maki/openairinterface5g
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Merge remote-tracking branch 'origin/develop' into support-15-kHz-SCS

Browse Source
This commit is contained in:
Thomas Schlichter
2022-05-18 10:51:19 +02:00
parent 7815293443 5bf454c78b
commit e639e79220
195 changed files with 8447 additions and 3089 deletions
Download Patch File Download Diff File Expand all files Collapse all files
targets/ARCH/AW2SORI/oaiori.c
+319 -98
View File
@@ -101,31 +101,37 @@ static const eutra_bandentry_t eutra_bandtable[] = {
uint32_t to_earfcn_DL_aw2s(int eutra_bandP, long long int dl_CarrierFreq, uint32_t bw) {
uint32_t dl_CarrierFreq_by_100k = dl_CarrierFreq / 100000;
int i;
int i=0;
if (eutra_bandP > 68) { printf("eutra_band %d > 68\n", eutra_bandP); exit(-1);}
for (i = 0; i < BANDTABLE_SIZE && eutra_bandtable[i].band != eutra_bandP; i++);
printf("AW2S: band %d, index %d\n",eutra_bandP, i);
if (eutra_bandP > 0)
for (i = 0; i < BANDTABLE_SIZE && eutra_bandtable[i].band != eutra_bandP; i++);
printf("AW2S: band %d: index %d\n",eutra_bandP, i);
if (i >= BANDTABLE_SIZE) { printf(" i = %d , it will trigger out-of-bounds read.\n",i); exit(-1);}
if (dl_CarrierFreq_by_100k < eutra_bandtable[i].dl_min) {
printf("Band %d, bw %u : DL carrier frequency %u .1 MHz < %u\n",
eutra_bandP, bw, dl_CarrierFreq_by_100k,
eutra_bandtable[i].dl_min); exit(-1);}
while(i<BANDTABLE_SIZE) {
if (dl_CarrierFreq_by_100k < eutra_bandtable[i].dl_min) {
printf("Band %d, bw %u : DL carrier frequency %u .1 MHz < %u\n",
eutra_bandtable[i].band, bw, dl_CarrierFreq_by_100k,
eutra_bandtable[i].dl_min); i++; continue;}
if(dl_CarrierFreq_by_100k >
(eutra_bandtable[i].dl_max - bw)) {
printf("Band %d, bw %u : DL carrier frequency %u .1MHz > %d\n",
eutra_bandP, bw, dl_CarrierFreq_by_100k,
eutra_bandtable[i].dl_max - bw); exit(-1); }
printf("AW2S: dl_CarrierFreq_by_100k %d, dl_min %d\n",dl_CarrierFreq_by_100k,eutra_bandtable[i].dl_min);
if(dl_CarrierFreq_by_100k >
(eutra_bandtable[i].dl_max - bw)) {
printf("Band %d, bw %u : DL carrier frequency %u .1MHz > %d\n",
eutra_bandtable[i].band, bw, dl_CarrierFreq_by_100k,
eutra_bandtable[i].dl_max - bw); i++;continue; }
printf("AW2S: dl_CarrierFreq_by_100k %d, dl_min %d\n",dl_CarrierFreq_by_100k,eutra_bandtable[i].dl_min);
return (dl_CarrierFreq_by_100k - eutra_bandtable[i].dl_min +
(eutra_bandtable[i].N_OFFs_DL / 10));
return (dl_CarrierFreq_by_100k - eutra_bandtable[i].dl_min +
(eutra_bandtable[i].N_OFFs_DL / 10));
}
printf("No DL band found\n");
exit(-1);
}
uint32_t to_earfcn_UL_aw2s(int eutra_bandP, long long int ul_CarrierFreq, uint32_t bw) {
uint32_t ul_CarrierFreq_by_100k = ul_CarrierFreq / 100000;
int i;
@@ -134,6 +140,7 @@ uint32_t to_earfcn_UL_aw2s(int eutra_bandP, long long int ul_CarrierFreq, uint32
exit(-1);
}
for (i = 0; i < BANDTABLE_SIZE && eutra_bandtable[i].band != eutra_bandP; i++);
if(i >= BANDTABLE_SIZE) {printf("i = %d , it will trigger out-of-bounds read.\n",i); exit(-1);}
@@ -221,15 +228,41 @@ int aw2s_startstreaming(openair0_device *device) {
ORI_Result_e RE_result;
openair0_config_t *openair0_cfg = device->openair0_cfg;
ORI_Object_s *tx0,*tx1,*tx2,*tx3,*rx0,*rx1,*rx2,*rx3;
if (openair0_cfg->nr_flag == 0 ) {
tx0= ORI_FindObject(ori, openair0_cfg->duplex_mode == duplex_mode_FDD ? ORI_ObjectType_TxEUtraFDD :ORI_ObjectType_TxEUtraTDD, 0, NULL);
tx1= (openair0_cfg->tx_num_channels > 1) ? ORI_FindObject(ori, openair0_cfg->duplex_mode == duplex_mode_FDD ?ORI_ObjectType_TxEUtraFDD : ORI_ObjectType_TxEUtraTDD, 1, NULL) : NULL;
tx2= (openair0_cfg->tx_num_channels > 2) ? ORI_FindObject(ori, openair0_cfg->duplex_mode == duplex_mode_FDD ?ORI_ObjectType_TxEUtraFDD : ORI_ObjectType_TxEUtraTDD, 2, NULL) : NULL;
tx3= (openair0_cfg->tx_num_channels > 3) ? ORI_FindObject(ori, openair0_cfg->duplex_mode == duplex_mode_FDD ?ORI_ObjectType_TxEUtraFDD : ORI_ObjectType_TxEUtraTDD, 3, NULL) : NULL;
rx0= ORI_FindObject(ori, openair0_cfg->duplex_mode == duplex_mode_FDD ?ORI_ObjectType_RxEUtraFDD : ORI_ObjectType_RxEUtraTDD, 0, NULL);
rx1= (openair0_cfg->rx_num_channels > 1) ? ORI_FindObject(ori, openair0_cfg->duplex_mode == duplex_mode_FDD ?ORI_ObjectType_RxEUtraFDD : ORI_ObjectType_RxEUtraTDD, 1, NULL) : NULL;
rx2= (openair0_cfg->rx_num_channels > 2) ? ORI_FindObject(ori, openair0_cfg->duplex_mode == duplex_mode_FDD ?ORI_ObjectType_RxEUtraFDD : ORI_ObjectType_RxEUtraTDD, 2, NULL) : NULL;
rx3= (openair0_cfg->rx_num_channels > 3) ? ORI_FindObject(ori, openair0_cfg->duplex_mode == duplex_mode_FDD ?ORI_ObjectType_RxEUtraFDD : ORI_ObjectType_RxEUtraTDD, 3, NULL) : NULL;
} else {
tx0= ORI_FindObject(ori, openair0_cfg->duplex_mode == duplex_mode_FDD ? ORI_ObjectType_TxNRFDD :ORI_ObjectType_TxNRTDD, 0, NULL);
tx1= (openair0_cfg->tx_num_channels > 1) ? ORI_FindObject(ori, openair0_cfg->duplex_mode == duplex_mode_FDD ?ORI_ObjectType_TxNRFDD : ORI_ObjectType_TxNRTDD, 1, NULL) : NULL;
tx2= (openair0_cfg->tx_num_channels > 2) ? ORI_FindObject(ori, openair0_cfg->duplex_mode == duplex_mode_FDD ?ORI_ObjectType_TxNRFDD : ORI_ObjectType_TxNRTDD, 2, NULL) : NULL;
tx3= (openair0_cfg->tx_num_channels > 3) ? ORI_FindObject(ori, openair0_cfg->duplex_mode == duplex_mode_FDD ?ORI_ObjectType_TxNRFDD : ORI_ObjectType_TxNRTDD, 3, NULL) : NULL;
rx0= ORI_FindObject(ori, openair0_cfg->duplex_mode == duplex_mode_FDD ?ORI_ObjectType_RxNRFDD : ORI_ObjectType_RxNRTDD, 0, NULL);
rx1= (openair0_cfg->rx_num_channels > 1) ? ORI_FindObject(ori, openair0_cfg->duplex_mode == duplex_mode_FDD ?ORI_ObjectType_RxNRFDD : ORI_ObjectType_RxNRTDD, 1, NULL) : NULL;
rx2= (openair0_cfg->rx_num_channels > 2) ? ORI_FindObject(ori, openair0_cfg->duplex_mode == duplex_mode_FDD ?ORI_ObjectType_RxNRFDD : ORI_ObjectType_RxNRTDD, 2, NULL) : NULL;
rx3= (openair0_cfg->rx_num_channels > 3) ? ORI_FindObject(ori, openair0_cfg->duplex_mode == duplex_mode_FDD ?ORI_ObjectType_RxNRFDD : ORI_ObjectType_RxNRTDD, 3, NULL) : NULL;
ORI_Object_s *tx0= ORI_FindObject(ori, openair0_cfg->duplex_mode == duplex_mode_FDD ? ORI_ObjectType_TxEUtraFDD :ORI_ObjectType_TxEUtraTDD, 0, NULL);
ORI_Object_s *tx1= (openair0_cfg->tx_num_channels > 1) ? ORI_FindObject(ori, openair0_cfg->duplex_mode == duplex_mode_FDD ?ORI_ObjectType_TxEUtraFDD : ORI_ObjectType_TxEUtraTDD, 1, NULL) : NULL;
ORI_Object_s *rx0= ORI_FindObject(ori, openair0_cfg->duplex_mode == duplex_mode_FDD ?ORI_ObjectType_RxEUtraFDD : ORI_ObjectType_RxEUtraTDD, 0, NULL);
ORI_Object_s *rx1= (openair0_cfg->rx_num_channels > 1) ? ORI_FindObject(ori, openair0_cfg->duplex_mode == duplex_mode_FDD ?ORI_ObjectType_RxEUtraFDD : ORI_ObjectType_RxEUtraTDD, 1, NULL) : NULL;
}
ORI_Object_s *link= ORI_FindObject(ori, ORI_ObjectType_ORILink, 0, NULL);
if (tx0 == NULL || (tx1 == NULL && openair0_cfg->tx_num_channels > 1) || rx0 == NULL || (rx1 == NULL && openair0_cfg->rx_num_channels > 1) || link == NULL) return (-1);
if (tx0 == NULL ||
(tx1 == NULL && openair0_cfg->tx_num_channels > 1) ||
(tx2 == NULL && openair0_cfg->tx_num_channels > 2) ||
(tx3 == NULL && openair0_cfg->tx_num_channels > 3) ||
rx0 == NULL ||
(rx1 == NULL && openair0_cfg->rx_num_channels > 1) ||
(rx2 == NULL && openair0_cfg->rx_num_channels > 2) ||
(rx3 == NULL && openair0_cfg->rx_num_channels > 3) ||
link == NULL) {
printf("tx0 %p, tx1 %p, tx2 %p, tx3 %p, rx0 %p, rx1 %p, rx2 %p, rx3 %p\n",tx0,tx1,tx2,tx3,rx0,rx1,rx2,rx3);
return (-1);
}
/*******************************************************************
* UNLOCK Link
*******************************************************************/
@@ -277,6 +310,40 @@ int aw2s_startstreaming(openair0_device *device) {
}
printf("ORI_ObjectStateModify: %s\n", ORI_Result_Print(RE_result));
}
/*******************************************************************
* UNLOCK TX2
*******************************************************************/
if (tx2) {
printf("\n\n\n========================================================\n");
/* Put Tx1 into service */
result = ORI_ObjectStateModification(ori, tx2, ORI_AST_Unlocked, &RE_result);
if(result != ORI_Result_SUCCESS)
{
printf("ORI_ObjectStateModify failed with error: %s\n", ORI_Result_Print(result));
aw2s_oricleanup(device);
return -1;
}
printf("ORI_ObjectStateModify: %s\n", ORI_Result_Print(RE_result));
}
/*******************************************************************
* UNLOCK TX3
*******************************************************************/
if (tx3) {
printf("\n\n\n========================================================\n");
/* Put Tx3 into service */
result = ORI_ObjectStateModification(ori, tx1, ORI_AST_Unlocked, &RE_result);
if(result != ORI_Result_SUCCESS)
{
printf("ORI_ObjectStateModify failed with error: %s\n", ORI_Result_Print(result));
aw2s_oricleanup(device);
return -1;
}
printf("ORI_ObjectStateModify: %s\n", ORI_Result_Print(RE_result));
}
/*******************************************************************
* UNLOCK RX0
*******************************************************************/
@@ -313,16 +380,51 @@ int aw2s_startstreaming(openair0_device *device) {
printf("ORI_ObjectStateModify: %s\n", ORI_Result_Print(RE_result));
}
/*******************************************************************
* UNLOCK RX2
*******************************************************************/
if (rx2) {
printf("\n\n\n========================================================\n");
/* Put Rx1 into service */
result = ORI_ObjectStateModification(ori, rx2, ORI_AST_Unlocked, &RE_result);
if(result != ORI_Result_SUCCESS)
{
printf("ORI_ObjectStateModify failed with error: %s\n", ORI_Result_Print(result));
aw2s_oricleanup(device);
return -1;
}
printf("ORI_ObjectStateModify: %s\n", ORI_Result_Print(RE_result));
}
/*******************************************************************
* UNLOCK RX3
*******************************************************************/
if (rx3) {
printf("\n\n\n========================================================\n");
/* Put Rx1 into service */
result = ORI_ObjectStateModification(ori, rx3, ORI_AST_Unlocked, &RE_result);
if(result != ORI_Result_SUCCESS)
{
printf("ORI_ObjectStateModify failed with error: %s\n", ORI_Result_Print(result));
aw2s_oricleanup(device);
return -1;
}
printf("ORI_ObjectStateModify: %s\n", ORI_Result_Print(RE_result));
}
/*
while (rx0->fst != ORI_FST_Operational ||
(openair0_cfg->rx_num_channels > 1 && rx1->fst != ORI_FST_Operational) ||
tx0->fst != ORI_FST_Operational ||
(openair0_cfg->tx_num_channels > 1 && tx1->fst != ORI_FST_Operational))
{}
{}*/
// test RX interface
uint64_t TS;
char temp_rx[1024] __attribute__((aligned(32)));
char temp_rx[2048] __attribute__((aligned(32)));
int aid,r0=0,r1=(openair0_cfg->rx_num_channels > 1) ? 0 : 1;
int r2=(openair0_cfg->rx_num_channels > 2) ? 0 : 1;
int r3=(openair0_cfg->rx_num_channels > 3) ? 0 : 1;
int i;
int Npackets=1024000;
for (i=0;i<Npackets;i++) {
@@ -333,15 +435,23 @@ int aw2s_startstreaming(openair0_device *device) {
&aid);
if (aid == 0) r0=1;
if (aid == 1) r1=1;
if (aid == 2) r2=1;
if (aid == 3) r3=1;
}
if (r0==1 && r1==1) printf("Streaming started, returning to OAI\n");
if (r0==1 && r1==1 && r2==1 && r3==1) printf("Streaming started, returning to OAI\n");
else {
printf("Didn't get anything from one antenna port after %d packets %d,%d\n",Npackets,r0,r1);
printf("Didn't get anything from one antenna port after %d packets %d,%d,%d,%d\n",Npackets,r0,r1,r2,r3);
return(-1);
}
return(0);
}
uint32_t to_nrarfcn(int nr_bandP,
uint64_t dl_CarrierFreq,
uint8_t scs_index,
uint32_t bw);
int aw2s_oriinit(openair0_device *device) {
@@ -430,60 +540,65 @@ int aw2s_oriinit(openair0_device *device) {
*******************************************************************/
/* Prepare parameters */
ORI_ObjectTypeRef_s txTypeRef = { NULL, openair0_cfg->duplex_mode == duplex_mode_FDD ? ORI_ObjectType_TxEUtraFDD : ORI_ObjectType_TxEUtraTDD};
ORI_ObjectTypeRef_s txTypeRef = { NULL, openair0_cfg->duplex_mode == duplex_mode_FDD ?
(openair0_cfg->nr_flag == 0 ? ORI_ObjectType_TxEUtraFDD : ORI_ObjectType_TxNRFDD):
(openair0_cfg->nr_flag == 0 ? ORI_ObjectType_TxEUtraTDD : ORI_ObjectType_TxNRTDD)};
ORI_ObjectParams_u txParams;
ORI_ObjectParam_e txParamList[9];
ORI_Result_e txParamResult[9];
int num_txparams;
if (openair0_cfg->duplex_mode == duplex_mode_FDD) {
txParamList[0] = ORI_ObjectParam_SigPath_antPort;
txParamList[1] = ORI_ObjectParam_SigPath_axcW;
txParamList[2] = ORI_ObjectParam_SigPath_axcB;
txParamList[3] = ORI_ObjectParam_SigPath_chanBW;
txParamList[4] = ORI_ObjectParam_SigPath_earfcn;
txParamList[5] = ORI_ObjectParam_TxSigPath_maxTxPwr;
num_txparams = 6;
}
else {
txParamList[0] = ORI_ObjectParam_SigPath_antPort;
txParamList[1] = ORI_ObjectParam_SigPath_axcW;
txParamList[2] = ORI_ObjectParam_SigPath_axcB;
txParamList[3] = ORI_ObjectParam_SigPath_chanBW;
txParamList[4] = ORI_ObjectParam_SigPath_earfcn;
txParamList[5] = ORI_ObjectParam_TxSigPath_maxTxPwr;
txParamList[6] = ORI_ObjectParam_SigPath_tddULDLConfig;
txParamList[7] = ORI_ObjectParam_SigPath_tddSpecialSFConfig;
txParamList[8] = ORI_ObjectParam_TxSigPath_tddCPLengthDL;
num_txparams = 9;
}
txParamList[0] = ORI_ObjectParam_SigPath_antPort;
txParamList[1] = ORI_ObjectParam_SigPath_axcW;
txParamList[2] = ORI_ObjectParam_SigPath_axcB;
txParamList[3] = ORI_ObjectParam_SigPath_chanBW;
txParamList[4] = (openair0_cfg->nr_flag ==0) ? ORI_ObjectParam_SigPath_earfcn : ORI_ObjectParam_SigPath_AWS_arfcn;
txParamList[5] = ORI_ObjectParam_TxSigPath_maxTxPwr;
num_txparams = 6;
/* Create tx0 */
ORI_Object_s * tx0;
printf("AW2S: duplex_mode %d, tx_bw %f, rx_bw %f\n",openair0_cfg->duplex_mode,openair0_cfg->tx_bw,openair0_cfg->rx_bw);
if (openair0_cfg->duplex_mode == duplex_mode_FDD) {
if (openair0_cfg->duplex_mode == duplex_mode_FDD && openair0_cfg->nr_flag == 0) {
txParams.TxEUtraFDD.antPort = ORI_FindObject(ori, ORI_ObjectType_AntennaPort, 0, NULL);
txParams.TxEUtraFDD.axcW = 1;
txParams.TxEUtraFDD.axcB = 0;
txParams.TxEUtraFDD.chanBW = openair0_cfg->tx_bw/100e3;
txParams.TxEUtraFDD.earfcn = 3350;
txParams.TxEUtraFDD.maxTxPwr = -100;
txParams.TxEUtraTDD.earfcn = to_earfcn_DL_aw2s(-1,(long long int)openair0_cfg->tx_freq[0],txParams.TxEUtraTDD.chanBW);
txParams.TxEUtraFDD.maxTxPwr = 430-((int)openair0_cfg->tx_gain[0]*10);
}
else if (openair0_cfg->duplex_mode == duplex_mode_TDD) {
else if (openair0_cfg->duplex_mode == duplex_mode_FDD && openair0_cfg->nr_flag == 1) {
txParams.TxNRFDD.antPort = ORI_FindObject(ori, ORI_ObjectType_AntennaPort, 0, NULL);
txParams.TxNRFDD.axcW = 1;
txParams.TxNRFDD.axcB = 0;
txParams.TxNRFDD.chanBW = openair0_cfg->tx_bw/100e3;
txParams.TxNRFDD.AWS_arfcn = to_nrarfcn(openair0_cfg->nr_band,(long long int)openair0_cfg->tx_freq[0],openair0_cfg->nr_scs_for_raster,(uint32_t)openair0_cfg->tx_bw);
txParams.TxNRFDD.maxTxPwr = 430-((int)openair0_cfg->tx_gain[0]*10);
}
else if (openair0_cfg->duplex_mode == duplex_mode_TDD && openair0_cfg->nr_flag == 0) {
txParams.TxEUtraTDD.antPort = ORI_FindObject(ori, ORI_ObjectType_AntennaPort, 0, NULL);
txParams.TxEUtraTDD.axcW = 1;
txParams.TxEUtraTDD.axcB = 0;
txParams.TxEUtraTDD.chanBW = openair0_cfg->tx_bw/100e3;
txParams.TxEUtraTDD.earfcn = to_earfcn_DL_aw2s(38,(long long int)openair0_cfg->tx_freq[0],txParams.TxEUtraTDD.chanBW);
txParams.TxEUtraTDD.earfcn = to_earfcn_DL_aw2s(-1,(long long int)openair0_cfg->tx_freq[0],txParams.TxEUtraTDD.chanBW);
txParams.TxEUtraTDD.maxTxPwr = 430-((int)openair0_cfg->tx_gain[0]*10);
txParams.TxEUtraTDD.tddULDLConfig = 1;
txParams.TxEUtraTDD.tddSpecialSFConfig = 0;
txParams.TxEUtraTDD.tddCPLengthDL = ORI_tddCPLength_Normal;
printf("AW2S: Configuring for TDD, EARFCN %u, Power %d, BW %d\n",
printf("AW2S: Configuring for LTE TDD, EARFCN %u, Power %d, BW %d\n",
txParams.TxEUtraTDD.earfcn,txParams.TxEUtraTDD.maxTxPwr,txParams.TxEUtraTDD.chanBW);
}
else if (openair0_cfg->duplex_mode == duplex_mode_TDD && openair0_cfg->nr_flag == 1) {
txParams.TxNRTDD.antPort = ORI_FindObject(ori, ORI_ObjectType_AntennaPort, 0, NULL);
txParams.TxNRTDD.axcW = 1;
txParams.TxNRTDD.axcB = 0;
txParams.TxNRTDD.chanBW = openair0_cfg->tx_bw/100e3;
txParams.TxNRTDD.AWS_arfcn = to_nrarfcn(openair0_cfg->nr_band,(long long int)openair0_cfg->tx_freq[0],openair0_cfg->nr_scs_for_raster,(uint32_t)openair0_cfg->tx_bw);
txParams.TxNRTDD.maxTxPwr = 430-((int)openair0_cfg->tx_gain[0]*10);
printf("AW2S: Configuring for NR TDD, NRARFCN %u, Power %d, BW %d\n",
txParams.TxNRTDD.AWS_arfcn,txParams.TxNRTDD.maxTxPwr,txParams.TxNRTDD.chanBW);
}
else {
aw2s_oricleanup(device);
return -1;
@@ -491,37 +606,78 @@ int aw2s_oriinit(openair0_device *device) {
result = ORI_ObjectCreation(ori, txTypeRef, txParams, txParamList, num_txparams, txParamResult, &tx0, &RE_result);
if(RE_result != ORI_Result_SUCCESS)
{
printf("ORI_ObjectCreation (txParams0.TxEUtraFDD/TDD) failed with error: %s (%s,%s,%s,%s,%s,%s,%s,%s,%s\n", ORI_Result_Print(result),
printf("ORI_ObjectCreation (txParams0.TxEUtra/NR/FDD/TDD) failed with error: %s (%s,%s,%s,%s,%s,%s\n", ORI_Result_Print(RE_result),
ORI_Result_Print(txParamResult[0]),
ORI_Result_Print(txParamResult[1]),
ORI_Result_Print(txParamResult[2]),
ORI_Result_Print(txParamResult[3]),
ORI_Result_Print(txParamResult[4]),
ORI_Result_Print(txParamResult[5]),
ORI_Result_Print(txParamResult[6]),
ORI_Result_Print(txParamResult[7]),
ORI_Result_Print(txParamResult[8]));
ORI_Result_Print(txParamResult[5]));
aw2s_oricleanup(device);
return -1;
}
printf("ORI_ObjectCreation (txParams0.TxEUtraFDD/TDD): %s\n", ORI_Result_Print(RE_result));
printf("ORI_ObjectCreation (txParams0.TxEUtra/NR/FDD/TDD): %s\n", ORI_Result_Print(RE_result));
/* Create tx1 */
if (openair0_cfg->tx_num_channels > 1) {
ORI_Object_s * tx1;
if (openair0_cfg->duplex_mode ==duplex_mode_FDD) txParams.TxEUtraFDD.antPort = ORI_FindObject(ori, ORI_ObjectType_AntennaPort, 1, NULL);
else txParams.TxEUtraTDD.antPort = ORI_FindObject(ori, ORI_ObjectType_AntennaPort, 1, NULL);
if (openair0_cfg->duplex_mode == duplex_mode_FDD && openair0_cfg->nr_flag == 0)
txParams.TxEUtraFDD.antPort = ORI_FindObject(ori, ORI_ObjectType_AntennaPort, 1, NULL);
else if (openair0_cfg->duplex_mode == duplex_mode_FDD && openair0_cfg->nr_flag == 1)
txParams.TxNRFDD.antPort = ORI_FindObject(ori, ORI_ObjectType_AntennaPort, 1, NULL);
else if (openair0_cfg->duplex_mode == duplex_mode_TDD && openair0_cfg->nr_flag == 0)
txParams.TxEUtraTDD.antPort = ORI_FindObject(ori, ORI_ObjectType_AntennaPort, 1, NULL);
else if (openair0_cfg->duplex_mode == duplex_mode_TDD && openair0_cfg->nr_flag == 1)
txParams.TxNRTDD.antPort = ORI_FindObject(ori, ORI_ObjectType_AntennaPort, 1, NULL);
result = ORI_ObjectCreation(ori, txTypeRef, txParams, txParamList, num_txparams, txParamResult, &tx1, &RE_result);
if(RE_result != ORI_Result_SUCCESS)
{
printf("ORI_ObjectCreation (txParams1.TxEUtraFDD/TDD) failed with error: %s\n", ORI_Result_Print(result));
printf("ORI_ObjectCreation (txParams1.TxEUtra/NR/FDD/TDD) failed with error: %s\n", ORI_Result_Print(result));
aw2s_oricleanup(device);
return -1;
}
printf("ORI_ObjectCreation (txParams1.TxEUtraFDD/TDD): %s\n", ORI_Result_Print(RE_result));
printf("ORI_ObjectCreation (txParams1.TxEUtra/NR/FDD/TDD): %s\n", ORI_Result_Print(RE_result));
}
if (openair0_cfg->tx_num_channels > 2) {
ORI_Object_s * tx2;
if (openair0_cfg->duplex_mode == duplex_mode_FDD && openair0_cfg->nr_flag == 0)
txParams.TxEUtraFDD.antPort = ORI_FindObject(ori, ORI_ObjectType_AntennaPort, 2, NULL);
else if (openair0_cfg->duplex_mode == duplex_mode_FDD && openair0_cfg->nr_flag == 1)
txParams.TxNRFDD.antPort = ORI_FindObject(ori, ORI_ObjectType_AntennaPort, 2, NULL);
else if (openair0_cfg->duplex_mode == duplex_mode_TDD && openair0_cfg->nr_flag == 0)
txParams.TxEUtraTDD.antPort = ORI_FindObject(ori, ORI_ObjectType_AntennaPort, 2, NULL);
else if (openair0_cfg->duplex_mode == duplex_mode_TDD && openair0_cfg->nr_flag == 1)
txParams.TxNRTDD.antPort = ORI_FindObject(ori, ORI_ObjectType_AntennaPort, 2, NULL);
result = ORI_ObjectCreation(ori, txTypeRef, txParams, txParamList, num_txparams, txParamResult, &tx2, &RE_result);
if(RE_result != ORI_Result_SUCCESS)
{
printf("ORI_ObjectCreation (txParams2.TxEUtra/NR/FDD/TDD) failed with error: %s\n", ORI_Result_Print(result));
aw2s_oricleanup(device);
return -1;
}
printf("ORI_ObjectCreation (txParams2.TxEUtra/NR/FDD/TDD): %s\n", ORI_Result_Print(RE_result));
}
if (openair0_cfg->tx_num_channels == 4) {
ORI_Object_s * tx3;
if (openair0_cfg->duplex_mode == duplex_mode_FDD && openair0_cfg->nr_flag == 0)
txParams.TxEUtraFDD.antPort = ORI_FindObject(ori, ORI_ObjectType_AntennaPort, 3, NULL);
else if (openair0_cfg->duplex_mode == duplex_mode_FDD && openair0_cfg->nr_flag == 1)
txParams.TxNRFDD.antPort = ORI_FindObject(ori, ORI_ObjectType_AntennaPort, 3, NULL);
else if (openair0_cfg->duplex_mode == duplex_mode_TDD && openair0_cfg->nr_flag == 0)
txParams.TxEUtraTDD.antPort = ORI_FindObject(ori, ORI_ObjectType_AntennaPort, 3, NULL);
else if (openair0_cfg->duplex_mode == duplex_mode_TDD && openair0_cfg->nr_flag == 1)
txParams.TxNRTDD.antPort = ORI_FindObject(ori, ORI_ObjectType_AntennaPort, 3, NULL);
result = ORI_ObjectCreation(ori, txTypeRef, txParams, txParamList, num_txparams, txParamResult, &tx3, &RE_result);
if(RE_result != ORI_Result_SUCCESS)
{
printf("ORI_ObjectCreation (txParams3.TxEUtra/NRFDD/TDD) failed with error: %s\n", ORI_Result_Print(result));
aw2s_oricleanup(device);
return -1;
}
printf("ORI_ObjectCreation (txParams3.TxEUtra/NRFDD/TDD): %s\n", ORI_Result_Print(RE_result));
}
/*******************************************************************
@@ -529,42 +685,56 @@ int aw2s_oriinit(openair0_device *device) {
*******************************************************************/
/* Prepare parameters */
ORI_ObjectTypeRef_s rxTypeRef = { NULL, openair0_cfg->duplex_mode == duplex_mode_FDD ? ORI_ObjectType_RxEUtraFDD : ORI_ObjectType_RxEUtraTDD};
ORI_ObjectParams_u rxParams,rxParams1;
ORI_ObjectParam_e rxParamList[8] = { ORI_ObjectParam_SigPath_antPort, ORI_ObjectParam_SigPath_axcW, ORI_ObjectParam_SigPath_axcB,
ORI_ObjectParam_SigPath_chanBW, ORI_ObjectParam_SigPath_earfcn };
ORI_Result_e rxParamResult[8];
ORI_ObjectTypeRef_s rxTypeRef = { NULL, openair0_cfg->duplex_mode == duplex_mode_FDD ?
(openair0_cfg->nr_flag == 0 ? ORI_ObjectType_RxEUtraFDD : ORI_ObjectType_RxNRFDD ) :
(openair0_cfg->nr_flag == 0 ? ORI_ObjectType_RxEUtraTDD : ORI_ObjectType_RxNRTDD)};
ORI_ObjectParams_u rxParams;
ORI_ObjectParam_e rxParamList[5] = { ORI_ObjectParam_SigPath_antPort, ORI_ObjectParam_SigPath_axcW, ORI_ObjectParam_SigPath_axcB,
ORI_ObjectParam_SigPath_chanBW,
openair0_cfg->nr_flag == 0 ? ORI_ObjectParam_SigPath_earfcn : ORI_ObjectParam_SigPath_AWS_arfcn};
ORI_Result_e rxParamResult[5];
int num_rxparams = 5;
if (openair0_cfg->duplex_mode == duplex_mode_TDD) {
rxParamList[5] = ORI_ObjectParam_SigPath_tddULDLConfig;
rxParamList[6] = ORI_ObjectParam_SigPath_tddSpecialSFConfig;
rxParamList[7] = ORI_ObjectParam_RxSigPath_tddCPLengthUL;
num_rxparams = 8;
}
/* Create rx0 */
ORI_Object_s * rx0;
if (openair0_cfg->duplex_mode == duplex_mode_FDD) {
if (openair0_cfg->duplex_mode == duplex_mode_FDD && openair0_cfg->nr_flag == 0) {
rxParams.RxEUtraFDD.antPort = ORI_FindObject(ori, ORI_ObjectType_AntennaPort, 0, NULL);
rxParams.RxEUtraFDD.axcW = 1;
rxParams.RxEUtraFDD.axcB = 0;
rxParams.RxEUtraFDD.chanBW = 200;
rxParams.RxEUtraFDD.earfcn = 21350;
rxParams.RxEUtraFDD.chanBW = txParams.TxEUtraFDD.chanBW;
rxParams.RxEUtraFDD.earfcn = to_earfcn_UL_aw2s(-1,(long long int)openair0_cfg->rx_freq[0],txParams.TxEUtraFDD.chanBW);
result = ORI_ObjectCreation(ori, rxTypeRef, rxParams, rxParamList, num_rxparams, rxParamResult, &rx0, &RE_result);
}
else {
else if (openair0_cfg->duplex_mode == duplex_mode_FDD && openair0_cfg->nr_flag == 1) {
rxParams.RxNRFDD.antPort = ORI_FindObject(ori, ORI_ObjectType_AntennaPort, 0, NULL);
rxParams.RxNRFDD.axcW = 1;
rxParams.RxNRFDD.axcB = 0;
rxParams.RxNRFDD.chanBW = txParams.TxNRFDD.chanBW;
rxParams.RxNRFDD.AWS_arfcn = to_nrarfcn(openair0_cfg->nr_band,(long long int)openair0_cfg->rx_freq[0],openair0_cfg->nr_scs_for_raster,openair0_cfg->rx_bw);
result = ORI_ObjectCreation(ori, rxTypeRef, rxParams, rxParamList, num_rxparams, rxParamResult, &rx0, &RE_result);
}
else if (openair0_cfg->duplex_mode == duplex_mode_TDD && openair0_cfg->nr_flag == 0) {
rxParams.RxEUtraTDD.antPort = ORI_FindObject(ori, ORI_ObjectType_AntennaPort, 0, NULL);
rxParams.RxEUtraTDD.axcW = 1;
rxParams.RxEUtraTDD.axcB = 0;
rxParams.RxEUtraTDD.chanBW = txParams.TxEUtraTDD.chanBW;
rxParams.RxEUtraTDD.earfcn = txParams.TxEUtraTDD.earfcn;
rxParams.RxEUtraTDD.tddULDLConfig = 1;
rxParams.RxEUtraTDD.tddSpecialSFConfig = 1;
rxParams.RxEUtraTDD.tddCPLengthUL = ORI_tddCPLength_Normal;
printf("AW2S: Creating RX0 for EARFCN %d\n",rxParams.RxEUtraTDD.earfcn);
result = ORI_ObjectCreation(ori, rxTypeRef, rxParams, rxParamList, num_rxparams, rxParamResult, &rx0, &RE_result);
}
else if (openair0_cfg->duplex_mode == duplex_mode_TDD && openair0_cfg->nr_flag == 1) {
rxParams.RxNRTDD.antPort = ORI_FindObject(ori, ORI_ObjectType_AntennaPort, 0, NULL);
rxParams.RxNRTDD.axcW = 1;
rxParams.RxNRTDD.axcB = 0;
rxParams.RxNRTDD.chanBW = txParams.TxNRTDD.chanBW;
rxParams.RxNRTDD.AWS_arfcn = txParams.TxNRTDD.AWS_arfcn;
printf("AW2S: Creating RX0 for NRARFCN %d\n",rxParams.RxNRTDD.AWS_arfcn);
result = ORI_ObjectCreation(ori, rxTypeRef, rxParams, rxParamList, num_rxparams, rxParamResult, &rx0, &RE_result);
}
if(result != ORI_Result_SUCCESS)
@@ -573,27 +743,78 @@ int aw2s_oriinit(openair0_device *device) {
aw2s_oricleanup(device);
return -1;
}
printf("ORI_ObjectCreation (rxParams0.RxEUtraFDD/TDD): %s\n", ORI_Result_Print(RE_result));
printf("ORI_ObjectCreation (rxParams0.RxEUtra/NR/FDD/TDD): %s\n", ORI_Result_Print(RE_result));
if (openair0_cfg->rx_num_channels > 1) {
/* Create rx1 */
ORI_Object_s * rx1;
memcpy((void*)&rxParams1,(void*)&rxParams,sizeof(rxParams));
if (openair0_cfg->duplex_mode == duplex_mode_FDD) rxParams1.RxEUtraFDD.antPort = ORI_FindObject(ori, ORI_ObjectType_AntennaPort, 1, NULL);
else rxParams1.RxEUtraTDD.antPort = ORI_FindObject(ori, ORI_ObjectType_AntennaPort, 1, NULL);
if (openair0_cfg->duplex_mode == duplex_mode_FDD && openair0_cfg->nr_flag == 0)
rxParams.RxEUtraFDD.antPort = ORI_FindObject(ori, ORI_ObjectType_AntennaPort, 1, NULL);
else if (openair0_cfg->duplex_mode == duplex_mode_FDD && openair0_cfg->nr_flag == 1)
rxParams.RxNRFDD.antPort = ORI_FindObject(ori, ORI_ObjectType_AntennaPort, 1, NULL);
else if (openair0_cfg->duplex_mode == duplex_mode_TDD && openair0_cfg->nr_flag == 0)
rxParams.RxEUtraTDD.antPort = ORI_FindObject(ori, ORI_ObjectType_AntennaPort, 1, NULL);
else if (openair0_cfg->duplex_mode == duplex_mode_TDD && openair0_cfg->nr_flag == 1)
rxParams.RxNRTDD.antPort = ORI_FindObject(ori, ORI_ObjectType_AntennaPort, 1, NULL);
result = ORI_ObjectCreation(ori, rxTypeRef, rxParams1, rxParamList, num_rxparams, rxParamResult, &rx1, &RE_result);
result = ORI_ObjectCreation(ori, rxTypeRef, rxParams, rxParamList, num_rxparams, rxParamResult, &rx1, &RE_result);
if(result != ORI_Result_SUCCESS)
{
printf("ORI_ObjectCreation (rxParams1.RxEUtraFDD/TDD) failed with error: %s\n", ORI_Result_Print(result));
printf("ORI_ObjectCreation (rxParams1.RxEUtra/NR/FDD/TDD) failed with error: %s\n", ORI_Result_Print(result));
aw2s_oricleanup(device);
return -1;
}
printf("ORI_ObjectCreation (rxParams1.RxEUtraFDD/TDD): %s\n", ORI_Result_Print(RE_result));
printf("ORI_ObjectCreation (rxParams1.RxEUtra/NR/FDD/TDD): %s\n", ORI_Result_Print(RE_result));
}
if (openair0_cfg->rx_num_channels > 2) {
/* Create rx2 */
ORI_Object_s * rx2;
if (openair0_cfg->duplex_mode == duplex_mode_FDD && openair0_cfg->nr_flag == 0)
rxParams.RxEUtraFDD.antPort = ORI_FindObject(ori, ORI_ObjectType_AntennaPort, 2, NULL);
else if (openair0_cfg->duplex_mode == duplex_mode_FDD && openair0_cfg->nr_flag == 1)
rxParams.RxNRFDD.antPort = ORI_FindObject(ori, ORI_ObjectType_AntennaPort, 2, NULL);
else if (openair0_cfg->duplex_mode == duplex_mode_TDD && openair0_cfg->nr_flag == 0)
rxParams.RxEUtraTDD.antPort = ORI_FindObject(ori, ORI_ObjectType_AntennaPort, 2, NULL);
else if (openair0_cfg->duplex_mode == duplex_mode_TDD && openair0_cfg->nr_flag == 1)
rxParams.RxNRTDD.antPort = ORI_FindObject(ori, ORI_ObjectType_AntennaPort, 2, NULL);
result = ORI_ObjectCreation(ori, rxTypeRef, rxParams, rxParamList, num_rxparams, rxParamResult, &rx2, &RE_result);
if(result != ORI_Result_SUCCESS)
{
printf("ORI_ObjectCreation (rxParams2.RxEUtra/NR/FDD/TDD) failed with error: %s\n", ORI_Result_Print(result));
aw2s_oricleanup(device);
return -1;
}
printf("ORI_ObjectCreation (rxParams2.RxEUtra/NR/FDD/TDD): %s\n", ORI_Result_Print(RE_result));
}
if (openair0_cfg->rx_num_channels > 3) {
/* Create rx3 */
ORI_Object_s * rx3;
if (openair0_cfg->duplex_mode == duplex_mode_FDD && openair0_cfg->nr_flag == 0)
rxParams.RxEUtraFDD.antPort = ORI_FindObject(ori, ORI_ObjectType_AntennaPort, 3, NULL);
else if (openair0_cfg->duplex_mode == duplex_mode_FDD && openair0_cfg->nr_flag == 1)
rxParams.RxNRFDD.antPort = ORI_FindObject(ori, ORI_ObjectType_AntennaPort, 3, NULL);
else if (openair0_cfg->duplex_mode == duplex_mode_TDD && openair0_cfg->nr_flag == 0)
rxParams.RxEUtraTDD.antPort = ORI_FindObject(ori, ORI_ObjectType_AntennaPort, 3, NULL);
else if (openair0_cfg->duplex_mode == duplex_mode_TDD && openair0_cfg->nr_flag == 1)
rxParams.RxNRTDD.antPort = ORI_FindObject(ori, ORI_ObjectType_AntennaPort, 3, NULL);
result = ORI_ObjectCreation(ori, rxTypeRef, rxParams, rxParamList, num_rxparams, rxParamResult, &rx3, &RE_result);
if(result != ORI_Result_SUCCESS)
{
printf("ORI_ObjectCreation (rxParams3.RxEUtra/NR/FDD/TDD) failed with error: %s\n", ORI_Result_Print(result));
aw2s_oricleanup(device);
return -1;
}
printf("ORI_ObjectCreation (rxParams3.RxEUtra/NR/FDD/TDD): %s\n", ORI_Result_Print(RE_result));
}
/* Create link */
ORI_ObjectParams_u linkParams;
@@ -609,14 +830,14 @@ int aw2s_oriinit(openair0_device *device) {
result = ORI_ObjectParamModify(ori,link,linkParams,linkParamList,3,linkParamResult,&RE_result);
if(result != ORI_Result_SUCCESS)
{
printf("ORI_ObjectParamModify (linkParams) failed with error: %s\n", ORI_Result_Print(result));
printf("ORI_ObjectParamModify (linkParams) failed with error: %s\n", ORI_Result_Print(RE_result));
aw2s_oricleanup(device);
return -1;
}
result = ORI_ObjectStateModification(ori, link, ORI_AST_Locked, &RE_result);
if(result != ORI_Result_SUCCESS)
{
printf("ORI_ObjectStateModify failed with error: %s\n", ORI_Result_Print(result));
printf("ORI_ObjectStateModify failed with error: %s\n", ORI_Result_Print(RE_result));
aw2s_oricleanup(device);
return -1;
}
@@ -632,7 +853,7 @@ int aw2s_oriinit(openair0_device *device) {
result = ORI_ObjectParamReport(ori, NULL, 0, ORI_ObjectParam_All, &RE_result);
if(result != ORI_Result_SUCCESS)
{
printf("ORI_ObjectParamReport failed with error: %s\n", ORI_Result_Print(result));
printf("ORI_ObjectParamReport failed with error: %s\n", ORI_Result_Print(RE_result));
aw2s_oricleanup(device);
return -1;
}
@@ -651,7 +872,7 @@ int aw2s_oriinit(openair0_device *device) {
result = ORI_ObjectStateReport(ori, NULL, 0, ORI_StateType_All, ORI_EventDrivenReport_True, &RE_result);
if(result != ORI_Result_SUCCESS)
{
printf("ORI_ObjectStateReport failed with error: %s\n", ORI_Result_Print(result));
printf("ORI_ObjectStateReport failed with error: %s\n", ORI_Result_Print(RE_result));
aw2s_oricleanup(device);
return -1;
}
@@ -675,7 +896,7 @@ int aw2s_oriinit(openair0_device *device) {
result = ORI_ObjectFaultReport(ori, NULL, 0, ORI_EventDrivenReport_True, &RE_result);
if(result != ORI_Result_SUCCESS)
{
printf("ORI_ObjectFaultReport failed with error: %s\n", ORI_Result_Print(result));
printf("ORI_ObjectFaultReport failed with error: %s\n", ORI_Result_Print(RE_result));
aw2s_oricleanup(device);
return -1;
}
targets/ARCH/AW2SORI/ori.h
+104 -9
View File
@@ -2,8 +2,8 @@
* @file ori.h
* @brief Open Radio Interface (ORI) C library header file.
* @author AW2S (http://www.aw2s.com)
* @version 1.6
* @date July 29, 2019
* @version 1.8
* @date January 18, 2022
*
* This file is the AW2S REC ORI C library header, and contains all necessary
* functions prototypes, enumerations, data structures and type definitions
@@ -14,7 +14,7 @@
#define ORI_H_
#define ORILIB_VERSION_MAJOR 1
#define ORILIB_VERSION_MINOR 6
#define ORILIB_VERSION_MINOR 8
#include <stdint.h>
@@ -144,10 +144,14 @@ typedef enum
ORI_ObjectType_TxEUtraFDD, /**< */
ORI_ObjectType_TxEUtraTDD, /**< */
ORI_ObjectType_TxGSM, /**< */
ORI_ObjectType_TxNRFDD, /**< */
ORI_ObjectType_TxNRTDD, /**< */
ORI_ObjectType_RxUtra, /**< */
ORI_ObjectType_RxEUtraFDD, /**< */
ORI_ObjectType_RxEUtraTDD, /**< */
ORI_ObjectType_RxGSM, /**< */
ORI_ObjectType_RxNRFDD, /**< */
ORI_ObjectType_RxNRTDD, /**< */
ORI_ObjectType_ORILink, /**< */
ORI_ObjectType_ExternalEventPort, /**< */
ORI_ObjectType_AISGPort, /**< */
@@ -223,6 +227,7 @@ typedef enum
ORI_ObjectParam_SigPath_AWS_enableCompBitChange, /**< */
ORI_ObjectParam_SigPath_AWS_measuredPwr, /**< */
ORI_ObjectParam_SigPath_AWS_axcIncr, /**< */
ORI_ObjectParam_SigPath_AWS_arfcn, /**< */
ORI_ObjectParam_TxSigPath_t2a, /**< */
ORI_ObjectParam_TxSigPath_maxTxPwr, /**< */
ORI_ObjectParam_TxSigPath_dlCalRE, /**< */
@@ -252,12 +257,12 @@ typedef enum
ORI_ObjectParam_ORILink_AWS_localMAC, /**< */
ORI_ObjectParam_ORILink_AWS_remoteMAC, /**< */
ORI_ObjectParam_ORILink_AWS_t14, /**< */
ORI_ObjectParam_ORILink_AWS_sfpTxPow, /**< */
ORI_ObjectParam_ORILink_AWS_sfpRxPow, /**< */
ORI_ObjectParam_ORILink_AWS_remoteIP, /**< */
ORI_ObjectParam_ORILink_AWS_localIP, /**< */
ORI_ObjectParam_ORILink_AWS_remoteUdpPort, /**< */
ORI_ObjectParam_ORILink_AWS_localUdpPort, /**< */
ORI_ObjectParam_ORILink_AWS_sfpTxPow, /**< */
ORI_ObjectParam_ORILink_AWS_sfpRxPow, /**< */
ORI_ObjectParam_AISGPort_busPowerEnable, /**< */
ORI_ObjectParam_AISGALD_deviceType, /**< */
ORI_ObjectParam_AISGALD_UID, /**< */
@@ -1146,6 +1151,50 @@ typedef struct
ORI_Boolean_e AWS_enPeakCancel; /**< RW-Locked. AW2S Vendor specific: Peak-Cancellation CFR enablement. */
} ORI_ObjectParams_TxSigPathGSM_s;
/**
* @struct ORI_ObjectParams_TxSigPathNRFDD_s
* @brief Structure containing the parameters of a TxSigPath NRFDD object.
*/
typedef struct
{
uint16_t chanBW; /**< RW-Locked. Channel bandwith in MHz/10. */
uint16_t dlCalREMax; /**< RO. Max possible buffer in RE for DL timing calibration in Tc/16.*/
uint32_t t2a; /**< RO. RE time delay. */
uint16_t dlCalRE; /**< RW-Locked. Time delay to enable DL timing calibration in Tc/16. */
int16_t maxTxPwr; /**< RW. Max tx power for this path, unit is dBm/10 (e.g. 400 for 40 dBm). */
uint8_t axcW; /**< RW-Locked. AxC W parameter. */
uint8_t axcB; /**< RW-Locked. AxC B parameter. */
ORI_Object_s * oriLink; /**< RW-Locked. ORI Link on which the AxC is mapped. */
ORI_Object_s * antPort; /**< RW-Locked. Reference Antenna port for this signal. */
ORI_Boolean_e AWS_enableCompRateChange; /**< RW-Locked. AW2S Vendor specific: Enable IQ data compression sample rate change. */
int16_t AWS_measuredPwr; /**< RO. AW2S Vendor specific: Measured Tx power for this path, unit is dBm/10 (e.g. 400 for 40 dBm). */
uint16_t AWS_axcIncr; /**< RW-Locked. AW2S Vendor specific: AxC increment for each sample, 0 means auto (= packed, no interleaving). */
ORI_Boolean_e AWS_enPeakCancel; /**< RW-Locked. AW2S Vendor specific: Peak-Cancellation CFR enablement. */
uint32_t AWS_arfcn; /**< RW-Locked. ARFCN of the NR carrier. */
} ORI_ObjectParams_TxSigPathNRFDD_s;
/**
* @struct ORI_ObjectParams_TxSigPathNRTDD_s
* @brief Structure containing the parameters of a TxSigPath NRTDD object.
*/
typedef struct
{
uint16_t chanBW; /**< RW-Locked. Channel bandwith in MHz/10. */
uint16_t dlCalREMax; /**< RO. Max possible buffer in RE for DL timing calibration in Tc/16.*/
uint32_t t2a; /**< RO. RE time delay. */
uint16_t dlCalRE; /**< RW-Locked. Time delay to enable DL timing calibration in Tc/16. */
int16_t maxTxPwr; /**< RW. Max tx power for this path, unit is dBm/10 (e.g. 400 for 40 dBm). */
uint8_t axcW; /**< RW-Locked. AxC W parameter. */
uint8_t axcB; /**< RW-Locked. AxC B parameter. */
ORI_Object_s * oriLink; /**< RW-Locked. ORI Link on which the AxC is mapped. */
ORI_Object_s * antPort; /**< RW-Locked. Reference Antenna port for this signal. */
ORI_Boolean_e AWS_enableCompRateChange; /**< RW-Locked. AW2S Vendor specific: Enable IQ data compression sample rate change. */
int16_t AWS_measuredPwr; /**< RO. AW2S Vendor specific: Measured Tx power for this path, unit is dBm/10 (e.g. 400 for 40 dBm). */
uint16_t AWS_axcIncr; /**< RW-Locked. AW2S Vendor specific: AxC increment for each sample, 0 means auto (= packed, no interleaving). */
ORI_Boolean_e AWS_enPeakCancel; /**< RW-Locked. AW2S Vendor specific: Peak-Cancellation CFR enablement. */
uint32_t AWS_arfcn; /**< RW-Locked. ARFCN of the NR carrier. */
} ORI_ObjectParams_TxSigPathNRTDD_s;
/**
* @struct ORI_ObjectParams_RxSigPathUtra_s
* @brief Structure containing the parameters of a RxSigPath UTRAFDD object.
@@ -1239,6 +1288,48 @@ typedef struct
uint16_t AWS_axcIncr; /**< RW-Locked. AW2S Vendor specific: AxC increment for each sample, 0 means auto (= packed, no interleaving). */
} ORI_ObjectParams_RxSigPathGSM_s;
/**
* @struct ORI_ObjectParams_RxSigPathNRFDD_s
* @brief Structure containing the parameters of a RxSigPath NRFDD object.
*
*/
typedef struct
{
uint16_t chanBW; /**< RW-Locked. Channel bandwith in MHz/10. */
uint16_t ulCalREMax; /**< RO. Max possible buffer in RE for UL timing calibration in Tc/2.*/
uint32_t ta3; /**< RO. RE time delay. */
uint16_t ulCalRE; /**< RW-Locked. Time delay to enable UL timing calibration in Tc/2. */
uint8_t axcW; /**< RW-Locked. AxC W parameter. */
uint8_t axcB; /**< RW-Locked. AxC B parameter. */
ORI_Object_s * oriLink; /**< RW-Locked. ORI Link on which the AxC is mapped. */
ORI_Object_s * antPort; /**< RW-Locked. Reference Antenna port for this signal. */
ORI_Boolean_e AWS_enableCompRateChange; /**< RW-Locked. AW2S Vendor specific: Enable IQ data compression sample rate change. */
int16_t AWS_measuredPwr; /**< RO. AW2S Vendor specific: Measured Rx power for this path, unit is dBm/10 (e.g. -650 for -65 dBm). */
uint16_t AWS_axcIncr; /**< RW-Locked. AW2S Vendor specific: AxC increment for each sample, 0 means auto (= packed, no interleaving). */
uint32_t AWS_arfcn; /**< RW-Locked. ARFCN of the NR carrier. */
} ORI_ObjectParams_RxSigPathNRFDD_s;
/**
* @struct ORI_ObjectParams_RxSigPathNRTDD_s
* @brief Structure containing the parameters of a RxSigPath NRTDD object.
*
*/
typedef struct
{
uint16_t chanBW; /**< RW-Locked. Channel bandwith in MHz/10. */
uint16_t ulCalREMax; /**< RO. Max possible buffer in RE for UL timing calibration in Tc/2.*/
uint32_t ta3; /**< RO. RE time delay. */
uint16_t ulCalRE; /**< RW-Locked. Time delay to enable UL timing calibration in Tc/2. */
uint8_t axcW; /**< RW-Locked. AxC W parameter. */
uint8_t axcB; /**< RW-Locked. AxC B parameter. */
ORI_Object_s * oriLink; /**< RW-Locked. ORI Link on which the AxC is mapped. */
ORI_Object_s * antPort; /**< RW-Locked. Reference Antenna port for this signal. */
ORI_Boolean_e AWS_enableCompRateChange; /**< RW-Locked. AW2S Vendor specific: Enable IQ data compression sample rate change. */
int16_t AWS_measuredPwr; /**< RO. AW2S Vendor specific: Measured Rx power for this path, unit is dBm/10 (e.g. -650 for -65 dBm). */
uint16_t AWS_axcIncr; /**< RW-Locked. AW2S Vendor specific: AxC increment for each sample, 0 means auto (= packed, no interleaving). */
uint32_t AWS_arfcn; /**< RW-Locked. ARFCN of the NR carrier. */
} ORI_ObjectParams_RxSigPathNRTDD_s;
/**
* @struct ORI_ObjectParams_ORILink_s
* @brief Structure containing the parameters of an ORI Link object.
@@ -1258,12 +1349,12 @@ typedef struct
uint8_t AWS_localMAC[6]; /**< R0. AW2S Vendor specific: Local MAC address of the ORI link. */
uint8_t AWS_remoteMAC[6]; /**< RW. AW2S Vendor specific: Remote MAC address of the ORI link. */
uint32_t AWS_t14; /**< RO. AW2S Vendor specific: CPRI time delay component. */
uint8_t AWS_remoteIP[4]; /**< RW. AW2S Vendor specific: REC IP for ECPRI Ethernet frame */
uint8_t AWS_localIP[4]; /**< R0. AW2S Vendor specific: RE IP for ECPRI Ethernet frame */
uint16_t AWS_remoteUdpPort; /**< RW. AW2S Vendor specific: REC Udp Port for ECPRI Ethernet frame */
uint16_t AWS_localUdpPort; /**< R0. AW2S Vendor specific: RE Udp Port for ECPRI Ethernet frame */
uint32_t AWS_sfpTxPow; /**< RO. AW2S Vendor specific: SFP Tx power. */
uint32_t AWS_sfpRxPow; /**< RO. AW2S Vendor specific: SFP Rx power. */
uint8_t AWS_remoteIP[4]; /**< RW. AW2S Vendor specific: IP of REC for ECPRI Ethernet frame */
uint8_t AWS_localIP[4]; /**< RW. AW2S Vendor specific: IP of RE for ECPRI Ethernet frame */
uint16_t AWS_remoteUdpPort; /**< RW. AW2S Vendor specific: UDP port of REC for ECPRI Ethernet frame */
uint16_t AWS_localUdpPort; /**< RO. AW2S Vendor specific: UDP port of RE for ECPRI Ethernet frame */
} ORI_ObjectParams_ORILink_s;
/**
@@ -1393,10 +1484,14 @@ typedef union
ORI_ObjectParams_TxSigPathEUtraFDD_s TxEUtraFDD; /**< Parameters for ::ORI_ObjectType_TxEUtraFDD. */
ORI_ObjectParams_TxSigPathEUtraTDD_s TxEUtraTDD; /**< Parameters for ::ORI_ObjectType_TxEUtraTDD. */
ORI_ObjectParams_TxSigPathGSM_s TxGSM; /**< Parameters for ::ORI_ObjectType_TxGSM. */
ORI_ObjectParams_TxSigPathNRFDD_s TxNRFDD; /**< Parameters for ::ORI_ObjectType_TxNRFDD. */
ORI_ObjectParams_TxSigPathNRTDD_s TxNRTDD; /**< Parameters for ::ORI_ObjectType_TxNRTDD. */
ORI_ObjectParams_RxSigPathUtra_s RxUtra; /**< Parameters for ::ORI_ObjectType_RxUtra. */
ORI_ObjectParams_RxSigPathEUtraFDD_s RxEUtraFDD; /**< Parameters for ::ORI_ObjectType_RxEUtraFDD. */
ORI_ObjectParams_RxSigPathEUtraTDD_s RxEUtraTDD; /**< Parameters for ::ORI_ObjectType_RxEUtraTDD. */
ORI_ObjectParams_RxSigPathGSM_s RxGSM; /**< Parameters for ::ORI_ObjectType_RxGSM. */
ORI_ObjectParams_RxSigPathNRFDD_s RxNRFDD; /**< Parameters for ::ORI_ObjectType_RxNRFDD. */
ORI_ObjectParams_RxSigPathNRTDD_s RxNRTDD; /**< Parameters for ::ORI_ObjectType_RxNRTDD. */
ORI_ObjectParams_ORILink_s ORILink; /**< Parameters for ::ORI_ObjectType_ORILink. */
ORI_ObjectParams_ExternalEventPort_s ExternalEventPort; /**< Parameters for ::ORI_ObjectType_ExternalEventPort. */
ORI_ObjectParams_AISGPort_s AISGPort; /**< Parameters for ::ORI_ObjectType_AISGPort. */
targets/ARCH/COMMON/common_lib.h
+6
View File
@@ -239,6 +239,12 @@ typedef struct {
double tx_sample_rate;
//! check for threequarter sampling rate
int8_t threequarter_fs;
//! Flag to indicate this configuration is for NR
int nr_flag;
//! NR band number
int nr_band;
//! NR scs for raster
int nr_scs_for_raster;
} openair0_config_t;
/*! \brief RF mapping */
targets/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp
+11 -12
View File
@@ -674,27 +674,27 @@ static int trx_usrp_read(openair0_device *device, openair0_timestamp *ptimestamp
}
if (samples_received == nsamps) s->wait_for_first_pps=0;
// bring RX data into 12 LSBs for softmodem RX
// bring RX data into 12 LSBs for softmodem RX
for (int i=0; i<cc; i++) {
for (int j=0; j<nsamps2; j++) {
#if defined(__x86_64__) || defined(__i386__)
#ifdef __AVX2__
// FK: in some cases the buffer might not be 32 byte aligned, so we cannot use avx2
if ((((uintptr_t) buff[i])&0x1F)==0) {
((__m256i *)buff[i])[j] = _mm256_srai_epi16(buff_tmp[i][j],rxshift);
for (int j=0; j<nsamps2; j++)
((__m256i *)buff[i])[j] = _mm256_srai_epi16(buff_tmp[i][j],rxshift);
} else {
((__m128i *)buff[i])[2*j] = _mm_srai_epi16(((__m128i *)buff_tmp[i])[2*j],rxshift);
((__m128i *)buff[i])[2*j+1] = _mm_srai_epi16(((__m128i *)buff_tmp[i])[2*j+1],rxshift);
for (int j=0; j<(nsamps2<<1); j++)
((__m128i *)buff[i])[j] = _mm_srai_epi16(((__m128i *)buff_tmp[i])[j],rxshift);
}
#else
((__m128i *)buff[i])[j] = _mm_srai_epi16(buff_tmp[i][j],rxshift);
#else
for (int j=0; j<nsamps2; j++)
((__m128i *)buff[i])[j] = _mm_srai_epi16(buff_tmp[i][j],rxshift);
#endif
#elif defined(__arm__)
((int16x8_t *)buff[i])[j] = vshrq_n_s16(buff_tmp[i][j],rxshift);
for (int j=0; j<nsamps2; j++)
((int16x8_t *)buff[i])[j] = vshrq_n_s16(buff_tmp[i][j],rxshift);
#endif
}
}
if (samples_received < nsamps) {
@@ -1116,7 +1116,6 @@ extern "C" {
if (device->type==USRP_X300_DEV) {
openair0_cfg[0].rx_gain_calib_table = calib_table_x310;
std::cerr << "-- Using calibration table: calib_table_x310" << std::endl;
s->usrp->set_rx_dc_offset(true);
}
if (device->type==USRP_N300_DEV) {
targets/ARCH/rfsimulator/README.md
+11 -7
View File
@@ -61,6 +61,8 @@ Setting the env variable RFSIMULATOR can be used instead of using the serveraddr
## How to use the RF simulator options
To define and use a channel model, the configuration file needs to include a channel configuration file. To do this, add `@include "channelmod_rfsimu.conf"` to the end of the configuration file, and place the channel configuration file in the same directory. An example channel configuration file `channelmod_rfsimu.conf` is in `ci-scripts/conf_files`.
Add the following options to the command line to enable the channel model and the IQ samples saving for future replay:
```bash
--rfsimulator.options chanmod,saviq
@@ -82,6 +84,8 @@ Example run:
sudo RFSIMULATOR=server ./nr-softmodem -O ../../../targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.tm1.106PRB.usrpn300.conf --parallel-config PARALLEL_SINGLE_THREAD --rfsim --phy-test --rfsimulator.options chanmod --rfsimulator.modelname AWGN
```
where `@include "channelmod_rfsimu.conf"` has been added at the end of the file, and `ci-scripts/conf_files/channelmod_rfsimu.conf` copied to `targets/PROJECTS/GENERIC-LTE-EPC/CONF/`.
## 4G case
For the UE, it should be set to the IP address of the eNB. For example:
@@ -102,9 +106,7 @@ $OPENAIR_DIR/targets/bin/conf2uedata -c $OPENAIR_DIR/openair3/NAS/TOOLS/ue_eurec
## 5G case
The 5G RF simulator will be aligned with the 4G as the efforts for merging the 5G specific branches into the develop make progresses.
After regular build, add the simulation driver (do not use ./build_oai -w SIMU until 4G and 5G branches are merged).
If `build_oai` has not been run with `-w SIMU`, you need to build the `rfsimulator` manually. To do so:
```bash
cd ran_build/build
make rfsimulator
@@ -113,7 +115,7 @@ make rfsimulator
### Launch gNB in one window
```bash
sudo RFSIMULATOR=server ./nr-softmodem -O ../../../targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.tm1.106PRB.usrpn300.conf --parallel-config PARALLEL_SINGLE_THREAD --rfsim --phy-test
sudo RFSIMULATOR=server ./nr-softmodem -O ../../../targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.tm1.106PRB.usrpn300.conf --parallel-config PARALLEL_SINGLE_THREAD --rfsim --phy-test --nokrnmod 1
```
### Launch UE in another window
@@ -124,15 +126,17 @@ sudo RFSIMULATOR=<TARGET_GNB_INTERFACE_ADDRESS> ./nr-uesoftmodem --rfsim --phy-t
Notes:
1. <TARGET_GNB_INTERFACE_ADDRESS> can be 127.0.0.1 if both gNB and nrUE executables run on the same host, OR the IP interface address of the remote host running the gNB executable, if the gNB and nrUE run on separate hosts
2. the --rrc_config_path parameter SHALL specify where the 2 RAW files are located (`rbconfig.raw` and `reconfig.raw`).
1. This starts the gNB and UE in the `phy-test` UP-only mode where the gNB is started as if a UE had already connected, and a configurable scheduler is used instead of the default one. The options `-m`, `-l`, `-t`, `-M`, `-T`, `-D`, and `-U` can be used to configure this scheduler.
2. <TARGET_GNB_INTERFACE_ADDRESS> can be 127.0.0.1 if both gNB and nrUE executables run on the same host, OR the IP interface address of the remote host running the gNB executable, if the gNB and nrUE run on separate hosts.
3. The --rrc_config_path parameter SHALL specify where the 2 RAW files are located (`rbconfig.raw` and `reconfig.raw`).
- If you are running on the same machine and launched the 2 executables (`nr-softmodem` and `nr-uesoftmodem`) from the same directory, nothing has to be done.
- If you launched the 2 executables from 2 different folders, just point to the location where you launched the `nr-softmodem`:
* `sudo RFSIMULATOR=<TARGET_GNB_INTERFACE_ADDRESS> ./nr-uesoftmodem --rfsim --phy-test --rrc_config_path /the/path/where/you/launched/nr-softmodem`
- If you are not running on the same machine or launched the 2 executables from 2 different folders, you need to **COPY** the 2 raw files
* `scp usera@machineA:/the/path/where/you/launched/nr-softmodem/r*config.raw userb@machineB:/the/path/where/you/will/launch/nr-uesoftmodem/`
* Obviously this operation SHALL be done before launching the `nr-uesoftmodem` executable.
3. to enable the noS1 mode --noS1 and --nokrnmod 1 options should be added to the command line
4. To enable the noS1 mode, `--noS1` option should be added to the command line.
5. To operate the gNB/UE with a 5GC, start them using the `--sa` option. More information can be found [here](../../../doc/TESTING_5GSA_setup.md#2-sa-setup-with-oai-nr-ue-softmodem).
In the UE, you can add `-d` option to get the softscope.
targets/ARCH/rfsimulator/simulator.c
+12 -9
View File
@@ -429,6 +429,8 @@ static int rfsimulator_write_internal(rfsimulator_state_t *t, openair0_timestamp
if (!alreadyLocked)
pthread_mutex_lock(&Sockmutex);
LOG_D(HW,"sending %d samples at time: %ld, nbAnt %d\n", nsamps, timestamp, nbAnt);
for (int i=0; i<FD_SETSIZE; i++) {
buffer_t *b=&t->buf[i];
@@ -621,7 +623,7 @@ static int rfsimulator_read(openair0_device *device, openair0_timestamp *ptimest
}
rfsimulator_state_t *t = device->priv;
LOG_D(HW, "Enter rfsimulator_read, expect %d samples, will release at TS: %ld\n", nsamps, t->nextRxTstamp+nsamps);
LOG_D(HW, "Enter rfsimulator_read, expect %d samples, will release at TS: %ld, nbAnt %d\n", nsamps, t->nextRxTstamp+nsamps, nbAnt);
// deliver data from received data
// check if a UE is connected
int first_sock;
@@ -693,15 +695,16 @@ static int rfsimulator_read(openair0_device *device, openair0_timestamp *ptimest
t->poll_telnetcmdq(t->telnetcmd_qid,t);
for (int a=0; a<nbAnt; a++) {//loop over number of Rx antennas
if ( ptr->channel_model != NULL ) // apply a channel model
rxAddInput( ptr->circularBuf, (c16_t *) samplesVoid[a],
a,
ptr->channel_model,
nsamps,
t->nextRxTstamp,
CirSize
);
if ( ptr->channel_model != NULL ) { // apply a channel model
rxAddInput(ptr->circularBuf, (c16_t *) samplesVoid[a],
a,
ptr->channel_model,
nsamps,
t->nextRxTstamp,
CirSize);
}
else { // no channel modeling
double H_awgn_mimo[4][4] ={{1.0, 0.2, 0.1, 0.05}, //rx 0
{0.2, 1.0, 0.2, 0.1}, //rx 1
{0.1, 0.2, 1.0, 0.2}, //rx 2
targets/PROJECTS/GENERIC-NR-5GC/CONF/cu_gnb.conf
-3
View File
@@ -45,10 +45,7 @@ gNBs =
remote_s_portc = 500;
remote_s_portd = 2152;
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
min_rxtxtime = 6;
sib1_tda = 0;
pdcch_ConfigSIB1 = (
{
targets/PROJECTS/GENERIC-NR-5GC/CONF/du_gnb.conf
-1
View File
@@ -38,7 +38,6 @@ gNBs =
ssb_SubcarrierOffset = 0;
min_rxtxtime = 6;
sib1_tda = 0;
pdcch_ConfigSIB1 = (
{
targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.band78.tm1.106PRB.usrpn300.gtp-itti.conf
+1 -1
View File
@@ -37,7 +37,7 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
sib1_tda = 0;
servingCellConfigCommon = (
{
#spCellConfigCommon
targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band41.fr1.106PRB.usrpb210.conf
+62 -10
View File
@@ -19,10 +19,6 @@ gNBs =
{
sst = 1;
sd = 0x1; // 0 false, else true
},
{
sst = 1;
sd = 0x112233; // 0 false, else true
}
);
@@ -33,8 +29,7 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
min_rxtxtime = 6;
sib1_tda = 0;
min_rxtxtime = 2;
do_SRS = 1;
pdcch_ConfigSIB1 = (
@@ -172,6 +167,64 @@ gNBs =
);
# Dedicated Serving Cell Configuration
servingCellConfigDedicated = ({
# BWP-Downlink
# BWP 1 Configuration
dl_bwp-Id_1 = 1;
dl_bwp1_locationAndBandwidth = 28875; // RBstart=0, L=106 (40 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_bwp1_subcarrierSpacing = 1;
# BWP 2 Configuration
dl_bwp-Id_2 = 2;
dl_bwp2_locationAndBandwidth = 13750; // RBstart=0, L=51 (20 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_bwp2_subcarrierSpacing = 1;
# BWP 3 Configuration
dl_bwp-Id_3 = 3;
dl_bwp3_locationAndBandwidth = 6325; // RBstart=0, L=24 (10 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_bwp3_subcarrierSpacing = 1;
firstActiveDownlinkBWP-Id = 1; #BWP-Id
defaultDownlinkBWP-Id = 1; #BWP-Id
# bwp-InactivityTimer ENUMERATED {ms2, ms3, ms4, ms5, ms6, ms8, ms10, ms20, ms30,
# ms40,ms50, ms60, ms80,ms100, ms200,ms300, ms500,
# ms750, ms1280, ms1920, ms2560, spare10, spare9, spare8,
# spare7, spare6, spare5, spare4, spare3, spare2, spare1 }
# UplinkConfig
# BWP-Uplink
# BWP 1 Configuration
ul_bwp-Id_1 = 1;
ul_bwp1_locationAndBandwidth = 28875; // RBstart=0, L=106 (40 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_bwp1_subcarrierSpacing = 1;
# BWP 2 Configuration
ul_bwp-Id_2 = 2;
ul_bwp2_locationAndBandwidth = 13750; // RBstart=0, L=51 (20 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_bwp2_subcarrierSpacing = 1;
# BWP 3 Configuration
ul_bwp-Id_3 = 3;
ul_bwp3_locationAndBandwidth = 6325; // RBstart=0, L=24 (10 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_bwp3_subcarrierSpacing = 1;
firstActiveUplinkBWP-Id = 1; #BWP-Id
}
);
# ------- SCTP definitions
SCTP :
@@ -219,7 +272,7 @@ L1s = (
num_cc = 1;
tr_n_preference = "local_mac";
prach_dtx_threshold = 120;
pucch0_dtx_threshold = 150;
pucch0_dtx_threshold = 100;
ofdm_offset_divisor = 8; #set this to UINT_MAX for offset 0
}
);
@@ -229,12 +282,11 @@ RUs = (
local_rf = "yes"
nb_tx = 1
nb_rx = 1
att_tx = 0
att_rx = 0;
att_tx = 6;
att_rx = 6;
bands = [41];
max_pdschReferenceSignalPower = -27;
max_rxgain = 114;
sf_extension = 0;
eNB_instances = [0];
#beamforming 1x4 matrix:
bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000];
targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band66.fr1.106PRB.usrpn300.conf
-1
View File
@@ -36,7 +36,6 @@ gNBs =
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
min_rxtxtime = 6;
sib1_tda = 0;
pdcch_ConfigSIB1 = (
{
targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.106PRB.2x2.usrpn300.conf
+60 -8
View File
@@ -19,10 +19,6 @@ gNBs =
{
sst = 1;
sd = 0x1; // 0 false, else true
},
{
sst = 1;
sd = 0x112233; // 0 false, else true
}
);
@@ -35,13 +31,12 @@ gNBs =
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts_N1 = 2;
pusch_AntennaPorts = 2;
sib1_tda = 0;
do_SRS = 1;
ul_prbblacklist = "51,52,53,54"
pdcch_ConfigSIB1 = (
{
controlResourceSetZero = 11;
controlResourceSetZero = 12;
searchSpaceZero = 0;
}
);
@@ -73,7 +68,7 @@ gNBs =
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialDLBWPsubcarrierSpacing = 1;
#pdcch-ConfigCommon
initialDLBWPcontrolResourceSetZero = 11;
initialDLBWPcontrolResourceSetZero = 12;
initialDLBWPsearchSpaceZero = 0;
#uplinkConfigCommon
@@ -174,6 +169,64 @@ gNBs =
);
# Dedicated Serving Cell Configuration
servingCellConfigDedicated = ({
# BWP-Downlink
# BWP 1 Configuration
dl_bwp-Id_1 = 1;
dl_bwp1_locationAndBandwidth = 28875; // RBstart=0, L=106 (40 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_bwp1_subcarrierSpacing = 1;
# BWP 2 Configuration
dl_bwp-Id_2 = 2;
dl_bwp2_locationAndBandwidth = 13750; // RBstart=0, L=51 (20 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_bwp2_subcarrierSpacing = 1;
# BWP 3 Configuration
dl_bwp-Id_3 = 3;
dl_bwp3_locationAndBandwidth = 6325; // RBstart=0, L=24 (10 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_bwp3_subcarrierSpacing = 1;
firstActiveDownlinkBWP-Id = 1; #BWP-Id
defaultDownlinkBWP-Id = 1; #BWP-Id
# bwp-InactivityTimer ENUMERATED {ms2, ms3, ms4, ms5, ms6, ms8, ms10, ms20, ms30,
# ms40,ms50, ms60, ms80,ms100, ms200,ms300, ms500,
# ms750, ms1280, ms1920, ms2560, spare10, spare9, spare8,
# spare7, spare6, spare5, spare4, spare3, spare2, spare1 }
# UplinkConfig
# BWP-Uplink
# BWP 1 Configuration
ul_bwp-Id_1 = 1;
ul_bwp1_locationAndBandwidth = 28875; // RBstart=0, L=106 (40 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_bwp1_subcarrierSpacing = 1;
# BWP 2 Configuration
ul_bwp-Id_2 = 2;
ul_bwp2_locationAndBandwidth = 13750; // RBstart=0, L=51 (20 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_bwp2_subcarrierSpacing = 1;
# BWP 3 Configuration
ul_bwp-Id_3 = 3;
ul_bwp3_locationAndBandwidth = 6325; // RBstart=0, L=24 (10 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_bwp3_subcarrierSpacing = 1;
firstActiveUplinkBWP-Id = 1; #BWP-Id
}
);
# ------- SCTP definitions
SCTP :
@@ -235,7 +288,6 @@ RUs = (
bands = [78];
max_pdschReferenceSignalPower = -27;
max_rxgain = 75;
sf_extension = 0;
eNB_instances = [0];
##beamforming 1x2 matrix: 1 layer x 2 antennas
bf_weights = [0x00007fff, 0x0000];
targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.106PRB.usrpb210.4layer.conf
+320
View File
@@ -0,0 +1,320 @@
Active_gNBs = ( "gNB-Eurecom-5GNRBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
gNBs =
(
{
////////// Identification parameters:
gNB_ID = 0xe00;
gNB_name = "gNB-Eurecom-5GNRBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
plmn_list = ({
mcc = 208;
mnc = 99;
mnc_length = 2;
snssaiList = (
{
sst = 1;
sd = 0x1; // 0 false, else true
},
{
sst = 1;
sd = 0x112233; // 0 false, else true
}
);
});
nr_cellid = 12345678L;
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 4;
pusch_AntennaPorts = 4;
sib1_tda = 0;
pdcch_ConfigSIB1 = (
{
controlResourceSetZero = 12;
searchSpaceZero = 0;
}
);
servingCellConfigCommon = (
{
#spCellConfigCommon
physCellId = 0;
# downlinkConfigCommon
#frequencyInfoDL
# this is 3600 MHz + 43 PRBs@30kHz SCS (same as initial BWP)
absoluteFrequencySSB = 641280;
dl_frequencyBand = 78;
# this is 3600 MHz
dl_absoluteFrequencyPointA = 640008;
#scs-SpecificCarrierList
dl_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_subcarrierSpacing = 1;
dl_carrierBandwidth = 106;
#initialDownlinkBWP
#genericParameters
# this is RBstart=27,L=48 (275*(L-1))+RBstart
initialDLBWPlocationAndBandwidth = 28875; # 6366 12925 12956 28875 12952
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialDLBWPsubcarrierSpacing = 1;
#pdcch-ConfigCommon
initialDLBWPcontrolResourceSetZero = 12;
initialDLBWPsearchSpaceZero = 0;
#pdsch-ConfigCommon
#pdschTimeDomainAllocationList (up to 16 entries)
initialDLBWPk0_0 = 0; #for DL slot
initialDLBWPmappingType_0 = 0; #0=typeA,1=typeB
initialDLBWPstartSymbolAndLength_0 = 40; #this is SS=1,L=13
initialDLBWPk0_1 = 0; #for mixed slot
initialDLBWPmappingType_1 = 0;
initialDLBWPstartSymbolAndLength_1 = 57; #this is SS=1,L=5
#uplinkConfigCommon
#frequencyInfoUL
ul_frequencyBand = 78;
#scs-SpecificCarrierList
ul_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_subcarrierSpacing = 1;
ul_carrierBandwidth = 106;
pMax = 20;
#initialUplinkBWP
#genericParameters
initialULBWPlocationAndBandwidth = 28875;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialULBWPsubcarrierSpacing = 1;
#rach-ConfigCommon
#rach-ConfigGeneric
prach_ConfigurationIndex = 98;
#prach_msg1_FDM
#0 = one, 1=two, 2=four, 3=eight
prach_msg1_FDM = 0;
prach_msg1_FrequencyStart = 0;
zeroCorrelationZoneConfig = 13;
preambleReceivedTargetPower = -96;
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
preambleTransMax = 6;
#powerRampingStep
# 0=dB0,1=dB2,2=dB4,3=dB6
powerRampingStep = 1;
#ra_ReponseWindow
#1,2,4,8,10,20,40,80
ra_ResponseWindow = 4;
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 4;
#oneHalf (0..15) 4,8,12,16,...60,64
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 14;
#ra_ContentionResolutionTimer
#(0..7) 8,16,24,32,40,48,56,64
ra_ContentionResolutionTimer = 7;
rsrp_ThresholdSSB = 19;
#prach-RootSequenceIndex_PR
#1 = 839, 2 = 139
prach_RootSequenceIndex_PR = 2;
prach_RootSequenceIndex = 1;
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
#
msg1_SubcarrierSpacing = 1,
# restrictedSetConfig
# 0=unrestricted, 1=restricted type A, 2=restricted type B
restrictedSetConfig = 0,
# pusch-ConfigCommon (up to 16 elements)
initialULBWPk2_0 = 6; # used for UL slot
initialULBWPmappingType_0 = 1
initialULBWPstartSymbolAndLength_0 = 41; # this is SS=0 L=13
initialULBWPk2_1 = 6; # used for mixed slot
initialULBWPmappingType_1 = 1;
initialULBWPstartSymbolAndLength_1 = 52; # this is SS=10 L=4
initialULBWPk2_2 = 7; # used for Msg.3 during RA
initialULBWPmappingType_2 = 1;
initialULBWPstartSymbolAndLength_2 = 52; # this is SS=10 L=4
msg3_DeltaPreamble = 1;
p0_NominalWithGrant =-90;
# pucch-ConfigCommon setup :
# pucchGroupHopping
# 0 = neither, 1= group hopping, 2=sequence hopping
pucchGroupHopping = 0;
hoppingId = 40;
p0_nominal = -90;
# ssb_PositionsInBurs_BitmapPR
# 1=short, 2=medium, 3=long
ssb_PositionsInBurst_PR = 2;
ssb_PositionsInBurst_Bitmap = 1;
# ssb_periodicityServingCell
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
ssb_periodicityServingCell = 2;
# dmrs_TypeA_position
# 0 = pos2, 1 = pos3
dmrs_TypeA_Position = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
subcarrierSpacing = 1;
#tdd-UL-DL-ConfigurationCommon
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
referenceSubcarrierSpacing = 1;
# pattern1
# dl_UL_TransmissionPeriodicity
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
dl_UL_TransmissionPeriodicity = 6;
nrofDownlinkSlots = 7;
nrofDownlinkSymbols = 6;
nrofUplinkSlots = 2;
nrofUplinkSymbols = 4;
ssPBCH_BlockPower = -25;
}
);
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
amf_ip_address = ( { ipv4 = "192.168.70.132";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
GNB_INTERFACE_NAME_FOR_NG_AMF = "demo-oai";
GNB_IPV4_ADDRESS_FOR_NG_AMF = "192.168.70.129/24";
GNB_INTERFACE_NAME_FOR_NGU = "demo-oai";
GNB_IPV4_ADDRESS_FOR_NGU = "192.168.70.129/24";
GNB_PORT_FOR_S1U = 2152; # Spec 2152
};
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
pusch_TargetSNRx10 = 150;
pucch_TargetSNRx10 = 200;
}
);
L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
pusch_proc_threads = 8;
prach_dtx_threshold = 120;
pucch0_dtx_threshold = 150;
ofdm_offset_divisor = 8; #set this to UINT_MAX for offset 0
}
);
RUs = (
{
local_rf = "yes"
nb_tx = 4
nb_rx = 4
att_tx = 0
att_rx = 0;
bands = [78];
max_pdschReferenceSignalPower = -27;
max_rxgain = 114;
eNB_instances = [0];
#beamforming 1x4 matrix:
bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000, 0x00000000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff];
clock_src = "internal";
}
);
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
parallel_config = "PARALLEL_SINGLE_THREAD";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_ENABLE";
}
);
rfsimulator :
{
serveraddr = "server";
serverport = "4043";
options = (); #("saviq"); or/and "chanmod"
modelname = "AWGN";
IQfile = "/tmp/rfsimulator.iqs";
};
security = {
# preferred ciphering algorithms
# the first one of the list that an UE supports in chosen
# valid values: nea0, nea1, nea2, nea3
ciphering_algorithms = ( "nea0" );
# preferred integrity algorithms
# the first one of the list that an UE supports in chosen
# valid values: nia0, nia1, nia2, nia3
integrity_algorithms = ( "nia2", "nia0" );
# setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
# what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
drb_ciphering = "yes";
drb_integrity = "no";
};
log_config :
{
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
ngap_log_level ="info";
ngap_log_verbosity ="medium";
};
targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.106PRB.usrpb210.conf
+62 -10
View File
@@ -19,10 +19,6 @@ gNBs =
{
sst = 1;
sd = 0x1; // 0 false, else true
},
{
sst = 1;
sd = 0x112233; // 0 false, else true
}
);
@@ -33,8 +29,7 @@ gNBs =
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
min_rxtxtime = 6;
sib1_tda = 0;
min_rxtxtime = 2;
pdcch_ConfigSIB1 = (
{
@@ -171,6 +166,64 @@ gNBs =
);
# Dedicated Serving Cell Configuration
servingCellConfigDedicated = ({
# BWP-Downlink
# BWP 1 Configuration
dl_bwp-Id_1 = 1;
dl_bwp1_locationAndBandwidth = 28875; // RBstart=0, L=106 (40 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_bwp1_subcarrierSpacing = 1;
# BWP 2 Configuration
dl_bwp-Id_2 = 2;
dl_bwp2_locationAndBandwidth = 13750; // RBstart=0, L=51 (20 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_bwp2_subcarrierSpacing = 1;
# BWP 3 Configuration
dl_bwp-Id_3 = 3;
dl_bwp3_locationAndBandwidth = 6325; // RBstart=0, L=24 (10 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_bwp3_subcarrierSpacing = 1;
firstActiveDownlinkBWP-Id = 1; #BWP-Id
defaultDownlinkBWP-Id = 1; #BWP-Id
# bwp-InactivityTimer ENUMERATED {ms2, ms3, ms4, ms5, ms6, ms8, ms10, ms20, ms30,
# ms40,ms50, ms60, ms80,ms100, ms200,ms300, ms500,
# ms750, ms1280, ms1920, ms2560, spare10, spare9, spare8,
# spare7, spare6, spare5, spare4, spare3, spare2, spare1 }
# UplinkConfig
# BWP-Uplink
# BWP 1 Configuration
ul_bwp-Id_1 = 1;
ul_bwp1_locationAndBandwidth = 28875; // RBstart=0, L=106 (40 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_bwp1_subcarrierSpacing = 1;
# BWP 2 Configuration
ul_bwp-Id_2 = 2;
ul_bwp2_locationAndBandwidth = 13750; // RBstart=0, L=51 (20 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_bwp2_subcarrierSpacing = 1;
# BWP 3 Configuration
ul_bwp-Id_3 = 3;
ul_bwp3_locationAndBandwidth = 6325; // RBstart=0, L=24 (10 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_bwp3_subcarrierSpacing = 1;
firstActiveUplinkBWP-Id = 1; #BWP-Id
}
);
# ------- SCTP definitions
SCTP :
@@ -218,7 +271,7 @@ L1s = (
num_cc = 1;
tr_n_preference = "local_mac";
prach_dtx_threshold = 120;
pucch0_dtx_threshold = 150;
pucch0_dtx_threshold = 100;
ofdm_offset_divisor = 8; #set this to UINT_MAX for offset 0
}
);
@@ -228,12 +281,11 @@ RUs = (
local_rf = "yes"
nb_tx = 1
nb_rx = 1
att_tx = 0
att_rx = 0;
att_tx = 6;
att_rx = 6;
bands = [78];
max_pdschReferenceSignalPower = -27;
max_rxgain = 114;
sf_extension = 0;
eNB_instances = [0];
#beamforming 1x4 matrix:
bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000];
targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.162PRB.2x2.usrpn300.conf
+13 -46
View File
@@ -19,26 +19,23 @@ gNBs =
{
sst = 1;
sd = 0x1; // 0 false, else true
},
{
sst = 1;
sd = 0x112233; // 0 false, else true
}
);
});
nr_cellid = 12345678L;
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts_N1 = 2;
pusch_AntennaPorts = 2;
ul_prbblacklist = "79,80,81,82"
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts_XP = 1;
pusch_AntennaPorts = 2;
do_CSIRS = 0;
ul_prbblacklist = "79,80,81,82"
pdcch_ConfigSIB1 = (
{
controlResourceSetZero = 11;
controlResourceSetZero = 12;
searchSpaceZero = 10;
}
);
@@ -70,21 +67,8 @@ gNBs =
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialDLBWPsubcarrierSpacing = 1;
#pdcch-ConfigCommon
initialDLBWPcontrolResourceSetZero = 11;
initialDLBWPcontrolResourceSetZero = 12;
initialDLBWPsearchSpaceZero = 10;
#pdsch-ConfigCommon
#pdschTimeDomainAllocationList (up to 16 entries)
initialDLBWPk0_0 = 0;
#initialULBWPmappingType
#0=typeA,1=typeB
initialDLBWPmappingType_0 = 0;
#this is SS=1,L=13
initialDLBWPstartSymbolAndLength_0 = 40;
initialDLBWPk0_1 = 0;
initialDLBWPmappingType_1 = 0;
#this is SS=1,L=5
initialDLBWPstartSymbolAndLength_1 = 57;
#uplinkConfigCommon
#frequencyInfoUL
@@ -139,22 +123,6 @@ gNBs =
# 0=unrestricted, 1=restricted type A, 2=restricted type B
restrictedSetConfig = 0,
# pusch-ConfigCommon (up to 16 elements)
initialULBWPk2_0 = 2;
initialULBWPmappingType_0 = 1
# this is SS=2 L=13
initialULBWPstartSymbolAndLength_0 = 41;
initialULBWPk2_1 = 2;
initialULBWPmappingType_1 = 1;
# this is SS=0 L=4
initialULBWPstartSymbolAndLength_1 = 52;
initialULBWPk2_2 = 7;
initialULBWPmappingType_2 = 1;
# this is SS=10 L=4
initialULBWPstartSymbolAndLength_2 = 52;
msg3_DeltaPreamble = 1;
p0_NominalWithGrant =-90;
@@ -236,7 +204,7 @@ MACRLCs = (
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
pusch_TargetSNRx10 = 200;
pusch_TargetSNRx10 = 150;
pucch_TargetSNRx10 = 200;
ulsch_max_frame_inactivity = 0;
}
@@ -247,21 +215,20 @@ L1s = (
num_cc = 1;
tr_n_preference = "local_mac";
prach_dtx_threshold = 120;
pucch0_dtx_threshold = 120;
pucch0_dtx_threshold = 80;
}
);
RUs = (
{
local_rf = "yes"
nb_tx = 2
nb_rx = 2
att_tx = 0
nb_tx = 2;
nb_rx = 2;
att_tx = 0;
att_rx = 0;
bands = [78];
max_pdschReferenceSignalPower = -27;
max_rxgain = 75;
sf_extension = 0;
eNB_instances = [0];
##beamforming 1x2 matrix: 1 layer x 2 antennas
bf_weights = [0x00007fff, 0x0000];
targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.217PRB.2x2.usrpn300.conf
+321
View File
@@ -0,0 +1,321 @@
Active_gNBs = ( "gNB-OAI");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
gNBs =
(
{
////////// Identification parameters:
gNB_ID = 0xe00;
gNB_name = "gNB-OAI";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
plmn_list = ({
mcc = 208;
mnc = 99;
mnc_length = 2;
snssaiList = (
{
sst = 1;
sd = 0x1; // 0 false, else true
}
);
});
nr_cellid = 12345678L;
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts_XP = 1;
pusch_AntennaPorts = 2;
do_CSIRS = 0;
ul_prbblacklist = "107,108,109,110"
pdcch_ConfigSIB1 = (
{
controlResourceSetZero = 12;
searchSpaceZero = 10;
}
);
servingCellConfigCommon = (
{
#spCellConfigCommon
physCellId = 0;
# downlinkConfigCommon
#frequencyInfoDL
# this is 3300.24 + 106*12*30e3 = 3338.40 MHz (5G NR GSCN: 7734)
absoluteFrequencySSB = 622560;
dl_frequencyBand = 78;
# this is 3300.24 MHz
dl_absoluteFrequencyPointA = 620016;
#scs-SpecificCarrierList
dl_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_subcarrierSpacing = 1;
dl_carrierBandwidth = 217;
#initialDownlinkBWP
#genericParameters
# this is RBstart=0,L=162 (275*(275-L+1))+(274-RBstart))
initialDLBWPlocationAndBandwidth = 31624;
#
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialDLBWPsubcarrierSpacing = 1;
#pdcch-ConfigCommon
initialDLBWPcontrolResourceSetZero = 12;
initialDLBWPsearchSpaceZero = 10;
#uplinkConfigCommon
#frequencyInfoUL
ul_frequencyBand = 78;
#scs-SpecificCarrierList
ul_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_subcarrierSpacing = 1;
ul_carrierBandwidth = 217;
pMax = 20;
#initialUplinkBWP
#genericParameters
initialULBWPlocationAndBandwidth = 31624;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialULBWPsubcarrierSpacing = 1;
#rach-ConfigCommon
#rach-ConfigGeneric
prach_ConfigurationIndex = 98;
#prach_msg1_FDM
#0 = one, 1=two, 2=four, 3=eight
prach_msg1_FDM = 0;
prach_msg1_FrequencyStart = 0;
zeroCorrelationZoneConfig = 12;
preambleReceivedTargetPower = -96;
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
preambleTransMax = 6;
#powerRampingStep
# 0=dB0,1=dB2,2=dB4,3=dB6
powerRampingStep = 1;
#ra_ReponseWindow
#1,2,4,8,10,20,40,80
ra_ResponseWindow = 4;
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 3;
#oneHalf (0..15) 4,8,12,16,...60,64
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 15;
#ra_ContentionResolutionTimer
#(0..7) 8,16,24,32,40,48,56,64
ra_ContentionResolutionTimer = 7;
rsrp_ThresholdSSB = 19;
#prach-RootSequenceIndex_PR
#1 = 839, 2 = 139
prach_RootSequenceIndex_PR = 2;
prach_RootSequenceIndex = 1;
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
#
msg1_SubcarrierSpacing = 1,
# restrictedSetConfig
# 0=unrestricted, 1=restricted type A, 2=restricted type B
restrictedSetConfig = 0,
msg3_DeltaPreamble = 1;
p0_NominalWithGrant =-90;
# pucch-ConfigCommon setup :
# pucchGroupHopping
# 0 = neither, 1= group hopping, 2=sequence hopping
pucchGroupHopping = 0;
hoppingId = 40;
p0_nominal = -70;
# ssb_PositionsInBurs_BitmapPR
# 1=short, 2=medium, 3=long
ssb_PositionsInBurst_PR = 2;
ssb_PositionsInBurst_Bitmap = 1;
# ssb_periodicityServingCell
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
ssb_periodicityServingCell = 2;
# dmrs_TypeA_position
# 0 = pos2, 1 = pos3
dmrs_TypeA_Position = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
subcarrierSpacing = 1;
#tdd-UL-DL-ConfigurationCommon
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
referenceSubcarrierSpacing = 1;
# pattern1
# dl_UL_TransmissionPeriodicity
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
dl_UL_TransmissionPeriodicity = 6;
nrofDownlinkSlots = 7;
nrofDownlinkSymbols = 6;
nrofUplinkSlots = 2;
nrofUplinkSymbols = 4;
ssPBCH_BlockPower = -25;
}
);
# Dedicated Serving Cell Configuration
servingCellConfigDedicated = ({
# BWP-Downlink
# BWP 1 Configuration
dl_bwp-Id_1 = 1;
dl_bwp1_locationAndBandwidth = 16499; // RBstart=0, L=217 (80 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_bwp1_subcarrierSpacing = 1;
firstActiveDownlinkBWP-Id = 1; #BWP-Id
defaultDownlinkBWP-Id = 1; #BWP-Id
# bwp-InactivityTimer ENUMERATED {ms2, ms3, ms4, ms5, ms6, ms8, ms10, ms20, ms30,
# ms40,ms50, ms60, ms80,ms100, ms200,ms300, ms500,
# ms750, ms1280, ms1920, ms2560, spare10, spare9, spare8,
# spare7, spare6, spare5, spare4, spare3, spare2, spare1 }
# UplinkConfig
# BWP-Uplink
# BWP 1 Configuration
ul_bwp-Id_1 = 1;
ul_bwp1_locationAndBandwidth = 16499; // RBstart=0, L=217 (80 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_bwp1_subcarrierSpacing = 1;
firstActiveUplinkBWP-Id = 1; #BWP-Id
}
);
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// AMF parameters:
amf_ip_address = ( { ipv4 = "192.168.70.132";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
GNB_INTERFACE_NAME_FOR_NG_AMF = "demo-oai";
GNB_IPV4_ADDRESS_FOR_NG_AMF = "192.168.70.129/24";
GNB_INTERFACE_NAME_FOR_NGU = "demo-oai";
GNB_IPV4_ADDRESS_FOR_NGU = "192.168.70.129/24";
GNB_PORT_FOR_S1U = 2152; # Spec 2152
};
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
pusch_TargetSNRx10 = 150;
pucch_TargetSNRx10 = 200;
pusch_FailureThres = 1000;
ulsch_max_frame_inactivity = 0;
}
);
L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
prach_dtx_threshold = 120;
pucch0_dtx_threshold = 80;
}
);
RUs = (
{
local_rf = "yes"
nb_tx = 2;
nb_rx = 2;
att_tx = 0;
att_rx = 0;
bands = [78];
max_pdschReferenceSignalPower = -27;
max_rxgain = 75;
eNB_instances = [0];
##beamforming 1x2 matrix: 1 layer x 2 antennas
bf_weights = [0x00007fff, 0x0000];
#clock_src = "internal";
sdr_addrs = "mgmt_addr=192.168.10.2,addr=192.168.10.2,clock_source=internal,time_source=internal"
}
);
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
parallel_config = "PARALLEL_SINGLE_THREAD";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_ENABLE";
}
);
rfsimulator :
{
serveraddr = "server";
serverport = "4043";
options = (); #("saviq"); or/and "chanmod"
modelname = "AWGN";
IQfile = "/tmp/rfsimulator.iqs";
};
security = {
# preferred ciphering algorithms
# the first one of the list that an UE supports in chosen
# valid values: nea0, nea1, nea2, nea3
ciphering_algorithms = ( "nea0" );
# preferred integrity algorithms
# the first one of the list that an UE supports in chosen
# valid values: nia0, nia1, nia2, nia3
integrity_algorithms = ( "nia2", "nia0" );
# setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
# what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
drb_ciphering = "yes";
drb_integrity = "no";
};
log_config :
{
global_log_level ="info";
hw_log_level ="info";
phy_log_level ="info";
mac_log_level ="info";
rlc_log_level ="info";
pdcp_log_level ="info";
rrc_log_level ="info";
ngap_log_level ="debug";
f1ap_log_level ="debug";
};
targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.273PRB.2x2.usrpn300.conf
+321
View File
@@ -0,0 +1,321 @@
Active_gNBs = ( "gNB-OAI");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
gNBs =
(
{
////////// Identification parameters:
gNB_ID = 0xe00;
gNB_name = "gNB-OAI";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
plmn_list = ({
mcc = 208;
mnc = 99;
mnc_length = 2;
snssaiList = (
{
sst = 1;
sd = 0x1; // 0 false, else true
}
);
});
nr_cellid = 12345678L;
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts_XP = 1;
pusch_AntennaPorts = 2;
do_CSIRS = 0;
ul_prbblacklist = "135,136,137,138"
pdcch_ConfigSIB1 = (
{
controlResourceSetZero = 12;
searchSpaceZero = 10;
}
);
servingCellConfigCommon = (
{
#spCellConfigCommon
physCellId = 0;
# downlinkConfigCommon
#frequencyInfoDL
# this is 3300.24 + 134*12*30e3 = 3348.48 MHz (5G NR GSCN: 7741)
absoluteFrequencySSB = 623232;
dl_frequencyBand = 78;
# this is 3300.24 MHz
dl_absoluteFrequencyPointA = 620016;
#scs-SpecificCarrierList
dl_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_subcarrierSpacing = 1;
dl_carrierBandwidth = 273;
#initialDownlinkBWP
#genericParameters
# this is RBstart=0,L=162 (275*(275-L+1))+(274-RBstart))
initialDLBWPlocationAndBandwidth = 31624;
#
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialDLBWPsubcarrierSpacing = 1;
#pdcch-ConfigCommon
initialDLBWPcontrolResourceSetZero = 12;
initialDLBWPsearchSpaceZero = 10;
#uplinkConfigCommon
#frequencyInfoUL
ul_frequencyBand = 78;
#scs-SpecificCarrierList
ul_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_subcarrierSpacing = 1;
ul_carrierBandwidth = 273;
pMax = 20;
#initialUplinkBWP
#genericParameters
initialULBWPlocationAndBandwidth = 31624;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialULBWPsubcarrierSpacing = 1;
#rach-ConfigCommon
#rach-ConfigGeneric
prach_ConfigurationIndex = 98;
#prach_msg1_FDM
#0 = one, 1=two, 2=four, 3=eight
prach_msg1_FDM = 0;
prach_msg1_FrequencyStart = 0;
zeroCorrelationZoneConfig = 12;
preambleReceivedTargetPower = -90;
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
preambleTransMax = 6;
#powerRampingStep
# 0=dB0,1=dB2,2=dB4,3=dB6
powerRampingStep = 1;
#ra_ReponseWindow
#1,2,4,8,10,20,40,80
ra_ResponseWindow = 4;
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 3;
#oneHalf (0..15) 4,8,12,16,...60,64
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 15;
#ra_ContentionResolutionTimer
#(0..7) 8,16,24,32,40,48,56,64
ra_ContentionResolutionTimer = 7;
rsrp_ThresholdSSB = 19;
#prach-RootSequenceIndex_PR
#1 = 839, 2 = 139
prach_RootSequenceIndex_PR = 2;
prach_RootSequenceIndex = 1;
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
#
msg1_SubcarrierSpacing = 1,
# restrictedSetConfig
# 0=unrestricted, 1=restricted type A, 2=restricted type B
restrictedSetConfig = 0,
msg3_DeltaPreamble = 1;
p0_NominalWithGrant =-90;
# pucch-ConfigCommon setup :
# pucchGroupHopping
# 0 = neither, 1= group hopping, 2=sequence hopping
pucchGroupHopping = 0;
hoppingId = 40;
p0_nominal = -70;
# ssb_PositionsInBurs_BitmapPR
# 1=short, 2=medium, 3=long
ssb_PositionsInBurst_PR = 2;
ssb_PositionsInBurst_Bitmap = 1;
# ssb_periodicityServingCell
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
ssb_periodicityServingCell = 2;
# dmrs_TypeA_position
# 0 = pos2, 1 = pos3
dmrs_TypeA_Position = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
subcarrierSpacing = 1;
#tdd-UL-DL-ConfigurationCommon
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
referenceSubcarrierSpacing = 1;
# pattern1
# dl_UL_TransmissionPeriodicity
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
dl_UL_TransmissionPeriodicity = 6;
nrofDownlinkSlots = 7;
nrofDownlinkSymbols = 6;
nrofUplinkSlots = 2;
nrofUplinkSymbols = 4;
ssPBCH_BlockPower = -25;
}
);
# Dedicated Serving Cell Configuration
servingCellConfigDedicated = ({
# BWP-Downlink
# BWP 1 Configuration
dl_bwp-Id_1 = 1;
dl_bwp1_locationAndBandwidth = 1099; // RBstart=0, L=273 (100 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_bwp1_subcarrierSpacing = 1;
firstActiveDownlinkBWP-Id = 1; #BWP-Id
defaultDownlinkBWP-Id = 1; #BWP-Id
# bwp-InactivityTimer ENUMERATED {ms2, ms3, ms4, ms5, ms6, ms8, ms10, ms20, ms30,
# ms40,ms50, ms60, ms80,ms100, ms200,ms300, ms500,
# ms750, ms1280, ms1920, ms2560, spare10, spare9, spare8,
# spare7, spare6, spare5, spare4, spare3, spare2, spare1 }
# UplinkConfig
# BWP-Uplink
# BWP 1 Configuration
ul_bwp-Id_1 = 1;
ul_bwp1_locationAndBandwidth = 1099; // RBstart=0, L=273 (100 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_bwp1_subcarrierSpacing = 1;
firstActiveUplinkBWP-Id = 1; #BWP-Id
}
);
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// AMF parameters:
amf_ip_address = ( { ipv4 = "192.168.70.132";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
GNB_INTERFACE_NAME_FOR_NG_AMF = "demo-oai";
GNB_IPV4_ADDRESS_FOR_NG_AMF = "192.168.70.129/24";
GNB_INTERFACE_NAME_FOR_NGU = "demo-oai";
GNB_IPV4_ADDRESS_FOR_NGU = "192.168.70.129/24";
GNB_PORT_FOR_S1U = 2152; # Spec 2152
};
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
pusch_TargetSNRx10 = 150;
pucch_TargetSNRx10 = 200;
pusch_FailureThres = 1000;
ulsch_max_frame_inactivity = 0;
}
);
L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
prach_dtx_threshold = 120;
pucch0_dtx_threshold = 80;
}
);
RUs = (
{
local_rf = "yes"
nb_tx = 2;
nb_rx = 2;
att_tx = 0;
att_rx = 0;
bands = [78];
max_pdschReferenceSignalPower = -27;
max_rxgain = 75;
eNB_instances = [0];
##beamforming 1x2 matrix: 1 layer x 2 antennas
bf_weights = [0x00007fff, 0x0000];
#clock_src = "internal";
sdr_addrs = "mgmt_addr=192.168.10.2,addr=192.168.10.2,clock_source=internal,time_source=internal"
}
);
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
parallel_config = "PARALLEL_SINGLE_THREAD";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_ENABLE";
}
);
rfsimulator :
{
serveraddr = "server";
serverport = "4043";
options = (); #("saviq"); or/and "chanmod"
modelname = "AWGN";
IQfile = "/tmp/rfsimulator.iqs";
};
security = {
# preferred ciphering algorithms
# the first one of the list that an UE supports in chosen
# valid values: nea0, nea1, nea2, nea3
ciphering_algorithms = ( "nea0" );
# preferred integrity algorithms
# the first one of the list that an UE supports in chosen
# valid values: nia0, nia1, nia2, nia3
integrity_algorithms = ( "nia2", "nia0" );
# setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
# what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
drb_ciphering = "yes";
drb_integrity = "no";
};
log_config :
{
global_log_level ="info";
hw_log_level ="info";
phy_log_level ="info";
mac_log_level ="info";
rlc_log_level ="info";
pdcp_log_level ="info";
rrc_log_level ="info";
ngap_log_level ="debug";
f1ap_log_level ="debug";
};
targets/RT/USER/lte-enb.c
+6 -8
View File
@@ -112,8 +112,6 @@ extern int transmission_mode;
extern int oaisim_flag;
//uint16_t sf_ahead=4;
extern uint16_t sf_ahead;
#include "executables/thread-common.h"
//extern PARALLEL_CONF_t get_thread_parallel_conf(void);
//extern WORKER_CONF_t get_thread_worker_conf(void);
@@ -466,11 +464,11 @@ void eNB_top(PHY_VARS_eNB *eNB,
if (!oai_exit) {
T(T_ENB_MASTER_TICK, T_INT(0), T_INT(ru_proc->frame_rx), T_INT(ru_proc->tti_rx));
L1_proc->timestamp_tx = ru_proc->timestamp_rx + (sf_ahead*fp->samples_per_tti);
L1_proc->timestamp_tx = ru_proc->timestamp_rx + (ru->sf_ahead*fp->samples_per_tti);
L1_proc->frame_rx = ru_proc->frame_rx;
L1_proc->subframe_rx = ru_proc->tti_rx;
L1_proc->frame_tx = (L1_proc->subframe_rx > (9-sf_ahead)) ? (L1_proc->frame_rx+1)&1023 : L1_proc->frame_rx;
L1_proc->subframe_tx = (L1_proc->subframe_rx + sf_ahead)%10;
L1_proc->frame_tx = (L1_proc->subframe_rx > (9-ru->sf_ahead)) ? (L1_proc->frame_rx+1)&1023 : L1_proc->frame_rx;
L1_proc->subframe_tx = (L1_proc->subframe_rx + ru->sf_ahead)%10;
if (rxtx(eNB,L1_proc,string) < 0)
LOG_E(PHY,"eNB %d CC_id %d failed during execution\n",eNB->Mod_id,eNB->CC_id);
@@ -614,11 +612,11 @@ int wakeup_rxtx(PHY_VARS_eNB *eNB,
// The last (TS_rx mod samples_per_frame) was n*samples_per_tti,
// we want to generate subframe (n+sf_ahead), so TS_tx = TX_rx+sf_ahead*samples_per_tti,
// and proc->subframe_tx = proc->subframe_rx+sf_ahead
L1_proc->timestamp_tx = ru_proc->timestamp_rx + (sf_ahead*fp->samples_per_tti);
L1_proc->timestamp_tx = ru_proc->timestamp_rx + (ru->sf_ahead*fp->samples_per_tti);
L1_proc->frame_rx = ru_proc->frame_rx;
L1_proc->subframe_rx = ru_proc->tti_rx;
L1_proc->frame_tx = (L1_proc->subframe_rx > (9-sf_ahead)) ? (L1_proc->frame_rx+1)&1023 : L1_proc->frame_rx;
L1_proc->subframe_tx = (L1_proc->subframe_rx + sf_ahead)%10;
L1_proc->frame_tx = (L1_proc->subframe_rx > (9-ru->sf_ahead)) ? (L1_proc->frame_rx+1)&1023 : L1_proc->frame_rx;
L1_proc->subframe_tx = (L1_proc->subframe_rx + ru->sf_ahead)%10;
LOG_D(PHY,"wakeup_rxtx: L1_proc->subframe_rx %d, L1_proc->subframe_tx %d, RU %d\n",L1_proc->subframe_rx,L1_proc->subframe_tx,ru->idx);
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME(VCD_SIGNAL_DUMPER_VARIABLES_FRAME_NUMBER_WAKEUP_RXTX_RX_RU+ru->idx, L1_proc->frame_rx);
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME(VCD_SIGNAL_DUMPER_VARIABLES_SUBFRAME_NUMBER_WAKEUP_RXTX_RX_RU+ru->idx, L1_proc->subframe_rx);
targets/RT/USER/lte-ru.c
+9 -9
View File
@@ -107,7 +107,6 @@ const char ru_states[6][9] = {"RU_IDLE","RU_CONFIG","RU_READY","RU_RUN","RU_ERRO
extern const char NB_functions[7][20];
extern const char NB_timing[2][20];
extern uint16_t sf_ahead;
extern const char ru_if_types[MAX_RU_IF_TYPES][20];
@@ -252,8 +251,8 @@ void fh_if4p5_south_in(RU_t *ru,
// proc->timestamp_tx = proc->timestamp_rx + (4*fp->samples_per_tti);
if (get_thread_parallel_conf() == PARALLEL_SINGLE_THREAD) {
proc->tti_tx = (sf+sf_ahead)%10;
proc->frame_tx = (sf>(9-sf_ahead)) ? (f+1)&1023 : f;
proc->tti_tx = (sf+ru->sf_ahead)%10;
proc->frame_tx = (sf>(9-ru->sf_ahead)) ? (f+1)&1023 : f;
}
LOG_D(PHY,"Setting proc for (%d,%d)\n",sf,f);
@@ -652,13 +651,13 @@ void rx_rf(RU_t *ru,
if (get_thread_parallel_conf() == PARALLEL_SINGLE_THREAD && ru->fh_north_asynch_in == NULL) {
#ifdef PHY_TX_THREAD
proc->timestamp_phy_tx = proc->timestamp_rx+((sf_ahead-1)*fp->samples_per_tti);
proc->subframe_phy_tx = (proc->tti_rx+(sf_ahead-1))%10;
proc->frame_phy_tx = (proc->tti_rx>(9-(sf_ahead-1))) ? (proc->frame_rx+1)&1023 : proc->frame_rx;
proc->timestamp_phy_tx = proc->timestamp_rx+((ru->sf_ahead-1)*fp->samples_per_tti);
proc->subframe_phy_tx = (proc->tti_rx+(ru->sf_ahead-1))%10;
proc->frame_phy_tx = (proc->tti_rx>(9-(ru->sf_ahead-1))) ? (proc->frame_rx+1)&1023 : proc->frame_rx;
#else
proc->timestamp_tx = proc->timestamp_rx+(sf_ahead*fp->samples_per_tti);
proc->tti_tx = (proc->tti_rx+sf_ahead)%10;
proc->frame_tx = (proc->tti_rx>(9-sf_ahead)) ? (proc->frame_rx+1)&1023 : proc->frame_rx;
proc->timestamp_tx = proc->timestamp_rx+(ru->sf_ahead*fp->samples_per_tti);
proc->tti_tx = (proc->tti_rx+ru->sf_ahead)%10;
proc->frame_tx = (proc->tti_rx>(9-ru->sf_ahead)) ? (proc->frame_rx+1)&1023 : proc->frame_rx;
#endif
//proc->timestamp_tx = proc->timestamp_rx+(sf_ahead*fp->samples_per_tti);
//proc->subframe_tx = (proc->tti_rx+sf_ahead)%10;
@@ -3081,6 +3080,7 @@ RU_t **RCconfig_RU(int nb_RU,int nb_L1_inst,PHY_VARS_eNB ***eNB,uint64_t *ru_mas
ru[j]->nb_rx = *(RUParamList.paramarray[j][RU_NB_RX_IDX].uptr);
ru[j]->att_tx = *(RUParamList.paramarray[j][RU_ATT_TX_IDX].uptr);
ru[j]->att_rx = *(RUParamList.paramarray[j][RU_ATT_RX_IDX].uptr);
ru[j]->sf_ahead = *(RUParamList.paramarray[j][RU_SF_AHEAD].uptr);
*ru_mask= (*ru_mask)|(1<<j);
}// j=0..num_rus
}
targets/RT/USER/lte-softmodem.c
-1
View File
@@ -96,7 +96,6 @@ pthread_cond_t nfapi_sync_cond;
pthread_mutex_t nfapi_sync_mutex;
int nfapi_sync_var=-1; //!< protected by mutex \ref nfapi_sync_mutex
uint16_t sf_ahead=4;
pthread_cond_t sync_cond;
pthread_mutex_t sync_mutex;