remove dead code in common_lib.h

common/utils/nr/nr_common.c

@@ -866,7 +866,6 @@ void get_samplerate_and_bw(int mu,
                            int n_rb,
                            int8_t threequarter_fs,
                            double *sample_rate,
-                           unsigned int *samples_per_frame,
                            double *tx_bw,
                            double *rx_bw) {
 
@@ -876,12 +875,10 @@ void get_samplerate_and_bw(int mu,
       if (threequarter_fs) {
         warn_higher_threequarter_fs(n_rb, mu);
         *sample_rate=92.16e6;
-        *samples_per_frame = 921600;
         *tx_bw = 50e6;
         *rx_bw = 50e6;
       } else {
         *sample_rate=61.44e6;
-        *samples_per_frame = 614400;
         *tx_bw = 50e6;
         *rx_bw = 50e6;
       }
@@ -890,10 +887,8 @@ void get_samplerate_and_bw(int mu,
     case 188: // 35Mhz
       if (threequarter_fs) {
         *sample_rate = 46.08e6;
-        *samples_per_frame = 460800;
       } else {
         *sample_rate = 61.44e6;
-        *samples_per_frame = 614400;
       }
       *tx_bw = (n_rb == 242) ? 45e6 : 35e6;
       *rx_bw = (n_rb == 242) ? 45e6 : 35e6;
@@ -901,13 +896,11 @@ void get_samplerate_and_bw(int mu,
     case 216:
       if (threequarter_fs) {
         *sample_rate=46.08e6;
-        *samples_per_frame = 460800;
         *tx_bw = 40e6;
         *rx_bw = 40e6;
       }
       else {
         *sample_rate=61.44e6;
-        *samples_per_frame = 614400;
         *tx_bw = 40e6;
         *rx_bw = 40e6;
       }
@@ -919,7 +912,6 @@ void get_samplerate_and_bw(int mu,
       }
       else {
         *sample_rate=30.72e6;
-        *samples_per_frame = 307200;
         *tx_bw = 20e6;
         *rx_bw = 20e6;
       }
@@ -927,13 +919,11 @@ void get_samplerate_and_bw(int mu,
     case 106:
       if (threequarter_fs) {
         *sample_rate=23.04e6;
-        *samples_per_frame = 230400;
         *tx_bw = 20e6;
         *rx_bw = 20e6;
       }
       else {
         *sample_rate=30.72e6;
-        *samples_per_frame = 307200;
         *tx_bw = 20e6;
         *rx_bw = 20e6;
       }
@@ -941,13 +931,11 @@ void get_samplerate_and_bw(int mu,
     case 52:
       if (threequarter_fs) {
         *sample_rate=11.52e6;
-        *samples_per_frame = 115200;
         *tx_bw = 10e6;
         *rx_bw = 10e6;
       }
       else {
         *sample_rate=15.36e6;
-        *samples_per_frame = 153600;
         *tx_bw = 10e6;
         *rx_bw = 10e6;
       }
@@ -955,13 +943,11 @@ void get_samplerate_and_bw(int mu,
     case 25:
       if (threequarter_fs) {
         *sample_rate=5.76e6;
-        *samples_per_frame = 57600;
         *tx_bw = 5e6;
         *rx_bw = 5e6;
       }
       else {
         *sample_rate=7.68e6;
-        *samples_per_frame = 76800;
         *tx_bw = 5e6;
         *rx_bw = 5e6;
       }
@@ -976,12 +962,10 @@ void get_samplerate_and_bw(int mu,
       if (threequarter_fs) {
         warn_higher_threequarter_fs(n_rb, mu);
         *sample_rate=184.32e6;
-        *samples_per_frame = 1843200;
         *tx_bw = 100e6;
         *rx_bw = 100e6;
       } else {
         *sample_rate=122.88e6;
-        *samples_per_frame = 1228800;
         *tx_bw = 100e6;
         *rx_bw = 100e6;
       }
@@ -989,12 +973,10 @@ void get_samplerate_and_bw(int mu,
     case 217:
       if (threequarter_fs) {
         *sample_rate=92.16e6;
-        *samples_per_frame = 921600;
         *tx_bw = 80e6;
         *rx_bw = 80e6;
       } else {
         *sample_rate=122.88e6;
-        *samples_per_frame = 1228800;
         *tx_bw = 80e6;
         *rx_bw = 80e6;
       }
@@ -1002,10 +984,8 @@ void get_samplerate_and_bw(int mu,
     case 189:
       if (threequarter_fs) {
         *sample_rate = 92.16e6;
-        *samples_per_frame = 921600;
       } else {
         *sample_rate = 122.88e6;
-        *samples_per_frame = 1228800;
       }
       *tx_bw = 70e6;
       *rx_bw = 70e6;
@@ -1016,7 +996,6 @@ void get_samplerate_and_bw(int mu,
       }
       else {
         *sample_rate=61.44e6;
-        *samples_per_frame = 614400;
         *tx_bw = 60e6;
         *rx_bw = 60e6;
       }
@@ -1029,7 +1008,6 @@ void get_samplerate_and_bw(int mu,
       }
       else {
         *sample_rate=61.44e6;
-        *samples_per_frame = 614400;
         *tx_bw = 50e6;
         *rx_bw = 50e6;
       }
@@ -1040,10 +1018,8 @@ void get_samplerate_and_bw(int mu,
     case 92: // 35Mhz
       if (threequarter_fs) {
         *sample_rate = 46.08e6;
-        *samples_per_frame = 460800;
       } else {
         *sample_rate = 61.44e6;
-        *samples_per_frame = 614400;
       }
       *tx_bw = (n_rb == 119) ? 45e6 : 35e6;
       *rx_bw = (n_rb == 119) ? 45e6 : 35e6;
@@ -1052,13 +1028,11 @@ void get_samplerate_and_bw(int mu,
     case 106:
       if (threequarter_fs) {
         *sample_rate=46.08e6;
-        *samples_per_frame = 460800;
         *tx_bw = 40e6;
         *rx_bw = 40e6;
       }
       else {
         *sample_rate=61.44e6;
-        *samples_per_frame = 614400;
         *tx_bw = 40e6;
         *rx_bw = 40e6;
       }
@@ -1066,13 +1040,11 @@ void get_samplerate_and_bw(int mu,
     case 51:
       if (threequarter_fs) {
         *sample_rate=23.04e6;
-        *samples_per_frame = 230400;
         *tx_bw = 20e6;
         *rx_bw = 20e6;
       }
       else {
         *sample_rate=30.72e6;
-        *samples_per_frame = 307200;
         *tx_bw = 20e6;
         *rx_bw = 20e6;
       }
@@ -1080,13 +1052,11 @@ void get_samplerate_and_bw(int mu,
     case 24:
       if (threequarter_fs) {
         *sample_rate=11.52e6;
-        *samples_per_frame = 115200;
         *tx_bw = 10e6;
         *rx_bw = 10e6;
       }
       else {
         *sample_rate=15.36e6;
-        *samples_per_frame = 153600;
         *tx_bw = 10e6;
         *rx_bw = 10e6;
       }
@@ -1100,12 +1070,10 @@ void get_samplerate_and_bw(int mu,
       case 128:
         if (threequarter_fs) {
           *sample_rate=184.32e6;
-          *samples_per_frame = 1843200;
           *tx_bw = 200e6;
           *rx_bw = 200e6;
         } else {
           *sample_rate = 245.76e6;
-          *samples_per_frame = 2457600;
           *tx_bw = 200e6;
           *rx_bw = 200e6;
         }
@@ -1115,12 +1083,10 @@ void get_samplerate_and_bw(int mu,
       case 64:
         if (threequarter_fs) {
           *sample_rate=92.16e6;
-          *samples_per_frame = 921600;
           *tx_bw = 100e6;
           *rx_bw = 100e6;
         } else {
           *sample_rate = 122.88e6;
-          *samples_per_frame = 1228800;
           *tx_bw = 100e6;
           *rx_bw = 100e6;
         }
@@ -1129,12 +1095,10 @@ void get_samplerate_and_bw(int mu,
       case 32:
         if (threequarter_fs) {
           *sample_rate=92.16e6;
-          *samples_per_frame = 921600;
           *tx_bw = 50e6;
           *rx_bw = 50e6;
         } else {
           *sample_rate=61.44e6;
-          *samples_per_frame = 614400;
           *tx_bw = 50e6;
           *rx_bw = 50e6;
         }

common/utils/nr/nr_common.h

@@ -317,7 +317,6 @@ void get_samplerate_and_bw(int mu,
                            int n_rb,
                            int8_t threequarter_fs,
                            double *sample_rate,
-                           unsigned int *samples_per_frame,
                            double *tx_bw,
                            double *rx_bw);
 uint32_t get_ssb_offset_to_pointA(uint32_t absoluteFrequencySSB,

executables/lte-ru.c

@@ -1251,45 +1251,37 @@ void fill_rf_config(RU_t *ru,
     if(ru->numerology == 0) {
       if (fp->threequarter_fs) {
         cfg->sample_rate=23.04e6;
-        cfg->samples_per_frame = 230400;
         cfg->tx_bw = 20e6;
         cfg->rx_bw = 20e6;
       } else {
         cfg->sample_rate=30.72e6;
-        cfg->samples_per_frame = 307200;
         cfg->tx_bw = 20e6;
         cfg->rx_bw = 20e6;
       }
     } else if(ru->numerology == 1) {
       cfg->sample_rate=61.44e6;
-      cfg->samples_per_frame = 307200;
       cfg->tx_bw = 20e6;
       cfg->rx_bw = 20e6;
     } else if(ru->numerology == 2) {
       cfg->sample_rate=122.88e6;
-      cfg->samples_per_frame = 307200;
       cfg->tx_bw = 40e6;
       cfg->rx_bw = 40e6;
     } else {
       LOG_I(PHY,"Wrong input for numerology %d\n setting to 20MHz normal CP configuration",numerology);
       cfg->sample_rate=30.72e6;
-      cfg->samples_per_frame = 307200;
       cfg->tx_bw = 10e6;
       cfg->rx_bw = 10e6;
     }
   } else if(fp->N_RB_DL == 50) {
     cfg->sample_rate=15.36e6;
-    cfg->samples_per_frame = 153600;
     cfg->tx_bw = 10e6;
     cfg->rx_bw = 10e6;
   } else if (fp->N_RB_DL == 25) {
     cfg->sample_rate=7.68e6;
-    cfg->samples_per_frame = 76800;
     cfg->tx_bw = 5e6;
     cfg->rx_bw = 5e6;
   } else if (fp->N_RB_DL == 6) {
     cfg->sample_rate=1.92e6;
-    cfg->samples_per_frame = 19200;
     cfg->tx_bw = 1.5e6;
     cfg->rx_bw = 1.5e6;
   } else AssertFatal(1==0,"Unknown N_RB_DL %d\n",fp->N_RB_DL);
@@ -1299,7 +1291,6 @@ void fill_rf_config(RU_t *ru,
   else //FDD
     cfg->duplex_mode = duplex_mode_FDD;
 
-  cfg->Mod_id = 0;
   cfg->num_rb_dl=fp->N_RB_DL;
   cfg->tx_num_channels=ru->nb_tx;
   cfg->rx_num_channels=ru->nb_rx;

executables/lte-uesoftmodem.c

@@ -343,28 +343,23 @@ static void init_openair0(LTE_DL_FRAME_PARMS *frame_parms, int rxgain)
     if(frame_parms->N_RB_DL == 100) {
       if (frame_parms->threequarter_fs) {
         openair0_cfg[card].sample_rate=23.04e6;
-        openair0_cfg[card].samples_per_frame = 230400;
         openair0_cfg[card].tx_bw = 10e6;
         openair0_cfg[card].rx_bw = 10e6;
       } else {
         openair0_cfg[card].sample_rate=30.72e6;
-        openair0_cfg[card].samples_per_frame = 307200;
         openair0_cfg[card].tx_bw = 10e6;
         openair0_cfg[card].rx_bw = 10e6;
       }
     } else if(frame_parms->N_RB_DL == 50) {
       openair0_cfg[card].sample_rate=15.36e6;
-      openair0_cfg[card].samples_per_frame = 153600;
       openair0_cfg[card].tx_bw = 5e6;
       openair0_cfg[card].rx_bw = 5e6;
     } else if (frame_parms->N_RB_DL == 25) {
       openair0_cfg[card].sample_rate=7.68e6;
-      openair0_cfg[card].samples_per_frame = 76800;
       openair0_cfg[card].tx_bw = 2.5e6;
       openair0_cfg[card].rx_bw = 2.5e6;
     } else if (frame_parms->N_RB_DL == 6) {
       openair0_cfg[card].sample_rate=1.92e6;
-      openair0_cfg[card].samples_per_frame = 19200;
       openair0_cfg[card].tx_bw = 1.5e6;
       openair0_cfg[card].rx_bw = 1.5e6;
     }
@@ -374,7 +369,6 @@ static void init_openair0(LTE_DL_FRAME_PARMS *frame_parms, int rxgain)
     else //FDD
       openair0_cfg[card].duplex_mode = duplex_mode_FDD;
 
-    openair0_cfg[card].Mod_id = 0;
     openair0_cfg[card].num_rb_dl=frame_parms->N_RB_DL;
     openair0_cfg[card].clock_source = get_softmodem_params()->clock_source;
     openair0_cfg[card].time_source = get_softmodem_params()->timing_source;

executables/nr-ru.c

@@ -819,7 +819,6 @@ static void fill_rf_config(RU_t *ru, char *rf_config_file)
                         N_RB,
                         fp->threequarter_fs,
                         &cfg->sample_rate,
-                        &cfg->samples_per_frame,
                         &cfg->tx_bw,
                         &cfg->rx_bw);
 
@@ -833,7 +832,6 @@ static void fill_rf_config(RU_t *ru, char *rf_config_file)
   AssertFatal(ru->nb_tx > 0 && ru->nb_tx <= 8, "openair0 does not support more than 8 antennas\n");
   AssertFatal(ru->nb_rx > 0 && ru->nb_rx <= 8, "openair0 does not support more than 8 antennas\n");
 
-  cfg->Mod_id = 0;
   cfg->num_rb_dl = N_RB;
   cfg->tx_num_channels = ru->nb_tx * ru->num_beams_period;
   cfg->rx_num_channels = ru->nb_rx * ru->num_beams_period;

executables/nr-uesoftmodem.c

@@ -238,14 +238,12 @@ void init_openair0(PHY_VARS_NR_UE *ue)
     uint64_t dl_carrier, ul_carrier;
     cfg->configFilename    = NULL;
     cfg->sample_rate       = frame_parms->samples_per_subframe * 1e3;
-    cfg->samples_per_frame = frame_parms->samples_per_frame;
 
     if (frame_parms->frame_type==TDD)
       cfg->duplex_mode = duplex_mode_TDD;
     else
       cfg->duplex_mode = duplex_mode_FDD;
 
-    cfg->Mod_id = 0;
     cfg->num_rb_dl = frame_parms->N_RB_DL;
     cfg->clock_source = get_softmodem_params()->clock_source;
     cfg->time_source = get_softmodem_params()->timing_source;

openair1/PHY/TOOLS/calibration_test.c

@@ -45,7 +45,6 @@ int main(int argc, char **argv) {
   CONFIG_CLEARRTFLAG(CONFIG_NOEXITONHELP);
   lock_memory_to_ram();
     
-  int N_RB=50;
   int sampling_rate=30.72e6;
   int DFT=2048;
   int TxAdvanceInDFTSize=12;
@@ -57,20 +56,8 @@ int main(int argc, char **argv) {
   char * usrp_addrs="type=b200";
 
   openair0_config_t openair0_cfg= {
-    //! Module ID for this configuration
-    .Mod_id=0,
-    //! duplexing mode
-    .duplex_mode=0,
-    //! number of downlink resource blocks
-    .num_rb_dl=N_RB,
-    //! number of samples per frame
-    .samples_per_frame=0,
     //! the sample rate for both transmit and receive.
     .sample_rate=sampling_rate,
-    //device is doing mmapped DMA transfers
-    .mmapped_dma=0,
-    //! offset in samples between TX and RX paths
-    .tx_sample_advance=0,
     //! samples per packet on the fronthaul interface
     .samples_per_packet=1024,
     //! number of RX channels (=RX antennas)
@@ -83,17 +70,9 @@ int main(int argc, char **argv) {
     //! \brief Center frequency in Hz for TX.
     //! index: [0..rx_num_channels[ !!! see lte-ue.c:427 FIXME iterates over rx_num_channels
     .tx_freq={freq,freq,freq,freq},
-    //! \brief memory
-    //! \brief Pointer to Calibration table for RX gains
-    .rx_gain_calib_table=NULL,
-    //! mode for rxgain (ExpressMIMO2)
-    .rxg_mode={0},
     //! \brief Gain for RX in dB.
     //! index: [0..rx_num_channels]
     .rx_gain={rxGain,rxGain,rxGain,rxGain},
-    //! \brief Gain offset (for calibration) in dB
-    //! index: [0..rx_num_channels]
-    .rx_gain_offset={0},
     //! gain for TX in dB
     .tx_gain={txGain,txGain,txGain,txGain},
     //! RX bandwidth in Hz
@@ -106,32 +85,9 @@ int main(int argc, char **argv) {
     .time_source=internal, //internal gpsdo external
     //! Manual SDR IP address
     .sdr_addrs=usrp_addrs,
-    //! Auto calibration flag
-    .autocal={0},
-    //! Configuration file for LMS7002M
-    .configFilename="",
-    //! remote IP/MAC addr for Ethernet interface
-    .remote_addr="",
-    //! remote port number for Ethernet interface
-    .remote_port=0,
-    //! local IP/MAC addr for Ethernet interface (eNB/BBU, UE)
-    .my_addr=0,
-    //! local port number for Ethernet interface (eNB/BBU, UE)
-    .my_port=0,
-    //! record player configuration, definition in record_player.h
-    .recplay_mode=0,
-    .recplay_conf=NULL,
-    //! number of samples per tti
-    .samples_per_tti=0,
   };
   //-----------------------
   openair0_device rfdevice= {
-    /*!tx write thread*/
-    //.write_thread={0},
-    /*!brief Module ID of this device */
-    .Mod_id=0,
-    /*!brief Component Carrier ID of this device */
-    .CC_id=0,
     /*!brief Type of this device */
     .type=NONE_DEV,
     /*!brief Transport protocol type that the device supports (in case I/Q samples need to be transported) */

openair1/PHY/defs_UE.h

@@ -551,7 +551,6 @@ typedef struct {
   uint8_t CC_id;
   /// \brief Mapping of CC_id antennas to cards
   openair0_rf_map      rf_map;
-  //uint8_t local_flag;
   /// \brief Indicator of current run mode of UE (normal_txrx, rx_calib_ue, no_L2_connect, debug_prach)
   runmode_t mode;
   /// \brief Indicator that UE is configured for FeMBMS functionality (This flag should be avoided) ... just kept for PBCH initical scan (TODO)

openair1/SIMULATION/NR_PHY/dlsim.c

@@ -852,13 +852,10 @@ int main(int argc, char **argv)
   if (g_rbSize < 0) g_rbSize = N_RB_DL - g_rbStart;
 
   double fs,txbw,rxbw;
-  uint32_t samples;
-
   get_samplerate_and_bw(mu,
                         N_RB_DL,
                         frame_parms->threequarter_fs,
                         &fs,
-                        &samples,
                         &txbw,
                         &rxbw);
 

openair1/SIMULATION/NR_PHY/pbchsim.c

@@ -437,9 +437,7 @@ int main(int argc, char **argv)
   double fs=0, eps;
   double scs = 30000;
   double txbw, rxbw;
-  uint32_t samples;
+  get_samplerate_and_bw(mu, N_RB_DL, frame_parms->threequarter_fs, &fs, &txbw, &rxbw);
-
-  get_samplerate_and_bw(mu, N_RB_DL, frame_parms->threequarter_fs, &fs, &samples, &txbw, &rxbw);
 
   // cfo with respect to sub-carrier spacing
   eps = cfo/scs;

openair1/SIMULATION/NR_PHY/pucchsim.c

@@ -445,13 +445,10 @@ int main(int argc, char **argv)
     gNB->common_vars.rxdataF[0][i] = malloc16_clear(gNB->frame_parms.samples_per_frame_wCP * sizeof(c16_t));
 
   double fs,txbw,rxbw;
-  uint32_t samples;
-
   get_samplerate_and_bw(mu,
                         N_RB_DL,
                         frame_parms->threequarter_fs,
                         &fs,
-                        &samples,
                         &txbw,
                         &rxbw);
 

openair1/SIMULATION/NR_PHY/srssim.c

@@ -325,8 +325,7 @@ int main(int argc, char *argv[])
     snr1 = snr0 + 10;
 
   double sampling_rate, tx_bandwidth, rx_bandwidth;
-  uint32_t samples;
+  get_samplerate_and_bw(mu, N_RB_DL, threequarter_fs, &sampling_rate, &tx_bandwidth, &rx_bandwidth);
-  get_samplerate_and_bw(mu, N_RB_DL, threequarter_fs, &sampling_rate, &samples, &tx_bandwidth, &rx_bandwidth);
 
   // Initialize gNB
   gNB = calloc_or_fail(1, sizeof(PHY_VARS_gNB));

openair1/SIMULATION/NR_PHY/ulsim.c

@@ -711,12 +711,10 @@ int main(int argc, char *argv[])
     snr1 = snr0 + 10;
 
   double sampling_frequency, tx_bandwidth, rx_bandwidth;
-  uint32_t samples;
   get_samplerate_and_bw(mu,
                         N_RB_DL,
                         threequarter_fs,
                         &sampling_frequency,
-                        &samples,
                         &tx_bandwidth,
                         &rx_bandwidth);
 

radio/COMMON/common_lib.h

@@ -117,7 +117,6 @@ typedef enum {
   MAX_TRANSP_TYPE
 } transport_type_t;
 
-
 /*!\brief  openair0 device host type */
 typedef enum {
   MIN_HOST_TYPE = 0,
@@ -211,16 +210,10 @@ typedef struct split7_config {
 
 /*! \brief RF frontend parameters set by application */
 typedef struct openair0_config {
-  //! Module ID for this configuration
+   //! duplexing mode
-  int Mod_id;
-  //! duplexing mode
   duplex_mode_t duplex_mode; 
   //! number of downlink resource blocks
-  int num_rb_dl;
+  int num_rb_dl;  double sample_rate;
-  //! number of samples per frame
-  unsigned int  samples_per_frame;
-  //! the sample rate for both transmit and receive.
-  double sample_rate;
   //! flag to indicate that the device is doing mmapped DMA transfers
   int mmapped_dma;
   //! offset in samples between TX and RX paths
@@ -254,8 +247,6 @@ typedef struct openair0_config {
   //! \brief memory
   //! \brief Pointer to Calibration table for RX gains
   rx_gain_calib_table_t *rx_gain_calib_table;
-  //! mode for rxgain (ExpressMIMO2)
-  rx_gain_t rxg_mode[8];
   //! \brief Gain for RX in dB.
   //! index: [0..rx_num_channels]
   double rx_gain[8];
@@ -278,23 +269,9 @@ typedef struct openair0_config {
   int autocal[8];
   //! Configuration file for LMS7002M
   char *configFilename;
-  //! remote IP/MAC addr for Ethernet interface
-  char *remote_addr;
-  //! remote port number for Ethernet interface
-  unsigned int remote_port;
-  //! local IP/MAC addr for Ethernet interface (eNB/BBU, UE)
-  char *my_addr;
-  //! local port number for Ethernet interface (eNB/BBU, UE)
-  unsigned int my_port;
   //! record player configuration, definition in record_player.h
   uint32_t       recplay_mode;
   recplay_conf_t *recplay_conf;
-  //! number of samples per tti
-  unsigned int  samples_per_tti;
-  //! the sample rate for receive.
-  double rx_sample_rate;
-  //! the sample rate for transmit.
-  double tx_sample_rate;
   //! Flag to indicate this configuration is for NR
   int nr_flag;
   //! NR band number
@@ -406,17 +383,11 @@ typedef struct {
   } queue[WRITE_QUEUE_SZ];
 } re_order_t;
 
-/*!\brief structure holds the parameters to configure USRP devices */
+/*!\brief structure holds the parameters to configure RF devices */
 struct openair0_device_t {
   /*!tx write thread*/
   openair0_thread_t write_thread;
 
-  /*!brief Module ID of this device */
-  int Mod_id;
-
-  /*!brief Component Carrier ID of this device */
-  int CC_id;
-
   /*!brief Type of this device */
   dev_type_t type;
 
@@ -435,17 +406,12 @@ struct openair0_device_t {
   recplay_state_t *recplay_state;
   /* !brief Indicates if device already initialized */
   int is_init;
-
-
   /*!brief Can be used by driver to hold internal structure*/
   void *priv;
 
   /*!brief pointer to FH state, used in ECPRI split 8*/
   fhstate_t fhstate;
 
-  /*!brief message response for notification fifo*/
-  notifiedFIFO_t *respudpTX;
-
   /*!brief UDP TX thread context*/
   udp_ctx_t **utx;
 
@@ -678,14 +644,6 @@ struct openair0_device_t {
   re_order_t reOrder;
 };
 
-/* type of device init function, implemented in shared lib */
-typedef int(*oai_device_initfunc_t)(openair0_device *device, openair0_config_t *openair0_cfg);
-/* type of transport init function, implemented in shared lib */
-typedef int(*oai_transport_initfunc_t)(openair0_device *device, openair0_config_t *openair0_cfg, eth_params_t *eth_params);
-
-#define OPTION_LZ4  0x00000001          // LZ4 compression (option_value is set to compressed size)
-
-
 typedef struct {
   uint32_t size;           // Number of samples per antenna to follow this header
   uint32_t nbAnt;          // Total number of antennas following this header
@@ -706,7 +664,6 @@ extern "C"
 
 #define  DEVICE_SECTION   "device"
 #define  CONFIG_HLP_DEVICE  "Identifies the oai device (the interface to RF) to use, the shared lib \"lib_<name>.so\" will be loaded"
-
 #define  CONFIG_DEVICEOPT_NAME "name"
 
 /* inclusion for device configuration */
@@ -727,12 +684,6 @@ int openair0_device_load(openair0_device *device, openair0_config_t *openair0_cf
 /*! \brief Initialize transport protocol . It returns 0 if OK */
 int openair0_transport_load(openair0_device *device, openair0_config_t *openair0_cfg, eth_params_t *eth_params);
 
-
-/*! \brief Get current timestamp of USRP
- * \param device the hardware to use
- */
-openair0_timestamp get_usrp_time(openair0_device *device);
-
 /*! \brief Set RX frequencies
  * \param device the hardware to use
  * \param openair0_cfg RF frontend parameters set by application

radio/ETHERNET/ethernet_lib.c

@@ -130,9 +130,6 @@ int trx_eth_start(openair0_device *device)
        }
        device->threadPool = (tpool_t*)malloc(sizeof(tpool_t));
        initTpool(pool, device->threadPool, cpumeas(CPUMEAS_GETSTATE));
-       // ULSCH decoder result FIFO
-       device->respudpTX = (notifiedFIFO_elt_t*) malloc(sizeof(notifiedFIFO_elt_t));
-       initNotifiedFIFO(device->respudpTX);
 #endif
    }
    /* initialize socket */
@@ -498,7 +495,6 @@ int transport_init(openair0_device *device,
 
     printf("[ETHERNET]: Initializing openair0_device for %s ...\n", ((device->host_type == RAU_HOST) ? "RAU": "RRU"));
     printf("[ETHERNET]: num_fd %d\n",eth->num_fd);
-    device->Mod_id           = 0;//num_devices_eth++;
     device->transp_type      = ETHERNET_TP;
     device->trx_start_func   = trx_eth_start;
     device->trx_get_stats_func   = trx_eth_get_stats;
@@ -582,7 +578,7 @@ void dump_dev(openair0_device *device)
 {
     eth_state_t *eth = (eth_state_t*)device->priv;
 
-    printf("Ethernet device interface %i configuration:\n" ,device->openair0_cfg->Mod_id);
+    printf("Ethernet device configuration:\n");
     printf("       RB number: %i, sample rate: %lf \n" ,
            device->openair0_cfg->num_rb_dl, device->openair0_cfg->sample_rate);
     printf("       RAU configured for %i tx/%i rx channels)\n",
@@ -598,7 +594,7 @@ void dump_dev(openair0_device *device)
 void inline dump_txcounters(openair0_device *device)
 {
     eth_state_t *eth = (eth_state_t*)device->priv;
-    printf("   Ethernet device interface %i, tx counters:\n" ,device->openair0_cfg->Mod_id);
+    printf("   Ethernet device interface tx counters:\n");
     printf("   Sent packets: %llu send errors: %i\n",   (long long unsigned int)eth->tx_count, eth->num_tx_errors);
 }
 
@@ -606,7 +602,7 @@ void inline dump_txcounters(openair0_device *device)
 void inline dump_rxcounters(openair0_device *device)
 {
     eth_state_t *eth = (eth_state_t*)device->priv;
-    printf("   Ethernet device interface %i rx counters:\n" ,device->openair0_cfg->Mod_id);
+    printf("   Ethernet device interface rx counters:\n");
     printf("   Received packets: %llu missed packets errors: %i\n", (long long unsigned int)eth->rx_count, eth->num_underflows);
 }
 

radio/fhi_72/oran_isolate.c

@@ -397,7 +397,6 @@ __attribute__((__visibility__("default"))) int transport_init(openair0_device *d
   eth->e.if_name = eth_params->local_if_name;
   eth->last_msg = (rru_config_msg_type_t)-1;
 
-  device->Mod_id = 0;
   device->transp_type = ETHERNET_TP;
   device->trx_start_func = trx_oran_start;
   device->trx_get_stats_func = trx_oran_get_stats;