fix compilation warnings

targets/ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.c

@@ -233,7 +233,7 @@ int trx_brf_reset_stats(openair0_device* device) {
  * \param card the hardware to use
  * \returns 0 in success 
  */
-int trx_brf_stop(int card) {
+int trx_brf_stop(openair0_device* device) {
 
   return(0);
 

targets/RT/USER/lte-softmodem.c

@@ -108,6 +108,7 @@ unsigned short config_frames[4] = {2,9,11,13};
 #   include "s1ap_eNB.h"
 #ifdef PDCP_USE_NETLINK
 #   include "SIMULATION/ETH_TRANSPORT/proto.h"
+extern int netlink_init(void);
 #endif
 # endif
 #endif
@@ -1364,7 +1365,7 @@ void init_openair0() {
 
 int main( int argc, char **argv )
 {
-  int i,aa,card=0;
+  int i,aa;
 #if defined (XFORMS)
   void *status;
 #endif

targets/RT/USER/lte-ue.c

@@ -187,6 +187,9 @@ void init_UE(int nb_inst) {
     UE = PHY_vars_UE_g[inst][0];
 
     ret = openair0_device_load(&(UE->rfdevice), &openair0_cfg[0]);
+    if (ret !=0){
+       exit_fun("Error loading device library");
+    }
     UE->rfdevice.host_type = BBU_HOST;
     //    UE->rfdevice.type      = NONE_DEV;
     error_code = pthread_create(&UE->proc.pthread_ue, &UE->proc.attr_ue, UE_thread, NULL);
@@ -1062,7 +1065,11 @@ void *UE_thread(void *arg) {
 						UE->frame_parms.samples_per_tti,
 						UE->frame_parms.nb_antennas_tx,
 						1);
-	      
+              if (txs !=  UE->frame_parms.samples_per_tti) {
+                 LOG_E(PHY,"TX : Timeout (sent %d/%d)\n",txs, UE->frame_parms.samples_per_tti);
+                 exit_fun( "problem transmitting samples" );
+              }
+
 	      VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_TRX_WRITE, 0 );
 
 	    }
@@ -1088,7 +1095,10 @@ void *UE_thread(void *arg) {
 						UE->frame_parms.samples_per_tti - rx_off_diff,
 						UE->frame_parms.nb_antennas_tx,
 						1);
-	      
+              if (txs !=  UE->frame_parms.samples_per_tti - rx_off_diff) {
+                 LOG_E(PHY,"TX : Timeout (sent %d/%d)\n",txs, UE->frame_parms.samples_per_tti-rx_off_diff);
+                 exit_fun( "problem transmitting samples" );
+              }
 	      VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_TRX_WRITE, 0 );
 
 	      // read in first symbol of next frame and adjust for timing drift
@@ -1170,6 +1180,7 @@ void *UE_thread(void *arg) {
     } // UE->is_synchronized==1
       
   } // while !oai_exit
+ return NULL;
 } // UE_thread
 
 /*

targets/SIMU/USER/oaisim.c

@@ -212,6 +212,8 @@ sigh (void *arg);
 void
 oai_shutdown (void);
 
+void reset_opp_meas_oaisim (void);
+
 void
 help (void)
 {
@@ -444,9 +446,6 @@ static Data_Flow_Unit omv_data;
 #endif //ALU
 static module_id_t UE_inst = 0;
 static module_id_t eNB_inst = 0;
-#ifdef Rel10
-static module_id_t RN_id = 0;
-#endif
 
 Packet_OTG_List_t *otg_pdcp_buffer;
 
@@ -470,13 +469,8 @@ l2l1_task (void *args_p)
   // Framing variables
   int32_t sf;
 
-#ifdef Rel10
-  relaying_type_t r_type = no_relay; // no relaying
-#endif
-  
   char fname[64], vname[64];
 
-  protocol_ctxt_t  ctxt;
   //#ifdef XFORMS
   // current status is that every UE has a DL scope for a SINGLE eNB (eNB_id=0)
   // at eNB 0, an UL scope for every UE

targets/SIMU/USER/oaisim_functions.c

@@ -1011,8 +1011,6 @@ int eNB_trx_read(openair0_device *device, openair0_timestamp *ptimestamp, void *
   int CC_id  = device->CC_id;
 
   int subframe;
-  int ready_for_new_subframe=0;
-  int subframe_eNB_mask_local;
   int sample_count=0;
 
   *ptimestamp = last_eNB_rx_timestamp[eNB_id][CC_id];
@@ -1064,8 +1062,6 @@ int UE_trx_read(openair0_device *device, openair0_timestamp *ptimestamp, void **
   int UE_id = device->Mod_id;
   int CC_id  = device->CC_id;
   int subframe;
-  int ready_for_new_subframe=0;
-  int subframe_UE_mask_local;
   int sample_count=0;
   int read_size;
 
@@ -1329,8 +1325,6 @@ void init_openair1(void)
 void init_openair2(void)
 {
 #ifdef OPENAIR2
-  module_id_t enb_id;
-  module_id_t UE_id;
   int CC_id;
 //#warning "eNB index is hard coded to zero"