From def42f92d8ccb38b889fdc149957b6a54b75046d Mon Sep 17 00:00:00 2001 From: Remi Hardy Date: Fri, 31 Jul 2020 15:07:26 +0200 Subject: [PATCH] Update TESTING_GNB_W_COTS_UE.md --- doc/TESTING_GNB_W_COTS_UE.md | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/doc/TESTING_GNB_W_COTS_UE.md b/doc/TESTING_GNB_W_COTS_UE.md index d4381a1ca5..d2f167164a 100644 --- a/doc/TESTING_GNB_W_COTS_UE.md +++ b/doc/TESTING_GNB_W_COTS_UE.md @@ -1,4 +1,5 @@ -STATUS 2020/06/26 : information is up to date, but under continuous improvement +STATUS 2020/07/30 : under continuous improvement ; updated the configuration files links with CI approved reference files + ## Table of Contents ## @@ -78,15 +79,17 @@ https://github.com/OPENAIRINTERFACE/openair-epc-fed/blob/master-documentation/do Each component (EPC, eNB, gNB) has its own configuration file. These config files are passed as arguments of the run command line, using the option -O \ -Some config examples can be found in the following folder: -https://gitlab.eurecom.fr/oai/openairinterface5g/-/tree/develop/targets/PROJECTS/GENERIC-LTE-EPC/CONF - -Also base config files can be found here: +The **REFERENCE** files for eNB and gNB, **used by the CI**, can be found here: [enb conf file](../ci-scripts/conf_files/enb.band7.tm1.fr1.25PRB.usrpb210.conf) [gnb conf file](../ci-scripts/conf_files/gnb.band78.tm1.fr1.106PRB.usrpb210.conf) These files have to be updated manually to set the IP addresses and frequency. + +**ATTENTION** : an **EXTERNAL** clock is used to sync the eNB and gNB, +whether the clock is internal or external is defined in the configuration files (!! details needed !!) + + 1- In the **eNB configuration file** : - look for MME IP address, and update the **ipv4 field** with the IP address of the **EPC** server ``` @@ -126,7 +129,7 @@ These files have to be updated manually to set the IP addresses and frequency. } ); ``` -- look for X2 IP address, and update the **4 fields** with the IP address of the **eNB** server (notice : even if -in principle- S1 MME is not required for gNB setting) +- look for X2 IP address, and update the **4 fields** with the IP address of the **eNB** server / **gNB** server as below (notice : even if -in principle- S1 MME is not required for gNB setting) ``` ///X2