diff --git a/cmake_targets/autotests/README.txt b/cmake_targets/autotests/README.txt index a370ae573d..7c3ae65070 100644 --- a/cmake_targets/autotests/README.txt +++ b/cmake_targets/autotests/README.txt @@ -98,43 +98,54 @@ Obj.# Case# Test# Description 01 55 lte-softmodem tests with USRP B210 RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX, 2TX/2RX -01 55 00 Band 7 FDD 5MHz UL Throughput for 60 sec for 1TX/1RX -01 55 01 Band 7 FDD 10MHz UL Throughput for 60 sec for 1TX/1RX -01 55 02 Band 7 FDD 20MHz UL Throughput for 60 sec for 1TX/1RX -01 55 03 Band 7 FDD 5MHz DL Throughput for 60 sec for 1TX/1RX -01 55 04 Band 7 FDD 10MHz DL Throughput for 60 sec for 1TX/1RX -01 55 05 Band 7 FDD 20MHz DL Throughput for 60 sec for 1TX/1RX -01 55 06 Band 7 FDD 5MHz UL Throughput for 60 sec for 2TX/2RX -01 55 07 Band 7 FDD 10MHz UL Throughput for 60 sec for 2TX/2RX -01 55 08 Band 7 FDD 20MHz UL Throughput for 60 sec for 2TX/2RX -01 55 09 Band 7 FDD 5MHz DL Throughput for 60 sec for 2TX/2RX -01 55 10 Band 7 FDD 10MHz DL Throughput for 60 sec for 2TX/2RX -01 55 11 Band 7 FDD 20MHz DL Throughput for 60 sec for 2TX/2RX +01 55 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX +01 55 01 Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX +01 55 02 Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX +01 55 03 Band 7 FDD 5MHz DL Throughput for 300 sec for 1TX/1RX +01 55 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX +01 55 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX +01 55 06 Band 7 FDD 5MHz UL Throughput for 300 sec for 2TX/2RX +01 55 07 Band 7 FDD 10MHz UL Throughput for 300 sec for 2TX/2RX +01 55 08 Band 7 FDD 20MHz UL Throughput for 300 sec for 2TX/2RX +01 55 09 Band 7 FDD 5MHz DL Throughput for 300 sec for 2TX/2RX +01 55 10 Band 7 FDD 10MHz DL Throughput for 300 sec for 2TX/2RX +01 55 11 Band 7 FDD 20MHz DL Throughput for 300 sec for 2TX/2RX 01 56 lte-softmodem tests with USRP B210 RF as eNB and OAI EPC (eNB and EPC are on same machines) w/ Bandrich COTS UE - +01 56 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX +01 56 01 Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX +01 56 02 Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX +01 56 03 Band 7 FDD 5MHz DL Throughput for 300 sec for 1TX/1RX +01 56 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX +01 56 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX 01 57 lte-softmodem tests with USRP B210 RF as eNB and OAI EPC (eNB and EPC are on different machines) w/ Bandrich COTS UE +01 57 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX +01 57 01 Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX +01 57 02 Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX +01 57 03 Band 7 FDD 5MHz DL Throughput for 300 sec for 1TX/1RX +01 57 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX +01 57 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX 01 58 lte-softmodem tests with USRP X310 RF as eNB and ALU EPC w/ Bandrich COTS UE for `TX/1RX, 2TX/2RX -01 58 00 Band 7 FDD 5MHz UL Throughput for 60 sec for 1TX/1RX -01 58 01 Band 7 FDD 10MHz UL Throughput for 60 sec for 1TX/1RX -01 58 02 Band 7 FDD 20MHz UL Throughput for 60 sec for 1TX/1RX -01 58 03 Band 7 FDD 5MHz DL Throughput for 60 sec for 1TX/1RX -01 58 04 Band 7 FDD 10MHz DL Throughput for 60 sec for 1TX/1RX -01 58 05 Band 7 FDD 20MHz DL Throughput for 60 sec for 1TX/1RX +01 58 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX +01 58 01 Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX +01 58 02 Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX +01 58 03 Band 7 FDD 5MHz DL Throughput for 300 sec for 1TX/1RX +01 58 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX +01 58 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX 01 59 lte-softmodem tests with USRP X310 RF as eNB and OAI EPC (eNB and EPC are on same machines) w/ Bandrich COTS UE 01 61 lte-softmodem tests with USRP X310 RF as eNB and OAI EPC (eNB and EPC are on different machines) w/ Bandrich COTS UE 01 61 lte-softmodem tests with EXMIMO RF as eNB and ALU EPC w/ Bandrich COTS UE for `TX/1RX, 2TX/2RX -01 61 00 Band 7 FDD 5MHz UL Throughput for 60 sec for 1TX/1RX -01 61 01 Band 7 FDD 10MHz UL Throughput for 60 sec for 1TX/1RX -01 61 02 Band 7 FDD 20MHz UL Throughput for 60 sec for 1TX/1RX -01 61 03 Band 7 FDD 5MHz DL Throughput for 60 sec for 1TX/1RX -01 61 04 Band 7 FDD 10MHz DL Throughput for 60 sec for 1TX/1RX -01 61 05 Band 7 FDD 20MHz DL Throughput for 60 sec for 1TX/1RX +01 61 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX +01 61 01 Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX +01 61 02 Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX +01 61 03 Band 7 FDD 5MHz DL Throughput for 300 sec for 1TX/1RX +01 61 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX +01 61 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX 01 62 lte-softmodem tests with EXMIMO RF as eNB and OAI EPC (eNB and EPC are on same machines) w/ Bandrich COTS UE 01 63 lte-softmodem tests with EXMIMO RF as eNB and OAI EPC (eNB and EPC are on different machines) w/ Bandrich COTS UE diff --git a/cmake_targets/autotests/core.py b/cmake_targets/autotests/core.py index 18f89ecfce..5b1f39a85b 100644 --- a/cmake_targets/autotests/core.py +++ b/cmake_targets/autotests/core.py @@ -192,6 +192,7 @@ class core: if index == 0 or index == 1 : return self.oai.before else: + print "command = " + command + "rsp1 = " + rsp1 + " rsp2 = " + rsp2 + " index = " + str(index) raise log.err(self.failed(command, rsp1 + ' or ' + rsp2,debug)) @@ -240,7 +241,7 @@ class core: if (rsp.find(expect) == -1): return 'OK' else: - print "command = " + cmd + "expect = " + expect + "rsp = " + rsp + print "command = " + command + "expect = " + expect + "rsp = " + rsp raise log.err(self.failed(command, expect,debug)) diff --git a/cmake_targets/autotests/run_exec_lte-softmodem_tests.py b/cmake_targets/autotests/run_exec_lte-softmodem_tests.py index e287a31353..ed4a19f4dc 100755 --- a/cmake_targets/autotests/run_exec_lte-softmodem_tests.py +++ b/cmake_targets/autotests/run_exec_lte-softmodem_tests.py @@ -258,17 +258,17 @@ def finalize_deploy_script (timeout_cmd, terminate_missing_procs='True'): # \param logdirRepo directory of remote repository # \param python_script python script location def update_config_file(oai, config_string, logdirRepo, python_script): + cmd="" if config_string : stringArray = config_string.splitlines() - cmd="" #python_script = '$OPENAIR_DIR/targets/autotests/tools/search_repl.py' for string in stringArray: #split the string based on space now string1=string.split() cmd = cmd + 'python ' + python_script + ' ' + logdirRepo+'/'+string1[0] + ' ' + string1[1] + ' '+ string1[2] + '\n' #cmd = cmd + 'perl -p -i -e \'s/'+ string1[1] + '\\s*=\\s*"\\S*"\\s*/' + string1[1] + ' = "' + string1[2] +'"' + '/g\' ' + logdirRepo + '/' +string1[0] + '\n' - return cmd - #result = oai.send_recv(cmd) + return cmd + #result = oai.send_recv(cmd) # \brief thread safe sshsession wrapper due to occasional connection issues with ssh # \param machine name of machine @@ -323,7 +323,7 @@ def cleanOldPrograms(oai, programList, CleanUpAluLteBox, ExmimoRfStop): #result = oai.send_recv(cmd) #print result result = oai.send_expect_false(cmd, 'Match found', False) - print result + print "Looking for old programs..." + result res=oai.send_recv(CleanUpAluLteBox, True) res = oai.send_recv(ExmimoRfStop, False) @@ -359,7 +359,7 @@ class oaiThread (threading.Thread): except Exception, e: error='' error = error + ' In class oaiThread, function: ' + sys._getframe().f_code.co_name + ': *** Caught exception: ' + str(e.__class__) + " : " + str( e) - error = error + '\n threadID = ' + str(self.threadID) + '\n threadname = ' + self.threadname + '\n timeout = ' + self.timeout + '\n machine = ' + self.machine + '\n cmd = ' + self.cmd + '\n timeout = ' + str(self.timeout) + '\n username = ' + self.username + '\n' + error = error + '\n threadID = ' + str(self.threadID) + '\n threadname = ' + self.threadname + '\n timeout = ' + str(self.timeout) + '\n machine = ' + self.machine + '\n cmd = ' + self.cmd + '\n timeout = ' + str(self.timeout) + '\n username = ' + self.username + '\n' error = error + traceback.format_exc() print error @@ -548,7 +548,7 @@ def wait_testcaseclass_generic_threads(threadListGeneric, timeout = 1): # \param CleanupAluLteBox string that contains commands to stop ALU Bell Labs LTEBox (specified in test_case_list.xml) # \param ExmimoRfStop command to stop EXMIMO Card # \param nruns_lte-softmodem global parameter to override number of runs (nruns) within the test case -def handle_testcaseclass_softmodem (testcase, oldprogramList, logdirOAI5GRepo , logdirOpenaircnRepo, MachineList, user, password, CleanUpAluLteBox, ExmimoRfStop, nruns_lte_softmodem): +def handle_testcaseclass_softmodem (testcase, oldprogramList, logdirOAI5GRepo , logdirOpenaircnRepo, MachineList, user, password, CleanUpAluLteBox, ExmimoRfStop, nruns_lte_softmodem, timeout_cmd): #We ignore the password sent to this function for secuirity reasons for password present in log files #It is recommended to add a line in /etc/sudoers that looks something like below. The line below will run sudo without password prompt # your_user_name ALL=(ALL:ALL) NOPASSWD: ALL @@ -558,7 +558,8 @@ def handle_testcaseclass_softmodem (testcase, oldprogramList, logdirOAI5GRepo , #user = getpass.getuser() testcasename = testcase.get('id') testcaseclass = testcase.findtext('class',default='') - timeout_cmd = testcase.findtext('TimeOut_cmd',default='') + if timeout_cmd == '': + timeout_cmd = testcase.findtext('TimeOut_cmd',default='') timeout_cmd = int(float(timeout_cmd)) #Timeout_thread is more than that of cmd to have room for compilation time, etc timeout_thread = timeout_cmd + 300 @@ -580,6 +581,8 @@ def handle_testcaseclass_softmodem (testcase, oldprogramList, logdirOAI5GRepo , eNB_traffic_exec_args = testcase.findtext('eNB_traffic_exec_args',default='') eNB_terminate_missing_procs = testcase.findtext('eNB_terminate_missing_procs',default='True') eNB_search_expr_true = testcase.findtext('eNB_search_expr_true','') + if re.compile('\w+').match(eNB_search_expr_true) != None: + eNB_search_expr_true = eNB_search_expr_true + ' duration=' + str(timeout_cmd-90) + 's' UEMachine = testcase.findtext('UE',default='') UE_config_file = testcase.findtext('UE_config_file',default='') @@ -594,6 +597,8 @@ def handle_testcaseclass_softmodem (testcase, oldprogramList, logdirOAI5GRepo , UE_terminate_missing_procs = testcase.findtext('UE_terminate_missing_procs',default='True') UE_search_expr_true = testcase.findtext('UE_search_expr_true','') UE_stop_script = testcase.findtext('UE_stop_script','') + if re.compile('\w+').match(UE_search_expr_true) != None: + UE_search_expr_true = UE_search_expr_true + ' duration=' + str(timeout_cmd-90) + 's' EPCMachine = testcase.findtext('EPC',default='') EPC_config_file = testcase.findtext('EPC_config_file',default='') @@ -612,6 +617,8 @@ def handle_testcaseclass_softmodem (testcase, oldprogramList, logdirOAI5GRepo , EPC_traffic_exec_args = testcase.findtext('EPC_traffic_exec_args',default='') EPC_terminate_missing_procs = testcase.findtext('EPC_terminate_missing_procs',default='True') EPC_search_expr_true = testcase.findtext('EPC_search_expr_true','') + if re.compile('\w+').match(EPC_search_expr_true) != None: + EPC_search_expr_true = EPC_search_expr_true + ' duration=' + str(timeout_cmd-90) + 's' index_eNBMachine = MachineList.index(eNBMachine) index_UEMachine = MachineList.index(UEMachine) @@ -680,6 +687,10 @@ def handle_testcaseclass_softmodem (testcase, oldprogramList, logdirOAI5GRepo , logfile_task_eNB_out = logdir_eNB + '/eNB_task_out' + '_' + str(run) + '_.log' logfile_task_eNB = logdir_local_testcase + '/eNB_task' + '_' + str(run) + '_.log' logfile_local_traffic_eNB_out = logdir_local_testcase + '/eNB_traffic' + '_' + str(run) + '_.log' + logfile_tshark_eNB = logdir_eNB + '/eNB_tshark' + '_' + str(run) + '_.log' + logfile_pcap_eNB = logdir_eNB + '/eNB_tshark' + '_' + str(run) + '_.pcap' + logfile_pcap_zip_eNB = logdir_eNB + '/eNB_tshark' + '_' + str(run) + '_.pcap.zip' + logfile_pcap_tmp_eNB = '/tmp/' + '/eNB_tshark' + '_' + str(run) + '_.pcap' task_eNB_compile = ' ( uname -a ; date \n' task_eNB_compile = task_eNB_compile + 'cd ' + logdirOAI5GRepo + ' ; source oaienv ; source cmake_targets/tools/build_helper \n' @@ -701,9 +712,16 @@ def handle_testcaseclass_softmodem (testcase, oldprogramList, logdirOAI5GRepo , task_eNB = task_eNB + 'array_exec_pid+=($!) \n' task_eNB = task_eNB + 'echo eNB_main_exec PID = $! \n' if eNB_traffic_exec != "": - task_eNB = task_eNB + ' (date; ' + eNB_traffic_exec + ' ' + eNB_traffic_exec_args + ' ) > ' + logfile_traffic_eNB + ' 2>&1 & \n ' + cmd_traffic = eNB_traffic_exec + ' ' + eNB_traffic_exec_args + if cmd_traffic.find('-c') >= 0: + cmd_traffic = cmd_traffic + ' -t ' + str(timeout_cmd - 60) + task_eNB = task_eNB + ' (date; ' + cmd_traffic + ' ) > ' + logfile_traffic_eNB + ' 2>&1 & \n' task_eNB = task_eNB + 'array_exec_pid+=($!) \n' task_eNB = task_eNB + 'echo eNB_traffic_exec PID = $! \n' + + task_eNB = task_eNB + ' (date; sudo rm -f ' + logfile_pcap_tmp_eNB + ' ; sudo -E tshark -i any -s 65535 -a duration:' + str(timeout_cmd-10)+ ' -w ' + logfile_pcap_tmp_eNB+ ' ; sudo -E chown ' + user + ' ' + logfile_pcap_tmp_eNB + ' ; zip -j -9 ' + logfile_pcap_zip_eNB + ' ' + logfile_pcap_tmp_eNB + ' ) > ' + logfile_tshark_eNB + ' 2>&1 & \n ' + task_eNB = task_eNB + 'array_exec_pid+=($!) \n' + task_eNB = task_eNB + 'echo eNB_tshark_exec PID = $! \n' #terminate the eNB test case after timeout_cmd seconds task_eNB = task_eNB + finalize_deploy_script (timeout_cmd, eNB_terminate_missing_procs) + ' \n' #task_eNB = task_eNB + 'sleep ' + str(timeout_cmd) + ' \n' @@ -747,7 +765,10 @@ def handle_testcaseclass_softmodem (testcase, oldprogramList, logdirOAI5GRepo , task_UE = task_UE + 'array_exec_pid+=($!) \n' task_UE = task_UE + 'echo UE_main_exec PID = $! \n' if UE_traffic_exec != "": - task_UE = task_UE + ' ( date; ' + UE_traffic_exec + ' ' + UE_traffic_exec_args + ' ) >' + logfile_traffic_UE + ' 2>&1 & \n' + cmd_traffic = UE_traffic_exec + ' ' + UE_traffic_exec_args + if cmd_traffic.find('-c') >= 0: + cmd_traffic = cmd_traffic + ' -t ' + str(timeout_cmd - 60) + task_UE = task_UE + ' ( date; ' + cmd_traffic + ' ) >' + logfile_traffic_UE + ' 2>&1 & \n' task_UE = task_UE + 'array_exec_pid+=($!) \n' task_UE = task_UE + 'echo UE_traffic_exec PID = $! \n' #terminate the UE test case after timeout_cmd seconds @@ -797,7 +818,10 @@ def handle_testcaseclass_softmodem (testcase, oldprogramList, logdirOAI5GRepo , task_EPC = task_EPC + 'array_exec_pid+=($!) \n' task_EPC = task_EPC + 'echo EPC_main_exec PID = $! \n' if EPC_traffic_exec != "": - task_EPC = task_EPC + '( date; ' + EPC_traffic_exec + ' ' + EPC_traffic_exec_args + ' ) > ' + logfile_traffic_EPC + ' 2>&1 & \n' + cmd_traffic = EPC_traffic_exec + ' ' + EPC_traffic_exec_args + if cmd_traffic.find('-c') >= 0: + cmd_traffic = cmd_traffic + ' -t ' + str(timeout_cmd - 60) + task_EPC = task_EPC + '( date; ' + cmd_traffic + ' ) > ' + logfile_traffic_EPC + ' 2>&1 & \n' task_EPC = task_EPC + 'array_exec_pid+=($!) \n' task_EPC = task_EPC + 'echo EPC_traffic_exec PID = $! \n' #terminate the EPC test case after timeout_cmd seconds @@ -861,6 +885,19 @@ def handle_testcaseclass_softmodem (testcase, oldprogramList, logdirOAI5GRepo , thread_UE.start() thread_UE.join() + #Now we change the permissions of the logfiles to avoid some of them being with root permissions + cmd = 'sudo -E chown -R ' + user + ' ' + logdir_eNB + res= oai_eNB.send_recv(cmd) + print "Changing permissions of logdir <" + logdir_eNB + "> in eNB machine..." + res + + cmd = 'sudo -E chown -R ' + user + ' ' + logdir_UE + res= oai_UE.send_recv(cmd) + print "Changing permissions of logdir <" + logdir_UE + "> in UE machine..." + res + + cmd = 'sudo -E chown -R ' + user + ' ' + logdir_EPC + res= oai_EPC.send_recv(cmd) + print "Changing permissions of logdir <" + logdir_EPC + "> in EPC machine..." + res + print "Copying files from EPCMachine : " + EPCMachine + "logdir_EPC = " + logdir_EPC #ssh = SSHSession(EPCMachine , username=user, key_file=None, password=password) @@ -1019,7 +1056,8 @@ MachineListGeneric='' flag_remove_logdir=False flag_start_testcase=False nruns_lte_softmodem='' - +flag_skip_git_head_check=False +Timeout_cmd='' print "Number of arguments argc = " + str(len(sys.argv)) #for index in range(1,len(sys.argv) ): # print "argv_" + str(index) + " : " + sys.argv[index] @@ -1073,6 +1111,11 @@ while i < len (sys.argv): MachineListGeneric = MachineListGeneric.replace("\"","") MachineListGeneric = MachineListGeneric.replace("\'","") i = i +1 + elif arg == '--skip-git-head-check': + flag_skip_git_head_check=True + elif arg == '--timeout_cmd': + Timeout_cmd = sys.argv[i+1] + i = i +1 elif arg == '-h' : print "-s: This flag *MUST* be set to start the test cases" print "-r: Remove the log directory in autotests" @@ -1086,6 +1129,8 @@ while i < len (sys.argv): print "--nrun_lte_softmodem: Set the number of runs for lte-softmodem test case class" print "-MachineList : overrides the MachineList parameter in test_case_list.xml" print "-MachineListGeneric : overrides the MachineListGeneric parameter in test_case_list.xml" + print "--skip-git-head-check: skip checking of GitHead remote/local branch (only for debugging)" + print "--timeout_cmd: Override the default parameter (timeout_cmd) in test_case_list.xml. This parameter is in seconds and should be > 120" sys.exit() else : print "Unrecongnized Option: <" + arg + ">. Use -h to see valid options" @@ -1186,6 +1231,7 @@ print "GitOAI5GBranch = " + GitOAI5GRepoBranch print "GitOpenaircnRepoBranch = " + GitOpenaircnRepoBranch print "NFSResultsShare = " + NFSResultsShare print "nruns_lte_softmodem = " + nruns_lte_softmodem +print "Timeout_cmd = " + Timeout_cmd if GitOAI5GHeadVersion == '': cmd = "git show-ref --heads -s "+ GitOAI5GRepoBranch @@ -1289,7 +1335,10 @@ for oai in oai_list: cmd = cmd + 'git_head=${git_head[0]} \n' cmd = cmd + 'echo \"GitOAI5GHeadVersion_remote = $git_head\"' cmd = cmd + 'echo \"GitOAI5GHeadVersion_local = ' + GitOAI5GHeadVersion + '\" \n' - cmd = cmd + 'if [ \"$git_head\" != \"'+ GitOAI5GHeadVersion + '\" ]; then echo \"error: Git openairinterface5g head version does not match\" ; fi \n' + if flag_skip_git_head_check==True: + cmd = cmd + 'echo \"skipping GitHead check...\" \n ' + else: + cmd = cmd + 'if [ \"$git_head\" != \"'+ GitOAI5GHeadVersion + '\" ]; then echo \"error: Git openairinterface5g head version does not match\" ; fi \n' cmd = cmd + 'source oaienv' + '\n' cmd = cmd + 'cd ' + logdirOpenaircnRepo + '\n' cmd = cmd + 'git checkout ' + GitOpenaircnRepoBranch + '\n' @@ -1375,8 +1424,8 @@ for testcase in testcaseList: print "eNBMachine : " + eNBMachine + "UEMachine : " + UEMachine + "EPCMachine : " + EPCMachine + "MachineList : " + ','.join(MachineList) print "testcasename = " + testcasename + " class = " + testcaseclass threadListGlobal = wait_testcaseclass_generic_threads(threadListGlobal, Timeout_execution) - cleanOldProgramsAllMachines(oai_list, CleanUpOldProgs, CleanUpAluLteBox, ExmimoRfStop) - handle_testcaseclass_softmodem (testcase, CleanUpOldProgs, logdirOAI5GRepo, logdirOpenaircnRepo, MachineList, user, pw, CleanUpAluLteBox, ExmimoRfStop, nruns_lte_softmodem ) + #cleanOldProgramsAllMachines(oai_list, CleanUpOldProgs, CleanUpAluLteBox, ExmimoRfStop) + handle_testcaseclass_softmodem (testcase, CleanUpOldProgs, logdirOAI5GRepo, logdirOpenaircnRepo, MachineList, user, pw, CleanUpAluLteBox, ExmimoRfStop, nruns_lte_softmodem, Timeout_cmd ) elif (testcaseclass == 'compilation'): threadListGlobal = handle_testcaseclass_generic (testcasename, threadListGlobal, CleanUpOldProgs, logdirOAI5GRepo, MachineListGeneric, user, pw, CleanUpAluLteBox,Timeout_execution, ExmimoRfStop) elif (testcaseclass == 'execution'): @@ -1412,7 +1461,7 @@ cmd = ' rm -fr ' + NFSTestsResultsDir + ' ; mkdir -p ' + NFSTestsResultsDir res = oai_localhost.send_recv(cmd) print "Deleting NFSTestResults Dir..." + res -print "Copying files from GilabCI Runner Machine : " + host + "locallogdir = " + locallogdir + ", NFSTestsResultsDir = " + NFSTestsResultsDir +print "Copying files from GilabCI Runner Machine : " + host + " .locallogdir = " + locallogdir + ", NFSTestsResultsDir = " + NFSTestsResultsDir SSHSessionWrapper('localhost', user, None, pw , NFSTestsResultsDir , locallogdir, "put_all") sys.exit() diff --git a/cmake_targets/autotests/test_case_list.xml b/cmake_targets/autotests/test_case_list.xml index f9399b591a..81f8b0eb58 100644 --- a/cmake_targets/autotests/test_case_list.xml +++ b/cmake_targets/autotests/test_case_list.xml @@ -5,12 +5,12 @@ https://gitlab.eurecom.fr/oai/openairinterface5g.git https://gitlab.eurecom.fr/oai/openair-cn.git develop - feature-17-test_framework - oaisim* oaisim_nos1* lte-softmodem* lte-softmodem-nos1* mme_gw* run_epc* run_hss* hss hss_sim configure_cots_bandrich_ue* wvdial* iperf iperf_script ping + develop + oaisim* oaisim_nos1* lte-softmodem* lte-softmodem-nos1* mme_gw* run_epc* run_hss* hss hss_sim configure_cots_bandrich_ue* wvdial* iperf iperf_script ping tshark sudo -S -E /opt/ltebox/tools/stop_ltebox $OPENAIR_DIR/cmake_targets/build_oai -w EXMIMO -c; sudo -S -E $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2; dmesg|tail 36000 - 0104+ 015502 015505 015506 015507 015508 015508 015509 015510 015511 015600 015700 016102 016105 + 0104+ 015502 015505 015506 015507 015508 015508 015509 015510 015511 015602 015605 015702 015705 016102 016105 3 mozart calisson stevens nano amerique @@ -891,7 +891,7 @@ - True + False /tmp targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"4\" @@ -903,11 +903,11 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -t 330 -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2 - True + False sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue /tmp @@ -929,9 +929,9 @@ $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1 - throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec duration=300.0s + throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec - True + False USRPb210.ALU_EPC.Bandrich.5MHz.FDD.Band_7.UL.1TX.1RX 10 @@ -987,7 +987,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -t 330 -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2 @@ -1013,7 +1013,7 @@ $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1 - throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec duration=300.0s + throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec True USRPb210.ALU_EPC.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX @@ -1070,7 +1070,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -t 330 -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2 @@ -1096,7 +1096,7 @@ $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1 - throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec duration=300.0s + throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec True USRPb210.ALU_EPC.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX @@ -1157,7 +1157,7 @@ True sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue - throughput_test min=4.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec duration=60.0s + throughput_test min=4.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec /tmp @@ -1177,7 +1177,7 @@ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 - $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -t 330 -B 192.172.0.1 + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1 True @@ -1237,7 +1237,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2 - throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec duration=300.0s + throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec True sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue @@ -1260,7 +1260,7 @@ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 - $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -t 330 -B 192.172.0.1 + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1 True @@ -1320,7 +1320,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2 - throughput_test min=15.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec duration=300.0s + throughput_test min=15.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec True sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue @@ -1343,7 +1343,7 @@ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 - $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -t 330 -B 192.172.0.1 + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1 True @@ -1402,7 +1402,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue;$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -t 330 -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2 @@ -1428,7 +1428,7 @@ $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo iperf -s -i 1 -u -f m -B 192.172.0.1 - throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec duration=300.0s + throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec True USRPb210.ALU_EPC.Bandrich.5MHz.FDD.Band_7.UL.2TX.2RX @@ -1486,7 +1486,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue;$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -t 330 -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2 @@ -1512,7 +1512,7 @@ $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1 - throughput_test min=2.0Mbits/sec max=2.0Mbits/sec average=2.0Mbits/sec duration=300.0s + throughput_test min=2.0Mbits/sec max=2.0Mbits/sec average=2.0Mbits/sec True USRPb210.ALU_EPC.Bandrich.10MHz.FDD.Band_7.UL.2TX.2RX @@ -1569,7 +1569,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -t 330 -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2 @@ -1595,7 +1595,7 @@ $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1 - throughput_test min=4.0Mbits/sec max=4.0Mbits/sec average=4.0Mbits/sec duration=300.0s + throughput_test min=4.0Mbits/sec max=4.0Mbits/sec average=4.0Mbits/sec True USRPb210.ALU_EPC.Bandrich.20MHz.FDD.Band_7.UL.2TX.2RX @@ -1654,7 +1654,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2 - throughput_test min=4.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec duration=300.0s + throughput_test min=4.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec True sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue @@ -1677,7 +1677,7 @@ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 - $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -t 330 -B 192.172.0.1 + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1 True @@ -1737,7 +1737,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2 - throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec duration=300.0s + throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec True sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue @@ -1760,7 +1760,7 @@ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 - $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -t 330 -B 192.172.0.1 + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1 True @@ -1820,7 +1820,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2 - throughput_test min=15.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec duration=300.0s + throughput_test min=15.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec True sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue @@ -1843,7 +1843,7 @@ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 - $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -t 330 -B 192.172.0.1 + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1 True @@ -1852,6 +1852,1015 @@ + + lte-softmodem + + calisson + stevens + calisson + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf N_RB_DL 25 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf pdsch_referenceSignalPower -26 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mme_ip_address "ipv4=\"192.170.0.1\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0:3\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.170.0.2/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0:4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.170.1.2/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -c + sleep 15; sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ; sudo -E ifconfig eth0:3 192.170.0.2 up ; sudo -E ifconfig eth0:4 192.170.1.2 up; ifconfig + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf -W + + + + + False + + /tmp + + + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2 + + + + False + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + + /tmp + BUILD/EPC/epc.conf.in MCC \"208\" + BUILD/EPC/epc.conf.in MNC \"92\" + BUILD/EPC/epc.conf.in TAC \"1\" + BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0:1\" + BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.170.0.1/24\" + BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0:2\"; + BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.170.1.1/24\"; + BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\" + $OPENAIRCN_DIR/SCRIPTS/build_epc + -c -l + $OPENAIRCN_DIR/SCRIPTS/build_hss + -c -l + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ; sudo -E ifconfig eth1 add 192.172.0.1 + + $OPENAIRCN_DIR/SCRIPTS/run_epc + -i -r + sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1 + + throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec + + False + USRPb210.OAI_EPC_local.Bandrich.5MHz.FDD.Band_7.UL.1TX.1RX + 10 + + + + lte-softmodem + + calisson + stevens + calisson + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf N_RB_DL 50 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf pdsch_referenceSignalPower -29 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mme_ip_address "ipv4=\"192.170.0.1\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0:3\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.170.0.2/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0:4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.170.1.2/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -c + sleep 15; sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth0:3 192.170.0.2 up ; sudo -E ifconfig eth0:4 192.170.1.2 up; ifconfig + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf -W + + + + + False + + /tmp + + + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2 + + + + False + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + + /tmp + BUILD/EPC/epc.conf.in MCC \"208\" + BUILD/EPC/epc.conf.in MNC \"92\" + BUILD/EPC/epc.conf.in TAC \"1\" + BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0:1\" + BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.170.0.1/24\" + BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0:2\"; + BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.170.1.1/24\"; + BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\" + $OPENAIRCN_DIR/SCRIPTS/build_epc + -c -l + $OPENAIRCN_DIR/SCRIPTS/build_hss + -c -l + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth1 add 192.172.0.1 + + $OPENAIRCN_DIR/SCRIPTS/run_epc + -i -r + sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1 + + throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec + + False + USRPb210.OAI_EPC_local.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX + 10 + + + + lte-softmodem + + calisson + stevens + calisson + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf N_RB_DL 100 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf pdsch_referenceSignalPower -29 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mme_ip_address "ipv4=\"192.170.0.1\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0:3\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.170.0.2/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0:4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.170.1.2/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -c + sleep 15; sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth0:3 192.170.0.2 up ; sudo -E ifconfig eth0:4 192.170.1.2 up; ifconfig + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf -W + + + + + False + + /tmp + + + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2 + + + + False + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + + /tmp + BUILD/EPC/epc.conf.in MCC \"208\" + BUILD/EPC/epc.conf.in MNC \"92\" + BUILD/EPC/epc.conf.in TAC \"1\" + BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0:1\" + BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.170.0.1/24\" + BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0:2\"; + BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.170.1.1/24\"; + BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\" + $OPENAIRCN_DIR/SCRIPTS/build_epc + -c -l + $OPENAIRCN_DIR/SCRIPTS/build_hss + -c -l + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ; sudo -E ifconfig eth1 add 192.172.0.1 + + $OPENAIRCN_DIR/SCRIPTS/run_epc + -i -r + sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1 + + throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec + + False + USRPb210.OAI_EPC_local.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX + 10 + + + + lte-softmodem + + calisson + stevens + calisson + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf N_RB_DL 25 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf pdsch_referenceSignalPower -26 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mme_ip_address "ipv4=\"192.170.0.1\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0:3\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.170.0.2/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0:4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.170.1.2/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -c + sleep 15; sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth0:3 192.170.0.2 up ; sudo -E ifconfig eth0:4 192.170.1.2 up; ifconfig + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf -W + + + + + False + + /tmp + + + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2 + + throughput_test min=10.0Mbits/sec max=10.5Mbits/sec average=11.0Mbits/sec + + False + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + + /tmp + BUILD/EPC/epc.conf.in MCC \"208\" + BUILD/EPC/epc.conf.in MNC \"92\" + BUILD/EPC/epc.conf.in TAC \"1\" + BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0:1\" + BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.170.0.1/24\" + BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0:2\"; + BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.170.1.1/24\"; + BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\" + $OPENAIRCN_DIR/SCRIPTS/build_epc + -c -l + $OPENAIRCN_DIR/SCRIPTS/build_hss + -c -l + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth1 add 192.172.0.1 + + $OPENAIRCN_DIR/SCRIPTS/run_epc + -i -r + sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1 + + + + False + USRPb210.OAI_EPC_local.Bandrich.5MHz.FDD.Band_7.DL.1TX.1RX + 10 + + + + lte-softmodem + + calisson + stevens + calisson + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf N_RB_DL 50 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf pdsch_referenceSignalPower -29 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mme_ip_address "ipv4=\"192.170.0.1\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0:3\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.170.0.2/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0:4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.170.1.2/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -c + sleep 15; sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth0:3 192.170.0.2 up ; sudo -E ifconfig eth0:4 192.170.1.2 up; ifconfig + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf -W + + + + + False + + /tmp + + + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2 + + throughput_test min=20.0Mbits/sec max=21.0Mbits/sec average=22.0Mbits/sec + + False + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + + /tmp + BUILD/EPC/epc.conf.in MCC \"208\" + BUILD/EPC/epc.conf.in MNC \"92\" + BUILD/EPC/epc.conf.in TAC \"1\" + BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0:1\" + BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.170.0.1/24\" + BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0:2\"; + BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.170.1.1/24\"; + BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\" + $OPENAIRCN_DIR/SCRIPTS/build_epc + -c -l + $OPENAIRCN_DIR/SCRIPTS/build_hss + -c -l + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth1 add 192.172.0.1 + + $OPENAIRCN_DIR/SCRIPTS/run_epc + -i -r + sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1 + + + + False + USRPb210.OAI_EPC_local.Bandrich.10MHz.FDD.Band_7.DL.1TX.1RX + 10 + + + + lte-softmodem + + calisson + stevens + calisson + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf N_RB_DL 100 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf pdsch_referenceSignalPower -29 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mme_ip_address "ipv4=\"192.170.0.1\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth0:3\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.170.0.2/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_INTERFACE_NAME_FOR_S1U \"eth0:4\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.170.1.2/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -c + sleep 15; sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth0:3 192.170.0.2 up ; sudo -E ifconfig eth0:4 192.170.1.2 up; ifconfig + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf -W + + + + + False + + /tmp + + + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2 + + throughput_test min=40.0Mbits/sec max=42.0Mbits/sec average=44.0Mbits/sec + + False + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + + /tmp + BUILD/EPC/epc.conf.in MCC \"208\" + BUILD/EPC/epc.conf.in MNC \"92\" + BUILD/EPC/epc.conf.in TAC \"1\" + BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0:1\" + BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.170.0.1/24\" + BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0:2\"; + BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.170.1.1/24\"; + BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\" + $OPENAIRCN_DIR/SCRIPTS/build_epc + -c -l + $OPENAIRCN_DIR/SCRIPTS/build_hss + -c -l + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth1 add 192.172.0.1 + + $OPENAIRCN_DIR/SCRIPTS/run_epc + -i -r + sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1 + + + + False + USRPb210.OAI_EPC_local.Bandrich.20MHz.FDD.Band_7.DL.1TX.1RX + 10 + + + + lte-softmodem + + calisson + stevens + nano + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 25 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf pdsch_referenceSignalPower -26 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -c + sleep 15; sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'; ifconfig + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W + + + + + False + + /tmp + + + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2 + + + + False + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + + /tmp + BUILD/EPC/epc.conf.in MCC \"208\" + BUILD/EPC/epc.conf.in MNC \"92\" + BUILD/EPC/epc.conf.in TAC \"1\" + BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0\" + BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\" + BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0\"; + BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\"; + BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth0\" + BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\" + BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\" + $OPENAIRCN_DIR/SCRIPTS/build_epc + -c -l + $OPENAIRCN_DIR/SCRIPTS/build_hss + -c -l + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ; sudo -E ifconfig eth1 add 192.172.0.1 + + $OPENAIRCN_DIR/SCRIPTS/run_epc + -r + sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1 + + throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec + + False + USRPb210.OAI_EPC_remote.Bandrich.5MHz.FDD.Band_7.UL.1TX.1RX + 10 + + + + lte-softmodem + + calisson + stevens + nano + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf pdsch_referenceSignalPower -29 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -c + sleep 15; sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ; ifconfig + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W + + + + + False + + /tmp + + + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2 + + + + False + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + + /tmp + BUILD/EPC/epc.conf.in MCC \"208\" + BUILD/EPC/epc.conf.in MNC \"92\" + BUILD/EPC/epc.conf.in TAC \"1\" + BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0\" + BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\" + BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0\"; + BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\"; + BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth0\" + BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\" + BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\" + $OPENAIRCN_DIR/SCRIPTS/build_epc + -c -l + $OPENAIRCN_DIR/SCRIPTS/build_hss + -c -l + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth1 add 192.172.0.1 + + $OPENAIRCN_DIR/SCRIPTS/run_epc + -r + sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1 + + throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec + + False + USRPb210.OAI_EPC_remote.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX + 10 + + + + lte-softmodem + + calisson + stevens + nano + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 100 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf pdsch_referenceSignalPower -29 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -c + sleep 15; sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth0:3 192.170.0.2 up ; sudo -E ifconfig eth0:4 192.170.1.2 up; ifconfig + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W + + + + + False + + /tmp + + + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2 + + + + False + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + + /tmp + BUILD/EPC/epc.conf.in MCC \"208\" + BUILD/EPC/epc.conf.in MNC \"92\" + BUILD/EPC/epc.conf.in TAC \"1\" + BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0\" + BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\" + BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0\"; + BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\"; + BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth0\" + BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\" + BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\" + $OPENAIRCN_DIR/SCRIPTS/build_epc + -c -l + $OPENAIRCN_DIR/SCRIPTS/build_hss + -c -l + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ; sudo -E ifconfig eth1 add 192.172.0.1 + + $OPENAIRCN_DIR/SCRIPTS/run_epc + -r + sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1 + + throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec + + False + USRPb210.OAI_EPC_remote.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX + 10 + + + + lte-softmodem + + calisson + stevens + nano + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 25 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf pdsch_referenceSignalPower -26 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -c + sleep 15; sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ; ifconfig + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W + + + + + False + + /tmp + + + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2 + + throughput_test min=10.0Mbits/sec max=10.5Mbits/sec average=11.0Mbits/sec + + False + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + + /tmp + BUILD/EPC/epc.conf.in MCC \"208\" + BUILD/EPC/epc.conf.in MNC \"92\" + BUILD/EPC/epc.conf.in TAC \"1\" + BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0:1\" + BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.170.0.1/24\" + BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0:2\"; + BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.170.1.1/24\"; + BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\" + $OPENAIRCN_DIR/SCRIPTS/build_epc + -c -l + $OPENAIRCN_DIR/SCRIPTS/build_hss + -c -l + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth1 add 192.172.0.1 + + $OPENAIRCN_DIR/SCRIPTS/run_epc + -r + sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1 + + + + False + USRPb210.OAI_EPC_remote.Bandrich.5MHz.FDD.Band_7.DL.1TX.1RX + 10 + + + + lte-softmodem + + calisson + stevens + nano + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf pdsch_referenceSignalPower -29 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -c + sleep 15; sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ; ifconfig + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W + + + + + False + + /tmp + + + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2 + + throughput_test min=20.0Mbits/sec max=21.0Mbits/sec average=22.0Mbits/sec + + False + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + + /tmp + BUILD/EPC/epc.conf.in MCC \"208\" + BUILD/EPC/epc.conf.in MNC \"92\" + BUILD/EPC/epc.conf.in TAC \"1\" + BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0:1\" + BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.170.0.1/24\" + BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0:2\"; + BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.170.1.1/24\"; + BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\" + $OPENAIRCN_DIR/SCRIPTS/build_epc + -c -l + $OPENAIRCN_DIR/SCRIPTS/build_hss + -c -l + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth1 add 192.172.0.1 + + $OPENAIRCN_DIR/SCRIPTS/run_epc + -r + sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1 + + + + False + USRPb210.OAI_EPC_remote.Bandrich.10MHz.FDD.Band_7.DL.1TX.1RX + 10 + + + + lte-softmodem + + calisson + stevens + nano + 390 + /tmp + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 100 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf pdsch_referenceSignalPower -29 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1 + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth1\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\" + targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152 + $OPENAIR_DIR/cmake_targets/build_oai + --eNB -w USRP -c + sleep 15; sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ; ifconfig + + $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem + -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W + + + + + False + + /tmp + + + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' + + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue + + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2 + + throughput_test min=20.0Mbits/sec max=21.0Mbits/sec average=22.0Mbits/sec + + False + $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue + + /tmp + BUILD/EPC/epc.conf.in MCC \"208\" + BUILD/EPC/epc.conf.in MNC \"92\" + BUILD/EPC/epc.conf.in TAC \"1\" + BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0:1\" + BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.170.0.1/24\" + BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0:2\"; + BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.170.1.1/24\"; + BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" + BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" + BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\" + $OPENAIRCN_DIR/SCRIPTS/build_epc + -c -l + $OPENAIRCN_DIR/SCRIPTS/build_hss + -c -l + + sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches' ;sudo -E ifconfig eth1 add 192.172.0.1 + + $OPENAIRCN_DIR/SCRIPTS/run_epc + -r + sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss + + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1 + + + + False + USRPb210.OAI_EPC_remote.Bandrich.20MHz.FDD.Band_7.DL.1TX.1RX + 10 + + + lte-softmodem @@ -1897,7 +2906,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -t 330 -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2 @@ -1923,7 +2932,7 @@ $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1 - throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec duration=300.0s + throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec True USRPx310.ALU_EPC.Bandrich.5MHz.FDD.Band_7.UL.1TX.1RX @@ -1976,7 +2985,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -t 330 -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2 @@ -2002,7 +3011,7 @@ $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1 - throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec duration=300.0s + throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec True USRPx310.ALU_EPC.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX @@ -2054,7 +3063,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -t 330 -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2 @@ -2080,7 +3089,7 @@ $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1 - throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec duration=300.0s + throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec True USRPx310.ALU_EPC.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX @@ -2136,7 +3145,7 @@ True sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue - throughput_test min=4.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec duration=300.0s + throughput_test min=4.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec /tmp @@ -2156,7 +3165,7 @@ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 - $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -t 330 -B 192.172.0.1 + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1 True @@ -2213,7 +3222,7 @@ True sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue - throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec duration=300.0s + throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec /tmp @@ -2233,7 +3242,7 @@ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 - $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -t 330 -B 192.172.0.1 + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1 True @@ -2290,7 +3299,7 @@ True sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue - throughput_test min=15.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec duration=300.0s + throughput_test min=15.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec /tmp @@ -2310,7 +3319,7 @@ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 - $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -t 330 -B 192.172.0.1 + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1 True @@ -2366,7 +3375,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -t 330 -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2 @@ -2392,7 +3401,7 @@ $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1 - throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec duration=300.0s + throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec True EXMIMO.ALU_EPC.Bandrich.5MHz.FDD.Band_7.UL.1TX.1RX @@ -2445,7 +3454,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -t 330 -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2 @@ -2471,7 +3480,7 @@ $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1 - throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec duration=300.0s + throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec True EXMIMO.ALU_EPC.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX @@ -2523,7 +3532,7 @@ $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 45; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -t 330 -B 192.172.0.2 + $OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2 @@ -2549,7 +3558,7 @@ $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1 - throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec duration=300.0s + throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec True EXMIMO.ALU_EPC.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX @@ -2605,7 +3614,7 @@ True sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue - throughput_test min=4.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec duration=300.0s + throughput_test min=4.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec /tmp @@ -2625,7 +3634,7 @@ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 - $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -t 330 -B 192.172.0.1 + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1 True @@ -2682,7 +3691,7 @@ True sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue - throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec duration=300.0s + throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec /tmp @@ -2702,7 +3711,7 @@ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 - $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -t 330 -B 192.172.0.1 + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1 True @@ -2759,7 +3768,7 @@ True sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue - throughput_test min=15.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec duration=300.0s + throughput_test min=15.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec /tmp @@ -2779,7 +3788,7 @@ /opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 - $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -t 330 -B 192.172.0.1 + $OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1 True @@ -2788,164 +3797,6 @@ - - - lte-softmodem - - calisson - stevens - nano - 60 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - $OPENAIR_DIR/cmake_targets/build_oai - --eNB -w USRP -c - - - $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W - iperf -s - - - - True - - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" - $OPENAIR_DIR/cmake_targets/build_oai - --eNB -w USRP -c - - - $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - - ping 192.172.0.1 - - - - True - - /tmp - BUILD/EPC/epc.local.enb.conf.in MCC \"208\" - BUILD/EPC/epc.local.enb.conf.in MNC \"92\" - BUILD/EPC/epc.local.enb.conf.in TAC \"1\" - BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" - BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" - BUILD/EPC/epc.conf.in MCC \"208\" - BUILD/EPC/epc.conf.in MNC \"92\" - BUILD/EPC/epc.conf.in TAC \"1\" - BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" - BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" - BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\" - BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\" - BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\" - SCRIPTS/build_epc - -c -l - SCRIPTS/build_hss - -c - - - - /SCRIPTS/run_epc -g - - /SCRIPTS/run_hss -g - - iperf -s - - - - True - 10 - - - - - lte-softmodem - - calisson - stevens - calisson - 60 - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf N_RB_DL 50 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50 - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";" - $OPENAIR_DIR/cmake_targets/build_oai - --eNB -w USRP -c - - - $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem - -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf -W - - - - - True - - /tmp - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf tracking_area_code \"1\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_country_code \"208\" - targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf mobile_network_code \"92\" - $OPENAIR_DIR/cmake_targets/build_oai - --eNB -w USRP -c - - - $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue - - ping 192.172.0.1 - - - - True - - /tmp - BUILD/EPC/epc.local.enb.conf.in MCC \"208\" - BUILD/EPC/epc.local.enb.conf.in MNC \"92\" - BUILD/EPC/epc.local.enb.conf.in TAC \"1\" - BUILD/EPC/epc.local.enb.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" - BUILD/EPC/epc.local.enb.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.82/24\" - BUILD/EPC/epc.conf.in MCC \"208\" - BUILD/EPC/epc.conf.in MNC \"92\" - BUILD/EPC/epc.conf.in TAC \"1\" - BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth1\" - BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\" - BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\" - BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\" - BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\" - SCRIPTS/build_epc - -c -l - SCRIPTS/build_hss - -c -l - - - - SCRIPTS/run_epc -l - - SCRIPTS/run_hss - - iperf -s - - - - True - - 10 - - diff --git a/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py b/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py index e22f86e67c..99c4a04eaa 100755 --- a/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py +++ b/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py @@ -126,8 +126,8 @@ def start_ue () : break ip = IPRoute() idx = ip.link_lookup(ifname=iface)[0] - os.system ('route add 192.172.0.1 ppp0') - os.system ('ping 192.172.0.1') + os.system ('route add ' + gw + ' ppp0') + os.system ('ping ' + gw) break except Exception, e: error = ' Interface ' + iface + 'does not exist...' @@ -188,7 +188,10 @@ def find_usb_path(idVendor, idProduct): return tmpdir return '' -for arg in sys.argv[1:]: +i=1 +gw='192.172.0.1' +while i < len(sys.argv): + arg=sys.argv[i] if arg == '--start-ue' : find_open_port() print 'Using Serial port : ' + serial_port @@ -199,8 +202,17 @@ for arg in sys.argv[1:]: stop_ue() elif arg == '--reset-ue' : reset_ue() + elif arg == '-gw' : + gw = sys.argv[i+1] + i=i+1 + elif arg == '-h' : + print "--reset-ue: Reset the UE on USB Bus. Similar to unplugging and plugging the UE" + print "--stop-ue: Stop the UE. Send DETACH command" + print "--start-ue: Start the UE. Send ATTACH command" + print "-gw: Specify the default gw as sometimes the gateway/route arguments are not set properly via wvdial" else : print " Script called with wrong arguments, arg = " + arg sys.exit() + i = i +1 diff --git a/cmake_targets/autotests/tools/search_repl.py b/cmake_targets/autotests/tools/search_repl.py index 0a91945c77..d0d6c4638f 100755 --- a/cmake_targets/autotests/tools/search_repl.py +++ b/cmake_targets/autotests/tools/search_repl.py @@ -19,9 +19,11 @@ file.close() if keyword == 'mme_ip_address': - #string = (re.sub(r"mme_ip_address\s*=\s*\([^\$]+)\)\s*;\s*", r"<% tex \1 %>", t, re.M) replacement_text = keyword + ' = ( { ' + replacement_text + ' } ) ; ' string = re.sub(r"mme_ip_address\s*=\s*\(([^\$]+?)\)\s*;", replacement_text, string, re.M) +elif keyword == 'IPV4_LIST': + replacement_text = keyword + ' = ( ' + replacement_text + ' ) ; ' + string = re.sub(r"IPV4_LIST\s*=\s*\(([^\$]+?)\)\s*;", replacement_text, string, re.M) else : replacement_text = keyword + ' = ' + replacement_text + ' ; ' string = re.sub(r"%s\s*=\s*([^\$]+?)\s*;" % keyword , replacement_text, string, re.M)