FOR_S1U = "eth0"; + ENB_IPV4_ADDRESS_FOR_S1U = "172.27.8.51/23"; ENB_PORT_FOR_S1U = 2152; # Spec 2152 }; diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf index 4a9113282f..f1cd67b196 100644 --- a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf +++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf @@ -17,7 +17,7 @@ eNBs = mobile_country_code = "208"; - mobile_network_code = "93"; + mobile_network_code = "95"; ////////// Physical parameters: @@ -28,7 +28,7 @@ eNBs = tdd_config_s = 0; prefix_type = "NORMAL"; eutra_band = 7; - downlink_frequency = 2660000000L; + downlink_frequency = 2685000000L; uplink_frequency_offset = -120000000; Nid_cell = 0; N_RB_DL = 25; @@ -133,7 +133,7 @@ eNBs = ////////// MME parameters: - mme_ip_address = ( { ipv4 = "192.168.12.11"; + mme_ip_address = ( { ipv4 = "172.27.8.52"; ipv6 = "192:168:30::17"; active = "yes"; preference = "ipv4"; @@ -143,10 +143,10 @@ eNBs = NETWORK_INTERFACES : { ENB_INTERFACE_NAME_FOR_S1_MME = "eth0"; - ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.212/24"; + ENB_IPV4_ADDRESS_FOR_S1_MME = "172.27.8.51/23"; ENB_INTERFACE_NAME_FOR_S1U = "eth0"; - ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.212/24"; + ENB_IPV4_ADDRESS_FOR_S1U = "172.27.8.51/23"; ENB_PORT_FOR_S1U = 2152; # Spec 2152 }; From 5f3961556d68c0512d155cd4ed196f2b2dbb2d96 Mon Sep 17 00:00:00 2001 From: Rohit Gupta Date: Sun, 21 Feb 2016 19:25:30 +0100 Subject: [PATCH 50/55] Update eNB config USRP for band 13 --- .../CONF/enb.band13.tm1.usrpb210.conf | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band13.tm1.usrpb210.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band13.tm1.usrpb210.conf index f1cd67b196..1bf3c6fbf2 100644 --- a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band13.tm1.usrpb210.conf +++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band13.tm1.usrpb210.conf @@ -27,16 +27,16 @@ eNBs = tdd_config = 3; tdd_config_s = 0; prefix_type = "NORMAL"; - eutra_band = 7; - downlink_frequency = 2685000000L; - uplink_frequency_offset = -120000000; + eutra_band = 13; + downlink_frequency = 751000000L; + uplink_frequency_offset = 31000000; Nid_cell = 0; - N_RB_DL = 25; + N_RB_DL = 50; Nid_cell_mbsfn = 0; nb_antennas_tx = 1; nb_antennas_rx = 1; tx_gain = 90; - rx_gain = 125; + rx_gain = 110; prach_root = 0; prach_config_index = 0; prach_high_speed = "DISABLE"; @@ -46,7 +46,7 @@ eNBs = pucch_nRB_CQI = 1; pucch_nCS_AN = 0; pucch_n1_AN = 32; - pdsch_referenceSignalPower = -29; + pdsch_referenceSignalPower = -15; pdsch_p_b = 0; pusch_n_SB = 1; pusch_enable64QAM = "DISABLE"; @@ -82,7 +82,7 @@ eNBs = rach_messagePowerOffsetGroupB = ; */ rach_powerRampingStep = 4; - rach_preambleInitialReceivedTargetPower = -108; + rach_preambleInitialReceivedTargetPower = -100; rach_preambleTransMax = 10; rach_raResponseWindowSize = 10; rach_macContentionResolutionTimer = 48; @@ -168,4 +168,4 @@ eNBs = rrc_log_verbosity ="medium"; }; } -); +); \ No newline at end of file From 1473a3a65242f2e610fedcbaf9d458bb00ef2608 Mon Sep 17 00:00:00 2001 From: Raymond Knopp Date: Thu, 25 Feb 2016 14:22:56 -0800 Subject: [PATCH 51/55] applying hotfix for UE exit on DLSCH error to develop --- openair1/SCHED/phy_procedures_lte_ue.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/openair1/SCHED/phy_procedures_lte_ue.c b/openair1/SCHED/phy_procedures_lte_ue.c index c746fe7254..afaecb7075 100755 --- a/openair1/SCHED/phy_procedures_lte_ue.c +++ b/openair1/SCHED/phy_procedures_lte_ue.c @@ -2678,18 +2678,18 @@ int phy_procedures_UE_RX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstrac if (ret == (1+phy_vars_ue->dlsch_ue[eNB_id][0]->max_turbo_iterations)) { phy_vars_ue->dlsch_errors[eNB_id]++; - //#ifdef DEBUG_PHY_PROC +#ifdef DEBUG_PHY_PROC LOG_D(PHY,"[UE %d][PDSCH %x/%d] Frame %d subframe %d DLSCH in error (rv %d,mcs %d,TBS %d)\n", phy_vars_ue->Mod_id,phy_vars_ue->dlsch_ue[eNB_id][0]->rnti, harq_pid,frame_rx,subframe_prev, phy_vars_ue->dlsch_ue[eNB_id][0]->harq_processes[harq_pid]->rvidx, phy_vars_ue->dlsch_ue[eNB_id][0]->harq_processes[harq_pid]->mcs, phy_vars_ue->dlsch_ue[eNB_id][0]->harq_processes[harq_pid]->TBS); - - // if (abstraction_flag ==0 ) - dump_dlsch(phy_vars_ue,eNB_id,subframe_prev,harq_pid); - mac_xface->macphy_exit(""); - //#endif +/* + if (abstraction_flag ==0 ) + dump_dlsch(phy_vars_ue,eNB_id,subframe_prev,harq_pid); + mac_xface->macphy_exit(""); */ +#endif } else { LOG_D(PHY,"[UE %d][PDSCH %x/%d] Frame %d subframe %d (slot_rx %d): Received DLSCH (rv %d,mcs %d,TBS %d)\n", phy_vars_ue->Mod_id,phy_vars_ue->dlsch_ue[eNB_id][0]->rnti, From 5d62584c9f587f5f1d3f5d923e3c38cf00d29bb4 Mon Sep 17 00:00:00 2001 From: Cedric Roux Date: Mon, 29 Feb 2016 12:08:11 +0100 Subject: [PATCH 52/55] quickfix of prach_zero_correlation parameter range check in openair2/ENB_APP/enb_config.c it was tested against 63, it should be tested against 15 no impact on processing whatsoever so no need to test --- openair2/ENB_APP/enb_config.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/openair2/ENB_APP/enb_config.c b/openair2/ENB_APP/enb_config.c index 4c532285f2..107ca724fc 100755 --- a/openair2/ENB_APP/enb_config.c +++ b/openair2/ENB_APP/enb_config.c @@ -1019,7 +1019,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP) enb_properties.properties[enb_properties_index]->prach_zero_correlation[j] =prach_zero_correlation; - if ((prach_zero_correlation <0) || (prach_zero_correlation > 63)) + if ((prach_zero_correlation <0) || (prach_zero_correlation > 15)) AssertError (0, parse_errors ++, "Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for prach_zero_correlation choice: 0..15!\n", lib_config_file_name_pP, i, prach_zero_correlation); From 9764c9247c2949aba1c948c0200011b42c0ac28c Mon Sep 17 00:00:00 2001 From: Navid Nikaein Date: Mon, 29 Feb 2016 21:40:49 +0100 Subject: [PATCH 53/55] update trx_bladerf_write calls to match the common_lib.h trx_write_func --- .../ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.c | 37 +++++++++---------- 1 file changed, 18 insertions(+), 19 deletions(-) diff --git a/targets/ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.c b/targets/ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.c index 2f73d6978c..065b0bbad2 100644 --- a/targets/ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.c +++ b/targets/ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.c @@ -412,7 +412,7 @@ void calibrate_rf(openair0_device *device) { bladerf_set_correction(brf->dev,BLADERF_MODULE_TX,BLADERF_CORR_LMS_DCOFF_I,offIold); for (i=0;i<10;i++) { trx_brf_read(device, &ptimestamp, (void **)&calib_buffp, RXDCLENGTH, 0); - trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0); + trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0, 0); } for (meanIold=meanQold=i=j=0;idev,BLADERF_MODULE_TX,BLADERF_CORR_LMS_DCOFF_I,offI); for (i=0;i<10;i++) { trx_brf_read(device, &ptimestamp, (void **)&calib_buffp, RXDCLENGTH, 0); - trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0); + trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0, 0); } for (meanI=meanQ=i=j=0;idev,BLADERF_MODULE_TX,BLADERF_CORR_LMS_DCOFF_Q,offQold); for (i=0;i<10;i++) { trx_brf_read(device, &ptimestamp, (void **)&calib_buffp, RXDCLENGTH, 0); - trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0); + trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0, 0); } // project on fs/4 for (meanIold=meanQold=i=j=0;idev,BLADERF_MODULE_TX,BLADERF_CORR_LMS_DCOFF_Q,offQ); for (i=0;i<10;i++) { trx_brf_read(device, &ptimestamp, (void **)&calib_buffp, RXDCLENGTH, 0); - trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0); + trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0, 0); } for (meanI=meanQ=i=j=0;idev,BLADERF_MODULE_TX,BLADERF_CORR_FPGA_PHASE,offphaseold); for (i=0;i<10;i++) { trx_brf_read(device, &ptimestamp, (void **)&calib_buffp, RXDCLENGTH, 0); - trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0); + trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0, 0); } // project on fs/8 (Image of TX signal in +ve frequencies) for (meanIold=meanQold=i=j=0;idev,BLADERF_MODULE_TX,BLADERF_CORR_FPGA_PHASE,offphase); for (i=0;i<10;i++) { trx_brf_read(device, &ptimestamp, (void **)&calib_buffp, RXDCLENGTH, 0); - trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0); + trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0, 0); } // project on fs/8 (Image of TX signal in +ve frequencies) for (meanI=meanQ=i=j=0;idev,BLADERF_MODULE_TX,BLADERF_CORR_FPGA_GAIN,offgainold); for (i=0;i<10;i++) { trx_brf_read(device, &ptimestamp, (void **)&calib_buffp, RXDCLENGTH, 0); - trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0); + trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0, 0); } // project on fs/8 (Image of TX signal in +ve frequencies) for (meanIold=meanQold=i=j=0;idev,BLADERF_MODULE_TX,BLADERF_CORR_FPGA_GAIN,offgain); for (i=0;i<10;i++) { trx_brf_read(device, &ptimestamp, (void **)&calib_buffp, RXDCLENGTH, 0); - trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0); + trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0, 0); } // project on fs/8 (Image of TX signal in +ve frequencies) for (meanI=meanQ=i=j=0;idev,BLADERF_MODULE_RX,BLADERF_CORR_FPGA_PHASE,offphaseold); for (i=0;i<10;i++) { trx_brf_read(device, &ptimestamp, (void **)&calib_buffp, RXDCLENGTH, 0); - trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0); + trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0, 0); } // project on -3fs/8 (Image of TX signal in -ve frequencies) for (meanIold=meanQold=i=j=0;idev,BLADERF_MODULE_RX,BLADERF_CORR_FPGA_PHASE,offphase); for (i=0;i<10;i++) { trx_brf_read(device, &ptimestamp, (void **)&calib_buffp, RXDCLENGTH, 0); - trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0); + trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0, 0); } // project on -3fs/8 (Image of TX signal in -ve frequencies) for (meanI=meanQ=i=j=0;idev,BLADERF_MODULE_RX,BLADERF_CORR_FPGA_GAIN,offgainold); for (i=0;i<10;i++) { trx_brf_read(device, &ptimestamp, (void **)&calib_buffp, RXDCLENGTH, 0); - trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0); + trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0,0); } // project on -3fs/8 (Image of TX signal in +ve frequencies) for (meanIold=meanQold=i=j=0;idev,BLADERF_MODULE_RX,BLADERF_CORR_FPGA_GAIN,offgain); for (i=0;i<10;i++) { trx_brf_read(device, &ptimestamp, (void **)&calib_buffp, RXDCLENGTH, 0); - trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0); + trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0, 0); } // project on 3fs/8 (Image of TX signal in -ve frequencies) for (meanI=meanQ=i=j=0;ilog_level)); printf("BLADERF: Initializing openair0_device\n"); - device->priv = brf; device->Mod_id = num_devices++; device->type = BLADERF_DEV; device->trx_start_func = trx_brf_start; From 75602a1267b6dda67fe9dfb574f912d4992a37c2 Mon Sep 17 00:00:00 2001 From: Navid Nikaein Date: Mon, 29 Feb 2016 21:45:30 +0100 Subject: [PATCH 54/55] correct tx_shift paremeter in config files for rrh and usrp --- .../CONF/enb.band7.tm1.50PRB.rrh.usrpb210.conf | 4 +--- .../CONF/enb.band7.tm1.rrh.usrpb210.conf | 13 ++++++------- 2 files changed, 7 insertions(+), 10 deletions(-) diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.rrh.usrpb210.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.rrh.usrpb210.conf index 604f5567ef..004af14749 100644 --- a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.rrh.usrpb210.conf +++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.rrh.usrpb210.conf @@ -150,7 +150,7 @@ rrh_gw_config = ( rrh_gw_active = "yes"; tr_preference = "raw"; rf_preference = "usrp_b200"; - iq_txshift = 5; + iq_txshift = 4; tx_sample_advance = 113; tx_scheduling_advance = 9; @@ -163,8 +163,6 @@ rrh_gw_config = ( ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.111/24"; ENB_INTERFACE_NAME_FOR_S1U = "eth4"; - - ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.111/24"; ENB_PORT_FOR_S1U = 2152; # Spec 2152 }; diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf index 33db53740c..37880a2906 100644 --- a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf +++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf @@ -133,7 +133,7 @@ eNBs = ////////// MME parameters: - mme_ip_address = ( { ipv4 = "192.168.12.26"; + mme_ip_address = ( { ipv4 = "192.168.12.170"; ipv6 = "192:168:30::17"; active = "yes"; preference = "ipv4"; @@ -145,14 +145,14 @@ rrh_gw_config = ( local_if_name = "eth0"; #remote_address = "169.254.10.158"; #local_address = "169.254.8.15"; - remote_address = "74:d4:35:cc:88:45"; - local_address = "98:90:96:df:66:07"; + remote_address = "74:d4:35:cc:88:e3"; + local_address = "74:d4:35:cc:88:d1"; local_port = 50000; #for raw option local port must be the same to remote remote_port = 50000; rrh_gw_active = "yes"; tr_preference = "raw"; rf_preference = "usrp_b200"; - iq_txshift = 5; + iq_txshift = 4; tx_sample_advance = 70; tx_scheduling_advance = 9; @@ -162,12 +162,11 @@ rrh_gw_config = ( NETWORK_INTERFACES : { ENB_INTERFACE_NAME_FOR_S1_MME = "eth4"; - ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.111/24"; + ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.240/24"; ENB_INTERFACE_NAME_FOR_S1U = "eth4"; - - ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.111/24"; + ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.240/24"; ENB_PORT_FOR_S1U = 2152; # Spec 2152 }; From 9ccc1999bffe17593f7afd5053f7b64ca5f22d97 Mon Sep 17 00:00:00 2001 From: Florian Kaltenberger Date: Tue, 1 Mar 2016 16:55:25 +0100 Subject: [PATCH 55/55] removing old unused files --- targets/RT/USER/dot11.c | 1275 ------------------------ targets/RT/USER/ieee80211p-softmodem.c | 185 ---- 2 files changed, 1460 deletions(-) delete mode 100644 targets/RT/USER/dot11.c delete mode 100644 targets/RT/USER/ieee80211p-softmodem.c diff --git a/targets/RT/USER/dot11.c b/targets/RT/USER/dot11.c deleted file mode 100644 index 00e535a21d..0000000000 --- a/targets/RT/USER/dot11.c +++ /dev/null @@ -1,1275 +0,0 @@ -/******************************************************************************* - - Eurecom OpenAirInterface - Copyright(c) 1999 - 2011 Eurecom - - This program is free software; you can redistribute it and/or modify it - under the terms and conditions of the GNU General Public License, - version 2, as published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - more details. - - You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - - The full GNU General Public License is included in this distribution in - the file called "COPYING". - - Contact Information - Openair Admin: openair_admin@eurecom.fr - Openair Tech : openair_tech@eurecom.fr - Forums : http://forums.eurecom.fsr/openairinterface - Address : Eurecom, 2229, route des crêtes, 06560 Valbonne Sophia Antipolis, France - -*******************************************************************************/ - -<<<<<<< .mine -/*! \file dot11.c -* \brief main program to control HW and scheduling for openairITS dot11 MODEM -* \author R. Knopp, F. Kaltenberger -* \date 2012 -* \version 0.1 -* \company Eurecom -* \email: knopp@eurecom.fr,florian.kaltenberger@eurecom.fr -* \note -* \warning -*/ -======= - /*! \file dot11.c - * \brief main program to control HW and scheduling for openairITS dot11 MODEM - * \author R. Knopp, F. Kaltenberger - * \date 2012 - * \version 0.1 - * \company Eurecom - * \email: knopp@eurecom.fr,florian.kaltenberger@eurecom.fr - * \note - * \warning - */ - >>>>>>> .r3153 -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include "PHY/types.h" -#include "PHY/defs.h" - -#include "ARCH/COMMON/defs.h" -#include "ARCH/CBMIMO1/DEVICE_DRIVER/cbmimo1_device.h" -#include "ARCH/CBMIMO1/DEVICE_DRIVER/cbmimo1_pci.h" -#include "SIMULATION/LTE_PHY/openair_hw.h" - -#include "ARCH/CBMIMO1/DEVICE_DRIVER/vars.h" -#include "SCHED/defs.h" -#include "SCHED/vars.h" - - - <<<<<<< .mine -#include "phy/DOT11/defs.h" -#include "phy/DOT11/commonvars.h" -#include - ======= -#include "phy/DOT11/defs.h" -#include "phy/DOT11/commonvars.h" -#include "PHY/TOOLS/defs.h" - >>>>>>> .r3153 - - <<<<<<< .mine - ======= -#include - >>>>>>> .r3153 - - <<<<<<< .mine -#include "UTIL/LOG/log.h" - ======= - >>>>>>> .r3153 - - <<<<<<< .mine -#define FRAME_LENGTH_SAMPLES_MAX 100000 - - uint16_t rev64[64]; - -int generate_test_tx=0; - - - - -======= -#include "UTIL/LOG/log.h" -#include "ieee80211p-netlinkapi.h" - -#define FRAME_LENGTH_SAMPLES_MAX 100000 - - uint16_t rev64[64]; - -int generate_test_tx=0; - - - - ->>>>>>> .r3153 -#define FRAME_PERIOD 100000000ULL -#define DAQ_PERIOD 66666ULL - - -#undef MALLOC //there are two conflicting definitions, so we better make sure we don't use it at all -enum nl80211_band { - NL80211_BAND_2GHZ, - NL80211_BAND_5GHZ, - NL80211_BAND_5_9GHZ, - NL80211_BAND_0_8GHZ, -}; - -<<<<<<< .mine - -======= - enum ieee80211_band { - IEEE80211_BAND_2GHZ = NL80211_BAND_2GHZ, - IEEE80211_BAND_5GHZ = NL80211_BAND_5GHZ, - IEEE80211_BAND_5_9GHZ = NL80211_BAND_5_9GHZ, - IEEE80211_BAND_0_8GHZ = NL80211_BAND_0_8GHZ, - }; - -struct ieee80211p_rx_status { - short data_len; //frame data length in bytes - char rssi; //received power in dBm - char rate; //reveived data rate in units of 100 kbps - enum ieee80211_band band; - char flags; //RX flags -}; /* struct ieee80211p_rx_status */ - - ->>>>>>> .r3153 -//static CND *cond; - -static int thread1; -static int thread2; - -static int sync_thread; - - -static int instance_cnt=-1; //0 means worker is busy, -1 means its free -int instance_cnt_ptr_kern,*instance_cnt_ptr_user; -int pci_interface_ptr_kern; - -extern unsigned int bigphys_top; -extern unsigned int mem_base; - -int openair_fd = 0; - -int oai_exit = 0; - -//PCI_interface_t *pci_interface[3]; - -unsigned int *DAQ_MBOX; - -unsigned int time_offset[4] = {0,0,0,0}; - -int fs4_test=0; -char UE_flag=0; - -struct timing_info_t { - unsigned int frame, hw_slot, last_slot, next_slot; - RTIME time0, time1, time2; - unsigned int mbox0, mbox1, mbox2, mbox_target; -} timing_info[20]; - -extern s16* sync_corr_ue0; -extern s16 prach_ifft[4][1024*2]; - -typedef enum {normal_txrx=0,rx_calib_ue=1,rx_calib_ue_med=2,rx_calib_ue_byp=3} runmode_t; - -runmode_t mode; -int rx_input_level_dBm; - - -int otg_enabled = 0; - -TX_RX_VARS dummy_tx_rx_vars; -unsigned int bigphys_top; -unsigned int mem_base; - -<<<<<<< .mine -uint32_t *txdata[2],*rxdata[2]; - -uint8_t *data_ind = NULL; - -extern int dot11_netlink_init(); -extern void *rx_thread(void *); -extern void *tx_thread(void *); - - -void dot11_init() -{ - - - - set_taus_seed(0); - - // Basic initializations - init_fft(64,6,rev64); - init_interleavers(); - ccodedot11_init(); - ccodedot11_init_inv(); - phy_generate_viterbi_tables(); - - init_crc32(); - -} -======= - uint32_t *txdata[2],*rxdata[2]; ->>>>>>> .r3153 - -<<<<<<< .mine -void generate_test_tx_signal() -{ - ======= - uint8_t *data_ind = NULL; - >>>>>>> .r3153 - - <<<<<<< .mine - TX_VECTOR_t tx_vector; - int i; - - if (data_ind == NULL) { - data_ind = (uint8_t*)malloc(4095+2+1); - data_ind[0] = 0; - data_ind[1] = 0; - } - - - tx_vector.rate=1; - tx_vector.sdu_length=512; - tx_vector.service=0; - - for (i=0; i>>>>>> .r3153 - - extern int32_t rxDATA_F_comp_aggreg3[48*1024]; - extern int32_t rxDATA_F_comp_aggreg2[48*1024]; - -#define FRAME_LENGTH_SAMPLES 76800 -#define RX_THRES 60 - -#define SLOT_DURATION_5MHz 105 -#define RX_THRES_dB 300 - - u32 rxgain[4]= {30,30,30,30}; - unsigned int rxg_max[4]= {133,133,133,133}, rxg_med[4]= {127,127,127,127}, rxg_byp[4]= {120,120,120,120}; - - extern int tx_sdu_active; - extern int tx_sdu_length; - extern char rxsdu[2000]; - int n; - - static void *rx_thread(void *arg) { - - int fd = *((int*)arg); - int rx_offset; - RX_VECTOR_t *rxv; - uint8_t *data_ind_rx; - int i; - struct ieee80211p_rx_status *rs; - int ret,frame; - RT_TASK *task; - int16_t rx_energy; - int initial_sample_offset = 0,off=0; - int dlen,dlen_symb; - int mbox_off = 0,old_mbox,mbox_diff; - int rt_skip_cond; - int pos_crc=0,neg_crc=0; - int sdu_received; - int sample_threshold; - int log2_maxh; - struct sched_param mysched; - int skip=0; - int txlen; - - /* mysched.sched_priority = 99; - - sched_setscheduler( 0, SCHED_FIFO, &mysched); - */ - char dummy_data[16]; - - - if (fd>0) { - printf("rx_thread starting, fd %d\n",fd); - - data_ind_rx = (uint8_t*)malloc(4095+2+1+12); - - task = rt_task_init_schmod(nam2num("TASK0"), 0, 0, 0, SCHED_FIFO, 0xF); - mlockall(MCL_CURRENT | MCL_FUTURE); - - // rt_make_hard_real_time(); - - - // printf("Started rx_thread ... MBOX %d\n",((unsigned int *)DAQ_MBOX)[0]); - // wait until MBOX gets around to zero - i=0; - - while (((volatile unsigned int *)DAQ_MBOX)[0] != 0) { - rt_sleep(nano2count(10000)); - - if (i>1000) { - printf("HW not counting,exiting rx_thread\n"); - return(0); - } - } - - // printf("Got first MBOX = 0\n"); - // wait for first 120us - while (((unsigned int *)DAQ_MBOX)[0] < 2) - rt_sleep(nano2count(2*66666)); - - old_mbox = ((unsigned int *)DAQ_MBOX)[0]; - - // printf("MBOX = %d\n",((unsigned int *)DAQ_MBOX)[0]); - i = 0; - frame = 0; - // oai_exit=1; - rt_skip_cond=0; - - while (!oai_exit) { - - // printf("While in ... mbox %d\n",((unsigned int *)DAQ_MBOX)[0]); - - rx_energy = dB_fixed_times10(signal_energy((int32_t*)(rxdata[0]+(initial_sample_offset&(~0x1))), - SLOT_DURATION_5MHz - (SLOT_DURATION_5MHz&1))); - - sdu_received = 0; - - if (rx_energy>RX_THRES_dB) { - if (initial_sample_offset < SLOT_DURATION_5MHz) - off = initial_sample_offset + FRAME_LENGTH_SAMPLES - SLOT_DURATION_5MHz; - else - off = initial_sample_offset - SLOT_DURATION_5MHz; - - if (((dot11_state = initial_sync(&rxv, - &rx_offset, - &log2_maxh, - rxdata[0], - FRAME_LENGTH_SAMPLES, - off, - 1)) == BUSY)) { - - - //if ((frame % 100) == 0) - // printf("Channel is busy, rxv %p, offset %d\n",(void*)rxv,rx_offset); - - if (rxv) { - rx_energy = dB_fixed_times10(signal_energy((int32_t*)(rxdata[0]+rx_offset), - 80)); - // if ((frame%100) == 0) - printf("Frame %d: Rate %d, SDU_LENGTH %d,rx_offset %d,log2_maxh %d, rxp %f dBm (dig %f,rxgain %d)\n", - frame,rxv->rate,rxv->sdu_length,rx_offset,log2_maxh,(rx_energy/10.0)-rxg_max[0]+30-rxgain[0], - rx_energy/10.0,rxg_max[0]-30+rxgain[0]); - - if ((rxv->sdu_length > 1500) || (rxv->rate > 3) ) - printf("ERROR: Frame %d: Rate %d, SDU_LENGTH %d,rx_offset %d,log2_maxh %d, rxp %f dBm (dig %f,rxgain %d)\n", - frame,rxv->rate,rxv->sdu_length,rx_offset,log2_maxh,(rx_energy/10.0)-rxg_max[0]+30-rxgain[0], - rx_energy/10.0,rxg_max[0]-30+rxgain[0]); - else { - memset((void*)&data_ind_rx[10],0,rxv->sdu_length+4+2+1+16); - - <<<<<<< .mine - ======= - - if (data_detection(rxv,&data_ind_rx[10], - (uint32_t*)rxdata[0], - 76800,rx_offset,log2_maxh,NULL)) { - pos_crc++; - printf("Received SDU with positive CRC\n"); - - if (fd) { - rs = (struct ieee80211p_rx_status *)&data_ind_rx[0]; - rs->data_len = rxv->sdu_length; - rs->rssi = (char)((rx_energy/10.0)-rxg_max[0]+30-rxgain[0]); - rs->rate = 60; - rs->band = IEEE80211_BAND_0_8GHZ; - rs->flags = 0; - ret = netlink_send(fd,NLCMD_DATA,128,&data_ind_rx[0]); - } - - } else { - neg_crc++; - printf("Received SDU with negative CRC\n"); - oai_exit=1; - write_output("rxDATA_F_comp_aggreg3.m","rxDAT_F_comp_aggreg3", rxDATA_F_comp_aggreg3,48*200,1,1); - write_output("rxsig_sdu.m","rxsig_sdu",&rxdata[0][rx_offset],80*40,1,1); - - // write_output("rxDATA_F_comp_aggreg2.m","rxDAT_F_comp_aggreg2", rxDATA_F_comp_aggreg2,48*200,1,1); - } - - sdu_received = 1; - - // oai_exit = 1; - dlen = 32+16+6+(rxv->sdu_length<<3); // data length is 32-bits CRC + sdu + 16 service + 6 tail - dlen_symb = dlen/Ndbps[rxv->rate]; - - if ((dlen%Ndbps[rxv->rate])>0) - dlen_symb++; - - // printf("after dd: initial_sample_offset %d =>",initial_sample_offset); - initial_sample_offset = rx_offset + (80*dlen_symb); - // printf("%d\n",initial_sample_offset); - } - } else { - printf("BUSY, no synch (off %d) Frame %d (%llu us): rxp %f dBm (dig %f,rxgain %d)\n", - off,frame,rt_get_time_ns()/1000,(rx_energy/10.0)-rxg_max[0]+30-rxgain[0], - rx_energy/10.0,rxg_max[0]-30+rxgain[0]); - } - } else { - /* printf("Frame %d (%llu us): rxp %d dBm (dig %d,rxgain %d)\n", - frame,rt_get_time_ns()/1000,rx_energy-rxg_max[0]+30-rxgain[0], - rx_energy,rxg_max[0]-30+rxgain[0]); - */ - } - - } else { - - if (((frame%100) == 0) && (initial_sample_offset < 2*SLOT_DURATION_5MHz)) { - printf("Frame %d (%llu us): rxp %f dBm (dig %f,rxgain %d)\n", - frame,rt_get_time_ns()/1000,(rx_energy/10.0)-rxg_max[0]+30-rxgain[0], - rx_energy/10.0,rxg_max[0]-30+rxgain[0]); - - } - - if ((frame > 100) && - (tx_sdu_active == 1) && - (initial_sample_offset < 60000)) { - - printf("Frame %d: Generating SDU of length %d (%p), initial_sample_offset %d, MBOX <<9 %d\n",frame,tx_sdu_length,rxsdu,initial_sample_offset,DAQ_MBOX[0]<<9); /* - for (n=0;n FRAME_LENGTH_SAMPLES) - initial_sample_offset -= FRAME_LENGTH_SAMPLES; - - - - txlen= generate_tx_signal(initial_sample_offset); - // wait until TX is finished - - printf("TX: txlen %d, initial_sample_offset %d\n",txlen,initial_sample_offset); - //oai_exit=1; - - rt_sleep(nano2count((66666*8)+((txlen*66666)>>9))); - skip = initial_sample_offset+txlen-FRAME_LENGTH_SAMPLES; - - if (skip < 0) - skip = 0; - - printf("TX: erasing signal, MBOX %d (%d)\n",DAQ_MBOX[0],DAQ_MBOX[0]<<9); - - // erase TX signal - for (i=0; i<(txlen-skip); i++) - txdata[0][initial_sample_offset+i] = 0x00010001; - - for (i=0; i FRAME_LENGTH_SAMPLES) { - initial_sample_offset -= FRAME_LENGTH_SAMPLES; - frame++; - mbox_off = 0; - } - - tx_sdu_active = 0; - old_mbox = DAQ_MBOX[0]; - - } - - - //rt_sleep(nano2count(10000)); - // printf("back from sleep 10000 ... mbox %d\n",((unsigned int *)DAQ_MBOX)[0]); - - } - - - initial_sample_offset+=SLOT_DURATION_5MHz; - - if (initial_sample_offset>FRAME_LENGTH_SAMPLES) { - initial_sample_offset-=FRAME_LENGTH_SAMPLES; - mbox_off = 0; - frame++; - // if ((frame%100) == 0) - //printf("**** New frame %d\n",frame); - - if (frame == 100000) - oai_exit = 1; - } - - // sleep until HW has filled enough samples - - - mbox_diff = ((unsigned int*)DAQ_MBOX)[0]-old_mbox; - // if ((frame%100) == 0) - // printf("frame %d, old_mbox %d, mbox %d (initial_sample_offset %d : mbox<<9 %d)\n",frame,old_mbox,((unsigned int*)DAQ_MBOX)[0],initial_sample_offset,((unsigned int*)DAQ_MBOX)[0]<<9); - - - if ((mbox_diff>10) && (sdu_received == 0)) { - mbox_off = 0; - initial_sample_offset = ((unsigned int*)DAQ_MBOX)[0]<<9; - // printf("initial_sample_offset adjusted %d\n",initial_sample_offset); - rt_skip_cond++; - // printf("old_mbox %d, mbox %d (initial_sample_offset %d : mbox<<9 %d)\n", - // old_mbox,((unsigned int*)DAQ_MBOX)[0],initial_sample_offset,((unsigned int*)DAQ_MBOX)[0]<<9); - old_mbox = ((unsigned int *)DAQ_MBOX)[0]; - - } else { - if (old_mbox > ((unsigned int *)DAQ_MBOX)[0]) - mbox_off = 150; - - old_mbox = ((unsigned int *)DAQ_MBOX)[0]; - } - - /* - printf("off: %d (%d,%d), mbox_off %d => rx_energy %d\n",initial_sample_offset, - ((unsigned int *)DAQ_MBOX)[0], - (initial_sample_offset>>9),mbox_off, - rx_energy); - */ - - sample_threshold = initial_sample_offset+1024; - - if (sample_threshold > FRAME_LENGTH_SAMPLES) - sample_threshold -= FRAME_LENGTH_SAMPLES; - - while (old_mbox+mbox_off <= (sample_threshold>>9)) { - // if ((frame % 100) == 0) - // printf("sleeping (mbox %d, mbox_off %d, initial_sample_offset>>9 %d\n", - // old_mbox,mbox_off,(initial_sample_offset>>9)); - rt_sleep(nano2count(66666)); - - if (old_mbox > ((unsigned int *)DAQ_MBOX)[0]) - mbox_off = 150; - - old_mbox = ((unsigned int *)DAQ_MBOX)[0]; - } - - // printf("While out ... mbox %d\n",((unsigned int *)DAQ_MBOX)[0]); - - } - - printf("rt_skip_cond %d, frames %d, pos_crc %d, neg_crc %d\n", - rt_skip_cond,frame,pos_crc,neg_crc); - - printf("Dumping IS stats\n"); - print_is_stats(); - print_dd_stats(); - - write_output("rxsig0.m","rxs", rxdata[0],76800,1,1); - write_output("txsig0.m","txs", txdata[0],76800,1,1); - write_output("rxDATA_F_comp_aggreg3.m","rxDAT_F_comp_aggreg3", rxDATA_F_comp_aggreg3,48*200,1,1); - write_output("rxDATA_F_comp_aggreg2.m","rxDAT_F_comp_aggreg2", rxDATA_F_comp_aggreg2,48*200,1,1); - - printf("[DOT11][PHY] Leaving rx_thread\n"); - free(data_ind_rx); - } else { - printf("[DOT11][PHY] No netlink, exiting\n"); - } - - return(0); - - - } - - //extern int dot11_netlink_init(); - //extern int dot11_rx_thread_init(); - - //extern void *rx_thread(void *); - extern void *tx_thread(void *); - - - void dot11_init() { - - - - set_taus_seed(0); - - // Basic initializations - init_fft(64,6,rev64); - init_interleavers(); - ccodedot11_init(); - ccodedot11_init_inv(); - phy_generate_viterbi_tables(); - - init_crc32(); - - } - - int generate_tx_signal(int tx_offset) { - - TX_VECTOR_t tx_vector; - int i; - - printf("Generating Signal @ %d (MBOX << 9 = %d)\n", - tx_offset,DAQ_MBOX[0]<<9); - - if (data_ind == NULL) { - data_ind = (uint8_t*)malloc(4095+2+1); - data_ind[0] = 0; - data_ind[1] = 0; - } - - - tx_vector.rate=1; - tx_vector.sdu_length=tx_sdu_length; - tx_vector.service=0; - - for (i=0; i>>>>>> .r3153 - - // printf("Generating signal at %p\n",txdata[0]); - return(phy_tx_start(&tx_vector,txdata[0],tx_offset,FRAME_LENGTH_SAMPLES,data_ind)); - - } - - void signal_handler(int sig) { - void *array[10]; - size_t size; - - oai_exit=1; - - // get void*'s for all entries on the stack - size = backtrace(array, 10); - - // print out all the frames to stderr - fprintf(stderr, "Error: signal %d:\n", sig); - backtrace_symbols_fd(array, size, 2); - exit(-1); - } - - void exit_fun(const char* s) { - void *array[10]; - size_t size; - int fd; - - printf("Exiting: %s\n",s); - - oai_exit=1; - rt_sleep(nano2count(FRAME_PERIOD)); - - // cleanup - stop_rt_timer(); - - fd = 0; - ioctl(openair_fd,openair_STOP,&fd); - munmap((void*)mem_base, BIGPHYS_NUMPAGES*4096); - - exit (-1); - } - - int dummy_tx_buffer[3840*4] __attribute__((aligned(16))); - - /* This is the main dot11 thread. */ - static void *dot11_thread(void *arg) { - RT_TASK *task; - int slot=0,hw_slot,last_slot, next_slot,frame=0; - unsigned int msg1; - unsigned int aa,slot_offset, slot_offset_F; - int diff; - int delay_cnt; - RTIME time_in; - int mbox_target=0,mbox_current=0; - int i; - - task = rt_task_init_schmod(nam2num("TASK0"), 0, 0, 0, SCHED_FIFO, 0xF); - mlockall(MCL_CURRENT | MCL_FUTURE); - -#ifdef HARD_RT - <<<<<<< .mine - rt_printk("Started dot11 thread (id %p)\n",task); - - - rt_make_hard_real_time(); -#else - - printf("Started dot11 thread (id %p)\n",task); -#endif - ======= - rt_printk("Started dot11 thread (id %p)\n",task); - >>>>>>> .r3153 - - <<<<<<< .mine - - while (!oai_exit) { - // rt_printk("eNB: slot %d\n",slot); - ======= - >>>>>>> .r3153 - - <<<<<<< .mine - ======= - rt_make_hard_real_time(); -#else - >>>>>>> .r3153 - - printf("Started dot11 thread (id %p)\n",task); - - - <<<<<<< .mine - - if (frame>5) { - if ((frame%100)==0) -#ifdef HARD_RT - rt_printk("slot %d, hw_slot %d, next_slot %d (before): DAQ_MBOX %d\n", slot, hw_slot,next_slot,DAQ_MBOX[0]); - -#else - printf("frame %d slot %d, hw_slot %d, next_slot %d (before): DAQ_MBOX %d\n", frame,slot, hw_slot,next_slot,DAQ_MBOX[0]); -#endif - - if (fs4_test==0) { - if ((next_slot == 0) && (generate_test_tx==1) && ((frame%100)==0)) { - printf("Generating tx_signal in frame %d ...",frame); - generate_test_tx_signal(); - printf("done\n"); - - } else { // Check for normal TX packet - /*for (i=0;i<3840;i++) { - ((uint32_t *)txdata[0] + (3840*next_slot))[i] = 0x00010001; - }*/ - } - } - - - } - - - - ======= - - while (!oai_exit) { - // rt_printk("eNB: slot %d\n",slot); - - hw_slot = (((((unsigned int *)DAQ_MBOX)[0]+1)%150)<<1)/15; - //this is the mbox counter where we should be - mbox_target = ((((slot+1)%20)*15+1)>>1)%150; - //this is the mbox counter where we are - mbox_current = ((unsigned int *)DAQ_MBOX)[0]; - - //this is the time we need to sleep in order to synchronize with the hw (in multiples of DAQ_PERIOD) - if ((mbox_current>=135) && (mbox_target<15)) //handle the frame wrap-arround - diff = 150-mbox_current+mbox_target; - else if ((mbox_current<15) && (mbox_target>=135)) - diff = -150+mbox_target-mbox_current; - else - diff = mbox_target - mbox_current; - - if (diff < (-5)) { - printf("[dot11_thread] Frame %d: missed slot, proceeding with next one (slot %d, hw_slot %d, diff %d)\n",frame, slot, hw_slot, diff); - >>>>>>> .r3153 - slot++; - - if (slot==20) - <<<<<<< .mine - slot=0; - - //slot++; - if ((slot%20)==0) - frame++; - - ======= - slot=0; - continue; - >>>>>>> .r3153 - } - - if (diff>8) - printf("[dot11_thread] eNB Frame %d: skipped slot, waiting for hw to catch up (slot %d, hw_slot %d, mbox_current %d, mbox_target %d, diff %d)\n",frame, slot, hw_slot, mbox_current, mbox_target, diff); - - delay_cnt = 0; - - while ((diff>0) && (!oai_exit)) { - time_in = rt_get_time_ns(); - //rt_printk("eNB Frame %d delaycnt %d : hw_slot %d (%d), slot %d, (slot+1)*15=%d, diff %d, time %llu\n",frame,delay_cnt,hw_slot,((unsigned int *)DAQ_MBOX)[0],slot,(((slot+1)*15)>>1),diff,time_in); - //rt_printk("Frame %d: slot %d, sleeping for %llu\n", frame, slot, diff*DAQ_PERIOD); - rt_sleep(nano2count(diff*DAQ_PERIOD)); - hw_slot = (((((unsigned int *)DAQ_MBOX)[0]+1)%150)<<1)/15; - //rt_printk("eNB Frame %d : hw_slot %d, time %llu\n",frame,hw_slot,rt_get_time_ns()); - delay_cnt++; - - if (delay_cnt == 10) { - oai_exit = 1; - printf("[dot11_thread]eNB Frame %d: HW stopped ... \n",frame); - } - - mbox_current = ((unsigned int *)DAQ_MBOX)[0]; - - if ((mbox_current>=135) && (mbox_target<15)) //handle the frame wrap-arround - diff = 150-mbox_current+mbox_target; - else - diff = mbox_target - mbox_current; - } - - - last_slot = (slot)%LTE_SLOTS_PER_FRAME; - - if (last_slot <0) - last_slot+=20; - - next_slot = (slot+3)%LTE_SLOTS_PER_FRAME; - - <<<<<<< .mine - - - ======= - - if (frame>5) { - if ((frame%100)==0) -#ifdef HARD_RT - rt_printk("slot %d, hw_slot %d, next_slot %d (before): DAQ_MBOX %d\n", slot, hw_slot,next_slot,DAQ_MBOX[0]); - -#else - printf("frame %d slot %d, hw_slot %d, next_slot %d (before): DAQ_MBOX %d\n", frame,slot, hw_slot,next_slot,DAQ_MBOX[0]); -#endif - - if (fs4_test==0) { - if ((next_slot == 0) && (generate_test_tx==1) && ((frame%100)==0)) { - printf("Generating tx_signal in frame %d ...",frame); - //generate_test_tx_signal(); - printf("done\n"); - - } else { // Check for normal TX packet - /*for (i=0;i<3840;i++) { - ((uint32_t *)txdata[0] + (3840*next_slot))[i] = 0x00010001; - }*/ - } - } - - - } - - - - slot++; - - if (slot==20) - slot=0; - - //slot++; - if ((slot%20)==0) - frame++; - } - - rt_printk("fun0: finished, ran %d times.\n",slot); - -#ifdef HARD_RT - rt_make_soft_real_time(); -#endif - - // clean task - rt_task_delete(task); - rt_printk("Task deleted. returning\n"); - return 0; - } - - - - >>>>>>> .r3153 - int main(int argc, char **argv) { - - RT_TASK *task; - int i,j,aa; - - LTE_DL_FRAME_PARMS *frame_parms; - - u32 carrier_freq[4]= {1907600000,1907600000,1907600000,1907600000}; - u32 rf_mode_max[4] = {55231,55231,55231,55231}; - u32 rf_mode_med[4] = {39375,39375,39375,39375}; - u32 rf_mode_byp[4] = {22991,22991,22991,22991}; - - u32 rf_local[4] = {8255000,8255000,8255000,8255000}; // UE zepto - //{8254617, 8254617, 8254617, 8254617}; //eNB khalifa - //{8255067,8254810,8257340,8257340}; // eNB PETRONAS - - u32 rf_vcocal[4] = {2340,2340,2340,2340}; - u32 rf_rxdc[4] = {32896,32896,32896,32896}; - <<<<<<< .mine - u32 rxgain[4]= {20,20,20,20}; - ======= - >>>>>>> .r3153 - - <<<<<<< .mine - - ======= - - - >>>>>>> .r3153 - u8 eNB_id=0,UE_id=0; - u16 Nid_cell = 0; - u8 cooperation_flag=0, transmission_mode=1, abstraction_flag=0; - u8 beta_ACK=0,beta_RI=0,beta_CQI=2; - - int c; - char do_forms=0; - unsigned int fd,dot11_netlink_fd; - unsigned int tcxo = 114; - - int amp; - - char rxg_fname[100]; - char rflo_fname[100]; - FILE *rxg_fd=NULL; - FILE *rflo_fd=NULL; - - <<<<<<< .mine - ======= - - >>>>>>> .r3153 - const struct option long_options[] = { - {"calib-rx", required_argument, NULL, 256}, - {"calib-rx-med", required_argument, NULL, 257}, - {"calib-rx-byp", required_argument, NULL, 258}, - {NULL, 0, NULL, 0} - }; - - mode = normal_txrx; - - - while ((c = getopt_long (argc, argv, "C:ST:dF:t",long_options,NULL)) != -1) { - switch (c) { - case 'd': - do_forms=1; - break; - - case 't': - generate_test_tx = 1; - break; - - case 'C': - carrier_freq[0] = atoi(optarg); - carrier_freq[1] = atoi(optarg); - carrier_freq[2] = atoi(optarg); - carrier_freq[3] = atoi(optarg); - break; - - case 'S': - fs4_test=1; - break; - - case 'T': - tcxo=atoi(optarg); - break; - - case 'F': - sprintf(rxg_fname,"%srxg.lime",optarg); - rxg_fd = fopen(rxg_fname,"r"); - - if (rxg_fd) { - printf("Loading RX Gain parameters from %s\n",rxg_fname); - fscanf(rxg_fd,"%d %d %d %d",&rxg_max[0],&rxg_max[1],&rxg_max[2],&rxg_max[3]); - fscanf(rxg_fd,"%d %d %d %d",&rxg_med[0],&rxg_med[1],&rxg_med[2],&rxg_med[3]); - fscanf(rxg_fd,"%d %d %d %d",&rxg_byp[0],&rxg_byp[1],&rxg_byp[2],&rxg_byp[3]); - } else - printf("%s not found, running with defaults\n",rxg_fname); - - sprintf(rflo_fname,"%srflo.lime",optarg); - rflo_fd = fopen(rflo_fname,"r"); - - if (rflo_fd) { - printf("Loading RF LO parameters from %s\n",rflo_fname); - fscanf(rflo_fd,"%d %d %d %d",&rf_local[0],&rf_local[1],&rf_local[2],&rf_local[3]); - } else - printf("%s not found, running with defaults\n",rflo_fname); - - break; - - case 256: - mode = rx_calib_ue; - rx_input_level_dBm = atoi(optarg); - printf("Running with UE calibration on (LNA max), input level %d dBm\n",rx_input_level_dBm); - break; - - case 257: - mode = rx_calib_ue_med; - rx_input_level_dBm = atoi(optarg); - printf("Running with UE calibration on (LNA med), input level %d dBm\n",rx_input_level_dBm); - break; - - case 258: - mode = rx_calib_ue_byp; - rx_input_level_dBm = atoi(optarg); - printf("Running with UE calibration on (LNA byp), input level %d dBm\n",rx_input_level_dBm); - break; - - default: - break; - } - } - - - // to make a graceful exit when ctrl-c is pressed - signal(SIGSEGV, signal_handler); - - // init the parameters - frame_parms = (LTE_DL_FRAME_PARMS*) malloc(sizeof(LTE_DL_FRAME_PARMS)); - frame_parms->N_RB_DL = 25; - frame_parms->N_RB_UL = 25; - frame_parms->Ncp = 0; - frame_parms->Ncp_UL = 0; - frame_parms->Nid_cell = Nid_cell; - frame_parms->nushift = 0; - frame_parms->nb_antennas_tx = 1; - frame_parms->nb_antennas_rx = 1; - frame_parms->mode1_flag = 1; //default == SISO - frame_parms->frame_type = 1; - - if (fs4_test==1) - frame_parms->tdd_config = 255; - else - frame_parms->tdd_config = 3; - - frame_parms->tdd_config_S = 0; - frame_parms->phich_config_common.phich_resource = oneSixth; - frame_parms->phich_config_common.phich_duration = normal; - frame_parms->pusch_config_common.ul_ReferenceSignalsPUSCH.cyclicShift = 0;//n_DMRS1 set to 0 - - frame_parms->node_id = NODE; - - // for Express MIMO - for (i=0; i<4; i++) { - frame_parms->carrier_freq[i] = carrier_freq[i]; - frame_parms->carrier_freqtx[i] = carrier_freq[i]; - - <<<<<<< .mine - frame_parms->rxgain[i] = rxgain[i]; - ======= - frame_parms->rxgain[i] = rxgain[i]; - - frame_parms->rflocal[i] = rf_local[i]; - frame_parms->rfvcolocal[i] = rf_vcocal[i]; - frame_parms->rxdc[i] = rf_rxdc[i]; - frame_parms->rfmode[i] = rf_mode_max[i]; - - >>>>>>> .r3153 - } - - printf("Freq %d,%d,%d,%d, Gain %d,%d,%d,%d, RFmode %d, RXDC %d, RF_local %d, rf_vcocal %d\n", - frame_parms->carrier_freq[0],frame_parms->carrier_freq[1],frame_parms->carrier_freq[2],frame_parms->carrier_freq[3], - frame_parms->rxgain[0],frame_parms->rxgain[1],frame_parms->rxgain[2],frame_parms->rxgain[3], - frame_parms->rfmode[0],frame_parms->rflocal[0], - frame_parms->rxdc[0],frame_parms->rfvcolocal[0]); - - - frame_parms->nb_prefix_samples0 = 40; - frame_parms->nb_prefix_samples = 36; - frame_parms->symbols_per_tti = 14; - frame_parms->ofdm_symbol_size = 512; - - frame_parms->log2_symbol_size = 9; - frame_parms->samples_per_tti = 7680; - frame_parms->first_carrier_offset = frame_parms->ofdm_symbol_size - 150; - - openair_fd = setup_oai_hw(frame_parms); - printf("Setting up buffers for Antenna port 0\n"); - setup_dot11_buffers(&(rxdata[0]),&(txdata[0]),0); - printf("Setting up buffers for Antenna port 1\n"); - setup_dot11_buffers(&(rxdata[1]),&(txdata[1]),1); - - <<<<<<< .mine - printf("Initializing dot11 DSP functions\n"); - dot11_init(); - dot11_netlink_fd = dot11_netlink_init(); - ======= - >>>>>>> .r3153 - - <<<<<<< .mine - - for (j=0; j<76800; j+=4) - for (aa=0; aanb_antennas_tx; aa++) { - amp = 0x8000; - // ((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j+1] = 0; - //((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j+3] = amp-1; - //((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j+5] = 0; - //((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j+7] = amp; - //((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j] = amp-1; - //((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j+2] = 0; - //((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j+4] = amp; - //((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j+6] = 0; - } - - sleep(1); - printf("Calling openair_GET_PCI_INTERFACE %x\n",openair_GET_PCI_INTERFACE); - ioctl(openair_fd,openair_GET_PCI_INTERFACE,&pci_interface_ptr_kern); - - if (pci_interface_ptr_kern == 0) { - printf("null pci_interface_ptr, exiting\n"); - exit(-1); - } - - ======= - - for (j=0; j<76800; j+=4) - for (aa=0; aanb_antennas_tx; aa++) { - amp = 0x8000; - // ((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j+1] = 0; - //((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j+3] = amp-1; - //((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j+5] = 0; - //((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j+7] = amp; - //((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j] = amp-1; - //((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j+2] = 0; - //((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j+4] = amp; - //((short*)PHY_vars_eNB_g[0]->lte_eNB_common_vars.txdata[0][aa])[2*j+6] = 0; - } - - sleep(1); - printf("Calling openair_GET_PCI_INTERFACE %x\n",openair_GET_PCI_INTERFACE); - ioctl(openair_fd,openair_GET_PCI_INTERFACE,&pci_interface_ptr_kern); - - if (pci_interface_ptr_kern == 0) { - printf("null pci_interface_ptr, exiting\n"); - exit(-1); - } - - exmimo_pci_interface = (exmimo_pci_interface_t*) (pci_interface_ptr_kern-bigphys_top+mem_base); - printf("pci_interface_ptr_kern = %p, exmimo_pci_interface = %p\n", (void*) pci_interface_ptr_kern, exmimo_pci_interface); - DAQ_MBOX = (unsigned int *)(0xc0000000+exmimo_pci_interface->rf.mbox-bigphys_top+mem_base); - - printf("Initializing dot11 DSP functions\n"); - dot11_init(); - dot11_netlink_fd = netlink_init(); - >>>>>>> .r3153 - exmimo_pci_interface = (exmimo_pci_interface_t*) (pci_interface_ptr_kern-bigphys_top+mem_base); - printf("pci_interface_ptr_kern = %p, exmimo_pci_interface = %p\n", (void*) pci_interface_ptr_kern, exmimo_pci_interface); - DAQ_MBOX = (unsigned int *)(0xc0000000+exmimo_pci_interface->rf.mbox-bigphys_top+mem_base); - - <<<<<<< .mine - ======= - printf("dot11_netlink_fd %d\n",dot11_netlink_fd); - - - - >>>>>>> .r3153 - // make main thread LXRT soft realtime - printf("Starting LXRT ..."); - task = rt_task_init_schmod(nam2num("MYTASK"), 9, 0, 0, SCHED_FIFO, 0xF); - mlockall(MCL_CURRENT | MCL_FUTURE); - - // start realtime timer and scheduler - //rt_set_oneshot_mode(); - rt_set_periodic_mode(); - start_rt_timer(0); - <<<<<<< .mine - printf(" done\n"); - ======= - printf(" done\n"); - - >>>>>>> .r3153 - <<<<<<< .mine - //now = rt_get_time() + 10*PERIOD; - //rt_task_make_periodic(task, now, PERIOD); - - // initialize the instance cnt before starting the thread - // instance_cnt_ptr_user = &instance_cnt; - - - - // signal the driver to set up for user-space operation - // this will initialize the semaphore and the task pointers in the kernel - // further we receive back the pointer to the shared instance counter which is used to signal if the thread is busy or not. This pointer needs to be mapped to user space. - /* - ioctl(openair_fd,openair_START_LXRT,&instance_cnt_ptr_kern); - instance_cnt_ptr_user = (int*) (instance_cnt_ptr_kern -bigphys_top+mem_base); - *instance_cnt_ptr_user = -1; - printf("instance_cnt_ptr_kern %p, instance_cnt_ptr_user %p, *instance_cnt_ptr_user %d\n", (void*) instance_cnt_ptr_kern, (void*) instance_cnt_ptr_user,*instance_cnt_ptr_user); - */ - - ======= - >>>>>>> .r3153 - - <<<<<<< .mine - - - rt_sleep(nano2count(FRAME_PERIOD)); - ======= - >>>>>>> .r3153 - // this starts the DMA transfers - <<<<<<< .mine - ======= - ioctl(openair_fd,openair_START_TX_SIG,NULL); - //ioctl(openair_fd,openair_GET_BUFFER,NULL); - >>>>>>> .r3153 - - <<<<<<< .mine - ioctl(openair_fd,openair_START_TX_SIG,NULL); - - - ======= - >>>>>>> .r3153 - rt_sleep(nano2count(10*FRAME_PERIOD)); - - - <<<<<<< .mine - thread1 = rt_thread_create(dot11_thread, NULL, 100000000); - ======= - //thread1 = rt_thread_create(dot11_thread, NULL, 100000000); - >>>>>>> .r3153 - - - <<<<<<< .mine - printf("thread created\n"); - ======= - thread1 = rt_thread_create(rx_thread, &dot11_netlink_fd, 10000000); - >>>>>>> .r3153 - - thread2 = rt_thread_create(tx_thread, &dot11_netlink_fd, 10000000); - - // wait for end of program - printf("TYPE TO TERMINATE main thread\n"); - getchar(); - - // stop threads - rt_sleep(nano2count(FRAME_PERIOD)); - - stop_rt_timer(); - - fd = 0; - ioctl(openair_fd,openair_STOP,&fd); - munmap((void*)mem_base, BIGPHYS_NUMPAGES*4096); - - return 0; - } diff --git a/targets/RT/USER/ieee80211p-softmodem.c b/targets/RT/USER/ieee80211p-softmodem.c deleted file mode 100644 index ffd630d40b..0000000000 --- a/targets/RT/USER/ieee80211p-softmodem.c +++ /dev/null @@ -1,185 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) EURECOM / Thales Communications & Security - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * Thales Communications & Security - * - *****************************************************************************/ - -/****************************************************************************** - * - * Includes - * - *****************************************************************************/ - -#include -#include -#include -#include "ieee80211p-netlinkapi.h" -#include "phy/DOT11/defs.h" -#include "PHY/TOOLS/defs.h" -#include -#include -#include - -#include -#include -#include - - -/****************************************************************************** - * - * Definitions - * - *****************************************************************************/ - -enum nl80211_band { - NL80211_BAND_2GHZ, - NL80211_BAND_5GHZ, - NL80211_BAND_5_9GHZ, - NL80211_BAND_0_8GHZ, -}; - -enum ieee80211_band { - IEEE80211_BAND_2GHZ = NL80211_BAND_2GHZ, - IEEE80211_BAND_5GHZ = NL80211_BAND_5GHZ, - IEEE80211_BAND_5_9GHZ = NL80211_BAND_5_9GHZ, - IEEE80211_BAND_0_8GHZ = NL80211_BAND_0_8GHZ, -}; - -struct ieee80211p_rx_status { - short data_len; //frame data length in bytes - char rssi; //received power in dBm - char rate; //reveived data rate in units of 100 kbps - enum ieee80211_band band; - char flags; //RX flags -}; /* struct ieee80211p_rx_status */ - -extern uint32_t *txdata[2],*rxdata[2]; -//CHANNEL_STATUS_t dot11_state = IDLE; -extern int oai_exit; - -extern unsigned int *DAQ_MBOX; - -extern int Ndbps[8]; - -extern int32_t rxDATA_F_comp_aggreg2[48*1024]; -extern int32_t rxDATA_F_comp_aggreg3[48*1024]; - -extern uint32_t rxgain[4]; -extern uint32_t rxg_max[4], rxg_med[4], rxg_byp[4]; - -#define FRAME_LENGTH_SAMPLES 76800 -#define RX_THRES 60 - -#define SLOT_DURATION_5MHz 105 -#define RX_THRES_dB 40 - -int tx_sdu_active = 0; -int tx_sdu_length = 0; -char rxsdu[2000]; - -void *tx_thread(void *arg) -{ - - int fd=*((int*)arg); - RT_TASK *task; - int ret; - int i; - char dummy_data[10]; - - - if (fd > 0) { - - ret = netlink_send(fd,NLCMD_INIT,10,&dummy_data[0]); - - printf("tx_thread starting, fd %d\n",fd); - - task = rt_task_init_schmod(nam2num("TASK1"), 0, 0, 0, SCHED_FIFO, 0xF); - mlockall(MCL_CURRENT | MCL_FUTURE); - // rt_make_hard_real_time(); - - while (!oai_exit) { - - if (tx_sdu_active == 1) - printf("tx_thread: waiting (MBOX %d)\n",((unsigned int*)DAQ_MBOX)[0]); - - while(((volatile int)tx_sdu_active) != 0) { - rt_sleep(nano2count(66666)); - } - - printf("tx_thread: calling netlink\n"); - ret = netlink_recv(fd,rxsdu); - tx_sdu_active = 1; - tx_sdu_length = ret; - - /* - if (ret > 0) { - - printf("received TX SDU: "); - for (i=0;i