diff --git a/ci-scripts/Jenkinsfile-GitLab-Container b/ci-scripts/Jenkinsfile-GitLab-Container index 9ff0371ae5..f5852bace5 100644 --- a/ci-scripts/Jenkinsfile-GitLab-Container +++ b/ci-scripts/Jenkinsfile-GitLab-Container @@ -198,17 +198,37 @@ pipeline { } } } - stage ("RF Simulators") { + stage ("4G RF Simulators") { when { expression {doMandatoryTests} } steps { script { - triggerSlaveJob ('RAN-RF-Sim-Test', 'Test-RF-Sim-Container') + triggerSlaveJob ('RAN-RF-Sim-Test-4G', 'Test-RF-Sim-Container-4G') } } post { always { script { - finalizeSlaveJob('RAN-RF-Sim-Test') + finalizeSlaveJob('RAN-RF-Sim-Test-4G') + } + } + failure { + script { + currentBuild.result = 'FAILURE' + } + } + } + } + stage ("5G RF Simulators") { + when { expression {doMandatoryTests} } + steps { + script { + triggerSlaveJob ('RAN-RF-Sim-Test-5G', 'Test-RF-Sim-Container-4G') + } + } + post { + always { + script { + finalizeSlaveJob('RAN-RF-Sim-Test-5G') } } failure { diff --git a/ci-scripts/Jenkinsfile-gitlab b/ci-scripts/Jenkinsfile-gitlab index df816c12a7..8f1955f265 100644 --- a/ci-scripts/Jenkinsfile-gitlab +++ b/ci-scripts/Jenkinsfile-gitlab @@ -529,52 +529,6 @@ pipeline { } } } - stage ("Test MONOLITHIC - FDD - Band 13 - B210") { - when { - expression {doFullTestsuite} - } - steps { - script { - sh "sleep 60" - triggerSlaveJob ('eNB-CI-MONO-FDD-Band13-B210', 'Test-Mono-FDD-Band13-LTE-M') - } - } - post { - always { - script { - finalizeSlaveJob('eNB-CI-MONO-FDD-Band13-B210') - } - } - failure { - script { - currentBuild.result = 'FAILURE' - } - } - } - } - stage ("Test X2 Handover - FDD - Band 13 - B210") { - when { - expression {doFullTestsuite} - } - steps { - script { - sh "sleep 60" - triggerSlaveJob ('eNB-CI-MONO-FDD-Band13-X2HO-B210', 'Test-Mono-FDD-Band13-X2-HO') - } - } - post { - always { - script { - finalizeSlaveJob('eNB-CI-MONO-FDD-Band13-X2HO-B210') - } - } - failure { - script { - currentBuild.result = 'FAILURE' - } - } - } - } stage ("Test IF4p5 - TDD - Band 38 - B210 - MultiRRU") { when { expression {doFullTestsuite} @@ -643,28 +597,6 @@ pipeline { } } } - stage ("Test OAI OCP-eNB - FDD - Band 7 - B210") { - when { - expression {doFullTestsuite} - } - steps { - script { - triggerSlaveJob ('OCPeNB-FDD-Band7-B210', 'Test-OCP-FDD-Band7') - } - } - post { - always { - script { - finalizeSlaveJob('OCPeNB-FDD-Band7-B210') - } - } - failure { - script { - currentBuild.result = 'FAILURE' - } - } - } - } } post { always { diff --git a/ci-scripts/Jenkinsfile-tmp-multi-enb-nsa b/ci-scripts/Jenkinsfile-tmp-multi-enb-nsa index a3939d832d..6e987a5e38 100644 --- a/ci-scripts/Jenkinsfile-tmp-multi-enb-nsa +++ b/ci-scripts/Jenkinsfile-tmp-multi-enb-nsa @@ -390,7 +390,7 @@ pipeline { steps { script { dir ('ci-scripts/ran_dashboard') { - sh "python3 Hdashboard.py testevent ${params.eNB_MR} ${JOB_NAME} ${env.BUILD_URL} ${env.BUILD_ID} ${StatusForDb} " + sh "python3 Hdashboard.py testevent ${params.eNB_MR} " } } } diff --git a/ci-scripts/Jenkinsfile-trig-nsa b/ci-scripts/Jenkinsfile-trig-nsa index 7b4238d678..772b34231a 100644 --- a/ci-scripts/Jenkinsfile-trig-nsa +++ b/ci-scripts/Jenkinsfile-trig-nsa @@ -27,6 +27,8 @@ def pythonExecutor = params.pythonExecutor def TARGET_BRANCH = "develop" def ALLOW_MERGE = true +def GitPostArgs = '' +def jobStatus pipeline { agent { @@ -47,63 +49,89 @@ pipeline { COMMIT_ID=sh returnStdout: true, script: """curl --silent "https://gitlab.eurecom.fr/api/v4/projects/oai%2Fopenairinterface5g/merge_requests/${MR}" | jq ".sha" || true """ COMMIT_ID=COMMIT_ID.trim() echo "Testing NSA on : ${MR} ${SRC_BRANCH} ${COMMIT_ID}" - //calling NSA B200 - build job: "RAN-NSA-B200-Module-LTEBOX", wait : true, propagate : false, parameters: [ - string(name: 'eNB_MR', value: String.valueOf(MR)), - string(name: 'eNB_Branch', value: String.valueOf(SRC_BRANCH)), - string(name: 'eNB_CommitID', value: String.valueOf(COMMIT_ID)), - string(name: 'eNB_TargetBranch', value: String.valueOf(TARGET_BRANCH)), - booleanParam(name: 'eNB_mergeRequest', value: Boolean.valueOf(ALLOW_MERGE)) - ] - //calling NSA 2x2 - build job: "RAN-NSA-2x2-Module-OAIEPC", wait : true, propagate : false, parameters: [ - string(name: 'eNB_MR', value: String.valueOf(MR)), - string(name: 'eNB_Branch', value: String.valueOf(SRC_BRANCH)), - string(name: 'eNB_CommitID', value: String.valueOf(COMMIT_ID)), - string(name: 'eNB_TargetBranch', value: String.valueOf(TARGET_BRANCH)), - booleanParam(name: 'eNB_mergeRequest', value: Boolean.valueOf(ALLOW_MERGE)) - ] - //calling LTE 2x2 - build job: "RAN-LTE-2x2-Module-OAIEPC", wait : true, propagate : false, parameters: [ - string(name: 'eNB_MR', value: String.valueOf(MR)), - string(name: 'eNB_Branch', value: String.valueOf(SRC_BRANCH)), - string(name: 'eNB_CommitID', value: String.valueOf(COMMIT_ID)), - string(name: 'eNB_TargetBranch', value: String.valueOf(TARGET_BRANCH)), - booleanParam(name: 'eNB_mergeRequest', value: Boolean.valueOf(ALLOW_MERGE)) - ] - //calling SA - build job: "RAN-SA-Module-CN5G", wait : true, propagate : false, parameters: [ - string(name: 'eNB_MR', value: String.valueOf(MR)), - string(name: 'eNB_Branch', value: String.valueOf(SRC_BRANCH)), - string(name: 'eNB_CommitID', value: String.valueOf(COMMIT_ID)), - string(name: 'eNB_TargetBranch', value: String.valueOf(TARGET_BRANCH)), - booleanParam(name: 'eNB_mergeRequest', value: Boolean.valueOf(ALLOW_MERGE)) - ] - //calling OAIUE B200 - //build job: "RAN-SA-OAIUE-B200-CN5G", wait : true, propagate : false, parameters: [ - // string(name: 'eNB_MR', value: String.valueOf(MR)), - // string(name: 'eNB_Branch', value: String.valueOf(SRC_BRANCH)), - // string(name: 'eNB_CommitID', value: String.valueOf(COMMIT_ID)), - // string(name: 'eNB_TargetBranch', value: String.valueOf(TARGET_BRANCH)), - // booleanParam(name: 'eNB_mergeRequest', value: Boolean.valueOf(ALLOW_MERGE)) - //] - //calling OAIUE N310 - //build job: "RAN-SA-OAIUE-N310-CN5G", wait : true, propagate : false, parameters: [ - // string(name: 'eNB_MR', value: String.valueOf(MR)), - // string(name: 'eNB_Branch', value: String.valueOf(SRC_BRANCH)), - // string(name: 'eNB_CommitID', value: String.valueOf(COMMIT_ID)), - // string(name: 'eNB_TargetBranch', value: String.valueOf(TARGET_BRANCH)), - // booleanParam(name: 'eNB_mergeRequest', value: Boolean.valueOf(ALLOW_MERGE)) - //] - //calling OAIUE N310-X300 - build job: "RAN-SA-OAIUE-N310-X300-CN5G", wait : true, propagate : false, parameters: [ - string(name: 'eNB_MR', value: String.valueOf(MR)), - string(name: 'eNB_Branch', value: String.valueOf(SRC_BRANCH)), - string(name: 'eNB_CommitID', value: String.valueOf(COMMIT_ID)), - string(name: 'eNB_TargetBranch', value: String.valueOf(TARGET_BRANCH)), - booleanParam(name: 'eNB_mergeRequest', value: Boolean.valueOf(ALLOW_MERGE)) - ] + commit = COMMIT_ID.replace("\"","") + GitPostArgs = MR + ' ' + commit + ' ' + echo GitPostArgs + //calling LTE 2x2 + jobName = "RAN-LTE-2x2-Module-OAIEPC" + jobStatus = build job: jobName, wait : true, propagate : false, parameters: [ + string(name: 'eNB_MR', value: String.valueOf(MR)), + string(name: 'eNB_Branch', value: String.valueOf(SRC_BRANCH)), + string(name: 'eNB_CommitID', value: String.valueOf(COMMIT_ID)), + string(name: 'eNB_TargetBranch', value: String.valueOf(TARGET_BRANCH)), + booleanParam(name: 'eNB_mergeRequest', value: Boolean.valueOf(ALLOW_MERGE)) + ] + jobResult = jobStatus.getResult() + build_url = jobStatus.getAbsoluteUrl() + build_id = jobStatus.getNumber().toString() + GitPostArgs += jobName + ' ' + build_url + ' ' + build_id + ' ' + jobResult + ' ' + echo GitPostArgs + + //calling NSA B200 + jobName = "RAN-NSA-B200-Module-LTEBOX" + jobStatus = build job: jobName, wait : true, propagate : false, parameters: [ + string(name: 'eNB_MR', value: String.valueOf(MR)), + string(name: 'eNB_Branch', value: String.valueOf(SRC_BRANCH)), + string(name: 'eNB_CommitID', value: String.valueOf(COMMIT_ID)), + string(name: 'eNB_TargetBranch', value: String.valueOf(TARGET_BRANCH)), + booleanParam(name: 'eNB_mergeRequest', value: Boolean.valueOf(ALLOW_MERGE)) + ] + jobResult = jobStatus.getResult() + build_url = jobStatus.getAbsoluteUrl() + build_id = jobStatus.getNumber().toString() + GitPostArgs += jobName + ' ' + build_url + ' ' + build_id + ' ' + jobResult + ' ' + echo GitPostArgs + + //calling NSA 2x2 + jobName = "RAN-NSA-2x2-Module-OAIEPC" + jobStatus = build job: jobName, wait : true, propagate : false, parameters: [ + string(name: 'eNB_MR', value: String.valueOf(MR)), + string(name: 'eNB_Branch', value: String.valueOf(SRC_BRANCH)), + string(name: 'eNB_CommitID', value: String.valueOf(COMMIT_ID)), + string(name: 'eNB_TargetBranch', value: String.valueOf(TARGET_BRANCH)), + booleanParam(name: 'eNB_mergeRequest', value: Boolean.valueOf(ALLOW_MERGE)) + ] + jobResult = jobStatus.getResult() + build_url = jobStatus.getAbsoluteUrl() + build_id = jobStatus.getNumber().toString() + GitPostArgs += jobName + ' ' + build_url + ' ' + build_id + ' ' + jobResult + ' ' + echo GitPostArgs + + //calling SA + jobName = "RAN-SA-Module-CN5G" + jobStatus = build job: jobName, wait : true, propagate : false, parameters: [ + string(name: 'eNB_MR', value: String.valueOf(MR)), + string(name: 'eNB_Branch', value: String.valueOf(SRC_BRANCH)), + string(name: 'eNB_CommitID', value: String.valueOf(COMMIT_ID)), + string(name: 'eNB_TargetBranch', value: String.valueOf(TARGET_BRANCH)), + booleanParam(name: 'eNB_mergeRequest', value: Boolean.valueOf(ALLOW_MERGE)) + ] + jobResult = jobStatus.getResult() + build_url = jobStatus.getAbsoluteUrl() + build_id = jobStatus.getNumber().toString() + GitPostArgs += jobName + ' ' + build_url + ' ' + build_id + ' ' + jobResult + ' ' + echo GitPostArgs + + //calling OAIUE N310-X300 + jobName = "RAN-SA-OAIUE-N310-X300-CN5G" + jobStatus = build job: jobName, wait : true, propagate : false, parameters: [ + string(name: 'eNB_MR', value: String.valueOf(MR)), + string(name: 'eNB_Branch', value: String.valueOf(SRC_BRANCH)), + string(name: 'eNB_CommitID', value: String.valueOf(COMMIT_ID)), + string(name: 'eNB_TargetBranch', value: String.valueOf(TARGET_BRANCH)), + booleanParam(name: 'eNB_mergeRequest', value: Boolean.valueOf(ALLOW_MERGE)) + ] + jobResult = jobStatus.getResult() + build_url = jobStatus.getAbsoluteUrl() + build_id = jobStatus.getNumber().toString() + GitPostArgs += jobName + ' ' + build_url + ' ' + build_id + ' ' + jobResult + ' ' + echo GitPostArgs + + //git report the test results in 1 block, at the end of the test sequence of one MR + dir ('ci-scripts/ran_dashboard') { + sh "python3 Hdashboard.py gitpost ${GitPostArgs}" + } } } } diff --git a/ci-scripts/cls_containerize.py b/ci-scripts/cls_containerize.py index db51f2647c..ba5ce49e8d 100644 --- a/ci-scripts/cls_containerize.py +++ b/ci-scripts/cls_containerize.py @@ -221,7 +221,7 @@ class Containerize(): if (self.ranAllowMerge): imageTag = 'ci-temp' if self.ranTargetBranch == 'develop': - mySSH.command('git diff HEAD..origin/develop -- docker/Dockerfile.base' + self.dockerfileprefix + ' | grep --colour=never -i INDEX', '\$', 5) + mySSH.command('git diff HEAD..origin/develop -- cmake_targets/build_oai cmake_targets/tools/build_helper docker/Dockerfile.base' + self.dockerfileprefix + ' | grep --colour=never -i INDEX', '\$', 5) result = re.search('index', mySSH.getBefore()) if result is not None: forceBaseImageBuild = True @@ -341,7 +341,7 @@ class Containerize(): # Remove all intermediate build images if self.ranAllowMerge and forceBaseImageBuild: mySSH.command(self.cli + ' image rm ' + baseImage + ':' + baseTag + ' || true', '\$', 30) - mySSH.command(self.cli + ' image rm ran-build:' + imageTag + ' || true','\$', 5) + mySSH.command(self.cli + ' image rm ran-build:' + imageTag + ' || true','\$', 30) # Cleaning any created tmp volume mySSH.command(self.cli + ' volume prune --force || true','\$', 15) mySSH.close() @@ -586,11 +586,20 @@ class Containerize(): mySSH.command('cd ' + lSourcePath + '/' + self.yamlPath[self.eNB_instance], '\$', 5) # Currently support only one mySSH.command('docker-compose --file ci-docker-compose.yml config', '\$', 5) + containerName = '' + containerToKill = False result = re.search('container_name: (?P[a-zA-Z0-9\-\_]+)', mySSH.getBefore()) if self.eNB_logFile[self.eNB_instance] == '': self.eNB_logFile[self.eNB_instance] = 'enb_' + HTML.testCase_id + '.log' if result is not None: containerName = result.group('container_name') + containerToKill = True + if containerToKill: + mySSH.command('docker inspect ' + containerName, '\$', 30) + result = re.search('Error: No such object: ' + containerName, mySSH.getBefore()) + if result is not None: + containerToKill = False + if containerToKill: mySSH.command('docker kill --signal INT ' + containerName, '\$', 30) time.sleep(5) mySSH.command('docker logs ' + containerName + ' > ' + lSourcePath + '/cmake_targets/' + self.eNB_logFile[self.eNB_instance], '\$', 30) @@ -603,20 +612,26 @@ class Containerize(): mySSH.close() # Analyzing log file! - copyin_res = mySSH.copyin(lIpAddr, lUserName, lPassWord, lSourcePath + '/cmake_targets/' + self.eNB_logFile[self.eNB_instance], '.') + if containerToKill: + copyin_res = mySSH.copyin(lIpAddr, lUserName, lPassWord, lSourcePath + '/cmake_targets/' + self.eNB_logFile[self.eNB_instance], '.') + else: + copyin_res = 0 nodeB_prefix = 'e' if (copyin_res == -1): HTML.htmleNBFailureMsg='Could not copy ' + nodeB_prefix + 'NB logfile to analyze it!' HTML.CreateHtmlTestRow('N/A', 'KO', CONST.ENB_PROCESS_NOLOGFILE_TO_ANALYZE) else: - logging.debug('\u001B[1m Analyzing ' + nodeB_prefix + 'NB logfile \u001B[0m ' + self.eNB_logFile[self.eNB_instance]) - logStatus = RAN.AnalyzeLogFile_eNB(self.eNB_logFile[self.eNB_instance], HTML) + if containerToKill: + logging.debug('\u001B[1m Analyzing ' + nodeB_prefix + 'NB logfile \u001B[0m ' + self.eNB_logFile[self.eNB_instance]) + logStatus = RAN.AnalyzeLogFile_eNB(self.eNB_logFile[self.eNB_instance], HTML) + else: + logStatus = 0 if (logStatus < 0): HTML.CreateHtmlTestRow(RAN.runtime_stats, 'KO', logStatus) else: HTML.CreateHtmlTestRow(RAN.runtime_stats, 'OK', CONST.ALL_PROCESSES_OK) # all the xNB run logs shall be on the server 0 for logCollecting - if self.eNB_serverId[self.eNB_instance] != '0': + if containerToKill and self.eNB_serverId[self.eNB_instance] != '0': mySSH.copyout(self.eNBIPAddress, self.eNBUserName, self.eNBPassword, './' + self.eNB_logFile[self.eNB_instance], self.eNBSourceCodePath + '/cmake_targets/') logging.info('\u001B[1m Undeploying OAI Object Pass\u001B[0m') @@ -689,7 +704,7 @@ class Containerize(): def CaptureOnDockerNetworks(self): cmd = 'cd ' + self.yamlPath[0] + ' && docker-compose -f docker-compose-ci.yml config | grep com.docker.network.bridge.name | sed -e "s@^.*name: @@"' networkNames = subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=10) - cmd = 'sudo nohup tshark -f "not tcp and not arp and not port 53 and not host archive.ubuntu.com and not host security.ubuntu.com"' + cmd = 'sudo nohup tshark -f "not tcp and not arp and not port 53 and not host archive.ubuntu.com and not host security.ubuntu.com and not port 2152"' for name in networkNames.split('\n'): res = re.search('rfsim', name) if res is not None: @@ -700,7 +715,7 @@ class Containerize(): logging.debug(cmd) networkNames = subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=10) - def UndeployGenObject(self, HTML): + def UndeployGenObject(self, HTML, RAN): self.exitStatus = 0 ymlPath = self.yamlPath[0].split('/') logPath = '../cmake_targets/log/' + ymlPath[1] @@ -730,8 +745,36 @@ class Containerize(): cmd = 'cd ' + self.yamlPath[0] + ' && docker logs ' + cName + ' > ' + cName + '.log 2>&1' logging.debug(cmd) deployStatus = subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=30) + fullStatus = True if anyLogs: - cmd = 'mkdir -p '+ logPath + ' && mv ' + self.yamlPath[0] + '/*.log ' + logPath + cmd = 'mkdir -p '+ logPath + ' && cp ' + self.yamlPath[0] + '/*.log ' + logPath + logging.debug(cmd) + deployStatus = subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=10) + + # Analyzing log file! + listOfPossibleRanContainers = ['enb', 'gnb', 'cu', 'du'] + for container in listOfPossibleRanContainers: + filename = self.yamlPath[0] + '/rfsim?g-oai-' + container + '.log' + cmd = 'ls ' + filename + containerStatus = True + try: + lsStatus = subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=10) + filename = str(lsStatus).strip() + except: + containerStatus = False + if not containerStatus: + continue + + logging.debug('\u001B[1m Analyzing xNB logfile ' + filename + ' \u001B[0m') + # For the moment just assume this exists + logStatus = RAN.AnalyzeLogFile_eNB(filename, HTML) + if (logStatus < 0): + fullStatus = False + HTML.CreateHtmlTestRow(RAN.runtime_stats, 'KO', logStatus) + else: + HTML.CreateHtmlTestRow(RAN.runtime_stats, 'OK', CONST.ALL_PROCESSES_OK) + + cmd = 'rm ' + self.yamlPath[0] + '/*.log' logging.debug(cmd) deployStatus = subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=10) if self.tsharkStarted: @@ -747,6 +790,7 @@ class Containerize(): logging.debug(cmd) copyStatus = subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=10) + logging.debug('\u001B[1m Undeploying \u001B[0m') cmd = 'cd ' + self.yamlPath[0] + ' && docker-compose -f docker-compose-ci.yml down' logging.debug(cmd) try: @@ -763,8 +807,12 @@ class Containerize(): logging.debug(cmd) deployStatus = subprocess.check_output(cmd, shell=True, stderr=subprocess.STDOUT, universal_newlines=True, timeout=100) - HTML.CreateHtmlTestRow('n/a', 'OK', CONST.ALL_PROCESSES_OK) - logging.info('\u001B[1m Undeploying OAI Object(s) PASS\u001B[0m') + if fullStatus: + HTML.CreateHtmlTestRow('n/a', 'OK', CONST.ALL_PROCESSES_OK) + logging.info('\u001B[1m Undeploying OAI Object(s) PASS\u001B[0m') + else: + HTML.CreateHtmlTestRow('n/a', 'KO', CONST.ALL_PROCESSES_OK) + logging.info('\u001B[1m Undeploying OAI Object(s) FAIL\u001B[0m') def PingFromContainer(self, HTML): self.exitStatus = 0 diff --git a/ci-scripts/conf_files/enb.band38.lte_2x2_tm2.100PRB.usrpn310.conf b/ci-scripts/conf_files/enb.band38.lte_2x2_tm2.100PRB.usrpn310.conf new file mode 100644 index 0000000000..f116c3708d --- /dev/null +++ b/ci-scripts/conf_files/enb.band38.lte_2x2_tm2.100PRB.usrpn310.conf @@ -0,0 +1,281 @@ +Active_eNBs = ( "eNB-Eurecom-B38"); +# Asn1_verbosity, choice in: none, info, annoying +Asn1_verbosity = "none"; + +eNBs = +( + { + ////////// Identification parameters: + eNB_ID = 0xe02; + + cell_type = "CELL_MACRO_ENB"; + + eNB_name = "eNB-Eurecom-B38"; + + // Tracking area code, 0x0000 and 0xfffe are reserved values + tracking_area_code = 1; + plmn_list = ( { mcc = 208; mnc = 97; mnc_length = 2; } ); + + tr_s_preference = "local_mac" + + ////////// Physical parameters: + + component_carriers = ( + { + node_function = "3GPP_eNODEB"; + node_timing = "synch_to_ext_device"; + node_synch_ref = 0; + frame_type = "TDD"; + tdd_config = 1; + tdd_config_s = 0; + prefix_type = "NORMAL"; + eutra_band = 38; + downlink_frequency = 2605000000L; + nr_scg_ssb_freq = 624608; + uplink_frequency_offset = 0; + Nid_cell = 0; + N_RB_DL = 100; + Nid_cell_mbsfn = 0; + nb_antenna_ports = 2; + nb_antennas_tx = 2; + nb_antennas_rx = 2; + tx_gain = 90; + rx_gain = 125; + pbch_repetition = "FALSE"; + prach_root = 0; + prach_config_index = 0; + prach_high_speed = "DISABLE"; + prach_zero_correlation = 1; + prach_freq_offset = 2; + pucch_delta_shift = 1; + pucch_nRB_CQI = 0; + pucch_nCS_AN = 0; + pucch_n1_AN = 0; + pdsch_referenceSignalPower = -29; + pdsch_p_b = 0; + pusch_n_SB = 1; + pusch_enable64QAM = "DISABLE"; + pusch_hoppingMode = "interSubFrame"; + pusch_hoppingOffset = 0; + pusch_groupHoppingEnabled = "ENABLE"; + pusch_groupAssignment = 0; + pusch_sequenceHoppingEnabled = "DISABLE"; + pusch_nDMRS1 = 1; + phich_duration = "NORMAL"; + phich_resource = "ONESIXTH"; + srs_enable = "DISABLE"; + /* srs_BandwidthConfig =; + srs_SubframeConfig =; + srs_ackNackST =; + srs_MaxUpPts =;*/ + + pusch_p0_Nominal = -96; + pusch_alpha = "AL1"; + pucch_p0_Nominal = -104; + msg3_delta_Preamble = 6; + pucch_deltaF_Format1 = "deltaF2"; + pucch_deltaF_Format1b = "deltaF3"; + pucch_deltaF_Format2 = "deltaF0"; + pucch_deltaF_Format2a = "deltaF0"; + pucch_deltaF_Format2b = "deltaF0"; + + rach_numberOfRA_Preambles = 64; + rach_preamblesGroupAConfig = "DISABLE"; + /* + rach_sizeOfRA_PreamblesGroupA = ; + rach_messageSizeGroupA = ; + rach_messagePowerOffsetGroupB = ; + */ + rach_powerRampingStep = 4; + rach_preambleInitialReceivedTargetPower = -108; + rach_preambleTransMax = 10; + rach_raResponseWindowSize = 10; + rach_macContentionResolutionTimer = 48; + rach_maxHARQ_Msg3Tx = 4; + + pcch_default_PagingCycle = 128; + pcch_nB = "oneT"; + bcch_modificationPeriodCoeff = 2; + ue_TimersAndConstants_t300 = 1000; + ue_TimersAndConstants_t301 = 1000; + ue_TimersAndConstants_t310 = 1000; + ue_TimersAndConstants_t311 = 10000; + ue_TimersAndConstants_n310 = 20; + ue_TimersAndConstants_n311 = 1; + ue_TransmissionMode = 2; + + //Parameters for SIB18 + rxPool_sc_CP_Len = "normal"; + rxPool_sc_Period = "sf40"; + rxPool_data_CP_Len = "normal"; + rxPool_ResourceConfig_prb_Num = 20; + rxPool_ResourceConfig_prb_Start = 5; + rxPool_ResourceConfig_prb_End = 44; + rxPool_ResourceConfig_offsetIndicator_present = "prSmall"; + rxPool_ResourceConfig_offsetIndicator_choice = 0; + rxPool_ResourceConfig_subframeBitmap_present = "prBs40"; + rxPool_ResourceConfig_subframeBitmap_choice_bs_buf = "00000000000000000000"; + rxPool_ResourceConfig_subframeBitmap_choice_bs_size = 5; + rxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused = 0; +/* rxPool_dataHoppingConfig_hoppingParameter = 0; + rxPool_dataHoppingConfig_numSubbands = "ns1"; + rxPool_dataHoppingConfig_rbOffset = 0; + rxPool_commTxResourceUC-ReqAllowed = "TRUE"; +*/ + // Parameters for SIB19 + discRxPool_cp_Len = "normal" + discRxPool_discPeriod = "rf32" + discRxPool_numRetx = 1; + discRxPool_numRepetition = 2; + discRxPool_ResourceConfig_prb_Num = 5; + discRxPool_ResourceConfig_prb_Start = 3; + discRxPool_ResourceConfig_prb_End = 21; + discRxPool_ResourceConfig_offsetIndicator_present = "prSmall"; + discRxPool_ResourceConfig_offsetIndicator_choice = 0; + discRxPool_ResourceConfig_subframeBitmap_present = "prBs40"; + discRxPool_ResourceConfig_subframeBitmap_choice_bs_buf = "f0ffffffff"; + discRxPool_ResourceConfig_subframeBitmap_choice_bs_size = 5; + discRxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused = 0; + + } + ); + + + srb1_parameters : + { + # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500] + timer_poll_retransmit = 80; + + # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200] + timer_reordering = 35; + + # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500] + timer_status_prohibit = 0; + + # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)] + poll_pdu = 4; + + # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)] + poll_byte = 99999; + + # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32] + max_retx_threshold = 4; + } + + # ------- SCTP definitions + SCTP : + { + # Number of streams to use in input/output + SCTP_INSTREAMS = 2; + SCTP_OUTSTREAMS = 2; + }; + + + ////////// MME parameters: + mme_ip_address = ( { ipv4 = "CI_MME_IP_ADDR"; + ipv6 = "192:168:30::17"; + active = "yes"; + preference = "ipv4"; + } + ); + + enable_measurement_reports = "no"; + + ///X2 + enable_x2 = "yes"; + t_reloc_prep = 1000; /* unit: millisecond */ + tx2_reloc_overall = 2000; /* unit: millisecond */ + t_dc_prep = 1000; /* unit: millisecond */ + t_dc_overall = 2000; /* unit: millisecond */ + + NETWORK_INTERFACES : + { + ENB_INTERFACE_NAME_FOR_S1_MME = "eno1"; + ENB_IPV4_ADDRESS_FOR_S1_MME = "CI_ENB_IP_ADDR"; + ENB_INTERFACE_NAME_FOR_S1U = "eno1"; + ENB_IPV4_ADDRESS_FOR_S1U = "CI_ENB_IP_ADDR"; + ENB_PORT_FOR_S1U = 2152; # Spec 2152 + ENB_IPV4_ADDRESS_FOR_X2C = "CI_ENB_IP_ADDR"; + ENB_PORT_FOR_X2C = 36422; # Spec 36422 + }; + } +); + +MACRLCs = ( + { + num_cc = 1; + tr_s_preference = "local_L1"; + tr_n_preference = "local_RRC"; + phy_test_mode = 0; + scheduler_mode = "fairRR"; + bler_target_upper = 20.0; + bler_target_lower = 10.0; + max_ul_rb_index = 27; + puSch10xSnr = 200; + puCch10xSnr = 150; + } +); + +L1s = ( + { + num_cc = 1; + tr_n_preference = "local_mac"; + prach_dtx_threshold = 200; + pucch1_dtx_threshold = 5 + pucch1ab_dtx_threshold =0; + } +); + +RUs = ( + { + local_rf = "yes" + nb_tx = 2 + nb_rx = 2 + att_tx = 0 + att_rx = 0; + bands = [38]; + max_pdschReferenceSignalPower = -27; + max_rxgain = 75; + eNB_instances = [0]; + sdr_addrs = "mgmt_addr=192.168.18.241,addr=192.168.20.2,second_addr=192.168.10.2"; + + } +); + +THREAD_STRUCT = ( + { + #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT" + parallel_config = "PARALLEL_SINGLE_THREAD"; + #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE" + worker_config = "WORKER_ENABLE"; + } +); + +NETWORK_CONTROLLER : +{ + FLEXRAN_ENABLED = "no"; + FLEXRAN_INTERFACE_NAME = "lo"; + FLEXRAN_IPV4_ADDRESS = "127.0.0.1"; + FLEXRAN_PORT = 2210; + FLEXRAN_CACHE = "/mnt/oai_agent_cache"; + FLEXRAN_AWAIT_RECONF = "no"; +}; + + log_config : + { + global_log_level ="info"; + global_log_verbosity ="medium"; + hw_log_level ="info"; + hw_log_verbosity ="medium"; + phy_log_level ="info"; + phy_log_verbosity ="medium"; + mac_log_level ="info"; + mac_log_verbosity ="high"; + rlc_log_level ="info"; + rlc_log_verbosity ="medium"; + pdcp_log_level ="info"; + pdcp_log_verbosity ="medium"; + rrc_log_level ="info"; + rrc_log_verbosity ="medium"; + }; + diff --git a/ci-scripts/conf_files/gNB_SA_n78_106PRB.2x2_usrpn310.conf b/ci-scripts/conf_files/gNB_SA_n78_106PRB.2x2_usrpn310.conf index 77693d5f72..16f72c68e5 100644 --- a/ci-scripts/conf_files/gNB_SA_n78_106PRB.2x2_usrpn310.conf +++ b/ci-scripts/conf_files/gNB_SA_n78_106PRB.2x2_usrpn310.conf @@ -232,7 +232,7 @@ L1s = ( { num_cc = 1; tr_n_preference = "local_mac"; - pusch_proc_threads = 2; + pusch_proc_threads = 8; prach_dtx_threshold = 120; pucch0_dtx_threshold = 150; } diff --git a/ci-scripts/conf_files/gNB_SA_n78_133PRB.2x2_usrpn310.conf b/ci-scripts/conf_files/gNB_SA_n78_133PRB.2x2_usrpn310.conf index c9b369eaff..1a940a51c4 100644 --- a/ci-scripts/conf_files/gNB_SA_n78_133PRB.2x2_usrpn310.conf +++ b/ci-scripts/conf_files/gNB_SA_n78_133PRB.2x2_usrpn310.conf @@ -229,7 +229,7 @@ L1s = ( { num_cc = 1; tr_n_preference = "local_mac"; - pusch_proc_threads = 2; + pusch_proc_threads = 8; prach_dtx_threshold = 120; } ); diff --git a/ci-scripts/constants.py b/ci-scripts/constants.py index bb110bc0e8..3c05675928 100644 --- a/ci-scripts/constants.py +++ b/ci-scripts/constants.py @@ -44,6 +44,7 @@ ENB_PROCESS_ASSERTION = -12 ENB_PROCESS_REALTIME_ISSUE = -13 ENB_PROCESS_NOLOGFILE_TO_ANALYZE = -14 ENB_PROCESS_SLAVE_RRU_NOT_SYNCED = -15 +ENB_REAL_TIME_PROCESSING_ISSUE = -16 HSS_PROCESS_FAILED = -2 HSS_PROCESS_OK = +2 MME_PROCESS_FAILED = -3 diff --git a/ci-scripts/datalog_rt_stats.2x2.yaml b/ci-scripts/datalog_rt_stats.2x2.yaml new file mode 100644 index 0000000000..9e2b66862d --- /dev/null +++ b/ci-scripts/datalog_rt_stats.2x2.yaml @@ -0,0 +1,35 @@ +#this is a configuration file +#used to build real time processing statistics +#for 5G NR phy test (gNB terminate) +Title : Processing Time (us) +ColNames : + - Metric + - Average + - Max + - Average vs Reference Deviation (Reference Value ; Acceptability Threshold) +Ref : + feprx : 120.0 + feptx_prec : 8.0 + feptx_ofdm : 50.0 + feptx_total : 75.0 + L1 Tx processing thread 0 : 300.0 + L1 Tx processing thread 1 : 300.0 + DLSCH encoding : 230.0 + L1 Rx processing : 175.0 + PUSCH inner-receiver : 100.0 + PUSCH decoding : 180.0 + DL & UL scheduling timing stats : 37.0 + UL Indication : 38.0 +Threshold : + feprx : 1.25 + feptx_prec : 1.25 + feptx_ofdm : 1.25 + feptx_total : 1.25 + L1 Tx processing thread 0 : 1.25 + L1 Tx processing thread 1 : 1.25 + DLSCH encoding : 1.25 + L1 Rx processing : 1.25 + PUSCH inner-receiver : 1.25 + PUSCH decoding : 1.25 + DL & UL scheduling timing stats : 1.25 + UL Indication : 1.25 diff --git a/ci-scripts/datalog_rt_stats.yaml b/ci-scripts/datalog_rt_stats.default.yaml similarity index 100% rename from ci-scripts/datalog_rt_stats.yaml rename to ci-scripts/datalog_rt_stats.default.yaml diff --git a/ci-scripts/epc.py b/ci-scripts/epc.py index a7d923ca90..9ed9f06d8e 100644 --- a/ci-scripts/epc.py +++ b/ci-scripts/epc.py @@ -133,7 +133,7 @@ class EPCManagement(): mySSH.open(self.IPAddress, self.UserName, self.Password) if re.match('OAI-Rel14-Docker', self.Type, re.IGNORECASE): logging.debug('Using the OAI EPC Release 14 MME in Docker') - mySSH.command('docker exec -d ' + self.containerPrefix + '-oai-mme /bin/bash -c "nohup tshark -i eth0 -i lo:s10 -w /tmp/mme_check_run.pcap 2>&1 > /dev/null"', '\$', 5) + mySSH.command('docker exec -d ' + self.containerPrefix + '-oai-mme /bin/bash -c "nohup tshark -i eth0 -i lo:s10 -f "not port 2152" -w /tmp/mme_check_run.pcap 2>&1 > /dev/null"', '\$', 5) time.sleep(5) mySSH.command('docker exec -d ' + self.containerPrefix + '-oai-mme /bin/bash -c "nohup ./bin/oai_mme -c ./etc/' + self.mmeConfFile + ' > mme_check_run.log 2>&1"', '\$', 5) elif re.match('OAI-Rel14-CUPS', self.Type, re.IGNORECASE): @@ -198,8 +198,8 @@ class EPCManagement(): mySSH.open(self.IPAddress, self.UserName, self.Password) if re.match('OAI-Rel14-Docker', self.Type, re.IGNORECASE): logging.debug('Using the OAI EPC Release 14 SPGW-CUPS in Docker') - mySSH.command('docker exec -d ' + self.containerPrefix + '-oai-spgwc /bin/bash -c "nohup tshark -i eth0 -i lo:p5c -i lo:s5c -w /tmp/spgwc_check_run.pcap 2>&1 > /dev/null"', '\$', 5) - mySSH.command('docker exec -d ' + self.containerPrefix + '-oai-spgwu-tiny /bin/bash -c "nohup tshark -i eth0 -w /tmp/spgwu_check_run.pcap 2>&1 > /dev/null"', '\$', 5) + mySSH.command('docker exec -d ' + self.containerPrefix + '-oai-spgwc /bin/bash -c "nohup tshark -i eth0 -i lo:p5c -i lo:s5c -f "not port 2152" -w /tmp/spgwc_check_run.pcap 2>&1 > /dev/null"', '\$', 5) + mySSH.command('docker exec -d ' + self.containerPrefix + '-oai-spgwu-tiny /bin/bash -c "nohup tshark -i eth0 -f "not port 2152" -w /tmp/spgwu_check_run.pcap 2>&1 > /dev/null"', '\$', 5) time.sleep(5) mySSH.command('docker exec -d ' + self.containerPrefix + '-oai-spgwc /bin/bash -c "nohup ./bin/oai_spgwc -o -c ./etc/spgw_c.conf > spgwc_check_run.log 2>&1"', '\$', 5) time.sleep(5) @@ -532,6 +532,7 @@ class EPCManagement(): logging.debug('Terminating OAI CN5G') mySSH.command('cd /opt/oai-cn5g-fed/docker-compose', '\$', 5) mySSH.command('./core-network.sh stop nrf spgwu', '\$', 60) + mySSH.command('docker volume prune --force || true', '\$', 60) time.sleep(2) mySSH.command('tshark -r /tmp/oai-cn5g.pcap | egrep --colour=never "Tracking area update" ','\$', 30) result = re.search('Tracking area update request', mySSH.getBefore()) @@ -760,6 +761,7 @@ class EPCManagement(): nbContainers += 1 mySSH.command('docker-compose down', '\$', 60) + mySSH.command('docker volume prune --force || true', '\$', 60) mySSH.command('docker inspect --format=\'{{.State.Health.Status}}\' ' + listOfContainers, '\$', 10) noMoreContainerNb = mySSH.getBefore().count('No such object') mySSH.command('docker inspect --format=\'{{.Name}}\' prod-oai-public-net prod-oai-private-net', '\$', 10) diff --git a/ci-scripts/main.py b/ci-scripts/main.py index 3a5a69573d..d8cad1c962 100644 --- a/ci-scripts/main.py +++ b/ci-scripts/main.py @@ -155,6 +155,11 @@ def GetParametersFromXML(action): elif action == 'Initialize_eNB': RAN.eNB_Trace=test.findtext('eNB_Trace') RAN.eNB_Stats=test.findtext('eNB_Stats') + datalog_rt_stats_file=test.findtext('rt_stats_cfg') + if datalog_rt_stats_file is None: + RAN.datalog_rt_stats_file='datalog_rt_stats.default.yaml' + else: + RAN.datalog_rt_stats_file=datalog_rt_stats_file RAN.Initialize_eNB_args=test.findtext('Initialize_eNB_args') eNB_instance=test.findtext('eNB_instance') USRPIPAddress=test.findtext('USRP_IPAddress') @@ -909,7 +914,7 @@ elif re.match('^TesteNB$', mode, re.IGNORECASE) or re.match('^TestUE$', mode, re if CONTAINERS.exitStatus==1: RAN.prematureExit = True elif action == 'UndeployGenObject': - CONTAINERS.UndeployGenObject(HTML) + CONTAINERS.UndeployGenObject(HTML, RAN) if CONTAINERS.exitStatus==1: RAN.prematureExit = True elif action == 'PingFromContainer': diff --git a/ci-scripts/ran.py b/ci-scripts/ran.py index 4caa876719..baf3a00725 100644 --- a/ci-scripts/ran.py +++ b/ci-scripts/ran.py @@ -92,6 +92,7 @@ class RANManagement(): self.epcPcapFile = '' self.runtime_stats= '' self.datalog_rt_stats={} + self.datalog_rt_stats_file='datalog_rt_stats.default.yaml' self.eNB_Trace = '' #if 'yes', Tshark will be launched at initialization self.eNB_Stats = '' #if 'yes', Statistics Monitor will be launched at initialization self.USRPIPAddress = '' @@ -159,6 +160,7 @@ class RANManagement(): # Raphael: here add a check if git clone or git fetch went smoothly mySSH.command('git config user.email "jenkins@openairinterface.org"', '\$', 5) mySSH.command('git config user.name "OAI Jenkins"', '\$', 5) + mySSH.command('git advice.detachedHead false', '\$', 5) # Checking the BUILD INFO file if not self.backgroundBuild: mySSH.command('ls *.txt', '\$', 5) @@ -203,6 +205,7 @@ class RANManagement(): else: logging.debug('Merging with the target branch: ' + self.ranTargetBranch) mySSH.command('git merge --ff origin/' + self.ranTargetBranch + ' -m "Temporary merge for CI"', '\$', 5) + logging.debug(mySSH.getBefore()) # print what git said when merging/checking out mySSH.command('source oaienv', '\$', 5) mySSH.command('cd cmake_targets', '\$', 5) mySSH.command('mkdir -p log', '\$', 5) @@ -212,6 +215,7 @@ class RANManagement(): mySSH.command('echo "./build_oai ' + self.Build_eNB_args + '" > ./my-lte-softmodem-build.sh', '\$', 5) mySSH.command('chmod 775 ./my-lte-softmodem-build.sh', '\$', 5) mySSH.command('echo ' + lPassWord + ' | sudo -S ls', '\$', 5) + logging.debug(mySSH.getBefore()) # print current directory contents for verification mySSH.command('echo $USER; nohup sudo -E ./my-lte-softmodem-build.sh' + ' > ' + lSourcePath + '/cmake_targets/compile_oai_enb.log ' + ' 2>&1 &', lUserName, 5) mySSH.close() HTML.CreateHtmlTestRow(self.Build_eNB_args, 'OK', CONST.ALL_PROCESSES_OK) @@ -371,10 +375,11 @@ class RANManagement(): result = re.search('interfaceToUse=(?P[a-zA-Z0-9\-\_]+)done', mySSH.getBefore()) if result is not None: eth_interface = result.group('eth_interface') - logging.debug('\u001B[1m Launching tshark on interface ' + eth_interface + '\u001B[0m') + fltr = 'port 38412 or port 36412 or port 36422' # NGAP, S1AP, X2AP + logging.debug('\u001B[1m Launching tshark on interface ' + eth_interface + ' with filter "' + fltr + '"\u001B[0m') pcapfile = pcapfile_prefix + self.testCase_id + '_log.pcap' mySSH.command('echo ' + lPassWord + ' | sudo -S rm -f /tmp/' + pcapfile , '\$', 5) - mySSH.command('echo $USER; nohup sudo -E tshark -i ' + eth_interface + ' -w /tmp/' + pcapfile + ' > /dev/null 2>&1 &','\$', 5) + mySSH.command('echo $USER; nohup sudo -E tshark -i ' + eth_interface + ' -f "' + fltr + '" -w /tmp/' + pcapfile + ' > /dev/null 2>&1 &','\$', 5) mySSH.close() @@ -390,10 +395,11 @@ class RANManagement(): result = re.search('interfaceToUse=(?P[a-zA-Z0-9\-\_]+)done', mySSH.getBefore()) if result is not None: eth_interface = result.group('eth_interface') - logging.debug('\u001B[1m Launching tshark on interface ' + eth_interface + '\u001B[0m') + fltr = 'port 38412 or port 36412 or port 36422' # NGAP, S1AP, X2AP + logging.debug('\u001B[1m Launching tshark on interface ' + eth_interface + ' with filter "' + fltr + '"\u001B[0m') self.epcPcapFile = 'enb_' + self.testCase_id + '_s1log.pcap' mySSH.command('echo ' + localEpcPassword + ' | sudo -S rm -f /tmp/' + self.epcPcapFile , '\$', 5) - mySSH.command('echo $USER; nohup sudo tshark -f "host ' + lIpAddr +'" -i ' + eth_interface + ' -w /tmp/' + self.epcPcapFile + ' > /tmp/tshark.log 2>&1 &', localEpcUserName, 5) + mySSH.command('echo $USER; nohup sudo tshark -f "host ' + lIpAddr +'" -i ' + eth_interface + ' -f "' + fltr + '" -w /tmp/' + self.epcPcapFile + ' > /tmp/tshark.log 2>&1 &', localEpcUserName, 5) mySSH.close() mySSH.open(lIpAddr, lUserName, lPassWord) mySSH.command('cd ' + lSourcePath, '\$', 5) @@ -717,6 +723,9 @@ class RANManagement(): logStatus = self.AnalyzeLogFile_eNB(fileToAnalyze, HTML) if (logStatus < 0): HTML.CreateHtmlTestRow('N/A', 'KO', logStatus) + #display rt stats for gNB only + if len(self.datalog_rt_stats)!=0 and nodeB_prefix == 'g': + HTML.CreateHtmlDataLogTable(self.datalog_rt_stats) self.prematureExit = True self.eNBmbmsEnables[int(self.eNB_instance)] = False return @@ -738,7 +747,10 @@ class RANManagement(): mySSH.command('echo ' + self.eNBPassword + ' | sudo -S mv /tmp/enb_*.pcap .','\$',20) mySSH.command('echo ' + self.eNBPassword + ' | sudo -S mv /tmp/gnb_*.pcap .','\$',20) mySSH.command('echo ' + self.eNBPassword + ' | sudo -S rm -f enb.log.zip', '\$', 5) - mySSH.command('echo ' + self.eNBPassword + ' | sudo -S zip enb.log.zip enb*.log core* enb_*record.raw enb_*.pcap gnb_*.pcap enb_*txt physim_*.log *stats.log *monitor.pickle *monitor*.png ping*.log.png log/*/*.log log/*/*.pcap', '\$', 60) + mySSH.command('echo ' + self.eNBPassword + ' | sudo -S zip enb.log.zip enb*.log enb_*record.raw enb_*.pcap gnb_*.pcap enb_*txt physim_*.log *stats.log *monitor.pickle *monitor*.png ping*.log.png log/*/*.log log/*/*.pcap', '\$', 60) + result = re.search('core.\d+', mySSH.getBefore()) + if result is not None: + mySSH.command('echo ' + self.eNBPassword + ' | sudo -S zip enb.log.zip core* ran_build/build/{lte,nr}-softmodem', '\$', 60) # add core and executable to zip mySSH.command('echo ' + self.eNBPassword + ' | sudo -S rm enb*.log core* enb_*record.raw enb_*.pcap gnb_*.pcap enb_*txt physim_*.log *stats.log *monitor.pickle *monitor*.png ping*.log.png log/*/*.log log/*/*.pcap', '\$', 15) mySSH.close() @@ -802,6 +814,7 @@ class RANManagement(): #NSA specific log markers nsa_markers ={'SgNBReleaseRequestAcknowledge': [],'FAILURE': [], 'scgFailureInformationNR-r15': [], 'SgNBReleaseRequest': []} nodeB_prefix_found = False + RealTimeProcessingIssue = False line_cnt=0 #log file line counter for line in enb_log_file.readlines(): @@ -1003,7 +1016,7 @@ class RANManagement(): #the following part takes the *_stats.log files as source (not the stdout log file) #the datalog config file has to be loaded - datalog_rt_stats_file='datalog_rt_stats.yaml' + datalog_rt_stats_file=self.datalog_rt_stats_file if (os.path.isfile(datalog_rt_stats_file)): yaml_file=datalog_rt_stats_file elif (os.path.isfile('ci-scripts/'+datalog_rt_stats_file)): @@ -1016,12 +1029,9 @@ class RANManagement(): datalog_rt_stats = yaml.load(f,Loader=yaml.FullLoader) rt_keys = datalog_rt_stats['Ref'] #we use the keys from the Ref field - if (os.path.isfile('./nrL1_stats.log')) and (os.path.isfile('./nrL1_stats.log')): - stat_files_present=True - else: - stat_files_present=False - logging.debug("NR Stats files for RT analysis not found") - if stat_files_present: + if os.path.isfile('./nrL1_stats.log') and os.path.isfile('./nrMAC_stats.log'): + # don't use CI-nrL1_stats.log, as this will increase the processing time for + # no reason, we just need the last occurence nrL1_stats = open('./nrL1_stats.log', 'r') nrMAC_stats = open('./nrMAC_stats.log', 'r') for line in nrL1_stats.readlines(): @@ -1042,6 +1052,8 @@ class RANManagement(): real_time_stats[k]=tmp.group(1) nrL1_stats.close() nrMAC_stats.close() + else: + logging.debug("NR Stats files for RT analysis not found") #stdout log file and stat log files analysis completed logging.debug(' File analysis (stdout, stats) completed') @@ -1120,8 +1132,7 @@ class RANManagement(): #check if there is a fail => will render the test as failed for k in datalog_rt_stats['Data']: if float(datalog_rt_stats['Data'][k][2])> datalog_rt_stats['Threshold'][k]: #condition for fail : avg/ref is greater than the fixed threshold - #setting prematureExit is ok although not the best option - self.prematureExit=False #temp for debug : do not stop the test if RT stats are excedeed + RealTimeProcessingIssue = True else: statMsg = 'No real time stats found in the log file\n' logging.debug('No real time stats found in the log file') @@ -1155,7 +1166,10 @@ class RANManagement(): logging.debug(statMsg) htmleNBFailureMsg += htmlMsg - + if RealTimeProcessingIssue: + logging.debug('\u001B[1;37;41m ' + nodeB_prefix + 'NB ended with real time processing issue! \u001B[0m') + htmleNBFailureMsg += 'Fail due to real time processing issue\n' + global_status = CONST.ENB_REAL_TIME_PROCESSING_ISSUE if uciStatMsgCount > 0: statMsg = nodeB_prefix + 'NB showed ' + str(uciStatMsgCount) + ' "uci->stat" message(s)' logging.debug('\u001B[1;30;43m ' + statMsg + ' \u001B[0m') diff --git a/ci-scripts/ran_dashboard/Hdashboard.py b/ci-scripts/ran_dashboard/Hdashboard.py index 0cfae97c76..864e31fc1f 100644 --- a/ci-scripts/ran_dashboard/Hdashboard.py +++ b/ci-scripts/ran_dashboard/Hdashboard.py @@ -509,46 +509,87 @@ class Dashboard: s3.meta.client.copy(copy_source, 'oaitestdashboard', path+'/'+ 'test_styles.css') - def PostGitNote(self,mr,jobname,buildurl,buildid,status): - gl = gitlab.Gitlab.from_config('OAI') - project_id = 223 - project = gl.projects.get(project_id) - editable_mr = project.mergerequests.get(int(mr)) - mr_notes = editable_mr.notes.list() - mr_note = editable_mr.notes.create({ - 'body': 'Completed Test : '+jobname+', status: '+status+', '+\ - '('+buildid+')
'+\ - 'Consolidated Test Results' - }) - editable_mr.save() + def PostGitNote(self,mr,commit,args): + #current date and time to be posted with test results + #now = datetime.now() + #dt_string = now.strftime("%d/%m/%Y %H:%M") + + if len(args)%4 != 0: + print("Wrong Number of Arguments") + return + else : + n_tests=len(args)//4 + + gl = gitlab.Gitlab.from_config('OAI') + project_id = 223 + project = gl.projects.get(project_id) + + #retrieve all the notes from the MR + editable_mr = project.mergerequests.get(int(mr)) + mr_notes = editable_mr.notes.list(all=True) + + body = 'Consolidated Test Results
'+\ + 'Tested CommitID: ' + commit + '
' + + for i in range(0,n_tests): + jobname = args[4*i] + buildurl = args[4*i+1] + buildid = args[4*i+2] + status = args[4*i+3] + body += jobname+', status is '+status+', ('+buildid+')
' + + #create new note + mr_note = editable_mr.notes.create({ + 'body': body + }) + editable_mr.save() + + def main(): - #call from Jenkinsfile : sh "python3 Hdashboard.py testevent ${params.eNB_MR} ${JOB_NAME} ${env.BUILD_URL} ${env.BUILD_ID} ${StatusForDb} " + #call from slave Jenkinsfile : sh "python3 Hdashboard.py testevent ${params.eNB_MR} " + #call from master Jenkinsfile : sh "python3 Hdashboard.py gitpost ${GitPostArgs}" + - #individual MR test results + test dashboard, event based (end of jenkins pipeline) if len(sys.argv)>1: + + #individual MR test results + test dashboard, event based (end of slave jenkins pipeline) if sys.argv[1]=="testevent" : mr=sys.argv[2] - jobname=sys.argv[3] - buildurl=sys.argv[4] - buildid=sys.argv[5] - status=sys.argv[6] htmlDash=Dashboard() if mr in htmlDash.mr_list: + #single MR test results htmlDash.Build('singleMR',mr,'/tmp/MR'+mr+'_index.html') htmlDash.CopyToS3('/tmp/MR'+mr+'_index.html','oaitestdashboard','MR'+mr+'/index.html') + #all MR test results htmlDash.Build('Tests','0000','/tmp/Tests_index.html') htmlDash.CopyToS3('/tmp/Tests_index.html','oaitestdashboard','index.html') - htmlDash.PostGitNote(mr,jobname,buildurl,buildid,status) + + #git post with MR test results, event based (end of master jenkins pipeline) + elif sys.argv[1]=="gitpost": + mr=sys.argv[2] + commit=sys.argv[3] + args=[] + for i in range (4, len(sys.argv)): #jobname, url, id , result + args.append(sys.argv[i]) + htmlDash=Dashboard() + if mr in htmlDash.mr_list: + htmlDash.PostGitNote(mr,commit, args) else: print("Not a Merge Request => this build is for testing/debug purpose, no report to git") - #test and MR status dash boards, cron based + else: + print("Wrong argument at position 1") + + + #test and MR status dashboards, cron based else: htmlDash=Dashboard() + #all MR status dashboard htmlDash.Build('MR','0000','/tmp/MR_index.html') htmlDash.CopyToS3('/tmp/MR_index.html','oairandashboard','index.html') + #all MR test results htmlDash.Build('Tests','0000','/tmp/Tests_index.html') htmlDash.CopyToS3('/tmp/Tests_index.html','oaitestdashboard','index.html') diff --git a/ci-scripts/sshconnection.py b/ci-scripts/sshconnection.py index 67e0b832e6..d5b4a4c83e 100644 --- a/ci-scripts/sshconnection.py +++ b/ci-scripts/sshconnection.py @@ -157,22 +157,24 @@ class SSHConnection(): if not silent: logging.debug(commandline) self.cmd2Results = '' + noHistoryCmd = 'unset HISTFILE; ' + commandline myHost = self.username + '@' + self.ipaddress # CAUTION: THIS METHOD IMPLIES THAT THERE ARE VALID SSH KEYS # BETWEEN THE PYTHON EXECUTOR NODE AND THE REMOTE HOST # OTHERWISE IT WON'T WORK - lSsh = subprocess.Popen(["ssh", "%s" % myHost, commandline],shell=False,stdout=subprocess.PIPE,stderr=subprocess.PIPE) + lSsh = subprocess.Popen(["ssh", "%s" % myHost, noHistoryCmd],shell=False,stdout=subprocess.PIPE,stderr=subprocess.PIPE) self.cmd2Results = str(lSsh.stdout.readlines()) def command3(self, commandline, timeout, silent=False): if not silent: logging.debug(commandline) self.cmd2Results = '' + noHistoryCmd = 'unset HISTFILE; ' + commandline myHost = self.username + '@' + self.ipaddress # CAUTION: THIS METHOD IMPLIES THAT THERE ARE VALID SSH KEYS # BETWEEN THE PYTHON EXECUTOR NODE AND THE REMOTE HOST # OTHERWISE IT WON'T WORK - lSsh = subprocess.Popen(["ssh", "%s" % myHost, commandline],shell=False,stdout=subprocess.PIPE,stderr=subprocess.PIPE) + lSsh = subprocess.Popen(["ssh", "%s" % myHost, noHistoryCmd],shell=False,stdout=subprocess.PIPE,stderr=subprocess.PIPE) return lSsh.stdout.readlines() diff --git a/ci-scripts/stats_monitor.py b/ci-scripts/stats_monitor.py index 933bf13203..e732325fa1 100755 --- a/ci-scripts/stats_monitor.py +++ b/ci-scripts/stats_monitor.py @@ -61,9 +61,16 @@ class StatMonitor(): def collect(self,node_type): if node_type=='enb': - cmd='cat L1_stats.log MAC_stats.log PDCP_stats.log RRC_stats.log' + files = ["L1_stats.log", "MAC_stats.log", "PDCP_stats.log", "RRC_stats.log"] else: #'gnb' - cmd='cat nrL1_stats.log nrMAC_stats.log nrPDCP_stats.log nrRRC_stats.log' + files = ["nrL1_stats.log", "nrMAC_stats.log", "nrPDCP_stats.log", "nrRRC_stats.log"] + # append each file's contents to another file (prepended with CI-) for + # post-mortem/debugging analysis + for f in files: + cmd = rf'cat {f} >> CI-{f}' + subprocess.Popen(shlex.split(cmd)) + # join the files for further processing + cmd = rf'cat {shlex.join(files)}' process=subprocess.Popen(shlex.split(cmd), stdout=subprocess.PIPE) output = process.stdout.readlines() if node_type=='enb': diff --git a/ci-scripts/stats_monitor.py.old b/ci-scripts/stats_monitor.py.old deleted file mode 100755 index ae9b39bfa6..0000000000 --- a/ci-scripts/stats_monitor.py.old +++ /dev/null @@ -1,94 +0,0 @@ -import subprocess -import time -import shlex -import re -import sys -import matplotlib.pyplot as plt -import pickle -import numpy as np -import os - -def collect(d, node_type): - if node_type=='enb': - cmd='cat L1_stats.log MAC_stats.log PDCP_stats.log RRC_stats.log' - else: #'gnb' - cmd='cat nrL1_stats.log nrMAC_stats.log nrPDCP_stats.log nrRRC_stats.log' - process=subprocess.Popen(shlex.split(cmd), stdout=subprocess.PIPE) - output = process.stdout.readlines() - for l in output: - tmp=l.decode("utf-8") - result=re.match(rf'^.*\bPHR\b ([0-9]+).+\bbler\b ([0-9]+\.[0-9]+).+\bmcsoff\b ([0-9]+).+\bmcs\b ([0-9]+)',tmp) - if result is not None: - d['PHR'].append(int(result.group(1))) - d['bler'].append(float(result.group(2))) - d['mcsoff'].append(int(result.group(3))) - d['mcs'].append(int(result.group(4))) - - -def graph(d, node_type): - - - figure, axis = plt.subplots(4, 1,figsize=(10, 10)) - - major_ticks = np.arange(0, len(d['PHR'])+1, 1) - axis[0].set_xticks(major_ticks) - axis[0].set_xticklabels([]) - axis[0].plot(d['PHR'],marker='o') - axis[0].set_xlabel('time') - axis[0].set_ylabel('PHR') - axis[0].set_title("PHR") - - major_ticks = np.arange(0, len(d['bler'])+1, 1) - axis[1].set_xticks(major_ticks) - axis[1].set_xticklabels([]) - axis[1].plot(d['bler'],marker='o') - axis[1].set_xlabel('time') - axis[1].set_ylabel('bler') - axis[1].set_title("bler") - - major_ticks = np.arange(0, len(d['mcsoff'])+1, 1) - axis[2].set_xticks(major_ticks) - axis[2].set_xticklabels([]) - axis[2].plot(d['mcsoff'],marker='o') - axis[2].set_xlabel('time') - axis[2].set_ylabel('mcsoff') - axis[2].set_title("mcsoff") - - major_ticks = np.arange(0, len(d['mcs'])+1, 1) - axis[3].set_xticks(major_ticks) - axis[3].set_xticklabels([]) - axis[3].plot(d['mcs'],marker='o') - axis[3].set_xlabel('time') - axis[3].set_ylabel('mcs') - axis[3].set_title("mcs") - - plt.tight_layout() - # Combine all the operations and display - plt.savefig(node_type+'_stats_monitor.png') - plt.show() - -if __name__ == "__main__": - - node_type = sys.argv[1]#enb or gnb - - d={} - d['PHR']=[] - d['bler']=[] - d['mcsoff']=[] - d['mcs']=[] - - - cmd='ps aux | grep modem | grep -v grep' - process=subprocess.Popen(cmd, shell=True, stdout=subprocess.PIPE) - output = process.stdout.readlines() - while len(output)!=0 : - collect(d, node_type) - process=subprocess.Popen(cmd, shell=True, stdout=subprocess.PIPE) - output = process.stdout.readlines() - time.sleep(1) - print('process stopped') - with open(node_type+'_stats_monitor.pickle', 'wb') as handle: - pickle.dump(d, handle, protocol=pickle.HIGHEST_PROTOCOL) - graph(d, node_type) - - diff --git a/ci-scripts/stats_monitor_dev.py b/ci-scripts/stats_monitor_dev.py deleted file mode 100755 index 83de20f5d2..0000000000 --- a/ci-scripts/stats_monitor_dev.py +++ /dev/null @@ -1,101 +0,0 @@ -""" -To create graphs and pickle from runtime statistics in L1,MAC,RRC,PDCP files -""" - -import subprocess -import time -import shlex -import re -import sys -import pickle -import matplotlib.pyplot as plt -import numpy as np -import yaml - - -class StatMonitor(): - def __init__(self,): - with open('stats_monitor_conf.yaml','r') as file: - self.d = yaml.load(file) - for node in self.d: - for metric in self.d[node]: - self.d[node][metric]=[] - - - def process_gnb (self,node_type,output): - for line in output: - tmp=line.decode("utf-8") - result=re.match(r'^.*\bdlsch_rounds\b ([0-9]+)\/([0-9]+).*\bdlsch_errors\b ([0-9]+)',tmp) - if result is not None: - self.d[node_type]['dlsch_err'].append(int(result.group(3))) - percentage=float(result.group(2))/float(result.group(1)) - self.d[node_type]['dlsch_err_perc_round_1'].append(percentage) - result=re.match(r'^.*\bulsch_rounds\b ([0-9]+)\/([0-9]+).*\bulsch_errors\b ([0-9]+)',tmp) - if result is not None: - self.d[node_type]['ulsch_err'].append(int(result.group(3))) - percentage=float(result.group(2))/float(result.group(1)) - self.d[node_type]['ulsch_err_perc_round_1'].append(percentage) - - - def process_enb (self,node_type,output): - for line in output: - tmp=line.decode("utf-8") - result=re.match(r'^.*\bPHR\b ([0-9]+).+\bbler\b ([0-9]+\.[0-9]+).+\bmcsoff\b ([0-9]+).+\bmcs\b ([0-9]+)',tmp) - if result is not None: - self.d[node_type]['PHR'].append(int(result.group(1))) - self.d[node_type]['bler'].append(float(result.group(2))) - self.d[node_type]['mcsoff'].append(int(result.group(3))) - self.d[node_type]['mcs'].append(int(result.group(4))) - - - def collect(self,node_type): - if node_type=='enb': - cmd='cat L1_stats.log MAC_stats.log PDCP_stats.log RRC_stats.log' - else: #'gnb' - cmd='cat nrL1_stats.log nrMAC_stats.log nrPDCP_stats.log nrRRC_stats.log' - process=subprocess.Popen(shlex.split(cmd), stdout=subprocess.PIPE) - output = process.stdout.readlines() - if node_type=='enb': - self.process_enb(node_type,output) - else: #'gnb' - self.process_gnb(node_type,output) - - - def graph(self,node_type): - col = 1 - figure, axis = plt.subplots(len(self.d[node_type]), col ,figsize=(10, 10)) - i=0 - for metric in self.d[node_type]: - major_ticks = np.arange(0, len(self.d[node_type][metric])+1, 1) - axis[i].set_xticks(major_ticks) - axis[i].set_xticklabels([]) - axis[i].plot(self.d[node_type][metric],marker='o') - axis[i].set_xlabel('time') - axis[i].set_ylabel(metric) - axis[i].set_title(metric) - i+=1 - - plt.tight_layout() - # Combine all the operations and display - plt.savefig(node_type+'_stats_monitor.png') - plt.show() - - -if __name__ == "__main__": - - node = sys.argv[1]#enb or gnb - mon=StatMonitor() - - #collecting stats when modem process is stopped - CMD='ps aux | grep mode | grep -v grep' - process=subprocess.Popen(CMD, shell=True, stdout=subprocess.PIPE) - output = process.stdout.readlines() - while len(output)!=0 : - mon.collect(node) - process=subprocess.Popen(CMD, shell=True, stdout=subprocess.PIPE) - output = process.stdout.readlines() - time.sleep(1) - print('Process stopped') - with open(node+'_stats_monitor.pickle', 'wb') as handle: - pickle.dump(mon.d, handle, protocol=pickle.HIGHEST_PROTOCOL) - mon.graph(node) diff --git a/ci-scripts/xml_files/container_5g_rfsim.xml b/ci-scripts/xml_files/container_5g_rfsim.xml index d930886d0b..d1114616a8 100644 --- a/ci-scripts/xml_files/container_5g_rfsim.xml +++ b/ci-scripts/xml_files/container_5g_rfsim.xml @@ -93,7 +93,7 @@ rfsim5g-oai-nr-ue rfsim5g-oai-ext-dn -B 12.1.1.2 -u -i 1 -s - -c 12.1.1.2 -u -i 1 -t 30 -b 400K + -c 12.1.1.2 -u -i 1 -t 30 -b 3M @@ -102,7 +102,7 @@ rfsim5g-oai-ext-dn rfsim5g-oai-nr-ue -u -i 1 -s - -B 12.1.1.2 -c 192.168.72.135 -u -i 1 -t 30 -b 20K + -B 12.1.1.2 -c 192.168.72.135 -u -i 1 -t 30 -b 1M diff --git a/ci-scripts/xml_files/container_nsa_b200_quectel.xml b/ci-scripts/xml_files/container_nsa_b200_quectel.xml index 3cac13dad4..55f8b8638d 100644 --- a/ci-scripts/xml_files/container_nsa_b200_quectel.xml +++ b/ci-scripts/xml_files/container_nsa_b200_quectel.xml @@ -37,8 +37,8 @@ 000001 050000 050001 - 070000 070001 + 070000 050000 050001 010002 @@ -123,15 +123,15 @@ -u -b 40M -t 60 DL idefix - 3 - 95 + 20 + 85 single-ue Iperf - iperf (UL/2Mbps/UDP)(60 sec)(single-ue profile) - -u -b 2M -t 60 + iperf (UL/3Mbps/UDP)(60 sec)(single-ue profile) + -u -b 3M -t 60 UL idefix 1 diff --git a/ci-scripts/xml_files/fr1_nsa_2x2_quectel.xml b/ci-scripts/xml_files/fr1_nsa_2x2_quectel.xml index 045466a8ad..5c53bf5eed 100644 --- a/ci-scripts/xml_files/fr1_nsa_2x2_quectel.xml +++ b/ci-scripts/xml_files/fr1_nsa_2x2_quectel.xml @@ -79,6 +79,7 @@ 1 nr yes + datalog_rt_stats.2x2.yaml 192.168.18.240 diff --git a/ci-scripts/xml_files/fr1_nsa_2x2_quectel_attach_detach.xml b/ci-scripts/xml_files/fr1_nsa_2x2_quectel_attach_detach.xml index 6fe23e022b..02544f273b 100644 --- a/ci-scripts/xml_files/fr1_nsa_2x2_quectel_attach_detach.xml +++ b/ci-scripts/xml_files/fr1_nsa_2x2_quectel_attach_detach.xml @@ -99,6 +99,7 @@ 1 nr yes + datalog_rt_stats.2x2.yaml 192.168.18.240 diff --git a/ci-scripts/xml_files/fr1_nsa_quectel.xml b/ci-scripts/xml_files/fr1_nsa_quectel.xml index 5e5853ab7f..55f6f4376e 100644 --- a/ci-scripts/xml_files/fr1_nsa_quectel.xml +++ b/ci-scripts/xml_files/fr1_nsa_quectel.xml @@ -34,9 +34,8 @@ 050000 050001 000001 - 070000 - 000001 - 070001 + 070003 + 070002 000001 050000 050001 @@ -114,16 +113,38 @@ Iperf - iperf (DL/60Mbps/UDP)(60 sec)(single-ue profile) - -u -b 60M -t 60 + iperf (DL/30Mbps/UDP)(30 sec)(single-ue profile) + -u -b 30M -t 30 DL idefix - 3 + 5 95 single-ue + Iperf + iperf (DL/40Mbps/UDP)(30 sec)(single-ue profile) + -u -b 40M -t 30 + DL + idefix + 5 + 95 + single-ue + + + + Iperf + iperf (DL/60Mbps/UDP)(60 sec)(single-ue profile) + -u -b 60M -t 60 + DL + idefix + 5 + 95 + single-ue + + + Iperf iperf (UL/3Mbps/UDP)(60 sec)(single-ue profile) -u -b 3M -t 60 diff --git a/ci-scripts/xml_files/fr1_sa_oaiue_x300.xml b/ci-scripts/xml_files/fr1_sa_oaiue_x300.xml index 509fef9e8a..c43bdd2a7c 100644 --- a/ci-scripts/xml_files/fr1_sa_oaiue_x300.xml +++ b/ci-scripts/xml_files/fr1_sa_oaiue_x300.xml @@ -26,19 +26,19 @@ tasks 1 - 040000 + 041000 000002 - 010000 + 011000 000002 - 050000 - 050001 + 051000 + 051001 000001 010002 080000 - + Initialize_OAI_UE Initialize OAI UE (X300) nr @@ -51,7 +51,7 @@ - + Initialize_eNB Initialize gNB -O ci-scripts/conf_files/gnb.band78.sa.fr1.106PRB.usrpn310.conf --sa --usrp-tx-thread-config 1 --log_config.global_log_options level,nocolor,time @@ -76,14 +76,14 @@ - + Ping Ping from CN to UE: 20pings in 20sec -c 20 5 - + Ping Ping from CN to UE: 100pings in 20sec -c 100 -i 0.2 diff --git a/ci-scripts/xml_files/fr1_sa_quectel.xml b/ci-scripts/xml_files/fr1_sa_quectel.xml index 72b4c0a273..28c6b2e9e0 100644 --- a/ci-scripts/xml_files/fr1_sa_quectel.xml +++ b/ci-scripts/xml_files/fr1_sa_quectel.xml @@ -64,6 +64,7 @@ nr yes yes + datalog_rt_stats.2x2.yaml 192.168.18.240 diff --git a/ci-scripts/xml_files/fr1_sa_quectel_162prb.xml b/ci-scripts/xml_files/fr1_sa_quectel_162prb.xml index f465b320b6..696ec790ff 100644 --- a/ci-scripts/xml_files/fr1_sa_quectel_162prb.xml +++ b/ci-scripts/xml_files/fr1_sa_quectel_162prb.xml @@ -64,6 +64,7 @@ nr yes yes + datalog_rt_stats.2x2.yaml 192.168.18.240 diff --git a/ci-scripts/xml_files/fr1_sa_quectel_stages.xml b/ci-scripts/xml_files/fr1_sa_quectel_stages.xml index dabe53f233..edc4440612 100644 --- a/ci-scripts/xml_files/fr1_sa_quectel_stages.xml +++ b/ci-scripts/xml_files/fr1_sa_quectel_stages.xml @@ -71,6 +71,7 @@ nr yes yes + datalog_rt_stats.2x2.yaml 192.168.18.240 diff --git a/ci-scripts/xml_files/fr1_sa_quectel_stages_162prb.xml b/ci-scripts/xml_files/fr1_sa_quectel_stages_162prb.xml index c28791e555..5feed75586 100644 --- a/ci-scripts/xml_files/fr1_sa_quectel_stages_162prb.xml +++ b/ci-scripts/xml_files/fr1_sa_quectel_stages_162prb.xml @@ -73,6 +73,7 @@ nr yes yes + datalog_rt_stats.2x2.yaml 192.168.18.240 diff --git a/ci-scripts/xml_files/fr1_lte_2x2_quectel.xml b/ci-scripts/xml_files/lte_2x2_tm1_quectel.xml similarity index 97% rename from ci-scripts/xml_files/fr1_lte_2x2_quectel.xml rename to ci-scripts/xml_files/lte_2x2_tm1_quectel.xml index 57a66ece76..6cb7b2883b 100644 --- a/ci-scripts/xml_files/fr1_lte_2x2_quectel.xml +++ b/ci-scripts/xml_files/lte_2x2_tm1_quectel.xml @@ -21,8 +21,8 @@ --> - TEST-LTE-TM2 - LTE 2x2 Ping DL UL with QUECTEL + TEST-LTE-TM1-Tab1 + LTE 2x2 TM1 Ping DL UL with QUECTEL tasks 1 diff --git a/ci-scripts/xml_files/lte_2x2_tm2_quectel.xml b/ci-scripts/xml_files/lte_2x2_tm2_quectel.xml new file mode 100644 index 0000000000..fcc772b8f4 --- /dev/null +++ b/ci-scripts/xml_files/lte_2x2_tm2_quectel.xml @@ -0,0 +1,145 @@ + + + TEST-LTE-TM2-Tab2 + LTE 2x2 TM2 Ping DL UL with QUECTEL + tasks + 1 + + 030001 + 000002 + 010000 + 000001 + 050002 + 050003 + 000002 + 070002 + 070003 + 000001 + 010002 + 080000 + + + + + Initialize_UE + Initialize Quectel + nrmodule2_quectel + yes + + + + + Terminate_UE + Terminate Quectel + nrmodule2_quectel + + + + + Initialize_eNB + Initialize eNB + -O ci-scripts/conf_files/enb.band38.lte_2x2_tm2.100PRB.usrpn310.conf --usrp-tx-thread-config 1 --thread-pool 0,2,4,6 --log_config.global_log_options level,nocolor,time + 0 + 0 + lte + yes + yes + 192.168.18.241 + + + + + IdleSleep + Sleep + 5 + + + + IdleSleep + Sleep + 20 + + + + + Ping + Ping: 20 pings + nrmodule2_quectel + -c 20 + 1 + 40 + + + Ping + Ping: 100 pings, size 1024 + nrmodule2_quectel + -c 100 -s 1024 -i 0,2 + 1 + 30 + + + + + Iperf + iperf (DL/26Mbps/UDP)(60 sec)(single-ue profile) + -u -b 26M -t 60 + DL + nrmodule2_quectel + 5 + 95 + single-ue + + + + Iperf + iperf (UL/7Mbps/UDP)(60 sec)(single-ue profile) + -u -b 7M -t 60 + UL + nrmodule2_quectel + 5 + 95 + single-ue + + + + + + + Terminate_eNB + Terminate eNB + 0 + 0 + lte + + + + Terminate_eNB + Terminate gNB + 1 + 1 + nr + + + + diff --git a/cmake_targets/build_oai b/cmake_targets/build_oai index 2dc03967f6..68aef48c6b 100755 --- a/cmake_targets/build_oai +++ b/cmake_targets/build_oai @@ -99,25 +99,23 @@ Options Makes the LTE softmodem --eNBocp Makes the OCP LTE softmodem --gNB +--gNB Makes the NR softmodem ---nrUE - Makes the NR UE softmodem --RU Makes the OAI RRU --UE Makes the UE specific parts (ue_ip, usim, nvram) from the given configuration file +--nrUE + Makes the NR UE softmodem --UE-conf-nvram [configuration file] Specify conf_nvram_path (default \"$conf_nvram_path\") --UE-gen-nvram [output path] Specify gen_nvram_path (default \"$gen_nvram_path\") ---HWLAT - Makes test program for haw latency tests --a | --agent - Enables agent for software-defined control of the eNB -w | --hardware EXMIMO, USRP, BLADERF, LMSSDR, IRIS, ADRV9371_ZC706, SIMU, AW2SORI, None (Default) Adds this RF board support (in external packages installation and in compilation) +-t | --transport + Selects the transport protocol type, options: None, Ethernet, benetel4g, benetel5g -P | --phy_simulators Makes the unitary tests Layer 1 simulators -S | --core_simulators @@ -128,6 +126,14 @@ Options runs only specified test cases specified here. This flag is only valid with -s -V | --vcd Adds a debgging facility to the binary files: GUI with major internal synchronization events +-x | --xforms + Will compile with software oscilloscope features +--HWLAT + Makes test program for haw latency tests +--HWLAT_TEST + Compiles a hw latency test program +--verbose-ci + Compile with verbose instructions in CI Docker env --verbose-compile Shows detailed compilation instructions in makefile --cflags_processor @@ -163,6 +169,10 @@ Options Build for I/Q record-playback modes -k | --skip-shared-libraries Skip build for shared libraries to reduce compilation time when building frequently for debugging purposes +--ninja + Tell cmake to use the Ninja build system. Without, will generate make files +--sanitize-address | -fsanitize=address + Enable the address sanitizer on all targets --ittiSIM Makes the itti simulator -h | --help diff --git a/cmake_targets/install_external_packages.ubuntu20 b/cmake_targets/install_external_packages.ubuntu20 index 0023c8d3c8..33e558a234 100755 --- a/cmake_targets/install_external_packages.ubuntu20 +++ b/cmake_targets/install_external_packages.ubuntu20 @@ -24,6 +24,7 @@ # authors Laurent Thomas # ####################################### + if [ ! -f /etc/os-release ]; then echo "No /etc/os-release file found. You're likely on an unsupported distro." exit 1 @@ -472,7 +473,7 @@ if ! check_supported_distribution; then echo_error "Your distribution $(get_distribution_release) is not supported by oai !" exit 1 fi - +set_openair_env echo_info "Installing packages" check_install_ubuntu_packages diff --git a/cmake_targets/tools/build_helper b/cmake_targets/tools/build_helper index a23d4eca9d..1df7808b0f 100755 --- a/cmake_targets/tools/build_helper +++ b/cmake_targets/tools/build_helper @@ -756,6 +756,7 @@ check_install_oai_software() { libidn11-dev \ libmysqlclient-dev \ libpython2.7-dev \ + libreadline-dev \ libsctp1 \ libsctp-dev \ libssl-dev \ @@ -842,6 +843,7 @@ check_install_oai_software() { patch \ psmisc \ python \ + readline-devel \ subversion \ xmlstarlet \ python-pip \ diff --git a/common/config/config_load_configmodule.c b/common/config/config_load_configmodule.c index d336c1f229..773692a82a 100644 --- a/common/config/config_load_configmodule.c +++ b/common/config/config_load_configmodule.c @@ -254,7 +254,7 @@ configmodule_interface_t *load_configmodule(int argc, cfgptr = calloc(sizeof(configmodule_interface_t),1); /* argv_info is used to memorize command line options which have been recognized */ /* and to detect unrecognized command line options which might have been specified */ - cfgptr->argv_info = calloc(sizeof(int32_t), argc); + cfgptr->argv_info = calloc(sizeof(int32_t), argc+10); /* argv[0] is the exec name, always Ok */ cfgptr->argv_info[0] |= CONFIG_CMDLINEOPT_PROCESSED; diff --git a/doc/RUNMODEM.md b/doc/RUNMODEM.md index d063afd5d9..89d2ec8a2d 100644 --- a/doc/RUNMODEM.md +++ b/doc/RUNMODEM.md @@ -89,6 +89,8 @@ At the UE the --phy-test flag will ```bash sudo ./nr-softmodem -O ../../../targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.tm1.106PRB.usrpn300.conf --phy-test``` +In phy-test mode it is possible to mimic the reception of UE Capabilities at gNB by passing through the command line parameter `--uecap_file` the location and file name of the input UE Capability file, e.g. `--uecap_file ../../../targets/PROJECTS/GENERIC-NR-5GC/CONF/uecap.xml` + ### Launch UE in another window ```bash sudo ./nr-uesoftmodem --phy-test [--rrc_config_path ../../../ci-scripts/rrc-files]``` @@ -122,6 +124,8 @@ gNB on machine 1: `sudo ./nr-softmodem -O ../../../targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.tm1.106PRB.usrpn300.conf --do-ra` +In do-ra mode it is possible to mimic the reception of UE Capabilities at gNB by passing through the command line parameter `--uecap_file` the location and file name of the input UE Capability file, e.g. `--uecap_file ../../../targets/PROJECTS/GENERIC-NR-5GC/CONF/uecap.xml` + UE on machine 2: `sudo ./nr-uesoftmodem --do-ra` @@ -161,13 +165,17 @@ gNB on machine 1: UE on machine 2: -`sudo ./nr-uesoftmodem -r 106 --numerology 1 --band 78 -C 3619200000 --sa` +`sudo ./nr-uesoftmodem -r 106 --numerology 1 --band 78 -C 3619200000 -s 516 --sa` With the RF simulator (on the same machine): `sudo ./nr-softmodem -O ../../../targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.106PRB.usrpb210.conf --rfsim --sa` -`sudo ./nr-uesoftmodem -r 106 --numerology 1 --band 78 -C 3619200000 --rfsim --sa` +`sudo ./nr-uesoftmodem -r 106 --numerology 1 --band 78 -C 3619200000 -s 516 --rfsim --sa` + +where `-r` sets the transmission bandwidth configuration in terms of RBs, `-C` sets the downlink carrier frequency and `-s` sets the SSB start subcarrier. + +Additionally, at UE side `--uecap_file` option can be used to pass the UE Capabilities input file (path location + filename), e.g. `--uecap_file ../../../targets/PROJECTS/GENERIC-NR-5GC/CONF/uecap.xml` ## IF setup with OAI diff --git a/doc/SW-archi-graph.md b/doc/SW-archi-graph.md new file mode 100644 index 0000000000..8f8a6f6e5c --- /dev/null +++ b/doc/SW-archi-graph.md @@ -0,0 +1,75 @@ +```mermaid +flowchart TB + A[ru_thread] --> RFin>block rx_rf] --> feprx + feprx --> half-slot --> end_feprx + feprx --> second-thread -- block_end_feprx --> end_feprx>feprx] + end_feprx --> rx_nr_prach_ru +rx_nr_prach_ru -- block_queue_singleton --> resp_L1>resp L1] +resp_L1 -- async launch --> rx_func +resp_L1 -- immediate return --> RFin + +subgraph rxfunc +rx_func_implem[rx_func] + subgraph rxfuncbeg + handle_nr_slot_ind + --> rnti_to_remove-mgmt + --> L1_nr_prach_procedures + --> apply_nr_rotation_ul + end + subgraph phy_procedures_gNB_uespec_RX + fill_ul_rb_mask + --> pucch(decode each gNB->pucch) + -->nr_fill_ul_indication + --> nr_ulsch_procedures + --> nr_ulsch_decoding + --> segInParallel[[all segments decode in parallel]] + --> barrier_end_of_ulsch_decoding + end + subgraph NR_UL_indication + handle_nr_rach + --> handle_nr_uci + --> handle_nr_ulsch + subgraph gNB_dlsch_ulsch_scheduler + run_pdcp + --> nr_rrc_trigger + --> schedule_xxxx + end + handle_nr_ulsch --> gNB_dlsch_ulsch_scheduler + subgraph NR_Schedule_response + L1_tx_free3>L1_tx_free] + --> handle_nr_nfapi_xxx_pdu + --> sendTxFilled((L1_tx_filled)) + --> nr_fill_ul_xxx + --> nr_fill_prach + end + gNB_dlsch_ulsch_scheduler --> NR_Schedule_response + end + rx_func_implem --> rxfuncbeg + rxfuncbeg --> phy_procedures_gNB_uespec_RX +phy_procedures_gNB_uespec_RX --> NR_UL_indication +-- block_queue_block_PNF_monolithic --> L1_tx_free2>L1 tx filled] +-- async launch --> tx_func +L1_tx_free2 -- send_msg --> rsp((resp_L1)) +end +rx_func --> rxfunc + + +subgraph tx_func + direction LR + subgraph phy_procedures_gNB_TX + dcitop[nr_generate dci top] + --> nr_generate_csi_rs + --> apply_nr_rotation + -- send_msg --> end_tx_func((L1_tx_out)) + end + subgraph tx_reorder_thread + L1_tx_out>L1_tx_out] + --> reorder{re order} --> reorder + reorder --> ru_tx_func + reorder --> L1_tx_free((L1_tx_free)) + ru_tx_func --> feptx_prec + --> feptx_ofdm + end +end + +``` diff --git a/doc/SW_archi.md b/doc/SW_archi.md index 0593863102..0e77cfa580 100644 --- a/doc/SW_archi.md +++ b/doc/SW_archi.md @@ -17,6 +17,70 @@ body { +```mermaid +flowchart TB + A[ru_thread] --> RFin>block rx_rf] --> feprx + feprx --> half-slot --> end_feprx + feprx --> second-thread -- block_end_feprx --> end_feprx>feprx] + end_feprx --> rx_nr_prach_ru +rx_nr_prach_ru -- block_queue --> resp_L1>resp L1] +resp_L1 -- async launch --> rx_func +resp_L1 -- immediate return --> RFin + +subgraph rxfunc +rx_func_implem[rx_func] + subgraph rxfuncbeg + handle_nr_slot_ind + --> rnti_to_remove-mgmt + --> L1_nr_prach_procedures + --> apply_nr_rotation_ul + end + subgraph phy_procedures_gNB_uespec_RX + fill_ul_rb_mask + --> pucch(decode each gNB->pucch) + -->nr_fill_ul_indication + --> nr_ulsch_procedures + --> nr_ulsch_decoding + --> segInParallel[[all segments decode in parallel]] + --> barrier_end_of_ulsch_decoding + end + subgraph NR_UL_indication + handle_nr_rach + --> handle_nr_uci + --> handle_nr_ulsch + --> gNB_dlsch_ulsch_scheduler + --> NR_Schedule_response + end + rx_func_implem --> rxfuncbeg + rxfuncbeg --> phy_procedures_gNB_uespec_RX +phy_procedures_gNB_uespec_RX --> NR_UL_indication +-- block_queue --> L1_tx_free2>L1 tx free] +-- async launch --> tx_func +L1_tx_free2 -- send_msg --> rsp((resp_L1)) +end +rx_func --> rxfunc + + +subgraph tx + direction LR + subgraph tx_func2 + phy_procedures_gNB_TX + --> dcitop[nr_generate dci top] + --> nr_generate_csi_rs + --> apply_nr_rotation + -- send_msg --> end_tx_func((L1_tx_out)) + end + subgraph tx_reorder_thread + L1_tx_out>L1_tx_out] + --> reorder{re order} --> reorder + reorder --> ru_tx_func + reorder --> L1_tx_free((L1_tx_free)) + ru_tx_func --> feptx_prec + --> feptx_ofdm + end + tx_func2 --> tx_reorder_thread +end +``` This tuto for 5G gNB design, with Open Cells main {: .text-center} diff --git a/docker/Dockerfile.build.rhel8.2 b/docker/Dockerfile.build.rhel8.2 index 7ddfcdc034..22486c5e68 100644 --- a/docker/Dockerfile.build.rhel8.2 +++ b/docker/Dockerfile.build.rhel8.2 @@ -35,4 +35,4 @@ COPY . . RUN /bin/sh oaienv && \ cd cmake_targets && \ mkdir -p log && \ - ./build_oai --eNB --gNB --RU --UE --nrUE --ninja -w USRP --verbose-ci + ./build_oai --eNB --gNB --RU --UE --nrUE --ninja --build-lib all -w USRP --verbose-ci diff --git a/docker/Dockerfile.build.ubuntu18 b/docker/Dockerfile.build.ubuntu18 index b479ee90d9..3ba1e41442 100644 --- a/docker/Dockerfile.build.ubuntu18 +++ b/docker/Dockerfile.build.ubuntu18 @@ -35,4 +35,4 @@ COPY . . RUN /bin/sh oaienv && \ cd cmake_targets && \ mkdir -p log && \ - ./build_oai --eNB --gNB --RU --UE --nrUE --ninja -w USRP --verbose-ci + ./build_oai --eNB --gNB --RU --UE --nrUE --ninja --build-lib all -w USRP --verbose-ci diff --git a/docker/Dockerfile.eNB.rhel8.2 b/docker/Dockerfile.eNB.rhel8.2 index bb0a9cb064..6c921a4932 100644 --- a/docker/Dockerfile.eNB.rhel8.2 +++ b/docker/Dockerfile.eNB.rhel8.2 @@ -69,6 +69,8 @@ COPY --from=enb-build \ /oai-ran/cmake_targets/ran_build/build/libparams_libconfig.so \ /oai-ran/cmake_targets/ran_build/build/libdfts.so \ /oai-ran/cmake_targets/ran_build/build/liboai_iqplayer.so \ + /oai-ran/cmake_targets/ran_build/build/libtelnetsrv.so \ + /oai-ran/cmake_targets/ran_build/build/libtelnetsrv_enb.so \ /usr/local/lib/ COPY --from=enb-base \ diff --git a/docker/Dockerfile.eNB.ubuntu18 b/docker/Dockerfile.eNB.ubuntu18 index 23cea729ca..1f375a20dc 100644 --- a/docker/Dockerfile.eNB.ubuntu18 +++ b/docker/Dockerfile.eNB.ubuntu18 @@ -76,6 +76,8 @@ COPY --from=enb-build \ /oai-ran/cmake_targets/ran_build/build/libparams_libconfig.so \ /oai-ran/cmake_targets/ran_build/build/libdfts.so \ /oai-ran/cmake_targets/ran_build/build/liboai_iqplayer.so \ + /oai-ran/cmake_targets/ran_build/build/libtelnetsrv.so \ + /oai-ran/cmake_targets/ran_build/build/libtelnetsrv_enb.so \ /usr/local/lib/ # Now we are copying from builder-image the UHD files. diff --git a/docker/Dockerfile.gNB.rhel8.2 b/docker/Dockerfile.gNB.rhel8.2 index 832fa17153..703f4c67b5 100644 --- a/docker/Dockerfile.gNB.rhel8.2 +++ b/docker/Dockerfile.gNB.rhel8.2 @@ -74,6 +74,7 @@ COPY --from=gnb-build \ /oai-ran/cmake_targets/ran_build/build/libldpc_optim.so \ /oai-ran/cmake_targets/ran_build/build/libldpc_optim8seg.so \ /oai-ran/cmake_targets/ran_build/build/libldpc_orig.so \ + /oai-ran/cmake_targets/ran_build/build/libtelnetsrv.so \ /usr/local/lib/ COPY --from=gnb-base \ diff --git a/docker/Dockerfile.gNB.ubuntu18 b/docker/Dockerfile.gNB.ubuntu18 index 66c5d7703f..24e4bcbc7c 100644 --- a/docker/Dockerfile.gNB.ubuntu18 +++ b/docker/Dockerfile.gNB.ubuntu18 @@ -78,6 +78,7 @@ COPY --from=gnb-build \ /oai-ran/cmake_targets/ran_build/build/libldpc_optim.so \ /oai-ran/cmake_targets/ran_build/build/libldpc_optim8seg.so \ /oai-ran/cmake_targets/ran_build/build/libldpc_orig.so \ + /oai-ran/cmake_targets/ran_build/build/libtelnetsrv.so \ /usr/local/lib/ # Now we are copying from builder-image the UHD files. diff --git a/docker/Dockerfile.lteUE.rhel8.2 b/docker/Dockerfile.lteUE.rhel8.2 index 2580b95278..f547558bdb 100644 --- a/docker/Dockerfile.lteUE.rhel8.2 +++ b/docker/Dockerfile.lteUE.rhel8.2 @@ -73,6 +73,7 @@ COPY --from=lte-ue-build \ /oai-ran/cmake_targets/ran_build/build/libparams_libconfig.so \ /oai-ran/cmake_targets/ran_build/build/libSIMU.so \ /oai-ran/cmake_targets/ran_build/build/libdfts.so \ + /oai-ran/cmake_targets/ran_build/build/libtelnetsrv.so \ /usr/local/lib/ COPY --from=lte-ue-base \ diff --git a/docker/Dockerfile.lteUE.ubuntu18 b/docker/Dockerfile.lteUE.ubuntu18 index 70394d8a4b..a5bf4cfe94 100644 --- a/docker/Dockerfile.lteUE.ubuntu18 +++ b/docker/Dockerfile.lteUE.ubuntu18 @@ -80,6 +80,7 @@ COPY --from=lte-ue-build \ /oai-ran/cmake_targets/ran_build/build/libparams_libconfig.so \ /oai-ran/cmake_targets/ran_build/build/libSIMU.so \ /oai-ran/cmake_targets/ran_build/build/libdfts.so \ + /oai-ran/cmake_targets/ran_build/build/libtelnetsrv.so \ /usr/local/lib/ # Now we are copying from builder-image the UHD files. diff --git a/docker/Dockerfile.nrUE.rhel8.2 b/docker/Dockerfile.nrUE.rhel8.2 index f774638f47..cbc8d8c65f 100644 --- a/docker/Dockerfile.nrUE.rhel8.2 +++ b/docker/Dockerfile.nrUE.rhel8.2 @@ -76,6 +76,8 @@ COPY --from=nr-ue-build \ /oai-ran/cmake_targets/ran_build/build/libldpc_optim.so \ /oai-ran/cmake_targets/ran_build/build/libldpc_optim8seg.so \ /oai-ran/cmake_targets/ran_build/build/libldpc_orig.so \ + /oai-ran/cmake_targets/ran_build/build/libtelnetsrv.so \ + /oai-ran/cmake_targets/ran_build/build/libtelnetsrv_5Gue.so \ /usr/local/lib/ COPY --from=nr-ue-base \ diff --git a/docker/Dockerfile.nrUE.ubuntu18 b/docker/Dockerfile.nrUE.ubuntu18 index 021e8d39cf..126f268e00 100644 --- a/docker/Dockerfile.nrUE.ubuntu18 +++ b/docker/Dockerfile.nrUE.ubuntu18 @@ -81,6 +81,8 @@ COPY --from=nr-ue-build \ /oai-ran/cmake_targets/ran_build/build/libldpc_optim.so \ /oai-ran/cmake_targets/ran_build/build/libldpc_optim8seg.so \ /oai-ran/cmake_targets/ran_build/build/libldpc_orig.so \ + /oai-ran/cmake_targets/ran_build/build/libtelnetsrv.so \ + /oai-ran/cmake_targets/ran_build/build/libtelnetsrv_5Gue.so \ /usr/local/lib/ # Now we are copying from builder-image the UHD files. diff --git a/executables/nr-gnb.c b/executables/nr-gnb.c index 4fe8cfa1bf..9551a71921 100644 --- a/executables/nr-gnb.c +++ b/executables/nr-gnb.c @@ -87,7 +87,6 @@ #include #include #include -//#define DEBUG_THREADS 1 //#define USRP_DEBUG 1 // Fix per CC openair rf/if device update @@ -114,7 +113,6 @@ time_stats_t softmodem_stats_rx_sf; // total rx time void tx_func(void *param) { processingData_L1tx_t *info = (processingData_L1tx_t *) param; - PHY_VARS_gNB *gNB = info->gNB; int frame_tx = info->frame; int slot_tx = info->slot; @@ -122,35 +120,9 @@ void tx_func(void *param) { frame_tx, slot_tx, 1); - info->slot = -1; - //if ((frame_tx&127) == 0) dump_pdsch_stats(fd,gNB); - - // If the later of the 2 L1 tx thread finishes first, - // we wait for the earlier one to finish and start the RU thread - // to avoid realtime issues with USRP - - // Start RU TX processing. - notifiedFIFO_elt_t *res; - res = pullTpool(gNB->resp_RU_tx, gNB->threadPool); - processingData_RU_t *syncMsg = (processingData_RU_t *)NotifiedFifoData(res); - LOG_D(PHY,"waiting for previous tx to finish, next slot %d,%d\n",syncMsg->next_slot,slot_tx); - while (syncMsg->next_slot != slot_tx) { - pushNotifiedFIFO(gNB->resp_RU_tx, res); - res = pullTpool(gNB->resp_RU_tx, gNB->threadPool); - syncMsg = (processingData_RU_t *)NotifiedFifoData(res); - } - LOG_D(PHY,"previous tx finished, next slot %d,%d\n",syncMsg->next_slot,slot_tx); - syncMsg->frame_tx = frame_tx; - syncMsg->slot_tx = slot_tx; - syncMsg->next_slot = get_next_downlink_slot(gNB, &gNB->gNB_config, frame_tx, slot_tx); - syncMsg->timestamp_tx = info->timestamp_tx; - syncMsg->ru = gNB->RU_list[0]; - res->key = slot_tx; - pushTpool(gNB->threadPool, res); } void rx_func(void *param) { - processingData_L1_t *info = (processingData_L1_t *) param; PHY_VARS_gNB *gNB = info->gNB; int frame_rx = info->frame_rx; @@ -275,15 +247,12 @@ void rx_func(void *param) { if (tx_slot_type == NR_DOWNLINK_SLOT || tx_slot_type == NR_MIXED_SLOT) { notifiedFIFO_elt_t *res; - res = pullTpool(gNB->resp_L1_tx, gNB->threadPool); - processingData_L1tx_t *syncMsg = (processingData_L1tx_t *)NotifiedFifoData(res); - while (syncMsg->slot != slot_tx) { - pushNotifiedFIFO(gNB->resp_L1_tx, res); - res = pullTpool(gNB->resp_L1_tx, gNB->threadPool); - syncMsg = (processingData_L1tx_t *)NotifiedFifoData(res); - } + processingData_L1tx_t *syncMsg; + // Its a FIFO so it maitains the order in which the MAC fills the messages + // so no need for checking for right slot + res = pullTpool(gNB->L1_tx_filled, gNB->threadPool); + syncMsg = (processingData_L1tx_t *)NotifiedFifoData(res); syncMsg->gNB = gNB; - AssertFatal(syncMsg->slot == slot_tx, "Thread message slot and logical slot number do not match\n"); syncMsg->timestamp_tx = info->timestamp_tx; res->key = slot_tx; pushTpool(gNB->threadPool, res); @@ -331,8 +300,8 @@ void rx_func(void *param) { } static void dump_L1_meas_stats(PHY_VARS_gNB *gNB, RU_t *ru, char *output) { int stroff = 0; - stroff += print_meas_log(gNB->phy_proc_tx_0, "L1 Tx processing thread 0", NULL, NULL, output); - stroff += print_meas_log(gNB->phy_proc_tx_1, "L1 Tx processing thread 1", NULL, NULL, output+stroff); + stroff += print_meas_log(gNB->phy_proc_tx[0], "L1 Tx processing thread 0", NULL, NULL, output); + //stroff += print_meas_log(gNB->phy_proc_tx[1], "L1 Tx processing thread 1", NULL, NULL, output+stroff); stroff += print_meas_log(&gNB->dlsch_encoding_stats, "DLSCH encoding", NULL, NULL, output+stroff); stroff += print_meas_log(&gNB->phy_proc_rx, "L1 Rx processing", NULL, NULL, output+stroff); stroff += print_meas_log(&gNB->ul_indication_stats, "UL Indication", NULL, NULL, output+stroff); @@ -367,8 +336,8 @@ void *nrL1_stats_thread(void *param) { fd=fopen("nrL1_stats.log","w"); AssertFatal(fd!=NULL,"Cannot open nrL1_stats.log\n"); - reset_meas(gNB->phy_proc_tx_0); - reset_meas(gNB->phy_proc_tx_1); + reset_meas(gNB->phy_proc_tx[0]); + //reset_meas(gNB->phy_proc_tx[1]); reset_meas(&gNB->dlsch_encoding_stats); reset_meas(&gNB->phy_proc_rx); reset_meas(&gNB->ul_indication_stats); @@ -389,6 +358,52 @@ void *nrL1_stats_thread(void *param) { return(NULL); } +// This thread reads the finished L1 tx jobs from threaPool +// and pushes RU tx thread in the right order. It works only +// two parallel L1 tx threads. +void *tx_reorder_thread(void* param) { + PHY_VARS_gNB *gNB = (PHY_VARS_gNB *)param; + notifiedFIFO_elt_t *resL1Reserve = NULL; + + + resL1Reserve=pullTpool(gNB->L1_tx_out, gNB->threadPool); + int next_tx_slot=((processingData_L1tx_t *)NotifiedFifoData(resL1Reserve))->slot; + + while (!oai_exit) { + notifiedFIFO_elt_t *resL1; + if (resL1Reserve) { + resL1=resL1Reserve; + if (((processingData_L1tx_t *)NotifiedFifoData(resL1))->slot != next_tx_slot) { + LOG_E(PHY,"order mistake"); + resL1Reserve=NULL; + resL1 = pullTpool(gNB->L1_tx_out, gNB->threadPool); + } + } else { + resL1 = pullTpool(gNB->L1_tx_out, gNB->threadPool); + if (((processingData_L1tx_t *)NotifiedFifoData(resL1))->slot != next_tx_slot) { + if (resL1Reserve) + LOG_E(PHY,"error, have a stored packet, then a second one\n"); + resL1Reserve=resL1; + resL1 = pullTpool(gNB->L1_tx_out, gNB->threadPool); + if (((processingData_L1tx_t *)NotifiedFifoData(resL1))->slot != next_tx_slot) + LOG_E(PHY,"error, pull two msg, none is good\n"); + } + } + processingData_L1tx_t *syncMsgL1= (processingData_L1tx_t *)NotifiedFifoData(resL1); + processingData_RU_t syncMsgRU; + syncMsgRU.frame_tx = syncMsgL1->frame; + syncMsgRU.slot_tx = syncMsgL1->slot; + syncMsgRU.timestamp_tx = syncMsgL1->timestamp_tx; + syncMsgRU.ru = gNB->RU_list[0]; + next_tx_slot = get_next_downlink_slot(gNB, &gNB->gNB_config, syncMsgRU.frame_tx, syncMsgRU.slot_tx); + pushNotifiedFIFO(gNB->L1_tx_free, resL1); + if (resL1==resL1Reserve) + resL1Reserve=NULL; + ru_tx_func((void*)&syncMsgRU); + } + return(NULL); +} + void init_gNB_Tpool(int inst) { PHY_VARS_gNB *gNB; gNB = RC.gNB[inst]; @@ -420,40 +435,29 @@ void init_gNB_Tpool(int inst) { pushNotifiedFIFO(gNB->resp_L1,msg); // to unblock the process in the beginning // L1 TX result FIFO - gNB->resp_L1_tx = (notifiedFIFO_t*) malloc(sizeof(notifiedFIFO_t)); - initNotifiedFIFO(gNB->resp_L1_tx); + gNB->L1_tx_free = (notifiedFIFO_t*) malloc(sizeof(notifiedFIFO_t)); + gNB->L1_tx_filled = (notifiedFIFO_t*) malloc(sizeof(notifiedFIFO_t)); + gNB->L1_tx_out = (notifiedFIFO_t*) malloc(sizeof(notifiedFIFO_t)); + initNotifiedFIFO(gNB->L1_tx_free); + initNotifiedFIFO(gNB->L1_tx_filled); + initNotifiedFIFO(gNB->L1_tx_out); + // we create 2 threads for L1 tx processing - notifiedFIFO_elt_t *msgL1Tx = newNotifiedFIFO_elt(sizeof(processingData_L1tx_t),0,gNB->resp_L1_tx,tx_func); - processingData_L1tx_t *msgDataTx = (processingData_L1tx_t *)NotifiedFifoData(msgL1Tx); - init_DLSCH_struct(gNB, msgDataTx); - msgDataTx->slot = -1; - memset(msgDataTx->ssb, 0, 64*sizeof(NR_gNB_SSB_t)); - reset_meas(&msgDataTx->phy_proc_tx); - gNB->phy_proc_tx_0 = &msgDataTx->phy_proc_tx; - pushNotifiedFIFO(gNB->resp_L1_tx,msgL1Tx); // to unblock the process in the beginning - - msgL1Tx = newNotifiedFIFO_elt(sizeof(processingData_L1tx_t),0,gNB->resp_L1_tx,tx_func); - msgDataTx = (processingData_L1tx_t *)NotifiedFifoData(msgL1Tx); - init_DLSCH_struct(gNB, msgDataTx); - msgDataTx->slot = -1; - memset(msgDataTx->ssb, 0, 64*sizeof(NR_gNB_SSB_t)); - reset_meas(&msgDataTx->phy_proc_tx); - gNB->phy_proc_tx_1 = &msgDataTx->phy_proc_tx; - pushNotifiedFIFO(gNB->resp_L1_tx,msgL1Tx); // to unblock the process in the beginning - - // RU TX result FIFO - gNB->resp_RU_tx = (notifiedFIFO_t*) malloc(sizeof(notifiedFIFO_t)); - initNotifiedFIFO(gNB->resp_RU_tx); - notifiedFIFO_elt_t *msgRUTx = newNotifiedFIFO_elt(sizeof(processingData_RU_t),0,gNB->resp_RU_tx,ru_tx_func); - processingData_RU_t *msgData = (processingData_RU_t*)msgRUTx->msgData; - int first_tx_slot = sf_ahead*gNB->frame_parms.slots_per_subframe; - msgData->next_slot = get_next_downlink_slot(gNB, &gNB->gNB_config, 0, first_tx_slot-1); - pushNotifiedFIFO(gNB->resp_RU_tx,msgRUTx); // to unblock the process in the beginning - - if (!get_softmodem_params()->emulate_l1) { - threadCreate(&proc->L1_stats_thread,nrL1_stats_thread,(void*)gNB,"L1_stats",-1,OAI_PRIORITY_RT_LOW); + for (int i=0; i < 1; i++) { + notifiedFIFO_elt_t *msgL1Tx = newNotifiedFIFO_elt(sizeof(processingData_L1tx_t),0,gNB->L1_tx_out,tx_func); + processingData_L1tx_t *msgDataTx = (processingData_L1tx_t *)NotifiedFifoData(msgL1Tx); + init_DLSCH_struct(gNB, msgDataTx); + memset(msgDataTx->ssb, 0, 64*sizeof(NR_gNB_SSB_t)); + reset_meas(&msgDataTx->phy_proc_tx); + gNB->phy_proc_tx[i] = &msgDataTx->phy_proc_tx; + pushNotifiedFIFO(gNB->L1_tx_free,msgL1Tx); // to unblock the process in the beginning } + if (!get_softmodem_params()->emulate_l1) + threadCreate(&proc->L1_stats_thread,nrL1_stats_thread,(void*)gNB,"L1_stats",-1,OAI_PRIORITY_RT_LOW); + + threadCreate(&proc->pthread_tx_reorder, tx_reorder_thread, (void *)gNB, "thread_tx_reorder", -1, OAI_PRIORITY_RT_MAX); + } diff --git a/executables/nr-ru.c b/executables/nr-ru.c index c8cce5f9a1..08decf0f67 100644 --- a/executables/nr-ru.c +++ b/executables/nr-ru.c @@ -1471,11 +1471,9 @@ void *ru_thread( void *param ) { res = pullNotifiedFIFO(gNB->resp_L1); delNotifiedFIFO_elt(res); - res = pullNotifiedFIFO(gNB->resp_L1_tx); + res = pullNotifiedFIFO(gNB->L1_tx_free); delNotifiedFIFO_elt(res); - res = pullNotifiedFIFO(gNB->resp_L1_tx); - delNotifiedFIFO_elt(res); - res = pullNotifiedFIFO(gNB->resp_RU_tx); + res = pullNotifiedFIFO(gNB->L1_tx_free); delNotifiedFIFO_elt(res); ru_thread_status = 0; diff --git a/executables/nr-softmodem-common.h b/executables/nr-softmodem-common.h index c02155326b..45d7852adc 100644 --- a/executables/nr-softmodem-common.h +++ b/executables/nr-softmodem-common.h @@ -87,8 +87,9 @@ #define CONFIG_HLP_NOTWAIT "don't wait for tracer, start immediately\n" #define CONFIG_HLP_TNOFORK "to ease debugging with gdb\n" #define CONFIG_HLP_DISABLNBIOT "disable nb-iot, even if defined in config\n" -#define CONFIG_HLP_DISABLETIMECORR "disable UE timing correction\n" -#define CONFIG_HLP_RRC_CFG_PATH "path for RRC configuration\n" +#define CONFIG_HLP_DISABLETIMECORR "disable UE timing correction\n" +#define CONFIG_HLP_RRC_CFG_PATH "path for RRC configuration\n" +#define CONFIG_HLP_UECAP_FILE "path for UE Capabilities file\n" #define CONFIG_HLP_NUMEROLOGY "adding numerology for 5G\n" #define CONFIG_HLP_EMULATE_RF "Emulated RF enabled(disable by defult)\n" diff --git a/executables/nr-softmodem.c b/executables/nr-softmodem.c index 2b8335167a..5f57919645 100644 --- a/executables/nr-softmodem.c +++ b/executables/nr-softmodem.c @@ -111,16 +111,11 @@ int32_t uplink_frequency_offset[MAX_NUM_CCs][4]; //Temp fix for inexistent NR upper layer unsigned char NB_gNB_INST = 1; +char *uecap_file; - -int UE_scan = 1; -int UE_scan_carrier = 0; runmode_t mode = normal_txrx; static double snr_dB=20; -FILE *input_fd=NULL; - - #if MAX_NUM_CCs == 1 rx_gain_t rx_gain_mode[MAX_NUM_CCs][4] = {{max_gain,max_gain,max_gain,max_gain}}; double tx_gain[MAX_NUM_CCs][4] = {{20,0,0,0}}; @@ -193,8 +188,6 @@ openair0_config_t openair0_cfg[MAX_CARDS]; double cpuf; -extern char uecap_xer[1024]; -char uecap_xer_in=0; /* see file openair2/LAYER2/MAC/main.c for why abstraction_flag is needed * this is very hackish - find a proper solution @@ -710,6 +703,7 @@ int main( int argc, char **argv ) { // don't create if node doesn't connect to RRC/S1/GTP int ret=create_gNB_tasks(1); AssertFatal(ret==0,"cannot create ITTI tasks\n"); + /* Start the agent. If it is turned off in the configuration, it won't start */ /* RCconfig_nr_flexran(); diff --git a/executables/nr-softmodem.h b/executables/nr-softmodem.h index 896c363cbf..4190a6074b 100644 --- a/executables/nr-softmodem.h +++ b/executables/nr-softmodem.h @@ -29,6 +29,7 @@ {"D" , CONFIG_HLP_DLBM_PHYTEST,0, u64ptr:&dlsch_slot_bitmap, defintval:0, TYPE_UINT64, 0}, \ {"U" , CONFIG_HLP_ULBM_PHYTEST,0, u64ptr:&ulsch_slot_bitmap, defintval:0, TYPE_UINT64, 0}, \ {"usrp-tx-thread-config", CONFIG_HLP_USRP_THREAD, 0, iptr:&usrp_tx_thread, defstrval:0, TYPE_INT, 0}, \ + {"uecap_file", CONFIG_HLP_UECAP_FILE, 0, strptr:(char **)&uecap_file, defstrval:"./uecap.xml", TYPE_STRING, 0}, \ {"s" , CONFIG_HLP_SNR, 0, dblptr:&snr_dB, defdblval:25, TYPE_DOUBLE, 0}, \ } @@ -41,6 +42,7 @@ extern uint32_t target_dl_bw; extern uint32_t target_ul_bw; extern uint64_t dlsch_slot_bitmap; extern uint64_t ulsch_slot_bitmap; +extern char *uecap_file; // In nr-gnb.c extern void init_gNB(int single_thread_flag,int wait_for_sync); diff --git a/executables/nr-ue.c b/executables/nr-ue.c index 05f9efae3c..2e7b2ea0e1 100644 --- a/executables/nr-ue.c +++ b/executables/nr-ue.c @@ -1140,13 +1140,15 @@ void *UE_thread(void *arg) { return NULL; } -void init_NR_UE(int nb_inst, char* rrc_config_path) { +void init_NR_UE(int nb_inst, + char* uecap_file, + char* rrc_config_path) { int inst; NR_UE_MAC_INST_t *mac_inst; NR_UE_RRC_INST_t* rrc_inst; for (inst=0; inst < nb_inst; inst++) { - AssertFatal((rrc_inst = nr_l3_init_ue(rrc_config_path)) != NULL, "can not initialize RRC module\n"); + AssertFatal((rrc_inst = nr_l3_init_ue(uecap_file,rrc_config_path)) != NULL, "can not initialize RRC module\n"); AssertFatal((mac_inst = nr_l2_init_ue(rrc_inst)) != NULL, "can not initialize L2 module\n"); AssertFatal((mac_inst->if_module = nr_ue_if_module_init(inst)) != NULL, "can not initialize IF module\n"); } diff --git a/executables/nr-uesoftmodem.c b/executables/nr-uesoftmodem.c index c718b7a15c..ddbbbdf52c 100644 --- a/executables/nr-uesoftmodem.c +++ b/executables/nr-uesoftmodem.c @@ -118,6 +118,7 @@ int vcdflag = 0; double rx_gain_off = 0.0; char *usrp_args = NULL; char *rrc_config_path = NULL; +char *uecap_file = NULL; int dumpframe = 0; uint64_t downlink_frequency[MAX_NUM_CCs][4]; @@ -150,8 +151,6 @@ int numerology = 0; int oaisim_flag = 0; int emulate_rf = 0; uint32_t N_RB_DL = 106; -char uecap_xer_in = 0; -char uecap_xer[1024]; /* see file openair2/LAYER2/MAC/main.c for why abstraction_flag is needed * this is very hackish - find a proper solution @@ -264,14 +263,6 @@ static void get_options(void) { if (vcdflag > 0) ouput_vcd = 1; - - if ( !(CONFIG_ISFLAGSET(CONFIG_ABORT)) && (!(CONFIG_ISFLAGSET(CONFIG_NOOOPT))) ) { - // Here the configuration file is the XER encoded UE capabilities - // Read it in and store in asn1c data structures - sprintf(uecap_xer,"%stargets/PROJECTS/GENERIC-LTE-EPC/CONF/UE_config.xml",getenv("OPENAIR_HOME")); - printf("%s\n",uecap_xer); - uecap_xer_in=1; - } /* UE with config file */ } // set PHY vars from command line @@ -454,7 +445,7 @@ int main( int argc, char **argv ) { #endif LOG_I(HW, "Version: %s\n", PACKAGE_VERSION); - init_NR_UE(1,rrc_config_path); + init_NR_UE(1,uecap_file,rrc_config_path); int mode_offset = get_softmodem_params()->nsa ? NUMBER_OF_UE_MAX : 1; uint16_t node_number = get_softmodem_params()->node_number; diff --git a/executables/nr-uesoftmodem.h b/executables/nr-uesoftmodem.h index eb7175be9d..95914678e5 100644 --- a/executables/nr-uesoftmodem.h +++ b/executables/nr-uesoftmodem.h @@ -33,8 +33,9 @@ {"dlsch-parallel", CONFIG_HLP_DLSCH_PARA, 0, iptr:(int32_t *)&nrUE_params.nr_dlsch_parallel, defintval:0, TYPE_UINT8, 0}, \ {"offset-divisor", CONFIG_HLP_OFFSET_DIV, 0, uptr:(uint32_t *)&nrUE_params.ofdm_offset_divisor, defuintval:UINT_MAX, TYPE_UINT32, 0}, \ {"nr-dlsch-demod-shift", CONFIG_HLP_DLSHIFT, 0, iptr:(int32_t *)&nr_dlsch_demod_shift, defintval:0, TYPE_INT, 0}, \ - {"V" , CONFIG_HLP_VCD, PARAMFLAG_BOOL, iptr:&vcdflag, defintval:0, TYPE_INT, 0}, \ - {"rrc_config_path", CONFIG_HLP_RRC_CFG_PATH,0, strptr:(char **)&rrc_config_path, defstrval:"./", TYPE_STRING, 0}, \ + {"V" , CONFIG_HLP_VCD, PARAMFLAG_BOOL, iptr:&vcdflag, defintval:0, TYPE_INT, 0}, \ + {"uecap_file", CONFIG_HLP_UECAP_FILE, 0, strptr:(char **)&uecap_file, defstrval:"./uecap.xml", TYPE_STRING, 0}, \ + {"rrc_config_path", CONFIG_HLP_RRC_CFG_PATH,0, strptr:(char **)&rrc_config_path, defstrval:"./", TYPE_STRING, 0}, \ {"ue-idx-standalone", NULL, 0, u16ptr:&ue_idx_standalone, defuintval:0xFFFF, TYPE_UINT16, 0} \ } @@ -85,7 +86,7 @@ extern nrUE_params_t *get_nrUE_params(void); // In nr-ue.c extern int setup_nr_ue_buffers(PHY_VARS_NR_UE **phy_vars_ue, openair0_config_t *openair0_cfg); extern void fill_ue_band_info(void); -extern void init_NR_UE(int, char*); +extern void init_NR_UE(int, char*, char*); extern void init_NR_UE_threads(int); extern void reset_opp_meas(void); extern void print_opp_meas(void); diff --git a/nfapi/oai_integration/nfapi_pnf.c b/nfapi/oai_integration/nfapi_pnf.c index 8600e4c34e..205f879964 100644 --- a/nfapi/oai_integration/nfapi_pnf.c +++ b/nfapi/oai_integration/nfapi_pnf.c @@ -1101,41 +1101,10 @@ void pnf_phy_deallocate_p7_vendor_ext(nfapi_p7_message_header_t *header) { notifiedFIFO_elt_t *l1tx_message_extract(PHY_VARS_gNB *gNB, int frame, int slot) { notifiedFIFO_elt_t *res; - notifiedFIFO_elt_t *freeRes = NULL; - // check first message - res = pullTpool(gNB->resp_L1_tx, gNB->threadPool); - processingData_L1tx_t *msgTx = (processingData_L1tx_t *)NotifiedFifoData(res); - if (msgTx->slot == slot) { - return res; - } - if (msgTx->slot == -1) { - freeRes = res; - } - - // check second message - pushNotifiedFIFO(gNB->resp_L1_tx,res); - res = pullTpool(gNB->resp_L1_tx, gNB->threadPool); - msgTx = (processingData_L1tx_t *)NotifiedFifoData(res); - if (msgTx->slot == slot) { - return res; - } - if (msgTx->slot == -1) { - freeRes = res; - } - - if (freeRes) { - msgTx = (processingData_L1tx_t *)NotifiedFifoData(res); - msgTx->num_pdsch_slot=0; - msgTx->num_dl_pdcch = 0; - msgTx->num_ul_pdcch = 0; - msgTx->slot = slot; - msgTx->frame = frame; - return freeRes; - } - pushNotifiedFIFO(gNB->resp_L1_tx,res); - AssertFatal(1==0, "It means both L1 Tx messages are still waiting to be processed. This happens when L1 Tx processing is too slow. Message slot %d, scheduled slot %d\n", - msgTx->slot, slot); + //TODO: This needs to be reworked for nfapi to work + res = pullTpool(gNB->L1_tx_free, gNB->threadPool); + return res; } int pnf_phy_ul_dci_req(gNB_L1_rxtx_proc_t *proc, nfapi_pnf_p7_config_t *pnf_p7, nfapi_nr_ul_dci_request_t *req) { @@ -1161,7 +1130,7 @@ int pnf_phy_ul_dci_req(gNB_L1_rxtx_proc_t *proc, nfapi_pnf_p7_config_t *pnf_p7, } } - pushNotifiedFIFO(gNB->resp_L1_tx,res); + pushNotifiedFIFO(gNB->L1_tx_filled,res); return 0; } @@ -1268,7 +1237,7 @@ int pnf_phy_dl_tti_req(gNB_L1_rxtx_proc_t *proc, nfapi_pnf_p7_config_t *pnf_p7, else { NFAPI_TRACE(NFAPI_TRACE_ERROR, "%s() UNKNOWN:%d\n", __FUNCTION__, dl_tti_pdu_list[i].PDUType); } - pushNotifiedFIFO(gNB->resp_L1_tx,res); + pushNotifiedFIFO(gNB->L1_tx_filled,res); } if(req->vendor_extension) diff --git a/nfapi/open-nFAPI/nfapi/public_inc/fapi_nr_ue_interface.h b/nfapi/open-nFAPI/nfapi/public_inc/fapi_nr_ue_interface.h index 21cbaf93c1..4ef7a73152 100644 --- a/nfapi/open-nFAPI/nfapi/public_inc/fapi_nr_ue_interface.h +++ b/nfapi/open-nFAPI/nfapi/public_inc/fapi_nr_ue_interface.h @@ -353,6 +353,8 @@ typedef struct { } fapi_nr_ul_config_request_pdu_t; typedef struct { + //uint16_t sfn; + //uint16_t slot; uint16_t sfn; uint16_t slot; uint8_t number_pdus; diff --git a/openair1/PHY/NR_REFSIG/ptrs_nr.c b/openair1/PHY/NR_REFSIG/ptrs_nr.c index d3d4bf0faf..40a6a56611 100644 --- a/openair1/PHY/NR_REFSIG/ptrs_nr.c +++ b/openair1/PHY/NR_REFSIG/ptrs_nr.c @@ -105,10 +105,9 @@ void set_ptrs_symb_idx(uint16_t *ptrs_symbols, uint8_t L_ptrs, uint16_t ul_dmrs_symb_pos) { - uint i = 0, last_symbol, l_ref; - int l_counter; - l_ref = start_symbol; - last_symbol = start_symbol + duration_in_symbols - 1; + int i = 0; + int l_ref = start_symbol; + const int last_symbol = start_symbol + duration_in_symbols - 1; if (L_ptrs==0) { LOG_E(PHY,"bug: impossible L_ptrs\n"); *ptrs_symbols = 0; @@ -117,7 +116,7 @@ void set_ptrs_symb_idx(uint16_t *ptrs_symbols, while ( (l_ref + i*L_ptrs) <= last_symbol) { - int is_dmrs_symbol = 0; + int is_dmrs_symbol = 0, l_counter; for(l_counter = l_ref + i*L_ptrs; l_counter >= max(l_ref + (i-1)*L_ptrs + 1, l_ref); l_counter--) { @@ -269,8 +268,8 @@ void nr_ptrs_cpe_estimation(uint8_t K_ptrs, return; } uint16_t sc_per_symbol = (nb_rb + K_ptrs - 1)/K_ptrs; - int16_t *ptrs_p = (int16_t *)malloc(sizeof(int32_t)*((1 + sc_per_symbol/4)*4)); - int16_t *dmrs_comp_p = (int16_t *)malloc(sizeof(int32_t)*((1 + sc_per_symbol/4)*4)); + struct complex16 ptrs_p[(1 + sc_per_symbol/4)*4]; + struct complex16 dmrs_comp_p[(1 + sc_per_symbol/4)*4]; double abs = 0.0; double real = 0.0; double imag = 0.0; @@ -278,7 +277,7 @@ void nr_ptrs_cpe_estimation(uint8_t K_ptrs, double alpha = 0; #endif /* generate PTRS RE for the symbol */ - nr_gen_ref_conj_symbols(gold_seq,sc_per_symbol*2,ptrs_p, NR_MOD_TABLE_QPSK_OFFSET,2);// 2 for QPSK + nr_gen_ref_conj_symbols(gold_seq,sc_per_symbol*2,(int16_t*)ptrs_p, NR_MOD_TABLE_QPSK_OFFSET,2);// 2 for QPSK /* loop over all sub carriers to get compensated RE on ptrs symbols*/ for (int re = 0; re < nb_re_pdsch; re++) { @@ -292,8 +291,8 @@ void nr_ptrs_cpe_estimation(uint8_t K_ptrs, 0,// start_re is 0 here ofdm_symbol_size); if(is_ptrs_re) { - dmrs_comp_p[re_cnt*2] = rxF_comp[re *2]; - dmrs_comp_p[(re_cnt*2)+1] = rxF_comp[(re *2)+1]; + dmrs_comp_p[re_cnt].r = rxF_comp[re *2]; + dmrs_comp_p[re_cnt].i = rxF_comp[(re *2)+1]; re_cnt++; } else { @@ -307,7 +306,7 @@ void nr_ptrs_cpe_estimation(uint8_t K_ptrs, *ptrs_sc = re_cnt; /*Multiple compensated data with conj of PTRS */ - mult_cpx_vector(dmrs_comp_p, ptrs_p, ptrs_ch_p,(1 + sc_per_symbol/4)*4,15); // 2^15 shifted + mult_cpx_vector((int16_t*)dmrs_comp_p, (int16_t*)ptrs_p, ptrs_ch_p,(1 + sc_per_symbol/4)*4,15); // 2^15 shifted /* loop over all ptrs sub carriers in a symbol */ /* sum the error vector */ @@ -331,9 +330,6 @@ void nr_ptrs_cpe_estimation(uint8_t K_ptrs, #ifdef DEBUG_PTRS printf("[PHY][PTRS]: Estimated Symbol %d -> %d + j* %d \n",symbol, error_est[0], error_est[1] ); #endif - /* free vectors */ - free(ptrs_p); - free(dmrs_comp_p); } @@ -426,9 +422,10 @@ void get_slope_from_estimates(uint8_t start, uint8_t end, int16_t *est_p, double /* estimate from slope */ void ptrs_estimate_from_slope(int16_t *error_est, double *slope_p, uint8_t start, uint8_t end) { + struct complex16 *error=(struct complex16 *) error_est; for(uint8_t i = 1; i< (end -start);i++) { - error_est[(start+i)*2] = (error_est[start*2] + (int16_t)(i * slope_p[0]));// real - error_est[((start +i)*2)+1] = (error_est[(start*2)+1] + (int16_t)( i * slope_p[1])); //imag + error[start+i].r = error[start].r + (int16_t)(i * slope_p[0]);// real + error[start+i].i = error[start].i + (int16_t)(i * slope_p[1]); //imag #ifdef DEBUG_PTRS printf("[PHY][PTRS]: Estimated Symbol %2d -> %4d %4d from Slope (%4f %4f)\n", start+i,error_est[(start+i)*2],error_est[((start +i)*2)+1], slope_p[0],slope_p[1]); diff --git a/openair1/PHY/NR_TRANSPORT/nr_dlsch_coding.c b/openair1/PHY/NR_TRANSPORT/nr_dlsch_coding.c index afd1fc6e0d..819fccc588 100644 --- a/openair1/PHY/NR_TRANSPORT/nr_dlsch_coding.c +++ b/openair1/PHY/NR_TRANSPORT/nr_dlsch_coding.c @@ -294,8 +294,8 @@ int nr_dlsch_encoding(PHY_VARS_gNB *gNB, VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_gNB_DLSCH_ENCODING, VCD_FUNCTION_IN); uint32_t A = rel15->TBSize[0]<<3; - if ( dlsch->rnti != SI_RNTI ) - trace_NRpdu(DIRECTION_DOWNLINK, a, rel15->TBSize[0], 0, WS_C_RNTI, dlsch->rnti, frame, slot,0, 0); + if ( rel15->rnti != SI_RNTI) + trace_NRpdu(DIRECTION_DOWNLINK, a, rel15->TBSize[0], 0, WS_C_RNTI, rel15->rnti, frame, slot,0, 0); NR_gNB_SCH_STATS_t *stats=NULL; int first_free=-1; diff --git a/openair1/PHY/TOOLS/nr_phy_scope.c b/openair1/PHY/TOOLS/nr_phy_scope.c index 44adf02f57..5594d56693 100644 --- a/openair1/PHY/TOOLS/nr_phy_scope.c +++ b/openair1/PHY/TOOLS/nr_phy_scope.c @@ -33,7 +33,6 @@ #define ScaleZone 4 #define localBuff(NaMe,SiZe) float NaMe[SiZe]; memset(NaMe,0,sizeof(NaMe)); -int otg_enabled; const FL_COLOR rx_antenna_colors[4] = {FL_RED,FL_BLUE,FL_GREEN,FL_YELLOW}; const FL_COLOR water_colors[4] = {FL_BLUE,FL_GREEN,FL_YELLOW,FL_RED}; diff --git a/openair1/PHY/defs_gNB.h b/openair1/PHY/defs_gNB.h index fff94f7bfb..6f30861584 100644 --- a/openair1/PHY/defs_gNB.h +++ b/openair1/PHY/defs_gNB.h @@ -594,6 +594,8 @@ typedef struct gNB_L1_proc_t_s { pthread_t L1_stats_thread; /// pthread structure for printing time meas pthread_t process_stats_thread; + /// pthread structure for reordering L1 tx thread messages + pthread_t pthread_tx_reorder; /// flag to indicate first RX acquisition int first_rx; /// flag to indicate first TX transmission @@ -844,8 +846,7 @@ typedef struct PHY_VARS_gNB_s { /* time_stats_t phy_proc; */ - time_stats_t *phy_proc_tx_0; - time_stats_t *phy_proc_tx_1; + time_stats_t *phy_proc_tx[2]; time_stats_t phy_proc_rx; time_stats_t rx_prach; /* @@ -886,7 +887,9 @@ typedef struct PHY_VARS_gNB_s { */ notifiedFIFO_t *respDecode; notifiedFIFO_t *resp_L1; - notifiedFIFO_t *resp_L1_tx; + notifiedFIFO_t *L1_tx_free; + notifiedFIFO_t *L1_tx_filled; + notifiedFIFO_t *L1_tx_out; notifiedFIFO_t *resp_RU_tx; tpool_t *threadPool; int nbDecode; diff --git a/openair1/PHY/phy_vars.h b/openair1/PHY/phy_vars.h index 9fd186ec4f..d99a3016ba 100644 --- a/openair1/PHY/phy_vars.h +++ b/openair1/PHY/phy_vars.h @@ -82,8 +82,7 @@ const double sinr_to_cqi[4][16]= { {-2.5051, -2.5051, -1.7451, -0.3655, 1.0812, { -4.1057, -4.1057, -3.3768, -2.2916, -1.1392, 0.1236, 1.2849, 3.1933, 5.9298, 6.4052, 9.6245, 10.9414, 13.5166, 14.9545, 14.9545, 14.9545} }; -//int cqi_to_mcs[16]={0, 0, 1, 3, 5, 7, 9, 13, 15, 16, 20, 23, 25, 27, 27, 27}; -const int cqi_to_mcs[16]= {0, 0, 1, 2, 4, 6, 8, 11, 13, 16, 18, 20, 23, 25, 27, 27}; +const int cqi_to_mcs[16]= {0, 0, 1, 2, 4, 6, 8, 11, 13, 16, 18, 20, 23, 25, 27, 28}; //for SNR to MI conversion 7 th order Polynomial coeff const double q_qam16[8]= {3.21151853033897e-10,5.55435952230651e-09,-2.30760065362117e-07,-6.25587743817859e-06,4.62251036452795e-06,0.00224150813158937,0.0393723140344367,0.245486379182639}; diff --git a/openair1/PHY/phy_vars_nr_ue.h b/openair1/PHY/phy_vars_nr_ue.h index 303853add2..550a2f0394 100644 --- a/openair1/PHY/phy_vars_nr_ue.h +++ b/openair1/PHY/phy_vars_nr_ue.h @@ -83,9 +83,6 @@ const double sinr_to_cqi[4][16]= { {-2.5051, -2.5051, -1.7451, -0.3655, 1.0812, { -4.1057, -4.1057, -3.3768, -2.2916, -1.1392, 0.1236, 1.2849, 3.1933, 5.9298, 6.4052, 9.6245, 10.9414, 13.5166, 14.9545, 14.9545, 14.9545} }; -//int cqi_to_mcs[16]={0, 0, 1, 3, 5, 7, 9, 13, 15, 16, 20, 23, 25, 27, 27, 27}; -const int cqi_to_mcs[16]= {0, 0, 1, 2, 4, 6, 8, 11, 13, 16, 18, 20, 23, 25, 27, 27}; - //for SNR to MI conversion 7 th order Polynomial coeff const double q_qam16[8]= {3.21151853033897e-10,5.55435952230651e-09,-2.30760065362117e-07,-6.25587743817859e-06,4.62251036452795e-06,0.00224150813158937,0.0393723140344367,0.245486379182639}; const double q_qpsk[8]= {1.94491167814437e-09,8.40494123817774e-08,4.75527131198034e-07,-2.48946285301621e-05,-0.000347614016158364,0.00209252225437100,0.0742986115462510,0.488297879889425}; diff --git a/openair1/PHY/phy_vars_ue.h b/openair1/PHY/phy_vars_ue.h index 2c1334b80b..2cdec82f0f 100644 --- a/openair1/PHY/phy_vars_ue.h +++ b/openair1/PHY/phy_vars_ue.h @@ -72,8 +72,7 @@ const double sinr_to_cqi[4][16]= { {-2.5051, -2.5051, -1.7451, -0.3655, 1.0812, { -4.1057, -4.1057, -3.3768, -2.2916, -1.1392, 0.1236, 1.2849, 3.1933, 5.9298, 6.4052, 9.6245, 10.9414, 13.5166, 14.9545, 14.9545, 14.9545} }; -//int cqi_to_mcs[16]={0, 0, 1, 3, 5, 7, 9, 13, 15, 16, 20, 23, 25, 27, 27, 27}; -const int cqi_to_mcs[16]= {0, 0, 1, 2, 4, 6, 8, 11, 13, 16, 18, 20, 23, 25, 27, 27}; +const int cqi_to_mcs[16]= {0, 0, 1, 2, 4, 6, 8, 11, 13, 16, 18, 20, 23, 25, 27, 28}; //for SNR to MI conversion 7 th order Polynomial coeff const double q_qam16[8]= {3.21151853033897e-10,5.55435952230651e-09,-2.30760065362117e-07,-6.25587743817859e-06,4.62251036452795e-06,0.00224150813158937,0.0393723140344367,0.245486379182639}; diff --git a/openair1/SCHED_NR/fapi_nr_l1.c b/openair1/SCHED_NR/fapi_nr_l1.c index 79a440c8c9..7eee6da55c 100644 --- a/openair1/SCHED_NR/fapi_nr_l1.c +++ b/openair1/SCHED_NR/fapi_nr_l1.c @@ -148,6 +148,9 @@ void nr_schedule_response(NR_Sched_Rsp_t *Sched_INFO){ AssertFatal(RC.gNB[Mod_id]!=NULL,"RC.gNB[%d] is null\n",Mod_id); gNB = RC.gNB[Mod_id]; + nfapi_nr_config_request_scf_t *cfg = &gNB->gNB_config; + + int slot_type = nr_slot_select(cfg,frame,slot); uint8_t number_dl_pdu = (DL_req==NULL) ? 0 : DL_req->dl_tti_request_body.nPDUs; uint8_t number_ul_dci_pdu = (UL_dci_req==NULL) ? 0 : UL_dci_req->numPdus; @@ -155,61 +158,56 @@ void nr_schedule_response(NR_Sched_Rsp_t *Sched_INFO){ uint8_t number_tx_data_pdu = (TX_req == NULL) ? 0 : TX_req->Number_of_PDUs; if (NFAPI_MODE == NFAPI_MONOLITHIC){ - notifiedFIFO_elt_t *res; - res = pullTpool(gNB->resp_L1_tx, gNB->threadPool); - processingData_L1tx_t *msgTx = (processingData_L1tx_t *)NotifiedFifoData(res); - if (DL_req != NULL && TX_req!=NULL && (number_dl_pdu > 0 || number_ul_dci_pdu > 0 || number_ul_tti_pdu > 0)) - LOG_D(PHY,"NFAPI: Sched_INFO:SFN/SLOT:%04d/%d DL_req:SFN/SLO:%04d/%d:dl_pdu:%d tx_req:SFN/SLOT:%04d/%d:pdus:%d;ul_dci %d ul_tti %d\n", - frame,slot, - DL_req->SFN,DL_req->Slot,number_dl_pdu, - TX_req->SFN,TX_req->Slot,TX_req->Number_of_PDUs, - number_ul_dci_pdu,number_ul_tti_pdu); - msgTx->num_pdsch_slot=0; - msgTx->num_dl_pdcch=0; - msgTx->num_ul_pdcch=number_ul_dci_pdu; - msgTx->slot = slot; - msgTx->frame = frame; + if (slot_type == NR_DOWNLINK_SLOT || slot_type == NR_MIXED_SLOT) { + notifiedFIFO_elt_t *res; + res = pullTpool(gNB->L1_tx_free, gNB->threadPool); + processingData_L1tx_t *msgTx = (processingData_L1tx_t *)NotifiedFifoData(res); - for (int i=0;idl_tti_request_body.dl_tti_pdu_list[i]; - LOG_D(PHY,"NFAPI: dl_pdu %d : type %d\n",i,dl_tti_pdu->PDUType); - switch (dl_tti_pdu->PDUType) { - case NFAPI_NR_DL_TTI_SSB_PDU_TYPE: - handle_nr_nfapi_ssb_pdu(msgTx,frame,slot, - dl_tti_pdu); - break; + msgTx->num_pdsch_slot=0; + msgTx->num_dl_pdcch=0; + msgTx->num_ul_pdcch=number_ul_dci_pdu; + msgTx->slot = slot; + msgTx->frame = frame; - case NFAPI_NR_DL_TTI_PDCCH_PDU_TYPE: - LOG_D(PHY,"frame %d, slot %d, Got NFAPI_NR_DL_TTI_PDCCH_PDU_TYPE for %d.%d\n",frame,slot,DL_req->SFN,DL_req->Slot); - msgTx->pdcch_pdu[msgTx->num_dl_pdcch] = dl_tti_pdu->pdcch_pdu; - msgTx->num_dl_pdcch++; - break; + for (int i=0;idl_tti_request_body.dl_tti_pdu_list[i]; + LOG_D(PHY,"NFAPI: dl_pdu %d : type %d\n",i,dl_tti_pdu->PDUType); + switch (dl_tti_pdu->PDUType) { + case NFAPI_NR_DL_TTI_SSB_PDU_TYPE: + handle_nr_nfapi_ssb_pdu(msgTx,frame,slot, + dl_tti_pdu); + break; - case NFAPI_NR_DL_TTI_CSI_RS_PDU_TYPE: - LOG_D(PHY,"frame %d, slot %d, Got NFAPI_NR_DL_TTI_CSI_RS_PDU_TYPE for %d.%d\n",frame,slot,DL_req->SFN,DL_req->Slot); - handle_nfapi_nr_csirs_pdu(msgTx,frame,slot, - &dl_tti_pdu->csi_rs_pdu); - break; + case NFAPI_NR_DL_TTI_PDCCH_PDU_TYPE: + LOG_D(PHY,"frame %d, slot %d, Got NFAPI_NR_DL_TTI_PDCCH_PDU_TYPE for %d.%d\n",frame,slot,DL_req->SFN,DL_req->Slot); + msgTx->pdcch_pdu[msgTx->num_dl_pdcch] = dl_tti_pdu->pdcch_pdu; + msgTx->num_dl_pdcch++; + break; - case NFAPI_NR_DL_TTI_PDSCH_PDU_TYPE: - LOG_D(PHY,"frame %d, slot %d, Got NFAPI_NR_DL_TTI_PDSCH_PDU_TYPE for %d.%d\n",frame,slot,DL_req->SFN,DL_req->Slot); - nfapi_nr_dl_tti_pdsch_pdu_rel15_t *pdsch_pdu_rel15 = &dl_tti_pdu->pdsch_pdu.pdsch_pdu_rel15; - uint16_t pduIndex = pdsch_pdu_rel15->pduIndex; - AssertFatal(TX_req->pdu_list[pduIndex].num_TLV == 1, "TX_req->pdu_list[%d].num_TLV %d != 1\n", - pduIndex,TX_req->pdu_list[pduIndex].num_TLV); - uint8_t *sdu = (uint8_t *)TX_req->pdu_list[pduIndex].TLVs[0].value.direct; - AssertFatal(msgTx->num_pdsch_slot < gNB->number_of_nr_dlsch_max,"Number of PDSCH PDUs %d exceeded the limit %d\n", - msgTx->num_pdsch_slot,gNB->number_of_nr_dlsch_max); - handle_nr_nfapi_pdsch_pdu(msgTx,&dl_tti_pdu->pdsch_pdu, sdu); + case NFAPI_NR_DL_TTI_CSI_RS_PDU_TYPE: + LOG_D(PHY,"frame %d, slot %d, Got NFAPI_NR_DL_TTI_CSI_RS_PDU_TYPE for %d.%d\n",frame,slot,DL_req->SFN,DL_req->Slot); + handle_nfapi_nr_csirs_pdu(msgTx,frame,slot,&dl_tti_pdu->csi_rs_pdu); + break; + + case NFAPI_NR_DL_TTI_PDSCH_PDU_TYPE: + LOG_D(PHY,"frame %d, slot %d, Got NFAPI_NR_DL_TTI_PDSCH_PDU_TYPE for %d.%d\n",frame,slot,DL_req->SFN,DL_req->Slot); + nfapi_nr_dl_tti_pdsch_pdu_rel15_t *pdsch_pdu_rel15 = &dl_tti_pdu->pdsch_pdu.pdsch_pdu_rel15; + uint16_t pduIndex = pdsch_pdu_rel15->pduIndex; + AssertFatal(TX_req->pdu_list[pduIndex].num_TLV == 1, "TX_req->pdu_list[%d].num_TLV %d != 1\n", + pduIndex,TX_req->pdu_list[pduIndex].num_TLV); + uint8_t *sdu = (uint8_t *)TX_req->pdu_list[pduIndex].TLVs[0].value.direct; + AssertFatal(msgTx->num_pdsch_slot < gNB->number_of_nr_dlsch_max,"Number of PDSCH PDUs %d exceeded the limit %d\n", + msgTx->num_pdsch_slot,gNB->number_of_nr_dlsch_max); + handle_nr_nfapi_pdsch_pdu(msgTx,&dl_tti_pdu->pdsch_pdu, sdu); + } } - } - for (int i=0; iul_pdcch_pdu[i] = UL_dci_req->ul_dci_pdu_list[i]; - } + for (int i=0; iul_pdcch_pdu[i] = UL_dci_req->ul_dci_pdu_list[i]; - pushNotifiedFIFO(gNB->resp_L1_tx,res); + pushNotifiedFIFO(gNB->L1_tx_filled,res); + } for (int i = 0; i < number_ul_tti_pdu; i++) { switch (UL_tti_req->pdus_list[i].pdu_type) { diff --git a/openair1/SCHED_NR/phy_procedures_nr_gNB.c b/openair1/SCHED_NR/phy_procedures_nr_gNB.c index ce8a63c29c..6ff7bbea00 100644 --- a/openair1/SCHED_NR/phy_procedures_nr_gNB.c +++ b/openair1/SCHED_NR/phy_procedures_nr_gNB.c @@ -128,6 +128,7 @@ void phy_procedures_gNB_TX(processingData_L1tx_t *msgTx, int frame, int slot, int do_meas) { + int aa; PHY_VARS_gNB *gNB = msgTx->gNB; NR_DL_FRAME_PARMS *fp=&gNB->frame_parms; @@ -202,6 +203,8 @@ void phy_procedures_gNB_TX(processingData_L1tx_t *msgTx, } VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_PROCEDURES_gNB_TX+offset,0); + //pthread_mutex_unlock(&mutextest); + } diff --git a/openair1/SCHED_NR_UE/fapi_nr_ue_l1.c b/openair1/SCHED_NR_UE/fapi_nr_ue_l1.c index f67c84a07c..4fd337eb09 100644 --- a/openair1/SCHED_NR_UE/fapi_nr_ue_l1.c +++ b/openair1/SCHED_NR_UE/fapi_nr_ue_l1.c @@ -419,6 +419,7 @@ int8_t nr_ue_scheduled_response(nr_scheduled_response_t *scheduled_response){ } } + //Clear the fields when all the config pdu are done if (pdu_done == ul_config->number_pdus) { if (scheduled_response->tx_request) @@ -429,6 +430,7 @@ int8_t nr_ue_scheduled_response(nr_scheduled_response_t *scheduled_response){ LOG_D(PHY, "%d.%d clear ul_config %p\n", scheduled_response->frame, slot, ul_config); memset(ul_config->ul_config_list, 0, sizeof(ul_config->ul_config_list)); } + pthread_mutex_unlock(&ul_config->mutex_ul_config); } } diff --git a/openair1/SIMULATION/NR_PHY/dlsim.c b/openair1/SIMULATION/NR_PHY/dlsim.c index dbe29bb0a1..308f7f4741 100644 --- a/openair1/SIMULATION/NR_PHY/dlsim.c +++ b/openair1/SIMULATION/NR_PHY/dlsim.c @@ -82,6 +82,7 @@ RAN_CONTEXT_t RC; int32_t uplink_frequency_offset[MAX_NUM_CCs][4]; double cpuf; +char *uecap_file; uint16_t sf_ahead=4 ; uint16_t sl_ahead=0; @@ -983,18 +984,21 @@ int main(int argc, char **argv) gNB->threadPool = (tpool_t*)malloc(sizeof(tpool_t)); initTpool(gNBthreads, gNB->threadPool, true); - gNB->resp_L1_tx = (notifiedFIFO_t*) malloc(sizeof(notifiedFIFO_t)); - initNotifiedFIFO(gNB->resp_L1_tx); + gNB->L1_tx_free = (notifiedFIFO_t*) malloc(sizeof(notifiedFIFO_t)); + gNB->L1_tx_filled = (notifiedFIFO_t*) malloc(sizeof(notifiedFIFO_t)); + gNB->L1_tx_out = (notifiedFIFO_t*) malloc(sizeof(notifiedFIFO_t)); + initNotifiedFIFO(gNB->L1_tx_free); + initNotifiedFIFO(gNB->L1_tx_filled); + initNotifiedFIFO(gNB->L1_tx_out); // we create 2 threads for L1 tx processing - notifiedFIFO_elt_t *msgL1Tx = newNotifiedFIFO_elt(sizeof(processingData_L1tx_t),0,gNB->resp_L1_tx,processSlotTX); + notifiedFIFO_elt_t *msgL1Tx = newNotifiedFIFO_elt(sizeof(processingData_L1tx_t),0,gNB->L1_tx_free,processSlotTX); processingData_L1tx_t *msgDataTx = (processingData_L1tx_t *)NotifiedFifoData(msgL1Tx); init_DLSCH_struct(gNB, msgDataTx); msgDataTx->slot = slot; msgDataTx->frame = frame; memset(msgDataTx->ssb, 0, 64*sizeof(NR_gNB_SSB_t)); reset_meas(&msgDataTx->phy_proc_tx); - gNB->phy_proc_tx_0 = &msgDataTx->phy_proc_tx; - pushTpool(gNB->threadPool,msgL1Tx); + gNB->phy_proc_tx[0] = &msgDataTx->phy_proc_tx; for (SNR = snr0; SNR < snr1; SNR += .2) { @@ -1071,6 +1075,7 @@ int main(int argc, char **argv) Sched_INFO.UL_tti_req = gNB_mac->UL_tti_req_ahead[slot]; Sched_INFO.UL_dci_req = NULL; Sched_INFO.TX_req = &gNB_mac->TX_req[0]; + pushNotifiedFIFO(gNB->L1_tx_free,msgL1Tx); nr_schedule_response(&Sched_INFO); /* PTRS values for DLSIM calculations */ @@ -1304,10 +1309,10 @@ int main(int argc, char **argv) printf("\n"); if (print_perf==1) { - printf("\ngNB TX function statistics (per %d us slot, NPRB %d, mcs %d, TBS %d)\n", + printf("\ngNB TX function statistics (per %d us slot, NPRB %d, mcs %d, block %d)\n", 1000>>*scc->ssbSubcarrierSpacing, g_rbSize, g_mcsIndex, msgDataTx->dlsch[0][0]->harq_process.pdsch_pdu.pdsch_pdu_rel15.TBSize[0]<<3); - printDistribution(gNB->phy_proc_tx_0,table_tx,"PHY proc tx"); + printDistribution(gNB->phy_proc_tx[0],table_tx,"PHY proc tx"); printStatIndent2(&gNB->dlsch_encoding_stats,"DLSCH encoding time"); printStatIndent3(&gNB->dlsch_segmentation_stats,"DLSCH segmentation time"); printStatIndent3(&gNB->tinput,"DLSCH LDPC input processing time"); diff --git a/openair1/SIMULATION/NR_PHY/prachsim.c b/openair1/SIMULATION/NR_PHY/prachsim.c index 6b9512a38b..fb0f37d7ac 100644 --- a/openair1/SIMULATION/NR_PHY/prachsim.c +++ b/openair1/SIMULATION/NR_PHY/prachsim.c @@ -60,6 +60,7 @@ LCHAN_DESC DCCH_LCHAN_DESC,DTCH_DL_LCHAN_DESC,DTCH_UL_LCHAN_DESC; rlc_info_t Rlc_info_um,Rlc_info_am_config; +char *uecap_file; PHY_VARS_gNB *gNB; PHY_VARS_NR_UE *UE; RAN_CONTEXT_t RC; diff --git a/openair1/SIMULATION/NR_PHY/ulsim.c b/openair1/SIMULATION/NR_PHY/ulsim.c index ceeded145a..ac991ae940 100644 --- a/openair1/SIMULATION/NR_PHY/ulsim.c +++ b/openair1/SIMULATION/NR_PHY/ulsim.c @@ -74,6 +74,7 @@ rlc_info_t Rlc_info_um,Rlc_info_am_config; PHY_VARS_gNB *gNB; PHY_VARS_NR_UE *UE; RAN_CONTEXT_t RC; +char *uecap_file; int32_t uplink_frequency_offset[MAX_NUM_CCs][4]; uint16_t sf_ahead=4 ; @@ -669,13 +670,16 @@ int main(int argc, char **argv) char tp_param[] = "n"; initTpool(tp_param, gNB->threadPool, false); initNotifiedFIFO(gNB->respDecode); - gNB->resp_L1_tx = (notifiedFIFO_t*) malloc(sizeof(notifiedFIFO_t)); - initNotifiedFIFO(gNB->resp_L1_tx); - notifiedFIFO_elt_t *msgL1Tx = newNotifiedFIFO_elt(sizeof(processingData_L1tx_t),0,gNB->resp_L1_tx,NULL); + gNB->L1_tx_free = (notifiedFIFO_t*) malloc(sizeof(notifiedFIFO_t)); + gNB->L1_tx_filled = (notifiedFIFO_t*) malloc(sizeof(notifiedFIFO_t)); + gNB->L1_tx_out = (notifiedFIFO_t*) malloc(sizeof(notifiedFIFO_t)); + initNotifiedFIFO(gNB->L1_tx_free); + initNotifiedFIFO(gNB->L1_tx_filled); + initNotifiedFIFO(gNB->L1_tx_out); + notifiedFIFO_elt_t *msgL1Tx = newNotifiedFIFO_elt(sizeof(processingData_L1tx_t),0,gNB->L1_tx_free,NULL); processingData_L1tx_t *msgDataTx = (processingData_L1tx_t *)NotifiedFifoData(msgL1Tx); msgDataTx->slot = -1; - gNB->phy_proc_tx_0 = &msgDataTx->phy_proc_tx; - pushNotifiedFIFO(gNB->resp_L1_tx,msgL1Tx); // to unblock the process in the beginning + gNB->phy_proc_tx[0] = &msgDataTx->phy_proc_tx; //gNB_config = &gNB->gNB_config; //memset((void *)&gNB->UL_INFO,0,sizeof(gNB->UL_INFO)); @@ -1117,6 +1121,7 @@ int main(int argc, char **argv) } // prepare ULSCH/PUSCH reception + pushNotifiedFIFO(gNB->L1_tx_free,msgL1Tx); // to unblock the process in the beginning nr_schedule_response(Sched_INFO); // --------- setting parameters for UE -------- diff --git a/openair2/GNB_APP/L1_nr_paramdef.h b/openair2/GNB_APP/L1_nr_paramdef.h index 0306713845..6545408b9b 100644 --- a/openair2/GNB_APP/L1_nr_paramdef.h +++ b/openair2/GNB_APP/L1_nr_paramdef.h @@ -65,7 +65,7 @@ {CONFIG_STRING_L1_REMOTE_N_PORTC, NULL, 0, uptr:NULL, defintval:50030, TYPE_UINT, 0}, \ {CONFIG_STRING_L1_LOCAL_N_PORTD, NULL, 0, uptr:NULL, defintval:50031, TYPE_UINT, 0}, \ {CONFIG_STRING_L1_REMOTE_N_PORTD, NULL, 0, uptr:NULL, defintval:50031, TYPE_UINT, 0}, \ -{CONFIG_STRING_L1_PUSCH_PROC_THREADS, NULL, 0, uptr:NULL, defintval:3, TYPE_UINT, 0}, \ +{CONFIG_STRING_L1_PUSCH_PROC_THREADS, NULL, 0, uptr:NULL, defintval:4, TYPE_UINT, 0}, \ {CONFIG_STRING_L1_OFDM_OFFSET_DIVISOR, NULL, 0, uptr:NULL, defuintval:8, TYPE_UINT, 0}, \ {CONFIG_STRING_L1_PUCCH0_DTX_THRESHOLD, NULL, 0, uptr:NULL, defintval:100, TYPE_UINT, 0}, \ {CONFIG_STRING_L1_PRACH_DTX_THRESHOLD, NULL, 0, uptr:NULL, defintval:150, TYPE_UINT, 0}, \ diff --git a/openair2/GNB_APP/gnb_config.c b/openair2/GNB_APP/gnb_config.c index bad037168f..9710dd1814 100644 --- a/openair2/GNB_APP/gnb_config.c +++ b/openair2/GNB_APP/gnb_config.c @@ -1510,7 +1510,7 @@ void NRRCConfig(void) { config_get( GNBSParams,sizeof(GNBSParams)/sizeof(paramdef_t),NULL); RC.nb_nr_inst = GNBSParams[GNB_ACTIVE_GNBS_IDX].numelt; - // Get num MACRLC instances + // Get num MACRLC instances config_getlist( &MACRLCParamList,NULL,0, NULL); RC.nb_nr_macrlc_inst = MACRLCParamList.numelt; // Get num L1 instances diff --git a/openair2/LAYER2/NR_MAC_UE/nr_ue_scheduler.c b/openair2/LAYER2/NR_MAC_UE/nr_ue_scheduler.c index 5284f7fc53..22a13d223b 100644 --- a/openair2/LAYER2/NR_MAC_UE/nr_ue_scheduler.c +++ b/openair2/LAYER2/NR_MAC_UE/nr_ue_scheduler.c @@ -73,6 +73,8 @@ void fill_ul_config(fapi_nr_ul_config_request_t *ul_config, frame_t frame_tx, in memset(ul_config->ul_config_list, 0, sizeof(ul_config->ul_config_list)); } ul_config->ul_config_list[ul_config->number_pdus].pdu_type = pdu_type; + //ul_config->slot = slot_tx; + //ul_config->sfn = frame_tx; ul_config->slot = slot_tx; ul_config->sfn = frame_tx; ul_config->number_pdus++; @@ -971,6 +973,8 @@ NR_UE_L2_STATE_t nr_ue_scheduler(nr_downlink_indication_t *dl_info, nr_uplink_in uint8_t ulsch_input_buffer_array[NFAPI_MAX_NUM_UL_PDU][MAX_ULSCH_PAYLOAD_BYTES]; nr_scheduled_response_t scheduled_response; fapi_nr_tx_request_t tx_req; + //tx_req.slot = slot_tx; + //tx_req.sfn = frame_tx; tx_req.slot = slot_tx; tx_req.sfn = frame_tx; tx_req.number_of_pdus = 0; diff --git a/openair2/LAYER2/NR_MAC_gNB/gNB_scheduler.c b/openair2/LAYER2/NR_MAC_gNB/gNB_scheduler.c index 924fbf35b6..0a7a3e3399 100644 --- a/openair2/LAYER2/NR_MAC_gNB/gNB_scheduler.c +++ b/openair2/LAYER2/NR_MAC_gNB/gNB_scheduler.c @@ -272,6 +272,7 @@ bool is_xlsch_in_slot(uint64_t bitmap, sub_frame_t slot) { void gNB_dlsch_ulsch_scheduler(module_id_t module_idP, frame_t frame, sub_frame_t slot){ + //pthread_mutex_lock(&mutextest); protocol_ctxt_t ctxt={0}; PROTOCOL_CTXT_SET_BY_MODULE_ID(&ctxt, module_idP, ENB_FLAG_YES, NOT_A_RNTI, frame, slot,module_idP); diff --git a/openair2/RRC/LTE/MESSAGES/asn1_msg.c b/openair2/RRC/LTE/MESSAGES/asn1_msg.c index b1f2e6d9b3..b069591316 100644 --- a/openair2/RRC/LTE/MESSAGES/asn1_msg.c +++ b/openair2/RRC/LTE/MESSAGES/asn1_msg.c @@ -4293,7 +4293,7 @@ ssize_t do_nrMeasurementReport(uint8_t *buffer, LTE_MeasResultListEUTRA_t *measResultListEUTRA2=&measResultNeighCells->choice.measResultListEUTRA; asn1cSequenceAdd(measResultListEUTRA2->list, struct LTE_MeasResultEUTRA, measresulteutra_list); measresulteutra_list->physCellId = phy_id; - asn1cCalloc(measresulteutra_list->cgi_Info, measresult_cgi2); + //asn1cCalloc(measresulteutra_list->cgi_Info, measresult_cgi2); //measresult_cgi2->cellGlobalId= {0}; //measresult_cgi2->trackingAreaCode= {0}; struct LTE_MeasResultEUTRA__measResult* measResult= &measresulteutra_list->measResult; diff --git a/openair2/RRC/NR/nr_rrc_defs.h b/openair2/RRC/NR/nr_rrc_defs.h index e233e070fe..a92cf9861c 100644 --- a/openair2/RRC/NR/nr_rrc_defs.h +++ b/openair2/RRC/NR/nr_rrc_defs.h @@ -522,6 +522,8 @@ typedef struct gNB_RRC_INST_s { int cell_info_configured; pthread_mutex_t cell_info_mutex; + char *uecap_file; + // security configuration (preferred algorithms) nr_security_configuration_t security; } gNB_RRC_INST; diff --git a/openair2/RRC/NR/rrc_gNB.c b/openair2/RRC/NR/rrc_gNB.c index 9ce3eefce8..2c2020412d 100755 --- a/openair2/RRC/NR/rrc_gNB.c +++ b/openair2/RRC/NR/rrc_gNB.c @@ -202,56 +202,12 @@ static void init_NR_SI(gNB_RRC_INST *rrc, gNB_RrcConfigurationReq *configuration pthread_mutex_unlock(&rrc->cell_info_mutex); if (get_softmodem_params()->phy_test > 0 || get_softmodem_params()->do_ra > 0) { - // This is for phytest only, emulate first X2 message if uecap.raw file is present - FILE *fd; - fd = fopen("uecap.raw","r"); - - if (fd != NULL) { - char buffer[4096]; - int msg_len=fread(buffer,1,4096,fd); - LOG_I(RRC,"Read in %d bytes for uecap\n",msg_len); - LTE_UL_DCCH_Message_t *LTE_UL_DCCH_Message; - asn_dec_rval_t dec_rval = uper_decode_complete( NULL, - &asn_DEF_LTE_UL_DCCH_Message, - (void **)<E_UL_DCCH_Message, - (uint8_t *)buffer, - msg_len); - - if ((dec_rval.code != RC_OK) && (dec_rval.consumed == 0)) { - AssertFatal(1==0,"NR_UL_DCCH_MESSAGE decode error\n"); - // free the memory - SEQUENCE_free( &asn_DEF_LTE_UL_DCCH_Message, LTE_UL_DCCH_Message, 1 ); - return; - } - - fclose(fd); - xer_fprint(stdout,&asn_DEF_LTE_UL_DCCH_Message, LTE_UL_DCCH_Message); - // recreate enough of X2 EN-DC Container - AssertFatal(LTE_UL_DCCH_Message->message.choice.c1.present == LTE_UL_DCCH_MessageType__c1_PR_ueCapabilityInformation, - "ueCapabilityInformation not present\n"); - NR_CG_ConfigInfo_t *CG_ConfigInfo = calloc(1,sizeof(*CG_ConfigInfo)); - CG_ConfigInfo->criticalExtensions.present = NR_CG_ConfigInfo__criticalExtensions_PR_c1; - CG_ConfigInfo->criticalExtensions.choice.c1 = calloc(1,sizeof(*CG_ConfigInfo->criticalExtensions.choice.c1)); - CG_ConfigInfo->criticalExtensions.choice.c1->present = NR_CG_ConfigInfo__criticalExtensions__c1_PR_cg_ConfigInfo; - CG_ConfigInfo->criticalExtensions.choice.c1->choice.cg_ConfigInfo = calloc(1,sizeof(*CG_ConfigInfo->criticalExtensions.choice.c1->choice.cg_ConfigInfo)); - NR_CG_ConfigInfo_IEs_t *cg_ConfigInfo = CG_ConfigInfo->criticalExtensions.choice.c1->choice.cg_ConfigInfo; - cg_ConfigInfo->ue_CapabilityInfo = calloc(1,sizeof(*cg_ConfigInfo->ue_CapabilityInfo)); - asn_enc_rval_t enc_rval = uper_encode_to_buffer(&asn_DEF_LTE_UE_CapabilityRAT_ContainerList,NULL, - (void *)<E_UL_DCCH_Message->message.choice.c1.choice.ueCapabilityInformation.criticalExtensions.choice.c1.choice.ueCapabilityInformation_r8.ue_CapabilityRAT_ContainerList,buffer,4096); - AssertFatal (enc_rval.encoded > 0, "ASN1 message encoding failed (%s, %jd)!\n", - enc_rval.failed_type->name, enc_rval.encoded); - OCTET_STRING_fromBuf(cg_ConfigInfo->ue_CapabilityInfo, - (const char *)buffer, - (enc_rval.encoded+7)>>3); - parse_CG_ConfigInfo(rrc,CG_ConfigInfo,NULL); - } else { - struct rrc_gNB_ue_context_s *ue_context_p = rrc_gNB_allocate_new_UE_context(rrc); - ue_context_p->ue_context.spCellConfig = calloc(1, sizeof(struct NR_SpCellConfig)); - ue_context_p->ue_context.spCellConfig->spCellConfigDedicated = configuration->scd; - LOG_I(NR_RRC,"Adding new user (%p)\n",ue_context_p); - if (!NODE_IS_CU(RC.nrrrc[0]->node_type)) { - rrc_add_nsa_user(rrc,ue_context_p,NULL); - } + struct rrc_gNB_ue_context_s *ue_context_p = rrc_gNB_allocate_new_UE_context(rrc); + ue_context_p->ue_context.spCellConfig = calloc(1, sizeof(struct NR_SpCellConfig)); + ue_context_p->ue_context.spCellConfig->spCellConfigDedicated = configuration->scd; + LOG_I(NR_RRC,"Adding new user (%p)\n",ue_context_p); + if (!NODE_IS_CU(RC.nrrrc[0]->node_type)) { + rrc_add_nsa_user(rrc,ue_context_p,NULL); } } } diff --git a/openair2/RRC/NR/rrc_gNB_nsa.c b/openair2/RRC/NR/rrc_gNB_nsa.c index 932127b3f9..15caff0b4d 100644 --- a/openair2/RRC/NR/rrc_gNB_nsa.c +++ b/openair2/RRC/NR/rrc_gNB_nsa.c @@ -38,6 +38,7 @@ #include "openair2/LAYER2/NR_MAC_gNB/mac_proto.h" #include "openair2/RRC/LTE/rrc_eNB_GTPV1U.h" #include "executables/softmodem-common.h" +#include "executables/nr-softmodem.h" #include #include #include "UTIL/OSA/osa_defs.h" @@ -143,6 +144,30 @@ void rrc_add_nsa_user(gNB_RRC_INST *rrc,struct rrc_gNB_ue_context_s *ue_context_ unsigned char *kUPenc = NULL; unsigned char *kUPint = NULL; int i; + + // In case of phy-test and do-ra mode, read UE capabilities directly from file + if (get_softmodem_params()->phy_test == 1 || get_softmodem_params()->do_ra == 1) { + NR_UE_NR_Capability_t* UE_Capability_nr = NULL; + char UE_NR_Capability_xer[65536]; + FILE *f = NULL; + if (uecap_file) + f = fopen(uecap_file, "r"); + if(f){ + size_t size = fread(UE_NR_Capability_xer, 1, sizeof UE_NR_Capability_xer, f); + if (size == 0 || size == sizeof UE_NR_Capability_xer) + LOG_E(NR_RRC,"UE Capabilities XER file %s is too large (%ld)\n", uecap_file, size); + else { + UE_Capability_nr = CALLOC(1,sizeof(NR_UE_NR_Capability_t)); + asn_dec_rval_t dec_rval = xer_decode(0, &asn_DEF_NR_UE_NR_Capability, (void *)&UE_Capability_nr, UE_NR_Capability_xer, size); + assert(dec_rval.code == RC_OK); + xer_fprint(stdout,&asn_DEF_NR_UE_NR_Capability,(void *)UE_Capability_nr); + } + } + else + LOG_E(NR_RRC,"Could not open UE Capabilities input file. Not handling OAI UE Capabilities.\n"); + ue_context_p->ue_context.UE_Capability_nr = UE_Capability_nr; + } + // NR RRCReconfiguration AssertFatal(rrc->Nb_ue < MAX_NR_RRC_UE_CONTEXTS,"cannot add another UE\n"); ue_context_p->ue_context.reconfig = calloc(1,sizeof(NR_RRCReconfiguration_t)); diff --git a/openair2/RRC/NR_UE/main_ue.c b/openair2/RRC/NR_UE/main_ue.c index 07409c6026..5e2bc429eb 100644 --- a/openair2/RRC/NR_UE/main_ue.c +++ b/openair2/RRC/NR_UE/main_ue.c @@ -34,8 +34,8 @@ #include "rrc_proto.h" #include "common/utils/LOG/log.h" -NR_UE_RRC_INST_t* nr_l3_init_ue(char* rrc_config_path){ +NR_UE_RRC_INST_t* nr_l3_init_ue(char* uecap, char* rrc_config_path){ //LOG_I(RRC, "[MAIN] NR UE MAC initialization...\n"); - return openair_rrc_top_init_ue_nr(rrc_config_path); + return openair_rrc_top_init_ue_nr(uecap,rrc_config_path); } diff --git a/openair2/RRC/NR_UE/rrc_UE.c b/openair2/RRC/NR_UE/rrc_UE.c index 4a04192248..bc209afd02 100644 --- a/openair2/RRC/NR_UE/rrc_UE.c +++ b/openair2/RRC/NR_UE/rrc_UE.c @@ -422,7 +422,7 @@ void process_nsa_message(NR_UE_RRC_INST_t *rrc, nsa_message_t nsa_message_type, } -NR_UE_RRC_INST_t* openair_rrc_top_init_ue_nr(char* rrc_config_path){ +NR_UE_RRC_INST_t* openair_rrc_top_init_ue_nr(char* uecap_file, char* rrc_config_path){ int nr_ue; if(NB_NR_UE_INST > 0){ NR_UE_rrc_inst = (NR_UE_RRC_INST_t *)calloc(NB_NR_UE_INST , sizeof(NR_UE_RRC_INST_t)); @@ -496,6 +496,8 @@ NR_UE_RRC_INST_t* openair_rrc_top_init_ue_nr(char* rrc_config_path){ RRC_LIST_INIT(NR_UE_rrc_inst[nr_ue].CSI_ReportConfig_list, NR_maxNrofCSI_ReportConfigurations); } + NR_UE_rrc_inst->uecap_file = uecap_file; + if (get_softmodem_params()->phy_test==1 || get_softmodem_params()->do_ra==1) { // read in files for RRCReconfiguration and RBconfig FILE *fd; @@ -505,7 +507,7 @@ NR_UE_RRC_INST_t* openair_rrc_top_init_ue_nr(char* rrc_config_path){ else sprintf(filename,"reconfig.raw"); fd = fopen(filename,"r"); - char buffer[1024]; + char buffer[1024]; AssertFatal(fd, "cannot read file %s: errno %d, %s\n", filename, @@ -2634,14 +2636,18 @@ nr_rrc_ue_process_ueCapabilityEnquiry( //----------------------------------------------------------------------------- { asn_enc_rval_t enc_rval; + asn_dec_rval_t dec_rval; NR_UL_DCCH_Message_t ul_dcch_msg; NR_UE_CapabilityRAT_Container_t ue_CapabilityRAT_Container; + char UE_NR_Capability_xer[65536]; + size_t size; uint8_t buffer[200]; int i; LOG_I(NR_RRC,"[UE %d] Frame %d: Receiving from SRB1 (DL-DCCH), Processing UECapabilityEnquiry (gNB %d)\n", ctxt_pP->module_id, ctxt_pP->frame, gNB_index); + memset((void *)&ul_dcch_msg,0,sizeof(NR_UL_DCCH_Message_t)); memset((void *)&ue_CapabilityRAT_Container,0,sizeof(NR_UE_CapabilityRAT_Container_t)); ul_dcch_msg.message.present = NR_UL_DCCH_MessageType_PR_c1; @@ -2650,20 +2656,35 @@ nr_rrc_ue_process_ueCapabilityEnquiry( ul_dcch_msg.message.choice.c1->choice.ueCapabilityInformation = CALLOC(1, sizeof(struct NR_UECapabilityInformation)); ul_dcch_msg.message.choice.c1->choice.ueCapabilityInformation->rrc_TransactionIdentifier = UECapabilityEnquiry->rrc_TransactionIdentifier; ue_CapabilityRAT_Container.rat_Type = NR_RAT_Type_nr; - NR_UE_NR_Capability_t* UE_Capability_nr; - UE_Capability_nr = CALLOC(1,sizeof(NR_UE_NR_Capability_t)); - NR_BandNR_t *nr_bandnr; - nr_bandnr = CALLOC(1,sizeof(NR_BandNR_t)); - nr_bandnr->bandNR = 1; - ASN_SEQUENCE_ADD( - &UE_Capability_nr->rf_Parameters.supportedBandListNR.list, - nr_bandnr); + NR_UE_NR_Capability_t* UE_Capability_nr = NULL; + + char *file_path = NR_UE_rrc_inst[ctxt_pP->module_id].uecap_file; + + FILE *f = NULL; + if (file_path) + f = fopen(file_path, "r"); + if(f){ + size = fread(UE_NR_Capability_xer, 1, sizeof UE_NR_Capability_xer, f); + if (size == 0 || size == sizeof UE_NR_Capability_xer) { + LOG_E(NR_RRC,"UE Capabilities XER file %s is too large (%ld)\n", file_path,size); + free(UE_Capability_nr); + return; + } + dec_rval = xer_decode(0, &asn_DEF_NR_UE_NR_Capability, (void *)&UE_Capability_nr, UE_NR_Capability_xer, size); + assert(dec_rval.code == RC_OK); + } + else { + UE_Capability_nr = CALLOC(1,sizeof(NR_UE_NR_Capability_t)); + NR_BandNR_t *nr_bandnr; + nr_bandnr = CALLOC(1,sizeof(NR_BandNR_t)); + nr_bandnr->bandNR = 1; + ASN_SEQUENCE_ADD(&UE_Capability_nr->rf_Parameters.supportedBandListNR.list, + nr_bandnr); + } OAI_NR_UECapability_t *UECap; UECap = CALLOC(1,sizeof(OAI_NR_UECapability_t)); UECap->UE_NR_Capability = UE_Capability_nr; - if ( LOG_DEBUGFLAG(DEBUG_ASN1) ) { - xer_fprint(stdout,&asn_DEF_NR_UE_NR_Capability,(void *)UE_Capability_nr); - } + xer_fprint(stdout,&asn_DEF_NR_UE_NR_Capability,(void *)UE_Capability_nr); enc_rval = uper_encode_to_buffer(&asn_DEF_NR_UE_NR_Capability, NULL, diff --git a/openair2/RRC/NR_UE/rrc_defs.h b/openair2/RRC/NR_UE/rrc_defs.h index 0da6748b32..bf2c99c219 100644 --- a/openair2/RRC/NR_UE/rrc_defs.h +++ b/openair2/RRC/NR_UE/rrc_defs.h @@ -70,7 +70,7 @@ typedef enum { nr_RadioBearerConfigX_r15=1 } nsa_message_t; -#define MAX_UE_NR_CAPABILITY_SIZE 255 +#define MAX_UE_NR_CAPABILITY_SIZE 2048 typedef struct OAI_NR_UECapability_s { uint8_t sdu[MAX_UE_NR_CAPABILITY_SIZE]; uint8_t sdu_size; @@ -120,13 +120,15 @@ typedef struct NR_UE_RRC_INST_s { NR_DRB_ToAddMod_t *DRB_config[NB_CNX_UE][8]; rb_id_t *defaultDRB; // remember the ID of the default DRB - NR_SRB_INFO Srb0[NB_SIG_CNX_UE]; + char *uecap_file; + + NR_SRB_INFO Srb0[NB_SIG_CNX_UE]; NR_SRB_INFO_TABLE_ENTRY Srb1[NB_CNX_UE]; NR_SRB_INFO_TABLE_ENTRY Srb2[NB_CNX_UE]; uint8_t MBMS_flag; OAI_NR_UECapability_t *UECap; - uint8_t *UECapability; + uint8_t *UECapability; uint8_t UECapability_size; RA_trigger_t ra_trigger; diff --git a/openair2/RRC/NR_UE/rrc_proto.h b/openair2/RRC/NR_UE/rrc_proto.h index c9b3bf86a1..62d9167251 100644 --- a/openair2/RRC/NR_UE/rrc_proto.h +++ b/openair2/RRC/NR_UE/rrc_proto.h @@ -56,14 +56,14 @@ extern queue_t nr_wait_ul_tti_req_queue; // main_rrc.c // /**\brief Layer 3 initialization*/ -NR_UE_RRC_INST_t* nr_l3_init_ue(char*); +NR_UE_RRC_INST_t* nr_l3_init_ue(char*,char*); // // UE_rrc.c // /**\brief Initial the top level RRC structure instance*/ -NR_UE_RRC_INST_t* openair_rrc_top_init_ue_nr(char*); +NR_UE_RRC_INST_t* openair_rrc_top_init_ue_nr(char*,char*); diff --git a/targets/PROJECTS/GENERIC-NR-5GC/CONF/du_gnb.conf b/targets/PROJECTS/GENERIC-NR-5GC/CONF/du_gnb.conf index 417e937edf..01050b0d00 100644 --- a/targets/PROJECTS/GENERIC-NR-5GC/CONF/du_gnb.conf +++ b/targets/PROJECTS/GENERIC-NR-5GC/CONF/du_gnb.conf @@ -213,7 +213,7 @@ L1s = ( { num_cc = 1; tr_n_preference = "local_mac"; - pusch_proc_threads = 2; + pusch_proc_threads = 8; } ); diff --git a/targets/PROJECTS/GENERIC-NR-5GC/CONF/uecap.xml b/targets/PROJECTS/GENERIC-NR-5GC/CONF/uecap.xml new file mode 100644 index 0000000000..baca6649cb --- /dev/null +++ b/targets/PROJECTS/GENERIC-NR-5GC/CONF/uecap.xml @@ -0,0 +1,862 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 11 + + + + + 01 + + + + + + + + + 8 + 64 + + 4 + 32 + + + 2 + 2 + 0 + 2 + 2 + + 0 + 4 + + + + + + + + + + + + + + + + + + + + 78 + + + + + + + + + + 2 + 8 + + + + + + + + + + + + + + + + + + + 8 + 64 + + + + 8 + 32 + + + + 4 + 64 + + + + 2 + 64 + + + + 4 + + + + + 8 + 64 + + 4 + 32 + + + 2 + 2 + 0 + 2 + 2 + + 0 + 4 + + + 2 + 1 + 8 + 16 + + + + + + + + + + 0000000000 + + + 0001011111 + + + 0000000000 + + + + + + + 0000000000 + + + 0001011111 + + + 0000000000 + + + + + + + + + + + 1000000000000000 + + + + + + + 1000000000000000 + + + + + + + + + + + 78 + + + + + 0 + + + + + + 78 + + + + + + + + + + + + + + + 8 + 64 + + 8 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 1 + + + + + + 2 + + + + + + 3 + + + + + + 4 + + + + + + 5 + + + + + + 6 + + + + + + 7 + + + + + + 8 + + + + + + 9 + + + + + + 10 + + + + + + 11 + + + + + + 12 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 1 + + + + 6 + + 6 + + 2 + + + + + + 2 + + + + 6 + + 6 + + 2 + + + + + + 3 + + + + 6 + + 6 + + 2 + + + + + + 4 + + + + 6 + + 6 + + 2 + + + + + + 5 + + + + 6 + + 6 + + 2 + + + + + + 6 + + + + 6 + + 6 + + 2 + + + + + + 7 + + + + 6 + + 6 + + 2 + + + + + + 8 + + + + 6 + + 6 + + 2 + + + + + + 9 + + + + 6 + + 6 + + 2 + + + + + + 10 + + + + 6 + + 6 + + 2 + + + + + + 11 + + + + 6 + + 6 + + 2 + + + + + + 12 + + + + 6 + + 6 + + 2 + + + + + + 11 + + + + 6 + + 6 + + 2 + + + + + + + + + + + + + 1 + + + + + + + + + + + + 1 + + + + + + + + + + + 1 + + + + + + + + + + + 1 + + + + + + + + + + + 1 + + + + + + + + + + + 1 + + + + + + + + + + + 1 + + + + + + + + + + + 1 + + + + + + + + + + + 1 + + + + + + + + + + + 1 + + + + + + + + + + + + 1 + + + + + + + + + + + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 2 + 2 + + + + + + + + + 7 + 38 + + + + + + + + +