diff --git a/ci-scripts/xml_files/container_nsa_b200_quectel.xml b/ci-scripts/xml_files/container_nsa_b200_quectel.xml index 3cac13dad4..552a917dab 100644 --- a/ci-scripts/xml_files/container_nsa_b200_quectel.xml +++ b/ci-scripts/xml_files/container_nsa_b200_quectel.xml @@ -37,8 +37,8 @@ 000001 050000 050001 - 070000 070001 + 070000 050000 050001 010002 @@ -119,19 +119,19 @@ Iperf - iperf (DL/40Mbps/UDP)(60 sec)(single-ue profile) - -u -b 40M -t 60 + iperf (DL/30Mbps/UDP)(60 sec)(single-ue profile) + -u -b 30M -t 60 DL idefix - 3 + 5 95 single-ue Iperf - iperf (UL/2Mbps/UDP)(60 sec)(single-ue profile) - -u -b 2M -t 60 + iperf (UL/3Mbps/UDP)(60 sec)(single-ue profile) + -u -b 3M -t 60 UL idefix 1 diff --git a/ci-scripts/xml_files/fr1_nsa_quectel.xml b/ci-scripts/xml_files/fr1_nsa_quectel.xml index 5e5853ab7f..721c22a840 100644 --- a/ci-scripts/xml_files/fr1_nsa_quectel.xml +++ b/ci-scripts/xml_files/fr1_nsa_quectel.xml @@ -34,9 +34,10 @@ 050000 050001 000001 + 070003 070000 - 000001 070001 + 070002 000001 050000 050001 @@ -114,16 +115,38 @@ Iperf - iperf (DL/60Mbps/UDP)(60 sec)(single-ue profile) - -u -b 60M -t 60 + iperf (DL/30Mbps/UDP)(30 sec)(single-ue profile) + -u -b 30M -t 30 DL idefix - 3 + 5 95 single-ue + Iperf + iperf (DL/40Mbps/UDP)(30 sec)(single-ue profile) + -u -b 40M -t 30 + DL + idefix + 5 + 95 + single-ue + + + + Iperf + iperf (DL/60Mbps/UDP)(30 sec)(single-ue profile) + -u -b 60M -t 30 + DL + idefix + 5 + 95 + single-ue + + + Iperf iperf (UL/3Mbps/UDP)(60 sec)(single-ue profile) -u -b 3M -t 60 diff --git a/cmake_targets/CMakeLists.txt b/cmake_targets/CMakeLists.txt index ca21b2825e..95b5ff1a60 100644 --- a/cmake_targets/CMakeLists.txt +++ b/cmake_targets/CMakeLists.txt @@ -2774,7 +2774,6 @@ target_link_libraries (test5Gnas LIB_5GNAS_GNB CONFIG_LIB minimal_lib ) ################################################### add_executable(lte-softmodem - ${OPENAIR_TARGETS}/RT/USER/rt_wrapper.c ${OPENAIR_TARGETS}/RT/USER/lte-enb.c ${OPENAIR_TARGETS}/RT/USER/lte-ru.c ${OPENAIR_TARGETS}/RT/USER/ru_control.c @@ -2889,7 +2888,6 @@ target_link_libraries(du_test add_executable(oairu ${OPENAIR_TARGETS}/RT/USER/lte-ru.c ${OPENAIR_TARGETS}/RT/USER/ru_control.c - ${OPENAIR_TARGETS}/RT/USER/rt_wrapper.c ${OPENAIR_TARGETS}/ARCH/COMMON/common_lib.c ${OPENAIR_TARGETS}/ARCH/COMMON/record_player.c ${OPENAIR_DIR}/executables/softmodem-common.c @@ -2917,7 +2915,6 @@ target_link_libraries (oairu pthread m ${CONFIG_LIB} rt ${CMAKE_DL_LIBS} ${T_LIB ####################################### add_executable(lte-uesoftmodem - ${OPENAIR_TARGETS}/RT/USER/rt_wrapper.c ${OPENAIR_TARGETS}/RT/USER/lte-ue.c ${OPENAIR_TARGETS}/RT/USER/lte-uesoftmodem.c ${OPENAIR_DIR}/executables/softmodem-common.c diff --git a/cmake_targets/build_oai b/cmake_targets/build_oai index b427b161e5..2dc03967f6 100755 --- a/cmake_targets/build_oai +++ b/cmake_targets/build_oai @@ -707,7 +707,7 @@ function main() { # generate USIM data if [ -f $dbin/conf2uedata ]; then - install_nas_tools $conf_nvram_path $gen_nvram_path + install_nas_tools $conf_nvram_path $gen_nvram_path "$dlog/conf2uedata.txt" echo_info "Copying UE specific part to $DIR/$build_dir/build" cp -Rvf $dbin/.ue_emm.nvram0 $DIR/$build_dir/build cp -Rvf $dbin/.ue.nvram0 $DIR/$build_dir/build diff --git a/cmake_targets/install_external_packages.ubuntu20 b/cmake_targets/install_external_packages.ubuntu20 index f0314ca575..0023c8d3c8 100755 --- a/cmake_targets/install_external_packages.ubuntu20 +++ b/cmake_targets/install_external_packages.ubuntu20 @@ -452,17 +452,6 @@ install_asn1c_from_source(){ ) > "$asn1_install_log" 2>&1 } -################################################# -# 2. compile -################################################ - -install_nas_tools() { - echo_success "generate .ue_emm.nvram .ue.nvram" - ./nvram --gen -c "$1" -o "$2" - ./usim --gen -c "$1" -o "$2" -} - - ################################ # set_openair_env ############################### diff --git a/cmake_targets/nas_sim_tools/CMakeLists.txt b/cmake_targets/nas_sim_tools/CMakeLists.txt index 308c71be4c..739e55a33e 100755 --- a/cmake_targets/nas_sim_tools/CMakeLists.txt +++ b/cmake_targets/nas_sim_tools/CMakeLists.txt @@ -15,6 +15,7 @@ set(CMAKE_C_FLAGS set(OPENAIR_DIR $ENV{OPENAIR_DIR}) set(OPENAIR3_DIR $ENV{OPENAIR_DIR}/openair3) include_directories (${OPENAIR_DIR}/openair2/COMMON) +include_directories (${OPENAIR_DIR}) set(CONF2UEDATA_LIB_SRC ${OPENAIR_DIR}/openair3/NAS/TOOLS/conf_emm.c diff --git a/cmake_targets/tools/build_helper b/cmake_targets/tools/build_helper index 06f32183b7..a23d4eca9d 100755 --- a/cmake_targets/tools/build_helper +++ b/cmake_targets/tools/build_helper @@ -892,20 +892,10 @@ install_asn1c_from_source(){ ################################################ install_nas_tools() { - if [ ! -f .ue.nvram0 ]; then - echo_success "generate .ue_emm.nvram .ue.nvram" - ./nvram --gen -c $1 -o $2 - else - [ ./nvram -nt .ue.nvram0 -o ./nvram -nt .ue_emm.nvram0 ] && ./nvram --gen -c $1 -o $2 - fi - - if [ ! -f .usim.nvram0 ]; then - echo_success "generate .usim.nvram" - ./usim --gen -c $1 -o $2 - else - [ ./usim -nt .usim.nvram0 ] && ./usim --gen -c $1 -o $2 - fi - + echo_success "generate .ue_emm.nvram .ue.nvram" + ./nvram --gen -c $1 -o $2 > "$3" + echo_success "generate .usim.nvram" + ./usim --gen -c $1 -o $2 >> "$3" } diff --git a/common/utils/system.c b/common/utils/system.c index 93b13f03f2..d897063144 100644 --- a/common/utils/system.c +++ b/common/utils/system.c @@ -211,6 +211,19 @@ void start_background_system(void) { background_system_process(); } +int rt_sleep_ns (uint64_t x) +{ + struct timespec myTime; + clock_gettime(CLOCK_MONOTONIC, &myTime); + myTime.tv_sec += x/1000000000ULL; + myTime.tv_nsec = x%1000000000ULL; + if (myTime.tv_nsec>=1000000000) { + myTime.tv_nsec -= 1000000000; + myTime.tv_sec++; + } + + return clock_nanosleep(CLOCK_MONOTONIC, TIMER_ABSTIME, &myTime, NULL); +} void threadCreate(pthread_t* t, void * (*func)(void*), void * param, char* name, int affinity, int priority){ pthread_attr_t attr; @@ -260,11 +273,128 @@ void threadCreate(pthread_t* t, void * (*func)(void*), void * param, char* name, pthread_attr_destroy(&attr); } +// Legacy, pthread_create + thread_top_init() should be replaced by threadCreate +// threadCreate encapsulates the posix pthread api +void thread_top_init(char *thread_name, + int affinity, + uint64_t runtime, + uint64_t deadline, + uint64_t period) { + +#ifdef DEADLINE_SCHEDULER + struct sched_attr attr; + + unsigned int flags = 0; + + attr.size = sizeof(attr); + attr.sched_flags = 0; + attr.sched_nice = 0; + attr.sched_priority = 0; + + attr.sched_policy = SCHED_DEADLINE; + attr.sched_runtime = runtime; + attr.sched_deadline = deadline; + attr.sched_period = period; + + if (sched_setattr(0, &attr, flags) < 0 ) { + perror("[SCHED] eNB tx thread: sched_setattr failed\n"); + fprintf(stderr,"sched_setattr Error = %s",strerror(errno)); + exit(1); + } + +#else //LOW_LATENCY + int policy, s, j; + struct sched_param sparam; + char cpu_affinity[1024]; + cpu_set_t cpuset; + int settingPriority = 1; + + /* Set affinity mask to include CPUs 2 to MAX_CPUS */ + /* CPU 0 is reserved for UHD threads */ + /* CPU 1 is reserved for all RX_TX threads */ + /* Enable CPU Affinity only if number of CPUs > 2 */ + CPU_ZERO(&cpuset); + +#ifdef CPU_AFFINITY + if (affinity == 0) { + LOG_W(HW,"thread_top_init() called with affinity==0, but overruled by #ifdef CPU_AFFINITY\n"); + } + else if (get_nprocs() > 2) + { + for (j = 2; j < get_nprocs(); j++) + CPU_SET(j, &cpuset); + s = pthread_setaffinity_np(pthread_self(), sizeof(cpu_set_t), &cpuset); + if (s != 0) + { + perror( "pthread_setaffinity_np"); + exit_fun("Error setting processor affinity"); + } + } +#else //CPU_AFFINITY + if (affinity) { + LOG_W(HW,"thread_top_init() called with affinity>0, but overruled by #ifndef CPU_AFFINITY.\n"); + } +#endif //CPU_AFFINITY + + /* Check the actual affinity mask assigned to the thread */ + s = pthread_getaffinity_np(pthread_self(), sizeof(cpu_set_t), &cpuset); + if (s != 0) + { + perror( "pthread_getaffinity_np"); + exit_fun("Error getting processor affinity "); + } + memset(cpu_affinity,0,sizeof(cpu_affinity)); + for (j = 0; j < 1024; j++) + { + if (CPU_ISSET(j, &cpuset)) + { + char temp[1024]; + sprintf (temp, " CPU_%d", j); + strcat(cpu_affinity, temp); + } + } + + if (checkIfFedoraDistribution()) + if (checkIfGenericKernelOnFedora()) + if (checkIfInsideContainer()) + settingPriority = 0; + + if (settingPriority) { + memset(&sparam, 0, sizeof(sparam)); + sparam.sched_priority = sched_get_priority_max(SCHED_FIFO); + policy = SCHED_FIFO; + + s = pthread_setschedparam(pthread_self(), policy, &sparam); + if (s != 0) { + perror("pthread_setschedparam : "); + exit_fun("Error setting thread priority"); + } + + s = pthread_getschedparam(pthread_self(), &policy, &sparam); + if (s != 0) { + perror("pthread_getschedparam : "); + exit_fun("Error getting thread priority"); + } + + pthread_setname_np(pthread_self(), thread_name); + + LOG_I(HW, "[SCHED][eNB] %s started on CPU %d, sched_policy = %s , priority = %d, CPU Affinity=%s \n",thread_name,sched_getcpu(), + (policy == SCHED_FIFO) ? "SCHED_FIFO" : + (policy == SCHED_RR) ? "SCHED_RR" : + (policy == SCHED_OTHER) ? "SCHED_OTHER" : + "???", + sparam.sched_priority, cpu_affinity ); + } + +#endif //LOW_LATENCY +} + + // Block CPU C-states deep sleep -void configure_linux(void) { +void set_latency_target(void) { int ret; static int latency_target_fd=-1; - uint32_t latency_target_value=10; // in microseconds + uint32_t latency_target_value=2; // in microseconds if (latency_target_fd == -1) { if ( (latency_target_fd = open("/dev/cpu_dma_latency", O_RDWR)) != -1 ) { ret = write(latency_target_fd, &latency_target_value, sizeof(latency_target_value)); diff --git a/common/utils/system.h b/common/utils/system.h index c76fef9144..c25c2a6f1f 100644 --- a/common/utils/system.h +++ b/common/utils/system.h @@ -43,10 +43,9 @@ int background_system(char *command); void start_background_system(void); void set_latency_target(void); -void configure_linux(void); -void threadCreate(pthread_t* t, void * (*func)(void*), void * param, char* name, int affinity, int priority); - +void threadCreate(pthread_t *t, void *(*func)(void *), void *param, char *name, int affinity, int priority); + #define SCHED_OAI SCHED_RR #define OAI_PRIORITY_RT_LOW sched_get_priority_min(SCHED_OAI) #define OAI_PRIORITY_RT ((sched_get_priority_min(SCHED_OAI)+sched_get_priority_max(SCHED_OAI))/2) @@ -65,7 +64,7 @@ void thread_top_init(char *thread_name, int checkIfFedoraDistribution(void); int checkIfGenericKernelOnFedora(void); int checkIfInsideContainer(void); - +int rt_sleep_ns (uint64_t x); #ifdef __cplusplus } #endif diff --git a/common/utils/utils.c b/common/utils/utils.c index 3f32881393..16402c1057 100644 --- a/common/utils/utils.c +++ b/common/utils/utils.c @@ -7,23 +7,7 @@ #include #include "utils.h" -void *calloc_or_fail(size_t size) { - void *ptr = calloc(1, size); - if (ptr == NULL) { - fprintf(stderr, "[UE] Failed to calloc %zu bytes", size); - exit(EXIT_FAILURE); - } - return ptr; -} -void *malloc_or_fail(size_t size) { - void *ptr = malloc(size); - if (ptr == NULL) { - fprintf(stderr, "[UE] Failed to malloc %zu bytes", size); - exit(EXIT_FAILURE); - } - return ptr; -} const char *hexdump(const void *data, size_t data_len, char *out, size_t out_len) { diff --git a/common/utils/utils.h b/common/utils/utils.h index d4337e71a6..5963ae0c8e 100644 --- a/common/utils/utils.h +++ b/common/utils/utils.h @@ -1,15 +1,112 @@ #ifndef _UTILS_H #define _UTILS_H -#include -#include + #ifdef __cplusplus extern "C" { #endif +#include +#include +#include +#include +#include +#include + +#ifdef MALLOC_TRACE +#define malloc myMalloc +#endif + #define sizeofArray(a) (sizeof(a)/sizeof(*(a))) -void *calloc_or_fail(size_t size); -void *malloc_or_fail(size_t size); + +#define cmax(a,b) ((a>b) ? (a) : (b)) +#define cmax3(a,b,c) ((cmax(a,b)>c) ? (cmax(a,b)) : (c)) +#define cmin(a,b) ((a extern volatile int oai_exit; @@ -1335,24 +1336,22 @@ void *ru_thread( void *param ) { while (!oai_exit) { - // these are local subframe/frame counters to check that we are in synch with the fronthaul timing. - // They are set on the first rx/tx in the underly FH routines. - slot_start = timespec_add(slot_start,slot_duration); - struct timespec curr_time; - clock_gettime(CLOCK_MONOTONIC, &curr_time); - - struct timespec sleep_time; - - if((slot_start.tv_sec > curr_time.tv_sec) || (slot_start.tv_sec == curr_time.tv_sec && slot_start.tv_nsec > curr_time.tv_nsec)){ - sleep_time = timespec_sub(slot_start,curr_time); + + if (NFAPI_MODE==NFAPI_MODE_VNF) { + // We should make a VNF main loop with proper tasks calls in case of VNF + slot_start = timespec_add(slot_start,slot_duration); + struct timespec curr_time; + clock_gettime(CLOCK_MONOTONIC, &curr_time); - usleep(sleep_time.tv_nsec * 1e-3); + struct timespec sleep_time; + + if((slot_start.tv_sec > curr_time.tv_sec) || (slot_start.tv_sec == curr_time.tv_sec && slot_start.tv_nsec > curr_time.tv_nsec)){ + sleep_time = timespec_sub(slot_start,curr_time); + + usleep(sleep_time.tv_nsec * 1e-3); + } } - else{//continue - } - - // clock_gettime(CLOCK_MONOTONIC, &curr_time); - //printf("sfn:%d, slot:%d, start time %d.%d slot start %d.%d \n",frame,slot,curr_time.tv_sec,curr_time.tv_nsec,slot_start.tv_sec,slot_start.tv_nsec); + if (slot==(fp->slots_per_frame-1)) { slot=0; frame++; diff --git a/executables/nr-softmodem.c b/executables/nr-softmodem.c index 62bef5a34d..2b8335167a 100644 --- a/executables/nr-softmodem.c +++ b/executables/nr-softmodem.c @@ -656,7 +656,7 @@ int main( int argc, char **argv ) { memset(&openair0_cfg[0],0,sizeof(openair0_config_t)*MAX_CARDS); memset(tx_max_power,0,sizeof(int)*MAX_NUM_CCs); logInit(); - configure_linux(); + set_latency_target(); printf("Reading in command-line options\n"); get_options (); diff --git a/executables/nr-uesoftmodem.c b/executables/nr-uesoftmodem.c index ac89bcfd4e..c718b7a15c 100644 --- a/executables/nr-uesoftmodem.c +++ b/executables/nr-uesoftmodem.c @@ -84,6 +84,7 @@ unsigned short config_frames[4] = {2,9,11,13}; #include "executables/thread-common.h" #include "nr_nas_msg_sim.h" +#include extern const char *duplex_mode[]; THREAD_STRUCT thread_struct; @@ -522,7 +523,7 @@ int main( int argc, char **argv ) { // init UE_PF_PO and mutex lock pthread_mutex_init(&ue_pf_po_mutex, NULL); memset (&UE_PF_PO[0][0], 0, sizeof(UE_PF_PO_t)*NUMBER_OF_UE_MAX*MAX_NUM_CCs); - configure_linux(); + set_latency_target(); mlockall(MCL_CURRENT | MCL_FUTURE); if(IS_SOFTMODEM_DOSCOPE) { diff --git a/executables/ocp-gnb.c b/executables/ocp-gnb.c index 7b4b1c6680..462a07c707 100644 --- a/executables/ocp-gnb.c +++ b/executables/ocp-gnb.c @@ -920,7 +920,7 @@ int main( int argc, char **argv ) { # define PACKAGE_VERSION "UNKNOWN" #endif LOG_I(HW, "Version: %s\n", PACKAGE_VERSION); - configure_linux(); + set_latency_target(); get_options (); get_common_options(SOFTMODEM_GNB_BIT ); AssertFatal(!CONFIG_ISFLAGSET(CONFIG_ABORT),"Getting configuration failed\n"); diff --git a/openair1/PHY/INIT/nr_init_ue.c b/openair1/PHY/INIT/nr_init_ue.c index d81a18a84b..ecd3dc99f7 100644 --- a/openair1/PHY/INIT/nr_init_ue.c +++ b/openair1/PHY/INIT/nr_init_ue.c @@ -32,6 +32,7 @@ #include "PHY/NR_REFSIG/ul_ref_seq_nr.h" #include "PHY/NR_REFSIG/refsig_defs_ue.h" #include "PHY/NR_REFSIG/nr_refsig.h" +#include #if 0 void phy_config_harq_ue(module_id_t Mod_id, diff --git a/openair1/PHY/LTE_TRANSPORT/dlsch_coding.c b/openair1/PHY/LTE_TRANSPORT/dlsch_coding.c index b5bcb0848d..3ccbd8ca35 100644 --- a/openair1/PHY/LTE_TRANSPORT/dlsch_coding.c +++ b/openair1/PHY/LTE_TRANSPORT/dlsch_coding.c @@ -42,7 +42,6 @@ #include "common/utils/LOG/log.h" #include "targets/RT/USER/lte-softmodem.h" #include -#include "targets/RT/USER/rt_wrapper.h" #include //#define DEBUG_DLSCH_CODING diff --git a/openair1/PHY/TOOLS/calibration_test.c b/openair1/PHY/TOOLS/calibration_test.c index 53baf83d41..5dced27060 100644 --- a/openair1/PHY/TOOLS/calibration_test.c +++ b/openair1/PHY/TOOLS/calibration_test.c @@ -42,7 +42,7 @@ int main(int argc, char **argv) { get_common_options(SOFTMODEM_GNB_BIT ); config_process_cmdline( cmdline_params,sizeof(cmdline_params)/sizeof(paramdef_t),NULL); CONFIG_CLEARRTFLAG(CONFIG_NOEXITONHELP); - configure_linux(); + set_latency_target(); int N_RB=50; diff --git a/openair1/PHY/TOOLS/lte_enb_scope.c b/openair1/PHY/TOOLS/lte_enb_scope.c index bed507feee..7fde9f244c 100644 --- a/openair1/PHY/TOOLS/lte_enb_scope.c +++ b/openair1/PHY/TOOLS/lte_enb_scope.c @@ -49,9 +49,15 @@ void reset_stats(FL_OBJECT *button, long arg) { int i,j,k; PHY_VARS_eNB *phy_vars_eNB = RC.eNB[0][0]; - for (i=0; idlsch[i][0]->Mlimit; j++) { + printf("XXX %d %d %d\n", + sizeofArray(phy_vars_eNB->UE_stats), + sizeofArray( phy_vars_eNB->UE_stats[i].dlsch_NAK), + sizeofArray( *phy_vars_eNB->UE_stats[i].dlsch_NAK) + ); + + for (i=0; iUE_stats); i++) { + for (k=0; kUE_stats[i].dlsch_NAK); k++) { //harq_processes + for (j=0; jUE_stats[i].dlsch_NAK); j++) { phy_vars_eNB->UE_stats[i].dlsch_NAK[k][j]=0; phy_vars_eNB->UE_stats[i].dlsch_ACK[k][j]=0; phy_vars_eNB->UE_stats[i].dlsch_trials[k][j]=0; @@ -67,7 +73,6 @@ void reset_stats(FL_OBJECT *button, long arg) { } } - static void *scope_thread_eNB(void *arg) { struct sched_param sched_param; int UE_id, CC_id; @@ -75,7 +80,6 @@ static void *scope_thread_eNB(void *arg) { sched_param.sched_priority = sched_get_priority_min(SCHED_FIFO)+1; sched_setscheduler(0, SCHED_FIFO,&sched_param); printf("Scope thread has priority %d\n",sched_param.sched_priority); - while (!oai_exit) { ue_cnt=0; diff --git a/openair1/PHY/impl_defs_top.h b/openair1/PHY/impl_defs_top.h index 31b9899605..ad68bc5769 100644 --- a/openair1/PHY/impl_defs_top.h +++ b/openair1/PHY/impl_defs_top.h @@ -107,11 +107,10 @@ * @} */ +#include #include "defs_eNB.h" #include "types.h" - - /** @addtogroup _PHY_STRUCTURES_ * @{ */ @@ -315,50 +314,6 @@ typedef struct { #include "openairinterface5g_limits.h" #include "assertions.h" -#define cmax(a,b) ((a>b) ? (a) : (b)) -#define cmax3(a,b,c) ((cmax(a,b)>c) ? (cmax(a,b)) : (c)) -#define cmin(a,b) ((adlsch[k][i] = new_eNB_dlsch(Kmimo,8,Nsoft,N_RB_DL,0,&eNB->frame_parms); @@ -1247,6 +1247,17 @@ int main(int argc, char **argv) { eNB->dlsch[k][i]->rnti = n_rnti+k; } } + + for (int i=0;iulsch[i] = new_eNB_ulsch(MAX_TURBO_ITERATIONS,eNB->frame_parms.N_RB_UL, 0); + + if (!eNB->ulsch[i]) { + LOG_E(PHY,"Can't get eNB ulsch structures\n"); + exit(-1); + } + } /* allocate memory for both subframes (only one is really used * but there is now "copy_harq_proc_struct" which needs both @@ -1815,12 +1826,12 @@ int main(int argc, char **argv) { if (t_rx > 2000 ) n_rx_dropped++; - appendVarArray(table_tx, &t_tx); - appendVarArray(table_tx_ifft, &t_tx_ifft); - appendVarArray(table_rx, &t_rx ); - appendVarArray(table_rx_fft, &t_rx_fft ); - appendVarArray(table_rx_demod, &t_rx_demod ); - appendVarArray(table_rx_dec, &t_rx_dec ); + appendVarArray(&table_tx, &t_tx); + appendVarArray(&table_tx_ifft, &t_tx_ifft); + appendVarArray(&table_rx, &t_rx ); + appendVarArray(&table_rx_fft, &t_rx_fft ); + appendVarArray(&table_rx_demod, &t_rx_demod ); + appendVarArray(&table_rx_dec, &t_rx_dec ); } //trials // round_trials[0]: number of code word : goodput the protocol diff --git a/openair1/SIMULATION/LTE_PHY/dummy_functions.c b/openair1/SIMULATION/LTE_PHY/dummy_functions.c index 120e4845d9..fcbab51f4b 100644 --- a/openair1/SIMULATION/LTE_PHY/dummy_functions.c +++ b/openair1/SIMULATION/LTE_PHY/dummy_functions.c @@ -86,12 +86,6 @@ int8_t get_Po_NOMINAL_PUSCH(module_id_t module_idP, uint8_t CC_id) { return(0);} int8_t get_deltaP_rampup(module_id_t module_idP, uint8_t CC_id) { return(0);} -void thread_top_init(char *thread_name, - int affinity, - uint64_t runtime, - uint64_t deadline, - uint64_t period) {} - int oai_nfapi_hi_dci0_req(nfapi_hi_dci0_request_t *hi_dci0_req) { return(0);} int oai_nfapi_tx_req(nfapi_tx_request_t *tx_req) { return(0); } diff --git a/openair1/SIMULATION/LTE_PHY/mbmssim.c b/openair1/SIMULATION/LTE_PHY/mbmssim.c index 53c15ccc89..31c3b47227 100644 --- a/openair1/SIMULATION/LTE_PHY/mbmssim.c +++ b/openair1/SIMULATION/LTE_PHY/mbmssim.c @@ -1971,12 +1971,12 @@ int main(int argc, char **argv) { if (t_rx > 2000 ) n_rx_dropped++; - appendVarArray(table_tx, &t_tx); - appendVarArray(table_tx_ifft, &t_tx_ifft); - appendVarArray(table_rx, &t_rx ); - appendVarArray(table_rx_fft, &t_rx_fft ); - appendVarArray(table_rx_demod, &t_rx_demod ); - appendVarArray(table_rx_dec, &t_rx_dec ); + appendVarArray(&table_tx, &t_tx); + appendVarArray(&table_tx_ifft, &t_tx_ifft); + appendVarArray(&table_rx, &t_rx ); + appendVarArray(&table_rx_fft, &t_rx_fft ); + appendVarArray(&table_rx_demod, &t_rx_demod ); + appendVarArray(&table_rx_dec, &t_rx_dec ); } //trials // round_trials[0]: number of code word : goodput the protocol diff --git a/openair1/SIMULATION/LTE_PHY/ulsim.c b/openair1/SIMULATION/LTE_PHY/ulsim.c index 39593a640c..1b1058535e 100644 --- a/openair1/SIMULATION/LTE_PHY/ulsim.c +++ b/openair1/SIMULATION/LTE_PHY/ulsim.c @@ -743,7 +743,7 @@ int main(int argc, char **argv) { UE2eNB->max_Doppler = maxDoppler; // NN: N_RB_UL has to be defined in ulsim - for (int k=0; kulsch[k] = new_eNB_ulsch(max_turbo_iterations,N_RB_DL,0); + for (int k=0; kulsch[k] = new_eNB_ulsch(max_turbo_iterations,N_RB_DL,0); UE->ulsch[0] = new_ue_ulsch(N_RB_DL,0); printf("ULSCH %p\n",UE->ulsch[0]); @@ -1279,14 +1279,14 @@ int main(int argc, char **argv) { n_rx_dropped++; if (trials < 1000) { - appendVarArray(table_tx, &t_tx); - appendVarArray(table_tx_ifft, &t_tx_ifft); - appendVarArray(table_tx_mod, &t_tx_mod ); - appendVarArray(table_tx_enc, &t_tx_enc ); - appendVarArray(table_rx, &t_rx ); - appendVarArray(table_rx_fft, &t_rx_fft ); - appendVarArray(table_rx_demod, &t_rx_demod ); - appendVarArray(table_rx_dec, &t_rx_dec ); + appendVarArray(&table_tx, &t_tx); + appendVarArray(&table_tx_ifft, &t_tx_ifft); + appendVarArray(&table_tx_mod, &t_tx_mod ); + appendVarArray(&table_tx_enc, &t_tx_enc ); + appendVarArray(&table_rx, &t_rx ); + appendVarArray(&table_rx_fft, &t_rx_fft ); + appendVarArray(&table_rx_demod, &t_rx_demod ); + appendVarArray(&table_rx_dec, &t_rx_dec ); } } //trials diff --git a/openair2/COMMON/openair_defs.h b/openair2/COMMON/openair_defs.h index 4d8d50606c..cdda6a7e87 100644 --- a/openair2/COMMON/openair_defs.h +++ b/openair2/COMMON/openair_defs.h @@ -24,26 +24,6 @@ #include #include -#if !defined (msg) -# define msg(aRGS...) LOG_D(PHY, ##aRGS) -#endif -#ifndef malloc16 -# ifdef __AVX2__ -# define malloc16(x) memalign(32,x) -# else -# define malloc16(x) memalign(16,x) -# endif -#endif -#define free16(y,x) free(y) -#define bigmalloc malloc -#define bigmalloc16 malloc16 -#define openair_free(y,x) free((y)) -#define PAGE_SIZE 4096 - -#define PAGE_MASK 0xfffff000 -#define virt_to_phys(x) (x) - -#define cmax(a,b) ((a>b) ? (a) : (b)) -#define cmin(a,b) ((a #endif // /*__openair_DEFS_H__ */ diff --git a/openair2/SIMULATION/NR_RRC/itti_sim.c b/openair2/SIMULATION/NR_RRC/itti_sim.c index e3792dca77..28de1ca3b8 100644 --- a/openair2/SIMULATION/NR_RRC/itti_sim.c +++ b/openair2/SIMULATION/NR_RRC/itti_sim.c @@ -546,7 +546,7 @@ int main( int argc, char **argv ) #endif logInit(); - //configure_linux(); + //set_latency_target(); printf("Reading in command-line options\n"); get_options (); diff --git a/openair2/UTIL/LISTS/list.h b/openair2/UTIL/LISTS/list.h index b88c581dea..079c723ebf 100644 --- a/openair2/UTIL/LISTS/list.h +++ b/openair2/UTIL/LISTS/list.h @@ -48,6 +48,8 @@ #include "UTIL/MEM/mem_block.h" +#include + //----------------------------------------------------------------------------- void list_init (list_t* , char *); @@ -126,10 +128,13 @@ static inline void * dataArray(varArray_t * input) { return input+1; } -static inline void appendVarArray(varArray_t * input, void* data) { +static inline void appendVarArray(varArray_t ** inputPtr, void* data) { + varArray_t *input=*inputPtr; if (input->size>=input->mallocedSize) { input->mallocedSize+=input->increment; - input=(varArray_t *)realloc(input,sizeof(varArray_t)+input->mallocedSize*input->atomSize); + *inputPtr=(varArray_t *)realloc(input,sizeof(varArray_t)+input->mallocedSize*input->atomSize); + AssertFatal(*inputPtr, "no memory left"); + input=*inputPtr; } memcpy((uint8_t*)(input+1)+input->atomSize*input->size++, data, input->atomSize); } diff --git a/targets/RT/USER/TOOLS/thread_ipc.c b/targets/RT/USER/TOOLS/thread_ipc.c deleted file mode 100644 index 7eda3e8431..0000000000 --- a/targets/RT/USER/TOOLS/thread_ipc.c +++ /dev/null @@ -1,231 +0,0 @@ -/* - * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more - * contributor license agreements. See the NOTICE file distributed with - * this work for additional information regarding copyright ownership. - * The OpenAirInterface Software Alliance licenses this file to You under - * the OAI Public License, Version 1.1 (the "License"); you may not use this file - * except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.openairinterface.org/?page_id=698 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - *------------------------------------------------------------------------------- - * For more information about the OpenAirInterface (OAI) Software Alliance: - * contact@openairinterface.org - */ - -#include -#include -#include -#include - -#include -#include - -#include "thread_ipc.h" - -g_thread_ipc_t thread_ipc = {0}; - -void loop_buffer_reset(buffer_t *loop_buf) -{ - int i; - - for (i = 0; i < BUFFERMAX; i++) { - loop_buf[i].subframe_num = -1; - } - - return; -} - -static void loop_buffer_init(loop_buffer_op_t *loop_buffer) -{ - loop_buffer->packet_num = 0; - loop_buffer->isfull = 0; - loop_buffer->isempty = 1; - - pthread_mutex_init(&loop_buffer->buffer_mutex, NULL); - - pthread_cond_init(&loop_buffer->full_cond, NULL); - pthread_cond_init(&loop_buffer->empty_cond, NULL); - - loop_buffer_reset(loop_buffer->loop_buf); - - return; -} - -static void sync_buffer_init(sync_buffer_t *sync_buffer) -{ - sync_buffer->decoding_subframe_num = 0; - pthread_mutex_init(&sync_buffer->buffer_mutex, NULL); - - return; -} - -int thread_ipc_init(void) -{ - //printf("recv %d\n", thread_ipc.sync_buffer.decoding_subframe_num); - thread_ipc.ue_sync_state = 0; - thread_ipc.rx_timestamp = 0; - thread_ipc.tx_timestamp = 0; - thread_ipc.current_subframe = 0; - - pthread_mutex_init(&thread_ipc.dl_decode_mutex, NULL); - pthread_mutex_lock(&thread_ipc.dl_decode_mutex); - - pthread_mutex_init(&thread_ipc.ul_send_mutex, NULL); - pthread_mutex_lock(&thread_ipc.ul_send_mutex); - - pthread_mutex_init(&thread_ipc.sync_mutex, NULL); - pthread_mutex_lock(&thread_ipc.sync_mutex); - - loop_buffer_init(&thread_ipc.loop_buffer); - sync_buffer_init(&thread_ipc.sync_buffer); - - return 0; -} - -int thread_ipc_deinit(void) -{ - pthread_mutex_destroy(&thread_ipc.ul_send_mutex); - pthread_mutex_destroy(&thread_ipc.sync_mutex); - pthread_mutex_destroy(&thread_ipc.dl_decode_mutex); - - pthread_mutex_destroy(&thread_ipc.loop_buffer.buffer_mutex); - pthread_cond_destroy(&thread_ipc.loop_buffer.full_cond); - pthread_cond_destroy(&thread_ipc.loop_buffer.empty_cond); - - pthread_mutex_destroy(&thread_ipc.sync_buffer.buffer_mutex); - - return 0; -} - -int set_thread_attr(pthread_attr_t *attr, int policy, int priority, int cpuid) -{ - struct sched_param param; - cpu_set_t cpu_info; - - pthread_attr_init(attr); - - if (pthread_attr_setschedpolicy(attr, policy) != 0) { - perror("pthread_attr_setschedpolicy"); - return -1; - } - - param.sched_priority = priority; - - if (pthread_attr_setschedparam(attr, ¶m) != 0) { - perror("pthread_attr_setschedparam"); - return -1; - } - - CPU_ZERO(&cpu_info); - CPU_SET(cpuid, &cpu_info); - - if (pthread_attr_setaffinity_np(attr,sizeof(cpu_set_t),&cpu_info)) { - perror("pthread_attr_setaffinity_np"); - return -1; - } - - if (pthread_attr_setinheritsched(attr, PTHREAD_EXPLICIT_SCHED) != 0) { - perror("pthread_attr_setinheritsched"); - return -1; - } - - return 0; -} - - -int find_subframe_num(unsigned long long current_subframe_num, buffer_t *buf, int *flag) -{ - long long tmp; - int i; - - tmp = current_subframe_num; - - for ( i = 0; i < HIGHBUFFER + 1; i++) { - if(tmp == buf[i].subframe_num) { - return i; - } else if (tmp < buf[i].subframe_num) { - *flag = 1; - } - } - - return -1; -} - -int ue_unsync_thread_ipc_reset(void) -{ - thread_ipc.ue_sync_state = 0; - - pthread_mutex_lock(&thread_ipc.loop_buffer.buffer_mutex); - - if (thread_ipc.loop_buffer.isempty) { - pthread_cond_signal(&thread_ipc.loop_buffer.empty_cond); - } - - if (thread_ipc.loop_buffer.isfull) { - pthread_cond_signal(&thread_ipc.loop_buffer.full_cond); - } - - thread_ipc.loop_buffer.packet_num = 0; - thread_ipc.loop_buffer.isfull = 0; - thread_ipc.loop_buffer.isempty = 1; - - loop_buffer_reset(thread_ipc.loop_buffer.loop_buf); - pthread_mutex_unlock(&thread_ipc.loop_buffer.buffer_mutex); - - thread_ipc.current_subframe = 0; - - return 0; -} -void bind_thread2kernel(int cpu_id) -{ - cpu_set_t mask; - cpu_set_t get; - int i; - int num = sysconf(_SC_NPROCESSORS_CONF); - //printf("system has %d processor(s) by super\n", num); - CPU_ZERO(&mask); - CPU_SET(cpu_id, &mask); - - if (pthread_setaffinity_np(pthread_self(), sizeof(mask), &mask) < 0) { - fprintf(stderr, "set thread affinity failed\n"); - } - - /*CPU_ZERO(&get); - if (pthread_getaffinity_np(pthread_self(), sizeof(get), &get) < 0) { - fprintf(stderr, "get thread affinity failed\n"); - } - for (i = 0; i < num; i++) { - if (CPU_ISSET(i, &get)) { - printf("thread %d is running in processor %d\n", (int)pthread_self(), i); - } - } - if (CPU_ISSET(cpu_id, &get)) { - printf("thread %d is running in processor %d by super\n", (int)pthread_self(), cpu_id); - }*/ -} -void get_thread2kernel(void) -{ - cpu_set_t get; - int i; - int num = sysconf(_SC_NPROCESSORS_CONF); - printf("system has %d processor(s) by super\n", num); - CPU_ZERO(&get); - - if (pthread_getaffinity_np(pthread_self(), sizeof(get), &get) < 0) { - fprintf(stderr, "get thread affinity failed\n"); - } - - for (i = 0; i < num; i++) { - if (CPU_ISSET(i, &get)) { - printf("The thread %d is running in processor %d by super\n", (int)pthread_self(), i); - } - } -} - diff --git a/targets/RT/USER/lte-enb.c b/targets/RT/USER/lte-enb.c index f20f8267ed..0b6b0b3a75 100644 --- a/targets/RT/USER/lte-enb.c +++ b/targets/RT/USER/lte-enb.c @@ -48,8 +48,6 @@ #undef MALLOC //there are two conflicting definitions, so we better make sure we don't use it at all -#include "rt_wrapper.h" - #include "assertions.h" @@ -101,7 +99,6 @@ extern RAN_CONTEXT_t RC; //#define USRP_DEBUG 1 struct timing_info_t { //unsigned int frame, hw_slot, last_slot, next_slot; - RTIME time_min, time_max, time_avg, time_last, time_now; //unsigned int mbox0, mbox1, mbox2, mbox_target; unsigned int n_samples; } timing_info; diff --git a/targets/RT/USER/lte-ru.c b/targets/RT/USER/lte-ru.c index 20644388c8..8ad610f1af 100644 --- a/targets/RT/USER/lte-ru.c +++ b/targets/RT/USER/lte-ru.c @@ -44,7 +44,6 @@ #include #include #include -#include "rt_wrapper.h" #undef MALLOC //there are two conflicting definitions, so we better make sure we don't use it at all diff --git a/targets/RT/USER/lte-softmodem.c b/targets/RT/USER/lte-softmodem.c index 8cc693623b..85e493f194 100644 --- a/targets/RT/USER/lte-softmodem.c +++ b/targets/RT/USER/lte-softmodem.c @@ -34,7 +34,6 @@ #define _GNU_SOURCE /* See feature_test_macros(7) */ #include -#include "rt_wrapper.h" #include @@ -518,13 +517,6 @@ static void wait_nfapi_init(char *thread_name) { int main ( int argc, char **argv ) { - set_priority(79); - if (mlockall(MCL_CURRENT | MCL_FUTURE) == -1) - { - fprintf(stderr, "mlockall: %s\n", strerror(errno)); - return EXIT_FAILURE; - } - int i; int CC_id = 0; int ru_id; @@ -537,8 +529,8 @@ int main ( int argc, char **argv ) } mode = normal_txrx; - set_latency_target(); logInit(); + set_latency_target(); printf("Reading in command-line options\n"); get_options (); @@ -573,13 +565,10 @@ int main ( int argc, char **argv ) init_opt(); // to make a graceful exit when ctrl-c is pressed set_softmodem_sighandler(); - check_clock(); #ifndef PACKAGE_VERSION # define PACKAGE_VERSION "UNKNOWN-EXPERIMENTAL" #endif LOG_I(HW, "Version: %s\n", PACKAGE_VERSION); - printf("Runtime table\n"); - fill_modeled_runtime_table(runtime_phy_rx,runtime_phy_tx); /* Read configuration */ if (RC.nb_inst > 0) { diff --git a/targets/RT/USER/lte-softmodem.h b/targets/RT/USER/lte-softmodem.h index 4154d6c8db..cf35a13fe9 100644 --- a/targets/RT/USER/lte-softmodem.h +++ b/targets/RT/USER/lte-softmodem.h @@ -6,7 +6,6 @@ #include #include #include -#include "rt_wrapper.h" #include #include #include @@ -21,7 +20,6 @@ #include #include #include "threads_t.h" -#include "rt_wrapper.h" #include "../../ARCH/COMMON/common_lib.h" //#undef MALLOC #include "assertions.h" diff --git a/targets/RT/USER/lte-ue.c b/targets/RT/USER/lte-ue.c index 70e4677943..1643ca36ca 100644 --- a/targets/RT/USER/lte-ue.c +++ b/targets/RT/USER/lte-ue.c @@ -31,7 +31,6 @@ */ #include "lte-softmodem.h" -#include "rt_wrapper.h" #include "system.h" #include "LAYER2/MAC/mac.h" diff --git a/targets/RT/USER/lte-uesoftmodem.c b/targets/RT/USER/lte-uesoftmodem.c index dcbecc85ac..4395694bf4 100644 --- a/targets/RT/USER/lte-uesoftmodem.c +++ b/targets/RT/USER/lte-uesoftmodem.c @@ -34,9 +34,6 @@ #define _GNU_SOURCE /* See feature_test_macros(7) */ #include -#include "rt_wrapper.h" - - #undef MALLOC //there are two conflicting definitions, so we better make sure we don't use it at all #include "assertions.h" @@ -542,12 +539,6 @@ AssertFatal(false,""); } int main( int argc, char **argv ) { - set_priority(79); - if (mlockall(MCL_CURRENT | MCL_FUTURE) == -1) - { - fprintf(stderr, "mlockall: %s\n", strerror(errno)); - return EXIT_FAILURE; - } int CC_id; uint8_t abstraction_flag=0; @@ -565,8 +556,8 @@ int main( int argc, char **argv ) { mode = normal_txrx; memset(&openair0_cfg[0],0,sizeof(openair0_config_t)*MAX_CARDS); - set_latency_target(); logInit(); + set_latency_target(); printf("Reading in command-line options\n"); for (int i=0; i2 */ - cpu_set_t cpuset; - int s; - char cpu_affinity[1024]; - CPU_ZERO(&cpuset); -#ifdef CPU_AFFINITY - int j; - if (get_nprocs() > 2) { - for (j = 2; j < get_nprocs(); j++) - CPU_SET(j, &cpuset); - - s = pthread_setaffinity_np(pthread_self(), sizeof(cpu_set_t), &cpuset); - - if (s != 0) { - perror( "pthread_setaffinity_np"); - exit_fun("Error setting processor affinity"); - } - LOG_I(HW, "Setting the affinity of main function to all CPUs, for device library to use CPU 0 only!\n"); - } - -#endif - /* Check the actual affinity mask assigned to the thread */ - s = pthread_getaffinity_np(pthread_self(), sizeof(cpu_set_t), &cpuset); - - if (s != 0) { - perror( "pthread_getaffinity_np"); - exit_fun("Error getting processor affinity "); - } - - memset(cpu_affinity, 0, sizeof(cpu_affinity)); - - for (int j = 0; j < CPU_SETSIZE; j++) { - if (CPU_ISSET(j, &cpuset)) { - char temp[1024]; - sprintf(temp, " CPU_%d ", j); - strcat(cpu_affinity, temp); - } - } - - LOG_I(HW, "CPU Affinity of main() function is... %s\n", cpu_affinity); -#endif - if (create_tasks_ue(NB_UE_INST) < 0) { printf("cannot create ITTI tasks\n"); exit(-1); // need a softer mode diff --git a/targets/RT/USER/rt_wrapper.c b/targets/RT/USER/rt_wrapper.c deleted file mode 100644 index da3a2d3cfe..0000000000 --- a/targets/RT/USER/rt_wrapper.c +++ /dev/null @@ -1,383 +0,0 @@ -/* - * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more - * contributor license agreements. See the NOTICE file distributed with - * this work for additional information regarding copyright ownership. - * The OpenAirInterface Software Alliance licenses this file to You under - * the OAI Public License, Version 1.1 (the "License"); you may not use this file - * except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.openairinterface.org/?page_id=698 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - *------------------------------------------------------------------------------- - * For more information about the OpenAirInterface (OAI) Software Alliance: - * contact@openairinterface.org - */ - -/*! \file rt_wrapper.h -* \brief provides a wrapper for the timing function, runtime calculations for real-time opeartions depending on weather RTAI or DEADLINE_SCHEDULER kernels are used or not -* \author F. Kaltenberger and Navid Nikaein -* \date 2013 -* \version 0.1 -* \company Eurecom -* \email: florian.kaltenberger@eurecom.fr, navid.nikaein@eurecom.fr -* \note -* \warning -*/ -#define _GNU_SOURCE -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "rt_wrapper.h" -#include "system.h" -#include -#include - -#include "openair1/PHY/defs_common.h" - -static int latency_target_fd = -1; -static int32_t latency_target_value = 0; -/* Latency trick - taken from cyclictest.c - * if the file /dev/cpu_dma_latency exists, - * open it and write a zero into it. This will tell - * the power management system not to transition to - * a high cstate (in fact, the system acts like idle=poll) - * When the fd to /dev/cpu_dma_latency is closed, the behavior - * goes back to the system default. - * - * Documentation/power/pm_qos_interface.txt - */ -void set_latency_target(void) { - struct stat s; - int ret; - - if (stat("/dev/cpu_dma_latency", &s) == 0) { - latency_target_fd = open("/dev/cpu_dma_latency", O_RDWR); - - if (latency_target_fd == -1) - return; - - ret = write(latency_target_fd, &latency_target_value, 4); - - if (ret == 0) { - printf("# error setting cpu_dma_latency to %d!: %s\n", latency_target_value, strerror(errno)); - close(latency_target_fd); - return; - } - - printf("# /dev/cpu_dma_latency set to %dus\n", latency_target_value); - } -} - - -struct timespec interval, next, now, res; -clockid_t clock_id = CLOCK_MONOTONIC; //other options are CLOCK_MONOTONIC, CLOCK_REALTIME, CLOCK_PROCESS_CPUTIME_ID, CLOCK_THREAD_CPUTIME_ID -RTIME rt_get_time_ns (void) -{ - clock_gettime(clock_id, &now); - return(now.tv_sec*1e9+now.tv_nsec); -} - -int rt_sleep_ns (RTIME x) -{ - int ret; - clock_gettime(clock_id, &now); - interval.tv_sec = x/((RTIME)1000000000); - interval.tv_nsec = x%((RTIME)1000000000); - //rt_printk("sleeping for %d sec and %d ns\n",interval.tv_sec,interval.tv_nsec); - next = now; - next.tv_sec += interval.tv_sec; - next.tv_nsec += interval.tv_nsec; - - if (next.tv_nsec>=1000000000) { - next.tv_nsec -= 1000000000; - next.tv_sec++; - } - - ret = clock_nanosleep(clock_id, TIMER_ABSTIME, &next, NULL); - - /* - if (ret==EFAULT) - rt_printk("rt_sleep_ns returned EFAULT (%d), reqested %d sec and %d ns\n",ret,next.tv_sec,next.tv_nsec); - if (ret==EINVAL) - rt_printk("rt_sleep_ns returned EINVAL (%d), reqested %d sec and %d ns\n",ret,next.tv_sec,next.tv_nsec); - if (ret==EINTR) - rt_printk("rt_sleep_ns returned EINTR (%d), reqested %d sec and %d ns\n",ret,next.tv_sec,next.tv_nsec); - */ - - return(ret); -} - -void check_clock(void) -{ - if (clock_getres(clock_id, &res)) { - printf("clock_getres failed"); - } else { - printf("reported resolution = %lld ns\n", (long long int) ((int) 1e9 * res.tv_sec) + (long long int) res.tv_nsec); - } -} - -uint16_t cell_processing_dl[6]={10,15,24,42,80,112}; -uint16_t platform_processing_dl=20; // upperbound for GPP, LXC, DOCKER and KVM -uint16_t user_processing_dl_a[6]={2,4,5,7,10,12}; -uint16_t user_processing_dl_b[6]={10, 15, 25, 70, 110, 150}; -uint16_t user_processing_dl_err[6]={20, 40, 60, 90, 120, 160}; -uint16_t protocol_processing_dl[6]={150, 250, 350, 450, 650, 800}; // assumption: max MCS 27 --> gives an upper bound for the transport block size : to be measured - -uint16_t cell_processing_ul[6]={10,15,24,42,80,112}; -uint16_t platform_processing_ul=30; // upperbound for GPP, LXC, DOCKER and KVM -uint16_t user_processing_ul_a[6]={5, 9, 12, 24, 33, 42}; -uint16_t user_processing_ul_b[6]={20, 30, 40, 76, 140, 200}; -uint16_t user_processing_ul_err[6]={15, 25, 32, 60, 80, 95}; -uint16_t protocol_processing_ul[6]={100, 200, 300, 400, 550, 700}; // assumption: max MCS 16 --> gives an upper bound for the transport block size - -int fill_modeled_runtime_table(uint16_t runtime_phy_rx[29][6], - uint16_t runtime_phy_tx[29][6]){ - //double cpu_freq; - //cpu_freq = get_cpu_freq_GHz(); - // target_dl_mcs - // target_ul_mcs - // frame_parms[0]->N_RB_DL - int i,j; - memset(runtime_phy_rx,0,sizeof(uint16_t)*29*6); - memset(runtime_phy_tx,0,sizeof(uint16_t)*29*6); - /* only the BBU/PHY procesing time */ - for (i=0;i<29;i++){ - for (j=0;j<6;j++){ - runtime_phy_rx[i][j] = cell_processing_ul[j] + platform_processing_ul + user_processing_ul_err[j] + user_processing_ul_a[j]*i+ user_processing_ul_b[j]; - runtime_phy_tx[i][j] = cell_processing_dl[j] + platform_processing_dl + user_processing_dl_err[j] + user_processing_dl_a[j]*i+ user_processing_dl_b[j]; - } - } - return 0; -} - -// int runtime_upper_layers[6]; // values for different RBs -// int runtime_phy_rx[29][6]; // SISO [MCS 0-28][RBs 0-5 : 6, 15, 25, 50, 75, 100] -// int runtime_phy_tx[29][6]; // SISO [MCS 0-28][RBs 0-5 : 6, 15, 25, 50, 75, 100] - -// target_dl_mcs - // target_ul_mcs - // frame_parms[0]->N_RB_DL - //runtime_upper_layers[6]; // values for different RBs - // int runtime_phy_rx[29][6]; // SISO [MCS 0-28][RBs 0-5 : 6, 15, 25, 50, 75, 100] - // int runtime_phy_tx[29][6] - -double get_runtime_tx(int tx_subframe, uint16_t runtime_phy_tx[29][6], uint32_t mcs, int N_RB_DL,double cpuf,int nb_tx_antenna){ - int i; - double runtime; - //printf("cpuf =%lf \n",cpuf); - switch(N_RB_DL){ - case 6: - i = 0; - break; - case 15: - i = 1; - break; - case 25: - i = 2; - break; - case 50: - i = 3; - break; - case 75: - i = 4; - break; - case 100: - i = 5; - break; - default: - i = 3; - break; - } - - runtime = ( (3.2/cpuf)*(double)runtime_phy_tx[mcs][i] + (3.2/cpuf)*(double)protocol_processing_dl[i])/1000 ; - printf("Setting tx %d runtime value (ms) = %lf\n",tx_subframe,runtime); - - return runtime; - } - -double get_runtime_rx(int rx_subframe, uint16_t runtime_phy_rx[29][6], uint32_t mcs, int N_RB_DL,double cpuf,int nb_rx_antenna){ - int i; - double runtime; - - //printf("N_RB_DL=%d cpuf =%lf \n",N_RB_DL, cpuf); - switch(N_RB_DL){ - case 6: - i = 0; - break; - case 15: - i = 1; - break; - case 25: - i = 2; - break; - case 50: - i = 3; - break; - case 75: - i = 4; - break; - case 100: - i = 5; - break; - default: - i = 3; - break; - } - - runtime = ((3.2/cpuf)*(double)runtime_phy_rx[mcs][i] + (3.2/cpuf)*(double)protocol_processing_ul[i])/1000 ; - printf("Setting rx %d runtime value (ms) = %lf \n",rx_subframe, runtime); - - return runtime; -} - -#ifdef DEADLINE_SCHEDULER -int sched_setattr(pid_t pid, const struct sched_attr *attr, unsigned int flags) -{ - - return syscall(__NR_sched_setattr, pid, attr, flags); -} - - -int sched_getattr(pid_t pid,struct sched_attr *attr,unsigned int size, unsigned int flags) -{ - - return syscall(__NR_sched_getattr, pid, attr, size, flags); -} - -#endif - -void thread_top_init(char *thread_name, - int affinity, - uint64_t runtime, - uint64_t deadline, - uint64_t period) { - - MSC_START_USE(); - -#ifdef DEADLINE_SCHEDULER - struct sched_attr attr; - - unsigned int flags = 0; - - attr.size = sizeof(attr); - attr.sched_flags = 0; - attr.sched_nice = 0; - attr.sched_priority = 0; - - attr.sched_policy = SCHED_DEADLINE; - attr.sched_runtime = runtime; - attr.sched_deadline = deadline; - attr.sched_period = period; - - if (sched_setattr(0, &attr, flags) < 0 ) { - perror("[SCHED] eNB tx thread: sched_setattr failed\n"); - fprintf(stderr,"sched_setattr Error = %s",strerror(errno)); - exit(1); - } - -#else //LOW_LATENCY - int policy, s, j; - struct sched_param sparam; - char cpu_affinity[1024]; - cpu_set_t cpuset; - int settingPriority = 1; - - /* Set affinity mask to include CPUs 2 to MAX_CPUS */ - /* CPU 0 is reserved for UHD threads */ - /* CPU 1 is reserved for all RX_TX threads */ - /* Enable CPU Affinity only if number of CPUs > 2 */ - CPU_ZERO(&cpuset); - -#ifdef CPU_AFFINITY - if (affinity == 0) { - LOG_W(HW,"thread_top_init() called with affinity==0, but overruled by #ifdef CPU_AFFINITY\n"); - } - else if (get_nprocs() > 2) - { - for (j = 2; j < get_nprocs(); j++) - CPU_SET(j, &cpuset); - s = pthread_setaffinity_np(pthread_self(), sizeof(cpu_set_t), &cpuset); - if (s != 0) - { - perror( "pthread_setaffinity_np"); - exit_fun("Error setting processor affinity"); - } - } -#else //CPU_AFFINITY - if (affinity) { - LOG_W(HW,"thread_top_init() called with affinity>0, but overruled by #ifndef CPU_AFFINITY.\n"); - } -#endif //CPU_AFFINITY - - /* Check the actual affinity mask assigned to the thread */ - s = pthread_getaffinity_np(pthread_self(), sizeof(cpu_set_t), &cpuset); - if (s != 0) - { - perror( "pthread_getaffinity_np"); - exit_fun("Error getting processor affinity "); - } - memset(cpu_affinity,0,sizeof(cpu_affinity)); - for (j = 0; j < 1024; j++) - { - if (CPU_ISSET(j, &cpuset)) - { - char temp[1024]; - sprintf (temp, " CPU_%d", j); - strcat(cpu_affinity, temp); - } - } - - if (checkIfFedoraDistribution()) - if (checkIfGenericKernelOnFedora()) - if (checkIfInsideContainer()) - settingPriority = 0; - - if (settingPriority) { - memset(&sparam, 0, sizeof(sparam)); - sparam.sched_priority = sched_get_priority_max(SCHED_FIFO); - policy = SCHED_FIFO; - - s = pthread_setschedparam(pthread_self(), policy, &sparam); - if (s != 0) { - perror("pthread_setschedparam : "); - exit_fun("Error setting thread priority"); - } - - s = pthread_getschedparam(pthread_self(), &policy, &sparam); - if (s != 0) { - perror("pthread_getschedparam : "); - exit_fun("Error getting thread priority"); - } - - pthread_setname_np(pthread_self(), thread_name); - - LOG_I(HW, "[SCHED][eNB] %s started on CPU %d, sched_policy = %s , priority = %d, CPU Affinity=%s \n",thread_name,sched_getcpu(), - (policy == SCHED_FIFO) ? "SCHED_FIFO" : - (policy == SCHED_RR) ? "SCHED_RR" : - (policy == SCHED_OTHER) ? "SCHED_OTHER" : - "???", - sparam.sched_priority, cpu_affinity ); - } - -#endif //LOW_LATENCY - - mlockall(MCL_CURRENT | MCL_FUTURE); - -} - - diff --git a/targets/RT/USER/rt_wrapper.h b/targets/RT/USER/rt_wrapper.h deleted file mode 100644 index 32554d9e17..0000000000 --- a/targets/RT/USER/rt_wrapper.h +++ /dev/null @@ -1,132 +0,0 @@ -/* - * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more - * contributor license agreements. See the NOTICE file distributed with - * this work for additional information regarding copyright ownership. - * The OpenAirInterface Software Alliance licenses this file to You under - * the OAI Public License, Version 1.1 (the "License"); you may not use this file - * except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.openairinterface.org/?page_id=698 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - *------------------------------------------------------------------------------- - * For more information about the OpenAirInterface (OAI) Software Alliance: - * contact@openairinterface.org - */ - -/*! \file rt_wrapper.h -* \brief provides a wrapper for the timing function for real-time opeartions. It also implements an API for the SCHED_DEADLINE kernel scheduler. -* \author F. Kaltenberger and Navid Nikaein -* \date 2013 -* \version 0.1 -* \company Eurecom -* \email: florian.kaltenberger@eurecom.fr, navid.nikaein@eurecom.fr -* \note -* \warning This code will be removed when a legacy libc API becomes available. -*/ - -#ifndef _RT_WRAPPER_H_ -#define _RT_WRAPPER_H_ - -#define _GNU_SOURCE -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "common/utils/LOG/log_extern.h" -#include "msc.h" - -#define RTIME long long int - -#define rt_printk printf - -void set_latency_target(void); - -RTIME rt_get_time_ns (void); - -int rt_sleep_ns (RTIME x); - -void check_clock(void); - -int fill_modeled_runtime_table(uint16_t runtime_phy_rx[29][6],uint16_t runtime_phy_tx[29][6]); - -double get_runtime_tx(int tx_subframe, uint16_t runtime_phy_tx[29][6],uint32_t mcs, int N_RB_DL,double cpuf,int nb_tx_antenna); - -double get_runtime_rx(int rx_subframe, uint16_t runtime_phy_rx[29][6], uint32_t mcs, int N_RB_DL,double cpuf,int nb_rx_antenna); -/** - * see https://www.kernel.org/doc/Documentation/scheduler/sched-deadline.txt or - * http://www.blaess.fr/christophe/2014/04/05/utiliser-un-appel-systeme-inconnu-de-la-libc/ - */ -#ifdef DEADLINE_SCHEDULER - -#define gettid() syscall(__NR_gettid) - -#define SCHED_DEADLINE 6 - -/* XXX use the proper syscall numbers */ -#ifdef __x86_64__ -#define __NR_sched_setattr 314 -#define __NR_sched_getattr 315 -#endif - -#ifdef __i386__ -#define __NR_sched_setattr 351 -#define __NR_sched_getattr 352 -#endif - -struct sched_attr { - __u32 size; - - __u32 sched_policy; - __u64 sched_flags; - - /* SCHED_NORMAL, SCHED_BATCH */ - __s32 sched_nice; - - /* SCHED_FIFO, SCHED_RR */ - __u32 sched_priority; - - /* SCHED_DEADLINE (nsec) */ - __u64 sched_runtime; - __u64 sched_deadline; - __u64 sched_period; -}; - -int sched_setattr(pid_t pid, const struct sched_attr *attr, unsigned int flags); - -int sched_getattr(pid_t pid,struct sched_attr *attr,unsigned int size, unsigned int flags); - -#endif - -#define gettid() syscall(__NR_gettid) // for gettid - - -void thread_top_init(char *thread_name, - int affinity, - uint64_t runtime, - uint64_t deadline, - uint64_t period); - -#endif diff --git a/targets/RT/USER/ru_control.c b/targets/RT/USER/ru_control.c index 95b5ce6155..7280c78523 100644 --- a/targets/RT/USER/ru_control.c +++ b/targets/RT/USER/ru_control.c @@ -42,7 +42,6 @@ #include #include #include -#include "rt_wrapper.h" #undef MALLOC //there are two conflicting definitions, so we better make sure we don't use it at all diff --git a/targets/build_helper.bash b/targets/build_helper.bash deleted file mode 100755 index 9c98ef85b0..0000000000 --- a/targets/build_helper.bash +++ /dev/null @@ -1,1315 +0,0 @@ -#/* -# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more -# * contributor license agreements. See the NOTICE file distributed with -# * this work for additional information regarding copyright ownership. -# * The OpenAirInterface Software Alliance licenses this file to You under -# * the OAI Public License, Version 1.1 (the "License"); you may not use this file -# * except in compliance with the License. -# * You may obtain a copy of the License at -# * -# * http://www.openairinterface.org/?page_id=698 -# * -# * Unless required by applicable law or agreed to in writing, software -# * distributed under the License is distributed on an "AS IS" BASIS, -# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# * See the License for the specific language governing permissions and -# * limitations under the License. -# *------------------------------------------------------------------------------- -# * For more information about the OpenAirInterface (OAI) Software Alliance: -# * contact@openairinterface.org -# */ -################################################################################ -# file build_helper.bash -# brief -# author Lionel Gauthier and Navid Nikaein -# company Eurecom -# email: lionel.gauthier@eurecom.fr and navid.nikaein@eurecom.fr -# -####################################### -# Helper Func -###################################### - -declare ROOT_UID=0 -declare E_NOTROOT=67 -declare NUM_CPU=`cat /proc/cpuinfo | grep processor | wc -l` -declare OAI_INSTALLED=1 -declare PWD=`pwd` -declare USER=`whoami` -declare BUILD_FROM_MAKEFILE=0 -declare SUDO='' -declare PW='' -declare UBUNTU_REL=`lsb_release -r | cut -f2` -declare UBUNTU_REL_NAME=`lsb_release -cs` - -set_build_from_makefile(){ - BUILD_FROM_MAKEFILE=$1 -} - -check_for_root_rights() { - - # if [[ $EUID -ne $ROOT_EUID ]]; then - if [ $USER != "root" ]; then - SUDO="sudo -E " - echo "Run as a sudoers" - return 1 - else - echo "Run as a root" - return 0 - fi -} - -test_install_package() { - # usage: test_install_package package_name - - if [ $# -eq 1 ]; then - dpkg -s "$1" > /dev/null 2>&1 && { - echo "$1 is installed." - } || { - echo "$1 is not installed." - OAI_INSTALLED=0 - $SUDO apt-get install -y $@ - } - fi -} - -test_uninstall_package() { - - if [ $# -eq 1 ]; then - dpkg -s "$1" > /dev/null 2>&1 && { - $SUDO apt-get remove --assume-yes $1 - echo "$1 is uninstalled." - } || { - echo "$1 is not installed." - } - fi -} -test_command_install_script() { - # usage: test_command_install_script searched_binary script_to_be_invoked_if_binary_not_found - command -v $1 >/dev/null 2>&1 || { echo_warning "Program $1 is not installed. Trying installing it." >&2; bash $2; command -v $1 >/dev/null 2>&1 || { echo_fatal "Program $1 is not installed. Aborting." >&2; };} - echo_success "$1 available" -} - - -check_for_machine_type(){ - MACHINE_TYPE=`uname -m` - if [ ${MACHINE_TYPE} = "x86_64" ]; then - return 64 # 64-bit stuff here - else - if [ ${MACHINE_TYPE} = "i686" ]; then - return 32 # 32-bit stuff here - else - return -1 - fi - fi -} - -#################################################### -## OAI related functions -##################################################### - -#################################################### -# 1. install the required packages -#################################################### - -make_certs(){ - - # for certtificate generation - rm -rf demoCA - mkdir -m 777 -p demoCA - echo 01 > demoCA/serial - touch demoCA/index.txt - - echo "creating the certificate" - - user=$(whoami) - HOSTNAME=$(hostname -f) - - echo "Creating certificate for user '$HOSTNAME'" - -# CA self certificate - openssl req -new -batch -x509 -days 3650 -nodes -newkey rsa:1024 -out cacert.pem -keyout cakey.pem -subj /CN=eur/C=FR/ST=PACA/L=Aix/O=Eurecom/OU=CM - - # openssl genrsa -out user.key.pem 1024 - openssl genrsa -out hss.key.pem 1024 - #openssl req -new -batch -out user.csr.pem -key user.key.pem -subj /CN=$HOSTNAME.eur/C=FR/ST=PACA/L=Aix/O=Eurecom/OU=CM - openssl req -new -batch -out hss.csr.pem -key hss.key.pem -subj /CN=hss.eur/C=FR/ST=PACA/L=Aix/O=Eurecom/OU=CM - openssl ca -cert cacert.pem -keyfile cakey.pem -in hss.csr.pem -out hss.cert.pem -outdir . -batch - - if [ ! -d /usr/local/etc/freeDiameter ]; then - echo "Creating non existing directory: /usr/local/etc/freeDiameter/" - $SUDO mkdir /usr/local/etc/freeDiameter/ - fi - - echo "Copying *.pem to /usr/local/etc/freeDiameter/" - $SUDO cp *.pem /usr/local/etc/freeDiameter/ - mv *.pem bin/ - -# openssl genrsa -out ubuntu.key.pem 1024 -# openssl req -new -batch -x509 -out ubuntu.csr.pem -key ubuntu.key.pem -subj /CN=ubuntu.localdomain/C=FR/ST=BdR/L=Aix/O=fD/OU=Tests -# openssl ca -cert cacert.pem -keyfile cakey.pem -in ubuntu.csr.pem -out ubuntu.cert.pem -outdir . -batch - -} - -check_install_nettle(){ - if [ ! -f ./.lock_oaibuild ]; then - if [ $UBUNTU_REL = "12.04" ]; then - test_uninstall_package nettle-dev - test_uninstall_package nettle-bin - - if [ ! -d /usr/local/src/ ]; then - echo "/usr/local/src/ doesn't exist please create one" - exit -1 - fi - - if [ ! -w /usr/local/src/ ]; then - echo "You don't have permissions to write to /usr/local/src/, installing as a sudoer" - # exit -1 - fi - - cd /usr/local/src/ - - echo "Downloading nettle archive" - - if [ -f nettle-2.5.tar.gz ]; then - $SUDO rm -f nettle-2.5.tar.gz - fi - if [ -f nettle-2.5.tar ]; then - $SUDO rm -f nettle-2.5.tar - fi - if [ -d nettle-2.5 ]; then - $SUDO rm -rf nettle-2.5/ - fi - - - $SUDO wget ftp://ftp.lysator.liu.se/pub/security/lsh/nettle-2.5.tar.gz - $SUDO gunzip nettle-2.5.tar.gz - $SUDO echo "Uncompressing nettle archive" - $SUDO tar -xf nettle-2.5.tar - cd nettle-2.5/ - $SUDO ./configure --disable-openssl --enable-shared --prefix=/usr - if [ $? -ne 0 ]; then - exit -1 - fi - echo "Compiling nettle" - $SUDO make -j $NUM_CPU - $SUDO make check - $SUDO make install - cd ../ - fi - fi -} - -check_install_freediamter(){ - - if [ $UBUNTU_REL = "12.04" ]; then - - if [ ! -d /usr/local/src/ ]; then - echo "/usr/local/src/ doesn't exist please create one" - exit -1 - fi - - if [ ! -w /usr/local/src/ ]; then - echo "You don't have permissions to write to /usr/local/src/, installing as a sudoer" -# exit -1 - fi - - cd /usr/local/src/ - - echo "Downloading nettle archive" - - if [ -f nettle-2.5.tar.gz ]; then - $SUDO rm -f nettle-2.5.tar.gz - fi - if [ -f nettle-2.5.tar ]; then - $SUDO rm -f nettle-2.5.tar - fi - if [ -d nettle-2.5 ]; then - $SUDO rm -rf nettle-2.5/ - fi - - - $SUDO wget ftp://ftp.lysator.liu.se/pub/security/lsh/nettle-2.5.tar.gz - $SUDO gunzip nettle-2.5.tar.gz - $SUDO echo "Uncompressing nettle archive" - $SUDO tar -xf nettle-2.5.tar - cd nettle-2.5/ - $SUDO ./configure --disable-openssl --enable-shared --prefix=/usr - if [ $? -ne 0 ]; then - exit -1 - fi - echo "Compiling nettle" - $SUDO make -j $NUM_CPU - $SUDO make check - $SUDO make install - cd ../ - fi - - echo "Downloading gnutls archive" - - if [ -f gnutls-3.1.23.tar.xz ]; then - $SUDO rm -f gnutls-3.1.23.tar.xz - fi - if [ -d gnutls-3.1.23/ ]; then - $SUDO rm -rf gnutls-3.1.23/ - fi - - test_uninstall_package libgnutls-dev - - $SUDO wget ftp://ftp.gnutls.org/gcrypt/gnutls/v3.1/gnutls-3.1.23.tar.xz - $SUDO tar -xf gnutls-3.1.23.tar.xz - echo "Uncompressing gnutls archive ($PWD)" - cd gnutls-3.1.23/ - $SUDO ./configure --prefix=/usr - if [ $? -ne 0 ]; then - exit -1 - fi - echo "Compiling gnutls" - $SUDO make -j $NUM_CPU - $SUDO make install - cd ../ - - echo "Downloading freeDiameter archive" - - if [ -f 1.1.5.tar.gz ]; then - $SUDO rm -f 1.1.5.tar.gz - fi - if [ -d freeDiameter-1.1.5/ ]; then - $SUDO rm -rf freeDiameter-1.1.5/ - fi - - $SUDO wget http://www.freediameter.net/hg/freeDiameter/archive/1.1.5.tar.gz - $SUDO tar -xzf 1.1.5.tar.gz - echo "Uncompressing freeDiameter archive" - cd freeDiameter-1.1.5 - $SUDO patch -p1 < $OPENAIR3_DIR/S6A/freediameter/freediameter-1.1.5.patch - $SUDO mkdir build - cd build - $SUDO cmake -DCMAKE_INSTALL_PREFIX:PATH=/usr ../ - if [ $? -ne 0 ]; then - exit -1 - fi - echo "Compiling freeDiameter" - $SUDO make -j $NUM_CPU -#make help - $SUDO make test - $SUDO sudo make install - -# make_certs - -} - - -test_is_host_reachable() { - ping -c 1 $1 > /dev/null || { echo_fatal "$2 host $1 does not respond to ping" >&2 ; } - echo_success "$2 host $1 is reachable" -} - - -check_epc_s6a_certificate() { - if [ -d /usr/local/etc/freeDiameter ] - then - if [ -f /usr/local/etc/freeDiameter/user.cert.pem ] - then - full_hostname=`cat /usr/local/etc/freeDiameter/user.cert.pem | grep "Subject" | grep "CN" | cut -d '=' -f6` - if [ a$full_hostname == a`hostname`.${1:-'eur'} ] - then - echo_success "EPC S6A: Found valid certificate in /usr/local/etc/freeDiameter" - return 0 - fi - fi - fi - echo_error "EPC S6A: Did not find valid certificate in /usr/local/etc/freeDiameter" - echo_warning "EPC S6A: generatting new certificate in /usr/local/etc/freeDiameter..." - cd $OPENAIR3_DIR/S6A/freediameter - ./make_certs.sh ${1:-'eur'} - if [ $# -lt 2 ] ; then - check_epc_s6a_certificate ${1:-'eur'} 2 - return $? - else - exit 1 - fi -} - - -check_hss_s6a_certificate() { - if [ -d /usr/local/etc/freeDiameter ]; then - if [ -f /usr/local/etc/freeDiameter/hss.cert.pem ]; then - full_hostname=`cat /usr/local/etc/freeDiameter/hss.cert.pem | grep "Subject" | grep "CN" | cut -d '=' -f6` - if [ a$full_hostname == a`hostname`.${1:-'eur'} ] - then - echo_success "HSS S6A: Found valid certificate in /usr/local/etc/freeDiameter" - return 0 - else - echo_error "Bad hss hostname found in cert file: "$full_hostname " hostname is "`hostname` - fi - fi - fi - echo_error "S6A: Did not find valid certificate in /usr/local/etc/freeDiameter" - echo_warning "S6A: generatting new certificate in /usr/local/etc/freeDiameter..." - cd $OPENAIR3_DIR/OPENAIRHSS/conf - ./make_certs.sh ${1:-'eur'} - if [ $# -lt 2 ] ; then - check_hss_s6a_certificate ${1:-'eur'} 2 - return $? - else - exit 1 - fi -} - -check_install_usrp_uhd_driver(){ - if [ ! -f /etc/apt/sources.list.d/ettus.list ] ; then - $SUDO bash -c 'echo "deb http://files.ettus.com/binaries/uhd/repo/uhd/ubuntu/`lsb_release -cs` `lsb_release -cs` main" >> /etc/apt/sources.list.d/ettus.list' - $SUDO apt-get update - fi - $SUDO apt-get install -t $UBUNTU_REL_NAME uhd - test_install_package python - test_install_package libboost-all-dev - test_install_package libusb-1.0-0-dev - #test_install_package uhd -} - -check_install_oai_software() { - - if [ ! -f ./.lock_oaibuild ]; then - $SUDO apt-get update - if [ $UBUNTU_REL = "12.04" ]; then - test_uninstall_package nettle-dev - test_uninstall_package nettle-bin - else - test_install_package nettle-dev - test_install_package nettle-bin - fi - test_install_package autoconf - test_install_package automake - test_install_package bison - test_install_package build-essential - test_install_package dialog - test_install_package flex - test_install_package gawk - test_install_package gcc - test_install_package gdb - test_install_package make - test_install_package cmake - test_install_package openssh-client - test_install_package openssh-server - sudo service ssh start - test_install_package unzip - test_install_package autoconf - test_install_package automake - test_install_package bison - test_install_package build-essential - test_install_package check - test_install_package ethtool - test_install_package flex - test_install_package g++ - test_install_package gawk - test_install_package gcc - test_install_package gccxml - test_install_package gdb - test_install_package guile-2.0-dev - test_install_package iperf - test_install_package iproute - test_install_package iptables - test_install_package libatlas-base-dev - test_install_package libatlas-dev - test_install_package libblas3gf - test_install_package libblas-dev - test_install_package liblapack-dev - test_install_package liblapack-dev -# if [ $MACHINE_ARCH = 64 ]; then - test_install_package libconfig8-dev -# else -# test_install_package libconfig-dev -# fi - test_install_package libforms-bin - test_install_package libforms-dev - test_install_package libgcrypt11-dev - test_install_package libgmp-dev - test_install_package libgtk-3-dev - test_install_package libidn11-dev - test_install_package libidn2-0-dev - test_install_package libpgm-dev - test_install_package libpgm-5.1-0 - test_install_package libpthread-stubs0-dev - test_install_package libsctp1 - test_install_package libsctp-dev - test_install_package libtasn1-3-dev - test_install_package libxml2 - test_install_package libxml2-dev -# test_install_package linux-headers-`uname -r` - test_install_package openssl - test_install_package libssl-dev - test_install_package pkg-config - test_install_package python-dev - test_install_package python-pexpect - test_install_package sshfs - test_install_package subversion - test_install_package valgrind - test_install_package doxygen - test_install_package graphviz - -# test_install_package libboost-all-dev - - if [ $OAI_INSTALLED = 1 ]; then - touch ./.lock_oaibuild - fi - - else - echo_info "All the required packages installed: skip" - fi - -} - -check_install_hss_software() { - if [ ! -f ./.lock_oaibuild ]; then - $SUDO apt-get update - if [ $UBUNTU_REL = "12.04" ]; then - test_uninstall_package nettle-dev - test_uninstall_package nettle-bin - else - test_install_package nettle-dev - test_install_package nettle-bin - fi - test_install_package autoconf - test_install_package automake - test_install_package bison - test_install_package build-essential - test_install_package cmake - test_install_package cmake-curses-gui - test_install_package dialog - test_install_package dkms - test_install_package flex - test_install_package gawk - test_install_package gcc - test_install_package gdb - test_install_package guile-2.0-dev - test_install_package g++ - test_install_package libgmp-dev - test_install_package libgcrypt11-dev - test_install_package libidn11-dev - test_install_package libidn2-0-dev - test_install_package libmysqlclient-dev - test_install_package libtasn1-3-dev - test_install_package libsctp1 - test_install_package libsctp-dev - test_install_package libxml2-dev -# test_install_package linux-headers-`uname -r` - test_install_package make - test_install_package mysql-client - test_install_package mysql-server-core-5.5 - test_install_package mysql-server - test_install_package openssh-client - test_install_package openssh-server - sudo service ssh start - test_install_package phpmyadmin - test_install_package python-dev - test_install_package sshfs - test_install_package swig - test_install_package unzip -# test_install_package nettle-bin -# test_install_package nettle-dev - test_install_package valgrind - - if [ $OAI_INSTALLED = 1 ]; then - touch ./.lock_oaibuild - fi - - else - echo_info "All the required packages installed: skip" - fi - -} - -check_install_epc_software() { - - if [ ! -f ./.lock_oaibuild ]; then - $SUDO apt-get update - if [ $UBUNTU_REL = "12.04" ]; then - test_uninstall_package nettle-dev - test_uninstall_package nettle-bin - else - test_install_package nettle-dev - test_install_package nettle-bin - fi - test_install_package autoconf - test_install_package automake - test_install_package bison - test_install_package build-essential - test_install_package check - test_install_package cmake - test_install_package cmake-curses-gui - test_install_package dialog - test_install_package ethtool - test_install_package flex - test_install_package g++ - test_install_package gawk - test_install_package gcc - test_install_package gccxml - test_install_package gdb - test_install_package guile-2.0-dev - test_install_package gtkwave - test_install_package iperf - test_install_package iproute - test_install_package iptables - test_install_package iptables-dev - test_install_package libatlas-base-dev - test_install_package libatlas-dev - test_install_package libblas - test_install_package libblas-dev -# if [ $MACHINE_ARCH = 64 ]; then - test_install_package libconfig8-dev -# else -# test_install_package libconfig-dev -# fi - test_install_package libforms-bin - test_install_package libforms-dev - test_install_package libgcrypt11-dev - test_install_package libgmp-dev - test_install_package libgtk-3-dev - test_install_package libidn11-dev - test_install_package libidn2-0-dev - test_install_package libmysqlclient-dev - test_install_package libpgm-dev - test_install_package libpthread-stubs0-dev - test_install_package libsctp1 - test_install_package libsctp-dev - test_install_package libssl-dev - test_install_package libtasn1-3-dev - test_install_package libtool - test_install_package libxml2 - test_install_package libxml2-dev -# test_install_package linux-headers-`uname -r` - test_install_package make - test_install_package openssh-client - test_install_package openssh-server - $SUDO service ssh start - test_install_package openssl - test_install_package openvpn - test_install_package pkg-config - test_install_package python-dev - test_install_package sshfs - test_install_package subversion - test_install_package swig - test_install_package tshark - test_install_package uml-utilities - test_install_package unzip - test_install_package valgrind - test_install_package vlan - - if [ $OAI_INSTALLED = 1 ]; then - touch ./.lock_oaibuild - fi - - else - echo_info "All the required packages installed: skip" - fi - -} - -check_install_asn1c(){ - - test_command_install_script "asn1c" "$OPENAIR_TARGETS/SCRIPTS/install_asn1c_0.9.24.modified.bash $SUDO" - - # One mor check about version of asn1c - ASN1C_COMPILER_REQUIRED_VERSION_MESSAGE="ASN.1 Compiler, v0.9.24" - ASN1C_COMPILER_VERSION_MESSAGE=`asn1c -h 2>&1 | grep -i ASN\.1\ Compiler` - ##ASN1C_COMPILER_VERSION_MESSAGE=`trim $ASN1C_COMPILER_VERSION_MESSAGE` - if [ "$ASN1C_COMPILER_VERSION_MESSAGE" != "$ASN1C_COMPILER_REQUIRED_VERSION_MESSAGE" ]; then - # diff <(echo -n "$ASN1C_COMPILER_VERSION_MESSAGE") <(echo -n "$ASN1C_COMPILER_REQUIRED_VERSION_MESSAGE") - echo_error "Version of asn1c is not the required one, do you want to install the required one (overwrite installation) ? (Y/n)" - echo_error "$ASN1C_COMPILER_VERSION_MESSAGE" - while read -r -n 1 -s answer; do - if [[ $answer = [YyNn] ]]; then - [[ $answer = [Yy] ]] && $OPENAIR_TARGETS/SCRIPTS/install_asn1c_0.9.24.modified.bash $SUDO - [[ $answer = [Nn] ]] && echo_error "Version of asn1c is not the required one, exiting." && exit 1 - break - fi - done - fi - -} - -################################################# -# 2. compile -################################################ -compile_hss() { - cd $OPENAIR3_DIR/OPENAIRHSS - - if [ "$1" -eq 1 ]; then - echo_info "build a clean HSS" - rm -rfv obj* - rm -rfv m4 - rm -rfv .autom4* - rm -fv configure - fi - - OBJ_DIR=`find . -maxdepth 1 -type d -iname obj*` - - if [ ! -n "$OBJ_DIR" ]; then - OBJ_DIR="objs" - mkdir --verbose -m 777 ./$OBJ_DIR - else - OBJ_DIR=`basename $OBJ_DIR` - fi - - if [ ! -f "$OBJ_DIR"/Makefile ]; then - if [ ! -d m4 ]; then - mkdir --verbose -m 777 m4 - fi - echo_success "Invoking autogen" - ./autogen.sh - if [ $? -ne 0 ]; then - return 1 - fi - cd $OBJ_DIR - echo_success "Invoking configure" - ../configure - if [ $? -ne 0 ]; then - return 1 - fi - else - cd $OBJ_DIR - fi - - if [ -f Makefile ]; then - echo_success "Compiling..." - make ; #-j $NUM_CPU - if [ $? -ne 0 ]; then - echo_error "Build failed, exiting" - return 1 - else - return 0 - fi - else - echo_error "Configure failed, aborting" - fi - return 1 -} - - -compile_epc() { - cd $OPENAIR3_DIR - if [ $1 = 1 ]; then - echo_info "build a clean EPC" - bash_exec "rm -rf objs" - fi - OBJ_DIR=`find . -maxdepth 1 -type d -iname obj*` - if [ ! -n "$OBJ_DIR" ]; then - OBJ_DIR="objs" - bash_exec "mkdir -m 777 ./$OBJ_DIR" - echo_success "Created $OBJ_DIR directory" - else - OBJ_DIR=`basename $OBJ_DIR` - fi - if [ ! -f $OBJ_DIR/Makefile ]; then - if [ ! -n "m4" ]; then - mkdir -m 777 m4 - fi - bash_exec "autoreconf -i -f" - echo_success "Invoking autogen" - bash_exec "libtoolize" - bash_exec "./autogen.sh" - cd ./$OBJ_DIR - echo_success "Invoking configure" - if [ $DEBUG -ne 0 ]; then - ../configure --enable-debug --enable-standalone-epc --enable-gtp1u-in-kernel LDFLAGS=-L/usr/local/lib - else - ../configure --enable-standalone-epc --enable-gtp1u-in-kernel LDFLAGS=-L/usr/local/lib - fi - else - cd ./$OBJ_DIR - fi - -# pkill oai_epc -# pkill tshark - - if [ -f Makefile ]; then - echo_success "Compiling..." - make -j $NUM_CPU - if [ $? -ne 0 ]; then - echo_error "Build failed, exiting" - return 1 - else - cp -pf ./OAI_EPC/oai_epc $OPENAIR_TARGETS/bin - fi - else - echo_error "Configure failed, exiting" - return 1 - fi - - cd $OPENAIR3_DIR/GTPV1-U/GTPUAH; - make - if [ $? -ne 0 ]; then - echo_error "Build GTPUAH module failed, exiting" - return 1 - else - $SUDO cp -pfv ./Bin/libxt_*.so /lib/xtables - $SUDO cp -pfv ./Bin/*.ko $OPENAIR_TARGETS/bin - fi - - cd $OPENAIR3_DIR/GTPV1-U/GTPURH; - make - if [ $? -ne 0 ]; then - echo_error "Build GTPURH module failed, exiting" - return 1 - else - $SUDO cp -pfv ./Bin/libxt_*.so /lib/xtables - $SUDO cp -pfv ./Bin/*.ko $OPENAIR_TARGETS/bin - fi - return 0 -} - -compile_exmimo2_driver() { - cd $OPENAIR_TARGETS/ARCH/EXMIMO/DRIVER/eurecom && make clean && make || exit 1 - cd $OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT && make clean && make || exit 1 - # TO DO CHECKS... -} - - -compile_ltesoftmodem() { - cd $OPENAIR_TARGETS/RT/USER - if [ -f Makefile ]; then - rm -f ./lte-softmodem - echo "LTE softmodem compiling directives: $SOFTMODEM_DIRECTIVES" - if [ $OAI_CLEAN -ne 0 ]; then - echo "Cleaning LTE softmodem" - make cleanall > /dev/null 2>&1 - fi - make -j $NUM_CPU $SOFTMODEM_DIRECTIVES - if [ $? -ne 0 ]; then - # to locate easily compilation error in log file - make $SOFTMODEM_DIRECTIVES - fi - if [ $? -ne 0 ]; then - if [ ! -f ./lte-softmodem ]; then - echo_error "Build lte-softmodem failed, returning" - return 1 - else - cp -pf ./lte-softmodem $OPENAIR_TARGETS/bin - return 0 - fi - else - cp -pf ./lte-softmodem $OPENAIR_TARGETS/bin - return 0 - fi - else - echo_error "make file for oai softmodem not found, returning" - return 1 - fi -} - -compile_oaisim() { - cd $OPENAIR_TARGETS/SIMU/USER - if [ -f Makefile ]; then - echo "Compiling for oaisim target ($OAISIM_DIRECTIVES)" - make cleanall > /dev/null - make -j $NUM_CPU $OAISIM_DIRECTIVES - if [ $? -ne 0 ]; then - echo_error "Build oaisim failed, returning" - return 1 - else - cp -pf ./oaisim $OPENAIR_TARGETS/bin - return 0 - fi - else - echo_error "Makefile not found for oaisim target, returning" - return 1 - fi -} - -compile_unisim() { - cd $OPENAIR1_DIR/SIMULATION/LTE_PHY - if [ -f Makefile ]; then - echo "Compiling for UNISIM target ..." - make cleanall - make -j $NUM_CPU all - if [ $? -ne 0 ]; then - echo_error "Build unisim failed, returning" - return 1 - else - cp -pf ./dlsim $OPENAIR_TARGETS/bin - cp -pf ./ulsim $OPENAIR_TARGETS/bin - cp -pf ./pucchsim $OPENAIR_TARGETS/bin - cp -pf ./prachsim $OPENAIR_TARGETS/bin - cp -pf ./pdcchsim $OPENAIR_TARGETS/bin - cp -pf ./pbchsim $OPENAIR_TARGETS/bin - cp -pf ./mbmssim $OPENAIR_TARGETS/bin - return 0 - fi - else - echo_error "Configure failed, exiting" - return 1 - fi -} - -compile_nas_tools() { - - export NVRAM_DIR=$OPENAIR_TARGETS/bin - - cd $NVRAM_DIR - - if [ ! -f /tmp/nas_cleaned ]; then - echo_success "make --directory=$OPENAIR3_DIR/NAS/EURECOM-NAS/tools veryveryclean" - make --directory=$OPENAIR3_DIR/NAS/EURECOM-NAS/tools veryveryclean - fi - echo_success "make --directory=$OPENAIR3_DIR/NAS/EURECOM-NAS/tools all" - make --directory=$OPENAIR3_DIR/NAS/EURECOM-NAS/tools all - rm .ue.nvram0 - rm .usim.nvram0 - touch /tmp/nas_cleaned -} - - -compile_ue_ip_nw_driver() { - cd $OPENAIR2_DIR && make ue_ip.ko -} - -################################################ -# 1. check if the executable functions exist -############################################### - -check_for_ltesoftmodem_executable() { - if [ ! -f $OPENAIR_TARGETS/RT/USER/lte-softmodem ]; then - echo_error "Cannot find lte-softmodem executable object in directory $OPENAIR_TARGETS/RT/USER" - echo_error "Check the compilation logs in bin/install_log.txt" - exit 1 - fi -} - -check_for_epc_executable() { - if [ ! -f $OPENAIR3_DIR/objs/OAI_EPC/oai_epc ]; then - echo_error "Cannot find oai_epc executable object in directory $OPENAIR3_DIR/objs/OAI_EPC/" - echo_fatal "Please make sure you have compiled OAI EPC with --enable-standalone-epc option" - fi -} - -check_for_hss_executable() { - if [ ! -f $OPENAIR3_DIR/OPENAIRHSS/objs/openair-hss ]; then - echo_error "Cannot find openair-hss executable object in directory $OPENAIR3_DIR/OPENAIRHSS/objs/" - echo_fatal "Please make sure you have compiled OAI HSS" - fi -} - -check_for_sgw_executable() { - if [ ! -f $OPENAIR3_DIR/objs/OAI_SGW/oai_sgw ]; then - echo_error "Cannot find oai_sgw executable object in directory $OPENAIR3_DIR/OPENAIRMME/objs/OAI_SGW/" - echo_fatal "Please make sure you have compiled OAI EPC without --enable-standalone-epc option" - fi -} - -check_for_oaisim_executable() { - if [ ! -f $OPENAIR_TARGETS/SIMU/USER/oaisim ]; then - echo_error "Cannot find oaisim executable object in directory $OPENAIR_TARGETS/SIMU/USER" - echo_error "Check the compilation logs in bin/install_log.txt" - fi -} - -check_for_dlsim_executable() { - if [ ! -f $OPENAIR1_DIR/SIMULATION/LTE_PHY/dlsim ]; then - echo_error "Cannot find dlsim executable object in directory $OPENAIR1_DIR/SIMULATION/LTE_PHY" - echo_error "Check the compilation logs in bin/install_log.txt" - fi -} - -check_for_ulsim_executable() { - if [ ! -f $OPENAIR1_DIR/SIMULATION/LTE_PHY/ulsim ]; then - echo_error "Cannot find ulsim executable object in directory $OPENAIR1_DIR/SIMULATION/LTE_PHY" - echo_error "Check the compilation logs in bin/install_log.txt" - fi -} - -check_for_pucchsim_executable() { - if [ ! -f $OPENAIR1_DIR/SIMULATION/LTE_PHY/pucchsim ]; then - echo_error "Cannot find pucchsim executable object in directory $OPENAIR1_DIR/SIMULATION/LTE_PHY" - echo_error "Check the compilation logs in bin/install_log.txt" - fi -} - -check_for_prachsim_executable() { - if [ ! -f $OPENAIR1_DIR/SIMULATION/LTE_PHY/prachsim ]; then - echo_error "Cannot find prachsim executable object in directory $OPENAIR1_DIR/SIMULATION/LTE_PHY" - echo_error "Check the compilation logs in bin/install_log.txt" - fi -} - -check_for_pdcchsim_executable() { - if [ ! -f $OPENAIR1_DIR/SIMULATION/LTE_PHY/pdcchsim ]; then - echo_error "Cannot find pdcchsim executable object in directory $OPENAIR1_DIR/SIMULATION/LTE_PHY" - echo_error "Check the compilation logs in bin/install_log.txt" - fi -} - -check_for_pbchsim_executable() { - if [ ! -f $OPENAIR1_DIR/SIMULATION/LTE_PHY/pbchsim ]; then - echo_error "Cannot find pbchsim executable object in directory $OPENAIR1_DIR/SIMULATION/LTE_PHY" - echo_error "Check the compilation logs in bin/install_log.txt" - fi -} - -check_for_mbmssim_executable() { - if [ ! -f $OPENAIR1_DIR/SIMULATION/LTE_PHY/mbmssim ]; then - echo_error "Cannot find mbmssim executable object in directory $OPENAIR1_DIR/SIMULATION/LTE_PHY" - echo_error "Check the compilation logs in bin/install_log.txt" - fi -} - -check_for_nas_ue_executable() { - if [ ! -f $OPENAIR3_DIR/NAS/EURECOM-NAS/bin/UserProcess ]; then - echo_error "Cannot find UserProcess executable object in directory $OPENAIR3_DIR/NAS/EURECOM-NAS/bin" - echo_fatal "Check the compilation logs in bin/install_log.txt" - fi -} - -################################################ -# 1. check if the executable functions exist -############################################### - -# arg1 is RT -# arg2 is HW -# arg3 is ENB_S1 -install_ltesoftmodem() { - # RT - if [ $1 = "RTAI" ]; then - if [ ! -f /tmp/init_rt_done.tmp ]; then - echo_info " 8.1 Insert RTAI modules" - $SUDO insmod /usr/realtime/modules/rtai_hal.ko > /dev/null 2>&1 - $SUDO insmod /usr/realtime/modules/rtai_sched.ko > /dev/null 2>&1 - $SUDO insmod /usr/realtime/modules/rtai_sem.ko > /dev/null 2>&1 - $SUDO insmod /usr/realtime/modules/rtai_fifos.ko > /dev/null 2>&1 - $SUDO insmod /usr/realtime/modules/rtai_mbx.ko > /dev/null 2>&1 - $SUDO touch /tmp/init_rt_done.tmp - $SUDO chmod 666 /tmp/init_rt_done.tmp - else - echo_warning " 8.1 RTAI modules already inserted" - fi - fi - #HW - if [ $2 = "EXMIMO" ]; then - echo_info " 8.2 [EXMIMO] creating RTAI fifos" - for i in `seq 0 64`; do - have_rtfX=`ls /dev/ |grep -c rtf$i`; - if [ "$have_rtfX" -eq 0 ] ; then - $SUDO mknod -m 666 /dev/rtf$i c 150 $i; - fi; - done - echo_info " 8.3 [EXMIMO] Build lte-softmodemdrivers" - cd $OPENAIR_TARGETS/ARCH/EXMIMO/DRIVER/eurecom && make clean && make # || exit 1 - cd $OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT && make clean && make # || exit 1 - - echo_info " 8.4 [EXMIMO] Setup RF card" - cd $OPENAIR_TARGETS/RT/USER - . ./init_exmimo2.sh - else - if [ $2 = "USRP" ]; then - echo_info " 8.2 [USRP] " - fi - - fi - - # ENB_S1 - if [ $3 = 0 ]; then - cd $OPENAIR2_DIR && make clean && make nasmesh_netlink.ko #|| exit 1 - cd $OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL && make clean && make # || exit 1 - fi - -} - -# arg1 is ENB_S1 'boolean' -install_oaisim() { - if [ $1 = 0 ]; then - cd $OPENAIR2_DIR && make clean && make nasmesh_netlink.ko #|| exit 1 - cd $OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL && make clean && make # || exit 1 - else - compile_ue_ip_nw_driver - install_nas_tools - fi - -} - - -install_nas_tools() { - cd $OPENAIR_TARGETS/bin - if [ ! -f .ue.nvram0 ]; then - echo_success "generate .ue_emm.nvram0 .ue.nvram0" - $OPENAIR3_DIR/NAS/EURECOM-NAS/bin/ue_data --gen - fi - - if [ ! -f .usim.nvram0 ]; then - echo_success "generate .usim.nvram0" - $OPENAIR3_DIR/NAS/EURECOM-NAS/bin/usim_data --gen - fi - $OPENAIR3_DIR/NAS/EURECOM-NAS/bin/ue_data --print - $OPENAIR3_DIR/NAS/EURECOM-NAS/bin/usim_data --print -} - -install_nasmesh(){ - echo_success "LOAD NASMESH IP DRIVER FOR UE AND eNB" - (cd $OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL && make clean && make) - (cd $OPENAIR2_DIR && make clean && make nasmesh_netlink_address_fix.ko) - $SUDO rmmod nasmesh - $SUDO insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko -} - -################################## -# create HSS DB -################################ - -# arg 1 is mysql user (root) -# arg 2 is mysql password (linux) -# arg 3 is hss username (hssadmin) -# arg 4 is hss password (admin) -# arg 5 is database name (oai_db) -create_hss_database(){ - EXPECTED_ARGS=5 - E_BADARGS=65 - MYSQL=`which mysql` - rv=0 - if [ $# -ne $EXPECTED_ARGS ] - then - echo_fatal "Usage: $0 dbuser dbpass hssuser hsspass databasename" - rv=1 - fi - - set_openair_env - - # removed % - #Q1="GRANT ALL PRIVILEGES ON *.* TO '$3'@'%' IDENTIFIED BY '$4' WITH GRANT OPTION;" - Q1="GRANT ALL PRIVILEGES ON *.* TO '$3'@'localhost' IDENTIFIED BY '$4' WITH GRANT OPTION;" - Q2="FLUSH PRIVILEGES;" - SQL="${Q1}${Q2}" - $MYSQL -u $1 --password=$2 -e "$SQL" - if [ $? -ne 0 ]; then - echo_error "$3 permissions failed" - return 1 - else - echo_success "$3 permissions succeeded" - fi - - - Q1="CREATE DATABASE IF NOT EXISTS ${BTICK}$5${BTICK};" - SQL="${Q1}" - $MYSQL -u $3 --password=$4 -e "$SQL" - if [ $? -ne 0 ]; then - echo_error "$5 creation failed" - return 1 - else - echo_success "$5 creation succeeded" - fi - - - # test if tables have been created - mysql -u $3 --password=$4 -e "desc $5.users" > /dev/null 2>&1 - - if [ $? -eq 1 ]; then - $MYSQL -u $3 --password=$4 $5 < $OPENAIR3_DIR/OPENAIRHSS/db/oai_db.sql - if [ $? -ne 0 ]; then - echo_error "$5 tables creation failed" - return 1 - else - echo_success "$5 tables creation succeeded" - fi - fi - - return 0 -} - -################################ -# set_openair_env -############################### -set_openair_env(){ - - fullpath=`readlink -f $BASH_SOURCE` - [ -f "/.$fullpath" ] || fullpath=`readlink -f $PWD/$fullpath` - openair_path=${fullpath%/targets/*} - openair_path=${openair_path%/openair3/*} - openair_path=${openair_path%/openair[123]/*} - - export OPENAIR_DIR=$openair_path - export OPENAIR_HOME=$openair_path - export OPENAIR1_DIR=$openair_path/openair1 - export OPENAIR2_DIR=$openair_path/openair2 - export OPENAIR3_DIR=$openair_path/openair3 - export OPENAIR3_DIR=$openair_path/openair3 - export OPENAIR_TARGETS=$openair_path/targets - -} - -######################################## -### print help -###################################### - -print_help(){ - echo_success "Name : build_oai - install and build OAI" - echo_success "Usage: build_oai.bash -a -b -c -d -e RTAI -m -r REL8 -s -t OAISIM -w EXMIMO -x" - echo_success "-a | --doxygen : Enable doxygen for documentation (default disabled)" - echo_success "-b | --disable-s1 : Disable S1 interface for eNB (default enabled)" - echo_success "-c | --clean : Enable clean OAI build (default disabled)" - echo_success "-C | --config-file : Set the config file local path" - echo_success "-d | --debug : Enable debug mode (default disabled)" - echo_success "-D | --disable-check-installed-software : Disable the checking of installed software (default is check)" - echo_success "-e | --realtime : Set realtime mode: RTAI, NONE (default NONE)" - echo_success "-g | --run-with-gdb : Run the executable built by this script with gdb" - echo_success "-K | --itti-dump-file : Set the execution events trace file" - echo_success "-l | --build-target : Set the LTE build target: ENB,EPC,HSS,NONE (default ENB)" - echo_success "-m | --build-from-makefile : Enable build from the makefile (default disabled)" - echo_success "-r | --3gpp-release : Set the release: REL8, REL10 (default REL8)" - echo_success "-p | --wireshark : enable wireshark interface for L2 pdus" - echo_success "-R | --run : Run the executable built by this script" - echo_success "-s | --check : Enable OAI testing and sanity check (default disabled)" - echo_success "-t | --enb-build-target : Set the eNB build target: ALL, SOFTMODEM,OAISIM,UNISIM (default ALL)" - echo_success "-V | --vcd : Log vcd events" - echo_success "-w | --hardware : Set the hardware platform: EXMIMO, USRP (also installs UHD driver), ETHERNET, NONE, (default EXMIMO)" - echo_success "-x | --xforms : Enable xforms (default disabled)" - echo_success "-z | --defaults : Set the default build options" -} - -print_help_perf(){ - echo_success "Name : perf_oai generate traffic and evaluate the performance " - echo_success "Usage: perf_oai.bash -l ITG " - echo_success "-l | --perf-app : Set Performance evaluation app: ITGS, ITGD,PING, OTG-OAISIM, OTG-CBA, (default PING)" - echo_success "-m | --owd : enable D-ITG one-way-delay meter (default disabled)" - echo_success "-e | --duration : set the duration of the experiment (default 60000ms)" - echo_success "-i | --idt-dist : set the distribution of the inter-departure time: CONSTANT, UNIFORM,EXPONENTIAL (default CONSTANT)" - echo_success "-s | --ps-dist : set the distribution of the inter-departure time (default CONSTANT, available options: UNIFORM,EXPONENTIAL)" - echo_success "-d | --dst : set the destination address (default 127.0.0.1)" - echo_success "-p | --dst-port : set the destination address (default NONE)" - echo_success "-t | --test : enable test mode to validate the functionality (default disabled)" - echo_success "-k | --keep-log-file : keep the log files (default disabled)" - -} -############################### -## echo and family -############################### -black='\E[30m' -red='\E[31m' -green='\E[32m' -yellow='\E[33m' -blue='\E[34m' -magenta='\E[35m' -cyan='\E[36m' -white='\E[37m' -reset_color='\E[00m' - - -cecho() # Color-echo -# arg1 = message -# arg2 = color -{ - local default_msg="No Message." - message=${1:-$default_msg} - color=${2:-$green} - if [ $BUILD_FROM_MAKEFILE = 0 ]; then - echo -e -n "$color$message$reset_color" - echo - else - echo "$message" - fi - return -} - -echo_error() { - local my_string="" - until [ -z "$1" ] - do - my_string="$my_string$1" - shift - done - cecho "$my_string" $red -} - -echo_fatal() { - local my_string="" - until [ -z "$1" ] - do - my_string="$my_string$1" - shift - done - echo_error "$my_string" - exit -1 -} - -echo_warning() { - local my_string="" - until [ -z "$1" ] - do - my_string="$my_string$1" - shift - done - cecho "$my_string" $yellow -} - -echo_success() { - local my_string="" - until [ -z "$1" ] - do - my_string="$my_string$1" - shift - done - cecho "$my_string" $green -} -echo_info() { - local my_string="" - until [ -z "$1" ] - do - my_string="$my_string$1" - shift - done - cecho "$my_string" $blue -} - -bash_exec() { - output=$($1 2>&1) - result=$? - if [ $result -eq 0 ]; then - echo_success "$1" - else - echo_error "$1: $output" - fi -} - - -wait_process_started () { - if [ -z "$1" ]; then - echo_error "WAITING FOR PROCESS START: NO PROCESS" - return 1 - fi - ps -C $1 > /dev/null 2>&1 - while [ $? -ne 0 ]; do - echo_warning "WAITING FOR $1 START" - sleep 2 - ps -C $1 > /dev/null 2>&1 - done - echo_success "PROCESS $1 STARTED" - return 0 -} - -is_process_started () { - if [ -z "$1" ]; then - echo_error "WAITING FOR PROCESS START: NO PROCESS" - return 1 - fi - ps -C $1 > /dev/null 2>&1 - if [ $? -ne 0 ]; then - echo_success "PROCESS $1 NOT STARTED" - return 1 - fi - echo_success "PROCESS $1 STARTED" - return 0 -} - -assert() { - # If condition false - # exit from script with error message - E_PARAM_ERR=98 - E_PARAM_FAILED=99 - - if [ -z "$2" ] ; then # Not enought parameters passed. - return $E_PARAM_ERR - fi - - lineno=$2 - if [ ! $1 ]; then - echo_error "Assertion failed: \"$1\"" - echo_fatal "File \"$0\", line $lineno" - fi -} diff --git a/targets/build_oai.bash b/targets/build_oai.bash deleted file mode 100755 index 05b14a541b..0000000000 --- a/targets/build_oai.bash +++ /dev/null @@ -1,840 +0,0 @@ -#/* -# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more -# * contributor license agreements. See the NOTICE file distributed with -# * this work for additional information regarding copyright ownership. -# * The OpenAirInterface Software Alliance licenses this file to You under -# * the OAI Public License, Version 1.1 (the "License"); you may not use this file -# * except in compliance with the License. -# * You may obtain a copy of the License at -# * -# * http://www.openairinterface.org/?page_id=698 -# * -# * Unless required by applicable law or agreed to in writing, software -# * distributed under the License is distributed on an "AS IS" BASIS, -# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# * See the License for the specific language governing permissions and -# * limitations under the License. -# *------------------------------------------------------------------------------- -# * For more information about the OpenAirInterface (OAI) Software Alliance: -# * contact@openairinterface.org -# */ -################################################################################ -# file build_oai.bash -# brief OAI automated build tool that can be used to install, compile, run OAI. -# author Navid Nikaein, Lionel GAUTHIER -# company Eurecom -# email: navid.nikaein@eurecom.fr, lionel.gauthier@eurecom.fr -# - -#!/bin/bash -################################ -# include helper functions -################################ -THIS_SCRIPT_PATH=$(dirname $(readlink -f $0)) -. $THIS_SCRIPT_PATH/build_helper.bash - -check_for_root_rights - -####################################### -# Default PARAMETERS -###################################### -declare OAI_DB_ADMIN_USER_NAME="root" -declare OAI_DB_ADMIN_USER_PASSWORD="linux" - -#only one could be set at the time -declare BUILD_LTE="NONE" # ENB, EPC, HSS - -declare HW="EXMIMO" # EXMIMO, USRP, ETHERNET, NONE -declare TARGET="ALL" # ALL, SOFTMODEM, OAISIM, UNISIM, NONE -declare ENB_S1=1 -declare REL="REL8" # REL8, REL10 -declare RT="NONE" # RTAI, RT_PREMPT, NONE -declare DEBUG=0 -declare CONFIG_FILE=" " -declare CONFIG_FILE_ACCESS_OK=0 -declare EXE_ARGUMENTS=" " -declare RUN_GDB=0 -declare RUN=0 -declare DISABLE_CHECK_INSTALLED_SOFTWARE=0 -declare OAI_CLEAN=0 -declare CLEAN_IPTABLES=0 -declare CLEAN_HSS=0 - -declare OAI_TEST=0 -declare XFORMS=0 - -# script is not currently handling these params -declare EPC=0 # flag to build EPC - -declare ITTI_ANALYZER=0 -declare VCD_TIMING=0 -declare WIRESHARK=0 -declare TIME_MEAS=0 -declare DOXYGEN=0 -declare DEV=0 - -#EMULATION_DEV_INTERFACE="eth0" -#EMULATION_MULTICAST_GROUP=1 -#EMULATION_DEV_ADDRESS=`ifconfig $EMULATION_DEV_INTERFACE | grep 'inet addr:'| grep -v '127.0.0.1' | cut -d: -f2 | awk '{ print $1}'` - -############## script params ##################### - -if [ -f ./.lock_oaibuild ]; then - OAI_CLEAN=0 -else - OAI_CLEAN=1 -fi - -#for i in "$@" -#do -# echo "i is : $i" -# case $i in - - - until [ -z "$1" ] - do - case "$1" in - -a | --doxygen) - DOXYGEN=1 - echo "setting doxygen flag to: $DOXYGEN" - shift; - ;; - -b | --disable-s1) - ENB_S1=0 - echo "disable eNB S1 flag" - shift; - ;; - -c | --clean) - rm -rf ./.lock_oaibuild - OAI_CLEAN=1 - CLEAN_HSS=1 - echo "setting clean flag to: $OAI_CLEAN" - echo "may check package installation, and recompile OAI" - shift; - ;; - --clean-iptables) - CLEAN_IPTABLES=1; - shift; - ;; - -C | --config-file) - CONFIG_FILE=$2 - # may be relative path - if [ -f $(dirname $(readlink -f $0))/$CONFIG_FILE ]; then - CONFIG_FILE=$(dirname $(readlink -f $0))/$CONFIG_FILE - echo "setting config file to: $CONFIG_FILE" - CONFIG_FILE_ACCESS_OK=1 - else - # may be absolute path - if [ -f $CONFIG_FILE ]; then - echo "setting config file to: $CONFIG_FILE" - CONFIG_FILE_ACCESS_OK=1 - else - echo "config file not found" - exit 1 - fi - fi - EXE_ARGUMENTS="$EXE_ARGUMENTS -O $CONFIG_FILE" - shift 2; - ;; - -d | --debug) - DEBUG=1 - echo "setting debug flag to: $DEBUG" - shift; - ;; - -D | --disable-check-installed-software) - DISABLE_CHECK_INSTALLED_SOFTWARE=1 - echo "disable check installed software" - shift; - ;; - -e | --realtime) - RT=$2 - echo "setting realtime flag to: $RT" - shift 2 ; - ;; - -g | --run-with-gdb) - DEBUG=1 - RUN=1 - RUN_GDB=1 - echo "Running with gdb" - shift; - ;; - -K | --itti-dump-file) - ITTI_ANALYZER=1 - ITTI_DUMP_FILE=$2 - echo "setting ITTI dump file to: $ITTI_DUMP_FILE" - EXE_ARGUMENTS="$EXE_ARGUMENTS -K $ITTI_DUMP_FILE" - shift 2; - ;; - -l | --build-target) - BUILD_LTE=$2 - echo "setting top-level build target to: $2" - shift 2; - ;; - -h | --help) - print_help - exit -1 - ;; - -m | --build-from-makefile) - BUILD_FROM_MAKEFILE=1 - set_build_from_makefile $BUILD_FROM_MAKEFILE - echo "setting a flag to build from makefile to: $BUILD_FROM_MAKEFILE" - shift; - ;; - -r | --3gpp-release) - REL=$2 - echo "setting release to: $REL" - shift 2 ; - ;; - -R | --run) - RUN=1 - echo "setting run to $RUN" - shift; - ;; - -s | --check) - OAI_TEST=1 - echo "setting sanity check to: $OAI_TEST" - shift; - ;; - -t | --enb-build-target) - TARGET=$2 - echo "setting enb build target to: $TARGET" - shift 2; - ;; - -V | --vcd) - echo "setting gtk-wave output" - VCD_TIMING=1 - EXE_ARGUMENTS="$EXE_ARGUMENTS -V" - shift ; - ;; - -w | --hardware) - HW="$2" #"${i#*=}" - echo "setting hardware to: $HW" - shift 2 ; - ;; - -x | --xforms) - XFORMS=1 - EXE_ARGUMENTS="$EXE_ARGUMENTS -d" - echo "setting xforms to: $XFORMS" - shift; - ;; - -p | --wireshark) - WIRESHARK=1 - echo "enabling Wireshark interface to $WIRESHARK" - shift; - ;; - -z | --defaults) - echo "setting all parameters to: default" - rm -rf ./.lock_oaibuild - OAI_CLEAN=1 - HW="EXMIMO" - TARGET="ALL" - ENB_S1=1 - REL="REL8" - RT="NONE" - DEBUG=0 - ENB_CONFIG_FILE=$OPENAIR_TARGETS/"PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.conf" - OAI_TEST=0 - shift ; - ;; - *) - echo "Unknown option $1" - break ; - # unknown option - ;; - esac -done - -##################### -# create a bin dir -##################### -echo_info "1. Creating the bin dir ..." -mkdir -m 777 bin - -build_date=`date +%Y_%m_%d` -oai_build_date="oai_built_${build_date}" -touch bin/${oai_build_date} -chmod -f 777 bin/${oai_build_date} - -touch bin/install_log.txt -chmod -f 777 bin/install_log.txt -################################ -# cleanup first -################################ -#echo_info "3. Cleaning ..." - -#$SUDO kill -9 `ps -ef | grep oaisim | awk '{print $2}'` 2>&1 -#$SUDO kill -9 `ps -ef | grep lte-softmodem | awk '{print $2}'` 2>&1 -#$SUDO kill -9 `ps -ef | grep dlsim | awk '{print $2}'` 2>&1 -#$SUDO kill -9 `ps -ef | grep ulsim | awk '{print $2}'` 2>&1 - -if [ $CLEAN_IPTABLES -eq 1 ]; then - echo_info "Flushing iptables..." - $SUDO modprobe ip_tables - $SUDO modprobe x_tables - $SUDO iptables -P INPUT ACCEPT - $SUDO iptables -F INPUT - $SUDO iptables -P OUTPUT ACCEPT - $SUDO iptables -F OUTPUT - $SUDO iptables -P FORWARD ACCEPT - $SUDO iptables -F FORWARD - $SUDO iptables -t nat -F - $SUDO iptables -t mangle -F - $SUDO iptables -t filter -F - $SUDO iptables -t raw -F - echo_info "Flushed iptables" -fi -############################################ -# setting and printing OAI envs, we should check here -############################################ - -echo_info "2. Setting the OAI PATHS ..." - -set_openair_env -cecho "OPENAIR_HOME = $OPENAIR_HOME" $green -cecho "OPENAIR1_DIR = $OPENAIR1_DIR" $green -cecho "OPENAIR2_DIR = $OPENAIR2_DIR" $green -cecho "OPENAIR3_DIR = $OPENAIR3_DIR" $green -cecho "OPENAIR3_DIR = $OPENAIR3_DIR" $green -cecho "OPENAIR_TARGETS = $OPENAIR_TARGETS" $green - - -echo "OPENAIR_HOME = $OPENAIR_HOME" >> bin/${oai_build_date} -echo "OPENAIR1_DIR = $OPENAIR1_DIR" >> bin/${oai_build_date} -echo "OPENAIR2_DIR = $OPENAIR2_DIR" >> bin/${oai_build_date} -echo "OPENAIR3_DIR = $OPENAIR3_DIR" >> bin/${oai_build_date} -echo "OPENAIR3_DIR = $OPENAIR3_DIR" >> bin/${oai_build_date} -echo "OPENAIR_TARGETS = $OPENAIR_TARGETS" >> bin/${oai_build_date} - - -build_enb(){ - -########################################## -# process parameters -######################################### - - echo_info "4. Process the parameters" - - echo_info "User-defined Parameters : HW=$HW, TARGET=$TARGET, ENB_S1=$ENB_S1, REL=$REL, RT=$RT, DEBUG=$DEBUG XFORMS=$XFORMS" - - echo "User-defined Parameters : HW=$HW, TARGET=$TARGET, ENB_S1=$ENB_S1, REL=$REL, RT=$RT, DEBUG=$DEBUG XFORMS=$XFORMS" >> bin/${oai_build_date} - - -############################################ -# compilation directives -############################################ - - echo_info "5. building the compilation directives ..." - - - SOFTMODEM_DIRECTIVES="DEBUG=$DEBUG XFORMS=$XFORMS " - OAISIM_DIRECTIVES="DEBUG=$DEBUG XFORMS=$XFORMS " - - if [ $ENB_S1 -eq 1 ]; then - SOFTMODEM_DIRECTIVES="$SOFTMODEM_DIRECTIVES USE_MME=R10 ENABLE_ITTI=1 LINK_ENB_PDCP_TO_GTPV1U=1 SECU=1 " - #OAISIM_DIRECTIVES="$OAISIM_DIRECTIVES USE_MME=R10 ENABLE_ITTI=1 LINK_ENB_PDCP_TO_GTPV1U=1 SECU=1 " - OAISIM_DIRECTIVES="$OAISIM_DIRECTIVES ENABLE_ITTI=1 LINK_ENB_PDCP_TO_GTPV1U=1 SECU=1 " - fi - - if [ $DEBUG -eq 0 ]; then - SOFTMODEM_DIRECTIVES="$SOFTMODEM_DIRECTIVES DISABLE_XER_PRINT=1 " - OAISIM_DIRECTIVES="$OAISIM_DIRECTIVES DISABLE_XER_PRINT=1 " - fi - - if [ $HW = "USRP" ]; then - SOFTMODEM_DIRECTIVES="$SOFTMODEM_DIRECTIVES USRP=1 " - fi - - if [ $HW = "ADRV9371_ZC706" ]; then - SOFTMODEM_DIRECTIVES="$SOFTMODEM_DIRECTIVES ADRV9371_ZC706=1 " - fi - - if [ $HW = "EXMIMO" ]; then - SOFTMODEM_DIRECTIVES="$SOFTMODEM_DIRECTIVES EXMIMO=1 " - fi - - if [ $HW = "ETHERNET" ]; then - SOFTMODEM_DIRECTIVES="$SOFTMODEM_DIRECTIVES ETHERNET=1 " - fi - - if [ $ENB_S1 -eq 0 ]; then - SOFTMODEM_DIRECTIVES="$SOFTMODEM_DIRECTIVES NAS=1 " - OAISIM_DIRECTIVES="$OAISIM_DIRECTIVES NAS=1 " - fi - - if [ $REL = "REL8" ]; then - SOFTMODEM_DIRECTIVES="$SOFTMODEM_DIRECTIVES Rel8=1 " - OAISIM_DIRECTIVES="$OAISIM_DIRECTIVES Rel8=1 " - else - SOFTMODEM_DIRECTIVES="$SOFTMODEM_DIRECTIVES Rel10=1 " - OAISIM_DIRECTIVES="$OAISIM_DIRECTIVES Rel10=1 " - fi - - if [ $RT = "RTAI" ]; then - if [ ! -f /usr/realtime/modules/rtai_hal.ko ]; then - echo_warning "RTAI doesn't seem to be installed" - RT="NONE" - SOFTMODEM_DIRECTIVES="$SOFTMODEM_DIRECTIVES RTAI=0 " - else - SOFTMODEM_DIRECTIVES="$SOFTMODEM_DIRECTIVES HARD_RT=1 " - fi - else - SOFTMODEM_DIRECTIVES="$SOFTMODEM_DIRECTIVES RTAI=0 " - RT="NONE" - fi - - if [ $TARGET != "ALL" ]; then - if [ $TARGET != "SOFTMODEM" ]; then - HW="NONE" - fi - fi - - if [ $UBUNTU_REL = "12.04" ]; then - output=$(check_for_machine_type 2>&1) - MACHINE_ARCH=$? - if [ $MACHINE_ARCH -eq 64 ]; then - SOFTMODEM_DIRECTIVES="$SOFTMODEM_DIRECTIVES LIBCONFIG_LONG=1 " - OAISIM_DIRECTIVES="$OASIM_DIRECTIVES LIBCONFIG_LONG=1 " - fi - fi - - echo_success "SOFTMODEM Compilation directives: $SOFTMODEM_DIRECTIVES" - echo_success "OAISIM Compilation directives: $OAISIM_DIRECTIVES" - - echo "SOFTMODEM Compilation directives: $SOFTMODEM_DIRECTIVES" >> bin/${oai_build_date} - echo "OAISIM Compilation directive: $OAISIM_DIRECTIVES" >> bin/${oai_build_date} - - -############################################ -# check the installation -############################################ - if [ $DISABLE_CHECK_INSTALLED_SOFTWARE -eq 0 ]; then - echo_info "6. Checking the the required softwares/packages ..." - - check_install_oai_software - if [ $HW = "USRP" ]; then - check_install_usrp_uhd_driver - fi - check_install_asn1c - check_install_nettle - else - echo_info "6. Not checking the required softwares/packages ..." - touch ./.lock_oaibuild - fi - -############################################ -# compile -############################################ - - echo_info "7. compiling and installing the OAI binaries ..." - - softmodem_compiled=1 - oaisim_compiled=1 - unisim_compiled=1 - - if [ $TARGET = "ALL" ]; then - echo "############# compile_ltesoftmodem #############" >> bin/install_log.txt - output=$(compile_ltesoftmodem >> bin/install_log.txt 2>&1 ) - softmodem_compiled=$? - check_for_ltesoftmodem_executable - echo_info "7.1 finished ltesoftmodem target : check the installation log file bin/install_log.txt" - - echo "################ compile_oaisim #################" >> bin/install_log.txt - output=$(compile_oaisim >> bin/install_log.txt 2>&1 ) - oaisim_compiled=$? - check_for_oaisim_executable - echo_info "7.2 finished oaisim target : check the installation log file bin/install_log.txt" - - echo "################## compile_unisim ##################" >> bin/install_log.txt - output=$(compile_unisim >> bin/install_log.txt 2>&1 ) - unisim_compiled=$? - check_for_dlsim_executable - check_for_ulsim_executable - check_for_pucchsim_executable - check_for_prachsim_executable - check_for_pdcchsim_executable - check_for_pbchsim_executable - check_for_mbmssim_executable - echo_info "7.3 finished unisim target : check the installation log file bin/install_log.txt" - - - else - if [ $TARGET == "SOFTMODEM" ]; then - echo "############# compile_ltesoftmodem #############" >> bin/install_log.txt - output=$(compile_ltesoftmodem >> bin/install_log.txt 2>&1 ) - softmodem_compiled=$? - check_for_ltesoftmodem_executable - echo_info "7.1 finished ltesoftmodem target: check the installation log file bin/install_log.txt" - - if [ $HW == "EXMIMO" ]; then - output=$(compile_exmimo2_driver >> bin/install_log.txt 2>&1) - fi - fi - if [ $TARGET = "OAISIM" ]; then - echo "################ compile_oaisim #################" >> bin/install_log.txt - output=$(compile_oaisim >> bin/install_log.txt 2>&1 ) - oaisim_compiled=$? - check_for_oaisim_executable - echo_info "7.2 finished oaisim target: check the installation log file bin/install_log.txt" - - if [ $ENB_S1 -eq 1 ]; then - compile_nas_tools 2>&1 - nas_tools_compiled=$? - check_for_nas_tools_executable - echo_info "7.2.1 finished nas ue target: check the installation log file bin/install_log.txt" - fi - fi - if [ $TARGET = "UNISIM" ]; then - echo "################## compile_unisim ##################" >> bin/install_log.txt - output=$(compile_unisim >> bin/install_log.txt 2>&1 ) - unisim_compiled=$? - check_for_dlsim_executable - check_for_ulsim_executable - check_for_pucchsim_executable - check_for_prachsim_executable - check_for_pdcchsim_executable - check_for_pbchsim_executable - check_for_mbmssim_executable - echo_info "7.3 finished unisim target: check the installation log file bin/install_log.txt" - fi - fi - - -############################################ -# install -############################################ - - echo_info "8. Installing ..." - - if [ $softmodem_compiled -eq 0 ]; then - echo_success "target lte-softmodem built and installed in the bin directory" - echo "target lte-softmodem built and installed in the bin directory" >> bin/${oai_build_date} - output=$(install_ltesoftmodem $RT $HW $ENB_S1 ) - fi - if [ $oaisim_compiled -eq 0 ]; then - echo_success "target oaisim built and installed in the bin directory" - echo "target oaisim built and installed in the bin directory" >> bin/${oai_build_date} - output=$(install_oaisim $ENB_S1 ) - fi - if [ $unisim_compiled -eq 0 ]; then - echo_success "target unisim built and installed in the bin directory" - echo "target unisim built and installed in the bin directory" >> bin/${oai_build_date} - fi - - echo_info "build terminated, binaries are located in bin/" - echo_info "build terminated, logs are located in bin/${oai_build_date} and bin/install_log.txt" - - - -} -build_epc(){ - - epc_compiled=1 - - echo_info "Note: this scripts tested only on Ubuntu 14.04x64" - -###################################### -# CHECK MISC SOFTWARES AND LIBS # -###################################### - if [ $DISABLE_CHECK_INSTALLED_SOFTWARE -eq 0 ]; then - echo_info "4. Checking the the required softwares/packages for EPC..." - - check_install_epc_software - check_install_asn1c - if [ $OAI_CLEAN -eq 1 ]; then - check_install_freediamter - else - if [ ! -d /usr/local/etc/freeDiameter ]; then - check_install_freediamter - fi - fi - else - echo_info "4. Not checking the required softwares/packages for EPC" - fi - -########################################### -# configure and compile -########################################## - - echo_info "5. configure and compile epc" - - output=$(compile_epc $OAI_CLEAN >> $OPENAIR_TARGETS/bin/install_log.txt 2>&1 ) - epc_compiled=$? - if [ $epc_compiled -ne 0 ]; then - echo_error "EPC compilation failed : check the installation log file bin/install_log.txt" - exit 1 - fi - check_for_epc_executable - echo_info "finished epc target: check the installation log file bin/install_log.txt" - - if [ $CONFIG_FILE_ACCESS_OK -eq 0 ]; then - echo_error "You have to provide a EPC config file" - exit 1 - fi - - TEMP_FILE=`tempfile` - VARIABLES=" S6A_CONF\|\ - HSS_HOSTNAME\|\ - REALM" - - VARIABLES=$(echo $VARIABLES | sed -e 's/\\r//g') - VARIABLES=$(echo $VARIABLES | tr -d ' ') - cat $CONFIG_FILE | grep -w "$VARIABLES"| tr -d " " | tr -d ";" > $TEMP_FILE - source $TEMP_FILE - rm -f $TEMP_FILE - - if [ x"$REALM" == "x" ]; then - echo_error "Your config file do not contain a REALM for S6A configuration" - exit 1 - fi - if [ x"$S6A_CONF" != "x./epc_s6a.conf" ]; then - echo_error "Your config file do not contain the good path for the S6A config file," - echo_error "accordingly to what is done in this script, it should be set to epc_s6a.conf" - exit 1 - fi - - check_epc_s6a_certificate $REALM - -########################################### -# install the binary in bin -########################################## - - echo_info "6. install the binary file" - - if [ $epc_compiled -eq 0 ]; then - echo_success "target epc built and installed in the bin directory" - echo "target epc built and installed in the bin directory" >> bin/${oai_build_date} - cp -f $CONFIG_FILE $OPENAIR_TARGETS/bin - cp -f $OPENAIR3_DIR/objs/UTILS/CONF/s6a.conf $OPENAIR_TARGETS/bin/epc_s6a.conf - fi -} - -build_hss(){ - echo_info "Note: this script tested only for Ubuntu 12.04 x64 -> 14.04 x64" - -###################################### -# CHECK MISC SOFTWARES AND LIBS # -###################################### - if [ $DISABLE_CHECK_INSTALLED_SOFTWARE -eq 0 ]; then - echo_info "4. check the required packages for HSS" - check_install_hss_software - if [ $OAI_CLEAN -eq 1 ]; then - check_install_freediamter - else - if [ ! -d /usr/local/etc/freeDiameter ]; then - check_install_freediamter - fi - fi - else - echo_info "4. Not checking the required packages for HSS" - fi - - -###################################### -# compile HSS # -###################################### - echo_info "5. compile HSS" - - # Bad behaviour of $OAI_CLEAN with ./.lock_oaibuild ... - compile_hss $CLEAN_HSS - hss_compiled=$? - check_for_hss_executable - echo_info "finished hss target" - -###################################### -# Check certificates # -###################################### - - TEMP_FILE=`tempfile` - cat $OPENAIR3_DIR/OPENAIRHSS/conf/hss_fd.conf | grep -w "Identity" | tr -d " " | tr -d ";" > $TEMP_FILE - cat $OPENAIR3_DIR/OPENAIRHSS/conf/hss.conf | grep -w "MYSQL_user" | tr -d " " | tr -d ";" >> $TEMP_FILE - cat $OPENAIR3_DIR/OPENAIRHSS/conf/hss.conf | grep -w "MYSQL_pass" | tr -d " " | tr -d ";" >> $TEMP_FILE - cat $OPENAIR3_DIR/OPENAIRHSS/conf/hss.conf | grep -w "MYSQL_db" | tr -d " " | tr -d ";" >> $TEMP_FILE - source $TEMP_FILE - rm -f $TEMP_FILE - - if [ x"$Identity" == "x" ]; then - echo_error "Your config file do not contain a host identity for S6A configuration" - exit 1 - fi - HSS_REALM=$(echo $Identity | sed 's/.*\.//') - HSS_HOSTNAME=${Identity%.$HSS_REALM} - NEW_HOSTNAME=`hostname -s` - if [ "x$HSS_HOSTNAME" != "x$NEW_HOSTNAME" ]; then - echo_warning "Changing identity of HSS from <$HSS_HOSTNAME.$HSS_REALM> to <$NEW_HOSTNAME.$HSS_REALM>" - sed -ibak "s/$HSS_HOSTNAME/$NEW_HOSTNAME/" $OPENAIR3_DIR/OPENAIRHSS/conf/hss_fd.conf - fi - check_hss_s6a_certificate $HSS_REALM - -###################################### -# fill the HSS DB -###################################### - echo_info "6. create HSS database (for EURECOM SIM CARDS)" - hss_db_created=1 - create_hss_database $OAI_DB_ADMIN_USER_NAME $OAI_DB_ADMIN_USER_PASSWORD $MYSQL_user $MYSQL_pass $MYSQL_db - if [ $? -eq 1 ]; then - echo_fatal "hss DB not created" - fi -} - - - - -echo_info "3. set the top-level build target" -case "$BUILD_LTE" in - 'ENB') - echo_success "build LTE eNB" - build_enb - ;; - 'EPC') - echo_success "build EPC(MME and xGW)" - build_epc - ;; - 'HSS') - echo_success "build HSS" - build_hss - ;; - 'NONE') - ;; - *) - ;; -esac - -# Additional operation - -############################################ -# Generate doxygen documentation -############################################ - -if [ $DOXYGEN = 1 ]; then - echo_info "9. Generate doxygen documentation ..." - doxygen $OPENAIR_TARGETS/DOCS/Doxyfile - echo_info "9.1 use your navigator to open $OPENAIR_TARGETS/DOCS/html/index.html " -else - echo_info "9. Bypassing doxygen documentation ..." -fi - - -############################################ -# testing -############################################ - -if [ $OAI_TEST -eq 1 ]; then - echo_info "10. Running OAI pre commit tests (pre-ci) ..." - python $OPENAIR_TARGETS/TEST/OAI/test01.py -l -else - echo_info "10. Bypassing the Tests ..." -fi - -############################################ -# run -############################################ - -if [ $RUN -ne 0 ]; then - echo_info "11. Running ..." - cd $OPENAIR_TARGETS/bin - case "$BUILD_LTE" in - 'ENB') - if [ $TARGET == "SOFTMODEM" ]; then - if [ $HW == "EXMIMO" ]; then - $SUDO chmod 777 $OPENAIR_TARGETS/RT/USER/init_exmimo2.sh - $SUDO $OPENAIR_TARGETS/RT/USER/init_exmimo2.sh - fi - if [ $WIRESHARK -eq 1 ]; then - EXE_ARGUMENTS="$EXE_ARGUMENTS -W" - fi - echo "############# running ltesoftmodem #############" - if [ $RUN_GDB -eq 0 ]; then - $SUDO $OPENAIR_TARGETS/bin/lte-softmodem `echo $EXE_ARGUMENTS` - else - $SUDO setenv MALLOC_CHECK_ 2 - $SUDO touch ~/.gdb_lte_softmodem - $SUDO echo "file $OPENAIR_TARGETS/bin/lte-softmodem" > ~/.gdb_lte_softmodem - $SUDO echo "set args $EXE_ARGUMENTS" >> ~/.gdb_lte_softmodem - $SUDO echo "run" >> ~/.gdb_lte_softmodem - $SUDO gdb -nh -x ~/.gdb_lte_softmodem 2>&1 - fi - - elif [ $TARGET == "OAISIM" ]; then - - if [ $ENB_S1 -eq 0 ]; then - install_nasmesh - else - # prepare NAS for UE - if [ ! -f .ue.nvram0 ]; then - echo_success "generate .ue_emm.nvram0 .ue.nvram0" - $OPENAIR3_DIR/NAS/EURECOM-NAS/bin/ue_data --gen - fi - - if [ ! -f .usim.nvram0 ]; then - echo_success "generate .usim.nvram0" - $OPENAIR3_DIR/NAS/EURECOM-NAS/bin/usim_data --gen - fi - $OPENAIR3_DIR/NAS/EURECOM-NAS/bin/ue_data --print - $OPENAIR3_DIR/NAS/EURECOM-NAS/bin/usim_data --print - - insmod $OPENAIR2_DIR/NETWORK_DRIVER/UE_IP/ue_ip.ko - - fi - if [ $WIRESHARK -eq 1 ]; then - EXE_ARGUMENTS="$EXE_ARGUMENTS -P wireshark" - fi - if [ $RUN_GDB -eq 0 ]; then - $SUDO exec $OPENAIR_TARGETS/bin/oaisim `echo $EXE_ARGUMENTS` - else - $SUDO setenv MALLOC_CHECK_ 2 - $SUDO touch ~/.gdb_oaisim - $SUDO echo "file $OPENAIR_TARGETS/bin/lte-oaisim" > ~/.gdb_oaisim - $SUDO echo "set args $EXE_ARGUMENTS" >> ~/.gdb_oaisim - $SUDO echo "run" >> ~/.gdb_oaisim - $SUDO gdb -nh -x ~/.gdb_oaisim 2>&1 - fi - fi - ;; - - - 'EPC') - echo "############# running EPC #############" - test_is_host_reachable $HSS_HOSTNAME.$REALM HSS - if [ $RUN_GDB -eq 0 ]; then - $SUDO $OPENAIR_TARGETS/bin/oai_epc `echo $EXE_ARGUMENTS` - else - touch ~/.gdb_epc - chmod 777 ~/.gdb_epc - echo "file $OPENAIR_TARGETS/bin/oai_epc" > ~/.gdb_epc - echo "set args $EXE_ARGUMENTS" >> ~/.gdb_epc - echo "run" >> ~/.gdb_epc - $SUDO gdb -nh -x ~/.gdb_epc 2>&1 - fi - ;; - - - 'HSS') - echo "############# running HSS #############" - cd $OPENAIR3_DIR/OPENAIRHSS/objs - if [ $RUN_GDB -eq 0 ]; then - $SUDO exec ./openair-hss -c ./conf/hss.conf - else - touch ~/.gdb_hss - chmod 777 ~/.gdb_hss - echo "file ./openair-hss" > ~/.gdb_hss - echo "set args -c ./conf/hss.conf" >> ~/.gdb_hss - echo "run" >> ~/.gdb_hss - $SUDO gdb -nh -x ~/.gdb_hss 2>&1 - fi - ;; - - - 'NONE') - ;; - - - *) - echo_error "Unknown option $BUILD_LTE: do not execute" - ;; - esac -else - echo_info "11. No run requested, end of script" - exit 0 -fi - -