added USRP X310 interface handling

targets/ARCH/COMMON/common_lib.c

@@ -52,7 +52,7 @@ int openair0_device_init(openair0_device *device, openair0_config_t *openair0_cf
   openair0_dev_init_exmimo(device, openair0_cfg);
   printf("openair0_dev_init_exmimo...\n");
 #elif OAI_USRP
-  device->type=USRP_IF;
+  device->type=USRP_B200_IF;
   openair0_dev_init_usrp(device, openair0_cfg);
   printf("openair0_dev_init_usrp ...\n");
 #elif OAI_BLADERF  

targets/ARCH/COMMON/common_lib.h

@@ -151,8 +151,10 @@ typedef enum {
   ETH_IF,
   /*!\brief device is ExpressMIMO */
   EXMIMO_IF,
-  /*!\brief device is USRP*/
+  /*!\brief device is USRP B200/B210*/
-  USRP_IF,
+  USRP_B200_IF,
+  /*!\brief device is USRP X300/X310*/
+  USRP_X300_IF,
   /*!\brief device is BLADE RF*/
   BLADERF_IF,
   /*!\brief device is NONE*/

targets/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp

@@ -171,45 +171,44 @@ static int trx_usrp_read(openair0_device *device, openair0_timestamp *ptimestamp
 #endif
 
 
-   /* 
+  if (device->type == USRP_B200_IF) {  
-  if (cc>1) {
+    if (cc>1) {
     // receive multiple channels (e.g. RF A and RF B)
-    std::vector<void *> buff_ptrs;
+      std::vector<void *> buff_ptrs;
  
-    for (int i=0;i<cc;i++) buff_ptrs.push_back(buff_tmp[i]);
+      for (int i=0;i<cc;i++) buff_ptrs.push_back(buff_tmp[i]);
-    samples_received = s->rx_stream->recv(buff_ptrs, nsamps, s->rx_md);
+      samples_received = s->rx_stream->recv(buff_ptrs, nsamps, s->rx_md);
-  } else {
+    } else {
     // receive a single channel (e.g. from connector RF A)
-    samples_received = s->rx_stream->recv(buff_tmp[0], nsamps, s->rx_md);
+      samples_received = s->rx_stream->recv(buff_tmp[0], nsamps, s->rx_md);
-    }*/
+    }
    
-  if (cc>1) {
-    // receive multiple channels (e.g. RF A and RF B)
-    std::vector<void *> buff_ptrs;
- 
-    for (int i=0;i<cc;i++) buff_ptrs.push_back(buff[i]);
-    samples_received = s->rx_stream->recv(buff_ptrs, nsamps, s->rx_md);
-  } else {
-    // receive a single channel (e.g. from connector RF A)
-    samples_received = s->rx_stream->recv(buff[0], nsamps, s->rx_md);
-  }
-
-  /*
   // bring RX data into 12 LSBs for softmodem RX
-  for (int i=0;i<cc;i++) {
+    for (int i=0;i<cc;i++) {
-    for (int j=0; j<nsamps2; j++) {      
+      for (int j=0; j<nsamps2; j++) {      
 #if defined(__x86_64__) || defined(__i386__)
 #ifdef __AVX2__
-      ((__m256i *)buff[i])[j] = _mm256_srai_epi16(buff_tmp[i][j],4);
+        ((__m256i *)buff[i])[j] = _mm256_srai_epi16(buff_tmp[i][j],4);
 #else
-      ((__m128i *)buff[i])[j] = _mm_srai_epi16(buff_tmp[i][j],4);
+        ((__m128i *)buff[i])[j] = _mm_srai_epi16(buff_tmp[i][j],4);
 #endif
 #elif defined(__arm__)
-      ((int16x8_t*)buff[i])[j] = vshrq_n_s16(buff_tmp[i][j],4);
+        ((int16x8_t*)buff[i])[j] = vshrq_n_s16(buff_tmp[i][j],4);
 #endif
+      }
     }
+  } else if (device->type == USRP_X300_IF) {
+    if (cc>1) {
+    // receive multiple channels (e.g. RF A and RF B)
+      std::vector<void *> buff_ptrs;
+ 
+      for (int i=0;i<cc;i++) buff_ptrs.push_back(buff[i]);
+      samples_received = s->rx_stream->recv(buff_ptrs, nsamps, s->rx_md);
+    } else {
+    // receive a single channel (e.g. from connector RF A)
+      samples_received = s->rx_stream->recv(buff[0], nsamps, s->rx_md);
     }
-  */
+  }
 
   if (samples_received < nsamps) {
     printf("[recv] received %d samples out of %d\n",samples_received,nsamps);
@@ -397,6 +396,9 @@ int openair0_dev_init_usrp(openair0_device* device, openair0_config_t *openair0_
     // lock mboard clocks
     s->usrp->set_clock_source("internal");
     
+    //Setting device type to USRP X300/X310 
+    device->type=USRP_X300_IF;
+
     // this is not working yet, master clock has to be set via constructor
     // set master clock rate and sample rate for tx & rx for streaming
     //s->usrp->set_master_clock_rate(usrp_master_clock);

targets/RT/USER/eNB_transport_IQ.c

@@ -172,7 +172,7 @@ void config_BBU_mod( rrh_module_t *mod_enb, uint8_t RT_flag, uint8_t NRT_flag) {
 	mod_enb->devs->openair0_cfg.tx_delay = 8;
       }
     }
-    else if (mod_enb->devs->type == USRP_IF) {
+    else if ((mod_enb->devs->type == USRP_B200_IF )||(mod_enb->devs->type == USRP_X300_IF )) {
       if ( mod_enb->devs->openair0_cfg.num_rb_dl == 100 ) {
 	mod_enb->devs->openair0_cfg.samples_per_packet = 2048;
 	mod_enb->devs->openair0_cfg.tx_forward_nsamps = 175;

targets/RT/USER/rrh_gw.c

@@ -216,7 +216,7 @@ static rrh_module_t new_module (unsigned int id) {
   LOG_I(RRH,"Setting RF device to EXMIMO\n");	   
 #elif OAI_USRP
   rrh_mod.devs=oai_dv;	
-  rrh_mod.devs->type=USRP_IF;
+  rrh_mod.devs->type=USRP_B200_IF;
   LOG_I(RRH,"Setting RF device to USRP\n");    	 
 #elif OAI_BLADERF
   rrh_mod.devs=oai_dv;	

targets/RT/USER/rrh_gw.h

@@ -51,7 +51,7 @@
 
 /*! \brief RRH supports two types of modules: eNB and UE
 	   each module is associated with an ethernet device (device of ETH_IF) 
-	   and optionally with a RF device (device type can be USRP_IF/BLADERF_IF/EXMIMO_IF/NONE_IF)
+	   and optionally with a RF device (device type can be USRP_B200/USRP_X300/BLADERF_IF/EXMIMO_IF/NONE_IF)
            UE modules will always have RF device type NONE_IF */
 typedef struct {
 /*! \brief module id */